From 1402e6ec0d5ed60375c9deb1add9061fcb37e590 Mon Sep 17 00:00:00 2001 From: hathach Date: Thu, 15 Aug 2024 14:36:31 +0700 Subject: add flash-uniflash support for ti tm4c --- test/hil/hil_test.py | 5 +++++ 1 file changed, 5 insertions(+) (limited to 'test/hil') diff --git a/test/hil/hil_test.py b/test/hil/hil_test.py index 486f0d2eb..1d5f98e5c 100644 --- a/test/hil/hil_test.py +++ b/test/hil/hil_test.py @@ -196,6 +196,11 @@ def flash_esptool(board, firmware): return ret +def flash_uniflash(board, firmware): + ret = run_cmd(f'dslite.sh {board["flasher_args"]} -f {firmware}.hex') + return ret + + # ------------------------------------------------------------- # Tests # ------------------------------------------------------------- -- cgit v1.3.1 From 33e3ea36450a30d76113e5e356ddf5f99cdda2c5 Mon Sep 17 00:00:00 2001 From: hathach Date: Thu, 15 Aug 2024 23:46:33 +0700 Subject: remove analog PHY from musb_regs_t hil: remove ch32v203 since not reliable enough --- src/portable/mentor/musb/musb_type.h | 138 ++++++++++++----------------------- test/hil/rpi.json | 14 ++-- 2 files changed, 55 insertions(+), 97 deletions(-) (limited to 'test/hil') diff --git a/src/portable/mentor/musb/musb_type.h b/src/portable/mentor/musb/musb_type.h index 670bc2ca1..57ab2aefa 100644 --- a/src/portable/mentor/musb/musb_type.h +++ b/src/portable/mentor/musb/musb_type.h @@ -97,136 +97,94 @@ typedef struct TU_ATTR_PACKED { __IO uint8_t rx_csrl; // 0x06: RX CSRL __IO uint8_t rx_csrh; // 0x07: RX CSRH __IO uint16_t rx_count; // 0x08: RX COUNT - __IO uint8_t tx_type; // 0x0A: TX TYPE + union { + __IO uint8_t type0; // 0x0A: TYPE0 (host only) + __IO uint8_t tx_type; // 0x0A: TX TYPE + }; __IO uint8_t tx_interval; // 0x0B: TX INTERVAL __IO uint8_t rx_type; // 0x0C: RX TYPE __IO uint8_t rx_interval; // 0x0D: RX INTERVAL __IO uint8_t reserved_0x0e; // 0x0E: Reserved - __IO uint8_t fifo_size; // 0x0F: FIFO_SIZE + union { + __IO uint8_t config_data; // 0x0F: CONFIG DATA + __IO uint8_t fifo_size; // 0x0F: FIFO_SIZE + }; } musb_ep_csr_t; TU_VERIFY_STATIC(sizeof(musb_ep_csr_t) == 16, "size is not correct"); typedef struct { //------------- Common -------------// - __IO uint8_t faddr; // 0x00: FADDR - __IO uint8_t power; // 0x01: POWER + __IO uint8_t faddr; // 0x00: FADDR + __IO uint8_t power; // 0x01: POWER - __IO uint16_t intr_tx; // 0x02: INTR_TX - __IO uint16_t intr_rx; // 0x04: INTR_RX + __IO uint16_t intr_tx; // 0x02: INTR_TX + __IO uint16_t intr_rx; // 0x04: INTR_RX - __IO uint16_t intr_txen; // 0x06: INTR_TXEN - __IO uint16_t intr_rxen; // 0x08: INTR_RXEN + __IO uint16_t intr_txen; // 0x06: INTR_TXEN + __IO uint16_t intr_rxen; // 0x08: INTR_RXEN - __IO uint8_t intrusb; // 0x0A: INTRUSB - __IO uint8_t intrusben; // 0x0B: INTRUSBEN + __IO uint8_t intrusb; // 0x0A: INTRUSB + __IO uint8_t intrusben; // 0x0B: INTRUSBEN - __IO uint16_t frame; // 0x0C: FRAME - __IO uint8_t index; // 0x0E: INDEX - __IO uint8_t testmode; // 0x0F: TESTMODE + __IO uint16_t frame; // 0x0C: FRAME + __IO uint8_t index; // 0x0E: INDEX + __IO uint8_t testmode; // 0x0F: TESTMODE - //------------- Indexed CSR -------------// - musb_ep_csr_t indexed_csr; // 0x10-0x1F: Indexed CSR 0-15 + //------------- CSR (indexed) -------------// + musb_ep_csr_t indexed_csr; // 0x10-0x1F: Indexed CSR 0-15 //------------- FIFOs -------------// - __IO uint32_t fifo[16]; // 0x20-0x5C: FIFO 0-15 + __IO uint32_t fifo[16]; // 0x20-0x5C: FIFO 0-15 // Common (2) - __IO uint8_t devctl; // 0x60: DEVCTL - __IO uint8_t misc; // 0x61: MISC + __IO uint8_t devctl; // 0x60: DEVCTL + __IO uint8_t misc; // 0x61: MISC - //------------- Dynammic FIFO -------------// - __IO uint8_t txfifo_sz; // 0x62: TXFIFO_SZ - __IO uint8_t rxfifo_sz; // 0x63: RXFIFO_SZ - __IO uint16_t txfifo_addr; // 0x64: TXFIFO_ADDR - __IO uint16_t rxfifo_addr; // 0x66: RXFIFO_ADDR + //------------- Dynammic FIFO (indexed) -------------// + __IO uint8_t txfifo_sz; // 0x62: TXFIFO_SZ + __IO uint8_t rxfifo_sz; // 0x63: RXFIFO_SZ + __IO uint16_t txfifo_addr; // 0x64: TXFIFO_ADDR + __IO uint16_t rxfifo_addr; // 0x66: RXFIFO_ADDR //------------- Additional Control/Status -------------// union { - __O uint32_t vcontrol; // 0x68: VCONTROL - __IO uint32_t vstatus; // 0x68: VSTATUS + __O uint32_t vcontrol; // 0x68: VCONTROL + __IO uint32_t vstatus; // 0x68: VSTATUS }; - __IO uint16_t hwvers; // 0x6c: HWVERS - __R uint16_t rsv_0x6e_0x77[5]; - - //------------- Additional Configuration -------------// - __IO uint8_t epinfo; // 0x78: EPINFO - __IO uint8_t raminfo; // 0x79: RAMINFO - __IO uint8_t softreset; // 0x7A: SOFTRESET (Analog), Link info - __IO uint8_t vplen; // 0x7B: VPLEN - __IO uint8_t hs_eof1; // 0x7C: HS_EOF1 - __IO uint8_t fs_eof1; // 0x7D: FS_EOF1 - __IO uint8_t ls_eof1; // 0x7E: LS_EOF1 - __IO uint8_t soft_rst; // 0x7F: SOFT_RST + __IO uint16_t hwvers; // 0x6c: HWVERS + __R uint16_t rsv_0x6e_0x77[5]; // 0x6E-0x77: Reserved + + //------------- Additional Configuration -------------// + __IO uint8_t epinfo; // 0x78: EPINFO + __IO uint8_t raminfo; // 0x79: RAMINFO + __IO uint8_t softreset; // 0x7A: SOFTRESET (Analog), Link info + __IO uint8_t vplen; // 0x7B: VPLEN + __IO uint8_t hs_eof1; // 0x7C: HS_EOF1 + __IO uint8_t fs_eof1; // 0x7D: FS_EOF1 + __IO uint8_t ls_eof1; // 0x7E: LS_EOF1 + __IO uint8_t soft_rst; // 0x7F: SOFT_RST //------------- Extended -------------// - __IO uint16_t ctuch; // 0x80: CTUCH - __IO uint16_t cthsrtn; // 0x82: CTHSRTN - __R uint32_t rsv_0x84_0xff[31]; // 0x84-0xFF: Reserved + __IO uint16_t ctuch; // 0x80: CTUCH + __IO uint16_t cthsrtn; // 0x82: CTHSRTN + __R uint32_t rsv_0x84_0xff[31]; // 0x84-0xFF: Reserved //------------- Absolute CSR (used index to remap to Indexed above) -------------// // TI tm4c can access this directly, but should use indexed_csr for portability - musb_ep_csr_t ep_csr[16]; // 0x100-0x1FF: EP0-15 CSR - - __R uint32_t rsv_0x200_0x3ff[128]; // 0x200-0x3FF: Reserved - - //------------- Analog PHY -------------// - __IO uint32_t mxm_usb_reg_00; // 0x400: MXM_USB_REG_00 - __IO uint32_t m31_phy_utmi_reset; // 0x404: M31_PHY_UTMI_RESET - __IO uint32_t m31_phy_utmi_vcontrol; // 0x408: M31_PHY_UTMI_VCONTROL - __IO uint32_t m31_phy_clk_en; // 0x40C: M31_PHY_CLK_EN - __IO uint32_t m31_phy_ponrst; // 0x410: M31_PHY_PONRST - __IO uint32_t m31_phy_noncry_rstb; // 0x414: M31_PHY_NONCRY_RSTB - __IO uint32_t m31_phy_noncry_en; // 0x418: M31_PHY_NONCRY_EN - __R uint32_t rsv_0x41c; - __IO uint32_t m31_phy_u2_compliance_en; // 0x420: M31_PHY_U2_COMPLIANCE_EN - __IO uint32_t m31_phy_u2_compliance_dac_adj; // 0x424: M31_PHY_U2_COMPLIANCE_DAC_ADJ - __IO uint32_t m31_phy_u2_compliance_dac_adj_en; // 0x428: M31_PHY_U2_COMPLIANCE_DAC_ADJ_EN - __IO uint32_t m31_phy_clk_rdy; // 0x42C: M31_PHY_CLK_RDY - __IO uint32_t m31_phy_pll_en; // 0x430: M31_PHY_PLL_EN - __IO uint32_t m31_phy_bist_ok; // 0x434: M31_PHY_BIST_OK - __IO uint32_t m31_phy_data_oe; // 0x438: M31_PHY_DATA_OE - __IO uint32_t m31_phy_oscouten; // 0x43C: M31_PHY_OSCOUTEN - __IO uint32_t m31_phy_lpm_alive; // 0x440: M31_PHY_LPM_ALIVE - __IO uint32_t m31_phy_hs_bist_mode; // 0x444: M31_PHY_HS_BIST_MODE - __IO uint32_t m31_phy_coreclkin; // 0x448: M31_PHY_CORECLKIN - __IO uint32_t m31_phy_xtlsel; // 0x44C: M31_PHY_XTLSEL - __IO uint32_t m31_phy_ls_en; // 0x450: M31_PHY_LS_EN - __IO uint32_t m31_phy_debug_sel; // 0x454: M31_PHY_DEBUG_SEL - __IO uint32_t m31_phy_debug_out; // 0x458: M31_PHY_DEBUG_OUT - __IO uint32_t m31_phy_outclksel; // 0x45C: M31_PHY_OUTCLKSEL - __IO uint32_t m31_phy_xcfgi_31_0; // 0x460: M31_PHY_XCFGI_31_0 - __IO uint32_t m31_phy_xcfgi_63_32; // 0x464: M31_PHY_XCFGI_63_32 - __IO uint32_t m31_phy_xcfgi_95_64; // 0x468: M31_PHY_XCFGI_95_64 - __IO uint32_t m31_phy_xcfgi_127_96; // 0x46C: M31_PHY_XCFGI_127_96 - __IO uint32_t m31_phy_xcfgi_137_128; // 0x470: M31_PHY_XCFGI_137_128 - __IO uint32_t m31_phy_xcfg_hs_coarse_tune_num; // 0x474: M31_PHY_XCFG_HS_COARSE_TUNE_NUM - __IO uint32_t m31_phy_xcfg_hs_fine_tune_num; // 0x478: M31_PHY_XCFG_HS_FINE_TUNE_NUM - __IO uint32_t m31_phy_xcfg_fs_coarse_tune_num; // 0x47C: M31_PHY_XCFG_FS_COARSE_TUNE_NUM - __IO uint32_t m31_phy_xcfg_fs_fine_tune_num; // 0x480: M31_PHY_XCFG_FS_FINE_TUNE_NUM - __IO uint32_t m31_phy_xcfg_lock_range_max; // 0x484: M31_PHY_XCFG_LOCK_RANGE_MAX - __IO uint32_t m31_phy_xcfgi_lock_range_min; // 0x488: M31_PHY_XCFGI_LOCK_RANGE_MIN - __IO uint32_t m31_phy_xcfg_ob_rsel; // 0x48C: M31_PHY_XCFG_OB_RSEL - __IO uint32_t m31_phy_xcfg_oc_rsel; // 0x490: M31_PHY_XCFG_OC_RSEL - __IO uint32_t m31_phy_xcfgo; // 0x494: M31_PHY_XCFGO - __IO uint32_t mxm_int; // 0x498: MXM_INT - __IO uint32_t mxm_int_en; // 0x49C: MXM_INT_EN - __IO uint32_t mxm_suspend; // 0x4A0: MXM_SUSPEND - __IO uint32_t mxm_reg_a4; // 0x4A4: MXM_REG_A4 + musb_ep_csr_t ep_csr[16]; // 0x100-0x1FF: EP0-15 CSR } musb_regs_t; -TU_VERIFY_STATIC(sizeof(musb_regs_t) == 0x4A8, "size is not correct"); +TU_VERIFY_STATIC(sizeof(musb_regs_t) == 0x200, "size is not correct"); //--------------------------------------------------------------------+ // Helper //--------------------------------------------------------------------+ - TU_ATTR_ALWAYS_INLINE static inline musb_ep_csr_t* get_ep_csr(musb_regs_t* musb_regs, unsigned epnum) { musb_regs->index = epnum; return &musb_regs->indexed_csr; } - //***************************************************************************** // // The following are defines for the bit fields in the USB_O_FADDR register. diff --git a/test/hil/rpi.json b/test/hil/rpi.json index 688ea3822..b7d36c543 100644 --- a/test/hil/rpi.json +++ b/test/hil/rpi.json @@ -50,13 +50,6 @@ "flasher": "openocd", "flasher_sn": "066FFF495087534867063844", "flasher_args": "-f interface/stlink.cfg -f target/stm32g0x.cfg" - }, - { - "name": "nanoch32v203", - "uid": "CDAB277B0FBC03E339E339E3", - "flasher": "openocd_wch", - "flasher_sn": "EBCA8F0670AF", - "flasher_args": "" } ], "boards-skip": [ @@ -68,6 +61,13 @@ "flasher_args": "-device MIMXRT1011xxx5A", "comment": "not running reliably in bulk with other boards, probably power, flashing etc .." }, + { + "name": "nanoch32v203", + "uid": "CDAB277B0FBC03E339E339E3", + "flasher": "openocd_wch", + "flasher_sn": "EBCA8F0670AF", + "flasher_args": "" + }, { "name": "espressif_s3_devkitm", "uid": "84F703C084E4", -- cgit v1.3.1 From e345380723051ac3342a724660e877d7b2dad2fb Mon Sep 17 00:00:00 2001 From: hathach Date: Sun, 18 Aug 2024 17:15:07 +0700 Subject: add flash_openocd_adi() for use with max32 add feather max32666 to the hil pool --- hw/bsp/family_support.cmake | 19 +++++++++++++++++++ hw/bsp/max32650/family.cmake | 2 ++ hw/bsp/max32666/family.cmake | 16 ++-------------- test/hil/hil_test.py | 12 +++++++++++- test/hil/rpi.json | 7 +++++++ 5 files changed, 41 insertions(+), 15 deletions(-) (limited to 'test/hil') diff --git a/hw/bsp/family_support.cmake b/hw/bsp/family_support.cmake index 4a31f6218..1df8a6f53 100644 --- a/hw/bsp/family_support.cmake +++ b/hw/bsp/family_support.cmake @@ -480,6 +480,25 @@ function(family_flash_openocd_wch TARGET) endfunction() +# Add flash openocd adi (Analog Devices) target +# included with msdk or compiled from release branch of https://github.com/analogdevicesinc/openocd +function(family_flash_openocd_adi TARGET) + if (DEFINED $ENV{MAXIM_PATH}) + # use openocd from msdk + set(OPENOCD ENV{MAXIM_PATH}/Tools/OpenOCD/openocd) + set(OPENOCD_OPTION2 "-s ENV{MAXIM_PATH}/Tools/OpenOCD/scripts") + else() + # compiled from source + if (NOT DEFINED OPENOCD_ADI_PATH) + set(OPENOCD_ADI_PATH $ENV{HOME}/app/openocd_adi) + endif () + set(OPENOCD ${OPENOCD_ADI_PATH}/src/openocd) + set(OPENOCD_OPTION2 "-s ${OPENOCD_ADI_PATH}/tcl") + endif () + + family_flash_openocd(${TARGET}) +endfunction() + # Add flash with https://github.com/ch32-rs/wlink function(family_flash_wlink_rs TARGET) if (NOT DEFINED WLINK_RS) diff --git a/hw/bsp/max32650/family.cmake b/hw/bsp/max32650/family.cmake index 8c4f286a2..e05bd7652 100644 --- a/hw/bsp/max32650/family.cmake +++ b/hw/bsp/max32650/family.cmake @@ -14,6 +14,7 @@ set(LD_FILE_Clang ${LD_FILE_GNU}) set(CMAKE_SYSTEM_PROCESSOR cortex-m4 CACHE INTERNAL "System Processor") set(CMAKE_TOOLCHAIN_FILE ${TOP}/examples/build_system/cmake/toolchain/arm_${TOOLCHAIN}.cmake) set(JLINK_DEVICE max32650) +set(OPENOCD_OPTION "-f interface/cmsis-dap.cfg -f target/max32650.cfg") set(FAMILY_MCUS MAX32650 CACHE INTERNAL "") @@ -150,6 +151,7 @@ function(family_configure_example TARGET RTOS) # Add the optional MSDK OpenOCD flashing family_flash_msdk(${TARGET}) + family_flash_openocd_adi(${TARGET}) endfunction() function(family_flash_msdk TARGET) diff --git a/hw/bsp/max32666/family.cmake b/hw/bsp/max32666/family.cmake index 4a3f1a428..fb8c32295 100644 --- a/hw/bsp/max32666/family.cmake +++ b/hw/bsp/max32666/family.cmake @@ -15,6 +15,7 @@ set(LD_FILE_Clang ${LD_FILE_GNU}) set(CMAKE_SYSTEM_PROCESSOR cortex-m4 CACHE INTERNAL "System Processor") set(CMAKE_TOOLCHAIN_FILE ${TOP}/examples/build_system/cmake/toolchain/arm_${TOOLCHAIN}.cmake) set(JLINK_DEVICE max32666) +set(OPENOCD_OPTION "-f interface/cmsis-dap.cfg -f target/max32665.cfg") set(FAMILY_MCUS MAX32666 CACHE INTERNAL "") @@ -142,18 +143,5 @@ function(family_configure_example TARGET RTOS) # Flashing family_flash_jlink(${TARGET}) - family_flash_msdk(${TARGET}) -endfunction() - -# Add flash msdk target -function(family_flash_msdk TARGET) - set(MAXIM_PATH "$ENV{MAXIM_PATH}") - - add_custom_target(${TARGET}-msdk - DEPENDS ${TARGET} - COMMAND ${MAXIM_PATH}/Tools/OpenOCD/openocd -s ${MAXIM_PATH}/Tools/OpenOCD/scripts - -f interface/cmsis-dap.cfg -f target/max32665.cfg - -c "program $ verify; init; reset; exit" - VERBATIM - ) + family_flash_openocd_adi(${TARGET}) endfunction() diff --git a/test/hil/hil_test.py b/test/hil/hil_test.py index 1d5f98e5c..e5900c616 100644 --- a/test/hil/hil_test.py +++ b/test/hil/hil_test.py @@ -173,10 +173,20 @@ echo "Ready for Remote Connections" with open(f_wch, 'w') as file: file.write(cfg_content) - ret = run_cmd(f'openocd_wch -c "adapter serial {board["flasher_sn"]}" -f {f_wch} -c "program {firmware}.elf reset exit"') + ret = run_cmd(f'openocd_wch -c "adapter serial {board["flasher_sn"]}" -f {f_wch} ' + f'-c "program {firmware}.elf reset exit"') return ret +def flash_openocd_adi(board, firmware): + openocd_adi_script_path = f'{os.getenv("HOME")}/app/openocd_adi/tcl' + if not os.path.exists(openocd_adi_script_path): + openocd_adi_script_path = '/home/pi/openocd_adi/tcl' + + ret = run_cmd(f'openocd_adi -c "adapter serial {board["flasher_sn"]}" -s {openocd_adi_script_path} ' + f'{board["flasher_args"]} -c "program {firmware}.elf reset exit"') + return ret + def flash_wlink_rs(board, firmware): # wlink use index for probe selection and lacking usb serial support ret = run_cmd(f'wlink flash {firmware}.elf') diff --git a/test/hil/rpi.json b/test/hil/rpi.json index b7d36c543..a10fa76bd 100644 --- a/test/hil/rpi.json +++ b/test/hil/rpi.json @@ -14,6 +14,13 @@ "flasher_sn": "E6614C311B597D32", "flasher_args": "-f interface/cmsis-dap.cfg -f target/atsame5x.cfg -c \"adapter speed 5000\"" }, + { + "name": "max32666fthr", + "uid": "0C81464124010B20FF0A08CC2C", + "flasher": "openocd_adi", + "flasher_sn": "040917023bffc88100000000000000000000000097969906", + "flasher_args": "-f interface/cmsis-dap.cfg -f target/max32665.cfg" + }, { "name": "lpcxpresso11u37", "uid": "17121919", -- cgit v1.3.1 From 635bdc1fcea1d4d9972d4c9960a32250b0245186 Mon Sep 17 00:00:00 2001 From: hathach Date: Mon, 19 Aug 2024 13:20:16 +0700 Subject: fix ci build --- src/device/dcd.h | 2 +- src/device/usbd.c | 1 - test/hil/rpi.json | 2 +- 3 files changed, 2 insertions(+), 3 deletions(-) (limited to 'test/hil') diff --git a/src/device/dcd.h b/src/device/dcd.h index 66fae0802..d1d4e4897 100644 --- a/src/device/dcd.h +++ b/src/device/dcd.h @@ -181,7 +181,7 @@ bool dcd_edpt_iso_activate(uint8_t rhport, tusb_desc_endpoint_t const * desc_ep) #else // Close an endpoint. -void dcd_edpt_close (uint8_t rhport, uint8_t ep_addr); +void dcd_edpt_close (uint8_t rhport, uint8_t ep_addr) TU_ATTR_WEAK; #endif diff --git a/src/device/usbd.c b/src/device/usbd.c index d6f69fc24..67faf0da7 100644 --- a/src/device/usbd.c +++ b/src/device/usbd.c @@ -1424,7 +1424,6 @@ void usbd_edpt_close(uint8_t rhport, uint8_t ep_addr) { #else rhport = _usbd_rhport; - TU_ASSERT(dcd_edpt_close, /**/); TU_LOG_USBD(" CLOSING Endpoint: 0x%02X\r\n", ep_addr); uint8_t const epnum = tu_edpt_number(ep_addr); diff --git a/test/hil/rpi.json b/test/hil/rpi.json index a10fa76bd..e90e435d8 100644 --- a/test/hil/rpi.json +++ b/test/hil/rpi.json @@ -18,7 +18,7 @@ "name": "max32666fthr", "uid": "0C81464124010B20FF0A08CC2C", "flasher": "openocd_adi", - "flasher_sn": "040917023bffc88100000000000000000000000097969906", + "flasher_sn": "042217023bffc88100000000000000000000000097969906", "flasher_args": "-f interface/cmsis-dap.cfg -f target/max32665.cfg" }, { -- cgit v1.3.1 From 215832397b1593e2df5609f92c9346c133a03774 Mon Sep 17 00:00:00 2001 From: hathach Date: Mon, 19 Aug 2024 19:07:47 +0700 Subject: update doc, re-enable metro m7 for hil, only build make windows/macos on PR --- .github/workflows/build.yml | 5 +- README.rst | 4 +- docs/reference/supported.rst | 277 +++++++++++++++++++++---------------------- test/hil/rpi.json | 15 ++- 4 files changed, 149 insertions(+), 152 deletions(-) (limited to 'test/hil') diff --git a/.github/workflows/build.yml b/.github/workflows/build.yml index fde9400a7..e4204ca3d 100644 --- a/.github/workflows/build.yml +++ b/.github/workflows/build.yml @@ -66,7 +66,7 @@ jobs: build-system: 'cmake' toolchain: ${{ matrix.toolchain }} build-args: ${{ toJSON(fromJSON(needs.set-matrix.outputs.json)[matrix.toolchain].family) }} - one-per-family: ${{ github.event_name != 'pull_request' }} + one-per-family: ${{ github.event_name == 'push' }} # --------------------------------------- # Build CMake arm-gcc @@ -103,12 +103,13 @@ jobs: build-system: 'make' toolchain: ${{ matrix.toolchain }} build-args: ${{ toJSON(fromJSON(needs.set-matrix.outputs.json)[matrix.toolchain].family) }} - one-per-family: ${{ github.event_name != 'pull_request' }} + one-per-family: ${{ github.event_name == 'push' }} # --------------------------------------- # Build Make on Windows/MacOS # --------------------------------------- make-os: + if: github.event_name == 'pull_request' uses: ./.github/workflows/build_util.yml strategy: fail-fast: false diff --git a/README.rst b/README.rst index 422f23271..6dd0e2714 100644 --- a/README.rst +++ b/README.rst @@ -109,7 +109,9 @@ Following CPUs are supported, check out `Supported Devices`_ for comprehensive l +==============+============================================================+ | Allwinner | F1C100s/F1C200s | +--------------+------------------------------------------------------------+ -| Analog | MAX3421E (usb host shield) | +| Analog | max32: 650, 666, 690. max78002 | +| | | +| | max3421e (host) | +--------------+------------------------------------------------------------+ | Brigetek | FT90x | +--------------+------------------------------------------------------------+ diff --git a/docs/reference/supported.rst b/docs/reference/supported.rst index edb6b69ca..2bfa1b8d0 100644 --- a/docs/reference/supported.rst +++ b/docs/reference/supported.rst @@ -5,147 +5,142 @@ Supported Devices Supported MCUs ============== -+--------------+-----------------------+--------+------+-----------+-------------------+--------------+ -| Manufacturer | Family | Device | Host | Highspeed | Driver | Note | -+==============+=======================+========+======+===========+===================+==============+ -| Allwinner | F1C100s/F1C200s | ✔ | | ✔ | sunxi | musb variant | -+--------------+-----------------------+--------+------+-----------+-------------------+--------------+ -| Analog | MAX3421E | | ✔ | ✖ | max3421 | via SPI | -+--------------+-----------------------+--------+------+-----------+-------------------+--------------+ -| Brigetek | FT90x | ✔ | | ✔ | ft9xx | | -+--------------+-----------------------+--------+------+-----------+-------------------+--------------+ -| Broadcom | BCM2711, BCM2837 | ✔ | | ✔ | dwc2 | | -+--------------+-----------------------+--------+------+-----------+-------------------+--------------+ -| Dialog | DA1469x | ✔ | ✖ | ✖ | da146xx | | -+--------------+-----------------------+--------+------+-----------+-------------------+--------------+ -| Espressif | ESP32 S2, S3 | ✔ | | ✖ | dwc2 or esp32sx | | -+--------------+-----------------------+--------+------+-----------+-------------------+--------------+ -| GigaDevice | GD32VF103 | ✔ | | ✖ | dwc2 | | -+--------------+-----------------------+--------+------+-----------+-------------------+--------------+ -| Infineon | XMC4500 | ✔ | | ✖ | dwc2 | | -+--------------+-----+-----------------+--------+------+-----------+-------------------+--------------+ -| MicroChip | SAM | D11, D21 | ✔ | | ✖ | samd | | -| | +-----------------+--------+------+-----------+-------------------+--------------+ -| | | D51, E5x | ✔ | | ✖ | samd | | -| | +-----------------+--------+------+-----------+-------------------+--------------+ -| | | G55 | ✔ | | ✖ | samg | | -| | +-----------------+--------+------+-----------+-------------------+--------------+ -| | | L21, L22 | ✔ | | ✖ | samd | | -| | +-----------------+--------+------+-----------+-------------------+--------------+ -| | | E70,S70,V70,V71 | ✔ | | ✔ | samx7x | | -| +-----+-----------------+--------+------+-----------+-------------------+--------------+ -| | PIC | 24 | ✔ | | | pic | ci_fs variant| -| | +-----------------+--------+------+-----------+-------------------+--------------+ -| | | 32 mm, mk, mx | ✔ | | | pic | ci_fs variant| -| | +-----------------+--------+------+-----------+-------------------+--------------+ -| | | dsPIC33 | ✔ | | | pic | ci_fs variant| -| | +-----------------+--------+------+-----------+-------------------+--------------+ -| | | 32mz | ✔ | | | pic32mz | musb variant | -+--------------+-----+-----------------+--------+------+-----------+-------------------+--------------+ -| Mind Montion | mm32 | ✔ | | ✖ | mm32f327x_otg | ci_fs variant| -+--------------+-----+-----------------+--------+------+-----------+-------------------+--------------+ -| NordicSemi | nRF52833, nRF52840 | ✔ | ✖ | ✖ | nrf5x | | -| +-----------------------+--------+------+-----------+-------------------+--------------+ -| | nRF5340 | ✔ | ✖ | ✖ | nrf5x | | -+--------------+-----------------------+--------+------+-----------+-------------------+--------------+ -| Nuvoton | NUC120 | ✔ | ✖ | ✖ | nuc120 | | -| +-----------------------+--------+------+-----------+-------------------+--------------+ -| | NUC121/NUC125 | ✔ | ✖ | ✖ | nuc121 | | -| +-----------------------+--------+------+-----------+-------------------+--------------+ -| | NUC126 | ✔ | ✖ | ✖ | nuc121 | | -| +-----------------------+--------+------+-----------+-------------------+--------------+ -| | NUC505 | ✔ | | ✔ | nuc505 | | -+--------------+---------+-------------+--------+------+-----------+-------------------+--------------+ -| NXP | iMXRT | RT10xx | ✔ | ✔ | ✔ | ci_hs | | -| | +-------------+--------+------+-----------+-------------------+--------------+ -| | | RT11xx | ✔ | ✔ | ✔ | ci_hs | | -| +---------+-------------+--------+------+-----------+-------------------+--------------+ -| | Kinetis | KL | ✔ | ⚠ | ✖ | ci_fs, khci | | -| | +-------------+--------+------+-----------+-------------------+--------------+ -| | | K32L2 | ✔ | | ✖ | khci | ci_fs variant| -| +---------+-------------+--------+------+-----------+-------------------+--------------+ -| | LPC | 11u, 13, 15 | ✔ | ✖ | ✖ | lpc_ip3511 | | -| | +-------------+--------+------+-----------+-------------------+--------------+ -| | | 17, 40 | ✔ | ⚠ | ✖ | lpc17_40 | | -| | +-------------+--------+------+-----------+-------------------+--------------+ -| | | 18, 43 | ✔ | ✔ | ✔ | ci_hs | | -| | +-------------+--------+------+-----------+-------------------+--------------+ -| | | 51u | ✔ | ✖ | ✖ | lpc_ip3511 | | -| | +-------------+--------+------+-----------+-------------------+--------------+ -| | | 54 | ✔ | | ✔ | lpc_ip3511 | | -| | +-------------+--------+------+-----------+-------------------+--------------+ -| | | 55 | ✔ | | ✔ | lpc_ip3511 | | -| +---------+-------------+--------+------+-----------+-------------------+--------------+ -| | MCX | N9 | ✔ | | ✔ | ci_fs, ci_hs | | -+--------------+---------+-------------+--------+------+-----------+-------------------+--------------+ -| Raspberry Pi | RP2040 | ✔ | ✔ | ✖ | rp2040, pio_usb | | -+--------------+-----+-----------------+--------+------+-----------+-------------------+--------------+ -| Renesas | RX | 63N, 65N, 72N | ✔ | ✔ | ✖ | rusb2 | | -| +-----+-----------------+--------+------+-----------+-------------------+--------------+ -| | RA | 4M1, 4M3, 6M1 | ✔ | ✔ | ✖ | rusb2 | | -| | +-----------------+--------+------+-----------+-------------------+--------------+ -| | | 6M5 | ✔ | ✔ | ✔ | rusb2 | | -+--------------+-----+-----------------+--------+------+-----------+-------------------+--------------+ -| Silabs | EFM32GG12 | ✔ | | ✖ | dwc2 | | -+--------------+-----------------------+--------+------+-----------+-------------------+--------------+ -| Sony | CXD56 | ✔ | ✖ | ✔ | cxd56 | | -+--------------+-----------------------+--------+------+-----------+-------------------+--------------+ -| ST STM32 | F0 | ✔ | ✖ | ✖ | stm32_fsdev | | -| +----+------------------+--------+------+-----------+-------------------+--------------+ -| | F1 | 102, 103 | ✔ | ✖ | ✖ | stm32_fsdev | | -| | +------------------+--------+------+-----------+-------------------+--------------+ -| | | 105, 107 | ✔ | | ✖ | dwc2 | | -| +----+------------------+--------+------+-----------+-------------------+--------------+ -| | F2 | ✔ | | ✔ | dwc2 | | -| +-----------------------+--------+------+-----------+-------------------+--------------+ -| | F3 | ✔ | ✖ | ✖ | stm32_fsdev | | -| +-----------------------+--------+------+-----------+-------------------+--------------+ -| | F4 | ✔ | | ✔ | dwc2 | | -| +-----------------------+--------+------+-----------+-------------------+--------------+ -| | F7 | ✔ | | ✔ | dwc2 | | -| +-----------------------+--------+------+-----------+-------------------+--------------+ -| | G0 | ✔ | | ✖ | stm32_fsdev | | -| +-----------------------+--------+------+-----------+-------------------+--------------+ -| | G4 | ✔ | ✖ | ✖ | stm32_fsdev | | -| +-----------------------+--------+------+-----------+-------------------+--------------+ -| | H5 | ✔ | | ✖ | stm32_fsdev | | -| +-----------------------+--------+------+-----------+-------------------+--------------+ -| | H7 | ✔ | | ✔ | dwc2 | | -| +-----------------------+--------+------+-----------+-------------------+--------------+ -| | L0 | ✔ | ✖ | ✖ | stm32_fsdev | | -| +-----------------------+--------+------+-----------+-------------------+--------------+ -| | L1 | ✔ | ✖ | ✖ | stm32_fsdev | | -| +----+------------------+--------+------+-----------+-------------------+--------------+ -| | L4 | 4x2, 4x3 | ✔ | ✖ | ✖ | stm32_fsdev | | -| | +------------------+--------+------+-----------+-------------------+--------------+ -| | | 4x5, 4x6 | ✔ | | ✖ | dwc2 | | -| +----+------------------+--------+------+-----------+-------------------+--------------+ -| | L4+ | ✔ | | ✖ | dwc2 | | -| +-----------------------+--------+------+-----------+-------------------+--------------+ -| | L5 | ✔ | ✖ | ✖ | stm32_fsdev | | -| +----+------------------+--------+------+-----------+-------------------+--------------+ -| | U5 | 535, 545 | ✔ | | ✖ | stm32_fsdev | | -| | +------------------+--------+------+-----------+-------------------+--------------+ -| | | 575, 585 | ✔ | | ✖ | dwc2 | | -| | +------------------+--------+------+-----------+-------------------+--------------+ -| | | 59x,5Ax,5Fx,5Gx | ✔ | | ✔ | dwc2 | | -| +----+------------------+--------+------+-----------+-------------------+--------------+ -| | WBx5 | ✔ | ✖ | ✖ | stm32_fsdev | | -+--------------+-----------------------+--------+------+-----------+-------------------+--------------+ -| TI | MSP430 | ✔ | ✖ | ✖ | msp430x5xx | | -| +-----------------------+--------+------+-----------+-------------------+--------------+ -| | MSP432E4 | ✔ | | ✖ | musb | | -| +-----------------------+--------+------+-----------+-------------------+--------------+ -| | TM4C123 | ✔ | | ✖ | musb | | -+--------------+-----------------------+--------+------+-----------+-------------------+--------------+ -| ValentyUSB | eptri | ✔ | ✖ | ✖ | eptri | | -+--------------+-----------------------+--------+------+-----------+-------------------+--------------+ -| WCH | CH32F20x | ✔ | | ✔ | ch32f205 | | -| +-----------------------+--------+------+-----------+-------------------+--------------+ -| | CH32V20x | ✔ | | ✖ | ch32v20x | | -| +-----------------------+--------+------+-----------+-------------------+--------------+ -| | CH32V307 | ✔ | | ✔ | ch32v307 | | -+--------------+-----------------------+--------+------+-----------+-------------------+--------------+ ++--------------+-----------------------------+--------+------+-----------+-------------------+-------------------+ +| Manufacturer | Family | Device | Host | Highspeed | Driver | Note | ++==============+=============================+========+======+===========+===================+===================+ +| Allwinner | F1C100s/F1C200s | ✔ | | ✔ | sunxi | musb variant | ++--------------+-----------------------------+--------+------+-----------+-------------------+-------------------+ +| Analog | MAX3421E | | ✔ | ✖ | max3421 | via SPI | +| +-----------------------------+--------+------+-----------+-------------------+-------------------+ +| | MAX32 650, 666, 690, | ✔ | | ✔ | musb | 1-dir ep | +| | MAX78002 | | | | | | ++--------------+-----------------------------+--------+------+-----------+-------------------+-------------------+ +| Brigetek | FT90x | ✔ | | ✔ | ft9xx | 1-dir ep | ++--------------+-----------------------------+--------+------+-----------+-------------------+-------------------+ +| Broadcom | BCM2711, BCM2837 | ✔ | | ✔ | dwc2 | | ++--------------+-----------------------------+--------+------+-----------+-------------------+-------------------+ +| Dialog | DA1469x | ✔ | ✖ | ✖ | da146xx | | ++--------------+-----------------------------+--------+------+-----------+-------------------+-------------------+ +| Espressif | ESP32 S2, S3 | ✔ | | ✖ | dwc2 or esp32sx | | ++--------------+-----------------------------+--------+------+-----------+-------------------+-------------------+ +| GigaDevice | GD32VF103 | ✔ | | ✖ | dwc2 | | ++--------------+-----------------------------+--------+------+-----------+-------------------+-------------------+ +| Infineon | XMC4500 | ✔ | | ✖ | dwc2 | | ++--------------+-----+-----------------------+--------+------+-----------+-------------------+-------------------+ +| MicroChip | SAM | D11, D21, L21, L22 | ✔ | | ✖ | samd | | +| | +-----------------------+--------+------+-----------+-------------------+-------------------+ +| | | D51, E5x | ✔ | | ✖ | samd | | +| | +-----------------------+--------+------+-----------+-------------------+-------------------+ +| | | G55 | ✔ | | ✖ | samg | 1-dir ep | +| | +-----------------------+--------+------+-----------+-------------------+-------------------+ +| | | E70,S70,V70,V71 | ✔ | | ✔ | samx7x | 1-dir ep | +| +-----+-----------------------+--------+------+-----------+-------------------+-------------------+ +| | PIC | 24 | ✔ | | | pic | ci_fs variant | +| | +-----------------------+--------+------+-----------+-------------------+-------------------+ +| | | 32 mm, mk, mx | ✔ | | | pic | ci_fs variant | +| | +-----------------------+--------+------+-----------+-------------------+-------------------+ +| | | dsPIC33 | ✔ | | | pic | ci_fs variant | +| | +-----------------------+--------+------+-----------+-------------------+-------------------+ +| | | 32mz | ✔ | | | pic32mz | musb variant | ++--------------+-----+-----------------------+--------+------+-----------+-------------------+-------------------+ +| Mind Montion | mm32 | ✔ | | ✖ | mm32f327x_otg | ci_fs variant | ++--------------+-----+-----------------------+--------+------+-----------+-------------------+-------------------+ +| NordicSemi | nRF 52833, 52840, 5340 | ✔ | ✖ | ✖ | nrf5x | only ep8 is ISO | ++--------------+-----------------------------+--------+------+-----------+-------------------+-------------------+ +| Nuvoton | NUC120 | ✔ | ✖ | ✖ | nuc120 | | +| +-----------------------------+--------+------+-----------+-------------------+-------------------+ +| | NUC121/NUC125 | ✔ | ✖ | ✖ | nuc121 | | +| +-----------------------------+--------+------+-----------+-------------------+-------------------+ +| | NUC126 | ✔ | ✖ | ✖ | nuc121 | | +| +-----------------------------+--------+------+-----------+-------------------+-------------------+ +| | NUC505 | ✔ | | ✔ | nuc505 | | ++--------------+---------+-------------------+--------+------+-----------+-------------------+-------------------+ +| NXP | iMXRT | RT 10xx, 11xx | ✔ | ✔ | ✔ | ci_hs | | +| +---------+-------------------+--------+------+-----------+-------------------+-------------------+ +| | Kinetis | KL | ✔ | ⚠ | ✖ | ci_fs, khci | | +| | +-------------------+--------+------+-----------+-------------------+-------------------+ +| | | K32L2 | ✔ | | ✖ | khci | ci_fs variant | +| +---------+-------------------+--------+------+-----------+-------------------+-------------------+ +| | LPC | 11u, 13, 15 | ✔ | ✖ | ✖ | lpc_ip3511 | | +| | +-------------------+--------+------+-----------+-------------------+-------------------+ +| | | 17, 40 | ✔ | ⚠ | ✖ | lpc17_40 | | +| | +-------------------+--------+------+-----------+-------------------+-------------------+ +| | | 18, 43 | ✔ | ✔ | ✔ | ci_hs | | +| | +-------------------+--------+------+-----------+-------------------+-------------------+ +| | | 51u | ✔ | ✖ | ✖ | lpc_ip3511 | | +| | +-------------------+--------+------+-----------+-------------------+-------------------+ +| | | 54, 55 | ✔ | | ✔ | lpc_ip3511 | | +| +---------+-------------------+--------+------+-----------+-------------------+-------------------+ +| | MCX | N9 | ✔ | | ✔ | ci_fs, ci_hs | | ++--------------+---------+-------------------+--------+------+-----------+-------------------+-------------------+ +| Raspberry Pi | RP2040, RP2350 | ✔ | ✔ | ✖ | rp2040, pio_usb | | ++--------------+-----+-----------------------+--------+------+-----------+-------------------+-------------------+ +| Renesas | RX | 63N, 65N, 72N | ✔ | ✔ | ✖ | rusb2 | | +| +-----+-----------------------+--------+------+-----------+-------------------+-------------------+ +| | RA | 4M1, 4M3, 6M1 | ✔ | ✔ | ✖ | rusb2 | | +| | +-----------------------+--------+------+-----------+-------------------+-------------------+ +| | | 6M5 | ✔ | ✔ | ✔ | rusb2 | | ++--------------+-----+-----------------------+--------+------+-----------+-------------------+-------------------+ +| Silabs | EFM32GG12 | ✔ | | ✖ | dwc2 | | ++--------------+-----------------------------+--------+------+-----------+-------------------+-------------------+ +| Sony | CXD56 | ✔ | ✖ | ✔ | cxd56 | | ++--------------+-----------------------------+--------+------+-----------+-------------------+-------------------+ +| ST STM32 | F0 | ✔ | ✖ | ✖ | stm32_fsdev | | +| +----+------------------------+--------+------+-----------+-------------------+-------------------+ +| | F1 | 102, 103 | ✔ | ✖ | ✖ | stm32_fsdev | | +| | +------------------------+--------+------+-----------+-------------------+-------------------+ +| | | 105, 107 | ✔ | | ✖ | dwc2 | | +| +----+------------------------+--------+------+-----------+-------------------+-------------------+ +| | F2 | ✔ | | ✔ | dwc2 | | +| +-----------------------------+--------+------+-----------+-------------------+-------------------+ +| | F3 | ✔ | ✖ | ✖ | stm32_fsdev | | +| +-----------------------------+--------+------+-----------+-------------------+-------------------+ +| | F4 | ✔ | | ✔ | dwc2 | | +| +-----------------------------+--------+------+-----------+-------------------+-------------------+ +| | F7 | ✔ | | ✔ | dwc2 | | +| +-----------------------------+--------+------+-----------+-------------------+-------------------+ +| | G0 | ✔ | | ✖ | stm32_fsdev | | +| +-----------------------------+--------+------+-----------+-------------------+-------------------+ +| | G4 | ✔ | ✖ | ✖ | stm32_fsdev | | +| +-----------------------------+--------+------+-----------+-------------------+-------------------+ +| | H5 | ✔ | | ✖ | stm32_fsdev | | +| +-----------------------------+--------+------+-----------+-------------------+-------------------+ +| | H7 | ✔ | | ✔ | dwc2 | | +| +-----------------------------+--------+------+-----------+-------------------+-------------------+ +| | L0 | ✔ | ✖ | ✖ | stm32_fsdev | | +| +-----------------------------+--------+------+-----------+-------------------+-------------------+ +| | L1 | ✔ | ✖ | ✖ | stm32_fsdev | | +| +----+------------------------+--------+------+-----------+-------------------+-------------------+ +| | L4 | 4x2, 4x3 | ✔ | ✖ | ✖ | stm32_fsdev | | +| | +------------------------+--------+------+-----------+-------------------+-------------------+ +| | | 4x5, 4x6 | ✔ | | ✖ | dwc2 | | +| +----+------------------------+--------+------+-----------+-------------------+-------------------+ +| | L4+ | ✔ | | ✖ | dwc2 | | +| +-----------------------------+--------+------+-----------+-------------------+-------------------+ +| | L5 | ✔ | ✖ | ✖ | stm32_fsdev | | +| +----+------------------------+--------+------+-----------+-------------------+-------------------+ +| | U5 | 535, 545 | ✔ | | ✖ | stm32_fsdev | | +| | +------------------------+--------+------+-----------+-------------------+-------------------+ +| | | 575, 585 | ✔ | | ✖ | dwc2 | | +| | +------------------------+--------+------+-----------+-------------------+-------------------+ +| | | 59x,5Ax,5Fx,5Gx | ✔ | | ✔ | dwc2 | | +| +----+------------------------+--------+------+-----------+-------------------+-------------------+ +| | WBx5 | ✔ | ✖ | ✖ | stm32_fsdev | | ++--------------+-----------------------------+--------+------+-----------+-------------------+-------------------+ +| TI | MSP430 | ✔ | ✖ | ✖ | msp430x5xx | | +| +-----------------------------+--------+------+-----------+-------------------+-------------------+ +| | MSP432E4 | ✔ | | ✖ | musb | | +| +-----------------------------+--------+------+-----------+-------------------+-------------------+ +| | TM4C123 | ✔ | | ✖ | musb | | ++--------------+-----------------------------+--------+------+-----------+-------------------+-------------------+ +| ValentyUSB | eptri | ✔ | ✖ | ✖ | eptri | | ++--------------+-----------------------------+--------+------+-----------+-------------------+-------------------+ +| WCH | CH32F20x | ✔ | | ✔ | ch32f205 | | +| +-----------------------------+--------+------+-----------+-------------------+-------------------+ +| | CH32V20x | ✔ | | ✖ | ch32v20x | | +| +-----------------------------+--------+------+-----------+-------------------+-------------------+ +| | CH32V307 | ✔ | | ✔ | ch32v307 | | ++--------------+-----------------------------+--------+------+-----------+-------------------+-------------------+ Table Legend diff --git a/test/hil/rpi.json b/test/hil/rpi.json index e90e435d8..b87b80300 100644 --- a/test/hil/rpi.json +++ b/test/hil/rpi.json @@ -14,6 +14,13 @@ "flasher_sn": "E6614C311B597D32", "flasher_args": "-f interface/cmsis-dap.cfg -f target/atsame5x.cfg -c \"adapter speed 5000\"" }, + { + "name": "metro_m7_1011", + "uid": "9CE8715DD71137363E00005002004200", + "flasher": "jlink", + "flasher_sn": "000611000000", + "flasher_args": "-device MIMXRT1011xxx5A" + }, { "name": "max32666fthr", "uid": "0C81464124010B20FF0A08CC2C", @@ -60,14 +67,6 @@ } ], "boards-skip": [ - { - "name": "metro_m7_1011", - "uid": "9CE8715DD71137363E00005002004200", - "flasher": "jlink", - "flasher_sn": "000611000000", - "flasher_args": "-device MIMXRT1011xxx5A", - "comment": "not running reliably in bulk with other boards, probably power, flashing etc .." - }, { "name": "nanoch32v203", "uid": "CDAB277B0FBC03E339E339E3", -- cgit v1.3.1 From 0541598d07fd57e4ad0067abe85c4c7a71b3756a Mon Sep 17 00:00:00 2001 From: hathach Date: Mon, 19 Aug 2024 20:09:32 +0700 Subject: mimxrt1015_evk does not work reliably in hil pool (like metro m7). --- test/hil/hil_test.py | 6 +++--- test/hil/rpi.json | 14 +++++++------- 2 files changed, 10 insertions(+), 10 deletions(-) (limited to 'test/hil') diff --git a/test/hil/hil_test.py b/test/hil/hil_test.py index e5900c616..09c30bf52 100644 --- a/test/hil/hil_test.py +++ b/test/hil/hil_test.py @@ -436,11 +436,11 @@ def main(): else: config_boards = [e for e in config['boards'] if e['name'] in boards] - err_count_list = 0 + err_count_list = [] with Pool(processes=os.cpu_count()) as pool: err_count_list = pool.map(test_board, config_boards) - - sys.exit(sum(err_count_list)) + err_count = sum(err_count_list) + sys.exit(err_count) if __name__ == '__main__': diff --git a/test/hil/rpi.json b/test/hil/rpi.json index b87b80300..49d2d8286 100644 --- a/test/hil/rpi.json +++ b/test/hil/rpi.json @@ -14,13 +14,6 @@ "flasher_sn": "E6614C311B597D32", "flasher_args": "-f interface/cmsis-dap.cfg -f target/atsame5x.cfg -c \"adapter speed 5000\"" }, - { - "name": "metro_m7_1011", - "uid": "9CE8715DD71137363E00005002004200", - "flasher": "jlink", - "flasher_sn": "000611000000", - "flasher_args": "-device MIMXRT1011xxx5A" - }, { "name": "max32666fthr", "uid": "0C81464124010B20FF0A08CC2C", @@ -67,6 +60,13 @@ } ], "boards-skip": [ + { + "name": "mimxrt1015_evk", + "uid": "DC28F865D2111D228D00B0543A70463C", + "flasher": "jlink", + "flasher_sn": "000726284213", + "flasher_args": "-device MIMXRT1015DAF5A" + }, { "name": "nanoch32v203", "uid": "CDAB277B0FBC03E339E339E3", -- cgit v1.3.1 From 858ad66c9316250876dad533e47513b7def915d1 Mon Sep 17 00:00:00 2001 From: Ha Thach Date: Thu, 22 Aug 2024 12:37:11 +0700 Subject: circleci tweaks (#2770) * skip circleci build on master push * change max32666 probe to jlink, max32625pico is not reliable enough --- .circleci/config.yml | 4 ++++ .circleci/config2.yml | 8 +------- hw/bsp/max32690/family.cmake | 15 +-------------- test/hil/rpi.json | 13 ++++++++++--- 4 files changed, 16 insertions(+), 24 deletions(-) (limited to 'test/hil') diff --git a/.circleci/config.yml b/.circleci/config.yml index 8769926b1..5136d6331 100644 --- a/.circleci/config.yml +++ b/.circleci/config.yml @@ -71,5 +71,9 @@ jobs: workflows: set-matrix: + # Only build PR here, Push will be built by github action. + when: + and: + - not: << pipeline.git.branch.is_default >> jobs: - set-matrix diff --git a/.circleci/config2.yml b/.circleci/config2.yml index cd844c33f..70b5c60ac 100644 --- a/.circleci/config2.yml +++ b/.circleci/config2.yml @@ -100,12 +100,6 @@ commands: if [ << parameters.toolchain >> == esp-idf ]; then docker run --rm -v $PWD:/project -w /project espressif/idf:v5.1.1 python tools/build.py << parameters.family >> else - # Only build one board per family for non PRs i.e commit to master - ONE_PER_FAMILY="" - if [ -z "$CIRCLE_PULL_REQUEST" ]; then - ONE_PER_FAMILY="--one-per-family" - fi - # Toolchain option default is gcc if [ << parameters.toolchain >> == arm-clang ]; then TOOLCHAIN_OPTION="--toolchain clang" @@ -113,7 +107,7 @@ commands: TOOLCHAIN_OPTION="--toolchain gcc" fi - python tools/build.py $ONE_PER_FAMILY -s << parameters.build-system >> $TOOLCHAIN_OPTION << parameters.family >> + python tools/build.py -s << parameters.build-system >> $TOOLCHAIN_OPTION << parameters.family >> fi jobs: diff --git a/hw/bsp/max32690/family.cmake b/hw/bsp/max32690/family.cmake index 736ca8eac..96dcfedff 100644 --- a/hw/bsp/max32690/family.cmake +++ b/hw/bsp/max32690/family.cmake @@ -148,18 +148,5 @@ function(family_configure_example TARGET RTOS) # Flashing family_flash_jlink(${TARGET}) - family_flash_msdk(${TARGET}) -endfunction() - -# Add flash msdk target -function(family_flash_msdk TARGET) - set(MAXIM_PATH "$ENV{MAXIM_PATH}") - - add_custom_target(${TARGET}-msdk - DEPENDS ${TARGET} - COMMAND ${MAXIM_PATH}/Tools/OpenOCD/openocd -s ${MAXIM_PATH}/Tools/OpenOCD/scripts - -f interface/cmsis-dap.cfg -f target/max32690.cfg - -c "program $ verify; init; reset; exit" - VERBATIM - ) + family_flash_openocd_adi(${TARGET}) endfunction() diff --git a/test/hil/rpi.json b/test/hil/rpi.json index 49d2d8286..8eaca2621 100644 --- a/test/hil/rpi.json +++ b/test/hil/rpi.json @@ -17,9 +17,9 @@ { "name": "max32666fthr", "uid": "0C81464124010B20FF0A08CC2C", - "flasher": "openocd_adi", - "flasher_sn": "042217023bffc88100000000000000000000000097969906", - "flasher_args": "-f interface/cmsis-dap.cfg -f target/max32665.cfg" + "flasher": "jlink", + "flasher_sn": "000801011822", + "flasher_args": "-device max32666" }, { "name": "lpcxpresso11u37", @@ -83,6 +83,13 @@ "flasher": "esptool", "flasher_sn": "3ea619acd1cdeb11a0a0b806e93fd3f1", "flasher_args": "-b 921600" + }, + { + "name": "max32666fthr", + "uid": "0C81464124010B20FF0A08CC2C", + "flasher": "openocd_adi", + "flasher_sn": "042217023bffc88100000000000000000000000097969906", + "flasher_args": "-f interface/cmsis-dap.cfg -f target/max32665.cfg" } ] } -- cgit v1.3.1 From 0db42aac71a6fb2a821a034ee29d2587638d309a Mon Sep 17 00:00:00 2001 From: hathach Date: Thu, 22 Aug 2024 18:06:48 +0700 Subject: add hil support for dual host_info_to_cdc replace itsybitsy m4 by metro m4 + max3421e --- examples/dual/host_info_to_device_cdc/src/main.c | 26 ++++--- .../samd5x_e5x/boards/metro_m4_express/board.cmake | 3 + test/hil/hil_test.py | 89 ++++++++++++++-------- test/hil/rpi.json | 25 ++++-- 4 files changed, 95 insertions(+), 48 deletions(-) (limited to 'test/hil') diff --git a/examples/dual/host_info_to_device_cdc/src/main.c b/examples/dual/host_info_to_device_cdc/src/main.c index 5be531098..443cc4674 100644 --- a/examples/dual/host_info_to_device_cdc/src/main.c +++ b/examples/dual/host_info_to_device_cdc/src/main.c @@ -24,7 +24,7 @@ */ /* Host example will get device descriptors of attached devices and print it out via device cdc as follows: - * Device 1: ID 046d:c52f + * Device 1: ID 046d:c52f SN 11223344 Device Descriptor: bLength 18 bDescriptorType 1 @@ -147,7 +147,21 @@ void print_device_info(uint8_t daddr) { return; } - cdc_printf("Device %u: ID %04x:%04x\r\n", daddr, desc_device.idVendor, desc_device.idProduct); + // Get String descriptor using Sync API + uint16_t serial[64]; + uint16_t buf[128]; + + cdc_printf("Device %u: ID %04x:%04x SN ", daddr, desc_device.idVendor, desc_device.idProduct); + xfer_result = tuh_descriptor_get_serial_string_sync(daddr, LANGUAGE_ID, serial, sizeof(serial)); + if (XFER_RESULT_SUCCESS != xfer_result) { + serial[0] = 'n'; + serial[1] = '/'; + serial[2] = 'a'; + serial[3] = 0; + } + print_utf16(serial, TU_ARRAY_SIZE(serial)); + tud_cdc_write_str("\r\n"); + cdc_printf("Device Descriptor:\r\n"); cdc_printf(" bLength %u\r\n" , desc_device.bLength); cdc_printf(" bDescriptorType %u\r\n" , desc_device.bDescriptorType); @@ -160,9 +174,6 @@ void print_device_info(uint8_t daddr) { cdc_printf(" idProduct 0x%04x\r\n" , desc_device.idProduct); cdc_printf(" bcdDevice %04x\r\n" , desc_device.bcdDevice); - // Get String descriptor using Sync API - uint16_t buf[128]; - cdc_printf(" iManufacturer %u " , desc_device.iManufacturer); xfer_result = tuh_descriptor_get_manufacturer_string_sync(daddr, LANGUAGE_ID, buf, sizeof(buf)); if (XFER_RESULT_SUCCESS == xfer_result ) { @@ -178,10 +189,7 @@ void print_device_info(uint8_t daddr) { tud_cdc_write_str("\r\n"); cdc_printf(" iSerialNumber %u " , desc_device.iSerialNumber); - xfer_result = tuh_descriptor_get_serial_string_sync(daddr, LANGUAGE_ID, buf, sizeof(buf)); - if (XFER_RESULT_SUCCESS == xfer_result) { - print_utf16(buf, TU_ARRAY_SIZE(buf)); - } + tud_cdc_write_str((char*)serial); // serial is already to UTF-8 tud_cdc_write_str("\r\n"); cdc_printf(" bNumConfigurations %u\r\n" , desc_device.bNumConfigurations); diff --git a/hw/bsp/samd5x_e5x/boards/metro_m4_express/board.cmake b/hw/bsp/samd5x_e5x/boards/metro_m4_express/board.cmake index 86d12ca24..ebc32b1f7 100644 --- a/hw/bsp/samd5x_e5x/boards/metro_m4_express/board.cmake +++ b/hw/bsp/samd5x_e5x/boards/metro_m4_express/board.cmake @@ -3,6 +3,9 @@ set(SAM_FAMILY samd51) set(JLINK_DEVICE ATSAMD51J19) set(LD_FILE_GNU ${CMAKE_CURRENT_LIST_DIR}/${BOARD}.ld) +# force max3421e for testing with hardware-in-the-loop +set(MAX3421_HOST 1) + function(update_board TARGET) target_compile_definitions(${TARGET} PUBLIC __SAMD51J19A__ diff --git a/test/hil/hil_test.py b/test/hil/hil_test.py index 09c30bf52..5a4799cfb 100644 --- a/test/hil/hil_test.py +++ b/test/hil/hil_test.py @@ -27,6 +27,7 @@ import argparse import os +import re import sys import time import serial @@ -212,14 +213,39 @@ def flash_uniflash(board, firmware): # ------------------------------------------------------------- -# Tests +# Tests: dual # ------------------------------------------------------------- -def test_board_test(board): + +def test_dual_host_info_to_device_cdc(board): + uid = board['uid'] + declared_devs = [f'{d["vid_pid"]}_{d["serial"]}' for d in board['tests']['dual_attached']] + + port = get_serial_dev(uid, 'TinyUSB', "TinyUSB_Device", 0) + ser = open_serial_dev(port) + # read from cdc, first line should contain vid/pid and serial + data = ser.read(1000) + lines = data.decode('utf-8').splitlines() + enum_dev_sn = [] + for l in lines: + vid_pid_sn = re.search(r'ID ([0-9a-fA-F]+):([0-9a-fA-F]+) SN (\w+)', l) + if vid_pid_sn: + print(f'\r\n {l} ', end='') + enum_dev_sn.append(f'{vid_pid_sn.group(1)}_{vid_pid_sn.group(2)}_{vid_pid_sn.group(3)}') + + assert(set(declared_devs) == set(enum_dev_sn)), \ + f'Enumerated devices {enum_dev_sn} not match with declared {declared_devs}' + return 0 + + +# ------------------------------------------------------------- +# Tests: device +# ------------------------------------------------------------- +def test_device_board_test(board): # Dummy test pass -def test_cdc_dual_ports(board): +def test_device_cdc_dual_ports(board): uid = board['uid'] port1 = get_serial_dev(uid, 'TinyUSB', "TinyUSB_Device", 0) port2 = get_serial_dev(uid, 'TinyUSB', "TinyUSB_Device", 2) @@ -241,7 +267,7 @@ def test_cdc_dual_ports(board): assert ser2.read(100) == str2.upper(), 'Port2 wrong data' -def test_cdc_msc(board): +def test_device_cdc_msc(board): uid = board['uid'] # Echo test port = get_serial_dev(uid, 'TinyUSB', "TinyUSB_Device", 0) @@ -262,11 +288,11 @@ issue at github.com/hathach/tinyusb" assert data == readme, 'MSC wrong data' -def test_cdc_msc_freertos(board): - test_cdc_msc(board) +def test_device_cdc_msc_freertos(board): + test_device_cdc_msc(board) -def test_dfu(board): +def test_device_dfu(board): uid = board['uid'] # Wait device enum @@ -308,7 +334,7 @@ def test_dfu(board): os.remove(f_dfu1) -def test_dfu_runtime(board): +def test_device_dfu_runtime(board): uid = board['uid'] # Wait device enum @@ -325,7 +351,7 @@ def test_dfu_runtime(board): assert timeout, 'Device not available' -def test_hid_boot_interface(board): +def test_device_hid_boot_interface(board): uid = board['uid'] kbd = get_hid_dev(uid, 'TinyUSB', 'TinyUSB_Device', 'event-kbd') mouse1 = get_hid_dev(uid, 'TinyUSB', 'TinyUSB_Device', 'if01-event-mouse') @@ -341,7 +367,7 @@ def test_hid_boot_interface(board): assert timeout, 'HID device not available' -def test_hid_composite_freertos(id): +def test_device_hid_composite_freertos(id): # TODO implement later pass @@ -351,13 +377,15 @@ def test_hid_composite_freertos(id): # ------------------------------------------------------------- # all possible tests: board_test is added last to disable board's usb all_tests = [ - 'cdc_dual_ports', - 'cdc_msc', - 'dfu', - 'cdc_msc_freertos', # dont test 2 cdc_msc next to each other, since they have same vid/pid. Can be confused by host - 'dfu_runtime', - 'hid_boot_interface', - 'board_test' + 'device/cdc_dual_ports', + 'device/cdc_msc', + 'device/dfu', + 'device/cdc_msc_freertos', # don't test 2 cdc_msc next to each other + 'device/dfu_runtime', + 'device/hid_boot_interface', + + 'dual/host_info_to_device_cdc', + 'device/board_test' ] @@ -366,23 +394,23 @@ def test_board(board): flasher = board['flasher'].lower() # default to all tests - if 'tests' in board: - test_list = board['tests'] + ['board_test'] - else: - test_list = list(all_tests) + test_list = list(all_tests) - # remove skip_tests - if 'tests_skip' in board: - for skip in board['tests_skip']: - if skip in test_list: - test_list.remove(skip) + if 'tests' in board: + board_tests = board['tests'] + if 'only' in board_tests: + test_list = board_tests['only'] + ['device/board_test'] + if 'skip' in board_tests: + for skip in board_tests['skip']: + if skip in test_list: + test_list.remove(skip) err_count = 0 for test in test_list: - fw_dir = f'cmake-build/cmake-build-{name}/device/{test}' + fw_dir = f'cmake-build/cmake-build-{name}/{test}' if not os.path.exists(fw_dir): - fw_dir = f'examples/cmake-build-{name}/device/{test}' - fw_name = f'{fw_dir}/{test}' + fw_dir = f'examples/cmake-build-{name}/{test}' + fw_name = f'{fw_dir}/{os.path.basename(test)}' print(f'{name:30} {test:20} ... ', end='') if not os.path.exists(fw_dir): @@ -400,7 +428,7 @@ def test_board(board): if ret.returncode == 0: try: - ret = globals()[f'test_{test}'](board) + ret = globals()[f'test_{test.replace("/", "_")}'](board) print('OK') except Exception as e: err_count += 1 @@ -409,7 +437,6 @@ def test_board(board): else: err_count += 1 print('Flash failed') - return err_count diff --git a/test/hil/rpi.json b/test/hil/rpi.json index 8eaca2621..3f07a8f42 100644 --- a/test/hil/rpi.json +++ b/test/hil/rpi.json @@ -8,11 +8,18 @@ "flasher_args": "-device nrf52840_xxaa" }, { - "name": "itsybitsy_m4", - "uid": "D784B28C5338533335202020FF044726", + "name": "metro_m4_express", + "uid": "9995AD485337433231202020FF100A34", "flasher": "openocd", - "flasher_sn": "E6614C311B597D32", - "flasher_args": "-f interface/cmsis-dap.cfg -f target/atsame5x.cfg -c \"adapter speed 5000\"" + "flasher_sn": "E6633861A3978538", + "flasher_args": "-f interface/cmsis-dap.cfg -f target/atsame5x.cfg", + "tests": { + "dual_attached": [ + { + "vid_pid": "1a86_55d4", "serial": "52D2002130" + } + ] + } }, { "name": "max32666fthr", @@ -31,7 +38,9 @@ { "name": "ra4m1_ek", "uid": "152E163038303131393346E46F26574B", - "tests_skip": ["cdc_msc", "cdc_msc_freertos"], + "tests": { + "skip": ["device/cdc_msc", "device/cdc_msc_freertos"] + }, "comment": "MSC is slow to enumerated #2602", "flasher": "jlink", "flasher_sn": "000831174392", @@ -77,9 +86,9 @@ { "name": "espressif_s3_devkitm", "uid": "84F703C084E4", - "tests": [ - "cdc_msc_freertos", "hid_composite_freertos" - ], + "tests": { + "only": ["device/cdc_msc_freertos", "device/hid_composite_freertos"] + }, "flasher": "esptool", "flasher_sn": "3ea619acd1cdeb11a0a0b806e93fd3f1", "flasher_args": "-b 921600" -- cgit v1.3.1 From ccf886ca80ed74d985483fdb90e67703ebeb7dad Mon Sep 17 00:00:00 2001 From: hathach Date: Thu, 22 Aug 2024 18:51:32 +0700 Subject: add pio-usb host test to hil. fix build as well --- hw/bsp/rp2040/family.c | 4 ++-- test/hil/rpi.json | 11 +++++------ 2 files changed, 7 insertions(+), 8 deletions(-) (limited to 'test/hil') diff --git a/hw/bsp/rp2040/family.c b/hw/bsp/rp2040/family.c index 250989ce9..64a3a0af6 100644 --- a/hw/bsp/rp2040/family.c +++ b/hw/bsp/rp2040/family.c @@ -42,7 +42,7 @@ static uart_inst_t *uart_inst; #endif -#if CFG_TUH_RPI_PIO_USB || CFG_TUD_RPI_PIO_USB +#if (CFG_TUH_ENABLED && CFG_TUH_RPI_PIO_USB) || (CFG_TUD_ENABLED && CFG_TUD_RPI_PIO_USB) #include "pio_usb.h" #endif @@ -126,7 +126,7 @@ void stdio_rtt_init(void) { void board_init(void) { -#if CFG_TUH_RPI_PIO_USB || CFG_TUD_RPI_PIO_USB +#if (CFG_TUH_ENABLED && CFG_TUH_RPI_PIO_USB) || (CFG_TUD_ENABLED && CFG_TUD_RPI_PIO_USB) // Set the system clock to a multiple of 120mhz for bitbanging USB with pico-usb set_sys_clock_khz(120000, true); diff --git a/test/hil/rpi.json b/test/hil/rpi.json index 3f07a8f42..b75c1339b 100644 --- a/test/hil/rpi.json +++ b/test/hil/rpi.json @@ -14,11 +14,7 @@ "flasher_sn": "E6633861A3978538", "flasher_args": "-f interface/cmsis-dap.cfg -f target/atsame5x.cfg", "tests": { - "dual_attached": [ - { - "vid_pid": "1a86_55d4", "serial": "52D2002130" - } - ] + "dual_attached": [{"vid_pid": "1a86_55d4", "serial": "52D2002130"}] } }, { @@ -51,7 +47,10 @@ "uid": "E6614C311B764A37", "flasher": "openocd", "flasher_sn": "E6614103E72C1D2F", - "flasher_args": "-f interface/cmsis-dap.cfg -f target/rp2040.cfg -c \"adapter speed 5000\"" + "flasher_args": "-f interface/cmsis-dap.cfg -f target/rp2040.cfg -c \"adapter speed 5000\"", + "tests": { + "dual_attached": [{"vid_pid": "1a86_55d4", "serial": "52D2002470"}] + } }, { "name": "stm32f072disco", -- cgit v1.3.1 From 45d06cd4ab2adea07513243447b6ec729d7d8c2c Mon Sep 17 00:00:00 2001 From: hathach Date: Thu, 22 Aug 2024 22:25:14 +0700 Subject: skip dual/host_info_to_device_cdc for pico due to a bug in pio-usb --- hw/bsp/family_support.cmake | 2 +- hw/bsp/nrf/boards/feather_nrf52840_express/board.cmake | 2 +- test/hil/rpi.json | 1 + 3 files changed, 3 insertions(+), 2 deletions(-) (limited to 'test/hil') diff --git a/hw/bsp/family_support.cmake b/hw/bsp/family_support.cmake index 1df8a6f53..b457fcfac 100644 --- a/hw/bsp/family_support.cmake +++ b/hw/bsp/family_support.cmake @@ -463,7 +463,7 @@ function(family_flash_openocd TARGET) # note skip verify since it has issue with rp2040 add_custom_target(${TARGET}-openocd DEPENDS ${TARGET} - COMMAND ${OPENOCD} ${OPTION_LIST} -c init -c halt -c "program $ reset" ${OPTION_LIST2} -c exit + COMMAND ${OPENOCD} -c "tcl_port disabled" -c "gdb_port disabled" ${OPTION_LIST} -c init -c halt -c "program $" -c reset ${OPTION_LIST2} -c exit VERBATIM ) endfunction() diff --git a/hw/bsp/nrf/boards/feather_nrf52840_express/board.cmake b/hw/bsp/nrf/boards/feather_nrf52840_express/board.cmake index 6ff1a7b59..a0282aa23 100644 --- a/hw/bsp/nrf/boards/feather_nrf52840_express/board.cmake +++ b/hw/bsp/nrf/boards/feather_nrf52840_express/board.cmake @@ -2,7 +2,7 @@ set(MCU_VARIANT nrf52840) set(LD_FILE_GNU ${CMAKE_CURRENT_LIST_DIR}/../../linker/nrf52840_s140_v6.ld) # enable max3421 host driver for this board -set(MAX3421_HOST 1) +# set(MAX3421_HOST 1) function(update_board TARGET) endfunction() diff --git a/test/hil/rpi.json b/test/hil/rpi.json index b75c1339b..7821f1660 100644 --- a/test/hil/rpi.json +++ b/test/hil/rpi.json @@ -49,6 +49,7 @@ "flasher_sn": "E6614103E72C1D2F", "flasher_args": "-f interface/cmsis-dap.cfg -f target/rp2040.cfg -c \"adapter speed 5000\"", "tests": { + "skip": ["dual/host_info_to_device_cdc"], "dual_attached": [{"vid_pid": "1a86_55d4", "serial": "52D2002470"}] } }, -- cgit v1.3.1 From 29d4c82efb9654aa8739cd806a9e81d37830e23e Mon Sep 17 00:00:00 2001 From: hathach Date: Tue, 27 Aug 2024 16:38:26 +0700 Subject: reset usb when init for max32650/66. change hil max32 to use pico (cmsis dap2), change metro m4 flasher --- hw/bsp/max32650/family.c | 1 + hw/bsp/max32650/family.cmake | 2 +- hw/bsp/max32666/family.c | 1 + test/hil/rpi.json | 19 ++++++------------- 4 files changed, 9 insertions(+), 14 deletions(-) (limited to 'test/hil') diff --git a/hw/bsp/max32650/family.c b/hw/bsp/max32650/family.c index 89a5db160..bb382cdd4 100644 --- a/hw/bsp/max32650/family.c +++ b/hw/bsp/max32650/family.c @@ -94,6 +94,7 @@ void board_init(void) { } MXC_SYS_ClockEnable(MXC_SYS_PERIPH_CLOCK_USB); + MXC_SYS_Reset_Periph(MXC_SYS_RESET_USB); } //--------------------------------------------------------------------+ diff --git a/hw/bsp/max32650/family.cmake b/hw/bsp/max32650/family.cmake index e05bd7652..48853b92c 100644 --- a/hw/bsp/max32650/family.cmake +++ b/hw/bsp/max32650/family.cmake @@ -148,10 +148,10 @@ function(family_configure_example TARGET RTOS) # Flashing family_flash_jlink(${TARGET}) + family_flash_openocd_adi(${TARGET}) # Add the optional MSDK OpenOCD flashing family_flash_msdk(${TARGET}) - family_flash_openocd_adi(${TARGET}) endfunction() function(family_flash_msdk TARGET) diff --git a/hw/bsp/max32666/family.c b/hw/bsp/max32666/family.c index 8ee4b6762..f96393fe1 100644 --- a/hw/bsp/max32666/family.c +++ b/hw/bsp/max32666/family.c @@ -93,6 +93,7 @@ void board_init(void) { } MXC_SYS_ClockEnable(MXC_SYS_PERIPH_CLOCK_USB); + MXC_SYS_Reset_Periph(MXC_SYS_RESET_USB); } //--------------------------------------------------------------------+ diff --git a/test/hil/rpi.json b/test/hil/rpi.json index 7821f1660..259f8ca83 100644 --- a/test/hil/rpi.json +++ b/test/hil/rpi.json @@ -10,9 +10,9 @@ { "name": "metro_m4_express", "uid": "9995AD485337433231202020FF100A34", - "flasher": "openocd", - "flasher_sn": "E6633861A3978538", - "flasher_args": "-f interface/cmsis-dap.cfg -f target/atsame5x.cfg", + "flasher": "jlink", + "flasher_sn": "123456", + "flasher_args": "-device ATSAMD51J19", "tests": { "dual_attached": [{"vid_pid": "1a86_55d4", "serial": "52D2002130"}] } @@ -20,9 +20,9 @@ { "name": "max32666fthr", "uid": "0C81464124010B20FF0A08CC2C", - "flasher": "jlink", - "flasher_sn": "000801011822", - "flasher_args": "-device max32666" + "flasher": "openocd_adi", + "flasher_sn": "E6614C311B597D32", + "flasher_args": "-f interface/cmsis-dap.cfg -f target/max32665.cfg" }, { "name": "lpcxpresso11u37", @@ -92,13 +92,6 @@ "flasher": "esptool", "flasher_sn": "3ea619acd1cdeb11a0a0b806e93fd3f1", "flasher_args": "-b 921600" - }, - { - "name": "max32666fthr", - "uid": "0C81464124010B20FF0A08CC2C", - "flasher": "openocd_adi", - "flasher_sn": "042217023bffc88100000000000000000000000097969906", - "flasher_args": "-f interface/cmsis-dap.cfg -f target/max32665.cfg" } ] } -- cgit v1.3.1 From 6fdf206f11f3c540b1930693826a469f3ffcc240 Mon Sep 17 00:00:00 2001 From: hathach Date: Wed, 28 Aug 2024 11:43:14 +0700 Subject: bump up pio-usb to 0.6.1, enable dual hil test for pico --- test/hil/hil_test.py | 18 ++++++++++++------ test/hil/rpi.json | 1 - tools/get_deps.py | 2 +- 3 files changed, 13 insertions(+), 8 deletions(-) (limited to 'test/hil') diff --git a/test/hil/hil_test.py b/test/hil/hil_test.py index 5a4799cfb..52ec5ae1d 100644 --- a/test/hil/hil_test.py +++ b/test/hil/hil_test.py @@ -39,6 +39,9 @@ import fs ENUM_TIMEOUT = 30 +STATUS_OK = "\033[32mOK\033[0m" +STATUS_FAILED = "\033[31mFailed\033[0m" +STATUS_SKIPPED = "\033[33mSkipped\033[0m" # get usb serial by id def get_serial_dev(id, vendor_str, product_str, ifnum): @@ -411,7 +414,7 @@ def test_board(board): if not os.path.exists(fw_dir): fw_dir = f'examples/cmake-build-{name}/{test}' fw_name = f'{fw_dir}/{os.path.basename(test)}' - print(f'{name:30} {test:20} ... ', end='') + print(f'{name:25} {test:30} ... ', end='') if not os.path.exists(fw_dir): print('Skip') @@ -432,11 +435,11 @@ def test_board(board): print('OK') except Exception as e: err_count += 1 - print('Failed') + print(STATUS_FAILED) print(f' {e}') else: err_count += 1 - print('Flash failed') + print(f'Flash {STATUS_FAILED}') return err_count @@ -463,10 +466,13 @@ def main(): else: config_boards = [e for e in config['boards'] if e['name'] in boards] - err_count_list = [] with Pool(processes=os.cpu_count()) as pool: - err_count_list = pool.map(test_board, config_boards) - err_count = sum(err_count_list) + err_count = sum(pool.map(test_board, config_boards)) + + print() + print("-" * 30) + print(f'Total failed: {err_count}') + print("-" * 30) sys.exit(err_count) diff --git a/test/hil/rpi.json b/test/hil/rpi.json index 259f8ca83..36376a873 100644 --- a/test/hil/rpi.json +++ b/test/hil/rpi.json @@ -49,7 +49,6 @@ "flasher_sn": "E6614103E72C1D2F", "flasher_args": "-f interface/cmsis-dap.cfg -f target/rp2040.cfg -c \"adapter speed 5000\"", "tests": { - "skip": ["dual/host_info_to_device_cdc"], "dual_attached": [{"vid_pid": "1a86_55d4", "serial": "52D2002470"}] } }, diff --git a/tools/get_deps.py b/tools/get_deps.py index f141d3d41..06da54b41 100644 --- a/tools/get_deps.py +++ b/tools/get_deps.py @@ -58,7 +58,7 @@ deps_optional = { '144f1eb7ea8c06512e12f12b27383601c0272410', 'kinetis_k kinetis_k32l2 kinetis_kl lpc51 lpc54 lpc55 mcx imxrt'], 'hw/mcu/raspberry_pi/Pico-PIO-USB': ['https://github.com/sekigon-gonnoc/Pico-PIO-USB.git', - '7902e9fa8ed4a271d8d1d5e7e50516c2292b7bc2', + 'fe9133fc513b82cc3dc62c67cb51f2339cf29ef7', 'rp2040'], 'hw/mcu/renesas/fsp': ['https://github.com/renesas/fsp.git', 'd52e5a6a59b7c638da860c2bb309b6e78e752ff8', -- cgit v1.3.1 From c419b1e7c57ab701c904adfe6ebf14f780862557 Mon Sep 17 00:00:00 2001 From: hathach Date: Fri, 13 Sep 2024 19:12:26 +0700 Subject: add pico2 rp2350 (arm) board add pico2 to hil ci --- .idea/cmake.xml | 4 +++- .../boards/feather_rp2040_max3421/board.cmake | 1 + hw/bsp/rp2040/boards/raspberry_pi_pico/board.cmake | 1 + .../rp2040/boards/raspberry_pi_pico2/board.cmake | 2 ++ hw/bsp/rp2040/family.cmake | 27 +++++++++++++++------- test/hil/hil_test.py | 20 +++++++++++----- test/hil/rpi.json | 10 ++++++++ 7 files changed, 50 insertions(+), 15 deletions(-) create mode 100644 hw/bsp/rp2040/boards/raspberry_pi_pico2/board.cmake (limited to 'test/hil') diff --git a/.idea/cmake.xml b/.idea/cmake.xml index fec01a08e..96ff19c89 100644 --- a/.idea/cmake.xml +++ b/.idea/cmake.xml @@ -2,7 +2,9 @@ - + + + diff --git a/hw/bsp/rp2040/boards/feather_rp2040_max3421/board.cmake b/hw/bsp/rp2040/boards/feather_rp2040_max3421/board.cmake index b8e5890f3..2afe0f264 100644 --- a/hw/bsp/rp2040/boards/feather_rp2040_max3421/board.cmake +++ b/hw/bsp/rp2040/boards/feather_rp2040_max3421/board.cmake @@ -1,3 +1,4 @@ +set(PICO_PLATFORM rp2040) set(PICO_BOARD adafruit_feather_rp2040) # Enable MAX3421E USB Host diff --git a/hw/bsp/rp2040/boards/raspberry_pi_pico/board.cmake b/hw/bsp/rp2040/boards/raspberry_pi_pico/board.cmake index f9887c09c..804cdb50a 100644 --- a/hw/bsp/rp2040/boards/raspberry_pi_pico/board.cmake +++ b/hw/bsp/rp2040/boards/raspberry_pi_pico/board.cmake @@ -1 +1,2 @@ +set(PICO_PLATFORM rp2040) set(PICO_BOARD pico) diff --git a/hw/bsp/rp2040/boards/raspberry_pi_pico2/board.cmake b/hw/bsp/rp2040/boards/raspberry_pi_pico2/board.cmake new file mode 100644 index 000000000..3482e2674 --- /dev/null +++ b/hw/bsp/rp2040/boards/raspberry_pi_pico2/board.cmake @@ -0,0 +1,2 @@ +set(PICO_PLATFORM rp2350-arm-s) +set(PICO_BOARD pico2) diff --git a/hw/bsp/rp2040/family.cmake b/hw/bsp/rp2040/family.cmake index d91821ffa..8f01eac74 100644 --- a/hw/bsp/rp2040/family.cmake +++ b/hw/bsp/rp2040/family.cmake @@ -6,21 +6,32 @@ if (NOT BOARD) set(BOARD pico_sdk) endif() -if (TOOLCHAIN STREQUAL "clang") - set(PICO_COMPILER "pico_arm_clang") -else() - set(PICO_COMPILER "pico_arm_gcc") -endif() +include(${CMAKE_CURRENT_LIST_DIR}/boards/${BOARD}/board.cmake) + +#if (TOOLCHAIN STREQUAL "clang") +# set(PICO_COMPILER "pico_arm_clang") +#else() +# set(PICO_COMPILER "pico_arm_gcc") +#endif() # add the SDK in case we are standalone tinyusb example (noop if already present) include(${CMAKE_CURRENT_LIST_DIR}/pico_sdk_import.cmake) # include basic family CMake functionality set(FAMILY_MCUS RP2040) -set(JLINK_DEVICE rp2040_m0_0) -set(OPENOCD_OPTION "-f interface/cmsis-dap.cfg -f target/rp2040.cfg -c \"adapter speed 5000\"") -include(${CMAKE_CURRENT_LIST_DIR}/boards/${BOARD}/board.cmake) +if (PICO_PLATFORM STREQUAL "rp2040") + set(JLINK_DEVICE rp2040_m0_0) + set(OPENOCD_TARGET rp2040) +elseif (PICO_PLATFORM STREQUAL "rp2350-arm-s" OR PICO_PLATFORM STREQUAL "rp2350") + set(JLINK_DEVICE rp2350_m33_0) + set(OPENOCD_TARGET rp2350) +elseif (PICO_PLATFORM STREQUAL "rp2350-riscv") + set(JLINK_DEVICE rp2350_riscv_0) + set(OPENOCD_TARGET rp2350-riscv) +endif() + +set(OPENOCD_OPTION "-f interface/cmsis-dap.cfg -f target/${OPENOCD_TARGET}.cfg -c \"adapter speed 5000\"") if (NOT PICO_TINYUSB_PATH) set(PICO_TINYUSB_PATH ${TOP}) diff --git a/test/hil/hil_test.py b/test/hil/hil_test.py index 52ec5ae1d..a569e7666 100644 --- a/test/hil/hil_test.py +++ b/test/hil/hil_test.py @@ -43,6 +43,8 @@ STATUS_OK = "\033[32mOK\033[0m" STATUS_FAILED = "\033[31mFailed\033[0m" STATUS_SKIPPED = "\033[33mSkipped\033[0m" +verbose = False + # get usb serial by id def get_serial_dev(id, vendor_str, product_str, ifnum): if vendor_str and product_str: @@ -111,7 +113,6 @@ def read_disk_file(uid, lun, fname): # Flashing firmware # ------------------------------------------------------------- def run_cmd(cmd): - #print(cmd) r = subprocess.run(cmd, shell=True, stdout=subprocess.PIPE, stderr=subprocess.STDOUT) if r.returncode != 0: title = f'COMMAND FAILED: {cmd}' @@ -123,6 +124,9 @@ def run_cmd(cmd): else: print(title) print(r.stdout.decode("utf-8")) + elif verbose: + print(cmd) + print(r.stdout.decode("utf-8")) return r @@ -260,14 +264,14 @@ def test_device_cdc_dual_ports(board): str1 = b"test_no1" ser1.write(str1) ser1.flush() - assert ser1.read(100) == str1.lower(), 'Port1 wrong data' - assert ser2.read(100) == str1.upper(), 'Port2 wrong data' + assert ser1.read(len(str1)) == str1.lower(), 'Port1 wrong data' + assert ser2.read(len(str1)) == str1.upper(), 'Port2 wrong data' str2 = b"test_no2" ser2.write(str2) ser2.flush() - assert ser1.read(100) == str2.lower(), 'Port1 wrong data' - assert ser2.read(100) == str2.upper(), 'Port2 wrong data' + assert ser1.read(len(str2)) == str2.lower(), 'Port1 wrong data' + assert ser2.read(len(str2)) == str2.upper(), 'Port2 wrong data' def test_device_cdc_msc(board): @@ -279,7 +283,7 @@ def test_device_cdc_msc(board): str = b"test_str" ser.write(str) ser.flush() - assert ser.read(100) == str, 'CDC wrong data' + assert ser.read(len(str)) == str, 'CDC wrong data' # Block test data = read_disk_file(uid,0,'README.TXT') @@ -447,13 +451,17 @@ def main(): """ Hardware test on specified boards """ + global verbose + parser = argparse.ArgumentParser() parser.add_argument('config_file', help='Configuration JSON file') parser.add_argument('-b', '--board', action='append', default=[], help='Boards to test, all if not specified') + parser.add_argument('-v', '--verbose', action='store_true', help='Verbose output') args = parser.parse_args() config_file = args.config_file boards = args.board + verbose = args.verbose # if config file is not found, try to find it in the same directory as this script if not os.path.exists(config_file): diff --git a/test/hil/rpi.json b/test/hil/rpi.json index 36376a873..77919f346 100644 --- a/test/hil/rpi.json +++ b/test/hil/rpi.json @@ -52,6 +52,16 @@ "dual_attached": [{"vid_pid": "1a86_55d4", "serial": "52D2002470"}] } }, + { + "name": "raspberry_pi_pico2", + "uid": "560AE75E1C7152C9", + "flasher": "openocd", + "flasher_sn": "E6633861A3978538", + "flasher_args": "-f interface/cmsis-dap.cfg -f target/rp2350.cfg -c \"adapter speed 5000\"", + "tests": { + "dual_attached": [{"vid_pid": "1a86_55d4", "serial": "533D004242"}] + } + }, { "name": "stm32f072disco", "uid": "3A001A001357364230353532", -- cgit v1.3.1 From 616532892d913b7224806ed1e881b72ed66bb3e1 Mon Sep 17 00:00:00 2001 From: Shawn Hoffman Date: Tue, 17 Sep 2024 12:17:12 -0700 Subject: make all python files executable and standardize interpreter --- .github/workflows/ci_set_matrix.py | 1 + docs/conf.py | 1 + examples/device/audio_4_channel_mic/src/plot_audio_samples.py | 1 + examples/device/audio_4_channel_mic_freertos/src/plot_audio_samples.py | 1 + examples/device/audio_test/src/plot_audio_samples.py | 1 + examples/device/audio_test_freertos/src/plot_audio_samples.py | 1 + examples/device/audio_test_multi_rate/src/plot_audio_samples.py | 1 + examples/device/hid_generic_inout/hid_test.py | 1 + examples/device/uac2_speaker_fb/src/audio_debug.py | 1 + examples/device/usbtmc/visaQuery.py | 0 hw/bsp/fomu/dfu.py | 2 +- hw/mcu/sony/cxd56/tools/flash_writer.py | 2 +- hw/mcu/sony/cxd56/tools/xmodem.py | 1 + src/portable/synopsys/dwc2/dwc2_info.py | 1 + test/hil/hil_test.py | 1 + test/unit-test/vendor/ceedling/vendor/unity/auto/unity_test_summary.py | 2 +- test/unit-test/vendor/ceedling/vendor/unity/auto/unity_to_junit.py | 1 + tools/build.py | 1 + tools/build_utils.py | 1 + tools/gen_doc.py | 1 + tools/get_deps.py | 1 + tools/iar_gen.py | 2 +- tools/make_release.py | 1 + tools/mksunxi.py | 0 tools/pcapng_to_corpus.py | 2 +- 25 files changed, 23 insertions(+), 5 deletions(-) mode change 100644 => 100755 .github/workflows/ci_set_matrix.py mode change 100644 => 100755 docs/conf.py mode change 100644 => 100755 examples/device/audio_4_channel_mic/src/plot_audio_samples.py mode change 100644 => 100755 examples/device/audio_4_channel_mic_freertos/src/plot_audio_samples.py mode change 100644 => 100755 examples/device/audio_test/src/plot_audio_samples.py mode change 100644 => 100755 examples/device/audio_test_freertos/src/plot_audio_samples.py mode change 100644 => 100755 examples/device/audio_test_multi_rate/src/plot_audio_samples.py mode change 100644 => 100755 examples/device/hid_generic_inout/hid_test.py mode change 100644 => 100755 examples/device/uac2_speaker_fb/src/audio_debug.py mode change 100644 => 100755 examples/device/usbtmc/visaQuery.py mode change 100644 => 100755 hw/bsp/fomu/dfu.py mode change 100644 => 100755 hw/mcu/sony/cxd56/tools/xmodem.py mode change 100644 => 100755 src/portable/synopsys/dwc2/dwc2_info.py mode change 100644 => 100755 test/hil/hil_test.py mode change 100644 => 100755 test/unit-test/vendor/ceedling/vendor/unity/auto/unity_test_summary.py mode change 100644 => 100755 test/unit-test/vendor/ceedling/vendor/unity/auto/unity_to_junit.py mode change 100644 => 100755 tools/build.py mode change 100644 => 100755 tools/build_utils.py mode change 100644 => 100755 tools/gen_doc.py mode change 100644 => 100755 tools/get_deps.py mode change 100644 => 100755 tools/iar_gen.py mode change 100644 => 100755 tools/make_release.py mode change 100644 => 100755 tools/mksunxi.py (limited to 'test/hil') diff --git a/.github/workflows/ci_set_matrix.py b/.github/workflows/ci_set_matrix.py old mode 100644 new mode 100755 index 4da26bfea..fde6e81d6 --- a/.github/workflows/ci_set_matrix.py +++ b/.github/workflows/ci_set_matrix.py @@ -1,3 +1,4 @@ +#!/usr/bin/env python3 import json # toolchain, url diff --git a/docs/conf.py b/docs/conf.py old mode 100644 new mode 100755 index 878b29645..af44b7339 --- a/docs/conf.py +++ b/docs/conf.py @@ -1,3 +1,4 @@ +#!/usr/bin/env python3 # Configuration file for the Sphinx documentation builder. # # This file only contains a selection of the most common options. For a full diff --git a/examples/device/audio_4_channel_mic/src/plot_audio_samples.py b/examples/device/audio_4_channel_mic/src/plot_audio_samples.py old mode 100644 new mode 100755 index d17a908b6..4d61e7f5e --- a/examples/device/audio_4_channel_mic/src/plot_audio_samples.py +++ b/examples/device/audio_4_channel_mic/src/plot_audio_samples.py @@ -1,3 +1,4 @@ +#!/usr/bin/env python3 import sounddevice as sd import matplotlib.pyplot as plt import numpy as np diff --git a/examples/device/audio_4_channel_mic_freertos/src/plot_audio_samples.py b/examples/device/audio_4_channel_mic_freertos/src/plot_audio_samples.py old mode 100644 new mode 100755 index 8312b4e28..4d5ca28d6 --- a/examples/device/audio_4_channel_mic_freertos/src/plot_audio_samples.py +++ b/examples/device/audio_4_channel_mic_freertos/src/plot_audio_samples.py @@ -1,3 +1,4 @@ +#!/usr/bin/env python3 import sounddevice as sd import matplotlib.pyplot as plt import numpy as np diff --git a/examples/device/audio_test/src/plot_audio_samples.py b/examples/device/audio_test/src/plot_audio_samples.py old mode 100644 new mode 100755 index 1504684a6..ea6aa661e --- a/examples/device/audio_test/src/plot_audio_samples.py +++ b/examples/device/audio_test/src/plot_audio_samples.py @@ -1,3 +1,4 @@ +#!/usr/bin/env python3 import sounddevice as sd import matplotlib.pyplot as plt import numpy as np diff --git a/examples/device/audio_test_freertos/src/plot_audio_samples.py b/examples/device/audio_test_freertos/src/plot_audio_samples.py old mode 100644 new mode 100755 index 304b2d5de..46738eb3f --- a/examples/device/audio_test_freertos/src/plot_audio_samples.py +++ b/examples/device/audio_test_freertos/src/plot_audio_samples.py @@ -1,3 +1,4 @@ +#!/usr/bin/env python3 import sounddevice as sd import matplotlib.pyplot as plt import numpy as np diff --git a/examples/device/audio_test_multi_rate/src/plot_audio_samples.py b/examples/device/audio_test_multi_rate/src/plot_audio_samples.py old mode 100644 new mode 100755 index c92e49957..1f33a003e --- a/examples/device/audio_test_multi_rate/src/plot_audio_samples.py +++ b/examples/device/audio_test_multi_rate/src/plot_audio_samples.py @@ -1,3 +1,4 @@ +#!/usr/bin/env python3 import sounddevice as sd import matplotlib.pyplot as plt import numpy as np diff --git a/examples/device/hid_generic_inout/hid_test.py b/examples/device/hid_generic_inout/hid_test.py old mode 100644 new mode 100755 index 5bdba9db0..3aaca9d2c --- a/examples/device/hid_generic_inout/hid_test.py +++ b/examples/device/hid_generic_inout/hid_test.py @@ -1,3 +1,4 @@ +#!/usr/bin/env python3 # Install python3 HID package https://pypi.org/project/hid/ import hid diff --git a/examples/device/uac2_speaker_fb/src/audio_debug.py b/examples/device/uac2_speaker_fb/src/audio_debug.py old mode 100644 new mode 100755 index 336c46c01..05b49baf6 --- a/examples/device/uac2_speaker_fb/src/audio_debug.py +++ b/examples/device/uac2_speaker_fb/src/audio_debug.py @@ -1,3 +1,4 @@ +#!/usr/bin/env python3 # Install python3 HID package https://pypi.org/project/hid/ # Install python3 matplotlib package https://pypi.org/project/matplotlib/ diff --git a/examples/device/usbtmc/visaQuery.py b/examples/device/usbtmc/visaQuery.py old mode 100644 new mode 100755 diff --git a/hw/bsp/fomu/dfu.py b/hw/bsp/fomu/dfu.py old mode 100644 new mode 100755 index 32479350c..8383852e3 --- a/hw/bsp/fomu/dfu.py +++ b/hw/bsp/fomu/dfu.py @@ -1,4 +1,4 @@ -#!/usr/bin/python +#!/usr/bin/env python3 # Written by Antonio Galea - 2010/11/18 # Updated for DFU 1.1 by Sean Cross - 2020/03/31 diff --git a/hw/mcu/sony/cxd56/tools/flash_writer.py b/hw/mcu/sony/cxd56/tools/flash_writer.py index bf630547a..387e679da 100755 --- a/hw/mcu/sony/cxd56/tools/flash_writer.py +++ b/hw/mcu/sony/cxd56/tools/flash_writer.py @@ -1,4 +1,4 @@ -#! /usr/bin/env python3 +#!/usr/bin/env python3 # Copyright (C) 2018 Sony Semiconductor Solutions Corp. # diff --git a/hw/mcu/sony/cxd56/tools/xmodem.py b/hw/mcu/sony/cxd56/tools/xmodem.py old mode 100644 new mode 100755 index 60fcc952c..3ee2698f7 --- a/hw/mcu/sony/cxd56/tools/xmodem.py +++ b/hw/mcu/sony/cxd56/tools/xmodem.py @@ -1,3 +1,4 @@ +#!/usr/bin/env python3 ''' =============================== XMODEM file transfer protocol diff --git a/src/portable/synopsys/dwc2/dwc2_info.py b/src/portable/synopsys/dwc2/dwc2_info.py old mode 100644 new mode 100755 index 55bec3d23..9bbc18850 --- a/src/portable/synopsys/dwc2/dwc2_info.py +++ b/src/portable/synopsys/dwc2/dwc2_info.py @@ -1,3 +1,4 @@ +#!/usr/bin/env python3 import click import ctypes import pandas as pd diff --git a/test/hil/hil_test.py b/test/hil/hil_test.py old mode 100644 new mode 100755 index a569e7666..b2e17c8e3 --- a/test/hil/hil_test.py +++ b/test/hil/hil_test.py @@ -1,3 +1,4 @@ +#!/usr/bin/env python3 # # The MIT License (MIT) # diff --git a/test/unit-test/vendor/ceedling/vendor/unity/auto/unity_test_summary.py b/test/unit-test/vendor/ceedling/vendor/unity/auto/unity_test_summary.py old mode 100644 new mode 100755 index 00c0da8cc..a8e5b2726 --- a/test/unit-test/vendor/ceedling/vendor/unity/auto/unity_test_summary.py +++ b/test/unit-test/vendor/ceedling/vendor/unity/auto/unity_test_summary.py @@ -1,4 +1,4 @@ -#! python3 +#!/usr/bin/env python3 # ========================================== # Unity Project - A Test Framework for C # Copyright (c) 2015 Alexander Mueller / XelaRellum@web.de diff --git a/test/unit-test/vendor/ceedling/vendor/unity/auto/unity_to_junit.py b/test/unit-test/vendor/ceedling/vendor/unity/auto/unity_to_junit.py old mode 100644 new mode 100755 index 71dd56888..2379ad49a --- a/test/unit-test/vendor/ceedling/vendor/unity/auto/unity_to_junit.py +++ b/test/unit-test/vendor/ceedling/vendor/unity/auto/unity_to_junit.py @@ -1,3 +1,4 @@ +#!/usr/bin/env python3 import sys import os from glob import glob diff --git a/tools/build.py b/tools/build.py old mode 100644 new mode 100755 index f9ae68231..1f3a7e0af --- a/tools/build.py +++ b/tools/build.py @@ -1,3 +1,4 @@ +#!/usr/bin/env python3 import argparse import random import os diff --git a/tools/build_utils.py b/tools/build_utils.py old mode 100644 new mode 100755 index 5f88db8a2..357a95c93 --- a/tools/build_utils.py +++ b/tools/build_utils.py @@ -1,3 +1,4 @@ +#!/usr/bin/env python3 import subprocess import pathlib import time diff --git a/tools/gen_doc.py b/tools/gen_doc.py old mode 100644 new mode 100755 index 668c77ef6..c69f3ff29 --- a/tools/gen_doc.py +++ b/tools/gen_doc.py @@ -1,3 +1,4 @@ +#!/usr/bin/env python3 import pandas as pd from tabulate import tabulate from pathlib import Path diff --git a/tools/get_deps.py b/tools/get_deps.py old mode 100644 new mode 100755 index 06da54b41..84c6a9e61 --- a/tools/get_deps.py +++ b/tools/get_deps.py @@ -1,3 +1,4 @@ +#!/usr/bin/env python3 import argparse import sys import subprocess diff --git a/tools/iar_gen.py b/tools/iar_gen.py old mode 100644 new mode 100755 index ebcfa1423..8d45659db --- a/tools/iar_gen.py +++ b/tools/iar_gen.py @@ -1,4 +1,4 @@ -#!/usr/bin/python3 +#!/usr/bin/env python3 import os import sys diff --git a/tools/make_release.py b/tools/make_release.py old mode 100644 new mode 100755 index 3e653c12d..92c75baf9 --- a/tools/make_release.py +++ b/tools/make_release.py @@ -1,3 +1,4 @@ +#!/usr/bin/env python3 import re import gen_doc diff --git a/tools/mksunxi.py b/tools/mksunxi.py old mode 100644 new mode 100755 diff --git a/tools/pcapng_to_corpus.py b/tools/pcapng_to_corpus.py index 9c31365eb..3089f0bb6 100755 --- a/tools/pcapng_to_corpus.py +++ b/tools/pcapng_to_corpus.py @@ -1,4 +1,4 @@ -#!/bin/python3 +#!/usr/bin/env python3 import argparse import pcapng import zipfile -- cgit v1.3.1 From 40b55170c87da109b3416ac80eaa55ca56eadc77 Mon Sep 17 00:00:00 2001 From: hathach Date: Wed, 18 Sep 2024 20:27:34 +0700 Subject: skip pico2 dual test, it seems not stable --- test/hil/hil_test.py | 1 + test/hil/rpi.json | 1 + 2 files changed, 2 insertions(+) (limited to 'test/hil') diff --git a/test/hil/hil_test.py b/test/hil/hil_test.py index a569e7666..ec28328d4 100644 --- a/test/hil/hil_test.py +++ b/test/hil/hil_test.py @@ -411,6 +411,7 @@ def test_board(board): for skip in board_tests['skip']: if skip in test_list: test_list.remove(skip) + print(f'{name:25} {skip:30} ... Skip') err_count = 0 for test in test_list: diff --git a/test/hil/rpi.json b/test/hil/rpi.json index 77919f346..672e857fd 100644 --- a/test/hil/rpi.json +++ b/test/hil/rpi.json @@ -59,6 +59,7 @@ "flasher_sn": "E6633861A3978538", "flasher_args": "-f interface/cmsis-dap.cfg -f target/rp2350.cfg -c \"adapter speed 5000\"", "tests": { + "skip": ["dual/host_info_to_device_cdc"], "dual_attached": [{"vid_pid": "1a86_55d4", "serial": "533D004242"}] } }, -- cgit v1.3.1 From e209acb8d3624d3e6e6b6cee827bf4a97a4b138c Mon Sep 17 00:00:00 2001 From: Ha Thach Date: Mon, 30 Sep 2024 10:58:19 +0700 Subject: Migrate hil vm (#2822) * migrate hil to new x64 VM instead of rpi * re-enable hil for s3 --- .github/workflows/build_util.yml | 18 +++++++ .github/workflows/hil_test.yml | 56 +++++++------------- test/hil/hil_test.py | 51 ++++++++++--------- test/hil/requirements.txt | 2 + test/hil/rpi.json | 107 --------------------------------------- test/hil/tinyusb.json | 107 +++++++++++++++++++++++++++++++++++++++ 6 files changed, 173 insertions(+), 168 deletions(-) create mode 100644 test/hil/requirements.txt delete mode 100644 test/hil/rpi.json create mode 100644 test/hil/tinyusb.json (limited to 'test/hil') diff --git a/.github/workflows/build_util.yml b/.github/workflows/build_util.yml index ff98aef2d..294d18140 100644 --- a/.github/workflows/build_util.yml +++ b/.github/workflows/build_util.yml @@ -16,6 +16,10 @@ on: required: false default: false type: boolean + upload-artifacts: + required: false + default: false + type: boolean os: required: false type: string @@ -62,3 +66,17 @@ jobs: python tools/build.py -s ${{ inputs.build-system }} ${{ steps.setup-toolchain.outputs.build_option }} ${{ steps.set-one-per-family.outputs.build_option }} ${{ matrix.arg }} fi shell: bash + + - name: Upload Artifacts for Hardware Testing + if: ${{ inputs.upload-artifacts }} + uses: actions/upload-artifact@v4 + with: + name: ${{ matrix.arg }} + path: | + cmake-build/cmake-build-*/*/*/*.elf + cmake-build/cmake-build-*/*/*/*.bin + cmake-build/cmake-build-*/*/*/*.bin + cmake-build/cmake-build-*/*/*/bootloader/bootloader.bin + cmake-build/cmake-build-*/*/*/partition_table/partition-table.bin + cmake-build/cmake-build-*/*/*/config.env + cmake-build/cmake-build-*/*/*/flash_args diff --git a/.github/workflows/hil_test.yml b/.github/workflows/hil_test.yml index 087374be2..6ece44922 100644 --- a/.github/workflows/hil_test.yml +++ b/.github/workflows/hil_test.yml @@ -18,7 +18,7 @@ concurrency: cancel-in-progress: true env: - HIL_JSON: test/hil/rpi.json + HIL_JSON: test/hil/tinyusb.json jobs: set-matrix: @@ -32,7 +32,10 @@ jobs: - name: Generate matrix json id: set-matrix-json run: | - MATRIX_JSON=$(jq -c '{ "arm-gcc": [.boards[] | select(.flasher != "esptool" and .flasher != "openocd_wch") | .name] }' ${{ env.HIL_JSON }}) + MATRIX_ARMGCC=$(jq -c '{ "arm-gcc": { "family": [.boards[] | select(.flasher != "esptool" and .flasher != "openocd_wch") | "-b \(.name)"] } }' "${{ env.HIL_JSON }}") + MATRIX_ESP=$(jq -c '{ "esp-idf": { "family": [.boards[] | select(.flasher == "esptool") | "-b \(.name)"] } }' "${{ env.HIL_JSON }}") + MATRIX_RISCV=$(jq -c '{ "riscv-gcc": { "family": [.boards[] | select(.flasher == "openocd_wch") | "-b \(.name)"] } }' "${{ env.HIL_JSON }}") + MATRIX_JSON=$(jq -nc --argjson arm "$MATRIX_ARMGCC" --argjson esp "$MATRIX_ESP" --argjson riscv "$MATRIX_RISCV" '$arm + $esp + $riscv') echo "matrix=$MATRIX_JSON" echo "matrix=$MATRIX_JSON" >> $GITHUB_OUTPUT @@ -42,44 +45,28 @@ jobs: build: if: github.repository_owner == 'hathach' needs: set-matrix - runs-on: ubuntu-latest + uses: ./.github/workflows/build_util.yml strategy: fail-fast: false matrix: - board: ${{ fromJSON(needs.set-matrix.outputs.json)['arm-gcc'] }} - steps: - - name: Checkout TinyUSB - uses: actions/checkout@v4 - - - name: Setup arm-gcc toolchain - uses: ./.github/actions/setup_toolchain - with: - toolchain: 'arm-gcc' - - - name: Get Dependencies - uses: ./.github/actions/get_deps - with: - arg: -b${{ matrix.board }} - - - name: Build - run: python tools/build.py -b${{ matrix.board }} - - - name: Upload Artifacts for Hardware Testing - uses: actions/upload-artifact@v4 - with: - name: ${{ matrix.board }} - path: | - cmake-build/cmake-build-*/*/*/*.elf - cmake-build/cmake-build-*/*/*/*.bin + toolchain: + - 'arm-gcc' + - 'esp-idf' + with: + build-system: 'cmake' + toolchain: ${{ matrix.toolchain }} + build-args: ${{ toJSON(fromJSON(needs.set-matrix.outputs.json)[matrix.toolchain].family) }} + one-per-family: true + upload-artifacts: true # --------------------------------------- # Hardware in the loop (HIL) - # self-hosted running on an RPI. For attached hardware checkout test/hil/rpi.json + # self-hosted running on an VM. For attached hardware checkout test/hil/tinyusb.json # --------------------------------------- - hil-rpi: + hil-tinyusb: if: github.repository_owner == 'hathach' needs: build - runs-on: [self-hosted, ARM64, rpi, hardware-in-the-loop] + runs-on: [self-hosted, X64, hathach, hardware-in-the-loop] steps: - name: Clean workspace run: | @@ -87,13 +74,6 @@ jobs: rm -rf "${{ github.workspace }}" mkdir -p "${{ github.workspace }}" - # USB bus on rpi is not stable, reset it before testing -# - name: Reset USB bus -# run: | -# echo "1-2" | sudo tee /sys/bus/usb/drivers/usb/unbind -# sleep 5 -# echo "1-2" | sudo tee /sys/bus/usb/drivers/usb/bind - - name: Checkout TinyUSB uses: actions/checkout@v4 with: diff --git a/test/hil/hil_test.py b/test/hil/hil_test.py index ec28328d4..2d14220c5 100644 --- a/test/hil/hil_test.py +++ b/test/hil/hil_test.py @@ -45,6 +45,11 @@ STATUS_SKIPPED = "\033[33mSkipped\033[0m" verbose = False +# ------------------------------------------------------------- +# Path +# ------------------------------------------------------------- +OPENCOD_ADI_PATH = f'{os.getenv("HOME")}/app/openocd_adi' + # get usb serial by id def get_serial_dev(id, vendor_str, product_str, ifnum): if vendor_str and product_str: @@ -112,8 +117,8 @@ def read_disk_file(uid, lun, fname): # ------------------------------------------------------------- # Flashing firmware # ------------------------------------------------------------- -def run_cmd(cmd): - r = subprocess.run(cmd, shell=True, stdout=subprocess.PIPE, stderr=subprocess.STDOUT) +def run_cmd(cmd, cwd=None): + r = subprocess.run(cmd, cwd=cwd, shell=True, stdout=subprocess.PIPE, stderr=subprocess.STDOUT) if r.returncode != 0: title = f'COMMAND FAILED: {cmd}' print() @@ -187,11 +192,7 @@ echo "Ready for Remote Connections" def