From 310b8657f06570362740c4dda89705f694c81538 Mon Sep 17 00:00:00 2001 From: Ha Thach Date: Thu, 5 Dec 2024 18:01:16 +0700 Subject: try to run arm-iar with circleci with new token (#2890) * try to run arm-iar with circleci with new token * limit iar ci parallel build to 4 for medium+ and 6 for large * add hil-hfp to compile and test with IAR --- tools/build.py | 9 ++++++++- 1 file changed, 8 insertions(+), 1 deletion(-) (limited to 'tools') diff --git a/tools/build.py b/tools/build.py index 3a9239bc2..bbc98e9c4 100755 --- a/tools/build.py +++ b/tools/build.py @@ -109,7 +109,14 @@ def cmake_board(board, toolchain, build_flags_on): rcmd = run_cmd(f'cmake examples -B {build_dir} -G "Ninja" -DBOARD={board} -DCMAKE_BUILD_TYPE=MinSizeRel ' f'-DTOOLCHAIN={toolchain} {build_flags}') if rcmd.returncode == 0: - rcmd = run_cmd(f"cmake --build {build_dir}") + cmd = f"cmake --build {build_dir}" + # Due to IAR capability, limit parallel build to 4 (medium+) or 6 (large) docker + if toolchain == 'iar' and os.getenv('CIRCLECI'): + if 'large' in os.getenv('CIRCLE_JOB'): + cmd += ' --parallel 6' + else: + cmd += ' --parallel 4' + rcmd = run_cmd(cmd) ret[0 if rcmd.returncode == 0 else 1] += 1 example = 'all' -- cgit v1.3.1 From aa1bab769af601304eb62fcdc5241e7b94d4b935 Mon Sep 17 00:00:00 2001 From: hathach Date: Wed, 11 Dec 2024 16:41:11 +0700 Subject: limit parallel for circleci --- tools/build.py | 13 +++++++------ 1 file changed, 7 insertions(+), 6 deletions(-) (limited to 'tools') diff --git a/tools/build.py b/tools/build.py index bbc98e9c4..633d2b582 100755 --- a/tools/build.py +++ b/tools/build.py @@ -110,12 +110,13 @@ def cmake_board(board, toolchain, build_flags_on): f'-DTOOLCHAIN={toolchain} {build_flags}') if rcmd.returncode == 0: cmd = f"cmake --build {build_dir}" - # Due to IAR capability, limit parallel build to 4 (medium+) or 6 (large) docker - if toolchain == 'iar' and os.getenv('CIRCLECI'): - if 'large' in os.getenv('CIRCLE_JOB'): - cmd += ' --parallel 6' - else: - cmd += ' --parallel 4' + # circleci docker return $nproc as 36 core, limit parallel according to resource class. Required for IAR, also prevent crashed/killed by docker + if os.getenv('CIRCLECI'): + resource_class = { 'small': 1, 'medium': 2, 'medium+': 3, 'large': 4 } + for rc in resource_class: + if rc in os.getenv('CIRCLE_JOB'): + cmd += f' --parallel {resource_class[rc]}' + break rcmd = run_cmd(cmd) ret[0 if rcmd.returncode == 0 else 1] += 1 -- cgit v1.3.1 From 69dd473a4c7d745bc1b535024b3ed89d2c922dcd Mon Sep 17 00:00:00 2001 From: hathach Date: Thu, 12 Dec 2024 12:39:34 +0700 Subject: more migrate to ra smart configurator --- .idea/cmake.xml | 5 +- hw/bsp/ra/boards/ra6m1_ek/script/fsp.ld | 766 +++++++++++++++++++++ hw/bsp/ra/boards/ra6m1_ek/script/memory_regions.ld | 22 + .../ra6m1_ek/smart_configurator/configuration.xml | 299 ++++++++ .../ra_cfg/fsp_cfg/bsp/bsp_mcu_family_cfg.h | 235 +++---- hw/bsp/ra/boards/ra6m5_ek/script/fsp.ld | 766 +++++++++++++++++++++ hw/bsp/ra/boards/ra6m5_ek/script/memory_regions.ld | 22 + .../ra6m5_ek/smart_configurator/configuration.xml | 651 +++++++++++++++++ .../ra8m1_ek/smart_configurator/configuration.xml | 624 +++++++++++++++++ hw/bsp/ra/boards/uno_r4/board.cmake | 4 - .../ra/boards/uno_r4/ra_cfg/fsp_cfg/bsp/bsp_cfg.h | 89 ++- .../ra_cfg/fsp_cfg/bsp/bsp_mcu_device_pn_cfg.h | 12 +- .../uno_r4/ra_cfg/fsp_cfg/bsp/bsp_mcu_family_cfg.h | 145 ++-- hw/bsp/ra/boards/uno_r4/ra_gen/bsp_clock_cfg.h | 6 +- hw/bsp/ra/boards/uno_r4/script/fsp.ld | 766 +++++++++++++++++++++ hw/bsp/ra/boards/uno_r4/script/memory_regions.ld | 25 + .../uno_r4/smart_configurator/configuration.xml | 205 ++++++ hw/bsp/ra/boards/uno_r4/uno_r4.ld | 25 - hw/bsp/ra/family.cmake | 13 +- tools/get_deps.py | 9 +- 20 files changed, 4420 insertions(+), 269 deletions(-) create mode 100644 hw/bsp/ra/boards/ra6m1_ek/script/fsp.ld create mode 100644 hw/bsp/ra/boards/ra6m1_ek/script/memory_regions.ld create mode 100644 hw/bsp/ra/boards/ra6m1_ek/smart_configurator/configuration.xml create mode 100644 hw/bsp/ra/boards/ra6m5_ek/script/fsp.ld create mode 100644 hw/bsp/ra/boards/ra6m5_ek/script/memory_regions.ld create mode 100644 hw/bsp/ra/boards/ra6m5_ek/smart_configurator/configuration.xml create mode 100644 hw/bsp/ra/boards/ra8m1_ek/smart_configurator/configuration.xml create mode 100644 hw/bsp/ra/boards/uno_r4/script/fsp.ld create mode 100644 hw/bsp/ra/boards/uno_r4/script/memory_regions.ld create mode 100644 hw/bsp/ra/boards/uno_r4/smart_configurator/configuration.xml delete mode 100644 hw/bsp/ra/boards/uno_r4/uno_r4.ld (limited to 'tools') diff --git a/.idea/cmake.xml b/.idea/cmake.xml index 5af6d7722..6e58f040c 100644 --- a/.idea/cmake.xml +++ b/.idea/cmake.xml @@ -118,9 +118,10 @@ - - + + + diff --git a/hw/bsp/ra/boards/ra6m1_ek/script/fsp.ld b/hw/bsp/ra/boards/ra6m1_ek/script/fsp.ld new file mode 100644 index 000000000..627ffe4d9 --- /dev/null +++ b/hw/bsp/ra/boards/ra6m1_ek/script/fsp.ld @@ -0,0 +1,766 @@ +/* + Linker File for Renesas FSP +*/ + +INCLUDE memory_regions.ld + +/* Uncomment and set XIP_SECONDARY_SLOT_IMAGE to 1 below for the secondary XIP application image.*/ +/* + XIP_SECONDARY_SLOT_IMAGE = 1; +*/ + +QSPI_FLASH_PRV_LENGTH = DEFINED(QSPI_FLASH_SIZE) ? ABSOLUTE(QSPI_FLASH_SIZE) : ABSOLUTE(QSPI_FLASH_LENGTH); +OSPI_DEVICE_0_PRV_LENGTH = DEFINED(OSPI_DEVICE_0_SIZE) ? ABSOLUTE(OSPI_DEVICE_0_SIZE) : ABSOLUTE(OSPI_DEVICE_0_LENGTH); +OSPI_DEVICE_1_PRV_LENGTH = DEFINED(OSPI_DEVICE_1_SIZE) ? ABSOLUTE(OSPI_DEVICE_1_SIZE) : ABSOLUTE(OSPI_DEVICE_1_LENGTH); + +/* If a flat (secure) project has DEFINED RAM_NS_BUFFER_LENGTH, then emit IDAU symbols to allocate non-secure RAM. */ +__RESERVE_NS_RAM = !DEFINED(PROJECT_NONSECURE) && DEFINED(RAM_NS_BUFFER_LENGTH) && (OPTION_SETTING_S_LENGTH != 0); + +ITCM_START = DEFINED(ITCM_START)? ITCM_START : 0; +ITCM_LENGTH = DEFINED(ITCM_LENGTH)? ITCM_LENGTH : 0; +DTCM_START = DEFINED(DTCM_START)? DTCM_START : 0; +DTCM_LENGTH = DEFINED(DTCM_LENGTH)? DTCM_LENGTH : 0; +RAM_NS_BUFFER_BLOCK_LENGTH = DEFINED(RAM_NS_BUFFER_LENGTH) ? ALIGN(RAM_NS_BUFFER_LENGTH, 8192) : 0; +RAM_NS_BUFFER_LENGTH = DEFINED(RAM_NS_BUFFER_LENGTH) ? RAM_NS_BUFFER_LENGTH : 0; +RAM_NS_BUFFER_START = RAM_START + RAM_LENGTH - RAM_NS_BUFFER_LENGTH; +RAM_NS_BUFFER_BLOCK_START = RAM_START + RAM_LENGTH - RAM_NS_BUFFER_BLOCK_LENGTH; + +OPTION_SETTING_START_NS = DEFINED(PROJECT_NONSECURE) ? OPTION_SETTING_START : OPTION_SETTING_START + 0x80; + +/* This definition is used to avoid moving the counter in OPTION_SETTING regions for projects that should not configure option settings. + * Bootloader images do not configure option settings because they are owned by the bootloader. + * FSP_BOOTABLE_IMAGE is only defined in bootloader images. */ +__bl_FSP_BOOTABLE_IMAGE = 1; +__bln_FSP_BOOTABLE_IMAGE = 1; +PROJECT_SECURE_OR_FLAT = (!DEFINED(PROJECT_NONSECURE) || DEFINED(PROJECT_SECURE)) && OPTION_SETTING_LENGTH && !DEFINED(FSP_BOOTABLE_IMAGE); +USE_OPTION_SETTING_NS = DEFINED(PROJECT_NONSECURE) && !DEFINED(FSP_BOOTABLE_IMAGE); + +__bl_FLASH_IMAGE_START = !DEFINED(FLASH_BOOTLOADER_LENGTH) ? 0 : + FLASH_APPLICATION_IMAGE_NUMBER == 1 ? FLASH_START + FLASH_BOOTLOADER_LENGTH + FLASH_BOOTLOADER_HEADER_LENGTH : + (DEFINED(BOOTLOADER_SECONDARY_USE_QSPI) || DEFINED(BOOTLOADER_SECONDARY_USE_OSPI_B)) ? FLASH_START + FLASH_BOOTLOADER_LENGTH + FLASH_BOOTLOADER_SCRATCH_LENGTH + FLASH_BOOTLOADER_HEADER_LENGTH : + FLASH_START + FLASH_BOOTLOADER_LENGTH + FLASH_BOOTLOADER_SCRATCH_LENGTH + FLASH_APPLICATION_S_LENGTH + FLASH_BOOTLOADER_HEADER_LENGTH; +__bl_FLASH_IMAGE_LENGTH = !DEFINED(FLASH_BOOTLOADER_LENGTH) ? 0 : + FLASH_APPLICATION_S_LENGTH - FLASH_BOOTLOADER_HEADER_LENGTH; +__bl_FLASH_IMAGE_END = __bl_FLASH_IMAGE_START + __bl_FLASH_IMAGE_LENGTH; +__bl_XIP_SECONDARY_FLASH_IMAGE_START = !DEFINED(FLASH_BOOTLOADER_LENGTH) ? 0 : + FLASH_START + FLASH_BOOTLOADER_LENGTH + FLASH_APPLICATION_S_LENGTH + FLASH_BOOTLOADER_HEADER_LENGTH; +__bl_XIP_SECONDARY_FLASH_IMAGE_END = __bl_XIP_SECONDARY_FLASH_IMAGE_START + __bl_FLASH_IMAGE_LENGTH; +__bl_FLASH_NS_START = !DEFINED(FLASH_BOOTLOADER_LENGTH) ? 0 : + FLASH_APPLICATION_NS_LENGTH == 0 ? __bl_FLASH_IMAGE_END : + __bl_FLASH_IMAGE_START - FLASH_BOOTLOADER_HEADER_LENGTH + FLASH_APPLICATION_S_LENGTH; +__bl_FLASH_NSC_START = !DEFINED(FLASH_BOOTLOADER_LENGTH) ? 0 : + FLASH_APPLICATION_NS_LENGTH == 0 ? __bl_FLASH_IMAGE_END : + __bl_FLASH_IMAGE_END - FLASH_APPLICATION_NSC_LENGTH; +__bl_RAM_NS_START = !DEFINED(FLASH_BOOTLOADER_LENGTH) ? 0 : + FLASH_APPLICATION_NS_LENGTH == 0 ? RAM_START + RAM_LENGTH : + RAM_START + RAM_LENGTH - RAM_APPLICATION_NS_LENGTH; +__bl_RAM_NSC_START = !DEFINED(FLASH_BOOTLOADER_LENGTH) ? 0 : + FLASH_APPLICATION_NS_LENGTH == 0 ? RAM_START + RAM_LENGTH : + __bl_RAM_NS_START - RAM_APPLICATION_NSC_LENGTH; +__bl_FLASH_NS_IMAGE_START = !DEFINED(FLASH_BOOTLOADER_LENGTH) ? 0 : + FLASH_APPLICATION_NS_LENGTH == 0 ? __bl_FLASH_IMAGE_END : + __bl_FLASH_NS_START + FLASH_BOOTLOADER_HEADER_LENGTH_2; +__bln_FLASH_IMAGE_START = __bl_FLASH_NS_IMAGE_START | (!DEFINED (NS_OFFSET_START) ? 0 : NS_OFFSET_START); +__bln_FLASH_IMAGE_LENGTH = !DEFINED(FLASH_BOOTLOADER_LENGTH) ? 0 : + FLASH_APPLICATION_NS_LENGTH == 0 ? __bl_FLASH_IMAGE_END : + FLASH_APPLICATION_NS_LENGTH - FLASH_BOOTLOADER_HEADER_LENGTH_2; + +XIP_SECONDARY_SLOT_IMAGE = DEFINED(XIP_SECONDARY_SLOT_IMAGE) ? XIP_SECONDARY_SLOT_IMAGE : 0; +FLASH_ORIGIN = !DEFINED(FLASH_IMAGE_START) ? FLASH_START : + XIP_SECONDARY_SLOT_IMAGE == 1 ? XIP_SECONDARY_FLASH_IMAGE_START : + FLASH_IMAGE_START; +LIMITED_FLASH_LENGTH = DEFINED(FLASH_IMAGE_LENGTH) ? FLASH_IMAGE_LENGTH : + DEFINED(FLASH_BOOTLOADER_LENGTH) ? FLASH_BOOTLOADER_LENGTH : + FLASH_LENGTH; +OPTION_SETTING_SAS_SIZE = 0x34; +OPTION_SETTING_SAS_LENGTH = !DEFINED(OPTION_SETTING_LENGTH) ? 0 : + OPTION_SETTING_LENGTH == 0 ? 0 : + OPTION_SETTING_LENGTH - OPTION_SETTING_SAS_SIZE; + +/* Define memory regions. */ +MEMORY +{ + ITCM (rx) : ORIGIN = ITCM_START, LENGTH = ITCM_LENGTH + DTCM (rwx) : ORIGIN = DTCM_START, LENGTH = DTCM_LENGTH + FLASH (rx) : ORIGIN = FLASH_ORIGIN, LENGTH = LIMITED_FLASH_LENGTH + RAM (rwx) : ORIGIN = RAM_START, LENGTH = RAM_LENGTH + DATA_FLASH (rx) : ORIGIN = DATA_FLASH_START, LENGTH = DATA_FLASH_LENGTH + QSPI_FLASH (rx) : ORIGIN = QSPI_FLASH_START, LENGTH = QSPI_FLASH_PRV_LENGTH + OSPI_DEVICE_0 (rx) : ORIGIN = OSPI_DEVICE_0_START, LENGTH = OSPI_DEVICE_0_PRV_LENGTH + OSPI_DEVICE_1 (rx) : ORIGIN = OSPI_DEVICE_1_START, LENGTH = OSPI_DEVICE_1_PRV_LENGTH + OSPI_DEVICE_0_RAM (rwx) : ORIGIN = OSPI_DEVICE_0_START, LENGTH = OSPI_DEVICE_0_PRV_LENGTH + OSPI_DEVICE_1_RAM (rwx) : ORIGIN = OSPI_DEVICE_1_START, LENGTH = OSPI_DEVICE_1_PRV_LENGTH + SDRAM (rwx) : ORIGIN = SDRAM_START, LENGTH = SDRAM_LENGTH + OPTION_SETTING (r) : ORIGIN = OPTION_SETTING_START, LENGTH = OPTION_SETTING_LENGTH + OPTION_SETTING_OFS (r) : ORIGIN = OPTION_SETTING_START, LENGTH = 0x18 + OPTION_SETTING_SAS (r) : ORIGIN = OPTION_SETTING_START + OPTION_SETTING_SAS_SIZE, LENGTH = OPTION_SETTING_SAS_LENGTH + OPTION_SETTING_S (r) : ORIGIN = OPTION_SETTING_S_START, LENGTH = OPTION_SETTING_S_LENGTH + ID_CODE (rx) : ORIGIN = ID_CODE_START, LENGTH = ID_CODE_LENGTH +} + +/* Library configurations */ +GROUP(libgcc.a libc.a libm.a) + +/* Linker script to place sections and symbol values. Should be used together + * with other linker script that defines memory regions FLASH and RAM. + * It references following symbols, which must be DEFINED in code: + * Reset_Handler : Entry of reset handler + * + * It defines following symbols, which code can use without definition: + * __exidx_start + * __exidx_end + * __copy_table_start__ + * __copy_table_end__ + * __zero_table_start__ + * __zero_table_end__ + * __etext + * __data_start__ + * __preinit_array_start + * __preinit_array_end + * __init_array_start + * __init_array_end + * __fini_array_start + * __fini_array_end + * __data_end__ + * __bss_start__ + * __bss_end__ + * __HeapLimit + * __StackLimit + * __StackTop + * __stack + * __Vectors_End + * __Vectors_Size + * __qspi_flash_start__ + * __qspi_flash_end__ + * __qspi_flash_code_size__ + * __qspi_region_max_size__ + * __qspi_region_start_address__ + * __qspi_region_end_address__ + * __ospi_device_0_start__ + * __ospi_device_0_end__ + * __ospi_device_0_code_size__ + * __ospi_device_0_region_max_size__ + * __ospi_device_0_region_start_address__ + * __ospi_device_0_region_end_address__ + * __ospi_device_1_start__ + * __ospi_device_1_end__ + * __ospi_device_1_code_size__ + * __ospi_device_1_region_max_size__ + * __ospi_device_1_region_start_address__ + * __ospi_device_1_region_end_address__ + */ +ENTRY(Reset_Handler) + +SECTIONS +{ + .text : + { + __tz_FLASH_S = ABSOLUTE(FLASH_START); + __ROM_Start = .; + + /* Even though the vector table is not 256 entries (1KB) long, we still allocate that much + * space because ROM registers are at address 0x400 and there is very little space + * in between. */ + KEEP(*(.fixed_vectors*)) + KEEP(*(.application_vectors*)) + __Vectors_End = .; + + /* Some devices have a gap of code flash between the vector table and ROM Registers. + * The flash gap section allows applications to place code and data in this section. */ + *(.flash_gap*) + + /* ROM Registers start at address 0x00000400 for devices that do not have the OPTION_SETTING region. */ + . = OPTION_SETTING_LENGTH > 0 ? . : __ROM_Start + 0x400; + KEEP(*(.rom_registers*)) + + /* Allocate flash write-boundary-aligned + * space for sce9 wrapped public keys for mcuboot if the module is used. + */ + KEEP(*(.mcuboot_sce9_key*)) + + *(.text*) + + KEEP(*(.version)) + KEEP(*(.init)) + KEEP(*(.fini)) + + /* .ctors */ + *crtbegin.o(.ctors) + *crtbegin?.o(.ctors) + *(EXCLUDE_FILE(*crtend?.o *crtend.o) .ctors) + *(SORT(.ctors.*)) + *(.ctors) + + /* .dtors */ + *crtbegin.o(.dtors) + *crtbegin?.o(.dtors) + *(EXCLUDE_FILE(*crtend?.o *crtend.o) .dtors) + *(SORT(.dtors.*)) + *(.dtors) + + *(.rodata*) + __usb_dev_descriptor_start_fs = .; + KEEP(*(.usb_device_desc_fs*)) + __usb_cfg_descriptor_start_fs = .; + KEEP(*(.usb_config_desc_fs*)) + __usb_interface_descriptor_start_fs = .; + KEEP(*(.usb_interface_desc_fs*)) + __usb_descriptor_end_fs = .; + __usb_dev_descriptor_start_hs = .; + KEEP(*(.usb_device_desc_hs*)) + __usb_cfg_descriptor_start_hs = .; + KEEP(*(.usb_config_desc_hs*)) + __usb_interface_descriptor_start_hs = .; + KEEP(*(.usb_interface_desc_hs*)) + __usb_descriptor_end_hs = .; + + KEEP(*(.eh_frame*)) + + __ROM_End = .; + } > FLASH = 0xFF + + __Vectors_Size = __Vectors_End - __Vectors; + + . = .; + __itcm_data_pre_location = .; + + /* Initialized ITCM data. */ + /* Aligned to FCACHE2 for RA8. */ + .itcm_data : ALIGN(16) + { + /* Start of ITCM Secure Trustzone region. */ + __tz_ITCM_S = ABSOLUTE(ITCM_START); + + /* All ITCM data start */ + __itcm_data_start = .; + + KEEP(*(.itcm_data*)) + + /* Pad to eight byte alignment in case of ECC initialization. Fill zero. */ + . = ALIGN(8); + + /* All ITCM data end */ + __itcm_data_end = .; + + /* + * Start of the ITCM Non-Secure Trustzone region. + * ITCM_NS_START can be used to set a fixed address for non-secure ITCM in secure projects or flat projects. + */ + __tz_ITCM_N = DEFINED(ITCM_NS_START) ? ABSOLUTE(ITCM_NS_START) : ALIGN(__itcm_data_end, 8192); + } > ITCM AT > FLASH = 0x00 + + /* Addresses exported for ITCM initialization. */ + __itcm_data_init_start = LOADADDR(.itcm_data); + __itcm_data_init_end = LOADADDR(.itcm_data) + SIZEOF(.itcm_data); + + ASSERT(ORIGIN(ITCM) % 8 == 0, "ITCM memory region origin must be aligned to 8 bytes.") + ASSERT(LENGTH(ITCM) % 8 == 0, "ITCM memory region length must be a multiple of 8 bytes.") + ASSERT(LOADADDR(.itcm_data) % 16 == 0, ".itcm_data section must be aligned to 16 bytes.") + ASSERT(SIZEOF(.itcm_data) % 8 == 0, ".itcm_data section size must be a multiple of 8 bytes.") + + /* Restore location counter. */ + /* If ITCM is not present, this will be the address stored in '.' before ALIGN was attempted. */ + /* If ITCM is present, this will be the absolute address that follows the ITCM ROM location. */ + . = (SIZEOF(.itcm_data) > 0) ? __itcm_data_init_end : __itcm_data_pre_location; + + __exidx_start = .; + /DISCARD/ : + { + *(.ARM.extab* .gnu.linkonce.armextab.*) + *(.ARM.exidx* .gnu.linkonce.armexidx.*) + } + __exidx_end = .; + + /* To copy multiple ROM to RAM sections, + * uncomment .copy.table section and, + * define __STARTUP_COPY_MULTIPLE in startup_ARMCMx.S */ + /* + .copy.table : + { + . = ALIGN(4); + __copy_table_start__ = .; + LONG (__etext) + LONG (__data_start__) + LONG (__data_end__ - __data_start__) + LONG (__etext2) + LONG (__data2_start__) + LONG (__data2_end__ - __data2_start__) + __copy_table_end__ = .; + } > FLASH + */ + + /* To clear multiple BSS sections, + * uncomment .zero.table section and, + * define __STARTUP_CLEAR_BSS_MULTIPLE in startup_ARMCMx.S */ + /* + .zero.table : + { + . = ALIGN(4); + __zero_table_start__ = .; + LONG (__bss_start__) + LONG (__bss_end__ - __bss_start__) + LONG (__bss2_start__) + LONG (__bss2_end__ - __bss2_start__) + __zero_table_end__ = .; + } > FLASH + */ + + __etext = .; + + __tz_RAM_S = ORIGIN(RAM); + + /* If DTC is used, put the DTC vector table at the start of SRAM. + This avoids memory holes due to 1K alignment required by it. */ + .fsp_dtc_vector_table (NOLOAD) : + { + . = ORIGIN(RAM); + *(.fsp_dtc_vector_table) + } > RAM + + /* Initialized data section. */ + .data : + { + __data_start__ = .; + . = ALIGN(4); + + __Code_In_RAM_Start = .; + + KEEP(*(.code_in_ram*)) + __Code_In_RAM_End = .; + + *(vtable) + /* Don't use *(.data*) because it will place data meant for .data_flash in this section. */ + *(.data.*) + *(.data) + + . = ALIGN(4); + /* preinit data */ + PROVIDE_HIDDEN (__preinit_array_start = .); + KEEP(*(.preinit_array)) + PROVIDE_HIDDEN (__preinit_array_end = .); + + . = ALIGN(4); + /* init data */ + PROVIDE_HIDDEN (__init_array_start = .); + KEEP(*(SORT(.init_array.*))) + KEEP(*(.init_array)) + PROVIDE_HIDDEN (__init_array_end = .); + + + . = ALIGN(4); + /* finit data */ + PROVIDE_HIDDEN (__fini_array_start = .); + KEEP(*(SORT(.fini_array.*))) + KEEP(*(.fini_array)) + PROVIDE_HIDDEN (__fini_array_end = .); + + KEEP(*(.jcr*)) + + . = ALIGN(4); + + /* All data end */ + __data_end__ = .; + + } > RAM AT > FLASH + + . = .; + __dtcm_data_pre_location = LOADADDR(.data) + SIZEOF(.data); + + /* Initialized DTCM data. */ + /* Aligned to FCACHE2 for RA8. */ + .dtcm_data : ALIGN(16) + { + /* Start of DTCM Secure Trustzone region. */ + __tz_DTCM_S = ABSOLUTE(DTCM_START); + + /* Initialized DTCM data start */ + __dtcm_data_start = .; + + KEEP(*(.dtcm_data*)) + + /* Pad to eight byte alignment in case of ECC initialization. Fill zero. */ + . = ALIGN(8); + + /* Initialized DTCM data end */ + __dtcm_data_end = .; + } > DTCM AT > FLASH = 0x00 + + . = __dtcm_data_end; + /* Uninitialized DTCM data. */ + /* ALIGN appears on the left side of the colon because it is being used to assign the VMA directly, as opposed to a right side appearance which would control the LMA. */ + .dtcm_bss ALIGN(8) (NOLOAD) : + { + /* Uninitialized DTCM data start */ + __dtcm_bss_start = .; + + KEEP(*(.dtcm_bss*)) + + /* Pad to eight byte alignment in case of ECC initialization. No fill because of NOLOAD. */ + . = ALIGN(8); + + /* Uninitialized DTCM data end */ + __dtcm_bss_end = .; + + /* + * Start of the DTCM Non-Secure Trustzone region. + * DTCM_NS_START can be used to set a fixed address for non-secure DTCM in secure projects or flat projects. + */ + __tz_DTCM_N = DEFINED(DTCM_NS_START) ? ABSOLUTE(DTCM_NS_START) : ALIGN(__dtcm_bss_end, 8192); + } > DTCM + + /* Addresses exported for DTCM initialization. */ + __dtcm_data_init_start = LOADADDR(.dtcm_data); + __dtcm_data_init_end = LOADADDR(.dtcm_data) + SIZEOF(.dtcm_data); + + ASSERT(ORIGIN(DTCM) % 8 == 0, "DTCM memory region origin must be aligned to 8 bytes.") + ASSERT(LENGTH(DTCM) % 8 == 0, "DTCM memory region length must be a multiple of 8 bytes.") + ASSERT(LOADADDR(.dtcm_bss) == ADDR(.dtcm_bss), ".dtcm_bss has (VMA != LMA) but should be NOLOAD (VMA == LMA).") + ASSERT(LOADADDR(.dtcm_data) % 16 == 0, ".dtcm_data section must be aligned to 16 bytes.") + ASSERT(SIZEOF(.dtcm_data) % 8 == 0, ".dtcm_data section size must be a multiple of 8 bytes.") + ASSERT(LOADADDR(.dtcm_bss) % 8 == 0, ".dtcm_bss section must be aligned to 8 bytes.") + ASSERT(SIZEOF(.dtcm_bss) % 8 == 0, ".dtcm_bss section size must be a multiple of 8 bytes.") + ASSERT(__dtcm_bss_start == __dtcm_data_end, ".dtcm_bss section is not adjacent to .dtcm_data section.") + + /* Restore location counter. */ + /* If DTCM is not present, this will be the address stored in '.' before ALIGN was attempted. */ + /* If DTCM is present, this will be the absolute address that follows the DTCM ROM location. */ + . = (SIZEOF(.dtcm_data) > 0) ? __dtcm_data_init_end : __dtcm_data_pre_location; + + /* TrustZone Secure Gateway Stubs Section */ + + /* Store location counter for SPI non-retentive sections. */ + sgstubs_pre_location = .; + + /* Determine the secure gateway stubs address either by the provided linker variable or the next 1024-byte block. */ + SGSTUBS_LOC = (DEFINED(PROJECT_SECURE) && DEFINED(FLASH_NSC_START)) ? ABSOLUTE(FLASH_NSC_START) : ALIGN(1024); + .gnu.sgstubs SGSTUBS_LOC : ALIGN(1024) + { + __tz_FLASH_C = DEFINED(FLASH_NSC_START) ? ABSOLUTE(FLASH_NSC_START) : __RESERVE_NS_RAM ? ABSOLUTE(FLASH_START + FLASH_LENGTH) : ALIGN(1024); + _start_sg = .; + *(.gnu.sgstubs*) + . = ALIGN(32); + _end_sg = .; + } > FLASH + + __tz_FLASH_N = DEFINED(FLASH_NS_START) ? ABSOLUTE(FLASH_NS_START) : __RESERVE_NS_RAM ? ABSOLUTE(FLASH_START + FLASH_LENGTH) : FLASH_LENGTH < 32768 ? FLASH_LENGTH : ALIGN(32768); + FLASH_NS_IMAGE_START = DEFINED(FLASH_NS_IMAGE_START) ? FLASH_NS_IMAGE_START : __tz_FLASH_N; + + /* Note: There are no secure/non-secure boundaries for QSPI. These symbols are provided for the RA configuration tool. */ + __tz_QSPI_FLASH_S = ORIGIN(QSPI_FLASH); + + /* QSPI_FLASH section to be downloaded via debugger */ + .qspi_flash : + { + __qspi_flash_start__ = .; + KEEP(*(.qspi_flash*)) + KEEP(*(.code_in_qspi*)) + __qspi_flash_end__ = .; + } > QSPI_FLASH + __qspi_flash_code_size__ = __qspi_flash_end__ - __qspi_flash_start__; + + /* QSPI_FLASH non-retentive section, creates a copy in internal flash that can be copied to QSPI */ + __qspi_flash_code_addr__ = sgstubs_pre_location; + .qspi_non_retentive : AT(__qspi_flash_code_addr__) + { + __qspi_non_retentive_start__ = .; + KEEP(*(.qspi_non_retentive*)) + __qspi_non_retentive_end__ = .; + } > QSPI_FLASH + __qspi_non_retentive_size__ = __qspi_non_retentive_end__ - __qspi_non_retentive_start__; + + __qspi_region_max_size__ = 0x4000000; /* Must be the same as defined in MEMORY above */ + __qspi_region_start_address__ = __qspi_flash_start__; + __qspi_region_end_address__ = __qspi_flash_start__ + __qspi_region_max_size__; + + /* Note: There are no secure/non-secure boundaries for QSPI. These symbols are provided for the RA configuration tool. */ + __tz_QSPI_FLASH_N = __qspi_non_retentive_end__; + + /* Support for OctaRAM */ + .OSPI_DEVICE_0_NO_LOAD (NOLOAD): + { + . = ALIGN(4); + __ospi_device_0_start__ = .; + *(.ospi_device_0_no_load*) + . = ALIGN(4); + __ospi_device_0_end__ = .; + } > OSPI_DEVICE_0_RAM + + .OSPI_DEVICE_1_NO_LOAD (NOLOAD): + { + . = ALIGN(4); + __ospi_device_1_start__ = .; + *(.ospi_device_1_no_load*) + . = ALIGN(4); + __ospi_device_1_end__ = .; + } > OSPI_DEVICE_1_RAM + + /* Note: There are no secure/non-secure boundaries for QSPI. These symbols are provided for the RA configuration tool. */ + __tz_OSPI_DEVICE_0_S = ORIGIN(OSPI_DEVICE_0); + + /* OSPI_DEVICE_0 section to be downloaded via debugger */ + .OSPI_DEVICE_0 : + { + __ospi_device_0_start__ = .; + KEEP(*(.ospi_device_0*)) + KEEP(*(.code_in_ospi_device_0*)) + __ospi_device_0_end__ = .; + } > OSPI_DEVICE_0 + __ospi_device_0_code_size__ = __ospi_device_0_end__ - __ospi_device_0_start__; + + /* OSPI_DEVICE_0 non-retentive section, creates a copy in internal flash that can be copied to OSPI */ + __ospi_device_0_code_addr__ = sgstubs_pre_location + (SIZEOF(.qspi_non_retentive)); + .ospi_device_0_non_retentive : AT(__ospi_device_0_code_addr__) + { + __ospi_device_0_non_retentive_start__ = .; + KEEP(*(.ospi_device_0_non_retentive*)) + __ospi_device_0_non_retentive_end__ = .; + } > OSPI_DEVICE_0 + __ospi_device_0_non_retentive_size__ = __ospi_device_0_non_retentive_end__ - __ospi_device_0_non_retentive_start__; + + __ospi_device_0_region_max_size__ = 0x8000000; /* Must be the same as defined in MEMORY above */ + __ospi_device_0_region_start_address__ = __ospi_device_0_start__; + __ospi_device_0_region_end_address__ = __ospi_device_0_start__ + __ospi_device_0_region_max_size__; + + /* Note: There are no secure/non-secure boundaries for OSPI. These symbols are provided for the RA configuration tool. */ + __tz_OSPI_DEVICE_0_N = __ospi_device_0_non_retentive_end__; + + /* Note: There are no secure/non-secure boundaries for OSPI. These symbols are provided for the RA configuration tool. */ + __tz_OSPI_DEVICE_1_S = ORIGIN(OSPI_DEVICE_1); + + /* OSPI_DEVICE_1 section to be downloaded via debugger */ + .OSPI_DEVICE_1 : + { + __ospi_device_1_start__ = .; + KEEP(*(.ospi_device_1*)) + KEEP(*(.code_in_ospi_device_1*)) + __ospi_device_1_end__ = .; + } > OSPI_DEVICE_1 + __ospi_device_1_code_size__ = __ospi_device_1_end__ - __ospi_device_1_start__; + + /* OSPI_DEVICE_1 non-retentive section, creates a copy in internal flash that can be copied to OSPI */ + __ospi_device_1_code_addr__ = sgstubs_pre_location + (SIZEOF(.qspi_non_retentive) + SIZEOF(.ospi_device_0_non_retentive)); + .ospi_device_1_non_retentive : AT(__ospi_device_1_code_addr__) + { + __ospi_device_1_non_retentive_start__ = .; + KEEP(*(.ospi_device_1_non_retentive*)) + __ospi_device_1_non_retentive_end__ = .; + } > OSPI_DEVICE_1 + __ospi_device_1_non_retentive_size__ = __ospi_device_1_non_retentive_end__ - __ospi_device_1_non_retentive_start__; + + __ospi_device_1_region_max_size__ = 0x10000000; /* Must be the same as defined in MEMORY above */ + __ospi_device_1_region_start_address__ = __ospi_device_1_start__; + __ospi_device_1_region_end_address__ = __ospi_device_1_start__ + __ospi_device_1_region_max_size__; + + /* Note: There are no secure/non-secure boundaries for OSPI. These symbols are provided for the RA configuration tool. */ + __tz_OSPI_DEVICE_1_N = __ospi_device_1_non_retentive_end__; + + .noinit (NOLOAD): + { + . = ALIGN(4); + __noinit_start = .; + KEEP(*(.noinit*)) + . = ALIGN(8); + /* Place the FreeRTOS heap here so that the __HeapLimit calculation does not include the freertos heap. */ + KEEP(*(.heap.*)) + __noinit_end = .; + } > RAM + + .bss : + { + . = ALIGN(4); + __bss_start__ = .; + *(.bss*) + *(COMMON) + . = ALIGN(4); + __bss_end__ = .; + } > RAM + + .heap (NOLOAD): + { + . = ALIGN(8); + __HeapBase = .; + /* Place the STD heap here. */ + KEEP(*(.heap)) + __HeapLimit = .; + } > RAM + + /* Stacks are stored in this section. */ + .stack_dummy (NOLOAD): + { + . = ALIGN(8); + __StackLimit = .; + /* Main stack */ + KEEP(*(.stack)) + __StackTop = .; + /* Thread stacks */ + KEEP(*(.stack*)) + __StackTopAll = .; + } > RAM + + PROVIDE(__stack = __StackTopAll); + + /* This symbol represents the end of user allocated RAM. The RAM after this symbol can be used + at run time for things such as ThreadX memory pool allocations. */ + __RAM_segment_used_end__ = ALIGN(__StackTopAll , 4); + + /* RAM_NSC_START can be used to set a fixed address for non-secure callable RAM in secure projects. + * If it is not specified, the address for NSC RAM is the end of RAM aligned to a 1K boundary. + * In flat projects that require non-secure RAM, this variable is set to the start of non-secure RAM. */ + __tz_RAM_C = DEFINED(RAM_NSC_START) ? ABSOLUTE(RAM_NSC_START - RAM_NS_BUFFER_BLOCK_LENGTH) : __RESERVE_NS_RAM ? ABSOLUTE(RAM_NS_BUFFER_BLOCK_START) : ALIGN(__RAM_segment_used_end__, 1024); + + /* RAM_NS_START can be used to set a fixed address for non-secure RAM in secure projects or flat projects. + * RAM_NS_BUFFER_BLOCK_LENGTH is used to allocate non-secure buffers in a flat project. If it is not + * specified, the address for NSC RAM is the end of RAM aligned to an 8K boundary. + * In flat projects that require non-secure RAM, this variable is set to the start of non-secure RAM. */ + __tz_RAM_N = DEFINED(RAM_NS_START) ? ABSOLUTE(RAM_NS_START - RAM_NS_BUFFER_BLOCK_LENGTH) : __RESERVE_NS_RAM ? ABSOLUTE(RAM_NS_BUFFER_BLOCK_START) : ALIGN(__tz_RAM_C, 8192); + + /* Non-secure buffers must be in non-secure RAM. This is primarily used for the EDMAC in flat projects. + * The EDMAC is a non-secure bus master and can only access non-secure RAM. */ + .ns_buffer (NOLOAD): + { + /* Allocate RAM on a 32-byte boundary to help with placement of Ethernet buffers. */ + . = __RESERVE_NS_RAM ? ABSOLUTE(RAM_NS_BUFFER_START & 0xFFFFFFE0) : .; + + KEEP(*(.ns_buffer*)) + } > RAM + + /* Data flash. */ + .data_flash : + { + . = ORIGIN(DATA_FLASH); + __tz_DATA_FLASH_S = .; + __Data_Flash_Start = .; + KEEP(*(.data_flash*)) + __Data_Flash_End = .; + + __tz_DATA_FLASH_N = DEFINED(DATA_FLASH_NS_START) ? ABSOLUTE(DATA_FLASH_NS_START) : __RESERVE_NS_RAM ? ABSOLUTE(DATA_FLASH_START + DATA_FLASH_LENGTH) : ALIGN(1024); + } > DATA_FLASH + + /* Note: There are no secure/non-secure boundaries for SDRAM. These symbols are provided for the RA configuration tool. */ + __tz_SDRAM_S = ORIGIN(SDRAM); + + /* SDRAM */ + .sdram (NOLOAD): + { + __SDRAM_Start = .; + KEEP(*(.sdram*)) + KEEP(*(.frame*)) + __SDRAM_End = .; + } > SDRAM + + /* Note: There are no secure/non-secure boundaries for SDRAM. These symbols are provided for the RA configuration tool. */ + __tz_SDRAM_N = __SDRAM_End; + + /* Note: There are no secure/non-secure boundaries for ID_CODE. These symbols are provided for the RA configuration tool. */ + __tz_ID_CODE_S = ORIGIN(ID_CODE); + + /* Note: There are no secure/non-secure boundaries for ID_CODE. These symbols are provided for the RA configuration tool. + * Set this symbol to the same value as __tz_ID_CODE_S so the RA configuration tool does not split the ID_CODE + * memory region between TrustZone projects. */ + __tz_ID_CODE_N = __tz_ID_CODE_S; + + .id_code : + { + __ID_Code_Start = .; + KEEP(*(.id_code*)) + __ID_Code_End = .; + } > ID_CODE + + /* Symbol required for RA Configuration tool. */ + __tz_OPTION_SETTING_S = ORIGIN(OPTION_SETTING_OFS); + + .option_setting_ofs : + { + __OPTION_SETTING_OFS_Start = .; + KEEP(*(.option_setting_ofs0)) + . = PROJECT_SECURE_OR_FLAT ? __OPTION_SETTING_OFS_Start + 0x04 : __OPTION_SETTING_OFS_Start; + KEEP(*(.option_setting_ofs2)) + . = PROJECT_SECURE_OR_FLAT ? __OPTION_SETTING_OFS_Start + 0x10 : __OPTION_SETTING_OFS_Start; + KEEP(*(.option_setting_dualsel)) + __OPTION_SETTING_OFS_End = .; + } > OPTION_SETTING_OFS = 0xFF + + .option_setting_sas : + { + __OPTION_SETTING_SAS_Start = .; + KEEP(*(.option_setting_sas)) + __OPTION_SETTING_SAS_End = .; + } > OPTION_SETTING_SAS = 0xFF + + /* Symbol required for RA Configuration tool. */ + __tz_OPTION_SETTING_N = ABSOLUTE(OPTION_SETTING_START_NS); + + .option_setting_ns : + { + __OPTION_SETTING_NS_Start = .; + KEEP(*(.option_setting_ofs1)) + . = USE_OPTION_SETTING_NS ? __OPTION_SETTING_NS_Start + 0x04 : __OPTION_SETTING_NS_Start; + KEEP(*(.option_setting_ofs3)) + . = USE_OPTION_SETTING_NS ? __OPTION_SETTING_NS_Start + 0x10 : __OPTION_SETTING_NS_Start; + KEEP(*(.option_setting_banksel)) + . = USE_OPTION_SETTING_NS ? __OPTION_SETTING_NS_Start + 0x40 : __OPTION_SETTING_NS_Start; + KEEP(*(.option_setting_bps0)) + . = USE_OPTION_SETTING_NS ? __OPTION_SETTING_NS_Start + 0x44 : __OPTION_SETTING_NS_Start; + KEEP(*(.option_setting_bps1)) + . = USE_OPTION_SETTING_NS ? __OPTION_SETTING_NS_Start + 0x48 : __OPTION_SETTING_NS_Start; + KEEP(*(.option_setting_bps2)) + . = USE_OPTION_SETTING_NS ? __OPTION_SETTING_NS_Start + 0x4C : __OPTION_SETTING_NS_Start; + KEEP(*(.option_setting_bps3)) + . = USE_OPTION_SETTING_NS ? __OPTION_SETTING_NS_Start + 0x60 : __OPTION_SETTING_NS_Start; + KEEP(*(.option_setting_pbps0)) + . = USE_OPTION_SETTING_NS ? __OPTION_SETTING_NS_Start + 0x64 : __OPTION_SETTING_NS_Start; + KEEP(*(.option_setting_pbps1)) + . = USE_OPTION_SETTING_NS ? __OPTION_SETTING_NS_Start + 0x68 : __OPTION_SETTING_NS_Start; + KEEP(*(.option_setting_pbps2)) + . = USE_OPTION_SETTING_NS ? __OPTION_SETTING_NS_Start + 0x6C : __OPTION_SETTING_NS_Start; + KEEP(*(.option_setting_pbps3)) + __OPTION_SETTING_NS_End = .; + } > OPTION_SETTING = 0xFF + + /* Symbol required for RA Configuration tool. */ + __tz_OPTION_SETTING_S_S = ORIGIN(OPTION_SETTING_S); + + .option_setting_s : + { + __OPTION_SETTING_S_Start = .; + KEEP(*(.option_setting_ofs1_sec)) + . = PROJECT_SECURE_OR_FLAT ? __OPTION_SETTING_S_Start + 0x04 : __OPTION_SETTING_S_Start; + KEEP(*(.option_setting_ofs3_sec)) + . = PROJECT_SECURE_OR_FLAT ? __OPTION_SETTING_S_Start + 0x10 : __OPTION_SETTING_S_Start; + KEEP(*(.option_setting_banksel_sec)) + . = PROJECT_SECURE_OR_FLAT ? __OPTION_SETTING_S_Start + 0x40 : __OPTION_SETTING_S_Start; + KEEP(*(.option_setting_bps_sec0)) + . = PROJECT_SECURE_OR_FLAT ? __OPTION_SETTING_S_Start + 0x44 : __OPTION_SETTING_S_Start; + KEEP(*(.option_setting_bps_sec1)) + . = PROJECT_SECURE_OR_FLAT ? __OPTION_SETTING_S_Start + 0x48 : __OPTION_SETTING_S_Start; + KEEP(*(.option_setting_bps_sec2)) + . = PROJECT_SECURE_OR_FLAT ? __OPTION_SETTING_S_Start + 0x4C : __OPTION_SETTING_S_Start; + KEEP(*(.option_setting_bps_sec3)) + . = PROJECT_SECURE_OR_FLAT ? __OPTION_SETTING_S_Start + 0x60 : __OPTION_SETTING_S_Start; + KEEP(*(.option_setting_pbps_sec0)) + . = PROJECT_SECURE_OR_FLAT ? __OPTION_SETTING_S_Start + 0x64 : __OPTION_SETTING_S_Start; + KEEP(*(.option_setting_pbps_sec1)) + . = PROJECT_SECURE_OR_FLAT ? __OPTION_SETTING_S_Start + 0x68 : __OPTION_SETTING_S_Start; + KEEP(*(.option_setting_pbps_sec2)) + . = PROJECT_SECURE_OR_FLAT ? __OPTION_SETTING_S_Start + 0x6C : __OPTION_SETTING_S_Start; + KEEP(*(.option_setting_pbps_sec3)) + . = PROJECT_SECURE_OR_FLAT ? __OPTION_SETTING_S_Start + 0x80 : __OPTION_SETTING_S_Start; + KEEP(*(.option_setting_ofs1_sel)) + . = PROJECT_SECURE_OR_FLAT ? __OPTION_SETTING_S_Start + 0x84 : __OPTION_SETTING_S_Start; + KEEP(*(.option_setting_ofs3_sel)) + . = PROJECT_SECURE_OR_FLAT ? __OPTION_SETTING_S_Start + 0x90 : __OPTION_SETTING_S_Start; + KEEP(*(.option_setting_banksel_sel)) + . = PROJECT_SECURE_OR_FLAT ? __OPTION_SETTING_S_Start + 0xC0 : __OPTION_SETTING_S_Start; + KEEP(*(.option_setting_bps_sel0)) + . = PROJECT_SECURE_OR_FLAT ? __OPTION_SETTING_S_Start + 0xC4 : __OPTION_SETTING_S_Start; + KEEP(*(.option_setting_bps_sel1)) + . = PROJECT_SECURE_OR_FLAT ? __OPTION_SETTING_S_Start + 0xC8 : __OPTION_SETTING_S_Start; + KEEP(*(.option_setting_bps_sel2)) + . = PROJECT_SECURE_OR_FLAT ? __OPTION_SETTING_S_Start + 0xCC : __OPTION_SETTING_S_Start; + KEEP(*(.option_setting_bps_sel3)) + __OPTION_SETTING_S_End = .; + } > OPTION_SETTING_S = 0xFF + + /* Symbol required for RA Configuration tool. */ + __tz_OPTION_SETTING_S_N = __OPTION_SETTING_S_End; +} diff --git a/hw/bsp/ra/boards/ra6m1_ek/script/memory_regions.ld b/hw/bsp/ra/boards/ra6m1_ek/script/memory_regions.ld new file mode 100644 index 000000000..9d973c737 --- /dev/null +++ b/hw/bsp/ra/boards/ra6m1_ek/script/memory_regions.ld @@ -0,0 +1,22 @@ + + /* generated memory regions file - do not edit */ + RAM_START = 0x1FFE0000; + RAM_LENGTH = 0x40000; + FLASH_START = 0x00000000; + FLASH_LENGTH = 0x80000; + DATA_FLASH_START = 0x40100000; + DATA_FLASH_LENGTH = 0x2000; + OPTION_SETTING_START = 0x00000000; + OPTION_SETTING_LENGTH = 0x0; + OPTION_SETTING_S_START = 0x80000000; + OPTION_SETTING_S_LENGTH = 0x0; + ID_CODE_START = 0x0100A150; + ID_CODE_LENGTH = 0x10; + SDRAM_START = 0x80010000; + SDRAM_LENGTH = 0x0; + QSPI_FLASH_START = 0x60000000; + QSPI_FLASH_LENGTH = 0x4000000; + OSPI_DEVICE_0_START = 0x80020000; + OSPI_DEVICE_0_LENGTH = 0x0; + OSPI_DEVICE_1_START = 0x80030000; + OSPI_DEVICE_1_LENGTH = 0x0; diff --git a/hw/bsp/ra/boards/ra6m1_ek/smart_configurator/configuration.xml b/hw/bsp/ra/boards/ra6m1_ek/smart_configurator/configuration.xml new file mode 100644 index 000000000..2f373930c --- /dev/null +++ b/hw/bsp/ra/boards/ra6m1_ek/smart_configurator/configuration.xml @@ -0,0 +1,299 @@ + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + Simple application that blinks an LED. No RTOS included. + Renesas.RA_baremetal_blinky.5.6.0.pack + + + Board Support Package Common Files + Renesas.RA.5.6.0.pack + + + I/O Port + Renesas.RA.5.6.0.pack + + + Arm CMSIS Version 6 - Core (M) + Arm.CMSIS6.6.1.0+fsp.5.6.0.pack + + + RA6M1-EK Board Support Files + Renesas.RA_board_ra6m1_ek.5.6.0.pack + + + Board support package for R7FA6M1AD3CFP + Renesas.RA_mcu_ra6m1.5.6.0.pack + + + Board support package for RA6M1 + Renesas.RA_mcu_ra6m1.5.6.0.pack + + + Board support package for RA6M1 - FSP Data + Renesas.RA_mcu_ra6m1.5.6.0.pack + + + Board support package for RA6M1 - Events + Renesas.RA_mcu_ra6m1.5.6.0.pack + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + diff --git a/hw/bsp/ra/boards/ra6m5_ek/ra_cfg/fsp_cfg/bsp/bsp_mcu_family_cfg.h b/hw/bsp/ra/boards/ra6m5_ek/ra_cfg/fsp_cfg/bsp/bsp_mcu_family_cfg.h index d5428540f..c01219377 100644 --- a/hw/bsp/ra/boards/ra6m5_ek/ra_cfg/fsp_cfg/bsp/bsp_mcu_family_cfg.h +++ b/hw/bsp/ra/boards/ra6m5_ek/ra_cfg/fsp_cfg/bsp/bsp_mcu_family_cfg.h @@ -5,80 +5,80 @@ extern "C" { #endif -#include "bsp_mcu_device_pn_cfg.h" -#include "bsp_mcu_device_cfg.h" -#include "../../../ra/fsp/src/bsp/mcu/ra6m5/bsp_mcu_info.h" -#include "bsp_clock_cfg.h" - -#define BSP_MCU_GROUP_RA6M5 (1) -#define BSP_LOCO_HZ (32768) -#define BSP_MOCO_HZ (8000000) -#define BSP_SUB_CLOCK_HZ (32768) -#if BSP_CFG_HOCO_FREQUENCY == 0 -#define BSP_HOCO_HZ (16000000) -#elif BSP_CFG_HOCO_FREQUENCY == 1 - #define BSP_HOCO_HZ (18000000) -#elif BSP_CFG_HOCO_FREQUENCY == 2 - #define BSP_HOCO_HZ (20000000) -#else - #error "Invalid HOCO frequency chosen (BSP_CFG_HOCO_FREQUENCY) in bsp_clock_cfg.h" -#endif + #include "bsp_mcu_device_pn_cfg.h" + #include "bsp_mcu_device_cfg.h" + #include "../../../ra/fsp/src/bsp/mcu/ra6m5/bsp_mcu_info.h" + #include "bsp_clock_cfg.h" + #define BSP_MCU_GROUP_RA6M5 (1) + #define BSP_LOCO_HZ (32768) + #define BSP_MOCO_HZ (8000000) + #define BSP_SUB_CLOCK_HZ (32768) + #if BSP_CFG_HOCO_FREQUENCY == 0 + #define BSP_HOCO_HZ (16000000) + #elif BSP_CFG_HOCO_FREQUENCY == 1 + #define BSP_HOCO_HZ (18000000) + #elif BSP_CFG_HOCO_FREQUENCY == 2 + #define BSP_HOCO_HZ (20000000) + #else + #error "Invalid HOCO frequency chosen (BSP_CFG_HOCO_FREQUENCY) in bsp_clock_cfg.h" + #endif -#define BSP_CFG_FLL_ENABLE (0) + #define BSP_CFG_FLL_ENABLE (0) -#define BSP_CORTEX_VECTOR_TABLE_ENTRIES (16U) -#define BSP_VECTOR_TABLE_MAX_ENTRIES (112U) + #define BSP_CORTEX_VECTOR_TABLE_ENTRIES (16U) + #define BSP_VECTOR_TABLE_MAX_ENTRIES (112U) + #define BSP_CFG_INLINE_IRQ_FUNCTIONS (1) -#if defined(_RA_TZ_SECURE) + #if defined(_RA_TZ_SECURE) #define BSP_TZ_SECURE_BUILD (1) #define BSP_TZ_NONSECURE_BUILD (0) #elif defined(_RA_TZ_NONSECURE) #define BSP_TZ_SECURE_BUILD (0) #define BSP_TZ_NONSECURE_BUILD (1) #else -#define BSP_TZ_SECURE_BUILD (0) -#define BSP_TZ_NONSECURE_BUILD (0) -#endif - -/* TrustZone Settings */ -#define BSP_TZ_CFG_INIT_SECURE_ONLY (BSP_CFG_CLOCKS_SECURE || (!BSP_CFG_CLOCKS_OVERRIDE)) -#define BSP_TZ_CFG_SKIP_INIT (BSP_TZ_NONSECURE_BUILD && BSP_TZ_CFG_INIT_SECURE_ONLY) -#define BSP_TZ_CFG_EXCEPTION_RESPONSE (0) - -/* CMSIS TrustZone Settings */ -#define SCB_CSR_AIRCR_INIT (1) -#define SCB_AIRCR_BFHFNMINS_VAL (0) -#define SCB_AIRCR_SYSRESETREQS_VAL (1) -#define SCB_AIRCR_PRIS_VAL (0) -#define TZ_FPU_NS_USAGE (1) + #define BSP_TZ_SECURE_BUILD (0) + #define BSP_TZ_NONSECURE_BUILD (0) + #endif + + /* TrustZone Settings */ + #define BSP_TZ_CFG_INIT_SECURE_ONLY (BSP_CFG_CLOCKS_SECURE || (!BSP_CFG_CLOCKS_OVERRIDE)) + #define BSP_TZ_CFG_SKIP_INIT (BSP_TZ_NONSECURE_BUILD && BSP_TZ_CFG_INIT_SECURE_ONLY) + #define BSP_TZ_CFG_EXCEPTION_RESPONSE (0) + + /* CMSIS TrustZone Settings */ + #define SCB_CSR_AIRCR_INIT (1) + #define SCB_AIRCR_BFHFNMINS_VAL (0) + #define SCB_AIRCR_SYSRESETREQS_VAL (1) + #define SCB_AIRCR_PRIS_VAL (0) + #define TZ_FPU_NS_USAGE (1) #ifndef SCB_NSACR_CP10_11_VAL -#define SCB_NSACR_CP10_11_VAL (3U) + #define SCB_NSACR_CP10_11_VAL (3U) #endif #ifndef FPU_FPCCR_TS_VAL -#define FPU_FPCCR_TS_VAL (1U) + #define FPU_FPCCR_TS_VAL (1U) #endif -#define FPU_FPCCR_CLRONRETS_VAL (1) + #define FPU_FPCCR_CLRONRETS_VAL (1) #ifndef FPU_FPCCR_CLRONRET_VAL -#define FPU_FPCCR_CLRONRET_VAL (1) + #define FPU_FPCCR_CLRONRET_VAL (1) #endif -/* The C-Cache line size that is configured during startup. */ + /* The C-Cache line size that is configured during startup. */ #ifndef BSP_CFG_C_CACHE_LINE_SIZE -#define BSP_CFG_C_CACHE_LINE_SIZE (1U) + #define BSP_CFG_C_CACHE_LINE_SIZE (1U) #endif -/* Type 1 Peripheral Security Attribution */ + /* Type 1 Peripheral Security Attribution */ -/* Peripheral Security Attribution Register (PSAR) Settings */ + /* Peripheral Security Attribution Register (PSAR) Settings */ #ifndef BSP_TZ_CFG_PSARB #define BSP_TZ_CFG_PSARB (\ (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 1) /* CAN1 */ | \ (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 2) /* CAN0 */ | \ (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 8) /* IIC1 */ | \ (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 9) /* IIC0 */ | \ - (((1 > 0) ? 0U : 1U) << 11) /* USBFS */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 11) /* USBFS */ | \ (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 18) /* SPI1 */ | \ (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 19) /* SPI0 */ | \ (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 22) /* SCI9 */ | \ @@ -146,19 +146,19 @@ extern "C" { 0xfffffffc) /* Unused */ #endif -/* Type 2 Peripheral Security Attribution */ + /* Type 2 Peripheral Security Attribution */ -/* Security attribution for Cache registers. */ + /* Security attribution for Cache registers. */ #ifndef BSP_TZ_CFG_CSAR #define BSP_TZ_CFG_CSAR (0xFFFFFFFFU) #endif -/* Security attribution for RSTSRn registers. */ + /* Security attribution for RSTSRn registers. */ #ifndef BSP_TZ_CFG_RSTSAR #define BSP_TZ_CFG_RSTSAR (0xFFFFFFFFU) #endif -/* Security attribution for registers of LVD channels. */ + /* Security attribution for registers of LVD channels. */ #ifndef BSP_TZ_CFG_LVDSAR #define BSP_TZ_CFG_LVDSAR (\ (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 0) | /* LVD Channel 1 */ \ @@ -166,16 +166,16 @@ extern "C" { 0xFFFFFFFCU) #endif -/* Security attribution for LPM registers. */ + /* Security attribution for LPM registers. */ #ifndef BSP_TZ_CFG_LPMSAR #define BSP_TZ_CFG_LPMSAR ((RA_NOT_DEFINED > 0) ? 0xFFFFFCEAU : 0xFFFFFFFFU) #endif -/* Deep Standby Interrupt Factor Security Attribution Register. */ + /* Deep Standby Interrupt Factor Security Attribution Register. */ #ifndef BSP_TZ_CFG_DPFSAR #define BSP_TZ_CFG_DPFSAR ((RA_NOT_DEFINED > 0) ? 0xF2E00000U : 0xFFFFFFFFU) #endif -/* Security attribution for CGC registers. */ + /* Security attribution for CGC registers. */ #ifndef BSP_TZ_CFG_CGFSAR #if BSP_CFG_CLOCKS_SECURE /* Protect all CGC registers from Non-secure write access. */ @@ -186,12 +186,12 @@ extern "C" { #endif #endif -/* Security attribution for Battery Backup registers. */ + /* Security attribution for Battery Backup registers. */ #ifndef BSP_TZ_CFG_BBFSAR #define BSP_TZ_CFG_BBFSAR (0x00FFFFFF) #endif -/* Security attribution for registers for IRQ channels. */ + /* Security attribution for registers for IRQ channels. */ #ifndef BSP_TZ_CFG_ICUSARA #define BSP_TZ_CFG_ICUSARA (\ (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 0U) /* External IRQ0 */ | \ @@ -213,12 +213,12 @@ extern "C" { 0xFFFF0000U) #endif -/* Security attribution for NMI registers. */ + /* Security attribution for NMI registers. */ #ifndef BSP_TZ_CFG_ICUSARB #define BSP_TZ_CFG_ICUSARB (0 | 0xFFFFFFFEU) /* Should match AIRCR.BFHFNMINS. */ #endif -/* Security attribution for registers for DMAC channels */ + /* Security attribution for registers for DMAC channels */ #ifndef BSP_TZ_CFG_ICUSARC #define BSP_TZ_CFG_ICUSARC (\ (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 0U) /* DMAC Channel 0 */ | \ @@ -232,29 +232,29 @@ extern "C" { 0xFFFFFF00U) #endif -/* Security attribution registers for SELSR0. */ + /* Security attribution registers for SELSR0. */ #ifndef BSP_TZ_CFG_ICUSARD #define BSP_TZ_CFG_ICUSARD ((RA_NOT_DEFINED > 0) ? 0xFFFFFFFEU : 0xFFFFFFFFU) #endif -/* Security attribution registers for WUPEN0. */ + /* Security attribution registers for WUPEN0. */ #ifndef BSP_TZ_CFG_ICUSARE #define BSP_TZ_CFG_ICUSARE ((RA_NOT_DEFINED > 0) ? 0x04F2FFFFU : 0xFFFFFFFFU) #endif -/* Security attribution registers for WUPEN1. */ + /* Security attribution registers for WUPEN1. */ #ifndef BSP_TZ_CFG_ICUSARF #define BSP_TZ_CFG_ICUSARF ((RA_NOT_DEFINED > 0) ? 0xFFFFFFF8U : 0xFFFFFFFFU) #endif -/* Set DTCSTSAR if the Secure program uses the DTC. */ + /* Set DTCSTSAR if the Secure program uses the DTC. */ #if RA_NOT_DEFINED == RA_NOT_DEFINED -#define BSP_TZ_CFG_DTC_USED (0U) + #define BSP_TZ_CFG_DTC_USED (0U) #else #define BSP_TZ_CFG_DTC_USED (1U) #endif -/* Security attribution of FLWT and FCKMHZ registers. */ + /* Security attribution of FLWT and FCKMHZ registers. */ #ifndef BSP_TZ_CFG_FSAR /* If the CGC registers are only accessible in Secure mode, than there is no * reason for nonsecure applications to access FLWT and FCKMHZ. */ @@ -267,118 +267,123 @@ extern "C" { #endif #endif -/* Security attribution for SRAM registers. */ + /* Security attribution for SRAM registers. */ #ifndef BSP_TZ_CFG_SRAMSAR /* If the CGC registers are only accessible in Secure mode, than there is no reason for Non Secure applications to access * SRAM0WTEN and therefore there is no reason to access PRCR2. */ -#define BSP_TZ_CFG_SRAMSAR (\ + #define BSP_TZ_CFG_SRAMSAR (\ 1 | \ ((BSP_CFG_CLOCKS_SECURE == 0) ? (1U << 1U) : 0U) | \ 4 | \ 0xFFFFFFF8U) #endif -/* Security attribution for Standby RAM registers. */ + /* Security attribution for Standby RAM registers. */ #ifndef BSP_TZ_CFG_STBRAMSAR -#define BSP_TZ_CFG_STBRAMSAR (0 | 0xFFFFFFF0U) + #define BSP_TZ_CFG_STBRAMSAR (0 | 0xFFFFFFF0U) #endif -/* Security attribution for the DMAC Bus Master MPU settings. */ + /* Security attribution for the DMAC Bus Master MPU settings. */ #ifndef BSP_TZ_CFG_MMPUSARA -/* The DMAC Bus Master MPU settings should align with the DMAC channel settings. */ -#define BSP_TZ_CFG_MMPUSARA (BSP_TZ_CFG_ICUSARC) + /* The DMAC Bus Master MPU settings should align with the DMAC channel settings. */ + #define BSP_TZ_CFG_MMPUSARA (BSP_TZ_CFG_ICUSARC) #endif -/* Security Attribution Register A for BUS Control registers. */ + /* Security Attribution Register A for BUS Control registers. */ #ifndef BSP_TZ_CFG_BUSSARA -#define BSP_TZ_CFG_BUSSARA (0xFFFFFFFFU) + #define BSP_TZ_CFG_BUSSARA (0xFFFFFFFFU) #endif -/* Security Attribution Register B for BUS Control registers. */ + /* Security Attribution Register B for BUS Control registers. */ #ifndef BSP_TZ_CFG_BUSSARB -#define BSP_TZ_CFG_BUSSARB (0xFFFFFFFFU) + #define BSP_TZ_CFG_BUSSARB (0xFFFFFFFFU) #endif -/* Enable Uninitialized Non-Secure Application Fallback. */ + /* Enable Uninitialized Non-Secure Application Fallback. */ #ifndef BSP_TZ_CFG_NON_SECURE_APPLICATION_FALLBACK -#define BSP_TZ_CFG_NON_SECURE_APPLICATION_FALLBACK (1U) + #define BSP_TZ_CFG_NON_SECURE_APPLICATION_FALLBACK (1U) #endif -#define OFS_SEQ1 0xA001A001 | (1 << 1) | (3 << 2) -#define OFS_SEQ2 (15 << 4) | (3 << 8) | (3 << 10) -#define OFS_SEQ3 (1 << 12) | (1 << 14) | (1 << 17) -#define OFS_SEQ4 (3 << 18) |(15 << 20) | (3 << 24) | (3 << 26) -#define OFS_SEQ5 (1 << 28) | (1 << 30) -#define BSP_CFG_ROM_REG_OFS0 (OFS_SEQ1 | OFS_SEQ2 | OFS_SEQ3 | OFS_SEQ4 | OFS_SEQ5) -/* Option Function Select Register 1 Security Attribution */ + #define OFS_SEQ1 0xA001A001 | (1 << 1) | (3 << 2) + #define OFS_SEQ2 (15 << 4) | (3 << 8) | (3 << 10) + #define OFS_SEQ3 (1 << 12) | (1 << 14) | (1 << 17) + #define OFS_SEQ4 (3 << 18) |(15 << 20) | (3 << 24) | (3 << 26) + #define OFS_SEQ5 (1 << 28) | (1 << 30) + #define BSP_CFG_ROM_REG_OFS0 (OFS_SEQ1 | OFS_SEQ2 | OFS_SEQ3 | OFS_SEQ4 | OFS_SEQ5) + + /* Option Function Select Register 1 Security Attribution */ #ifndef BSP_CFG_ROM_REG_OFS1_SEL #if defined(_RA_TZ_SECURE) || defined(_RA_TZ_NONSECURE) - #define BSP_CFG_ROM_REG_OFS1_SEL (0xFFFFF8F8U | ((BSP_CFG_CLOCKS_SECURE == 0) ? 0x700U : 0U) | ((RA_NOT_DEFINED > 0) ? 0U : 0x7U)) + #define BSP_CFG_ROM_REG_OFS1_SEL (0xFFFFF8F8U | ((0U << 0U)) | ((0U << 2U)) | ((BSP_CFG_CLOCKS_SECURE == 0) ? 0x700U : 0U)) #else -#define BSP_CFG_ROM_REG_OFS1_SEL (0xFFFFF8F8U) + #define BSP_CFG_ROM_REG_OFS1_SEL (0xFFFFF8F8U) #endif #endif -#define BSP_CFG_ROM_REG_OFS1 (0xFFFFFEF8 | (1 << 2) | (3) | (1 << 8)) + #define BSP_CFG_ROM_REG_OFS1 (0xFFFFFEF8 | (1 << 2) | (3) | (1 << 8)) -/* Used to create IELS values for the interrupt initialization table g_interrupt_event_link_select. */ -#define BSP_PRV_IELS_ENUM(vector) (ELC_ ## vector) + /* Used to create IELS values for the interrupt initialization table g_interrupt_event_link_select. */ + #define BSP_PRV_IELS_ENUM(vector) (ELC_ ## vector) -/* Dual Mode Select Register */ + /* Dual Mode Select Register */ #ifndef BSP_CFG_ROM_REG_DUALSEL -#define BSP_CFG_ROM_REG_DUALSEL (0xFFFFFFF8U | (0x7U)) + #define BSP_CFG_ROM_REG_DUALSEL (0xFFFFFFF8U | (0x7U)) #endif -/* Block Protection Register 0 */ + /* Block Protection Register 0 */ #ifndef BSP_CFG_ROM_REG_BPS0 -#define BSP_CFG_ROM_REG_BPS0 (~( 0U)) + #define BSP_CFG_ROM_REG_BPS0 (~( 0U)) #endif -/* Block Protection Register 1 */ + /* Block Protection Register 1 */ #ifndef BSP_CFG_ROM_REG_BPS1 -#define BSP_CFG_ROM_REG_BPS1 (~( 0U)) + #define BSP_CFG_ROM_REG_BPS1 (~( 0U)) #endif -/* Block Protection Register 2 */ + /* Block Protection Register 2 */ #ifndef BSP_CFG_ROM_REG_BPS2 -#define BSP_CFG_ROM_REG_BPS2 (~( 0U)) + #define BSP_CFG_ROM_REG_BPS2 (~( 0U)) #endif -/* Block Protection Register 3 */ + /* Block Protection Register 3 */ #ifndef BSP_CFG_ROM_REG_BPS3 -#define BSP_CFG_ROM_REG_BPS3 (0xFFFFFFFFU) + #define BSP_CFG_ROM_REG_BPS3 (0xFFFFFFFFU) #endif -/* Permanent Block Protection Register 0 */ + /* Permanent Block Protection Register 0 */ #ifndef BSP_CFG_ROM_REG_PBPS0 -#define BSP_CFG_ROM_REG_PBPS0 (~( 0U)) + #define BSP_CFG_ROM_REG_PBPS0 (~( 0U)) #endif -/* Permanent Block Protection Register 1 */ + /* Permanent Block Protection Register 1 */ #ifndef BSP_CFG_ROM_REG_PBPS1 -#define BSP_CFG_ROM_REG_PBPS1 (~( 0U)) + #define BSP_CFG_ROM_REG_PBPS1 (~( 0U)) #endif -/* Permanent Block Protection Register 2 */ + /* Permanent Block Protection Register 2 */ #ifndef BSP_CFG_ROM_REG_PBPS2 -#define BSP_CFG_ROM_REG_PBPS2 (~( 0U)) + #define BSP_CFG_ROM_REG_PBPS2 (~( 0U)) #endif -/* Permanent Block Protection Register 3 */ + /* Permanent Block Protection Register 3 */ #ifndef BSP_CFG_ROM_REG_PBPS3 -#define BSP_CFG_ROM_REG_PBPS3 (0xFFFFFFFFU) + #define BSP_CFG_ROM_REG_PBPS3 (0xFFFFFFFFU) #endif -/* Security Attribution for Block Protection Register 0 (If any blocks are marked as protected in the secure application, then mark them as secure) */ + /* Security Attribution for Block Protection Register 0 (If any blocks are marked as protected in the secure application, then mark them as secure) */ #ifndef BSP_CFG_ROM_REG_BPS_SEL0 -#define BSP_CFG_ROM_REG_BPS_SEL0 (BSP_CFG_ROM_REG_BPS0 & BSP_CFG_ROM_REG_PBPS0) + #define BSP_CFG_ROM_REG_BPS_SEL0 (BSP_CFG_ROM_REG_BPS0 & BSP_CFG_ROM_REG_PBPS0) #endif -/* Security Attribution for Block Protection Register 1 (If any blocks are marked as protected in the secure application, then mark them as secure) */ + /* Security Attribution for Block Protection Register 1 (If any blocks are marked as protected in the secure application, then mark them as secure) */ #ifndef BSP_CFG_ROM_REG_BPS_SEL1 -#define BSP_CFG_ROM_REG_BPS_SEL1 (BSP_CFG_ROM_REG_BPS1 & BSP_CFG_ROM_REG_PBPS1) + #define BSP_CFG_ROM_REG_BPS_SEL1 (BSP_CFG_ROM_REG_BPS1 & BSP_CFG_ROM_REG_PBPS1) #endif -/* Security Attribution for Block Protection Register 2 (If any blocks are marked as protected in the secure application, then mark them as secure) */ + /* Security Attribution for Block Protection Register 2 (If any blocks are marked as protected in the secure application, then mark them as secure) */ #ifndef BSP_CFG_ROM_REG_BPS_SEL2 -#define BSP_CFG_ROM_REG_BPS_SEL2 (BSP_CFG_ROM_REG_BPS2 & BSP_CFG_ROM_REG_PBPS2) + #define BSP_CFG_ROM_REG_BPS_SEL2 (BSP_CFG_ROM_REG_BPS2 & BSP_CFG_ROM_REG_PBPS2) #endif -/* Security Attribution for Block Protection Register 3 (If any blocks are marked as protected in the secure application, then mark them as secure) */ + /* Security Attribution for Block Protection Register 3 (If any blocks are marked as protected in the secure application, then mark them as secure) */ #ifndef BSP_CFG_ROM_REG_BPS_SEL3 -#define BSP_CFG_ROM_REG_BPS_SEL3 (BSP_CFG_ROM_REG_BPS3 & BSP_CFG_ROM_REG_PBPS3) + #define BSP_CFG_ROM_REG_BPS_SEL3 (BSP_CFG_ROM_REG_BPS3 & BSP_CFG_ROM_REG_PBPS3) +#endif + /* Security Attribution for Bank Select Register */ +#ifndef BSP_CFG_ROM_REG_BANKSEL_SEL + #define BSP_CFG_ROM_REG_BANKSEL_SEL (0xFFFFFFFFU) #endif #ifndef BSP_CLOCK_CFG_MAIN_OSC_WAIT -#define BSP_CLOCK_CFG_MAIN_OSC_WAIT (9) + #define BSP_CLOCK_CFG_MAIN_OSC_WAIT (9) #endif #ifdef __cplusplus diff --git a/hw/bsp/ra/boards/ra6m5_ek/script/fsp.ld b/hw/bsp/ra/boards/ra6m5_ek/script/fsp.ld new file mode 100644 index 000000000..627ffe4d9 --- /dev/null +++ b/hw/bsp/ra/boards/ra6m5_ek/script/fsp.ld @@ -0,0 +1,766 @@ +/* + Linker File for Renesas FSP +*/ + +INCLUDE memory_regions.ld + +/* Uncomment and set XIP_SECONDARY_SLOT_IMAGE to 1 below for the secondary XIP application image.*/ +/* + XIP_SECONDARY_SLOT_IMAGE = 1; +*/ + +QSPI_FLASH_PRV_LENGTH = DEFINED(QSPI_FLASH_SIZE) ? ABSOLUTE(QSPI_FLASH_SIZE) : ABSOLUTE(QSPI_FLASH_LENGTH); +OSPI_DEVICE_0_PRV_LENGTH = DEFINED(OSPI_DEVICE_0_SIZE) ? ABSOLUTE(OSPI_DEVICE_0_SIZE) : ABSOLUTE(OSPI_DEVICE_0_LENGTH); +OSPI_DEVICE_1_PRV_LENGTH = DEFINED(OSPI_DEVICE_1_SIZE) ? ABSOLUTE(OSPI_DEVICE_1_SIZE) : ABSOLUTE(OSPI_DEVICE_1_LENGTH); + +/* If a flat (secure) project has DEFINED RAM_NS_BUFFER_LENGTH, then emit IDAU symbols to allocate non-secure RAM. */ +__RESERVE_NS_RAM = !DEFINED(PROJECT_NONSECURE) && DEFINED(RAM_NS_BUFFER_LENGTH) && (OPTION_SETTING_S_LENGTH != 0); + +ITCM_START = DEFINED(ITCM_START)? ITCM_START : 0; +ITCM_LENGTH = DEFINED(ITCM_LENGTH)? ITCM_LENGTH : 0; +DTCM_START = DEFINED(DTCM_START)? DTCM_START : 0; +DTCM_LENGTH = DEFINED(DTCM_LENGTH)? DTCM_LENGTH : 0; +RAM_NS_BUFFER_BLOCK_LENGTH = DEFINED(RAM_NS_BUFFER_LENGTH) ? ALIGN(RAM_NS_BUFFER_LENGTH, 8192) : 0; +RAM_NS_BUFFER_LENGTH = DEFINED(RAM_NS_BUFFER_LENGTH) ? RAM_NS_BUFFER_LENGTH : 0; +RAM_NS_BUFFER_START = RAM_START + RAM_LENGTH - RAM_NS_BUFFER_LENGTH; +RAM_NS_BUFFER_BLOCK_START = RAM_START + RAM_LENGTH - RAM_NS_BUFFER_BLOCK_LENGTH; + +OPTION_SETTING_START_NS = DEFINED(PROJECT_NONSECURE) ? OPTION_SETTING_START : OPTION_SETTING_START + 0x80; + +/* This definition is used to avoid moving the counter in OPTION_SETTING regions for projects that should not configure option settings. + * Bootloader images do not configure option settings because they are owned by the bootloader. + * FSP_BOOTABLE_IMAGE is only defined in bootloader images. */ +__bl_FSP_BOOTABLE_IMAGE = 1; +__bln_FSP_BOOTABLE_IMAGE = 1; +PROJECT_SECURE_OR_FLAT = (!DEFINED(PROJECT_NONSECURE) || DEFINED(PROJECT_SECURE)) && OPTION_SETTING_LENGTH && !DEFINED(FSP_BOOTABLE_IMAGE); +USE_OPTION_SETTING_NS = DEFINED(PROJECT_NONSECURE) && !DEFINED(FSP_BOOTABLE_IMAGE); + +__bl_FLASH_IMAGE_START = !DEFINED(FLASH_BOOTLOADER_LENGTH) ? 0 : + FLASH_APPLICATION_IMAGE_NUMBER == 1 ? FLASH_START + FLASH_BOOTLOADER_LENGTH + FLASH_BOOTLOADER_HEADER_LENGTH : + (DEFINED(BOOTLOADER_SECONDARY_USE_QSPI) || DEFINED(BOOTLOADER_SECONDARY_USE_OSPI_B)) ? FLASH_START + FLASH_BOOTLOADER_LENGTH + FLASH_BOOTLOADER_SCRATCH_LENGTH + FLASH_BOOTLOADER_HEADER_LENGTH : + FLASH_START + FLASH_BOOTLOADER_LENGTH + FLASH_BOOTLOADER_SCRATCH_LENGTH + FLASH_APPLICATION_S_LENGTH + FLASH_BOOTLOADER_HEADER_LENGTH; +__bl_FLASH_IMAGE_LENGTH = !DEFINED(FLASH_BOOTLOADER_LENGTH) ? 0 : + FLASH_APPLICATION_S_LENGTH - FLASH_BOOTLOADER_HEADER_LENGTH; +__bl_FLASH_IMAGE_END = __bl_FLASH_IMAGE_START + __bl_FLASH_IMAGE_LENGTH; +__bl_XIP_SECONDARY_FLASH_IMAGE_START = !DEFINED(FLASH_BOOTLOADER_LENGTH) ? 0 : + FLASH_START + FLASH_BOOTLOADER_LENGTH + FLASH_APPLICATION_S_LENGTH + FLASH_BOOTLOADER_HEADER_LENGTH; +__bl_XIP_SECONDARY_FLASH_IMAGE_END = __bl_XIP_SECONDARY_FLASH_IMAGE_START + __bl_FLASH_IMAGE_LENGTH; +__bl_FLASH_NS_START = !DEFINED(FLASH_BOOTLOADER_LENGTH) ? 0 : + FLASH_APPLICATION_NS_LENGTH == 0 ? __bl_FLASH_IMAGE_END : + __bl_FLASH_IMAGE_START - FLASH_BOOTLOADER_HEADER_LENGTH + FLASH_APPLICATION_S_LENGTH; +__bl_FLASH_NSC_START = !DEFINED(FLASH_BOOTLOADER_LENGTH) ? 0 : + FLASH_APPLICATION_NS_LENGTH == 0 ? __bl_FLASH_IMAGE_END : + __bl_FLASH_IMAGE_END - FLASH_APPLICATION_NSC_LENGTH; +__bl_RAM_NS_START = !DEFINED(FLASH_BOOTLOADER_LENGTH) ? 0 : + FLASH_APPLICATION_NS_LENGTH == 0 ? RAM_START + RAM_LENGTH : + RAM_START + RAM_LENGTH - RAM_APPLICATION_NS_LENGTH; +__bl_RAM_NSC_START = !DEFINED(FLASH_BOOTLOADER_LENGTH) ? 0 : + FLASH_APPLICATION_NS_LENGTH == 0 ? RAM_START + RAM_LENGTH : + __bl_RAM_NS_START - RAM_APPLICATION_NSC_LENGTH; +__bl_FLASH_NS_IMAGE_START = !DEFINED(FLASH_BOOTLOADER_LENGTH) ? 0 : + FLASH_APPLICATION_NS_LENGTH == 0 ? __bl_FLASH_IMAGE_END : + __bl_FLASH_NS_START + FLASH_BOOTLOADER_HEADER_LENGTH_2; +__bln_FLASH_IMAGE_START = __bl_FLASH_NS_IMAGE_START | (!DEFINED (NS_OFFSET_START) ? 0 : NS_OFFSET_START); +__bln_FLASH_IMAGE_LENGTH = !DEFINED(FLASH_BOOTLOADER_LENGTH) ? 0 : + FLASH_APPLICATION_NS_LENGTH == 0 ? __bl_FLASH_IMAGE_END : + FLASH_APPLICATION_NS_LENGTH - FLASH_BOOTLOADER_HEADER_LENGTH_2; + +XIP_SECONDARY_SLOT_IMAGE = DEFINED(XIP_SECONDARY_SLOT_IMAGE) ? XIP_SECONDARY_SLOT_IMAGE : 0; +FLASH_ORIGIN = !DEFINED(FLASH_IMAGE_START) ? FLASH_START : + XIP_SECONDARY_SLOT_IMAGE == 1 ? XIP_SECONDARY_FLASH_IMAGE_START : + FLASH_IMAGE_START; +LIMITED_FLASH_LENGTH = DEFINED(FLASH_IMAGE_LENGTH) ? FLASH_IMAGE_LENGTH : + DEFINED(FLASH_BOOTLOADER_LENGTH) ? FLASH_BOOTLOADER_LENGTH : + FLASH_LENGTH; +OPTION_SETTING_SAS_SIZE = 0x34; +OPTION_SETTING_SAS_LENGTH = !DEFINED(OPTION_SETTING_LENGTH) ? 0 : + OPTION_SETTING_LENGTH == 0 ? 0 : + OPTION_SETTING_LENGTH - OPTION_SETTING_SAS_SIZE; + +/* Define memory regions. */ +MEMORY +{ + ITCM (rx) : ORIGIN = ITCM_START, LENGTH = ITCM_LENGTH + DTCM (rwx) : ORIGIN = DTCM_START, LENGTH = DTCM_LENGTH + FLASH (rx) : ORIGIN = FLASH_ORIGIN, LENGTH = LIMITED_FLASH_LENGTH + RAM (rwx) : ORIGIN = RAM_START, LENGTH = RAM_LENGTH + DATA_FLASH (rx) : ORIGIN = DATA_FLASH_START, LENGTH = DATA_FLASH_LENGTH + QSPI_FLASH (rx) : ORIGIN = QSPI_FLASH_START, LENGTH = QSPI_FLASH_PRV_LENGTH + OSPI_DEVICE_0 (rx) : ORIGIN = OSPI_DEVICE_0_START, LENGTH = OSPI_DEVICE_0_PRV_LENGTH + OSPI_DEVICE_1 (rx) : ORIGIN = OSPI_DEVICE_1_START, LENGTH = OSPI_DEVICE_1_PRV_LENGTH + OSPI_DEVICE_0_RAM (rwx) : ORIGIN = OSPI_DEVICE_0_START, LENGTH = OSPI_DEVICE_0_PRV_LENGTH + OSPI_DEVICE_1_RAM (rwx) : ORIGIN = OSPI_DEVICE_1_START, LENGTH = OSPI_DEVICE_1_PRV_LENGTH + SDRAM (rwx) : ORIGIN = SDRAM_START, LENGTH = SDRAM_LENGTH + OPTION_SETTING (r) : ORIGIN = OPTION_SETTING_START, LENGTH = OPTION_SETTING_LENGTH + OPTION_SETTING_OFS (r) : ORIGIN = OPTION_SETTING_START, LENGTH = 0x18 + OPTION_SETTING_SAS (r) : ORIGIN = OPTION_SETTING_START + OPTION_SETTING_SAS_SIZE, LENGTH = OPTION_SETTING_SAS_LENGTH + OPTION_SETTING_S (r) : ORIGIN = OPTION_SETTING_S_START, LENGTH = OPTION_SETTING_S_LENGTH + ID_CODE (rx) : ORIGIN = ID_CODE_START, LENGTH = ID_CODE_LENGTH +} + +/* Library configurations */ +GROUP(libgcc.a libc.a libm.a) + +/* Linker script to place sections and symbol values. Should be used together + * with other linker script that defines memory regions FLASH and RAM. + * It references following symbols, which must be DEFINED in code: + * Reset_Handler : Entry of reset handler + * + * It defines following symbols, which code can use without definition: + * __exidx_start + * __exidx_end + * __copy_table_start__ + * __copy_table_end__ + * __zero_table_start__ + * __zero_table_end__ + * __etext + * __data_start__ + * __preinit_array_start + * __preinit_array_end + * __init_array_start + * __init_array_end + * __fini_array_start + * __fini_array_end + * __data_end__ + * __bss_start__ + * __bss_end__ + * __HeapLimit + * __StackLimit + * __StackTop + * __stack + * __Vectors_End + * __Vectors_Size + * __qspi_flash_start__ + * __qspi_flash_end__ + * __qspi_flash_code_size__ + * __qspi_region_max_size__ + * __qspi_region_start_address__ + * __qspi_region_end_address__ + * __ospi_device_0_start__ + * __ospi_device_0_end__ + * __ospi_device_0_code_size__ + * __ospi_device_0_region_max_size__ + * __ospi_device_0_region_start_address__ + * __ospi_device_0_region_end_address__ + * __ospi_device_1_start__ + * __ospi_device_1_end__ + * __ospi_device_1_code_size__ + * __ospi_device_1_region_max_size__ + * __ospi_device_1_region_start_address__ + * __ospi_device_1_region_end_address__ + */ +ENTRY(Reset_Handler) + +SECTIONS +{ + .text : + { + __tz_FLASH_S = ABSOLUTE(FLASH_START); + __ROM_Start = .; + + /* Even though the vector table is not 256 entries (1KB) long, we still allocate that much + * space because ROM registers are at address 0x400 and there is very little space + * in between. */ + KEEP(*(.fixed_vectors*)) + KEEP(*(.application_vectors*)) + __Vectors_End = .; + + /* Some devices have a gap of code flash between the vector table and ROM Registers. + * The flash gap section allows applications to place code and data in this section. */ + *(.flash_gap*) + + /* ROM Registers start at address 0x00000400 for devices that do not have the OPTION_SETTING region. */ + . = OPTION_SETTING_LENGTH > 0 ? . : __ROM_Start + 0x400; + KEEP(*(.rom_registers*)) + + /* Allocate flash write-boundary-aligned + * space for sce9 wrapped public keys for mcuboot if the module is used. + */ + KEEP(*(.mcuboot_sce9_key*)) + + *(.text*) + + KEEP(*(.version)) + KEEP(*(.init)) + KEEP(*(.fini)) + + /* .ctors */ + *crtbegin.o(.ctors) + *crtbegin?.o(.ctors) + *(EXCLUDE_FILE(*crtend?.o *crtend.o) .ctors) + *(SORT(.ctors.