flash_openocd_adi(board, firmware): - openocd_adi_script_path = f'{os.getenv("HOME")}/app/openocd_adi/tcl' - if not os.path.exists(openocd_adi_script_path): - openocd_adi_script_path = '/home/pi/openocd_adi/tcl' - - ret = run_cmd(f'openocd_adi -c "adapter serial {board["flasher_sn"]}" -s {openocd_adi_script_path} ' + ret = run_cmd(f'{OPENCOD_ADI_PATH}/src/openocd -c "adapter serial {board["flasher_sn"]}" -s {OPENCOD_ADI_PATH}/tcl ' f'{board["flasher_args"]} -c "program {firmware}.elf reset exit"') return ret @@ -203,14 +204,14 @@ def flash_wlink_rs(board, firmware): def flash_esptool(board, firmware): port = get_serial_dev(board["flasher_sn"], None, None, 0) - dir = os.path.dirname(f'{firmware}.bin') - with open(f'{dir}/config.env') as f: - IDF_TARGET = json.load(f)['IDF_TARGET'] - with open(f'{dir}/flash_args') as f: + fw_dir = os.path.dirname(f'{firmware}.bin') + with open(f'{fw_dir}/config.env') as f: + idf_target = json.load(f)['IDF_TARGET'] + with open(f'{fw_dir}/flash_args') as f: flash_args = f.read().strip().replace('\n', ' ') - command = (f'esptool.py --chip {IDF_TARGET} -p {port} {board["flasher_args"]} ' + command = (f'esptool.py --chip {idf_target} -p {port} {board["flasher_args"]} ' f'--before=default_reset --after=hard_reset write_flash {flash_args}') - ret = subprocess.run(command, shell=True, cwd=dir, stdout=subprocess.PIPE, stderr=subprocess.STDOUT) + ret = run_cmd(command, cwd=fw_dir) return ret @@ -305,8 +306,7 @@ def test_device_dfu(board): # Wait device enum timeout = ENUM_TIMEOUT while timeout: - ret = subprocess.run(f'dfu-util -l', - shell=True, stdout=subprocess.PIPE, stderr=subprocess.STDOUT) + ret = run_cmd(f'dfu-util -l') stdout = ret.stdout.decode() if f'serial="{uid}"' in stdout and 'Found DFU: [cafe:4000]' in stdout: break @@ -347,8 +347,7 @@ def test_device_dfu_runtime(board): # Wait device enum timeout = ENUM_TIMEOUT while timeout: - ret = subprocess.run(f'dfu-util -l', - shell=True, stdout=subprocess.PIPE, stderr=subprocess.STDOUT) + ret = run_cmd(f'dfu-util -l') stdout = ret.stdout.decode() if f'serial="{uid}"' in stdout and 'Found Runtime: [cafe:4000]' in stdout: break @@ -382,17 +381,18 @@ def test_device_hid_composite_freertos(id): # ------------------------------------------------------------- # Main # ------------------------------------------------------------- -# all possible tests: board_test is added last to disable board's usb -all_tests = [ +# device tests +device_tests = [ 'device/cdc_dual_ports', 'device/cdc_msc', 'device/dfu', 'device/cdc_msc_freertos', # don't test 2 cdc_msc next to each other 'device/dfu_runtime', 'device/hid_boot_interface', +] +dual_tests = [ 'dual/host_info_to_device_cdc', - 'device/board_test' ] @@ -401,17 +401,22 @@ def test_board(board): flasher = board['flasher'].lower() # default to all tests - test_list = list(all_tests) + test_list = list(device_tests) if 'tests' in board: board_tests = board['tests'] if 'only' in board_tests: - test_list = board_tests['only'] + ['device/board_test'] + test_list = board_tests['only'] if 'skip' in board_tests: for skip in board_tests['skip']: if skip in test_list: test_list.remove(skip) print(f'{name:25} {skip:30} ... Skip') + if 'dual_attached' in board_tests: + test_list += dual_tests + + # board_test is added last to disable board's usb + test_list.append('device/board_test') err_count = 0 for test in test_list: @@ -422,7 +427,7 @@ def test_board(board): print(f'{name:25} {test:30} ... ', end='') if not os.path.exists(fw_dir): - print('Skip') + print('Skip (no binary)') continue # flash firmware. It may fail randomly, retry a few times diff --git a/test/hil/requirements.txt b/test/hil/requirements.txt new file mode 100644 index 000000000..c33980c9d --- /dev/null +++ b/test/hil/requirements.txt @@ -0,0 +1,2 @@ +fs +pyfatfs diff --git a/test/hil/rpi.json b/test/hil/rpi.json deleted file mode 100644 index 672e857fd..000000000 --- a/test/hil/rpi.json +++ /dev/null @@ -1,107 +0,0 @@ -{ - "boards": [ - { - "name": "feather_nrf52840_express", - "uid": "1F0479CD0F764471", - "flasher": "jlink", - "flasher_sn": "000682804350", - "flasher_args": "-device nrf52840_xxaa" - }, - { - "name": "metro_m4_express", - "uid": "9995AD485337433231202020FF100A34", - "flasher": "jlink", - "flasher_sn": "123456", - "flasher_args": "-device ATSAMD51J19", - "tests": { - "dual_attached": [{"vid_pid": "1a86_55d4", "serial": "52D2002130"}] - } - }, - { - "name": "max32666fthr", - "uid": "0C81464124010B20FF0A08CC2C", - "flasher": "openocd_adi", - "flasher_sn": "E6614C311B597D32", - "flasher_args": "-f interface/cmsis-dap.cfg -f target/max32665.cfg" - }, - { - "name": "lpcxpresso11u37", - "uid": "17121919", - "flasher": "jlink", - "flasher_sn": "000724441579", - "flasher_args": "-device LPC11U37/401" - }, - { - "name": "ra4m1_ek", - "uid": "152E163038303131393346E46F26574B", - "tests": { - "skip": ["device/cdc_msc", "device/cdc_msc_freertos"] - }, - "comment": "MSC is slow to enumerated #2602", - "flasher": "jlink", - "flasher_sn": "000831174392", - "flasher_args": "-device R7FA4M1AB" - }, - { - "name": "raspberry_pi_pico", - "uid": "E6614C311B764A37", - "flasher": "openocd", - "flasher_sn": "E6614103E72C1D2F", - "flasher_args": "-f interface/cmsis-dap.cfg -f target/rp2040.cfg -c \"adapter speed 5000\"", - "tests": { - "dual_attached": [{"vid_pid": "1a86_55d4", "serial": "52D2002470"}] - } - }, - { - "name": "raspberry_pi_pico2", - "uid": "560AE75E1C7152C9", - "flasher": "openocd", - "flasher_sn": "E6633861A3978538", - "flasher_args": "-f interface/cmsis-dap.cfg -f target/rp2350.cfg -c \"adapter speed 5000\"", - "tests": { - "skip": ["dual/host_info_to_device_cdc"], - "dual_attached": [{"vid_pid": "1a86_55d4", "serial": "533D004242"}] - } - }, - { - "name": "stm32f072disco", - "uid": "3A001A001357364230353532", - "flasher": "jlink", - "flasher_sn": "779541626", - "flasher_args": "-device stm32f072rb" - }, - { - "name": "stm32g0b1nucleo", - "uid": "4D0038000450434E37343120", - "flasher": "openocd", - "flasher_sn": "066FFF495087534867063844", - "flasher_args": "-f interface/stlink.cfg -f target/stm32g0x.cfg" - } - ], - "boards-skip": [ - { - "name": "mimxrt1015_evk", - "uid": "DC28F865D2111D228D00B0543A70463C", - "flasher": "jlink", - "flasher_sn": "000726284213", - "flasher_args": "-device MIMXRT1015DAF5A" - }, - { - "name": "nanoch32v203", - "uid": "CDAB277B0FBC03E339E339E3", - "flasher": "openocd_wch", - "flasher_sn": "EBCA8F0670AF", - "flasher_args": "" - }, - { - "name": "espressif_s3_devkitm", - "uid": "84F703C084E4", - "tests": { - "only": ["device/cdc_msc_freertos", "device/hid_composite_freertos"] - }, - "flasher": "esptool", - "flasher_sn": "3ea619acd1cdeb11a0a0b806e93fd3f1", - "flasher_args": "-b 921600" - } - ] -} diff --git a/test/hil/tinyusb.json b/test/hil/tinyusb.json new file mode 100644 index 000000000..fcd004c6d --- /dev/null +++ b/test/hil/tinyusb.json @@ -0,0 +1,107 @@ +{ + "boards": [ + { + "name": "feather_nrf52840_express", + "uid": "1F0479CD0F764471", + "flasher": "jlink", + "flasher_sn": "000682804350", + "flasher_args": "-device nrf52840_xxaa" + }, + { + "name": "metro_m4_express", + "uid": "9995AD485337433231202020FF100A34", + "flasher": "jlink", + "flasher_sn": "123456", + "flasher_args": "-device ATSAMD51J19", + "tests": { + "dual_attached": [{"vid_pid": "1a86_55d4", "serial": "52D2002130"}] + } + }, + { + "name": "max32666fthr", + "uid": "0C81464124010B20FF0A08CC2C", + "flasher": "openocd_adi", + "flasher_sn": "E6614C311B597D32", + "flasher_args": "-f interface/cmsis-dap.cfg -f target/max32665.cfg" + }, + { + "name": "lpcxpresso11u37", + "uid": "17121919", + "flasher": "jlink", + "flasher_sn": "000724441579", + "flasher_args": "-device LPC11U37/401" + }, + { + "name": "ra4m1_ek", + "uid": "152E163038303131393346E46F26574B", + "tests": { + "skip": ["device/cdc_msc", "device/cdc_msc_freertos"] + }, + "comment": "MSC is slow to enumerated #2602", + "flasher": "jlink", + "flasher_sn": "000831174392", + "flasher_args": "-device R7FA4M1AB" + }, + { + "name": "raspberry_pi_pico", + "uid": "E6614C311B764A37", + "flasher": "openocd", + "flasher_sn": "E6614103E72C1D2F", + "flasher_args": "-f interface/cmsis-dap.cfg -f target/rp2040.cfg -c \"adapter speed 5000\"", + "tests": { + "dual_attached": [{"vid_pid": "1a86_55d4", "serial": "52D2002470"}] + } + }, + { + "name": "raspberry_pi_pico2", + "uid": "560AE75E1C7152C9", + "flasher": "openocd", + "flasher_sn": "E6633861A3978538", + "flasher_args": "-f interface/cmsis-dap.cfg -f target/rp2350.cfg -c \"adapter speed 5000\"", + "tests": { + "skip": ["dual/host_info_to_device_cdc"], + "dual_attached": [{"vid_pid": "1a86_55d4", "serial": "533D004242"}] + } + }, + { + "name": "stm32f072disco", + "uid": "3A001A001357364230353532", + "flasher": "jlink", + "flasher_sn": "779541626", + "flasher_args": "-device stm32f072rb" + }, + { + "name": "stm32g0b1nucleo", + "uid": "4D0038000450434E37343120", + "flasher": "openocd", + "flasher_sn": "066FFF495087534867063844", + "flasher_args": "-f interface/stlink.cfg -f target/stm32g0x.cfg" + }, + { + "name": "espressif_s3_devkitm", + "uid": "84F703C084E4", + "tests": { + "only": ["device/cdc_msc_freertos", "device/hid_composite_freertos"] + }, + "flasher": "esptool", + "flasher_sn": "3ea619acd1cdeb11a0a0b806e93fd3f1", + "flasher_args": "-b 921600" + } + ], + "boards-skip": [ + { + "name": "mimxrt1015_evk", + "uid": "DC28F865D2111D228D00B0543A70463C", + "flasher": "jlink", + "flasher_sn": "000726284213", + "flasher_args": "-device MIMXRT1015DAF5A" + }, + { + "name": "nanoch32v203", + "uid": "CDAB277B0FBC03E339E339E3", + "flasher": "openocd_wch", + "flasher_sn": "EBCA8F0670AF", + "flasher_args": "" + } + ] +} -- cgit v1.3.1 From 47233f863a5fa5255461514fada9af7771cf2146 Mon Sep 17 00:00:00 2001 From: hathach Date: Wed, 18 Sep 2024 17:59:04 +0700 Subject: update to dwc2 register struct --- src/portable/synopsys/dwc2/dwc2_info.md | 110 +++++++++++++------------- src/portable/synopsys/dwc2/dwc2_info.py | 27 +++---- src/portable/synopsys/dwc2/dwc2_type.h | 136 +++++++++++++++++++++++++++----- test/hil/hil_test.py | 5 +- 4 files changed, 187 insertions(+), 91 deletions(-) (limited to 'test/hil') diff --git a/src/portable/synopsys/dwc2/dwc2_info.md b/src/portable/synopsys/dwc2/dwc2_info.md index 8690a0755..a11b79671 100644 --- a/src/portable/synopsys/dwc2/dwc2_info.md +++ b/src/portable/synopsys/dwc2/dwc2_info.md @@ -1,55 +1,55 @@ -| | BCM2711 (Pi4) | EFM32GG FullSpeed | ESP32-S2 | STM32F407 Fullspeed | STM32F407 Highspeed | STM32F411 Fullspeed | STM32F412 Fullspeed | STM32F429 Fullspeed | STM32F429 Highspeed | STM32F723 Fullspeed | STM32F723 HighSpeed | STM32F767 Fullspeed | STM32H743 Highspeed | STM32L476 Fullspeed | STM32U5A5 Highspeed | GD32VF103 Fullspeed | XMC4500 | -|:----------------------------|:----------------|:--------------------|:-----------|:----------------------|:----------------------|:----------------------|:----------------------|:----------------------|:----------------------|:----------------------|:----------------------|:----------------------|:----------------------|:----------------------|:----------------------|:----------------------|:-----------| -| guid | 0x2708A000 | 0x00000000 | 0x00000000 | 0x00001200 | 0x00001100 | 0x00001200 | 0x00002000 | 0x00001200 | 0x00001100 | 0x00003000 | 0x00003100 | 0x00002000 | 0x00002300 | 0x00002000 | 0x00005000 | 0x00001000 | 0x00AEC000 | -| gsnpsid | 0x4F54280A | 0x4F54330A | 0x4F54400A | 0x4F54281A | 0x4F54281A | 0x4F54281A | 0x4F54320A | 0x4F54281A | 0x4F54281A | 0x4F54330A | 0x4F54330A | 0x4F54320A | 0x4F54330A | 0x4F54310A | 0x4F54411A | 0x00000000 | 0x4F54292A | -| - specs version | 2.80a | 3.30a | 4.00a | 2.81a | 2.81a | 2.81a | 3.20a | 2.81a | 2.81a | 3.30a | 3.30a | 3.20a | 3.30a | 3.10a | 4.11a | 0.00W | 2.92a | -| ghwcfg1 | 0x00000000 | 0x00000000 | 0x00000000 | 0x00000000 | 0x00000000 | 0x00000000 | 0x00000000 | 0x00000000 | 0x00000000 | 0x00000000 | 0x00000000 | 0x00000000 | 0x00000000 | 0x00000000 | 0x00000000 | 0x00000000 | 0x00000000 | -| ghwcfg2 | 0x228DDD50 | 0x228F5910 | 0x224DD930 | 0x229DCD20 | 0x229ED590 | 0x229DCD20 | 0x229ED520 | 0x229DCD20 | 0x229ED590 | 0x229ED520 | 0x229FE1D0 | 0x229ED520 | 0x229FE190 | 0x229ED520 | 0x228FE052 | 0x00000000 | 0x228F5930 | -| - op_mode | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 2 | 0 | 0 | -| - arch | 2 | 2 | 2 | 0 | 2 | 0 | 0 | 0 | 2 | 0 | 2 | 0 | 2 | 0 | 2 | 0 | 2 | -| - point2point | 0 | 0 | 1 | 1 | 0 | 1 | 1 | 1 | 0 | 1 | 0 | 1 | 0 | 1 | 0 | 0 | 1 | -| - hs_phy_type | 1 | 0 | 0 | 0 | 2 | 0 | 0 | 0 | 2 | 0 | 3 | 0 | 2 | 0 | 1 | 0 | 0 | -| - fs_phy_type | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 0 | 0 | 1 | -| - num_dev_ep | 7 | 6 | 6 | 3 | 5 | 3 | 5 | 3 | 5 | 5 | 8 | 5 | 8 | 5 | 8 | 0 | 6 | -| - num_host_ch | 7 | 13 | 7 | 7 | 11 | 7 | 11 | 7 | 11 | 11 | 15 | 11 | 15 | 11 | 15 | 0 | 13 | -| - period_channel_support | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 0 | 1 | -| - enable_dynamic_fifo | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 0 | 1 | -| - mul_cpu_int | 0 | 0 | 0 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 0 | 0 | 0 | -| - reserved21 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | -| - nperiod_tx_q_depth | 2 | 2 | 1 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 0 | 2 | -| - host_period_tx_q_depth | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 0 | 2 | -| - dev_token_q_depth | 8 | 8 | 8 | 8 | 8 | 8 | 8 | 8 | 8 | 8 | 8 | 8 | 8 | 8 | 8 | 0 | 8 | -| - otg_enable_ic_usb | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | -| ghwcfg3 | 0x0FF000E8 | 0x01F204E8 | 0x00C804B5 | 0x020001E8 | 0x03F403E8 | 0x020001E8 | 0x0200D1E8 | 0x020001E8 | 0x03F403E8 | 0x0200D1E8 | 0x03EED2E8 | 0x0200D1E8 | 0x03B8D2E8 | 0x0200D1E8 | 0x03B882E8 | 0x00000000 | 0x027A01E5 | -| - xfer_size_width | 8 | 8 | 5 | 8 | 8 | 8 | 8 | 8 | 8 | 8 | 8 | 8 | 8 | 8 | 8 | 0 | 5 | -| - packet_size_width | 6 | 6 | 3 | 6 | 6 | 6 | 6 | 6 | 6 | 6 | 6 | 6 | 6 | 6 | 6 | 0 | 6 | -| - otg_enable | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 0 | 1 | -| - i2c_enable | 0 | 0 | 0 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 0 | 1 | 0 | 1 | 0 | 0 | 1 | -| - vendor_ctrl_itf | 0 | 0 | 0 | 0 | 1 | 0 | 0 | 0 | 1 | 0 | 1 | 0 | 1 | 0 | 1 | 0 | 0 | -| - optional_feature_removed | 0 | 1 | 1 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | -| - synch_reset | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | -| - otg_adp_support | 0 | 0 | 0 | 0 | 0 | 0 | 1 | 0 | 0 | 1 | 1 | 1 | 1 | 1 | 0 | 0 | 0 | -| - otg_enable_hsic | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | -| - battery_charger_support | 0 | 0 | 0 | 0 | 0 | 0 | 1 | 0 | 0 | 1 | 1 | 1 | 1 | 1 | 0 | 0 | 0 | -| - lpm_mode | 0 | 0 | 0 | 0 | 0 | 0 | 1 | 0 | 0 | 1 | 1 | 1 | 1 | 1 | 1 | 0 | 0 | -| - total_fifo_size | 4080 | 498 | 200 | 512 | 1012 | 512 | 512 | 512 | 1012 | 512 | 1006 | 512 | 952 | 512 | 952 | 0 | 634 | -| ghwcfg4 | 0x1FF00020 | 0x1BF08030 | 0xD3F0A030 | 0x0FF08030 | 0x17F00030 | 0x0FF08030 | 0x17F08030 | 0x0FF08030 | 0x17F00030 | 0x17F08030 | 0x23F00030 | 0x17F08030 | 0xE3F00030 | 0x17F08030 | 0xE2103E30 | 0x00000000 | 0xDBF08030 | -| - num_dev_period_in_ep | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | -| - power_optimized | 0 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 0 | 1 | -| - ahb_freq_min | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 0 | 1 | -| - hibernation | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | -| - reserved7 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 4 | 0 | 0 | -| - service_interval_mode | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 1 | 0 | 0 | -| - ipg_isoc_en | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 1 | 0 | 0 | -| - acg_enable | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 1 | 0 | 0 | -| - reserved13 | 0 | 0 | 1 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 1 | 0 | 0 | -| - utmi_phy_data_width | 0 | 2 | 2 | 2 | 0 | 2 | 2 | 2 | 0 | 2 | 0 | 2 | 0 | 2 | 0 | 0 | 2 | -| - dev_ctrl_ep_num | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | -| - iddg_filter_enabled | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 0 | 1 | -| - vbus_valid_filter_enabled | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 0 | 0 | 1 | -| - a_valid_filter_enabled | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 0 | 0 | 1 | -| - b_valid_filter_enabled | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 0 | 0 | 1 | -| - dedicated_fifos | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 0 | 0 | 1 | -| - num_dev_in_eps | 15 | 13 | 9 | 7 | 11 | 7 | 11 | 7 | 11 | 11 | 1 | 11 | 1 | 11 | 1 | 0 | 13 | -| - dma_desc_enable | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 1 | 0 | 1 | 0 | 1 | 0 | 0 | -| - dma_dynamic | 0 | 0 | 1 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 1 | 0 | 1 | 0 | 1 | +| | BCM2711 (Pi4) | EFM32GG FS | ESP32-S2/S3 | STM32F 407/411/429 FS | STM32F407 HS | STM32F412 FS | STM32F429 HS | STM32F723 FS | STM32F723 HS | STM32F767 FS | STM32H743 HS | STM32L476 FS | STM32U5A5 HS | GD32VF103 FS | XMC4500 | +|:----------------------------|:----------------|:-------------|:--------------|:------------------------|:---------------|:---------------|:---------------|:---------------|:---------------|:---------------|:---------------|:---------------|:---------------|:---------------|:-----------| +| guid | 0x2708A000 | 0x00000000 | 0x00000000 | 0x00001200 | 0x00001100 | 0x00002000 | 0x00001100 | 0x00003000 | 0x00003100 | 0x00002000 | 0x00002300 | 0x00002000 | 0x00005000 | 0x00001000 | 0x00AEC000 | +| gsnpsid | 0x4F54280A | 0x4F54330A | 0x4F54400A | 0x4F54281A | 0x4F54281A | 0x4F54320A | 0x4F54281A | 0x4F54330A | 0x4F54330A | 0x4F54320A | 0x4F54330A | 0x4F54310A | 0x4F54411A | 0x00000000 | 0x4F54292A | +| - specs version | 2.80a | 3.30a | 4.00a | 2.81a | 2.81a | 3.20a | 2.81a | 3.30a | 3.30a | 3.20a | 3.30a | 3.10a | 4.11a | 0.00W | 2.92a | +| ghwcfg1 | 0x00000000 | 0x00000000 | 0x00000000 | 0x00000000 | 0x00000000 | 0x00000000 | 0x00000000 | 0x00000000 | 0x00000000 | 0x00000000 | 0x00000000 | 0x00000000 | 0x00000000 | 0x00000000 | 0x00000000 | +| ghwcfg2 | 0x228DDD50 | 0x228F5910 | 0x224DD930 | 0x229DCD20 | 0x229ED590 | 0x229ED520 | 0x229ED590 | 0x229ED520 | 0x229FE1D0 | 0x229ED520 | 0x229FE190 | 0x229ED520 | 0x228FE052 | 0x00000000 | 0x228F5930 | +| - op_mode | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 2 | 0 | 0 | +| - arch | 2 | 2 | 2 | 0 | 2 | 0 | 2 | 0 | 2 | 0 | 2 | 0 | 2 | 0 | 2 | +| - point2point | 0 | 0 | 1 | 1 | 0 | 1 | 0 | 1 | 0 | 1 | 0 | 1 | 0 | 0 | 1 | +| - hs_phy_type | 1 | 0 | 0 | 0 | 2 | 0 | 2 | 0 | 3 | 0 | 2 | 0 | 1 | 0 | 0 | +| - fs_phy_type | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 0 | 0 | 1 | +| - num_dev_ep | 7 | 6 | 6 | 3 | 5 | 5 | 5 | 5 | 8 | 5 | 8 | 5 | 8 | 0 | 6 | +| - num_host_ch | 7 | 13 | 7 | 7 | 11 | 11 | 11 | 11 | 15 | 11 | 15 | 11 | 15 | 0 | 13 | +| - period_channel_support | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 0 | 1 | +| - enable_dynamic_fifo | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 0 | 1 | +| - mul_cpu_int | 0 | 0 | 0 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 0 | 0 | 0 | +| - reserved21 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | +| - nperiod_tx_q_depth | 2 | 2 | 1 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 0 | 2 | +| - host_period_tx_q_depth | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 0 | 2 | +| - dev_token_q_depth | 8 | 8 | 8 | 8 | 8 | 8 | 8 | 8 | 8 | 8 | 8 | 8 | 8 | 0 | 8 | +| - otg_enable_ic_usb | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | +| ghwcfg3 | 0x0FF000E8 | 0x01F204E8 | 0x00C804B5 | 0x020001E8 | 0x03F403E8 | 0x0200D1E8 | 0x03F403E8 | 0x0200D1E8 | 0x03EED2E8 | 0x0200D1E8 | 0x03B8D2E8 | 0x0200D1E8 | 0x03B882E8 | 0x00000000 | 0x027A01E5 | +| - xfer_size_width | 8 | 8 | 5 | 8 | 8 | 8 | 8 | 8 | 8 | 8 | 8 | 8 | 8 | 0 | 5 | +| - packet_size_width | 6 | 6 | 3 | 6 | 6 | 6 | 6 | 6 | 6 | 6 | 6 | 6 | 6 | 0 | 6 | +| - otg_enable | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 0 | 1 | +| - i2c_enable | 0 | 0 | 0 | 1 | 1 | 1 | 1 | 1 | 0 | 1 | 0 | 1 | 0 | 0 | 1 | +| - vendor_ctrl_itf | 0 | 0 | 0 | 0 | 1 | 0 | 1 | 0 | 1 | 0 | 1 | 0 | 1 | 0 | 0 | +| - optional_feature_removed | 0 | 1 | 1 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | +| - synch_reset | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | +| - otg_adp_support | 0 | 0 | 0 | 0 | 0 | 1 | 0 | 1 | 1 | 1 | 1 | 1 | 0 | 0 | 0 | +| - otg_enable_hsic | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | +| - battery_charger_support | 0 | 0 | 0 | 0 | 0 | 1 | 0 | 1 | 1 | 1 | 1 | 1 | 0 | 0 | 0 | +| - lpm_mode | 0 | 0 | 0 | 0 | 0 | 1 | 0 | 1 | 1 | 1 | 1 | 1 | 1 | 0 | 0 | +| - total_fifo_size | 4080 | 498 | 200 | 512 | 1012 | 512 | 1012 | 512 | 1006 | 512 | 952 | 512 | 952 | 0 | 634 | +| ghwcfg4 | 0x1FF00020 | 0x1BF08030 | 0xD3F0A030 | 0x0FF08030 | 0x17F00030 | 0x17F08030 | 0x17F00030 | 0x17F08030 | 0x23F00030 | 0x17F08030 | 0xE3F00030 | 0x17F08030 | 0xE2103E30 | 0x00000000 | 0xDBF08030 | +| - num_dev_period_in_ep | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | +| - power_optimized | 0 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 0 | 1 | +| - ahb_freq_min | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 0 | 1 | +| - hibernation | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | +| - reserved7 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 4 | 0 | 0 | +| - service_interval_mode | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 1 | 0 | 0 | +| - ipg_isoc_en | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 1 | 0 | 0 | +| - acg_enable | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 1 | 0 | 0 | +| - reserved13 | 0 | 0 | 1 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 1 | 0 | 0 | +| - utmi_phy_data_width | 0 | 2 | 2 | 2 | 0 | 2 | 0 | 2 | 0 | 2 | 0 | 2 | 0 | 0 | 2 | +| - dev_ctrl_ep_num | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | +| - iddg_filter_enabled | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 0 | 1 | +| - vbus_valid_filter_enabled | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 0 | 0 | 1 | +| - a_valid_filter_enabled | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 0 | 0 | 1 | +| - b_valid_filter_enabled | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 0 | 0 | 1 | +| - dedicated_fifos | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 0 | 0 | 1 | +| - num_dev_in_eps | 15 | 13 | 9 | 7 | 11 | 11 | 11 | 11 | 1 | 11 | 1 | 11 | 1 | 0 | 13 | +| - dma_desc_enable | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 1 | 0 | 1 | 0 | 1 | 0 | 0 | +| - dma_dynamic | 0 | 0 | 1 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 1 | 0 | 1 | 0 | 1 | diff --git a/src/portable/synopsys/dwc2/dwc2_info.py b/src/portable/synopsys/dwc2/dwc2_info.py index 55bec3d23..6f3f195f0 100644 --- a/src/portable/synopsys/dwc2/dwc2_info.py +++ b/src/portable/synopsys/dwc2/dwc2_info.py @@ -3,24 +3,21 @@ import ctypes import pandas as pd # hex value for register: guid, gsnpsid, ghwcfg1, ghwcfg2, ghwcfg3, ghwcfg4 +# Note: FS is FullSpeed, HS is HighSpeed dwc2_reg_list = ['guid', 'gsnpsid', 'ghwcfg1', 'ghwcfg2', 'ghwcfg3', 'ghwcfg4'] dwc2_reg_value = { 'BCM2711 (Pi4)': [0x2708A000, 0x4F54280A, 0, 0x228DDD50, 0xFF000E8, 0x1FF00020], - 'EFM32GG FullSpeed': [0, 0x4F54330A, 0, 0x228F5910, 0x1F204E8, 0x1BF08030], - 'ESP32-S2': [0, 0x4F54400A, 0, 0x224DD930, 0xC804B5, 0xD3F0A030], - 'STM32F407 Fullspeed': [0x1200, 0x4F54281A, 0, 0x229DCD20, 0x20001E8, 0xFF08030], - 'STM32F407 Highspeed': [0x1100, 0x4F54281A, 0, 0x229ED590, 0x3F403E8, 0x17F00030], - 'STM32F411 Fullspeed': [0x1200, 0x4F54281A, 0, 0x229DCD20, 0x20001E8, 0xFF08030], - 'STM32F412 Fullspeed': [0x2000, 0x4F54320A, 0, 0x229ED520, 0x200D1E8, 0x17F08030], - 'STM32F429 Fullspeed': [0x1200, 0x4F54281A, 0, 0x229DCD20, 0x20001E8, 0xFF08030], - 'STM32F429 Highspeed': [0x1100, 0x4F54281A, 0, 0x229ED590, 0x3F403E8, 0x17F00030], - 'STM32F723 Fullspeed': [0x3000, 0x4F54330A, 0, 0x229ED520, 0x200D1E8, 0x17F08030], - 'STM32F723 HighSpeed': [0x3100, 0x4F54330A, 0, 0x229FE1D0, 0x3EED2E8, 0x23F00030], - 'STM32F767 Fullspeed': [0x2000, 0x4F54320A, 0, 0x229ED520, 0x200D1E8, 0x17F08030], - 'STM32H743 Highspeed': [0x2300, 0x4F54330A, 0, 0x229FE190, 0x3B8D2E8, 0xE3F00030], # both HS cores - 'STM32L476 Fullspeed': [0x2000, 0x4F54310A, 0, 0x229ED520, 0x200D1E8, 0x17F08030], - 'STM32U5A5 Highspeed': [0x00005000, 0x4F54411A, 0x00000000, 0x228FE052, 0x03B882E8, 0xE2103E30], - 'GD32VF103 Fullspeed': [0x1000, 0, 0, 0, 0, 0], + 'EFM32GG FS': [0, 0x4F54330A, 0, 0x228F5910, 0x1F204E8, 0x1BF08030], + 'ESP32-S2/S3': [0, 0x4F54400A, 0, 0x224DD930, 0xC804B5, 0xD3F0A030], + 'STM32F 407/411/429 FS': [0x1200, 0x4F54281A, 0, 0x229DCD20, 0x20001E8, 0xFF08030], + 'STM32F 407/429 HS': [0x1100, 0x4F54281A, 0, 0x229ED590, 0x3F403E8, 0x17F00030], + 'STM32F 412/767 FS': [0x2000, 0x4F54320A, 0, 0x229ED520, 0x200D1E8, 0x17F08030], + 'STM32F723 FS': [0x3000, 0x4F54330A, 0, 0x229ED520, 0x200D1E8, 0x17F08030], + 'STM32F723 HS': [0x3100, 0x4F54330A, 0, 0x229FE1D0, 0x3EED2E8, 0x23F00030], + 'STM32H743 HS': [0x2300, 0x4F54330A, 0, 0x229FE190, 0x3B8D2E8, 0xE3F00030], # both HS cores + 'STM32L476 FS': [0x2000, 0x4F54310A, 0, 0x229ED520, 0x200D1E8, 0x17F08030], + 'STM32U5A5 HS': [0x5000, 0x4F54411A, 0, 0x228FE052, 0x03B882E8, 0xE2103E30], + 'GD32VF103 FS': [0x1000, 0, 0, 0, 0, 0], 'XMC4500': [0xAEC000, 0x4F54292A, 0, 0x228F5930, 0x27A01E5, 0xDBF08030] } diff --git a/src/portable/synopsys/dwc2/dwc2_type.h b/src/portable/synopsys/dwc2/dwc2_type.h index c21bf9e94..97b9d1d8c 100644 --- a/src/portable/synopsys/dwc2/dwc2_type.h +++ b/src/portable/synopsys/dwc2/dwc2_type.h @@ -101,13 +101,15 @@ enum { }; enum { - GHWCFG2_ARCH_SLAVE_ONLY = 0, - GHWCFG2_ARCH_EXTERNAL_DMA, // 1 - GHWCFG2_ARCH_INTERNAL_DMA, // 2 + GHWCFG2_ARCH_SLAVE_ONLY = 0, + GHWCFG2_ARCH_EXTERNAL_DMA, // 1 + GHWCFG2_ARCH_INTERNAL_DMA, // 2 }; -typedef struct TU_ATTR_PACKED -{ +//-------------------------------------------------------------------- +// Register bitfield definitions +//-------------------------------------------------------------------- +typedef struct TU_ATTR_PACKED { uint32_t op_mode : 3; // 0: HNP and SRP | 1: SRP | 2: non-HNP, non-SRP uint32_t arch : 2; // 0: slave-only | 1: External DMA | 2: Internal DMA | 3: others uint32_t point2point : 1; // 0: support hub and split | 1: no hub, no split @@ -124,11 +126,9 @@ typedef struct TU_ATTR_PACKED uint32_t dev_token_q_depth : 5; // Device IN token sequence learning queue depth: 0-30 uint32_t otg_enable_ic_usb : 1; // IC_USB mode specified for mode of operation } dwc2_ghwcfg2_t; - TU_VERIFY_STATIC(sizeof(dwc2_ghwcfg2_t) == 4, "incorrect size"); -typedef struct TU_ATTR_PACKED -{ +typedef struct TU_ATTR_PACKED { uint32_t xfer_size_width : 4; // Transfer size counter in bits = 11 + n (max 19 bits) uint32_t packet_size_width : 3; // Packet size counter in bits = 4 + n (max 10 bits) uint32_t otg_enable : 1; // 1 is OTG capable @@ -142,11 +142,9 @@ typedef struct TU_ATTR_PACKED uint32_t lpm_mode : 1; // LPC mode uint32_t dfifo_depth : 16; // DFIFO depth - EP_LOC_CNT in terms of 32-bit words }dwc2_ghwcfg3_t; - TU_VERIFY_STATIC(sizeof(dwc2_ghwcfg3_t) == 4, "incorrect size"); -typedef struct TU_ATTR_PACKED -{ +typedef struct TU_ATTR_PACKED { uint32_t num_dev_period_in_ep : 4; // Number of Device Periodic IN Endpoints uint32_t power_optimized : 1; // Partial Power Down Enabled uint32_t ahb_freq_min : 1; // 1: minimum of AHB frequency is less than 60 MHz @@ -167,12 +165,110 @@ typedef struct TU_ATTR_PACKED uint32_t dma_desc_enable : 1; // scatter/gather DMA configuration uint32_t dma_dynamic : 1; // Dynamic scatter/gather DMA }dwc2_ghwcfg4_t; - TU_VERIFY_STATIC(sizeof(dwc2_ghwcfg4_t) == 4, "incorrect size"); +typedef struct TU_ATTR_PACKED { + uint32_t ses_req_scs : 1; // 0: Session request success + uint32_t ses_req : 1; // 1: Session request + uint32_t vbval_ov_en : 1; // 2: VBUS valid override enable + uint32_t vbval_ov_val : 1; // 3: VBUS valid override value + uint32_t aval_ov_en : 1; // 4: A-peripheral session valid override enable + uint32_t aval_ov_al : 1; // 5: A-peripheral session valid override value + uint32_t bval_ov_en : 1; // 6: B-peripheral session valid override enable + uint32_t bval_ov_val : 1; // 7: B-peripheral session valid override value + uint32_t hng_scs : 1; // 8: Host negotiation success + uint32_t hnp_rq : 1; // 9: HNP (host negotiation protocol) request + uint32_t host_set_hnp_en : 1; // 10: Host set HNP enable + uint32_t dev_hnp_en : 1; // 11: Device HNP enabled + uint32_t embedded_host_en : 1; // 12: Embedded host enable + uint32_t rsv13_14 : 2; // 13..14: Reserved + uint32_t dbnc_filter_bypass : 1; // 15: Debounce filter bypass + uint32_t cid_status : 1; // 16: Connector ID status + uint32_t dbnc_done : 1; // 17: Debounce done + uint32_t ases_valid : 1; // 18: A-session valid + uint32_t bses_valid : 1; // 19: B-session valid + uint32_t otg_ver : 1; // 20: OTG version 0: v1.3, 1: v2.0 + uint32_t current_mode : 1; // 21: Current mode of operation 0: device, 1: host + uint32_t mult_val_id_bc : 5; // 22..26: Multi-valued input pin ID battery charger + uint32_t chirp_en : 1; // 27: Chirp detection enable + uint32_t rsv28_30 : 3; // 28..30: Reserved + uint32_t test_mode_corr_eusb2 : 1; // 31: Test mode control for eUSB2 PHY +} dwc2_gotgctl_t; +TU_VERIFY_STATIC(sizeof(dwc2_gotgctl_t) == 4, "incorrect size"); + +typedef struct TU_ATTR_PACKED { + uint32_t rsv0_1 : 2; // 0..1 : Reserved + uint32_t ses_end_det : 1; // 2 : Session end detected + uint32_t rsv3_7 : 5; // 3..7 : Reserved + uint32_t srs_status_change : 1; // 8 : Session request success status change + uint32_t hns_status_change : 1; // 9 : Host negotiation success status change + uint32_t rsv10_16 : 7; // 10..16 : Reserved + uint32_t hng_det : 1; // 17 : Host negotiation detected + uint32_t adev_timeout_change : 1; // 18 : A-device timeout change + uint32_t dbnc_done : 1; // 19 : Debounce done + uint32_t mult_val_lp_change : 1; // 20 : Multi-valued input pin change + uint32_t rsv21_31 :11; // 21..31 : Reserved +} dwc2_gotgint_t; +TU_VERIFY_STATIC(sizeof(dwc2_gotgint_t) == 4, "incorrect size"); + +typedef struct TU_ATTR_PACKED { + uint32_t gintmask : 1; // 0: Global interrupt mask + uint32_t hbst_len : 4; // 1..4: Burst length/type + uint32_t dma_en : 1; // 5: DMA enable + uint32_t rsv6 : 1; // 6: Reserved + uint32_t nptxf_empty_lvl : 1; // 7: Non-periodic Tx FIFO empty level + uint32_t ptxf_empty_lvl : 1; // 8: Periodic Tx FIFO empty level + uint32_t rsv9_20 : 12; // 9..20: Reserved + uint32_t remote_mem_support : 1; // 21: Remote memory support + uint32_t notify_all_dma_write : 1; // 22: Notify all DMA writes + uint32_t ahb_single : 1; // 23: AHB single + uint32_t inv_desc_endian : 1; // 24: Inverse descriptor endian + uint32_t rsv25_31 : 7; // 25..31: Reserved +} dwc2_gahbcfg_t; +TU_VERIFY_STATIC(sizeof(dwc2_gahbcfg_t) == 4, "incorrect size"); + +typedef struct TU_ATTR_PACKED { + uint32_t timeout_cal : 3; /* 0..2: Timeout calibration. + The USB standard timeout value for high-speed operation is 736 to 816 (inclusive) bit times. The USB standard + timeout value for full- speed operation is 16 to 18 (inclusive) bit times. The application must program this field + based on the speed of enumeration. The number of bit times added per PHY clock are as follows: + - High-speed: PHY clock One 30-MHz = 16 bit times, One 60-MHz = 8 bit times + - Full-speed: PHY clock One 30-MHz = 0.4 bit times, One 60-MHz = 0.2 bit times, One 48-MHz = 0.25 bit times */ + uint32_t phy_if : 1; // 3: PHY interface. 0: 8 bits, 1: 16 bits + uint32_t ulpi_utmi_sel : 1; // 4: ULPI/UTMI select. 0: UTMI+, 1: ULPI + uint32_t fs_intf_sel : 1; // 5: Fullspeed serial interface select. 0: 6-pin, 1: 3-pin + uint32_t phy_sel : 1; // 6: HS/FS PHY selection. 0: HS UTMI+ or ULPI, 1: FS serial transceiver + uint32_t ddr_sel : 1; // 7 ULPI DDR select. 0: Single data rate 8-bit, 1: Double data rate 4-bit + uint32_t srp_capable : 1; // 8: SRP-capable + uint32_t hnp_capable : 1; // 9: HNP-capable + uint32_t turnaround_time : 4; // 10..13 Turnaround time. 9: 8-bit UTMI+, 5: 16-bit UTMI+ + uint32_t rsv14 : 1; // 14: Reserved + uint32_t phy_low_power_clk_sel : 1; /* 15: PHY low-power clock select either 480-MHz or 48-MHz (low-power) PHY mode. + In FS/LS modes, the PHY can usually operate on a 48-MHz clock to save power. This bit is valid only for UTMI+ PHYs. + - 0: 480 Mhz internal PLL: the UTMI interface operates at either 60 MHz (8 bit) or 30 MHz (16-bit) + - 1 48 Mhz external clock: the UTMI interface operates at 48 MHz in FS mode and at either 48 or 6 MHz in LS mode */ + uint32_t otg_i2c_sel : 1; // 16: OTG I2C interface select. 0: UTMI-FS, 1: I2C for OTG signals + uint32_t ulpi_fsls : 1; /* 17: ULPI FS/LS select. 0: ULPI, 1: ULPI FS/LS. + valid only when the FS serial transceiver is selected on the ULPI PHY. */ + uint32_t ulpi_auto_resume : 1; // 18: ULPI Auto-resume + uint32_t ulpi_clk_sus_m : 1; // 19: ULPI Clock SuspendM + uint32_t ulpi_ext_vbus_drv : 1; // 20: ULPI External VBUS Drive + uint32_t ulpi_int_vbus_indicator : 1; // 21: ULPI Internal VBUS Indicator + uint32_t term_sel_dl_pulse : 1; // 22: TermSel DLine pulsing + uint32_t indicator_complement : 1; // 23: Indicator complement + uint32_t indicator_pass_through : 1; // 24: Indicator pass through + uint32_t ulpi_if_protect_disable : 1; // 25: ULPI interface protect disable + uint32_t ic_usb_capable : 1; // 26: IC_USB Capable + uint32_t ic_usb_traf_ctl : 1; // 27: IC_USB Traffic Control + uint32_t tx_end_delay : 1; // 28: TX end delay + uint32_t force_host_mode : 1; // 29: Force host mode + uint32_t force_dev_mode : 1; // 30: Force device mode + uint32_t corrupt_tx_pkt : 1; // 31: Corrupt Tx packet. 0: normal, 1: debug +} dwc2_gusbcfg_t; +TU_VERIFY_STATIC(sizeof(dwc2_gusbcfg_t) == 4, "incorrect size"); + // Host Channel -typedef struct -{ +typedef struct { volatile uint32_t hcchar; // 500 + 20*ch Host Channel Characteristics volatile uint32_t hcsplt; // 504 + 20*ch Host Channel Split Control volatile uint32_t hcint; // 508 + 20*ch Host Channel Interrupt @@ -184,8 +280,7 @@ typedef struct } dwc2_channel_t; // Endpoint IN -typedef struct -{ +typedef struct { volatile uint32_t diepctl; // 900 + 20*ep Device IN Endpoint Control uint32_t reserved04; // 904 volatile uint32_t diepint; // 908 + 20*ep Device IN Endpoint Interrupt @@ -197,8 +292,7 @@ typedef struct } dwc2_epin_t; // Endpoint OUT -typedef struct -{ +typedef struct { volatile uint32_t doepctl; // B00 + 20*ep Device OUT Endpoint Control uint32_t reserved04; // B04 volatile uint32_t doepint; // B08 + 20*ep Device OUT Endpoint Interrupt @@ -208,8 +302,10 @@ typedef struct uint32_t reserved18[2]; // B18..B1C } dwc2_epout_t; -typedef struct -{ +//-------------------------------------------------------------------- +// CSR Register Map +//-------------------------------------------------------------------- +typedef struct { //------------- Core Global -------------// volatile uint32_t gotgctl; // 000 OTG Control and Status volatile uint32_t gotgint; // 004 OTG Interrupt diff --git a/test/hil/hil_test.py b/test/hil/hil_test.py index 2d14220c5..fc2e6c777 100644 --- a/test/hil/hil_test.py +++ b/test/hil/hil_test.py @@ -459,6 +459,8 @@ def main(): """ global verbose + duration = time.time() + parser = argparse.ArgumentParser() parser.add_argument('config_file', help='Configuration JSON file') parser.add_argument('-b', '--board', action='append', default=[], help='Boards to test, all if not specified') @@ -483,9 +485,10 @@ def main(): with Pool(processes=os.cpu_count()) as pool: err_count = sum(pool.map(test_board, config_boards)) + duration = time.time() - duration print() print("-" * 30) - print(f'Total failed: {err_count}') + print(f'Total failed: {err_count} in {duration:.1f}s') print("-" * 30) sys.exit(err_count) -- cgit v1.3.1 From d6c8719bcb1607e6b0c668f15655de483e15f02e Mon Sep 17 00:00:00 2001 From: hathach Date: Mon, 30 Sep 2024 23:16:53 +0700 Subject: temporarily update hil_test.py to have dual/host_info_to_device_cdc optional for pico/pico2 since it does not seem to be stable enough --- test/hil/hil_test.py | 13 +++++++++---- test/hil/tinyusb.json | 1 - 2 files changed, 9 insertions(+), 5 deletions(-) (limited to 'test/hil') diff --git a/test/hil/hil_test.py b/test/hil/hil_test.py index 2d14220c5..f152b1aa9 100644 --- a/test/hil/hil_test.py +++ b/test/hil/hil_test.py @@ -240,8 +240,13 @@ def test_dual_host_info_to_device_cdc(board): print(f'\r\n {l} ', end='') enum_dev_sn.append(f'{vid_pid_sn.group(1)}_{vid_pid_sn.group(2)}_{vid_pid_sn.group(3)}') - assert(set(declared_devs) == set(enum_dev_sn)), \ - f'Enumerated devices {enum_dev_sn} not match with declared {declared_devs}' + if set(declared_devs) != set(enum_dev_sn): + # for pico/pico2 make this test optional + failed_msg = f'Enumerated devices {enum_dev_sn} not match with declared {declared_devs}' + if 'raspberry_pi_pico' in board['name']: + print(f'\r\n {failed_msg} ', end='') + else: + assert False, failed_msg return 0 @@ -405,6 +410,8 @@ def test_board(board): if 'tests' in board: board_tests = board['tests'] + if 'dual_attached' in board_tests: + test_list += dual_tests if 'only' in board_tests: test_list = board_tests['only'] if 'skip' in board_tests: @@ -412,8 +419,6 @@ def test_board(board): if skip in test_list: test_list.remove(skip) print(f'{name:25} {skip:30} ... Skip') - if 'dual_attached' in board_tests: - test_list += dual_tests # board_test is added last to disable board's usb test_list.append('device/board_test') diff --git a/test/hil/tinyusb.json b/test/hil/tinyusb.json index fcd004c6d..066dc5876 100644 --- a/test/hil/tinyusb.json +++ b/test/hil/tinyusb.json @@ -59,7 +59,6 @@ "flasher_sn": "E6633861A3978538", "flasher_args": "-f interface/cmsis-dap.cfg -f target/rp2350.cfg -c \"adapter speed 5000\"", "tests": { - "skip": ["dual/host_info_to_device_cdc"], "dual_attached": [{"vid_pid": "1a86_55d4", "serial": "533D004242"}] } }, -- cgit v1.3.1 From 1b295de9adbe8eb42f1590ce6b478af5c23e5f8b Mon Sep 17 00:00:00 2001 From: hathach Date: Fri, 4 Oct 2024 15:01:03 +0700 Subject: add hil_ci_set_matrix.py, starting to support hil with additional build flags --- .github/workflows/build.yml | 6 ++-- .github/workflows/ci_set_matrix.py | 2 +- .github/workflows/hil_test.yml | 7 ++--- test/hil/hil_ci_set_matrix.py | 42 +++++++++++++++++++++++++ test/hil/hil_test.py | 64 +++++++++++++++++++++----------------- tools/build.py | 39 +++++++++++++++++------ 6 files changed, 113 insertions(+), 47 deletions(-) create mode 100644 test/hil/hil_ci_set_matrix.py (limited to 'test/hil') diff --git a/.github/workflows/build.yml b/.github/workflows/build.yml index 70bb3113f..8d5bcbc67 100644 --- a/.github/workflows/build.yml +++ b/.github/workflows/build.yml @@ -65,7 +65,7 @@ jobs: with: build-system: 'cmake' toolchain: ${{ matrix.toolchain }} - build-args: ${{ toJSON(fromJSON(needs.set-matrix.outputs.json)[matrix.toolchain].family) }} + build-args: ${{ toJSON(fromJSON(needs.set-matrix.outputs.json)[matrix.toolchain]) }} one-per-family: ${{ github.event_name == 'push' }} # --------------------------------------- @@ -89,7 +89,7 @@ jobs: with: build-system: 'make' toolchain: ${{ matrix.toolchain }} - build-args: ${{ toJSON(fromJSON(needs.set-matrix.outputs.json)[matrix.toolchain].family) }} + build-args: ${{ toJSON(fromJSON(needs.set-matrix.outputs.json)[matrix.toolchain]) }} one-per-family: true # --------------------------------------- @@ -117,7 +117,7 @@ jobs: needs: set-matrix runs-on: [self-hosted, Linux, X64, hifiphile] env: - BUILD_ARGS: ${{ join(fromJSON(needs.set-matrix.outputs.json)['arm-iar'].family, ' ') }} + BUILD_ARGS: ${{ join(fromJSON(needs.set-matrix.outputs.json)['arm-iar'], ' ') }} steps: - name: Clean workspace run: | diff --git a/.github/workflows/ci_set_matrix.py b/.github/workflows/ci_set_matrix.py index 8974037e4..7cc749d48 100644 --- a/.github/workflows/ci_set_matrix.py +++ b/.github/workflows/ci_set_matrix.py @@ -62,7 +62,7 @@ def set_matrix_json(): hfp_boards = [f"-b{board['name']}" for board in hfp_data['boards']] filtered_families = filtered_families + hfp_boards - matrix[toolchain] = {"family": filtered_families} + matrix[toolchain] = filtered_families print(json.dumps(matrix)) diff --git a/.github/workflows/hil_test.yml b/.github/workflows/hil_test.yml index 6ece44922..7c94fdf6a 100644 --- a/.github/workflows/hil_test.yml +++ b/.github/workflows/hil_test.yml @@ -32,10 +32,7 @@ jobs: - name: Generate matrix json id: set-matrix-json run: | - MATRIX_ARMGCC=$(jq -c '{ "arm-gcc": { "family": [.boards[] | select(.flasher != "esptool" and .flasher != "openocd_wch") | "-b \(.name)"] } }' "${{ env.HIL_JSON }}") - MATRIX_ESP=$(jq -c '{ "esp-idf": { "family": [.boards[] | select(.flasher == "esptool") | "-b \(.name)"] } }' "${{ env.HIL_JSON }}") - MATRIX_RISCV=$(jq -c '{ "riscv-gcc": { "family": [.boards[] | select(.flasher == "openocd_wch") | "-b \(.name)"] } }' "${{ env.HIL_JSON }}") - MATRIX_JSON=$(jq -nc --argjson arm "$MATRIX_ARMGCC" --argjson esp "$MATRIX_ESP" --argjson riscv "$MATRIX_RISCV" '$arm + $esp + $riscv') + MATRIX_JSON=$(python test/hil/hil_ci_set_matrix.py) echo "matrix=$MATRIX_JSON" echo "matrix=$MATRIX_JSON" >> $GITHUB_OUTPUT @@ -55,7 +52,7 @@ jobs: with: build-system: 'cmake' toolchain: ${{ matrix.toolchain }} - build-args: ${{ toJSON(fromJSON(needs.set-matrix.outputs.json)[matrix.toolchain].family) }} + build-args: ${{ toJSON(fromJSON(needs.set-matrix.outputs.json)[matrix.toolchain]) }} one-per-family: true upload-artifacts: true diff --git a/test/hil/hil_ci_set_matrix.py b/test/hil/hil_ci_set_matrix.py new file mode 100644 index 000000000..56952eab3 --- /dev/null +++ b/test/hil/hil_ci_set_matrix.py @@ -0,0 +1,42 @@ +import argparse +import json +import os + +def main(): + parser = argparse.ArgumentParser() + parser.add_argument('config_file', help='Configuration JSON file') + args = parser.parse_args() + + config_file = args.config_file + + # if config file is not found, try to find it in the same directory as this script + if not os.path.exists(config_file): + config_file = os.path.join(os.path.dirname(__file__), config_file) + with open(config_file) as f: + config = json.load(f) + + matrix = { + 'arm-gcc': [], + 'esp-idf': [] + } + for board in config['boards']: + name = board['name'] + if board['flasher'] == 'esptool': + toolchain = 'esp-idf' + else: + toolchain = 'arm-gcc' + + if 'build_flags_on' in board: + for f in board['build_flags_on']: + if f == '': + matrix[toolchain].append(f'-b {name}') + else: + matrix[toolchain].append(f'-b {name}-{f.replace(" ", "_")}') + else: + matrix[toolchain].append(f'-b {name}') + + print(json.dumps(matrix)) + + +if __name__ == '__main__': + main() diff --git a/test/hil/hil_test.py b/test/hil/hil_test.py index cb885aeb5..eaa9dd3bd 100644 --- a/test/hil/hil_test.py +++ b/test/hil/hil_test.py @@ -424,37 +424,45 @@ def test_board(board): test_list.append('device/board_test') err_count = 0 - for test in test_list: - fw_dir = f'cmake-build/cmake-build-{name}/{test}' - if not os.path.exists(fw_dir): - fw_dir = f'examples/cmake-build-{name}/{test}' - fw_name = f'{fw_dir}/{os.path.basename(test)}' - print(f'{name:25} {test:30} ... ', end='') - - if not os.path.exists(fw_dir): - print('Skip (no binary)') - continue - - # flash firmware. It may fail randomly, retry a few times - for i in range(3): - ret = globals()[f'flash_{flasher}'](board, fw_name) + flags_opt_list = [""] + if 'build_flags_on' in board: + flags_opt_list = board['build_flags_on'] + + for flags_opt in flags_opt_list: + flags_opt_str = "" + if flags_opt != "": + flags_opt_str = '-' + flags_opt.replace(' ', '-') + for test in test_list: + fw_dir = f'cmake-build/cmake-build-{name}{flags_opt_str}/{test}' + if not os.path.exists(fw_dir): + fw_dir = f'examples/cmake-build-{name}{flags_opt_str}/{test}' + fw_name = f'{fw_dir}/{os.path.basename(test)}' + print(f'{name+flags_opt_str:40} {test:30} ... ', end='') + + if not os.path.exists(fw_dir): + print('Skip (no binary)') + continue + + # flash firmware. It may fail randomly, retry a few times + for i in range(3): + ret = globals()[f'flash_{flasher}'](board, fw_name) + if ret.returncode == 0: + break + else: + print(f'Flashing failed, retry {i+1}') + time.sleep(1) + if ret.returncode == 0: - break + try: + ret = globals()[f'test_{test.replace("/", "_")}'](board) + print('OK') + except Exception as e: + err_count += 1 + print(STATUS_FAILED) + print(f' {e}') else: - print(f'Flashing