*)) + *(.ctors) + + /* .dtors */ + *crtbegin.o(.dtors) + *crtbegin?.o(.dtors) + *(EXCLUDE_FILE(*crtend?.o *crtend.o) .dtors) + *(SORT(.dtors.*)) + *(.dtors) + + *(.rodata*) + __usb_dev_descriptor_start_fs = .; + KEEP(*(.usb_device_desc_fs*)) + __usb_cfg_descriptor_start_fs = .; + KEEP(*(.usb_config_desc_fs*)) + __usb_interface_descriptor_start_fs = .; + KEEP(*(.usb_interface_desc_fs*)) + __usb_descriptor_end_fs = .; + __usb_dev_descriptor_start_hs = .; + KEEP(*(.usb_device_desc_hs*)) + __usb_cfg_descriptor_start_hs = .; + KEEP(*(.usb_config_desc_hs*)) + __usb_interface_descriptor_start_hs = .; + KEEP(*(.usb_interface_desc_hs*)) + __usb_descriptor_end_hs = .; + + KEEP(*(.eh_frame*)) + + __ROM_End = .; + } > FLASH = 0xFF + + __Vectors_Size = __Vectors_End - __Vectors; + + . = .; + __itcm_data_pre_location = .; + + /* Initialized ITCM data. */ + /* Aligned to FCACHE2 for RA8. */ + .itcm_data : ALIGN(16) + { + /* Start of ITCM Secure Trustzone region. */ + __tz_ITCM_S = ABSOLUTE(ITCM_START); + + /* All ITCM data start */ + __itcm_data_start = .; + + KEEP(*(.itcm_data*)) + + /* Pad to eight byte alignment in case of ECC initialization. Fill zero. */ + . = ALIGN(8); + + /* All ITCM data end */ + __itcm_data_end = .; + + /* + * Start of the ITCM Non-Secure Trustzone region. + * ITCM_NS_START can be used to set a fixed address for non-secure ITCM in secure projects or flat projects. + */ + __tz_ITCM_N = DEFINED(ITCM_NS_START) ? ABSOLUTE(ITCM_NS_START) : ALIGN(__itcm_data_end, 8192); + } > ITCM AT > FLASH = 0x00 + + /* Addresses exported for ITCM initialization. */ + __itcm_data_init_start = LOADADDR(.itcm_data); + __itcm_data_init_end = LOADADDR(.itcm_data) + SIZEOF(.itcm_data); + + ASSERT(ORIGIN(ITCM) % 8 == 0, "ITCM memory region origin must be aligned to 8 bytes.") + ASSERT(LENGTH(ITCM) % 8 == 0, "ITCM memory region length must be a multiple of 8 bytes.") + ASSERT(LOADADDR(.itcm_data) % 16 == 0, ".itcm_data section must be aligned to 16 bytes.") + ASSERT(SIZEOF(.itcm_data) % 8 == 0, ".itcm_data section size must be a multiple of 8 bytes.") + + /* Restore location counter. */ + /* If ITCM is not present, this will be the address stored in '.' before ALIGN was attempted. */ + /* If ITCM is present, this will be the absolute address that follows the ITCM ROM location. */ + . = (SIZEOF(.itcm_data) > 0) ? __itcm_data_init_end : __itcm_data_pre_location; + + __exidx_start = .; + /DISCARD/ : + { + *(.ARM.extab* .gnu.linkonce.armextab.*) + *(.ARM.exidx* .gnu.linkonce.armexidx.*) + } + __exidx_end = .; + + /* To copy multiple ROM to RAM sections, + * uncomment .copy.table section and, + * define __STARTUP_COPY_MULTIPLE in startup_ARMCMx.S */ + /* + .copy.table : + { + . = ALIGN(4); + __copy_table_start__ = .; + LONG (__etext) + LONG (__data_start__) + LONG (__data_end__ - __data_start__) + LONG (__etext2) + LONG (__data2_start__) + LONG (__data2_end__ - __data2_start__) + __copy_table_end__ = .; + } > FLASH + */ + + /* To clear multiple BSS sections, + * uncomment .zero.table section and, + * define __STARTUP_CLEAR_BSS_MULTIPLE in startup_ARMCMx.S */ + /* + .zero.table : + { + . = ALIGN(4); + __zero_table_start__ = .; + LONG (__bss_start__) + LONG (__bss_end__ - __bss_start__) + LONG (__bss2_start__) + LONG (__bss2_end__ - __bss2_start__) + __zero_table_end__ = .; + } > FLASH + */ + + __etext = .; + + __tz_RAM_S = ORIGIN(RAM); + + /* If DTC is used, put the DTC vector table at the start of SRAM. + This avoids memory holes due to 1K alignment required by it. */ + .fsp_dtc_vector_table (NOLOAD) : + { + . = ORIGIN(RAM); + *(.fsp_dtc_vector_table) + } > RAM + + /* Initialized data section. */ + .data : + { + __data_start__ = .; + . = ALIGN(4); + + __Code_In_RAM_Start = .; + + KEEP(*(.code_in_ram*)) + __Code_In_RAM_End = .; + + *(vtable) + /* Don't use *(.data*) because it will place data meant for .data_flash in this section. */ + *(.data.*) + *(.data) + + . = ALIGN(4); + /* preinit data */ + PROVIDE_HIDDEN (__preinit_array_start = .); + KEEP(*(.preinit_array)) + PROVIDE_HIDDEN (__preinit_array_end = .); + + . = ALIGN(4); + /* init data */ + PROVIDE_HIDDEN (__init_array_start = .); + KEEP(*(SORT(.init_array.*))) + KEEP(*(.init_array)) + PROVIDE_HIDDEN (__init_array_end = .); + + + . = ALIGN(4); + /* finit data */ + PROVIDE_HIDDEN (__fini_array_start = .); + KEEP(*(SORT(.fini_array.*))) + KEEP(*(.fini_array)) + PROVIDE_HIDDEN (__fini_array_end = .); + + KEEP(*(.jcr*)) + + . = ALIGN(4); + + /* All data end */ + __data_end__ = .; + + } > RAM AT > FLASH + + . = .; + __dtcm_data_pre_location = LOADADDR(.data) + SIZEOF(.data); + + /* Initialized DTCM data. */ + /* Aligned to FCACHE2 for RA8. */ + .dtcm_data : ALIGN(16) + { + /* Start of DTCM Secure Trustzone region. */ + __tz_DTCM_S = ABSOLUTE(DTCM_START); + + /* Initialized DTCM data start */ + __dtcm_data_start = .; + + KEEP(*(.dtcm_data*)) + + /* Pad to eight byte alignment in case of ECC initialization. Fill zero. */ + . = ALIGN(8); + + /* Initialized DTCM data end */ + __dtcm_data_end = .; + } > DTCM AT > FLASH = 0x00 + + . = __dtcm_data_end; + /* Uninitialized DTCM data. */ + /* ALIGN appears on the left side of the colon because it is being used to assign the VMA directly, as opposed to a right side appearance which would control the LMA. */ + .dtcm_bss ALIGN(8) (NOLOAD) : + { + /* Uninitialized DTCM data start */ + __dtcm_bss_start = .; + + KEEP(*(.dtcm_bss*)) + + /* Pad to eight byte alignment in case of ECC initialization. No fill because of NOLOAD. */ + . = ALIGN(8); + + /* Uninitialized DTCM data end */ + __dtcm_bss_end = .; + + /* + * Start of the DTCM Non-Secure Trustzone region. + * DTCM_NS_START can be used to set a fixed address for non-secure DTCM in secure projects or flat projects. + */ + __tz_DTCM_N = DEFINED(DTCM_NS_START) ? ABSOLUTE(DTCM_NS_START) : ALIGN(__dtcm_bss_end, 8192); + } > DTCM + + /* Addresses exported for DTCM initialization. */ + __dtcm_data_init_start = LOADADDR(.dtcm_data); + __dtcm_data_init_end = LOADADDR(.dtcm_data) + SIZEOF(.dtcm_data); + + ASSERT(ORIGIN(DTCM) % 8 == 0, "DTCM memory region origin must be aligned to 8 bytes.") + ASSERT(LENGTH(DTCM) % 8 == 0, "DTCM memory region length must be a multiple of 8 bytes.") + ASSERT(LOADADDR(.dtcm_bss) == ADDR(.dtcm_bss), ".dtcm_bss has (VMA != LMA) but should be NOLOAD (VMA == LMA).") + ASSERT(LOADADDR(.dtcm_data) % 16 == 0, ".dtcm_data section must be aligned to 16 bytes.") + ASSERT(SIZEOF(.dtcm_data) % 8 == 0, ".dtcm_data section size must be a multiple of 8 bytes.") + ASSERT(LOADADDR(.dtcm_bss) % 8 == 0, ".dtcm_bss section must be aligned to 8 bytes.") + ASSERT(SIZEOF(.dtcm_bss) % 8 == 0, ".dtcm_bss section size must be a multiple of 8 bytes.") + ASSERT(__dtcm_bss_start == __dtcm_data_end, ".dtcm_bss section is not adjacent to .dtcm_data section.") + + /* Restore location counter. */ + /* If DTCM is not present, this will be the address stored in '.' before ALIGN was attempted. */ + /* If DTCM is present, this will be the absolute address that follows the DTCM ROM location. */ + . = (SIZEOF(.dtcm_data) > 0) ? __dtcm_data_init_end : __dtcm_data_pre_location; + + /* TrustZone Secure Gateway Stubs Section */ + + /* Store location counter for SPI non-retentive sections. */ + sgstubs_pre_location = .; + + /* Determine the secure gateway stubs address either by the provided linker variable or the next 1024-byte block. */ + SGSTUBS_LOC = (DEFINED(PROJECT_SECURE) && DEFINED(FLASH_NSC_START)) ? ABSOLUTE(FLASH_NSC_START) : ALIGN(1024); + .gnu.sgstubs SGSTUBS_LOC : ALIGN(1024) + { + __tz_FLASH_C = DEFINED(FLASH_NSC_START) ? ABSOLUTE(FLASH_NSC_START) : __RESERVE_NS_RAM ? ABSOLUTE(FLASH_START + FLASH_LENGTH) : ALIGN(1024); + _start_sg = .; + *(.gnu.sgstubs*) + . = ALIGN(32); + _end_sg = .; + } > FLASH + + __tz_FLASH_N = DEFINED(FLASH_NS_START) ? ABSOLUTE(FLASH_NS_START) : __RESERVE_NS_RAM ? ABSOLUTE(FLASH_START + FLASH_LENGTH) : FLASH_LENGTH < 32768 ? FLASH_LENGTH : ALIGN(32768); + FLASH_NS_IMAGE_START = DEFINED(FLASH_NS_IMAGE_START) ? FLASH_NS_IMAGE_START : __tz_FLASH_N; + + /* Note: There are no secure/non-secure boundaries for QSPI. These symbols are provided for the RA configuration tool. */ + __tz_QSPI_FLASH_S = ORIGIN(QSPI_FLASH); + + /* QSPI_FLASH section to be downloaded via debugger */ + .qspi_flash : + { + __qspi_flash_start__ = .; + KEEP(*(.qspi_flash*)) + KEEP(*(.code_in_qspi*)) + __qspi_flash_end__ = .; + } > QSPI_FLASH + __qspi_flash_code_size__ = __qspi_flash_end__ - __qspi_flash_start__; + + /* QSPI_FLASH non-retentive section, creates a copy in internal flash that can be copied to QSPI */ + __qspi_flash_code_addr__ = sgstubs_pre_location; + .qspi_non_retentive : AT(__qspi_flash_code_addr__) + { + __qspi_non_retentive_start__ = .; + KEEP(*(.qspi_non_retentive*)) + __qspi_non_retentive_end__ = .; + } > QSPI_FLASH + __qspi_non_retentive_size__ = __qspi_non_retentive_end__ - __qspi_non_retentive_start__; + + __qspi_region_max_size__ = 0x4000000; /* Must be the same as defined in MEMORY above */ + __qspi_region_start_address__ = __qspi_flash_start__; + __qspi_region_end_address__ = __qspi_flash_start__ + __qspi_region_max_size__; + + /* Note: There are no secure/non-secure boundaries for QSPI. These symbols are provided for the RA configuration tool. */ + __tz_QSPI_FLASH_N = __qspi_non_retentive_end__; + + /* Support for OctaRAM */ + .OSPI_DEVICE_0_NO_LOAD (NOLOAD): + { + . = ALIGN(4); + __ospi_device_0_start__ = .; + *(.ospi_device_0_no_load*) + . = ALIGN(4); + __ospi_device_0_end__ = .; + } > OSPI_DEVICE_0_RAM + + .OSPI_DEVICE_1_NO_LOAD (NOLOAD): + { + . = ALIGN(4); + __ospi_device_1_start__ = .; + *(.ospi_device_1_no_load*) + . = ALIGN(4); + __ospi_device_1_end__ = .; + } > OSPI_DEVICE_1_RAM + + /* Note: There are no secure/non-secure boundaries for QSPI. These symbols are provided for the RA configuration tool. */ + __tz_OSPI_DEVICE_0_S = ORIGIN(OSPI_DEVICE_0); + + /* OSPI_DEVICE_0 section to be downloaded via debugger */ + .OSPI_DEVICE_0 : + { + __ospi_device_0_start__ = .; + KEEP(*(.ospi_device_0*)) + KEEP(*(.code_in_ospi_device_0*)) + __ospi_device_0_end__ = .; + } > OSPI_DEVICE_0 + __ospi_device_0_code_size__ = __ospi_device_0_end__ - __ospi_device_0_start__; + + /* OSPI_DEVICE_0 non-retentive section, creates a copy in internal flash that can be copied to OSPI */ + __ospi_device_0_code_addr__ = sgstubs_pre_location + (SIZEOF(.qspi_non_retentive)); + .ospi_device_0_non_retentive : AT(__ospi_device_0_code_addr__) + { + __ospi_device_0_non_retentive_start__ = .; + KEEP(*(.ospi_device_0_non_retentive*)) + __ospi_device_0_non_retentive_end__ = .; + } > OSPI_DEVICE_0 + __ospi_device_0_non_retentive_size__ = __ospi_device_0_non_retentive_end__ - __ospi_device_0_non_retentive_start__; + + __ospi_device_0_region_max_size__ = 0x8000000; /* Must be the same as defined in MEMORY above */ + __ospi_device_0_region_start_address__ = __ospi_device_0_start__; + __ospi_device_0_region_end_address__ = __ospi_device_0_start__ + __ospi_device_0_region_max_size__; + + /* Note: There are no secure/non-secure boundaries for OSPI. These symbols are provided for the RA configuration tool. */ + __tz_OSPI_DEVICE_0_N = __ospi_device_0_non_retentive_end__; + + /* Note: There are no secure/non-secure boundaries for OSPI. These symbols are provided for the RA configuration tool. */ + __tz_OSPI_DEVICE_1_S = ORIGIN(OSPI_DEVICE_1); + + /* OSPI_DEVICE_1 section to be downloaded via debugger */ + .OSPI_DEVICE_1 : + { + __ospi_device_1_start__ = .; + KEEP(*(.ospi_device_1*)) + KEEP(*(.code_in_ospi_device_1*)) + __ospi_device_1_end__ = .; + } > OSPI_DEVICE_1 + __ospi_device_1_code_size__ = __ospi_device_1_end__ - __ospi_device_1_start__; + + /* OSPI_DEVICE_1 non-retentive section, creates a copy in internal flash that can be copied to OSPI */ + __ospi_device_1_code_addr__ = sgstubs_pre_location + (SIZEOF(.qspi_non_retentive) + SIZEOF(.ospi_device_0_non_retentive)); + .ospi_device_1_non_retentive : AT(__ospi_device_1_code_addr__) + { + __ospi_device_1_non_retentive_start__ = .; + KEEP(*(.ospi_device_1_non_retentive*)) + __ospi_device_1_non_retentive_end__ = .; + } > OSPI_DEVICE_1 + __ospi_device_1_non_retentive_size__ = __ospi_device_1_non_retentive_end__ - __ospi_device_1_non_retentive_start__; + + __ospi_device_1_region_max_size__ = 0x10000000; /* Must be the same as defined in MEMORY above */ + __ospi_device_1_region_start_address__ = __ospi_device_1_start__; + __ospi_device_1_region_end_address__ = __ospi_device_1_start__ + __ospi_device_1_region_max_size__; + + /* Note: There are no secure/non-secure boundaries for OSPI. These symbols are provided for the RA configuration tool. */ + __tz_OSPI_DEVICE_1_N = __ospi_device_1_non_retentive_end__; + + .noinit (NOLOAD): + { + . = ALIGN(4); + __noinit_start = .; + KEEP(*(.noinit*)) + . = ALIGN(8); + /* Place the FreeRTOS heap here so that the __HeapLimit calculation does not include the freertos heap. */ + KEEP(*(.heap.*)) + __noinit_end = .; + } > RAM + + .bss : + { + . = ALIGN(4); + __bss_start__ = .; + *(.bss*) + *(COMMON) + . = ALIGN(4); + __bss_end__ = .; + } > RAM + + .heap (NOLOAD): + { + . = ALIGN(8); + __HeapBase = .; + /* Place the STD heap here. */ + KEEP(*(.heap)) + __HeapLimit = .; + } > RAM + + /* Stacks are stored in this section. */ + .stack_dummy (NOLOAD): + { + . = ALIGN(8); + __StackLimit = .; + /* Main stack */ + KEEP(*(.stack)) + __StackTop = .; + /* Thread stacks */ + KEEP(*(.stack*)) + __StackTopAll = .; + } > RAM + + PROVIDE(__stack = __StackTopAll); + + /* This symbol represents the end of user allocated RAM. The RAM after this symbol can be used + at run time for things such as ThreadX memory pool allocations. */ + __RAM_segment_used_end__ = ALIGN(__StackTopAll , 4); + + /* RAM_NSC_START can be used to set a fixed address for non-secure callable RAM in secure projects. + * If it is not specified, the address for NSC RAM is the end of RAM aligned to a 1K boundary. + * In flat projects that require non-secure RAM, this variable is set to the start of non-secure RAM. */ + __tz_RAM_C = DEFINED(RAM_NSC_START) ? ABSOLUTE(RAM_NSC_START - RAM_NS_BUFFER_BLOCK_LENGTH) : __RESERVE_NS_RAM ? ABSOLUTE(RAM_NS_BUFFER_BLOCK_START) : ALIGN(__RAM_segment_used_end__, 1024); + + /* RAM_NS_START can be used to set a fixed address for non-secure RAM in secure projects or flat projects. + * RAM_NS_BUFFER_BLOCK_LENGTH is used to allocate non-secure buffers in a flat project. If it is not + * specified, the address for NSC RAM is the end of RAM aligned to an 8K boundary. + * In flat projects that require non-secure RAM, this variable is set to the start of non-secure RAM. */ + __tz_RAM_N = DEFINED(RAM_NS_START) ? ABSOLUTE(RAM_NS_START - RAM_NS_BUFFER_BLOCK_LENGTH) : __RESERVE_NS_RAM ? ABSOLUTE(RAM_NS_BUFFER_BLOCK_START) : ALIGN(__tz_RAM_C, 8192); + + /* Non-secure buffers must be in non-secure RAM. This is primarily used for the EDMAC in flat projects. + * The EDMAC is a non-secure bus master and can only access non-secure RAM. */ + .ns_buffer (NOLOAD): + { + /* Allocate RAM on a 32-byte boundary to help with placement of Ethernet buffers. */ + . = __RESERVE_NS_RAM ? ABSOLUTE(RAM_NS_BUFFER_START & 0xFFFFFFE0) : .; + + KEEP(*(.ns_buffer*)) + } > RAM + + /* Data flash. */ + .data_flash : + { + . = ORIGIN(DATA_FLASH); + __tz_DATA_FLASH_S = .; + __Data_Flash_Start = .; + KEEP(*(.data_flash*)) + __Data_Flash_End = .; + + __tz_DATA_FLASH_N = DEFINED(DATA_FLASH_NS_START) ? ABSOLUTE(DATA_FLASH_NS_START) : __RESERVE_NS_RAM ? ABSOLUTE(DATA_FLASH_START + DATA_FLASH_LENGTH) : ALIGN(1024); + } > DATA_FLASH + + /* Note: There are no secure/non-secure boundaries for SDRAM. These symbols are provided for the RA configuration tool. */ + __tz_SDRAM_S = ORIGIN(SDRAM); + + /* SDRAM */ + .sdram (NOLOAD): + { + __SDRAM_Start = .; + KEEP(*(.sdram*)) + KEEP(*(.frame*)) + __SDRAM_End = .; + } > SDRAM + + /* Note: There are no secure/non-secure boundaries for SDRAM. These symbols are provided for the RA configuration tool. */ + __tz_SDRAM_N = __SDRAM_End; + + /* Note: There are no secure/non-secure boundaries for ID_CODE. These symbols are provided for the RA configuration tool. */ + __tz_ID_CODE_S = ORIGIN(ID_CODE); + + /* Note: There are no secure/non-secure boundaries for ID_CODE. These symbols are provided for the RA configuration tool. + * Set this symbol to the same value as __tz_ID_CODE_S so the RA configuration tool does not split the ID_CODE + * memory region between TrustZone projects. */ + __tz_ID_CODE_N = __tz_ID_CODE_S; + + .id_code : + { + __ID_Code_Start = .; + KEEP(*(.id_code*)) + __ID_Code_End = .; + } > ID_CODE + + /* Symbol required for RA Configuration tool. */ + __tz_OPTION_SETTING_S = ORIGIN(OPTION_SETTING_OFS); + + .option_setting_ofs : + { + __OPTION_SETTING_OFS_Start = .; + KEEP(*(.option_setting_ofs0)) + . = PROJECT_SECURE_OR_FLAT ? __OPTION_SETTING_OFS_Start + 0x04 : __OPTION_SETTING_OFS_Start; + KEEP(*(.option_setting_ofs2)) + . = PROJECT_SECURE_OR_FLAT ? __OPTION_SETTING_OFS_Start + 0x10 : __OPTION_SETTING_OFS_Start; + KEEP(*(.option_setting_dualsel)) + __OPTION_SETTING_OFS_End = .; + } > OPTION_SETTING_OFS = 0xFF + + .option_setting_sas : + { + __OPTION_SETTING_SAS_Start = .; + KEEP(*(.option_setting_sas)) + __OPTION_SETTING_SAS_End = .; + } > OPTION_SETTING_SAS = 0xFF + + /* Symbol required for RA Configuration tool. */ + __tz_OPTION_SETTING_N = ABSOLUTE(OPTION_SETTING_START_NS); + + .option_setting_ns : + { + __OPTION_SETTING_NS_Start = .; + KEEP(*(.option_setting_ofs1)) + . = USE_OPTION_SETTING_NS ? __OPTION_SETTING_NS_Start + 0x04 : __OPTION_SETTING_NS_Start; + KEEP(*(.option_setting_ofs3)) + . = USE_OPTION_SETTING_NS ? __OPTION_SETTING_NS_Start + 0x10 : __OPTION_SETTING_NS_Start; + KEEP(*(.option_setting_banksel)) + . = USE_OPTION_SETTING_NS ? __OPTION_SETTING_NS_Start + 0x40 : __OPTION_SETTING_NS_Start; + KEEP(*(.option_setting_bps0)) + . = USE_OPTION_SETTING_NS ? __OPTION_SETTING_NS_Start + 0x44 : __OPTION_SETTING_NS_Start; + KEEP(*(.option_setting_bps1)) + . = USE_OPTION_SETTING_NS ? __OPTION_SETTING_NS_Start + 0x48 : __OPTION_SETTING_NS_Start; + KEEP(*(.option_setting_bps2)) + . = USE_OPTION_SETTING_NS ? __OPTION_SETTING_NS_Start + 0x4C : __OPTION_SETTING_NS_Start; + KEEP(*(.option_setting_bps3)) + . = USE_OPTION_SETTING_NS ? __OPTION_SETTING_NS_Start + 0x60 : __OPTION_SETTING_NS_Start; + KEEP(*(.option_setting_pbps0)) + . = USE_OPTION_SETTING_NS ? __OPTION_SETTING_NS_Start + 0x64 : __OPTION_SETTING_NS_Start; + KEEP(*(.option_setting_pbps1)) + . = USE_OPTION_SETTING_NS ? __OPTION_SETTING_NS_Start + 0x68 : __OPTION_SETTING_NS_Start; + KEEP(*(.option_setting_pbps2)) + . = USE_OPTION_SETTING_NS ? __OPTION_SETTING_NS_Start + 0x6C : __OPTION_SETTING_NS_Start; + KEEP(*(.option_setting_pbps3)) + __OPTION_SETTING_NS_End = .; + } > OPTION_SETTING = 0xFF + + /* Symbol required for RA Configuration tool. */ + __tz_OPTION_SETTING_S_S = ORIGIN(OPTION_SETTING_S); + + .option_setting_s : + { + __OPTION_SETTING_S_Start = .; + KEEP(*(.option_setting_ofs1_sec)) + . = PROJECT_SECURE_OR_FLAT ? __OPTION_SETTING_S_Start + 0x04 : __OPTION_SETTING_S_Start; + KEEP(*(.option_setting_ofs3_sec)) + . = PROJECT_SECURE_OR_FLAT ? __OPTION_SETTING_S_Start + 0x10 : __OPTION_SETTING_S_Start; + KEEP(*(.option_setting_banksel_sec)) + . = PROJECT_SECURE_OR_FLAT ? __OPTION_SETTING_S_Start + 0x40 : __OPTION_SETTING_S_Start; + KEEP(*(.option_setting_bps_sec0)) + . = PROJECT_SECURE_OR_FLAT ? __OPTION_SETTING_S_Start + 0x44 : __OPTION_SETTING_S_Start; + KEEP(*(.option_setting_bps_sec1)) + . = PROJECT_SECURE_OR_FLAT ? __OPTION_SETTING_S_Start + 0x48 : __OPTION_SETTING_S_Start; + KEEP(*(.option_setting_bps_sec2)) + . = PROJECT_SECURE_OR_FLAT ? __OPTION_SETTING_S_Start + 0x4C : __OPTION_SETTING_S_Start; + KEEP(*(.option_setting_bps_sec3)) + . = PROJECT_SECURE_OR_FLAT ? __OPTION_SETTING_S_Start + 0x60 : __OPTION_SETTING_S_Start; + KEEP(*(.option_setting_pbps_sec0)) + . = PROJECT_SECURE_OR_FLAT ? __OPTION_SETTING_S_Start + 0x64 : __OPTION_SETTING_S_Start; + KEEP(*(.option_setting_pbps_sec1)) + . = PROJECT_SECURE_OR_FLAT ? __OPTION_SETTING_S_Start + 0x68 : __OPTION_SETTING_S_Start; + KEEP(*(.option_setting_pbps_sec2)) + . = PROJECT_SECURE_OR_FLAT ? __OPTION_SETTING_S_Start + 0x6C : __OPTION_SETTING_S_Start; + KEEP(*(.option_setting_pbps_sec3)) + . = PROJECT_SECURE_OR_FLAT ? __OPTION_SETTING_S_Start + 0x80 : __OPTION_SETTING_S_Start; + KEEP(*(.option_setting_ofs1_sel)) + . = PROJECT_SECURE_OR_FLAT ? __OPTION_SETTING_S_Start + 0x84 : __OPTION_SETTING_S_Start; + KEEP(*(.option_setting_ofs3_sel)) + . = PROJECT_SECURE_OR_FLAT ? __OPTION_SETTING_S_Start + 0x90 : __OPTION_SETTING_S_Start; + KEEP(*(.option_setting_banksel_sel)) + . = PROJECT_SECURE_OR_FLAT ? __OPTION_SETTING_S_Start + 0xC0 : __OPTION_SETTING_S_Start; + KEEP(*(.option_setting_bps_sel0)) + . = PROJECT_SECURE_OR_FLAT ? __OPTION_SETTING_S_Start + 0xC4 : __OPTION_SETTING_S_Start; + KEEP(*(.option_setting_bps_sel1)) + . = PROJECT_SECURE_OR_FLAT ? __OPTION_SETTING_S_Start + 0xC8 : __OPTION_SETTING_S_Start; + KEEP(*(.option_setting_bps_sel2)) + . = PROJECT_SECURE_OR_FLAT ? __OPTION_SETTING_S_Start + 0xCC : __OPTION_SETTING_S_Start; + KEEP(*(.option_setting_bps_sel3)) + __OPTION_SETTING_S_End = .; + } > OPTION_SETTING_S = 0xFF + + /* Symbol required for RA Configuration tool. */ + __tz_OPTION_SETTING_S_N = __OPTION_SETTING_S_End; +} diff --git a/hw/bsp/ra/boards/ra6m5_ek/script/memory_regions.ld b/hw/bsp/ra/boards/ra6m5_ek/script/memory_regions.ld new file mode 100644 index 000000000..19864683f --- /dev/null +++ b/hw/bsp/ra/boards/ra6m5_ek/script/memory_regions.ld @@ -0,0 +1,22 @@ + + /* generated memory regions file - do not edit */ + RAM_START = 0x20000000; + RAM_LENGTH = 0x80000; + FLASH_START = 0x00000000; + FLASH_LENGTH = 0x200000; + DATA_FLASH_START = 0x08000000; + DATA_FLASH_LENGTH = 0x2000; + OPTION_SETTING_START = 0x0100A100; + OPTION_SETTING_LENGTH = 0x100; + OPTION_SETTING_S_START = 0x0100A200; + OPTION_SETTING_S_LENGTH = 0x100; + ID_CODE_START = 0x00000000; + ID_CODE_LENGTH = 0x0; + SDRAM_START = 0x80010000; + SDRAM_LENGTH = 0x0; + QSPI_FLASH_START = 0x60000000; + QSPI_FLASH_LENGTH = 0x4000000; + OSPI_DEVICE_0_START = 0x68000000; + OSPI_DEVICE_0_LENGTH = 0x8000000; + OSPI_DEVICE_1_START = 0x70000000; + OSPI_DEVICE_1_LENGTH = 0x10000000; diff --git a/hw/bsp/ra/boards/ra6m5_ek/smart_configurator/configuration.xml b/hw/bsp/ra/boards/ra6m5_ek/smart_configurator/configuration.xml new file mode 100644 index 000000000..f77a8ac63 --- /dev/null +++ b/hw/bsp/ra/boards/ra6m5_ek/smart_configurator/configuration.xml @@ -0,0 +1,651 @@ + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + Simple application that blinks an LED. No RTOS included. + Renesas.RA_baremetal_blinky.5.6.0.pack + + + Board Support Package Common Files + Renesas.RA.5.6.0.pack + + + I/O Port + Renesas.RA.5.6.0.pack + + + Arm CMSIS Version 6 - Core (M) + Arm.CMSIS6.6.1.0+fsp.5.6.0.pack + + + RA6M5-EK Board Support Files + Renesas.RA_board_ra6m5_ek.5.6.0.pack + + + Board support package for R7FA6M5BH3CFC + Renesas.RA_mcu_ra6m5.5.6.0.pack + + + Board support package for RA6M5 + Renesas.RA_mcu_ra6m5.5.6.0.pack + + + Board support package for RA6M5 - FSP Data + Renesas.RA_mcu_ra6m5.5.6.0.pack + + + Board support package for RA6M5 - Events + Renesas.RA_mcu_ra6m5.5.6.0.pack + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + diff --git a/hw/bsp/ra/boards/ra8m1_ek/smart_configurator/configuration.xml b/hw/bsp/ra/boards/ra8m1_ek/smart_configurator/configuration.xml new file mode 100644 index 000000000..0a9393769 --- /dev/null +++ b/hw/bsp/ra/boards/ra8m1_ek/smart_configurator/configuration.xml @@ -0,0 +1,624 @@ + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + Simple application that blinks an LED. No RTOS included. + Renesas.RA_baremetal_blinky.5.6.0.pack + + + Board Support Package Common Files + Renesas.RA.5.6.0.pack + + + I/O Port + Renesas.RA.5.6.0.pack + + + Arm CMSIS Version 6 - Core (M) + Arm.CMSIS6.6.1.0+fsp.5.6.0.pack + + + RA8M1-EK Board Support Files + Renesas.RA_board_ra8m1_ek.5.6.0.pack + + + Board support package for R7FA8M1AHECBD + Renesas.RA_mcu_ra8m1.5.6.0.pack + + + Board support package for RA8M1 + Renesas.RA_mcu_ra8m1.5.6.0.pack + + + Board support package for RA8M1 - FSP Data + Renesas.RA_mcu_ra8m1.5.6.0.pack + + + Board support package for RA8M1 - Events + Renesas.RA_mcu_ra8m1.5.6.0.pack + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + diff --git a/hw/bsp/ra/boards/uno_r4/board.cmake b/hw/bsp/ra/boards/uno_r4/board.cmake index 9d59bc4f7..3aa6045be 100644 --- a/hw/bsp/ra/boards/uno_r4/board.cmake +++ b/hw/bsp/ra/boards/uno_r4/board.cmake @@ -1,13 +1,9 @@ set(CMAKE_SYSTEM_PROCESSOR cortex-m4 CACHE INTERNAL "System Processor") set(MCU_VARIANT ra4m1) - set(JLINK_DEVICE R7FA4M1AB) -set(LD_FILE_GNU ${CMAKE_CURRENT_LIST_DIR}/${BOARD}.ld) function(update_board TARGET) target_compile_definitions(${TARGET} PUBLIC CFG_EXAMPLE_VIDEO_READONLY ) -# target_sources(${TARGET} PRIVATE) -# target_include_directories(${BOARD_TARGET} PUBLIC) endfunction() diff --git a/hw/bsp/ra/boards/uno_r4/ra_cfg/fsp_cfg/bsp/bsp_cfg.h b/hw/bsp/ra/boards/uno_r4/ra_cfg/fsp_cfg/bsp/bsp_cfg.h index c1d1022cc..4eef62a0e 100644 --- a/hw/bsp/ra/boards/uno_r4/ra_cfg/fsp_cfg/bsp/bsp_cfg.h +++ b/hw/bsp/ra/boards/uno_r4/ra_cfg/fsp_cfg/bsp/bsp_cfg.h @@ -1,35 +1,62 @@ /* generated configuration header file - do not edit */ #ifndef BSP_CFG_H_ #define BSP_CFG_H_ - -#include "bsp_clock_cfg.h" -#include "bsp_mcu_family_cfg.h" -#include "board_cfg.h" - -#undef RA_NOT_DEFINED -#define BSP_CFG_RTOS (0) -#if defined(_RA_BOOT_IMAGE) -#define BSP_CFG_BOOT_IMAGE (1) -#endif -#define BSP_CFG_MCU_VCC_MV (3300) -#define BSP_CFG_STACK_MAIN_BYTES (0x800) -#define BSP_CFG_HEAP_BYTES (0x1000) -#define BSP_CFG_PARAM_CHECKING_ENABLE (1) -#define BSP_CFG_ASSERT (0) -#define BSP_CFG_ERROR_LOG (0) - -#define BSP_CFG_PFS_PROTECT ((1)) - -#define BSP_CFG_C_RUNTIME_INIT ((1)) -#define BSP_CFG_EARLY_INIT ((0)) - -#define BSP_CFG_STARTUP_CLOCK_REG_NOT_RESET ((0)) - -#define BSP_CLOCK_CFG_MAIN_OSC_POPULATED (0) - -#define BSP_CLOCK_CFG_MAIN_OSC_CLOCK_SOURCE (0) -#define BSP_CLOCK_CFG_SUBCLOCK_DRIVE (0) -#define BSP_CLOCK_CFG_SUBCLOCK_POPULATED (0) -#define BSP_CLOCK_CFG_SUBCLOCK_STABILIZATION_MS 1000 - +#ifdef __cplusplus + extern "C" { + #endif + + #include "bsp_clock_cfg.h" + #include "bsp_mcu_family_cfg.h" + #include "board_cfg.h" + #define RA_NOT_DEFINED 0 + #ifndef BSP_CFG_RTOS + #if (RA_NOT_DEFINED) != (RA_NOT_DEFINED) + #define BSP_CFG_RTOS (2) + #elif (RA_NOT_DEFINED) != (RA_NOT_DEFINED) + #define BSP_CFG_RTOS (1) + #else + #define BSP_CFG_RTOS (0) + #endif + #endif + #ifndef BSP_CFG_RTC_USED + #define BSP_CFG_RTC_USED (RA_NOT_DEFINED) + #endif + #undef RA_NOT_DEFINED + #if defined(_RA_BOOT_IMAGE) + #define BSP_CFG_BOOT_IMAGE (1) + #endif + #define BSP_CFG_MCU_VCC_MV (3300) + #define BSP_CFG_STACK_MAIN_BYTES (0x800) + #define BSP_CFG_HEAP_BYTES (0x1000) + #define BSP_CFG_PARAM_CHECKING_ENABLE (0) + #define BSP_CFG_ASSERT (0) + #define BSP_CFG_ERROR_LOG (0) + + #define BSP_CFG_PFS_PROTECT ((1)) + + #define BSP_CFG_C_RUNTIME_INIT ((1)) + #define BSP_CFG_EARLY_INIT ((0)) + + #define BSP_CFG_STARTUP_CLOCK_REG_NOT_RESET ((0)) + + #ifndef BSP_CLOCK_CFG_MAIN_OSC_POPULATED + #define BSP_CLOCK_CFG_MAIN_OSC_POPULATED (0) + #endif + + #ifndef BSP_CLOCK_CFG_MAIN_OSC_CLOCK_SOURCE + #define BSP_CLOCK_CFG_MAIN_OSC_CLOCK_SOURCE (0) + #endif + #ifndef BSP_CLOCK_CFG_SUBCLOCK_DRIVE + #define BSP_CLOCK_CFG_SUBCLOCK_DRIVE (0) + #endif + #ifndef BSP_CLOCK_CFG_SUBCLOCK_POPULATED + #define BSP_CLOCK_CFG_SUBCLOCK_POPULATED (0) + #endif + #ifndef BSP_CLOCK_CFG_SUBCLOCK_STABILIZATION_MS + #define BSP_CLOCK_CFG_SUBCLOCK_STABILIZATION_MS 1000 + #endif + + #ifdef __cplusplus + } + #endif #endif /* BSP_CFG_H_ */ diff --git a/hw/bsp/ra/boards/uno_r4/ra_cfg/fsp_cfg/bsp/bsp_mcu_device_pn_cfg.h b/hw/bsp/ra/boards/uno_r4/ra_cfg/fsp_cfg/bsp/bsp_mcu_device_pn_cfg.h index 336918800..3f1d02b0d 100644 --- a/hw/bsp/ra/boards/uno_r4/ra_cfg/fsp_cfg/bsp/bsp_mcu_device_pn_cfg.h +++ b/hw/bsp/ra/boards/uno_r4/ra_cfg/fsp_cfg/bsp/bsp_mcu_device_pn_cfg.h @@ -2,10 +2,10 @@ #ifndef BSP_MCU_DEVICE_PN_CFG_H_ #define BSP_MCU_DEVICE_PN_CFG_H_ #define BSP_MCU_R7FA4M1AB3CNE -#define BSP_MCU_FEATURE_SET ('A') -#define BSP_ROM_SIZE_BYTES (262144) -#define BSP_RAM_SIZE_BYTES (32768) -#define BSP_DATA_FLASH_SIZE_BYTES (8192) -#define BSP_PACKAGE_QFN -#define BSP_PACKAGE_PINS (48) + #define BSP_MCU_FEATURE_SET ('A') + #define BSP_ROM_SIZE_BYTES (262144) + #define BSP_RAM_SIZE_BYTES (32768) + #define BSP_DATA_FLASH_SIZE_BYTES (8192) + #define BSP_PACKAGE_QFN + #define BSP_PACKAGE_PINS (48) #endif /* BSP_MCU_DEVICE_PN_CFG_H_ */ diff --git a/hw/bsp/ra/boards/uno_r4/ra_cfg/fsp_cfg/bsp/bsp_mcu_family_cfg.h b/hw/bsp/ra/boards/uno_r4/ra_cfg/fsp_cfg/bsp/bsp_mcu_family_cfg.h index fc604eb3b..3d482b2b6 100644 --- a/hw/bsp/ra/boards/uno_r4/ra_cfg/fsp_cfg/bsp/bsp_mcu_family_cfg.h +++ b/hw/bsp/ra/boards/uno_r4/ra_cfg/fsp_cfg/bsp/bsp_mcu_family_cfg.h @@ -1,87 +1,84 @@ -/* generated configuration header file through renesas e2 studio */ +/* generated configuration header file - do not edit */ #ifndef BSP_MCU_FAMILY_CFG_H_ #define BSP_MCU_FAMILY_CFG_H_ - #ifdef __cplusplus -extern "C" { -#endif - -#include "bsp_mcu_device_pn_cfg.h" -#include "bsp_mcu_device_cfg.h" -#include "bsp_mcu_info.h" -#include "bsp_clock_cfg.h" + extern "C" { + #endif -#define BSP_MCU_GROUP_RA4M1 (1) -#define BSP_LOCO_HZ (32768) -#define BSP_MOCO_HZ (8000000) -#define BSP_SUB_CLOCK_HZ (32768) -#if BSP_CFG_HOCO_FREQUENCY == 0 - #define BSP_HOCO_HZ (24000000) -#elif BSP_CFG_HOCO_FREQUENCY == 2 - #define BSP_HOCO_HZ (32000000) -#elif BSP_CFG_HOCO_FREQUENCY == 4 - #define BSP_HOCO_HZ (48000000) -#elif BSP_CFG_HOCO_FREQUENCY == 5 - #define BSP_HOCO_HZ (64000000) -#else - #error "Invalid HOCO frequency chosen (BSP_CFG_HOCO_FREQUENCY) in bsp_clock_cfg.h" -#endif -#define BSP_CORTEX_VECTOR_TABLE_ENTRIES (16U) -#define BSP_VECTOR_TABLE_MAX_ENTRIES (48U) -#define BSP_MCU_VBATT_SUPPORT (1) + #include "bsp_mcu_device_pn_cfg.h" + #include "bsp_mcu_device_cfg.h" + #include "../../../ra/fsp/src/bsp/mcu/ra4m1/bsp_mcu_info.h" + #include "bsp_clock_cfg.h" + #define BSP_MCU_GROUP_RA4M1 (1) + #define BSP_LOCO_HZ (32768) + #define BSP_MOCO_HZ (8000000) + #define BSP_SUB_CLOCK_HZ (32768) + #if BSP_CFG_HOCO_FREQUENCY == 0 + #define BSP_HOCO_HZ (24000000) + #elif BSP_CFG_HOCO_FREQUENCY == 2 + #define BSP_HOCO_HZ (32000000) + #elif BSP_CFG_HOCO_FREQUENCY == 4 + #define BSP_HOCO_HZ (48000000) + #elif BSP_CFG_HOCO_FREQUENCY == 5 + #define BSP_HOCO_HZ (64000000) + #else + #error "Invalid HOCO frequency chosen (BSP_CFG_HOCO_FREQUENCY) in bsp_clock_cfg.h" + #endif + #define BSP_CORTEX_VECTOR_TABLE_ENTRIES (16U) + #define BSP_VECTOR_TABLE_MAX_ENTRIES (48U) + #define BSP_CFG_INLINE_IRQ_FUNCTIONS (1) -#define OFS_SEQ1 0xA001A001 | (1 << 1) | (3 << 2) -#define OFS_SEQ2 (15 << 4) | (3 << 8) | (3 << 10) -#define OFS_SEQ3 (1 << 12) | (1 << 14) | (1 << 17) -#define OFS_SEQ4 (3 << 18) |(15 << 20) | (3 << 24) | (3 << 26) -#define OFS_SEQ5 (1 << 28) | (1 << 30) -#define BSP_CFG_ROM_REG_OFS0 (OFS_SEQ1 | OFS_SEQ2 | OFS_SEQ3 | OFS_SEQ4 | OFS_SEQ5) -#define BSP_CFG_ROM_REG_OFS1 (0xFFFFFEC3 | (1 << 2) | (3 << 3) | (0 << 8)) -#define BSP_CFG_USE_LOW_VOLTAGE_MODE ((0)) -#define BSP_CFG_ROM_REG_MPU_PC0_ENABLE (1) -#define BSP_CFG_ROM_REG_MPU_PC0_START (0x00FFFFFC) -#define BSP_CFG_ROM_REG_MPU_PC0_END (0x00FFFFFF) -#define BSP_CFG_ROM_REG_MPU_PC1_ENABLE (1) -#define BSP_CFG_ROM_REG_MPU_PC1_START (0x00FFFFFC) -#define BSP_CFG_ROM_REG_MPU_PC1_END (0x00FFFFFF) -#define BSP_CFG_ROM_REG_MPU_REGION0_ENABLE (1) -#define BSP_CFG_ROM_REG_MPU_REGION0_START (0x00FFFFFC) -#define BSP_CFG_ROM_REG_MPU_REGION0_END (0x00FFFFFF) -#define BSP_CFG_ROM_REG_MPU_REGION1_ENABLE (1) -#define BSP_CFG_ROM_REG_MPU_REGION1_START (0x200FFFFC) -#define BSP_CFG_ROM_REG_MPU_REGION1_END (0x200FFFFF) -#define BSP_CFG_ROM_REG_MPU_REGION2_ENABLE (1) -#define BSP_CFG_ROM_REG_MPU_REGION2_START (0x407FFFFC) -#define BSP_CFG_ROM_REG_MPU_REGION2_END (0x407FFFFF) -#define BSP_CFG_ROM_REG_MPU_REGION3_ENABLE (1) -#define BSP_CFG_ROM_REG_MPU_REGION3_START (0x400DFFFC) -#define BSP_CFG_ROM_REG_MPU_REGION3_END (0x400DFFFF) -#ifndef BSP_CLOCK_CFG_MAIN_OSC_WAIT -#define BSP_CLOCK_CFG_MAIN_OSC_WAIT (9) -#endif -/* Used to create IELS values for the interrupt initialization table g_interrupt_event_link_select. */ -#define BSP_PRV_IELS_ENUM(vector) (ELC_ ## vector) + #define OFS_SEQ1 0xA001A001 | (1 << 1) | (3 << 2) + #define OFS_SEQ2 (15 << 4) | (3 << 8) | (3 << 10) + #define OFS_SEQ3 (1 << 12) | (1 << 14) | (1 << 17) + #define OFS_SEQ4 (3 << 18) |(15 << 20) | (3 << 24) | (3 << 26) + #define OFS_SEQ5 (1 << 28) | (1 << 30) + #define BSP_CFG_ROM_REG_OFS0 (OFS_SEQ1 | OFS_SEQ2 | OFS_SEQ3 | OFS_SEQ4 | OFS_SEQ5) + #define BSP_CFG_ROM_REG_OFS1 (0xFFFFFEC3 | (1 << 2) | (3 << 3) | (0 << 8)) + #define BSP_CFG_USE_LOW_VOLTAGE_MODE ((0)) + #define BSP_CFG_ROM_REG_MPU_PC0_ENABLE (1) + #define BSP_CFG_ROM_REG_MPU_PC0_START (0x00FFFFFC) + #define BSP_CFG_ROM_REG_MPU_PC0_END (0x00FFFFFF) + #define BSP_CFG_ROM_REG_MPU_PC1_ENABLE (1) + #define BSP_CFG_ROM_REG_MPU_PC1_START (0x00FFFFFC) + #define BSP_CFG_ROM_REG_MPU_PC1_END (0x00FFFFFF) + #define BSP_CFG_ROM_REG_MPU_REGION0_ENABLE (1) + #define BSP_CFG_ROM_REG_MPU_REGION0_START (0x00FFFFFC) + #define BSP_CFG_ROM_REG_MPU_REGION0_END (0x00FFFFFF) + #define BSP_CFG_ROM_REG_MPU_REGION1_ENABLE (1) + #define BSP_CFG_ROM_REG_MPU_REGION1_START (0x200FFFFC) + #define BSP_CFG_ROM_REG_MPU_REGION1_END (0x200FFFFF) + #define BSP_CFG_ROM_REG_MPU_REGION2_ENABLE (1) + #define BSP_CFG_ROM_REG_MPU_REGION2_START (0x407FFFFC) + #define BSP_CFG_ROM_REG_MPU_REGION2_END (0x407FFFFF) + #define BSP_CFG_ROM_REG_MPU_REGION3_ENABLE (1) + #define BSP_CFG_ROM_REG_MPU_REGION3_START (0x400DFFFC) + #define BSP_CFG_ROM_REG_MPU_REGION3_END (0x400DFFFF) + #ifndef BSP_CLOCK_CFG_MAIN_OSC_WAIT + #define BSP_CLOCK_CFG_MAIN_OSC_WAIT (9) + #endif + /* Used to create IELS values for the interrupt initialization table g_interrupt_event_link_select. */ + #define BSP_PRV_IELS_ENUM(vector) (ELC_ ## vector) -/* - ID Code - Note: To permanently lock and disable the debug interface define the BSP_ID_CODE_PERMANENTLY_LOCKED in the compiler settings. - WARNING: This will disable debug access to the part and cannot be reversed by a debug probe. - */ -#if defined(BSP_ID_CODE_PERMANENTLY_LOCKED) + /* + ID Code + Note: To permanently lock and disable the debug interface define the BSP_ID_CODE_PERMANENTLY_LOCKED in the compiler settings. + WARNING: This will disable debug access to the part and cannot be reversed by a debug probe. + */ + #if defined(BSP_ID_CODE_PERMANENTLY_LOCKED) #define BSP_CFG_ID_CODE_LONG_1 (0x00000000) #define BSP_CFG_ID_CODE_LONG_2 (0x00000000) #define BSP_CFG_ID_CODE_LONG_3 (0x00000000) #define BSP_CFG_ID_CODE_LONG_4 (0x00000000) #else -/* ID CODE: FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF */ -#define BSP_CFG_ID_CODE_LONG_1 (0xFFFFFFFF) -#define BSP_CFG_ID_CODE_LONG_2 (0xFFFFFFFF) -#define BSP_CFG_ID_CODE_LONG_3 (0xFFFFFFFF) -#define BSP_CFG_ID_CODE_LONG_4 (0xffFFFFFF) -#endif - -#ifdef __cplusplus -} -#endif + /* ID CODE: FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF */ + #define BSP_CFG_ID_CODE_LONG_1 (0xFFFFFFFF) + #define BSP_CFG_ID_CODE_LONG_2 (0xFFFFFFFF) + #define BSP_CFG_ID_CODE_LONG_3 (0xFFFFFFFF) + #define BSP_CFG_ID_CODE_LONG_4 (0xffFFFFFF) + #endif + #ifdef __cplusplus + } + #endif #endif /* BSP_MCU_FAMILY_CFG_H_ */ diff --git a/hw/bsp/ra/boards/uno_r4/ra_gen/bsp_clock_cfg.h b/hw/bsp/ra/boards/uno_r4/ra_gen/bsp_clock_cfg.h index 63618ec4b..559000a7a 100644 --- a/hw/bsp/ra/boards/uno_r4/ra_gen/bsp_clock_cfg.h +++ b/hw/bsp/ra/boards/uno_r4/ra_gen/bsp_clock_cfg.h @@ -4,10 +4,10 @@ #define BSP_CFG_CLOCKS_SECURE (0) #define BSP_CFG_CLOCKS_OVERRIDE (0) #define BSP_CFG_XTAL_HZ (0) /* XTAL 0Hz */ -#define BSP_CFG_PLL_SOURCE (BSP_CLOCKS_CLOCK_DISABLED) /* PLL Src: XTAL */ +#define BSP_CFG_PLL_SOURCE (BSP_CLOCKS_CLOCK_DISABLED) /* PLL Src: Disabled */ #define BSP_CFG_HOCO_FREQUENCY (4) /* HOCO 48MHz */ #define BSP_CFG_PLL_DIV (BSP_CLOCKS_PLL_DIV_4) /* PLL Div /4 */ -#define BSP_CFG_PLL_MUL BSP_CLOCKS_PLL_MUL(12, 0) /* PLL Mul x12 */ +#define BSP_CFG_PLL_MUL BSP_CLOCKS_PLL_MUL(12U,0U) /* PLL Mul x12 */ #define BSP_CFG_CLOCK_SOURCE (BSP_CLOCKS_SOURCE_CLOCK_HOCO) /* Clock Src: HOCO */ #define BSP_CFG_ICLK_DIV (BSP_CLOCKS_SYS_CLOCK_DIV_1) /* ICLK Div /1 */ #define BSP_CFG_PCLKA_DIV (BSP_CLOCKS_SYS_CLOCK_DIV_1) /* PCLKA Div /1 */ @@ -15,7 +15,7 @@ #define BSP_CFG_PCLKC_DIV (BSP_CLOCKS_SYS_CLOCK_DIV_1) /* PCLKC Div /1 */ #define BSP_CFG_PCLKD_DIV (BSP_CLOCKS_SYS_CLOCK_DIV_1) /* PCLKD Div /1 */ #define BSP_CFG_FCLK_DIV (BSP_CLOCKS_SYS_CLOCK_DIV_2) /* FCLK Div /2 */ -#define BSP_CFG_CLKOUT_SOURCE (BSP_CLOCKS_CLOCK_DISABLED) /* CLKOUT Src: SUBCLK */ +#define BSP_CFG_CLKOUT_SOURCE (BSP_CLOCKS_CLOCK_DISABLED) /* CLKOUT Disabled */ #define BSP_CFG_CLKOUT_DIV (BSP_CLOCKS_SYS_CLOCK_DIV_1) /* CLKOUT Div /1 */ #define BSP_CFG_UCK_SOURCE (BSP_CLOCKS_SOURCE_CLOCK_HOCO) /* UCLK Src: HOCO */ #endif /* BSP_CLOCK_CFG_H_ */ diff --git a/hw/bsp/ra/boards/uno_r4/script/fsp.ld b/hw/bsp/ra/boards/uno_r4/script/fsp.ld new file mode 100644 index 000000000..627ffe4d9 --- /dev/null +++ b/hw/bsp/ra/boards/uno_r4/script/fsp.ld @@ -0,0 +1,766 @@ +/* + Linker File for Renesas FSP +*/ + +INCLUDE memory_regions.ld + +/* Uncomment and set XIP_SECONDARY_SLOT_IMAGE to 1 below for the secondary XIP application image.*/ +/* + XIP_SECONDARY_SLOT_IMAGE = 1; +*/ + +QSPI_FLASH_PRV_LENGTH = DEFINED(QSPI_FLASH_SIZE) ? ABSOLUTE(QSPI_FLASH_SIZE) : ABSOLUTE(QSPI_FLASH_LENGTH); +OSPI_DEVICE_0_PRV_LENGTH = DEFINED(OSPI_DEVICE_0_SIZE) ? ABSOLUTE(OSPI_DEVICE_0_SIZE) : ABSOLUTE(OSPI_DEVICE_0_LENGTH); +OSPI_DEVICE_1_PRV_LENGTH = DEFINED(OSPI_DEVICE_1_SIZE) ? ABSOLUTE(OSPI_DEVICE_1_SIZE) : ABSOLUTE(OSPI_DEVICE_1_LENGTH); + +/* If a flat (secure) project has DEFINED RAM_NS_BUFFER_LENGTH, then emit IDAU symbols to allocate non-secure RAM. */ +__RESERVE_NS_RAM = !DEFINED(PROJECT_NONSECURE) && DEFINED(RAM_NS_BUFFER_LENGTH) && (OPTION_SETTING_S_LENGTH != 0); + +ITCM_START = DEFINED(ITCM_START)? ITCM_START : 0; +ITCM_LENGTH = DEFINED(ITCM_LENGTH)? ITCM_LENGTH : 0; +DTCM_START = DEFINED(DTCM_START)? DTCM_START : 0; +DTCM_LENGTH = DEFINED(DTCM_LENGTH)? DTCM_LENGTH : 0; +RAM_NS_BUFFER_BLOCK_LENGTH = DEFINED(RAM_NS_BUFFER_LENGTH) ? ALIGN(RAM_NS_BUFFER_LENGTH, 8192) : 0; +RAM_NS_BUFFER_LENGTH = DEFINED(RAM_NS_BUFFER_LENGTH) ? RAM_NS_BUFFER_LENGTH : 0; +RAM_NS_BUFFER_START = RAM_START + RAM_LENGTH - RAM_NS_BUFFER_LENGTH; +RAM_NS_BUFFER_BLOCK_START = RAM_START + RAM_LENGTH - RAM_NS_BUFFER_BLOCK_LENGTH; + +OPTION_SETTING_START_NS = DEFINED(PROJECT_NONSECURE) ? OPTION_SETTING_START : OPTION_SETTING_START + 0x80; + +/* This definition is used to avoid moving the counter in OPTION_SETTING regions for projects that should not configure option settings. + * Bootloader images do not configure option settings because they are owned by the bootloader. + * FSP_BOOTABLE_IMAGE is only defined in bootloader images. */ +__bl_FSP_BOOTABLE_IMAGE = 1; +__bln_FSP_BOOTABLE_IMAGE = 1; +PROJECT_SECURE_OR_FLAT = (!DEFINED(PROJECT_NONSECURE) || DEFINED(PROJECT_SECURE)) && OPTION_SETTING_LENGTH && !DEFINED(FSP_BOOTABLE_IMAGE); +USE_OPTION_SETTING_NS = DEFINED(PROJECT_NONSECURE) && !DEFINED(FSP_BOOTABLE_IMAGE); + +__bl_FLASH_IMAGE_START = !DEFINED(FLASH_BOOTLOADER_LENGTH) ? 0 : + FLASH_APPLICATION_IMAGE_NUMBER == 1 ? FLASH_START + FLASH_BOOTLOADER_LENGTH + FLASH_BOOTLOADER_HEADER_LENGTH : + (DEFINED(BOOTLOADER_SECONDARY_USE_QSPI) || DEFINED(BOOTLOADER_SECONDARY_USE_OSPI_B)) ? FLASH_START + FLASH_BOOTLOADER_LENGTH + FLASH_BOOTLOADER_SCRATCH_LENGTH + FLASH_BOOTLOADER_HEADER_LENGTH : + FLASH_START + FLASH_BOOTLOADER_LENGTH + FLASH_BOOTLOADER_SCRATCH_LENGTH + FLASH_APPLICATION_S_LENGTH + FLASH_BOOTLOADER_HEADER_LENGTH; +__bl_FLASH_IMAGE_LENGTH = !DEFINED(FLASH_BOOTLOADER_LENGTH) ? 0 : + FLASH_APPLICATION_S_LENGTH - FLASH_BOOTLOADER_HEADER_LENGTH; +__bl_FLASH_IMAGE_END = __bl_FLASH_IMAGE_START + __bl_FLASH_IMAGE_LENGTH; +__bl_XIP_SECONDARY_FLASH_IMAGE_START = !DEFINED(FLASH_BOOTLOADER_LENGTH) ? 0 : + FLASH_START + FLASH_BOOTLOADER_LENGTH + FLASH_APPLICATION_S_LENGTH + FLASH_BOOTLOADER_HEADER_LENGTH; +__bl_XIP_SECONDARY_FLASH_IMAGE_END = __bl_XIP_SECONDARY_FLASH_IMAGE_START + __bl_FLASH_IMAGE_LENGTH; +__bl_FLASH_NS_START = !DEFINED(FLASH_BOOTLOADER_LENGTH) ? 0 : + FLASH_APPLICATION_NS_LENGTH == 0 ? __bl_FLASH_IMAGE_END : + __bl_FLASH_IMAGE_START - FLASH_BOOTLOADER_HEADER_LENGTH + FLASH_APPLICATION_S_LENGTH; +__bl_FLASH_NSC_START = !DEFINED(FLASH_BOOTLOADER_LENGTH) ? 0 : + FLASH_APPLICATION_NS_LENGTH == 0 ? __bl_FLASH_IMAGE_END : + __bl_FLASH_IMAGE_END - FLASH_APPLICATION_NSC_LENGTH; +__bl_RAM_NS_START = !DEFINED(FLASH_BOOTLOADER_LENGTH) ? 0 : + FLASH_APPLICATION_NS_LENGTH == 0 ? RAM_START + RAM_LENGTH : + RAM_START + RAM_LENGTH - RAM_APPLICATION_NS_LENGTH; +__bl_RAM_NSC_START = !DEFINED(FLASH_BOOTLOADER_LENGTH) ? 0 : + FLASH_APPLICATION_NS_LENGTH == 0 ? RAM_START + RAM_LENGTH : + __bl_RAM_NS_START - RAM_APPLICATION_NSC_LENGTH; +__bl_FLASH_NS_IMAGE_START = !DEFINED(FLASH_BOOTLOADER_LENGTH) ? 0 : + FLASH_APPLICATION_NS_LENGTH == 0 ? __bl_FLASH_IMAGE_END : + __bl_FLASH_NS_START + FLASH_BOOTLOADER_HEADER_LENGTH_2; +__bln_FLASH_IMAGE_START = __bl_FLASH_NS_IMAGE_START | (!DEFINED (NS_OFFSET_START) ? 0 : NS_OFFSET_START); +__bln_FLASH_IMAGE_LENGTH = !DEFINED(FLASH_BOOTLOADER_LENGTH) ? 0 : + FLASH_APPLICATION_NS_LENGTH == 0 ? __bl_FLASH_IMAGE_END : + FLASH_APPLICATION_NS_LENGTH - FLASH_BOOTLOADER_HEADER_LENGTH_2; + +XIP_SECONDARY_SLOT_IMAGE = DEFINED(XIP_SECONDARY_SLOT_IMAGE) ? XIP_SECONDARY_SLOT_IMAGE : 0; +FLASH_ORIGIN = !DEFINED(FLASH_IMAGE_START) ? FLASH_START : + XIP_SECONDARY_SLOT_IMAGE == 1 ? XIP_SECONDARY_FLASH_IMAGE_START : + FLASH_IMAGE_START; +LIMITED_FLASH_LENGTH = DEFINED(FLASH_IMAGE_LENGTH) ? FLASH_IMAGE_LENGTH : + DEFINED(FLASH_BOOTLOADER_LENGTH) ? FLASH_BOOTLOADER_LENGTH : + FLASH_LENGTH; +OPTION_SETTING_SAS_SIZE = 0x34; +OPTION_SETTING_SAS_LENGTH = !DEFINED(OPTION_SETTING_LENGTH) ? 0 : + OPTION_SETTING_LENGTH == 0 ? 0 : + OPTION_SETTING_LENGTH - OPTION_SETTING_SAS_SIZE; + +/* Define memory regions. */ +MEMORY +{ + ITCM (rx) : ORIGIN = ITCM_START, LENGTH = ITCM_LENGTH + DTCM (rwx) : ORIGIN = DTCM_START, LENGTH = DTCM_LENGTH + FLASH (rx) : ORIGIN = FLASH_ORIGIN, LENGTH = LIMITED_FLASH_LENGTH + RAM (rwx) : ORIGIN = RAM_START, LENGTH = RAM_LENGTH + DATA_FLASH (rx) : ORIGIN = DATA_FLASH_START, LENGTH = DATA_FLASH_LENGTH + QSPI_FLASH (rx) : ORIGIN = QSPI_FLASH_START, LENGTH = QSPI_FLASH_PRV_LENGTH + OSPI_DEVICE_0 (rx) : ORIGIN = OSPI_DEVICE_0_START, LENGTH = OSPI_DEVICE_0_PRV_LENGTH + OSPI_DEVICE_1 (rx) : ORIGIN = OSPI_DEVICE_1_START, LENGTH = OSPI_DEVICE_1_PRV_LENGTH + OSPI_DEVICE_0_RAM (rwx) : ORIGIN = OSPI_DEVICE_0_START, LENGTH = OSPI_DEVICE_0_PRV_LENGTH + OSPI_DEVICE_1_RAM (rwx) : ORIGIN = OSPI_DEVICE_1_START, LENGTH = OSPI_DEVICE_1_PRV_LENGTH + SDRAM (rwx) : ORIGIN = SDRAM_START, LENGTH = SDRAM_LENGTH + OPTION_SETTING (r) : ORIGIN = OPTION_SETTING_START, LENGTH = OPTION_SETTING_LENGTH + OPTION_SETTING_OFS (r) : ORIGIN = OPTION_SETTING_START, LENGTH = 0x18 + OPTION_SETTING_SAS (r) : ORIGIN = OPTION_SETTING_START + OPTION_SETTING_SAS_SIZE, LENGTH = OPTION_SETTING_SAS_LENGTH + OPTION_SETTING_S (r) : ORIGIN = OPTION_SETTING_S_START, LENGTH = OPTION_SETTING_S_LENGTH + ID_CODE (rx) : ORIGIN = ID_CODE_START, LENGTH = ID_CODE_LENGTH +} + +/* Library configurations */ +GROUP(libgcc.a libc.a libm.a) + +/* Linker script to place sections and symbol values. Should be used together + * with other linker script that defines memory regions FLASH and RAM. + * It references following symbols, which must be DEFINED in code: + * Reset_Handler : Entry of reset handler + * + * It defines following symbols, which code can use without definition: + * __exidx_start + * __exidx_end + * __copy_table_start__ + * __copy_table_end__ + * __zero_table_start__ + * __zero_table_end__ + * __etext + * __data_start__ + * __preinit_array_start + * __preinit_array_end + * __init_array_start + * __init_array_end + * __fini_array_start + * __fini_array_end + * __data_end__ + * __bss_start__ + * __bss_end__ + * __HeapLimit + * __StackLimit + * __StackTop + * __stack + * __Vectors_End + * __Vectors_Size + * __qspi_flash_start__ + * __qspi_flash_end__ + * __qspi_flash_code_size__ + * __qspi_region_max_size__ + * __qspi_region_start_address__ + * __qspi_region_end_address__ + * __ospi_device_0_start__ + * __ospi_device_0_end__ + * __ospi_device_0_code_size__ + * __ospi_device_0_region_max_size__ + * __ospi_device_0_region_start_address__ + * __ospi_device_0_region_end_address__ + * __ospi_device_1_start__ + * __ospi_device_1_end__ + * __ospi_device_1_code_size__ + * __ospi_device_1_region_max_size__ + * __ospi_device_1_region_start_address__ + * __ospi_device_1_region_end_address__ + */ +ENTRY(Reset_Handler) + +SECTIONS +{ + .text : + { + __tz_FLASH_S = ABSOLUTE(FLASH_START); + __ROM_Start = .; + + /* Even though the vector table is not 256 entries (1KB) long, we still allocate that much + * space because ROM registers are at address 0x400 and there is very little space + * in between. */ + KEEP(*(.fixed_vectors*)) + KEEP(*(.application_vectors*)) + __Vectors_End = .; + + /* Some devices have a gap of code flash between the vector table and ROM Registers. + * The flash gap section allows applications to place code and data in this section. */ + *(.flash_gap*) + + /* ROM Registers start at address 0x00000400 for devices that do not have the OPTION_SETTING region. */ + . = OPTION_SETTING_LENGTH > 0 ? . : __ROM_Start + 0x400; + KEEP(*(.rom_registers*)) + + /* Allocate flash write-boundary-aligned + * space for sce9 wrapped public keys for mcuboot if the module is used. + */ + KEEP(*(.mcuboot_sce9_key*)) + + *(.text*) + + KEEP(*(.version)) + KEEP(*(.init)) + KEEP(*(.fini)) + + /* .ctors */ + *crtbegin.o(.ctors) + *crtbegin?.o(.ctors) + *(EXCLUDE_FILE(*crtend?.o *crtend.o) .ctors) + *(SORT(.ctors.*)) + *(.ctors) + + /* .dtors */ + *crtbegin.o(.dtors) + *crtbegin?.o(.dtors) + *(EXCLUDE_FILE(*crtend?.o *crtend.o) .dtors) + *(SORT(.dtors.*)) + *(.dtors) + + *(.rodata*) + __usb_dev_descriptor_start_fs = .; + KEEP(*(.usb_device_desc_fs*)) + __usb_cfg_descriptor_start_fs = .; + KEEP(*(.usb_config_desc_fs*)) + __usb_interface_descriptor_start_fs = .; + KEEP(*(.usb_interface_desc_fs*)) + __usb_descriptor_end_fs = .; + __usb_dev_descriptor_start_hs = .; + KEEP(*(.usb_device_desc_hs*)) + __usb_cfg_descriptor_start_hs = .; + KEEP(*(.usb_config_desc_hs*)) + __usb_interface_descriptor_start_hs = .; + KEEP(*(.usb_interface_desc_hs*)) + __usb_descriptor_end_hs = .; + + KEEP(*(.eh_frame*)) + + __ROM_End = .; + } > FLASH = 0xFF + + __Vectors_Size = __Vectors_End - __Vectors; + + . = .; + __itcm_data_pre_location = .; + + /* Initialized ITCM data. */ + /* Aligned to FCACHE2 for RA8. */ + .itcm_data : ALIGN(16) + { + /* Start of ITCM Secure Trustzone region. */ + __tz_ITCM_S = ABSOLUTE(ITCM_START); + + /* All ITCM data start */ + __itcm_data_start = .; + + KEEP(*(.itcm_data*)) + + /* Pad to eight byte alignment in case of ECC initialization. Fill zero. */ + . = ALIGN(8); + + /* All ITCM data end */ + __itcm_data_end = .; + + /* + * Start of the ITCM Non-Secure Trustzone region. + * ITCM_NS_START can be used to set a fixed address for non-secure ITCM in secure projects or flat projects. + */ + __tz_ITCM_N = DEFINED(ITCM_NS_START) ? ABSOLUTE(ITCM_NS_START) : ALIGN(__itcm_data_end, 8192); + } > ITCM AT > FLASH = 0x00 + + /* Addresses exported for ITCM initialization. */ + __itcm_data_init_start = LOADADDR(.itcm_data); + __itcm_data_init_end = LOADADDR(.itcm_data) + SIZEOF(.itcm_data); + + ASSERT(ORIGIN(ITCM) % 8 == 0, "ITCM memory region origin must be aligned to 8 bytes.") + ASSERT(LENGTH(ITCM) % 8 == 0, "ITCM memory region length must be a multiple of 8 bytes.") + ASSERT(LOADADDR(.itcm_data) % 16 == 0, ".itcm_data section must be aligned to 16 bytes.") + ASSERT(SIZEOF(.itcm_data) % 8 == 0, ".itcm_data section size must be a multiple of 8 bytes.") + + /* Restore location counter. */ + /* If ITCM is not present, this will be the address stored in '.' before ALIGN was attempted. */ + /* If ITCM is present, this will be the absolute address that follows the ITCM ROM location. */ + . = (SIZEOF(.itcm_data) > 0) ? __itcm_data_init_end : __itcm_data_pre_location; + + __exidx_start = .; + /DISCARD/ : + { + *(.ARM.extab* .gnu.linkonce.armextab.*) + *(.ARM.exidx* .gnu.linkonce.armexidx.*) + } + __exidx_end = .; + + /* To copy multiple ROM to RAM sections, + * uncomment .copy.table section and, + * define __STARTUP_COPY_MULTIPLE in startup_ARMCMx.S */ + /* + .copy.table : + { + . = ALIGN(4); + __copy_table_start__ = .; + LONG (__etext) + LONG (__data_start__) + LONG (__data_end__ - __data_start__) + LONG (__etext2) + LONG (__data2_start__) + LONG (__data2_end__ - __data2_start__) + __copy_table_end__ = .; + } > FLASH + */ + + /* To clear multiple BSS sections, + * uncomment .zero.table section and, + * define __STARTUP_CLEAR_BSS_MULTIPLE in startup_ARMCMx.S */ + /* + .zero.table : + { + . = ALIGN(4); + __zero_table_start__ = .; + LONG (__bss_start__) + LONG (__bss_end__ - __bss_start__) + LONG (__bss2_start__) + LONG (__bss2_end__ - __bss2_start__) + __zero_table_end__ = .; + } > FLASH + */ + + __etext = .; + + __tz_RAM_S = ORIGIN(RAM); + + /* If DTC is used, put the DTC vector table at the start of SRAM. + This avoids memory holes due to 1K alignment required by it. */ + .fsp_dtc_vector_table (NOLOAD) : + { + . = ORIGIN(RAM); + *(.fsp_dtc_vector_table) + } > RAM + + /* Initialized data section. */ + .data : + { + __data_start__ = .; + . = ALIGN(4); + + __Code_In_RAM_Start = .; + + KEEP(*(.code_in_ram*)) + __Code_In_RAM_End = .; + + *(vtable) + /* Don't use *(.data*) because it will place data meant for .data_flash in this section. */ + *(.data.*) + *(.data) + + . = ALIGN(4); + /* preinit data */ + PROVIDE_HIDDEN (__preinit_array_start = .); + KEEP(*(.preinit_array)) + PROVIDE_HIDDEN (__preinit_array_end = .); + + . = ALIGN(4); + /* init data */ + PROVIDE_HIDDEN (__init_array_start = .); + KEEP(*(SORT(.init_array.*))) + KEEP(*(.init_array)) + PROVIDE_HIDDEN (__init_array_end = .); + + + . = ALIGN(4); + /* finit data */ + PROVIDE_HIDDEN (__fini_array_start = .); + KEEP(*(SORT(.fini_array.*))) + KEEP(*(.fini_array)) + PROVIDE_HIDDEN (__fini_array_end = .); + + KEEP(*(.jcr*)) + + . = ALIGN(4); + + /* All data end */ + __data_end__ = .; + + } > RAM AT > FLASH + + . = .; + __dtcm_data_pre_location = LOADADDR(.data) + SIZEOF(.data); + + /* Initialized DTCM data. */ + /* Aligned to FCACHE2 for RA8. */ + .dtcm_data : ALIGN(16) + { + /* Start of DTCM Secure Trustzone region. */ + __tz_DTCM_S = ABSOLUTE(DTCM_START); + + /* Initialized DTCM data start */ + __dtcm_data_start = .; + + KEEP(*(.dtcm_data*)) + + /* Pad to eight byte alignment in case of ECC initialization. Fill zero. */ + . = ALIGN(8); + + /* Initialized DTCM data end */ + __dtcm_data_end = .; + } > DTCM AT > FLASH = 0x00 + + . = __dtcm_data_end; + /* Uninitialized DTCM data. */ + /* ALIGN appears on the left side of the colon because it is being used to assign the VMA directly, as opposed to a right side appearance which would control the LMA. */ + .dtcm_bss ALIGN(8) (NOLOAD) : + { + /* Uninitialized DTCM data start */ + __dtcm_bss_start = .; + + KEEP(*(.dtcm_bss*)) + + /* Pad to eight byte alignment in case of ECC initialization. No fill because of NOLOAD. */ + . = ALIGN(8); + + /* Uninitialized DTCM data end */ + __dtcm_bss_end = .; + + /* + * Start of the DTCM Non-Secure Trustzone region. + * DTCM_NS_START can be used to set a fixed address for non-secure DTCM in secure projects or flat projects. + */ + __tz_DTCM_N = DEFINED(DTCM_NS_START) ? ABSOLUTE(DTCM_NS_START) : ALIGN(__dtcm_bss_end, 8192); + } > DTCM + + /* Addresses exported for DTCM initialization. */ + __dtcm_data_init_start = LOADADDR(.dtcm_data); + __dtcm_data_init_end = LOADADDR(.dtcm_data) + SIZEOF(.dtcm_data); + + ASSERT(ORIGIN(DTCM) % 8 == 0, "DTCM memory region origin must be aligned to 8 bytes.") + ASSERT(LENGTH(DTCM) % 8 == 0, "DTCM memory region length must be a multiple of 8 bytes.") + ASSERT(LOADADDR(.dtcm_bss) == ADDR(.dtcm_bss), ".dtcm_bss has (VMA != LMA) but should be NOLOAD (VMA == LMA).") + ASSERT(LOADADDR(.dtcm_data) % 16 == 0, ".dtcm_data section must be aligned to 16 bytes.") + ASSERT(SIZEOF(.dtcm_data) % 8 == 0, ".dtcm_data section size must be a multiple of 8 bytes.") + ASSERT(LOADADDR(.dtcm_bss) % 8 == 0, ".dtcm_bss section must be aligned to 8 bytes.") + ASSERT(SIZEOF(.dtcm_bss) % 8 == 0, ".dtcm_bss section size must be a multiple of 8 bytes.") + ASSERT(__dtcm_bss_start == __dtcm_data_end, ".dtcm_bss section is not adjacent to .dtcm_data section.") + + /* Restore location counter. */ + /* If DTCM is not present, this will be the address stored in '.' before ALIGN was attempted. */ + /* If DTCM is present, this will be the absolute address that follows the DTCM ROM location. */ + . = (SIZEOF(.dtcm_data) > 0) ? __dtcm_data_init_end : __dtcm_data_pre_location; + + /* TrustZone Secure Gateway Stubs Section */ + + /* Store location counter for SPI non-retentive sections. */ + sgstubs_pre_location = .; + + /* Determine the secure gateway stubs address either by the provided linker variable or the next 1024-byte block. */ + SGSTUBS_LOC = (DEFINED(PROJECT_SECURE) && DEFINED(FLASH_NSC_START)) ? ABSOLUTE(FLASH_NSC_START) : ALIGN(1024); + .gnu.sgstubs SGSTUBS_LOC : ALIGN(1024) + { + __tz_FLASH_C = DEFINED(FLASH_NSC_START) ? ABSOLUTE(FLASH_NSC_START) : __RESERVE_NS_RAM ? ABSOLUTE(FLASH_START + FLASH_LENGTH) : ALIGN(1024); + _start_sg = .; + *(.gnu.sgstubs*) + . = ALIGN(32); + _end_sg = .; + } > FLASH + + __tz_FLASH_N = DEFINED(FLASH_NS_START) ? ABSOLUTE(FLASH_NS_START) : __RESERVE_NS_RAM ? ABSOLUTE(FLASH_START + FLASH_LENGTH) : FLASH_LENGTH < 32768 ? FLASH_LENGTH : ALIGN(32768); + FLASH_NS_IMAGE_START = DEFINED(FLASH_NS_IMAGE_START) ? FLASH_NS_IMAGE_START : __tz_FLASH_N; + + /* Note: There are no secure/non-secure boundaries for QSPI. These symbols are provided for the RA configuration tool. */ + __tz_QSPI_FLASH_S = ORIGIN(QSPI_FLASH); + + /* QSPI_FLASH section to be downloaded via debugger */ + .qspi_flash : + { + __qspi_flash_start__ = .; + KEEP(*(.qspi_flash*)) + KEEP(*(.code_in_qspi*)) + __qspi_flash_end__ = .; + } > QSPI_FLASH + __qspi_flash_code_size__ = __qspi_flash_end__ - __qspi_flash_start__; + + /* QSPI_FLASH non-retentive section, creates a copy in internal flash that can be copied to QSPI */ + __qspi_flash_code_addr__ = sgstubs_pre_location; + .qspi_non_retentive : AT(__qspi_flash_code_addr__) + { + __qspi_non_retentive_start__ = .; + KEEP(*(.qspi_non_retentive*)) + __qspi_non_retentive_end__ = .; + } > QSPI_FLASH + __qspi_non_retentive_size__ = __qspi_non_retentive_end__ - __qspi_non_retentive_start__; + + __qspi_region_max_size__ = 0x4000000; /* Must be the same as defined in MEMORY above */ + __qspi_region_start_address__ = __qspi_flash_start__; + __qspi_region_end_address__ = __qspi_flash_start__ + __qspi_region_max_size__; + + /* Note: There are no secure/non-secure boundaries for QSPI. These symbols are provided for the RA configuration tool. */ + __tz_QSPI_FLASH_N = __qspi_non_retentive_end__; + + /* Support for OctaRAM */ + .OSPI_DEVICE_0_NO_LOAD (NOLOAD): + { + . = ALIGN(4); + __ospi_device_0_start__ = .; + *(.ospi_device_0_no_load*) + . = ALIGN(4); + __ospi_device_0_end__ = .; + } > OSPI_DEVICE_0_RAM + + .OSPI_DEVICE_1_NO_LOAD (NOLOAD): + { + . = ALIGN(4); + __ospi_device_1_start__ = .; + *(.ospi_device_1_no_load*) + . = ALIGN(4); + __ospi_device_1_end__ = .; + } > OSPI_DEVICE_1_RAM + + /* Note: There are no secure/non-secure boundaries for QSPI. These symbols are provided for the RA configuration tool. */ + __tz_OSPI_DEVICE_0_S = ORIGIN(OSPI_DEVICE_0); + + /* OSPI_DEVICE_0 section to be downloaded via debugger */ + .OSPI_DEVICE_0 : + { + __ospi_device_0_start__ = .; + KEEP(*(.ospi_device_0*)) + KEEP(*(.code_in_ospi_device_0*)) + __ospi_device_0_end__ = .; + } > OSPI_DEVICE_0 + __ospi_device_0_code_size__ = __ospi_device_0_end__ - __ospi_device_0_start__; + + /* OSPI_DEVICE_0 non-retentive section, creates a copy in internal flash that can be copied to OSPI */ + __ospi_device_0_code_addr__ = sgstubs_pre_location + (SIZEOF(.qspi_non_retentive)); + .ospi_device_0_non_retentive : AT(__ospi_device_0_code_addr__) + { + __ospi_device_0_non_retentive_start__ = .; + KEEP(*(.ospi_device_0_non_retentive*)) + __ospi_device_0_non_retentive_end__ = .; + } > OSPI_DEVICE_0 + __ospi_device_0_non_retentive_size__ = __ospi_device_0_non_retentive_end__ - __ospi_device_0_non_retentive_start__; + + __ospi_device_0_region_max_size__ = 0x8000000; /* Must be the same as defined in MEMORY above */ + __ospi_device_0_region_start_address__ = __ospi_device_0_start__; + __ospi_device_0_region_end_address__ = __ospi_device_0_start__ + __ospi_device_0_region_max_size__; + + /* Note: There are no secure/non-secure boundaries for OSPI. These symbols are provided for the RA configuration tool. */ + __tz_OSPI_DEVICE_0_N = __ospi_device_0_non_retentive_end__; + + /* Note: There are no secure/non-secure boundaries for OSPI. These symbols are provided for the RA configuration tool. */ + __tz_OSPI_DEVICE_1_S = ORIGIN(OSPI_DEVICE_1); + + /* OSPI_DEVICE_1 section to be downloaded via debugger */ + .OSPI_DEVICE_1 : + { + __ospi_device_1_start__ = .; + KEEP(*(.ospi_device_1*)) + KEEP(*(.code_in_ospi_device_1*)) + __ospi_device_1_end__ = .; + } > OSPI_DEVICE_1 + __ospi_device_1_code_size__ = __ospi_device_1_end__ - __ospi_device_1_start__; + + /* OSPI_DEVICE_1 non-retentive section, creates a copy in internal flash that can be copied to OSPI */ + __ospi_device_1_code_addr__ = sgstubs_pre_location + (SIZEOF(.qspi_non_retentive) + SIZEOF(.ospi_device_0_non_retentive)); + .ospi_device_1_non_retentive : AT(__ospi_device_1_code_addr__) + { + __ospi_device_1_non_retentive_start__ = .; + KEEP(*(.ospi_device_1_non_retentive*)) + __ospi_device_1_non_retentive_end__ = .; + } > OSPI_DEVICE_1 + __ospi_device_1_non_retentive_size__ = __ospi_device_1_non_retentive_end__ - __ospi_device_1_non_retentive_start__; + + __ospi_device_1_region_max_size__ = 0x10000000; /* Must be the same as defined in MEMORY above */ + __ospi_device_1_region_start_address__ = __ospi_device_1_start__; + __ospi_device_1_region_end_address__ = __ospi_device_1_start__ + __ospi_device_1_region_max_size__; + + /* Note: There are no secure/non-secure boundaries for OSPI. These symbols are provided for the RA configuration tool. */ + __tz_OSPI_DEVICE_1_N = __ospi_device_1_non_retentive_end__; + + .noinit (NOLOAD): + { + . = ALIGN(4); + __noinit_start = .; + KEEP(*(.noinit*)) + . = ALIGN(8); + /* Place the FreeRTOS heap here so that the __HeapLimit calculation does not include the freertos heap. */ + KEEP(*(.heap.