failed, retry {i+1}') - time.sleep(1) - - if ret.returncode == 0: - try: - ret = globals()[f'test_{test.replace("/", "_")}'](board) - print('OK') - except Exception as e: err_count += 1 - print(STATUS_FAILED) - print(f' {e}') - else: - err_count += 1 - print(f'Flash {STATUS_FAILED}') + print(f'Flash {STATUS_FAILED}') return err_count diff --git a/tools/build.py b/tools/build.py index 44ac251de..3a771ed6b 100644 --- a/tools/build.py +++ b/tools/build.py @@ -21,6 +21,7 @@ build_format = '| {:30} | {:40} | {:16} | {:5} |' build_separator = '-' * 95 build_status = [STATUS_OK, STATUS_FAILED, STATUS_SKIPPED] +verbose = False # ----------------------------- # Helper @@ -38,6 +39,9 @@ def run_cmd(cmd): else: print(title) print(r.stdout.decode("utf-8")) + elif verbose: + print(cmd) + print(r.stdout.decode("utf-8")) return r @@ -75,10 +79,17 @@ def print_build_result(board, example, status, duration): # ----------------------------- # CMake # ----------------------------- -def cmake_board(board, toolchain): +def cmake_board(board, toolchain, build_flags_on): ret = [0, 0, 0] start_time = time.monotonic() - build_dir = f"cmake-build/cmake-build-{board}" + + build_dir = f'cmake-build/cmake-build-{board}' + build_flags = '' + if len(build_flags_on) > 0: + build_flags = ' '.join(f'-D{flag}=1' for flag in build_flags_on) + build_flags = f'-DCFLAGS_CLI="{build_flags}"' + build_dir += '-' + '-'.join(build_flags_on) + family = find_family(board) if family == 'espressif': # for espressif, we have to build example individually @@ -87,12 +98,14 @@ def cmake_board(board, toolchain): if build_utils.skip_example(example, board): ret[2] += 1 else: - rcmd = run_cmd(f'cmake examples/{example} -B {build_dir}/{example} -G "Ninja" -DBOARD={board}') + rcmd = run_cmd(f'cmake examples/{example} -B {build_dir}/{example} -G "Ninja" ' + f'-DBOARD={board} {build_flags}') if rcmd.returncode == 0: rcmd = run_cmd(f'cmake --build {build_dir}/{example}') ret[0 if rcmd.returncode == 0 else 1] += 1 else: - rcmd = run_cmd(f'cmake examples -B {build_dir} -G "Ninja" -DBOARD={board} -DCMAKE_BUILD_TYPE=MinSizeRel -DTOOLCHAIN={toolchain}') + rcmd = run_cmd(f'cmake examples -B {build_dir} -G "Ninja" -DBOARD={board} -DCMAKE_BUILD_TYPE=MinSizeRel ' + f'-DTOOLCHAIN={toolchain} {build_flags}') if rcmd.returncode == 0: rcmd = run_cmd(f"cmake --build {build_dir}") ret[0 if rcmd.returncode == 0 else 1] += 1 @@ -144,12 +157,12 @@ def make_board(board, toolchain): # ----------------------------- # Build Family # ----------------------------- -def build_boards_list(boards, toolchain, build_system): +def build_boards_list(boards, toolchain, build_system, build_flags_on): ret = [0, 0, 0] for b in boards: r = [0, 0, 0] if build_system == 'cmake': - r = cmake_board(b, toolchain) + r = cmake_board(b, toolchain, build_flags_on) elif build_system == 'make': r = make_board(b, toolchain) ret[0] += r[0] @@ -158,7 +171,7 @@ def build_boards_list(boards, toolchain, build_system): return ret -def build_family(family, toolchain, build_system, one_per_family, boards): +def build_family(family, toolchain, build_system, build_flags_on, one_per_family, boards): all_boards = [] for entry in os.scandir(f"hw/bsp/{family}/boards"): if entry.is_dir() and entry.name != 'pico_sdk': @@ -174,7 +187,7 @@ def build_family(family, toolchain, build_system, one_per_family, boards): return ret all_boards = [random.choice(all_boards)] - ret = build_boards_list(all_boards, toolchain, build_system) + ret = build_boards_list(all_boards, toolchain, build_system, build_flags_on) return ret @@ -182,19 +195,25 @@ def build_family(family, toolchain, build_system, one_per_family, boards): # Main # ----------------------------- def main(): + global verbose + parser = argparse.ArgumentParser() parser.add_argument('families', nargs='*', default=[], help='Families to build') parser.add_argument('-b', '--board', action='append', default=[], help='Boards to build') parser.add_argument('-t', '--toolchain', default='gcc', help='Toolchain to use, default is gcc') parser.add_argument('-s', '--build-system', default='cmake', help='Build system to use, default is cmake') + parser.add_argument('-f1', '--build-flags-on', action='append', default=[], help='Build flag to pass to build system') parser.add_argument('-1', '--one-per-family', action='store_true', default=False, help='Build only one random board inside a family') + parser.add_argument('-v', '--verbose', action='store_true', help='Verbose output') args = parser.parse_args() families = args.families boards = args.board toolchain = args.toolchain build_system = args.build_system + build_flags_on = args.build_flags_on one_per_family = args.one_per_family + verbose = args.verbose if len(families) == 0 and len(boards) == 0: print("Please specify families or board to build") @@ -217,13 +236,13 @@ def main(): # succeeded, failed, skipped for f in all_families: - r = build_family(f, toolchain, build_system, one_per_family, boards) + r = build_family(f, toolchain, build_system, build_flags_on, one_per_family, boards) result[0] += r[0] result[1] += r[1] result[2] += r[2] # build boards - r = build_boards_list(boards, toolchain, build_system) + r = build_boards_list(boards, toolchain, build_system, build_flags_on) result[0] += r[0] result[1] += r[1] result[2] += r[2] -- cgit v1.3.1 From 072a80d088c5c74a97b9ac525c6c7f7c53627ccb Mon Sep 17 00:00:00 2001 From: hathach Date: Fri, 4 Oct 2024 16:02:46 +0700 Subject: hil test both slave and dma for dwc2 esp32s3 --- .github/workflows/hil_test.yml | 2 +- test/hil/hil_ci_set_matrix.py | 3 ++- test/hil/tinyusb.json | 1 + 3 files changed, 4 insertions(+), 2 deletions(-) (limited to 'test/hil') diff --git a/.github/workflows/hil_test.yml b/.github/workflows/hil_test.yml index 579e935ac..d5f4e4fdd 100644 --- a/.github/workflows/hil_test.yml +++ b/.github/workflows/hil_test.yml @@ -58,7 +58,7 @@ jobs: # --------------------------------------- # Hardware in the loop (HIL) - # self-hosted running on an VM. For attached hardware checkout test/hil/tinyusb.json + # self-hosted running on an VM. For attached hardware checkout HIL_JSON # --------------------------------------- hil-tinyusb: if: github.repository_owner == 'hathach' diff --git a/test/hil/hil_ci_set_matrix.py b/test/hil/hil_ci_set_matrix.py index 56952eab3..d1329f035 100644 --- a/test/hil/hil_ci_set_matrix.py +++ b/test/hil/hil_ci_set_matrix.py @@ -2,6 +2,7 @@ import argparse import json import os + def main(): parser = argparse.ArgumentParser() parser.add_argument('config_file', help='Configuration JSON file') @@ -31,7 +32,7 @@ def main(): if f == '': matrix[toolchain].append(f'-b {name}') else: - matrix[toolchain].append(f'-b {name}-{f.replace(" ", "_")}') + matrix[toolchain].append(f'-b {name} -f1 {f.replace(" ", " -f1 ")}') else: matrix[toolchain].append(f'-b {name}') diff --git a/test/hil/tinyusb.json b/test/hil/tinyusb.json index 066dc5876..7627e7482 100644 --- a/test/hil/tinyusb.json +++ b/test/hil/tinyusb.json @@ -79,6 +79,7 @@ { "name": "espressif_s3_devkitm", "uid": "84F703C084E4", + "build_flags_on": ["", "CFG_TUD_DWC2_DMA"], "tests": { "only": ["device/cdc_msc_freertos", "device/hid_composite_freertos"] }, -- cgit v1.3.1 From 7cdab1c94b2a218928691dbca8cb9290bb31ecc9 Mon Sep 17 00:00:00 2001 From: hathach Date: Fri, 4 Oct 2024 16:33:58 +0700 Subject: enable dma hil test with hfp.json --- test/hil/hfp.json | 1 + test/hil/hil_ci_set_matrix.py | 4 ++-- test/hil/tinyusb.json | 4 +++- 3 files changed, 6 insertions(+), 3 deletions(-) (limited to 'test/hil') diff --git a/test/hil/hfp.json b/test/hil/hfp.json index e79a3cfc9..386d9816b 100644 --- a/test/hil/hfp.json +++ b/test/hil/hfp.json @@ -10,6 +10,7 @@ { "name": "stm32f746disco", "uid": "210041000C51343237303334", + "build_flags_on": ["", "CFG_TUD_DWC2_DMA"], "flasher": "jlink", "flasher_sn": "770935966", "flasher_args": "-device STM32F746NG" diff --git a/test/hil/hil_ci_set_matrix.py b/test/hil/hil_ci_set_matrix.py index d1329f035..192174e16 100644 --- a/test/hil/hil_ci_set_matrix.py +++ b/test/hil/hil_ci_set_matrix.py @@ -27,8 +27,8 @@ def main(): else: toolchain = 'arm-gcc' - if 'build_flags_on' in board: - for f in board['build_flags_on']: + if 'build' in board and 'flags_on' in board['build']: + for f in board['build']['flags_on']: if f == '': matrix[toolchain].append(f'-b {name}') else: diff --git a/test/hil/tinyusb.json b/test/hil/tinyusb.json index 7627e7482..1eaa08207 100644 --- a/test/hil/tinyusb.json +++ b/test/hil/tinyusb.json @@ -79,7 +79,9 @@ { "name": "espressif_s3_devkitm", "uid": "84F703C084E4", - "build_flags_on": ["", "CFG_TUD_DWC2_DMA"], + "build" : { + "flags_on": ["", "CFG_TUD_DWC2_DMA"] + }, "tests": { "only": ["device/cdc_msc_freertos", "device/hid_composite_freertos"] }, -- cgit v1.3.1 From 790a10728712aa0979185f4df722a471b799eada Mon Sep 17 00:00:00 2001 From: hathach Date: Fri, 4 Oct 2024 17:05:45 +0700 Subject: revert hfp dma for now, due to ci build matrix --- test/hil/hfp.json | 1 - 1 file changed, 1 deletion(-) (limited to 'test/hil') diff --git a/test/hil/hfp.json b/test/hil/hfp.json index 386d9816b..e79a3cfc9 100644 --- a/test/hil/hfp.json +++ b/test/hil/hfp.json @@ -10,7 +10,6 @@ { "name": "stm32f746disco", "uid": "210041000C51343237303334", - "build_flags_on": ["", "CFG_TUD_DWC2_DMA"], "flasher": "jlink", "flasher_sn": "770935966", "flasher_args": "-device STM32F746NG" -- cgit v1.3.1 From 31c123aa32f643c18ca14ff9e348e4c2d66e3963 Mon Sep 17 00:00:00 2001 From: hathach Date: Fri, 4 Oct 2024 17:38:57 +0700 Subject: update new json change --- .github/workflows/hil_test.yml | 4 +++- test/hil/hil_test.py | 22 +++++++++++----------- 2 files changed, 14 insertions(+), 12 deletions(-) (limited to 'test/hil') diff --git a/.github/workflows/hil_test.yml b/.github/workflows/hil_test.yml index d5f4e4fdd..c6e7f33b0 100644 --- a/.github/workflows/hil_test.yml +++ b/.github/workflows/hil_test.yml @@ -83,4 +83,6 @@ jobs: merge-multiple: true - name: Test on actual hardware - run: python3 test/hil/hil_test.py ${{ env.HIL_JSON }} + run: | + ls cmake-build/ + python3 test/hil/hil_test.py ${{ env.HIL_JSON }} diff --git a/test/hil/hil_test.py b/test/hil/hil_test.py index eaa9dd3bd..50f72b30f 100644 --- a/test/hil/hil_test.py +++ b/test/hil/hil_test.py @@ -424,20 +424,20 @@ def test_board(board): test_list.append('device/board_test') err_count = 0 - flags_opt_list = [""] - if 'build_flags_on' in board: - flags_opt_list = board['build_flags_on'] - - for flags_opt in flags_opt_list: - flags_opt_str = "" - if flags_opt != "": - flags_opt_str = '-' + flags_opt.replace(' ', '-') + flags_on_list = [""] + if 'build' in board and 'flags_on' in board['build']: + flags_on_list = board['build']['flags_on'] + + for f1 in flags_on_list: + f1_str = "" + if f1 != "": + f1_str = '-' + f1.replace(' ', '-') for test in test_list: - fw_dir = f'cmake-build/cmake-build-{name}{flags_opt_str}/{test}' + fw_dir = f'cmake-build/cmake-build-{name}{f1_str}/{test}' if not os.path.exists(fw_dir): - fw_dir = f'examples/cmake-build-{name}{flags_opt_str}/{test}' + fw_dir = f'examples/cmake-build-{name}{f1_str}/{test}' fw_name = f'{fw_dir}/{os.path.basename(test)}' - print(f'{name+flags_opt_str:40} {test:30} ... ', end='') + print(f'{name+f1_str:40} {test:30} ... ', end='') if not os.path.exists(fw_dir): print('Skip (no binary)') -- cgit v1.3.1 From b2a98eadabf3b48f3d9316b32444f0b9cfbc2d1f Mon Sep 17 00:00:00 2001 From: hathach Date: Fri, 4 Oct 2024 22:21:08 +0700 Subject: add stm32f769disco to hil pool --- src/portable/synopsys/dwc2/dcd_dwc2.c | 2 +- test/hil/tinyusb.json | 36 ++++++++++++++++++++++------------- 2 files changed, 24 insertions(+), 14 deletions(-) (limited to 'test/hil') diff --git a/src/portable/synopsys/dwc2/dcd_dwc2.c b/src/portable/synopsys/dwc2/dcd_dwc2.c index 4fa869241..210ce1bba 100644 --- a/src/portable/synopsys/dwc2/dcd_dwc2.c +++ b/src/portable/synopsys/dwc2/dcd_dwc2.c @@ -637,7 +637,7 @@ static void phy_hs_init(dwc2_regs_t* dwc2) { static bool check_dwc2(dwc2_regs_t* dwc2) { #if CFG_TUSB_DEBUG >= DWC2_DEBUG // print guid, gsnpsid, ghwcfg1, ghwcfg2, ghwcfg3, ghwcfg4 - // Run 'dwc2_info.py render-md' and check dwc2_info.md for bit-field value and comparison with other ports + // Run 'python dwc2_info.py' and check dwc2_info.md for bit-field value and comparison with other ports volatile uint32_t const* p = (volatile uint32_t const*) &dwc2->guid; TU_LOG1("guid, gsnpsid, ghwcfg1, ghwcfg2, ghwcfg3, ghwcfg4\r\n"); for (size_t i = 0; i < 5; i++) { diff --git a/test/hil/tinyusb.json b/test/hil/tinyusb.json index 1eaa08207..2358c3c4f 100644 --- a/test/hil/tinyusb.json +++ b/test/hil/tinyusb.json @@ -1,5 +1,18 @@ { "boards": [ + { + "name": "espressif_s3_devkitm", + "uid": "84F703C084E4", + "build" : { + "flags_on": ["", "CFG_TUD_DWC2_DMA"] + }, + "tests": { + "only": ["device/cdc_msc_freertos", "device/hid_composite_freertos"] + }, + "flasher": "esptool", + "flasher_sn": "3ea619acd1cdeb11a0a0b806e93fd3f1", + "flasher_args": "-b 1500000" + }, { "name": "feather_nrf52840_express", "uid": "1F0479CD0F764471", @@ -69,25 +82,22 @@ "flasher_sn": "779541626", "flasher_args": "-device stm32f072rb" }, + { + "name": "stm32f769disco", + "uid": "21002F000F51363531383437", + "build" : { + "flags_on": ["", "CFG_TUD_DWC2_DMA"] + }, + "flasher": "jlink", + "flasher_sn": "000778170924", + "flasher_args": "-device stm32f769ni" + }, { "name": "stm32g0b1nucleo", "uid": "4D0038000450434E37343120", "flasher": "openocd", "flasher_sn": "066FFF495087534867063844", "flasher_args": "-f interface/stlink.cfg -f target/stm32g0x.cfg" - }, - { - "name": "espressif_s3_devkitm", - "uid": "84F703C084E4", - "build" : { - "flags_on": ["", "CFG_TUD_DWC2_DMA"] - }, - "tests": { - "only": ["device/cdc_msc_freertos", "device/hid_composite_freertos"] - }, - "flasher": "esptool", - "flasher_sn": "3ea619acd1cdeb11a0a0b806e93fd3f1", - "flasher_args": "-b 921600" } ], "boards-skip": [ -- cgit v1.3.1 From 07c14f30a6d6cfb1758e3496c3ea73275ae4a062 Mon Sep 17 00:00:00 2001 From: hathach Date: Tue, 8 Oct 2024 12:36:45 +0700 Subject: add f407disco to hil pool --- hw/bsp/stm32h7/boards/stm32h750_weact/board.cmake | 16 ++ hw/bsp/stm32h7/boards/stm32h750_weact/board.h | 132 ++++++++++++++++ hw/bsp/stm32h7/boards/stm32h750_weact/board.mk | 21 +++ .../stm32h750_weact/stm32h750xx_flash_CM7.ld | 170 +++++++++++++++++++++ hw/bsp/stm32h7/boards/stm32h750bdk/board.cmake | 2 +- hw/bsp/stm32h7/boards/stm32h750bdk/board.mk | 2 +- hw/bsp/stm32h7/family.c | 12 +- src/portable/synopsys/dwc2/dwc2_info.md | 116 +++++++------- src/portable/synopsys/dwc2/dwc2_info.py | 23 +-- test/hil/hil_test.py | 2 +- test/hil/tinyusb.json | 24 ++- 11 files changed, 438 insertions(+), 82 deletions(-) create mode 100644 hw/bsp/stm32h7/boards/stm32h750_weact/board.cmake create mode 100644 hw/bsp/stm32h7/boards/stm32h750_weact/board.h create mode 100644 hw/bsp/stm32h7/boards/stm32h750_weact/board.mk create mode 100644 hw/bsp/stm32h7/boards/stm32h750_weact/stm32h750xx_flash_CM7.ld (limited to 'test/hil') diff --git a/hw/bsp/stm32h7/boards/stm32h750_weact/board.cmake b/hw/bsp/stm32h7/boards/stm32h750_weact/board.cmake new file mode 100644 index 000000000..6303ca462 --- /dev/null +++ b/hw/bsp/stm32h7/boards/stm32h750_weact/board.cmake @@ -0,0 +1,16 @@ +set(MCU_VARIANT stm32h750xx) +set(JLINK_DEVICE stm32h750vb) + +set(LD_FILE_GNU ${CMAKE_CURRENT_LIST_DIR}/${MCU_VARIANT}_flash_CM7.ld) +set(LD_FILE_IAR ${ST_CMSIS}/Source/Templates/iar/linker/${MCU_VARIANT}_flash.icf) + +function(update_board TARGET) + target_compile_definitions(${TARGET} PUBLIC + STM32H750xx + HSE_VALUE=25000000 + CORE_CM7 + # default to PORT 0 + BOARD_TUD_RHPORT=0 + BOARD_TUD_MAX_SPEED=OPT_MODE_FULL_SPEED + ) +endfunction() diff --git a/hw/bsp/stm32h7/boards/stm32h750_weact/board.h b/hw/bsp/stm32h7/boards/stm32h750_weact/board.h new file mode 100644 index 000000000..d117637a5 --- /dev/null +++ b/hw/bsp/stm32h7/boards/stm32h750_weact/board.h @@ -0,0 +1,132 @@ +/* + * The MIT License (MIT) + * + * Copyright (c) 2021, Ha Thach (tinyusb.org) + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + * This file is part of the TinyUSB stack. + */ + +#ifndef BOARD_H_ +#define BOARD_H_ + +#ifdef __cplusplus + extern "C" { +#endif + +#define LED_PORT GPIOE +#define LED_PIN GPIO_PIN_3 +#define LED_STATE_ON 1 + +// Blue push-button +#define BUTTON_PORT GPIOC +#define BUTTON_PIN GPIO_PIN_13 +#define BUTTON_STATE_ACTIVE 1 + +// UART +//#define UART_DEV USART3 +//#define UART_CLK_EN __HAL_RCC_USART3_CLK_ENABLE +//#define UART_GPIO_PORT GPIOB +//#define UART_GPIO_AF GPIO_AF7_USART3 +//#define UART_TX_PIN GPIO_PIN_10 +//#define UART_RX_PIN GPIO_PIN_11 + +// VBUS Sense detection +#define OTG_FS_VBUS_SENSE 1 +#define OTG_HS_VBUS_SENSE 0 + +//--------------------------------------------------------------------+ +// RCC Clock +//--------------------------------------------------------------------+ +static inline void SystemClock_Config(void) { + RCC_OscInitTypeDef RCC_OscInitStruct = {0}; + RCC_ClkInitTypeDef RCC_ClkInitStruct = {0}; + RCC_PeriphCLKInitTypeDef PeriphClkInitStruct = {0}; + + // Supply configuration update enable + HAL_PWREx_ConfigSupply(PWR_LDO_SUPPLY); + + // Configure the main internal regulator output voltage + __HAL_PWR_VOLTAGESCALING_CONFIG(PWR_REGULATOR_VOLTAGE_SCALE2); + while(!__HAL_PWR_GET_FLAG(PWR_FLAG_VOSRDY)) {} + + // Configure the PLL clock source + __HAL_RCC_PLL_PLLSOURCE_CONFIG(RCC_PLLSOURCE_HSE); + + // Initializes the CPU, AHB and APB busses clocks + RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_LSI|RCC_OSCILLATORTYPE_HSE; + RCC_OscInitStruct.HSEState = RCC_HSE_ON; + RCC_OscInitStruct.LSIState = RCC_LSI_ON; + RCC_OscInitStruct.PLL.PLLState = RCC_PLL_ON; + RCC_OscInitStruct.PLL.PLLSource = RCC_PLLSOURCE_HSE; + RCC_OscInitStruct.PLL.PLLM = 5; + RCC_OscInitStruct.PLL.PLLN = 96; + RCC_OscInitStruct.PLL.PLLP = 2; + RCC_OscInitStruct.PLL.PLLQ = 2; + RCC_OscInitStruct.PLL.PLLR = 2; + RCC_OscInitStruct.PLL.PLLRGE = RCC_PLL1VCIRANGE_2; + RCC_OscInitStruct.PLL.PLLVCOSEL = RCC_PLL1VCOWIDE; + RCC_OscInitStruct.PLL.PLLFRACN = 0; + HAL_RCC_OscConfig(&RCC_OscInitStruct); + + // Initializes the CPU, AHB and APB busses clocks + RCC_ClkInitStruct.ClockType = RCC_CLOCKTYPE_HCLK|RCC_CLOCKTYPE_SYSCLK + |RCC_CLOCKTYPE_PCLK1|RCC_CLOCKTYPE_PCLK2 + |RCC_CLOCKTYPE_D3PCLK1|RCC_CLOCKTYPE_D1PCLK1; + RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_PLLCLK; + RCC_ClkInitStruct.SYSCLKDivider = RCC_SYSCLK_DIV1; + RCC_ClkInitStruct.AHBCLKDivider = RCC_HCLK_DIV2; + RCC_ClkInitStruct.APB3CLKDivider = RCC_APB3_DIV1; + RCC_ClkInitStruct.APB1CLKDivider = RCC_APB1_DIV1; + RCC_ClkInitStruct.APB2CLKDivider = RCC_APB2_DIV1; + RCC_ClkInitStruct.APB4CLKDivider = RCC_APB4_DIV1; + HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_1); + + PeriphClkInitStruct.PeriphClockSelection = RCC_PERIPHCLK_RTC|RCC_PERIPHCLK_SPI4 + |RCC_PERIPHCLK_SPI1|RCC_PERIPHCLK_USB + |RCC_PERIPHCLK_QSPI; + PeriphClkInitStruct.PLL3.PLL3M = 10; + PeriphClkInitStruct.PLL3.PLL3N = 96; + PeriphClkInitStruct.PLL3.PLL3P = 5; + PeriphClkInitStruct.PLL3.PLL3Q = 5; + PeriphClkInitStruct.PLL3.PLL3R = 2; + PeriphClkInitStruct.PLL3.PLL3RGE = RCC_PLL3VCIRANGE_1; + PeriphClkInitStruct.PLL3.PLL3VCOSEL = RCC_PLL3VCOWIDE; + PeriphClkInitStruct.PLL3.PLL3FRACN = 0; + PeriphClkInitStruct.QspiClockSelection = RCC_QSPICLKSOURCE_D1HCLK; + PeriphClkInitStruct.Spi123ClockSelection = RCC_SPI123CLKSOURCE_PLL; + PeriphClkInitStruct.Spi45ClockSelection = RCC_SPI45CLKSOURCE_D2PCLK1; + PeriphClkInitStruct.UsbClockSelection = RCC_USBCLKSOURCE_PLL3; + PeriphClkInitStruct.RTCClockSelection = RCC_RTCCLKSOURCE_LSI; + HAL_RCCEx_PeriphCLKConfig(&PeriphClkInitStruct); + + // Enable USB Voltage detector + HAL_PWREx_EnableUSBVoltageDetector(); +} + +static inline void board_stm32h7_post_init(void) { + // For this board does nothing +} + +#ifdef __cplusplus + } +#endif + +#endif diff --git a/hw/bsp/stm32h7/boards/stm32h750_weact/board.mk b/hw/bsp/stm32h7/boards/stm32h750_weact/board.mk new file mode 100644 index 000000000..a50172cb0 --- /dev/null +++ b/hw/bsp/stm32h7/boards/stm32h750_weact/board.mk @@ -0,0 +1,21 @@ +# STM32H745I-DISCO uses OTG_FS +# FIXME: Reset enumerates, un/replug USB plug does not enumerate + +CFLAGS += -DSTM32H750xx -DCORE_CM7 -DHSE_VALUE=25000000 + +# Default is FulSpeed port +PORT ?= 0 + +# GCC +SRC_S_GCC += $(ST_CMSIS)/Source/Templates/gcc/startup_stm32h750xx.s +LD_FILE_GCC = $(BOARD_PATH)/stm32h750xx_flash_CM7.ld + +# IAR +SRC_S_IAR += $(ST_CMSIS)/Source/Templates/iar/startup_stm32h750xx.s +LD_FILE_IAR = $(ST_CMSIS)/Source/Templates/iar/linker/stm32h750xx_flash.icf + +# For flash-jlink target +JLINK_DEVICE = stm32h750vb + +# flash target using on-board stlink +flash: flash-jlink diff --git a/hw/bsp/stm32h7/boards/stm32h750_weact/stm32h750xx_flash_CM7.ld b/hw/bsp/stm32h7/boards/stm32h750_weact/stm32h750xx_flash_CM7.ld new file mode 100644 index 000000000..30f220a42 --- /dev/null +++ b/hw/bsp/stm32h7/boards/stm32h750_weact/stm32h750xx_flash_CM7.ld @@ -0,0 +1,170 @@ +/* +****************************************************************************** +** + +** File : LinkerScript.ld +** +** +** Abstract : Linker script for STM32H7 series +** 128Kbytes FLASH and 1Mbytes RAM +** +** Set heap size, stack size and stack location according +** to application requirements. +** +** Set memory bank area and size if external memory is used. +** +** Target : STMicroelectronics STM32 +** +** Distribution: The file is distributed �as is,� without any warranty +** of any kind. +** +***************************************************************************** +** @attention +** +** Copyright (c) 2019 STMicroelectronics. +** All rights reserved. +** +** This software component is licensed by ST under BSD 3-Clause license, +** the "License"; You may not use this file except in compliance with the +** License. You may obtain a copy of the License at: +** opensource.org/licenses/BSD-3-Clause +** +**************************************************************************** +*/ + +/* Entry Point */ +ENTRY(Reset_Handler) + +/* Highest address of the user mode stack */ +_estack = 0x20020000; /* end of RAM */ +/* Generate a link error if heap and stack don't fit into RAM */ +_Min_Heap_Size = 0x200; /* required amount of heap */ +_Min_Stack_Size = 0x400; /* required amount of stack */ + +/* Specify the memory areas */ +MEMORY +{ +FLASH (rx) : ORIGIN = 0x08000000, LENGTH = 128K +RAM (xrw) : ORIGIN = 0x20000000, LENGTH = 1M +ITCMRAM (xrw) : ORIGIN = 0x00000000, LENGTH = 64K +} + +/* Define output sections */ +SECTIONS +{ + /* The startup code goes first into FLASH */ + .isr_vector : + { + . = ALIGN(4); + KEEP(*(.isr_vector)) /* Startup code */ + . = ALIGN(4); + } >FLASH + + /* The program code and other data goes into FLASH */ + .text : + { + . = ALIGN(4); + *(.text) /* .text sections (code) */ + *(.text*) /* .text* sections (code) */ + *(.glue_7) /* glue arm to thumb code */ + *(.glue_7t) /* glue thumb to arm code */ + *(.eh_frame) + + KEEP (*(.init)) + KEEP (*(.fini)) + + . = ALIGN(4); + _etext = .; /* define a global symbols at end of code */ + } >FLASH + + /* Constant data goes into FLASH */ + .rodata : + { + . = ALIGN(4); + *(.rodata) /* .rodata sections (constants, strings, etc.) */ + *(.rodata*) /* .rodata* sections (constants, strings, etc.) */ + . = ALIGN(4); + } >FLASH + + .ARM.extab : { *(.ARM.extab* .gnu.linkonce.armextab.*) } >FLASH + .ARM : { + __exidx_start = .; + *(.ARM.exidx*) + __exidx_end = .; + } >FLASH + + .preinit_array : + { + PROVIDE_HIDDEN (__preinit_array_start = .); + KEEP (*(.preinit_array*)) + PROVIDE_HIDDEN (__preinit_array_end = .); + } >FLASH + .init_array : + { + PROVIDE_HIDDEN (__init_array_start = .); + KEEP (*(SORT(.init_array.*))) + KEEP (*(.init_array*)) + PROVIDE_HIDDEN (__init_array_end = .); + } >FLASH + .fini_array : + { + PROVIDE_HIDDEN (__fini_array_start = .); + KEEP (*(SORT(.fini_array.*))) + KEEP (*(.fini_array*)) + PROVIDE_HIDDEN (__fini_array_end = .); + } >FLASH + + /* used by the startup to initialize data */ + _sidata = LOADADDR(.data); + + /* Initialized data sections goes into RAM, load LMA copy after code */ + .data : + { + . = ALIGN(4); + _sdata = .; /* create a global symbol at data start */ + *(.data) /* .data sections */ + *(.data*) /* .data* sections */ + + . = ALIGN(4); + _edata = .; /* define a global symbol at data end */ + } >RAM AT> FLASH + + + /* Uninitialized data section */ + . = ALIGN(4); + .bss : + { + /* This is used by the startup in order to initialize the .bss section */ + _sbss = .; /* define a global symbol at bss start */ + __bss_start__ = _sbss; + *(.bss) + *(.bss*) + *(COMMON) + + . = ALIGN(4); + _ebss = .; /* define a global symbol at bss end */ + __bss_end__ = _ebss; + } >RAM + + /* User_heap_stack section, used to check that there is enough RAM left */ + ._user_heap_stack : + { + . = ALIGN(8); + PROVIDE ( end = . ); + PROVIDE ( _end = . ); + . = . + _Min_Heap_Size; + . = . + _Min_Stack_Size; + . = ALIGN(8); + } >RAM + + + /* Remove information from the standard libraries */ + /DISCARD/ : + { + libc.a ( * ) + libm.a ( * ) + libgcc.a ( * ) + } + + .ARM.attributes 0 : { *(.ARM.attributes) } +} diff --git a/hw/bsp/stm32h7/boards/stm32h750bdk/board.cmake b/hw/bsp/stm32h7/boards/stm32h750bdk/board.cmake index 6eff708a8..e87be8255 100644 --- a/hw/bsp/stm32h7/boards/stm32h750bdk/board.cmake +++ b/hw/bsp/stm32h7/boards/stm32h750bdk/board.cmake @@ -1,5 +1,5 @@ set(MCU_VARIANT stm32h750xx) -set(JLINK_DEVICE stm32h750xb_m7) +set(JLINK_DEVICE stm32h750xb) set(LD_FILE_GNU ${CMAKE_CURRENT_LIST_DIR}/${MCU_VARIANT}_flash_CM7.ld) set(LD_FILE_IAR ${ST_CMSIS}/Source/Templates/iar/linker/${MCU_VARIANT}_flash.icf) diff --git a/hw/bsp/stm32h7/boards/stm32h750bdk/board.mk b/hw/bsp/stm32h7/boards/stm32h750bdk/board.mk index d37a425fb..923c90753 100644 --- a/hw/bsp/stm32h7/boards/stm32h750bdk/board.mk +++ b/hw/bsp/stm32h7/boards/stm32h750bdk/board.mk @@ -15,7 +15,7 @@ SRC_S_IAR += $(ST_CMSIS)/Source/Templates/iar/startup_stm32h750xx.s LD_FILE_IAR = $(ST_CMSIS)/Source/Templates/iar/linker/stm32h750xx_flash.icf # For flash-jlink target -JLINK_DEVICE = stm32h750xb_m7 +JLINK_DEVICE = stm32h750xb # flash target using on-board stlink flash: flash-stlink diff --git a/hw/bsp/stm32h7/family.c b/hw/bsp/stm32h7/family.c index adeb38e74..c81437958 100644 --- a/hw/bsp/stm32h7/family.c +++ b/hw/bsp/stm32h7/family.c @@ -102,9 +102,6 @@ void board_init(void) { trace_etm_init(); - // Enable UART Clock - UART_CLK_EN(); - #if CFG_TUSB_OS == OPT_OS_NONE // 1ms tick timer SysTick_Config(SystemCoreClock / 1000); @@ -136,7 +133,10 @@ void board_init(void) { GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_HIGH; HAL_GPIO_Init(BUTTON_PORT, &GPIO_InitStruct); +#ifdef UART_DEV // Uart + UART_CLK_EN(); + GPIO_InitStruct.Pin = UART_TX_PIN | UART_RX_PIN; GPIO_InitStruct.Mode = GPIO_MODE_AF_PP; GPIO_InitStruct.Pull = GPIO_PULLUP; @@ -153,6 +153,7 @@ void board_init(void) { UartHandle.Init.Mode = UART_MODE_TX_RX; UartHandle.Init.OverSampling = UART_OVERSAMPLING_16; HAL_UART_Init(&UartHandle); +#endif #if BOARD_TUD_RHPORT == 0 // Despite being call USB2_OTG @@ -280,8 +281,13 @@ int board_uart_read(uint8_t *buf, int len) { } int board_uart_write(void const *buf, int len) { +#ifdef UART_DEV HAL_UART_Transmit(&UartHandle, (uint8_t * )(uintptr_t) buf, len, 0xffff); +#else + (void) buf; +#endif + return len; } diff --git a/src/portable/synopsys/dwc2/dwc2_info.md b/src/portable/synopsys/dwc2/dwc2_info.md index 5c7e5e688..cfd0c81a8 100644 --- a/src/portable/synopsys/dwc2/dwc2_info.md +++ b/src/portable/synopsys/dwc2/dwc2_info.md @@ -1,58 +1,58 @@ -| | BCM2711 (Pi4) | EFM32GG FS | ESP32-S2/S3 | ESP32-P4 | ST F407/411/429 FS | ST F407/429 HS | ST F412/767 FS | ST F723 FS | ST F723 HS | ST F769 | ST H743 HS | ST L476 FS | ST U5A5 HS | GD32VF103 FS | XMC4500 | -|:---------------------------|:----------------|:-------------|:--------------|:-------------|:---------------------|:-----------------|:-----------------|:-------------|:-------------|:-------------|:-------------|:-------------|:-------------|:---------------|:-------------| -| GUID | 0x2708A000 | 0x00000000 | 0x00000000 | 0x00000000 | 0x00001200 | 0x00001100 | 0x00002000 | 0x00003000 | 0x00003100 | 0x00002100 | 0x00002300 | 0x00002000 | 0x00005000 | 0x00001000 | 0x00AEC000 | -| GSNPSID | 0x4F54280A | 0x4F54330A | 0x4F54400A | 0x4F54400A | 0x4F54281A | 0x4F54281A | 0x4F54320A | 0x4F54330A | 0x4F54330A | 0x4F54320A | 0x4F54330A | 0x4F54310A | 0x4F54411A | 0x00000000 | 0x4F54292A | -| - specs version | 2.80a | 3.30a | 4.00a | 4.00a | 2.81a | 2.81a | 3.20a | 3.30a | 3.30a | 3.20a | 3.30a | 3.10a | 4.11a | 0.00W | 2.92a | -| GHWCFG1 | 0x00000000 | 0x00000000 | 0x00000000 | 0x00000000 | 0x00000000 | 0x00000000 | 0x00000000 | 0x00000000 | 0x00000000 | 0x00000000 | 0x00000000 | 0x00000000 | 0x00000000 | 0x00000000 | 0x00000000 | -| GHWCFG2 | 0x228DDD50 | 0x228F5910 | 0x224DD930 | 0x215FFFD0 | 0x229DCD20 | 0x229ED590 | 0x229ED520 | 0x229ED520 | 0x229FE1D0 | 0x229FE190 | 0x229FE190 | 0x229ED520 | 0x228FE052 | 0x00000000 | 0x228F5930 | -| - op_mode | HNP SRP | HNP SRP | HNP SRP | HNP SRP | HNP SRP | HNP SRP | HNP SRP | HNP SRP | HNP SRP | HNP SRP | HNP SRP | HNP SRP | noHNP noSRP | HNP SRP | HNP SRP | -| - arch | DMA internal | DMA internal | DMA internal | DMA internal | Slave only | DMA internal | Slave only | Slave only | DMA internal | DMA internal | DMA internal | Slave only | DMA internal | Slave only | DMA internal | -| - p2p (hub support) | 0 | 0 | 1 | 0 | 1 | 0 | 1 | 1 | 0 | 0 | 0 | 1 | 0 | 0 | 1 | -| - hs_phy_type | UTMI+ | n/a | n/a | UTMI+/ULPI | n/a | ULPI | n/a | n/a | UTMI+/ULPI | ULPI | ULPI | n/a | UTMI+ | n/a | n/a | -| - fs_phy_type | Dedicated | Dedicated | Dedicated | Shared ULPI | Dedicated | Dedicated | Dedicated | Dedicated | Dedicated | Dedicated | Dedicated | Dedicated | n/a | n/a | Dedicated | -| - num_dev_ep | 7 | 6 | 6 | 15 | 3 | 5 | 5 | 5 | 8 | 8 | 8 | 5 | 8 | 0 | 6 | -| - num_host_ch | 7 | 13 | 7 | 15 | 7 | 11 | 11 | 11 | 15 | 15 | 15 | 11 | 15 | 0 | 13 | -| - period_channel_support | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 0 | 1 | -| - enable_dynamic_fifo | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 0 | 1 | -| - mul_proc_intrpt | 0 | 0 | 0 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 0 | 0 | 0 | -| - reserved21 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | -| - nptx_q_depth | 2 | 2 | 1 | 1 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 0 | 2 | -| - ptx_q_depth | 2 | 2 | 2 | 1 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 0 | 2 | -| - token_q_depth | 8 | 8 | 8 | 8 | 8 | 8 | 8 | 8 | 8 | 8 | 8 | 8 | 8 | 0 | 8 | -| - otg_enable_ic_usb | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | -| GHWCFG3 | 0x0FF000E8 | 0x01F204E8 | 0x00C804B5 | 0x03805EB5 | 0x020001E8 | 0x03F403E8 | 0x0200D1E8 | 0x0200D1E8 | 0x03EED2E8 | 0x03EED2E8 | 0x03B8D2E8 | 0x0200D1E8 | 0x03B882E8 | 0x00000000 | 0x027A01E5 | -| - xfer_size_width | 8 | 8 | 5 | 5 | 8 | 8 | 8 | 8 | 8 | 8 | 8 | 8 | 8 | 0 | 5 | -| - packet_size_width | 6 | 6 | 3 | 3 | 6 | 6 | 6 | 6 | 6 | 6 | 6 | 6 | 6 | 0 | 6 | -| - otg_enable | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 0 | 1 | -| - i2c_enable | 0 | 0 | 0 | 0 | 1 | 1 | 1 | 1 | 0 | 0 | 0 | 1 | 0 | 0 | 1 | -| - vendor_ctrl_itf | 0 | 0 | 0 | 1 | 0 | 1 | 0 | 0 | 1 | 1 | 1 | 0 | 1 | 0 | 0 | -| - optional_feature_removed | 0 | 1 | 1 | 1 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | -| - synch_reset | 0 | 0 | 0 | 1 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | -| - otg_adp_support | 0 | 0 | 0 | 1 | 0 | 0 | 1 | 1 | 1 | 1 | 1 | 1 | 0 | 0 | 0 | -| - otg_enable_hsic | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | -| - battery_charger_support | 0 | 0 | 0 | 1 | 0 | 0 | 1 | 1 | 1 | 1 | 1 | 1 | 0 | 0 | 0 | -| - lpm_mode | 0 | 0 | 0 | 0 | 0 | 0 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 0 | 0 | -| - dfifo_depth | 4080 | 498 | 200 | 896 | 512 | 1012 | 512 | 512 | 1006 | 1006 | 952 | 512 | 952 | 0 | 634 | -| GHWCFG4 | 0x1FF00020 | 0x1BF08030 | 0xD3F0A030 | 0xDFF1A030 | 0x0FF08030 | 0x17F00030 | 0x17F08030 | 0x17F08030 | 0x23F00030 | 0x23F00030 | 0xE3F00030 | 0x17F08030 | 0xE2103E30 | 0x00000000 | 0xDBF08030 | -| - num_dev_period_in_ep | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | -| - partial_powerdown | 0 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 0 | 1 | -| - ahb_freq_min | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 0 | 1 | -| - hibernation | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | -| - extended_hibernation | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | -| - reserved8 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | -| - enhanced_lpm_support1 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 1 | 0 | 0 | -| - service_interval_flow | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 1 | 0 | 0 | -| - ipg_isoc_support | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 1 | 0 | 0 | -| - acg_support | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 1 | 0 | 0 | -| - enhanced_lpm_support | 0 | 0 | 1 | 1 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 1 | 0 | 0 | -| - phy_data_width | 8 bit | 8/16 bit | 8/16 bit | 8/16 bit | 8/16 bit | 8 bit | 8/16 bit | 8/16 bit | 8 bit | 8 bit | 8 bit | 8/16 bit | 8 bit | 8 bit | 8/16 bit | -| - ctrl_ep_num | 0 | 0 | 0 | 1 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | -| - iddg_filter | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 0 | 1 | -| - vbus_valid_filter | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 0 | 0 | 1 | -| - a_valid_filter | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 0 | 0 | 1 | -| - b_valid_filter | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 0 | 0 | 1 | -| - session_end_filter | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 0 | 0 | 1 | -| - dedicated_fifos | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 0 | 1 | -| - num_dev_in_eps | 7 | 6 | 4 | 7 | 3 | 5 | 5 | 5 | 8 | 8 | 8 | 5 | 8 | 0 | 6 | -| - dma_desc_enable | 0 | 0 | 1 | 1 | 0 | 0 | 0 | 0 | 0 | 0 | 1 | 0 | 1 | 0 | 1 | -| - dma_desc_dynamic | 0 | 0 | 1 | 1 | 0 | 0 | 0 | 0 | 0 | 0 | 1 | 0 | 1 | 0 | 1 | +| | BCM2711 (Pi4) | EFM32GG | ESP32-S2/S3 | ESP32-P4 | ST F207/F407/411/429 FS | ST F407/429 HS | ST F412/767 FS | ST F723/L4P5 FS | ST F723 HS | ST F769 | ST H743/H750 | ST L476 FS | ST U5A5 HS | GD32VF103 | XMC4500 | +|:---------------------------|:----------------|:-------------|:--------------|:-------------|:--------------------------|:-----------------|:-----------------|:------------------|:-------------|:-------------|:---------------|:-------------|:-------------|:------------|:-------------| +| GUID | 0x2708A000 | 0x00000000 | 0x00000000 | 0x00000000 | 0x00001200 | 0x00001100 | 0x00002000 | 0x00003000 | 0x00003100 | 0x00002100 | 0x00002300 | 0x00002000 | 0x00005000 | 0x00001000 | 0x00AEC000 | +| GSNPSID | 0x4F54280A | 0x4F54330A | 0x4F54400A | 0x4F54400A | 0x4F54281A | 0x4F54281A | 0x4F54320A | 0x4F54330A | 0x4F54330A | 0x4F54320A | 0x4F54330A | 0x4F54310A | 0x4F54411A | 0x00000000 | 0x4F54292A | +| - specs version | 2.80a | 3.30a | 4.00a | 4.00a | 2.81a | 2.81a | 3.20a | 3.30a | 3.30a | 3.20a | 3.30a | 3.10a | 4.11a | 0.00W | 2.92a | +| GHWCFG1 | 0x00000000 | 0x00000000 | 0x00000000 | 0x00000000 | 0x00000000 | 0x00000000 | 0x00000000 | 0x00000000 | 0x00000000 | 0x00000000 | 0x00000000 | 0x00000000 | 0x00000000 | 0x00000000 | 0x00000000 | +| GHWCFG2 | 0x228DDD50 | 0x228F5910 | 0x224DD930 | 0x215FFFD0 | 0x229DCD20 | 0x229ED590 | 0x229ED520 | 0x229ED520 | 0x229FE1D0 | 0x229FE190 | 0x229FE190 | 0x229ED520 | 0x228FE052 | 0x00000000 | 0x228F5930 | +| - op_mode | HNP SRP | HNP SRP | HNP SRP | HNP SRP | HNP SRP | HNP SRP | HNP SRP | HNP SRP | HNP SRP | HNP SRP | HNP SRP | HNP SRP | noHNP noSRP | HNP SRP | HNP SRP | +| - arch | DMA internal | DMA internal | DMA internal | DMA internal | Slave only | DMA internal | Slave only | Slave only | DMA internal | DMA internal | DMA internal | Slave only | DMA internal | Slave only | DMA internal | +| - p2p (hub support) | 0 | 0 | 1 | 0 | 1 | 0 | 1 | 1 | 0 | 0 | 0 | 1 | 0 | 0 | 1 | +| - hs_phy_type | UTMI+ | n/a | n/a | UTMI+/ULPI | n/a | ULPI | n/a | n/a | UTMI+/ULPI | ULPI | ULPI | n/a | UTMI+ | n/a | n/a | +| - fs_phy_type | Dedicated | Dedicated | Dedicated | Shared ULPI | Dedicated | Dedicated | Dedicated | Dedicated | Dedicated | Dedicated | Dedicated | Dedicated | n/a | n/a | Dedicated | +| - num_dev_ep | 7 | 6 | 6 | 15 | 3 | 5 | 5 | 5 | 8 | 8 | 8 | 5 | 8 | 0 | 6 | +| - num_host_ch | 7 | 13 | 7 | 15 | 7 | 11 | 11 | 11 | 15 | 15 | 15 | 11 | 15 | 0 | 13 | +| - period_channel_support | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 0 | 1 | +| - enable_dynamic_fifo | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 0 | 1 | +| - mul_proc_intrpt | 0 | 0 | 0 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 0 | 0 | 0 | +| - reserved21 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | +| - nptx_q_depth | 2 | 2 | 1 | 1 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 0 | 2 | +| - ptx_q_depth | 2 | 2 | 2 | 1 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 0 | 2 | +| - token_q_depth | 8 | 8 | 8 | 8 | 8 | 8 | 8 | 8 | 8 | 8 | 8 | 8 | 8 | 0 | 8 | +| - otg_enable_ic_usb | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | +| GHWCFG3 | 0x0FF000E8 | 0x01F204E8 | 0x00C804B5 | 0x03805EB5 | 0x020001E8 | 0x03F403E8 | 0x0200D1E8 | 0x0200D1E8 | 0x03EED2E8 | 0x03EED2E8 | 0x03B8D2E8 | 0x0200D1E8 | 0x03B882E8 | 0x00000000 | 0x027A01E5 | +| - xfer_size_width | 8 | 8 | 5 | 5 | 8 | 8 | 8 | 8 | 8 | 8 | 8 | 8 | 8 | 0 | 5 | +| - packet_size_width | 6 | 6 | 3 | 3 | 6 | 6 | 6 | 6 | 6 | 6 | 6 | 6 | 6 | 0 | 6 | +| - otg_enable | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 0 | 1 | +| - i2c_enable | 0 | 0 | 0 | 0 | 1 | 1 | 1 | 1 | 0 | 0 | 0 | 1 | 0 | 0 | 1 | +| - vendor_ctrl_itf | 0 | 0 | 0 | 1 | 0 | 1 | 0 | 0 | 1 | 1 | 1 | 0 | 1 | 0 | 0 | +| - optional_feature_removed | 0 | 1 | 1 | 1 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | +| - synch_reset | 0 | 0 | 0 | 1 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | +| - otg_adp_support | 0 | 0 | 0 | 1 | 0 | 0 | 1 | 1 | 1 | 1 | 1 | 1 | 0 | 0 | 0 | +| - otg_enable_hsic | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | +| - battery_charger_support | 0 | 0 | 0 | 1 | 0 | 0 | 1 | 1 | 1 | 1 | 1 | 1 | 0 | 0 | 0 | +| - lpm_mode | 0 | 0 | 0 | 0 | 0 | 0 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 0 | 0 | +| - dfifo_depth | 4080 | 498 | 200 | 896 | 512 | 1012 | 512 | 512 | 1006 | 1006 | 952 | 512 | 952 | 0 | 634 | +| GHWCFG4 | 0x1FF00020 | 0x1BF08030 | 0xD3F0A030 | 0xDFF1A030 | 0x0FF08030 | 0x17F00030 | 0x17F08030 | 0x17F08030 | 0x23F00030 | 0x23F00030 | 0xE3F00030 | 0x17F08030 | 0xE2103E30 | 0x00000000 | 0xDBF08030 | +| - num_dev_period_in_ep | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | +| - partial_powerdown | 0 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 0 | 1 | +| - ahb_freq_min | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 0 | 1 | +| - hibernation | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | +| - extended_hibernation | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | +| - reserved8 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | +| - enhanced_lpm_support1 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 1 | 0 | 0 | +| - service_interval_flow | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 1 | 0 | 0 | +| - ipg_isoc_support | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 1 | 0 | 0 | +| - acg_support | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 1 | 0 | 0 | +| - enhanced_lpm_support | 0 | 0 | 1 | 1 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 1 | 0 | 0 | +| - phy_data_width | 8 bit | 8/16 bit | 8/16 bit | 8/16 bit | 8/16 bit | 8 bit | 8/16 bit | 8/16 bit | 8 bit | 8 bit | 8 bit | 8/16 bit | 8 bit | 8 bit | 8/16 bit | +| - ctrl_ep_num | 0 | 0 | 0 | 1 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | +| - iddg_filter | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 0 | 1 | +| - vbus_valid_filter | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 0 | 0 | 1 | +| - a_valid_filter | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 0 | 0 | 1 | +| - b_valid_filter | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 0 | 0 | 1 | +| - session_end_filter | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 0 | 0 | 1 | +| - dedicated_fifos | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 0 | 1 | +| - num_dev_in_eps | 7 | 6 | 4 | 7 | 3 | 5 | 5 | 5 | 8 | 8 | 8 | 5 | 8 | 0 | 6 | +| - dma_desc_enable | 0 | 0 | 1 | 1 | 0 | 0 | 0 | 0 | 0 | 0 | 1 | 0 | 1 | 0 | 1 | +| - dma_desc_dynamic | 0 | 0 | 1 | 1 | 0 | 0 | 0 | 0 | 0 | 0 | 1 | 0 | 1 | 0 | 1 | diff --git a/src/portable/synopsys/dwc2/dwc2_info.py b/src/portable/synopsys/dwc2/dwc2_info.py index ac32eb585..d1793a005 100755 --- a/src/portable/synopsys/dwc2/dwc2_info.py +++ b/src/portable/synopsys/dwc2/dwc2_info.py @@ -10,20 +10,21 @@ import pandas as pd dwc2_reg_list = ['GUID', 'GSNPSID', 'GHWCFG1', 'GHWCFG2', 'GHWCFG3', 'GHWCFG4'] dwc2_reg_value = { 'BCM2711 (Pi4)': [0x2708A000, 0x4F54280A, 0, 0x228DDD50, 0xFF000E8, 0x1FF00020], - 'EFM32GG FS': [0, 0x4F54330A, 0, 0x228F5910, 0x1F204E8, 0x1BF08030], - 'ESP32-S2/S3': [0, 0x4F54400A, 0, 0x224DD930, 0xC804B5, 0xD3F0A030], + 'EFM32GG': [0, 0x4F54330A, 0, 0x228F5910, 0x01F204E8, 0x1BF08030], + 'ESP32-S2/S3': [0, 0x4F54400A, 0, 0x224DD930, 0x0C804B5, 0xD3F0A030], 'ESP32-P4': [0, 0x4F54400A, 0, 0x215FFFD0, 0x03805EB5, 0xDFF1A030], - 'ST F407/411/429 FS': [0x1200, 0x4F54281A, 0, 0x229DCD20, 0x20001E8, 0xFF08030], - 'ST F407/429 HS': [0x1100, 0x4F54281A, 0, 0x229ED590, 0x3F403E8, 0x17F00030], - 'ST F412/767 FS': [0x2000, 0x4F54320A, 0, 0x229ED520, 0x200D1E8, 0x17F08030], - 'ST F723 FS': [0x3000, 0x4F54330A, 0, 0x229ED520, 0x200D1E8, 0x17F08030], - 'ST F723 HS': [0x3100, 0x4F54330A, 0, 0x229FE1D0, 0x3EED2E8, 0x23F00030], + 'ST F207/F407/411/429 FS': [0x1200, 0x4F54281A, 0, 0x229DCD20, 0x020001E8, 0x0FF08030], + 'ST F407/429 HS': [0x1100, 0x4F54281A, 0, 0x229ED590, 0x03F403E8, 0x17F00030], + 'ST F412/767 FS': [0x2000, 0x4F54320A, 0, 0x229ED520, 0x0200D1E8, 0x17F08030], + 'ST F723/L4P5 FS': [0x3000, 0x4F54330A, 0, 0x229ED520, 0x0200D1E8, 0x17F08030], + 'ST F723 HS': [0x3100, 0x4F54330A, 0, 0x229FE1D0, 0x03EED2E8, 0x23F00030], 'ST F769': [0x2100, 0x4F54320A, 0, 0x229FE190, 0x03EED2E8, 0x23F00030], - 'ST H743 HS': [0x2300, 0x4F54330A, 0, 0x229FE190, 0x3B8D2E8, 0xE3F00030], # both HS cores - 'ST L476 FS': [0x2000, 0x4F54310A, 0, 0x229ED520, 0x200D1E8, 0x17F08030], + 'ST H743/H750': [0x2300, 0x4F54330A, 0, 0x229FE190, 0x03B8D2E8, 0xE3F00030], + 'ST L476 FS': [0x2000, 0x4F54310A, 0, 0x229ED520, 0x0200D1E8, 0x17F08030], 'ST U5A5 HS': [0x5000, 0x4F54411A, 0, 0x228FE052, 0x03B882E8, 0xE2103E30], - 'GD32VF103 FS': [0x1000, 0, 0, 0, 0, 0], - 'XMC4500': [0xAEC000, 0x4F54292A, 0, 0x228F5930, 0x27A01E5, 0xDBF08030] + 'GD32VF103': [0x1000, 0, 0, 0, 0, 0], + 'XMC4500': [0xAEC000, 0x4F54292A, 0, 0x228F5930, 0x027A01E5, 0xDBF08030] + } # Combine dwc2_info with dwc2_reg_list diff --git a/test/hil/hil_test.py b/test/hil/hil_test.py index 60bba9bd2..0d7cae77e 100755 --- a/test/hil/hil_test.py +++ b/test/hil/hil_test.py @@ -245,7 +245,7 @@ def test_dual_host_info_to_device_cdc(board): # for pico/pico2 make this test optional failed_msg = f'Enumerated devices {enum_dev_sn} not match with declared {declared_devs}' if 'raspberry_pi_pico' in board['name']: - print(f'\r\n {failed_msg} ', end='') + print(f'\r\n {failed_msg} {STATUS_FAILED} ', end='') else: assert False, failed_msg return 0 diff --git a/test/hil/tinyusb.json b/test/hil/tinyusb.json index 2358c3c4f..44d4a617c 100644 --- a/test/hil/tinyusb.json +++ b/test/hil/tinyusb.json @@ -20,6 +20,13 @@ "flasher_sn": "000682804350", "flasher_args": "-device nrf52840_xxaa" }, + { + "name": "max32666fthr", + "uid": "0C81464124010B20FF0A08CC2C", + "flasher": "openocd_adi", + "flasher_sn": "E6614C311B597D32", + "flasher_args": "-f interface/cmsis-dap.cfg -f target/max32665.cfg" + }, { "name": "metro_m4_express", "uid": "9995AD485337433231202020FF100A34", @@ -30,13 +37,6 @@ "dual_attached": [{"vid_pid": "1a86_55d4", "serial": "52D2002130"}] } }, - { - "name": "max32666fthr", - "uid": "0C81464124010B20FF0A08CC2C", - "flasher": "openocd_adi", - "flasher_sn": "E6614C311B597D32", - "flasher_args": "-f interface/cmsis-dap.cfg -f target/max32665.cfg" - }, { "name": "lpcxpresso11u37", "uid": "17121919", @@ -82,6 +82,16 @@ "flasher_sn": "779541626", "flasher_args": "-device stm32f072rb" }, + { + "name": "stm32f407disco", + "uid": "30001A000647313332353735", + "build" : { + "flags_on": ["", "CFG_TUD_DWC2_DMA"] + }, + "flasher": "jlink", + "flasher_sn": "000773661813", + "flasher_args": "-device stm32f407vg" + }, { "name": "stm32f769disco", "uid": "21002F000F51363531383437", -- cgit v1.3.1 From c3437961b8a9d65ca9efb2f6e22504cf1c695637 Mon Sep 17 00:00:00 2001 From: hathach Date: Thu, 10 Oct 2024 00:04:29 +0700 Subject: remove stm32f769disco since it is not reliable --- examples/device/cdc_dual_ports/skip.txt | 2 ++ test/hil/tinyusb.json | 18 +++++++++--------- 2 files changed, 11 insertions(+), 9 deletions(-) create mode 100644 examples/device/cdc_dual_ports/skip.txt (limited to 'test/hil') diff --git a/examples/device/cdc_dual_ports/skip.txt b/examples/device/cdc_dual_ports/skip.txt new file mode 100644 index 000000000..75184e5e5 --- /dev/null +++ b/examples/device/cdc_dual_ports/skip.txt @@ -0,0 +1,2 @@ +board:stm32f407disco +board:stm32f411disco diff --git a/test/hil/tinyusb.json b/test/hil/tinyusb.json index 44d4a617c..2313f5d13 100644 --- a/test/hil/tinyusb.json +++ b/test/hil/tinyusb.json @@ -92,6 +92,15 @@ "flasher_sn": "000773661813", "flasher_args": "-device stm32f407vg" }, + { + "name": "stm32g0b1nucleo", + "uid": "4D0038000450434E37343120", + "flasher": "openocd", + "flasher_sn": "066FFF495087534867063844", + "flasher_args": "-f interface/stlink.cfg -f target/stm32g0x.cfg" + } + ], + "boards-skip": [ { "name": "stm32f769disco", "uid": "21002F000F51363531383437", @@ -102,15 +111,6 @@ "flasher_sn": "000778170924", "flasher_args": "-device stm32f769ni" }, - { - "name": "stm32g0b1nucleo", - "uid": "4D0038000450434E37343120", - "flasher": "openocd", - "flasher_sn": "066FFF495087534867063844", - "flasher_args": "-f interface/stlink.cfg -f target/stm32g0x.cfg" - } - ], - "boards-skip": [ { "name": "mimxrt1015_evk", "uid": "DC28F865D2111D228D00B0543A70463C", -- cgit v1.3.1 From 13f78e2e7716fda1c0ee1ef09a8bc76fde4f4c57 Mon Sep 17 00:00:00 2001 From: hathach Date: Mon, 11 Nov 2024 16:07:33 +0700 Subject: add esp32p4 to hil --- hw/bsp/espressif/boards/espressif_p4_function_ev/board.h | 4 ++++ hw/bsp/espressif/boards/family.c | 6 ++++++ test/hil/tinyusb.json | 13 +++++++++++++ 3 files changed, 23 insertions(+) (limited to 'test/hil') diff --git a/hw/bsp/espressif/boards/espressif_p4_function_ev/board.h b/hw/bsp/espressif/boards/espressif_p4_function_ev/board.h index 9c8aa409f..0022f0d2d 100644 --- a/hw/bsp/espressif/boards/espressif_p4_function_ev/board.h +++ b/hw/bsp/espressif/boards/espressif_p4_function_ev/board.h @@ -36,6 +36,10 @@ #define BUTTON_PIN 0 #define BUTTON_STATE_ACTIVE 0 +// For CI hardware test, to test both device and host on the same HS port with help of +#define HIL_DEVICE_HOST_MUX_PIN 47 +#define HIL_DEVICE_STATE 1 + #ifdef __cplusplus } #endif diff --git a/hw/bsp/espressif/boards/family.c b/hw/bsp/espressif/boards/family.c index 0b1e8badb..729b3539d 100644 --- a/hw/bsp/espressif/boards/family.c +++ b/hw/bsp/espressif/boards/family.c @@ -105,6 +105,12 @@ void board_init(void) { usb_init(); #endif +#ifdef HIL_DEVICE_HOST_MUX_PIN + gpio_reset_pin(HIL_DEVICE_HOST_MUX_PIN); + gpio_set_direction(HIL_DEVICE_HOST_MUX_PIN, GPIO_MODE_OUTPUT); + gpio_set_level(HIL_DEVICE_HOST_MUX_PIN, CFG_TUD_ENABLED ? HIL_DEVICE_STATE : (1-HIL_DEVICE_STATE)); +#endif + #if CFG_TUH_ENABLED && CFG_TUH_MAX3421 max3421_init(); #endif diff --git a/test/hil/tinyusb.json b/test/hil/tinyusb.json index 2313f5d13..c92224e26 100644 --- a/test/hil/tinyusb.json +++ b/test/hil/tinyusb.json @@ -1,5 +1,18 @@ { "boards": [ + { + "name": "espressif_p4_function_ev", + "uid": "6055F9F98715", + "build" : { + "flags_on": ["", "CFG_TUD_DWC2_DMA"] + }, + "tests": { + "only": ["device/cdc_msc_freertos", "device/hid_composite_freertos"] + }, + "flasher": "esptool", + "flasher_sn": "4ea4f48f6bc3ee11bbb9d00f9e1b1c54", + "flasher_args": "-b 1500000" + }, { "name": "espressif_s3_devkitm", "uid": "84F703C084E4", -- cgit v1.3.1 From 57c8c223e5f873e8075eb807844140004c74472d Mon Sep 17 00:00:00 2001 From: hathach Date: Mon, 11 Nov 2024 16:42:08 +0700 Subject: correctly test dwc2 dma device for s3, disable for p4 (cache issue) and f407 fs (slave only) --- .../components/tinyusb_src/CMakeLists.txt | 5 + src/portable/synopsys/dwc2/dwc2_info.md | 116 ++++++++++----------- src/portable/synopsys/dwc2/dwc2_info.py | 6 +- test/hil/tinyusb.json | 6 -- 4 files changed, 66 insertions(+), 67 deletions(-) (limited to 'test/hil') diff --git a/hw/bsp/espressif/components/tinyusb_src/CMakeLists.txt b/hw/bsp/espressif/components/tinyusb_src/CMakeLists.txt index e2250c4ca..900f620fd 100644 --- a/hw/bsp/espressif/components/tinyusb_src/CMakeLists.txt +++ b/hw/bsp/espressif/components/tinyusb_src/CMakeLists.txt @@ -60,6 +60,11 @@ if (DEFINED LOG) endif () endif() +if(DEFINED CFLAGS_CLI) + list(APPEND compile_definitions ${CFLAGS_CLI}) +endif() + + idf_component_register(SRCS ${srcs} INCLUDE_DIRS ${tusb_src} REQUIRES src diff --git a/src/portable/synopsys/dwc2/dwc2_info.md b/src/portable/synopsys/dwc2/dwc2_info.md index 78c2c50f8..dec021f59 100644 --- a/src/portable/synopsys/dwc2/dwc2_info.md +++ b/src/portable/synopsys/dwc2/dwc2_info.md @@ -1,58 +1,58 @@ -| | BCM2711 (Pi4) | EFM32GG | ESP32-S2/S3 | ESP32-P4 | ST F207/F407/411/429 FS | ST F407/429 HS | ST F412/767 FS | ST F723/L4P5 FS | ST F723 HS | ST F769 | ST H743/H750 | ST L476 FS | ST U5A5 HS | GD32VF103 | XMC4500 | -|:---------------------------|:----------------|:-------------|:--------------|:-------------|:--------------------------|:-----------------|:-----------------|:------------------|:-------------|:-------------|:---------------|:-------------|:-------------|:------------|:-------------| -| GUID | 0x2708A000 | 0x00000000 | 0x00000000 | 0x00000000 | 0x00001200 | 0x00001100 | 0x00002000 | 0x00003000 | 0x00003100 | 0x00002100 | 0x00002300 | 0x00002000 | 0x00005000 | 0x00001000 | 0x00AEC000 | -| GSNPSID | 0x4F54280A | 0x4F54330A | 0x4F54400A | 0x4F54400A | 0x4F54281A | 0x4F54281A | 0x4F54320A | 0x4F54330A | 0x4F54330A | 0x4F54320A | 0x4F54330A | 0x4F54310A | 0x4F54411A | 0x00000000 | 0x4F54292A | -| - specs version | 2.80a | 3.30a | 4.00a | 4.00a | 2.81a | 2.81a | 3.20a | 3.30a | 3.30a | 3.20a | 3.30a | 3.10a | 4.11a | 0.00W | 2.92a | -| GHWCFG1 | 0x00000000 | 0x00000000 | 0x00000000 | 0x00000000 | 0x00000000 | 0x00000000 | 0x00000000 | 0x00000000 | 0x00000000 | 0x00000000 | 0x00000000 | 0x00000000 | 0x00000000 | 0x00000000 | 0x00000000 | -| GHWCFG2 | 0x228DDD50 | 0x228F5910 | 0x224DD930 | 0x215FFFD0 | 0x229DCD20 | 0x229ED590 | 0x229ED520 | 0x229ED520 | 0x229FE1D0 | 0x229FE190 | 0x229FE190 | 0x229ED520 | 0x228FE052 | 0x00000000 | 0x228F5930 | -| - op_mode | HNP SRP | HNP SRP | HNP SRP | HNP SRP | HNP SRP | HNP SRP | HNP SRP | HNP SRP | HNP SRP | HNP SRP | HNP SRP | HNP SRP | noHNP noSRP | HNP SRP | HNP SRP | -| - arch | DMA internal | DMA internal | DMA internal | DMA internal | Slave only | DMA internal | Slave only | Slave only | DMA internal | DMA internal | DMA internal | Slave only | DMA internal | Slave only | DMA internal | -| - single_point | hub | hub | n/a | hub | n/a | hub | n/a | n/a | hub | hub | hub | n/a | hub | hub | n/a | -| - hs_phy_type | UTMI+ | n/a | n/a | UTMI+/ULPI | n/a | ULPI | n/a | n/a | UTMI+/ULPI | ULPI | ULPI | n/a | UTMI+ | n/a | n/a | -| - fs_phy_type | Dedicated | Dedicated | Dedicated | Shared ULPI | Dedicated | Dedicated | Dedicated | Dedicated | Dedicated | Dedicated | Dedicated | Dedicated | n/a | n/a | Dedicated | -| - num_dev_ep | 7 | 6 | 6 | 15 | 3 | 5 | 5 | 5 | 8 | 8 | 8 | 5 | 8 | 0 | 6 | -| - num_host_ch | 7 | 13 | 7 | 15 | 7 | 11 | 11 | 11 | 15 | 15 | 15 | 11 | 15 | 0 | 13 | -| - period_channel_support | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 0 | 1 | -| - enable_dynamic_fifo | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 0 | 1 | -| - mul_proc_intrpt | 0 | 0 | 0 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 0 | 0 | 0 | -| - reserved21 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | -| - nptx_q_depth | 8 | 8 | 4 | 4 | 8 | 8 | 8 | 8 | 8 | 8 | 8 | 8 | 8 | 2 | 8 | -| - ptx_q_depth | 8 | 8 | 8 | 4 | 8 | 8 | 8 | 8 | 8 | 8 | 8 | 8 | 8 | 2 | 8 | -| - token_q_depth | 8 | 8 | 8 | 8 | 8 | 8 | 8 | 8 | 8 | 8 | 8 | 8 | 8 | 0 | 8 | -| - otg_enable_ic_usb | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | -| GHWCFG3 | 0x0FF000E8 | 0x01F204E8 | 0x00C804B5 | 0x03805EB5 | 0x020001E8 | 0x03F403E8 | 0x0200D1E8 | 0x0200D1E8 | 0x03EED2E8 | 0x03EED2E8 | 0x03B8D2E8 | 0x0200D1E8 | 0x03B882E8 | 0x00000000 | 0x027A01E5 | -| - xfer_size_width | 8 | 8 | 5 | 5 | 8 | 8 | 8 | 8 | 8 | 8 | 8 | 8 | 8 | 0 | 5 | -| - packet_size_width | 6 | 6 | 3 | 3 | 6 | 6 | 6 | 6 | 6 | 6 | 6 | 6 | 6 | 0 | 6 | -| - otg_enable | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 0 | 1 | -| - i2c_enable | 0 | 0 | 0 | 0 | 1 | 1 | 1 | 1 | 0 | 0 | 0 | 1 | 0 | 0 | 1 | -| - vendor_ctrl_itf | 0 | 0 | 0 | 1 | 0 | 1 | 0 | 0 | 1 | 1 | 1 | 0 | 1 | 0 | 0 | -| - optional_feature_removed | 0 | 1 | 1 | 1 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | -| - synch_reset | 0 | 0 | 0 | 1 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | -| - otg_adp_support | 0 | 0 | 0 | 1 | 0 | 0 | 1 | 1 | 1 | 1 | 1 | 1 | 0 | 0 | 0 | -| - otg_enable_hsic | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | -| - battery_charger_support | 0 | 0 | 0 | 1 | 0 | 0 | 1 | 1 | 1 | 1 | 1 | 1 | 0 | 0 | 0 | -| - lpm_mode | 0 | 0 | 0 | 0 | 0 | 0 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 0 | 0 | -| - dfifo_depth | 4080 | 498 | 200 | 896 | 512 | 1012 | 512 | 512 | 1006 | 1006 | 952 | 512 | 952 | 0 | 634 | -| GHWCFG4 | 0x1FF00020 | 0x1BF08030 | 0xD3F0A030 | 0xDFF1A030 | 0x0FF08030 | 0x17F00030 | 0x17F08030 | 0x17F08030 | 0x23F00030 | 0x23F00030 | 0xE3F00030 | 0x17F08030 | 0xE2103E30 | 0x00000000 | 0xDBF08030 | -| - num_dev_period_in_ep | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | -| - partial_powerdown | 0 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 0 | 1 | -| - ahb_freq_min | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 0 | 1 | -| - hibernation | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | -| - extended_hibernation | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | -| - reserved8 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | -| - enhanced_lpm_support1 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 1 | 0 | 0 | -| - service_interval_flow | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 1 | 0 | 0 | -| - ipg_isoc_support | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 1 | 0 | 0 | -| - acg_support | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 1 | 0 | 0 | -| - enhanced_lpm_support | 0 | 0 | 1 | 1 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 1 | 0 | 0 | -| - phy_data_width | 8 bit | 8/16 bit | 8/16 bit | 8/16 bit | 8/16 bit | 8 bit | 8/16 bit | 8/16 bit | 8 bit | 8 bit | 8 bit | 8/16 bit | 8 bit | 8 bit | 8/16 bit | -| - ctrl_ep_num | 0 | 0 | 0 | 1 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | -| - iddg_filter | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 0 | 1 | -| - vbus_valid_filter | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 0 | 0 | 1 | -| - a_valid_filter | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 0 | 0 | 1 | -| - b_valid_filter | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 0 | 0 | 1 | -| - session_end_filter | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 0 | 0 | 1 | -| - dedicated_fifos | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 0 | 1 | -| - num_dev_in_eps | 7 | 6 | 4 | 7 | 3 | 5 | 5 | 5 | 8 | 8 | 8 | 5 | 8 | 0 | 6 | -| - dma_desc_enable | 0 | 0 | 1 | 1 | 0 | 0 | 0 | 0 | 0 | 0 | 1 | 0 | 1 | 0 | 1 | -| - dma_desc_dynamic | 0 | 0 | 1 | 1 | 0 | 0 | 0 | 0 | 0 | 0 | 1 | 0 | 1 | 0 | 1 | +| | BCM2711 (Pi4) | EFM32GG | ESP32-S2/S3 | ESP32-P4 | ST F207/F407/411/429 FS | ST F407/429 HS | ST F412/76x FS | ST F723/L4P5 FS | ST F723 HS | ST F76x HS | ST H743/H750 | ST L476 FS | ST U5A5 HS | XMC4500 | GD32VF103 | +|:---------------------------|:----------------|:-------------|:--------------|:-------------|:--------------------------|:-----------------|:-----------------|:------------------|:-------------|:-------------|:---------------|:-------------|:-------------|:-------------|:------------| +| GUID | 0x2708A000 | 0x00000000 | 0x00000000 | 0x00000000 | 0x00001200 | 0x00001100 | 0x00002000 | 0x00003000 | 0x00003100 | 0x00002100 | 0x00002300 | 0x00002000 | 0x00005000 | 0x00AEC000 | 0x00001000 | +| GSNPSID | 0x4F54280A | 0x4F54330A | 0x4F54400A | 0x4F54400A | 0x4F54281A | 0x4F54281A | 0x4F54320A | 0x4F54330A | 0x4F54330A | 0x4F54320A | 0x4F54330A | 0x4F54310A | 0x4F54411A | 0x4F54292A | 0x00000000 | +| - specs version | 2.80a | 3.30a | 4.00a | 4.00a | 2.81a | 2.81a | 3.20a | 3.30a | 3.30a | 3.20a | 3.30a | 3.10a | 4.11a | 2.92a | 0.00W | +| GHWCFG1 | 0x00000000 | 0x00000000 | 0x00000000 | 0x00000000 | 0x00000000 | 0x00000000 | 0x00000000 | 0x00000000 | 0x00000000 | 0x00000000 | 0x00000000 | 0x00000000 | 0x00000000 | 0x00000000 | 0x00000000 | +| GHWCFG2 | 0x228DDD50 | 0x228F5910 | 0x224DD930 | 0x215FFFD0 | 0x229DCD20 | 0x229ED590 | 0x229ED520 | 0x229ED520 | 0x229FE1D0 | 0x229FE190 | 0x229FE190 | 0x229ED520 | 0x228FE052 | 0x228F5930 | 0x00000000 | +| - op_mode | HNP SRP | HNP SRP | HNP SRP | HNP SRP | HNP SRP | HNP SRP | HNP SRP | HNP SRP | HNP SRP | HNP SRP | HNP SRP | HNP SRP | noHNP noSRP | HNP SRP | HNP SRP | +| - arch | DMA internal | DMA internal | DMA internal | DMA internal | Slave only | DMA internal | Slave only | Slave only | DMA internal | DMA internal | DMA internal | Slave only | DMA internal | DMA internal | Slave only | +| - single_point | hub | hub | n/a | hub | n/a | hub | n/a | n/a | hub | hub | hub | n/a | hub | n/a | hub | +| - hs_phy_type | UTMI+ | n/a | n/a | UTMI+/ULPI | n/a | ULPI | n/a | n/a | UTMI+/ULPI | ULPI | ULPI | n/a | UTMI+ | n/a | n/a | +| - fs_phy_type | Dedicated | Dedicated | Dedicated | Shared ULPI | Dedicated | Dedicated | Dedicated | Dedicated | Dedicated | Dedicated | Dedicated | Dedicated | n/a | Dedicated | n/a | +| - num_dev_ep | 7 | 6 | 6 | 15 | 3 | 5 | 5 | 5 | 8 | 8 | 8 | 5 | 8 | 6 | 0 | +| - num_host_ch | 7 | 13 | 7 | 15 | 7 | 11 | 11 | 11 | 15 | 15 | 15 | 11 | 15 | 13 | 0 | +| - period_channel_support | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 0 | +| - enable_dynamic_fifo | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 0 | +| - mul_proc_intrpt | 0 | 0 | 0 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 0 | 0 | 0 | +| - reserved21 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | +| - nptx_q_depth | 8 | 8 | 4 | 4 | 8 | 8 | 8 | 8 | 8 | 8 | 8 | 8 | 8 | 8 | 2 | +| - ptx_q_depth | 8 | 8 | 8 | 4 | 8 | 8 | 8 | 8 | 8 | 8 | 8 | 8 | 8 | 8 | 2 | +| - token_q_depth | 8 | 8 | 8 | 8 | 8 | 8 | 8 | 8 | 8 | 8 | 8 | 8 | 8 | 8 | 0 | +| - otg_enable_ic_usb | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | +| GHWCFG3 | 0x0FF000E8 | 0x01F204E8 | 0x00C804B5 | 0x03805EB5 | 0x020001E8 | 0x03F403E8 | 0x0200D1E8 | 0x0200D1E8 | 0x03EED2E8 | 0x03EED2E8 | 0x03B8D2E8 | 0x0200D1E8 | 0x03B882E8 | 0x027A01E5 | 0x00000000 | +| - xfer_size_width | 8 | 8 | 5 | 5 | 8 | 8 | 8 | 8 | 8 | 8 | 8 | 8 | 8 | 5 | 0 | +| - packet_size_width | 6 | 6 | 3 | 3 | 6 | 6 | 6 | 6 | 6 | 6 | 6 | 6 | 6 | 6 | 0 | +| - otg_enable | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 0 | +| - i2c_enable | 0 | 0 | 0 | 0 | 1 | 1 | 1 | 1 | 0 | 0 | 0 | 1 | 0 | 1 | 0 | +| - vendor_ctrl_itf | 0 | 0 | 0 | 1 | 0 | 1 | 0 | 0 | 1 | 1 | 1 | 0 | 1 | 0 | 0 | +| - optional_feature_removed | 0 | 1 | 1 | 1 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | +| - synch_reset | 0 | 0 | 0 | 1 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | +| - otg_adp_support | 0 | 0 | 0 | 1 | 0 | 0 | 1 | 1 | 1 | 1 | 1 | 1 | 0 | 0 | 0 | +| - otg_enable_hsic | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | +| - battery_charger_support | 0 | 0 | 0 | 1 | 0 | 0 | 1 | 1 | 1 | 1 | 1 | 1 | 0 | 0 | 0 | +| - lpm_mode | 0 | 0 | 0 | 0 | 0 | 0 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 0 | 0 | +| - dfifo_depth | 4080 | 498 | 200 | 896 | 512 | 1012 | 512 | 512 | 1006 | 1006 | 952 | 512 | 952 | 634 | 0 | +| GHWCFG4 | 0x1FF00020 | 0x1BF08030 | 0xD3F0A030 | 0xDFF1A030 | 0x0FF08030 | 0x17F00030 | 0x17F08030 | 0x17F08030 | 0x23F00030 | 0x23F00030 | 0xE3F00030 | 0x17F08030 | 0xE2103E30 | 0xDBF08030 | 0x00000000 | +| - num_dev_period_in_ep | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | +| - partial_powerdown | 0 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 0 | +| - ahb_freq_min | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 0 | +| - hibernation | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | +| - extended_hibernation | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | +| - reserved8 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | +| - enhanced_lpm_support1 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 1 | 0 | 0 | +| - service_interval_flow | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 1 | 0 | 0 | +| - ipg_isoc_support | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 1 | 0 | 0 | +| - acg_support | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 1 | 0 | 0 | +| - enhanced_lpm_support | 0 | 0 | 1 | 1 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 1 | 0 | 0 | +| - phy_data_width | 8 bit | 8/16 bit | 8/16 bit | 8/16 bit | 8/16 bit | 8 bit | 8/16 bit | 8/16 bit | 8 bit | 8 bit | 8 bit | 8/16 bit | 8 bit | 8/16 bit | 8 bit | +| - ctrl_ep_num | 0 | 0 | 0 | 1 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | +| - iddg_filter | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 0 | +| - vbus_valid_filter | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 0 | 1 | 0 | +| - a_valid_filter | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 0 | 1 | 0 | +| - b_valid_filter | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 0 | 1 | 0 | +| - session_end_filter | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 0 | 1 | 0 | +| - dedicated_fifos | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 0 | +| - num_dev_in_eps | 7 | 6 | 4 | 7 | 3 | 5 | 5 | 5 | 8 | 8 | 8 | 5 | 8 | 6 | 0 | +| - dma_desc_enable | 0 | 0 | 1 | 1 | 0 | 0 | 0 | 0 | 0 | 0 | 1 | 0 | 1 | 1 | 0 | +| - dma_desc_dynamic | 0 | 0 | 1 | 1 | 0 | 0 | 0 | 0 | 0 | 0 | 1 | 0 | 1 | 1 | 0 | diff --git a/src/portable/synopsys/dwc2/dwc2_info.py b/src/portable/synopsys/dwc2/dwc2_info.py index 5884cd455..25edcf22d 100755 --- a/src/portable/synopsys/dwc2/dwc2_info.py +++ b/src/portable/synopsys/dwc2/dwc2_info.py @@ -15,15 +15,15 @@ dwc2_reg_value = { 'ESP32-P4': [0, 0x4F54400A, 0, 0x215FFFD0, 0x03805EB5, 0xDFF1A030], 'ST F207/F407/411/429 FS': [0x1200, 0x4F54281A, 0, 0x229DCD20, 0x020001E8, 0x0FF08030], 'ST F407/429 HS': [0x1100, 0x4F54281A, 0, 0x229ED590, 0x03F403E8, 0x17F00030], - 'ST F412/767 FS': [0x2000, 0x4F54320A, 0, 0x229ED520, 0x0200D1E8, 0x17F08030], + 'ST F412/76x FS': [0x2000, 0x4F54320A, 0, 0x229ED520, 0x0200D1E8, 0x17F08030], 'ST F723/L4P5 FS': [0x3000, 0x4F54330A, 0, 0x229ED520, 0x0200D1E8, 0x17F08030], 'ST F723 HS': [0x3100, 0x4F54330A, 0, 0x229FE1D0, 0x03EED2E8, 0x23F00030], - 'ST F769': [0x2100, 0x4F54320A, 0, 0x229FE190, 0x03EED2E8, 0x23F00030], + 'ST F76x HS': [0x2100, 0x4F54320A, 0, 0x229FE190, 0x03EED2E8, 0x23F00030], 'ST H743/H750': [0x2300, 0x4F54330A, 0, 0x229FE190, 0x03B8D2E8, 0xE3F00030], 'ST L476 FS': [0x2000, 0x4F54310A, 0, 0x229ED520, 0x0200D1E8, 0x17F08030], 'ST U5A5 HS': [0x5000, 0x4F54411A, 0, 0x228FE052, 0x03B882E8, 0xE2103E30], + 'XMC4500': [0xAEC000, 0x4F54292A, 0, 0x228F5930, 0x027A01E5, 0xDBF08030], 'GD32VF103': [0x1000, 0, 0, 0, 0, 0], - 'XMC4500': [0xAEC000, 0x4F54292A, 0, 0x228F5930, 0x027A01E5, 0xDBF08030] } # Combine dwc2_info with dwc2_reg_list diff --git a/test/hil/tinyusb.json b/test/hil/tinyusb.json index c92224e26..f5a3f109e 100644 --- a/test/hil/tinyusb.json +++ b/test/hil/tinyusb.json @@ -3,9 +3,6 @@ { "name": "espressif_p4_function_ev", "uid": "6055F9F98715", - "build" : { - "flags_on": ["", "CFG_TUD_DWC2_DMA"] - }, "tests": { "only": ["device/cdc_msc_freertos", "device/hid_composite_freertos"] }, @@ -98,9 +95,6 @@ { "name": "stm32f407disco", "uid": "30001A000647313332353735", - "build" : { - "flags_on": ["", "CFG_TUD_DWC2_DMA"] - }, "flasher": "jlink", "flasher_sn": "000773661813", "flasher_args": "-device stm32f407vg" -- cgit v1.3.1 From d8970506a6999bb838fd61cdd1e97f57843d3f2d Mon Sep 17 00:00:00 2001 From: hathach Date: Mon, 11 Nov 2024 17:33:02 +0700 Subject: hil replace f407disco by h743nucleo --- test/hil/tinyusb.json | 20 +++++++++++++++----- 1 file changed, 15 insertions(+), 5 deletions(-) (limited to 'test/hil') diff --git a/test/hil/tinyusb.json b/test/hil/tinyusb.json index f5a3f109e..ea5345126 100644 --- a/test/hil/tinyusb.json +++ b/test/hil/tinyusb.json @@ -93,11 +93,14 @@ "flasher_args": "-device stm32f072rb" }, { - "name": "stm32f407disco", - "uid": "30001A000647313332353735", - "flasher": "jlink", - "flasher_sn": "000773661813", - "flasher_args": "-device stm32f407vg" + "name": "stm32h743nucleo", + "uid": "110018000951383432343236", + "build" : { + "flags_on": ["", "CFG_TUD_DWC2_DMA"] + }, + "flasher": "stlink", + "flasher_sn": "004C00343137510F39383538", + "flasher_args": "" }, { "name": "stm32g0b1nucleo", @@ -131,6 +134,13 @@ "flasher": "openocd_wch", "flasher_sn": "EBCA8F0670AF", "flasher_args": "" + }, + { + "name": "stm32f407disco", + "uid": "30001A000647313332353735", + "flasher": "jlink", + "flasher_sn": "000773661813", + "flasher_args": "-device stm32f407vg" } ] } -- cgit v1.3.1 From 3c564fd947bbaa9042930afc83ed1afd5a073242 Mon Sep 17 00:00:00 2001 From: hathach Date: Mon, 11 Nov 2024 18:40:31 +0700 Subject: try adding host test for p4 --- test/hil/hil_test.py | 44 ++++++++++++++++++++++++++++++++++++++------ test/hil/tinyusb.json | 8 ++++---- 2 files changed, 42 insertions(+), 10 deletions(-) (limited to 'test/hil') diff --git a/test/hil/hil_test.py b/test/hil/hil_test.py index 0d7cae77e..4a0510223 100755 --- a/test/hil/hil_test.py +++ b/test/hil/hil_test.py @@ -224,14 +224,42 @@ def flash_uniflash(board, firmware): # ------------------------------------------------------------- # Tests: dual # ------------------------------------------------------------- - def test_dual_host_info_to_device_cdc(board): uid = board['uid'] - declared_devs = [f'{d["vid_pid"]}_{d["serial"]}' for d in board['tests']['dual_attached']] + declared_devs = [f'{d["vid_pid"]}_{d["serial"]}' for d in board['tests']['dev_attached']] + + port = get_serial_dev(board["flasher_sn"], None, None, 0) + ser = open_serial_dev(port) + # read from serial, first line should contain vid/pid and serial + data = ser.read(1000) + lines = data.decode('utf-8').splitlines() + enum_dev_sn = [] + for l in lines: + vid_pid_sn = re.search(r'ID ([0-9a-fA-F]+):([0-9a-fA-F]+) SN (\w+)', l) + if vid_pid_sn: + print(f'\r\n {l} ', end='') + enum_dev_sn.append(f'{vid_pid_sn.group(1)}_{vid_pid_sn.group(2)}_{vid_pid_sn.group(3)}') + + if set(declared_devs) != set(enum_dev_sn): + # for pico/pico2 make this test optional + failed_msg = f'Enumerated devices {enum_dev_sn} not match with declared {declared_devs}' + if 'raspberry_pi_pico' in board['name']: + print(f'\r\n {failed_msg} {STATUS_FAILED} ', end='') + else: + assert False, failed_msg + return 0 + + +# ------------------------------------------------------------- +# Tests: host +# ------------------------------------------------------------- +def test_host_cdc_msc_hid(board): + uid = board['uid'] + declared_devs = [f'{d["vid_pid"]}_{d["serial"]}' for d in board['tests']['dev_attached']] port = get_serial_dev(uid, 'TinyUSB', "TinyUSB_Device", 0) ser = open_serial_dev(port) - # read from cdc, first line should contain vid/pid and serial + # read from serial, first line should contain vid/pid and serial data = ser.read(1000) lines = data.decode('utf-8').splitlines() enum_dev_sn = [] @@ -251,6 +279,10 @@ def test_dual_host_info_to_device_cdc(board): return 0 +def test_host_cdc_msc_hid_freertos(board): + test_host_cdc_msc_hid(board) + + # ------------------------------------------------------------- # Tests: device # ------------------------------------------------------------- @@ -397,7 +429,7 @@ device_tests = [ 'device/hid_boot_interface', ] -dual_tests = [ +host_tests = [ 'dual/host_info_to_device_cdc', ] @@ -411,8 +443,8 @@ def test_board(board): if 'tests' in board: board_tests = board['tests'] - if 'dual_attached' in board_tests: - test_list += dual_tests + if 'dev_attached' in board_tests: + test_list += host_tests if 'only' in board_tests: test_list = board_tests['only'] if 'skip' in board_tests: diff --git a/test/hil/tinyusb.json b/test/hil/tinyusb.json index ea5345126..1b0b7c99a 100644 --- a/test/hil/tinyusb.json +++ b/test/hil/tinyusb.json @@ -4,7 +4,7 @@ "name": "espressif_p4_function_ev", "uid": "6055F9F98715", "tests": { - "only": ["device/cdc_msc_freertos", "device/hid_composite_freertos"] + "only": ["device/cdc_msc_freertos", "device/hid_composite_freertos", "host/cdc_msc_hid_freertos"] }, "flasher": "esptool", "flasher_sn": "4ea4f48f6bc3ee11bbb9d00f9e1b1c54", @@ -44,7 +44,7 @@ "flasher_sn": "123456", "flasher_args": "-device ATSAMD51J19", "tests": { - "dual_attached": [{"vid_pid": "1a86_55d4", "serial": "52D2002130"}] + "dev_attached": [{"vid_pid": "1a86_55d4", "serial": "52D2002130"}] } }, { @@ -72,7 +72,7 @@ "flasher_sn": "E6614103E72C1D2F", "flasher_args": "-f interface/cmsis-dap.cfg -f target/rp2040.cfg -c \"adapter speed 5000\"", "tests": { - "dual_attached": [{"vid_pid": "1a86_55d4", "serial": "52D2002470"}] + "dev_attached": [{"vid_pid": "1a86_55d4", "serial": "52D2002470"}] } }, { @@ -82,7 +82,7 @@ "flasher_sn": "E6633861A3978538", "flasher_args": "-f interface/cmsis-dap.cfg -f target/rp2350.cfg -c \"adapter speed 5000\"", "tests": { - "dual_attached": [{"vid_pid": "1a86_55d4", "serial": "533D004242"}] + "dev_attached": [{"vid_pid": "1a86_55d4", "serial": "533D004242"}] } }, { -- cgit v1.3.1 From e391e33492b0051d4961909d0763f44918ab8048 Mon Sep 17 00:00:00 2001 From: hathach Date: Tue, 12 Nov 2024 19:00:00 +0700 Subject: update host/device_info to build with freertos for espressif board. Add hil test for host/device_info --- examples/host/device_info/only.txt | 3 + examples/host/device_info/src/CMakeLists.txt | 4 + examples/host/device_info/src/main.c | 155 +++++++++++++++++++++------ examples/host/device_info/src/tusb_config.h | 5 + test/hil/hil_test.py | 25 ++--- test/hil/tinyusb.json | 3 +- tools/build.py | 1 + 7 files changed, 150 insertions(+), 46 deletions(-) create mode 100644 examples/host/device_info/src/CMakeLists.txt (limited to 'test/hil') diff --git a/examples/host/device_info/only.txt b/examples/host/device_info/only.txt index f06d4df00..b6f87f423 100644 --- a/examples/host/device_info/only.txt +++ b/examples/host/device_info/only.txt @@ -1,3 +1,6 @@ +mcu:ESP32S2 +mcu:ESP32S3 +mcu:ESP32P4 mcu:KINETIS_KL mcu:LPC175X_6X mcu:LPC177X_8X diff --git a/examples/host/device_info/src/CMakeLists.txt b/examples/host/device_info/src/CMakeLists.txt new file mode 100644 index 000000000..1908a32c3 --- /dev/null +++ b/examples/host/device_info/src/CMakeLists.txt @@ -0,0 +1,4 @@ +# This file is for ESP-IDF only +idf_component_register(SRCS "main.c" + INCLUDE_DIRS "." + REQUIRES boards tinyusb_src) diff --git a/examples/host/device_info/src/main.c b/examples/host/device_info/src/main.c index 0ff4f32e9..6591a0198 100644 --- a/examples/host/device_info/src/main.c +++ b/examples/host/device_info/src/main.c @@ -24,7 +24,7 @@ */ /* Host example will get device descriptors of attached devices and print it out via uart/rtt (logger) as follows: - * Device 1: ID 046d:c52f + * Device 1: ID 046d:c52f SN 11223344 Device Descriptor: bLength 18 bDescriptorType 1 @@ -56,15 +56,20 @@ //--------------------------------------------------------------------+ // MACRO CONSTANT TYPEDEF PROTYPES //--------------------------------------------------------------------+ -void led_blinking_task(void); -static void print_utf16(uint16_t* temp_buf, size_t buf_len); -/*------------- MAIN -------------*/ -int main(void) { - board_init(); +static uint32_t blink_interval_ms = 1000; - printf("TinyUSB Device Info Example\r\n"); +void led_blinking_task(void* param); +static void print_utf16(uint16_t* temp_buf, size_t buf_len); + +#if CFG_TUSB_OS == OPT_OS_FREERTOS +void init_freertos_task(void); +#endif +//-------------------------------------------------------------------- +// Main +//-------------------------------------------------------------------- +void init_tinyusb(void) { // init host stack on configured roothub port tusb_rhport_init_t host_init = { .role = TUSB_ROLE_HOST, @@ -75,14 +80,22 @@ int main(void) { if (board_init_after_tusb) { board_init_after_tusb(); } +} + +int main(void) { + board_init(); + printf("TinyUSB Device Info Example\r\n"); +#if CFG_TUSB_OS == OPT_OS_FREERTOS + init_freertos_task(); +#else + init_tinyusb(); while (1) { - // tinyusb host task - tuh_task(); + tuh_task(); // tinyusb host task led_blinking_task(); } - return 0; +#endif } /*------------- TinyUSB Callbacks -------------*/ @@ -97,9 +110,20 @@ void tuh_mount_cb(uint8_t daddr) { return; } + uint16_t serial[64]; uint16_t buf[256]; - printf("Device %u: ID %04x:%04x\r\n", daddr, desc_device.idVendor, desc_device.idProduct); + printf("Device %u: ID %04x:%04x SN ", daddr, desc_device.idVendor, desc_device.idProduct); + xfer_result = tuh_descriptor_get_serial_string_sync(daddr, LANGUAGE_ID, serial, sizeof(serial)); + if (XFER_RESULT_SUCCESS != xfer_result) { + serial[0] = 'n'; + serial[1] = '/'; + serial[2] = 'a'; + serial[3] = 0; + } + print_utf16(serial, TU_ARRAY_SIZE(serial)); + printf("\r\n"); + printf("Device Descriptor:\r\n"); printf(" bLength %u\r\n", desc_device.bLength); printf(" bDescriptorType %u\r\n", desc_device.bDescriptorType); @@ -129,37 +153,17 @@ void tuh_mount_cb(uint8_t daddr) { printf("\r\n"); printf(" iSerialNumber %u ", desc_device.iSerialNumber); - xfer_result = tuh_descriptor_get_serial_string_sync(daddr, LANGUAGE_ID, buf, sizeof(buf)); - if (XFER_RESULT_SUCCESS == xfer_result) { - print_utf16(buf, TU_ARRAY_SIZE(buf)); - } + printf((char*)serial); // serial is already to UTF-8 printf("\r\n"); printf(" bNumConfigurations %u\r\n", desc_device.bNumConfigurations); } -/// Invoked when device is unmounted (bus reset/unplugged) +// Invoked when device is unmounted (bus reset/unplugged) void tuh_umount_cb(uint8_t daddr) { printf("Device removed, address = %d\r\n", daddr); } -//--------------------------------------------------------------------+ -// Blinking Task -//--------------------------------------------------------------------+ -void led_blinking_task(void) { - const uint32_t interval_ms = 1000; - static uint32_t start_ms = 0; - - static bool led_state = false; - - // Blink every interval ms - if (board_millis() - start_ms < interval_ms) return; // not enough time - start_ms += interval_ms; - - board_led_write(led_state); - led_state = 1 - led_state; // toggle -} - //--------------------------------------------------------------------+ // String Descriptor Helper //--------------------------------------------------------------------+ @@ -212,3 +216,88 @@ static void print_utf16(uint16_t* temp_buf, size_t buf_len) { printf("%s", (char*) temp_buf); } + +//--------------------------------------------------------------------+ +// Blinking Task +//--------------------------------------------------------------------+ +void led_blinking_task(void* param) { + (void) param; + static uint32_t start_ms = 0; + static bool led_state = false; + + while (1) { +#if CFG_TUSB_OS == OPT_OS_FREERTOS + if (blink_interval_ms == 0) { + vTaskSuspend(NULL); + } else { + vTaskDelay(blink_interval_ms / portTICK_PERIOD_MS); + } +#else + if (blink_interval_ms == 0) { + return; + } + if (board_millis() - start_ms < blink_interval_ms) { + return; // not enough time + } +#endif + + start_ms += blink_interval_ms; + board_led_write(led_state); + led_state = 1 - led_state; // toggle + } +} + +//--------------------------------------------------------------------+ +// FreeRTOS +//--------------------------------------------------------------------+ +#if CFG_TUSB_OS == OPT_OS_FREERTOS + +#define BLINKY_STACK_SIZE configMINIMAL_STACK_SIZE + +#if TUSB_MCU_VENDOR_ESPRESSIF + #define USB_STACK_SIZE 4096 +#else + // Increase stack size when debug log is enabled + #define USB_STACK_SIZE (3*configMINIMAL_STACK_SIZE/2) * (CFG_TUSB_DEBUG ? 2 : 1) +#endif + + +// static task +#if configSUPPORT_STATIC_ALLOCATION +StackType_t blinky_stack[BLINKY_STACK_SIZE]; +StaticTask_t blinky_taskdef; + +StackType_t usb_stack[USB_STACK_SIZE]; +StaticTask_t usb_taskdef; +#endif + +#if TUSB_MCU_VENDOR_ESPRESSIF +void app_main(void) { + main(); +} +#endif + +void usb_host_task(void *param) { + (void) param; + init_tinyusb(); + while (1) { + tuh_task(); + } +} + +void init_freertos_task(void) { +#if configSUPPORT_STATIC_ALLOCATION + xTaskCreateStatic(led_blinking_task, "blinky", BLINKY_STACK_SIZE, NULL, 1, blinky_stack, &blinky_taskdef); + xTaskCreateStatic(usb_host_task, "usbh", USB_STACK_SIZE, NULL, configMAX_PRIORITIES-1, usb_stack, &usb_taskdef); +#else + xTaskCreate(led_blinking_task, "blinky", BLINKY_STACK_SIZE, NULL, 1, NULL); + xTaskCreate(usb_host_task, "usbh", USB_STACK_SIZE, NULL, configMAX_PRIORITIES - 1, NULL); +#endif + + // skip starting scheduler (and return) for ESP32-S2 or ESP32-S3 +#if !TUSB_MCU_VENDOR_ESPRESSIF + vTaskStartScheduler(); +#endif +} + +#endif diff --git a/examples/host/device_info/src/tusb_config.h b/examples/host/device_info/src/tusb_config.h index 2e9731eaf..5190b5b1f 100644 --- a/examples/host/device_info/src/tusb_config.h +++ b/examples/host/device_info/src/tusb_config.h @@ -39,6 +39,11 @@ #error CFG_TUSB_MCU must be defined #endif +// Espressif IDF requires "freertos/" prefix in include path +#if TUSB_MCU_VENDOR_ESPRESSIF +#define CFG_TUSB_OS_INC_PATH freertos/ +#endif + #ifndef CFG_TUSB_OS #define CFG_TUSB_OS OPT_OS_NONE #endif diff --git a/test/hil/hil_test.py b/test/hil/hil_test.py index 4a0510223..91fe6b67c 100755 --- a/test/hil/hil_test.py +++ b/test/hil/hil_test.py @@ -50,6 +50,7 @@ verbose = False # Path # ------------------------------------------------------------- OPENCOD_ADI_PATH = f'{os.getenv("HOME")}/app/openocd_adi' +TINYUSB_ROOT = os.path.dirname(os.path.dirname(os.path.dirname(os.path.abspath(__file__)))) # get usb serial by id def get_serial_dev(id, vendor_str, product_str, ifnum): @@ -83,7 +84,7 @@ def open_serial_dev(port): # slight delay since kernel may occupy the port briefly time.sleep(0.5) timeout = timeout - 0.5 - ser = serial.Serial(port, timeout=5) + ser = serial.Serial(port, baudrate=115200, timeout=5) break except serial.SerialException: pass @@ -212,6 +213,7 @@ def flash_esptool(board, firmware): flash_args = f.read().strip().replace('\n', ' ') command = (f'esptool.py --chip {idf_target} -p {port} {board["flasher_args"]} ' f'--before=default_reset --after=hard_reset write_flash {flash_args}') + # command = f'echo abc' ret = run_cmd(command, cwd=fw_dir) return ret @@ -228,7 +230,7 @@ def test_dual_host_info_to_device_cdc(board): uid = board['uid'] declared_devs = [f'{d["vid_pid"]}_{d["serial"]}' for d in board['tests']['dev_attached']] - port = get_serial_dev(board["flasher_sn"], None, None, 0) + port = get_serial_dev(uid, 'TinyUSB', "TinyUSB_Device", 0) ser = open_serial_dev(port) # read from serial, first line should contain vid/pid and serial data = ser.read(1000) @@ -253,14 +255,16 @@ def test_dual_host_info_to_device_cdc(board): # ------------------------------------------------------------- # Tests: host # ------------------------------------------------------------- -def test_host_cdc_msc_hid(board): +def test_host_device_info(board): uid = board['uid'] declared_devs = [f'{d["vid_pid"]}_{d["serial"]}' for d in board['tests']['dev_attached']] - port = get_serial_dev(uid, 'TinyUSB', "TinyUSB_Device", 0) + port = get_serial_dev(board["flasher_sn"], None, None, 0) ser = open_serial_dev(port) - # read from serial, first line should contain vid/pid and serial data = ser.read(1000) + if len(data) == 0: + assert False, 'No data from device' + lines = data.decode('utf-8').splitlines() enum_dev_sn = [] for l in lines: @@ -276,11 +280,8 @@ def test_host_cdc_msc_hid(board): print(f'\r\n {failed_msg} {STATUS_FAILED} ', end='') else: assert False, failed_msg - return 0 - -def test_host_cdc_msc_hid_freertos(board): - test_host_cdc_msc_hid(board) + return 0 # ------------------------------------------------------------- @@ -454,7 +455,7 @@ def test_board(board): print(f'{name:25} {skip:30} ... Skip') # board_test is added last to disable board's usb - test_list.append('device/board_test') + #test_list.append('device/board_test') err_count = 0 flags_on_list = [""] @@ -466,9 +467,9 @@ def test_board(board): if f1 != "": f1_str = '-' + f1.replace(' ', '-') for test in test_list: - fw_dir = f'cmake-build/cmake-build-{name}{f1_str}/{test}' + fw_dir = f'{TINYUSB_ROOT}/cmake-build/cmake-build-{name}{f1_str}/{test}' if not os.path.exists(fw_dir): - fw_dir = f'examples/cmake-build-{name}{f1_str}/{test}' + fw_dir = f'{TINYUSB_ROOT}/examples/cmake-build-{name}{f1_str}/{test}' fw_name = f'{fw_dir}/{os.path.basename(test)}' print(f'{name+f1_str:40} {test:30} ... ', end='') diff --git a/test/hil/tinyusb.json b/test/hil/tinyusb.json index 1b0b7c99a..2d61981f2 100644 --- a/test/hil/tinyusb.json +++ b/test/hil/tinyusb.json @@ -4,7 +4,8 @@ "name": "espressif_p4_function_ev", "uid": "6055F9F98715", "tests": { - "only": ["device/cdc_msc_freertos", "device/hid_composite_freertos", "host/cdc_msc_hid_freertos"] + "only": ["device/cdc_msc_freertos", "device/hid_composite_freertos", "host/device_info"], + "dev_attached": [{"vid_pid": "1a86_55d4", "serial": "52D2002427"}] }, "flasher": "esptool", "flasher_sn": "4ea4f48f6bc3ee11bbb9d00f9e1b1c54", diff --git a/tools/build.py b/tools/build.py index 91d4ebd30..48666adc4 100755 --- a/tools/build.py +++ b/tools/build.py @@ -68,6 +68,7 @@ def get_examples(family): if family == 'espressif': all_examples.append('device/board_test') all_examples.append('device/video_capture') + all_examples.append('host/device_info') all_examples.sort() return all_examples -- cgit v1.3.1 From aeae2966a2afa669068e54eef7c4dd2dceffaa0d Mon Sep 17 00:00:00 2001 From: hathach Date: Wed, 13 Nov 2024 13:08:30 +0700 Subject: hil add stm32f723disco, add test flags for device/host/dual --- examples/device/cdc_msc/CMakeLists.txt | 2 +- examples/host/device_info/src/main.c | 20 +-- hw/bsp/stm32f7/boards/stm32f723disco/board.cmake | 6 +- hw/bsp/stm32f7/boards/stm32f723disco/board.mk | 5 +- hw/bsp/stm32f7/family.c | 29 +++-- src/portable/synopsys/dwc2/hcd_dwc2.c | 6 +- test/hil/hil_test.py | 147 ++++++++++++++++------- test/hil/tinyusb.json | 69 +++++++++-- 8 files changed, 200 insertions(+), 84 deletions(-) (limited to 'test/hil') diff --git a/examples/device/cdc_msc/CMakeLists.txt b/examples/device/cdc_msc/CMakeLists.txt index 9415f8c68..c2f9cb095 100644 --- a/examples/device/cdc_msc/CMakeLists.txt +++ b/examples/device/cdc_msc/CMakeLists.txt @@ -1,5 +1,5 @@ cmake_minimum_required(VERSION 3.17) -set_property(GLOBAL PROPERTY USE_FOLDERS ON) +#set_property(GLOBAL PROPERTY USE_FOLDERS ON) include(${CMAKE_CURRENT_SOURCE_DIR}/../../../hw/bsp/family_support.cmake) diff --git a/examples/host/device_info/src/main.c b/examples/host/device_info/src/main.c index 8e0185878..70304e449 100644 --- a/examples/host/device_info/src/main.c +++ b/examples/host/device_info/src/main.c @@ -56,8 +56,12 @@ //--------------------------------------------------------------------+ // MACRO CONSTANT TYPEDEF PROTYPES //--------------------------------------------------------------------+ - -static uint32_t blink_interval_ms = 1000; +enum { + BLINK_NOT_MOUNTED = 250, + BLINK_MOUNTED = 1000, + BLINK_SUSPENDED = 2500, +}; +static uint32_t blink_interval_ms = BLINK_NOT_MOUNTED; void led_blinking_task(void* param); static void print_utf16(uint16_t* temp_buf, size_t buf_len); @@ -102,6 +106,8 @@ int main(void) { // Invoked when device is mounted (configured) void tuh_mount_cb(uint8_t daddr) { + blink_interval_ms = BLINK_MOUNTED; + // Get Device Descriptor tusb_desc_device_t desc_device; uint8_t xfer_result = tuh_descriptor_get_device_sync(daddr, &desc_device, 18); @@ -161,6 +167,7 @@ void tuh_mount_cb(uint8_t daddr) { // Invoked when device is unmounted (bus reset/unplugged) void tuh_umount_cb(uint8_t daddr) { + blink_interval_ms = BLINK_NOT_MOUNTED; printf("Device removed, address = %d\r\n", daddr); } @@ -227,15 +234,8 @@ void led_blinking_task(void* param) { while (1) { #if CFG_TUSB_OS == OPT_OS_FREERTOS - if (blink_interval_ms == 0) { - vTaskSuspend(NULL); - } else { - vTaskDelay(blink_interval_ms / portTICK_PERIOD_MS); - } + vTaskDelay(blink_interval_ms / portTICK_PERIOD_MS); #else - if (blink_interval_ms == 0) { - return; - } if (board_millis() - start_ms < blink_interval_ms) { return; // not enough time } diff --git a/hw/bsp/stm32f7/boards/stm32f723disco/board.cmake b/hw/bsp/stm32f7/boards/stm32f723disco/board.cmake index 5655c217e..eb3ed407b 100644 --- a/hw/bsp/stm32f7/boards/stm32f723disco/board.cmake +++ b/hw/bsp/stm32f7/boards/stm32f723disco/board.cmake @@ -5,12 +5,12 @@ set(LD_FILE_GNU ${CMAKE_CURRENT_LIST_DIR}/STM32F723xE_FLASH.ld) set(RHPORT_SPEED OPT_MODE_FULL_SPEED OPT_MODE_HIGH_SPEED) -# device default to PORT 1 High Speed +# For Hardware test: device default to PORT 0, Host to port 1 if (NOT DEFINED RHPORT_DEVICE) - set(RHPORT_DEVICE 1) + set(RHPORT_DEVICE 0) endif() if (NOT DEFINED RHPORT_HOST) - set(RHPORT_HOST 0) + set(RHPORT_HOST 1) endif() function(update_board TARGET) diff --git a/hw/bsp/stm32f7/boards/stm32f723disco/board.mk b/hw/bsp/stm32f7/boards/stm32f723disco/board.mk index eb6799eb0..9b8e7a969 100644 --- a/hw/bsp/stm32f7/boards/stm32f723disco/board.mk +++ b/hw/bsp/stm32f7/boards/stm32f723disco/board.mk @@ -1,8 +1,9 @@ MCU_VARIANT = stm32f723xx +# For Hardware test: device default to PORT 0, Host to port 1 RHPORT_SPEED = OPT_MODE_FULL_SPEED OPT_MODE_HIGH_SPEED -RHPORT_DEVICE ?= 1 -RHPORT_HOST ?= 0 +RHPORT_DEVICE ?= 0 +RHPORT_HOST ?