*)) + __noinit_end = .; + } > RAM + + .bss : + { + . = ALIGN(4); + __bss_start__ = .; + *(.bss*) + *(COMMON) + . = ALIGN(4); + __bss_end__ = .; + } > RAM + + .heap (NOLOAD): + { + . = ALIGN(8); + __HeapBase = .; + /* Place the STD heap here. */ + KEEP(*(.heap)) + __HeapLimit = .; + } > RAM + + /* Stacks are stored in this section. */ + .stack_dummy (NOLOAD): + { + . = ALIGN(8); + __StackLimit = .; + /* Main stack */ + KEEP(*(.stack)) + __StackTop = .; + /* Thread stacks */ + KEEP(*(.stack*)) + __StackTopAll = .; + } > RAM + + PROVIDE(__stack = __StackTopAll); + + /* This symbol represents the end of user allocated RAM. The RAM after this symbol can be used + at run time for things such as ThreadX memory pool allocations. */ + __RAM_segment_used_end__ = ALIGN(__StackTopAll , 4); + + /* RAM_NSC_START can be used to set a fixed address for non-secure callable RAM in secure projects. + * If it is not specified, the address for NSC RAM is the end of RAM aligned to a 1K boundary. + * In flat projects that require non-secure RAM, this variable is set to the start of non-secure RAM. */ + __tz_RAM_C = DEFINED(RAM_NSC_START) ? ABSOLUTE(RAM_NSC_START - RAM_NS_BUFFER_BLOCK_LENGTH) : __RESERVE_NS_RAM ? ABSOLUTE(RAM_NS_BUFFER_BLOCK_START) : ALIGN(__RAM_segment_used_end__, 1024); + + /* RAM_NS_START can be used to set a fixed address for non-secure RAM in secure projects or flat projects. + * RAM_NS_BUFFER_BLOCK_LENGTH is used to allocate non-secure buffers in a flat project. If it is not + * specified, the address for NSC RAM is the end of RAM aligned to an 8K boundary. + * In flat projects that require non-secure RAM, this variable is set to the start of non-secure RAM. */ + __tz_RAM_N = DEFINED(RAM_NS_START) ? ABSOLUTE(RAM_NS_START - RAM_NS_BUFFER_BLOCK_LENGTH) : __RESERVE_NS_RAM ? ABSOLUTE(RAM_NS_BUFFER_BLOCK_START) : ALIGN(__tz_RAM_C, 8192); + + /* Non-secure buffers must be in non-secure RAM. This is primarily used for the EDMAC in flat projects. + * The EDMAC is a non-secure bus master and can only access non-secure RAM. */ + .ns_buffer (NOLOAD): + { + /* Allocate RAM on a 32-byte boundary to help with placement of Ethernet buffers. */ + . = __RESERVE_NS_RAM ? ABSOLUTE(RAM_NS_BUFFER_START & 0xFFFFFFE0) : .; + + KEEP(*(.ns_buffer*)) + } > RAM + + /* Data flash. */ + .data_flash : + { + . = ORIGIN(DATA_FLASH); + __tz_DATA_FLASH_S = .; + __Data_Flash_Start = .; + KEEP(*(.data_flash*)) + __Data_Flash_End = .; + + __tz_DATA_FLASH_N = DEFINED(DATA_FLASH_NS_START) ? ABSOLUTE(DATA_FLASH_NS_START) : __RESERVE_NS_RAM ? ABSOLUTE(DATA_FLASH_START + DATA_FLASH_LENGTH) : ALIGN(1024); + } > DATA_FLASH + + /* Note: There are no secure/non-secure boundaries for SDRAM. These symbols are provided for the RA configuration tool. */ + __tz_SDRAM_S = ORIGIN(SDRAM); + + /* SDRAM */ + .sdram (NOLOAD): + { + __SDRAM_Start = .; + KEEP(*(.sdram*)) + KEEP(*(.frame*)) + __SDRAM_End = .; + } > SDRAM + + /* Note: There are no secure/non-secure boundaries for SDRAM. These symbols are provided for the RA configuration tool. */ + __tz_SDRAM_N = __SDRAM_End; + + /* Note: There are no secure/non-secure boundaries for ID_CODE. These symbols are provided for the RA configuration tool. */ + __tz_ID_CODE_S = ORIGIN(ID_CODE); + + /* Note: There are no secure/non-secure boundaries for ID_CODE. These symbols are provided for the RA configuration tool. + * Set this symbol to the same value as __tz_ID_CODE_S so the RA configuration tool does not split the ID_CODE + * memory region between TrustZone projects. */ + __tz_ID_CODE_N = __tz_ID_CODE_S; + + .id_code : + { + __ID_Code_Start = .; + KEEP(*(.id_code*)) + __ID_Code_End = .; + } > ID_CODE + + /* Symbol required for RA Configuration tool. */ + __tz_OPTION_SETTING_S = ORIGIN(OPTION_SETTING_OFS); + + .option_setting_ofs : + { + __OPTION_SETTING_OFS_Start = .; + KEEP(*(.option_setting_ofs0)) + . = PROJECT_SECURE_OR_FLAT ? __OPTION_SETTING_OFS_Start + 0x04 : __OPTION_SETTING_OFS_Start; + KEEP(*(.option_setting_ofs2)) + . = PROJECT_SECURE_OR_FLAT ? __OPTION_SETTING_OFS_Start + 0x10 : __OPTION_SETTING_OFS_Start; + KEEP(*(.option_setting_dualsel)) + __OPTION_SETTING_OFS_End = .; + } > OPTION_SETTING_OFS = 0xFF + + .option_setting_sas : + { + __OPTION_SETTING_SAS_Start = .; + KEEP(*(.option_setting_sas)) + __OPTION_SETTING_SAS_End = .; + } > OPTION_SETTING_SAS = 0xFF + + /* Symbol required for RA Configuration tool. */ + __tz_OPTION_SETTING_N = ABSOLUTE(OPTION_SETTING_START_NS); + + .option_setting_ns : + { + __OPTION_SETTING_NS_Start = .; + KEEP(*(.option_setting_ofs1)) + . = USE_OPTION_SETTING_NS ? __OPTION_SETTING_NS_Start + 0x04 : __OPTION_SETTING_NS_Start; + KEEP(*(.option_setting_ofs3)) + . = USE_OPTION_SETTING_NS ? __OPTION_SETTING_NS_Start + 0x10 : __OPTION_SETTING_NS_Start; + KEEP(*(.option_setting_banksel)) + . = USE_OPTION_SETTING_NS ? __OPTION_SETTING_NS_Start + 0x40 : __OPTION_SETTING_NS_Start; + KEEP(*(.option_setting_bps0)) + . = USE_OPTION_SETTING_NS ? __OPTION_SETTING_NS_Start + 0x44 : __OPTION_SETTING_NS_Start; + KEEP(*(.option_setting_bps1)) + . = USE_OPTION_SETTING_NS ? __OPTION_SETTING_NS_Start + 0x48 : __OPTION_SETTING_NS_Start; + KEEP(*(.option_setting_bps2)) + . = USE_OPTION_SETTING_NS ? __OPTION_SETTING_NS_Start + 0x4C : __OPTION_SETTING_NS_Start; + KEEP(*(.option_setting_bps3)) + . = USE_OPTION_SETTING_NS ? __OPTION_SETTING_NS_Start + 0x60 : __OPTION_SETTING_NS_Start; + KEEP(*(.option_setting_pbps0)) + . = USE_OPTION_SETTING_NS ? __OPTION_SETTING_NS_Start + 0x64 : __OPTION_SETTING_NS_Start; + KEEP(*(.option_setting_pbps1)) + . = USE_OPTION_SETTING_NS ? __OPTION_SETTING_NS_Start + 0x68 : __OPTION_SETTING_NS_Start; + KEEP(*(.option_setting_pbps2)) + . = USE_OPTION_SETTING_NS ? __OPTION_SETTING_NS_Start + 0x6C : __OPTION_SETTING_NS_Start; + KEEP(*(.option_setting_pbps3)) + __OPTION_SETTING_NS_End = .; + } > OPTION_SETTING = 0xFF + + /* Symbol required for RA Configuration tool. */ + __tz_OPTION_SETTING_S_S = ORIGIN(OPTION_SETTING_S); + + .option_setting_s : + { + __OPTION_SETTING_S_Start = .; + KEEP(*(.option_setting_ofs1_sec)) + . = PROJECT_SECURE_OR_FLAT ? __OPTION_SETTING_S_Start + 0x04 : __OPTION_SETTING_S_Start; + KEEP(*(.option_setting_ofs3_sec)) + . = PROJECT_SECURE_OR_FLAT ? __OPTION_SETTING_S_Start + 0x10 : __OPTION_SETTING_S_Start; + KEEP(*(.option_setting_banksel_sec)) + . = PROJECT_SECURE_OR_FLAT ? __OPTION_SETTING_S_Start + 0x40 : __OPTION_SETTING_S_Start; + KEEP(*(.option_setting_bps_sec0)) + . = PROJECT_SECURE_OR_FLAT ? __OPTION_SETTING_S_Start + 0x44 : __OPTION_SETTING_S_Start; + KEEP(*(.option_setting_bps_sec1)) + . = PROJECT_SECURE_OR_FLAT ? __OPTION_SETTING_S_Start + 0x48 : __OPTION_SETTING_S_Start; + KEEP(*(.option_setting_bps_sec2)) + . = PROJECT_SECURE_OR_FLAT ? __OPTION_SETTING_S_Start + 0x4C : __OPTION_SETTING_S_Start; + KEEP(*(.option_setting_bps_sec3)) + . = PROJECT_SECURE_OR_FLAT ? __OPTION_SETTING_S_Start + 0x60 : __OPTION_SETTING_S_Start; + KEEP(*(.option_setting_pbps_sec0)) + . = PROJECT_SECURE_OR_FLAT ? __OPTION_SETTING_S_Start + 0x64 : __OPTION_SETTING_S_Start; + KEEP(*(.option_setting_pbps_sec1)) + . = PROJECT_SECURE_OR_FLAT ? __OPTION_SETTING_S_Start + 0x68 : __OPTION_SETTING_S_Start; + KEEP(*(.option_setting_pbps_sec2)) + . = PROJECT_SECURE_OR_FLAT ? __OPTION_SETTING_S_Start + 0x6C : __OPTION_SETTING_S_Start; + KEEP(*(.option_setting_pbps_sec3)) + . = PROJECT_SECURE_OR_FLAT ? __OPTION_SETTING_S_Start + 0x80 : __OPTION_SETTING_S_Start; + KEEP(*(.option_setting_ofs1_sel)) + . = PROJECT_SECURE_OR_FLAT ? __OPTION_SETTING_S_Start + 0x84 : __OPTION_SETTING_S_Start; + KEEP(*(.option_setting_ofs3_sel)) + . = PROJECT_SECURE_OR_FLAT ? __OPTION_SETTING_S_Start + 0x90 : __OPTION_SETTING_S_Start; + KEEP(*(.option_setting_banksel_sel)) + . = PROJECT_SECURE_OR_FLAT ? __OPTION_SETTING_S_Start + 0xC0 : __OPTION_SETTING_S_Start; + KEEP(*(.option_setting_bps_sel0)) + . = PROJECT_SECURE_OR_FLAT ? __OPTION_SETTING_S_Start + 0xC4 : __OPTION_SETTING_S_Start; + KEEP(*(.option_setting_bps_sel1)) + . = PROJECT_SECURE_OR_FLAT ? __OPTION_SETTING_S_Start + 0xC8 : __OPTION_SETTING_S_Start; + KEEP(*(.option_setting_bps_sel2)) + . = PROJECT_SECURE_OR_FLAT ? __OPTION_SETTING_S_Start + 0xCC : __OPTION_SETTING_S_Start; + KEEP(*(.option_setting_bps_sel3)) + __OPTION_SETTING_S_End = .; + } > OPTION_SETTING_S = 0xFF + + /* Symbol required for RA Configuration tool. */ + __tz_OPTION_SETTING_S_N = __OPTION_SETTING_S_End; +} diff --git a/hw/bsp/ra/boards/uno_r4/script/memory_regions.ld b/hw/bsp/ra/boards/uno_r4/script/memory_regions.ld new file mode 100644 index 000000000..22775395c --- /dev/null +++ b/hw/bsp/ra/boards/uno_r4/script/memory_regions.ld @@ -0,0 +1,25 @@ + + /* generated memory regions file - do not edit */ + RAM_START = 0x20000000; + RAM_LENGTH = 0x8000; + FLASH_START = 0x00000000; + FLASH_LENGTH = 0x40000; + DATA_FLASH_START = 0x40100000; + DATA_FLASH_LENGTH = 0x2000; + OPTION_SETTING_START = 0x00000000; + OPTION_SETTING_LENGTH = 0x0; + OPTION_SETTING_S_START = 0x80000000; + OPTION_SETTING_S_LENGTH = 0x0; + ID_CODE_START = 0x01010018; + ID_CODE_LENGTH = 0x20; + SDRAM_START = 0x80010000; + SDRAM_LENGTH = 0x0; + QSPI_FLASH_START = 0x60000000; + QSPI_FLASH_LENGTH = 0x0; + OSPI_DEVICE_0_START = 0x80020000; + OSPI_DEVICE_0_LENGTH = 0x0; + OSPI_DEVICE_1_START = 0x80030000; + OSPI_DEVICE_1_LENGTH = 0x0; + +/* Uno R4 has bootloader */ +FLASH_IMAGE_START = 0x4000; diff --git a/hw/bsp/ra/boards/uno_r4/smart_configurator/configuration.xml b/hw/bsp/ra/boards/uno_r4/smart_configurator/configuration.xml new file mode 100644 index 000000000..49603d5bf --- /dev/null +++ b/hw/bsp/ra/boards/uno_r4/smart_configurator/configuration.xml @@ -0,0 +1,205 @@ + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + Board Support Package Common Files + Renesas.RA.5.6.0.pack + + + I/O Port + Renesas.RA.5.6.0.pack + + + Arm CMSIS Version 6 - Core (M) + Arm.CMSIS6.6.1.0+fsp.5.6.0.pack + + + Custom Board Support Files + Renesas.RA_board_custom.5.6.0.pack + + + Board support package for R7FA4M1AB3CNE + Renesas.RA_mcu_ra4m1.5.6.0.pack + + + Board support package for RA4M1 + Renesas.RA_mcu_ra4m1.5.6.0.pack + + + Board support package for RA4M1 - FSP Data + Renesas.RA_mcu_ra4m1.5.6.0.pack + + + Board support package for RA4M1 - Events + Renesas.RA_mcu_ra4m1.5.6.0.pack + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + diff --git a/hw/bsp/ra/boards/uno_r4/uno_r4.ld b/hw/bsp/ra/boards/uno_r4/uno_r4.ld deleted file mode 100644 index 45f11dfb1..000000000 --- a/hw/bsp/ra/boards/uno_r4/uno_r4.ld +++ /dev/null @@ -1,25 +0,0 @@ -RAM_START = 0x20000000; -RAM_LENGTH = 0x8000; -FLASH_START = 0x00000000; -FLASH_LENGTH = 0x40000; -DATA_FLASH_START = 0x40100000; -DATA_FLASH_LENGTH = 0x2000; -OPTION_SETTING_START = 0x00000000; -OPTION_SETTING_LENGTH = 0x0; -OPTION_SETTING_S_START = 0x80000000; -OPTION_SETTING_S_LENGTH = 0x0; -ID_CODE_START = 0x01010018; -ID_CODE_LENGTH = 0x20; -SDRAM_START = 0x80010000; -SDRAM_LENGTH = 0x0; -QSPI_FLASH_START = 0x60000000; -QSPI_FLASH_LENGTH = 0x0; -OSPI_DEVICE_0_START = 0x80020000; -OSPI_DEVICE_0_LENGTH = 0x0; -OSPI_DEVICE_1_START = 0x80030000; -OSPI_DEVICE_1_LENGTH = 0x0; - -/* Uno R4 has bootloader */ -FLASH_IMAGE_START = 0x4000; - -INCLUDE fsp.ld diff --git a/hw/bsp/ra/family.cmake b/hw/bsp/ra/family.cmake index 3b35d2e71..00907c598 100644 --- a/hw/bsp/ra/family.cmake +++ b/hw/bsp/ra/family.cmake @@ -4,7 +4,7 @@ if (NOT BOARD) message(FATAL_ERROR "BOARD not specified") endif () -set(CMSIS_DIR ${TOP}/lib/CMSIS_5) +set(CMSIS_DIR ${TOP}/lib/CMSIS_6) set(FSP_RA ${TOP}/hw/mcu/renesas/fsp/ra/fsp) # include board specific @@ -59,18 +59,19 @@ function(add_board_target BOARD_TARGET) update_board(${BOARD_TARGET}) if (NOT DEFINED LD_FILE_${CMAKE_C_COMPILER_ID}) - set(LD_FILE_GNU ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/linker/gcc/${MCU_VARIANT}.ld) + set(LD_FILE_GNU ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/boards/${BOARD}/script/fsp.ld) + #set(LD_FILE_GNU ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/linker/gcc/${MCU_VARIANT}.ld) endif () if (CMAKE_C_COMPILER_ID STREQUAL "GNU") target_link_options(${BOARD_TARGET} PUBLIC # linker file "LINKER:--script=${LD_FILE_GNU}" - -L${CMAKE_CURRENT_FUNCTION_LIST_DIR}/linker/gcc + #-L${CMAKE_CURRENT_FUNCTION_LIST_DIR}/linker/gcc + -L${CMAKE_CURRENT_FUNCTION_LIST_DIR}/boards/${BOARD}/script + -Wl,--defsym=end=__bss_end__ -nostartfiles - # nanolib - --specs=nano.specs - --specs=nosys.specs + --specs=nano.specs --specs=nosys.specs ) elseif (CMAKE_C_COMPILER_ID STREQUAL "IAR") target_link_options(${BOARD_TARGET} PUBLIC diff --git a/tools/get_deps.py b/tools/get_deps.py index 58709414c..c8459c1f1 100755 --- a/tools/get_deps.py +++ b/tools/get_deps.py @@ -62,7 +62,7 @@ deps_optional = { 'fe9133fc513b82cc3dc62c67cb51f2339cf29ef7', 'rp2040'], 'hw/mcu/renesas/fsp': ['https://github.com/renesas/fsp.git', - 'd52e5a6a59b7c638da860c2bb309b6e78e752ff8', + 'edcc97d684b6f716728a60d7a6fea049d9870bd6', 'ra'], 'hw/mcu/renesas/rx': ['https://github.com/kkitayam/rx_device.git', '706b4e0cf485605c32351e2f90f5698267996023', @@ -194,13 +194,16 @@ deps_optional = { '77c4095087e5ed2c548ec9058e655d0b8757663b', 'ch32f20x'], 'lib/CMSIS_5': ['https://github.com/ARM-software/CMSIS_5.git', - '20285262657d1b482d132d20d755c8c330d55c1f', - 'imxrt kinetis_k32l2 kinetis_kl lpc51 lpc54 lpc55 mcx mm32 msp432e4 nrf ra saml2x ' + '2b7495b8535bdcb306dac29b9ded4cfb679d7e5c', + 'imxrt kinetis_k32l2 kinetis_kl lpc51 lpc54 lpc55 mcx mm32 msp432e4 nrf saml2x ' 'lpc11 lpc13 lpc15 lpc17 lpc18 lpc40 lpc43 ' 'stm32c0 stm32f0 stm32f1 stm32f2 stm32f3 stm32f4 stm32f7 stm32g0 stm32g4 stm32h5 ' 'stm32h7 stm32l0 stm32l1 stm32l4 stm32l5 stm32u5 stm32wb ' 'sam3x samd11 samd21 samd51 samd5x_e5x same5x same7x saml2x samg ' 'tm4c '], + 'lib/CMSIS_6': ['https://github.com/ARM-software/CMSIS_6.git', + 'b0bbb0423b278ca632cfe1474eb227961d835fd2', + 'ra'], 'lib/sct_neopixel': ['https://github.com/gsteiert/sct_neopixel.git', 'e73e04ca63495672d955f9268e003cffe168fcd8', 'lpc55'], -- cgit v1.3.1 From ab9472f5848faac26d6c6160f78b8a82661c6ff6 Mon Sep 17 00:00:00 2001 From: hathach Date: Wed, 25 Dec 2024 12:17:42 +0700 Subject: update doc, bump up release 0.18.0 revert OPT_MCU_RAXXX value back to 1403 --- docs/info/changelog.rst | 55 ++++++++++++++++++++++++++++++++++++++ docs/reference/dependencies.rst | 14 ++++++---- docs/reference/getting_started.rst | 23 +++++++++++++--- library.json | 2 +- repository.yml | 3 ++- src/tusb_option.h | 4 +-- tools/make_release.py | 2 +- 7 files changed, 90 insertions(+), 13 deletions(-) (limited to 'tools') diff --git a/docs/info/changelog.rst b/docs/info/changelog.rst index d11e1134a..a69705bde 100644 --- a/docs/info/changelog.rst +++ b/docs/info/changelog.rst @@ -2,6 +2,61 @@ Changelog ********* +0.18.0 +====== + +General +------- + +- New MCUs: + + - Add esp32p4 OTG highspeed support + - Add stm32 u0, c0, h7rs + +- Better support dcache, make sure all usb-transferred buffer are cache line aligned and occupy full cache line +- Build ARM IAR with CircleCI +- Improve HIL with dual/host_info_to_device_cdc optional for pico/pico2, enable dwc2 dma test + + +API Changes +----------- + +- Change signature of ``tusb_init(rhport, tusb_rhport_init_t*)``, tusb_init(void) is now deprecated but still available for backward compatibility +- Add new ``tusb_int_handler(rhport, in_isr)`` +- Add time-related APIs: ``tusb_time_millis_api()`` and ``tusb_time_delay_ms_api()`` for non-RTOS, required for some ports/configuration +- New configuration macros: + + - ``CFG_TUD/TUH_MEM_DCACHE_ENABLE`` enable data cache sync for endpoint buffer + - ``CFG_TUD/TUH_MEM_DCACHE_LINE_SIZE`` set cache line size + - ``CFG_TUD/TUH_DWC2_SLAVE_ENABLE`` enable dwc2 slave mode + - ``CFG_TUD/TUH_DWC2_DMA_ENABLE`` enable dwc2 dma mode + + +Controller Driver (DCD & HCD) +----------------------------- + +- DWC2 + - Add DMA support for both device and host controller + - Add host driver support including: full/high speed, control/bulk/interrupt (CBI) transfer, split CBI i.e FS/LS attached via highspeed hub, hub support + +- RP2: implement dcd_edpt_iso_alloc() and dcd_edpt_iso_activate() for isochronous endpoint +- iMXRT1170 support M4 core + +Device Stack +------------ + +- Vendor Fix class reset +- NCM fix recursions in tud_network_recv_renew() +- Audio fix align issue of _audiod_fct.alt_setting +- UVC support format frame based +- Change dcd_dcache_() return type from void to bool +- HID add Usage Table for Physical Input Device Page (0x0F) + +Host Stack +---------- + +- Fix an duplicated attach issue which cause USBH Defer Attach until current enumeration complete message + 0.17.0 ====== diff --git a/docs/reference/dependencies.rst b/docs/reference/dependencies.rst index 65ee31f22..e124466da 100644 --- a/docs/reference/dependencies.rst +++ b/docs/reference/dependencies.rst @@ -4,9 +4,9 @@ Dependencies MCU low-level peripheral driver and external libraries for building TinyUSB examples -======================================== ============================================================== ======================================== ========================================================================================================================================================================================================================================================================================================================== +======================================== ============================================================== ======================================== ==================================================================================================================================================================================================================================================================================================================================== Local Path Repo Commit Required by -======================================== ============================================================== ======================================== ========================================================================================================================================================================================================================================================================================================================== +======================================== ============================================================== ======================================== ==================================================================================================================================================================================================================================================================================================================================== hw/mcu/allwinner https://github.com/hathach/allwinner_driver.git 8e5e89e8e132c0fd90e72d5422e5d3d68232b756 fc100s hw/mcu/analog/max32 https://github.com/analogdevicesinc/msdk.git b20b398d3e5e2007594e54a74ba3d2a2e50ddd75 max32650 max32666 max32690 max78002 hw/mcu/bridgetek/ft9xx/ft90x-sdk https://github.com/BRTSG-FOSS/ft90x-sdk.git 91060164afe239fcb394122e8bf9eb24d3194eb1 brtmm90x @@ -20,10 +20,11 @@ hw/mcu/nuvoton https://github.com/majbthrd/nuc_driver hw/mcu/nxp/lpcopen https://github.com/hathach/nxp_lpcopen.git b41cf930e65c734d8ec6de04f1d57d46787c76ae lpc11 lpc13 lpc15 lpc17 lpc18 lpc40 lpc43 hw/mcu/nxp/mcux-sdk https://github.com/hathach/mcux-sdk.git 144f1eb7ea8c06512e12f12b27383601c0272410 kinetis_k kinetis_k32l2 kinetis_kl lpc51 lpc54 lpc55 mcx imxrt hw/mcu/raspberry_pi/Pico-PIO-USB https://github.com/sekigon-gonnoc/Pico-PIO-USB.git fe9133fc513b82cc3dc62c67cb51f2339cf29ef7 rp2040 -hw/mcu/renesas/fsp https://github.com/renesas/fsp.git d52e5a6a59b7c638da860c2bb309b6e78e752ff8 ra +hw/mcu/renesas/fsp https://github.com/renesas/fsp.git edcc97d684b6f716728a60d7a6fea049d9870bd6 ra hw/mcu/renesas/rx https://github.com/kkitayam/rx_device.git 706b4e0cf485605c32351e2f90f5698267996023 rx hw/mcu/silabs/cmsis-dfp-efm32gg12b https://github.com/cmsis-packs/cmsis-dfp-efm32gg12b.git f1c31b7887669cb230b3ea63f9b56769078960bc efm32 hw/mcu/sony/cxd56/spresense-exported-sdk https://github.com/sonydevworld/spresense-exported-sdk.git 2ec2a1538362696118dc3fdf56f33dacaf8f4067 spresense +hw/mcu/st/cmsis_device_c0 https://github.com/STMicroelectronics/cmsis_device_c0.git fb56b1b70c73b74eacda2a4bcc36886444364ab3 stm32c0 hw/mcu/st/cmsis_device_f0 https://github.com/STMicroelectronics/cmsis_device_f0.git 2fc25ee22264bc27034358be0bd400b893ef837e stm32f0 hw/mcu/st/cmsis_device_f1 https://github.com/STMicroelectronics/cmsis_device_f1.git 6601104a6397299b7304fd5bcd9a491f56cb23a6 stm32f1 hw/mcu/st/cmsis_device_f2 https://github.com/STMicroelectronics/cmsis_device_f2.git 182fcb3681ce116816feb41b7764f1b019ce796f stm32f2 @@ -40,6 +41,8 @@ hw/mcu/st/cmsis_device_l4 https://github.com/STMicroelectronics/ hw/mcu/st/cmsis_device_l5 https://github.com/STMicroelectronics/cmsis_device_l5.git d922865fc0326a102c26211c44b8e42f52c1e53d stm32l5 hw/mcu/st/cmsis_device_u5 https://github.com/STMicroelectronics/cmsis_device_u5.git 5ad9797c54ec3e55eff770fc9b3cd4a1aefc1309 stm32u5 hw/mcu/st/cmsis_device_wb https://github.com/STMicroelectronics/cmsis_device_wb.git 9c5d1920dd9fabbe2548e10561d63db829bb744f stm32wb +hw/mcu/st/stm32-mfxstm32l152 https://github.com/STMicroelectronics/stm32-mfxstm32l152.git 7f4389efee9c6a655b55e5df3fceef5586b35f9b stm32h7 +hw/mcu/st/stm32c0xx_hal_driver https://github.com/STMicroelectronics/stm32c0xx_hal_driver.git 41253e2f1d7ae4a4d0c379cf63f5bcf71fcf8eb3 stm32c0 hw/mcu/st/stm32f0xx_hal_driver https://github.com/STMicroelectronics/stm32f0xx_hal_driver.git 0e95cd88657030f640a11e690a8a5186c7712ea5 stm32f0 hw/mcu/st/stm32f1xx_hal_driver https://github.com/STMicroelectronics/stm32f1xx_hal_driver.git 1dd9d3662fb7eb2a7f7d3bc0a4c1dc7537915a29 stm32f1 hw/mcu/st/stm32f2xx_hal_driver https://github.com/STMicroelectronics/stm32f2xx_hal_driver.git c75ace9b908a9aca631193ebf2466963b8ea33d0 stm32f2 @@ -61,9 +64,10 @@ hw/mcu/wch/ch32f20x https://github.com/openwch/ch32f20x.gi hw/mcu/wch/ch32v103 https://github.com/openwch/ch32v103.git 7578cae0b21f86dd053a1f781b2fc6ab99d0ec17 ch32v10x hw/mcu/wch/ch32v20x https://github.com/openwch/ch32v20x.git c4c38f507e258a4e69b059ccc2dc27dde33cea1b ch32v20x hw/mcu/wch/ch32v307 https://github.com/openwch/ch32v307.git 184f21b852cb95eed58e86e901837bc9fff68775 ch32v307 -lib/CMSIS_5 https://github.com/ARM-software/CMSIS_5.git 20285262657d1b482d132d20d755c8c330d55c1f imxrt kinetis_k32l2 kinetis_kl lpc51 lpc54 lpc55 mcx mm32 msp432e4 nrf ra saml2xlpc11 lpc13 lpc15 lpc17 lpc18 lpc40 lpc43stm32f0 stm32f1 stm32f2 stm32f3 stm32f4 stm32f7 stm32g0 stm32g4 stm32h5stm32h7 stm32l0 stm32l1 stm32l4 stm32l5 stm32u5 stm32wbsam3x samd11 samd21 samd51 samd5x_e5x same5x same7x saml2x samgtm4c +lib/CMSIS_5 https://github.com/ARM-software/CMSIS_5.git 2b7495b8535bdcb306dac29b9ded4cfb679d7e5c imxrt kinetis_k32l2 kinetis_kl lpc51 lpc54 lpc55 mcx mm32 msp432e4 nrf saml2x lpc11 lpc13 lpc15 lpc17 lpc18 lpc40 lpc43 stm32c0 stm32f0 stm32f1 stm32f2 stm32f3 stm32f4 stm32f7 stm32g0 stm32g4 stm32h5 stm32h7 stm32l0 stm32l1 stm32l4 stm32l5 stm32u5 stm32wb sam3x samd11 samd21 samd51 samd5x_e5x same5x same7x saml2x samg tm4c +lib/CMSIS_6 https://github.com/ARM-software/CMSIS_6.git b0bbb0423b278ca632cfe1474eb227961d835fd2 ra lib/FreeRTOS-Kernel https://github.com/FreeRTOS/FreeRTOS-Kernel.git cc0e0707c0c748713485b870bb980852b210877f all lib/lwip https://github.com/lwip-tcpip/lwip.git 159e31b689577dbf69cf0683bbaffbd71fa5ee10 all lib/sct_neopixel https://github.com/gsteiert/sct_neopixel.git e73e04ca63495672d955f9268e003cffe168fcd8 lpc55 tools/uf2 https://github.com/microsoft/uf2.git c594542b2faa01cc33a2b97c9fbebc38549df80a all -======================================== ============================================================== ======================================== ========================================================================================================================================================================================================================================================================================================================== +======================================== ============================================================== ======================================== ==================================================================================================================================================================================================================================================================================================================================== diff --git a/docs/reference/getting_started.rst b/docs/reference/getting_started.rst index ac4ab6392..671e9fb11 100644 --- a/docs/reference/getting_started.rst +++ b/docs/reference/getting_started.rst @@ -10,7 +10,7 @@ It is relatively simple to incorporate tinyusb to your project * Copy or ``git submodule`` this repo into your project in a subfolder. Let's say it is *your_project/tinyusb* * Add all the .c in the ``tinyusb/src`` folder to your project * Add *your_project/tinyusb/src* to your include path. Also make sure your current include path also contains the configuration file tusb_config.h. -* Make sure all required macros are all defined properly in tusb_config.h (configure file in demo application is sufficient, but you need to add a few more such as CFG_TUSB_MCU, CFG_TUSB_OS since they are passed by IDE/compiler to maintain a unique configure for all boards). +* Make sure all required macros are all defined properly in tusb_config.h (configure file in demo application is sufficient, but you need to add a few more such as ``CFG_TUSB_MCU``, ``CFG_TUSB_OS`` since they are passed by IDE/compiler to maintain a unique configure for all boards). * If you use the device stack, make sure you have created/modified usb descriptors for your own need. Ultimately you need to implement all **tud descriptor** callbacks for the stack to work. * Add tusb_init(rhport, role) call to your reset initialization code. * Call ``tusb_int_handler(rhport, in_isr)`` in your USB IRQ Handler @@ -20,8 +20,17 @@ It is relatively simple to incorporate tinyusb to your project .. code-block:: int main(void) { - your_init_code(); - tusb_init(0, TUSB_ROLE_DEVICE); // initialize device stack on roothub port 0 + tusb_rhport_init_t dev_init = { + .role = TUSB_ROLE_DEVICE, + .speed = TUSB_SPEED_AUTO + }; + tusb_init(0, &dev_init); // initialize device stack on roothub port 0 + + tusb_rhport_init_t host_init = { + .role = TUSB_ROLE_HOST, + .speed = TUSB_SPEED_AUTO + }; + tusb_init(1, &host_init); // initialize host stack on roothub port 1 while(1) { // the mainloop your_application_code(); @@ -30,6 +39,14 @@ It is relatively simple to incorporate tinyusb to your project } } + void USB0_IRQHandler(void) { + tusb_int_handler(0, true); + } + + void USB1_IRQHandler(void) { + tusb_int_handler(1, true); + } + Examples -------- diff --git a/library.json b/library.json index c945d4b52..f1bfd6387 100644 --- a/library.json +++ b/library.json @@ -1,6 +1,6 @@ { "name": "TinyUSB", - "version": "0.17.0", + "version": "0.18.0", "description": "TinyUSB is an open-source cross-platform USB Host/Device stack for embedded system, designed to be memory-safe with no dynamic allocation and thread-safe with all interrupt events are deferred then handled in the non-ISR task function.", "keywords": "usb, host, device", "repository": diff --git a/repository.yml b/repository.yml index df7895e84..31c9eddc5 100644 --- a/repository.yml +++ b/repository.yml @@ -15,5 +15,6 @@ repo.versions: "0.15.0": "0.15.0" "0.16.0": "0.16.0" "0.17.0": "0.17.0" - "0-latest": "0.17.0" + "0.18.0": "0.18.0" + "0-latest": "0.18.0" "0-dev": "0.0.0" diff --git a/src/tusb_option.h b/src/tusb_option.h index 8b1a6af01..86cb6d046 100644 --- a/src/tusb_option.h +++ b/src/tusb_option.h @@ -31,7 +31,7 @@ // Version is release as major.minor.revision eg 1.0.0 #define TUSB_VERSION_MAJOR 0 -#define TUSB_VERSION_MINOR 17 +#define TUSB_VERSION_MINOR 18 #define TUSB_VERSION_REVISION 0 #define TUSB_VERSION_NUMBER (TUSB_VERSION_MAJOR * 10000 + TUSB_VERSION_MINOR * 100 + TUSB_VERSION_REVISION) @@ -152,7 +152,7 @@ #define OPT_MCU_RX63X 1400 ///< Renesas RX63N/631 #define OPT_MCU_RX65X 1401 ///< Renesas RX65N/RX651 #define OPT_MCU_RX72N 1402 ///< Renesas RX72N -#define OPT_MCU_RAXXX 1420 ///< Renesas RA generic +#define OPT_MCU_RAXXX 1403 ///< Renesas RA generic // Mind Motion #define OPT_MCU_MM32F327X 1500 ///< Mind Motion MM32F327 diff --git a/tools/make_release.py b/tools/make_release.py index 92c75baf9..c1caf3300 100755 --- a/tools/make_release.py +++ b/tools/make_release.py @@ -2,7 +2,7 @@ import re import gen_doc -version = '0.17.0' +version = '0.18.0' print('version {}'.format(version)) ver_id = version.split('.') -- cgit v1.3.1 From 6a36c74b10b25f1455d83ba473fff52a9dbcc6d2 Mon Sep 17 00:00:00 2001 From: hathach Date: Fri, 27 Dec 2024 09:11:09 +0700 Subject: embed metadata to family.c and board.h to generate supported boards doc --- docs/info/changelog.rst | 2 - docs/reference/boards.rst | 315 +++++++++++++++++++++ docs/reference/index.rst | 3 +- .../broadcom_32bit/boards/raspberrypi_zero/board.h | 5 + hw/bsp/broadcom_32bit/family.c | 4 + .../broadcom_64bit/boards/raspberrypi_cm4/board.h | 5 + .../boards/raspberrypi_zero2/board.h | 5 + hw/bsp/broadcom_64bit/family.c | 4 + hw/bsp/brtmm90x/boards/mm900evxb/board.h | 5 + hw/bsp/brtmm90x/family.c | 4 + hw/bsp/ch32f20x/boards/ch32f205r-r0/board.h | 5 + hw/bsp/ch32f20x/family.c | 4 + hw/bsp/ch32v10x/boards/ch32v103r_r1_1v0/board.h | 5 + hw/bsp/ch32v10x/family.c | 4 + hw/bsp/ch32v20x/boards/ch32v203c_r0_1v0/board.h | 5 + hw/bsp/ch32v20x/boards/ch32v203g_r0_1v0/board.h | 5 + hw/bsp/ch32v20x/boards/nanoch32v203/board.h | 5 + hw/bsp/ch32v20x/family.c | 4 + hw/bsp/ch32v307/boards/ch32v307v_r1_1v0/board.h | 5 + hw/bsp/ch32v307/family.c | 4 + hw/bsp/da1469x/boards/da14695_dk_usb/board.h | 5 + hw/bsp/da1469x/boards/da1469x_dk_pro/board.h | 5 + hw/bsp/da1469x/family.c | 4 + .../boards/adafruit_feather_esp32_v2/board.h | 5 + .../boards/adafruit_feather_esp32s2/board.h | 5 + .../boards/adafruit_feather_esp32s3/board.h | 5 + .../boards/adafruit_magtag_29gray/board.h | 5 + .../boards/adafruit_metro_esp32s2/board.h | 5 + hw/bsp/espressif/boards/espressif_addax_1/board.h | 5 + .../espressif/boards/espressif_c3_devkitc/board.h | 5 + .../espressif/boards/espressif_c6_devkitc/board.h | 5 + hw/bsp/espressif/boards/espressif_kaluga_1/board.h | 5 + .../boards/espressif_p4_function_ev/board.h | 5 + .../espressif/boards/espressif_s2_devkitc/board.h | 5 + .../espressif/boards/espressif_s3_devkitc/board.h | 5 + .../espressif/boards/espressif_s3_devkitm/board.h | 5 + hw/bsp/espressif/boards/espressif_saola_1/board.h | 5 + hw/bsp/espressif/boards/family.c | 4 + hw/bsp/f1c100s/boards/f1c100s/board.h | 5 + hw/bsp/f1c100s/family.c | 4 + hw/bsp/fomu/boards/fomu/board.h | 5 + hw/bsp/fomu/family.c | 4 + hw/bsp/gd32vf103/boards/sipeed_longan_nano/board.h | 5 + hw/bsp/gd32vf103/family.c | 4 + hw/bsp/imxrt/boards/metro_m7_1011/board.h | 5 + hw/bsp/imxrt/boards/metro_m7_1011_sd/board.h | 5 + hw/bsp/imxrt/boards/mimxrt1010_evk/board.h | 5 + hw/bsp/imxrt/boards/mimxrt1015_evk/board.h | 5 + hw/bsp/imxrt/boards/mimxrt1020_evk/board.h | 5 + hw/bsp/imxrt/boards/mimxrt1024_evk/board.h | 5 + hw/bsp/imxrt/boards/mimxrt1050_evkb/board.h | 5 + hw/bsp/imxrt/boards/mimxrt1060_evk/board.h | 5 + hw/bsp/imxrt/boards/mimxrt1064_evk/board.h | 5 + hw/bsp/imxrt/boards/mimxrt1170_evkb/board.h | 5 + hw/bsp/imxrt/boards/teensy_40/board.h | 5 +- hw/bsp/imxrt/boards/teensy_41/board.h | 5 +- hw/bsp/imxrt/family.c | 4 + hw/bsp/kinetis_k/boards/frdm_k64f/board.h | 5 + hw/bsp/kinetis_k/boards/teensy_35/board.h | 5 + hw/bsp/kinetis_k/family.c | 4 + hw/bsp/kinetis_k32l2/boards/frdm_k32l2a4s/board.h | 4 + hw/bsp/kinetis_k32l2/boards/frdm_k32l2b/board.h | 4 + hw/bsp/kinetis_k32l2/boards/kuiic/board.h | 4 + hw/bsp/kinetis_k32l2/family.c | 4 + hw/bsp/kinetis_kl/boards/frdm_kl25z/board.h | 5 + hw/bsp/kinetis_kl/family.c | 4 + hw/bsp/lpc11/boards/lpcxpresso11u37/board.h | 5 + hw/bsp/lpc11/boards/lpcxpresso11u68/board.h | 5 + hw/bsp/lpc11/family.c | 4 + hw/bsp/lpc13/boards/lpcxpresso1347/board.h | 5 + hw/bsp/lpc13/family.c | 4 + hw/bsp/lpc15/boards/lpcxpresso1549/board.h | 5 + hw/bsp/lpc15/family.c | 4 + hw/bsp/lpc17/boards/lpcxpresso1769/board.h | 5 + hw/bsp/lpc17/boards/mbed1768/board.h | 5 + hw/bsp/lpc17/family.c | 4 + hw/bsp/lpc18/boards/lpcxpresso18s37/board.h | 5 + hw/bsp/lpc18/boards/mcb1800/board.h | 5 + hw/bsp/lpc18/family.c | 4 + hw/bsp/lpc40/boards/ea4088_quickstart/board.h | 5 + hw/bsp/lpc40/family.c | 4 + hw/bsp/lpc43/boards/ea4357/board.h | 5 + hw/bsp/lpc43/boards/lpcxpresso43s67/board.h | 5 + hw/bsp/lpc43/family.c | 4 + hw/bsp/lpc51/boards/lpcxpresso51u68/board.h | 5 + hw/bsp/lpc51/family.c | 4 + hw/bsp/lpc54/boards/lpcxpresso54114/board.h | 5 + hw/bsp/lpc54/boards/lpcxpresso54608/board.h | 5 + hw/bsp/lpc54/boards/lpcxpresso54628/board.h | 5 + hw/bsp/lpc54/family.c | 4 + hw/bsp/lpc55/boards/double_m33_express/board.h | 5 + hw/bsp/lpc55/boards/lpcxpresso55s28/board.h | 5 + hw/bsp/lpc55/boards/lpcxpresso55s69/board.h | 5 + hw/bsp/lpc55/boards/mcu_link/board.h | 5 + hw/bsp/lpc55/family.c | 4 + hw/bsp/max32650/boards/max32650evkit/board.h | 5 + hw/bsp/max32650/boards/max32650fthr/board.h | 5 + hw/bsp/max32650/boards/max32651evkit/board.h | 5 + hw/bsp/max32650/family.c | 4 + hw/bsp/max32666/boards/max32666evkit/board.h | 5 + hw/bsp/max32666/boards/max32666fthr/board.h | 5 + hw/bsp/max32666/family.c | 4 + hw/bsp/max32690/boards/apard32690/board.h | 5 + hw/bsp/max32690/boards/max32690evkit/board.h | 5 + hw/bsp/max32690/family.c | 4 + hw/bsp/max78002/boards/max78002evkit/board.h | 5 + hw/bsp/max78002/family.c | 4 + hw/bsp/mcx/boards/frdm_mcxa153/board.h | 5 + hw/bsp/mcx/boards/frdm_mcxn947/board.h | 5 + hw/bsp/mcx/boards/mcxn947brk/board.h | 5 + hw/bsp/mcx/family.c | 4 + hw/bsp/mm32/boards/mm32f327x_mb39/board.h | 5 + hw/bsp/mm32/boards/mm32f327x_pitaya_lite/board.h | 5 + hw/bsp/mm32/family.c | 4 + hw/bsp/msp430/boards/msp_exp430f5529lp/board.h | 5 + hw/bsp/msp430/family.c | 4 + hw/bsp/msp432e4/boards/msp_exp432e401y/board.h | 5 + hw/bsp/msp432e4/family.c | 4 + hw/bsp/nrf/boards/adafruit_clue/board.h | 5 + hw/bsp/nrf/boards/arduino_nano33_ble/board.h | 5 + .../nrf/boards/circuitplayground_bluefruit/board.h | 5 + hw/bsp/nrf/boards/feather_nrf52840_express/board.h | 5 + hw/bsp/nrf/boards/feather_nrf52840_sense/board.h | 5 + hw/bsp/nrf/boards/itsybitsy_nrf52840/board.h | 5 + hw/bsp/nrf/boards/pca10056/board.h | 5 + hw/bsp/nrf/boards/pca10059/board.h | 5 + hw/bsp/nrf/boards/pca10095/board.h | 5 + hw/bsp/nrf/boards/pca10100/board.h | 5 + hw/bsp/nrf/family.c | 4 + hw/bsp/pic32mz/boards/olimex_emz64/board.h | 43 +++ hw/bsp/pic32mz/boards/olimex_hmz144/board.h | 43 +++ hw/bsp/pic32mz/family.c | 4 + hw/bsp/ra/boards/portenta_c33/board.h | 5 + hw/bsp/ra/boards/ra2a1_ek/board.h | 5 + hw/bsp/ra/boards/ra4m1_ek/board.h | 5 + hw/bsp/ra/boards/ra4m3_ek/board.h | 5 + hw/bsp/ra/boards/ra6m1_ek/board.h | 5 + hw/bsp/ra/boards/ra6m5_ek/board.h | 5 + hw/bsp/ra/boards/ra8m1_ek/board.h | 5 + hw/bsp/ra/boards/uno_r4/board.h | 5 + hw/bsp/ra/family.c | 4 + hw/bsp/rp2040/board.h | 5 + hw/bsp/rp2040/family.c | 4 + hw/bsp/rx/boards/gr_citrus/board.h | 43 +++ hw/bsp/rx/boards/rx65n_target/board.h | 43 +++ hw/bsp/samd11/boards/cynthion_d11/board.h | 5 + hw/bsp/samd11/boards/samd11_xplained/board.h | 5 + hw/bsp/samd11/family.c | 4 + hw/bsp/samd21/boards/atsamd21_xpro/board.h | 5 + .../boards/circuitplayground_express/board.h | 5 + hw/bsp/samd21/boards/curiosity_nano/board.h | 5 + hw/bsp/samd21/boards/cynthion_d21/board.h | 5 + hw/bsp/samd21/boards/feather_m0_express/board.h | 5 + hw/bsp/samd21/boards/itsybitsy_m0/board.h | 5 + hw/bsp/samd21/boards/metro_m0_express/board.h | 5 + hw/bsp/samd21/boards/qtpy/board.h | 5 + hw/bsp/samd21/boards/seeeduino_xiao/board.h | 5 + .../samd21/boards/sparkfun_samd21_mini_usb/board.h | 5 + hw/bsp/samd21/boards/trinket_m0/board.h | 5 + hw/bsp/samd21/family.c | 4 + hw/bsp/samd5x_e5x/boards/d5035_01/board.h | 5 + .../samd5x_e5x/boards/feather_m4_express/board.h | 5 + hw/bsp/samd5x_e5x/boards/itsybitsy_m4/board.h | 5 + hw/bsp/samd5x_e5x/boards/metro_m4_express/board.h | 5 + hw/bsp/samd5x_e5x/boards/pybadge/board.h | 5 + hw/bsp/samd5x_e5x/boards/pyportal/board.h | 5 + hw/bsp/samd5x_e5x/boards/same54_xplained/board.h | 5 + hw/bsp/samd5x_e5x/family.c | 4 + hw/bsp/samg/boards/samg55_xplained/board.h | 5 + hw/bsp/samg/family.c | 4 + hw/bsp/saml2x/boards/atsaml21_xpro/board.h | 5 + hw/bsp/saml2x/boards/saml22_feather/board.h | 5 + hw/bsp/saml2x/boards/sensorwatch_m0/board.h | 5 + hw/bsp/saml2x/family.c | 4 + hw/bsp/stm32c0/boards/stm32c071nucleo/board.h | 5 + hw/bsp/stm32c0/family.c | 4 + hw/bsp/stm32f0/boards/stm32f070rbnucleo/board.h | 5 + hw/bsp/stm32f0/boards/stm32f072disco/board.h | 5 + hw/bsp/stm32f0/boards/stm32f072eval/board.h | 5 + hw/bsp/stm32f0/family.c | 4 + hw/bsp/stm32f1/boards/stm32f103_bluepill/board.h | 5 + hw/bsp/stm32f1/boards/stm32f103_mini_2/board.h | 5 + hw/bsp/stm32f1/boards/stm32f103ze_iar/board.h | 5 + hw/bsp/stm32f1/family.c | 4 + hw/bsp/stm32f2/boards/stm32f207nucleo/board.h | 6 + hw/bsp/stm32f2/family.c | 4 + hw/bsp/stm32f3/boards/stm32f303disco/board.h | 6 + hw/bsp/stm32f3/family.c | 4 + hw/bsp/stm32f4/boards/feather_stm32f405/board.h | 5 + hw/bsp/stm32f4/boards/pyboardv11/board.h | 5 + hw/bsp/stm32f4/boards/stm32f401blackpill/board.h | 5 + hw/bsp/stm32f4/boards/stm32f407blackvet/board.h | 5 + hw/bsp/stm32f4/boards/stm32f407disco/board.h | 5 + hw/bsp/stm32f4/boards/stm32f411blackpill/board.h | 5 + hw/bsp/stm32f4/boards/stm32f411disco/board.h | 5 + hw/bsp/stm32f4/boards/stm32f412disco/board.h | 5 + hw/bsp/stm32f4/boards/stm32f412nucleo/board.h | 5 + hw/bsp/stm32f4/boards/stm32f439nucleo/board.h | 5 + hw/bsp/stm32f4/family.c | 4 + hw/bsp/stm32f7/boards/stlinkv3mini/board.h | 5 + hw/bsp/stm32f7/boards/stm32f723disco/board.h | 5 + hw/bsp/stm32f7/boards/stm32f746disco/board.h | 5 + hw/bsp/stm32f7/boards/stm32f746nucleo/board.h | 5 + hw/bsp/stm32f7/boards/stm32f767nucleo/board.h | 5 + hw/bsp/stm32f7/boards/stm32f769disco/board.h | 5 + hw/bsp/stm32f7/family.c | 4 + hw/bsp/stm32g0/boards/stm32g0b1nucleo/board.h | 5 + hw/bsp/stm32g0/family.c | 4 + hw/bsp/stm32g4/boards/b_g474e_dpow1/board.h | 5 + hw/bsp/stm32g4/boards/stm32g474nucleo/board.h | 5 + hw/bsp/stm32g4/boards/stm32g491nucleo/board.h | 5 + hw/bsp/stm32g4/family.c | 4 + hw/bsp/stm32h5/boards/stm32h503nucleo/board.h | 5 + hw/bsp/stm32h5/boards/stm32h563nucleo/board.h | 5 + hw/bsp/stm32h5/boards/stm32h573i_dk/board.h | 5 + hw/bsp/stm32h5/family.c | 3 + hw/bsp/stm32h7/boards/daisyseed/board.h | 5 + hw/bsp/stm32h7/boards/stm32h723nucleo/board.h | 5 + hw/bsp/stm32h7/boards/stm32h743eval/board.h | 6 +- hw/bsp/stm32h7/boards/stm32h743nucleo/board.h | 5 + hw/bsp/stm32h7/boards/stm32h745disco/board.h | 5 + hw/bsp/stm32h7/boards/stm32h750_weact/board.h | 5 + hw/bsp/stm32h7/boards/stm32h750bdk/board.h | 5 + hw/bsp/stm32h7/boards/waveshare_openh743i/board.h | 5 + hw/bsp/stm32h7/family.c | 4 + hw/bsp/stm32l0/boards/stm32l052dap52/board.h | 5 + hw/bsp/stm32l0/boards/stm32l0538disco/board.h | 5 + hw/bsp/stm32l0/family.c | 4 + hw/bsp/stm32l4/boards/stm32l412nucleo/board.h | 5 + hw/bsp/stm32l4/boards/stm32l476disco/board.h | 5 + hw/bsp/stm32l4/boards/stm32l4p5nucleo/board.h | 5 + hw/bsp/stm32l4/boards/stm32l4r5nucleo/board.h | 5 + hw/bsp/stm32l4/family.c | 4 + hw/bsp/stm32u5/boards/b_u585i_iot2a/board.h | 5 + hw/bsp/stm32u5/boards/stm32u545nucleo/board.h | 5 + hw/bsp/stm32u5/boards/stm32u575eval/board.h | 5 + hw/bsp/stm32u5/boards/stm32u575nucleo/board.h | 5 + hw/bsp/stm32u5/boards/stm32u5a5nucleo/board.h | 5 + hw/bsp/stm32u5/family.c | 4 + hw/bsp/stm32wb/boards/stm32wb55nucleo/board.h | 5 + hw/bsp/stm32wb/family.c | 4 + hw/bsp/tm4c/boards/ek_tm4c123gxl/board.h | 5 + hw/bsp/tm4c/family.c | 4 + hw/bsp/xmc4000/boards/xmc4500_relax/board.h | 5 + hw/bsp/xmc4000/boards/xmc4700_relax/board.h | 5 + hw/bsp/xmc4000/family.c | 4 + tools/gen_doc.py | 78 ++++- 247 files changed, 1697 insertions(+), 7 deletions(-) create mode 100644 docs/reference/boards.rst create mode 100644 hw/bsp/pic32mz/boards/olimex_emz64/board.h create mode 100644 hw/bsp/pic32mz/boards/olimex_hmz144/board.h create mode 100644 hw/bsp/rx/boards/gr_citrus/board.h create mode 100644 hw/bsp/rx/boards/rx65n_target/board.h (limited to 'tools') diff --git a/docs/info/changelog.rst b/docs/info/changelog.rst index a69705bde..0a34c0842 100644 --- a/docs/info/changelog.rst +++ b/docs/info/changelog.rst @@ -17,7 +17,6 @@ General - Build ARM IAR with CircleCI - Improve HIL with dual/host_info_to_device_cdc optional for pico/pico2, enable dwc2 dma test - API Changes ----------- @@ -31,7 +30,6 @@ API Changes - ``CFG_TUD/TUH_DWC2_SLAVE_ENABLE`` enable dwc2 slave mode - ``CFG_TUD/TUH_DWC2_DMA_ENABLE`` enable dwc2 dma mode - Controller Driver (DCD & HCD) ----------------------------- diff --git a/docs/reference/boards.rst b/docs/reference/boards.rst new file mode 100644 index 000000000..424336dad --- /dev/null +++ b/docs/reference/boards.rst @@ -0,0 +1,315 @@ +**************** +Supported Boards +**************** + +Following boards are supported and can be used to run stock examples + + + +Analog Devices +============== + +============= ================ ======== =========================================================================================================================== ====== +Board Name Family URL Note +============= ================ ======== =========================================================================================================================== ====== +max32650evkit MAX32650 EVKIT max32650 https://www.analog.com/en/resources/evaluation-hardware-and-software/evaluation-boards-kits/max32650-evkit.html#eb-overview +max32650fthr MAX32650 Feather max32650 https://www.analog.com/en/resources/evaluation-hardware-and-software/evaluation-boards-kits/max32650fthr.html +max32651evkit MAX32651 EVKIT max32650 https://www.analog.com/en/resources/evaluation-hardware-and-software/evaluation-boards-kits/max32651-evkit.html +max32666evkit MAX32666 EVKIT max32666 https://www.analog.com/en/resources/evaluation-hardware-and-software/evaluation-boards-kits/max32666evkit.html +max32666fthr MAX32666 Feather max32666 https://www.analog.com/en/resources/evaluation-hardware-and-software/evaluation-boards-kits/max32666fthr.html +apard32690 APARD32690-SL max32690 https://www.analog.com/en/resources/evaluation-hardware-and-software/evaluation-boards-kits/ad-apard32690-sl.html +max32690evkit MAX32690 EVKIT max32690 https://www.analog.com/en/resources/evaluation-hardware-and-software/evaluation-boards-kits/max32690evkit.html +max78002evkit MAX78002 EVKIT max78002 https://www.analog.com/en/resources/evaluation-hardware-and-software/evaluation-boards-kits/max78002evkit.html +============= ================ ======== =========================================================================================================================== ====== + +Bridgetek +========= + +========= ========= ======== ===================================== ====== +Board Name Family URL Note +========= ========= ======== ===================================== ====== +mm900evxb MM900EVxB brtmm90x https://brtchip.com/product/mm900ev1b +========= ========= ======== ===================================== ====== + +Espressif +========= + +========================= ============================== ========= ======================================================================================================== ====== +Board Name Family URL Note +========================= ============================== ========= ======================================================================================================== ====== +adafruit_feather_esp32_v2 Adafruit Feather ESP32 v2 espressif https://www.adafruit.com/product/5400 +adafruit_feather_esp32s2 Adafruit Feather ESP32S2 espressif https://www.adafruit.com/product/5000 +adafruit_feather_esp32s3 Adafruit Feather ESP32S3 espressif https://www.adafruit.com/product/5323 +adafruit_magtag_29gray Adafruit MagTag 2.9" Grayscale espressif https://www.adafruit.com/product/4800 +adafruit_metro_esp32s2 Adafruit Metro ESP32-S2 espressif https://www.adafruit.com/product/4775 +espressif_addax_1 Espresif Addax-1 espressif n/a +espressif_c3_devkitc Espresif C3 DevKitC espressif https://docs.espressif.com/projects/esp-dev-kits/en/latest/esp32c3/esp32-c3-devkitc-02/index.html +espressif_c6_devkitc Espresif C6 DevKitC espressif https://docs.espressif.com/projects/esp-dev-kits/en/latest/esp32c6/esp32-c6-devkitc-1/index.html +espressif_kaluga_1 Espresif Kaluga 1 espressif https://docs.espressif.com/projects/esp-dev-kits/en/latest/esp32s2/esp32-s2-kaluga-1/index.html +espressif_p4_function_ev Espresif P4 Function EV espressif https://docs.espressif.com/projects/esp-dev-kits/en/latest/esp32p4/esp32-p4-function-ev-board/index.html +espressif_s2_devkitc Espresif S2 DevKitC espressif https://docs.espressif.com/projects/esp-dev-kits/en/latest/esp32s2/esp32-s2-devkitc-1/index.html +espressif_s3_devkitc Espresif S3 DevKitC espressif https://docs.espressif.com/projects/esp-dev-kits/en/latest/esp32s3/esp32-s3-devkitc-1/index.html +espressif_s3_devkitm Espresif S3 DevKitM espressif https://docs.espressif.com/projects/esp-dev-kits/en/latest/esp32s3/esp32-s3-devkitm-1/index.html +espressif_saola_1 Espresif S2 Saola 1 espressif https://docs.espressif.com/projects/esp-dev-kits/en/latest/esp32s2/esp32-s2-saola-1/index.html +========================= ============================== ========= ======================================================================================================== ====== + +GigaDevice +========== + +================== ================== ========= ============================= ====== +Board Name Family URL Note +================== ================== ========= ============================= ====== +sipeed_longan_nano Sipeed Longan Nano gd32vf103 https://longan.sipeed.com/en/ +================== ================== ========= ============================= ====== + +Infineon +======== + +============= ================= ======== ============================================================================= ====== +Board Name Family URL Note +============= ================= ======== ============================================================================= ====== +xmc4500_relax XMC4500 relax kit xmc4000 https://www.infineon.com/cms/en/product/evaluation-boards/kit_xmc45_relax_v1/ +xmc4700_relax XMC4700 relax kit xmc4000 https://www.infineon.com/cms/en/product/evaluation-boards/kit_xmc47_relax_v1/ +============= ================= ======== ============================================================================= ====== + +Microchip +========= + +========================= =================================== ========== ================================================================================= ====== +Board Name Family URL Note +========================= =================================== ========== ================================================================================= ====== +olimex_emz64 Olimex PIC32-EMZ64 pic32mz https://www.olimex.com/Products/PIC/Development/PIC32-EMZ64/open-source-hardware +olimex_hmz144 Olimex PIC32-HMZ144 pic32mz https://www.olimex.com/Products/PIC/Development/PIC32-HMZ144/open-source-hardware +cynthion_d11 Great Scott Gadgets Cynthion samd11 https://greatscottgadgets.com/cynthion/ +samd11_xplained SAMD11 Xplained Pro samd11 https://www.microchip.com/en-us/development-tool/ATSAMD11-XPRO +atsamd21_xpro SAMD21 Xplained Pro samd21 https://www.microchip.com/DevelopmentTools/ProductDetails/ATSAMD21-XPRO +circuitplayground_express Adafruit Circuit Playground Express samd21 https://www.adafruit.com/product/3333 +curiosity_nano SAMD21 Curiosty Nano samd21 https://www.microchip.com/en-us/development-tool/dm320119 +cynthion_d21 Great Scott Gadgets Cynthion samd21 https://greatscottgadgets.com/cynthion/ +feather_m0_express Adafruit Feather M0 Express samd21 https://www.adafruit.com/product/3403 +itsybitsy_m0 Adafruit ItsyBitsy M0 samd21 https://www.adafruit.com/product/3727 +metro_m0_express Adafruit Metro M0 Express samd21 https://www.adafruit.com/product/3505 +qtpy Adafruit QT Py samd21 https://www.adafruit.com/product/4600 +seeeduino_xiao Seeeduino XIAO samd21 https://wiki.seeedstudio.com/Seeeduino-XIAO/ +sparkfun_samd21_mini_usb SparkFun SAMD21 Mini samd21 https://www.sparkfun.com/products/13664 +trinket_m0 Adafruit Trinket M0 samd21 https://www.adafruit.com/product/3500 +d5035_01 D5035-01 samd5x_e5x https://github.com/RudolphRiedel/USB_CAN-FD +feather_m4_express Adafruit Feather M4 Express samd5x_e5x https://www.adafruit.com/product/3857 +itsybitsy_m4 Adafruit ItsyBitsy M4 samd5x_e5x https://www.adafruit.com/product/3800 +metro_m4_express Adafruit Metro M4 Express samd5x_e5x https://www.adafruit.com/product/3382 +pybadge Adafruit PyBadge samd5x_e5x https://www.adafruit.com/product/4200 +pyportal Adafruit PyPortal samd5x_e5x https://www.adafruit.com/product/4116 +same54_xplained SAME54 Xplained Pro samd5x_e5x https://www.microchip.com/DevelopmentTools/ProductDetails/ATSAME54-XPRO +samg55_xplained SAMG55 Xplained Pro samg https://www.microchip.com/DevelopmentTools/ProductDetails/ATSAMG55-XPRO +atsaml21_xpro SAML21 Xplained Pro saml2x https://www.microchip.com/en-us/development-tool/atsaml21-xpro-b +saml22_feather SAML22 Feather saml2x https://github.com/joeycastillo/Feather-Projects/tree/main/SAML22%20Feather +sensorwatch_m0 SensorWatch saml2x https://github.com/joeycastillo/Sensor-Watch +========================= =================================== ========== ================================================================================= ====== + +MindMotion +========== + +===================== ====================================== ======== =============================================================================================== ====== +Board Name Family URL Note +===================== ====================================== ======== =============================================================================================== ====== +mm32f327x_mb39 MM32F3273G9P MB-039 mm32 https://www.mindmotion.com.cn/support/development_tools/evaluation_boards/evboard/mm32f3273g9p/ +mm32f327x_pitaya_lite DshanMCU Pitaya Lite with MM32F3273G8P mm32 https://gitee.com/weidongshan/DshanMCU-Pitaya-c +===================== ====================================== ======== =============================================================================================== ====== + +NXP +=== + +================== ========================================= ============= ========================================================================================================================================================================= ====== +Board Name Family URL Note +================== ========================================= ============= ========================================================================================================================================================================= ====== +metro_m7_1011 Adafruit Metro M7 1011 imxrt https://www.adafruit.com/product/5600 +metro_m7_1011_sd Adafruit Metro M7 1011 SD imxrt https://www.adafruit.com/product/5600 +mimxrt1010_evk i.MX RT1010 Evaluation Kit imxrt https://www.nxp.com/design/design-center/development-boards-and-designs/i-mx-evaluation-and-development-boards/i-mx-rt1010-evaluation-kit:MIMXRT1010-EVK +mimxrt1015_evk i.MX RT1015 Evaluation Kit imxrt https://www.nxp.com/design/design-center/development-boards-and-designs/MIMXRT1015-EVK +mimxrt1020_evk i.MX RT1020 Evaluation Kit imxrt https://www.nxp.com/design/design-center/development-boards-and-designs/MIMXRT1020-EVK +mimxrt1024_evk i.MX RT1024 Evaluation Kit imxrt https://www.nxp.com/design/design-center/development-boards-and-designs/i-mx-evaluation-and-development-boards/i-mx-rt1024-evaluation-kit:MIMXRT1024-EVK +mimxrt1050_evkb i.MX RT1050 Evaluation Kit revB imxrt https://www.nxp.com/part/IMXRT1050-EVKB +mimxrt1060_evk i.MX RT1060 Evaluation Kit revB imxrt https://www.nxp.com/design/design-center/development-boards-and-designs/MIMXRT1060-EVKB +mimxrt1064_evk i.MX RT1064 Evaluation Kit imxrt https://www.nxp.com/design/design-center/development-boards-and-designs/MIMXRT1064-EVK +mimxrt1170_evkb i.MX RT1070 Evaluation Kit imxrt https://www.nxp.com/design/design-center/development-boards-and-designs/i-mx-evaluation-and-development-boards/i-mx-rt1170-evaluation-kit:MIMXRT1170-EVKB +teensy_40 Teensy 4.0 imxrt https://www.pjrc.com/store/teensy40.html +teensy_41 Teensy 4.1 imxrt https://www.pjrc.com/store/teensy41.html +frdm_k64f Freedom K64F kinetis_k https://www.nxp.com/design/design-center/development-boards-and-designs/general-purpose-mcus/freedom-development-platform-for-kinetis-k64-k63-and-k24-mcus:FRDM-K64F +teensy_35 Teensy 3.5 kinetis_k https://www.pjrc.com/store/teensy35.html +frdm_k32l2a4s Freedom K32L2A4S kinetis_k32l2 https://www.nxp.com/design/design-center/development-boards-and-designs/FRDM-K32L2A4S +frdm_k32l2b Freedom K32L2B3 kinetis_k32l2 https://www.nxp.com/design/design-center/development-boards-and-designs/general-purpose-mcus/nxp-freedom-development-platform-for-k32-l2b-mcus:FRDM-K32L2B3 +kuiic Kuiic kinetis_k32l2 https://github.com/nxf58843/kuiic +frdm_kl25z fomu kinetis_kl https://www.nxp.com/design/design-center/development-boards-and-designs/general-purpose-mcus/freedom-development-platform-for-kinetis-kl14-kl15-kl24-kl25-mcus:FRDM-KL25Z +lpcxpresso11u37 LPCXpresso11U37 lpc11 https://www.nxp.com/design/design-center/development-boards-and-designs/OM13074 +lpcxpresso11u68 LPCXpresso11U68 lpc11 https://www.nxp.com/design/design-center/development-boards-and-designs/OM13058 +lpcxpresso1347 LPCXpresso1347 lpc13 https://www.nxp.com/products/no-longer-manufactured/lpcxpresso-board-for-lpc1347:OM13045 +lpcxpresso1549 LPCXpresso1549 lpc15 https://www.nxp.com/design/design-center/development-boards-and-designs/OM13056 +lpcxpresso1769 LPCXpresso1769 lpc17 https://www.nxp.com/design/design-center/development-boards-and-designs/OM13000 +mbed1768 mbed 1768 lpc17 https://www.nxp.com/products/processors-and-microcontrollers/arm-microcontrollers/general-purpose-mcus/lpc1700-arm-cortex-m3/arm-mbed-lpc1768-board:OM11043 +lpcxpresso18s37 LPCXpresso18s37 lpc18 https://www.nxp.com/design/design-center/software/development-software/mcuxpresso-software-and-tools-/lpcxpresso-boards/lpcxpresso18s37-development-board:OM13076 +mcb1800 Keil MCB1800 lpc18 https://www.keil.com/arm/mcb1800/ +ea4088_quickstart Embedded Artists LPC4088 QuickStart Board lpc40 https://www.embeddedartists.com/products/lpc4088-quickstart-board/ +ea4357 Embedded Artists LPC4357 Development Kit lpc43 https://www.embeddedartists.com/products/lpc4357-developers-kit/ +lpcxpresso43s67 LPCXpresso43S67 lpc43 https://www.nxp.com/design/design-center/software/development-software/mcuxpresso-software-and-tools-/lpcxpresso-boards/lpcxpresso43s67-development-board:OM13084 +lpcxpresso51u68 LPCXpresso51u68 lpc51 https://www.nxp.com/products/processors-and-microcontrollers/arm-microcontrollers/general-purpose-mcus/lpcxpresso51u68-for-the-lpc51u68-mcus:OM40005 +lpcxpresso54114 LPCXpresso54114 lpc54 https://www.nxp.com/design/design-center/software/development-software/mcuxpresso-software-and-tools-/lpcxpresso-boards/lpcxpresso54114-board:OM13089 +lpcxpresso54608 LPCXpresso54608 lpc54 https://www.nxp.com/design/design-center/software/development-software/mcuxpresso-software-and-tools-/lpcxpresso-development-board-for-lpc5460x-mcus:OM13092 +lpcxpresso54628 LPCXpresso54628 lpc54 https://www.nxp.com/design/design-center/software/development-software/mcuxpresso-software-and-tools-/lpcxpresso-boards/lpcxpresso54628-development-board:OM13098 +double_m33_express Double M33 Express lpc55 https://www.crowdsupply.com/steiert-solutions/double-m33-express +lpcxpresso55s28 LPCXpresso55s28 lpc55 https://www.nxp.com/design/design-center/software/development-software/mcuxpresso-software-and-tools-/lpcxpresso-boards/lpcxpresso55s28-development-board:LPC55S28-EVK +lpcxpresso55s69 LPCXpresso55s69 lpc55 https://www.nxp.com/design/design-center/software/development-software/mcuxpresso-software-and-tools-/lpcxpresso-boards/lpcxpresso55s69-development-board:LPC55S69-EVK +mcu_link MCU Link lpc55 https://www.nxp.com/design/design-center/software/development-software/mcuxpresso-software-and-tools-/mcu-link-debug-probe:MCU-LINK +frdm_mcxa153 Freedom MCXA153 mcx https://www.nxp.com/design/design-center/development-boards-and-designs/FRDM-MCXA153 +frdm_mcxn947 Freedom MCXN947 mcx https://www.nxp.com/design/design-center/development-boards-and-designs/FRDM-MCXN947 +mcxn947brk MCXN947 Breakout mcx n/a +================== ========================================= ============= ========================================================================================================================================================================= ====== + +Nordic Semiconductor +==================== + +=========================== ===================================== ======== ============================================================================== ====== +Board Name Family URL Note +=========================== ===================================== ======== ============================================================================== ====== +adafruit_clue Adafruit CLUE nrf https://www.adafruit.com/product/4500 +arduino_nano33_ble Arduino Nano 33 BLE nrf https://store.arduino.cc/arduino-nano-33-ble +circuitplayground_bluefruit Adafruit Circuit Playground Bluefruit nrf https://www.adafruit.com/product/4333 +feather_nrf52840_express Adafruit Feather nRF52840 Express nrf https://www.adafruit.com/product/4062 +feather_nrf52840_sense Adafruit Feather nRF52840 Sense nrf https://www.adafruit.com/product/4516 +itsybitsy_nrf52840 Adafruit ItsyBitsy nRF52840 Express nrf https://www.adafruit.com/product/4481 +pca10056 Nordic nRF52840DK nrf https://www.nordicsemi.com/Software-and-Tools/Development-Kits/nRF52840-DK +pca10059 Nordic nRF52840 Dongle nrf https://www.nordicsemi.com/Software-and-Tools/Development-Kits/nRF52840-Dongle +pca10095 Nordic nRF5340 DK nrf https://www.nordicsemi.com/Software-and-Tools/Development-Kits/nRF5340-DK +pca10100 Nordic nRF52833 DK nrf https://www.nordicsemi.com/Software-and-Tools/Development-Kits/nRF52833-DK +=========================== ===================================== ======== ============================================================================== ====== + +Raspberry Pi +============ + +================= ================= ============== ========================================================== ====== +Board Name Family URL Note +================= ================= ============== ========================================================== ====== +raspberrypi_zero Raspberry Pi Zero broadcom_32bit https://www.raspberrypi.org/products/raspberry-pi-zero/ +raspberrypi_cm4 Raspberry CM4 broadcom_64bit https://www.raspberrypi.org/products/compute-module-4 +raspberrypi_zero2 Raspberry Zero2 broadcom_64bit https://www.raspberrypi.org/products/raspberry-pi-zero-2-w +================= ================= ============== ========================================================== ====== + +Renesas +======= + +============== =========================== ======== ================================================================================================================================================================ ====== +Board Name Family URL Note +============== =========================== ======== ================================================================================================================================================================ ====== +da14695_dk_usb DA14695-00HQDEVKT-U da1469x https://www.renesas.com/en/products/wireless-connectivity/bluetooth-low-energy/da14695-00hqdevkt-u-smartbond-da14695-bluetooth-low-energy-52-usb-development-kit +da1469x_dk_pro DA1469x Development Kit Pro da1469x https://lpccs-docs.renesas.com/um-b-090-da1469x_getting_started/DA1469x_The_hardware/DA1469x_The_hardware.html +portenta_c33 Arduino Portenta C33 ra https://www.arduino.cc/pro/hardware-product-portenta-c33/ +ra2a1_ek RA2A1 EK ra https://www.renesas.com/en/products/microcontrollers-microprocessors/ra-cortex-m-mcus/ek-ra2a1-evaluation-kit-ra2a1-mcu-group +ra4m1_ek RA4M1 EK ra https://www.renesas.com/en/products/microcontrollers-microprocessors/ra-cortex-m-mcus/ek-ra4m1-evaluation-kit-ra4m1-mcu-group +ra4m3_ek RA4M3 EK ra https://www.renesas.com/en/products/microcontrollers-microprocessors/ra-cortex-m-mcus/ek-ra4m3-evaluation-kit-ra4m3-mcu-group +ra6m1_ek RA6M1 EK ra https://www.renesas.com/en/products/microcontrollers-microprocessors/ra-cortex-m-mcus/ek-ra6m1-evaluation-kit-ra6m1-mcu-group +ra6m5_ek RA6M5 EK ra https://www.renesas.com/en/products/microcontrollers-microprocessors/ra-cortex-m-mcus/ek-ra6m5-evaluation-kit-ra6m5-mcu-group +ra8m1_ek RA8M1 EK ra https://www.renesas.com/en/products/microcontrollers-microprocessors/ra-cortex-m-mcus/ek-ra8m1-evaluation-kit-ra8m1-mcu-group +uno_r4 Arduino UNO R4 ra https://store-usa.arduino.cc/pages/uno-r4 +============== =========================== ======== ================================================================================================================================================================ ====== + +STMicroelectronics +================== + +=================== ================================= ======== ================================================================= ====== +Board Name Family URL Note +=================== ================================= ======== ================================================================= ====== +stm32c071nucleo STM32C071 Nucleo stm32c0 https://www.st.com/en/evaluation-tools/nucleo-g071rb.html +stm32f070rbnucleo STM32 F070 Nucleo stm32f0 https://www.st.com/en/evaluation-tools/nucleo-f070rb.html +stm32f072disco STM32 F072 Discovery stm32f0 https://www.st.com/en/evaluation-tools/32f072bdiscovery.html +stm32f072eval STM32 F072 Eval stm32f0 https://www.st.com/en/evaluation-tools/stm32072b-eval.html +stm32f103_bluepill STM32 F103 Bluepill stm32f1 https://stm32-base.org/boards/STM32F103C8T6-Blue-Pill +stm32f103_mini_2 STM32 F103 Mini v2 stm32f1 https://stm32-base.org/boards/STM32F103RCT6-STM32-Mini-V2.0 +stm32f103ze_iar IAR STM32 F103ze starter kit stm32f1 n/a +stm32f207nucleo STM32 F207 Nucleo stm32f2 https://www.st.com/en/evaluation-tools/nucleo-f207zg.html +stm32f303disco STM32 F303 Discovery stm32f3 https://www.st.com/en/evaluation-tools/stm32f3discovery.html +feather_stm32f405 Adafruit Feather STM32F405 stm32f4 https://www.adafruit.com/product/4382 +pyboardv11 Pyboard v1.1 stm32f4 https://www.adafruit.com/product/2390 +stm32f401blackpill STM32 F401 Blackpill stm32f4 https://stm32-base.org/boards/STM32F401CCU6-WeAct-Black-Pill-V1.2 +stm32f407blackvet STM32 F407 Blackvet stm32f4 https://stm32-base.org/boards/STM32F407VET6-STM32-F4VE-V2.0 +stm32f407disco STM32 F407 Discovery stm32f4 https://www.st.com/en/evaluation-tools/stm32f4discovery.html +stm32f411blackpill STM32 F411 Blackpill stm32f4 https://stm32-base.org/boards/STM32F411CEU6-WeAct-Black-Pill-V2.0 +stm32f411disco STM32 F411 Discovery stm32f4 https://www.st.com/en/evaluation-tools/32f411ediscovery.html +stm32f412disco STM32 F412 Discovery stm32f4 https://www.st.com/en/evaluation-tools/32f412gdiscovery.html +stm32f412nucleo STM32 F412 Nucleo stm32f4 https://www.st.com/en/evaluation-tools/nucleo-f412zg.html +stm32f439nucleo STM32 F439 Nucleo stm32f4 https://www.st.com/en/evaluation-tools/nucleo-f439zi.html +stlinkv3mini Stlink-v3 mini stm32f7 https://www.st.com/en/development-tools/stlink-v3mini.html +stm32f723disco STM32 F723 Discovery stm32f7 https://www.st.com/en/evaluation-tools/32f723ediscovery.html +stm32f746disco STM32 F746 Discovery stm32f7 https://www.st.com/en/evaluation-tools/32f746gdiscovery.html +stm32f746nucleo STM32 F746 Nucleo stm32f7 https://www.st.com/en/evaluation-tools/nucleo-f746zg.html +stm32f767nucleo STM32 F767 Nucleo stm32f7 https://www.st.com/en/evaluation-tools/nucleo-f767zi.html +stm32f769disco STM32 F769 Discovery stm32f7 https://www.st.com/en/evaluation-tools/32f769idiscovery.html +stm32g0b1nucleo STM32 G0B1 Nucleo stm32g0 https://www.st.com/en/evaluation-tools/nucleo-g0b1re.html +b_g474e_dpow1 STM32 B-G474E-DPOW1 Discovery kit stm32g4 https://www.st.com/en/evaluation-tools/b-g474e-dpow1.html +stm32g474nucleo STM32 G474 Nucleo stm32g4 https://www.st.com/en/evaluation-tools/nucleo-g474re.html +stm32g491nucleo STM32 G491 Nucleo stm32g4 https://www.st.com/en/evaluation-tools/nucleo-g491re.html +stm32h503nucleo STM32 H503 Nucleo stm32h5 https://www.st.com/en/evaluation-tools/nucleo-h503rb.html +stm32h563nucleo STM32 H563 Nucleo stm32h5 https://www.st.com/en/evaluation-tools/nucleo-h563zi.html +stm32h573i_dk STM32 H573i Discovery stm32h5 https://www.st.com/en/evaluation-tools/stm32h573i-dk.html +daisyseed Daisy Seed stm32h7 https://electro-smith.com/products/daisy-seed +stm32h723nucleo STM32 H723 Nucleo stm32h7 https://www.st.com/en/evaluation-tools/nucleo-h723zg.html +stm32h743eval STM32 H743 Eval stm32h7 https://www.st.com/en/evaluation-tools/stm32h743i-eval.html +stm32h743nucleo STM32 H743 Nucleo stm32h7 https://www.st.com/en/evaluation-tools/nucleo-h743zi.html +stm32h745disco STM32 H745 Discovery stm32h7 https://www.st.com/en/evaluation-tools/stm32h745i-disco.html +stm32h750_weact STM32 H750 WeAct stm32h7 https://www.adafruit.com/product/5032 +stm32h750bdk STM32 H750b Discovery Kit stm32h7 https://www.st.com/en/evaluation-tools/stm32h750b-dk.html +waveshare_openh743i Waveshare Open H743i stm32h7 https://www.waveshare.com/openh743i-c-standard.htm +stm32l052dap52 STM32 L052 DAP stm32l0 n/a +stm32l0538disco STM32 L0538 Discovery stm32l0 https://www.st.com/en/evaluation-tools/32l0538discovery.html +stm32l412nucleo STM32 L412 Nucleo stm32l4 https://www.st.com/en/evaluation-tools/nucleo-l412kb.html +stm32l476disco STM32 L476 Disco stm32l4 https://www.st.com/en/evaluation-tools/32l476gdiscovery.html +stm32l4p5nucleo STM32 L4P5 Nucleo stm32l4 https://www.st.com/en/evaluation-tools/nucleo-l4p5zg.html +stm32l4r5nucleo STM32 L4R5 Nucleo stm32l4 https://www.st.com/en/evaluation-tools/nucleo-l4r5zi.html +b_u585i_iot2a STM32 B-U585i IOT2A Discovery kit stm32u5 https://www.st.com/en/evaluation-tools/b-u585i-iot02a.html +stm32u545nucleo STM32 U545 Nucleo stm32u5 https://www.st.com/en/evaluation-tools/nucleo-u545re-q.html +stm32u575eval STM32 U575 Eval stm32u5 https://www.st.com/en/evaluation-tools/stm32u575i-ev.html +stm32u575nucleo STM32 U575 Nucleo stm32u5 https://www.st.com/en/evaluation-tools/nucleo-u575zi-q.html +stm32u5a5nucleo STM32 U5a5 Nucleo stm32u5 https://www.st.com/en/evaluation-tools/nucleo-u5a5zj-q.html +stm32wb55nucleo STM32 P-NUCLEO-WB55 stm32wb https://www.st.com/en/evaluation-tools/p-nucleo-wb55.html +=================== ================================= ======== ================================================================= ====== + +Sunxi +===== + +======= ================= ======== ========================================= ====== +Board Name Family URL Note +======= ================= ======== ========================================= ====== +f1c100s Lctech Pi F1C200s f1c100s https://linux-sunxi.org/Lctech_Pi_F1C200s +======= ================= ======== ========================================= ====== + +Texas Instruments +================= + +================= ===================== ======== ========================================= ====== +Board Name Family URL Note +================= ===================== ======== ========================================= ====== +msp_exp430f5529lp MSP430F5529 LaunchPad msp430 https://www.ti.com/tool/MSP-EXP430F5529LP +msp_exp432e401y MSP432E401Y LaunchPad msp432e4 https://www.ti.com/tool/MSP-EXP432E401Y +ek_tm4c123gxl TM4C123G LaunchPad tm4c https://www.ti.com/tool/EK-TM4C123GXL +================= ===================== ======== ========================================= ====== + +Tomu +==== + +======= ====== ======== ========================= ====== +Board Name Family URL Note +======= ====== ======== ========================= ====== +fomu fomu fomu https://tomu.im/fomu.html +======= ====== ======== ========================= ====== + +WCH +=== + +================ ================ ======== ===================================================================== ====== +Board Name Family URL Note +================ ================ ======== ===================================================================== ====== +ch32f205r-r0 CH32F205r-r0 ch32f20x https://github.com/openwch/ch32f20x +ch32v103r_r1_1v0 CH32V103R-R1-1v1 ch32v10x https://github.com/openwch/ch32v103/tree/main/SCHPCB/CH32V103R-R1-1v1 +ch32v203c_r0_1v0 CH32V203C-R0-1v0 ch32v20x https://github.com/openwch/ch32v20x/tree/main/SCHPCB/CH32V203C-R0 +ch32v203g_r0_1v0 CH32V203G-R0-1v0 ch32v20x https://github.com/openwch/ch32v20x/tree/main/SCHPCB/CH32V203C-R0 +nanoch32v203 nanoCH32V203 ch32v20x https://github.com/wuxx/nanoCH32V203 +ch32v307v_r1_1v0 CH32V307V-R1-1v0 ch32v307 https://github.com/openwch/ch32v307/tree/main/SCHPCB/CH32V307V-R1-1v0 +================ ================ ======== ===================================================================== ====== diff --git a/docs/reference/index.rst b/docs/reference/index.rst index 9ecdf619b..e9b033033 100644 --- a/docs/reference/index.rst +++ b/docs/reference/index.rst @@ -79,7 +79,8 @@ Index .. toctree:: :maxdepth: 2 - supported getting_started + supported + boards dependencies concurrency diff --git a/hw/bsp/broadcom_32bit/boards/raspberrypi_zero/board.h b/hw/bsp/broadcom_32bit/boards/raspberrypi_zero/board.h index 84a106346..40a9dd198 100644 --- a/hw/bsp/broadcom_32bit/boards/raspberrypi_zero/board.h +++ b/hw/bsp/broadcom_32bit/boards/raspberrypi_zero/board.h @@ -24,6 +24,11 @@ * This file is part of the TinyUSB stack. */ +/* metadata: + name: Raspberry Pi Zero + url: https://www.raspberrypi.org/products/raspberry-pi-zero/ +*/ + #ifndef BOARD_H_ #define BOARD_H_ diff --git a/hw/bsp/broadcom_32bit/family.c b/hw/bsp/broadcom_32bit/family.c index 0062e2e83..f8f3b0b70 100644 --- a/hw/bsp/broadcom_32bit/family.c +++ b/hw/bsp/broadcom_32bit/family.c @@ -24,6 +24,10 @@ * This file is part of the TinyUSB stack. */ +/* metadata: + manufacturer: Raspberry Pi +*/ + #include "bsp/board_api.h" #include "board.h" diff --git a/hw/bsp/broadcom_64bit/boards/raspberrypi_cm4/board.h b/hw/bsp/broadcom_64bit/boards/raspberrypi_cm4/board.h index 84a106346..cadad2b27 100644 --- a/hw/bsp/broadcom_64bit/boards/raspberrypi_cm4/board.h +++ b/hw/bsp/broadcom_64bit/boards/raspberrypi_cm4/board.h @@ -24,6 +24,11 @@ * This file is part of the TinyUSB stack. */ +/* metadata: + name: Raspberry CM4 + url: https://www.raspberrypi.org/products/compute-module-4 +*/ + #ifndef BOARD_H_ #define BOARD_H_ diff --git a/hw/bsp/broadcom_64bit/boards/raspberrypi_zero2/board.h b/hw/bsp/broadcom_64bit/boards/raspberrypi_zero2/board.h index 84a106346..e6caa0294 100644 --- a/hw/bsp/broadcom_64bit/boards/raspberrypi_zero2/board.h +++ b/hw/bsp/broadcom_64bit/boards/raspberrypi_zero2/board.h @@ -24,6 +24,11 @@ * This file is part of the TinyUSB stack. */ +/* metadata: + name: Raspberry Zero2 + url: https://www.raspberrypi.org/products/raspberry-pi-zero-2-w +*/ + #ifndef BOARD_H_ #define BOARD_H_ diff --git a/hw/bsp/broadcom_64bit/family.c b/hw/bsp/broadcom_64bit/family.c index 0062e2e83..f8f3b0b70 100644 --- a/hw/bsp/broadcom_64bit/family.c +++ b/hw/bsp/broadcom_64bit/family.c @@ -24,6 +24,10 @@ * This file is part of the TinyUSB stack. */ +/* metadata: + manufacturer: Raspberry Pi +*/ + #include "bsp/board_api.h" #include "board.h" diff --git a/hw/bsp/brtmm90x/boards/mm900evxb/board.h b/hw/bsp/brtmm90x/boards/mm900evxb/board.h index 771779108..623033c2c 100644 --- a/hw/bsp/brtmm90x/boards/mm900evxb/board.h +++ b/hw/bsp/brtmm90x/boards/mm900evxb/board.h @@ -24,6 +24,11 @@ * This file is part of the TinyUSB stack. */ +/* metadata: + name: MM900EVxB + url: https://brtchip.com/product/mm900ev1b +*/ + #ifndef BOARD_H_ #define BOARD_H_ diff --git a/hw/bsp/brtmm90x/family.c b/hw/bsp/brtmm90x/family.c index 4d81e7d52..15ff4b8ee 100644 --- a/hw/bsp/brtmm90x/family.c +++ b/hw/bsp/brtmm90x/family.c @@ -24,6 +24,10 @@ * This file is part of the TinyUSB stack. */ +/* metadata: + manufacturer: Bridgetek +*/ + #include "bsp/board_api.h" #include "board.h" diff --git a/hw/bsp/ch32f20x/boards/ch32f205r-r0/board.h b/hw/bsp/ch32f20x/boards/ch32f205r-r0/board.h index d5849bddb..b855804a9 100644 --- a/hw/bsp/ch32f20x/boards/ch32f205r-r0/board.h +++ b/hw/bsp/ch32f20x/boards/ch32f205r-r0/board.h @@ -22,6 +22,11 @@ * THE SOFTWARE. */ +/* metadata: + name: CH32F205r-r0 + url: https://github.com/openwch/ch32f20x +*/ + #ifndef BOARD_H_ #define BOARD_H_ diff --git a/hw/bsp/ch32f20x/family.c b/hw/bsp/ch32f20x/family.c index 9717832d6..7fef71d47 100644 --- a/hw/bsp/ch32f20x/family.c +++ b/hw/bsp/ch32f20x/family.c @@ -24,6 +24,10 @@ * This file is part of the TinyUSB stack. */ +/* metadata: + manufacturer: WCH +*/ + #include "stdio.h" #include "debug_uart.h" diff --git a/hw/bsp/ch32v10x/boards/ch32v103r_r1_1v0/board.h b/hw/bsp/ch32v10x/boards/ch32v103r_r1_1v0/board.h index 3b1187c3a..1fde4244c 100644 --- a/hw/bsp/ch32v10x/boards/ch32v103r_r1_1v0/board.h +++ b/hw/bsp/ch32v10x/boards/ch32v103r_r1_1v0/board.h @@ -1,3 +1,8 @@ +/* metadata: + name: CH32V103R-R1-1v1 + url: https://github.com/openwch/ch32v103/tree/main/SCHPCB/CH32V103R-R1-1v1 +*/ + #ifndef BOARD_H_ #define BOARD_H_ diff --git a/hw/bsp/ch32v10x/family.c b/hw/bsp/ch32v10x/family.c index 15f754e11..f25102494 100644 --- a/hw/bsp/ch32v10x/family.c +++ b/hw/bsp/ch32v10x/family.c @@ -1,3 +1,7 @@ +/* metadata: + manufacturer: WCH +*/ + #include // https://github.com/openwch/ch32v307/pull/90 diff --git a/hw/bsp/ch32v20x/boards/ch32v203c_r0_1v0/board.h b/hw/bsp/ch32v20x/boards/ch32v203c_r0_1v0/board.h index 692cf11bf..256958088 100644 --- a/hw/bsp/ch32v20x/boards/ch32v203c_r0_1v0/board.h +++ b/hw/bsp/ch32v20x/boards/ch32v203c_r0_1v0/board.h @@ -1,3 +1,8 @@ +/* metadata: + name: CH32V203C-R0-1v0 + url: https://github.com/openwch/ch32v20x/tree/main/SCHPCB/CH32V203C-R0 +*/ + #ifndef BOARD_H_ #define BOARD_H_ diff --git a/hw/bsp/ch32v20x/boards/ch32v203g_r0_1v0/board.h b/hw/bsp/ch32v20x/boards/ch32v203g_r0_1v0/board.h index 783831edd..827226d80 100644 --- a/hw/bsp/ch32v20x/boards/ch32v203g_r0_1v0/board.h +++ b/hw/bsp/ch32v20x/boards/ch32v203g_r0_1v0/board.h @@ -1,3 +1,8 @@ +/* metadata: + name: CH32V203G-R0-1v0 + url: https://github.com/openwch/ch32v20x/tree/main/SCHPCB/CH32V203C-R0 +*/ + #ifndef BOARD_H_ #define BOARD_H_ diff --git a/hw/bsp/ch32v20x/boards/nanoch32v203/board.h b/hw/bsp/ch32v20x/boards/nanoch32v203/board.h index 64eaf931e..f02fceced 100644 --- a/hw/bsp/ch32v20x/boards/nanoch32v203/board.h +++ b/hw/bsp/ch32v20x/boards/nanoch32v203/board.h @@ -1,3 +1,8 @@ +/* metadata: + name: nanoCH32V203 + url: https://github.com/wuxx/nanoCH32V203 +*/ + #ifndef BOARD_H_ #define BOARD_H_ diff --git a/hw/bsp/ch32v20x/family.c b/hw/bsp/ch32v20x/family.c index 43dd7e032..5f52d9447 100644 --- a/hw/bsp/ch32v20x/family.c +++ b/hw/bsp/ch32v20x/family.c @@ -1,3 +1,7 @@ +/* metadata: +manufacturer: WCH +*/ + #include // https://github.com/openwch/ch32v307/pull/90 diff --git a/hw/bsp/ch32v307/boards/ch32v307v_r1_1v0/board.h b/hw/bsp/ch32v307/boards/ch32v307v_r1_1v0/board.h index 7b488096e..491347034 100644 --- a/hw/bsp/ch32v307/boards/ch32v307v_r1_1v0/board.h +++ b/hw/bsp/ch32v307/boards/ch32v307v_r1_1v0/board.h @@ -22,6 +22,11 @@ * THE SOFTWARE. */ +/* metadata: + name: CH32V307V-R1-1v0 + url: https://github.com/openwch/ch32v307/tree/main/SCHPCB/CH32V307V-R1-1v0 +*/ + #ifndef BOARD_H_ #define BOARD_H_ diff --git a/hw/bsp/ch32v307/family.c b/hw/bsp/ch32v307/family.c index adf2dbea5..48eb8a38c 100644 --- a/hw/bsp/ch32v307/family.c +++ b/hw/bsp/ch32v307/family.c @@ -24,6 +24,10 @@ * This file is part of the TinyUSB stack. */ +/* metadata: + manufacturer: WCH +*/ + #include "stdio.h" // https://github.com/openwch/ch32v307/pull/90 diff --git a/hw/bsp/da1469x/boards/da14695_dk_usb/board.h b/hw/bsp/da1469x/boards/da14695_dk_usb/board.h index 5efdd43e0..c0810c2b6 100644 --- a/hw/bsp/da1469x/boards/da14695_dk_usb/board.h +++ b/hw/bsp/da1469x/boards/da14695_dk_usb/board.h @@ -1,3 +1,8 @@ +/* metadata: + name: DA14695-00HQDEVKT-U + url: https://www.renesas.com/en/products/wireless-connectivity/bluetooth-low-energy/da14695-00hqdevkt-u-smartbond-da14695-bluetooth-low-energy-52-usb-development-kit +*/ + #ifndef BOARD_H #define BOARD_H diff --git a/hw/bsp/da1469x/boards/da1469x_dk_pro/board.h b/hw/bsp/da1469x/boards/da1469x_dk_pro/board.h index f969acf90..2b61e810e 100644 --- a/hw/bsp/da1469x/boards/da1469x_dk_pro/board.h +++ b/hw/bsp/da1469x/boards/da1469x_dk_pro/board.h @@ -1,3 +1,8 @@ +/* metadata: + name: DA1469x Development Kit Pro + url: https://lpccs-docs.renesas.com/um-b-090-da1469x_getting_started/DA1469x_The_hardware/DA1469x_The_hardware.html +*/ + #ifndef BOARD_H #define BOARD_H diff --git a/hw/bsp/da1469x/family.c b/hw/bsp/da1469x/family.c index 70bedf6d9..a64ffce67 100644 --- a/hw/bsp/da1469x/family.c +++ b/hw/bsp/da1469x/family.c @@ -24,6 +24,10 @@ * This file is part of the TinyUSB stack. */ +/* metadata: + manufacturer: Renesas +*/ + #include "bsp/board_api.h" #include "board.h" #include diff --git a/hw/bsp/espressif/boards/adafruit_feather_esp32_v2/board.h b/hw/bsp/espressif/boards/adafruit_feather_esp32_v2/board.h index 0c53df06b..15e5091f9 100644 --- a/hw/bsp/espressif/boards/adafruit_feather_esp32_v2/board.h +++ b/hw/bsp/espressif/boards/adafruit_feather_esp32_v2/board.h @@ -24,6 +24,11 @@ * This file is part of the TinyUSB stack. */ +/* metadata: + name: Adafruit Feather ESP32 v2 + url: https://www.adafruit.com/product/5400 +*/ + #ifndef BOARD_H_ #define BOARD_H_ diff --git a/hw/bsp/espressif/boards/adafruit_feather_esp32s2/board.h b/hw/bsp/espressif/boards/adafruit_feather_esp32s2/board.h index 9aa2e7535..0f607c755 100644 --- a/hw/bsp/espressif/boards/adafruit_feather_esp32s2/board.h +++ b/hw/bsp/espressif/boards/adafruit_feather_esp32s2/board.h @@ -24,6 +24,11 @@ * This file is part of the TinyUSB stack. */ +/* metadata: + name: Adafruit Feather ESP32S2 + url: https://www.adafruit.com/product/5000 +*/ + #ifndef BOARD_H_ #define BOARD_H_ diff --git a/hw/bsp/espressif/boards/adafruit_feather_esp32s3/board.h b/hw/bsp/espressif/boards/adafruit_feather_esp32s3/board.h index 9aa2e7535..35c268cf5 100644 --- a/hw/bsp/espressif/boards/adafruit_feather_esp32s3/board.h +++ b/hw/bsp/espressif/boards/adafruit_feather_esp32s3/board.h @@ -24,6 +24,11 @@ * This file is part of the TinyUSB stack. */ +/* metadata: + name: Adafruit Feather ESP32S3 + url: https://www.adafruit.com/product/5323 +*/ + #ifndef BOARD_H_ #define BOARD_H_ diff --git a/hw/bsp/espressif/boards/adafruit_magtag_29gray/board.h b/hw/bsp/espressif/boards/adafruit_magtag_29gray/board.h index 084a7aaf2..b86089400 100644 --- a/hw/bsp/espressif/boards/adafruit_magtag_29gray/board.h +++ b/hw/bsp/espressif/boards/adafruit_magtag_29gray/board.h @@ -24,6 +24,11 @@ * This file is part of the TinyUSB stack. */ +/* metadata: + name: Adafruit MagTag 2.9" Grayscale + url: https://www.adafruit.com/product/4800 +*/ + #ifndef BOARD_H_ #define BOARD_H_ diff --git a/hw/bsp/espressif/boards/adafruit_metro_esp32s2/board.h b/hw/bsp/espressif/boards/adafruit_metro_esp32s2/board.h index 137ea71ae..bc45678f7 100644 --- a/hw/bsp/espressif/boards/adafruit_metro_esp32s2/board.h +++ b/hw/bsp/espressif/boards/adafruit_metro_esp32s2/board.h @@ -24,6 +24,11 @@ * This file is part of the TinyUSB stack. */ +/* metadata: + name: Adafruit Metro ESP32-S2 + url: https://www.adafruit.com/product/4775 +*/ + #ifndef BOARD_H_ #define BOARD_H_ diff --git a/hw/bsp/espressif/boards/espressif_addax_1/board.h b/hw/bsp/espressif/boards/espressif_addax_1/board.h index d4690f732..4a4a15e1b 100644 --- a/hw/bsp/espressif/boards/espressif_addax_1/board.h +++ b/hw/bsp/espressif/boards/espressif_addax_1/board.h @@ -24,6 +24,11 @@ * This file is part of the TinyUSB stack. */ +/* metadata: + name: Espresif Addax-1 + url: n/a +*/ + #ifndef BOARD_H_ #define BOARD_H_ diff --git a/hw/bsp/espressif/boards/espressif_c3_devkitc/board.h b/hw/bsp/espressif/boards/espressif_c3_devkitc/board.h index 243dd47f6..a03cb5052 100644 --- a/hw/bsp/espressif/boards/espressif_c3_devkitc/board.h +++ b/hw/bsp/espressif/boards/espressif_c3_devkitc/board.h @@ -24,6 +24,11 @@ * This file is part of the TinyUSB stack. */ +/* metadata: + name: Espresif C3 DevKitC + url: https://docs.espressif.com/projects/esp-dev-kits/en/latest/esp32c3/esp32-c3-devkitc-02/index.html +*/ + #ifndef BOARD_H_ #define BOARD_H_ diff --git a/hw/bsp/espressif/boards/espressif_c6_devkitc/board.h b/hw/bsp/espressif/boards/espressif_c6_devkitc/board.h index 243dd47f6..eedd36a89 100644 --- a/hw/bsp/espressif/boards/espressif_c6_devkitc/board.h +++ b/hw/bsp/espressif/boards/espressif_c6_devkitc/board.h @@ -24,6 +24,11 @@ * This file is part of the TinyUSB stack. */ +/* metadata: + name: Espresif C6 DevKitC + url: https://docs.espressif.com/projects/esp-dev-kits/en/latest/esp32c6/esp32-c6-devkitc-1/index.html +*/ + #ifndef BOARD_H_ #define BOARD_H_ diff --git a/hw/bsp/espressif/boards/espressif_kaluga_1/board.h b/hw/bsp/espressif/boards/espressif_kaluga_1/board.h index 613e6ae0c..d49dc2af6 100644 --- a/hw/bsp/espressif/boards/espressif_kaluga_1/board.h +++ b/hw/bsp/espressif/boards/espressif_kaluga_1/board.h @@ -24,6 +24,11 @@ * This file is part of the TinyUSB stack. */ +/* metadata: + name: Espresif Kaluga 1 + url: https://docs.espressif.com/projects/esp-dev-kits/en/latest/esp32s2/esp32-s2-kaluga-1/index.html +*/ + #ifndef BOARD_H_ #define BOARD_H_ diff --git a/hw/bsp/espressif/boards/espressif_p4_function_ev/board.h b/hw/bsp/espressif/boards/espressif_p4_function_ev/board.h index e57f7c51f..6f3229b70 100644 --- a/hw/bsp/espressif/boards/espressif_p4_function_ev/board.h +++ b/hw/bsp/espressif/boards/espressif_p4_function_ev/board.h @@ -24,6 +24,11 @@ * This file is part of the TinyUSB stack. */ +/* metadata: + name: Espresif P4 Function EV + url: https://docs.espressif.com/projects/esp-dev-kits/en/latest/esp32p4/esp32-p4-function-ev-board/index.html +*/ + #ifndef BOARD_H_ #define BOARD_H_ diff --git a/hw/bsp/espressif/boards/espressif_s2_devkitc/board.h b/hw/bsp/espressif/boards/espressif_s2_devkitc/board.h index e068efef9..9c197591f 100644 --- a/hw/bsp/espressif/boards/espressif_s2_devkitc/board.h +++ b/hw/bsp/espressif/boards/espressif_s2_devkitc/board.h @@ -24,6 +24,11 @@ * This file is part of the TinyUSB stack. */ +/* metadata: + name: Espresif S2 DevKitC + url: https://docs.espressif.com/projects/esp-dev-kits/en/latest/esp32s2/esp32-s2-devkitc-1/index.html +*/ + #ifndef BOARD_H_ #define BOARD_H_ diff --git a/hw/bsp/espressif/boards/espressif_s3_devkitc/board.h b/hw/bsp/espressif/boards/espressif_s3_devkitc/board.h index a319fbc61..6d7a94668 100644 --- a/hw/bsp/espressif/boards/espressif_s3_devkitc/board.h +++ b/hw/bsp/espressif/boards/espressif_s3_devkitc/board.h @@ -24,6 +24,11 @@ * This file is part of the TinyUSB stack. */ +/* metadata: + name: Espresif S3 DevKitC + url: https://docs.espressif.com/projects/esp-dev-kits/en/latest/esp32s3/esp32-s3-devkitc-1/index.html +*/ + #ifndef BOARD_H_ #define BOARD_H_ diff --git a/hw/bsp/espressif/boards/espressif_s3_devkitm/board.h b/hw/bsp/espressif/boards/espressif_s3_devkitm/board.h index a319fbc61..d01fdbe5b 100644 --- a/hw/bsp/espressif/boards/espressif_s3_devkitm/board.h +++ b/hw/bsp/espressif/boards/espressif_s3_devkitm/board.h @@ -24,6 +24,11 @@ * This file is part of the TinyUSB stack. */ +/* metadata: + name: Espresif S3 DevKitM + url: https://docs.espressif.com/projects/esp-dev-kits/en/latest/esp32s3/esp32-s3-devkitm-1/index.html +*/ + #ifndef BOARD_H_ #define BOARD_H_ diff --git a/hw/bsp/espressif/boards/espressif_saola_1/board.h b/hw/bsp/espressif/boards/espressif_saola_1/board.h index e068efef9..ea369f19c 100644 --- a/hw/bsp/espressif/boards/espressif_saola_1/board.h +++ b/hw/bsp/espressif/boards/espressif_saola_1/board.h @@ -24,6 +24,11 @@ * This file is part of the TinyUSB stack. */ +/* metadata: + name: Espresif S2 Saola 1 + url: https://docs.espressif.com/projects/esp-dev-kits/en/latest/esp32s2/esp32-s2-saola-1/index.html +*/ + #ifndef BOARD_H_ #define BOARD_H_ diff --git a/hw/bsp/espressif/boards/family.c b/hw/bsp/espressif/boards/family.c index 048b431fb..26e415d94 100644 --- a/hw/bsp/espressif/boards/family.c +++ b/hw/bsp/espressif/boards/family.c @@ -24,6 +24,10 @@ * This file is part of the TinyUSB stack. */ +/* metadata: + manufacturer: Espressif +*/ + #include "bsp/board_api.h" #include "board.h" diff --git a/hw/bsp/f1c100s/boards/f1c100s/board.h b/hw/bsp/f1c100s/boards/f1c100s/board.h index 3b56a3a57..44b78f8fb 100644 --- a/hw/bsp/f1c100s/boards/f1c100s/board.h +++ b/hw/bsp/f1c100s/boards/f1c100s/board.h @@ -1,3 +1,8 @@ +/* metadata: + name: Lctech Pi F1C200s + url: https://linux-sunxi.org/Lctech_Pi_F1C200s +*/ + #ifndef BOARD_H #define BOARD_H diff --git a/hw/bsp/f1c100s/family.c b/hw/bsp/f1c100s/family.c index 6df4a0ed8..9e864363f 100644 --- a/hw/bsp/f1c100s/family.c +++ b/hw/bsp/f1c100s/family.c @@ -24,6 +24,10 @@ * This file is part of the TinyUSB stack. */ +/* metadata: + manufacturer: Sunxi +*/ + #include #include #include diff --git a/hw/bsp/fomu/boards/fomu/board.h b/hw/bsp/fomu/boards/fomu/board.h index 666ba1d98..2651c823d 100644 --- a/hw/bsp/fomu/boards/fomu/board.h +++ b/hw/bsp/fomu/boards/fomu/board.h @@ -24,6 +24,11 @@ * This file is part of the TinyUSB stack. */ +/* metadata: + name: fomu + url: https://tomu.im/fomu.html +*/ + #ifndef BOARD_H_ #define BOARD_H_ diff --git a/hw/bsp/fomu/family.c b/hw/bsp/fomu/family.c index ccf2b12f4..61943cb01 100644 --- a/hw/bsp/fomu/family.c +++ b/hw/bsp/fomu/family.c @@ -24,6 +24,10 @@ * This file is part of the TinyUSB stack. */ +/* metadata: + manufacturer: Tomu +*/ + #include #include #include "csr.h" diff --git a/hw/bsp/gd32vf103/boards/sipeed_longan_nano/board.h b/hw/bsp/gd32vf103/boards/sipeed_longan_nano/board.h index fae7c40b7..cb564a340 100644 --- a/hw/bsp/gd32vf103/boards/sipeed_longan_nano/board.h +++ b/hw/bsp/gd32vf103/boards/sipeed_longan_nano/board.h @@ -1,3 +1,8 @@ +/* metadata: + name: Sipeed Longan Nano + url: https://longan.sipeed.com/en/ +*/ + #ifndef _NUCLEI_SDK_HAL_H #define _NUCLEI_SDK_HAL_H diff --git a/hw/bsp/gd32vf103/family.c b/hw/bsp/gd32vf103/family.c index d4a819fb3..9d15755fc 100644 --- a/hw/bsp/gd32vf103/family.c +++ b/hw/bsp/gd32vf103/family.c @@ -24,6 +24,10 @@ * This file is part of the TinyUSB stack. */ +/* metadata: + manufacturer: GigaDevice +*/ + #include "drv_usb_hw.h" #include "drv_usb_dev.h" diff --git a/hw/bsp/imxrt/boards/metro_m7_1011/board.h b/hw/bsp/imxrt/boards/metro_m7_1011/board.h index 24141f5f4..ccc4d6b9a 100644 --- a/hw/bsp/imxrt/boards/metro_m7_1011/board.h +++ b/hw/bsp/imxrt/boards/metro_m7_1011/board.h @@ -24,6 +24,11 @@ * This file is part of the TinyUSB stack. */ +/* metadata: + name: Adafruit Metro M7 1011 + url: https://www.adafruit.com/product/5600 +*/ + #ifndef BOARD_M7_1011_H_ #define BOARD_M7_1011_H_ diff --git a/hw/bsp/imxrt/boards/metro_m7_1011_sd/board.h b/hw/bsp/imxrt/boards/metro_m7_1011_sd/board.h index 343e17f81..04d5b01b5 100644 --- a/hw/bsp/imxrt/boards/metro_m7_1011_sd/board.h +++ b/hw/bsp/imxrt/boards/metro_m7_1011_sd/board.h @@ -24,6 +24,11 @@ * This file is part of the TinyUSB stack. */ +/* metadata: + name: Adafruit Metro M7 1011 SD + url: https://www.adafruit.com/product/5600 +*/ + #ifndef BOARD_METRO_M7_1011_SD_H_ #define BOARD_METRO_M7_1011_SD_H_ diff --git a/hw/bsp/imxrt/boards/mimxrt1010_evk/board.h b/hw/bsp/imxrt/boards/mimxrt1010_evk/board.h index da12075a0..6b9ec0ae1 100644 --- a/hw/bsp/imxrt/boards/mimxrt1010_evk/board.h +++ b/hw/bsp/imxrt/boards/mimxrt1010_evk/board.h @@ -24,6 +24,11 @@ * This file is part of the TinyUSB stack. */ +/* metadata: + name: i.MX RT1010 Evaluation Kit + url: https://www.nxp.com/design/design-center/development-boards-and-designs/i-mx-evaluation-and-development-boards/i-mx-rt1010-evaluation-kit:MIMXRT1010-EVK +*/ + #ifndef BOARD_MIMXRT1010_EVK_H_ #define BOARD_MIMXRT1010_EVK_H_ diff --git a/hw/bsp/imxrt/boards/mimxrt1015_evk/board.h b/hw/bsp/imxrt/boards/mimxrt1015_evk/board.h index 6ac78453f..e2ec4e627 100644 --- a/hw/bsp/imxrt/boards/mimxrt1015_evk/board.h +++ b/hw/bsp/imxrt/boards/mimxrt1015_evk/board.h @@ -24,6 +24,11 @@ * This file is part of the TinyUSB stack. */ +/* metadata: + name: i.MX RT1015 Evaluation Kit + url: https://www.nxp.com/design/design-center/development-boards-and-designs/MIMXRT1015-EVK +*/ + #ifndef BOARD_MIMXRT1015_EVK_H_ #define BOARD_MIMXRT1015_EVK_H_ diff --git a/hw/bsp/imxrt/boards/mimxrt1020_evk/board.h b/hw/bsp/imxrt/boards/mimxrt1020_evk/board.h index 4f4593524..3f9c97e11 100644 --- a/hw/bsp/imxrt/boards/mimxrt1020_evk/board.h +++ b/hw/bsp/imxrt/boards/mimxrt1020_evk/board.h @@ -24,6 +24,11 @@ * This file is part of the TinyUSB stack. */ +/* metadata: + name: i.MX RT1020 Evaluation Kit + url: https://www.nxp.com/design/design-center/development-boards-and-designs/MIMXRT1020-EVK +*/ + #ifndef BOARD_MIMXRT1020_EVK_H_ #define BOARD_MIMXRT1020_EVK_H_ diff --git a/hw/bsp/imxrt/boards/mimxrt1024_evk/board.h b/hw/bsp/imxrt/boards/mimxrt1024_evk/board.h index 27a64b464..39e63c472 100644 --- a/hw/bsp/imxrt/boards/mimxrt1024_evk/board.h +++ b/hw/bsp/imxrt/boards/mimxrt1024_evk/board.h @@ -24,6 +24,11 @@ * This file is part of the TinyUSB stack. */ +/* metadata: + name: i.MX RT1024 Evaluation Kit + url: https://www.nxp.com/design/design-center/development-boards-and-designs/i-mx-evaluation-and-development-boards/i-mx-rt1024-evaluation-kit:MIMXRT1024-EVK +*/ + #ifndef BOARD_MIMXRT1024_EVK_H_ #define BOARD_MIMXRT1024_EVK_H_ diff --git a/hw/bsp/imxrt/boards/mimxrt1050_evkb/board.h b/hw/bsp/imxrt/boards/mimxrt1050_evkb/board.h index 97d1e446c..de7ab0535 100644 --- a/hw/bsp/imxrt/boards/mimxrt1050_evkb/board.h +++ b/hw/bsp/imxrt/boards/mimxrt1050_evkb/board.h @@ -24,6 +24,11 @@ * This file is part of the TinyUSB stack. */ +/* metadata: + name: i.MX RT1050 Evaluation Kit revB + url: https://www.nxp.com/part/IMXRT1050-EVKB +*/ + #ifndef BOARD_MIMXRT1050_EVKB_H_ #define BOARD_MIMXRT1050_EVKB_H_ diff --git a/hw/bsp/imxrt/boards/mimxrt1060_evk/board.h b/hw/bsp/imxrt/boards/mimxrt1060_evk/board.h index 40b99860f..5bbacadaf 100644 --- a/hw/bsp/imxrt/boards/mimxrt1060_evk/board.h +++ b/hw/bsp/imxrt/boards/mimxrt1060_evk/board.h @@ -24,6 +24,11 @@ * This file is part of the TinyUSB stack. */ +/* metadata: + name: i.MX RT1060 Evaluation Kit revB + url: https://www.nxp.com/design/design-center/development-boards-and-designs/MIMXRT1060-EVKB +*/ + #ifndef BOARD_MIMXRT1060_EVKB_H_ #define BOARD_MIMXRT1060_EVKB_H_ diff --git a/hw/bsp/imxrt/boards/mimxrt1064_evk/board.h b/hw/bsp/imxrt/boards/mimxrt1064_evk/board.h index 7fca5adef..6dc01e3e7 100644 --- a/hw/bsp/imxrt/boards/mimxrt1064_evk/board.h +++ b/hw/bsp/imxrt/boards/mimxrt1064_evk/board.h @@ -24,6 +24,11 @@ * This file is part of the TinyUSB stack. */ +/* metadata: + name: i.MX RT1064 Evaluation Kit + url: https://www.nxp.com/design/design-center/development-boards-and-designs/MIMXRT1064-EVK +*/ + #ifndef BOARD_MIMXRT1064_EVKB_H_ #define BOARD_MIMXRT1064_EVKB_H_ diff --git a/hw/bsp/imxrt/boards/mimxrt1170_evkb/board.h b/hw/bsp/imxrt/boards/mimxrt1170_evkb/board.h index 303935517..c5d54b7a7 100644 --- a/hw/bsp/imxrt/boards/mimxrt1170_evkb/board.h +++ b/hw/bsp/imxrt/boards/mimxrt1170_evkb/board.h @@ -24,6 +24,11 @@ * This file is part of the TinyUSB stack. */ +/* metadata: + name: i.MX RT1070 Evaluation Kit + url: https://www.nxp.com/design/design-center/development-boards-and-designs/i-mx-evaluation-and-development-boards/i-mx-rt1170-evaluation-kit:MIMXRT1170-EVKB +*/ + #ifndef BOARD_MIMXRT1170_EVKB_H_ #define BOARD_MIMXRT1170_EVKB_H_ diff --git a/hw/bsp/imxrt/boards/teensy_40/board.h b/hw/bsp/imxrt/boards/teensy_40/board.h index 4a173c834..ae749e894 100644 --- a/hw/bsp/imxrt/boards/teensy_40/board.h +++ b/hw/bsp/imxrt/boards/teensy_40/board.h @@ -24,11 +24,14 @@ * This file is part of the TinyUSB stack. */ +/* metadata: + name: Teensy 4.0 + url: https://www.pjrc.com/store/teensy40.html +*/ #ifndef BOARD_H_ #define BOARD_H_ - // required since iMXRT MCUX-SDK include this file for board size #define BOARD_FLASH_SIZE (2 * 1024 * 1024) diff --git a/hw/bsp/imxrt/boards/teensy_41/board.h b/hw/bsp/imxrt/boards/teensy_41/board.h index 358684126..1bc022c54 100644 --- a/hw/bsp/imxrt/boards/teensy_41/board.h +++ b/hw/bsp/imxrt/boards/teensy_41/board.h @@ -24,11 +24,14 @@ * This file is part of the TinyUSB stack. */ +/* metadata: + name: Teensy 4.1 + url: https://www.pjrc.com/store/teensy41.html +*/ #ifndef BOARD_H_ #define BOARD_H_ - // required since iMXRT MCUX-SDK include this file for board size #define BOARD_FLASH_SIZE (8 * 1024 * 1024) diff --git a/hw/bsp/imxrt/family.c b/hw/bsp/imxrt/family.c index f365981f5..ad529a227 100644 --- a/hw/bsp/imxrt/family.c +++ b/hw/bsp/imxrt/family.c @@ -24,6 +24,10 @@ * This file is part of the TinyUSB stack. */ +/* metadata: + manufacturer: NXP +*/ + #include "bsp/board_api.h" #include "board/clock_config.h" #include "board/pin_mux.h" diff --git a/hw/bsp/kinetis_k/boards/frdm_k64f/board.h b/hw/bsp/kinetis_k/boards/frdm_k64f/board.h index ae8c66182..75a10f961 100644 --- a/hw/bsp/kinetis_k/boards/frdm_k64f/board.h +++ b/hw/bsp/kinetis_k/boards/frdm_k64f/board.h @@ -22,6 +22,11 @@ * THE SOFTWARE. */ +/* metadata: + name: Freedom K64F + url: https://www.nxp.com/design/design-center/development-boards-and-designs/general-purpose-mcus/freedom-development-platform-for-kinetis-k64-k63-and-k24-mcus:FRDM-K64F +*/ + #ifndef BOARD_H #define BOARD_H diff --git a/hw/bsp/kinetis_k/boards/teensy_35/board.h b/hw/bsp/kinetis_k/boards/teensy_35/board.h index f8173447a..4718a0241 100644 --- a/hw/bsp/kinetis_k/boards/teensy_35/board.h +++ b/hw/bsp/kinetis_k/boards/teensy_35/board.h @@ -22,6 +22,11 @@ * THE SOFTWARE. */ +/* metadata: + name: Teensy 3.5 + url: https://www.pjrc.com/store/teensy35.html +*/ + #ifndef BOARD_H #define BOARD_H diff --git a/hw/bsp/kinetis_k/family.c b/hw/bsp/kinetis_k/family.c index 30dfe6d76..59d80fa18 100644 --- a/hw/bsp/kinetis_k/family.c +++ b/hw/bsp/kinetis_k/family.c @@ -23,6 +23,10 @@ * THE SOFTWARE. */ +/* metadata: + manufacturer: NXP +*/ + #include "bsp/board_api.h" #include "board.h" #include "fsl_device_registers.h" diff --git a/hw/bsp/kinetis_k32l2/boards/frdm_k32l2a4s/board.h b/hw/bsp/kinetis_k32l2/boards/frdm_k32l2a4s/board.h index 16f832722..9e2534307 100644 --- a/hw/bsp/kinetis_k32l2/boards/frdm_k32l2a4s/board.h +++ b/hw/bsp/kinetis_k32l2/boards/frdm_k32l2a4s/board.h @@ -24,6 +24,10 @@ * This file is part of the TinyUSB stack. */ +/* metadata: + name: Freedom K32L2A4S + url: https://www.nxp.com/design/design-center/development-boards-and-designs/FRDM-K32L2A4S +*/ #ifndef BOARD_H_ #define BOARD_H_ diff --git a/hw/bsp/kinetis_k32l2/boards/frdm_k32l2b/board.h b/hw/bsp/kinetis_k32l2/boards/frdm_k32l2b/board.h index 790d6fcb0..854340d6d 100644 --- a/hw/bsp/kinetis_k32l2/boards/frdm_k32l2b/board.h +++ b/hw/bsp/kinetis_k32l2/boards/frdm_k32l2b/board.h @@ -24,6 +24,10 @@ * This file is part of the TinyUSB stack. */ +/* metadata: + name: Freedom K32L2B3 + url: https://www.nxp.com/design/design-center/development-boards-and-designs/general-purpose-mcus/nxp-freedom-development-platform-for-k32-l2b-mcus:FRDM-K32L2B3 +*/ #ifndef BOARD_H_ #define BOARD_H_ diff --git a/hw/bsp/kinetis_k32l2/boards/kuiic/board.h b/hw/bsp/kinetis_k32l2/boards/kuiic/board.h index ec3702376..f5895fc65 100644 --- a/hw/bsp/kinetis_k32l2/boards/kuiic/board.h +++ b/hw/bsp/kinetis_k32l2/boards/kuiic/board.h @@ -24,6 +24,10 @@ * This file is part of the TinyUSB stack. */ +/* metadata: + name: Kuiic + url: https://github.com/nxf58843/kuiic +*/ #ifndef BOARD_H_ #define BOARD_H_ diff --git a/hw/bsp/kinetis_k32l2/family.c b/hw/bsp/kinetis_k32l2/family.c index 92f5ba6d3..2fcc1b2af 100644 --- a/hw/bsp/kinetis_k32l2/family.c +++ b/hw/bsp/kinetis_k32l2/family.c @@ -25,6 +25,10 @@ * This file is part of the TinyUSB stack. */ +/* metadata: + manufacturer: NXP +*/ + #include "fsl_gpio.h" #include "fsl_port.h" #include "fsl_clock.h" diff --git a/hw/bsp/kinetis_kl/boards/frdm_kl25z/board.h b/hw/bsp/kinetis_kl/boards/frdm_kl25z/board.h index 23f144666..b03fe91a8 100644 --- a/hw/bsp/kinetis_kl/boards/frdm_kl25z/board.h +++ b/hw/bsp/kinetis_kl/boards/frdm_kl25z/board.h @@ -22,6 +22,11 @@ * THE SOFTWARE. */ +/* metadata: + name: fomu + url: https://www.nxp.com/design/design-center/development-boards-and-designs/general-purpose-mcus/freedom-development-platform-for-kinetis-kl14-kl15-kl24-kl25-mcus:FRDM-KL25Z +*/ + #ifndef BOARD_H #define BOARD_H diff --git a/hw/bsp/kinetis_kl/family.c b/hw/bsp/kinetis_kl/family.c index 254a95176..fe864f3a0 100644 --- a/hw/bsp/kinetis_kl/family.c +++ b/hw/bsp/kinetis_kl/family.c @@ -23,6 +23,10 @@ * THE SOFTWARE. */ +/* metadata: + manufacturer: NXP +*/ + #include "bsp/board_api.h" #include "board.h" #include "fsl_device_registers.h" diff --git a/hw/bsp/lpc11/boards/lpcxpresso11u37/board.h b/hw/bsp/lpc11/boards/lpcxpresso11u37/board.h index 930462f28..c8a48eecb 100644 --- a/hw/bsp/lpc11/boards/lpcxpresso11u37/board.h +++ b/hw/bsp/lpc11/boards/lpcxpresso11u37/board.h @@ -1,3 +1,8 @@ +/* metadata: + name: LPCXpresso11U37 + url: https://www.nxp.com/design/design-center/development-boards-and-designs/OM13074 +*/ + #ifndef BOARD_H #define BOARD_H diff --git a/hw/bsp/lpc11/boards/lpcxpresso11u68/board.h b/hw/bsp/lpc11/boards/lpcxpresso11u68/board.h index a12fcbef1..50141e4a5 100644 --- a/hw/bsp/lpc11/boards/lpcxpresso11u68/board.h +++ b/hw/bsp/lpc11/boards/lpcxpresso11u68/board.h @@ -1,3 +1,8 @@ +/* metadata: + name: LPCXpresso11U68 + url: https://www.nxp.com/design/design-center/development-boards-and-designs/OM13058 +*/ + #ifndef BOARD_H #define BOARD_H diff --git a/hw/bsp/lpc11/family.c b/hw/bsp/lpc11/family.c index e75bc4919..566449ca0 100644 --- a/hw/bsp/lpc11/family.c +++ b/hw/bsp/lpc11/family.c @@ -24,6 +24,10 @@ * This file is part of the TinyUSB stack. */ +/* metadata: + manufacturer: NXP +*/ + #ifdef __GNUC__ #pragma GCC diagnostic push #pragma GCC diagnostic ignored "-Wunused-parameter" diff --git a/hw/bsp/lpc13/boards/lpcxpresso1347/board.h b/hw/bsp/lpc13/boards/lpcxpresso1347/board.h index 71e608b46..acf29fdc6 100644 --- a/hw/bsp/lpc13/boards/lpcxpresso1347/board.h +++ b/hw/bsp/lpc13/boards/lpcxpresso1347/board.h @@ -1,3 +1,8 @@ +/* metadata: + name: LPCXpresso1347 + url: https://www.nxp.com/products/no-longer-manufactured/lpcxpresso-board-for-lpc1347:OM13045 +*/ + #ifndef BOARD_H #define BOARD_H diff --git a/hw/bsp/lpc13/family.c b/hw/bsp/lpc13/family.c index 7e04c1cf5..1faa54485 100644 --- a/hw/bsp/lpc13/family.c +++ b/hw/bsp/lpc13/family.c @@ -24,6 +24,10 @@ * This file is part of the TinyUSB stack. */ +/* metadata: + manufacturer: NXP +*/ + #include "chip.h" #include "bsp/board_api.h" #include "board.h" diff --git a/hw/bsp/lpc15/boards/lpcxpresso1549/board.h b/hw/bsp/lpc15/boards/lpcxpresso1549/board.h index 5ed5b75b2..1be2045a9 100644 --- a/hw/bsp/lpc15/boards/lpcxpresso1549/board.h +++ b/hw/bsp/lpc15/boards/lpcxpresso1549/board.h @@ -24,6 +24,11 @@ * This file is part of the TinyUSB stack. */ +/* metadata: + name: LPCXpresso1549 + url: https://www.nxp.com/design/design-center/development-boards-and-designs/OM13056 +*/ + #ifndef BOARD_H_ #define BOARD_H_ diff --git a/hw/bsp/lpc15/family.c b/hw/bsp/lpc15/family.c index b9ce39648..e23fdec43 100644 --- a/hw/bsp/lpc15/family.c +++ b/hw/bsp/lpc15/family.c @@ -24,6 +24,10 @@ * This file is part of the TinyUSB stack. */ +/* metadata: + manufacturer: NXP +*/ + #ifdef __GNUC__ #pragma GCC diagnostic push #pragma GCC diagnostic ignored "-Wstrict-prototypes" diff --git a/hw/bsp/lpc17/boards/lpcxpresso1769/board.h b/hw/bsp/lpc17/boards/lpcxpresso1769/board.h index d6aa98ed9..6f5c12854 100644 --- a/hw/bsp/lpc17/boards/lpcxpresso1769/board.h +++ b/hw/bsp/lpc17/boards/lpcxpresso1769/board.h @@ -24,6 +24,11 @@ * This file is part of the TinyUSB stack. */ +/* metadata: + name: LPCXpresso1769 + url: https://www.nxp.com/design/design-center/development-boards-and-designs/OM13000 +*/ + #ifndef BOARD_H_ #define BOARD_H_ diff --git a/hw/bsp/lpc17/boards/mbed1768/board.h b/hw/bsp/lpc17/boards/mbed1768/board.h index 2b3ddc905..2c75cede4 100644 --- a/hw/bsp/lpc17/boards/mbed1768/board.h +++ b/hw/bsp/lpc17/boards/mbed1768/board.h @@ -24,6 +24,11 @@ * This file is part of the TinyUSB stack. */ +/* metadata: + name: mbed 1768 + url: https://www.nxp.com/products/processors-and-microcontrollers/arm-microcontrollers/general-purpose-mcus/lpc1700-arm-cortex-m3/arm-mbed-lpc1768-board:OM11043 +*/ + #ifndef BOARD_H_ #define BOARD_H_ diff --git a/hw/bsp/lpc17/family.c b/hw/bsp/lpc17/family.c index 79281ba41..7d3231f6a 100644 --- a/hw/bsp/lpc17/family.c +++ b/hw/bsp/lpc17/family.c @@ -24,6 +24,10 @@ * This file is part of the TinyUSB stack. */ +/* metadata: + manufacturer: NXP +*/ + #include "chip.h" #include "bsp/board_api.h" #include "board.h" diff --git a/hw/bsp/lpc18/boards/lpcxpresso18s37/board.h b/hw/bsp/lpc18/boards/lpcxpresso18s37/board.h index f4c85ddc9..2cf4dbdf8 100644 --- a/hw/bsp/lpc18/boards/lpcxpresso18s37/board.h +++ b/hw/bsp/lpc18/boards/lpcxpresso18s37/board.h @@ -24,6 +24,11 @@ * This file is part of the TinyUSB stack. */ +/* metadata: + name: LPCXpresso18s37 + url: https://www.nxp.com/design/design-center/software/development-software/mcuxpresso-software-and-tools-/lpcxpresso-boards/lpcxpresso18s37-development-board:OM13076 +*/ + #ifndef BOARD_H_ #define BOARD_H_ diff --git a/hw/bsp/lpc18/boards/mcb1800/board.h b/hw/bsp/lpc18/boards/mcb1800/board.h index 93b3cd112..dba7a62a3 100644 --- a/hw/bsp/lpc18/boards/mcb1800/board.h +++ b/hw/bsp/lpc18/boards/mcb1800/board.h @@ -24,6 +24,11 @@ * This file is part of the TinyUSB stack. */ +/* metadata: + name: Keil MCB1800 + url: https://www.keil.com/arm/mcb1800/ +*/ + #ifndef BOARD_H_ #define BOARD_H_ diff --git a/hw/bsp/lpc18/family.c b/hw/bsp/lpc18/family.c index 55ef31ee4..8f6dbcd4a 100644 --- a/hw/bsp/lpc18/family.c +++ b/hw/bsp/lpc18/family.c @@ -24,6 +24,10 @@ * This file is part of the TinyUSB stack. */ +/* metadata: + manufacturer: NXP +*/ + #include "chip.h" #include "bsp/board_api.h" #include "board.h" diff --git a/hw/bsp/lpc40/boards/ea4088_quickstart/board.h b/hw/bsp/lpc40/boards/ea4088_quickstart/board.h index d5489c154..ede0a306d 100644 --- a/hw/bsp/lpc40/boards/ea4088_quickstart/board.h +++ b/hw/bsp/lpc40/boards/ea4088_quickstart/board.h @@ -24,6 +24,11 @@ * This file is part of the TinyUSB stack. */ +/* metadata: + name: Embedded Artists LPC4088 QuickStart Board + url: https://www.embeddedartists.com/products/lpc4088-quickstart-board/ +*/ + #ifndef EA4088QS__BOARD_H #define EA4088QS__BOARD_H diff --git a/hw/bsp/lpc40/family.c b/hw/bsp/lpc40/family.c index d6c8ef32a..b8bc99452 100644 --- a/hw/bsp/lpc40/family.c +++ b/hw/bsp/lpc40/family.c @@ -24,6 +24,10 @@ * This file is part of the TinyUSB stack. */ +/* metadata: + manufacturer: NXP +*/ + #include "chip.h" #include "bsp/board_api.h" #include "board.h" diff --git a/hw/bsp/lpc43/boards/ea4357/board.h b/hw/bsp/lpc43/boards/ea4357/board.h index fb52e32a7..fca617361 100644 --- a/hw/bsp/lpc43/boards/ea4357/board.h +++ b/hw/bsp/lpc43/boards/ea4357/board.h @@ -24,6 +24,11 @@ * This file is part of the TinyUSB stack. */ +/* metadata: + name: Embedded Artists LPC4357 Development Kit + url: https://www.embeddedartists.com/products/lpc4357-developers-kit/ +*/ + #ifndef _BOARD_EA4357_H #define _BOARD_EA4357_H diff --git a/hw/bsp/lpc43/boards/lpcxpresso43s67/board.h b/hw/bsp/lpc43/boards/lpcxpresso43s67/board.h index 4dd90fe29..4427905e8 100644 --- a/hw/bsp/lpc43/boards/lpcxpresso43s67/board.h +++ b/hw/bsp/lpc43/boards/lpcxpresso43s67/board.h @@ -24,6 +24,11 @@ * This file is part of the TinyUSB stack. */ +/* metadata: + name: LPCXpresso43S67 + url: https://www.nxp.com/design/design-center/software/development-software/mcuxpresso-software-and-tools-/lpcxpresso-boards/lpcxpresso43s67-development-board:OM13084 +*/ + #ifndef _BOARD_LPCXPRESSO43S67_H_ #define _BOARD_LPCXPRESSO43S67_H_ diff --git a/hw/bsp/lpc43/family.c b/hw/bsp/lpc43/family.c index dfee9f5ea..fe6c7b0c8 100644 --- a/hw/bsp/lpc43/family.c +++ b/hw/bsp/lpc43/family.c @@ -24,6 +24,10 @@ * This file is part of the TinyUSB stack. */ +/* metadata: + manufacturer: NXP +*/ + // Suppress warning caused by mcu driver #ifdef __GNUC__ #pragma GCC diagnostic push diff --git a/hw/bsp/lpc51/boards/lpcxpresso51u68/board.h b/hw/bsp/lpc51/boards/lpcxpresso51u68/board.h index 0a3b37fda..151fae24b 100644 --- a/hw/bsp/lpc51/boards/lpcxpresso51u68/board.h +++ b/hw/bsp/lpc51/boards/lpcxpresso51u68/board.h @@ -1,3 +1,8 @@ +/* metadata: + name: LPCXpresso51u68 + url: https://www.nxp.com/products/processors-and-microcontrollers/arm-microcontrollers/general-purpose-mcus/lpcxpresso51u68-for-the-lpc51u68-mcus:OM40005 +*/ + #ifndef BOARD_H #define BOARD_H diff --git a/hw/bsp/lpc51/family.c b/hw/bsp/lpc51/family.c index a0667a741..0afe33d41 100644 --- a/hw/bsp/lpc51/family.c +++ b/hw/bsp/lpc51/family.c @@ -24,6 +24,10 @@ * This file is part of the TinyUSB stack. */ +/* metadata: + manufacturer: NXP +*/ + #include "fsl_device_registers.h" #include "fsl_gpio.h" #include "fsl_power.h" diff --git a/hw/bsp/lpc54/boards/lpcxpresso54114/board.h b/hw/bsp/lpc54/boards/lpcxpresso54114/board.h index b1ad4258c..c43ca9d7d 100644 --- a/hw/bsp/lpc54/boards/lpcxpresso54114/board.h +++ b/hw/bsp/lpc54/boards/lpcxpresso54114/board.h @@ -24,6 +24,11 @@ * This file is part of the TinyUSB stack. */ +/* metadata: + name: LPCXpresso54114 + url: https://www.nxp.com/design/design-center/software/development-software/mcuxpresso-software-and-tools-/lpcxpresso-boards/lpcxpresso54114-board:OM13089 +*/ + #ifndef BOARD_H_ #define BOARD_H_ diff --git a/hw/bsp/lpc54/boards/lpcxpresso54608/board.h b/hw/bsp/lpc54/boards/lpcxpresso54608/board.h index 8bbe18155..e985e97e0 100644 --- a/hw/bsp/lpc54/boards/lpcxpresso54608/board.h +++ b/hw/bsp/lpc54/boards/lpcxpresso54608/board.h @@ -24,6 +24,11 @@ * This file is part of the TinyUSB stack. */ +/* metadata: + name: LPCXpresso54608 + url: https://www.nxp.com/design/design-center/software/development-software/mcuxpresso-software-and-tools-/lpcxpresso-development-board-for-lpc5460x-mcus:OM13092 +*/ + #ifndef BOARD_LPCXPRESSO54608_H_ #define BOARD_LPCXPRESSO54608_H_ diff --git a/hw/bsp/lpc54/boards/lpcxpresso54628/board.h b/hw/bsp/lpc54/boards/lpcxpresso54628/board.h index 670277512..837d26aef 100644 --- a/hw/bsp/lpc54/boards/lpcxpresso54628/board.h +++ b/hw/bsp/lpc54/boards/lpcxpresso54628/board.h @@ -24,6 +24,11 @@ * This file is part of the TinyUSB stack. */ +/* metadata: + name: LPCXpresso54628 + url: https://www.nxp.com/design/design-center/software/development-software/mcuxpresso-software-and-tools-/lpcxpresso-boards/lpcxpresso54628-development-board:OM13098 +*/ + #ifndef BOARD_H_ #define BOARD_H_ diff --git a/hw/bsp/lpc54/family.c b/hw/bsp/lpc54/family.c index 5e6ff2231..9b9b5841b 100644 --- a/hw/bsp/lpc54/family.c +++ b/hw/bsp/lpc54/family.c @@ -24,6 +24,10 @@ * This file is part of the TinyUSB stack. */ +/* metadata: + manufacturer: NXP +*/ + #include "fsl_device_registers.h" #include "fsl_gpio.h" #include "fsl_power.h" diff --git a/hw/bsp/lpc55/boards/double_m33_express/board.h b/hw/bsp/lpc55/boards/double_m33_express/board.h index 975e74e92..dc11e47fc 100644 --- a/hw/bsp/lpc55/boards/double_m33_express/board.h +++ b/hw/bsp/lpc55/boards/double_m33_express/board.h @@ -24,6 +24,11 @@ * This file is part of the TinyUSB stack. */ +/* metadata: + name: Double M33 Express + url: https://www.crowdsupply.com/steiert-solutions/double-m33-express +*/ + #ifndef BOARD_H_ #define BOARD_H_ diff --git a/hw/bsp/lpc55/boards/lpcxpresso55s28/board.h b/hw/bsp/lpc55/boards/lpcxpresso55s28/board.h index f85701b08..907aee6a4 100644 --- a/hw/bsp/lpc55/boards/lpcxpresso55s28/board.h +++ b/hw/bsp/lpc55/boards/lpcxpresso55s28/board.h @@ -24,6 +24,11 @@ * This file is part of the TinyUSB stack. */ +/* metadata: + name: LPCXpresso55s28 + url: https://www.nxp.com/design/design-center/software/development-software/mcuxpresso-software-and-tools-/lpcxpresso-boards/lpcxpresso55s28-development-board:LPC55S28-EVK +*/ + #ifndef BOARD_H_ #define BOARD_H_ diff --git a/hw/bsp/lpc55/boards/lpcxpresso55s69/board.h b/hw/bsp/lpc55/boards/lpcxpresso55s69/board.h index f85701b08..e18d5bbad 100644 --- a/hw/bsp/lpc55/boards/lpcxpresso55s69/board.h +++ b/hw/bsp/lpc55/boards/lpcxpresso55s69/board.h @@ -24,6 +24,11 @@ * This file is part of the TinyUSB stack. */ +/* metadata: + name: LPCXpresso55s69 + url: https://www.nxp.com/design/design-center/software/development-software/mcuxpresso-software-and-tools-/lpcxpresso-boards/lpcxpresso55s69-development-board:LPC55S69-EVK +*/ + #ifndef BOARD_H_ #define BOARD_H_ diff --git a/hw/bsp/lpc55/boards/mcu_link/board.h b/hw/bsp/lpc55/boards/mcu_link/board.h index 5e17cf9fd..1d71b3e79 100644 --- a/hw/bsp/lpc55/boards/mcu_link/board.h +++ b/hw/bsp/lpc55/boards/mcu_link/board.h @@ -24,6 +24,11 @@ * This file is part of the TinyUSB stack. */ +/* metadata: + name: MCU Link + url: https://www.nxp.com/design/design-center/software/development-software/mcuxpresso-software-and-tools-/mcu-link-debug-probe:MCU-LINK +*/ + #ifndef BOARD_H_ #define BOARD_H_ diff --git a/hw/bsp/lpc55/family.c b/hw/bsp/lpc55/family.c index 68ccf52d5..dbf8d71b7 100644 --- a/hw/bsp/lpc55/family.c +++ b/hw/bsp/lpc55/family.c @@ -24,6 +24,10 @@ * This file is part of the TinyUSB stack. */ +/* metadata: + manufacturer: NXP +*/ + #include "bsp/board_api.h" #include "board.h" #include "fsl_device_registers.h" diff --git a/hw/bsp/max32650/boards/max32650evkit/board.h b/hw/bsp/max32650/boards/max32650evkit/board.h index 196abdaca..65ed2659e 100644 --- a/hw/bsp/max32650/boards/max32650evkit/board.h +++ b/hw/bsp/max32650/boards/max32650evkit/board.h @@ -24,6 +24,11 @@ * This file is part of the TinyUSB stack. */ +/* metadata: + name: MAX32650 EVKIT + url: https://www.analog.com/en/resources/evaluation-hardware-and-software/evaluation-boards-kits/max32650-evkit.html#eb-overview +*/ + #ifndef BOARD_H_ #define BOARD_H_ diff --git a/hw/bsp/max32650/boards/max32650fthr/board.h b/hw/bsp/max32650/boards/max32650fthr/board.h index d80a8fcae..755fa15b5 100644 --- a/hw/bsp/max32650/boards/max32650fthr/board.h +++ b/hw/bsp/max32650/boards/max32650fthr/board.h @@ -24,6 +24,11 @@ * This file is part of the TinyUSB stack. */ +/* metadata: + name: MAX32650 Feather + url: https://www.analog.com/en/resources/evaluation-hardware-and-software/evaluation-boards-kits/max32650fthr.html +*/ + #ifndef BOARD_H_ #define BOARD_H_ diff --git a/hw/bsp/max32650/boards/max32651evkit/board.h b/hw/bsp/max32650/boards/max32651evkit/board.h index 196abdaca..0b49ff309 100644 --- a/hw/bsp/max32650/boards/max32651evkit/board.h +++ b/hw/bsp/max32650/boards/max32651evkit/board.h @@ -24,6 +24,11 @@ * This file is part of the TinyUSB stack. */ +/* metadata: + name: MAX32651 EVKIT + url: https://www.analog.com/en/resources/evaluation-hardware-and-software/evaluation-boards-kits/max32651-evkit.html +*/ + #ifndef BOARD_H_ #define BOARD_H_ diff --git a/hw/bsp/max32650/family.c b/hw/bsp/max32650/family.c index bb382cdd4..8f0e56734 100644 --- a/hw/bsp/max32650/family.c +++ b/hw/bsp/max32650/family.c @@ -24,6 +24,10 @@ * This file is part of the TinyUSB stack. */ +/* metadata: + manufacturer: Analog Devices +*/ + #ifdef __GNUC__ #pragma GCC diagnostic push #pragma GCC diagnostic ignored "-Wstrict-prototypes" // _mxc_crit_get_state() diff --git a/hw/bsp/max32666/boards/max32666evkit/board.h b/hw/bsp/max32666/boards/max32666evkit/board.h index 0ab1483b8..54589444d 100644 --- a/hw/bsp/max32666/boards/max32666evkit/board.h +++ b/hw/bsp/max32666/boards/max32666evkit/board.h @@ -24,6 +24,11 @@ * This file is part of the TinyUSB stack. */ +/* metadata: + name: MAX32666 EVKIT + url: https://www.analog.com/en/resources/evaluation-hardware-and-software/evaluation-boards-kits/max32666evkit.html +*/ + #ifndef BOARD_H_ #define BOARD_H_ diff --git a/hw/bsp/max32666/boards/max32666fthr/board.h b/hw/bsp/max32666/boards/max32666fthr/board.h index c719b748a..0caea5934 100644 --- a/hw/bsp/max32666/boards/max32666fthr/board.h +++ b/hw/bsp/max32666/boards/max32666fthr/board.h @@ -24,6 +24,11 @@ * This file is part of the TinyUSB stack. */ +/* metadata: + name: MAX32666 Feather + url: https://www.analog.com/en/resources/evaluation-hardware-and-software/evaluation-boards-kits/max32666fthr.html +*/ + #ifndef BOARD_H_ #define BOARD_H_ diff --git a/hw/bsp/max32666/family.c b/hw/bsp/max32666/family.c index f96393fe1..05306c6c9 100644 --- a/hw/bsp/max32666/family.c +++ b/hw/bsp/max32666/family.c @@ -24,6 +24,10 @@ * This file is part of the TinyUSB stack. */ +/* metadata: + manufacturer: Analog Devices +*/ + #ifdef __GNUC__ #pragma GCC diagnostic push #pragma GCC diagnostic ignored "-Wstrict-prototypes" // _mxc_crit_get_state() diff --git a/hw/bsp/max32690/boards/apard32690/board.h b/hw/bsp/max32690/boards/apard32690/board.h index f94097ca9..87b9c4e88 100644 --- a/hw/bsp/max32690/boards/apard32690/board.h +++ b/hw/bsp/max32690/boards/apard32690/board.h @@ -24,6 +24,11 @@ * This file is part of the TinyUSB stack. */ +/* metadata: + name: APARD32690-SL + url: https://www.analog.com/en/resources/evaluation-hardware-and-software/evaluation-boards-kits/ad-apard32690-sl.html +*/ + #ifndef BOARD_H_ #define BOARD_H_ diff --git a/hw/bsp/max32690/boards/max32690evkit/board.h b/hw/bsp/max32690/boards/max32690evkit/board.h index 05d60f220..aa8dbb1de 100644 --- a/hw/bsp/max32690/boards/max32690evkit/board.h +++ b/hw/bsp/max32690/boards/max32690evkit/board.h @@ -24,6 +24,11 @@ * This file is part of the TinyUSB stack. */ +/* metadata: + name: MAX32690 EVKIT + url: https://www.analog.com/en/resources/evaluation-hardware-and-software/evaluation-boards-kits/max32690evkit.html +*/ + #ifndef BOARD_H_ #define BOARD_H_ diff --git a/hw/bsp/max32690/family.c b/hw/bsp/max32690/family.c index 2418168d4..7ba5fbef3 100644 --- a/hw/bsp/max32690/family.c +++ b/hw/bsp/max32690/family.c @@ -24,6 +24,10 @@ * This file is part of the TinyUSB stack. */ +/* metadata: + manufacturer: Analog Devices +*/ + #ifdef __GNUC__ #pragma GCC diagnostic push #pragma GCC diagnostic ignored "-Wstrict-prototypes" // _mxc_crit_get_state() diff --git a/hw/bsp/max78002/boards/max78002evkit/board.h b/hw/bsp/max78002/boards/max78002evkit/board.h index f8102c394..85d55d7de 100644 --- a/hw/bsp/max78002/boards/max78002evkit/board.h +++ b/hw/bsp/max78002/boards/max78002evkit/board.h @@ -24,6 +24,11 @@ * This file is part of the TinyUSB stack. */ +/* metadata: + name: MAX78002 EVKIT + url: https://www.analog.com/en/resources/evaluation-hardware-and-software/evaluation-boards-kits/max78002evkit.html +*/ + #ifndef BOARD_H_ #define BOARD_H_ diff --git a/hw/bsp/max78002/family.c b/hw/bsp/max78002/family.c index 8d51f141c..5c23f40f9 100644 --- a/hw/bsp/max78002/family.c +++ b/hw/bsp/max78002/family.c @@ -24,6 +24,10 @@ * This file is part of the TinyUSB stack. */ +/* metadata: + manufacturer: Analog Devices +*/ + #ifdef __GNUC__ #pragma GCC diagnostic push #pragma GCC diagnostic ignored "-Wstrict-prototypes" // _mxc_crit_get_state() diff --git a/hw/bsp/mcx/boards/frdm_mcxa153/board.h b/hw/bsp/mcx/boards/frdm_mcxa153/board.h index e207d89d9..fb1290088 100644 --- a/hw/bsp/mcx/boards/frdm_mcxa153/board.h +++ b/hw/bsp/mcx/boards/frdm_mcxa153/board.h @@ -24,6 +24,11 @@ * This file is part of the TinyUSB stack. */ +/* metadata: + name: Freedom MCXA153 + url: https://www.nxp.com/design/design-center/development-boards-and-designs/FRDM-MCXA153 +*/ + #ifndef BOARD_H_ #define BOARD_H_ diff --git a/hw/bsp/mcx/boards/frdm_mcxn947/board.h b/hw/bsp/mcx/boards/frdm_mcxn947/board.h index acb73363f..a35b6818a 100644 --- a/hw/bsp/mcx/boards/frdm_mcxn947/board.h +++ b/hw/bsp/mcx/boards/frdm_mcxn947/board.h @@ -24,6 +24,11 @@ * This file is part of the TinyUSB stack. */ +/* metadata: + name: Freedom MCXN947 + url: https://www.nxp.com/design/design-center/development-boards-and-designs/FRDM-MCXN947 +*/ + #ifndef BOARD_H_ #define BOARD_H_ diff --git a/hw/bsp/mcx/boards/mcxn947brk/board.h b/hw/bsp/mcx/boards/mcxn947brk/board.h index eae98bfa7..eef281787 100644 --- a/hw/bsp/mcx/boards/mcxn947brk/board.h +++ b/hw/bsp/mcx/boards/mcxn947brk/board.h @@ -24,6 +24,11 @@ * This file is part of the TinyUSB stack. */ +/* metadata: + name: MCXN947 Breakout + url: n/a +*/ + #ifndef BOARD_H_ #define BOARD_H_ diff --git a/hw/bsp/mcx/family.c b/hw/bsp/mcx/family.c index ce54097fe..2b9c60beb 100644 --- a/hw/bsp/mcx/family.c +++ b/hw/bsp/mcx/family.c @@ -24,6 +24,10 @@ * This file is part of the TinyUSB stack. */ +/* metadata: + manufacturer: NXP +*/ + #include "bsp/board_api.h" #include "fsl_device_registers.h" #include "fsl_gpio.h" diff --git a/hw/bsp/mm32/boards/mm32f327x_mb39/board.h b/hw/bsp/mm32/boards/mm32f327x_mb39/board.h index 3ac048cf1..ee0800030 100644 --- a/hw/bsp/mm32/boards/mm32f327x_mb39/board.h +++ b/hw/bsp/mm32/boards/mm32f327x_mb39/board.h @@ -1,3 +1,8 @@ +/* metadata: + name: MM32F3273G9P MB-039 + url: https://www.mindmotion.com.cn/support/development_tools/evaluation_boards/evboard/mm32f3273g9p/ +*/ + #ifndef BOARD_H #define BOARD_H diff --git a/hw/bsp/mm32/boards/mm32f327x_pitaya_lite/board.h b/hw/bsp/mm32/boards/mm32f327x_pitaya_lite/board.h index 2b3f54a60..522d494a8 100644 --- a/hw/bsp/mm32/boards/mm32f327x_pitaya_lite/board.h +++ b/hw/bsp/mm32/boards/mm32f327x_pitaya_lite/board.h @@ -1,3 +1,8 @@ +/* metadata: + name: DshanMCU Pitaya Lite with MM32F3273G8P + url: https://gitee.com/weidongshan/DshanMCU-Pitaya-c +*/ + #ifndef BOARD_H #define BOARD_H diff --git a/hw/bsp/mm32/family.c b/hw/bsp/mm32/family.c index f0fd6d334..979efb6ca 100644 --- a/hw/bsp/mm32/family.c +++ b/hw/bsp/mm32/family.c @@ -24,6 +24,10 @@ * This file is part of the TinyUSB stack. */ +/* metadata: + manufacturer: MindMotion +*/ + #include "hal_conf.h" #include "mm32_device.h" diff --git a/hw/bsp/msp430/boards/msp_exp430f5529lp/board.h b/hw/bsp/msp430/boards/msp_exp430f5529lp/board.h index ccfe321c2..8fbe5cc49 100644 --- a/hw/bsp/msp430/boards/msp_exp430f5529lp/board.h +++ b/hw/bsp/msp430/boards/msp_exp430f5529lp/board.h @@ -24,6 +24,11 @@ * This file is part of the TinyUSB stack. */ +/* metadata: + name: MSP430F5529 LaunchPad + url: https://www.ti.com/tool/MSP-EXP430F5529LP +*/ + #ifndef BOARD_H_ #define BOARD_H_ diff --git a/hw/bsp/msp430/family.c b/hw/bsp/msp430/family.c index 5bb3d3866..a45bd5f93 100644 --- a/hw/bsp/msp430/family.c +++ b/hw/bsp/msp430/family.c @@ -24,6 +24,10 @@ * This file is part of the TinyUSB stack. */ +/* metadata: + manufacturer: Texas Instruments +*/ + #include "bsp/board_api.h" #include "board.h" #include "msp430.h" diff --git a/hw/bsp/msp432e4/boards/msp_exp432e401y/board.h b/hw/bsp/msp432e4/boards/msp_exp432e401y/board.h index 3130d663b..6206bb247 100644 --- a/hw/bsp/msp432e4/boards/msp_exp432e401y/board.h +++ b/hw/bsp/msp432e4/boards/msp_exp432e401y/board.h @@ -24,6 +24,11 @@ * This file is part of the TinyUSB stack. */ +/* metadata: + name: MSP432E401Y LaunchPad + url: https://www.ti.com/tool/MSP-EXP432E401Y +*/ + #ifndef BOARD_H_ #define BOARD_H_ diff --git a/hw/bsp/msp432e4/family.c b/hw/bsp/msp432e4/family.c index d5ef7f930..9a3b48b66 100644 --- a/hw/bsp/msp432e4/family.c +++ b/hw/bsp/msp432e4/family.c @@ -24,6 +24,10 @@ * This file is part of the TinyUSB stack. */ +/* metadata: + manufacturer: Texas Instruments +*/ + #include "bsp/board_api.h" #include "board.h" #include "msp.h" diff --git a/hw/bsp/nrf/boards/adafruit_clue/board.h b/hw/bsp/nrf/boards/adafruit_clue/board.h index 8d6df786e..a5d90f608 100644 --- a/hw/bsp/nrf/boards/adafruit_clue/board.h +++ b/hw/bsp/nrf/boards/adafruit_clue/board.h @@ -24,6 +24,11 @@ * This file is part of the TinyUSB stack. */ +/* metadata: + name: Adafruit CLUE + url: https://www.adafruit.com/product/4500 +*/ + #ifndef BOARD_H_ #define BOARD_H_ diff --git a/hw/bsp/nrf/boards/arduino_nano33_ble/board.h b/hw/bsp/nrf/boards/arduino_nano33_ble/board.h index 00fa8d8ea..6e6a079ab 100644 --- a/hw/bsp/nrf/boards/arduino_nano33_ble/board.h +++ b/hw/bsp/nrf/boards/arduino_nano33_ble/board.h @@ -24,6 +24,11 @@ * This file is part of the TinyUSB stack. */ +/* metadata: + name: Arduino Nano 33 BLE + url: https://store.arduino.cc/arduino-nano-33-ble +*/ + #ifndef BOARD_H_ #define BOARD_H_ diff --git a/hw/bsp/nrf/boards/circuitplayground_bluefruit/board.h b/hw/bsp/nrf/boards/circuitplayground_bluefruit/board.h index 3dd354efa..4cdac5f9f 100644 --- a/hw/bsp/nrf/boards/circuitplayground_bluefruit/board.h +++ b/hw/bsp/nrf/boards/circuitplayground_bluefruit/board.h @@ -24,6 +24,11 @@ * This file is part of the TinyUSB stack. */ +/* metadata: + name: Adafruit Circuit Playground Bluefruit + url: https://www.adafruit.com/product/4333 +*/ + #ifndef BOARD_H_ #define BOARD_H_ diff --git a/hw/bsp/nrf/boards/feather_nrf52840_express/board.h b/hw/bsp/nrf/boards/feather_nrf52840_express/board.h index 3d59516d8..bfbb98677 100644 --- a/hw/bsp/nrf/boards/feather_nrf52840_express/board.h +++ b/hw/bsp/nrf/boards/feather_nrf52840_express/board.h @@ -24,6 +24,11 @@ * This file is part of the TinyUSB stack. */ +/* metadata: + name: Adafruit Feather nRF52840 Express + url: https://www.adafruit.com/product/4062 +*/ + #ifndef BOARD_H_ #define BOARD_H_ diff --git a/hw/bsp/nrf/boards/feather_nrf52840_sense/board.h b/hw/bsp/nrf/boards/feather_nrf52840_sense/board.h index 605deea24..288a1b52e 100644 --- a/hw/bsp/nrf/boards/feather_nrf52840_sense/board.h +++ b/hw/bsp/nrf/boards/feather_nrf52840_sense/board.h @@ -24,6 +24,11 @@ * This file is part of the TinyUSB stack. */ +/* metadata: + name: Adafruit Feather nRF52840 Sense + url: https://www.adafruit.com/product/4516 +*/ + #ifndef BOARD_H_ #define BOARD_H_ diff --git a/hw/bsp/nrf/boards/itsybitsy_nrf52840/board.h b/hw/bsp/nrf/boards/itsybitsy_nrf52840/board.h index 33c370f53..5f065eec0 100644 --- a/hw/bsp/nrf/boards/itsybitsy_nrf52840/board.h +++ b/hw/bsp/nrf/boards/itsybitsy_nrf52840/board.h @@ -24,6 +24,11 @@ * This file is part of the TinyUSB stack. */ +/* metadata: + name: Adafruit ItsyBitsy nRF52840 Express + url: https://www.adafruit.com/product/4481 +*/ + #ifndef BOARD_H_ #define BOARD_H_ diff --git a/hw/bsp/nrf/boards/pca10056/board.h b/hw/bsp/nrf/boards/pca10056/board.h index 24d3faa65..ec632e769 100644 --- a/hw/bsp/nrf/boards/pca10056/board.h +++ b/hw/bsp/nrf/boards/pca10056/board.h @@ -24,6 +24,11 @@ * This file is part of the TinyUSB stack. */ +/* metadata: + name: Nordic nRF52840DK + url: https://www.nordicsemi.com/Software-and-Tools/Development-Kits/nRF52840-DK +*/ + #ifndef BOARD_H_ #define BOARD_H_ diff --git a/hw/bsp/nrf/boards/pca10059/board.h b/hw/bsp/nrf/boards/pca10059/board.h index ea3f4030d..3b95481ad 100644 --- a/hw/bsp/nrf/boards/pca10059/board.h +++ b/hw/bsp/nrf/boards/pca10059/board.h @@ -24,6 +24,11 @@ * This file is part of the TinyUSB stack. */ +/* metadata: + name: Nordic nRF52840 Dongle + url: https://www.nordicsemi.com/Software-and-Tools/Development-Kits/nRF52840-Dongle +*/ + #ifndef BOARD_H_ #define BOARD_H_ diff --git a/hw/bsp/nrf/boards/pca10095/board.h b/hw/bsp/nrf/boards/pca10095/board.h index 846c2ee5b..1c7981049 100644 --- a/hw/bsp/nrf/boards/pca10095/board.h +++ b/hw/bsp/nrf/boards/pca10095/board.h @@ -24,6 +24,11 @@ * This file is part of the TinyUSB stack. */ +/* metadata: + name: Nordic nRF5340 DK + url: https://www.nordicsemi.com/Software-and-Tools/Development-Kits/nRF5340-DK +*/ + #ifndef BOARD_H_ #define BOARD_H_ diff --git a/hw/bsp/nrf/boards/pca10100/board.h b/hw/bsp/nrf/boards/pca10100/board.h index 2b2579732..8aca6dce9 100644 --- a/hw/bsp/nrf/boards/pca10100/board.h +++ b/hw/bsp/nrf/boards/pca10100/board.h @@ -24,6 +24,11 @@ * This file is part of the TinyUSB stack. */ +/* metadata: + name: Nordic nRF52833 DK + url: https://www.nordicsemi.com/Software-and-Tools/Development-Kits/nRF52833-DK +*/ + #ifndef BOARD_H_ #define BOARD_H_ diff --git a/hw/bsp/nrf/family.c b/hw/bsp/nrf/family.c index 885910f9a..f3132eeb1 100644 --- a/hw/bsp/nrf/family.c +++ b/hw/bsp/nrf/family.c @@ -24,6 +24,10 @@ * This file is part of the TinyUSB stack. */ +/* metadata: + manufacturer: Nordic Semiconductor +*/ + #include "bsp/board_api.h" #include "board.h" diff --git a/hw/bsp/pic32mz/boards/olimex_emz64/board.h b/hw/bsp/pic32mz/boards/olimex_emz64/board.h new file mode 100644 index 000000000..7f42e024f --- /dev/null +++ b/hw/bsp/pic32mz/boards/olimex_emz64/board.h @@ -0,0 +1,43 @@ +/* +* The MIT License (MIT) + * + * Copyright (c) 2020, Ha Thach (tinyusb.org) + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + * This file is part of the TinyUSB stack. + */ + +/* metadata: + name: Olimex PIC32-EMZ64 + url: https://www.olimex.com/Products/PIC/Development/PIC32-EMZ64/open-source-hardware +*/ + +#ifndef BOARD_H_ +#define BOARD_H_ + +#ifdef __cplusplus + extern "C" { +#endif + +#ifdef __cplusplus + } +#endif + +#endif /* BOARD_H_ */ diff --git a/hw/bsp/pic32mz/boards/olimex_hmz144/board.h b/hw/bsp/pic32mz/boards/olimex_hmz144/board.h new file mode 100644 index 000000000..c9c07bf77 --- /dev/null +++ b/hw/bsp/pic32mz/boards/olimex_hmz144/board.h @@ -0,0 +1,43 @@ +/* +* The MIT License (MIT) + * + * Copyright (c) 2020, Ha Thach (tinyusb.org) + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + * This file is part of the TinyUSB stack. + */ + +/* metadata: + name: Olimex PIC32-HMZ144 + url: https://www.olimex.com/Products/PIC/Development/PIC32-HMZ144/open-source-hardware +*/ + +#ifndef BOARD_H_ +#define BOARD_H_ + +#ifdef __cplusplus + extern "C" { +#endif + +#ifdef __cplusplus + } +#endif + +#endif /* BOARD_H_ */ diff --git a/hw/bsp/pic32mz/family.c b/hw/bsp/pic32mz/family.c index 895e23899..da97f67a9 100644 --- a/hw/bsp/pic32mz/family.c +++ b/hw/bsp/pic32mz/family.c @@ -24,6 +24,10 @@ * This file is part of the TinyUSB stack. */ +/* metadata: + manufacturer: Microchip +*/ + #include #include #include diff --git a/hw/bsp/ra/boards/portenta_c33/board.h b/hw/bsp/ra/boards/portenta_c33/board.h index ba663d040..7853c2dbd 100644 --- a/hw/bsp/ra/boards/portenta_c33/board.h +++ b/hw/bsp/ra/boards/portenta_c33/board.h @@ -24,6 +24,11 @@ * This file is part of the TinyUSB stack. */ +/* metadata: + name: Arduino Portenta C33 + url: https://www.arduino.cc/pro/hardware-product-portenta-c33/ +*/ + #ifndef _BOARD_H_ #define _BOARD_H_ diff --git a/hw/bsp/ra/boards/ra2a1_ek/board.h b/hw/bsp/ra/boards/ra2a1_ek/board.h index ba663d040..d925fc551 100644 --- a/hw/bsp/ra/boards/ra2a1_ek/board.h +++ b/hw/bsp/ra/boards/ra2a1_ek/board.h @@ -24,6 +24,11 @@ * This file is part of the TinyUSB stack. */ +/* metadata: + name: RA2A1 EK + url: https://www.renesas.com/en/products/microcontrollers-microprocessors/ra-cortex-m-mcus/ek-ra2a1-evaluation-kit-ra2a1-mcu-group +*/ + #ifndef _BOARD_H_ #define _BOARD_H_ diff --git a/hw/bsp/ra/boards/ra4m1_ek/board.h b/hw/bsp/ra/boards/ra4m1_ek/board.h index ba663d040..e146261be 100644 --- a/hw/bsp/ra/boards/ra4m1_ek/board.h +++ b/hw/bsp/ra/boards/ra4m1_ek/board.h @@ -24,6 +24,11 @@ * This file is part of the TinyUSB stack. */ +/* metadata: + name: RA4M1 EK + url: https://www.renesas.com/en/products/microcontrollers-microprocessors/ra-cortex-m-mcus/ek-ra4m1-evaluation-kit-ra4m1-mcu-group +*/ + #ifndef _BOARD_H_ #define _BOARD_H_ diff --git a/hw/bsp/ra/boards/ra4m3_ek/board.h b/hw/bsp/ra/boards/ra4m3_ek/board.h index 9dd2545a0..8b277f6f0 100644 --- a/hw/bsp/ra/boards/ra4m3_ek/board.h +++ b/hw/bsp/ra/boards/ra4m3_ek/board.h @@ -24,6 +24,11 @@ * This file is part of the TinyUSB stack. */ +/* metadata: + name: RA4M3 EK + url: https://www.renesas.com/en/products/microcontrollers-microprocessors/ra-cortex-m-mcus/ek-ra4m3-evaluation-kit-ra4m3-mcu-group +*/ + #ifndef _BOARD_H_ #define _BOARD_H_ diff --git a/hw/bsp/ra/boards/ra6m1_ek/board.h b/hw/bsp/ra/boards/ra6m1_ek/board.h index ba663d040..2024a0335 100644 --- a/hw/bsp/ra/boards/ra6m1_ek/board.h +++ b/hw/bsp/ra/boards/ra6m1_ek/board.h @@ -24,6 +24,11 @@ * This file is part of the TinyUSB stack. */ +/* metadata: + name: RA6M1 EK + url: https://www.renesas.com/en/products/microcontrollers-microprocessors/ra-cortex-m-mcus/ek-ra6m1-evaluation-kit-ra6m1-mcu-group +*/ + #ifndef _BOARD_H_ #define _BOARD_H_ diff --git a/hw/bsp/ra/boards/ra6m5_ek/board.h b/hw/bsp/ra/boards/ra6m5_ek/board.h index 33dda99b4..32ede3a97 100644 --- a/hw/bsp/ra/boards/ra6m5_ek/board.h +++ b/hw/bsp/ra/boards/ra6m5_ek/board.h @@ -24,6 +24,11 @@ * This file is part of the TinyUSB stack. */ +/* metadata: + name: RA6M5 EK + url: https://www.renesas.com/en/products/microcontrollers-microprocessors/ra-cortex-m-mcus/ek-ra6m5-evaluation-kit-ra6m5-mcu-group +*/ + #ifndef _BOARD_H_ #define _BOARD_H_ diff --git a/hw/bsp/ra/boards/ra8m1_ek/board.h b/hw/bsp/ra/boards/ra8m1_ek/board.h index 33dda99b4..54672452f 100644 --- a/hw/bsp/ra/boards/ra8m1_ek/board.h +++ b/hw/bsp/ra/boards/ra8m1_ek/board.h @@ -24,6 +24,11 @@ * This file is part of the TinyUSB stack. */ +/* metadata: + name: RA8M1 EK + url: https://www.renesas.com/en/products/microcontrollers-microprocessors/ra-cortex-m-mcus/ek-ra8m1-evaluation-kit-ra8m1-mcu-group +*/ + #ifndef _BOARD_H_ #define _BOARD_H_ diff --git a/hw/bsp/ra/boards/uno_r4/board.h b/hw/bsp/ra/boards/uno_r4/board.h index 2c262bb9b..4e7ebb5ce 100644 --- a/hw/bsp/ra/boards/uno_r4/board.h +++ b/hw/bsp/ra/boards/uno_r4/board.h @@ -24,6 +24,11 @@ * This file is part of the TinyUSB stack. */ +/* metadata: + name: Arduino UNO R4 + url: https://store-usa.arduino.cc/pages/uno-r4 +*/ + #ifndef _BOARD_H_ #define _BOARD_H_ diff --git a/hw/bsp/ra/family.c b/hw/bsp/ra/family.c index 523b6ff55..0fd24e493 100644 --- a/hw/bsp/ra/family.c +++ b/hw/bsp/ra/family.c @@ -24,6 +24,10 @@ * This file is part of the TinyUSB stack. */ +/* metadata: + manufacturer: Renesas +*/ + #include #ifdef __GNUC__ diff --git a/hw/bsp/rp2040/board.h b/hw/bsp/rp2040/board.h index 733e93797..5dbb1dd37 100644 --- a/hw/bsp/rp2040/board.h +++ b/hw/bsp/rp2040/board.h @@ -24,6 +24,11 @@ * This file is part of the TinyUSB stack. */ +/* metadata: + name: Pico + url: https://www.raspberrypi.org/products/raspberry-pi-pico/ +*/ + #ifndef BOARD_H_ #define BOARD_H_ diff --git a/hw/bsp/rp2040/family.c b/hw/bsp/rp2040/family.c index 452a5568f..24aa0b616 100644 --- a/hw/bsp/rp2040/family.c +++ b/hw/bsp/rp2040/family.c @@ -25,6 +25,10 @@ * This file is part of the TinyUSB stack. */ +/* metadata: + manufacturer: Raspberry Pi +*/ + #include "pico/stdlib.h" #include "pico/binary_info.h" #include "pico/unique_id.h" diff --git a/hw/bsp/rx/boards/gr_citrus/board.h b/hw/bsp/rx/boards/gr_citrus/board.h new file mode 100644 index 000000000..617d309c3 --- /dev/null +++ b/hw/bsp/rx/boards/gr_citrus/board.h @@ -0,0 +1,43 @@ +/* +* The MIT License (MIT) + * + * Copyright (c) 2020, Ha Thach (tinyusb.org) + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + * This file is part of the TinyUSB stack. + */ + +/* metadata: + name: GR Citrus + url: https://www.renesas.com/en/products/gadget-renesas/boards/gr-citrus +*/ + +#ifndef BOARD_H_ +#define BOARD_H_ + +#ifdef __cplusplus + extern "C" { +#endif + +#ifdef __cplusplus + } +#endif + +#endif /* BOARD_H_ */ diff --git a/hw/bsp/rx/boards/rx65n_target/board.h b/hw/bsp/rx/boards/rx65n_target/board.h new file mode 100644 index 000000000..8c8e7b95f --- /dev/null +++ b/hw/bsp/rx/boards/rx65n_target/board.h @@ -0,0 +1,43 @@ +/* +* The MIT License (MIT) + * + * Copyright (c) 2020, Ha Thach (tinyusb.org) + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + * This file is part of the TinyUSB stack. + */ + +/* metadata: + name: RX65N Target Board + url: https://www.renesas.com/en/products/microcontrollers-microprocessors/rx-32-bit-performance-efficiency-mcus/rtk5rx65n0c00000br-target-board-rx65n +*/ + +#ifndef BOARD_H_ +#define BOARD_H_ + +#ifdef __cplusplus + extern "C" { +#endif + +#ifdef __cplusplus + } +#endif + +#endif /* BOARD_H_ */ diff --git a/hw/bsp/samd11/boards/cynthion_d11/board.h b/hw/bsp/samd11/boards/cynthion_d11/board.h index b13c8eeea..8916e9b83 100644 --- a/hw/bsp/samd11/boards/cynthion_d11/board.h +++ b/hw/bsp/samd11/boards/cynthion_d11/board.h @@ -24,6 +24,11 @@ * This file is part of the TinyUSB stack. */ +/* metadata: + name: Great Scott Gadgets Cynthion + url: https://greatscottgadgets.com/cynthion/ +*/ + #ifndef BOARD_H_ #define BOARD_H_ diff --git a/hw/bsp/samd11/boards/samd11_xplained/board.h b/hw/bsp/samd11/boards/samd11_xplained/board.h index 2bbec4958..13045ac1d 100644 --- a/hw/bsp/samd11/boards/samd11_xplained/board.h +++ b/hw/bsp/samd11/boards/samd11_xplained/board.h @@ -24,6 +24,11 @@ * This file is part of the TinyUSB stack. */ +/* metadata: + name: SAMD11 Xplained Pro + url: https://www.microchip.com/en-us/development-tool/ATSAMD11-XPRO +*/ + #ifndef BOARD_H_ #define BOARD_H_ diff --git a/hw/bsp/samd11/family.c b/hw/bsp/samd11/family.c index a6588805a..79ca9de02 100644 --- a/hw/bsp/samd11/family.c +++ b/hw/bsp/samd11/family.c @@ -24,6 +24,10 @@ * This file is part of the TinyUSB stack. */ +/* metadata: + manufacturer: Microchip +*/ + #include "sam.h" // Suppress warning caused by mcu driver diff --git a/hw/bsp/samd21/boards/atsamd21_xpro/board.h b/hw/bsp/samd21/boards/atsamd21_xpro/board.h index 315e40c78..6d2e40c56 100644 --- a/hw/bsp/samd21/boards/atsamd21_xpro/board.h +++ b/hw/bsp/samd21/boards/atsamd21_xpro/board.h @@ -24,6 +24,11 @@ * This file is part of the TinyUSB stack. */ +/* metadata: + name: SAMD21 Xplained Pro + url: https://www.microchip.com/DevelopmentTools/ProductDetails/ATSAMD21-XPRO +*/ + #ifndef BOARD_H_ #define BOARD_H_ diff --git a/hw/bsp/samd21/boards/circuitplayground_express/board.h b/hw/bsp/samd21/boards/circuitplayground_express/board.h index 0037db00d..6a4ec32a9 100644 --- a/hw/bsp/samd21/boards/circuitplayground_express/board.h +++ b/hw/bsp/samd21/boards/circuitplayground_express/board.h @@ -24,6 +24,11 @@ * This file is part of the TinyUSB stack. */ +/* metadata: + name: Adafruit Circuit Playground Express + url: https://www.adafruit.com/product/3333 +*/ + #ifndef BOARD_H_ #define BOARD_H_ diff --git a/hw/bsp/samd21/boards/curiosity_nano/board.h b/hw/bsp/samd21/boards/curiosity_nano/board.h index 1a4a833a3..78d701ec9 100644 --- a/hw/bsp/samd21/boards/curiosity_nano/board.h +++ b/hw/bsp/samd21/boards/curiosity_nano/board.h @@ -24,6 +24,11 @@ * This file is part of the TinyUSB stack. */ +/* metadata: + name: SAMD21 Curiosty Nano + url: https://www.microchip.com/en-us/development-tool/dm320119 +*/ + #ifndef BOARD_H_ #define BOARD_H_ diff --git a/hw/bsp/samd21/boards/cynthion_d21/board.h b/hw/bsp/samd21/boards/cynthion_d21/board.h index 776063636..6a2b8c5c6 100644 --- a/hw/bsp/samd21/boards/cynthion_d21/board.h +++ b/hw/bsp/samd21/boards/cynthion_d21/board.h @@ -24,6 +24,11 @@ * This file is part of the TinyUSB stack. */ +/* metadata: + name: Great Scott Gadgets Cynthion + url: https://greatscottgadgets.com/cynthion/ +*/ + #ifndef BOARD_H_ #define BOARD_H_ diff --git a/hw/bsp/samd21/boards/feather_m0_express/board.h b/hw/bsp/samd21/boards/feather_m0_express/board.h index 56ae3230d..a7f9122ee 100644 --- a/hw/bsp/samd21/boards/feather_m0_express/board.h +++ b/hw/bsp/samd21/boards/feather_m0_express/board.h @@ -24,6 +24,11 @@ * This file is part of the TinyUSB stack. */ +/* metadata: + name: Adafruit Feather M0 Express + url: https://www.adafruit.com/product/3403 +*/ + #ifndef BOARD_H_ #define BOARD_H_ diff --git a/hw/bsp/samd21/boards/itsybitsy_m0/board.h b/hw/bsp/samd21/boards/itsybitsy_m0/board.h index 6ee814da5..15a0afb15 100644 --- a/hw/bsp/samd21/boards/itsybitsy_m0/board.h +++ b/hw/bsp/samd21/boards/itsybitsy_m0/board.h @@ -24,6 +24,11 @@ * This file is part of the TinyUSB stack. */ +/* metadata: + name: Adafruit ItsyBitsy M0 + url: https://www.adafruit.com/product/3727 +*/ + #ifndef BOARD_H_ #define BOARD_H_ diff --git a/hw/bsp/samd21/boards/metro_m0_express/board.h b/hw/bsp/samd21/boards/metro_m0_express/board.h index 6dd53e901..405c92b02 100644 --- a/hw/bsp/samd21/boards/metro_m0_express/board.h +++ b/hw/bsp/samd21/boards/metro_m0_express/board.h @@ -24,6 +24,11 @@ * This file is part of the TinyUSB stack. */ +/* metadata: + name: Adafruit Metro M0 Express + url: https://www.adafruit.com/product/3505 +*/ + #ifndef BOARD_H_ #define BOARD_H_ diff --git a/hw/bsp/samd21/boards/qtpy/board.h b/hw/bsp/samd21/boards/qtpy/board.h index 9ba39e966..29a9f727f 100644 --- a/hw/bsp/samd21/boards/qtpy/board.h +++ b/hw/bsp/samd21/boards/qtpy/board.h @@ -24,6 +24,11 @@ * This file is part of the TinyUSB stack. */ +/* metadata: + name: Adafruit QT Py + url: https://www.adafruit.com/product/4600 +*/ + #ifndef BOARD_H_ #define BOARD_H_ diff --git a/hw/bsp/samd21/boards/seeeduino_xiao/board.h b/hw/bsp/samd21/boards/seeeduino_xiao/board.h index 1bd63d6d9..0a6d1fc7d 100644 --- a/hw/bsp/samd21/boards/seeeduino_xiao/board.h +++ b/hw/bsp/samd21/boards/seeeduino_xiao/board.h @@ -24,6 +24,11 @@ * This file is part of the TinyUSB stack. */ +/* metadata: + name: Seeeduino XIAO + url: https://wiki.seeedstudio.com/Seeeduino-XIAO/ +*/ + #ifndef BOARD_H_ #define BOARD_H_ diff --git a/hw/bsp/samd21/boards/sparkfun_samd21_mini_usb/board.h b/hw/bsp/samd21/boards/sparkfun_samd21_mini_usb/board.h index 60a86d743..85be34008 100644 --- a/hw/bsp/samd21/boards/sparkfun_samd21_mini_usb/board.h +++ b/hw/bsp/samd21/boards/sparkfun_samd21_mini_usb/board.h @@ -24,6 +24,11 @@ * This file is part of the TinyUSB stack. */ +/* metadata: + name: SparkFun SAMD21 Mini + url: https://www.sparkfun.com/products/13664 +*/ + #ifndef BOARD_H_ #define BOARD_H_ diff --git a/hw/bsp/samd21/boards/trinket_m0/board.h b/hw/bsp/samd21/boards/trinket_m0/board.h index c94a3abb6..22e7cb77f 100644 --- a/hw/bsp/samd21/boards/trinket_m0/board.h +++ b/hw/bsp/samd21/boards/trinket_m0/board.h @@ -23,6 +23,11 @@ * */ +/* metadata: + name: Adafruit Trinket M0 + url: https://www.adafruit.com/product/3500 +*/ + #pragma once // LED diff --git a/hw/bsp/samd21/family.c b/hw/bsp/samd21/family.c index 7ca20c458..c360a4a5a 100644 --- a/hw/bsp/samd21/family.c +++ b/hw/bsp/samd21/family.c @@ -24,6 +24,10 @@ * This file is part of the TinyUSB stack. */ +/* metadata: + manufacturer: Microchip +*/ + #include "sam.h" #include "bsp/board_api.h" #include "board.h" diff --git a/hw/bsp/samd5x_e5x/boards/d5035_01/board.h b/hw/bsp/samd5x_e5x/boards/d5035_01/board.h index 2cf59f5d1..4eb4a4ebe 100644 --- a/hw/bsp/samd5x_e5x/boards/d5035_01/board.h +++ b/hw/bsp/samd5x_e5x/boards/d5035_01/board.h @@ -24,6 +24,11 @@ * This file is part of the TinyUSB stack. */ +/* metadata: + name: D5035-01 + url: https://github.com/RudolphRiedel/USB_CAN-FD +*/ + #ifndef BOARD_H_ #define BOARD_H_ diff --git a/hw/bsp/samd5x_e5x/boards/feather_m4_express/board.h b/hw/bsp/samd5x_e5x/boards/feather_m4_express/board.h index 83de04266..edb965c9d 100644 --- a/hw/bsp/samd5x_e5x/boards/feather_m4_express/board.h +++ b/hw/bsp/samd5x_e5x/boards/feather_m4_express/board.h @@ -24,6 +24,11 @@ * This file is part of the TinyUSB stack. */ +/* metadata: + name: Adafruit Feather M4 Express + url: https://www.adafruit.com/product/3857 +*/ + #ifndef BOARD_H_ #define BOARD_H_ diff --git a/hw/bsp/samd5x_e5x/boards/itsybitsy_m4/board.h b/hw/bsp/samd5x_e5x/boards/itsybitsy_m4/board.h index 272315771..d41ca4ac3 100644 --- a/hw/bsp/samd5x_e5x/boards/itsybitsy_m4/board.h +++ b/hw/bsp/samd5x_e5x/boards/itsybitsy_m4/board.h @@ -24,6 +24,11 @@ * This file is part of the TinyUSB stack. */ +/* metadata: + name: Adafruit ItsyBitsy M4 + url: https://www.adafruit.com/product/3800 +*/ + #ifndef BOARD_H_ #define BOARD_H_ diff --git a/hw/bsp/samd5x_e5x/boards/metro_m4_express/board.h b/hw/bsp/samd5x_e5x/boards/metro_m4_express/board.h index b3b80db89..b2eaaa54d 100644 --- a/hw/bsp/samd5x_e5x/boards/metro_m4_express/board.h +++ b/hw/bsp/samd5x_e5x/boards/metro_m4_express/board.h @@ -24,6 +24,11 @@ * This file is part of the TinyUSB stack. */ +/* metadata: + name: Adafruit Metro M4 Express + url: https://www.adafruit.com/product/3382 +*/ + #ifndef BOARD_H_ #define BOARD_H_ diff --git a/hw/bsp/samd5x_e5x/boards/pybadge/board.h b/hw/bsp/samd5x_e5x/boards/pybadge/board.h index 4629643fd..a5d447db6 100644 --- a/hw/bsp/samd5x_e5x/boards/pybadge/board.h +++ b/hw/bsp/samd5x_e5x/boards/pybadge/board.h @@ -24,6 +24,11 @@ * This file is part of the TinyUSB stack. */ +/* metadata: + name: Adafruit PyBadge + url: https://www.adafruit.com/product/4200 +*/ + #ifndef BOARD_H_ #define BOARD_H_ diff --git a/hw/bsp/samd5x_e5x/boards/pyportal/board.h b/hw/bsp/samd5x_e5x/boards/pyportal/board.h index ff04c900b..e635e1375 100644 --- a/hw/bsp/samd5x_e5x/boards/pyportal/board.h +++ b/hw/bsp/samd5x_e5x/boards/pyportal/board.h @@ -24,6 +24,11 @@ * This file is part of the TinyUSB stack. */ +/* metadata: + name: Adafruit PyPortal + url: https://www.adafruit.com/product/4116 +*/ + #ifndef BOARD_H_ #define BOARD_H_ diff --git a/hw/bsp/samd5x_e5x/boards/same54_xplained/board.h b/hw/bsp/samd5x_e5x/boards/same54_xplained/board.h index faaa52b8e..6c252f9d0 100644 --- a/hw/bsp/samd5x_e5x/boards/same54_xplained/board.h +++ b/hw/bsp/samd5x_e5x/boards/same54_xplained/board.h @@ -24,6 +24,11 @@ * This file is part of the TinyUSB stack. */ +/* metadata: + name: SAME54 Xplained Pro + url: https://www.microchip.com/DevelopmentTools/ProductDetails/ATSAME54-XPRO +*/ + #ifndef BOARD_H_ #define BOARD_H_ diff --git a/hw/bsp/samd5x_e5x/family.c b/hw/bsp/samd5x_e5x/family.c index abaee353b..8ceddb1be 100644 --- a/hw/bsp/samd5x_e5x/family.c +++ b/hw/bsp/samd5x_e5x/family.c @@ -24,6 +24,10 @@ * This file is part of the TinyUSB stack. */ +/* metadata: + manufacturer: Microchip +*/ + #include "sam.h" #include "bsp/board_api.h" #include "board.h" diff --git a/hw/bsp/samg/boards/samg55_xplained/board.h b/hw/bsp/samg/boards/samg55_xplained/board.h index c94cda198..53c557ef0 100644 --- a/hw/bsp/samg/boards/samg55_xplained/board.h +++ b/hw/bsp/samg/boards/samg55_xplained/board.h @@ -1,3 +1,8 @@ +/* metadata: + name: SAMG55 Xplained Pro + url: https://www.microchip.com/DevelopmentTools/ProductDetails/ATSAMG55-XPRO +*/ + #ifndef BOARD_H #define BOARD_H diff --git a/hw/bsp/samg/family.c b/hw/bsp/samg/family.c index 63db5739d..8db429e79 100644 --- a/hw/bsp/samg/family.c +++ b/hw/bsp/samg/family.c @@ -23,6 +23,10 @@ * */ +/* metadata: + manufacturer: Microchip +*/ + #include "sam.h" // Suppress warning caused by mcu driver diff --git a/hw/bsp/saml2x/boards/atsaml21_xpro/board.h b/hw/bsp/saml2x/boards/atsaml21_xpro/board.h index 315e40c78..b93b4e591 100644 --- a/hw/bsp/saml2x/boards/atsaml21_xpro/board.h +++ b/hw/bsp/saml2x/boards/atsaml21_xpro/board.h @@ -24,6 +24,11 @@ * This file is part of the TinyUSB stack. */ +/* metadata: + name: SAML21 Xplained Pro + url: https://www.microchip.com/en-us/development-tool/atsaml21-xpro-b +*/ + #ifndef BOARD_H_ #define BOARD_H_ diff --git a/hw/bsp/saml2x/boards/saml22_feather/board.h b/hw/bsp/saml2x/boards/saml22_feather/board.h index 72e9897b6..f8660c3f8 100644 --- a/hw/bsp/saml2x/boards/saml22_feather/board.h +++ b/hw/bsp/saml2x/boards/saml22_feather/board.h @@ -24,6 +24,11 @@ * This file is part of the TinyUSB stack. */ +/* metadata: + name: SAML22 Feather + url: https://github.com/joeycastillo/Feather-Projects/tree/main/SAML22%20Feather +*/ + #ifndef BOARD_H_ #define BOARD_H_ diff --git a/hw/bsp/saml2x/boards/sensorwatch_m0/board.h b/hw/bsp/saml2x/boards/sensorwatch_m0/board.h index 735f6afc8..502c799db 100644 --- a/hw/bsp/saml2x/boards/sensorwatch_m0/board.h +++ b/hw/bsp/saml2x/boards/sensorwatch_m0/board.h @@ -24,6 +24,11 @@ * This file is part of the TinyUSB stack. */ +/* metadata: + name: SensorWatch + url: https://github.com/joeycastillo/Sensor-Watch +*/ + #ifndef BOARD_H_ #define BOARD_H_ diff --git a/hw/bsp/saml2x/family.c b/hw/bsp/saml2x/family.c index 11977b036..cdc65baf1 100644 --- a/hw/bsp/saml2x/family.c +++ b/hw/bsp/saml2x/family.c @@ -24,6 +24,10 @@ * This file is part of the TinyUSB stack. */ +/* metadata: + manufacturer: Microchip +*/ + #include "sam.h" // Suppress warning caused by mcu driver diff --git a/hw/bsp/stm32c0/boards/stm32c071nucleo/board.h b/hw/bsp/stm32c0/boards/stm32c071nucleo/board.h index f08762736..c7d809717 100644 --- a/hw/bsp/stm32c0/boards/stm32c071nucleo/board.h +++ b/hw/bsp/stm32c0/boards/stm32c071nucleo/board.h @@ -25,6 +25,11 @@ * This file is part of the TinyUSB stack. */ +/* metadata: + name: STM32C071 Nucleo + url: https://www.st.com/en/evaluation-tools/nucleo-g071rb.html +*/ + #ifndef BOARD_H_ #define BOARD_H_ diff --git a/hw/bsp/stm32c0/family.c b/hw/bsp/stm32c0/family.c index dba6a8af1..ace3f2a71 100644 --- a/hw/bsp/stm32c0/family.c +++ b/hw/bsp/stm32c0/family.c @@ -25,6 +25,10 @@ * This file is part of the TinyUSB stack. */ +/* metadata: + manufacturer: STMicroelectronics +*/ + #include "stm32c0xx_hal.h" #include "bsp/board_api.h" #include "board.h" diff --git a/hw/bsp/stm32f0/boards/stm32f070rbnucleo/board.h b/hw/bsp/stm32f0/boards/stm32f070rbnucleo/board.h index 9af81e63c..82ad309a3 100644 --- a/hw/bsp/stm32f0/boards/stm32f070rbnucleo/board.h +++ b/hw/bsp/stm32f0/boards/stm32f070rbnucleo/board.h @@ -24,6 +24,11 @@ * This file is part of the TinyUSB stack. */ +/* metadata: + name: STM32 F070 Nucleo + url: https://www.st.com/en/evaluation-tools/nucleo-f070rb.html +*/ + #ifndef BOARD_H_ #define BOARD_H_ diff --git a/hw/bsp/stm32f0/boards/stm32f072disco/board.h b/hw/bsp/stm32f0/boards/stm32f072disco/board.h index 1febd01e8..3ca1b3641 100644 --- a/hw/bsp/stm32f0/boards/stm32f072disco/board.h +++ b/hw/bsp/stm32f0/boards/stm32f072disco/board.h @@ -24,6 +24,11 @@ * This file is part of the TinyUSB stack. */ +/* metadata: + name: STM32 F072 Discovery + url: https://www.st.com/en/evaluation-tools/32f072bdiscovery.html +*/ + #ifndef BOARD_H_ #define BOARD_H_ diff --git a/hw/bsp/stm32f0/boards/stm32f072eval/board.h b/hw/bsp/stm32f0/boards/stm32f072eval/board.h index 7dcfa3e85..2828000b9 100644 --- a/hw/bsp/stm32f0/boards/stm32f072eval/board.h +++ b/hw/bsp/stm32f0/boards/stm32f072eval/board.h @@ -24,6 +24,11 @@ * This file is part of the TinyUSB stack. */ +/* metadata: + name: STM32 F072 Eval + url: https://www.st.com/en/evaluation-tools/stm32072b-eval.html +*/ + #ifndef BOARD_H_ #define BOARD_H_ diff --git a/hw/bsp/stm32f0/family.c b/hw/bsp/stm32f0/family.c index 3079a1ed3..ea1373e6c 100644 --- a/hw/bsp/stm32f0/family.c +++ b/hw/bsp/stm32f0/family.c @@ -24,6 +24,10 @@ * This file is part of the TinyUSB stack. */ +/* metadata: + manufacturer: STMicroelectronics +*/ + #include "stm32f0xx_hal.h" #include "bsp/board_api.h" #include "board.h" diff --git a/hw/bsp/stm32f1/boards/stm32f103_bluepill/board.h b/hw/bsp/stm32f1/boards/stm32f103_bluepill/board.h index 2f30a09d4..c8a74337f 100644 --- a/hw/bsp/stm32f1/boards/stm32f103_bluepill/board.h +++ b/hw/bsp/stm32f1/boards/stm32f103_bluepill/board.h @@ -24,6 +24,11 @@ * This file is part of the TinyUSB stack. */ +/* metadata: + name: STM32 F103 Bluepill + url: https://stm32-base.org/boards/STM32F103C8T6-Blue-Pill +*/ + #ifndef BOARD_H_ #define BOARD_H_ diff --git a/hw/bsp/stm32f1/boards/stm32f103_mini_2/board.h b/hw/bsp/stm32f1/boards/stm32f103_mini_2/board.h index c8dba4268..d4824686f 100644 --- a/hw/bsp/stm32f1/boards/stm32f103_mini_2/board.h +++ b/hw/bsp/stm32f1/boards/stm32f103_mini_2/board.h @@ -24,6 +24,11 @@ * This file is part of the TinyUSB stack. */ +/* metadata: + name: STM32 F103 Mini v2 + url: https://stm32-base.org/boards/STM32F103RCT6-STM32-Mini-V2.0 +*/ + #ifndef BOARD_H_ #define BOARD_H_ diff --git a/hw/bsp/stm32f1/boards/stm32f103ze_iar/board.h b/hw/bsp/stm32f1/boards/stm32f103ze_iar/board.h index d31102d32..1253c5a48 100644 --- a/hw/bsp/stm32f1/boards/stm32f103ze_iar/board.h +++ b/hw/bsp/stm32f1/boards/stm32f103ze_iar/board.h @@ -24,6 +24,11 @@ * This file is part of the TinyUSB stack. */ +/* metadata: + name: IAR STM32 F103ze starter kit + url: n/a +*/ + #ifndef BOARD_H_ #define BOARD_H_ diff --git a/hw/bsp/stm32f1/family.c b/hw/bsp/stm32f1/family.c index 600fc28c0..29785397f 100644 --- a/hw/bsp/stm32f1/family.c +++ b/hw/bsp/stm32f1/family.c @@ -24,6 +24,10 @@ * This file is part of the TinyUSB stack. */ +/* metadata: + manufacturer: STMicroelectronics +*/ + #include "stm32f1xx_hal.h" #include "bsp/board_api.h" #include "board.h" diff --git a/hw/bsp/stm32f2/boards/stm32f207nucleo/board.h b/hw/bsp/stm32f2/boards/stm32f207nucleo/board.h index 3301ede27..8d8c52f60 100644 --- a/hw/bsp/stm32f2/boards/stm32f207nucleo/board.h +++ b/hw/bsp/stm32f2/boards/stm32f207nucleo/board.h @@ -1,3 +1,9 @@ + +/* metadata: + name: STM32 F207 Nucleo + url: https://www.st.com/en/evaluation-tools/nucleo-f207zg.html +*/ + #ifndef BOARD_H #define BOARD_H diff --git a/hw/bsp/stm32f2/family.c b/hw/bsp/stm32f2/family.c index 62cca327b..c1333382a 100644 --- a/hw/bsp/stm32f2/family.c +++ b/hw/bsp/stm32f2/family.c @@ -24,6 +24,10 @@ * This file is part of the TinyUSB stack. */ +/* metadata: + manufacturer: STMicroelectronics +*/ + #include "stm32f2xx_hal.h" #include "bsp/board_api.h" #include "board.h" diff --git a/hw/bsp/stm32f3/boards/stm32f303disco/board.h b/hw/bsp/stm32f3/boards/stm32f303disco/board.h index 706149b49..c79dea945 100644 --- a/hw/bsp/stm32f3/boards/stm32f303disco/board.h +++ b/hw/bsp/stm32f3/boards/stm32f303disco/board.h @@ -1,3 +1,9 @@ + +/* metadata: + name: STM32 F303 Discovery + url: https://www.st.com/en/evaluation-tools/stm32f3discovery.html +*/ + #ifndef BOARD_H #define BOARD_H diff --git a/hw/bsp/stm32f3/family.c b/hw/bsp/stm32f3/family.c index f94dd95cf..84612d416 100644 --- a/hw/bsp/stm32f3/family.c +++ b/hw/bsp/stm32f3/family.c @@ -24,6 +24,10 @@ * This file is part of the TinyUSB stack. */ +/* metadata: + manufacturer: STMicroelectronics +*/ + #include "stm32f3xx_hal.h" #include "bsp/board_api.h" #include "board.h" diff --git a/hw/bsp/stm32f4/boards/feather_stm32f405/board.h b/hw/bsp/stm32f4/boards/feather_stm32f405/board.h index 670ce8012..11e976a42 100644 --- a/hw/bsp/stm32f4/boards/feather_stm32f405/board.h +++ b/hw/bsp/stm32f4/boards/feather_stm32f405/board.h @@ -24,6 +24,11 @@ * This file is part of the TinyUSB stack. */ +/* metadata: + name: Adafruit Feather STM32F405 + url: https://www.adafruit.com/product/4382 +*/ + #ifndef BOARD_H_ #define BOARD_H_ diff --git a/hw/bsp/stm32f4/boards/pyboardv11/board.h b/hw/bsp/stm32f4/boards/pyboardv11/board.h index 077313518..9583a924b 100644 --- a/hw/bsp/stm32f4/boards/pyboardv11/board.h +++ b/hw/bsp/stm32f4/boards/pyboardv11/board.h @@ -24,6 +24,11 @@ * This file is part of the TinyUSB stack. */ +/* metadata: + name: Pyboard v1.1 + url: https://www.adafruit.com/product/2390 +*/ + #ifndef BOARD_H_ #define BOARD_H_ diff --git a/hw/bsp/stm32f4/boards/stm32f401blackpill/board.h b/hw/bsp/stm32f4/boards/stm32f401blackpill/board.h index ef40089c9..8a3fe8409 100644 --- a/hw/bsp/stm32f4/boards/stm32f401blackpill/board.h +++ b/hw/bsp/stm32f4/boards/stm32f401blackpill/board.h @@ -24,6 +24,11 @@ * This file is part of the TinyUSB stack. */ +/* metadata: + name: STM32 F401 Blackpill + url: https://stm32-base.org/boards/STM32F401CCU6-WeAct-Black-Pill-V1.2 +*/ + #ifndef BOARD_H_ #define BOARD_H_ diff --git a/hw/bsp/stm32f4/boards/stm32f407blackvet/board.h b/hw/bsp/stm32f4/boards/stm32f407blackvet/board.h index 6879d066b..effbf2be8 100644 --- a/hw/bsp/stm32f4/boards/stm32f407blackvet/board.h +++ b/hw/bsp/stm32f4/boards/stm32f407blackvet/board.h @@ -24,6 +24,11 @@ * This file is part of the TinyUSB stack. */ +/* metadata: + name: STM32 F407 Blackvet + url: https://stm32-base.org/boards/STM32F407VET6-STM32-F4VE-V2.0 +*/ + #ifndef BOARD_H_ #define BOARD_H_ diff --git a/hw/bsp/stm32f4/boards/stm32f407disco/board.h b/hw/bsp/stm32f4/boards/stm32f407disco/board.h index 380f8e391..19a029768 100644 --- a/hw/bsp/stm32f4/boards/stm32f407disco/board.h +++ b/hw/bsp/stm32f4/boards/stm32f407disco/board.h @@ -24,6 +24,11 @@ * This file is part of the TinyUSB stack. */ +/* metadata: + name: STM32 F407 Discovery + url: https://www.st.com/en/evaluation-tools/stm32f4discovery.html +*/ + #ifndef BOARD_H_ #define BOARD_H_ diff --git a/hw/bsp/stm32f4/boards/stm32f411blackpill/board.h b/hw/bsp/stm32f4/boards/stm32f411blackpill/board.h index efa618b72..61e5de70d 100644 --- a/hw/bsp/stm32f4/boards/stm32f411blackpill/board.h +++ b/hw/bsp/stm32f4/boards/stm32f411blackpill/board.h @@ -24,6 +24,11 @@ * This file is part of the TinyUSB stack. */ +/* metadata: + name: STM32 F411 Blackpill + url: https://stm32-base.org/boards/STM32F411CEU6-WeAct-Black-Pill-V2.0 +*/ + #ifndef BOARD_H_ #define BOARD_H_ diff --git a/hw/bsp/stm32f4/boards/stm32f411disco/board.h b/hw/bsp/stm32f4/boards/stm32f411disco/board.h index d4bad8e40..d7b02e79d 100644 --- a/hw/bsp/stm32f4/boards/stm32f411disco/board.h +++ b/hw/bsp/stm32f4/boards/stm32f411disco/board.h @@ -24,6 +24,11 @@ * This file is part of the TinyUSB stack. */ +/* metadata: + name: STM32 F411 Discovery + url: https://www.st.com/en/evaluation-tools/32f411ediscovery.html +*/ + #ifndef BOARD_H_ #define BOARD_H_ diff --git a/hw/bsp/stm32f4/boards/stm32f412disco/board.h b/hw/bsp/stm32f4/boards/stm32f412disco/board.h index 74e664418..d5146ae3c 100644 --- a/hw/bsp/stm32f4/boards/stm32f412disco/board.h +++ b/hw/bsp/stm32f4/boards/stm32f412disco/board.h @@ -24,6 +24,11 @@ * This file is part of the TinyUSB stack. */ +/* metadata: + name: STM32 F412 Discovery + url: https://www.st.com/en/evaluation-tools/32f412gdiscovery.html +*/ + #ifndef BOARD_H_ #define BOARD_H_ diff --git a/hw/bsp/stm32f4/boards/stm32f412nucleo/board.h b/hw/bsp/stm32f4/boards/stm32f412nucleo/board.h index 8900a1e6b..f7026ce61 100644 --- a/hw/bsp/stm32f4/boards/stm32f412nucleo/board.h +++ b/hw/bsp/stm32f4/boards/stm32f412nucleo/board.h @@ -24,6 +24,11 @@ * This file is part of the TinyUSB stack. */ +/* metadata: + name: STM32 F412 Nucleo + url: https://www.st.com/en/evaluation-tools/nucleo-f412zg.html +*/ + #ifndef BOARD_H_ #define BOARD_H_ diff --git a/hw/bsp/stm32f4/boards/stm32f439nucleo/board.h b/hw/bsp/stm32f4/boards/stm32f439nucleo/board.h index aa9de4073..9a348f33f 100644 --- a/hw/bsp/stm32f4/boards/stm32f439nucleo/board.h +++ b/hw/bsp/stm32f4/boards/stm32f439nucleo/board.h @@ -24,6 +24,11 @@ * This file is part of the TinyUSB stack. */ +/* metadata: + name: STM32 F439 Nucleo + url: https://www.st.com/en/evaluation-tools/nucleo-f439zi.html +*/ + #ifndef BOARD_H_ #define BOARD_H_ diff --git a/hw/bsp/stm32f4/family.c b/hw/bsp/stm32f4/family.c index 866a09d6f..3a1507dbf 100644 --- a/hw/bsp/stm32f4/family.c +++ b/hw/bsp/stm32f4/family.c @@ -24,6 +24,10 @@ * This file is part of the TinyUSB stack. */ +/* metadata: + manufacturer: STMicroelectronics +*/ + #include "stm32f4xx_hal.h" #include "bsp/board_api.h" diff --git a/hw/bsp/stm32f7/boards/stlinkv3mini/board.h b/hw/bsp/stm32f7/boards/stlinkv3mini/board.h index 632fd99ed..06adb79ad 100644 --- a/hw/bsp/stm32f7/boards/stlinkv3mini/board.h +++ b/hw/bsp/stm32f7/boards/stlinkv3mini/board.h @@ -24,6 +24,11 @@ * This file is part of the TinyUSB stack. */ +/* metadata: + name: Stlink-v3 mini + url: https://www.st.com/en/development-tools/stlink-v3mini.html +*/ + #ifndef BOARD_H_ #define BOARD_H_ diff --git a/hw/bsp/stm32f7/boards/stm32f723disco/board.h b/hw/bsp/stm32f7/boards/stm32f723disco/board.h index d45ceec5c..35102c1f2 100644 --- a/hw/bsp/stm32f7/boards/stm32f723disco/board.h +++ b/hw/bsp/stm32f7/boards/stm32f723disco/board.h @@ -24,6 +24,11 @@ * This file is part of the TinyUSB stack. */ +/* metadata: + name: STM32 F723 Discovery + url: https://www.st.com/en/evaluation-tools/32f723ediscovery.html +*/ + #ifndef BOARD_H_ #define BOARD_H_ diff --git a/hw/bsp/stm32f7/boards/stm32f746disco/board.h b/hw/bsp/stm32f7/boards/stm32f746disco/board.h index d8e92931e..2964ebada 100644 --- a/hw/bsp/stm32f7/boards/stm32f746disco/board.h +++ b/hw/bsp/stm32f7/boards/stm32f746disco/board.h @@ -24,6 +24,11 @@ * This file is part of the TinyUSB stack. */ +/* metadata: + name: STM32 F746 Discovery + url: https://www.st.com/en/evaluation-tools/32f746gdiscovery.html +*/ + #ifndef BOARD_H_ #define BOARD_H_ diff --git a/hw/bsp/stm32f7/boards/stm32f746nucleo/board.h b/hw/bsp/stm32f7/boards/stm32f746nucleo/board.h index 55e77fe5f..b039f5543 100644 --- a/hw/bsp/stm32f7/boards/stm32f746nucleo/board.h +++ b/hw/bsp/stm32f7/boards/stm32f746nucleo/board.h @@ -24,6 +24,11 @@ * This file is part of the TinyUSB stack. */ +/* metadata: + name: STM32 F746 Nucleo + url: https://www.st.com/en/evaluation-tools/nucleo-f746zg.html +*/ + #ifndef BOARD_H_ #define BOARD_H_ diff --git a/hw/bsp/stm32f7/boards/stm32f767nucleo/board.h b/hw/bsp/stm32f7/boards/stm32f767nucleo/board.h index 81cb60aeb..b5b3841f1 100644 --- a/hw/bsp/stm32f7/boards/stm32f767nucleo/board.h +++ b/hw/bsp/stm32f7/boards/stm32f767nucleo/board.h @@ -24,6 +24,11 @@ * This file is part of the TinyUSB stack. */ +/* metadata: + name: STM32 F767 Nucleo + url: https://www.st.com/en/evaluation-tools/nucleo-f767zi.html +*/ + #ifndef BOARD_H_ #define BOARD_H_ diff --git a/hw/bsp/stm32f7/boards/stm32f769disco/board.h b/hw/bsp/stm32f7/boards/stm32f769disco/board.h index 268919b61..8ac520619 100644 --- a/hw/bsp/stm32f7/boards/stm32f769disco/board.h +++ b/hw/bsp/stm32f7/boards/stm32f769disco/board.h @@ -24,6 +24,11 @@ * This file is part of the TinyUSB stack. */ +/* metadata: + name: STM32 F769 Discovery + url: https://www.st.com/en/evaluation-tools/32f769idiscovery.html +*/ + #ifndef BOARD_H_ #define BOARD_H_ diff --git a/hw/bsp/stm32f7/family.c b/hw/bsp/stm32f7/family.c index 527fbfe5c..5f63834d0 100644 --- a/hw/bsp/stm32f7/family.c +++ b/hw/bsp/stm32f7/family.c @@ -26,6 +26,10 @@ * This file is part of the TinyUSB stack. */ +/* metadata: + manufacturer: STMicroelectronics +*/ + #include "stm32f7xx_hal.h" #include "bsp/board_api.h" diff --git a/hw/bsp/stm32g0/boards/stm32g0b1nucleo/board.h b/hw/bsp/stm32g0/boards/stm32g0b1nucleo/board.h index 9ebaf73f0..14d309da1 100644 --- a/hw/bsp/stm32g0/boards/stm32g0b1nucleo/board.h +++ b/hw/bsp/stm32g0/boards/stm32g0b1nucleo/board.h @@ -25,6 +25,11 @@ * This file is part of the TinyUSB stack. */ +/* metadata: + name: STM32 G0B1 Nucleo + url: https://www.st.com/en/evaluation-tools/nucleo-g0b1re.html +*/ + #ifndef BOARD_H_ #define BOARD_H_ diff --git a/hw/bsp/stm32g0/family.c b/hw/bsp/stm32g0/family.c index d1635be12..86f2af12e 100644 --- a/hw/bsp/stm32g0/family.c +++ b/hw/bsp/stm32g0/family.c @@ -25,6 +25,10 @@ * This file is part of the TinyUSB stack. */ +/* metadata: + manufacturer: STMicroelectronics +*/ + #include "stm32g0xx_hal.h" #include "bsp/board_api.h" #include "board.h" diff --git a/hw/bsp/stm32g4/boards/b_g474e_dpow1/board.h b/hw/bsp/stm32g4/boards/b_g474e_dpow1/board.h index e61b13170..d569783fc 100644 --- a/hw/bsp/stm32g4/boards/b_g474e_dpow1/board.h +++ b/hw/bsp/stm32g4/boards/b_g474e_dpow1/board.h @@ -24,6 +24,11 @@ * This file is part of the TinyUSB stack. */ +/* metadata: + name: STM32 B-G474E-DPOW1 Discovery kit + url: https://www.st.com/en/evaluation-tools/b-g474e-dpow1.html +*/ + #ifndef BOARD_H_ #define BOARD_H_ diff --git a/hw/bsp/stm32g4/boards/stm32g474nucleo/board.h b/hw/bsp/stm32g4/boards/stm32g474nucleo/board.h index aa2bf20bb..cfef1c09f 100644 --- a/hw/bsp/stm32g4/boards/stm32g474nucleo/board.h +++ b/hw/bsp/stm32g4/boards/stm32g474nucleo/board.h @@ -24,6 +24,11 @@ * This file is part of the TinyUSB stack. */ +/* metadata: + name: STM32 G474 Nucleo + url: https://www.st.com/en/evaluation-tools/nucleo-g474re.html +*/ + #ifndef BOARD_H_ #define BOARD_H_ diff --git a/hw/bsp/stm32g4/boards/stm32g491nucleo/board.h b/hw/bsp/stm32g4/boards/stm32g491nucleo/board.h index 7dd4ed9ae..be3d44645 100644 --- a/hw/bsp/stm32g4/boards/stm32g491nucleo/board.h +++ b/hw/bsp/stm32g4/boards/stm32g491nucleo/board.h @@ -24,6 +24,11 @@ * This file is part of the TinyUSB stack. */ +/* metadata: + name: STM32 G491 Nucleo + url: https://www.st.com/en/evaluation-tools/nucleo-g491re.html +*/ + #ifndef BOARD_H_ #define BOARD_H_ diff --git a/hw/bsp/stm32g4/family.c b/hw/bsp/stm32g4/family.c index 2259cb9e2..d0ef7e503 100644 --- a/hw/bsp/stm32g4/family.c +++ b/hw/bsp/stm32g4/family.c @@ -24,6 +24,10 @@ * This file is part of the TinyUSB stack. */ +/* metadata: + manufacturer: STMicroelectronics +*/ + #include "stm32g4xx_hal.h" #include "stm32g4xx_ll_bus.h" diff --git a/hw/bsp/stm32h5/boards/stm32h503nucleo/board.h b/hw/bsp/stm32h5/boards/stm32h503nucleo/board.h index da20cfa3a..c8b5e31f5 100644 --- a/hw/bsp/stm32h5/boards/stm32h503nucleo/board.h +++ b/hw/bsp/stm32h5/boards/stm32h503nucleo/board.h @@ -25,6 +25,11 @@ * This file is part of the TinyUSB stack. */ +/* metadata: + name: STM32 H503 Nucleo + url: https://www.st.com/en/evaluation-tools/nucleo-h503rb.html +*/ + #ifndef BOARD_H_ #define BOARD_H_ diff --git a/hw/bsp/stm32h5/boards/stm32h563nucleo/board.h b/hw/bsp/stm32h5/boards/stm32h563nucleo/board.h index c4e0f680b..adc3d751a 100644 --- a/hw/bsp/stm32h5/boards/stm32h563nucleo/board.h +++ b/hw/bsp/stm32h5/boards/stm32h563nucleo/board.h @@ -25,6 +25,11 @@ * This file is part of the TinyUSB stack. */ +/* metadata: + name: STM32 H563 Nucleo + url: https://www.st.com/en/evaluation-tools/nucleo-h563zi.html +*/ + #ifndef BOARD_H_ #define BOARD_H_ diff --git a/hw/bsp/stm32h5/boards/stm32h573i_dk/board.h b/hw/bsp/stm32h5/boards/stm32h573i_dk/board.h index 7baef6ca6..d75114397 100644 --- a/hw/bsp/stm32h5/boards/stm32h573i_dk/board.h +++ b/hw/bsp/stm32h5/boards/stm32h573i_dk/board.h @@ -25,6 +25,11 @@ * This file is part of the TinyUSB stack. */ +/* metadata: + name: STM32 H573i Discovery + url: https://www.st.com/en/evaluation-tools/stm32h573i-dk.html +*/ + #ifndef BOARD_H_ #define BOARD_H_ diff --git a/hw/bsp/stm32h5/family.c b/hw/bsp/stm32h5/family.c index 02500db4e..efc5bb7b1 100644 --- a/hw/bsp/stm32h5/family.c +++ b/hw/bsp/stm32h5/family.c @@ -25,6 +25,9 @@ * This file is part of the TinyUSB stack. */ +/* metadata: + manufacturer: STMicroelectronics +*/ // Suppress warning caused by mcu driver #ifdef __GNUC__ diff --git a/hw/bsp/stm32h7/boards/daisyseed/board.h b/hw/bsp/stm32h7/boards/daisyseed/board.h index 2d681d640..300ecb8b2 100644 --- a/hw/bsp/stm32h7/boards/daisyseed/board.h +++ b/hw/bsp/stm32h7/boards/daisyseed/board.h @@ -24,6 +24,11 @@ * This file is part of the TinyUSB stack. */ +/* metadata: + name: Daisy Seed + url: https://electro-smith.com/products/daisy-seed +*/ + #ifndef BOARD_H_ #define BOARD_H_ diff --git a/hw/bsp/stm32h7/boards/stm32h723nucleo/board.h b/hw/bsp/stm32h7/boards/stm32h723nucleo/board.h index c5257901d..f623149bd 100644 --- a/hw/bsp/stm32h7/boards/stm32h723nucleo/board.h +++ b/hw/bsp/stm32h7/boards/stm32h723nucleo/board.h @@ -24,6 +24,11 @@ * This file is part of the TinyUSB stack. */ +/* metadata: + name: STM32 H723 Nucleo + url: https://www.st.com/en/evaluation-tools/nucleo-h723zg.html +*/ + #ifndef BOARD_H_ #define BOARD_H_ diff --git a/hw/bsp/stm32h7/boards/stm32h743eval/board.h b/hw/bsp/stm32h7/boards/stm32h743eval/board.h index fa9721be3..821c799d7 100644 --- a/hw/bsp/stm32h7/boards/stm32h743eval/board.h +++ b/hw/bsp/stm32h7/boards/stm32h743eval/board.h @@ -24,10 +24,14 @@ * This file is part of the TinyUSB stack. */ +/* metadata: + name: STM32 H743 Eval + url: https://www.st.com/en/evaluation-tools/stm32h743i-eval.html +*/ + #ifndef BOARD_H_ #define BOARD_H_ -#ifdef __cplusplus extern "C" { #endif diff --git a/hw/bsp/stm32h7/boards/stm32h743nucleo/board.h b/hw/bsp/stm32h7/boards/stm32h743nucleo/board.h index 0606f395a..0277d05c7 100644 --- a/hw/bsp/stm32h7/boards/stm32h743nucleo/board.h +++ b/hw/bsp/stm32h7/boards/stm32h743nucleo/board.h @@ -24,6 +24,11 @@ * This file is part of the TinyUSB stack. */ +/* metadata: + name: STM32 H743 Nucleo + url: https://www.st.com/en/evaluation-tools/nucleo-h743zi.html +*/ + #ifndef BOARD_H_ #define BOARD_H_ diff --git a/hw/bsp/stm32h7/boards/stm32h745disco/board.h b/hw/bsp/stm32h7/boards/stm32h745disco/board.h index b9d9cdea4..ebdd5a17a 100644 --- a/hw/bsp/stm32h7/boards/stm32h745disco/board.h +++ b/hw/bsp/stm32h7/boards/stm32h745disco/board.h @@ -24,6 +24,11 @@ * This file is part of the TinyUSB stack. */ +/* metadata: + name: STM32 H745 Discovery + url: https://www.st.com/en/evaluation-tools/stm32h745i-disco.html +*/ + #ifndef BOARD_H_ #define BOARD_H_ diff --git a/hw/bsp/stm32h7/boards/stm32h750_weact/board.h b/hw/bsp/stm32h7/boards/stm32h750_weact/board.h index f1c363082..e11a55103 100644 --- a/hw/bsp/stm32h7/boards/stm32h750_weact/board.h +++ b/hw/bsp/stm32h7/boards/stm32h750_weact/board.h @@ -24,6 +24,11 @@ * This file is part of the TinyUSB stack. */ +/* metadata: + name: STM32 H750 WeAct + url: https://www.adafruit.com/product/5032 +*/ + #ifndef BOARD_H_ #define BOARD_H_ diff --git a/hw/bsp/stm32h7/boards/stm32h750bdk/board.h b/hw/bsp/stm32h7/boards/stm32h750bdk/board.h index 2895f0973..ac417601b 100644 --- a/hw/bsp/stm32h7/boards/stm32h750bdk/board.h +++ b/hw/bsp/stm32h7/boards/stm32h750bdk/board.h @@ -24,6 +24,11 @@ * This file is part of the TinyUSB stack. */ +/* metadata: + name: STM32 H750b Discovery Kit + url: https://www.st.com/en/evaluation-tools/stm32h750b-dk.html +*/ + #ifndef BOARD_H_ #define BOARD_H_ diff --git a/hw/bsp/stm32h7/boards/waveshare_openh743i/board.h b/hw/bsp/stm32h7/boards/waveshare_openh743i/board.h index 625c6a137..bfaf42784 100644 --- a/hw/bsp/stm32h7/boards/waveshare_openh743i/board.h +++ b/hw/bsp/stm32h7/boards/waveshare_openh743i/board.h @@ -26,6 +26,11 @@ * This file is part of the TinyUSB stack. */ +/* metadata: + name: Waveshare Open H743i + url: https://www.waveshare.com/openh743i-c-standard.htm +*/ + #ifndef BOARD_H_ #define BOARD_H_ diff --git a/hw/bsp/stm32h7/family.c b/hw/bsp/stm32h7/family.c index 0be18350c..e5228b29b 100644 --- a/hw/bsp/stm32h7/family.c +++ b/hw/bsp/stm32h7/family.c @@ -27,6 +27,10 @@ * This file is part of the TinyUSB stack. */ +/* metadata: + manufacturer: STMicroelectronics +*/ + #include "stm32h7xx_hal.h" #include "bsp/board_api.h" diff --git a/hw/bsp/stm32l0/boards/stm32l052dap52/board.h b/hw/bsp/stm32l0/boards/stm32l052dap52/board.h index ee83bbcbc..50bbafadb 100644 --- a/hw/bsp/stm32l0/boards/stm32l052dap52/board.h +++ b/hw/bsp/stm32l0/boards/stm32l052dap52/board.h @@ -24,6 +24,11 @@ * This file is part of the TinyUSB stack. */ +/* metadata: + name: STM32 L052 DAP + url: n/a +*/ + #ifndef BOARD_H_ #define BOARD_H_ diff --git a/hw/bsp/stm32l0/boards/stm32l0538disco/board.h b/hw/bsp/stm32l0/boards/stm32l0538disco/board.h index 5cda1c15a..29402f00a 100644 --- a/hw/bsp/stm32l0/boards/stm32l0538disco/board.h +++ b/hw/bsp/stm32l0/boards/stm32l0538disco/board.h @@ -24,6 +24,11 @@ * This file is part of the TinyUSB stack. */ +/* metadata: + name: STM32 L0538 Discovery + url: https://www.st.com/en/evaluation-tools/32l0538discovery.html +*/ + #ifndef BOARD_H_ #define BOARD_H_ diff --git a/hw/bsp/stm32l0/family.c b/hw/bsp/stm32l0/family.c index c8c88d687..b28903e00 100644 --- a/hw/bsp/stm32l0/family.c +++ b/hw/bsp/stm32l0/family.c @@ -24,6 +24,10 @@ * This file is part of the TinyUSB stack. */ +/* metadata: + manufacturer: STMicroelectronics +*/ + #include "stm32l0xx_hal.h" #include "bsp/board_api.h" #include "board.h" diff --git a/hw/bsp/stm32l4/boards/stm32l412nucleo/board.h b/hw/bsp/stm32l4/boards/stm32l412nucleo/board.h index 72d17b760..980e1e321 100644 --- a/hw/bsp/stm32l4/boards/stm32l412nucleo/board.h +++ b/hw/bsp/stm32l4/boards/stm32l412nucleo/board.h @@ -24,6 +24,11 @@ * This file is part of the TinyUSB stack. */ +/* metadata: + name: STM32 L412 Nucleo + url: https://www.st.com/en/evaluation-tools/nucleo-l412kb.html +*/ + #ifndef BOARD_H_ #define BOARD_H_ diff --git a/hw/bsp/stm32l4/boards/stm32l476disco/board.h b/hw/bsp/stm32l4/boards/stm32l476disco/board.h index 9d4351b39..8c766d8ea 100644 --- a/hw/bsp/stm32l4/boards/stm32l476disco/board.h +++ b/hw/bsp/stm32l4/boards/stm32l476disco/board.h @@ -24,6 +24,11 @@ * This file is part of the TinyUSB stack. */ +/* metadata: + name: STM32 L476 Disco + url: https://www.st.com/en/evaluation-tools/32l476gdiscovery.html +*/ + #ifndef BOARD_H_ #define BOARD_H_ diff --git a/hw/bsp/stm32l4/boards/stm32l4p5nucleo/board.h b/hw/bsp/stm32l4/boards/stm32l4p5nucleo/board.h index 47ada6bb9..f522e7522 100644 --- a/hw/bsp/stm32l4/boards/stm32l4p5nucleo/board.h +++ b/hw/bsp/stm32l4/boards/stm32l4p5nucleo/board.h @@ -24,6 +24,11 @@ * This file is part of the TinyUSB stack. */ +/* metadata: + name: STM32 L4P5 Nucleo + url: https://www.st.com/en/evaluation-tools/nucleo-l4p5zg.html +*/ + #ifndef BOARD_H_ #define BOARD_H_ diff --git a/hw/bsp/stm32l4/boards/stm32l4r5nucleo/board.h b/hw/bsp/stm32l4/boards/stm32l4r5nucleo/board.h index 47ada6bb9..c181f5d4a 100644 --- a/hw/bsp/stm32l4/boards/stm32l4r5nucleo/board.h +++ b/hw/bsp/stm32l4/boards/stm32l4r5nucleo/board.h @@ -24,6 +24,11 @@ * This file is part of the TinyUSB stack. */ +/* metadata: + name: STM32 L4R5 Nucleo + url: https://www.st.com/en/evaluation-tools/nucleo-l4r5zi.html +*/ + #ifndef BOARD_H_ #define BOARD_H_ diff --git a/hw/bsp/stm32l4/family.c b/hw/bsp/stm32l4/family.c index 965c4810a..2b555b5c2 100644 --- a/hw/bsp/stm32l4/family.c +++ b/hw/bsp/stm32l4/family.c @@ -26,6 +26,10 @@ * This file is part of the TinyUSB stack. */ +/* metadata: + manufacturer: STMicroelectronics +*/ + #include "stm32l4xx_hal.h" #include "bsp/board_api.h" #include "board.h" diff --git a/hw/bsp/stm32u5/boards/b_u585i_iot2a/board.h b/hw/bsp/stm32u5/boards/b_u585i_iot2a/board.h index 2f1c451db..cf3f63ea5 100644 --- a/hw/bsp/stm32u5/boards/b_u585i_iot2a/board.h +++ b/hw/bsp/stm32u5/boards/b_u585i_iot2a/board.h @@ -24,6 +24,11 @@ * This file is part of the TinyUSB stack. */ +/* metadata: + name: STM32 B-U585i IOT2A Discovery kit + url: https://www.st.com/en/evaluation-tools/b-u585i-iot02a.html +*/ + #ifndef BOARD_H_ #define BOARD_H_ diff --git a/hw/bsp/stm32u5/boards/stm32u545nucleo/board.h b/hw/bsp/stm32u5/boards/stm32u545nucleo/board.h index 7f3bf462c..0c3439b2c 100644 --- a/hw/bsp/stm32u5/boards/stm32u545nucleo/board.h +++ b/hw/bsp/stm32u5/boards/stm32u545nucleo/board.h @@ -24,6 +24,11 @@ * This file is part of the TinyUSB stack. */ +/* metadata: + name: STM32 U545 Nucleo + url: https://www.st.com/en/evaluation-tools/nucleo-u545re-q.html +*/ + #ifndef BOARD_H_ #define BOARD_H_ diff --git a/hw/bsp/stm32u5/boards/stm32u575eval/board.h b/hw/bsp/stm32u5/boards/stm32u575eval/board.h index bd91502af..b11f6a747 100644 --- a/hw/bsp/stm32u5/boards/stm32u575eval/board.h +++ b/hw/bsp/stm32u5/boards/stm32u575eval/board.h @@ -25,6 +25,11 @@ * This file is part of the TinyUSB stack. */ +/* metadata: + name: STM32 U575 Eval + url: https://www.st.com/en/evaluation-tools/stm32u575i-ev.html +*/ + #ifndef BOARD_H_ #define BOARD_H_ diff --git a/hw/bsp/stm32u5/boards/stm32u575nucleo/board.h b/hw/bsp/stm32u5/boards/stm32u575nucleo/board.h index 6d244d418..be037b68a 100644 --- a/hw/bsp/stm32u5/boards/stm32u575nucleo/board.h +++ b/hw/bsp/stm32u5/boards/stm32u575nucleo/board.h @@ -24,6 +24,11 @@ * This file is part of the TinyUSB stack. */ +/* metadata: + name: STM32 U575 Nucleo + url: https://www.st.com/en/evaluation-tools/nucleo-u575zi-q.html +*/ + #ifndef BOARD_H_ #define BOARD_H_ diff --git a/hw/bsp/stm32u5/boards/stm32u5a5nucleo/board.h b/hw/bsp/stm32u5/boards/stm32u5a5nucleo/board.h index 062fb807f..0785fb36b 100644 --- a/hw/bsp/stm32u5/boards/stm32u5a5nucleo/board.h +++ b/hw/bsp/stm32u5/boards/stm32u5a5nucleo/board.h @@ -24,6 +24,11 @@ * This file is part of the TinyUSB stack. */ +/* metadata: + name: STM32 U5a5 Nucleo + url: https://www.st.com/en/evaluation-tools/nucleo-u5a5zj-q.html +*/ + #ifndef BOARD_H_ #define BOARD_H_ diff --git a/hw/bsp/stm32u5/family.c b/hw/bsp/stm32u5/family.c index 3cc7cc511..032c01f34 100644 --- a/hw/bsp/stm32u5/family.c +++ b/hw/bsp/stm32u5/family.c @@ -25,6 +25,10 @@ * This file is part of the TinyUSB stack. */ +/* metadata: + manufacturer: STMicroelectronics +*/ + // Suppress warning caused by mcu driver #ifdef __GNUC__ #pragma GCC diagnostic push diff --git a/hw/bsp/stm32wb/boards/stm32wb55nucleo/board.h b/hw/bsp/stm32wb/boards/stm32wb55nucleo/board.h index ea975df03..704592506 100644 --- a/hw/bsp/stm32wb/boards/stm32wb55nucleo/board.h +++ b/hw/bsp/stm32wb/boards/stm32wb55nucleo/board.h @@ -24,6 +24,11 @@ * This file is part of the TinyUSB stack. */ +/* metadata: + name: STM32 P-NUCLEO-WB55 + url: https://www.st.com/en/evaluation-tools/p-nucleo-wb55.html +*/ + #ifndef BOARD_H_ #define BOARD_H_ diff --git a/hw/bsp/stm32wb/family.c b/hw/bsp/stm32wb/family.c index 6051388a7..43e1345c8 100644 --- a/hw/bsp/stm32wb/family.c +++ b/hw/bsp/stm32wb/family.c @@ -24,6 +24,10 @@ * This file is part of the TinyUSB stack. */ +/* metadata: + manufacturer: STMicroelectronics +*/ + #include "stm32wbxx_hal.h" #include "bsp/board_api.h" #include "board.h" diff --git a/hw/bsp/tm4c/boards/ek_tm4c123gxl/board.h b/hw/bsp/tm4c/boards/ek_tm4c123gxl/board.h index 5732056ae..c0ceb4cd8 100644 --- a/hw/bsp/tm4c/boards/ek_tm4c123gxl/board.h +++ b/hw/bsp/tm4c/boards/ek_tm4c123gxl/board.h @@ -24,6 +24,11 @@ * This file is part of the TinyUSB stack. */ +/* metadata: + name: TM4C123G LaunchPad + url: https://www.ti.com/tool/EK-TM4C123GXL +*/ + #ifndef _BOARD_H_ #define _BOARD_H_ diff --git a/hw/bsp/tm4c/family.c b/hw/bsp/tm4c/family.c index 5e1f6d3ff..4e5491005 100644 --- a/hw/bsp/tm4c/family.c +++ b/hw/bsp/tm4c/family.c @@ -1,3 +1,7 @@ +/* metadata: + manufacturer: Texas Instruments +*/ + #include "TM4C123.h" #include "bsp/board_api.h" #include "board.h" diff --git a/hw/bsp/xmc4000/boards/xmc4500_relax/board.h b/hw/bsp/xmc4000/boards/xmc4500_relax/board.h index 2d4764f40..3d0e92b2c 100644 --- a/hw/bsp/xmc4000/boards/xmc4500_relax/board.h +++ b/hw/bsp/xmc4000/boards/xmc4500_relax/board.h @@ -24,6 +24,11 @@ * This file is part of the TinyUSB stack. */ +/* metadata: + name: XMC4500 relax kit + url: https://www.infineon.com/cms/en/product/evaluation-boards/kit_xmc45_relax_v1/ +*/ + #ifndef BOARD_H_ #define BOARD_H_ diff --git a/hw/bsp/xmc4000/boards/xmc4700_relax/board.h b/hw/bsp/xmc4000/boards/xmc4700_relax/board.h index aa12fde3b..f3972980c 100644 --- a/hw/bsp/xmc4000/boards/xmc4700_relax/board.h +++ b/hw/bsp/xmc4000/boards/xmc4700_relax/board.h @@ -24,6 +24,11 @@ * This file is part of the TinyUSB stack. */ +/* metadata: + name: XMC4700 relax kit + url: https://www.infineon.com/cms/en/product/evaluation-boards/kit_xmc47_relax_v1/ +*/ + #ifndef BOARD_H_ #define BOARD_H_ diff --git a/hw/bsp/xmc4000/family.c b/hw/bsp/xmc4000/family.c index c776cb58a..1acce024b 100644 --- a/hw/bsp/xmc4000/family.c +++ b/hw/bsp/xmc4000/family.c @@ -24,6 +24,10 @@ * This file is part of the TinyUSB stack. */ +/* metadata: + manufacturer: Infineon +*/ + #include "xmc_gpio.h" #include "xmc_scu.h" #include "xmc_uart.h" diff --git a/tools/gen_doc.py b/tools/gen_doc.py index c69f3ff29..318ff8089 100755 --- a/tools/gen_doc.py +++ b/tools/gen_doc.py @@ -1,4 +1,5 @@ #!/usr/bin/env python3 +import re import pandas as pd from tabulate import tabulate from pathlib import Path @@ -11,7 +12,6 @@ TOP = Path(__file__).parent.parent.resolve() # ----------------------------------------- # Dependencies # ----------------------------------------- - def gen_deps_doc(): deps_rst = Path(TOP) / "docs/reference/dependencies.rst" df = pd.DataFrame.from_dict(deps_all, orient='index', columns=['Repo', 'Commit', 'Required by']) @@ -32,5 +32,81 @@ MCU low-level peripheral driver and external libraries for building TinyUSB exam f.write(outstr) +# ----------------------------------------- +# Dependencies +# ----------------------------------------- +def extract_metadata(file_path): + metadata = {} + try: + with open(file_path, 'r') as file: + content = file.read() + # Match metadata block + match = re.search(r'/\*\s*metadata:(.*?)\*/', content, re.DOTALL) + if match: + block = match.group(1) + # Extract key-value pairs + for line in block.splitlines(): + key_value = re.match(r'\s*(\w+):\s*(.