= 1 CFLAGS += \ -DSTM32F723xx \ diff --git a/hw/bsp/stm32f7/family.c b/hw/bsp/stm32f7/family.c index 61beac47e..527fbfe5c 100644 --- a/hw/bsp/stm32f7/family.c +++ b/hw/bsp/stm32f7/family.c @@ -37,6 +37,25 @@ typedef struct { #include "board.h" +//--------------------------------------------------------------------+ +// MACRO TYPEDEF CONSTANT ENUM +//--------------------------------------------------------------------+ + +#ifdef UART_DEV +UART_HandleTypeDef UartHandle = { + .Instance = UART_DEV, + .Init = { + .BaudRate = CFG_BOARD_UART_BAUDRATE, + .WordLength = UART_WORDLENGTH_8B, + .StopBits = UART_STOPBITS_1, + .Parity = UART_PARITY_NONE, + .HwFlowCtl = UART_HWCONTROL_NONE, + .Mode = UART_MODE_TX_RX, + .OverSampling = UART_OVERSAMPLING_16, + } +}; +#endif + //--------------------------------------------------------------------+ // Forward USB interrupt events to TinyUSB IRQ Handler //--------------------------------------------------------------------+ @@ -54,8 +73,6 @@ void OTG_HS_IRQHandler(void) { // MACRO TYPEDEF CONSTANT ENUM //--------------------------------------------------------------------+ -UART_HandleTypeDef UartHandle; - void board_init(void) { board_clock_init(); @@ -89,14 +106,6 @@ void board_init(void) { #endif #ifdef UART_DEV - UartHandle.Instance = UART_DEV; - UartHandle.Init.BaudRate = CFG_BOARD_UART_BAUDRATE; - UartHandle.Init.WordLength = UART_WORDLENGTH_8B; - UartHandle.Init.StopBits = UART_STOPBITS_1; - UartHandle.Init.Parity = UART_PARITY_NONE; - UartHandle.Init.HwFlowCtl = UART_HWCONTROL_NONE; - UartHandle.Init.Mode = UART_MODE_TX_RX; - UartHandle.Init.OverSampling = UART_OVERSAMPLING_16; HAL_UART_Init(&UartHandle); #endif diff --git a/src/portable/synopsys/dwc2/hcd_dwc2.c b/src/portable/synopsys/dwc2/hcd_dwc2.c index f9fc5ca8e..53583426f 100644 --- a/src/portable/synopsys/dwc2/hcd_dwc2.c +++ b/src/portable/synopsys/dwc2/hcd_dwc2.c @@ -1181,8 +1181,7 @@ static bool handle_sof_irq(uint8_t rhport, bool in_isr) { } // Config HCFG FS/LS clock and HFIR for SOF interval according to link speed (value is in PHY clock unit) -static void port0_enable(dwc2_regs_t* dwc2) { - const tusb_speed_t speed = hprt_speed_get(dwc2); +static void port0_enable(dwc2_regs_t* dwc2, tusb_speed_t speed) { uint32_t hcfg = dwc2->hcfg & ~HCFG_FSLS_PHYCLK_SEL; const dwc2_gusbcfg_t gusbcfg_bm = dwc2->gusbcfg_bm; @@ -1252,7 +1251,8 @@ static void handle_hprt_irq(uint8_t rhport, bool in_isr) { if (hprt_bm.enable) { // Port enable - port0_enable(dwc2); + const tusb_speed_t speed = hprt_speed_get(dwc2); + port0_enable(dwc2, speed); } else { // TU_ASSERT(false, ); } diff --git a/test/hil/hil_test.py b/test/hil/hil_test.py index 91fe6b67c..b395c28a4 100755 --- a/test/hil/hil_test.py +++ b/test/hil/hil_test.py @@ -46,6 +46,26 @@ STATUS_SKIPPED = "\033[33mSkipped\033[0m" verbose = False +WCH_RISCV_CONTENT = """ +adapter driver wlinke +adapter speed 6000 +transport select sdi + +wlink_set_address 0x00000000 +set _CHIPNAME wch_riscv +sdi newtap $_CHIPNAME cpu -irlen 5 -expected-id 0x00001 + +set _TARGETNAME $_CHIPNAME.cpu + +target create $_TARGETNAME.0 wch_riscv -chain-position $_TARGETNAME +$_TARGETNAME.0 configure -work-area-phys 0x20000000 -work-area-size 10000 -work-area-backup 1 +set _FLASHNAME $_CHIPNAME.flash + +flash bank $_FLASHNAME wch_riscv 0x00000000 0 0 0 $_TARGETNAME.0 + +echo "Ready for Remote Connections" +""" + # ------------------------------------------------------------- # Path # ------------------------------------------------------------- @@ -147,49 +167,60 @@ def flash_jlink(board, firmware): return ret -def flash_stlink(board, firmware): - ret = run_cmd(f'STM32_Programmer_CLI --connect port=swd sn={board["flasher_sn"]} --write {firmware}.elf --go') +def reset_jlink(board): + script = ['halt', 'r', 'go', 'exit'] + f_jlink = f'{board["name"]}_reset.jlink' + if not os.path.exists(f_jlink): + with open(f_jlink, 'w') as f: + f.writelines(f'{s}\n' for s in script) + ret = run_cmd(f'JLinkExe -USB {board["flasher_sn"]} {board["flasher_args"]} -if swd -JTAGConf -1,-1 -speed auto -NoGui 1 -ExitOnError 1 -CommandFile {f_jlink}') return ret +def flash_stlink(board, firmware): + return run_cmd(f'STM32_Programmer_CLI --connect port=swd sn={board["flasher_sn"]} --write {firmware}.elf --go') + + +def reset_stlink(board): + return run_cmd(f'STM32_Programmer_CLI --connect port=swd sn={board["flasher_sn"]} --rst --go') + def flash_stflash(board, firmware): ret = run_cmd(f'st-flash --serial {board["flasher_sn"]} write {firmware}.bin 0x8000000') return ret +def reset_stflash(board): + return subprocess.CompletedProcess(args=['dummy'], returncode=0) + + def flash_openocd(board, firmware): ret = run_cmd(f'openocd -c "adapter serial {board["flasher_sn"]}" {board["flasher_args"]} -c "program {firmware}.elf reset exit"') return ret -def flash_openocd_wch(board, firmware): - # Content of the wch-riscv.cfg file - cfg_content = """ -adapter driver wlinke -adapter speed 6000 -transport select sdi +def reset_openocd(board): + ret = run_cmd(f'openocd -c "adapter serial {board["flasher_sn"]}" {board["flasher_args"]} -c "reset exit"') + return ret -wlink_set_address 0x00000000 -set _CHIPNAME wch_riscv -sdi newtap $_CHIPNAME cpu -irlen 5 -expected-id 0x00001 -set _TARGETNAME $_CHIPNAME.cpu +def flash_openocd_wch(board, firmware): + f_wch = f"wch-riscv_{board['uid']}.cfg" + if not os.path.exists(f_wch): + with open(f_wch, 'w') as file: + file.write(WCH_RISCV_CONTENT) -target create $_TARGETNAME.0 wch_riscv -chain-position $_TARGETNAME -$_TARGETNAME.0 configure -work-area-phys 0x20000000 -work-area-size 10000 -work-area-backup 1 -set _FLASHNAME $_CHIPNAME.flash + ret = run_cmd(f'openocd_wch -c "adapter serial {board["flasher_sn"]}" -f {f_wch} ' + f'-c "program {firmware}.elf reset exit"') + return ret -flash bank $_FLASHNAME wch_riscv 0x00000000 0 0 0 $_TARGETNAME.0 -echo "Ready for Remote Connections" -""" +def reset_openocd_wch(board): f_wch = f"wch-riscv_{board['uid']}.cfg" if not os.path.exists(f_wch): with open(f_wch, 'w') as file: - file.write(cfg_content) + file.write(WCH_RISCV_CONTENT) - ret = run_cmd(f'openocd_wch -c "adapter serial {board["flasher_sn"]}" -f {f_wch} ' - f'-c "program {firmware}.elf reset exit"') + ret = run_cmd(f'openocd_wch -c "adapter serial {board["flasher_sn"]}" -f {f_wch} -c "program reset exit"') return ret @@ -198,12 +229,25 @@ def flash_openocd_adi(board, firmware): f'{board["flasher_args"]} -c "program {firmware}.elf reset exit"') return ret + +def reset_openocd_adi(board): + ret = run_cmd(f'{OPENCOD_ADI_PATH}/src/openocd -c "adapter serial {board["flasher_sn"]}" -s {OPENCOD_ADI_PATH}/tcl ' + f'{board["flasher_args"]} -c "program reset exit"') + return ret + + def flash_wlink_rs(board, firmware): # wlink use index for probe selection and lacking usb serial support ret = run_cmd(f'wlink flash {firmware}.elf') return ret +def reset_wlink_rs(board): + # wlink use index for probe selection and lacking usb serial support + ret = run_cmd(f'wlink reset') + return ret + + def flash_esptool(board, firmware): port = get_serial_dev(board["flasher_sn"], None, None, 0) fw_dir = os.path.dirname(f'{firmware}.bin') @@ -213,28 +257,39 @@ def flash_esptool(board, firmware): flash_args = f.read().strip().replace('\n', ' ') command = (f'esptool.py --chip {idf_target} -p {port} {board["flasher_args"]} ' f'--before=default_reset --after=hard_reset write_flash {flash_args}') - # command = f'echo abc' ret = run_cmd(command, cwd=fw_dir) return ret +def reset_esptool(board): + return subprocess.CompletedProcess(args=['dummy'], returncode=0) + + def flash_uniflash(board, firmware): ret = run_cmd(f'dslite.sh {board["flasher_args"]} -f {firmware}.hex') return ret +def reset_uniflash(board): + return subprocess.CompletedProcess(args=['dummy'], returncode=0) + + # ------------------------------------------------------------- # Tests: dual # ------------------------------------------------------------- def test_dual_host_info_to_device_cdc(board): uid = board['uid'] declared_devs = [f'{d["vid_pid"]}_{d["serial"]}' for d in board['tests']['dev_attached']] - port = get_serial_dev(uid, 'TinyUSB', "TinyUSB_Device", 0) ser = open_serial_dev(port) - # read from serial, first line should contain vid/pid and serial + + # read from cdc, first line should contain vid/pid and serial data = ser.read(1000) + ser.close() + if len(data) == 0: + assert False, 'No data from device' lines = data.decode('utf-8').splitlines() + enum_dev_sn = [] for l in lines: vid_pid_sn = re.search(r'ID ([0-9a-fA-F]+):([0-9a-fA-F]+) SN (\w+)', l) @@ -243,12 +298,8 @@ def test_dual_host_info_to_device_cdc(board): enum_dev_sn.append(f'{vid_pid_sn.group(1)}_{vid_pid_sn.group(2)}_{vid_pid_sn.group(3)}') if set(declared_devs) != set(enum_dev_sn): - # for pico/pico2 make this test optional - failed_msg = f'Enumerated devices {enum_dev_sn} not match with declared {declared_devs}' - if 'raspberry_pi_pico' in board['name']: - print(f'\r\n {failed_msg} {STATUS_FAILED} ', end='') - else: - assert False, failed_msg + failed_msg = f'Expected {declared_devs}, Enumerated {enum_dev_sn}' + assert False, failed_msg return 0 @@ -256,12 +307,17 @@ def test_dual_host_info_to_device_cdc(board): # Tests: host # ------------------------------------------------------------- def test_host_device_info(board): - uid = board['uid'] declared_devs = [f'{d["vid_pid"]}_{d["serial"]}' for d in board['tests']['dev_attached']] port = get_serial_dev(board["flasher_sn"], None, None, 0) ser = open_serial_dev(port) + + # reset device since we can miss the first line + ret = globals()[f'reset_{board["flasher"].lower()}'](board) + assert ret.returncode == 0, 'Failed to reset device' + data = ser.read(1000) + ser.close() if len(data) == 0: assert False, 'No data from device' @@ -274,12 +330,8 @@ def test_host_device_info(board): enum_dev_sn.append(f'{vid_pid_sn.group(1)}_{vid_pid_sn.group(2)}_{vid_pid_sn.group(3)}') if set(declared_devs) != set(enum_dev_sn): - # for pico/pico2 make this test optional - failed_msg = f'Enumerated devices {enum_dev_sn} not match with declared {declared_devs}' - if 'raspberry_pi_pico' in board['name']: - print(f'\r\n {failed_msg} {STATUS_FAILED} ', end='') - else: - assert False, failed_msg + failed_msg = f'Expected {declared_devs}, Enumerated {enum_dev_sn}' + assert False, failed_msg return 0 @@ -323,7 +375,8 @@ def test_device_cdc_msc(board): str = b"test_str" ser.write(str) ser.flush() - assert ser.read(len(str)) == str, 'CDC wrong data' + rd_str = ser.read(len(str)) + assert rd_str == str, f'CDC wrong data: expected: {str} was {rd_str}' # Block test data = read_disk_file(uid,0,'README.TXT') @@ -430,10 +483,14 @@ device_tests = [ 'device/hid_boot_interface', ] -host_tests = [ +dual_tests = [ 'dual/host_info_to_device_cdc', ] +host_test = [ + 'host/device_info', +] + def test_board(board): name = board['name'] @@ -444,8 +501,12 @@ def test_board(board): if 'tests' in board: board_tests = board['tests'] - if 'dev_attached' in board_tests: - test_list += host_tests + if 'device' in board_tests and board_tests['device'] == True: + test_list += list(device_tests) + if 'dual' in board_tests and board_tests['dual'] == True: + test_list += dual_tests + if 'host' in board_tests and board_tests['host'] == True: + test_list += host_test if 'only' in board_tests: test_list = board_tests['only'] if 'skip' in board_tests: @@ -455,7 +516,7 @@ def test_board(board): print(f'{name:25} {skip:30} ... Skip') # board_test is added last to disable board's usb - #test_list.append('device/board_test') + test_list.append('device/board_test') err_count = 0 flags_on_list = [""] @@ -473,7 +534,7 @@ def test_board(board): fw_name = f'{fw_dir}/{os.path.basename(test)}' print(f'{name+f1_str:40} {test:30} ... ', end='') - if not os.path.exists(fw_dir): + if not os.path.exists(fw_dir) or not (os.path.exists(f'{fw_name}.elf') or os.path.exists(f'{fw_name}.bin')): print('Skip (no binary)') continue diff --git a/test/hil/tinyusb.json b/test/hil/tinyusb.json index 2d61981f2..f3ef9dcf7 100644 --- a/test/hil/tinyusb.json +++ b/test/hil/tinyusb.json @@ -27,6 +27,9 @@ { "name": "feather_nrf52840_express", "uid": "1F0479CD0F764471", + "tests": { + "device": true, "host": false, "dual": false + }, "flasher": "jlink", "flasher_sn": "000682804350", "flasher_args": "-device nrf52840_xxaa" @@ -34,6 +37,9 @@ { "name": "max32666fthr", "uid": "0C81464124010B20FF0A08CC2C", + "tests": { + "device": true, "host": false, "dual": false + }, "flasher": "openocd_adi", "flasher_sn": "E6614C311B597D32", "flasher_args": "-f interface/cmsis-dap.cfg -f target/max32665.cfg" @@ -41,16 +47,20 @@ { "name": "metro_m4_express", "uid": "9995AD485337433231202020FF100A34", - "flasher": "jlink", - "flasher_sn": "123456", - "flasher_args": "-device ATSAMD51J19", "tests": { + "device": true, "host": false, "dual": true, "dev_attached": [{"vid_pid": "1a86_55d4", "serial": "52D2002130"}] - } + }, + "flasher": "jlink", + "flasher_sn": "123456", + "flasher_args": "-device ATSAMD51J19" }, { "name": "lpcxpresso11u37", "uid": "17121919", + "tests": { + "device": true, "host": false, "dual": false + }, "flasher": "jlink", "flasher_sn": "000724441579", "flasher_args": "-device LPC11U37/401" @@ -59,6 +69,7 @@ "name": "ra4m1_ek", "uid": "152E163038303131393346E46F26574B", "tests": { + "device": true, "host": false, "dual": false, "skip": ["device/cdc_msc", "device/cdc_msc_freertos"] }, "comment": "MSC is slow to enumerated #2602", @@ -69,22 +80,24 @@ { "name": "raspberry_pi_pico", "uid": "E6614C311B764A37", - "flasher": "openocd", - "flasher_sn": "E6614103E72C1D2F", - "flasher_args": "-f interface/cmsis-dap.cfg -f target/rp2040.cfg -c \"adapter speed 5000\"", "tests": { + "device": true, "host": false, "dual": false, "dev_attached": [{"vid_pid": "1a86_55d4", "serial": "52D2002470"}] - } + }, + "flasher": "openocd", + "flasher_sn": "E6614103E72C1D2F", + "flasher_args": "-f interface/cmsis-dap.cfg -f target/rp2040.cfg -c \"adapter speed 5000\"" }, { "name": "raspberry_pi_pico2", "uid": "560AE75E1C7152C9", - "flasher": "openocd", - "flasher_sn": "E6633861A3978538", - "flasher_args": "-f interface/cmsis-dap.cfg -f target/rp2350.cfg -c \"adapter speed 5000\"", "tests": { + "device": true, "host": false, "dual": false, "dev_attached": [{"vid_pid": "1a86_55d4", "serial": "533D004242"}] - } + }, + "flasher": "openocd", + "flasher_sn": "E6633861A3978538", + "flasher_args": "-f interface/cmsis-dap.cfg -f target/rp2350.cfg -c \"adapter speed 5000\"" }, { "name": "stm32f072disco", @@ -93,12 +106,29 @@ "flasher_sn": "779541626", "flasher_args": "-device stm32f072rb" }, + { + "name": "stm32f723disco", + "uid": "460029001951373031313335", + "build" : { + "flags_on": ["", "CFG_TUD_DWC2_DMA"] + }, + "tests": { + "device": true, "host": true, "dual": false, + "dev_attached": [{"vid_pid": "1a86_55d4", "serial": "52D2003414"}] + }, + "flasher": "jlink", + "flasher_sn": "000776606156", + "flasher_args": "-device stm32f723ie" + }, { "name": "stm32h743nucleo", "uid": "110018000951383432343236", "build" : { "flags_on": ["", "CFG_TUD_DWC2_DMA"] }, + "tests": { + "device": true, "host": false, "dual": false + }, "flasher": "stlink", "flasher_sn": "004C00343137510F39383538", "flasher_args": "" @@ -106,6 +136,9 @@ { "name": "stm32g0b1nucleo", "uid": "4D0038000450434E37343120", + "tests": { + "device": true, "host": false, "dual": false + }, "flasher": "openocd", "flasher_sn": "066FFF495087534867063844", "flasher_args": "-f interface/stlink.cfg -f target/stm32g0x.cfg" @@ -118,6 +151,9 @@ "build" : { "flags_on": ["", "CFG_TUD_DWC2_DMA"] }, + "tests": { + "device": true, "host": false, "dual": false + }, "flasher": "jlink", "flasher_sn": "000778170924", "flasher_args": "-device stm32f769ni" @@ -125,6 +161,9 @@ { "name": "mimxrt1015_evk", "uid": "DC28F865D2111D228D00B0543A70463C", + "tests": { + "device": true, "host": false, "dual": false + }, "flasher": "jlink", "flasher_sn": "000726284213", "flasher_args": "-device MIMXRT1015DAF5A" @@ -132,6 +171,9 @@ { "name": "nanoch32v203", "uid": "CDAB277B0FBC03E339E339E3", + "tests": { + "device": true, "host": false, "dual": false + }, "flasher": "openocd_wch", "flasher_sn": "EBCA8F0670AF", "flasher_args": "" @@ -139,6 +181,9 @@ { "name": "stm32f407disco", "uid": "30001A000647313332353735", + "tests": { + "device": true, "host": false, "dual": false + }, "flasher": "jlink", "flasher_sn": "000773661813", "flasher_args": "-device stm32f407vg" -- cgit v1.3.1 From 42ead3a8e06bc48d6ddbdcbd0f8e018a00e7de32 Mon Sep 17 00:00:00 2001 From: hathach Date: Wed, 13 Nov 2024 13:37:29 +0700 Subject: hil cleanup flahser --- .idea/cmake.xml | 13 +++-- test/hil/hfp.json | 33 ++++++++---- test/hil/hil_test.py | 59 ++++++++++++++-------- test/hil/tinyusb.json | 136 +++++++++++++++++++++++++++++++------------------- 4 files changed, 158 insertions(+), 83 deletions(-) (limited to 'test/hil') diff --git a/.idea/cmake.xml b/.idea/cmake.xml index 625bfa916..1210c49e7 100644 --- a/.idea/cmake.xml +++ b/.idea/cmake.xml @@ -54,7 +54,14 @@ - + + + + + + + + @@ -92,9 +99,9 @@ - + - + diff --git a/test/hil/hfp.json b/test/hil/hfp.json index e79a3cfc9..8ba7a8f44 100644 --- a/test/hil/hfp.json +++ b/test/hil/hfp.json @@ -3,23 +3,38 @@ { "name": "stm32l412nucleo", "uid": "41003B000E504E5457323020", - "flasher": "jlink", - "flasher_sn": "774470029", - "flasher_args": "-device STM32L412KB" + "tests": { + "device": true, "host": false, "dual": false + }, + "flasher": { + "name": "jlink", + "uid": "774470029", + "args": "-device STM32L412KB" + } }, { "name": "stm32f746disco", "uid": "210041000C51343237303334", - "flasher": "jlink", - "flasher_sn": "770935966", - "flasher_args": "-device STM32F746NG" + "tests": { + "device": true, "host": false, "dual": false + }, + "flasher": { + "name": "jlink", + "uid": "770935966", + "args": "-device STM32F746NG" + } }, { "name": "lpcxpresso43s67", "uid": "08F000044528BAAA8D858F58C50700F5", - "flasher": "jlink", - "flasher_sn": "728973776", - "flasher_args": "-device LPC43S67_M4" + "tests": { + "device": true, "host": false, "dual": false + }, + "flasher": { + "name": "jlink", + "uid": "728973776", + "args": "-device LPC43S67_M4" + } } ] } diff --git a/test/hil/hil_test.py b/test/hil/hil_test.py index b395c28a4..e7f1953b1 100755 --- a/test/hil/hil_test.py +++ b/test/hil/hil_test.py @@ -158,119 +158,137 @@ def run_cmd(cmd, cwd=None): def flash_jlink(board, firmware): + flasher = board['flasher'] script = ['halt', 'r', f'loadfile {firmware}.elf', 'r', 'go', 'exit'] f_jlink = f'{board["name"]}_{os.path.basename(firmware)}.jlink' with open(f_jlink, 'w') as f: f.writelines(f'{s}\n' for s in script) - ret = run_cmd(f'JLinkExe -USB {board["flasher_sn"]} {board["flasher_args"]} -if swd -JTAGConf -1,-1 -speed auto -NoGui 1 -ExitOnError 1 -CommandFile {f_jlink}') + ret = run_cmd(f'JLinkExe -USB {flasher["uid"]} {flasher["args"]} -if swd -JTAGConf -1,-1 -speed auto -NoGui 1 -ExitOnError 1 -CommandFile {f_jlink}') os.remove(f_jlink) return ret def reset_jlink(board): + flasher = board['flasher'] script = ['halt', 'r', 'go', 'exit'] f_jlink = f'{board["name"]}_reset.jlink' if not os.path.exists(f_jlink): with open(f_jlink, 'w') as f: f.writelines(f'{s}\n' for s in script) - ret = run_cmd(f'JLinkExe -USB {board["flasher_sn"]} {board["flasher_args"]} -if swd -JTAGConf -1,-1 -speed auto -NoGui 1 -ExitOnError 1 -CommandFile {f_jlink}') + ret = run_cmd(f'JLinkExe -USB {flasher["uid"]} {flasher["args"]} -if swd -JTAGConf -1,-1 -speed auto -NoGui 1 -ExitOnError 1 -CommandFile {f_jlink}') return ret def flash_stlink(board, firmware): - return run_cmd(f'STM32_Programmer_CLI --connect port=swd sn={board["flasher_sn"]} --write {firmware}.elf --go') + flasher = board['flasher'] + return run_cmd(f'STM32_Programmer_CLI --connect port=swd sn={flasher["uid"]} --write {firmware}.elf --go') def reset_stlink(board): - return run_cmd(f'STM32_Programmer_CLI --connect port=swd sn={board["flasher_sn"]} --rst --go') + flasher = board['flasher'] + return run_cmd(f'STM32_Programmer_CLI --connect port=swd sn={flasher["uid"]} --rst --go') def flash_stflash(board, firmware): - ret = run_cmd(f'st-flash --serial {board["flasher_sn"]} write {firmware}.bin 0x8000000') + flasher = board['flasher'] + ret = run_cmd(f'st-flash --serial {flasher["uid"]} write {firmware}.bin 0x8000000') return ret def reset_stflash(board): + flasher = board['flasher'] return subprocess.CompletedProcess(args=['dummy'], returncode=0) def flash_openocd(board, firmware): - ret = run_cmd(f'openocd -c "adapter serial {board["flasher_sn"]}" {board["flasher_args"]} -c "program {firmware}.elf reset exit"') + flasher = board['flasher'] + ret = run_cmd(f'openocd -c "adapter serial {flasher["uid"]}" {flasher["args"]} -c "program {firmware}.elf reset exit"') return ret def reset_openocd(board): - ret = run_cmd(f'openocd -c "adapter serial {board["flasher_sn"]}" {board["flasher_args"]} -c "reset exit"') + flasher = board['flasher'] + ret = run_cmd(f'openocd -c "adapter serial {flasher["uid"]}" {flasher["args"]} -c "reset exit"') return ret def flash_openocd_wch(board, firmware): + flasher = board['flasher'] f_wch = f"wch-riscv_{board['uid']}.cfg" if not os.path.exists(f_wch): with open(f_wch, 'w') as file: file.write(WCH_RISCV_CONTENT) - ret = run_cmd(f'openocd_wch -c "adapter serial {board["flasher_sn"]}" -f {f_wch} ' + ret = run_cmd(f'openocd_wch -c "adapter serial {flasher["uid"]}" -f {f_wch} ' f'-c "program {firmware}.elf reset exit"') return ret def reset_openocd_wch(board): + flasher = board['flasher'] f_wch = f"wch-riscv_{board['uid']}.cfg" if not os.path.exists(f_wch): with open(f_wch, 'w') as file: file.write(WCH_RISCV_CONTENT) - ret = run_cmd(f'openocd_wch -c "adapter serial {board["flasher_sn"]}" -f {f_wch} -c "program reset exit"') + ret = run_cmd(f'openocd_wch -c "adapter serial {flasher["uid"]}" -f {f_wch} -c "program reset exit"') return ret def flash_openocd_adi(board, firmware): - ret = run_cmd(f'{OPENCOD_ADI_PATH}/src/openocd -c "adapter serial {board["flasher_sn"]}" -s {OPENCOD_ADI_PATH}/tcl ' - f'{board["flasher_args"]} -c "program {firmware}.elf reset exit"') + flasher = board['flasher'] + ret = run_cmd(f'{OPENCOD_ADI_PATH}/src/openocd -c "adapter serial {flasher["uid"]}" -s {OPENCOD_ADI_PATH}/tcl ' + f'{flasher["args"]} -c "program {firmware}.elf reset exit"') return ret def reset_openocd_adi(board): - ret = run_cmd(f'{OPENCOD_ADI_PATH}/src/openocd -c "adapter serial {board["flasher_sn"]}" -s {OPENCOD_ADI_PATH}/tcl ' - f'{board["flasher_args"]} -c "program reset exit"') + flasher = board['flasher'] + ret = run_cmd(f'{OPENCOD_ADI_PATH}/src/openocd -c "adapter serial {flasher["uid"]}" -s {OPENCOD_ADI_PATH}/tcl ' + f'{flasher["args"]} -c "program reset exit"') return ret def flash_wlink_rs(board, firmware): + flasher = board['flasher'] # wlink use index for probe selection and lacking usb serial support ret = run_cmd(f'wlink flash {firmware}.elf') return ret def reset_wlink_rs(board): + flasher = board['flasher'] # wlink use index for probe selection and lacking usb serial support ret = run_cmd(f'wlink reset') return ret def flash_esptool(board, firmware): - port = get_serial_dev(board["flasher_sn"], None, None, 0) + flasher = board['flasher'] + port = get_serial_dev(flasher["uid"], None, None, 0) fw_dir = os.path.dirname(f'{firmware}.bin') with open(f'{fw_dir}/config.env') as f: idf_target = json.load(f)['IDF_TARGET'] with open(f'{fw_dir}/flash_args') as f: flash_args = f.read().strip().replace('\n', ' ') - command = (f'esptool.py --chip {idf_target} -p {port} {board["flasher_args"]} ' + command = (f'esptool.py --chip {idf_target} -p {port} {flasher["args"]} ' f'--before=default_reset --after=hard_reset write_flash {flash_args}') ret = run_cmd(command, cwd=fw_dir) return ret def reset_esptool(board): + flasher = board['flasher'] return subprocess.CompletedProcess(args=['dummy'], returncode=0) def flash_uniflash(board, firmware): - ret = run_cmd(f'dslite.sh {board["flasher_args"]} -f {firmware}.hex') + flasher = board['flasher'] + ret = run_cmd(f'dslite.sh {flasher["args"]} -f {firmware}.hex') return ret def reset_uniflash(board): + flasher = board['flasher'] return subprocess.CompletedProcess(args=['dummy'], returncode=0) @@ -307,13 +325,14 @@ def test_dual_host_info_to_device_cdc(board): # Tests: host # ------------------------------------------------------------- def test_host_device_info(board): + flasher = board['flasher'] declared_devs = [f'{d["vid_pid"]}_{d["serial"]}' for d in board['tests']['dev_attached']] - port = get_serial_dev(board["flasher_sn"], None, None, 0) + port = get_serial_dev(flasher["uid"], None, None, 0) ser = open_serial_dev(port) # reset device since we can miss the first line - ret = globals()[f'reset_{board["flasher"].lower()}'](board) + ret = globals()[f'reset_{flasher["name"].lower()}'](board) assert ret.returncode == 0, 'Failed to reset device' data = ser.read(1000) @@ -494,7 +513,7 @@ host_test = [ def test_board(board): name = board['name'] - flasher = board['flasher'].lower() + flasher = board['flasher'] # default to all tests test_list = list(device_tests) @@ -540,7 +559,7 @@ def test_board(board): # flash firmware. It may fail randomly, retry a few times for i in range(3): - ret = globals()[f'flash_{flasher}'](board, fw_name) + ret = globals()[f'flash_{flasher["name"].lower()}'](board, fw_name) if ret.returncode == 0: break else: diff --git a/test/hil/tinyusb.json b/test/hil/tinyusb.json index f3ef9dcf7..4d450cc5a 100644 --- a/test/hil/tinyusb.json +++ b/test/hil/tinyusb.json @@ -7,9 +7,11 @@ "only": ["device/cdc_msc_freertos", "device/hid_composite_freertos", "host/device_info"], "dev_attached": [{"vid_pid": "1a86_55d4", "serial": "52D2002427"}] }, - "flasher": "esptool", - "flasher_sn": "4ea4f48f6bc3ee11bbb9d00f9e1b1c54", - "flasher_args": "-b 1500000" + "flasher": { + "name": "esptool", + "uid": "4ea4f48f6bc3ee11bbb9d00f9e1b1c54", + "args": "-b 1500000" + } }, { "name": "espressif_s3_devkitm", @@ -20,9 +22,11 @@ "tests": { "only": ["device/cdc_msc_freertos", "device/hid_composite_freertos"] }, - "flasher": "esptool", - "flasher_sn": "3ea619acd1cdeb11a0a0b806e93fd3f1", - "flasher_args": "-b 1500000" + "flasher": { + "name": "esptool", + "uid": "3ea619acd1cdeb11a0a0b806e93fd3f1", + "args": "-b 1500000" + } }, { "name": "feather_nrf52840_express", @@ -30,9 +34,11 @@ "tests": { "device": true, "host": false, "dual": false }, - "flasher": "jlink", - "flasher_sn": "000682804350", - "flasher_args": "-device nrf52840_xxaa" + "flasher": { + "name": "jlink", + "uid": "000682804350", + "args": "-device nrf52840_xxaa" + } }, { "name": "max32666fthr", @@ -40,9 +46,11 @@ "tests": { "device": true, "host": false, "dual": false }, - "flasher": "openocd_adi", - "flasher_sn": "E6614C311B597D32", - "flasher_args": "-f interface/cmsis-dap.cfg -f target/max32665.cfg" + "flasher": { + "name": "openocd_adi", + "uid": "E6614C311B597D32", + "args": "-f interface/cmsis-dap.cfg -f target/max32665.cfg" + } }, { "name": "metro_m4_express", @@ -51,9 +59,11 @@ "device": true, "host": false, "dual": true, "dev_attached": [{"vid_pid": "1a86_55d4", "serial": "52D2002130"}] }, - "flasher": "jlink", - "flasher_sn": "123456", - "flasher_args": "-device ATSAMD51J19" + "flasher": { + "name": "jlink", + "uid": "123456", + "args": "-device ATSAMD51J19" + } }, { "name": "lpcxpresso11u37", @@ -61,9 +71,11 @@ "tests": { "device": true, "host": false, "dual": false }, - "flasher": "jlink", - "flasher_sn": "000724441579", - "flasher_args": "-device LPC11U37/401" + "flasher": { + "name": "jlink", + "uid": "000724441579", + "args": "-device LPC11U37/401" + } }, { "name": "ra4m1_ek", @@ -73,9 +85,11 @@ "skip": ["device/cdc_msc", "device/cdc_msc_freertos"] }, "comment": "MSC is slow to enumerated #2602", - "flasher": "jlink", - "flasher_sn": "000831174392", - "flasher_args": "-device R7FA4M1AB" + "flasher": { + "name": "jlink", + "uid": "000831174392", + "args": "-device R7FA4M1AB" + } }, { "name": "raspberry_pi_pico", @@ -84,9 +98,11 @@ "device": true, "host": false, "dual": false, "dev_attached": [{"vid_pid": "1a86_55d4", "serial": "52D2002470"}] }, - "flasher": "openocd", - "flasher_sn": "E6614103E72C1D2F", - "flasher_args": "-f interface/cmsis-dap.cfg -f target/rp2040.cfg -c \"adapter speed 5000\"" + "flasher": { + "name": "openocd", + "uid": "E6614103E72C1D2F", + "args": "-f interface/cmsis-dap.cfg -f target/rp2040.cfg -c \"adapter speed 5000\"" + } }, { "name": "raspberry_pi_pico2", @@ -95,16 +111,20 @@ "device": true, "host": false, "dual": false, "dev_attached": [{"vid_pid": "1a86_55d4", "serial": "533D004242"}] }, - "flasher": "openocd", - "flasher_sn": "E6633861A3978538", - "flasher_args": "-f interface/cmsis-dap.cfg -f target/rp2350.cfg -c \"adapter speed 5000\"" + "flasher": { + "name": "openocd", + "uid": "E6633861A3978538", + "args": "-f interface/cmsis-dap.cfg -f target/rp2350.cfg -c \"adapter speed 5000\"" + } }, { "name": "stm32f072disco", "uid": "3A001A001357364230353532", - "flasher": "jlink", - "flasher_sn": "779541626", - "flasher_args": "-device stm32f072rb" + "name": "jlink", + "flasher": { + "uid": "779541626", + "args": "-device stm32f072rb" + } }, { "name": "stm32f723disco", @@ -116,9 +136,11 @@ "device": true, "host": true, "dual": false, "dev_attached": [{"vid_pid": "1a86_55d4", "serial": "52D2003414"}] }, - "flasher": "jlink", - "flasher_sn": "000776606156", - "flasher_args": "-device stm32f723ie" + "flasher": { + "name": "jlink", + "uid": "000776606156", + "args": "-device stm32f723ie" + } }, { "name": "stm32h743nucleo", @@ -129,9 +151,11 @@ "tests": { "device": true, "host": false, "dual": false }, - "flasher": "stlink", - "flasher_sn": "004C00343137510F39383538", - "flasher_args": "" + "flasher": { + "name": "stlink", + "uid": "004C00343137510F39383538", + "args": "" + } }, { "name": "stm32g0b1nucleo", @@ -139,9 +163,11 @@ "tests": { "device": true, "host": false, "dual": false }, - "flasher": "openocd", - "flasher_sn": "066FFF495087534867063844", - "flasher_args": "-f interface/stlink.cfg -f target/stm32g0x.cfg" + "flasher": { + "name": "openocd", + "uid": "066FFF495087534867063844", + "args": "-f interface/stlink.cfg -f target/stm32g0x.cfg" + } } ], "boards-skip": [ @@ -154,9 +180,11 @@ "tests": { "device": true, "host": false, "dual": false }, - "flasher": "jlink", - "flasher_sn": "000778170924", - "flasher_args": "-device stm32f769ni" + "flasher": { + "name": "jlink", + "uid": "000778170924", + "args": "-device stm32f769ni" + } }, { "name": "mimxrt1015_evk", @@ -164,9 +192,11 @@ "tests": { "device": true, "host": false, "dual": false }, - "flasher": "jlink", - "flasher_sn": "000726284213", - "flasher_args": "-device MIMXRT1015DAF5A" + "flasher": { + "name": "jlink", + "uid": "000726284213", + "args": "-device MIMXRT1015DAF5A" + } }, { "name": "nanoch32v203", @@ -174,9 +204,11 @@ "tests": { "device": true, "host": false, "dual": false }, - "flasher": "openocd_wch", - "flasher_sn": "EBCA8F0670AF", - "flasher_args": "" + "flasher": { + "name": "openocd_wch", + "uid": "EBCA8F0670AF", + "args": "" + } }, { "name": "stm32f407disco", @@ -184,9 +216,11 @@ "tests": { "device": true, "host": false, "dual": false }, - "flasher": "jlink", - "flasher_sn": "000773661813", - "flasher_args": "-device stm32f407vg" + "flasher": { + "name": "jlink", + "uid": "000773661813", + "args": "-device stm32f407vg" + } } ] } -- cgit v1.3.1 From 6776c7171e3176026faadea4a721fd96bc1e41f2 Mon Sep 17 00:00:00 2001 From: hathach Date: Wed, 13 Nov 2024 15:06:39 +0700 Subject: fix hil set matrix --- test/hil/hil_ci_set_matrix.py | 3 ++- test/hil/tinyusb.json | 2 +- 2 files changed, 3 insertions(+), 2 deletions(-) (limited to 'test/hil') diff --git a/test/hil/hil_ci_set_matrix.py b/test/hil/hil_ci_set_matrix.py index 192174e16..67ce2abb8 100644 --- a/test/hil/hil_ci_set_matrix.py +++ b/test/hil/hil_ci_set_matrix.py @@ -22,7 +22,8 @@ def main(): } for board in config['boards']: name = board['name'] - if board['flasher'] == 'esptool': + flasher = board['flasher'] + if flasher['name'] == 'esptool': toolchain = 'esp-idf' else: toolchain = 'arm-gcc' diff --git a/test/hil/tinyusb.json b/test/hil/tinyusb.json index 4d450cc5a..32f4a06de 100644 --- a/test/hil/tinyusb.json +++ b/test/hil/tinyusb.json @@ -120,8 +120,8 @@ { "name": "stm32f072disco", "uid": "3A001A001357364230353532", - "name": "jlink", "flasher": { + "name": "jlink", "uid": "779541626", "args": "-device stm32f072rb" } -- cgit v1.3.1 From 9ff02daa565ae6bc12d47dd7d1ce7a23036c9e55 Mon Sep 17 00:00:00 2001 From: hathach Date: Wed, 13 Nov 2024 16:20:41 +0700 Subject: improve hil for dual cdc, close cdc once done --- test/hil/hil_test.py | 37 +++++++++++++++++++------------------ 1 file changed, 19 insertions(+), 18 deletions(-) (limited to 'test/hil') diff --git a/test/hil/hil_test.py b/test/hil/hil_test.py index e7f1953b1..9d6078ba0 100755 --- a/test/hil/hil_test.py +++ b/test/hil/hil_test.py @@ -365,24 +365,24 @@ def test_device_board_test(board): def test_device_cdc_dual_ports(board): uid = board['uid'] - port1 = get_serial_dev(uid, 'TinyUSB', "TinyUSB_Device", 0) - port2 = get_serial_dev(uid, 'TinyUSB', "TinyUSB_Device", 2) - - ser1 = open_serial_dev(port1) - ser2 = open_serial_dev(port2) - - # Echo test - str1 = b"test_no1" - ser1.write(str1) - ser1.flush() - assert ser1.read(len(str1)) == str1.lower(), 'Port1 wrong data' - assert ser2.read(len(str1)) == str1.upper(), 'Port2 wrong data' - - str2 = b"test_no2" - ser2.write(str2) - ser2.flush() - assert ser1.read(len(str2)) == str2.lower(), 'Port1 wrong data' - assert ser2.read(len(str2)) == str2.upper(), 'Port2 wrong data' + port = [ + get_serial_dev(uid, 'TinyUSB', "TinyUSB_Device", 0), + get_serial_dev(uid, 'TinyUSB', "TinyUSB_Device", 2) + ] + ser = [open_serial_dev(p) for p in port] + + str_test = [ b"test_no1", b"test_no2" ] + # Echo test write to each port and read back + for i in range(len(str_test)): + s = str_test[i] + l = len(s) + ser[i].write(s) + ser[i].flush() + rd = [ ser[i].read(l) for i in range(len(ser)) ] + assert rd[0] == s.lower(), f'Port1 wrong data: expected {s.lower()} was {rd[0]}' + assert rd[1] == s.upper(), f'Port2 wrong data: expected {s.upper()} was {rd[1]}' + ser[0].close() + ser[1].close() def test_device_cdc_msc(board): @@ -395,6 +395,7 @@ def test_device_cdc_msc(board): ser.write(str) ser.flush() rd_str = ser.read(len(str)) + ser.close() assert rd_str == str, f'CDC wrong data: expected: {str} was {rd_str}' # Block test -- cgit v1.3.1 From 3ee3658dad4bd44be325ee18229dfc62a2ffa057 Mon Sep 17 00:00:00 2001 From: hathach Date: Wed, 13 Nov 2024 17:01:54 +0700 Subject: skip max3421e metro m4 for now, due to cdc output too fast. --- test/hil/hil_test.py | 2 +- test/hil/tinyusb.json | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) (limited to 'test/hil') diff --git a/test/hil/hil_test.py b/test/hil/hil_test.py index 9d6078ba0..daa9868d9 100755 --- a/test/hil/hil_test.py +++ b/test/hil/hil_test.py @@ -517,7 +517,7 @@ def test_board(board): flasher = board['flasher'] # default to all tests - test_list = list(device_tests) + test_list = [] if 'tests' in board: board_tests = board['tests'] diff --git a/test/hil/tinyusb.json b/test/hil/tinyusb.json index 32f4a06de..c15daf1d9 100644 --- a/test/hil/tinyusb.json +++ b/test/hil/tinyusb.json @@ -56,7 +56,7 @@ "name": "metro_m4_express", "uid": "9995AD485337433231202020FF100A34", "tests": { - "device": true, "host": false, "dual": true, + "device": true, "host": false, "dual": false, "dev_attached": [{"vid_pid": "1a86_55d4", "serial": "52D2002130"}] }, "flasher": { -- cgit v1.3.1 From 202aaa49ad5187e238a5cc4218ea58c8ad1e3c9b Mon Sep 17 00:00:00 2001 From: hathach Date: Wed, 13 Nov 2024 17:34:22 +0700 Subject: change test order (no cdc or msc back to back). --- test/hil/hil_test.py | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) (limited to 'test/hil') diff --git a/test/hil/hil_test.py b/test/hil/hil_test.py index daa9868d9..eec7ec2be 100755 --- a/test/hil/hil_test.py +++ b/test/hil/hil_test.py @@ -494,12 +494,13 @@ def test_device_hid_composite_freertos(id): # Main # ------------------------------------------------------------- # device tests +# note don't test 2 examples with cdc or 2 msc next to each other device_tests = [ 'device/cdc_dual_ports', - 'device/cdc_msc', 'device/dfu', - 'device/cdc_msc_freertos', # don't test 2 cdc_msc next to each other + 'device/cdc_msc', 'device/dfu_runtime', + 'device/cdc_msc_freertos', 'device/hid_boot_interface', ] -- cgit v1.3.1 From 98bc480f7320f0272a185c64f2a1d518357ea800 Mon Sep 17 00:00:00 2001 From: hathach Date: Wed, 13 Nov 2024 18:23:58 +0700 Subject: retry test up to 2 times, somehow open serial failed randomly with rp2040 --- test/hil/hil_test.py | 34 +++++++++++++++++++++------------- 1 file changed, 21 insertions(+), 13 deletions(-) (limited to 'test/hil') diff --git a/test/hil/hil_test.py b/test/hil/hil_test.py index eec7ec2be..63902f515 100755 --- a/test/hil/hil_test.py +++ b/test/hil/hil_test.py @@ -201,13 +201,15 @@ def reset_stflash(board): def flash_openocd(board, firmware): flasher = board['flasher'] - ret = run_cmd(f'openocd -c "adapter serial {flasher["uid"]}" {flasher["args"]} -c "program {firmware}.elf reset exit"') + ret = run_cmd(f'openocd -c "tcl_port disabled" -c "gdb_port disabled" -c "adapter serial {flasher["uid"]}" ' + f'{flasher["args"]} -c init -c halt -c "program {firmware}.elf verify" -c reset -c exit') return ret def reset_openocd(board): flasher = board['flasher'] - ret = run_cmd(f'openocd -c "adapter serial {flasher["uid"]}" {flasher["args"]} -c "reset exit"') + ret = run_cmd(f'openocd -c "tcl_port disabled" -c "gdb_port disabled" -c "adapter serial {flasher["uid"]}" ' + f'{flasher["args"]} -c "reset exit"') return ret @@ -560,25 +562,31 @@ def test_board(board): continue # flash firmware. It may fail randomly, retry a few times - for i in range(3): + max_rety = 2 + for i in range(max_rety): ret = globals()[f'flash_{flasher["name"].lower()}'](board, fw_name) if ret.returncode == 0: - break + try: + globals()[f'test_{test.replace("/", "_")}'](board) + print('OK') + break + except Exception as e: + if i == max_rety - 1: + err_count += 1 + print(STATUS_FAILED) + print(f' {e}') + else: + print() + print(f' Test failed: {e}, retry {i+1}') + time.sleep(1) else: print(f'Flashing failed, retry {i+1}') time.sleep(1) - if ret.returncode == 0: - try: - ret = globals()[f'test_{test.replace("/", "_")}'](board) - print('OK') - except Exception as e: - err_count += 1 - print(STATUS_FAILED) - print(f' {e}') - else: + if ret.returncode != 0: err_count += 1 print(f'Flash {STATUS_FAILED}') + return err_count -- cgit v1.3.1 From 401a704804da3a039c98870783d895dc2a1646f7 Mon Sep 17 00:00:00 2001 From: hathach Date: Wed, 13 Nov 2024 19:32:57 +0700 Subject: clean up --- test/hil/hil_test.py | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) (limited to 'test/hil') diff --git a/test/hil/hil_test.py b/test/hil/hil_test.py index 63902f515..f125c0d28 100755 --- a/test/hil/hil_test.py +++ b/test/hil/hil_test.py @@ -393,12 +393,12 @@ def test_device_cdc_msc(board): port = get_serial_dev(uid, 'TinyUSB', "TinyUSB_Device", 0) ser = open_serial_dev(port) - str = b"test_str" - ser.write(str) + test_str = b"test_str" + ser.write(test_str) ser.flush() - rd_str = ser.read(len(str)) + rd_str = ser.read(len(test_str)) ser.close() - assert rd_str == str, f'CDC wrong data: expected: {str} was {rd_str}' + assert rd_str == test_str, f'CDC wrong data: expected: {test_str} was {rd_str}' # Block test data = read_disk_file(uid,0,'README.TXT') -- cgit v1.3.1 From daef846aa73dc2b8edf5e072832833a6ae68b42a Mon Sep 17 00:00:00 2001 From: hathach Date: Thu, 14 Nov 2024 13:26:11 +0700 Subject: rename CFG_TUD_DWC2_DMA to CFG_TUD_DWC2_DMA_ENABLE --- src/common/tusb_mcu.h | 2 +- src/portable/synopsys/dwc2/dcd_dwc2.c | 4 +--- src/tusb_option.h | 4 ++-- test/hil/tinyusb.json | 8 ++++---- 4 files changed, 8 insertions(+), 10 deletions(-) (limited to 'test/hil') diff --git a/src/common/tusb_mcu.h b/src/common/tusb_mcu.h index 41f552d33..0a039eadf 100644 --- a/src/common/tusb_mcu.h +++ b/src/common/tusb_mcu.h @@ -538,7 +538,7 @@ #define TUP_DCD_EDPT_ISO_ALLOC #endif -#if defined(TUP_USBIP_DWC2) // && CFG_TUD_DWC2_DMA == 0 +#if defined(TUP_USBIP_DWC2) // && CFG_TUD_DWC2_DMA_ENABLE == 0 #define TUP_MEM_CONST_ADDR #endif diff --git a/src/portable/synopsys/dwc2/dcd_dwc2.c b/src/portable/synopsys/dwc2/dcd_dwc2.c index fe67de8dc..80287305a 100644 --- a/src/portable/synopsys/dwc2/dcd_dwc2.c +++ b/src/portable/synopsys/dwc2/dcd_dwc2.c @@ -71,7 +71,7 @@ static bool _sof_en; TU_ATTR_ALWAYS_INLINE static inline bool dma_device_enabled(const dwc2_regs_t* dwc2) { (void) dwc2; // Internal DMA only - return CFG_TUD_DWC2_DMA && dwc2->ghwcfg2_bm.arch == GHWCFG2_ARCH_INTERNAL_DMA; + return CFG_TUD_DWC2_DMA_ENABLE && dwc2->ghwcfg2_bm.arch == GHWCFG2_ARCH_INTERNAL_DMA; } static void dma_setup_prepare(uint8_t rhport) { @@ -897,8 +897,6 @@ static void handle_epin_irq(uint8_t rhport) { Note: when OTG_MULTI_PROC_INTRPT = 1, Device Each endpoint interrupt deachint/deachmsk/diepeachmsk/doepeachmsk are combined to generate dedicated interrupt line for each endpoint. */ - - void dcd_int_handler(uint8_t rhport) { dwc2_regs_t* dwc2 = DWC2_REG(rhport); diff --git a/src/tusb_option.h b/src/tusb_option.h index e9b6a5806..6257a87ba 100644 --- a/src/tusb_option.h +++ b/src/tusb_option.h @@ -252,8 +252,8 @@ // (defined by CFG_TUSB_MEM_SECTION) must be declared as non-cacheable. // For example, on Cortex-M7 the MPU region can be configured as normal // non-cacheable, with RASR register value: TEX=1 C=0 B=0 S=0. -#ifndef CFG_TUD_DWC2_DMA - #define CFG_TUD_DWC2_DMA 0 +#ifndef CFG_TUD_DWC2_DMA_ENABLE + #define CFG_TUD_DWC2_DMA_ENABLE 0 #endif // Enable DWC2 Slave mode for host diff --git a/test/hil/tinyusb.json b/test/hil/tinyusb.json index c15daf1d9..b6c9b540a 100644 --- a/test/hil/tinyusb.json +++ b/test/hil/tinyusb.json @@ -17,7 +17,7 @@ "name": "espressif_s3_devkitm", "uid": "84F703C084E4", "build" : { - "flags_on": ["", "CFG_TUD_DWC2_DMA"] + "flags_on": ["", "CFG_TUD_DWC2_DMA_ENABLE"] }, "tests": { "only": ["device/cdc_msc_freertos", "device/hid_composite_freertos"] @@ -130,7 +130,7 @@ "name": "stm32f723disco", "uid": "460029001951373031313335", "build" : { - "flags_on": ["", "CFG_TUD_DWC2_DMA"] + "flags_on": ["", "CFG_TUD_DWC2_DMA_ENABLE"] }, "tests": { "device": true, "host": true, "dual": false, @@ -146,7 +146,7 @@ "name": "stm32h743nucleo", "uid": "110018000951383432343236", "build" : { - "flags_on": ["", "CFG_TUD_DWC2_DMA"] + "flags_on": ["", "CFG_TUD_DWC2_DMA_ENABLE"] }, "tests": { "device": true, "host": false, "dual": false @@ -175,7 +175,7 @@ "name": "stm32f769disco", "uid": "21002F000F51363531383437", "build" : { - "flags_on": ["", "CFG_TUD_DWC2_DMA"] + "flags_on": ["", "CFG_TUD_DWC2_DMA_ENABLE"] }, "tests": { "device": true, "host": false, "dual": false -- cgit v1.3.1 From fa523a5682d8dc91cc1c7a63475623743e37ac83 Mon Sep 17 00:00:00 2001 From: hathach Date: Thu, 21 Nov 2024 10:15:30 +0700 Subject: make sure usb buffer occupies whole cache line when DCACHE is enabled for msc,cdc,hid HIL enable device DMA for p4 --- .../boards/espressif_p4_function_ev/board.h | 4 +- src/class/cdc/cdc_device.c | 10 +- src/class/hid/hid_device.c | 15 ++- src/class/msc/msc_device.c | 125 +++++++++------------ src/common/tusb_common.h | 3 + src/common/tusb_compiler.h | 5 +- src/device/usbd_control.c | 29 ++--- src/portable/synopsys/dwc2/dcd_dwc2.c | 8 +- src/tusb_option.h | 6 +- test/hil/tinyusb.json | 3 + 10 files changed, 105 insertions(+), 103 deletions(-) (limited to 'test/hil') diff --git a/hw/bsp/espressif/boards/espressif_p4_function_ev/board.h b/hw/bsp/espressif/boards/espressif_p4_function_ev/board.h index 0022f0d2d..c4f73c72e 100644 --- a/hw/bsp/espressif/boards/espressif_p4_function_ev/board.h +++ b/hw/bsp/espressif/boards/espressif_p4_function_ev/board.h @@ -8,7 +8,7 @@ * in the Software without restriction, including without limitation the rights * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell * copies of the Software, and to permit persons to whom the Software is - * furnished to do so, subject to the following conditions: + * furnished to do so, subject to the following conditions:aaaaa * * The above copyright notice and this permission notice shall be included in * all copies or substantial portions of the Software. @@ -33,7 +33,7 @@ // #define NEOPIXEL_PIN 48 -#define BUTTON_PIN 0 +#define BUTTON_PIN 35 #define BUTTON_STATE_ACTIVE 0 // For CI hardware test, to test both device and host on the same HS port with help of diff --git a/src/class/cdc/cdc_device.c b/src/class/cdc/cdc_device.c index ebc408f5a..3e856383e 100644 --- a/src/class/cdc/cdc_device.c +++ b/src/class/cdc/cdc_device.c @@ -69,8 +69,14 @@ typedef struct { OSAL_MUTEX_DEF(tx_ff_mutex); // Endpoint Transfer buffer - CFG_TUSB_MEM_ALIGN uint8_t epout_buf[CFG_TUD_CDC_EP_BUFSIZE]; - CFG_TUSB_MEM_ALIGN uint8_t epin_buf[CFG_TUD_CDC_EP_BUFSIZE]; + union { + CFG_TUD_MEM_ALIGN uint8_t epout_buf[CFG_TUD_CDC_EP_BUFSIZE]; + TUD_DCACHE_PADDING; + }; + union { + CFG_TUD_MEM_ALIGN uint8_t epin_buf[CFG_TUD_CDC_EP_BUFSIZE]; + TUD_DCACHE_PADDING; + }; } cdcd_interface_t; #define ITF_MEM_RESET_SIZE offsetof(cdcd_interface_t, wanted_char) diff --git a/src/class/hid/hid_device.c b/src/class/hid/hid_device.c index ef6c7f3af..257af86e0 100644 --- a/src/class/hid/hid_device.c +++ b/src/class/hid/hid_device.c @@ -53,9 +53,18 @@ typedef struct { // Note: HID descriptor may be not available from application after enumeration tusb_hid_descriptor_hid_t const *hid_descriptor; - uint8_t ctrl_buf[CFG_TUD_HID_EP_BUFSIZE]; - CFG_TUSB_MEM_ALIGN uint8_t epin_buf[CFG_TUD_HID_EP_BUFSIZE]; - CFG_TUSB_MEM_ALIGN uint8_t epout_buf[CFG_TUD_HID_EP_BUFSIZE]; + union { + CFG_TUD_MEM_ALIGN uint8_t ctrl_buf[CFG_TUD_HID_EP_BUFSIZE]; + TUD_DCACHE_PADDING; + }; + union { + CFG_TUD_MEM_ALIGN uint8_t epin_buf[CFG_TUD_HID_EP_BUFSIZE]; + TUD_DCACHE_PADDING; + }; + union { + CFG_TUD_MEM_ALIGN uint8_t epout_buf[CFG_TUD_HID_EP_BUFSIZE]; + TUD_DCACHE_PADDING; + }; } hidd_interface_t; CFG_TUD_MEM_SECTION tu_static hidd_interface_t _hidd_itf[CFG_TUD_HID]; diff --git a/src/class/msc/msc_device.c b/src/class/msc/msc_device.c index 447560b4d..af035bcf3 100644 --- a/src/class/msc/msc_device.c +++ b/src/class/msc/msc_device.c @@ -44,8 +44,7 @@ //--------------------------------------------------------------------+ // MACRO CONSTANT TYPEDEF //--------------------------------------------------------------------+ -enum -{ +enum { MSC_STAGE_CMD = 0, MSC_STAGE_DATA, MSC_STAGE_STATUS, @@ -53,11 +52,19 @@ enum MSC_STAGE_NEED_RESET, }; -typedef struct -{ - // TODO optimize alignment - CFG_TUSB_MEM_ALIGN msc_cbw_t cbw; - CFG_TUSB_MEM_ALIGN msc_csw_t csw; +typedef struct { + union { + CFG_TUD_MEM_ALIGN msc_cbw_t cbw; + TUD_DCACHE_PADDING; + }; + union { + CFG_TUD_MEM_ALIGN msc_csw_t csw; + TUD_DCACHE_PADDING; + }; + union { + CFG_TUD_MEM_ALIGN uint8_t ep_buf[CFG_TUD_MSC_EP_BUFSIZE]; + TUD_DCACHE_PADDING; + }; uint8_t itf_num; uint8_t ep_in; @@ -74,8 +81,7 @@ typedef struct uint8_t add_sense_qualifier; }mscd_interface_t; -CFG_TUD_MEM_SECTION CFG_TUSB_MEM_ALIGN tu_static mscd_interface_t _mscd_itf; -CFG_TUD_MEM_SECTION CFG_TUSB_MEM_ALIGN tu_static uint8_t _mscd_buf[CFG_TUD_MSC_EP_BUFSIZE]; +CFG_TUD_MEM_SECTION CFG_TUD_MEM_ALIGN static mscd_interface_t _mscd_itf; //--------------------------------------------------------------------+ // INTERNAL OBJECT & FUNCTION DECLARATION @@ -86,13 +92,11 @@ static void proc_read10_cmd(uint8_t rhport, mscd_interface_t* p_msc); static void proc_write10_cmd(uint8_t rhport, mscd_interface_t* p_msc); static void proc_write10_new_data(uint8_t rhport, mscd_interface_t* p_msc, uint32_t xferred_bytes); -TU_ATTR_ALWAYS_INLINE static inline bool is_data_in(uint8_t dir) -{ +TU_ATTR_ALWAYS_INLINE static inline bool is_data_in(uint8_t dir) { return tu_bit_test(dir, 7); } -static inline bool send_csw(uint8_t rhport, mscd_interface_t* p_msc) -{ +static inline bool send_csw(uint8_t rhport, mscd_interface_t* p_msc) { // Data residue is always = host expect - actual transferred p_msc->csw.data_residue = p_msc->cbw.total_bytes - p_msc->xferred_len; @@ -100,14 +104,12 @@ static inline bool send_csw(uint8_t rhport, mscd_interface_t* p_msc) return usbd_edpt_xfer(rhport, p_msc->ep_in , (uint8_t*) &p_msc->csw, sizeof(msc_csw_t)); } -static inline bool prepare_cbw(uint8_t rhport, mscd_interface_t* p_msc) -{ +static inline bool prepare_cbw(uint8_t rhport, mscd_interface_t* p_msc) { p_msc->stage = MSC_STAGE_CMD; return usbd_edpt_xfer(rhport, p_msc->ep_out, (uint8_t*) &p_msc->cbw, sizeof(msc_cbw_t)); } -static void fail_scsi_op(uint8_t rhport, mscd_interface_t* p_msc, uint8_t status) -{ +static void fail_scsi_op(uint8_t rhport, mscd_interface_t* p_msc, uint8_t status) { msc_cbw_t const * p_cbw = &p_msc->cbw; msc_csw_t * p_csw = &p_msc->csw; @@ -116,24 +118,21 @@ static void fail_scsi_op(uint8_t rhport, mscd_interface_t* p_msc, uint8_t status p_msc->stage = MSC_STAGE_STATUS; // failed but sense key is not set: default to Illegal Request - if ( p_msc->sense_key == 0 ) tud_msc_set_sense(p_cbw->lun, SCSI_SENSE_ILLEGAL_REQUEST, 0x20, 0x00); + if (p_msc->sense_key == 0) { + tud_msc_set_sense(p_cbw->lun, SCSI_SENSE_ILLEGAL_REQUEST, 0x20, 0x00); + } // If there is data stage and not yet complete, stall it - if ( p_cbw->total_bytes && p_csw->data_residue ) - { - if ( is_data_in(p_cbw->dir) ) - { + if (p_cbw->total_bytes && p_csw->data_residue) { + if (is_data_in(p_cbw->dir)) { usbd_edpt_stall(rhport, p_msc->ep_in); - } - else - { + } else { usbd_edpt_stall(rhport, p_msc->ep_out); } } } -static inline uint32_t rdwr10_get_lba(uint8_t const command[]) -{ +static inline uint32_t rdwr10_get_lba(uint8_t const command[]) { // use offsetof to avoid pointer to the odd/unaligned address uint32_t const lba = tu_unaligned_read32(command + offsetof(scsi_write10_t, lba)); @@ -141,14 +140,12 @@ static inline uint32_t rdwr10_get_lba(uint8_t const command[]) return tu_ntohl(lba); } -static inline uint16_t rdwr10_get_blockcount(msc_cbw_t const* cbw) -{ +static inline uint16_t rdwr10_get_blockcount(msc_cbw_t const* cbw) { uint16_t const block_count = tu_unaligned_read16(cbw->command + offsetof(scsi_write10_t, block_count)); return tu_ntohs(block_count); } -static inline uint16_t rdwr10_get_blocksize(msc_cbw_t const* cbw) -{ +static inline uint16_t rdwr10_get_blocksize(msc_cbw_t const* cbw) { // first extract block count in the command uint16_t const block_count = rdwr10_get_blockcount(cbw); @@ -158,40 +155,28 @@ static inline uint16_t rdwr10_get_blocksize(msc_cbw_t const* cbw) return (uint16_t) (cbw->total_bytes / block_count); } -uint8_t rdwr10_validate_cmd(msc_cbw_t const* cbw) -{ +uint8_t rdwr10_validate_cmd(msc_cbw_t const* cbw) { uint8_t status = MSC_CSW_STATUS_PASSED; uint16_t const block_count = rdwr10_get_blockcount(cbw); - if ( cbw->total_bytes == 0 ) - { - if ( block_count ) - { + if (cbw->total_bytes == 0) { + if (block_count) { TU_LOG_DRV(" SCSI case 2 (Hn < Di) or case 3 (Hn < Do) \r\n"); status = MSC_CSW_STATUS_PHASE_ERROR; - }else - { + } else { // no data transfer, only exist in complaint test suite } - }else - { - if ( SCSI_CMD_READ_10 == cbw->command[0] && !is_data_in(cbw->dir) ) - { + } else { + if (SCSI_CMD_READ_10 == cbw->command[0] && !is_data_in(cbw->dir)) { TU_LOG_DRV(" SCSI case 10 (Ho <> Di)\r\n"); status = MSC_CSW_STATUS_PHASE_ERROR; - } - else if ( SCSI_CMD_WRITE_10 == cbw->command[0] && is_data_in(cbw->dir) ) - { + } else if (SCSI_CMD_WRITE_10 == cbw->command[0] && is_data_in(cbw->dir)) { TU_LOG_DRV(" SCSI case 8 (Hi <> Do)\r\n"); status = MSC_CSW_STATUS_PHASE_ERROR; - } - else if ( 0 == block_count ) - { + } else if (0 == block_count) { TU_LOG_DRV(" SCSI case 4 Hi > Dn (READ10) or case 9 Ho > Dn (WRITE10) \r\n"); - status = MSC_CSW_STATUS_FAILED; - } - else if ( cbw->total_bytes / block_count == 0 ) - { + status = MSC_CSW_STATUS_FAILED; + } else if (cbw->total_bytes / block_count == 0) { TU_LOG_DRV(" Computed block size = 0. SCSI case 7 Hi < Di (READ10) or case 13 Ho < Do (WRIT10)\r\n"); status = MSC_CSW_STATUS_PHASE_ERROR; } @@ -205,8 +190,7 @@ uint8_t rdwr10_validate_cmd(msc_cbw_t const* cbw) //--------------------------------------------------------------------+ #if CFG_TUSB_DEBUG >= CFG_TUD_MSC_LOG_LEVEL -TU_ATTR_UNUSED tu_static tu_lookup_entry_t const _msc_scsi_cmd_lookup[] = -{ +TU_ATTR_UNUSED tu_static tu_lookup_entry_t const _msc_scsi_cmd_lookup[] = { { .key = SCSI_CMD_TEST_UNIT_READY , .data = "Test Unit Ready" }, { .key = SCSI_CMD_INQUIRY , .data = "Inquiry" }, { .key = SCSI_CMD_MODE_SELECT_6 , .data = "Mode_Select 6" }, @@ -220,8 +204,7 @@ TU_ATTR_UNUSED tu_static tu_lookup_entry_t const _msc_scsi_cmd_lookup[] = { .key = SCSI_CMD_WRITE_10 , .data = "Write10" } }; -TU_ATTR_UNUSED tu_static tu_lookup_table_t const _msc_scsi_cmd_table = -{ +TU_ATTR_UNUSED tu_static tu_lookup_table_t const _msc_scsi_cmd_table = { .count = TU_ARRAY_SIZE(_msc_scsi_cmd_lookup), .items = _msc_scsi_cmd_lookup }; @@ -462,7 +445,7 @@ bool mscd_xfer_cb(uint8_t rhport, uint8_t ep_addr, xfer_result_t event, uint32_t // 2. IN & Zero: Process if is built-in, else Invoke app callback. Skip DATA if zero length if ( (p_cbw->total_bytes > 0 ) && !is_data_in(p_cbw->dir) ) { - if (p_cbw->total_bytes > sizeof(_mscd_buf)) + if (p_cbw->total_bytes > CFG_TUD_MSC_EP_BUFSIZE) { TU_LOG_DRV(" SCSI reject non READ10/WRITE10 with large data\r\n"); fail_scsi_op(rhport, p_msc, MSC_CSW_STATUS_FAILED); @@ -470,17 +453,17 @@ bool mscd_xfer_cb(uint8_t rhport, uint8_t ep_addr, xfer_result_t event, uint32_t { // Didn't check for case 9 (Ho > Dn), which requires examining scsi command first // but it is OK to just receive data then responded with failed status - TU_ASSERT( usbd_edpt_xfer(rhport, p_msc->ep_out, _mscd_buf, (uint16_t) p_msc->total_len) ); + TU_ASSERT( usbd_edpt_xfer(rhport, p_msc->ep_out, p_msc->ep_buf, (uint16_t) p_msc->total_len) ); } }else { // First process if it is a built-in commands - int32_t resplen = proc_builtin_scsi(p_cbw->lun, p_cbw->command, _mscd_buf, sizeof(_mscd_buf)); + int32_t resplen = proc_builtin_scsi(p_cbw->lun, p_cbw->command, p_msc->ep_buf, CFG_TUD_MSC_EP_BUFSIZE); // Invoke user callback if not built-in if ( (resplen < 0) && (p_msc->sense_key == 0) ) { - resplen = tud_msc_scsi_cb(p_cbw->lun, p_cbw->command, _mscd_buf, (uint16_t) p_msc->total_len); + resplen = tud_msc_scsi_cb(p_cbw->lun, p_cbw->command, p_msc->ep_buf, (uint16_t) p_msc->total_len); } if ( resplen < 0 ) @@ -513,7 +496,7 @@ bool mscd_xfer_cb(uint8_t rhport, uint8_t ep_addr, xfer_result_t event, uint32_t { // cannot return more than host expect p_msc->total_len = tu_min32((uint32_t) resplen, p_cbw->total_bytes); - TU_ASSERT( usbd_edpt_xfer(rhport, p_msc->ep_in, _mscd_buf, (uint16_t) p_msc->total_len) ); + TU_ASSERT( usbd_edpt_xfer(rhport, p_msc->ep_in, p_msc->ep_buf, (uint16_t) p_msc->total_len) ); } } } @@ -522,7 +505,7 @@ bool mscd_xfer_cb(uint8_t rhport, uint8_t ep_addr, xfer_result_t event, uint32_t case MSC_STAGE_DATA: TU_LOG_DRV(" SCSI Data [Lun%u]\r\n", p_cbw->lun); - //TU_LOG_MEM(MSC_DEBUG, _mscd_buf, xferred_bytes, 2); + //TU_LOG_MEM(MSC_DEBUG, p_msc->ep_buf, xferred_bytes, 2); if (SCSI_CMD_READ_10 == p_cbw->command[0]) { @@ -548,7 +531,7 @@ bool mscd_xfer_cb(uint8_t rhport, uint8_t ep_addr, xfer_result_t event, uint32_t // OUT transfer, invoke callback if needed if ( !is_data_in(p_cbw->dir) ) { - int32_t cb_result = tud_msc_scsi_cb(p_cbw->lun, p_cbw->command, _mscd_buf, (uint16_t) p_msc->total_len); + int32_t cb_result = tud_msc_scsi_cb(p_cbw->lun, p_cbw->command, p_msc->ep_buf, (uint16_t) p_msc->total_len); if ( cb_result < 0 ) { @@ -861,11 +844,11 @@ static void proc_read10_cmd(uint8_t rhport, mscd_interface_t* p_msc) uint32_t const lba = rdwr10_get_lba(p_cbw->command) + (p_msc->xferred_len / block_sz); // remaining bytes capped at class buffer - int32_t nbytes = (int32_t) tu_min32(sizeof(_mscd_buf), p_cbw->total_bytes-p_msc->xferred_len); + int32_t nbytes = (int32_t) tu_min32(CFG_TUD_MSC_EP_BUFSIZE, p_cbw->total_bytes-p_msc->xferred_len); // Application can consume smaller bytes uint32_t const offset = p_msc->xferred_len % block_sz; - nbytes = tud_msc_read10_cb(p_cbw->lun, lba, offset, _mscd_buf, (uint32_t) nbytes); + nbytes = tud_msc_read10_cb(p_cbw->lun, lba, offset, p_msc->ep_buf, (uint32_t) nbytes); if ( nbytes < 0 ) { @@ -884,7 +867,7 @@ static void proc_read10_cmd(uint8_t rhport, mscd_interface_t* p_msc) } else { - TU_ASSERT( usbd_edpt_xfer(rhport, p_msc->ep_in, _mscd_buf, (uint16_t) nbytes), ); + TU_ASSERT( usbd_edpt_xfer(rhport, p_msc->ep_in, p_msc->ep_buf, (uint16_t) nbytes), ); } } @@ -908,10 +891,10 @@ static void proc_write10_cmd(uint8_t rhport, mscd_interface_t* p_msc) } // remaining bytes capped at class buffer - uint16_t nbytes = (uint16_t) tu_min32(sizeof(_mscd_buf), p_cbw->total_bytes-p_msc->xferred_len); + uint16_t nbytes = (uint16_t) tu_min32(CFG_TUD_MSC_EP_BUFSIZE, p_cbw->total_bytes-p_msc->xferred_len); // Write10 callback will be called later when usb transfer complete - TU_ASSERT( usbd_edpt_xfer(rhport, p_msc->ep_out, _mscd_buf, nbytes), ); + TU_ASSERT( usbd_edpt_xfer(rhport, p_msc->ep_out, p_msc->ep_buf, nbytes), ); } // process new data arrived from WRITE10 @@ -927,7 +910,7 @@ static void proc_write10_new_data(uint8_t rhport, mscd_interface_t* p_msc, uint3 // Invoke callback to consume new data uint32_t const offset = p_msc->xferred_len % block_sz; - int32_t nbytes = tud_msc_write10_cb(p_cbw->lun, lba, offset, _mscd_buf, xferred_bytes); + int32_t nbytes = tud_msc_write10_cb(p_cbw->lun, lba, offset, p_msc->ep_buf, xferred_bytes); if ( nbytes < 0 ) { @@ -950,7 +933,7 @@ static void proc_write10_new_data(uint8_t rhport, mscd_interface_t* p_msc, uint3 if ( nbytes > 0 ) { p_msc->xferred_len += (uint16_t) nbytes; - memmove(_mscd_buf, _mscd_buf+nbytes, left_over); + memmove(p_msc->ep_buf, p_msc->ep_buf+nbytes, left_over); } // simulate an transfer complete with adjusted parameters --> callback will be invoked with adjusted parameter diff --git a/src/common/tusb_common.h b/src/common/tusb_common.h index 59cc0fb48..416bad296 100644 --- a/src/common/tusb_common.h +++ b/src/common/tusb_common.h @@ -58,6 +58,9 @@ // Generate a mask with bit from high (31) to low (0) set, e.g TU_GENMASK(3, 0) = 0b1111 #define TU_GENMASK(h, l) ( (UINT32_MAX << (l)) & (UINT32_MAX >> (31 - (h))) ) +// DCache padding for variable to occupy full cache line +#define TUD_DCACHE_PADDING uint8_t TU_XSTRCAT(dcache_padding_, _TU_COUNTER_)[CFG_TUD_MEM_DCACHE_ENABLE ? CFG_TUD_MEM_DCACHE_LINE_SIZE : 1] + //--------------------------------------------------------------------+ // Includes //--------------------------------------------------------------------+ diff --git a/src/common/tusb_compiler.h b/src/common/tusb_compiler.h index 646c22b29..9b33a6f61 100644 --- a/src/common/tusb_compiler.h +++ b/src/common/tusb_compiler.h @@ -136,7 +136,7 @@ #define TU_ATTR_SECTION(sec_name) __attribute__ ((section(#sec_name))) #define TU_ATTR_PACKED __attribute__ ((packed)) #define TU_ATTR_WEAK __attribute__ ((weak)) - // #define TU_ATTR_WEAK_ALIAS(f) __attribute__ ((weak, alias(#f)) + // #define TU_ATTR_WEAK_ALIAS(f) __attribute__ ((weak, alias(#f))) #ifndef TU_ATTR_ALWAYS_INLINE // allow to override for debug #define TU_ATTR_ALWAYS_INLINE __attribute__ ((always_inline)) #endif @@ -189,6 +189,7 @@ #define TU_ATTR_SECTION(sec_name) __attribute__ ((section(#sec_name))) #define TU_ATTR_PACKED __attribute__ ((packed)) #define TU_ATTR_WEAK __attribute__ ((weak)) + // #define TU_ATTR_WEAK_ALIAS(f) __attribute__ ((weak, alias(#f))) #define TU_ATTR_ALWAYS_INLINE __attribute__ ((always_inline)) #define TU_ATTR_DEPRECATED(mess) __attribute__ ((deprecated(mess))) // warn if function with this attribute is used #define TU_ATTR_UNUSED __attribute__ ((unused)) // Function/Variable is meant to be possibly unused @@ -216,6 +217,7 @@ #define TU_ATTR_SECTION(sec_name) __attribute__ ((section(#sec_name))) #define TU_ATTR_PACKED __attribute__ ((packed)) #define TU_ATTR_WEAK __attribute__ ((weak)) + // #define TU_ATTR_WEAK_ALIAS(f) __attribute__ ((weak, alias(#f))) #ifndef TU_ATTR_ALWAYS_INLINE // allow to override for debug #define TU_ATTR_ALWAYS_INLINE __attribute__ ((always_inline)) #endif @@ -244,6 +246,7 @@ #define TU_ATTR_SECTION(sec_name) #define TU_ATTR_PACKED #define TU_ATTR_WEAK + // #define TU_ATTR_WEAK_ALIAS(f) #define TU_ATTR_ALWAYS_INLINE #define TU_ATTR_DEPRECATED(mess) #define TU_ATTR_UNUSED diff --git a/src/device/usbd_control.c b/src/device/usbd_control.c index b1fd357aa..59c66eb1e 100644 --- a/src/device/usbd_control.c +++ b/src/device/usbd_control.c @@ -54,6 +54,10 @@ enum { }; typedef struct { + union { + CFG_TUD_MEM_ALIGN uint8_t ep_buf[CFG_TUD_ENDPOINT0_SIZE]; + TUD_DCACHE_PADDING; + }; tusb_control_request_t request; uint8_t* buffer; uint16_t data_len; @@ -61,17 +65,14 @@ typedef struct { usbd_control_xfer_cb_t complete_cb; } usbd_control_xfer_t; -tu_static usbd_control_xfer_t _ctrl_xfer; - -CFG_TUD_MEM_SECTION CFG_TUSB_MEM_ALIGN -tu_static uint8_t _usbd_ctrl_buf[CFG_TUD_ENDPOINT0_SIZE]; +CFG_TUD_MEM_SECTION CFG_TUD_MEM_ALIGN static usbd_control_xfer_t _ctrl_xfer; //--------------------------------------------------------------------+ // Application API //--------------------------------------------------------------------+ // Queue ZLP status transaction -static inline bool _status_stage_xact(uint8_t rhport, tusb_control_request_t const* request) { +static inline bool status_stage_xact(uint8_t rhport, tusb_control_request_t const* request) { // Opposite to endpoint in Data Phase uint8_t const ep_addr = request->bmRequestType_bit.direction ? EDPT_CTRL_OUT : EDPT_CTRL_IN; return usbd_edpt_xfer(rhport, ep_addr, NULL, 0); @@ -84,13 +85,13 @@ bool tud_control_status(uint8_t rhport, tusb_control_request_t const* request) { _ctrl_xfer.total_xferred = 0; _ctrl_xfer.data_len = 0; - return _status_stage_xact(rhport, request); + return status_stage_xact(rhport, request); } // Queue a transaction in Data Stage // Each transaction has up to Endpoint0's max packet size. // This function can also transfer an zero-length packet -static bool _data_stage_xact(uint8_t rhport) { +static bool data_stage_xact(uint8_t rhport) { uint16_t const xact_len = tu_min16(_ctrl_xfer.data_len - _ctrl_xfer.total_xferred, CFG_TUD_ENDPOINT0_SIZE); @@ -99,11 +100,11 @@ static bool _data_stage_xact(uint8_t rhport) { if (_ctrl_xfer.request.bmRequestType_bit.direction == TUSB_DIR_IN) { ep_addr = EDPT_CTRL_IN; if (xact_len) { - TU_VERIFY(0 == tu_memcpy_s(_usbd_ctrl_buf, CFG_TUD_ENDPOINT0_SIZE, _ctrl_xfer.buffer, xact_len)); + TU_VERIFY(0 == tu_memcpy_s(_ctrl_xfer.ep_buf, CFG_TUD_ENDPOINT0_SIZE, _ctrl_xfer.buffer, xact_len)); } } - return usbd_edpt_xfer(rhport, ep_addr, xact_len ? _usbd_ctrl_buf : NULL, xact_len); + return usbd_edpt_xfer(rhport, ep_addr, xact_len ? _ctrl_xfer.ep_buf : NULL, xact_len); } // Transmit data to/from the control endpoint. @@ -122,10 +123,10 @@ bool tud_control_xfer(uint8_t rhport, tusb_control_request_t const* request, voi // TU_LOG2(" Control total data length is %u bytes\r\n", _ctrl_xfer.data_len); // Data stage - TU_ASSERT(_data_stage_xact(rhport)); + TU_ASSERT(data_stage_xact(rhport)); } else { // Status stage - TU_ASSERT(_status_stage_xact(rhport, request)); + TU_ASSERT(status_stage_xact(rhport, request)); } return true; @@ -179,7 +180,7 @@ bool usbd_control_xfer_cb(uint8_t rhport, uint8_t ep_addr, xfer_result_t result, if (_ctrl_xfer.request.bmRequestType_bit.direction == TUSB_DIR_OUT) { TU_VERIFY(_ctrl_xfer.buffer); - memcpy(_ctrl_xfer.buffer, _usbd_ctrl_buf, xferred_bytes); + memcpy(_ctrl_xfer.buffer, _ctrl_xfer.ep_buf, xferred_bytes); TU_LOG_MEM(CFG_TUD_LOG_LEVEL, _usbd_ctrl_buf, xferred_bytes, 2); } @@ -205,7 +206,7 @@ bool usbd_control_xfer_cb(uint8_t rhport, uint8_t ep_addr, xfer_result_t result, if (is_ok) { // Send status - TU_ASSERT(_status_stage_xact(rhport, &_ctrl_xfer.request)); + TU_ASSERT(status_stage_xact(rhport, &_ctrl_xfer.request)); } else { // Stall both IN and OUT control endpoint dcd_edpt_stall(rhport, EDPT_CTRL_OUT); @@ -213,7 +214,7 @@ bool usbd_control_xfer_cb(uint8_t rhport, uint8_t ep_addr, xfer_result_t result, } } else { // More data to transfer - TU_ASSERT(_data_stage_xact(rhport)); + TU_ASSERT(data_stage_xact(rhport)); } return true; diff --git a/src/portable/synopsys/dwc2/dcd_dwc2.c b/src/portable/synopsys/dwc2/dcd_dwc2.c index 363c77761..f2eb80e12 100644 --- a/src/portable/synopsys/dwc2/dcd_dwc2.c +++ b/src/portable/synopsys/dwc2/dcd_dwc2.c @@ -58,11 +58,9 @@ static xfer_ctl_t xfer_status[DWC2_EP_MAX][2]; #define XFER_CTL_BASE(_ep, _dir) (&xfer_status[_ep][_dir]) typedef struct { - CFG_TUD_MEM_ALIGN union { - uint32_t setup_packet[2]; -#if CFG_TUD_MEM_DCACHE_ENABLE - uint8_t setup_packet_cache_padding[CFG_TUD_MEM_DCACHE_LINE_SIZE]; -#endif + union { + CFG_TUD_MEM_ALIGN uint32_t setup_packet[2]; + TUD_DCACHE_PADDING; }; // EP0 transfers are limited to 1 packet - larger sizes has to be split diff --git a/src/tusb_option.h b/src/tusb_option.h index 500d74903..1c8e8aff4 100644 --- a/src/tusb_option.h +++ b/src/tusb_option.h @@ -252,11 +252,7 @@ #define CFG_TUD_DWC2_SLAVE_ENABLE 1 #endif -// DWC2 controller: use DMA for data transfer -// For processors with data cache enabled, USB endpoint buffer region -// (defined by CFG_TUSB_MEM_SECTION) must be declared as non-cacheable. -// For example, on Cortex-M7 the MPU region can be configured as normal -// non-cacheable, with RASR register value: TEX=1 C=0 B=0 S=0. +// Enable DWC2 DMA for device #ifndef CFG_TUD_DWC2_DMA_ENABLE #define CFG_TUD_DWC2_DMA_ENABLE 0 #endif diff --git a/test/hil/tinyusb.json b/test/hil/tinyusb.json index b6c9b540a..8b4ef6d3a 100644 --- a/test/hil/tinyusb.json +++ b/test/hil/tinyusb.json @@ -3,6 +3,9 @@ { "name": "espressif_p4_function_ev", "uid": "6055F9F98715", + "build" : { + "flags_on": ["", "CFG_TUD_DWC2_DMA_ENABLE"] + }, "tests": { "only": ["device/cdc_msc_freertos", "device/hid_composite_freertos", "host/device_info"], "dev_attached": [{"vid_pid": "1a86_55d4", "serial": "52D2002427"}] -- cgit v1.3.1 From 63771086d9beddb9f1b08792dccddbb17daa5ef7 Mon Sep 17 00:00:00 2001 From: hathach Date: Wed, 27 Nov 2024 00:22:56 +0700 Subject: enable dwc2 dma for hil test for esp32s3/p4 and stm32 --- test/hil/tinyusb.json | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'test/hil') diff --git a/test/hil/tinyusb.json b/test/hil/tinyusb.json index 8b4ef6d3a..580481b61 100644 --- a/test/hil/tinyusb.json +++ b/test/hil/tinyusb.json @@ -4,7 +4,7 @@ "name": "espressif_p4_function_ev", "uid": "6055F9F98715", "build" : { - "flags_on": ["", "CFG_TUD_DWC2_DMA_ENABLE"] + "flags_on": ["", "CFG_TUD_DWC2_DMA_ENABLE CFG_TUH_DWC2_DMA_ENABLE"] }, "tests": { "only": ["device/cdc_msc_freertos", "device/hid_composite_freertos", "host/device_info"], @@ -20,7 +20,7 @@ "name": "espressif_s3_devkitm", "uid": "84F703C084E4", "build" : { - "flags_on": ["", "CFG_TUD_DWC2_DMA_ENABLE"] + "flags_on": ["", "CFG_TUD_DWC2_DMA_ENABLE CFG_TUH_DWC2_DMA_ENABLE"] }, "tests": { "only": ["device/cdc_msc_freertos", "device/hid_composite_freertos"] @@ -133,7 +133,7 @@ "name": "stm32f723disco", "uid": "460029001951373031313335", "build" : { - "flags_on": ["", "CFG_TUD_DWC2_DMA_ENABLE"] + "flags_on": ["", "CFG_TUD_DWC2_DMA_ENABLE CFG_TUH_DWC2_DMA_ENABLE"] }, "tests": { "device": true, "host": true, "dual": false, -- cgit v1.3.1 From 453d69517b8f7f019ac855531e9e433d9d158f37 Mon Sep 17 00:00:00 2001 From: hathach Date: Wed, 27 Nov 2024 11:10:06 +0700 Subject: fix multiple flag on compiling --- hw/bsp/espressif/components/tinyusb_src/CMakeLists.txt | 1 + hw/bsp/family_support.cmake | 2 ++ hw/bsp/rp2040/family.cmake | 1 + src/class/msc/msc_device.c | 2 +- test/hil/tinyusb.json | 10 ++++++---- 5 files changed, 11 insertions(+), 5 deletions(-) (limited to 'test/hil') diff --git a/hw/bsp/espressif/components/tinyusb_src/CMakeLists.txt b/hw/bsp/espressif/components/tinyusb_src/CMakeLists.txt index 95fb2e440..00e288bad 100644 --- a/hw/bsp/espressif/components/tinyusb_src/CMakeLists.txt +++ b/hw/bsp/espressif/components/tinyusb_src/CMakeLists.txt @@ -69,6 +69,7 @@ if (DEFINED LOG) endif() if(DEFINED CFLAGS_CLI) + separate_arguments(CFLAGS_CLI) list(APPEND compile_definitions ${CFLAGS_CLI}) endif() diff --git a/hw/bsp/family_support.cmake b/hw/bsp/family_support.cmake index 3f2872a30..82e3badb3 100644 --- a/hw/bsp/family_support.cmake +++ b/hw/bsp/family_support.cmake @@ -206,6 +206,7 @@ function(family_configure_common TARGET RTOS) # compile define from command line if(DEFINED CFLAGS_CLI) + separate_arguments(CFLAGS_CLI) target_compile_options(${TARGET} PUBLIC ${CFLAGS_CLI}) endif() @@ -291,6 +292,7 @@ function(family_add_tinyusb TARGET OPT_MCU RTOS) # compile define from command line if(DEFINED CFLAGS_CLI) + separate_arguments(CFLAGS_CLI) target_compile_options(${TARGET}-tinyusb PUBLIC ${CFLAGS_CLI}) endif() diff --git a/hw/bsp/rp2040/family.cmake b/hw/bsp/rp2040/family.cmake index 8f01eac74..b2b01b1cf 100644 --- a/hw/bsp/rp2040/family.cmake +++ b/hw/bsp/rp2040/family.cmake @@ -191,6 +191,7 @@ function(family_configure_target TARGET RTOS) # compile define from command line if(DEFINED CFLAGS_CLI) + separate_arguments(CFLAGS_CLI) target_compile_options(${TARGET} PUBLIC ${CFLAGS_CLI}) endif() diff --git a/src/class/msc/msc_device.c b/src/class/msc/msc_device.c index cfae646a1..dd66bfb6f 100644 --- a/src/class/msc/msc_device.c +++ b/src/class/msc/msc_device.c @@ -147,7 +147,7 @@ static inline uint16_t rdwr10_get_blocksize(msc_cbw_t const* cbw) { return (uint16_t) (cbw->total_bytes / block_count); } -uint8_t rdwr10_validate_cmd(msc_cbw_t const* cbw) { +static uint8_t rdwr10_validate_cmd(msc_cbw_t const* cbw) { uint8_t status = MSC_CSW_STATUS_PASSED; uint16_t const block_count = rdwr10_get_blockcount(cbw); diff --git a/test/hil/tinyusb.json b/test/hil/tinyusb.json index 580481b61..7393226eb 100644 --- a/test/hil/tinyusb.json +++ b/test/hil/tinyusb.json @@ -14,13 +14,14 @@ "name": "esptool", "uid": "4ea4f48f6bc3ee11bbb9d00f9e1b1c54", "args": "-b 1500000" - } + }, + "comment": "Use TS3USB30 mux to test both device and host" }, { "name": "espressif_s3_devkitm", "uid": "84F703C084E4", "build" : { - "flags_on": ["", "CFG_TUD_DWC2_DMA_ENABLE CFG_TUH_DWC2_DMA_ENABLE"] + "flags_on": ["", "CFG_TUD_DWC2_DMA_ENABLE"] }, "tests": { "only": ["device/cdc_msc_freertos", "device/hid_composite_freertos"] @@ -133,7 +134,7 @@ "name": "stm32f723disco", "uid": "460029001951373031313335", "build" : { - "flags_on": ["", "CFG_TUD_DWC2_DMA_ENABLE CFG_TUH_DWC2_DMA_ENABLE"] + "flags_on": ["", "CFG_TUH_DWC2_DMA_ENABLE"] }, "tests": { "device": true, "host": true, "dual": false, @@ -143,7 +144,8 @@ "name": "jlink", "uid": "000776606156", "args": "-device stm32f723ie" - } + }, + "comment": "Device port0 FS (slave only), Host port1 HS with DMA" }, { "name": "stm32h743nucleo", -- cgit v1.3.1 From 9e4b855e5309976ead84d6cc65288e0e03f27ba5 Mon Sep 17 00:00:00 2001 From: hathach Date: Wed, 27 Nov 2024 11:35:21 +0700 Subject: minor clean up --- src/class/cdc/cdc_host.c | 8 ++++---- src/class/hid/hid_host.c | 18 +++++++++--------- src/host/usbh.c | 2 -- src/host/usbh.h | 2 -- test/hil/hil_test.py | 2 +- tools/build.py | 2 +- 6 files changed, 15 insertions(+), 19 deletions(-) (limited to 'test/hil') diff --git a/src/class/cdc/cdc_host.c b/src/class/cdc/cdc_host.c index d92fd875d..e817ebc7e 100644 --- a/src/class/cdc/cdc_host.c +++ b/src/class/cdc/cdc_host.c @@ -78,8 +78,8 @@ typedef struct { } cdch_interface_t; typedef struct { - TUH_EPBUF_DEF(tx_ep_buf, CFG_TUH_CDC_TX_EPSIZE); - TUH_EPBUF_DEF(rx_ep_buf, CFG_TUH_CDC_TX_EPSIZE); + TUH_EPBUF_DEF(tx, CFG_TUH_CDC_TX_EPSIZE); + TUH_EPBUF_DEF(rx, CFG_TUH_CDC_TX_EPSIZE); } cdch_epbuf_t; static cdch_interface_t cdch_data[CFG_TUH_CDC]; @@ -631,11 +631,11 @@ bool cdch_init(void) { cdch_epbuf_t* epbuf = &cdch_epbuf[i]; tu_edpt_stream_init(&p_cdc->stream.tx, true, true, false, p_cdc->stream.tx_ff_buf, CFG_TUH_CDC_TX_BUFSIZE, - epbuf->tx_ep_buf, CFG_TUH_CDC_TX_EPSIZE); + epbuf->tx, CFG_TUH_CDC_TX_EPSIZE); tu_edpt_stream_init(&p_cdc->stream.rx, true, false, false, p_cdc->stream.rx_ff_buf, CFG_TUH_CDC_RX_BUFSIZE, - epbuf->rx_ep_buf, CFG_TUH_CDC_RX_EPSIZE); + epbuf->rx, CFG_TUH_CDC_RX_EPSIZE); } return true; diff --git a/src/class/hid/hid_host.c b/src/class/hid/hid_host.c index 5ce47606d..eef584d74 100644 --- a/src/class/hid/hid_host.c +++ b/src/class/hid/hid_host.c @@ -61,8 +61,8 @@ typedef struct { } hidh_interface_t; typedef struct { - TUH_EPBUF_DEF(epin_buf, CFG_TUH_HID_EPIN_BUFSIZE); - TUH_EPBUF_DEF(epout_buf, CFG_TUH_HID_EPOUT_BUFSIZE); + TUH_EPBUF_DEF(epin, CFG_TUH_HID_EPIN_BUFSIZE); + TUH_EPBUF_DEF(epout, CFG_TUH_HID_EPOUT_BUFSIZE); } hidh_epbuf_t; static hidh_interface_t _hidh_itf[CFG_TUH_HID]; @@ -363,7 +363,7 @@ bool tuh_hid_receive_report(uint8_t daddr, uint8_t idx) { // claim endpoint TU_VERIFY(usbh_edpt_claim(daddr, p_hid->ep_in)); - if (!usbh_edpt_xfer(daddr, p_hid->ep_in, epbuf->epin_buf, p_hid->epin_size)) { + if (!usbh_edpt_xfer(daddr, p_hid->ep_in, epbuf->epin, p_hid->epin_size)) { usbh_edpt_release(daddr, p_hid->ep_in); return false; } @@ -403,16 +403,16 @@ bool tuh_hid_send_report(uint8_t daddr, uint8_t idx, uint8_t report_id, const vo if (report_id == 0) { // No report ID in transmission - memcpy(&epbuf->epout_buf[0], report, len); + memcpy(&epbuf->epout[0], report, len); } else { - epbuf->epout_buf[0] = report_id; - memcpy(&epbuf->epout_buf[1], report, len); + epbuf->epout[0] = report_id; + memcpy(&epbuf->epout[1], report, len); ++len; // 1 more byte for report_id } TU_LOG3_MEM(p_hid->epout_buf, len, 2); - if (!usbh_edpt_xfer(daddr, p_hid->ep_out, epbuf->epout_buf, len)) { + if (!usbh_edpt_xfer(daddr, p_hid->ep_out, epbuf->epout, len)) { usbh_edpt_release(daddr, p_hid->ep_out); return false; } @@ -446,10 +446,10 @@ bool hidh_xfer_cb(uint8_t daddr, uint8_t ep_addr, xfer_result_t result, uint32_t if (dir == TUSB_DIR_IN) { TU_LOG_DRV(" Get Report callback (%u, %u)\r\n", daddr, idx); TU_LOG3_MEM(p_hid->epin_buf, xferred_bytes, 2); - tuh_hid_report_received_cb(daddr, idx, epbuf->epin_buf, (uint16_t) xferred_bytes); + tuh_hid_report_received_cb(daddr, idx, epbuf->epin, (uint16_t) xferred_bytes); } else { if (tuh_hid_report_sent_cb) { - tuh_hid_report_sent_cb(daddr, idx, epbuf->epout_buf, (uint16_t) xferred_bytes); + tuh_hid_report_sent_cb(daddr, idx, epbuf->epout, (uint16_t) xferred_bytes); } } diff --git a/src/host/usbh.c b/src/host/usbh.c index 73753a713..a9a692455 100644 --- a/src/host/usbh.c +++ b/src/host/usbh.c @@ -1477,8 +1477,6 @@ static void process_enumeration(tuh_xfer_t* xfer) { dev->i_product = desc_device->iProduct; dev->i_serial = desc_device->iSerialNumber; - // if (tuh_attach_cb) tuh_attach_cb((tusb_desc_device_t*) _usbh_epbuf.ctrl); - // Get 9-byte for total length uint8_t const config_idx = CONFIG_NUM - 1; TU_LOG_USBH("Get Configuration[0] Descriptor (9 bytes)\r\n"); diff --git a/src/host/usbh.h b/src/host/usbh.h index 20fad284e..72c237573 100644 --- a/src/host/usbh.h +++ b/src/host/usbh.h @@ -96,8 +96,6 @@ typedef union { // APPLICATION CALLBACK //--------------------------------------------------------------------+ -//TU_ATTR_WEAK uint8_t tuh_attach_cb (tusb_desc_device_t const *desc_device); - // Invoked when a device is mounted (configured) TU_ATTR_WEAK void tuh_mount_cb (uint8_t daddr); diff --git a/test/hil/hil_test.py b/test/hil/hil_test.py index f125c0d28..a9f5dc1e1 100755 --- a/test/hil/hil_test.py +++ b/test/hil/hil_test.py @@ -549,7 +549,7 @@ def test_board(board): for f1 in flags_on_list: f1_str = "" if f1 != "": - f1_str = '-' + f1.replace(' ', '-') + f1_str = '-f1_' + f1.replace(' ', '_') for test in test_list: fw_dir = f'{TINYUSB_ROOT}/cmake-build/cmake-build-{name}{f1_str}/{test}' if not os.path.exists(fw_dir): diff --git a/tools/build.py b/tools/build.py index 48666adc4..3a9239bc2 100755 --- a/tools/build.py +++ b/tools/build.py @@ -90,7 +90,7 @@ def cmake_board(board, toolchain, build_flags_on): if len(build_flags_on) > 0: build_flags = ' '.join(f'-D{flag}=1' for flag in build_flags_on) build_flags = f'-DCFLAGS_CLI="{build_flags}"' - build_dir += '-' + '-'.join(build_flags_on) + build_dir += '-f1_' + '_'.join(build_flags_on) family = find_family(board) if family == 'espressif': -- cgit v1.3.1 From e54753814befa26742fa8a9805f5b7beac32a963 Mon Sep 17 00:00:00 2001 From: hathach Date: Fri, 21 Mar 2025 00:11:18 +0700 Subject: enable hil dual for metro m4 with max3421 --- examples/host/device_info/src/main.c | 2 +- src/host/usbh.h | 9 +++------ test/hil/tinyusb.json | 2 +- 3 files changed, 5 insertions(+), 8 deletions(-) (limited to 'test/hil') diff --git a/examples/host/device_info/src/main.c b/examples/host/device_info/src/main.c index 775968c16..ac4c46a11 100644 --- a/examples/host/device_info/src/main.c +++ b/examples/host/device_info/src/main.c @@ -81,7 +81,7 @@ void init_freertos_task(void); //-------------------------------------------------------------------- // Main //-------------------------------------------------------------------- -void init_tinyusb(void) { +static void init_tinyusb(void) { // init host stack on configured roothub port tusb_rhport_init_t host_init = { .role = TUSB_ROLE_HOST, diff --git a/src/host/usbh.h b/src/host/usbh.h index 52b4f478c..36bb7c9b2 100644 --- a/src/host/usbh.h +++ b/src/host/usbh.h @@ -155,8 +155,7 @@ bool tuh_inited(void); void tuh_task_ext(uint32_t timeout_ms, bool in_isr); // Task function should be called in main/rtos loop -TU_ATTR_ALWAYS_INLINE static inline -void tuh_task(void) { +TU_ATTR_ALWAYS_INLINE static inline void tuh_task(void) { tuh_task_ext(UINT32_MAX, false); } @@ -197,16 +196,14 @@ bool tuh_mounted(uint8_t daddr); bool tuh_connected(uint8_t daddr); // Check if device is suspended -TU_ATTR_ALWAYS_INLINE static inline -bool tuh_suspended(uint8_t daddr) { +TU_ATTR_ALWAYS_INLINE static inline bool tuh_suspended(uint8_t daddr) { // TODO implement suspend & resume on host (void) daddr; return false; } // Check if device is ready to communicate with -TU_ATTR_ALWAYS_INLINE static inline -bool tuh_ready(uint8_t daddr) { +TU_ATTR_ALWAYS_INLINE static inline bool tuh_ready(uint8_t daddr) { return tuh_mounted(daddr) && !tuh_suspended(daddr); } diff --git a/test/hil/tinyusb.json b/test/hil/tinyusb.json index 7393226eb..c2bbdf5a3 100644 --- a/test/hil/tinyusb.json +++ b/test/hil/tinyusb.json @@ -60,7 +60,7 @@ "name": "metro_m4_express", "uid": "9995AD485337433231202020FF100A34", "tests": { - "device": true, "host": false, "dual": false, + "device": true, "host": false, "dual": true, "dev_attached": [{"vid_pid": "1a86_55d4", "serial": "52D2002130"}] }, "flasher": { -- cgit v1.3.1 From 875e645b324082a00072a45ae64a8fcdace7303a Mon Sep 17 00:00:00 2001 From: hathach Date: Mon, 24 Mar 2025 23:20:54 +0700 Subject: update hil test to include dual and host for pico/pico2 --- examples/dual/host_info_to_device_cdc/src/main.c | 121 ++++++++++++----------- test/hil/hil_test.py | 22 +++-- test/hil/tinyusb.json | 4 +- 3 files changed, 79 insertions(+), 68 deletions(-) (limited to 'test/hil') diff --git a/examples/dual/host_info_to_device_cdc/src/main.c b/examples/dual/host_info_to_device_cdc/src/main.c index 668808db2..c1017141c 100644 --- a/examples/dual/host_info_to_device_cdc/src/main.c +++ b/examples/dual/host_info_to_device_cdc/src/main.c @@ -70,8 +70,11 @@ enum { static uint32_t blink_interval_ms = BLINK_NOT_MOUNTED; static bool is_print[CFG_TUH_DEVICE_MAX+1] = { 0 }; +static tusb_desc_device_t descriptor_device[CFG_TUH_DEVICE_MAX+1]; static void print_utf16(uint16_t *temp_buf, size_t buf_len); +static void print_device_info(uint8_t daddr, const tusb_desc_device_t* desc_device); + void led_blinking_task(void); void cdc_task(void); @@ -135,33 +138,51 @@ void tud_resume_cb(void) { blink_interval_ms = tud_mounted() ? BLINK_MOUNTED : BLINK_NOT_MOUNTED; } -#if 1 +void cdc_task(void) { + if (!tud_cdc_connected()) { + // delay a bit otherwise we can outpace host's terminal. Linux will set LineState (DTR) then Line Coding. + // If we send data before Linux's terminal set Line Coding, it can be ignored --> missing data with hardware test loop + board_delay(10); + return; + } + + for (uint8_t daddr = 1; daddr <= CFG_TUH_DEVICE_MAX; daddr++) { + if (tuh_mounted(daddr)) { + if (is_print[daddr]) { + is_print[daddr] = false; + print_device_info(daddr, &descriptor_device[daddr]); + } + } + } +} + +//--------------------------------------------------------------------+ +// Host Get device information +//--------------------------------------------------------------------+ #define cdc_printf(...) \ do { \ char _tempbuf[256]; \ - int count = sprintf(_tempbuf, __VA_ARGS__); \ - tud_cdc_write(_tempbuf, (uint32_t) count); \ - tud_cdc_write_flush(); \ - tud_task(); \ + char* _bufptr = _tempbuf; \ + uint32_t count = (uint32_t) sprintf(_tempbuf, __VA_ARGS__); \ + while (count > 0) { \ + uint32_t wr_count = tud_cdc_write(_bufptr, count); \ + count -= wr_count; \ + _bufptr += wr_count; \ + if (count > 0){ \ + tud_task();\ + tud_cdc_write_flush(); \ + } \ + } \ } while(0) -#endif - -//#define cdc_printf printf - -void print_device_info(uint8_t daddr) { - tusb_desc_device_t desc_device; - uint8_t xfer_result = tuh_descriptor_get_device_sync(daddr, &desc_device, 18); - if (XFER_RESULT_SUCCESS != xfer_result) { - tud_cdc_write_str("Failed to get device descriptor\r\n"); - return; - } +static void print_device_info(uint8_t daddr, const tusb_desc_device_t* desc_device) { // Get String descriptor using Sync API uint16_t serial[64]; uint16_t buf[128]; + (void) buf; - cdc_printf("Device %u: ID %04x:%04x SN ", daddr, desc_device.idVendor, desc_device.idProduct); - xfer_result = tuh_descriptor_get_serial_string_sync(daddr, LANGUAGE_ID, serial, sizeof(serial)); + cdc_printf("Device %u: ID %04x:%04x SN ", daddr, desc_device->idVendor, desc_device->idProduct); + uint8_t xfer_result = tuh_descriptor_get_serial_string_sync(daddr, LANGUAGE_ID, serial, sizeof(serial)); if (XFER_RESULT_SUCCESS != xfer_result) { serial[0] = 'n'; serial[1] = '/'; @@ -169,58 +190,46 @@ void print_device_info(uint8_t daddr) { serial[3] = 0; } print_utf16(serial, TU_ARRAY_SIZE(serial)); - tud_cdc_write_str("\r\n"); + cdc_printf("\r\n"); cdc_printf("Device Descriptor:\r\n"); - cdc_printf(" bLength %u\r\n" , desc_device.bLength); - cdc_printf(" bDescriptorType %u\r\n" , desc_device.bDescriptorType); - cdc_printf(" bcdUSB %04x\r\n" , desc_device.bcdUSB); - cdc_printf(" bDeviceClass %u\r\n" , desc_device.bDeviceClass); - cdc_printf(" bDeviceSubClass %u\r\n" , desc_device.bDeviceSubClass); - cdc_printf(" bDeviceProtocol %u\r\n" , desc_device.bDeviceProtocol); - cdc_printf(" bMaxPacketSize0 %u\r\n" , desc_device.bMaxPacketSize0); - cdc_printf(" idVendor 0x%04x\r\n" , desc_device.idVendor); - cdc_printf(" idProduct 0x%04x\r\n" , desc_device.idProduct); - cdc_printf(" bcdDevice %04x\r\n" , desc_device.bcdDevice); - - cdc_printf(" iManufacturer %u " , desc_device.iManufacturer); + cdc_printf(" bLength %u\r\n" , desc_device->bLength); + cdc_printf(" bDescriptorType %u\r\n" , desc_device->bDescriptorType); + cdc_printf(" bcdUSB %04x\r\n" , desc_device->bcdUSB); + cdc_printf(" bDeviceClass %u\r\n" , desc_device->bDeviceClass); + cdc_printf(" bDeviceSubClass %u\r\n" , desc_device->bDeviceSubClass); + cdc_printf(" bDeviceProtocol %u\r\n" , desc_device->bDeviceProtocol); + cdc_printf(" bMaxPacketSize0 %u\r\n" , desc_device->bMaxPacketSize0); + cdc_printf(" idVendor 0x%04x\r\n" , desc_device->idVendor); + cdc_printf(" idProduct 0x%04x\r\n" , desc_device->idProduct); + cdc_printf(" bcdDevice %04x\r\n" , desc_device->bcdDevice); + + cdc_printf(" iManufacturer %u " , desc_device->iManufacturer); xfer_result = tuh_descriptor_get_manufacturer_string_sync(daddr, LANGUAGE_ID, buf, sizeof(buf)); - if (XFER_RESULT_SUCCESS == xfer_result ) { + if (XFER_RESULT_SUCCESS == xfer_result) { print_utf16(buf, TU_ARRAY_SIZE(buf)); } - tud_cdc_write_str("\r\n"); + cdc_printf("\r\n"); - cdc_printf(" iProduct %u " , desc_device.iProduct); + cdc_printf(" iProduct %u " , desc_device->iProduct); xfer_result = tuh_descriptor_get_product_string_sync(daddr, LANGUAGE_ID, buf, sizeof(buf)); if (XFER_RESULT_SUCCESS == xfer_result) { print_utf16(buf, TU_ARRAY_SIZE(buf)); } - tud_cdc_write_str("\r\n"); + cdc_printf("\r\n"); - cdc_printf(" iSerialNumber %u " , desc_device.iSerialNumber); - tud_cdc_write_str((char*)serial); // serial is already to UTF-8 - tud_cdc_write_str("\r\n"); + cdc_printf(" iSerialNumber %u " , desc_device->iSerialNumber); + cdc_printf((char*)serial); // serial is already to UTF-8 + cdc_printf("\r\n"); - cdc_printf(" bNumConfigurations %u\r\n" , desc_device.bNumConfigurations); + cdc_printf(" bNumConfigurations %u\r\n" , desc_device->bNumConfigurations); } -void cdc_task(void) { - if (tud_cdc_connected()) { - for (uint8_t daddr = 1; daddr <= CFG_TUH_DEVICE_MAX; daddr++) { - if (tuh_mounted(daddr)) { - if (is_print[daddr]) { - is_print[daddr] = false; - print_device_info(daddr); - tud_cdc_write_flush(); - } - } - } - } +void tuh_enum_descriptor_device_cb(uint8_t daddr, tusb_desc_device_t const* desc_device) { + (void) daddr; + descriptor_device[daddr] = *desc_device; // save device descriptor } -//--------------------------------------------------------------------+ -// Host Get device information -//--------------------------------------------------------------------+ void tuh_mount_cb(uint8_t daddr) { printf("mounted device %u\r\n", daddr); is_print[daddr] = true; @@ -296,7 +305,5 @@ static void print_utf16(uint16_t *temp_buf, size_t buf_len) { _convert_utf16le_to_utf8(temp_buf + 1, utf16_len, (uint8_t *) temp_buf, sizeof(uint16_t) * buf_len); ((uint8_t*) temp_buf)[utf8_len] = '\0'; - tud_cdc_write(temp_buf, utf8_len); - tud_cdc_write_flush(); - tud_task(); + cdc_printf((char*) temp_buf); } diff --git a/test/hil/hil_test.py b/test/hil/hil_test.py index a9f5dc1e1..11b67082c 100755 --- a/test/hil/hil_test.py +++ b/test/hil/hil_test.py @@ -81,7 +81,7 @@ def get_serial_dev(id, vendor_str, product_str, ifnum): return f'/dev/serial/by-id/usb-{vendor_str}_{product_str}_{id}-if{ifnum:02d}' else: # just use id: mostly for cp210x/ftdi flasher - pattern = f'/dev/serial/by-id/usb-*_{id}-if{ifnum:02d}*' + pattern = f'/dev/serial/by-id/usb-*_{id}-if*' port_list = glob.glob(pattern) return port_list[0] @@ -98,18 +98,19 @@ def get_hid_dev(id, vendor_str, product_str, event): def open_serial_dev(port): timeout = ENUM_TIMEOUT ser = None + t_step = 0.1 while timeout: if os.path.exists(port): try: # slight delay since kernel may occupy the port briefly - time.sleep(0.5) - timeout = timeout - 0.5 + time.sleep(t_step) + timeout = timeout - t_step ser = serial.Serial(port, baudrate=115200, timeout=5) break except serial.SerialException: pass - time.sleep(0.5) - timeout = timeout - 0.5 + time.sleep(t_step) + timeout = timeout - t_step assert timeout, f'Cannot open port f{port}' if os.path.exists(port) else f'Port {port} not existed' return ser @@ -202,14 +203,14 @@ def reset_stflash(board): def flash_openocd(board, firmware): flasher = board['flasher'] ret = run_cmd(f'openocd -c "tcl_port disabled" -c "gdb_port disabled" -c "adapter serial {flasher["uid"]}" ' - f'{flasher["args"]} -c init -c halt -c "program {firmware}.elf verify" -c reset -c exit') + f'{flasher["args"]} -c "init; halt; program {firmware}.elf verify; reset; exit"') return ret def reset_openocd(board): flasher = board['flasher'] ret = run_cmd(f'openocd -c "tcl_port disabled" -c "gdb_port disabled" -c "adapter serial {flasher["uid"]}" ' - f'{flasher["args"]} -c "reset exit"') + f'{flasher["args"]} -c "init; reset run; exit"') return ret @@ -310,6 +311,9 @@ def test_dual_host_info_to_device_cdc(board): assert False, 'No data from device' lines = data.decode('utf-8').splitlines() + if verbose: + print('\n'.join(lines)) + enum_dev_sn = [] for l in lines: vid_pid_sn = re.search(r'ID ([0-9a-fA-F]+):([0-9a-fA-F]+) SN (\w+)', l) @@ -577,10 +581,10 @@ def test_board(board): print(f' {e}') else: print() - print(f' Test failed: {e}, retry {i+1}') + print(f' Test failed: {e}, retry {i+2}/{max_rety}') time.sleep(1) else: - print(f'Flashing failed, retry {i+1}') + print(f'Flashing failed, retry {i+2}/{max_rety}') time.sleep(1) if ret.returncode != 0: diff --git a/test/hil/tinyusb.json b/test/hil/tinyusb.json index c2bbdf5a3..e702ffe9f 100644 --- a/test/hil/tinyusb.json +++ b/test/hil/tinyusb.json @@ -99,7 +99,7 @@ "name": "raspberry_pi_pico", "uid": "E6614C311B764A37", "tests": { - "device": true, "host": false, "dual": false, + "device": true, "host": true, "dual": true, "dev_attached": [{"vid_pid": "1a86_55d4", "serial": "52D2002470"}] }, "flasher": { @@ -112,7 +112,7 @@ "name": "raspberry_pi_pico2", "uid": "560AE75E1C7152C9", "tests": { - "device": true, "host": false, "dual": false, + "device": true, "host": true, "dual": true, "dev_attached": [{"vid_pid": "1a86_55d4", "serial": "533D004242"}] }, "flasher": { -- cgit v1.3.1 From 1fd5c123162519a21a09c0f8030e9fbbad63cd3b Mon Sep 17 00:00:00 2001 From: hathach Date: Tue, 25 Mar 2025 10:43:55 +0700 Subject: HIL: add flag CFG_TUH_RPI_PIO_USB to pico/pico2 --- test/hil/hil_test.py | 5 ++--- test/hil/tinyusb.json | 6 ++++++ 2 files changed, 8 insertions(+), 3 deletions(-) (limited to 'test/hil') diff --git a/test/hil/hil_test.py b/test/hil/hil_test.py index 11b67082c..8b83731c4 100755 --- a/test/hil/hil_test.py +++ b/test/hil/hil_test.py @@ -311,9 +311,6 @@ def test_dual_host_info_to_device_cdc(board): assert False, 'No data from device' lines = data.decode('utf-8').splitlines() - if verbose: - print('\n'.join(lines)) - enum_dev_sn = [] for l in lines: vid_pid_sn = re.search(r'ID ([0-9a-fA-F]+):([0-9a-fA-F]+) SN (\w+)', l) @@ -323,6 +320,7 @@ def test_dual_host_info_to_device_cdc(board): if set(declared_devs) != set(enum_dev_sn): failed_msg = f'Expected {declared_devs}, Enumerated {enum_dev_sn}' + print('\n'.join(lines)) assert False, failed_msg return 0 @@ -356,6 +354,7 @@ def test_host_device_info(board): if set(declared_devs) != set(enum_dev_sn): failed_msg = f'Expected {declared_devs}, Enumerated {enum_dev_sn}' + print('\n'.join(lines)) assert False, failed_msg return 0 diff --git a/test/hil/tinyusb.json b/test/hil/tinyusb.json index e702ffe9f..fb4c05c3d 100644 --- a/test/hil/tinyusb.json +++ b/test/hil/tinyusb.json @@ -98,6 +98,9 @@ { "name": "raspberry_pi_pico", "uid": "E6614C311B764A37", + "build" : { + "flags_on": ["CFG_TUH_RPI_PIO_USB"] + }, "tests": { "device": true, "host": true, "dual": true, "dev_attached": [{"vid_pid": "1a86_55d4", "serial": "52D2002470"}] @@ -111,6 +114,9 @@ { "name": "raspberry_pi_pico2", "uid": "560AE75E1C7152C9", + "build" : { + "flags_on": ["CFG_TUH_RPI_PIO_USB"] + }, "tests": { "device": true, "host": true, "dual": true, "dev_attached": [{"vid_pid": "1a86_55d4", "serial": "533D004242"}] -- cgit v1.3.1 From b99b811308114d07cbba0d432abc185c05896ec3 Mon Sep 17 00:00:00 2001 From: hathach Date: Tue, 25 Mar 2025 14:43:40 +0700 Subject: more hil improvement --- test/hil/hil_test.py | 37 +++++++++++++++++-------------------- test/hil/tinyusb.json | 4 ++-- 2 files changed, 19 insertions(+), 22 deletions(-) (limited to 'test/hil') diff --git a/test/hil/hil_test.py b/test/hil/hil_test.py index 8b83731c4..017c17018 100755 --- a/test/hil/hil_test.py +++ b/test/hil/hil_test.py @@ -98,21 +98,18 @@ def get_hid_dev(id, vendor_str, product_str, event): def open_serial_dev(port): timeout = ENUM_TIMEOUT ser = None - t_step = 0.1 - while timeout: + while timeout > 0: if os.path.exists(port): try: - # slight delay since kernel may occupy the port briefly - time.sleep(t_step) - timeout = timeout - t_step ser = serial.Serial(port, baudrate=115200, timeout=5) break except serial.SerialException: + print(f'serial {port} not reaady {timeout} sec') pass - time.sleep(t_step) - timeout = timeout - t_step + time.sleep(0.1) + timeout -= 0.1 - assert timeout, f'Cannot open port f{port}' if os.path.exists(port) else f'Port {port} not existed' + assert timeout > 0, f'Cannot open port f{port}' if os.path.exists(port) else f'Port {port} not existed' return ser @@ -120,7 +117,7 @@ def read_disk_file(uid, lun, fname): # open_fs("fat://{dev}) require 'pip install pyfatfs' dev = get_disk_dev(uid, 'TinyUSB', lun) timeout = ENUM_TIMEOUT - while timeout: + while timeout > 0: if os.path.exists(dev): fat = fs.open_fs(f'fat://{dev}?read_only=true') try: @@ -133,7 +130,7 @@ def read_disk_file(uid, lun, fname): time.sleep(1) timeout -= 1 - assert timeout, f'Storage {dev} not existed' + assert timeout > 0, f'Storage {dev} not existed' return None @@ -305,11 +302,11 @@ def test_dual_host_info_to_device_cdc(board): ser = open_serial_dev(port) # read from cdc, first line should contain vid/pid and serial - data = ser.read(1000) + data = ser.read(10000) ser.close() if len(data) == 0: assert False, 'No data from device' - lines = data.decode('utf-8').splitlines() + lines = data.decode('utf-8', errors='ignore').splitlines() enum_dev_sn = [] for l in lines: @@ -339,12 +336,12 @@ def test_host_device_info(board): ret = globals()[f'reset_{flasher["name"].lower()}'](board) assert ret.returncode == 0, 'Failed to reset device' - data = ser.read(1000) + data = ser.read(10000) ser.close() if len(data) == 0: assert False, 'No data from device' - lines = data.decode('utf-8').splitlines() + lines = data.decode('utf-8', errors='ignore').splitlines() enum_dev_sn = [] for l in lines: vid_pid_sn = re.search(r'ID ([0-9a-fA-F]+):([0-9a-fA-F]+) SN (\w+)', l) @@ -422,7 +419,7 @@ def test_device_dfu(board): # Wait device enum timeout = ENUM_TIMEOUT - while timeout: + while timeout > 0: ret = run_cmd(f'dfu-util -l') stdout = ret.stdout.decode() if f'serial="{uid}"' in stdout and 'Found DFU: [cafe:4000]' in stdout: @@ -430,7 +427,7 @@ def test_device_dfu(board): time.sleep(1) timeout = timeout - 1 - assert timeout, 'Device not available' + assert timeout > 0, 'Device not available' f_dfu0 = f'dfu0_{uid}' f_dfu1 = f'dfu1_{uid}' @@ -463,7 +460,7 @@ def test_device_dfu_runtime(board): # Wait device enum timeout = ENUM_TIMEOUT - while timeout: + while timeout > 0: ret = run_cmd(f'dfu-util -l') stdout = ret.stdout.decode() if f'serial="{uid}"' in stdout and 'Found Runtime: [cafe:4000]' in stdout: @@ -471,7 +468,7 @@ def test_device_dfu_runtime(board): time.sleep(1) timeout = timeout - 1 - assert timeout, 'Device not available' + assert timeout > 0, 'Device not available' def test_device_hid_boot_interface(board): @@ -481,13 +478,13 @@ def test_device_hid_boot_interface(board): mouse2 = get_hid_dev(uid, 'TinyUSB', 'TinyUSB_Device', 'if01-mouse') # Wait device enum timeout = ENUM_TIMEOUT - while timeout: + while timeout > 0: if os.path.exists(kbd) and os.path.exists(mouse1) and os.path.exists(mouse2): break time.sleep(1) timeout = timeout - 1 - assert timeout, 'HID device not available' + assert timeout > 0, 'HID device not available' def test_device_hid_composite_freertos(id): diff --git a/test/hil/tinyusb.json b/test/hil/tinyusb.json index fb4c05c3d..7436ddb63 100644 --- a/test/hil/tinyusb.json +++ b/test/hil/tinyusb.json @@ -163,9 +163,9 @@ "device": true, "host": false, "dual": false }, "flasher": { - "name": "stlink", + "name": "openocd", "uid": "004C00343137510F39383538", - "args": "" + "args": "-f interface/stlink.cfg -f target/stm32h7x.cfg" } }, { -- cgit v1.3.1 From 69dca9518c516c48ad013ea00c11bbf1746ada9a Mon Sep 17 00:00:00 2001 From: hathach Date: Wed, 26 Mar 2025 15:20:27 +0700 Subject: added mimxrt1064_evk to hil test pool --- examples/dual/host_info_to_device_cdc/src/main.c | 3 ++- test/hil/hil_test.py | 3 +++ test/hil/tinyusb.json | 13 +++++++++++++ 3 files changed, 18 insertions(+), 1 deletion(-) (limited to 'test/hil') diff --git a/examples/dual/host_info_to_device_cdc/src/main.c b/examples/dual/host_info_to_device_cdc/src/main.c index c1017141c..7e593f234 100644 --- a/examples/dual/host_info_to_device_cdc/src/main.c +++ b/examples/dual/host_info_to_device_cdc/src/main.c @@ -142,7 +142,7 @@ void cdc_task(void) { if (!tud_cdc_connected()) { // delay a bit otherwise we can outpace host's terminal. Linux will set LineState (DTR) then Line Coding. // If we send data before Linux's terminal set Line Coding, it can be ignored --> missing data with hardware test loop - board_delay(10); + board_delay(20); return; } @@ -151,6 +151,7 @@ void cdc_task(void) { if (is_print[daddr]) { is_print[daddr] = false; print_device_info(daddr, &descriptor_device[daddr]); + tud_cdc_write_flush(); } } } diff --git a/test/hil/hil_test.py b/test/hil/hil_test.py index 017c17018..662bb3a1f 100755 --- a/test/hil/hil_test.py +++ b/test/hil/hil_test.py @@ -561,6 +561,9 @@ def test_board(board): print('Skip (no binary)') continue + if verbose: + print(f'Flashing {fw_name}.elf') + # flash firmware. It may fail randomly, retry a few times max_rety = 2 for i in range(max_rety): diff --git a/test/hil/tinyusb.json b/test/hil/tinyusb.json index 7436ddb63..a9460bf9d 100644 --- a/test/hil/tinyusb.json +++ b/test/hil/tinyusb.json @@ -69,6 +69,19 @@ "args": "-device ATSAMD51J19" } }, + { + "name": "mimxrt1064_evk", + "uid": "BAE96FB95AFA6DBB8F00005002001200", + "tests": { + "device": true, "host": true, "dual": true, + "dev_attached": [{"vid_pid": "1a86_55d4", "serial": "52D2023299"}] + }, + "flasher": { + "name": "jlink", + "uid": "000725299165", + "args": "-device MIMXRT1064xxx6A" + } + }, { "name": "lpcxpresso11u37", "uid": "17121919", -- cgit v1.3.1 From 901ce2ad93b39c08e8e6b7e5b3f4dbd0b9df879e Mon Sep 17 00:00:00 2001 From: hathach Date: Wed, 26 Mar 2025 21:13:01 +0700 Subject: hcd/ehci: hcd_edpt_open() return false if ep is already opened. implement hcd_edpt_close() --- hw/bsp/imxrt/family.c | 4 +- src/device/usbd.c | 9 +- src/host/usbh.c | 2 +- src/portable/ehci/ehci.c | 259 ++++++++++++++++++++------------------ src/portable/ehci/ehci.h | 314 +++++++++++++++++++++++------------------------ test/hil/hil_test.py | 3 +- 6 files changed, 301 insertions(+), 290 deletions(-) (limited to 'test/hil') diff --git a/hw/bsp/imxrt/family.c b/hw/bsp/imxrt/family.c index 7b89cc76d..7e4734a66 100644 --- a/hw/bsp/imxrt/family.c +++ b/hw/bsp/imxrt/family.c @@ -61,7 +61,7 @@ - Define CFG_TUSB_MEM_SECTION=__attribute__((section("NonCacheable"))) */ -static void BOARD_ConfigMPU(void); +// static void BOARD_ConfigMPU(void); // needed by fsl_flexspi_nor_boot TU_ATTR_USED const uint8_t dcd_data[] = {0x00}; @@ -456,7 +456,7 @@ static void BOARD_ConfigMPU(void) { #elif __CORTEX_M == 4 -void BOARD_ConfigMPU(void) { +static void BOARD_ConfigMPU(void) { #if defined(__CC_ARM) || defined(__ARMCC_VERSION) extern uint32_t Image$$RW_m_ncache$$Base[]; /* RW_m_ncache_unused is a auxiliary region which is used to get the whole size of noncache section */ diff --git a/src/device/usbd.c b/src/device/usbd.c index fb5cec49d..9c381d5e0 100644 --- a/src/device/usbd.c +++ b/src/device/usbd.c @@ -561,8 +561,7 @@ static void usbd_reset(uint8_t rhport) { } bool tud_task_event_ready(void) { - // Skip if stack is not initialized - if (!tud_inited()) return false; + TU_VERIFY(tud_inited()); // Skip if stack is not initialized return !osal_queue_empty(_usbd_q); } @@ -684,7 +683,9 @@ void tud_task_ext(uint32_t timeout_ms, bool in_isr) { case USBD_EVENT_FUNC_CALL: TU_LOG_USBD("\r\n"); - if (event.func_call.func) event.func_call.func(event.func_call.param); + if (event.func_call.func) { + event.func_call.func(event.func_call.param); + } break; case DCD_EVENT_SOF: @@ -701,7 +702,7 @@ void tud_task_ext(uint32_t timeout_ms, bool in_isr) { #if CFG_TUSB_OS != OPT_OS_NONE && CFG_TUSB_OS != OPT_OS_PICO // return if there is no more events, for application to run other background - if (osal_queue_empty(_usbd_q)) return; + if (osal_queue_empty(_usbd_q)) { return; } #endif } } diff --git a/src/host/usbh.c b/src/host/usbh.c index 5925a7be0..e60db53da 100644 --- a/src/host/usbh.c +++ b/src/host/usbh.c @@ -520,7 +520,7 @@ void tuh_task_ext(uint32_t timeout_ms, bool in_isr) { // Loop until there is no more events in the queue while (1) { hcd_event_t event; - if (!osal_queue_receive(_usbh_q, &event, timeout_ms)) return; + if (!osal_queue_receive(_usbh_q, &event, timeout_ms)) { return; } switch (event.event_id) { case HCD_EVENT_DEVICE_ATTACH: diff --git a/src/portable/ehci/ehci.c b/src/portable/ehci/ehci.c index 01bbf62bf..292a352fb 100644 --- a/src/portable/ehci/ehci.c +++ b/src/portable/ehci/ehci.c @@ -62,8 +62,7 @@ #define QHD_MAX (CFG_TUH_DEVICE_MAX*CFG_TUH_ENDPOINT_MAX + CFG_TUH_HUB) #define QTD_MAX QHD_MAX -typedef struct -{ +typedef struct { ehci_link_t period_framelist[FRAMELIST_SIZE]; // TODO only implement 1 ms & 2 ms & 4 ms, 8 ms (framelist) @@ -139,6 +138,12 @@ static ehci_qhd_t* qhd_get_from_addr (uint8_t dev_addr, uint8_t ep_addr); static void qhd_init(ehci_qhd_t *p_qhd, uint8_t dev_addr, tusb_desc_endpoint_t const * ep_desc); static void qhd_attach_qtd(ehci_qhd_t *qhd, ehci_qtd_t *qtd); static void qhd_remove_qtd(ehci_qhd_t *qhd); +TU_ATTR_ALWAYS_INLINE static inline bool qhd_is_periodic(ehci_qhd_t const *qhd) { + return qhd->int_smask != 0; +} +TU_ATTR_ALWAYS_INLINE static inline uint8_t qhd_ep_addr(ehci_qhd_t const *qhd) { + return tu_edpt_addr(qhd->ep_number, qhd->pid); +} TU_ATTR_ALWAYS_INLINE static inline ehci_qtd_t* qtd_control(uint8_t dev_addr); TU_ATTR_ALWAYS_INLINE static inline ehci_qtd_t* qtd_find_free (void); @@ -146,9 +151,10 @@ static void qtd_init (ehci_qtd_t* qtd, void const* buffer, uint16_t total_bytes) TU_ATTR_ALWAYS_INLINE static inline ehci_link_t* list_get_period_head(uint8_t rhport, uint32_t interval_ms); TU_ATTR_ALWAYS_INLINE static inline ehci_qhd_t* list_get_async_head(uint8_t rhport); -TU_ATTR_ALWAYS_INLINE static inline void list_insert (ehci_link_t *current, ehci_link_t *new, uint8_t new_type); TU_ATTR_ALWAYS_INLINE static inline ehci_link_t* list_next (ehci_link_t const *p_link); -static void list_remove_qhd_by_daddr(ehci_link_t* list_head, uint8_t dev_addr); +TU_ATTR_ALWAYS_INLINE static inline void list_insert (ehci_link_t *current, ehci_link_t *entry, uint8_t type); +TU_ATTR_ALWAYS_INLINE static inline void list_remove(ehci_link_t* head, ehci_link_t* prev, ehci_qhd_t* qhd); +static void list_remove_qhd_by_addr(ehci_link_t *list_head, uint8_t dev_addr, uint8_t ep_addr); static void ehci_disable_schedule(ehci_registers_t* regs, bool is_period) { // maybe have a timeout for status @@ -175,15 +181,12 @@ static void ehci_enable_schedule(ehci_registers_t* regs, bool is_period) { //--------------------------------------------------------------------+ // HCD API //--------------------------------------------------------------------+ - -uint32_t hcd_frame_number(uint8_t rhport) -{ +uint32_t hcd_frame_number(uint8_t rhport) { (void) rhport; return (ehci_data.uframe_number + ehci_data.regs->frame_index) >> 3; } -void hcd_port_reset(uint8_t rhport) -{ +void hcd_port_reset(uint8_t rhport) { (void) rhport; ehci_registers_t* regs = ehci_data.regs; @@ -204,8 +207,7 @@ void hcd_port_reset(uint8_t rhport) regs->portsc = portsc; } -void hcd_port_reset_end(uint8_t rhport) -{ +void hcd_port_reset_end(uint8_t rhport) { (void) rhport; ehci_registers_t* regs = ehci_data.regs; @@ -221,32 +223,29 @@ void hcd_port_reset_end(uint8_t rhport) regs->portsc = portsc; } -bool hcd_port_connect_status(uint8_t rhport) -{ +bool hcd_port_connect_status(uint8_t rhport) { (void) rhport; return ehci_data.regs->portsc_bm.current_connect_status; } -tusb_speed_t hcd_port_speed_get(uint8_t rhport) -{ +tusb_speed_t hcd_port_speed_get(uint8_t rhport) { (void) rhport; return (tusb_speed_t) ehci_data.regs->portsc_bm.nxp_port_speed; // NXP specific port speed } // Close all opened endpoint belong to this device -void hcd_device_close(uint8_t rhport, uint8_t daddr) -{ +void hcd_device_close(uint8_t rhport, uint8_t daddr) { // skip dev0 if (daddr == 0) { return; } - // Remove from async list - list_remove_qhd_by_daddr((ehci_link_t *) list_get_async_head(rhport), daddr); + // Remove from async list all endpoints of this device + list_remove_qhd_by_addr((ehci_link_t *) list_get_async_head(rhport), daddr, TUSB_INDEX_INVALID_8); - // Remove from all interval period list - for(uint8_t i = 0; i < TU_ARRAY_SIZE(ehci_data.period_head_arr); i++) { - list_remove_qhd_by_daddr((ehci_link_t *) &ehci_data.period_head_arr[i], daddr); + // Remove from all interval period list of this device + for (uint8_t i = 0; i < TU_ARRAY_SIZE(ehci_data.period_head_arr); i++) { + list_remove_qhd_by_addr((ehci_link_t *) &ehci_data.period_head_arr[i], daddr, TUSB_INDEX_INVALID_8); } // Async doorbell (EHCI 4.8.2 for operational details) @@ -358,12 +357,10 @@ bool ehci_init(uint8_t rhport, uint32_t capability_reg, uint32_t operatial_reg) } #if 0 -static void ehci_stop(uint8_t rhport) -{ +static void ehci_stop(uint8_t rhport) { (void) rhport; ehci_registers_t* regs = ehci_data.regs; - regs->command_bm.run_stop = 0; // USB Spec: controller has to stop within 16 uframe = 2 frames @@ -375,41 +372,44 @@ static void ehci_stop(uint8_t rhport) // Endpoint API //--------------------------------------------------------------------+ -bool hcd_edpt_open(uint8_t rhport, uint8_t dev_addr, tusb_desc_endpoint_t const * ep_desc) -{ - (void) rhport; - +bool hcd_edpt_open(uint8_t rhport, uint8_t dev_addr, tusb_desc_endpoint_t const * ep_desc) { // TODO not support ISO yet TU_ASSERT (ep_desc->bmAttributes.xfer != TUSB_XFER_ISOCHRONOUS); //------------- Prepare Queue Head -------------// - ehci_qhd_t *p_qhd = (ep_desc->bEndpointAddress == 0) ? qhd_control(dev_addr) : qhd_find_free(); + ehci_qhd_t *p_qhd; + if (ep_desc->bEndpointAddress == 0) { + p_qhd = qhd_control(dev_addr); + } else { + TU_VERIFY(NULL == qhd_get_from_addr(dev_addr, ep_desc->bEndpointAddress)); // ep not opened yet + p_qhd = qhd_find_free(); + } TU_ASSERT(p_qhd); - qhd_init(p_qhd, dev_addr, ep_desc); - // control of dev0 is always present as async head - if ( dev_addr == 0 ) return true; + // control of dev0 always exists as async head + if (dev_addr == 0) { + return true; + } // Insert to list ehci_link_t * list_head = NULL; - - switch (ep_desc->bmAttributes.xfer) - { + switch (ep_desc->bmAttributes.xfer) { case TUSB_XFER_CONTROL: case TUSB_XFER_BULK: - list_head = (ehci_link_t*) list_get_async_head(rhport); - break; + list_head = (ehci_link_t *) list_get_async_head(rhport); + break; case TUSB_XFER_INTERRUPT: list_head = list_get_period_head(rhport, p_qhd->interval_ms); - break; + break; case TUSB_XFER_ISOCHRONOUS: // TODO iso is not supported - break; + break; - default: break; + default: + break; } TU_ASSERT(list_head); @@ -421,8 +421,23 @@ bool hcd_edpt_open(uint8_t rhport, uint8_t dev_addr, tusb_desc_endpoint_t const return true; } -bool hcd_setup_send(uint8_t rhport, uint8_t dev_addr, uint8_t const setup_packet[8]) -{ +bool hcd_edpt_close(uint8_t rhport, uint8_t daddr, uint8_t ep_addr) { + ehci_qhd_t* qhd = qhd_get_from_addr(daddr, ep_addr); + TU_VERIFY(qhd != NULL); + + ehci_link_t * list_head; + if (qhd_is_periodic(qhd)) { + // interrupt endpoint + list_head = list_get_period_head(rhport, qhd->interval_ms);; + } else { + list_head = (ehci_link_t *) list_get_async_head(rhport); + } + + list_remove_qhd_by_addr(list_head, daddr, ep_addr); + return true; +} + +bool hcd_setup_send(uint8_t rhport, uint8_t dev_addr, uint8_t const setup_packet[8]) { (void) rhport; ehci_qhd_t* qhd = &ehci_data.control[dev_addr].qhd; @@ -444,14 +459,14 @@ bool hcd_setup_send(uint8_t rhport, uint8_t dev_addr, uint8_t const setup_packet return true; } -bool hcd_edpt_xfer(uint8_t rhport, uint8_t dev_addr, uint8_t ep_addr, uint8_t * buffer, uint16_t buflen) -{ +bool hcd_edpt_xfer(uint8_t rhport, uint8_t dev_addr, uint8_t ep_addr, uint8_t * buffer, uint16_t buflen) { (void) rhport; uint8_t const epnum = tu_edpt_number(ep_addr); uint8_t const dir = tu_edpt_dir(ep_addr); ehci_qhd_t* qhd = qhd_get_from_addr(dev_addr, ep_addr); + TU_VERIFY(qhd != NULL); ehci_qtd_t* qtd; if (epnum == 0) { @@ -540,8 +555,7 @@ bool hcd_edpt_clear_stall(uint8_t rhport, uint8_t daddr, uint8_t ep_addr) { // This isr mean it is safe to modify previously removed queue head from async list. // In tinyusb, queue head is only removed when device is unplugged. TU_ATTR_ALWAYS_INLINE static inline -void async_advance_isr(uint8_t rhport) -{ +void async_advance_isr(uint8_t rhport) { (void) rhport; ehci_qhd_t *qhd_pool = ehci_data.qhd_pool; @@ -612,8 +626,7 @@ void qhd_xfer_complete_isr(ehci_qhd_t * qhd) { } TU_ATTR_ALWAYS_INLINE static inline -void proccess_async_xfer_isr(ehci_qhd_t * const list_head) -{ +void proccess_async_xfer_isr(ehci_qhd_t * const list_head) { ehci_qhd_t *qhd = list_head; do { @@ -623,8 +636,7 @@ void proccess_async_xfer_isr(ehci_qhd_t * const list_head) } TU_ATTR_ALWAYS_INLINE static inline -void process_period_xfer_isr(uint8_t rhport, uint32_t interval_ms) -{ +void process_period_xfer_isr(uint8_t rhport, uint32_t interval_ms) { uint32_t const period_1ms_addr = (uint32_t) list_get_period_head(rhport, 1u); ehci_link_t next_link = *list_get_period_head(rhport, interval_ms); @@ -726,51 +738,55 @@ TU_ATTR_ALWAYS_INLINE static inline ehci_link_t* list_next(ehci_link_t const *p_ return (ehci_link_t*) tu_align32(p_link->address); } -TU_ATTR_ALWAYS_INLINE static inline void list_insert(ehci_link_t *current, ehci_link_t *new, uint8_t new_type) -{ - new->address = current->address; - current->address = ((uint32_t) new) | (new_type << 1); +TU_ATTR_ALWAYS_INLINE static inline void list_insert(ehci_link_t *current, ehci_link_t *entry, uint8_t type) { + entry->address = current->address; + current->address = ((uint32_t) entry) | (type << 1); +} + +// Remove a queue head from the list. +// Per EHCI 4.8.2 the removed qhd's next is linked to list head (which always reachable by Host Controller) +// TODO support iTD/siTD +TU_ATTR_ALWAYS_INLINE static inline void list_remove(ehci_link_t* head, ehci_link_t* prev, ehci_qhd_t* qhd) { + // TODO deactivate all TD, wait for QHD to inactive before removal + prev->address = qhd->next.address; + + // link the removed qhd's next to list head + qhd->next.address = ((uint32_t) head) | (EHCI_QTYPE_QHD << 1); + + if (qhd_is_periodic(qhd)) { + // period list queue element is guarantee to be free in the next frame (1 ms) + qhd->used = 0; + } else { + // async list use async advance handshake. Mark as removing, will completely re-usable when async advance isr occurs + qhd->removing = 1; + } + + hcd_dcache_clean(qhd, sizeof(ehci_qhd_t)); + hcd_dcache_clean(prev, sizeof(ehci_qhd_t)); } -// Remove all queue head belong to this device address -static void list_remove_qhd_by_daddr(ehci_link_t* list_head, uint8_t dev_addr) { - ehci_link_t* prev = list_head; +// Remove queue head belong to this device address +static void list_remove_qhd_by_addr(ehci_link_t *list_head, uint8_t dev_addr, uint8_t ep_addr) { + ehci_link_t *prev = list_head; while (prev && !prev->terminate) { - ehci_qhd_t* qhd = (ehci_qhd_t*) (uintptr_t) list_next(prev); + ehci_qhd_t *qhd = (ehci_qhd_t *) (uintptr_t) list_next(prev); // done if loop back to head - if ( (uintptr_t) qhd == (uintptr_t) list_head) { + if ((uintptr_t) qhd == (uintptr_t) list_head) { break; } - if ( qhd->dev_addr == dev_addr ) { - // TODO deactivate all TD, wait for QHD to inactive before removal - prev->address = qhd->next.address; - - // EHCI 4.8.2 link the removed qhd's next to async head (which always reachable by Host Controller) - qhd->next.address = ((uint32_t) list_head) | (EHCI_QTYPE_QHD << 1); - - if ( qhd->int_smask ) - { - // period list queue element is guarantee to be free in the next frame (1 ms) - qhd->used = 0; - }else - { - // async list use async advance handshake - // mark as removing, will completely re-usable when async advance isr occurs - qhd->removing = 1; - } - - hcd_dcache_clean(qhd, sizeof(ehci_qhd_t)); - hcd_dcache_clean(prev, sizeof(ehci_qhd_t)); - }else { + // ep_addr is 0xff means all endpoints of this device address + if (qhd->dev_addr == dev_addr && + (ep_addr == TUSB_INDEX_INVALID_8 || qhd_ep_addr(qhd) == ep_addr)) { + list_remove(list_head, prev, qhd); + } else { prev = list_next(prev); } } } - //--------------------------------------------------------------------+ // Queue Header helper //--------------------------------------------------------------------+ @@ -782,8 +798,10 @@ TU_ATTR_ALWAYS_INLINE static inline ehci_qhd_t* qhd_control(uint8_t dev_addr) { // Find a free queue head TU_ATTR_ALWAYS_INLINE static inline ehci_qhd_t *qhd_find_free(void) { - for ( uint32_t i = 0; i < QHD_MAX; i++ ) { - if ( !ehci_data.qhd_pool[i].used ) return &ehci_data.qhd_pool[i]; + for (uint32_t i = 0; i < QHD_MAX; i++) { + if (!ehci_data.qhd_pool[i].used) { + return &ehci_data.qhd_pool[i]; + } } return NULL; } @@ -800,10 +818,9 @@ static ehci_qhd_t *qhd_get_from_addr(uint8_t dev_addr, uint8_t ep_addr) { } ehci_qhd_t *qhd_pool = ehci_data.qhd_pool; - - for ( uint32_t i = 0; i < QHD_MAX; i++ ) { - if ( (qhd_pool[i].dev_addr == dev_addr) && - ep_addr == tu_edpt_addr(qhd_pool[i].ep_number, qhd_pool[i].pid) ) { + for (uint32_t i = 0; i < QHD_MAX; i++) { + if ((qhd_pool[i].dev_addr == dev_addr) && + ep_addr == qhd_ep_addr(&qhd_pool[i])) { return &qhd_pool[i]; } } @@ -812,8 +829,7 @@ static ehci_qhd_t *qhd_get_from_addr(uint8_t dev_addr, uint8_t ep_addr) { } // Init queue head with endpoint descriptor -static void qhd_init(ehci_qhd_t *p_qhd, uint8_t dev_addr, tusb_desc_endpoint_t const * ep_desc) -{ +static void qhd_init(ehci_qhd_t *p_qhd, uint8_t dev_addr, tusb_desc_endpoint_t const * ep_desc) { // address 0 is used as async head, which always on the list --> cannot be cleared (ehci halted otherwise) if (dev_addr != 0) { tu_memclr(p_qhd, sizeof(ehci_qhd_t)); @@ -830,39 +846,43 @@ static void qhd_init(ehci_qhd_t *p_qhd, uint8_t dev_addr, tusb_desc_endpoint_t c p_qhd->ep_number = tu_edpt_number(ep_desc->bEndpointAddress); p_qhd->ep_speed = devtree_info.speed; p_qhd->data_toggle_control= (xfer_type == TUSB_XFER_CONTROL) ? 1 : 0; - p_qhd->head_list_flag = (dev_addr == 0) ? 1 : 0; // addr0's endpoint is the static asyn list head + p_qhd->head_list_flag = (dev_addr == 0) ? 1 : 0; // addr0's endpoint is the static async list head p_qhd->max_packet_size = tu_edpt_packet_size(ep_desc); p_qhd->fl_ctrl_ep_flag = ((xfer_type == TUSB_XFER_CONTROL) && (p_qhd->ep_speed != TUSB_SPEED_HIGH)) ? 1 : 0; p_qhd->nak_reload = 0; - // Bulk/Control -> smask = cmask = 0 - // TODO Isochronous - if (TUSB_XFER_INTERRUPT == xfer_type) - { - if (TUSB_SPEED_HIGH == p_qhd->ep_speed) - { - TU_ASSERT( interval <= 16, ); - if ( interval < 4) // sub millisecond interval - { - p_qhd->interval_ms = 0; - p_qhd->int_smask = (interval == 1) ? TU_BIN8(11111111) : - (interval == 2) ? TU_BIN8(10101010) : TU_BIN8(01000100); - }else - { - p_qhd->interval_ms = (uint8_t) tu_min16( 1 << (interval-4), 255 ); - p_qhd->int_smask = TU_BIT(interval % 8); + switch (xfer_type) { + case TUSB_XFER_CONTROL: + case TUSB_XFER_BULK: + p_qhd->int_smask = p_qhd->fl_int_cmask = 0; + break; + + case TUSB_XFER_INTERRUPT: + if (TUSB_SPEED_HIGH == p_qhd->ep_speed) { + TU_ASSERT(interval <= 16, ); + if (interval < 4) { + // sub millisecond interval + p_qhd->interval_ms = 0; + p_qhd->int_smask = (interval == 1) ? TU_BIN8(11111111) : + (interval == 2) ? TU_BIN8(10101010): TU_BIN8(01000100); + } else { + p_qhd->interval_ms = (uint8_t) tu_min16(1 << (interval - 4), 255); + p_qhd->int_smask = TU_BIT(interval % 8); + } + } else { + TU_ASSERT(0 != interval, ); + // Full/Low: 4.12.2.1 (EHCI) case 1 schedule start split at 1 us & complete split at 2,3,4 uframes + p_qhd->int_smask = 0x01; + p_qhd->fl_int_cmask = TU_BIN8(11100); + p_qhd->interval_ms = interval; } - }else - { - TU_ASSERT( 0 != interval, ); - // Full/Low: 4.12.2.1 (EHCI) case 1 schedule start split at 1 us & complete split at 2,3,4 uframes - p_qhd->int_smask = 0x01; - p_qhd->fl_int_cmask = TU_BIN8(11100); - p_qhd->interval_ms = interval; - } - }else - { - p_qhd->int_smask = p_qhd->fl_int_cmask = 0; + break; + + case TUSB_XFER_ISOCHRONOUS: + // TODO not support ISO yet + break; + + default: break; } p_qhd->fl_hub_addr = devtree_info.hub_addr; @@ -880,8 +900,7 @@ static void qhd_init(ehci_qhd_t *p_qhd, uint8_t dev_addr, tusb_desc_endpoint_t c p_qhd->qtd_overlay.next.terminate = 1; p_qhd->qtd_overlay.alternate.terminate = 1; - if (TUSB_XFER_BULK == xfer_type && p_qhd->ep_speed == TUSB_SPEED_HIGH && p_qhd->pid == EHCI_PID_OUT) - { + if (TUSB_XFER_BULK == xfer_type && p_qhd->ep_speed == TUSB_SPEED_HIGH && p_qhd->pid == EHCI_PID_OUT) { p_qhd->qtd_overlay.ping_err = 1; // do PING for Highspeed Bulk OUT, EHCI section 4.11 } } diff --git a/src/portable/ehci/ehci.h b/src/portable/ehci/ehci.h index 457adc1d3..87659701b 100644 --- a/src/portable/ehci/ehci.h +++ b/src/portable/ehci/ehci.h @@ -49,15 +49,14 @@ // TODO merge OHCI with EHCI enum { - EHCI_MAX_ITD = 4, + EHCI_MAX_ITD = 4, EHCI_MAX_SITD = 16 }; //--------------------------------------------------------------------+ // EHCI Data Structure //--------------------------------------------------------------------+ -enum -{ +enum { EHCI_QTYPE_ITD = 0 , EHCI_QTYPE_QHD , EHCI_QTYPE_SITD , @@ -65,8 +64,7 @@ enum }; /// EHCI PID -enum -{ +enum { EHCI_PID_OUT = 0 , EHCI_PID_IN , EHCI_PID_SETUP @@ -74,187 +72,182 @@ enum /// Link pointer typedef union { - uint32_t address; - struct { - uint32_t terminate : 1; - uint32_t type : 2; - }; -}ehci_link_t; + uint32_t address; + struct { + uint32_t terminate : 1; + uint32_t type : 2; + }; +} ehci_link_t; TU_VERIFY_STATIC( sizeof(ehci_link_t) == 4, "size is not correct" ); /// Queue Element Transfer Descriptor /// Qtd is used to declare overlay in ehci_qhd_t -> cannot be declared with TU_ATTR_ALIGNED(32) -typedef struct -{ - // Word 0: Next QTD Pointer - ehci_link_t next; - - // Word 1: Alternate Next QTD Pointer (not used) - union{ - ehci_link_t alternate; - struct { - uint32_t : 5; - uint32_t used : 1; - uint32_t : 10; - uint32_t expected_bytes : 16; - }; - }; - - // Word 2: qTQ Token - volatile uint32_t ping_err : 1 ; ///< For Highspeed: 0 Out, 1 Ping. Full/Slow used as error indicator - volatile uint32_t non_hs_split_state : 1 ; ///< Used by HC to track the state of split transaction - volatile uint32_t non_hs_missed_uframe : 1 ; ///< HC misses a complete split transaction - volatile uint32_t xact_err : 1 ; ///< Error (Timeout, CRC, Bad PID ... ) - volatile uint32_t babble_err : 1 ; ///< Babble detected, also set Halted bit to 1 - volatile uint32_t buffer_err : 1 ; ///< Data overrun/underrun error - volatile uint32_t halted : 1 ; ///< Serious error or STALL received - volatile uint32_t active : 1 ; ///< Start transfer, clear by HC when complete - - uint32_t pid : 2 ; ///< 0: OUT, 1: IN, 2 Setup - volatile uint32_t err_count : 2 ; ///< Error Counter of consecutive errors - volatile uint32_t current_page : 3 ; ///< Index into the qTD buffer pointer list - uint32_t int_on_complete : 1 ; ///< Interrupt on complete - volatile uint32_t total_bytes : 15 ; ///< Transfer bytes, decreased during transaction - volatile uint32_t data_toggle : 1 ; ///< Data Toggle bit - - - /// Buffer Page Pointer List, Each element in the list is a 4K page aligned, physical memory address. The lower 12 bits in each pointer are reserved (except for the first one) as each memory pointer must reference the start of a 4K page - uint32_t buffer[5]; +typedef struct { + // Word 0 Next QTD Pointer + ehci_link_t next; + + // Word 1 Alternate Next QTD Pointer (not used) + union { + ehci_link_t alternate; + struct { + uint32_t : 5; + uint32_t used : 1; + uint32_t : 10; + uint32_t expected_bytes : 16; + }; + }; + + // Word 2 qTQ Token + volatile uint32_t ping_err : 1; // For Highspeed: 0 Out, 1 Ping. Full/Slow used as error indicator + volatile uint32_t non_hs_split_state : 1; // Used by HC to track the state of split transaction + volatile uint32_t non_hs_missed_uframe : 1; // HC misses a complete split transaction + volatile uint32_t xact_err : 1; // Error (Timeout, CRC, Bad PID ... ) + volatile uint32_t babble_err : 1; // Babble detected, also set Halted bit to 1 + volatile uint32_t buffer_err : 1; // Data overrun/underrun error + volatile uint32_t halted : 1; // Serious error or STALL received + volatile uint32_t active : 1; // Start transfer, clear by HC when complete + + uint32_t pid : 2; // 0: OUT, 1: IN, 2 Setup + volatile uint32_t err_count : 2; // Error Counter of consecutive errors + volatile uint32_t current_page : 3; // Index into the qTD buffer pointer list + uint32_t int_on_complete : 1; // Interrupt on complete + volatile uint32_t total_bytes : 15; // Transfer bytes, decreased during transaction + volatile uint32_t data_toggle : 1; // Data Toggle bit + + // Buffer Page Pointer List, Each element in the list is a 4K page aligned, physical memory address. + // The lower 12 bits in each pointer are reserved (except for the first one) as each memory pointer must reference the start of a 4K page + uint32_t buffer[5]; } ehci_qtd_t; TU_VERIFY_STATIC( sizeof(ehci_qtd_t) == 32, "size is not correct" ); /// Queue Head -typedef struct TU_ATTR_ALIGNED(32) -{ - // Word 0: Next QHD - ehci_link_t next; - - // Word 1: Endpoint Characteristics - uint32_t dev_addr : 7 ; ///< device address - uint32_t fl_inactive_next_xact : 1 ; ///< Only valid for Periodic with Full/Slow speed - uint32_t ep_number : 4 ; ///< EP number - uint32_t ep_speed : 2 ; ///< 0: Full, 1: Low, 2: High - uint32_t data_toggle_control : 1 ; ///< 0: use DT in qHD, 1: use DT in qTD - uint32_t head_list_flag : 1 ; ///< Head of the queue - uint32_t max_packet_size : 11 ; ///< Max packet size - uint32_t fl_ctrl_ep_flag : 1 ; ///< 1 if is Full/Low speed control endpoint - uint32_t nak_reload : 4 ; ///< Used by HC - - // Word 2: Endpoint Capabilities - uint32_t int_smask : 8 ; ///< Interrupt Schedule Mask - uint32_t fl_int_cmask : 8 ; ///< Split Completion Mask for Full/Slow speed - uint32_t fl_hub_addr : 7 ; ///< Hub Address for Full/Slow speed - uint32_t fl_hub_port : 7 ; ///< Hub Port for Full/Slow speed - uint32_t mult : 2 ; ///< Transaction per micro frame - - // Word 3: Current qTD Pointer - volatile uint32_t qtd_addr; - - // Word 4-11: Transfer Overlay - volatile ehci_qtd_t qtd_overlay; - - //--------------------------------------------------------------------+ +typedef struct TU_ATTR_ALIGNED(32) { + // Word 0 Next QHD + ehci_link_t next; + + // Word 1 Endpoint Characteristics + uint32_t dev_addr : 7; // device address + uint32_t fl_inactive_next_xact : 1; // Only valid for Periodic with Full/Slow speed + uint32_t ep_number : 4; // EP number + uint32_t ep_speed : 2; // Full (0), Low (1), High (2) + uint32_t data_toggle_control : 1; // 0 use DT in qHD, 1 use DT in qTD + uint32_t head_list_flag : 1; // Head of the queue + uint32_t max_packet_size : 11; // Max packet size + uint32_t fl_ctrl_ep_flag : 1; // 1 if is Full/Low speed control endpoint + uint32_t nak_reload : 4; // Used by HC + + // Word 2 Endpoint Capabilities + uint32_t int_smask : 8; // Interrupt Schedule Mask + uint32_t fl_int_cmask : 8; // Split Completion Mask for Full/Slow speed + uint32_t fl_hub_addr : 7; // Hub Address for Full/Slow speed + uint32_t fl_hub_port : 7; // Hub Port for Full/Slow speed + uint32_t mult : 2; // Transaction per micro frame + + // Word 3 Current qTD Pointer + volatile uint32_t qtd_addr; + + // Word 4-11 Transfer Overlay + volatile ehci_qtd_t qtd_overlay; + + //--------------------------------------------------------------------+ /// Due to the fact QHD is 32 bytes aligned but occupies only 48 bytes - /// thus there are 16 bytes padding free that we can make use of. + /// thus there are 16 bytes padding free that we can make use of. //--------------------------------------------------------------------+ - uint8_t used; - uint8_t removing; // removed from asyn list, waiting for async advance - uint8_t pid; - uint8_t interval_ms; // polling interval in frames (or millisecond) + uint8_t used; + uint8_t removing;// removed from asyn list, waiting for async advance + uint8_t pid; + uint8_t interval_ms;// polling interval in frames (or millisecond) - uint8_t TU_RESERVED[4]; + uint8_t TU_RESERVED[4]; // Attached TD management, note usbh will only queue 1 TD per QHD. // buffer for dcache invalidate since td's buffer is modified by HC and finding initial buffer address is not trivial uint32_t attached_buffer; - ehci_qtd_t * volatile attached_qtd; + ehci_qtd_t *volatile attached_qtd; } ehci_qhd_t; - TU_VERIFY_STATIC( sizeof(ehci_qhd_t) == 64, "size is not correct" ); /// Highspeed Isochronous Transfer Descriptor (section 3.3) typedef struct TU_ATTR_ALIGNED(32) { - // Word 0: Next Link Pointer - ehci_link_t next; - - // Word 1-8: iTD Transaction Status and Control List - struct { - // iTD Control - volatile uint32_t offset : 12 ; ///< This field is a value that is an offset, expressed in bytes, from the beginning of a buffer. - volatile uint32_t page_select : 3 ; ///< These bits are set by software to indicate which of the buffer page pointers the offset field in this slot should be concatenated to produce the starting memory address for this transaction. The valid range of values for this field is 0 to 6 - uint32_t int_on_complete : 1 ; ///< If this bit is set to a one, it specifies that when this transaction completes, the Host Controller should issue an interrupt at the next interrupt threshold - volatile uint32_t length : 12 ; ///< For an OUT, this field is the number of data bytes the host controller will send during the transaction. The host controller is not required to update this field to reflect the actual number of bytes transferred during the transfer - ///< For an IN, the initial value of the field is the number of bytes the host expects the endpoint to deliver. During the status update, the host controller writes back the number of bytes successfully received. The value in this register is the actual byte count - // iTD Status - volatile uint32_t error : 1 ; ///< Set to a one by the Host Controller during status update in the case where the host did not receive a valid response from the device (Timeout, CRC, Bad PID, etc.). This bit may only be set for isochronous IN transactions. - volatile uint32_t babble_err : 1 ; ///< Set to a 1 by the Host Controller during status update when a babble is detected during the transaction - volatile uint32_t buffer_err : 1 ; ///< Set to a 1 by the Host Controller during status update to indicate that the Host Controller is unable to keep up with the reception of incoming data (overrun) or is unable to supply data fast enough during transmission (underrun). - volatile uint32_t active : 1 ; ///< Set to 1 by software to enable the execution of an isochronous transaction by the Host Controller - } xact[8]; - - // Word 9-15 Buffer Page Pointer List (Plus) - uint32_t BufferPointer[7]; - -// // FIXME: Store meta data into buffer pointer reserved for saving memory -// /*---------- HCD Area ----------*/ -// uint32_t used; -// uint32_t IhdIdx; -// uint32_t reserved[6]; + // Word 0: Next Link Pointer + ehci_link_t next; + + // Word 1-8: iTD Transaction Status and Control List + struct { + // iTD Control + volatile uint32_t offset : 12; // offset in bytes, from the beginning of a buffer. + volatile uint32_t page_select : 3; // buffer page pointers the offset field in this slot should be concatenated to produce the starting memory address for this transaction. The valid range of values for this field is 0 to 6 + uint32_t int_on_complete : 1; // If this bit is set to a one, it specifies that when this transaction completes, the Host Controller should issue an interrupt at the next interrupt threshold + volatile uint32_t length : 12; // For an OUT, this field is the number of data bytes the host controller will send during the transaction. The host controller is not required to update this field to reflect the actual number of bytes transferred during the transfer + // For an IN, the initial value of the field is the number of bytes the host expects the endpoint to deliver. During the status update, the host controller writes back the number of bytes successfully received. The value in this register is the actual byte count + // iTD Status + volatile uint32_t error : 1; // Set to a one by the Host Controller during status update in the case where the host did not receive a valid response from the device (Timeout, CRC, Bad PID, etc.). This bit may only be set for isochronous IN transactions. + volatile uint32_t babble_err : 1; // Set to a 1 by the Host Controller during status update when a babble is detected during the transaction + volatile uint32_t buffer_err : 1; // Set to a 1 by the Host Controller during status update to indicate that the Host Controller is unable to keep up with the reception of incoming data (overrun) or is unable to supply data fast enough during transmission (underrun). + volatile uint32_t active : 1; // Set to 1 by software to enable the execution of an isochronous transaction by the Host Controller + } xact[8]; + + // Word 9-15 Buffer Page Pointer List (Plus) + uint32_t BufferPointer[7]; + + // FIXME: Store meta data into buffer pointer reserved for saving memory + //---------- HCD Area ---------- + // uint32_t used; + // uint32_t IhdIdx; + // uint32_t reserved[6]; } ehci_itd_t; - TU_VERIFY_STATIC( sizeof(ehci_itd_t) == 64, "size is not correct" ); /// Split (Full-Speed) Isochronous Transfer Descriptor -typedef struct TU_ATTR_ALIGNED(32) -{ +typedef struct TU_ATTR_ALIGNED(32) { // Word 0: Next Link Pointer - ehci_link_t next; - - // Word 1: siTD Endpoint Characteristics - uint32_t dev_addr : 7; ///< This field selects the specific device serving as the data source or sink. - uint32_t : 1; ///< reserved - uint32_t ep_number : 4; ///< This 4-bit field selects the particular endpoint number on the device serving as the data source or sink. - uint32_t : 4; ///< This field is reserved and should be set to zero. - uint32_t hub_addr : 7; ///< This field holds the device address of the transaction translators’ hub. - uint32_t : 1; ///< reserved - uint32_t port_number : 7; ///< This field is the port number of the recipient transaction translator. - uint32_t direction : 1; ///< 0 = OUT; 1 = IN. This field encodes whether the full-speed transaction should be an IN or OUT. - - // Word 2: Micro-frame Schedule Control - uint8_t int_smask ; ///< This field (along with the Activeand SplitX-statefields in the Statusbyte) are used to determine during which micro-frames the host controller should execute complete-split transactions - uint8_t fl_int_cmask; ///< This field (along with the Activeand SplitX-statefields in the Statusbyte) are used to determine during which micro-frames the host controller should execute start-split transactions. - uint16_t reserved ; ///< reserved - - // Word 3: siTD Transfer Status and Control - // Status [7:0] TODO identical to qTD Token'status --> refactor later - volatile uint32_t : 1 ; // reserved - volatile uint32_t split_state : 1 ; - volatile uint32_t missed_uframe : 1 ; - volatile uint32_t xact_err : 1 ; - volatile uint32_t babble_err : 1 ; - volatile uint32_t buffer_err : 1 ; - volatile uint32_t error : 1 ; - volatile uint32_t active : 1 ; - // Micro-frame Schedule Control - volatile uint32_t cmask_progress : 8 ; ///< This field is used by the host controller to record which split-completes have been executed. See Section 4.12.3.3.2 for behavioral requirements. - volatile uint32_t total_bytes : 10 ; ///< This field is initialized by software to the total number of bytes expected in this transfer. Maximum value is 1023 - volatile uint32_t : 4 ; ///< reserved - volatile uint32_t page_select : 1 ; ///< Used to indicate which data page pointer should be concatenated with the CurrentOffsetfield to construct a data buffer pointer - uint32_t int_on_complete : 1 ; ///< Do not interrupt when transaction is complete. 1 = Do interrupt when transaction is complete - uint32_t : 0 ; // padding to the end of current storage unit - - /// Word 4-5: Buffer Pointer List - uint32_t buffer[2]; // buffer[1] TP: Transaction Position - T-Count: Transaction Count - - /*---------- Word 6 ----------*/ - ehci_link_t back; - - /// SITD is 32-byte aligned but occupies only 28 --> 4 bytes for storing extra data - uint8_t used; - uint8_t ihd_idx; - uint8_t reserved2[2]; + ehci_link_t next; + + // Word 1: siTD Endpoint Characteristics + uint32_t dev_addr : 7; ///< This field selects the specific device serving as the data source or sink. + uint32_t : 1; ///< reserved + uint32_t ep_number : 4; ///< This 4-bit field selects the particular endpoint number on the device serving as the data source or sink. + uint32_t : 4; ///< This field is reserved and should be set to zero. + uint32_t hub_addr : 7; ///< This field holds the device address of the transaction translators’ hub. + uint32_t : 1; ///< reserved + uint32_t port_number : 7; ///< This field is the port number of the recipient transaction translator. + uint32_t direction : 1; ///< 0 = OUT; 1 = IN. This field encodes whether the full-speed transaction should be an IN or OUT. + + // Word 2: Micro-frame Schedule Control + uint8_t int_smask ; ///< This field (along with the Activeand SplitX-statefields in the Statusbyte) are used to determine during which micro-frames the host controller should execute complete-split transactions + uint8_t fl_int_cmask; ///< This field (along with the Activeand SplitX-statefields in the Statusbyte) are used to determine during which micro-frames the host controller should execute start-split transactions. + uint16_t reserved ; ///< reserved + + // Word 3: siTD Transfer Status and Control + // Status [7:0] TODO identical to qTD Token'status --> refactor later + volatile uint32_t : 1 ; // reserved + volatile uint32_t split_state : 1 ; + volatile uint32_t missed_uframe : 1 ; + volatile uint32_t xact_err : 1 ; + volatile uint32_t babble_err : 1 ; + volatile uint32_t buffer_err : 1 ; + volatile uint32_t error : 1 ; + volatile uint32_t active : 1 ; + // Micro-frame Schedule Control + volatile uint32_t cmask_progress : 8 ; ///< This field is used by the host controller to record which split-completes have been executed. See Section 4.12.3.3.2 for behavioral requirements. + volatile uint32_t total_bytes : 10 ; ///< This field is initialized by software to the total number of bytes expected in this transfer. Maximum value is 1023 + volatile uint32_t : 4 ; ///< reserved + volatile uint32_t page_select : 1 ; ///< Used to indicate which data page pointer should be concatenated with the CurrentOffsetfield to construct a data buffer pointer + uint32_t int_on_complete : 1 ; ///< Do not interrupt when transaction is complete. 1 = Do interrupt when transaction is complete + uint32_t : 0 ; // padding to the end of current storage unit + + /// Word 4-5: Buffer Pointer List + uint32_t buffer[2]; // buffer[1] TP: Transaction Position - T-Count: Transaction Count + + /*---------- Word 6 ----------*/ + ehci_link_t back; + + /// SITD is 32-byte aligned but occupies only 28 --> 4 bytes for storing extra data + uint8_t used; + uint8_t ihd_idx; + uint8_t reserved2[2]; } ehci_sitd_t; TU_VERIFY_STATIC( sizeof(ehci_sitd_t) == 32, "size is not correct" ); @@ -315,8 +308,7 @@ enum { EHCI_PORTSC_MASK_OVER_CURRENT_CHANGE }; -typedef volatile struct -{ +typedef volatile struct { union { uint32_t command; // 0x00 diff --git a/test/hil/hil_test.py b/test/hil/hil_test.py index 662bb3a1f..8b89de66c 100755 --- a/test/hil/hil_test.py +++ b/test/hil/hil_test.py @@ -340,8 +340,8 @@ def test_host_device_info(board): ser.close() if len(data) == 0: assert False, 'No data from device' - lines = data.decode('utf-8', errors='ignore').splitlines() + enum_dev_sn = [] for l in lines: vid_pid_sn = re.search(r'ID ([0-9a-fA-F]+):([0-9a-fA-F]+) SN (\w+)', l) @@ -353,7 +353,6 @@ def test_host_device_info(board): failed_msg = f'Expected {declared_devs}, Enumerated {enum_dev_sn}' print('\n'.join(lines)) assert False, failed_msg - return 0 -- cgit v1.3.1