+)', line) + if key_value: + key, value = key_value.groups() + metadata[key] = value.strip() + except FileNotFoundError: + pass + return metadata + + +def gen_boards_doc(): + # 'Manufacturer' : { 'Board' } + vendor_data = {} + # 'Board' : [ 'Name', 'Family', 'url', 'note' ] + all_boards = {} + # extract metadata from family.c + for family_dir in sorted((Path(TOP) / "hw/bsp").iterdir()): + if family_dir.is_dir(): + family_c = family_dir / "family.c" + if not family_c.exists(): + family_c = family_dir / "boards/family.c" + f_meta = extract_metadata(family_c) + if not f_meta: + continue + manuf = f_meta.get('manufacturer', '') + if manuf not in vendor_data: + vendor_data[manuf] = {} + # extract metadata from board.h + for board_dir in sorted((family_dir / "boards").iterdir()): + if board_dir.is_dir(): + b_meta = extract_metadata(board_dir / "board.h") + if not b_meta: + continue + b_entry = [ + b_meta.get('name', ''), + family_dir.name, + b_meta.get('url', ''), + b_meta.get('note', '') + ] + vendor_data[manuf][board_dir.name] = b_entry + boards_rst = Path(TOP) / "docs/reference/boards.rst" + with boards_rst.open('w') as f: + title = f"""\ +**************** +Supported Boards +**************** + +Following boards are supported and can be used to run stock examples + +""" + f.write(title) + for manuf, boards in sorted(vendor_data.items()): + f.write(f"\n\n{manuf}\n") + f.write(f"{'=' * len(manuf)}\n\n") + df = pd.DataFrame.from_dict(boards, orient='index', columns=['Name', 'Family', 'URL', 'Note']) + df = df.rename_axis("Board") + f.write(tabulate(df, headers="keys", tablefmt='rst')) + + +# ----------------------------------------- +# Main +# ----------------------------------------- if __name__ == "__main__": gen_deps_doc() + gen_boards_doc() -- cgit v1.3.1 From 824793a428aea082b4ae887ce7a26b4736e1d2cc Mon Sep 17 00:00:00 2001 From: hathach Date: Fri, 27 Dec 2024 09:58:07 +0700 Subject: move mcu supported to README.rst, separated supported boards to boards.rst --- README.rst | 213 +++++++++----- docs/reference/boards.rst | 39 +-- docs/reference/getting_started.rst | 2 +- docs/reference/index.rst | 1 - docs/reference/supported.rst | 442 ---------------------------- hw/bsp/stm32h7/boards/stm32h743eval/board.h | 1 + tools/gen_doc.py | 11 +- 7 files changed, 176 insertions(+), 533 deletions(-) delete mode 100644 docs/reference/supported.rst (limited to 'tools') diff --git a/README.rst b/README.rst index db36cad3b..eb024968e 100644 --- a/README.rst +++ b/README.rst @@ -82,8 +82,8 @@ Host Stack Similar to the Device Stack, if you have a special requirement, `usbh_app_driver_get_cb()` can be used to write your own class driver without modifying the stack. -TypeC PD Stack -============== +Power Delivery Stack +==================== - Power Delivery 3.0 (PD3.0) with USB Type-C support (WIP) - Super early stage, only for testing purpose @@ -102,75 +102,150 @@ TinyUSB is completely thread-safe by pushing all Interrupt Service Request (ISR) Supported CPUs ============== -Following CPUs are supported, check out `Supported Devices`_ for comprehensive list of driver, features for each CPU. - -+--------------+------------------------------------------------------------+ -| Manufacturer | Family | -+==============+============================================================+ -| Allwinner | F1C100s/F1C200s | -+--------------+------------------------------------------------------------+ -| Analog | max32: 650, 666, 690. max78002 | -| | | -| | max3421e (spi host) | -+--------------+------------------------------------------------------------+ -| Brigetek | FT90x | -+--------------+------------------------------------------------------------+ -| Broadcom | BCM2711, BCM2837 | -+--------------+------------------------------------------------------------+ -| Dialog | DA1469x | -+--------------+------------------------------------------------------------+ -| Espressif | ESP32 S2, S3 | -+--------------+------------------------------------------------------------+ -| GigaDevice | GD32VF103 | -+--------------+------------------------------------------------------------+ -| Infineon | XMC4500 | -+--------------+------------------------------------------------------------+ -| | SAM: D11, D21, D51, E5x, G55, L2x, E7x, S7x, V7x | -| MicroChip | | -| | PIC: 24, 32mm, 32mk, 32mx, 32mz, dsPIC33 | -+--------------+------------------------------------------------------------+ -| Mind Montion | mm32 | -+--------------+------------------------------------------------------------+ -| NordicSemi | nRF52833, nRF52840, nRF5340 | -+--------------+------------------------------------------------------------+ -| Nuvoton | NUC 120, 121, 125, 126, 505 | -+--------------+------------------------------------------------------------+ -| NXP | iMXRT: RT10xx, RT11xx | -| | | -| | Kinetis: KL, K32L2 | -| | | -| | LPC: 11u, 13, 15, 17, 18, 40, 43, 51u, 54, 55 | -| | | -| | MCX: A15, N9 | -+--------------+------------------------------------------------------------+ -| Raspberry Pi | RP2040, RP2350 | -+--------------+-----+------------------------------------------------------+ -| Renesas | RA: 4M1, 4M3, 6M1, 6M5 | -| | | -| | RX: 63N, 65N, 72N | -+--------------+-----+------------------------------------------------------+ -| Silabs | EFM32GG12 | -+--------------+------------------------------------------------------------+ -| Sony | CXD56 | -+--------------+------------------------------------------------------------+ -| ST STM32 | C0, F0, F1, F2, F3, F4, F7, G0, G4, H5, H7, | -| | | -| | L0, L1, L4, L4+, L5, U5, WB | -+--------------+------------------------------------------------------------+ -| TI | MSP430, MSP432E4, TM4C123 | -+--------------+------------------------------------------------------------+ -| ValentyUSB | eptri | -+--------------+------------------------------------------------------------+ -| WCH | CH32F: F20x | -| | | -| | CH32V: V20x, V307 | -+--------------+------------------------------------------------------------+ ++--------------+-----------------------------+--------+------+-----------+------------------------+-------------------+ +| Manufacturer | Family | Device | Host | Highspeed | Driver | Note | ++==============+=============================+========+======+===========+========================+===================+ +| Allwinner | F1C100s/F1C200s | ✔ | | ✔ | sunxi | musb variant | ++--------------+-----------------------------+--------+------+-----------+------------------------+-------------------+ +| Analog | MAX3421E | | ✔ | ✖ | max3421 | via SPI | +| +-----------------------------+--------+------+-----------+------------------------+-------------------+ +| | MAX32 650, 666, 690, | ✔ | | ✔ | musb | 1-dir ep | +| | MAX78002 | | | | | | ++--------------+-----------------------------+--------+------+-----------+------------------------+-------------------+ +| Brigetek | FT90x | ✔ | | ✔ | ft9xx | 1-dir ep | ++--------------+-----------------------------+--------+------+-----------+------------------------+-------------------+ +| Broadcom | BCM2711, BCM2837 | ✔ | | ✔ | dwc2 | | ++--------------+-----------------------------+--------+------+-----------+------------------------+-------------------+ +| Dialog | DA1469x | ✔ | ✖ | ✖ | da146xx | | ++--------------+-----------------------------+--------+------+-----------+------------------------+-------------------+ +| Espressif | S2, S3 | ✔ | ✔ | ✖ | dwc2 or esp32sx | | +| ESP32 +-----------------------------+--------+------+-----------+------------------------+-------------------+ +| | P4 | ✔ | ✔ | ✔ | dwc2 | | ++--------------+----+------------------------+--------+------+-----------+------------------------+-------------------+ +| GigaDevice | GD32VF103 | ✔ | | ✖ | dwc2 | | ++--------------+-----------------------------+--------+------+-----------+------------------------+-------------------+ +| Infineon | XMC4500 | ✔ | ✔ | ✖ | dwc2 | | ++--------------+-----+-----------------------+--------+------+-----------+------------------------+-------------------+ +| MicroChip | SAM | D11, D21, L21, L22 | ✔ | | ✖ | samd | | +| | +-----------------------+--------+------+-----------+------------------------+-------------------+ +| | | D51, E5x | ✔ | | ✖ | samd | | +| | +-----------------------+--------+------+-----------+------------------------+-------------------+ +| | | G55 | ✔ | | ✖ | samg | 1-dir ep | +| | +-----------------------+--------+------+-----------+------------------------+-------------------+ +| | | E70,S70,V70,V71 | ✔ | | ✔ | samx7x | 1-dir ep | +| +-----+-----------------------+--------+------+-----------+------------------------+-------------------+ +| | PIC | 24 | ✔ | | | pic | ci_fs variant | +| | +-----------------------+--------+------+-----------+------------------------+-------------------+ +| | | 32 mm, mk, mx | ✔ | | | pic | ci_fs variant | +| | +-----------------------+--------+------+-----------+------------------------+-------------------+ +| | | dsPIC33 | ✔ | | | pic | ci_fs variant | +| | +-----------------------+--------+------+-----------+------------------------+-------------------+ +| | | 32mz | ✔ | | | pic32mz | musb variant | ++--------------+-----+-----------------------+--------+------+-----------+------------------------+-------------------+ +| Mind Montion | mm32 | ✔ | | ✖ | mm32f327x_otg | ci_fs variant | ++--------------+-----+-----------------------+--------+------+-----------+------------------------+-------------------+ +| NordicSemi | nRF 52833, 52840, 5340 | ✔ | ✖ | ✖ | nrf5x | only ep8 is ISO | ++--------------+-----------------------------+--------+------+-----------+------------------------+-------------------+ +| Nuvoton | NUC120 | ✔ | ✖ | ✖ | nuc120 | | +| +-----------------------------+--------+------+-----------+------------------------+-------------------+ +| | NUC121/NUC125 | ✔ | ✖ | ✖ | nuc121 | | +| +-----------------------------+--------+------+-----------+------------------------+-------------------+ +| | NUC126 | ✔ | ✖ | ✖ | nuc121 | | +| +-----------------------------+--------+------+-----------+------------------------+-------------------+ +| | NUC505 | ✔ | | ✔ | nuc505 | | ++--------------+---------+-------------------+--------+------+-----------+------------------------+-------------------+ +| NXP | iMXRT | RT 10xx, 11xx | ✔ | ✔ | ✔ | ci_hs | | +| +---------+-------------------+--------+------+-----------+------------------------+-------------------+ +| | Kinetis | KL | ✔ | ⚠ | ✖ | ci_fs, khci | | +| | +-------------------+--------+------+-----------+------------------------+-------------------+ +| | | K32L2 | ✔ | | ✖ | khci | ci_fs variant | +| +---------+-------------------+--------+------+-----------+------------------------+-------------------+ +| | LPC | 11u, 13, 15 | ✔ | ✖ | ✖ | lpc_ip3511 | | +| | +-------------------+--------+------+-----------+------------------------+-------------------+ +| | | 17, 40 | ✔ | ⚠ | ✖ | lpc17_40 | | +| | +-------------------+--------+------+-----------+------------------------+-------------------+ +| | | 18, 43 | ✔ | ✔ | ✔ | ci_hs | | +| | +-------------------+--------+------+-----------+------------------------+-------------------+ +| | | 51u | ✔ | ✖ | ✖ | lpc_ip3511 | | +| | +-------------------+--------+------+-----------+------------------------+-------------------+ +| | | 54, 55 | ✔ | | ✔ | lpc_ip3511 | | +| +---------+-------------------+--------+------+-----------+------------------------+-------------------+ +| | MCX | N9, A15 | ✔ | | ✔ | ci_fs, ci_hs | | ++--------------+---------+-------------------+--------+------+-----------+------------------------+-------------------+ +| Raspberry Pi | RP2040, RP2350 | ✔ | ✔ | ✖ | rp2040, pio_usb | | ++--------------+-----+-----------------------+--------+------+-----------+------------------------+-------------------+ +| Renesas | RX | 63N, 65N, 72N | ✔ | ✔ | ✖ | rusb2 | | +| +-----+-----------------------+--------+------+-----------+------------------------+-------------------+ +| | RA | 4M1, 4M3, 6M1 | ✔ | ✔ | ✖ | rusb2 | | +| | +-----------------------+--------+------+-----------+------------------------+-------------------+ +| | | 6M5 | ✔ | ✔ | ✔ | rusb2 | | ++--------------+-----+-----------------------+--------+------+-----------+------------------------+-------------------+ +| Silabs | EFM32GG12 | ✔ | | ✖ | dwc2 | | ++--------------+-----------------------------+--------+------+-----------+------------------------+-------------------+ +| Sony | CXD56 | ✔ | ✖ | ✔ | cxd56 | | ++--------------+-----------------------------+--------+------+-----------+------------------------+-------------------+ +| ST STM32 | F0 | ✔ | ✖ | ✖ | stm32_fsdev | | +| +----+------------------------+--------+------+-----------+------------------------+-------------------+ +| | F1 | 102, 103 | ✔ | ✖ | ✖ | stm32_fsdev | | +| | +------------------------+--------+------+-----------+------------------------+-------------------+ +| | | 105, 107 | ✔ | ✔ | ✖ | dwc2 | | +| +----+------------------------+--------+------+-----------+------------------------+-------------------+ +| | F2, F4, F7, H7 | ✔ | ✔ | ✔ | dwc2 | | +| +-----------------------------+--------+------+-----------+------------------------+-------------------+ +| | F3 | ✔ | ✖ | ✖ | stm32_fsdev | | +| +-----------------------------+--------+------+-----------+------------------------+-------------------+ +| | C0, G0, H5 | ✔ | | ✖ | stm32_fsdev | | +| +-----------------------------+--------+------+-----------+------------------------+-------------------+ +| | G4 | ✔ | ✖ | ✖ | stm32_fsdev | | +| +-----------------------------+--------+------+-----------+------------------------+-------------------+ +| | L0, L1 | ✔ | ✖ | ✖ | stm32_fsdev | | +| +----+------------------------+--------+------+-----------+------------------------+-------------------+ +| | L4 | 4x2, 4x3 | ✔ | ✖ | ✖ | stm32_fsdev | | +| | +------------------------+--------+------+-----------+------------------------+-------------------+ +| | | 4x5, 4x6 | ✔ | ✔ | ✖ | dwc2 | | +| +----+------------------------+--------+------+-----------+------------------------+-------------------+ +| | L4+ | ✔ | ✔ | ✖ | dwc2 | | +| +-----------------------------+--------+------+-----------+------------------------+-------------------+ +| | L5 | ✔ | ✖ | ✖ | stm32_fsdev | | +| +----+------------------------+--------+------+-----------+------------------------+-------------------+ +| | U5 | 535, 545 | ✔ | | ✖ | stm32_fsdev | | +| | +------------------------+--------+------+-----------+------------------------+-------------------+ +| | | 575, 585 | ✔ | ✔ | ✖ | dwc2 | | +| | +------------------------+--------+------+-----------+------------------------+-------------------+ +| | | 59x,5Ax,5Fx,5Gx | ✔ | ✔ | ✔ | dwc2 | | +| +----+------------------------+--------+------+-----------+------------------------+-------------------+ +| | WBx5 | ✔ | ✖ | ✖ | stm32_fsdev | | ++--------------+-----------------------------+--------+------+-----------+------------------------+-------------------+ +| TI | MSP430 | ✔ | ✖ | ✖ | msp430x5xx | | +| +-----------------------------+--------+------+-----------+------------------------+-------------------+ +| | MSP432E4 | ✔ | | ✖ | musb | | +| +-----------------------------+--------+------+-----------+------------------------+-------------------+ +| | TM4C123 | ✔ | | ✖ | musb | | ++--------------+-----------------------------+--------+------+-----------+------------------------+-------------------+ +| ValentyUSB | eptri | ✔ | ✖ | ✖ | eptri | | ++--------------+-----------------------------+--------+------+-----------+------------------------+-------------------+ +| WCH | CH32F20x | ✔ | | ✔ | ch32_usbhs | | +| +-----------------------------+--------+------+-----------+------------------------+-------------------+ +| | CH32V20x | ✔ | | ✖ | stm32_fsdev/ch32_usbfs | | +| +-----------------------------+--------+------+-----------+------------------------+-------------------+ +| | CH32V307 | ✔ | | ✔ | ch32_usbfs/hs | | ++--------------+-----------------------------+--------+------+-----------+------------------------+-------------------+ + +Table Legend +------------ + +========= ========================= +✔ Supported +⚠ Partial support +✖ Not supported by hardware +\[empty\] Unknown +========= ========================= License ======= -All TinyUSB sources in the ``src`` folder are licensed under MIT -license, the `Full license is here `__. However, each file can be +All TinyUSB files in the ``src`` folder are licensed under the `MIT +license `__. while other files can be individually licensed especially those in ``lib`` and ``hw/mcu`` folder. Please make sure you understand all the license term for files you use in your project. @@ -186,8 +261,8 @@ Docs - `Reference`_ - - `Supported Devices`_ - `Getting Started`_ + - `Supported Boards`_ - `Dependencies`_ - `Concurrency`_ @@ -213,8 +288,8 @@ Docs .. _Changelog: docs/info/changelog.rst .. _Contributors: CONTRIBUTORS.rst .. _Reference: docs/reference/index.rst -.. _Supported Devices: docs/reference/supported.rst .. _Getting Started: docs/reference/getting_started.rst +.. _Supported Boards: docs/reference/boards.rst .. _Dependencies: docs/reference/dependencies.rst .. _Concurrency: docs/reference/concurrency.rst .. _Contributing: docs/contributing/index.rst diff --git a/docs/reference/boards.rst b/docs/reference/boards.rst index 424336dad..4739467bc 100644 --- a/docs/reference/boards.rst +++ b/docs/reference/boards.rst @@ -2,12 +2,17 @@ Supported Boards **************** -Following boards are supported and can be used to run stock examples +The board support code is only used for self-contained examples and testing. It is not used when TinyUSB is part of a larger project. +It is responsible for getting the MCU started and the USB peripheral clocked with minimal of on-board devices +- One LED : for status +- One Button : to get input from user +- One UART : optional for device, but required for host examples +Following boards are supported Analog Devices -============== +-------------- ============= ================ ======== =========================================================================================================================== ====== Board Name Family URL Note @@ -23,7 +28,7 @@ max78002evkit MAX78002 EVKIT max78002 https://www.analog.com/en/resources/e ============= ================ ======== =========================================================================================================================== ====== Bridgetek -========= +--------- ========= ========= ======== ===================================== ====== Board Name Family URL Note @@ -32,7 +37,7 @@ mm900evxb MM900EVxB brtmm90x https://brtchip.com/product/mm900ev1b ========= ========= ======== ===================================== ====== Espressif -========= +--------- ========================= ============================== ========= ======================================================================================================== ====== Board Name Family URL Note @@ -54,7 +59,7 @@ espressif_saola_1 Espresif S2 Saola 1 espressif https://do ========================= ============================== ========= ======================================================================================================== ====== GigaDevice -========== +---------- ================== ================== ========= ============================= ====== Board Name Family URL Note @@ -63,7 +68,7 @@ sipeed_longan_nano Sipeed Longan Nano gd32vf103 https://longan.sipeed.com/en/ ================== ================== ========= ============================= ====== Infineon -======== +-------- ============= ================= ======== ============================================================================= ====== Board Name Family URL Note @@ -73,7 +78,7 @@ xmc4700_relax XMC4700 relax kit xmc4000 https://www.infineon.com/cms/en/prod ============= ================= ======== ============================================================================= ====== Microchip -========= +--------- ========================= =================================== ========== ================================================================================= ====== Board Name Family URL Note @@ -107,7 +112,7 @@ sensorwatch_m0 SensorWatch saml2x http ========================= =================================== ========== ================================================================================= ====== MindMotion -========== +---------- ===================== ====================================== ======== =============================================================================================== ====== Board Name Family URL Note @@ -117,7 +122,7 @@ mm32f327x_pitaya_lite DshanMCU Pitaya Lite with MM32F3273G8P mm32 https:/ ===================== ====================================== ======== =============================================================================================== ====== NXP -=== +--- ================== ========================================= ============= ========================================================================================================================================================================= ====== Board Name Family URL Note @@ -165,7 +170,7 @@ mcxn947brk MCXN947 Breakout mcx n/ ================== ========================================= ============= ========================================================================================================================================================================= ====== Nordic Semiconductor -==================== +-------------------- =========================== ===================================== ======== ============================================================================== ====== Board Name Family URL Note @@ -183,7 +188,7 @@ pca10100 Nordic nRF52833 DK nrf ht =========================== ===================================== ======== ============================================================================== ====== Raspberry Pi -============ +------------ ================= ================= ============== ========================================================== ====== Board Name Family URL Note @@ -194,7 +199,7 @@ raspberrypi_zero2 Raspberry Zero2 broadcom_64bit https://www.raspberrypi.or ================= ================= ============== ========================================================== ====== Renesas -======= +------- ============== =========================== ======== ================================================================================================================================================================ ====== Board Name Family URL Note @@ -212,7 +217,7 @@ uno_r4 Arduino UNO R4 ra https://store-usa.arduino ============== =========================== ======== ================================================================================================================================================================ ====== STMicroelectronics -================== +------------------ =================== ================================= ======== ================================================================= ====== Board Name Family URL Note @@ -272,7 +277,7 @@ stm32wb55nucleo STM32 P-NUCLEO-WB55 stm32wb https://www.st =================== ================================= ======== ================================================================= ====== Sunxi -===== +----- ======= ================= ======== ========================================= ====== Board Name Family URL Note @@ -281,7 +286,7 @@ f1c100s Lctech Pi F1C200s f1c100s https://linux-sunxi.org/Lctech_Pi_F1C200s ======= ================= ======== ========================================= ====== Texas Instruments -================= +----------------- ================= ===================== ======== ========================================= ====== Board Name Family URL Note @@ -292,7 +297,7 @@ ek_tm4c123gxl TM4C123G LaunchPad tm4c https://www.ti.com/tool/EK-T ================= ===================== ======== ========================================= ====== Tomu -==== +---- ======= ====== ======== ========================= ====== Board Name Family URL Note @@ -301,7 +306,7 @@ fomu fomu fomu https://tomu.im/fomu.html ======= ====== ======== ========================= ====== WCH -=== +--- ================ ================ ======== ===================================================================== ====== Board Name Family URL Note diff --git a/docs/reference/getting_started.rst b/docs/reference/getting_started.rst index 671e9fb11..963420f7b 100644 --- a/docs/reference/getting_started.rst +++ b/docs/reference/getting_started.rst @@ -50,7 +50,7 @@ It is relatively simple to incorporate tinyusb to your project Examples -------- -For your convenience, TinyUSB contains a handful of examples for both host and device with/without RTOS to quickly test the functionality as well as demonstrate how API() should be used. Most examples will work on most of `the supported boards `_. Firstly we need to ``git clone`` if not already +For your convenience, TinyUSB contains a handful of examples for both host and device with/without RTOS to quickly test the functionality as well as demonstrate how API() should be used. Most examples will work on most of `the supported boards `_. Firstly we need to ``git clone`` if not already .. code-block:: diff --git a/docs/reference/index.rst b/docs/reference/index.rst index e9b033033..3a55503b7 100644 --- a/docs/reference/index.rst +++ b/docs/reference/index.rst @@ -80,7 +80,6 @@ Index :maxdepth: 2 getting_started - supported boards dependencies concurrency diff --git a/docs/reference/supported.rst b/docs/reference/supported.rst deleted file mode 100644 index cbd6c4786..000000000 --- a/docs/reference/supported.rst +++ /dev/null @@ -1,442 +0,0 @@ -***************** -Supported Devices -***************** - -Supported MCUs -============== - -+--------------+-----------------------------+--------+------+-----------+------------------------+-------------------+ -| Manufacturer | Family | Device | Host | Highspeed | Driver | Note | -+==============+=============================+========+======+===========+========================+===================+ -| Allwinner | F1C100s/F1C200s | ✔ | | ✔ | sunxi | musb variant | -+--------------+-----------------------------+--------+------+-----------+------------------------+-------------------+ -| Analog | MAX3421E | | ✔ | ✖ | max3421 | via SPI | -| +-----------------------------+--------+------+-----------+------------------------+-------------------+ -| | MAX32 650, 666, 690, | ✔ | | ✔ | musb | 1-dir ep | -| | MAX78002 | | | | | | -+--------------+-----------------------------+--------+------+-----------+------------------------+-------------------+ -| Brigetek | FT90x | ✔ | | ✔ | ft9xx | 1-dir ep | -+--------------+-----------------------------+--------+------+-----------+------------------------+-------------------+ -| Broadcom | BCM2711, BCM2837 | ✔ | | ✔ | dwc2 | | -+--------------+-----------------------------+--------+------+-----------+------------------------+-------------------+ -| Dialog | DA1469x | ✔ | ✖ | ✖ | da146xx | | -+--------------+-----------------------------+--------+------+-----------+------------------------+-------------------+ -| Espressif | S2, S3 | ✔ | ✔ | ✖ | dwc2 or esp32sx | | -| ESP32 +-----------------------------+--------+------+-----------+------------------------+-------------------+ -| | P4 | ✔ | ✔ | ✔ | dwc2 | | -+--------------+----+------------------------+--------+------+-----------+------------------------+-------------------+ -| GigaDevice | GD32VF103 | ✔ | | ✖ | dwc2 | | -+--------------+-----------------------------+--------+------+-----------+------------------------+-------------------+ -| Infineon | XMC4500 | ✔ | ✔ | ✖ | dwc2 | | -+--------------+-----+-----------------------+--------+------+-----------+------------------------+-------------------+ -| MicroChip | SAM | D11, D21, L21, L22 | ✔ | | ✖ | samd | | -| | +-----------------------+--------+------+-----------+------------------------+-------------------+ -| | | D51, E5x | ✔ | | ✖ | samd | | -| | +-----------------------+--------+------+-----------+------------------------+-------------------+ -| | | G55 | ✔ | | ✖ | samg | 1-dir ep | -| | +-----------------------+--------+------+-----------+------------------------+-------------------+ -| | | E70,S70,V70,V71 | ✔ | | ✔ | samx7x | 1-dir ep | -| +-----+-----------------------+--------+------+-----------+------------------------+-------------------+ -| | PIC | 24 | ✔ | | | pic | ci_fs variant | -| | +-----------------------+--------+------+-----------+------------------------+-------------------+ -| | | 32 mm, mk, mx | ✔ | | | pic | ci_fs variant | -| | +-----------------------+--------+------+-----------+------------------------+-------------------+ -| | | dsPIC33 | ✔ | | | pic | ci_fs variant | -| | +-----------------------+--------+------+-----------+------------------------+-------------------+ -| | | 32mz | ✔ | | | pic32mz | musb variant | -+--------------+-----+-----------------------+--------+------+-----------+------------------------+-------------------+ -| Mind Montion | mm32 | ✔ | | ✖ | mm32f327x_otg | ci_fs variant | -+--------------+-----+-----------------------+--------+------+-----------+------------------------+-------------------+ -| NordicSemi | nRF 52833, 52840, 5340 | ✔ | ✖ | ✖ | nrf5x | only ep8 is ISO | -+--------------+-----------------------------+--------+------+-----------+------------------------+-------------------+ -| Nuvoton | NUC120 | ✔ | ✖ | ✖ | nuc120 | | -| +-----------------------------+--------+------+-----------+------------------------+-------------------+ -| | NUC121/NUC125 | ✔ | ✖ | ✖ | nuc121 | | -| +-----------------------------+--------+------+-----------+------------------------+-------------------+ -| | NUC126 | ✔ | ✖ | ✖ | nuc121 | | -| +-----------------------------+--------+------+-----------+------------------------+-------------------+ -| | NUC505 | ✔ | | ✔ | nuc505 | | -+--------------+---------+-------------------+--------+------+-----------+------------------------+-------------------+ -| NXP | iMXRT | RT 10xx, 11xx | ✔ | ✔ | ✔ | ci_hs | | -| +---------+-------------------+--------+------+-----------+------------------------+-------------------+ -| | Kinetis | KL | ✔ | ⚠ | ✖ | ci_fs, khci | | -| | +-------------------+--------+------+-----------+------------------------+-------------------+ -| | | K32L2 | ✔ | | ✖ | khci | ci_fs variant | -| +---------+-------------------+--------+------+-----------+------------------------+-------------------+ -| | LPC | 11u, 13, 15 | ✔ | ✖ | ✖ | lpc_ip3511 | | -| | +-------------------+--------+------+-----------+------------------------+-------------------+ -| | | 17, 40 | ✔ | ⚠ | ✖ | lpc17_40 | | -| | +-------------------+--------+------+-----------+------------------------+-------------------+ -| | | 18, 43 | ✔ | ✔ | ✔ | ci_hs | | -| | +-------------------+--------+------+-----------+------------------------+-------------------+ -| | | 51u | ✔ | ✖ | ✖ | lpc_ip3511 | | -| | +-------------------+--------+------+-----------+------------------------+-------------------+ -| | | 54, 55 | ✔ | | ✔ | lpc_ip3511 | | -| +---------+-------------------+--------+------+-----------+------------------------+-------------------+ -| | MCX | N9, A15 | ✔ | | ✔ | ci_fs, ci_hs | | -+--------------+---------+-------------------+--------+------+-----------+------------------------+-------------------+ -| Raspberry Pi | RP2040, RP2350 | ✔ | ✔ | ✖ | rp2040, pio_usb | | -+--------------+-----+-----------------------+--------+------+-----------+------------------------+-------------------+ -| Renesas | RX | 63N, 65N, 72N | ✔ | ✔ | ✖ | rusb2 | | -| +-----+-----------------------+--------+------+-----------+------------------------+-------------------+ -| | RA | 4M1, 4M3, 6M1 | ✔ | ✔ | ✖ | rusb2 | | -| | +-----------------------+--------+------+-----------+------------------------+-------------------+ -| | | 6M5 | ✔ | ✔ | ✔ | rusb2 | | -+--------------+-----+-----------------------+--------+------+-----------+------------------------+-------------------+ -| Silabs | EFM32GG12 | ✔ | | ✖ | dwc2 | | -+--------------+-----------------------------+--------+------+-----------+------------------------+-------------------+ -| Sony | CXD56 | ✔ | ✖ | ✔ | cxd56 | | -+--------------+-----------------------------+--------+------+-----------+------------------------+-------------------+ -| ST STM32 | F0 | ✔ | ✖ | ✖ | stm32_fsdev | | -| +----+------------------------+--------+------+-----------+------------------------+-------------------+ -| | F1 | 102, 103 | ✔ | ✖ | ✖ | stm32_fsdev | | -| | +------------------------+--------+------+-----------+------------------------+-------------------+ -| | | 105, 107 | ✔ | ✔ | ✖ | dwc2 | | -| +----+------------------------+--------+------+-----------+------------------------+-------------------+ -| | F2, F4, F7, H7 | ✔ | ✔ | ✔ | dwc2 | | -| +-----------------------------+--------+------+-----------+------------------------+-------------------+ -| | F3 | ✔ | ✖ | ✖ | stm32_fsdev | | -| +-----------------------------+--------+------+-----------+------------------------+-------------------+ -| | C0, G0, H5 | ✔ | | ✖ | stm32_fsdev | | -| +-----------------------------+--------+------+-----------+------------------------+-------------------+ -| | G4 | ✔ | ✖ | ✖ | stm32_fsdev | | -| +-----------------------------+--------+------+-----------+------------------------+-------------------+ -| | L0, L1 | ✔ | ✖ | ✖ | stm32_fsdev | | -| +----+------------------------+--------+------+-----------+------------------------+-------------------+ -| | L4 | 4x2, 4x3 | ✔ | ✖ | ✖ | stm32_fsdev | | -| | +------------------------+--------+------+-----------+------------------------+-------------------+ -| | | 4x5, 4x6 | ✔ | ✔ | ✖ | dwc2 | | -| +----+------------------------+--------+------+-----------+------------------------+-------------------+ -| | L4+ | ✔ | ✔ | ✖ | dwc2 | | -| +-----------------------------+--------+------+-----------+------------------------+-------------------+ -| | L5 | ✔ | ✖ | ✖ | stm32_fsdev | | -| +----+------------------------+--------+------+-----------+------------------------+-------------------+ -| | U5 | 535, 545 | ✔ | | ✖ | stm32_fsdev | | -| | +------------------------+--------+------+-----------+------------------------+-------------------+ -| | | 575, 585 | ✔ | ✔ | ✖ | dwc2 | | -| | +------------------------+--------+------+-----------+------------------------+-------------------+ -| | | 59x,5Ax,5Fx,5Gx | ✔ | ✔ | ✔ | dwc2 | | -| +----+------------------------+--------+------+-----------+------------------------+-------------------+ -| | WBx5 | ✔ | ✖ | ✖ | stm32_fsdev | | -+--------------+-----------------------------+--------+------+-----------+------------------------+-------------------+ -| TI | MSP430 | ✔ | ✖ | ✖ | msp430x5xx | | -| +-----------------------------+--------+------+-----------+------------------------+-------------------+ -| | MSP432E4 | ✔ | | ✖ | musb | | -| +-----------------------------+--------+------+-----------+------------------------+-------------------+ -| | TM4C123 | ✔ | | ✖ | musb | | -+--------------+-----------------------------+--------+------+-----------+------------------------+-------------------+ -| ValentyUSB | eptri | ✔ | ✖ | ✖ | eptri | | -+--------------+-----------------------------+--------+------+-----------+------------------------+-------------------+ -| WCH | CH32F20x | ✔ | | ✔ | ch32_usbhs | | -| +-----------------------------+--------+------+-----------+------------------------+-------------------+ -| | CH32V20x | ✔ | | ✖ | stm32_fsdev/ch32_usbfs | | -| +-----------------------------+--------+------+-----------+------------------------+-------------------+ -| | CH32V307 | ✔ | | ✔ | ch32_usbfs/hs | | -+--------------+-----------------------------+--------+------+-----------+------------------------+-------------------+ - - -Table Legend ------------- - -========= ========================= -✔ Supported -⚠ Partial support -✖ Not supported by hardware -\[empty\] Unknown -========= ========================= - -Supported Boards -================ - -The board support code is only used for self-contained examples and testing. It is not used when TinyUSB is part of a larger project. It is responsible for getting the MCU started and the USB peripheral clocked with minimal of on-board devices - -- One LED : for status -- One Button : to get input from user -- One UART : optional for device, but required for host examples - -The following boards are supported (sorted alphabetically): - -Broadcom --------- - -- `Raspberry Pi CM4 `__ - -Dialog DA146xx --------------- - -- `DA14695 Development Kit – USB `__ -- `DA1469x Development Kit – Pro `__ - -Espressif ESP32-S2 ------------------- - -- `Adafruit Feather ESP32-S2 `__ -- `Adafruit Magtag 2.9" E-Ink WiFi Display `__ -- `Adafruit Metro ESP32-S2 `__ -- `ESP32-S2-Kaluga-1 `__ -- `ESP32-S2-Saola-1 `__ - -GigaDevice ----------- - -- `Sipeed Longan Nano `__ - -Infineon ---------- - -XMC4000 -^^^^^^^ - -- `XMC4500 Relax (Lite) Kit `__ - -MicroChip ---------- - -SAMD11 & SAMD21 -^^^^^^^^^^^^^^^ - -- `Adafruit Circuit Playground Express `__ -- `Adafruit Feather M0 Express `__ -- `Adafruit ItsyBitsy M0 Express `__ -- `Adafruit Metro M0 Express `__ -- `Great Scott Gadgets Cynthion `__ -- `Microchip SAMD11 Xplained Pro `__ -- `Microchip SAMD21 Xplained Pro `__ -- `Seeeduino Xiao `__ - -SAMD51 & SAME54 -^^^^^^^^^^^^^^^ - -- `Adafruit Feather M4 Express `__ -- `Adafruit ItsyBitsy M4 Express `__ -- `Adafruit PyBadge `__ -- `Adafruit PyPortal `__ -- `Adafruit Metro M4 Express `__ -- `D5035-01 `__ -- `Microchip SAME54 Xplained Pro `__ - -SAME7x -^^^^^^ - -- `Microchip SAME70 Xplained `_ -- `QMTECH ATSAME70N19 `_ - -SAMG -^^^^ - -- `Microchip SAMG55 Xplained Pro `__ - -SAML2x -^^^^^^ - -- `SAML21 Xplaind Pro `__ -- `SAML22 Feather `__ -- `Sensor Watch `__ - -Nordic nRF5x ------------- - -- `Adafruit Circuit Playground Bluefruit `__ -- `Adafruit CLUE `__ -- `Adafruit Feather nRF52840 Express `__ -- `Adafruit Feather nRF52840 Sense `__ -- `Adafruit ItsyBitsy nRF52840 Express `__ -- `Arduino Nano 33 BLE `__ -- `Arduino Nano 33 BLE Sense `__ -- `Maker Diary nRF52840 MDK Dongle `__ -- `Nordic nRF52840 Development Kit (aka pca10056) `__ -- `Nordic nRF52840 Dongle (aka pca10059) `__ -- `Nordic nRF52833 Development Kit (aka pca10100) `__ -- `Raytac MDBT50Q-RX Dongle `__ - -Nuvoton -------- - -- NuTiny SDK NUC120 -- `NuTiny NUC121S `__ -- `NuTiny NUC125S `__ -- `NuTiny NUC126V `__ -- `NuTiny SDK NUC505Y `__ - -NXP ---- - -iMX RT -^^^^^^ - -- `MIMX RT1010 Evaluation Kit `__ -- `MIMX RT1015 Evaluation Kit `__ -- `MIMX RT1020 Evaluation Kit `__ -- `MIMX RT1050 Evaluation Kit `__ -- `MIMX RT1060 Evaluation Kit `__ -- `MIMX RT1064 Evaluation Kit `__ -- `Teensy 4.0 Development Board `__ -- `Teensy 4.1 Development Board `__ - -Kinetis -^^^^^^^ - -- `Freedom FRDM-KL25Z `__ -- `Freedom FRDM-K32L2A4S `__ -- `Freedom FRDM-K32L2B3 `__ -- `KUIIC `__ - -LPC 11-13-15 -^^^^^^^^^^^^ - -- `LPCXpresso 11u37 `__ -- `LPCXpresso 11u68 `__ -- `LPCXpresso 1347 `__ -- `LPCXpresso 1549 `__ - -LPC 17-40 -^^^^^^^^^ - -- `ARM mbed LPC1768 `__ -- `Embedded Artists LPC4088 Quick Start board `__ -- `LPCXpresso 1769 `__ - -LPC 18-43 -^^^^^^^^^ - -- `Embedded Artists LPC4357 Developer Kit `__ -- `Keil MCB1800 Evaluation Board `__ -- `LPCXpresso18S37 Development Board `__ - -LPC 51 -^^^^^^ - -- `LPCXpresso 51U68 `__ - -LPC 54 -^^^^^^ - -- `LPCXpresso 54114 `__ - -LPC55 -^^^^^ - -- `Double M33 Express `__ -- `LPCXpresso 55s28 EVK `__ -- `LPCXpresso 55s69 EVK `__ -- `MCU-Link `__ - -Renesas -------- - -RA -^^ - -- `Evaluation Kit for RA4M1 `__ -- `Evaluation Kit for RA4M3 `__ - -RX -^^ - -- `GR-CITRUS `__ -- `Renesas RX65N Target Board `__ - -Raspberry Pi RP2040 -------------------- - -- `Adafruit Feather RP2040 `__ -- `Adafruit ItsyBitsy RP2040 `__ -- `Adafruit QT Py RP2040 `__ -- `Raspberry Pi Pico `__ - -Silabs ------- - -- `EFM32GG12 Thunderboard Kit (SLTB009A) `__ - -Sony ----- - -- `Sony Spresense CXD5602 `__ - -ST STM32 --------- - -F0 -^^ -- `STM32 F070rb Nucleo `__ -- `STM32 F072 Evaluation `__ -- `STM32 F072rb Discovery `__ - -F1 -^^ -- `STM32 F103c8 Blue Pill `__ -- `STM32 F103rc Mini v2.0 `__ - -F2 -^^ -- `STM32 F207zg Nucleo `__ - -F3 -^^ -- `STM32 F303vc Discovery `__ - -F4 -^^ -- `Adafruit Feather STM32F405 `__ -- `Micro Python PyBoard v1.1 `__ -- `STM32 F401cc Black Pill `__ -- `STM32 F407vg Discovery `__ -- `STM32 F411ce Black Pill `__ -- `STM32 F411ve Discovery `__ -- `STM32 F412zg Discovery `__ -- `STM32 F412zg Nucleo `__ -- `STM32 F439zi Nucleo `__ - -F7 -^^ - -- `STLink-V3 Mini `__ -- `STM32 F723e Discovery `__ -- `STM32 F746zg Nucleo `__ -- `STM32 F746g Discovery `__ -- `STM32 F767zi Nucleo `__ -- `STM32 F769i Discovery `__ - -H7 -^^ -- `STM32 H743zi Nucleo `__ -- `STM32 H743i Evaluation `__ -- `STM32 H745i Discovery `__ -- `Waveshare OpenH743I-C `__ - -G4 -^^ -- `STM32 G474RE Nucleo `__ - -L0 -^^ -- `STM32 L035c8 Discovery `__ - -L4 -^^ -- `STM32 L476vg Discovery `__ -- `STM32 L4P5zg Nucleo `__ -- `STM32 L4R5zi Nucleo `__ - -WB -^^ -- `STM32 WB55 Nucleo `__ - -TI --- - -- `MSP430F5529 USB LaunchPad Evaluation Kit `__ -- `MSP-EXP432E401Y LaunchPad Evaluation Kit `__ -- `TM4C123GXL LaunchPad Evaluation Kit `__ - -Tomu ----- - -- `Fomu `__ - -WCH ---- - -- `CH32V307V-R1-1v0 `__ -- `CH32F205R-R0-1v0 `__ diff --git a/hw/bsp/stm32h7/boards/stm32h743eval/board.h b/hw/bsp/stm32h7/boards/stm32h743eval/board.h index 821c799d7..334876e51 100644 --- a/hw/bsp/stm32h7/boards/stm32h743eval/board.h +++ b/hw/bsp/stm32h7/boards/stm32h743eval/board.h @@ -32,6 +32,7 @@ #ifndef BOARD_H_ #define BOARD_H_ +#ifdef __cplusplus extern "C" { #endif diff --git a/tools/gen_doc.py b/tools/gen_doc.py index 318ff8089..ab07bc116 100755 --- a/tools/gen_doc.py +++ b/tools/gen_doc.py @@ -92,13 +92,18 @@ def gen_boards_doc(): Supported Boards **************** -Following boards are supported and can be used to run stock examples +The board support code is only used for self-contained examples and testing. It is not used when TinyUSB is part of a larger project. +It is responsible for getting the MCU started and the USB peripheral clocked with minimal of on-board devices -""" +- One LED : for status +- One Button : to get input from user +- One UART : needed for logging with LOGGER=uart, maybe required for host/dual examples + +Following boards are supported""" f.write(title) for manuf, boards in sorted(vendor_data.items()): f.write(f"\n\n{manuf}\n") - f.write(f"{'=' * len(manuf)}\n\n") + f.write(f"{'-' * len(manuf)}\n\n") df = pd.DataFrame.from_dict(boards, orient='index', columns=['Name', 'Family', 'URL', 'Note']) df = df.rename_axis("Board") f.write(tabulate(df, headers="keys", tablefmt='rst')) -- cgit v1.3.1 From 6d1ed1ed8658ef20f72c52666d68d88024265e9f Mon Sep 17 00:00:00 2001 From: HiFiPhile Date: Wed, 22 Jan 2025 22:35:49 +0100 Subject: Update deps. Signed-off-by: HiFiPhile --- docs/reference/dependencies.rst | 136 ++++++++++++++++++++-------------------- tools/get_deps.py | 8 ++- 2 files changed, 76 insertions(+), 68 deletions(-) (limited to 'tools') diff --git a/docs/reference/dependencies.rst b/docs/reference/dependencies.rst index e124466da..41662c749 100644 --- a/docs/reference/dependencies.rst +++ b/docs/reference/dependencies.rst @@ -4,70 +4,72 @@ Dependencies MCU low-level peripheral driver and external libraries for building TinyUSB examples -======================================== ============================================================== ======================================== ==================================================================================================================================================================================================================================================================================================================================== -Local Path Repo Commit Required by -======================================== ============================================================== ======================================== ==================================================================================================================================================================================================================================================================================================================================== -hw/mcu/allwinner https://github.com/hathach/allwinner_driver.git 8e5e89e8e132c0fd90e72d5422e5d3d68232b756 fc100s -hw/mcu/analog/max32 https://github.com/analogdevicesinc/msdk.git b20b398d3e5e2007594e54a74ba3d2a2e50ddd75 max32650 max32666 max32690 max78002 -hw/mcu/bridgetek/ft9xx/ft90x-sdk https://github.com/BRTSG-FOSS/ft90x-sdk.git 91060164afe239fcb394122e8bf9eb24d3194eb1 brtmm90x -hw/mcu/broadcom https://github.com/adafruit/broadcom-peripherals.git 08370086080759ed54ac1136d62d2ad24c6fa267 broadcom_32bit broadcom_64bit -hw/mcu/gd/nuclei-sdk https://github.com/Nuclei-Software/nuclei-sdk.git 7eb7bfa9ea4fbeacfafe1d5f77d5a0e6ed3922e7 gd32vf103 -hw/mcu/infineon/mtb-xmclib-cat3 https://github.com/Infineon/mtb-xmclib-cat3.git daf5500d03cba23e68c2f241c30af79cd9d63880 xmc4000 -hw/mcu/microchip https://github.com/hathach/microchip_driver.git 9e8b37e307d8404033bb881623a113931e1edf27 sam3x samd11 samd21 samd51 samd5x_e5x same5x same7x saml2x samg -hw/mcu/mindmotion/mm32sdk https://github.com/hathach/mm32sdk.git b93e856211060ae825216c6a1d6aa347ec758843 mm32 -hw/mcu/nordic/nrfx https://github.com/NordicSemiconductor/nrfx.git 7c47cc0a56ce44658e6da2458e86cd8783ccc4a2 nrf -hw/mcu/nuvoton https://github.com/majbthrd/nuc_driver.git 2204191ec76283371419fbcec207da02e1bc22fa nuc -hw/mcu/nxp/lpcopen https://github.com/hathach/nxp_lpcopen.git b41cf930e65c734d8ec6de04f1d57d46787c76ae lpc11 lpc13 lpc15 lpc17 lpc18 lpc40 lpc43 -hw/mcu/nxp/mcux-sdk https://github.com/hathach/mcux-sdk.git 144f1eb7ea8c06512e12f12b27383601c0272410 kinetis_k kinetis_k32l2 kinetis_kl lpc51 lpc54 lpc55 mcx imxrt -hw/mcu/raspberry_pi/Pico-PIO-USB https://github.com/sekigon-gonnoc/Pico-PIO-USB.git fe9133fc513b82cc3dc62c67cb51f2339cf29ef7 rp2040 -hw/mcu/renesas/fsp https://github.com/renesas/fsp.git edcc97d684b6f716728a60d7a6fea049d9870bd6 ra -hw/mcu/renesas/rx https://github.com/kkitayam/rx_device.git 706b4e0cf485605c32351e2f90f5698267996023 rx -hw/mcu/silabs/cmsis-dfp-efm32gg12b https://github.com/cmsis-packs/cmsis-dfp-efm32gg12b.git f1c31b7887669cb230b3ea63f9b56769078960bc efm32 -hw/mcu/sony/cxd56/spresense-exported-sdk https://github.com/sonydevworld/spresense-exported-sdk.git 2ec2a1538362696118dc3fdf56f33dacaf8f4067 spresense -hw/mcu/st/cmsis_device_c0 https://github.com/STMicroelectronics/cmsis_device_c0.git fb56b1b70c73b74eacda2a4bcc36886444364ab3 stm32c0 -hw/mcu/st/cmsis_device_f0 https://github.com/STMicroelectronics/cmsis_device_f0.git 2fc25ee22264bc27034358be0bd400b893ef837e stm32f0 -hw/mcu/st/cmsis_device_f1 https://github.com/STMicroelectronics/cmsis_device_f1.git 6601104a6397299b7304fd5bcd9a491f56cb23a6 stm32f1 -hw/mcu/st/cmsis_device_f2 https://github.com/STMicroelectronics/cmsis_device_f2.git 182fcb3681ce116816feb41b7764f1b019ce796f stm32f2 -hw/mcu/st/cmsis_device_f3 https://github.com/STMicroelectronics/cmsis_device_f3.git 5e4ee5ed7a7b6c85176bb70a9fd3c72d6eb99f1b stm32f3 -hw/mcu/st/cmsis_device_f4 https://github.com/STMicroelectronics/cmsis_device_f4.git 2615e866fa48fe1ff1af9e31c348813f2b19e7ec stm32f4 -hw/mcu/st/cmsis_device_f7 https://github.com/STMicroelectronics/cmsis_device_f7.git 25b0463439303b7a38f0d27b161f7d2f3c096e79 stm32f7 -hw/mcu/st/cmsis_device_g0 https://github.com/STMicroelectronics/cmsis_device_g0.git 3a23e1224417f3f2d00300ecd620495e363f2094 stm32g0 -hw/mcu/st/cmsis_device_g4 https://github.com/STMicroelectronics/cmsis_device_g4.git ce822adb1dc552b3aedd13621edbc7fdae124878 stm32g4 -hw/mcu/st/cmsis_device_h5 https://github.com/STMicroelectronics/cmsis_device_h5.git cd2d1d579743de57b88ccaf61a968b9c05848ffc stm32h5 -hw/mcu/st/cmsis_device_h7 https://github.com/STMicroelectronics/cmsis_device_h7.git 60dc2c913203dc8629dc233d4384dcc41c91e77f stm32h7 -hw/mcu/st/cmsis_device_l0 https://github.com/STMicroelectronics/cmsis_device_l0.git 69cd5999fd40ae6e546d4905b21635c6ca1bcb92 stm32l0 -hw/mcu/st/cmsis_device_l1 https://github.com/STMicroelectronics/cmsis_device_l1.git 7f16ec0a1c4c063f84160b4cc6bf88ad554a823e stm32l1 -hw/mcu/st/cmsis_device_l4 https://github.com/STMicroelectronics/cmsis_device_l4.git 6ca7312fa6a5a460b5a5a63d66da527fdd8359a6 stm32l4 -hw/mcu/st/cmsis_device_l5 https://github.com/STMicroelectronics/cmsis_device_l5.git d922865fc0326a102c26211c44b8e42f52c1e53d stm32l5 -hw/mcu/st/cmsis_device_u5 https://github.com/STMicroelectronics/cmsis_device_u5.git 5ad9797c54ec3e55eff770fc9b3cd4a1aefc1309 stm32u5 -hw/mcu/st/cmsis_device_wb https://github.com/STMicroelectronics/cmsis_device_wb.git 9c5d1920dd9fabbe2548e10561d63db829bb744f stm32wb -hw/mcu/st/stm32-mfxstm32l152 https://github.com/STMicroelectronics/stm32-mfxstm32l152.git 7f4389efee9c6a655b55e5df3fceef5586b35f9b stm32h7 -hw/mcu/st/stm32c0xx_hal_driver https://github.com/STMicroelectronics/stm32c0xx_hal_driver.git 41253e2f1d7ae4a4d0c379cf63f5bcf71fcf8eb3 stm32c0 -hw/mcu/st/stm32f0xx_hal_driver https://github.com/STMicroelectronics/stm32f0xx_hal_driver.git 0e95cd88657030f640a11e690a8a5186c7712ea5 stm32f0 -hw/mcu/st/stm32f1xx_hal_driver https://github.com/STMicroelectronics/stm32f1xx_hal_driver.git 1dd9d3662fb7eb2a7f7d3bc0a4c1dc7537915a29 stm32f1 -hw/mcu/st/stm32f2xx_hal_driver https://github.com/STMicroelectronics/stm32f2xx_hal_driver.git c75ace9b908a9aca631193ebf2466963b8ea33d0 stm32f2 -hw/mcu/st/stm32f3xx_hal_driver https://github.com/STMicroelectronics/stm32f3xx_hal_driver.git 1761b6207318ede021706e75aae78f452d72b6fa stm32f3 -hw/mcu/st/stm32f4xx_hal_driver https://github.com/STMicroelectronics/stm32f4xx_hal_driver.git 04e99fbdabd00ab8f370f377c66b0a4570365b58 stm32f4 -hw/mcu/st/stm32f7xx_hal_driver https://github.com/STMicroelectronics/stm32f7xx_hal_driver.git f7ffdf6bf72110e58b42c632b0a051df5997e4ee stm32f7 -hw/mcu/st/stm32g0xx_hal_driver https://github.com/STMicroelectronics/stm32g0xx_hal_driver.git e911b12c7f67084d7f6b76157a4c0d4e2ec3779c stm32g0 -hw/mcu/st/stm32g4xx_hal_driver https://github.com/STMicroelectronics/stm32g4xx_hal_driver.git 8b4518417706d42eef5c14e56a650005abf478a8 stm32g4 -hw/mcu/st/stm32h5xx_hal_driver https://github.com/STMicroelectronics/stm32h5xx_hal_driver.git 2cf77de584196d619cec1b4586c3b9e2820a254e stm32h5 -hw/mcu/st/stm32h7xx_hal_driver https://github.com/STMicroelectronics/stm32h7xx_hal_driver.git d8461b980b59b1625207d8c4f2ce0a9c2a7a3b04 stm32h7 -hw/mcu/st/stm32l0xx_hal_driver https://github.com/STMicroelectronics/stm32l0xx_hal_driver.git fbdacaf6f8c82a4e1eb9bd74ba650b491e97e17b stm32l0 -hw/mcu/st/stm32l1xx_hal_driver https://github.com/STMicroelectronics/stm32l1xx_hal_driver.git 44efc446fa69ed8344e7fd966e68ed11043b35d9 stm32l1 -hw/mcu/st/stm32l4xx_hal_driver https://github.com/STMicroelectronics/stm32l4xx_hal_driver.git aee3d5bf283ae5df87532b781bdd01b7caf256fc stm32l4 -hw/mcu/st/stm32l5xx_hal_driver https://github.com/STMicroelectronics/stm32l5xx_hal_driver.git 675c32a75df37f39d50d61f51cb0dcf53f07e1cb stm32l5 -hw/mcu/st/stm32u5xx_hal_driver https://github.com/STMicroelectronics/stm32u5xx_hal_driver.git 4d93097a67928e9377e655ddd14622adc31b9770 stm32u5 -hw/mcu/st/stm32wbxx_hal_driver https://github.com/STMicroelectronics/stm32wbxx_hal_driver.git 2c5f06638be516c1b772f768456ba637f077bac8 stm32wb -hw/mcu/ti https://github.com/hathach/ti_driver.git 143ed6cc20a7615d042b03b21e070197d473e6e5 msp430 msp432e4 tm4c -hw/mcu/wch/ch32f20x https://github.com/openwch/ch32f20x.git 77c4095087e5ed2c548ec9058e655d0b8757663b ch32f20x -hw/mcu/wch/ch32v103 https://github.com/openwch/ch32v103.git 7578cae0b21f86dd053a1f781b2fc6ab99d0ec17 ch32v10x -hw/mcu/wch/ch32v20x https://github.com/openwch/ch32v20x.git c4c38f507e258a4e69b059ccc2dc27dde33cea1b ch32v20x -hw/mcu/wch/ch32v307 https://github.com/openwch/ch32v307.git 184f21b852cb95eed58e86e901837bc9fff68775 ch32v307 -lib/CMSIS_5 https://github.com/ARM-software/CMSIS_5.git 2b7495b8535bdcb306dac29b9ded4cfb679d7e5c imxrt kinetis_k32l2 kinetis_kl lpc51 lpc54 lpc55 mcx mm32 msp432e4 nrf saml2x lpc11 lpc13 lpc15 lpc17 lpc18 lpc40 lpc43 stm32c0 stm32f0 stm32f1 stm32f2 stm32f3 stm32f4 stm32f7 stm32g0 stm32g4 stm32h5 stm32h7 stm32l0 stm32l1 stm32l4 stm32l5 stm32u5 stm32wb sam3x samd11 samd21 samd51 samd5x_e5x same5x same7x saml2x samg tm4c -lib/CMSIS_6 https://github.com/ARM-software/CMSIS_6.git b0bbb0423b278ca632cfe1474eb227961d835fd2 ra -lib/FreeRTOS-Kernel https://github.com/FreeRTOS/FreeRTOS-Kernel.git cc0e0707c0c748713485b870bb980852b210877f all -lib/lwip https://github.com/lwip-tcpip/lwip.git 159e31b689577dbf69cf0683bbaffbd71fa5ee10 all -lib/sct_neopixel https://github.com/gsteiert/sct_neopixel.git e73e04ca63495672d955f9268e003cffe168fcd8 lpc55 -tools/uf2 https://github.com/microsoft/uf2.git c594542b2faa01cc33a2b97c9fbebc38549df80a all -======================================== ============================================================== ======================================== ==================================================================================================================================================================================================================================================================================================================================== +======================================== ============================================================== ======================================== ==================================================================================================================================================================================================================================================================================================================================== +Local Path Repo Commit Required by +======================================== ============================================================== ======================================== ==================================================================================================================================================================================================================================================================================================================================== +hw/mcu/allwinner https://github.com/hathach/allwinner_driver.git 8e5e89e8e132c0fd90e72d5422e5d3d68232b756 fc100s +hw/mcu/analog/max32 https://github.com/analogdevicesinc/msdk.git b20b398d3e5e2007594e54a74ba3d2a2e50ddd75 max32650 max32666 max32690 max78002 +hw/mcu/bridgetek/ft9xx/ft90x-sdk https://github.com/BRTSG-FOSS/ft90x-sdk.git 91060164afe239fcb394122e8bf9eb24d3194eb1 brtmm90x +hw/mcu/broadcom https://github.com/adafruit/broadcom-peripherals.git 08370086080759ed54ac1136d62d2ad24c6fa267 broadcom_32bit broadcom_64bit +hw/mcu/gd/nuclei-sdk https://github.com/Nuclei-Software/nuclei-sdk.git 7eb7bfa9ea4fbeacfafe1d5f77d5a0e6ed3922e7 gd32vf103 +hw/mcu/infineon/mtb-xmclib-cat3 https://github.com/Infineon/mtb-xmclib-cat3.git daf5500d03cba23e68c2f241c30af79cd9d63880 xmc4000 +hw/mcu/microchip https://github.com/hathach/microchip_driver.git 9e8b37e307d8404033bb881623a113931e1edf27 sam3x samd11 samd21 samd51 samd5x_e5x same5x same7x saml2x samg +hw/mcu/mindmotion/mm32sdk https://github.com/hathach/mm32sdk.git b93e856211060ae825216c6a1d6aa347ec758843 mm32 +hw/mcu/nordic/nrfx https://github.com/NordicSemiconductor/nrfx.git 7c47cc0a56ce44658e6da2458e86cd8783ccc4a2 nrf +hw/mcu/nuvoton https://github.com/majbthrd/nuc_driver.git 2204191ec76283371419fbcec207da02e1bc22fa nuc +hw/mcu/nxp/lpcopen https://github.com/hathach/nxp_lpcopen.git b41cf930e65c734d8ec6de04f1d57d46787c76ae lpc11 lpc13 lpc15 lpc17 lpc18 lpc40 lpc43 +hw/mcu/nxp/mcux-sdk https://github.com/hathach/mcux-sdk.git 144f1eb7ea8c06512e12f12b27383601c0272410 kinetis_k kinetis_k32l2 kinetis_kl lpc51 lpc54 lpc55 mcx imxrt +hw/mcu/raspberry_pi/Pico-PIO-USB https://github.com/sekigon-gonnoc/Pico-PIO-USB.git fe9133fc513b82cc3dc62c67cb51f2339cf29ef7 rp2040 +hw/mcu/renesas/fsp https://github.com/renesas/fsp.git edcc97d684b6f716728a60d7a6fea049d9870bd6 ra +hw/mcu/renesas/rx https://github.com/kkitayam/rx_device.git 706b4e0cf485605c32351e2f90f5698267996023 rx +hw/mcu/silabs/cmsis-dfp-efm32gg12b https://github.com/cmsis-packs/cmsis-dfp-efm32gg12b.git f1c31b7887669cb230b3ea63f9b56769078960bc efm32 +hw/mcu/sony/cxd56/spresense-exported-sdk https://github.com/sonydevworld/spresense-exported-sdk.git 2ec2a1538362696118dc3fdf56f33dacaf8f4067 spresense +hw/mcu/st/cmsis_device_c0 https://github.com/STMicroelectronics/cmsis_device_c0.git fb56b1b70c73b74eacda2a4bcc36886444364ab3 stm32c0 +hw/mcu/st/cmsis_device_f0 https://github.com/STMicroelectronics/cmsis_device_f0.git 2fc25ee22264bc27034358be0bd400b893ef837e stm32f0 +hw/mcu/st/cmsis_device_f1 https://github.com/STMicroelectronics/cmsis_device_f1.git 6601104a6397299b7304fd5bcd9a491f56cb23a6 stm32f1 +hw/mcu/st/cmsis_device_f2 https://github.com/STMicroelectronics/cmsis_device_f2.git 182fcb3681ce116816feb41b7764f1b019ce796f stm32f2 +hw/mcu/st/cmsis_device_f3 https://github.com/STMicroelectronics/cmsis_device_f3.git 5e4ee5ed7a7b6c85176bb70a9fd3c72d6eb99f1b stm32f3 +hw/mcu/st/cmsis_device_f4 https://github.com/STMicroelectronics/cmsis_device_f4.git 2615e866fa48fe1ff1af9e31c348813f2b19e7ec stm32f4 +hw/mcu/st/cmsis_device_f7 https://github.com/STMicroelectronics/cmsis_device_f7.git 25b0463439303b7a38f0d27b161f7d2f3c096e79 stm32f7 +hw/mcu/st/cmsis_device_g0 https://github.com/STMicroelectronics/cmsis_device_g0.git 3a23e1224417f3f2d00300ecd620495e363f2094 stm32g0 +hw/mcu/st/cmsis_device_g4 https://github.com/STMicroelectronics/cmsis_device_g4.git ce822adb1dc552b3aedd13621edbc7fdae124878 stm32g4 +hw/mcu/st/cmsis_device_h5 https://github.com/STMicroelectronics/cmsis_device_h5.git cd2d1d579743de57b88ccaf61a968b9c05848ffc stm32h5 +hw/mcu/st/cmsis_device_h7 https://github.com/STMicroelectronics/cmsis_device_h7.git 60dc2c913203dc8629dc233d4384dcc41c91e77f stm32h7 +hw/mcu/st/cmsis_device_h7rs https://github.com/STMicroelectronics/cmsis_device_h7rs.git 832649d1fd09bd901e9f68e979522e5c209ebf20 stm32h7rs +hw/mcu/st/cmsis_device_l0 https://github.com/STMicroelectronics/cmsis_device_l0.git 69cd5999fd40ae6e546d4905b21635c6ca1bcb92 stm32l0 +hw/mcu/st/cmsis_device_l1 https://github.com/STMicroelectronics/cmsis_device_l1.git 7f16ec0a1c4c063f84160b4cc6bf88ad554a823e stm32l1 +hw/mcu/st/cmsis_device_l4 https://github.com/STMicroelectronics/cmsis_device_l4.git 6ca7312fa6a5a460b5a5a63d66da527fdd8359a6 stm32l4 +hw/mcu/st/cmsis_device_l5 https://github.com/STMicroelectronics/cmsis_device_l5.git d922865fc0326a102c26211c44b8e42f52c1e53d stm32l5 +hw/mcu/st/cmsis_device_u5 https://github.com/STMicroelectronics/cmsis_device_u5.git 5ad9797c54ec3e55eff770fc9b3cd4a1aefc1309 stm32u5 +hw/mcu/st/cmsis_device_wb https://github.com/STMicroelectronics/cmsis_device_wb.git 9c5d1920dd9fabbe2548e10561d63db829bb744f stm32wb +hw/mcu/st/stm32-mfxstm32l152 https://github.com/STMicroelectronics/stm32-mfxstm32l152.git 7f4389efee9c6a655b55e5df3fceef5586b35f9b stm32h7 +hw/mcu/st/stm32c0xx_hal_driver https://github.com/STMicroelectronics/stm32c0xx_hal_driver.git 41253e2f1d7ae4a4d0c379cf63f5bcf71fcf8eb3 stm32c0 +hw/mcu/st/stm32f0xx_hal_driver https://github.com/STMicroelectronics/stm32f0xx_hal_driver.git 0e95cd88657030f640a11e690a8a5186c7712ea5 stm32f0 +hw/mcu/st/stm32f1xx_hal_driver https://github.com/STMicroelectronics/stm32f1xx_hal_driver.git 1dd9d3662fb7eb2a7f7d3bc0a4c1dc7537915a29 stm32f1 +hw/mcu/st/stm32f2xx_hal_driver https://github.com/STMicroelectronics/stm32f2xx_hal_driver.git c75ace9b908a9aca631193ebf2466963b8ea33d0 stm32f2 +hw/mcu/st/stm32f3xx_hal_driver https://github.com/STMicroelectronics/stm32f3xx_hal_driver.git 1761b6207318ede021706e75aae78f452d72b6fa stm32f3 +hw/mcu/st/stm32f4xx_hal_driver https://github.com/STMicroelectronics/stm32f4xx_hal_driver.git 04e99fbdabd00ab8f370f377c66b0a4570365b58 stm32f4 +hw/mcu/st/stm32f7xx_hal_driver https://github.com/STMicroelectronics/stm32f7xx_hal_driver.git f7ffdf6bf72110e58b42c632b0a051df5997e4ee stm32f7 +hw/mcu/st/stm32g0xx_hal_driver https://github.com/STMicroelectronics/stm32g0xx_hal_driver.git e911b12c7f67084d7f6b76157a4c0d4e2ec3779c stm32g0 +hw/mcu/st/stm32g4xx_hal_driver https://github.com/STMicroelectronics/stm32g4xx_hal_driver.git 8b4518417706d42eef5c14e56a650005abf478a8 stm32g4 +hw/mcu/st/stm32h5xx_hal_driver https://github.com/STMicroelectronics/stm32h5xx_hal_driver.git 2cf77de584196d619cec1b4586c3b9e2820a254e stm32h5 +hw/mcu/st/stm32h7xx_hal_driver https://github.com/STMicroelectronics/stm32h7xx_hal_driver.git d8461b980b59b1625207d8c4f2ce0a9c2a7a3b04 stm32h7 +hw/mcu/st/stm32h7rsxx_hal_driver https://github.com/STMicroelectronics/stm32h7rsxx_hal_driver.git 7ca2e07ca21bc66b53654e845b4c85c884343b60 stm32h7rs +hw/mcu/st/stm32l0xx_hal_driver https://github.com/STMicroelectronics/stm32l0xx_hal_driver.git fbdacaf6f8c82a4e1eb9bd74ba650b491e97e17b stm32l0 +hw/mcu/st/stm32l1xx_hal_driver https://github.com/STMicroelectronics/stm32l1xx_hal_driver.git 44efc446fa69ed8344e7fd966e68ed11043b35d9 stm32l1 +hw/mcu/st/stm32l4xx_hal_driver https://github.com/STMicroelectronics/stm32l4xx_hal_driver.git aee3d5bf283ae5df87532b781bdd01b7caf256fc stm32l4 +hw/mcu/st/stm32l5xx_hal_driver https://github.com/STMicroelectronics/stm32l5xx_hal_driver.git 675c32a75df37f39d50d61f51cb0dcf53f07e1cb stm32l5 +hw/mcu/st/stm32u5xx_hal_driver https://github.com/STMicroelectronics/stm32u5xx_hal_driver.git 4d93097a67928e9377e655ddd14622adc31b9770 stm32u5 +hw/mcu/st/stm32wbxx_hal_driver https://github.com/STMicroelectronics/stm32wbxx_hal_driver.git 2c5f06638be516c1b772f768456ba637f077bac8 stm32wb +hw/mcu/ti https://github.com/hathach/ti_driver.git 143ed6cc20a7615d042b03b21e070197d473e6e5 msp430 msp432e4 tm4c +hw/mcu/wch/ch32f20x https://github.com/openwch/ch32f20x.git 77c4095087e5ed2c548ec9058e655d0b8757663b ch32f20x +hw/mcu/wch/ch32v103 https://github.com/openwch/ch32v103.git 7578cae0b21f86dd053a1f781b2fc6ab99d0ec17 ch32v10x +hw/mcu/wch/ch32v20x https://github.com/openwch/ch32v20x.git c4c38f507e258a4e69b059ccc2dc27dde33cea1b ch32v20x +hw/mcu/wch/ch32v307 https://github.com/openwch/ch32v307.git 184f21b852cb95eed58e86e901837bc9fff68775 ch32v307 +lib/CMSIS_5 https://github.com/ARM-software/CMSIS_5.git 2b7495b8535bdcb306dac29b9ded4cfb679d7e5c imxrt kinetis_k32l2 kinetis_kl lpc51 lpc54 lpc55 mcx mm32 msp432e4 nrf saml2x lpc11 lpc13 lpc15 lpc17 lpc18 lpc40 lpc43 stm32c0 stm32f0 stm32f1 stm32f2 stm32f3 stm32f4 stm32f7 stm32g0 stm32g4 stm32h5 stm32h7 stm32h7rs stm32l0 stm32l1 stm32l4 stm32l5 stm32u5 stm32wb sam3x samd11 samd21 samd51 samd5x_e5x same5x same7x saml2x samg tm4c +lib/CMSIS_6 https://github.com/ARM-software/CMSIS_6.git b0bbb0423b278ca632cfe1474eb227961d835fd2 ra +lib/FreeRTOS-Kernel https://github.com/FreeRTOS/FreeRTOS-Kernel.git cc0e0707c0c748713485b870bb980852b210877f all +lib/lwip https://github.com/lwip-tcpip/lwip.git 159e31b689577dbf69cf0683bbaffbd71fa5ee10 all +lib/sct_neopixel https://github.com/gsteiert/sct_neopixel.git e73e04ca63495672d955f9268e003cffe168fcd8 lpc55 +tools/uf2 https://github.com/microsoft/uf2.git c594542b2faa01cc33a2b97c9fbebc38549df80a all +======================================== ============================================================== ======================================== ==================================================================================================================================================================================================================================================================================================================================== diff --git a/tools/get_deps.py b/tools/get_deps.py index c8459c1f1..0b49dfd72 100755 --- a/tools/get_deps.py +++ b/tools/get_deps.py @@ -103,6 +103,9 @@ deps_optional = { 'hw/mcu/st/cmsis_device_h7': ['https://github.com/STMicroelectronics/cmsis_device_h7.git', '60dc2c913203dc8629dc233d4384dcc41c91e77f', 'stm32h7'], + 'hw/mcu/st/cmsis_device_h7rs': ['https://github.com/STMicroelectronics/cmsis_device_h7rs.git', + '832649d1fd09bd901e9f68e979522e5c209ebf20', + 'stm32h7rs'], 'hw/mcu/st/cmsis_device_h5': ['https://github.com/STMicroelectronics/cmsis_device_h5.git', 'cd2d1d579743de57b88ccaf61a968b9c05848ffc', 'stm32h5'], @@ -157,6 +160,9 @@ deps_optional = { 'hw/mcu/st/stm32h7xx_hal_driver': ['https://github.com/STMicroelectronics/stm32h7xx_hal_driver.git', 'd8461b980b59b1625207d8c4f2ce0a9c2a7a3b04', 'stm32h7'], + 'hw/mcu/st/stm32h7rsxx_hal_driver': ['https://github.com/STMicroelectronics/stm32h7rsxx-hal-driver.git', + '7ca2e07ca21bc66b53654e845b4c85c884343b60', + 'stm32h7rs'], 'hw/mcu/st/stm32h5xx_hal_driver': ['https://github.com/STMicroelectronics/stm32h5xx_hal_driver.git', '2cf77de584196d619cec1b4586c3b9e2820a254e', 'stm32h5'], @@ -198,7 +204,7 @@ deps_optional = { 'imxrt kinetis_k32l2 kinetis_kl lpc51 lpc54 lpc55 mcx mm32 msp432e4 nrf saml2x ' 'lpc11 lpc13 lpc15 lpc17 lpc18 lpc40 lpc43 ' 'stm32c0 stm32f0 stm32f1 stm32f2 stm32f3 stm32f4 stm32f7 stm32g0 stm32g4 stm32h5 ' - 'stm32h7 stm32l0 stm32l1 stm32l4 stm32l5 stm32u5 stm32wb ' + 'stm32h7 stm32h7rs stm32l0 stm32l1 stm32l4 stm32l5 stm32u5 stm32wb ' 'sam3x samd11 samd21 samd51 samd5x_e5x same5x same7x saml2x samg ' 'tm4c '], 'lib/CMSIS_6': ['https://github.com/ARM-software/CMSIS_6.git', -- cgit v1.3.1 From 09bce3532c9279b54f5dc1e48c51959344df6c56 Mon Sep 17 00:00:00 2001 From: HiFiPhile Date: Sun, 9 Feb 2025 00:04:16 +0100 Subject: Add CMake presets. Signed-off-by: HiFiPhile --- .gitignore | 8 +- examples/CMakePresets.json | 6 + examples/device/CMakePresets.json | 6 + .../device/audio_4_channel_mic/CMakePresets.json | 6 + .../audio_4_channel_mic_freertos/CMakePresets.json | 6 + .../src/CMakePresets.json | 6 + examples/device/audio_test/CMakePresets.json | 6 + .../device/audio_test_freertos/CMakePresets.json | 6 + .../audio_test_freertos/src/CMakePresets.json | 6 + .../device/audio_test_multi_rate/CMakePresets.json | 6 + examples/device/board_test/CMakePresets.json | 6 + examples/device/board_test/src/CMakePresets.json | 6 + examples/device/cdc_dual_ports/CMakePresets.json | 6 + examples/device/cdc_msc/CMakePresets.json | 6 + examples/device/cdc_msc_freertos/CMakePresets.json | 6 + .../device/cdc_msc_freertos/src/CMakePresets.json | 6 + examples/device/cdc_uac2/CMakePresets.json | 6 + examples/device/dfu/CMakePresets.json | 6 + examples/device/dfu_runtime/CMakePresets.json | 6 + .../device/dynamic_configuration/CMakePresets.json | 6 + .../device/hid_boot_interface/CMakePresets.json | 6 + examples/device/hid_composite/CMakePresets.json | 6 + .../hid_composite_freertos/CMakePresets.json | 6 + .../hid_composite_freertos/src/CMakePresets.json | 6 + .../device/hid_generic_inout/CMakePresets.json | 6 + .../hid_multiple_interface/CMakePresets.json | 6 + examples/device/midi_test/CMakePresets.json | 6 + .../device/midi_test_freertos/CMakePresets.json | 6 + .../midi_test_freertos/src/CMakePresets.json | 6 + examples/device/msc_dual_lun/CMakePresets.json | 6 + .../device/net_lwip_webserver/CMakePresets.json | 6 + examples/device/uac2_headset/CMakePresets.json | 6 + examples/device/uac2_speaker_fb/CMakePresets.json | 6 + examples/device/usbtmc/CMakePresets.json | 6 + examples/device/video_capture/CMakePresets.json | 6 + .../device/video_capture/src/CMakePresets.json | 6 + .../device/video_capture_2ch/CMakePresets.json | 6 + .../device/video_capture_2ch/src/CMakePresets.json | 6 + examples/device/webusb_serial/CMakePresets.json | 6 + examples/dual/CMakePresets.json | 6 + .../dual/host_hid_to_device_cdc/CMakePresets.json | 6 + .../dual/host_info_to_device_cdc/CMakePresets.json | 6 + examples/host/CMakePresets.json | 6 + examples/host/bare_api/CMakePresets.json | 6 + examples/host/cdc_msc_hid/CMakePresets.json | 6 + .../host/cdc_msc_hid_freertos/CMakePresets.json | 6 + .../cdc_msc_hid_freertos/src/CMakePresets.json | 6 + examples/host/device_info/CMakePresets.json | 6 + examples/host/device_info/src/CMakePresets.json | 6 + examples/host/hid_controller/CMakePresets.json | 6 + examples/host/msc_file_explorer/CMakePresets.json | 6 + examples/typec/CMakePresets.json | 6 + examples/typec/power_delivery/CMakePresets.json | 6 + hw/bsp/BoardPresets.json | 4002 ++++++++++++++++++++ hw/bsp/family_support.cmake | 6 +- tools/gen_presets.py | 91 + 56 files changed, 4417 insertions(+), 2 deletions(-) create mode 100644 examples/CMakePresets.json create mode 100644 examples/device/CMakePresets.json create mode 100644 examples/device/audio_4_channel_mic/CMakePresets.json create mode 100644 examples/device/audio_4_channel_mic_freertos/CMakePresets.json create mode 100644 examples/device/audio_4_channel_mic_freertos/src/CMakePresets.json create mode 100644 examples/device/audio_test/CMakePresets.json create mode 100644 examples/device/audio_test_freertos/CMakePresets.json create mode 100644 examples/device/audio_test_freertos/src/CMakePresets.json create mode 100644 examples/device/audio_test_multi_rate/CMakePresets.json create mode 100644 examples/device/board_test/CMakePresets.json create mode 100644 examples/device/board_test/src/CMakePresets.json create mode 100644 examples/device/cdc_dual_ports/CMakePresets.json create mode 100644 examples/device/cdc_msc/CMakePresets.json create mode 100644 examples/device/cdc_msc_freertos/CMakePresets.json create mode 100644 examples/device/cdc_msc_freertos/src/CMakePresets.json create mode 100644 examples/device/cdc_uac2/CMakePresets.json create mode 100644 examples/device/dfu/CMakePresets.json create mode 100644 examples/device/dfu_runtime/CMakePresets.json create mode 100644 examples/device/dynamic_configuration/CMakePresets.json create mode 100644 examples/device/hid_boot_interface/CMakePresets.json create mode 100644 examples/device/hid_composite/CMakePresets.json create mode 100644 examples/device/hid_composite_freertos/CMakePresets.json create mode 100644 examples/device/hid_composite_freertos/src/CMakePresets.json create mode 100644 examples/device/hid_generic_inout/CMakePresets.json create mode 100644 examples/device/hid_multiple_interface/CMakePresets.json create mode 100644 examples/device/midi_test/CMakePresets.json create mode 100644 examples/device/midi_test_freertos/CMakePresets.json create mode 100644 examples/device/midi_test_freertos/src/CMakePresets.json create mode 100644 examples/device/msc_dual_lun/CMakePresets.json create mode 100644 examples/device/net_lwip_webserver/CMakePresets.json create mode 100644 examples/device/uac2_headset/CMakePresets.json create mode 100644 examples/device/uac2_speaker_fb/CMakePresets.json create mode 100644 examples/device/usbtmc/CMakePresets.json create mode 100644 examples/device/video_capture/CMakePresets.json create mode 100644 examples/device/video_capture/src/CMakePresets.json create mode 100644 examples/device/video_capture_2ch/CMakePresets.json create mode 100644 examples/device/video_capture_2ch/src/CMakePresets.json create mode 100644 examples/device/webusb_serial/CMakePresets.json create mode 100644 examples/dual/CMakePresets.json create mode 100644 examples/dual/host_hid_to_device_cdc/CMakePresets.json create mode 100644 examples/dual/host_info_to_device_cdc/CMakePresets.json create mode 100644 examples/host/CMakePresets.json create mode 100644 examples/host/bare_api/CMakePresets.json create mode 100644 examples/host/cdc_msc_hid/CMakePresets.json create mode 100644 examples/host/cdc_msc_hid_freertos/CMakePresets.json create mode 100644 examples/host/cdc_msc_hid_freertos/src/CMakePresets.json create mode 100644 examples/host/device_info/CMakePresets.json create mode 100644 examples/host/device_info/src/CMakePresets.json create mode 100644 examples/host/hid_controller/CMakePresets.json create mode 100644 examples/host/msc_file_explorer/CMakePresets.json create mode 100644 examples/typec/CMakePresets.json create mode 100644 examples/typec/power_delivery/CMakePresets.json create mode 100644 hw/bsp/BoardPresets.json create mode 100755 tools/gen_presets.py (limited to 'tools') diff --git a/.gitignore b/.gitignore index 010b5c9ed..f981110b2 100644 --- a/.gitignore +++ b/.gitignore @@ -37,4 +37,10 @@ cmake-build-* sdkconfig .PVS-Studio .vscode/ -build/ +build +CMakeFiles +Debug +RelWithDebInfo +Release +BrowseInfo +.cmake_build diff --git a/examples/CMakePresets.json b/examples/CMakePresets.json new file mode 100644 index 000000000..5cd8971e9 --- /dev/null +++ b/examples/CMakePresets.json @@ -0,0 +1,6 @@ +{ + "version": 6, + "include": [ + "../../../hw/bsp/BoardPresets.json" + ] +} diff --git a/examples/device/CMakePresets.json b/examples/device/CMakePresets.json new file mode 100644 index 000000000..5cd8971e9 --- /dev/null +++ b/examples/device/CMakePresets.json @@ -0,0 +1,6 @@ +{ + "version": 6, + "include": [ + "../../../hw/bsp/BoardPresets.json" + ] +} diff --git a/examples/device/audio_4_channel_mic/CMakePresets.json b/examples/device/audio_4_channel_mic/CMakePresets.json new file mode 100644 index 000000000..5cd8971e9 --- /dev/null +++ b/examples/device/audio_4_channel_mic/CMakePresets.json @@ -0,0 +1,6 @@ +{ + "version": 6, + "include": [ + "../../../hw/bsp/BoardPresets.json" + ] +} diff --git a/examples/device/audio_4_channel_mic_freertos/CMakePresets.json b/examples/device/audio_4_channel_mic_freertos/CMakePresets.json new file mode 100644 index 000000000..5cd8971e9 --- /dev/null +++ b/examples/device/audio_4_channel_mic_freertos/CMakePresets.json @@ -0,0 +1,6 @@ +{ + "version": 6, + "include": [ + "../../../hw/bsp/BoardPresets.json" + ] +} diff --git a/examples/device/audio_4_channel_mic_freertos/src/CMakePresets.json b/examples/device/audio_4_channel_mic_freertos/src/CMakePresets.json new file mode 100644 index 000000000..5cd8971e9 --- /dev/null +++ b/examples/device/audio_4_channel_mic_freertos/src/CMakePresets.json @@ -0,0 +1,6 @@ +{ + "version": 6, + "include": [ + "../../../hw/bsp/BoardPresets.json" + ] +} diff --git a/examples/device/audio_test/CMakePresets.json b/examples/device/audio_test/CMakePresets.json new file mode 100644 index 000000000..5cd8971e9 --- /dev/null +++ b/examples/device/audio_test/CMakePresets.json @@ -0,0 +1,6 @@ +{ + "version": 6, + "include": [ + "../../../hw/bsp/BoardPresets.json" + ] +} diff --git a/examples/device/audio_test_freertos/CMakePresets.json b/examples/device/audio_test_freertos/CMakePresets.json new file mode 100644 index 000000000..5cd8971e9 --- /dev/null +++ b/examples/device/audio_test_freertos/CMakePresets.json @@ -0,0 +1,6 @@ +{ + "version": 6, + "include": [ + "../../../hw/bsp/BoardPresets.json" + ] +} diff --git a/examples/device/audio_test_freertos/src/CMakePresets.json b/examples/device/audio_test_freertos/src/CMakePresets.json new file mode 100644 index 000000000..5cd8971e9 --- /dev/null +++ b/examples/device/audio_test_freertos/src/CMakePresets.json @@ -0,0 +1,6 @@ +{ + "version": 6, + "include": [ + "../../../hw/bsp/BoardPresets.json" + ] +} diff --git a/examples/device/audio_test_multi_rate/CMakePresets.json b/examples/device/audio_test_multi_rate/CMakePresets.json new file mode 100644 index 000000000..5cd8971e9 --- /dev/null +++ b/examples/device/audio_test_multi_rate/CMakePresets.json @@ -0,0 +1,6 @@ +{ + "version": 6, + "include": [ + "../../../hw/bsp/BoardPresets.json" + ] +} diff --git a/examples/device/board_test/CMakePresets.json b/examples/device/board_test/CMakePresets.json new file mode 100644 index 000000000..5cd8971e9 --- /dev/null +++ b/examples/device/board_test/CMakePresets.json @@ -0,0 +1,6 @@ +{ + "version": 6, + "include": [ + "../../../hw/bsp/BoardPresets.json" + ] +} diff --git a/examples/device/board_test/src/CMakePresets.json b/examples/device/board_test/src/CMakePresets.json new file mode 100644 index 000000000..5cd8971e9 --- /dev/null +++ b/examples/device/board_test/src/CMakePresets.json @@ -0,0 +1,6 @@ +{ + "version": 6, + "include": [ + "../../../hw/bsp/BoardPresets.json" + ] +} diff --git a/examples/device/cdc_dual_ports/CMakePresets.json b/examples/device/cdc_dual_ports/CMakePresets.json new file mode 100644 index 000000000..5cd8971e9 --- /dev/null +++ b/examples/device/cdc_dual_ports/CMakePresets.json @@ -0,0 +1,6 @@ +{ + "version": 6, + "include": [ + "../../../hw/bsp/BoardPresets.json" + ] +} diff --git a/examples/device/cdc_msc/CMakePresets.json b/examples/device/cdc_msc/CMakePresets.json new file mode 100644 index 000000000..5cd8971e9 --- /dev/null +++ b/examples/device/cdc_msc/CMakePresets.json @@ -0,0 +1,6 @@ +{ + "version": 6, + "include": [ + "../../../hw/bsp/BoardPresets.json" + ] +} diff --git a/examples/device/cdc_msc_freertos/CMakePresets.json b/examples/device/cdc_msc_freertos/CMakePresets.json new file mode 100644 index 000000000..5cd8971e9 --- /dev/null +++ b/examples/device/cdc_msc_freertos/CMakePresets.json @@ -0,0 +1,6 @@ +{ + "version": 6, + "include": [ + "../../../hw/bsp/BoardPresets.json" + ] +} diff --git a/examples/device/cdc_msc_freertos/src/CMakePresets.json b/examples/device/cdc_msc_freertos/src/CMakePresets.json new file mode 100644 index 000000000..5cd8971e9 --- /dev/null +++ b/examples/device/cdc_msc_freertos/src/CMakePresets.json @@ -0,0 +1,6 @@ +{ + "version": 6, + "include": [ + "../../../hw/bsp/BoardPresets.json" + ] +} diff --git a/examples/device/cdc_uac2/CMakePresets.json b/examples/device/cdc_uac2/CMakePresets.json new file mode 100644 index 000000000..5cd8971e9 --- /dev/null +++ b/examples/device/cdc_uac2/CMakePresets.json @@ -0,0 +1,6 @@ +{ + "version": 6, + "include": [ + "../../../hw/bsp/BoardPresets.json" + ] +} diff --git a/examples/device/dfu/CMakePresets.json b/examples/device/dfu/CMakePresets.json new file mode 100644 index 000000000..5cd8971e9 --- /dev/null +++ b/examples/device/dfu/CMakePresets.json @@ -0,0 +1,6 @@ +{ + "version": 6, + "include": [ + "../../../hw/bsp/BoardPresets.json" + ] +} diff --git a/examples/device/dfu_runtime/CMakePresets.json b/examples/device/dfu_runtime/CMakePresets.json new file mode 100644 index 000000000..5cd8971e9 --- /dev/null +++ b/examples/device/dfu_runtime/CMakePresets.json @@ -0,0 +1,6 @@ +{ + "version": 6, + "include": [ + "../../../hw/bsp/BoardPresets.json" + ] +} diff --git a/examples/device/dynamic_configuration/CMakePresets.json b/examples/device/dynamic_configuration/CMakePresets.json new file mode 100644 index 000000000..5cd8971e9 --- /dev/null +++ b/examples/device/dynamic_configuration/CMakePresets.json @@ -0,0 +1,6 @@ +{ + "version": 6, + "include": [ + "../../../hw/bsp/BoardPresets.json" + ] +} diff --git a/examples/device/hid_boot_interface/CMakePresets.json b/examples/device/hid_boot_interface/CMakePresets.json new file mode 100644 index 000000000..5cd8971e9 --- /dev/null +++ b/examples/device/hid_boot_interface/CMakePresets.json @@ -0,0 +1,6 @@ +{ + "version": 6, + "include": [ + "../../../hw/bsp/BoardPresets.json" + ] +} diff --git a/examples/device/hid_composite/CMakePresets.json b/examples/device/hid_composite/CMakePresets.json new file mode 100644 index 000000000..5cd8971e9 --- /dev/null +++ b/examples/device/hid_composite/CMakePresets.json @@ -0,0 +1,6 @@ +{ + "version": 6, + "include": [ + "../../../hw/bsp/BoardPresets.json" + ] +} diff --git a/examples/device/hid_composite_freertos/CMakePresets.json b/examples/device/hid_composite_freertos/CMakePresets.json new file mode 100644 index 000000000..5cd8971e9 --- /dev/null +++ b/examples/device/hid_composite_freertos/CMakePresets.json @@ -0,0 +1,6 @@ +{ + "version": 6, + "include": [ + "../../../hw/bsp/BoardPresets.json" + ] +} diff --git a/examples/device/hid_composite_freertos/src/CMakePresets.json b/examples/device/hid_composite_freertos/src/CMakePresets.json new file mode 100644 index 000000000..5cd8971e9 --- /dev/null +++ b/examples/device/hid_composite_freertos/src/CMakePresets.json @@ -0,0 +1,6 @@ +{ + "version": 6, + "include": [ + "../../../hw/bsp/BoardPresets.json" + ] +} diff --git a/examples/device/hid_generic_inout/CMakePresets.json b/examples/device/hid_generic_inout/CMakePresets.json new file mode 100644 index 000000000..5cd8971e9 --- /dev/null +++ b/examples/device/hid_generic_inout/CMakePresets.json @@ -0,0 +1,6 @@ +{ + "version": 6, + "include": [ + "../../../hw/bsp/BoardPresets.json" + ] +} diff --git a/examples/device/hid_multiple_interface/CMakePresets.json b/examples/device/hid_multiple_interface/CMakePresets.json new file mode 100644 index 000000000..5cd8971e9 --- /dev/null +++ b/examples/device/hid_multiple_interface/CMakePresets.json @@ -0,0 +1,6 @@ +{ + "version": 6, + "include": [ + "../../../hw/bsp/BoardPresets.json" + ] +} diff --git a/examples/device/midi_test/CMakePresets.json b/examples/device/midi_test/CMakePresets.json new file mode 100644 index 000000000..5cd8971e9 --- /dev/null +++ b/examples/device/midi_test/CMakePresets.json @@ -0,0 +1,6 @@ +{ + "version": 6, + "include": [ + "../../../hw/bsp/BoardPresets.json" + ] +} diff --git a/examples/device/midi_test_freertos/CMakePresets.json b/examples/device/midi_test_freertos/CMakePresets.json new file mode 100644 index 000000000..5cd8971e9 --- /dev/null +++ b/examples/device/midi_test_freertos/CMakePresets.json @@ -0,0 +1,6 @@ +{ + "version": 6, + "include": [ + "../../../hw/bsp/BoardPresets.json" + ] +} diff --git a/examples/device/midi_test_freertos/src/CMakePresets.json b/examples/device/midi_test_freertos/src/CMakePresets.json new file mode 100644 index 000000000..5cd8971e9 --- /dev/null +++ b/examples/device/midi_test_freertos/src/CMakePresets.json @@ -0,0 +1,6 @@ +{ + "version": 6, + "include": [ + "../../../hw/bsp/BoardPresets.json" + ] +} diff --git a/examples/device/msc_dual_lun/CMakePresets.json b/examples/device/msc_dual_lun/CMakePresets.json new file mode 100644 index 000000000..5cd8971e9 --- /dev/null +++ b/examples/device/msc_dual_lun/CMakePresets.json @@ -0,0 +1,6 @@ +{ + "version": 6, + "include": [ + "../../../hw/bsp/BoardPresets.json" + ] +} diff --git a/examples/device/net_lwip_webserver/CMakePresets.json b/examples/device/net_lwip_webserver/CMakePresets.json new file mode 100644 index 000000000..5cd8971e9 --- /dev/null +++ b/examples/device/net_lwip_webserver/CMakePresets.json @@ -0,0 +1,6 @@ +{ + "version": 6, + "include": [ + "../../../hw/bsp/BoardPresets.json" + ] +} diff --git a/examples/device/uac2_headset/CMakePresets.json b/examples/device/uac2_headset/CMakePresets.json new file mode 100644 index 000000000..5cd8971e9 --- /dev/null +++ b/examples/device/uac2_headset/CMakePresets.json @@ -0,0 +1,6 @@ +{ + "version": 6, + "include": [ + "../../../hw/bsp/BoardPresets.json" + ] +} diff --git a/examples/device/uac2_speaker_fb/CMakePresets.json b/examples/device/uac2_speaker_fb/CMakePresets.json new file mode 100644 index 000000000..5cd8971e9 --- /dev/null +++ b/examples/device/uac2_speaker_fb/CMakePresets.json @@ -0,0 +1,6 @@ +{ + "version": 6, + "include": [ + "../../../hw/bsp/BoardPresets.json" + ] +} diff --git a/examples/device/usbtmc/CMakePresets.json b/examples/device/usbtmc/CMakePresets.json new file mode 100644 index 000000000..5cd8971e9 --- /dev/null +++ b/examples/device/usbtmc/CMakePresets.json @@ -0,0 +1,6 @@ +{ + "version": 6, + "include": [ + "../../../hw/bsp/BoardPresets.json" + ] +} diff --git a/examples/device/video_capture/CMakePresets.json b/examples/device/video_capture/CMakePresets.json new file mode 100644 index 000000000..5cd8971e9 --- /dev/null +++ b/examples/device/video_capture/CMakePresets.json @@ -0,0 +1,6 @@ +{ + "version": 6, + "include": [ + "../../../hw/bsp/BoardPresets.json" + ] +} diff --git a/examples/device/video_capture/src/CMakePresets.json b/examples/device/video_capture/src/CMakePresets.json new file mode 100644 index 000000000..5cd8971e9 --- /dev/null +++ b/examples/device/video_capture/src/CMakePresets.json @@ -0,0 +1,6 @@ +{ + "version": 6, + "include": [ + "../../../hw/bsp/BoardPresets.json" + ] +} diff --git a/examples/device/video_capture_2ch/CMakePresets.json b/examples/device/video_capture_2ch/CMakePresets.json new file mode 100644 index 000000000..5cd8971e9 --- /dev/null +++ b/examples/device/video_capture_2ch/CMakePresets.json @@ -0,0 +1,6 @@ +{ + "version": 6, + "include": [ + "../../../hw/bsp/BoardPresets.json" + ] +} diff --git a/examples/device/video_capture_2ch/src/CMakePresets.json b/examples/device/video_capture_2ch/src/CMakePresets.json new file mode 100644 index 000000000..5cd8971e9 --- /dev/null +++ b/examples/device/video_capture_2ch/src/CMakePresets.json @@ -0,0 +1,6 @@ +{ + "version": 6, + "include": [ + "../../../hw/bsp/BoardPresets.json" + ] +} diff --git a/examples/device/webusb_serial/CMakePresets.json b/examples/device/webusb_serial/CMakePresets.json new file mode 100644 index 000000000..5cd8971e9 --- /dev/null +++ b/examples/device/webusb_serial/CMakePresets.json @@ -0,0 +1,6 @@ +{ + "version": 6, + "include": [ + "../../../hw/bsp/BoardPresets.json" + ] +} diff --git a/examples/dual/CMakePresets.json b/examples/dual/CMakePresets.json new file mode 100644 index 000000000..5cd8971e9 --- /dev/null +++ b/examples/dual/CMakePresets.json @@ -0,0 +1,6 @@ +{ + "version": 6, + "include": [ + "../../../hw/bsp/BoardPresets.json" + ] +} diff --git a/examples/dual/host_hid_to_device_cdc/CMakePresets.json b/examples/dual/host_hid_to_device_cdc/CMakePresets.json new file mode 100644 index 000000000..5cd8971e9 --- /dev/null +++ b/examples/dual/host_hid_to_device_cdc/CMakePresets.json @@ -0,0 +1,6 @@ +{ + "version": 6, + "include": [ + "../../../hw/bsp/BoardPresets.json" + ] +} diff --git a/examples/dual/host_info_to_device_cdc/CMakePresets.json b/examples/dual/host_info_to_device_cdc/CMakePresets.json new file mode 100644 index 000000000..5cd8971e9 --- /dev/null +++ b/examples/dual/host_info_to_device_cdc/CMakePresets.json @@ -0,0 +1,6 @@ +{ + "version": 6, + "include": [ + "../../../hw/bsp/BoardPresets.json" + ] +} diff --git a/examples/host/CMakePresets.json b/examples/host/CMakePresets.json new file mode 100644 index 000000000..5cd8971e9 --- /dev/null +++ b/examples/host/CMakePresets.json @@ -0,0 +1,6 @@ +{ + "version": 6, + "include": [ + "../../../hw/bsp/BoardPresets.json" + ] +} diff --git a/examples/host/bare_api/CMakePresets.json b/examples/host/bare_api/CMakePresets.json new file mode 100644 index 000000000..5cd8971e9 --- /dev/null +++ b/examples/host/bare_api/CMakePresets.json @@ -0,0 +1,6 @@ +{ + "version": 6, + "include": [ + "../../../hw/bsp/BoardPresets.json" + ] +} diff --git a/examples/host/cdc_msc_hid/CMakePresets.json b/examples/host/cdc_msc_hid/CMakePresets.json new file mode 100644 index 000000000..5cd8971e9 --- /dev/null +++ b/examples/host/cdc_msc_hid/CMakePresets.json @@ -0,0 +1,6 @@ +{ + "version": 6, + "include": [ + "../../../hw/bsp/BoardPresets.json" + ] +} diff --git a/examples/host/cdc_msc_hid_freertos/CMakePresets.json b/examples/host/cdc_msc_hid_freertos/CMakePresets.json new file mode 100644 index 000000000..5cd8971e9 --- /dev/null +++ b/examples/host/cdc_msc_hid_freertos/CMakePresets.json @@ -0,0 +1,6 @@ +{ + "version": 6, + "include": [ + "../../../hw/bsp/BoardPresets.json" + ] +} diff --git a/examples/host/cdc_msc_hid_freertos/src/CMakePresets.json b/examples/host/cdc_msc_hid_freertos/src/CMakePresets.json new file mode 100644 index 000000000..5cd8971e9 --- /dev/null +++ b/examples/host/cdc_msc_hid_freertos/src/CMakePresets.json @@ -0,0 +1,6 @@ +{ + "version": 6, + "include": [ + "../../../hw/bsp/BoardPresets.json" + ] +} diff --git a/examples/host/device_info/CMakePresets.json b/examples/host/device_info/CMakePresets.json new file mode 100644 index 000000000..5cd8971e9 --- /dev/null +++ b/examples/host/device_info/CMakePresets.json @@ -0,0 +1,6 @@ +{ + "version": 6, + "include": [ + "../../../hw/bsp/BoardPresets.json" + ] +} diff --git a/examples/host/device_info/src/CMakePresets.json b/examples/host/device_info/src/CMakePresets.json new file mode 100644 index 000000000..5cd8971e9 --- /dev/null +++ b/examples/host/device_info/src/CMakePresets.json @@ -0,0 +1,6 @@ +{ + "version": 6, + "include": [ + "../../../hw/bsp/BoardPresets.json" + ] +} diff --git a/examples/host/hid_controller/CMakePresets.json b/examples/host/hid_controller/CMakePresets.json new file mode 100644 index 000000000..5cd8971e9 --- /dev/null +++ b/examples/host/hid_controller/CMakePresets.json @@ -0,0 +1,6 @@ +{ + "version": 6, + "include": [ + "../../../hw/bsp/BoardPresets.json" + ] +} diff --git a/examples/host/msc_file_explorer/CMakePresets.json b/examples/host/msc_file_explorer/CMakePresets.json new file mode 100644 index 000000000..5cd8971e9 --- /dev/null +++ b/examples/host/msc_file_explorer/CMakePresets.json @@ -0,0 +1,6 @@ +{ + "version": 6, + "include": [ + "../../../hw/bsp/BoardPresets.json" + ] +} diff --git a/examples/typec/CMakePresets.json b/examples/typec/CMakePresets.json new file mode 100644 index 000000000..5cd8971e9 --- /dev/null +++ b/examples/typec/CMakePresets.json @@ -0,0 +1,6 @@ +{ + "version": 6, + "include": [ + "../../../hw/bsp/BoardPresets.json" + ] +} diff --git a/examples/typec/power_delivery/CMakePresets.json b/examples/typec/power_delivery/CMakePresets.json new file mode 100644 index 000000000..5cd8971e9 --- /dev/null +++ b/examples/typec/power_delivery/CMakePresets.json @@ -0,0 +1,6 @@ +{ + "version": 6, + "include": [ + "../../../hw/bsp/BoardPresets.json" + ] +} diff --git a/hw/bsp/BoardPresets.json b/hw/bsp/BoardPresets.json new file mode 100644 index 000000000..c295efbdd --- /dev/null +++ b/hw/bsp/BoardPresets.json @@ -0,0 +1,4002 @@ +{ + "version": 6, + "configurePresets": [ + { + "name": "default", + "hidden": true, + "description": "Configure preset for the ${presetName} board", + "generator": "Ninja", + "binaryDir": "${sourceDir}/build/${presetName}", + "cacheVariables": { + "CMAKE_BUILD_TYPE": "RelWithDebInfo", + "BOARD": "${presetName}" + } + }, + { + "name": "raspberrypi_zero", + "inherits": "default" + }, + { + "name": "raspberrypi_cm4", + "inherits": "default" + }, + { + "name": "raspberrypi_zero2", + "inherits": "default" + }, + { + "name": "ch32v103r_r1_1v0", + "inherits": "default" + }, + { + "name": "ch32v203c_r0_1v0", + "inherits": "default" + }, + { + "name": "ch32v203g_r0_1v0", + "inherits": "default" + }, + { + "name": "nanoch32v203", + "inherits": "default" + }, + { + "name": "ch32v307v_r1_1v0", + "inherits": "default" + }, + { + "name": "da14695_dk_usb", + "inherits": "default" + }, + { + "name": "da1469x_dk_pro", + "inherits": "default" + }, + { + "name": "adafruit_feather_esp32s2", + "inherits": "default" + }, + { + "name": "adafruit_feather_esp32s3", + "inherits": "default" + }, + { + "name": "adafruit_feather_esp32_v2", + "inherits": "default" + }, + { + "name": "adafruit_magtag_29gray", + "inherits": "default" + }, + { + "name": "adafruit_metro_esp32s2", + "inherits": "default" + }, + { + "name": "espressif_addax_1", + "inherits": "default" + }, + { + "name": "espressif_c3_devkitc", + "inherits": "default" + }, + { + "name": "espressif_c6_devkitc", + "inherits": "default" + }, + { + "name": "espressif_kaluga_1", + "inherits": "default" + }, + { + "name": "espressif_p4_function_ev", + "inherits": "default" + }, + { + "name": "espressif_s2_devkitc", + "inherits": "default" + }, + { + "name": "espressif_s3_devkitc", + "inherits": "default" + }, + { + "name": "espressif_s3_devkitm", + "inherits": "default" + }, + { + "name": "espressif_saola_1", + "inherits": "default" + }, + { + "name": "f1c100s", + "inherits": "default" + }, + { + "name": "fomu", + "inherits": "default" + }, + { + "name": "sipeed_longan_nano", + "inherits": "default" + }, + { + "name": "metro_m7_1011", + "inherits": "default" + }, + { + "name": "metro_m7_1011_sd", + "inherits": "default" + }, + { + "name": "mimxrt1010_evk", + "inherits": "default" + }, + { + "name": "mimxrt1015_evk", + "inherits": "default" + }, + { + "name": "mimxrt1020_evk", + "inherits": "default" + }, + { + "name": "mimxrt1024_evk", + "inherits": "default" + }, + { + "name": "mimxrt1050_evkb", + "inherits": "default" + }, + { + "name": "mimxrt1060_evk", + "inherits": "default" + }, + { + "name": "mimxrt1064_evk", + "inherits": "default" + }, + { + "name": "mimxrt1170_evkb", + "inherits": "default" + }, + { + "name": "teensy_40", + "inherits": "default" + }, + { + "name": "teensy_41", + "inherits": "default" + }, + { + "name": "frdm_k64f", + "inherits": "default" + }, + { + "name": "teensy_35", + "inherits": "default" + }, + { + "name": "frdm_k32l2a4s", + "inherits": "default" + }, + { + "name": "frdm_k32l2b", + "inherits": "default" + }, + { + "name": "kuiic", + "inherits": "default" + }, + { + "name": "frdm_kl25z", + "inherits": "default" + }, + { + "name": "lpcxpresso11u37", + "inherits": "default" + }, + { + "name": "lpcxpresso11u68", + "inherits": "default" + }, + { + "name": "lpcxpresso1347", + "inherits": "default" + }, + { + "name": "lpcxpresso1549", + "inherits": "default" + }, + { + "name": "lpcxpresso1769", + "inherits": "default" + }, + { + "name": "mbed1768", + "inherits": "default" + }, + { + "name": "lpcxpresso18s37", + "inherits": "default" + }, + { + "name": "mcb1800", + "inherits": "default" + }, + { + "name": "ea4088_quickstart", + "inherits": "default" + }, + { + "name": "ea4357", + "inherits": "default" + }, + { + "name": "lpcxpresso43s67", + "inherits": "default" + }, + { + "name": "lpcxpresso51u68", + "inherits": "default" + }, + { + "name": "lpcxpresso54114", + "inherits": "default" + }, + { + "name": "lpcxpresso54608", + "inherits": "default" + }, + { + "name": "lpcxpresso54628", + "inherits": "default" + }, + { + "name": "double_m33_express", + "inherits": "default" + }, + { + "name": "lpcxpresso55s28", + "inherits": "default" + }, + { + "name": "lpcxpresso55s69", + "inherits": "default" + }, + { + "name": "mcu_link", + "inherits": "default" + }, + { + "name": "max32650evkit", + "inherits": "default" + }, + { + "name": "max32650fthr", + "inherits": "default" + }, + { + "name": "max32651evkit", + "inherits": "default" + }, + { + "name": "max32666evkit", + "inherits": "default" + }, + { + "name": "max32666fthr", + "inherits": "default" + }, + { + "name": "apard32690", + "inherits": "default" + }, + { + "name": "max32690evkit", + "inherits": "default" + }, + { + "name": "max78002evkit", + "inherits": "default" + }, + { + "name": "frdm_mcxa153", + "inherits": "default" + }, + { + "name": "frdm_mcxn947", + "inherits": "default" + }, + { + "name": "mcxn947brk", + "inherits": "default" + }, + { + "name": "mm32f327x_mb39", + "inherits": "default" + }, + { + "name": "mm32f327x_pitaya_lite", + "inherits": "default" + }, + { + "name": "msp_exp430f5529lp", + "inherits": "default" + }, + { + "name": "msp_exp432e401y", + "inherits": "default" + }, + { + "name": "adafruit_clue", + "inherits": "default" + }, + { + "name": "arduino_nano33_ble", + "inherits": "default" + }, + { + "name": "circuitplayground_bluefruit", + "inherits": "default" + }, + { + "name": "feather_nrf52840_express", + "inherits": "default" + }, + { + "name": "feather_nrf52840_sense", + "inherits": "default" + }, + { + "name": "itsybitsy_nrf52840", + "inherits": "default" + }, + { + "name": "pca10056", + "inherits": "default" + }, + { + "name": "pca10059", + "inherits": "default" + }, + { + "name": "pca10095", + "inherits": "default" + }, + { + "name": "pca10100", + "inherits": "default" + }, + { + "name": "portenta_c33", + "inherits": "default" + }, + { + "name": "ra2a1_ek", + "inherits": "default" + }, + { + "name": "ra4m1_ek", + "inherits": "default" + }, + { + "name": "ra4m3_ek", + "inherits": "default" + }, + { + "name": "ra6m1_ek", + "inherits": "default" + }, + { + "name": "ra6m5_ek", + "inherits": "default" + }, + { + "name": "ra8m1_ek", + "inherits": "default" + }, + { + "name": "uno_r4", + "inherits": "default" + }, + { + "name": "feather_rp2040_max3421", + "inherits": "default" + }, + { + "name": "pico_sdk", + "inherits": "default" + }, + { + "name": "raspberry_pi_pico", + "inherits": "default" + }, + { + "name": "raspberry_pi_pico2", + "inherits": "default" + }, + { + "name": "cynthion_d11", + "inherits": "default" + }, + { + "name": "samd11_xplained", + "inherits": "default" + }, + { + "name": "atsamd21_xpro", + "inherits": "default" + }, + { + "name": "circuitplayground_express", + "inherits": "default" + }, + { + "name": "curiosity_nano", + "inherits": "default" + }, + { + "name": "cynthion_d21", + "inherits": "default" + }, + { + "name": "feather_m0_express", + "inherits": "default" + }, + { + "name": "itsybitsy_m0", + "inherits": "default" + }, + { + "name": "metro_m0_express", + "inherits": "default" + }, + { + "name": "qtpy", + "inherits": "default" + }, + { + "name": "seeeduino_xiao", + "inherits": "default" + }, + { + "name": "sparkfun_samd21_mini_usb", + "inherits": "default" + }, + { + "name": "trinket_m0", + "inherits": "default" + }, + { + "name": "d5035_01", + "inherits": "default" + }, + { + "name": "feather_m4_express", + "inherits": "default" + }, + { + "name": "itsybitsy_m4", + "inherits": "default" + }, + { + "name": "metro_m4_express", + "inherits": "default" + }, + { + "name": "pybadge", + "inherits": "default" + }, + { + "name": "pyportal", + "inherits": "default" + }, + { + "name": "same54_xplained", + "inherits": "default" + }, + { + "name": "samg55_xplained", + "inherits": "default" + }, + { + "name": "atsaml21_xpro", + "inherits": "default" + }, + { + "name": "saml22_feather", + "inherits": "default" + }, + { + "name": "sensorwatch_m0", + "inherits": "default" + }, + { + "name": "stm32c071nucleo", + "inherits": "default" + }, + { + "name": "stm32f070rbnucleo", + "inherits": "default" + }, + { + "name": "stm32f072disco", + "inherits": "default" + }, + { + "name": "stm32f072eval", + "inherits": "default" + }, + { + "name": "stm32f103ze_iar", + "inherits": "default" + }, + { + "name": "stm32f103_bluepill", + "inherits": "default" + }, + { + "name": "stm32f103_mini_2", + "inherits": "default" + }, + { + "name": "stm32f207nucleo", + "inherits": "default" + }, + { + "name": "stm32f303disco", + "inherits": "default" + }, + { + "name": "feather_stm32f405", + "inherits": "default" + }, + { + "name": "pyboardv11", + "inherits": "default" + }, + { + "name": "stm32f401blackpill", + "inherits": "default" + }, + { + "name": "stm32f407blackvet", + "inherits": "default" + }, + { + "name": "stm32f407disco", + "inherits": "default" + }, + { + "name": "stm32f411blackpill", + "inherits": "default" + }, + { + "name": "stm32f411disco", + "inherits": "default" + }, + { + "name": "stm32f412disco", + "inherits": "default" + }, + { + "name": "stm32f412nucleo", + "inherits": "default" + }, + { + "name": "stm32f439nucleo", + "inherits": "default" + }, + { + "name": "stlinkv3mini", + "inherits": "default" + }, + { + "name": "stm32f723disco", + "inherits": "default" + }, + { + "name": "stm32f746disco", + "inherits": "default" + }, + { + "name": "stm32f746nucleo", + "inherits": "default" + }, + { + "name": "stm32f767nucleo", + "inherits": "default" + }, + { + "name": "stm32f769disco", + "inherits": "default" + }, + { + "name": "stm32g0b1nucleo", + "inherits": "default" + }, + { + "name": "b_g474e_dpow1", + "inherits": "default" + }, + { + "name": "stm32g474nucleo", + "inherits": "default" + }, + { + "name": "stm32g491nucleo", + "inherits": "default" + }, + { + "name": "stm32h503nucleo", + "inherits": "default" + }, + { + "name": "stm32h563nucleo", + "inherits": "default" + }, + { + "name": "stm32h573i_dk", + "inherits": "default" + }, + { + "name": "daisyseed", + "inherits": "default" + }, + { + "name": "stm32h723nucleo", + "inherits": "default" + }, + { + "name": "stm32h743eval", + "inherits": "default" + }, + { + "name": "stm32h743nucleo", + "inherits": "default" + }, + { + "name": "stm32h745disco", + "inherits": "default" + }, + { + "name": "stm32h750bdk", + "inherits": "default" + }, + { + "name": "stm32h750_weact", + "inherits": "default" + }, + { + "name": "waveshare_openh743i", + "inherits": "default" + }, + { + "name": "stm32h7s3nucleo", + "inherits": "default" + }, + { + "name": "stm32l052dap52", + "inherits": "default" + }, + { + "name": "stm32l0538disco", + "inherits": "default" + }, + { + "name": "stm32l412nucleo", + "inherits": "default" + }, + { + "name": "stm32l476disco", + "inherits": "default" + }, + { + "name": "stm32l4p5nucleo", + "inherits": "default" + }, + { + "name": "stm32l4r5nucleo", + "inherits": "default" + }, + { + "name": "b_u585i_iot2a", + "inherits": "default" + }, + { + "name": "stm32u545nucleo", + "inherits": "default" + }, + { + "name": "stm32u575eval", + "inherits": "default" + }, + { + "name": "stm32u575nucleo", + "inherits": "default" + }, + { + "name": "stm32u5a5nucleo", + "inherits": "default" + }, + { + "name": "stm32wb55nucleo", + "inherits": "default" + }, + { + "name": "ek_tm4c123gxl", + "inherits": "default" + }, + { + "name": "xmc4500_relax", + "inherits": "default" + }, + { + "name": "xmc4700_relax", + "inherits": "default" + } + ], + "buildPresets": [ + { + "name": "raspberrypi_zero", + "description": "Build preset for the raspberrypi_zero board", + "configurePreset": "raspberrypi_zero" + }, + { + "name": "raspberrypi_cm4", + "description": "Build preset for the raspberrypi_cm4 board", + "configurePreset": "raspberrypi_cm4" + }, + { + "name": "raspberrypi_zero2", + "description": "Build preset for the raspberrypi_zero2 board", + "configurePreset": "raspberrypi_zero2" + }, + { + "name": "ch32v103r_r1_1v0", + "description": "Build preset for the ch32v103r_r1_1v0 board", + "configurePreset": "ch32v103r_r1_1v0" + }, + { + "name": "ch32v203c_r0_1v0", + "description": "Build preset for the ch32v203c_r0_1v0 board", + "configurePreset": "ch32v203c_r0_1v0" + }, + { + "name": "ch32v203g_r0_1v0", + "description": "Build preset for the ch32v203g_r0_1v0 board", + "configurePreset": "ch32v203g_r0_1v0" + }, + { + "name": "nanoch32v203", + "description": "Build preset for the nanoch32v203 board", + "configurePreset": "nanoch32v203" + }, + { + "name": "ch32v307v_r1_1v0", + "description": "Build preset for the ch32v307v_r1_1v0 board", + "configurePreset": "ch32v307v_r1_1v0" + }, + { + "name": "da14695_dk_usb", + "description": "Build preset for the da14695_dk_usb board", + "configurePreset": "da14695_dk_usb" + }, + { + "name": "da1469x_dk_pro", + "description": "Build preset for the da1469x_dk_pro board", + "configurePreset": "da1469x_dk_pro" + }, + { + "name": "adafruit_feather_esp32s2", + "description": "Build preset for the adafruit_feather_esp32s2 board", + "configurePreset": "adafruit_feather_esp32s2" + }, + { + "name": "adafruit_feather_esp32s3", + "description": "Build preset for the adafruit_feather_esp32s3 board", + "configurePreset": "adafruit_feather_esp32s3" + }, + { + "name": "adafruit_feather_esp32_v2", + "description": "Build preset for the adafruit_feather_esp32_v2 board", + "configurePreset": "adafruit_feather_esp32_v2" + }, + { + "name": "adafruit_magtag_29gray", + "description": "Build preset for the adafruit_magtag_29gray board", + "configurePreset": "adafruit_magtag_29gray" + }, + { + "name": "adafruit_metro_esp32s2", + "description": "Build preset for the adafruit_metro_esp32s2 board", + "configurePreset": "adafruit_metro_esp32s2" + }, + { + "name": "espressif_addax_1", + "description": "Build preset for the espressif_addax_1 board", + "configurePreset": "espressif_addax_1" + }, + { + "name": "espressif_c3_devkitc", + "description": "Build preset for the espressif_c3_devkitc board", + "configurePreset": "espressif_c3_devkitc" + }, + { + "name": "espressif_c6_devkitc", + "description": "Build preset for the espressif_c6_devkitc board", + "configurePreset": "espressif_c6_devkitc" + }, + { + "name": "espressif_kaluga_1", + "description": "Build preset for the espressif_kaluga_1 board", + "configurePreset": "espressif_kaluga_1" + }, + { + "name": "espressif_p4_function_ev", + "description": "Build preset for the espressif_p4_function_ev board", + "configurePreset": "espressif_p4_function_ev" + }, + { + "name": "espressif_s2_devkitc", + "description": "Build preset for the espressif_s2_devkitc board", + "configurePreset": "espressif_s2_devkitc" + }, + { + "name": "espressif_s3_devkitc", + "description": "Build preset for the espressif_s3_devkitc board", + "configurePreset": "espressif_s3_devkitc" + }, + { + "name": "espressif_s3_devkitm", + "description": "Build preset for the espressif_s3_devkitm board", + "configurePreset": "espressif_s3_devkitm" + }, + { + "name": "espressif_saola_1", + "description": "Build preset for the espressif_saola_1 board", + "configurePreset": "espressif_saola_1" + }, + { + "name": "f1c100s", + "description": "Build preset for the f1c100s board", + "configurePreset": "f1c100s" + }, + { + "name": "fomu", + "description": "Build preset for the fomu board", + "configurePreset": "fomu" + }, + { + "name": "sipeed_longan_nano", + "description": "Build preset for the sipeed_longan_nano board", + "configurePreset": "sipeed_longan_nano" + }, + { + "name": "metro_m7_1011", + "description": "Build preset for the metro_m7_1011 board", + "configurePreset": "metro_m7_1011" + }, + { + "name": "metro_m7_1011_sd", + "description": "Build preset for the metro_m7_1011_sd board", + "configurePreset": "metro_m7_1011_sd" + }, + { + "name": "mimxrt1010_evk", + "description": "Build preset for the mimxrt1010_evk board", + "configurePreset": "mimxrt1010_evk" + }, + { + "name": "mimxrt1015_evk", + "description": "Build preset for the mimxrt1015_evk board", + "configurePreset": "mimxrt1015_evk" + }, + { + "name": "mimxrt1020_evk", + "description": "Build preset for the mimxrt1020_evk board", + "configurePreset": "mimxrt1020_evk" + }, + { + "name": "mimxrt1024_evk", + "description": "Build preset for the mimxrt1024_evk board", + "configurePreset": "mimxrt1024_evk" + }, + { + "name": "mimxrt1050_evkb", + "description": "Build preset for the mimxrt1050_evkb board", + "configurePreset": "mimxrt1050_evkb" + }, + { + "name": "mimxrt1060_evk", + "description": "Build preset for the mimxrt1060_evk board", + "configurePreset": "mimxrt1060_evk" + }, + { + "name": "mimxrt1064_evk", + "description": "Build preset for the mimxrt1064_evk board", + "configurePreset": "mimxrt1064_evk" + }, + { + "name": "mimxrt1170_evkb", + "description": "Build preset for the mimxrt1170_evkb board", + "configurePreset": "mimxrt1170_evkb" + }, + { + "name": "teensy_40", + "description": "Build preset for the teensy_40 board", + "configurePreset": "teensy_40" + }, + { + "name": "teensy_41", + "description": "Build preset for the teensy_41 board", + "configurePreset": "teensy_41" + }, + { + "name": "frdm_k64f", + "description": "Build preset for the frdm_k64f board", + "configurePreset": "frdm_k64f" + }, + { + "name": "teensy_35", + "description": "Build preset for the teensy_35 board", + "configurePreset": "teensy_35" + }, + { + "name": "frdm_k32l2a4s", + "description": "Build preset for the frdm_k32l2a4s board", + "configurePreset": "frdm_k32l2a4s" + }, + { + "name": "frdm_k32l2b", + "description": "Build preset for the frdm_k32l2b board", + "configurePreset": "frdm_k32l2b" + }, + { + "name": "kuiic", + "description": "Build preset for the kuiic board", + "configurePreset": "kuiic" + }, + { + "name": "frdm_kl25z", + "description": "Build preset for the frdm_kl25z board", + "configurePreset": "frdm_kl25z" + }, + { + "name": "lpcxpresso11u37", + "description": "Build preset for the lpcxpresso11u37 board", + "configurePreset": "lpcxpresso11u37" + }, + { + "name": "lpcxpresso11u68", + "description": "Build preset for the lpcxpresso11u68 board", + "configurePreset": "lpcxpresso11u68" + }, + { + "name": "lpcxpresso1347", + "description": "Build preset for the lpcxpresso1347 board", + "configurePreset": "lpcxpresso1347" + }, + { + "name": "lpcxpresso1549", + "description": "Build preset for the lpcxpresso1549 board", + "configurePreset": "lpcxpresso1549" + }, + { + "name": "lpcxpresso1769", + "description": "Build preset for the lpcxpresso1769 board", + "configurePreset": "lpcxpresso1769" + }, + { + "name": "mbed1768", + "description": "Build preset for the mbed1768 board", + "configurePreset": "mbed1768" + }, + { + "name": "lpcxpresso18s37", + "description": "Build preset for the lpcxpresso18s37 board", + "configurePreset": "lpcxpresso18s37" + }, + { + "name": "mcb1800", + "description": "Build preset for the mcb1800 board", + "configurePreset": "mcb1800" + }, + { + "name": "ea4088_quickstart", + "description": "Build preset for the ea4088_quickstart board", + "configurePreset": "ea4088_quickstart" + }, + { + "name": "ea4357", + "description": "Build preset for the ea4357 board", + "configurePreset": "ea4357" + }, + { + "name": "lpcxpresso43s67", + "description": "Build preset for the lpcxpresso43s67 board", + "configurePreset": "lpcxpresso43s67" + }, + { + "name": "lpcxpresso51u68", + "description": "Build preset for the lpcxpresso51u68 board", + "configurePreset": "lpcxpresso51u68" + }, + { + "name": "lpcxpresso54114", + "description": "Build preset for the lpcxpresso54114 board", + "configurePreset": "lpcxpresso54114" + }, + { + "name": "lpcxpresso54608", + "description": "Build preset for the lpcxpresso54608 board", + "configurePreset": "lpcxpresso54608" + }, + { + "name": "lpcxpresso54628", + "description": "Build preset for the lpcxpresso54628 board", + "configurePreset": "lpcxpresso54628" + }, + { + "name": "double_m33_express", + "description": "Build preset for the double_m33_express board", + "configurePreset": "double_m33_express" + }, + { + "name": "lpcxpresso55s28", + "description": "Build preset for the lpcxpresso55s28 board", + "configurePreset": "lpcxpresso55s28" + }, + { + "name": "lpcxpresso55s69", + "description": "Build preset for the lpcxpresso55s69 board", + "configurePreset": "lpcxpresso55s69" + }, + { + "name": "mcu_link", + "description": "Build preset for the mcu_link board", + "configurePreset": "mcu_link" + }, + { + "name": "max32650evkit", + "description": "Build preset for the max32650evkit board", + "configurePreset": "max32650evkit" + }, + { + "name": "max32650fthr", + "description": "Build preset for the max32650fthr board", + "configurePreset": "max32650fthr" + }, + { + "name": "max32651evkit", + "description": "Build preset for the max32651evkit board", + "configurePreset": "max32651evkit" + }, + { + "name": "max32666evkit", + "description": "Build preset for the max32666evkit board", + "configurePreset": "max32666evkit" + }, + { + "name": "max32666fthr", + "description": "Build preset for the max32666fthr board", + "configurePreset": "max32666fthr" + }, + { + "name": "apard32690", + "description": "Build preset for the apard32690 board", + "configurePreset": "apard32690" + }, + { + "name": "max32690evkit", + "description": "Build preset for the max32690evkit board", + "configurePreset": "max32690evkit" + }, + { + "name": "max78002evkit", + "description": "Build preset for the max78002evkit board", + "configurePreset": "max78002evkit" + }, + { + "name": "frdm_mcxa153", + "description": "Build preset for the frdm_mcxa153 board", + "configurePreset": "frdm_mcxa153" + }, + { + "name": "frdm_mcxn947", + "description": "Build preset for the frdm_mcxn947 board", + "configurePreset": "frdm_mcxn947" + }, + { + "name": "mcxn947brk", + "description": "Build preset for the mcxn947brk board", + "configurePreset": "mcxn947brk" + }, + { + "name": "mm32f327x_mb39", + "description": "Build preset for the mm32f327x_mb39 board", + "configurePreset": "mm32f327x_mb39" + }, + { + "name": "mm32f327x_pitaya_lite", + "description": "Build preset for the mm32f327x_pitaya_lite board", + "configurePreset": "mm32f327x_pitaya_lite" + }, + { + "name": "msp_exp430f5529lp", + "description": "Build preset for the msp_exp430f5529lp board", + "configurePreset": "msp_exp430f5529lp" + }, + { + "name": "msp_exp432e401y", + "description": "Build preset for the msp_exp432e401y board", + "configurePreset": "msp_exp432e401y" + }, + { + "name": "adafruit_clue", + "description": "Build preset for the adafruit_clue board", + "configurePreset": "adafruit_clue" + }, + { + "name": "arduino_nano33_ble", + "description": "Build preset for the arduino_nano33_ble board", + "configurePreset": "arduino_nano33_ble" + }, + { + "name": "circuitplayground_bluefruit", + "description": "Build preset for the circuitplayground_bluefruit board", + "configurePreset": "circuitplayground_bluefruit" + }, + { + "name": "feather_nrf52840_express", + "description": "Build preset for the feather_nrf52840_express board", + "configurePreset": "feather_nrf52840_express" + }, + { + "name": "feather_nrf52840_sense", + "description": "Build preset for the feather_nrf52840_sense board", + "configurePreset": "feather_nrf52840_sense" + }, + { + "name": "itsybitsy_nrf52840", + "description": "Build preset for the itsybitsy_nrf52840 board", + "configurePreset": "itsybitsy_nrf52840" + }, + { + "name": "pca10056", + "description": "Build preset for the pca10056 board", + "configurePreset": "pca10056" + }, + { + "name": "pca10059", + "description": "Build preset for the pca10059 board", + "configurePreset": "pca10059" + }, + { + "name": "pca10095", + "description": "Build preset for the pca10095 board", + "configurePreset": "pca10095" + }, + { + "name": "pca10100", + "description": "Build preset for the pca10100 board", + "configurePreset": "pca10100" + }, + { + "name": "portenta_c33", + "description": "Build preset for the portenta_c33 board", + "configurePreset": "portenta_c33" + }, + { + "name": "ra2a1_ek", + "description": "Build preset for the ra2a1_ek board", + "configurePreset": "ra2a1_ek" + }, + { + "name": "ra4m1_ek", + "description": "Build preset for the ra4m1_ek board", + "configurePreset": "ra4m1_ek" + }, + { + "name": "ra4m3_ek", + "description": "Build preset for the ra4m3_ek board", + "configurePreset": "ra4m3_ek" + }, + { + "name": "ra6m1_ek", + "description": "Build preset for the ra6m1_ek board", + "configurePreset": "ra6m1_ek" + }, + { + "name": "ra6m5_ek", + "description": "Build preset for the ra6m5_ek board", + "configurePreset": "ra6m5_ek" + }, + { + "name": "ra8m1_ek", + "description": "Build preset for the ra8m1_ek board", + "configurePreset": "ra8m1_ek" + }, + { + "name": "uno_r4", + "description": "Build preset for the uno_r4 board", + "configurePreset": "uno_r4" + }, + { + "name": "feather_rp2040_max3421", + "description": "Build preset for the feather_rp2040_max3421 board", + "configurePreset": "feather_rp2040_max3421" + }, + { + "name": "pico_sdk", + "description": "Build preset for the pico_sdk board", + "configurePreset": "pico_sdk" + }, + { + "name": "raspberry_pi_pico", + "description": "Build preset for the raspberry_pi_pico board", + "configurePreset": "raspberry_pi_pico" + }, + { + "name": "raspberry_pi_pico2", + "description": "Build preset for the raspberry_pi_pico2 board", + "configurePreset": "raspberry_pi_pico2" + }, + { + "name": "cynthion_d11", + "description": "Build preset for the cynthion_d11 board", + "configurePreset": "cynthion_d11" + }, + { + "name": "samd11_xplained", + "description": "Build preset for the samd11_xplained board", + "configurePreset": "samd11_xplained" + }, + { + "name": "atsamd21_xpro", + "description": "Build preset for the atsamd21_xpro board", + "configurePreset": "atsamd21_xpro" + }, + { + "name": "circuitplayground_express", + "description": "Build preset for the circuitplayground_express board", + "configurePreset": "circuitplayground_express" + }, + { + "name": "curiosity_nano", + "description": "Build preset for the curiosity_nano board", + "configurePreset": "curiosity_nano" + }, + { + "name": "cynthion_d21", + "description": "Build preset for the cynthion_d21 board", + "configurePreset": "cynthion_d21" + }, + { + "name": "feather_m0_express", + "description": "Build preset for the feather_m0_express board", + "configurePreset": "feather_m0_express" + }, + { + "name": "itsybitsy_m0", + "description": "Build preset for the itsybitsy_m0 board", + "configurePreset": "itsybitsy_m0" + }, + { + "name": "metro_m0_express", + "description": "Build preset for the metro_m0_express board", + "configurePreset": "metro_m0_express" + }, + { + "name": "qtpy", + "description": "Build preset for the qtpy board", + "configurePreset": "qtpy" + }, + { + "name": "seeeduino_xiao", + "description": "Build preset for the seeeduino_xiao board", + "configurePreset": "seeeduino_xiao" + }, + { + "name": "sparkfun_samd21_mini_usb", + "description": "Build preset for the sparkfun_samd21_mini_usb board", + "configurePreset": "sparkfun_samd21_mini_usb" + }, + { + "name": "trinket_m0", + "description": "Build preset for the trinket_m0 board", + "configurePreset": "trinket_m0" + }, + { + "name": "d5035_01", + "description": "Build preset for the d5035_01 board", + "configurePreset": "d5035_01" + }, + { + "name": "feather_m4_express", + "description": "Build preset for the feather_m4_express board", + "configurePreset": "feather_m4_express" + }, + { + "name": "itsybitsy_m4", + "description": "Build preset for the itsybitsy_m4 board", + "configurePreset": "itsybitsy_m4" + }, + { + "name": "metro_m4_express", + "description": "Build preset for the metro_m4_express board", + "configurePreset": "metro_m4_express" + }, + { + "name": "pybadge", + "description": "Build preset for the pybadge board", + "configurePreset": "pybadge" + }, + { + "name": "pyportal", + "description": "Build preset for the pyportal board", + "configurePreset": "pyportal" + }, + { + "name": "same54_xplained", + "description": "Build preset for the same54_xplained board", + "configurePreset": "same54_xplained" + }, + { + "name": "samg55_xplained", + "description": "Build preset for the samg55_xplained board", + "configurePreset": "samg55_xplained" + }, + { + "name": "atsaml21_xpro", + "description": "Build preset for the atsaml21_xpro board", + "configurePreset": "atsaml21_xpro" + }, + { + "name": "saml22_feather", + "description": "Build preset for the saml22_feather board", + "configurePreset": "saml22_feather" + }, + { + "name": "sensorwatch_m0", + "description": "Build preset for the sensorwatch_m0 board", + "configurePreset": "sensorwatch_m0" + }, + { + "name": "stm32c071nucleo", + "description": "Build preset for the stm32c071nucleo board", + "configurePreset": "stm32c071nucleo" + }, + { + "name": "stm32f070rbnucleo", + "description": "Build preset for the stm32f070rbnucleo board", + "configurePreset": "stm32f070rbnucleo" + }, + { + "name": "stm32f072disco", + "description": "Build preset for the stm32f072disco board", + "configurePreset": "stm32f072disco" + }, + { + "name": "stm32f072eval", + "description": "Build preset for the stm32f072eval board", + "configurePreset": "stm32f072eval" + }, + { + "name": "stm32f103ze_iar", + "description": "Build preset for the stm32f103ze_iar board", + "configurePreset": "stm32f103ze_iar" + }, + { + "name": "stm32f103_bluepill", + "description": "Build preset for the stm32f103_bluepill board", + "configurePreset": "stm32f103_bluepill" + }, + { + "name": "stm32f103_mini_2", + "description": "Build preset for the stm32f103_mini_2 board", + "configurePreset": "stm32f103_mini_2" + }, + { + "name": "stm32f207nucleo", + "description": "Build preset for the stm32f207nucleo board", + "configurePreset": "stm32f207nucleo" + }, + { + "name": "stm32f303disco", + "description": "Build preset for the stm32f303disco board", + "configurePreset": "stm32f303disco" + }, + { + "name": "feather_stm32f405", + "description": "Build preset for the feather_stm32f405 board", + "configurePreset": "feather_stm32f405" + }, + { + "name": "pyboardv11", + "description": "Build preset for the pyboardv11 board", + "configurePreset": "pyboardv11" + }, + { + "name": "stm32f401blackpill", + "description": "Build preset for the stm32f401blackpill board", + "configurePreset": "stm32f401blackpill" + }, + { + "name": "stm32f407blackvet", + "description": "Build preset for the stm32f407blackvet board", + "configurePreset": "stm32f407blackvet" + }, + { + "name": "stm32f407disco", + "description": "Build preset for the stm32f407disco board", + "configurePreset": "stm32f407disco" + }, + { + "name": "stm32f411blackpill", + "description": "Build preset for the stm32f411blackpill board", + "configurePreset": "stm32f411blackpill" + }, + { + "name": "stm32f411disco", + "description": "Build preset for the stm32f411disco board", + "configurePreset": "stm32f411disco" + }, + { + "name": "stm32f412disco", + "description": "Build preset for the stm32f412disco board", + "configurePreset": "stm32f412disco" + }, + { + "name": "stm32f412nucleo", + "description": "Build preset for the stm32f412nucleo board", + "configurePreset": "stm32f412nucleo" + }, + { + "name": "stm32f439nucleo", + "description": "Build preset for the stm32f439nucleo board", + "configurePreset": "stm32f439nucleo" + }, + { + "name": "stlinkv3mini", + "description": "Build preset for the stlinkv3mini board", + "configurePreset": "stlinkv3mini" + }, + { + "name": "stm32f723disco", + "description": "Build preset for the stm32f723disco board", + "configurePreset": "stm32f723disco" + }, + { + "name": "stm32f746disco", + "description": "Build preset for the stm32f746disco board", + "configurePreset": "stm32f746disco" + }, + { + "name": "stm32f746nucleo", + "description": "Build preset for the stm32f746nucleo board", + "configurePreset": "stm32f746nucleo" + }, + { + "name": "stm32f767nucleo", + "description": "Build preset for the stm32f767nucleo board", + "configurePreset": "stm32f767nucleo" + }, + { + "name": "stm32f769disco", + "description": "Build preset for the stm32f769disco board", + "configurePreset": "stm32f769disco" + }, + { + "name": "stm32g0b1nucleo", + "description": "Build preset for the stm32g0b1nucleo board", + "configurePreset": "stm32g0b1nucleo" + }, + { + "name": "b_g474e_dpow1", + "description": "Build preset for the b_g474e_dpow1 board", + "configurePreset": "b_g474e_dpow1" + }, + { + "name": "stm32g474nucleo", + "description": "Build preset for the stm32g474nucleo board", + "configurePreset": "stm32g474nucleo" + }, + { + "name": "stm32g491nucleo", + "description": "Build preset for the stm32g491nucleo board", + "configurePreset": "stm32g491nucleo" + }, + { + "name": "stm32h503nucleo", + "description": "Build preset for the stm32h503nucleo board", + "configurePreset": "stm32h503nucleo" + }, + { + "name": "stm32h563nucleo", + "description": "Build preset for the stm32h563nucleo board", + "configurePreset": "stm32h563nucleo" + }, + { + "name": "stm32h573i_dk", + "description": "Build preset for the stm32h573i_dk board", + "configurePreset": "stm32h573i_dk" + }, + { + "name": "daisyseed", + "description": "Build preset for the daisyseed board", + "configurePreset": "daisyseed" + }, + { + "name": "stm32h723nucleo", + "description": "Build preset for the stm32h723nucleo board", + "configurePreset": "stm32h723nucleo" + }, + { + "name": "stm32h743eval", + "description": "Build preset for the stm32h743eval board", + "configurePreset": "stm32h743eval" + }, + { + "name": "stm32h743nucleo", + "description": "Build preset for the stm32h743nucleo board", + "configurePreset": "stm32h743nucleo" + }, + { + "name": "stm32h745disco", + "description": "Build preset for the stm32h745disco board", + "configurePreset": "stm32h745disco" + }, + { + "name": "stm32h750bdk", + "description": "Build preset for the stm32h750bdk board", + "configurePreset": "stm32h750bdk" + }, + { + "name": "stm32h750_weact", + "description": "Build preset for the stm32h750_weact board", + "configurePreset": "stm32h750_weact" + }, + { + "name": "waveshare_openh743i", + "description": "Build preset for the waveshare_openh743i board", + "configurePreset": "waveshare_openh743i" + }, + { + "name": "stm32h7s3nucleo", + "description": "Build preset for the stm32h7s3nucleo board", + "configurePreset": "stm32h7s3nucleo" + }, + { + "name": "stm32l052dap52", + "description": "Build preset for the stm32l052dap52 board", + "configurePreset": "stm32l052dap52" + }, + { + "name": "stm32l0538disco", + "description": "Build preset for the stm32l0538disco board", + "configurePreset": "stm32l0538disco" + }, + { + "name": "stm32l412nucleo", + "description": "Build preset for the stm32l412nucleo board", + "configurePreset": "stm32l412nucleo" + }, + { + "name": "stm32l476disco", + "description": "Build preset for the stm32l476disco board", + "configurePreset": "stm32l476disco" + }, + { + "name": "stm32l4p5nucleo", + "description": "Build preset for the stm32l4p5nucleo board", + "configurePreset": "stm32l4p5nucleo" + }, + { + "name": "stm32l4r5nucleo", + "description": "Build preset for the stm32l4r5nucleo board", + "configurePreset": "stm32l4r5nucleo" + }, + { + "name": "b_u585i_iot2a", + "description": "Build preset for the b_u585i_iot2a board", + "configurePreset": "b_u585i_iot2a" + }, + { + "name": "stm32u545nucleo", + "description": "Build preset for the stm32u545nucleo board", + "configurePreset": "stm32u545nucleo" + }, + { + "name": "stm32u575eval", + "description": "Build preset for the stm32u575eval board", + "configurePreset": "stm32u575eval" + }, + { + "name": "stm32u575nucleo", + "description": "Build preset for the stm32u575nucleo board", + "configurePreset": "stm32u575nucleo" + }, + { + "name": "stm32u5a5nucleo", + "description": "Build preset for the stm32u5a5nucleo board", + "configurePreset": "stm32u5a5nucleo" + }, + { + "name": "stm32wb55nucleo", + "description": "Build preset for the stm32wb55nucleo board", + "configurePreset": "stm32wb55nucleo" + }, + { + "name": "ek_tm4c123gxl", + "description": "Build preset for the ek_tm4c123gxl board", + "configurePreset": "ek_tm4c123gxl" + }, + { + "name": "xmc4500_relax", + "description": "Build preset for the xmc4500_relax board", + "configurePreset": "xmc4500_relax" + }, + { + "name": "xmc4700_relax", + "description": "Build preset for the xmc4700_relax board", + "configurePreset": "xmc4700_relax" + } + ], + "workflowPresets": [ + { + "name": "raspberrypi_zero", + "steps": [ + { + "type": "configure", + "name": "raspberrypi_zero" + }, + { + "type": "build", + "name": "raspberrypi_zero" + } + ] + }, + { + "name": "raspberrypi_cm4", + "steps": [ + { + "type": "configure", + "name": "raspberrypi_cm4" + }, + { + "type": "build", + "name": "raspberrypi_cm4" + } + ] + }, + { + "name": "raspberrypi_zero2", + "steps": [ + { + "type": "configure", + "name": "raspberrypi_zero2" + }, + { + "type": "build", + "name": "raspberrypi_zero2" + } + ] + }, + { + "name": "ch32v103r_r1_1v0", + "steps": [ + { + "type": "configure", + "name": "ch32v103r_r1_1v0" + }, + { + "type": "build", + "name": "ch32v103r_r1_1v0" + } + ] + }, + { + "name": "ch32v203c_r0_1v0", + "steps": [ + { + "type": "configure", + "name": "ch32v203c_r0_1v0" + }, + { + "type": "build", + "name": "ch32v203c_r0_1v0" + } + ] + }, + { + "name": "ch32v203g_r0_1v0", + "steps": [ + { + "type": "configure", + "name": "ch32v203g_r0_1v0" + }, + { + "type": "build", + "name": "ch32v203g_r0_1v0" + } + ] + }, + { + "name": "nanoch32v203", + "steps": [ + { + "type": "configure", + "name": "nanoch32v203" + }, + { + "type": "build", + "name": "nanoch32v203" + } + ] + }, + { + "name": "ch32v307v_r1_1v0", + "steps": [ + { + "type": "configure", + "name": "ch32v307v_r1_1v0" + }, + { + "type": "build", + "name": "ch32v307v_r1_1v0" + } + ] + }, + { + "name": "da14695_dk_usb", + "steps": [ + { + "type": "configure", + "name": "da14695_dk_usb" + }, + { + "type": "build", + "name": "da14695_dk_usb" + } + ] + }, + { + "name": "da1469x_dk_pro", + "steps": [ + { + "type": "configure", + "name": "da1469x_dk_pro" + }, + { + "type": "build", + "name": "da1469x_dk_pro" + } + ] + }, + { + "name": "adafruit_feather_esp32s2", + "steps": [ + { + "type": "configure", + "name": "adafruit_feather_esp32s2" + }, + { + "type": "build", + "name": "adafruit_feather_esp32s2" + } + ] + }, + { + "name": "adafruit_feather_esp32s3", + "steps": [ + { + "type": "configure", + "name": "adafruit_feather_esp32s3" + }, + { + "type": "build", + "name": "adafruit_feather_esp32s3" + } + ] + }, + { + "name": "adafruit_feather_esp32_v2", + "steps": [ + { + "type": "configure", + "name": "adafruit_feather_esp32_v2" + }, + { + "type": "build", + "name": "adafruit_feather_esp32_v2" + } + ] + }, + { + "name": "adafruit_magtag_29gray", + "steps": [ + { + "type": "configure", + "name": "adafruit_magtag_29gray" + }, + { + "type": "build", + "name": "adafruit_magtag_29gray" + } + ] + }, + { + "name": "adafruit_metro_esp32s2", + "steps": [ + { + "type": "configure", + "name": "adafruit_metro_esp32s2" + }, + { + "type": "build", + "name": "adafruit_metro_esp32s2" + } + ] + }, + { + "name": "espressif_addax_1", + "steps": [ + { + "type": "configure", + "name": "espressif_addax_1" + }, + { + "type": "build", + "name": "espressif_addax_1" + } + ] + }, + { + "name": "espressif_c3_devkitc", + "steps": [ + { + "type": "configure", + "name": "espressif_c3_devkitc" + }, + { + "type": "build", + "name": "espressif_c3_devkitc" + } + ] + }, + { + "name": "espressif_c6_devkitc", + "steps": [ + { + "type": "configure", + "name": "espressif_c6_devkitc" + }, + { + "type": "build", + "name": "espressif_c6_devkitc" + } + ] + }, + { + "name": "espressif_kaluga_1", + "steps": [ + { + "type": "configure", + "name": "espressif_kaluga_1" + }, + { + "type": "build", + "name": "espressif_kaluga_1" + } + ] + }, + { + "name": "espressif_p4_function_ev", + "steps": [ + { + "type": "configure", + "name": "espressif_p4_function_ev" + }, + { + "type": "build", + "name": "espressif_p4_function_ev" + } + ] + }, + { + "name": "espressif_s2_devkitc", + "steps": [ + { + "type": "configure", + "name": "espressif_s2_devkitc" + }, + { + "type": "build", + "name": "espressif_s2_devkitc" + } + ] + }, + { + "name": "espressif_s3_devkitc", + "steps": [ + { + "type": "configure", + "name": "espressif_s3_devkitc" + }, + { + "type": "build", + "name": "espressif_s3_devkitc" + } + ] + }, + { + "name": "espressif_s3_devkitm", + "steps": [ + { + "type": "configure", + "name": "espressif_s3_devkitm" + }, + { + "type": "build", + "name": "espressif_s3_devkitm" + } + ] + }, + { + "name": "espressif_saola_1", + "steps": [ + { + "type": "configure", + "name": "espressif_saola_1" + }, + { + "type": "build", + "name": "espressif_saola_1" + } + ] + }, + { + "name": "f1c100s", + "steps": [ + { + "type": "configure", + "name": "f1c100s" + }, + { + "type": "build", + "name": "f1c100s" + } + ] + }, + { + "name": "fomu", + "steps": [ + { + "type": "configure", + "name": "fomu" + }, + { + "type": "build", + "name": "fomu" + } + ] + }, + { + "name": "sipeed_longan_nano", + "steps": [ + { + "type": "configure", + "name": "sipeed_longan_nano" + }, + { + "type": "build", + "name": "sipeed_longan_nano" + } + ] + }, + { + "name": "metro_m7_1011", + "steps": [ + { + "type": "configure", + "name": "metro_m7_1011" + }, + { + "type": "build", + "name": "metro_m7_1011" + } + ] + }, + { + "name": "metro_m7_1011_sd", + "steps": [ + { + "type": "configure", + "name": "metro_m7_1011_sd" + }, + { + "type": "build", + "name": "metro_m7_1011_sd" + } + ] + }, + { + "name": "mimxrt1010_evk", + "steps": [ + { + "type": "configure", + "name": "mimxrt1010_evk" + }, + { + "type": "build", + "name": "mimxrt1010_evk" + } + ] + }, + { + "name": "mimxrt1015_evk", + "steps": [ + { + "type": "configure", + "name": "mimxrt1015_evk" + }, + { + "type": "build", + "name": "mimxrt1015_evk" + } + ] + }, + { + "name": "mimxrt1020_evk", + "steps": [ + { + "type": "configure", + "name": "mimxrt1020_evk" + }, + { + "type": "build", + "name": "mimxrt1020_evk" + } + ] + }, + { + "name": "mimxrt1024_evk", + "steps": [ + { + "type": "configure", + "name": "mimxrt1024_evk" + }, + { + "type": "build", + "name": "mimxrt1024_evk" + } + ] + }, + { + "name": "mimxrt1050_evkb", + "steps": [ + { + "type": "configure", + "name": "mimxrt1050_evkb" + }, + { + "type": "build", + "name": "mimxrt1050_evkb" + } + ] + }, + { + "name": "mimxrt1060_evk", + "steps": [ + { + "type": "configure", + "name": "mimxrt1060_evk" + }, + { + "type": "build", + "name": "mimxrt1060_evk" + } + ] + }, + { + "name": "mimxrt1064_evk", + "steps": [ + { + "type": "configure", + "name": "mimxrt1064_evk" + }, + { + "type": "build", + "name": "mimxrt1064_evk" + } + ] + }, + { + "name": "mimxrt1170_evkb", + "steps": [ + { + "type": "configure", + "name": "mimxrt1170_evkb" + }, + { + "type": "build", + "name": "mimxrt1170_evkb" + } + ] + }, + { + "name": "teensy_40", + "steps": [ + { + "type": "configure", + "name": "teensy_40" + }, + { + "type": "build", + "name": "teensy_40" + } + ] + }, + { + "name": "teensy_41", + "steps": [ + { + "type": "configure", + "name": "teensy_41" + }, + { + "type": "build", + "name": "teensy_41" + } + ] + }, + { + "name": "frdm_k64f", + "steps": [ + { + "type": "configure", + "name": "frdm_k64f" + }, + { + "type": "build", + "name": "frdm_k64f" + } + ] + }, + { + "name": "teensy_35", + "steps": [ + { + "type": "configure", + "name": "teensy_35" + }, + { + "type": "build", + "name": "teensy_35" + } + ] + }, + { + "name": "frdm_k32l2a4s", + "steps": [ + { + "type": "configure", + "name": "frdm_k32l2a4s" + }, + { + "type": "build", + "name": "frdm_k32l2a4s" + } + ] + }, + { + "name": "frdm_k32l2b", + "steps": [ + { + "type": "configure", + "name": "frdm_k32l2b" + }, + { + "type": "build", + "name": "frdm_k32l2b" + } + ] + }, + { + "name": "kuiic", + "steps": [ + { + "type": "configure", + "name": "kuiic" + }, + { + "type": "build", + "name": "kuiic" + } + ] + }, + { + "name": "frdm_kl25z", + "steps": [ + { + "type": "configure", + "name": "frdm_kl25z" + }, + { + "type": "build", + "name": "frdm_kl25z" + } + ] + }, + { + "name": "lpcxpresso11u37", + "steps": [ + { + "type": "configure", + "name": "lpcxpresso11u37" + }, + { + "type": "build", + "name": "lpcxpresso11u37" + } + ] + }, + { + "name": "lpcxpresso11u68", + "steps": [ + { + "type": "configure", + "name": "lpcxpresso11u68" + }, + { + "type": "build", + "name": "lpcxpresso11u68" + } + ] + }, + { + "name": "lpcxpresso1347", + "steps": [ + { + "type": "configure", + "name": "lpcxpresso1347" + }, + { + "type": "build", + "name": "lpcxpresso1347" + } + ] + }, + { + "name": "lpcxpresso1549", + "steps": [ + { + "type": "configure", + "name": "lpcxpresso1549" + }, + { + "type": "build", + "name": "lpcxpresso1549" + } + ] + }, + { + "name": "lpcxpresso1769", + "steps": [ + { + "type": "configure", + "name": "lpcxpresso1769" + }, + { + "type": "build", + "name": "lpcxpresso1769" + } + ] + }, + { + "name": "mbed1768", + "steps": [ + { + "type": "configure", + "name": "mbed1768" + }, + { + "type": "build", + "name": "mbed1768" + } + ] + }, + { + "name": "lpcxpresso18s37", + "steps": [ + { + "type": "configure", + "name": "lpcxpresso18s37" + }, + { + "type": "build", + "name": "lpcxpresso18s37" + } + ] + }, + { + "name": "mcb1800", + "steps": [ + { + "type": "configure", + "name": "mcb1800" + }, + { + "type": "build", + "name": "mcb1800" + } + ] + }, + { + "name": "ea4088_quickstart", + "steps": [ + { + "type": "configure", + "name": "ea4088_quickstart" + }, + { + "type": "build", + "name": "ea4088_quickstart" + } + ] + }, + { + "name": "ea4357", + "steps": [ + { + "type": "configure", + "name": "ea4357" + }, + { + "type": "build", + "name": "ea4357" + } + ] + }, + { + "name": "lpcxpresso43s67", + "steps": [ + { + "type": "configure", + "name": "lpcxpresso43s67" + }, + { + "type": "build", + "name": "lpcxpresso43s67" + } + ] + }, + { + "name": "lpcxpresso51u68", + "steps": [ + { + "type": "configure", + "name": "lpcxpresso51u68" + }, + { + "type": "build", + "name": "lpcxpresso51u68" + } + ] + }, + { + "name": "lpcxpresso54114", + "steps": [ + { + "type": "configure", + "name": "lpcxpresso54114" + }, + { + "type": "build", + "name": "lpcxpresso54114" + } + ] + }, + { + "name": "lpcxpresso54608", + "steps": [ + { + "type": "configure", + "name": "lpcxpresso54608" + }, + { + "type": "build", + "name": "lpcxpresso54608" + } + ] + }, + { + "name": "lpcxpresso54628", + "steps": [ + { + "type": "configure", + "name": "lpcxpresso54628" + }, + { + "type": "build", + "name": "lpcxpresso54628" + } + ] + }, + { + "name": "double_m33_express", + "steps": [ + { + "type": "configure", + "name": "double_m33_express" + }, + { + "type": "build", + "name": "double_m33_express" + } + ] + }, + { + "name": "lpcxpresso55s28", + "steps": [ + { + "type": "configure", + "name": "lpcxpresso55s28" + }, + { + "type": "build", + "name": "lpcxpresso55s28" + } + ] + }, + { + "name": "lpcxpresso55s69", + "steps": [ + { + "type": "configure", + "name": "lpcxpresso55s69" + }, + { + "type": "build", + "name": "lpcxpresso55s69" + } + ] + }, + { + "name": "mcu_link", + "steps": [ + { + "type": "configure", + "name": "mcu_link" + }, + { + "type": "build", + "name": "mcu_link" + } + ] + }, + { + "name": "max32650evkit", + "steps": [ + { + "type": "configure", + "name": "max32650evkit" + }, + { + "type": "build", + "name": "max32650evkit" + } + ] + }, + { + "name": "max32650fthr", + "steps": [ + { + "type": "configure", + "name": "max32650fthr" + }, + { + "type": "build", + "name": "max32650fthr" + } + ] + }, + { + "name": "max32651evkit", + "steps": [ + { + "type": "configure", + "name": "max32651evkit" + }, + { + "type": "build", + "name": "max32651evkit" + } + ] + }, + { + "name": "max32666evkit", + "steps": [ + { + "type": "configure", + "name": "max32666evkit" + }, + { + "type": "build", + "name": "max32666evkit" + } + ] + }, + { + "name": "max32666fthr", + "steps": [ + { + "type": "configure", + "name": "max32666fthr" + }, + { + "type": "build", + "name": "max32666fthr" + } + ] + }, + { + "name": "apard32690", + "steps": [ + { + "type": "configure", + "name": "apard32690" + }, + { + "type": "build", + "name": "apard32690" + } + ] + }, + { + "name": "max32690evkit", + "steps": [ + { + "type": "configure", + "name": "max32690evkit" + }, + { + "type": "build", + "name": "max32690evkit" + } + ] + }, + { + "name": "max78002evkit", + "steps": [ + { + "type": "configure", + "name": "max78002evkit" + }, + { + "type": "build", + "name": "max78002evkit" + } + ] + }, + { + "name": "frdm_mcxa153", + "steps": [ + { + "type": "configure", + "name": "frdm_mcxa153" + }, + { + "type": "build", + "name": "frdm_mcxa153" + } + ] + }, + { + "name": "frdm_mcxn947", + "steps": [ + { + "type": "configure", + "name": "frdm_mcxn947" + }, + { + "type": "build", + "name": "frdm_mcxn947" + } + ] + }, + { + "name": "mcxn947brk", + "steps": [ + { + "type": "configure", + "name": "mcxn947brk" + }, + { + "type": "build", + "name": "mcxn947brk" + } + ] + }, + { + "name": "mm32f327x_mb39", + "steps": [ + { + "type": "configure", + "name": "mm32f327x_mb39" + }, + { + "type": "build", + "name": "mm32f327x_mb39" + } + ] + }, + { + "name": "mm32f327x_pitaya_lite", + "steps": [ + { + "type": "configure", + "name": "mm32f327x_pitaya_lite" + }, + { + "type": "build", + "name": "mm32f327x_pitaya_lite" + } + ] + }, + { + "name": "msp_exp430f5529lp", + "steps": [ + { + "type": "configure", + "name": "msp_exp430f5529lp" + }, + { + "type": "build", + "name": "msp_exp430f5529lp" + } + ] + }, + { + "name": "msp_exp432e401y", + "steps": [ + { + "type": "configure", + "name": "msp_exp432e401y" + }, + { + "type": "build", + "name": "msp_exp432e401y" + } + ] + }, + { + "name": "adafruit_clue", + "steps": [ + { + "type": "configure", + "name": "adafruit_clue" + }, + { + "type": "build", + "name": "adafruit_clue" + } + ] + }, + { + "name": "arduino_nano33_ble", + "steps": [ + { + "type": "configure", + "name": "arduino_nano33_ble" + }, + { + "type": "build", + "name": "arduino_nano33_ble" + } + ] + }, + { + "name": "circuitplayground_bluefruit", + "steps": [ + { + "type": "configure", + "name": "circuitplayground_bluefruit" + }, + { + "type": "build", + "name": "circuitplayground_bluefruit" + } + ] + }, + { + "name": "feather_nrf52840_express", + "steps": [ + { + "type": "configure", + "name": "feather_nrf52840_express" + }, + { + "type": "build", + "name": "feather_nrf52840_express" + } + ] + }, + { + "name": "feather_nrf52840_sense", + "steps": [ + { + "type": "configure", + "name": "feather_nrf52840_sense" + }, + { + "type": "build", + "name": "feather_nrf52840_sense" + } + ] + }, + { + "name": "itsybitsy_nrf52840", + "steps": [ + { + "type": "configure", + "name": "itsybitsy_nrf52840" + }, + { + "type": "build", + "name": "itsybitsy_nrf52840" + } + ] + }, + { + "name": "pca10056", + "steps": [ + { + "type": "configure", + "name": "pca10056" + }, + { + "type": "build", + "name": "pca10056" + } + ] + }, + { + "name": "pca10059", + "steps": [ + { + "type": "configure", + "name": "pca10059" + }, + { + "type": "build", + "name": "pca10059" + } + ] + }, + { + "name": "pca10095", + "steps": [ + { + "type": "configure", + "name": "pca10095" + }, + { + "type": "build", + "name": "pca10095" + } + ] + }, + { + "name": "pca10100", + "steps": [ + { + "type": "configure", + "name": "pca10100" + }, + { + "type": "build", + "name": "pca10100" + } + ] + }, + { + "name": "portenta_c33", + "steps": [ + { + "type": "configure", + "name": "portenta_c33" + }, + { + "type": "build", + "name": "portenta_c33" + } + ] + }, + { + "name": "ra2a1_ek", + "steps": [ + { + "type": "configure", + "name": "ra2a1_ek" + }, + { + "type": "build", + "name": "ra2a1_ek" + } + ] + }, + { + "name": "ra4m1_ek", + "steps": [ + { + "type": "configure", + "name": "ra4m1_ek" + }, + { + "type": "build", + "name": "ra4m1_ek" + } + ] + }, + { + "name": "ra4m3_ek", + "steps": [ + { + "type": "configure", + "name": "ra4m3_ek" + }, + { + "type": "build", + "name": "ra4m3_ek" + } + ] + }, + { + "name": "ra6m1_ek", + "steps": [ + { + "type": "configure", + "name": "ra6m1_ek" + }, + { + "type": "build", + "name": "ra6m1_ek" + } + ] + }, + { + "name": "ra6m5_ek", + "steps": [ + { + "type": "configure", + "name": "ra6m5_ek" + }, + { + "type": "build", + "name": "ra6m5_ek" + } + ] + }, + { + "name": "ra8m1_ek", + "steps": [ + { + "type": "configure", + "name": "ra8m1_ek" + }, + { + "type": "build", + "name": "ra8m1_ek" + } + ] + }, + { + "name": "uno_r4", + "steps": [ + { + "type": "configure", + "name": "uno_r4" + }, + { + "type": "build", + "name": "uno_r4" + } + ] + }, + { + "name": "feather_rp2040_max3421", + "steps": [ + { + "type": "configure", + "name": "feather_rp2040_max3421" + }, + { + "type": "build", + "name": "feather_rp2040_max3421" + } + ] + }, + { + "name": "pico_sdk", + "steps": [ + { + "type": "configure", + "name": "pico_sdk" + }, + { + "type": "build", + "name": "pico_sdk" + } + ] + }, + { + "name": "raspberry_pi_pico", + "steps": [ + { + "type": "configure", + "name": "raspberry_pi_pico" + }, + { + "type": "build", + "name": "raspberry_pi_pico" + } + ] + }, + { + "name": "raspberry_pi_pico2", + "steps": [ + { + "type": "configure", + "name": "raspberry_pi_pico2" + }, + { + "type": "build", + "name": "raspberry_pi_pico2" + } + ] + }, + { + "name": "cynthion_d11", + "steps": [ + { + "type": "configure", + "name": "cynthion_d11" + }, + { + "type": "build", + "name": "cynthion_d11" + } + ] + }, + { + "name": "samd11_xplained", + "steps": [ + { + "type": "configure", + "name": "samd11_xplained" + }, + { + "type": "build", + "name": "samd11_xplained" + } + ] + }, + { + "name": "atsamd21_xpro", + "steps": [ + { + "type": "configure", + "name": "atsamd21_xpro" + }, + { + "type": "build", + "name": "atsamd21_xpro" + } + ] + }, + { + "name": "circuitplayground_express", + "steps": [ + { + "type": "configure", + "name": "circuitplayground_express" + }, + { + "type": "build", + "name": "circuitplayground_express" + } + ] + }, + { + "name": "curiosity_nano", + "steps": [ + { + "type": "configure", + "name": "curiosity_nano" + }, + { + "type": "build", + "name": "curiosity_nano" + } + ] + }, + { + "name": "cynthion_d21", + "steps": [ + { + "type": "configure", + "name": "cynthion_d21" + }, + { + "type": "build", + "name": "cynthion_d21" + } + ] + }, + { + "name": "feather_m0_express", + "steps": [ + { + "type": "configure", + "name": "feather_m0_express" + }, + { + "type": "build", + "name": "feather_m0_express" + } + ] + }, + { + "name": "itsybitsy_m0", + "steps": [ + { + "type": "configure", + "name": "itsybitsy_m0" + }, + { + "type": "build", + "name": "itsybitsy_m0" + } + ] + }, + { + "name": "metro_m0_express", + "steps": [ + { + "type": "configure", + "name": "metro_m0_express" + }, + { + "type": "build", + "name": "metro_m0_express" + } + ] + }, + { + "name": "qtpy", + "steps": [ + { + "type": "configure", + "name": "qtpy" + }, + { + "type": "build", + "name": "qtpy" + } + ] + }, + { + "name": "seeeduino_xiao", + "steps": [ + { + "type": "configure", + "name": "seeeduino_xiao" + }, + { + "type": "build", + "name": "seeeduino_xiao" + } + ] + }, + { + "name": "sparkfun_samd21_mini_usb", + "steps": [ + { + "type": "configure", + "name": "sparkfun_samd21_mini_usb" + }, + { + "type": "build", + "name": "sparkfun_samd21_mini_usb" + } + ] + }, + { + "name": "trinket_m0", + "steps": [ + { + "type": "configure", + "name": "trinket_m0" + }, + { + "type": "build", + "name": "trinket_m0" + } + ] + }, + { + "name": "d5035_01", + "steps": [ + { + "type": "configure", + "name": "d5035_01" + }, + { + "type": "build", + "name": "d5035_01" + } + ] + }, + { + "name": "feather_m4_express", + "steps": [ + { + "type": "configure", + "name": "feather_m4_express" + }, + { + "type": "build", + "name": "feather_m4_express" + } + ] + }, + { + "name": "itsybitsy_m4", + "steps": [ + { + "type": "configure", + "name": "itsybitsy_m4" + }, + { + "type": "build", + "name": "itsybitsy_m4" + } + ] + }, + { + "name": "metro_m4_express", + "steps": [ + { + "type": "configure", + "name": "metro_m4_express" + }, + { + "type": "build", + "name": "metro_m4_express" + } + ] + }, + { + "name": "pybadge", + "steps": [ + { + "type": "configure", + "name": "pybadge" + }, + { + "type": "build", + "name": "pybadge" + } + ] + }, + { + "name": "pyportal", + "steps": [ + { + "type": "configure", + "name": "pyportal" + }, + { + "type": "build", + "name": "pyportal" + } + ] + }, + { + "name": "same54_xplained", + "steps": [ + { + "type": "configure", + "name": "same54_xplained" + }, + { + "type": "build", + "name": "same54_xplained" + } + ] + }, + { + "name": "samg55_xplained", + "steps": [ + { + "type": "configure", + "name": "samg55_xplained" + }, + { + "type": "build", + "name": "samg55_xplained" + } + ] + }, + { + "name": "atsaml21_xpro", + "steps": [ + { + "type": "configure", + "name": "atsaml21_xpro" + }, + { + "type": "build", + "name": "atsaml21_xpro" + } + ] + }, + { + "name": "saml22_feather", + "steps": [ + { + "type": "configure", + "name": "saml22_feather" + }, + { + "type": "build", + "name": "saml22_feather" + } + ] + }, + { + "name": "sensorwatch_m0", + "steps": [ + { + "type": "configure", + "name": "sensorwatch_m0" + }, + { + "type": "build", + "name": "sensorwatch_m0" + } + ] + }, + { + "name": "stm32c071nucleo", + "steps": [ + { + "type": "configure", + "name": "stm32c071nucleo" + }, + { + "type": "build", + "name": "stm32c071nucleo" + } + ] + }, + { + "name": "stm32f070rbnucleo", + "steps": [ + { + "type": "configure", + "name": "stm32f070rbnucleo" + }, + { + "type": "build", + "name": "stm32f070rbnucleo" + } + ] + }, + { + "name": "stm32f072disco", + "steps": [ + { + "type": "configure", + "name": "stm32f072disco" + }, + { + "type": "build", + "name": "stm32f072disco" + } + ] + }, + { + "name": "stm32f072eval", + "steps": [ + { + "type": "configure", + "name": "stm32f072eval" + }, + { + "type": "build", + "name": "stm32f072eval" + } + ] + }, + { + "name": "stm32f103ze_iar", + "steps": [ + { + "type": "configure", + "name": "stm32f103ze_iar" + }, + { + "type": "build", + "name": "stm32f103ze_iar" + } + ] + }, + { + "name": "stm32f103_bluepill", + "steps": [ + { + "type": "configure", + "name": "stm32f103_bluepill" + }, + { + "type": "build", + "name": "stm32f103_bluepill" + } + ] + }, + { + "name": "stm32f103_mini_2", + "steps": [ + { + "type": "configure", + "name": "stm32f103_mini_2" + }, + { + "type": "build", + "name": "stm32f103_mini_2" + } + ] + }, + { + "name": "stm32f207nucleo", + "steps": [ + { + "type": "configure", + "name": "stm32f207nucleo" + }, + { + "type": "build", + "name": "stm32f207nucleo" + } + ] + }, + { + "name": "stm32f303disco", + "steps": [ + { + "type": "configure", + "name": "stm32f303disco" + }, + { + "type": "build", + "name": "stm32f303disco" + } + ] + }, + { + "name": "feather_stm32f405", + "steps": [ + { + "type": "configure", + "name": "feather_stm32f405" + }, + { + "type": "build", + "name": "feather_stm32f405" + } + ] + }, + { + "name": "pyboardv11", + "steps": [ + { + "type": "configure", + "name": "pyboardv11" + }, + { + "type": "build", + "name": "pyboardv11" + } + ] + }, + { + "name": "stm32f401blackpill", + "steps": [ + { + "type": "configure", + "name": "stm32f401blackpill" + }, + { + "type": "build", + "name": "stm32f401blackpill" + } + ] + }, + { + "name": "stm32f407blackvet", + "steps": [ + { + "type": "configure", + "name": "stm32f407blackvet" + }, + { + "type": "build", + "name": "stm32f407blackvet" + } + ] + }, + { + "name": "stm32f407disco", + "steps": [ + { + "type": "configure", + "name": "stm32f407disco" + }, + { + "type": "build", + "name": "stm32f407disco" + } + ] + }, + { + "name": "stm32f411blackpill", + "steps": [ + { + "type": "configure", + "name": "stm32f411blackpill" + }, + { + "type": "build", + "name": "stm32f411blackpill" + } + ] + }, + { + "name": "stm32f411disco", + "steps": [ + { + "type": "configure", + "name": "stm32f411disco" + }, + { + "type": "build", + "name": "stm32f411disco" + } + ] + }, + { + "name": "stm32f412disco", + "steps": [ + { + "type": "configure", + "name": "stm32f412disco" + }, + { + "type": "build", + "name": "stm32f412disco" + } + ] + }, + { + "name": "stm32f412nucleo", + "steps": [ + { + "type": "configure", + "name": "stm32f412nucleo" + }, + { + "type": "build", + "name": "stm32f412nucleo" + } + ] + }, + { + "name": "stm32f439nucleo", + "steps": [ + { + "type": "configure", + "name": "stm32f439nucleo" + }, + { + "type": "build", + "name": "stm32f439nucleo" + } + ] + }, + { + "name": "stlinkv3mini", + "steps": [ + { + "type": "configure", + "name": "stlinkv3mini" + }, + { + "type": "build", + "name": "stlinkv3mini" + } + ] + }, + { + "name": "stm32f723disco", + "steps": [ + { + "type": "configure", + "name": "stm32f723disco" + }, + { + "type": "build", + "name": "stm32f723disco" + } + ] + }, + { + "name": "stm32f746disco", + "steps": [ + { + "type": "configure", + "name": "stm32f746disco" + }, + { + "type": "build", + "name": "stm32f746disco" + } + ] + }, + { + "name": "stm32f746nucleo", + "steps": [ + { + "type": "configure", + "name": "stm32f746nucleo" + }, + { + "type": "build", + "name": "stm32f746nucleo" + } + ] + }, + { + "name": "stm32f767nucleo", + "steps": [ + { + "type": "configure", + "name": "stm32f767nucleo" + }, + { + "type": "build", + "name": "stm32f767nucleo" + } + ] + }, + { + "name": "stm32f769disco", + "steps": [ + { + "type": "configure", + "name": "stm32f769disco" + }, + { + "type": "build", + "name": "stm32f769disco" + } + ] + }, + { + "name": "stm32g0b1nucleo", + "steps": [ + { + "type": "configure", + "name": "stm32g0b1nucleo" + }, + { + "type": "build", + "name": "stm32g0b1nucleo" + } + ] + }, + { + "name": "b_g474e_dpow1", + "steps": [ + { + "type": "configure", + "name": "b_g474e_dpow1" + }, + { + "type": "build", + "name": "b_g474e_dpow1" + } + ] + }, + { + "name": "stm32g474nucleo", + "steps": [ + { + "type": "configure", + "name": "stm32g474nucleo" + }, + { + "type": "build", + "name": "stm32g474nucleo" + } + ] + }, + { + "name": "stm32g491nucleo", + "steps": [ + { + "type": "configure", + "name": "stm32g491nucleo" + }, + { + "type": "build", + "name": "stm32g491nucleo" + } + ] + }, + { + "name": "stm32h503nucleo", + "steps": [ + { + "type": "configure", + "name": "stm32h503nucleo" + }, + { + "type": "build", + "name": "stm32h503nucleo" + } + ] + }, + { + "name": "stm32h563nucleo", + "steps": [ + { + "type": "configure", + "name": "stm32h563nucleo" + }, + { + "type": "build", + "name": "stm32h563nucleo" + } + ] + }, + { + "name": "stm32h573i_dk", + "steps": [ + { + "type": "configure", + "name": "stm32h573i_dk" + }, + { + "type": "build", + "name": "stm32h573i_dk" + } + ] + }, + { + "name": "daisyseed", + "steps": [ + { + "type": "configure", + "name": "daisyseed" + }, + { + "type": "build", + "name": "daisyseed" + } + ] + }, + { + "name": "stm32h723nucleo", + "steps": [ + { + "type": "configure", + "name": "stm32h723nucleo" + }, + { + "type": "build", + "name": "stm32h723nucleo" + } + ] + }, + { + "name": "stm32h743eval", + "steps": [ + { + "type": "configure", + "name": "stm32h743eval" + }, + { + "type": "build", + "name": "stm32h743eval" + } + ] + }, + { + "name": "stm32h743nucleo", + "steps": [ + { + "type": "configure", + "name": "stm32h743nucleo" + }, + { + "type": "build", + "name": "stm32h743nucleo" + } + ] + }, + { + "name": "stm32h745disco", + "steps": [ + { + "type": "configure", + "name": "stm32h745disco" + }, + { + "type": "build", + "name": "stm32h745disco" + } + ] + }, + { + "name": "stm32h750bdk", + "steps": [ + { + "type": "configure", + "name": "stm32h750bdk" + }, + { + "type": "build", + "name": "stm32h750bdk" + } + ] + }, + { + "name": "stm32h750_weact", + "steps": [ + { + "type": "configure", + "name": "stm32h750_weact" + }, + { + "type": "build", + "name": "stm32h750_weact" + } + ] + }, + { + "name": "waveshare_openh743i", + "steps": [ + { + "type": "configure", + "name": "waveshare_openh743i" + }, + { + "type": "build", + "name": "waveshare_openh743i" + } + ] + }, + { + "name": "stm32h7s3nucleo", + "steps": [ + { + "type": "configure", + "name": "stm32h7s3nucleo" + }, + { + "type": "build", + "name": "stm32h7s3nucleo" + } + ] + }, + { + "name": "stm32l052dap52", + "steps": [ + { + "type": "configure", + "name": "stm32l052dap52" + }, + { + "type": "build", + "name": "stm32l052dap52" + } + ] + }, + { + "name": "stm32l0538disco", + "steps": [ + { + "type": "configure", + "name": "stm32l0538disco" + }, + { + "type": "build", + "name": "stm32l0538disco" + } + ] + }, + { + "name": "stm32l412nucleo", + "steps": [ + { + "type": "configure", + "name": "stm32l412nucleo" + }, + { + "type": "build", + "name": "stm32l412nucleo" + } + ] + }, + { + "name": "stm32l476disco", + "steps": [ + { + "type": "configure", + "name": "stm32l476disco" + }, + { + "type": "build", + "name": "stm32l476disco" + } + ] + }, + { + "name": "stm32l4p5nucleo", + "steps": [ + { + "type": "configure", + "name": "stm32l4p5nucleo" + }, + { + "type": "build", + "name": "stm32l4p5nucleo" + } + ] + }, + { + "name": "stm32l4r5nucleo", + "steps": [ + { + "type": "configure", + "name": "stm32l4r5nucleo" + }, + { + "type": "build", + "name": "stm32l4r5nucleo" + } + ] + }, + { + "name": "b_u585i_iot2a", + "steps": [ + { + "type": "configure", + "name": "b_u585i_iot2a" + }, + { + "type": "build", + "name": "b_u585i_iot2a" + } + ] + }, + { + "name": "stm32u545nucleo", + "steps": [ + { + "type": "configure", + "name": "stm32u545nucleo" + }, + { + "type": "build", + "name": "stm32u545nucleo" + } + ] + }, + { + "name": "stm32u575eval", + "steps": [ + { + "type": "configure", + "name": "stm32u575eval" + }, + { + "type": "build", + "name": "stm32u575eval" + } + ] + }, + { + "name": "stm32u575nucleo", + "steps": [ + { + "type": "configure", + "name": "stm32u575nucleo" + }, + { + "type": "build", + "name": "stm32u575nucleo" + } + ] + }, + { + "name": "stm32u5a5nucleo", + "steps": [ + { + "type": "configure", + "name": "stm32u5a5nucleo" + }, + { + "type": "build", + "name": "stm32u5a5nucleo" + } + ] + }, + { + "name": "stm32wb55nucleo", + "steps": [ + { + "type": "configure", + "name": "stm32wb55nucleo" + }, + { + "type": "build", + "name": "stm32wb55nucleo" + } + ] + }, + { + "name": "ek_tm4c123gxl", + "steps": [ + { + "type": "configure", + "name": "ek_tm4c123gxl" + }, + { + "type": "build", + "name": "ek_tm4c123gxl" + } + ] + }, + { + "name": "xmc4500_relax", + "steps": [ + { + "type": "configure", + "name": "xmc4500_relax" + }, + { + "type": "build", + "name": "xmc4500_relax" + } + ] + }, + { + "name": "xmc4700_relax", + "steps": [ + { + "type": "configure", + "name": "xmc4700_relax" + }, + { + "type": "build", + "name": "xmc4700_relax" + } + ] + } + ] +} diff --git a/hw/bsp/family_support.cmake b/hw/bsp/family_support.cmake index 04d537376..409fb9c75 100644 --- a/hw/bsp/family_support.cmake +++ b/hw/bsp/family_support.cmake @@ -399,7 +399,11 @@ endfunction() # Add flash jlink target function(family_flash_jlink TARGET) if (NOT DEFINED JLINKEXE) - set(JLINKEXE JLinkExe) + if(CMAKE_HOST_WIN32) + set(JLINKEXE JLink.exe) + else() + set(JLINKEXE JLinkExe) + endif() endif () if (NOT DEFINED JLINK_IF) diff --git a/tools/gen_presets.py b/tools/gen_presets.py new file mode 100755 index 000000000..98b1a7d46 --- /dev/null +++ b/tools/gen_presets.py @@ -0,0 +1,91 @@ +#!/usr/bin/env python3 +import os +import json + + +def main(): + board_list = [] + + # Find all board.cmake files + for root, dirs, files in os.walk("hw/bsp"): + for file in files: + if file == "board.cmake": + board_list.append(os.path.basename(root)) + + print('Generating presets for the following boards:') + print(board_list) + + # Generate the presets + presets = {} + presets['version'] = 6 + + # Configure presets + presets['configurePresets'] = [ + {"name": "default", + "hidden": True, + "description": r"Configure preset for the ${presetName} board", + "generator": "Ninja", + "binaryDir": r"${sourceDir}/build/${presetName}", + "cacheVariables": { + "CMAKE_BUILD_TYPE": "RelWithDebInfo", + "BOARD": r"${presetName}" + } + }] + + presets['configurePresets'].extend( + [{'name': board, 'inherits': 'default'} for board in board_list] + ) + + # Build presets + # no inheritance since 'name' doesn't support macro expansion + presets['buildPresets'] = [ + { + 'name': board, + 'description': "Build preset for the " + board + " board", + 'configurePreset': board + } + for board in board_list + ] + + # Workflow presets + presets['workflowPresets'] = [ + { + "name": board, + "steps": [ + { + "type": "configure", + "name": board + }, + { + "type": "build", + "name": board + } + ] + } + for board in board_list + ] + + with open("hw/bsp/BoardPresets.json", "w") as f: + f.write('{}\n'.format(json.dumps(presets, indent=2))) + + # Generate presets for examples + presets = { + "version": 6, + "include": [ + "../../../hw/bsp/BoardPresets.json" + ] + } + + example_list = [] + for root, dirs, files in os.walk("examples"): + for file in files: + if file == "CMakeLists.txt": + with open(os.path.join(root, 'CMakePresets.json'), 'w') as f: + f.write('{}\n'.format(json.dumps(presets, indent=2))) + example_list.append(os.path.basename(root)) + + print('Generating presets for the following examples:') + print(example_list) + +if __name__ == "__main__": + main() -- cgit v1.3.1 From 1208f88b6ecc899bfac908aaf90a8be0997efb5d Mon Sep 17 00:00:00 2001 From: HiFiPhile Date: Sun, 9 Feb 2025 18:40:30 +0100 Subject: Sort list (bettter for Clion) Signed-off-by: HiFiPhile --- hw/bsp/BoardPresets.json | 1952 +++++++++++++++++++++++----------------------- tools/gen_presets.py | 70 +- 2 files changed, 1017 insertions(+), 1005 deletions(-) (limited to 'tools') diff --git a/hw/bsp/BoardPresets.json b/hw/bsp/BoardPresets.json index c295efbdd..fee8f2c97 100644 --- a/hw/bsp/BoardPresets.json +++ b/hw/bsp/BoardPresets.json @@ -5,175 +5,195 @@ "name": "default", "hidden": true, "description": "Configure preset for the ${presetName} board", - "generator": "Ninja", + "generator": "Ninja Multi-Config", "binaryDir": "${sourceDir}/build/${presetName}", "cacheVariables": { - "CMAKE_BUILD_TYPE": "RelWithDebInfo", + "CMAKE_DEFAULT_BUILD_TYPE": "RelWithDebInfo", "BOARD": "${presetName}" } }, { - "name": "raspberrypi_zero", + "name": "adafruit_clue", "inherits": "default" }, { - "name": "raspberrypi_cm4", + "name": "adafruit_feather_esp32_v2", "inherits": "default" }, { - "name": "raspberrypi_zero2", + "name": "adafruit_feather_esp32s2", "inherits": "default" }, { - "name": "ch32v103r_r1_1v0", + "name": "adafruit_feather_esp32s3", "inherits": "default" }, { - "name": "ch32v203c_r0_1v0", + "name": "adafruit_magtag_29gray", "inherits": "default" }, { - "name": "ch32v203g_r0_1v0", + "name": "adafruit_metro_esp32s2", "inherits": "default" }, { - "name": "nanoch32v203", + "name": "apard32690", "inherits": "default" }, { - "name": "ch32v307v_r1_1v0", + "name": "arduino_nano33_ble", "inherits": "default" }, { - "name": "da14695_dk_usb", + "name": "atsamd21_xpro", "inherits": "default" }, { - "name": "da1469x_dk_pro", + "name": "atsaml21_xpro", "inherits": "default" }, { - "name": "adafruit_feather_esp32s2", + "name": "b_g474e_dpow1", "inherits": "default" }, { - "name": "adafruit_feather_esp32s3", + "name": "b_u585i_iot2a", "inherits": "default" }, { - "name": "adafruit_feather_esp32_v2", + "name": "ch32v103r_r1_1v0", "inherits": "default" }, { - "name": "adafruit_magtag_29gray", + "name": "ch32v203c_r0_1v0", "inherits": "default" }, { - "name": "adafruit_metro_esp32s2", + "name": "ch32v203g_r0_1v0", "inherits": "default" }, { - "name": "espressif_addax_1", + "name": "ch32v307v_r1_1v0", "inherits": "default" }, { - "name": "espressif_c3_devkitc", + "name": "circuitplayground_bluefruit", "inherits": "default" }, { - "name": "espressif_c6_devkitc", + "name": "circuitplayground_express", "inherits": "default" }, { - "name": "espressif_kaluga_1", + "name": "curiosity_nano", "inherits": "default" }, { - "name": "espressif_p4_function_ev", + "name": "cynthion_d11", "inherits": "default" }, { - "name": "espressif_s2_devkitc", + "name": "cynthion_d21", "inherits": "default" }, { - "name": "espressif_s3_devkitc", + "name": "d5035_01", "inherits": "default" }, { - "name": "espressif_s3_devkitm", + "name": "da14695_dk_usb", "inherits": "default" }, { - "name": "espressif_saola_1", + "name": "da1469x_dk_pro", "inherits": "default" }, { - "name": "f1c100s", + "name": "daisyseed", "inherits": "default" }, { - "name": "fomu", + "name": "double_m33_express", "inherits": "default" }, { - "name": "sipeed_longan_nano", + "name": "ea4088_quickstart", "inherits": "default" }, { - "name": "metro_m7_1011", + "name": "ea4357", "inherits": "default" }, { - "name": "metro_m7_1011_sd", + "name": "ek_tm4c123gxl", "inherits": "default" }, { - "name": "mimxrt1010_evk", + "name": "espressif_addax_1", "inherits": "default" }, { - "name": "mimxrt1015_evk", + "name": "espressif_c3_devkitc", "inherits": "default" }, { - "name": "mimxrt1020_evk", + "name": "espressif_c6_devkitc", "inherits": "default" }, { - "name": "mimxrt1024_evk", + "name": "espressif_kaluga_1", "inherits": "default" }, { - "name": "mimxrt1050_evkb", + "name": "espressif_p4_function_ev", "inherits": "default" }, { - "name": "mimxrt1060_evk", + "name": "espressif_s2_devkitc", "inherits": "default" }, { - "name": "mimxrt1064_evk", + "name": "espressif_s3_devkitc", "inherits": "default" }, { - "name": "mimxrt1170_evkb", + "name": "espressif_s3_devkitm", "inherits": "default" }, { - "name": "teensy_40", + "name": "espressif_saola_1", "inherits": "default" }, { - "name": "teensy_41", + "name": "f1c100s", "inherits": "default" }, { - "name": "frdm_k64f", + "name": "feather_m0_express", "inherits": "default" }, { - "name": "teensy_35", + "name": "feather_m4_express", + "inherits": "default" + }, + { + "name": "feather_nrf52840_express", + "inherits": "default" + }, + { + "name": "feather_nrf52840_sense", + "inherits": "default" + }, + { + "name": "feather_rp2040_max3421", + "inherits": "default" + }, + { + "name": "feather_stm32f405", + "inherits": "default" + }, + { + "name": "fomu", "inherits": "default" }, { @@ -185,7 +205,7 @@ "inherits": "default" }, { - "name": "kuiic", + "name": "frdm_k64f", "inherits": "default" }, { @@ -193,43 +213,51 @@ "inherits": "default" }, { - "name": "lpcxpresso11u37", + "name": "frdm_mcxa153", "inherits": "default" }, { - "name": "lpcxpresso11u68", + "name": "frdm_mcxn947", "inherits": "default" }, { - "name": "lpcxpresso1347", + "name": "itsybitsy_m0", "inherits": "default" }, { - "name": "lpcxpresso1549", + "name": "itsybitsy_m4", "inherits": "default" }, { - "name": "lpcxpresso1769", + "name": "itsybitsy_nrf52840", "inherits": "default" }, { - "name": "mbed1768", + "name": "kuiic", "inherits": "default" }, { - "name": "lpcxpresso18s37", + "name": "lpcxpresso11u37", "inherits": "default" }, { - "name": "mcb1800", + "name": "lpcxpresso11u68", "inherits": "default" }, { - "name": "ea4088_quickstart", + "name": "lpcxpresso1347", "inherits": "default" }, { - "name": "ea4357", + "name": "lpcxpresso1549", + "inherits": "default" + }, + { + "name": "lpcxpresso1769", + "inherits": "default" + }, + { + "name": "lpcxpresso18s37", "inherits": "default" }, { @@ -252,10 +280,6 @@ "name": "lpcxpresso54628", "inherits": "default" }, - { - "name": "double_m33_express", - "inherits": "default" - }, { "name": "lpcxpresso55s28", "inherits": "default" @@ -264,10 +288,6 @@ "name": "lpcxpresso55s69", "inherits": "default" }, - { - "name": "mcu_link", - "inherits": "default" - }, { "name": "max32650evkit", "inherits": "default" @@ -288,10 +308,6 @@ "name": "max32666fthr", "inherits": "default" }, - { - "name": "apard32690", - "inherits": "default" - }, { "name": "max32690evkit", "inherits": "default" @@ -301,107 +317,103 @@ "inherits": "default" }, { - "name": "frdm_mcxa153", - "inherits": "default" - }, - { - "name": "frdm_mcxn947", + "name": "mbed1768", "inherits": "default" }, { - "name": "mcxn947brk", + "name": "mcb1800", "inherits": "default" }, { - "name": "mm32f327x_mb39", + "name": "mcu_link", "inherits": "default" }, { - "name": "mm32f327x_pitaya_lite", + "name": "mcxn947brk", "inherits": "default" }, { - "name": "msp_exp430f5529lp", + "name": "metro_m0_express", "inherits": "default" }, { - "name": "msp_exp432e401y", + "name": "metro_m4_express", "inherits": "default" }, { - "name": "adafruit_clue", + "name": "metro_m7_1011", "inherits": "default" }, { - "name": "arduino_nano33_ble", + "name": "metro_m7_1011_sd", "inherits": "default" }, { - "name": "circuitplayground_bluefruit", + "name": "mimxrt1010_evk", "inherits": "default" }, { - "name": "feather_nrf52840_express", + "name": "mimxrt1015_evk", "inherits": "default" }, { - "name": "feather_nrf52840_sense", + "name": "mimxrt1020_evk", "inherits": "default" }, { - "name": "itsybitsy_nrf52840", + "name": "mimxrt1024_evk", "inherits": "default" }, { - "name": "pca10056", + "name": "mimxrt1050_evkb", "inherits": "default" }, { - "name": "pca10059", + "name": "mimxrt1060_evk", "inherits": "default" }, { - "name": "pca10095", + "name": "mimxrt1064_evk", "inherits": "default" }, { - "name": "pca10100", + "name": "mimxrt1170_evkb", "inherits": "default" }, { - "name": "portenta_c33", + "name": "mm32f327x_mb39", "inherits": "default" }, { - "name": "ra2a1_ek", + "name": "mm32f327x_pitaya_lite", "inherits": "default" }, { - "name": "ra4m1_ek", + "name": "msp_exp430f5529lp", "inherits": "default" }, { - "name": "ra4m3_ek", + "name": "msp_exp432e401y", "inherits": "default" }, { - "name": "ra6m1_ek", + "name": "nanoch32v203", "inherits": "default" }, { - "name": "ra6m5_ek", + "name": "pca10056", "inherits": "default" }, { - "name": "ra8m1_ek", + "name": "pca10059", "inherits": "default" }, { - "name": "uno_r4", + "name": "pca10095", "inherits": "default" }, { - "name": "feather_rp2040_max3421", + "name": "pca10100", "inherits": "default" }, { @@ -409,107 +421,103 @@ "inherits": "default" }, { - "name": "raspberry_pi_pico", - "inherits": "default" - }, - { - "name": "raspberry_pi_pico2", + "name": "portenta_c33", "inherits": "default" }, { - "name": "cynthion_d11", + "name": "pybadge", "inherits": "default" }, { - "name": "samd11_xplained", + "name": "pyboardv11", "inherits": "default" }, { - "name": "atsamd21_xpro", + "name": "pyportal", "inherits": "default" }, { - "name": "circuitplayground_express", + "name": "qtpy", "inherits": "default" }, { - "name": "curiosity_nano", + "name": "ra2a1_ek", "inherits": "default" }, { - "name": "cynthion_d21", + "name": "ra4m1_ek", "inherits": "default" }, { - "name": "feather_m0_express", + "name": "ra4m3_ek", "inherits": "default" }, { - "name": "itsybitsy_m0", + "name": "ra6m1_ek", "inherits": "default" }, { - "name": "metro_m0_express", + "name": "ra6m5_ek", "inherits": "default" }, { - "name": "qtpy", + "name": "ra8m1_ek", "inherits": "default" }, { - "name": "seeeduino_xiao", + "name": "raspberry_pi_pico", "inherits": "default" }, { - "name": "sparkfun_samd21_mini_usb", + "name": "raspberry_pi_pico2", "inherits": "default" }, { - "name": "trinket_m0", + "name": "raspberrypi_cm4", "inherits": "default" }, { - "name": "d5035_01", + "name": "raspberrypi_zero", "inherits": "default" }, { - "name": "feather_m4_express", + "name": "raspberrypi_zero2", "inherits": "default" }, { - "name": "itsybitsy_m4", + "name": "samd11_xplained", "inherits": "default" }, { - "name": "metro_m4_express", + "name": "same54_xplained", "inherits": "default" }, { - "name": "pybadge", + "name": "samg55_xplained", "inherits": "default" }, { - "name": "pyportal", + "name": "saml22_feather", "inherits": "default" }, { - "name": "same54_xplained", + "name": "seeeduino_xiao", "inherits": "default" }, { - "name": "samg55_xplained", + "name": "sensorwatch_m0", "inherits": "default" }, { - "name": "atsaml21_xpro", + "name": "sipeed_longan_nano", "inherits": "default" }, { - "name": "saml22_feather", + "name": "sparkfun_samd21_mini_usb", "inherits": "default" }, { - "name": "sensorwatch_m0", + "name": "stlinkv3mini", "inherits": "default" }, { @@ -528,10 +536,6 @@ "name": "stm32f072eval", "inherits": "default" }, - { - "name": "stm32f103ze_iar", - "inherits": "default" - }, { "name": "stm32f103_bluepill", "inherits": "default" @@ -541,19 +545,15 @@ "inherits": "default" }, { - "name": "stm32f207nucleo", - "inherits": "default" - }, - { - "name": "stm32f303disco", + "name": "stm32f103ze_iar", "inherits": "default" }, { - "name": "feather_stm32f405", + "name": "stm32f207nucleo", "inherits": "default" }, { - "name": "pyboardv11", + "name": "stm32f303disco", "inherits": "default" }, { @@ -588,10 +588,6 @@ "name": "stm32f439nucleo", "inherits": "default" }, - { - "name": "stlinkv3mini", - "inherits": "default" - }, { "name": "stm32f723disco", "inherits": "default" @@ -616,10 +612,6 @@ "name": "stm32g0b1nucleo", "inherits": "default" }, - { - "name": "b_g474e_dpow1", - "inherits": "default" - }, { "name": "stm32g474nucleo", "inherits": "default" @@ -640,10 +632,6 @@ "name": "stm32h573i_dk", "inherits": "default" }, - { - "name": "daisyseed", - "inherits": "default" - }, { "name": "stm32h723nucleo", "inherits": "default" @@ -660,16 +648,12 @@ "name": "stm32h745disco", "inherits": "default" }, - { - "name": "stm32h750bdk", - "inherits": "default" - }, { "name": "stm32h750_weact", "inherits": "default" }, { - "name": "waveshare_openh743i", + "name": "stm32h750bdk", "inherits": "default" }, { @@ -700,10 +684,6 @@ "name": "stm32l4r5nucleo", "inherits": "default" }, - { - "name": "b_u585i_iot2a", - "inherits": "default" - }, { "name": "stm32u545nucleo", "inherits": "default" @@ -725,7 +705,27 @@ "inherits": "default" }, { - "name": "ek_tm4c123gxl", + "name": "teensy_35", + "inherits": "default" + }, + { + "name": "teensy_40", + "inherits": "default" + }, + { + "name": "teensy_41", + "inherits": "default" + }, + { + "name": "trinket_m0", + "inherits": "default" + }, + { + "name": "uno_r4", + "inherits": "default" + }, + { + "name": "waveshare_openh743i", "inherits": "default" }, { @@ -739,19 +739,64 @@ ], "buildPresets": [ { - "name": "raspberrypi_zero", - "description": "Build preset for the raspberrypi_zero board", - "configurePreset": "raspberrypi_zero" + "name": "adafruit_clue", + "description": "Build preset for the adafruit_clue board", + "configurePreset": "adafruit_clue" }, { - "name": "raspberrypi_cm4", - "description": "Build preset for the raspberrypi_cm4 board", - "configurePreset": "raspberrypi_cm4" + "name": "adafruit_feather_esp32_v2", + "description": "Build preset for the adafruit_feather_esp32_v2 board", + "configurePreset": "adafruit_feather_esp32_v2" }, { - "name": "raspberrypi_zero2", - "description": "Build preset for the raspberrypi_zero2 board", - "configurePreset": "raspberrypi_zero2" + "name": "adafruit_feather_esp32s2", + "description": "Build preset for the adafruit_feather_esp32s2 board", + "configurePreset": "adafruit_feather_esp32s2" + }, + { + "name": "adafruit_feather_esp32s3", + "description": "Build preset for the adafruit_feather_esp32s3 board", + "configurePreset": "adafruit_feather_esp32s3" + }, + { + "name": "adafruit_magtag_29gray", + "description": "Build preset for the adafruit_magtag_29gray board", + "configurePreset": "adafruit_magtag_29gray" + }, + { + "name": "adafruit_metro_esp32s2", + "description": "Build preset for the adafruit_metro_esp32s2 board", + "configurePreset": "adafruit_metro_esp32s2" + }, + { + "name": "apard32690", + "description": "Build preset for the apard32690 board", + "configurePreset": "apard32690" + }, + { + "name": "arduino_nano33_ble", + "description": "Build preset for the arduino_nano33_ble board", + "configurePreset": "arduino_nano33_ble" + }, + { + "name": "atsamd21_xpro", + "description": "Build preset for the atsamd21_xpro board", + "configurePreset": "atsamd21_xpro" + }, + { + "name": "atsaml21_xpro", + "description": "Build preset for the atsaml21_xpro board", + "configurePreset": "atsaml21_xpro" + }, + { + "name": "b_g474e_dpow1", + "description": "Build preset for the b_g474e_dpow1 board", + "configurePreset": "b_g474e_dpow1" + }, + { + "name": "b_u585i_iot2a", + "description": "Build preset for the b_u585i_iot2a board", + "configurePreset": "b_u585i_iot2a" }, { "name": "ch32v103r_r1_1v0", @@ -768,16 +813,41 @@ "description": "Build preset for the ch32v203g_r0_1v0 board", "configurePreset": "ch32v203g_r0_1v0" }, - { - "name": "nanoch32v203", - "description": "Build preset for the nanoch32v203 board", - "configurePreset": "nanoch32v203" - }, { "name": "ch32v307v_r1_1v0", "description": "Build preset for the ch32v307v_r1_1v0 board", "configurePreset": "ch32v307v_r1_1v0" }, + { + "name": "circuitplayground_bluefruit", + "description": "Build preset for the circuitplayground_bluefruit board", + "configurePreset": "circuitplayground_bluefruit" + }, + { + "name": "circuitplayground_express", + "description": "Build preset for the circuitplayground_express board", + "configurePreset": "circuitplayground_express" + }, + { + "name": "curiosity_nano", + "description": "Build preset for the curiosity_nano board", + "configurePreset": "curiosity_nano" + }, + { + "name": "cynthion_d11", + "description": "Build preset for the cynthion_d11 board", + "configurePreset": "cynthion_d11" + }, + { + "name": "cynthion_d21", + "description": "Build preset for the cynthion_d21 board", + "configurePreset": "cynthion_d21" + }, + { + "name": "d5035_01", + "description": "Build preset for the d5035_01 board", + "configurePreset": "d5035_01" + }, { "name": "da14695_dk_usb", "description": "Build preset for the da14695_dk_usb board", @@ -789,29 +859,29 @@ "configurePreset": "da1469x_dk_pro" }, { - "name": "adafruit_feather_esp32s2", - "description": "Build preset for the adafruit_feather_esp32s2 board", - "configurePreset": "adafruit_feather_esp32s2" + "name": "daisyseed", + "description": "Build preset for the daisyseed board", + "configurePreset": "daisyseed" }, { - "name": "adafruit_feather_esp32s3", - "description": "Build preset for the adafruit_feather_esp32s3 board", - "configurePreset": "adafruit_feather_esp32s3" + "name": "double_m33_express", + "description": "Build preset for the double_m33_express board", + "configurePreset": "double_m33_express" }, { - "name": "adafruit_feather_esp32_v2", - "description": "Build preset for the adafruit_feather_esp32_v2 board", - "configurePreset": "adafruit_feather_esp32_v2" + "name": "ea4088_quickstart", + "description": "Build preset for the ea4088_quickstart board", + "configurePreset": "ea4088_quickstart" }, { - "name": "adafruit_magtag_29gray", - "description": "Build preset for the adafruit_magtag_29gray board", - "configurePreset": "adafruit_magtag_29gray" + "name": "ea4357", + "description": "Build preset for the ea4357 board", + "configurePreset": "ea4357" }, { - "name": "adafruit_metro_esp32s2", - "description": "Build preset for the adafruit_metro_esp32s2 board", - "configurePreset": "adafruit_metro_esp32s2" + "name": "ek_tm4c123gxl", + "description": "Build preset for the ek_tm4c123gxl board", + "configurePreset": "ek_tm4c123gxl" }, { "name": "espressif_addax_1", @@ -864,105 +934,90 @@ "configurePreset": "f1c100s" }, { - "name": "fomu", - "description": "Build preset for the fomu board", - "configurePreset": "fomu" + "name": "feather_m0_express", + "description": "Build preset for the feather_m0_express board", + "configurePreset": "feather_m0_express" }, { - "name": "sipeed_longan_nano", - "description": "Build preset for the sipeed_longan_nano board", - "configurePreset": "sipeed_longan_nano" + "name": "feather_m4_express", + "description": "Build preset for the feather_m4_express board", + "configurePreset": "feather_m4_express" }, { - "name": "metro_m7_1011", - "description": "Build preset for the metro_m7_1011 board", - "configurePreset": "metro_m7_1011" + "name": "feather_nrf52840_express", + "description": "Build preset for the feather_nrf52840_express board", + "configurePreset": "feather_nrf52840_express" }, { - "name": "metro_m7_1011_sd", - "description": "Build preset for the metro_m7_1011_sd board", - "configurePreset": "metro_m7_1011_sd" + "name": "feather_nrf52840_sense", + "description": "Build preset for the feather_nrf52840_sense board", + "configurePreset": "feather_nrf52840_sense" }, { - "name": "mimxrt1010_evk", - "description": "Build preset for the mimxrt1010_evk board", - "configurePreset": "mimxrt1010_evk" + "name": "feather_rp2040_max3421", + "description": "Build preset for the feather_rp2040_max3421 board", + "configurePreset": "feather_rp2040_max3421" }, { - "name": "mimxrt1015_evk", - "description": "Build preset for the mimxrt1015_evk board", - "configurePreset": "mimxrt1015_evk" + "name": "feather_stm32f405", + "description": "Build preset for the feather_stm32f405 board", + "configurePreset": "feather_stm32f405" }, { - "name": "mimxrt1020_evk", - "description": "Build preset for the mimxrt1020_evk board", - "configurePreset": "mimxrt1020_evk" + "name": "fomu", + "description": "Build preset for the fomu board", + "configurePreset": "fomu" }, { - "name": "mimxrt1024_evk", - "description": "Build preset for the mimxrt1024_evk board", - "configurePreset": "mimxrt1024_evk" + "name": "frdm_k32l2a4s", + "description": "Build preset for the frdm_k32l2a4s board", + "configurePreset": "frdm_k32l2a4s" }, { - "name": "mimxrt1050_evkb", - "description": "Build preset for the mimxrt1050_evkb board", - "configurePreset": "mimxrt1050_evkb" + "name": "frdm_k32l2b", + "description": "Build preset for the frdm_k32l2b board", + "configurePreset": "frdm_k32l2b" }, { - "name": "mimxrt1060_evk", - "description": "Build preset for the mimxrt1060_evk board", - "configurePreset": "mimxrt1060_evk" + "name": "frdm_k64f", + "description": "Build preset for the frdm_k64f board", + "configurePreset": "frdm_k64f" }, { - "name": "mimxrt1064_evk", - "description": "Build preset for the mimxrt1064_evk board", - "configurePreset": "mimxrt1064_evk" + "name": "frdm_kl25z", + "description": "Build preset for the frdm_kl25z board", + "configurePreset": "frdm_kl25z" }, { - "name": "mimxrt1170_evkb", - "description": "Build preset for the mimxrt1170_evkb board", - "configurePreset": "mimxrt1170_evkb" + "name": "frdm_mcxa153", + "description": "Build preset for the frdm_mcxa153 board", + "configurePreset": "frdm_mcxa153" }, { - "name": "teensy_40", - "description": "Build preset for the teensy_40 board", - "configurePreset": "teensy_40" - }, - { - "name": "teensy_41", - "description": "Build preset for the teensy_41 board", - "configurePreset": "teensy_41" - }, - { - "name": "frdm_k64f", - "description": "Build preset for the frdm_k64f board", - "configurePreset": "frdm_k64f" + "name": "frdm_mcxn947", + "description": "Build preset for the frdm_mcxn947 board", + "configurePreset": "frdm_mcxn947" }, { - "name": "teensy_35", - "description": "Build preset for the teensy_35 board", - "configurePreset": "teensy_35" + "name": "itsybitsy_m0", + "description": "Build preset for the itsybitsy_m0 board", + "configurePreset": "itsybitsy_m0" }, { - "name": "frdm_k32l2a4s", - "description": "Build preset for the frdm_k32l2a4s board", - "configurePreset": "frdm_k32l2a4s" + "name": "itsybitsy_m4", + "description": "Build preset for the itsybitsy_m4 board", + "configurePreset": "itsybitsy_m4" }, { - "name": "frdm_k32l2b", - "description": "Build preset for the frdm_k32l2b board", - "configurePreset": "frdm_k32l2b" + "name": "itsybitsy_nrf52840", + "description": "Build preset for the itsybitsy_nrf52840 board", + "configurePreset": "itsybitsy_nrf52840" }, { "name": "kuiic", "description": "Build preset for the kuiic board", "configurePreset": "kuiic" }, - { - "name": "frdm_kl25z", - "description": "Build preset for the frdm_kl25z board", - "configurePreset": "frdm_kl25z" - }, { "name": "lpcxpresso11u37", "description": "Build preset for the lpcxpresso11u37 board", @@ -988,31 +1043,11 @@ "description": "Build preset for the lpcxpresso1769 board", "configurePreset": "lpcxpresso1769" }, - { - "name": "mbed1768", - "description": "Build preset for the mbed1768 board", - "configurePreset": "mbed1768" - }, { "name": "lpcxpresso18s37", "description": "Build preset for the lpcxpresso18s37 board", "configurePreset": "lpcxpresso18s37" }, - { - "name": "mcb1800", - "description": "Build preset for the mcb1800 board", - "configurePreset": "mcb1800" - }, - { - "name": "ea4088_quickstart", - "description": "Build preset for the ea4088_quickstart board", - "configurePreset": "ea4088_quickstart" - }, - { - "name": "ea4357", - "description": "Build preset for the ea4357 board", - "configurePreset": "ea4357" - }, { "name": "lpcxpresso43s67", "description": "Build preset for the lpcxpresso43s67 board", @@ -1038,11 +1073,6 @@ "description": "Build preset for the lpcxpresso54628 board", "configurePreset": "lpcxpresso54628" }, - { - "name": "double_m33_express", - "description": "Build preset for the double_m33_express board", - "configurePreset": "double_m33_express" - }, { "name": "lpcxpresso55s28", "description": "Build preset for the lpcxpresso55s28 board", @@ -1053,11 +1083,6 @@ "description": "Build preset for the lpcxpresso55s69 board", "configurePreset": "lpcxpresso55s69" }, - { - "name": "mcu_link", - "description": "Build preset for the mcu_link board", - "configurePreset": "mcu_link" - }, { "name": "max32650evkit", "description": "Build preset for the max32650evkit board", @@ -1083,11 +1108,6 @@ "description": "Build preset for the max32666fthr board", "configurePreset": "max32666fthr" }, - { - "name": "apard32690", - "description": "Build preset for the apard32690 board", - "configurePreset": "apard32690" - }, { "name": "max32690evkit", "description": "Build preset for the max32690evkit board", @@ -1099,20 +1119,85 @@ "configurePreset": "max78002evkit" }, { - "name": "frdm_mcxa153", - "description": "Build preset for the frdm_mcxa153 board", - "configurePreset": "frdm_mcxa153" + "name": "mbed1768", + "description": "Build preset for the mbed1768 board", + "configurePreset": "mbed1768" }, { - "name": "frdm_mcxn947", - "description": "Build preset for the frdm_mcxn947 board", - "configurePreset": "frdm_mcxn947" + "name": "mcb1800", + "description": "Build preset for the mcb1800 board", + "configurePreset": "mcb1800" + }, + { + "name": "mcu_link", + "description": "Build preset for the mcu_link board", + "configurePreset": "mcu_link" }, { "name": "mcxn947brk", "description": "Build preset for the mcxn947brk board", "configurePreset": "mcxn947brk" }, + { + "name": "metro_m0_express", + "description": "Build preset for the metro_m0_express board", + "configurePreset": "metro_m0_express" + }, + { + "name": "metro_m4_express", + "description": "Build preset for the metro_m4_express board", + "configurePreset": "metro_m4_express" + }, + { + "name": "metro_m7_1011", + "description": "Build preset for the metro_m7_1011 board", + "configurePreset": "metro_m7_1011" + }, + { + "name": "metro_m7_1011_sd", + "description": "Build preset for the metro_m7_1011_sd board", + "configurePreset": "metro_m7_1011_sd" + }, + { + "name": "mimxrt1010_evk", + "description": "Build preset for the mimxrt1010_evk board", + "configurePreset": "mimxrt1010_evk" + }, + { + "name": "mimxrt1015_evk", + "description": "Build preset for the mimxrt1015_evk board", + "configurePreset": "mimxrt1015_evk" + }, + { + "name": "mimxrt1020_evk", + "description": "Build preset for the mimxrt1020_evk board", + "configurePreset": "mimxrt1020_evk" + }, + { + "name": "mimxrt1024_evk", + "description": "Build preset for the mimxrt1024_evk board", + "configurePreset": "mimxrt1024_evk" + }, + { + "name": "mimxrt1050_evkb", + "description": "Build preset for the mimxrt1050_evkb board", + "configurePreset": "mimxrt1050_evkb" + }, + { + "name": "mimxrt1060_evk", + "description": "Build preset for the mimxrt1060_evk board", + "configurePreset": "mimxrt1060_evk" + }, + { + "name": "mimxrt1064_evk", + "description": "Build preset for the mimxrt1064_evk board", + "configurePreset": "mimxrt1064_evk" + }, + { + "name": "mimxrt1170_evkb", + "description": "Build preset for the mimxrt1170_evkb board", + "configurePreset": "mimxrt1170_evkb" + }, { "name": "mm32f327x_mb39", "description": "Build preset for the mm32f327x_mb39 board", @@ -1134,34 +1219,9 @@ "configurePreset": "msp_exp432e401y" }, { - "name": "adafruit_clue", - "description": "Build preset for the adafruit_clue board", - "configurePreset": "adafruit_clue" - }, - { - "name": "arduino_nano33_ble", - "description": "Build preset for the arduino_nano33_ble board", - "configurePreset": "arduino_nano33_ble" - }, - { - "name": "circuitplayground_bluefruit", - "description": "Build preset for the circuitplayground_bluefruit board", - "configurePreset": "circuitplayground_bluefruit" - }, - { - "name": "feather_nrf52840_express", - "description": "Build preset for the feather_nrf52840_express board", - "configurePreset": "feather_nrf52840_express" - }, - { - "name": "feather_nrf52840_sense", - "description": "Build preset for the feather_nrf52840_sense board", - "configurePreset": "feather_nrf52840_sense" - }, - { - "name": "itsybitsy_nrf52840", - "description": "Build preset for the itsybitsy_nrf52840 board", - "configurePreset": "itsybitsy_nrf52840" + "name": "nanoch32v203", + "description": "Build preset for the nanoch32v203 board", + "configurePreset": "nanoch32v203" }, { "name": "pca10056", @@ -1183,11 +1243,36 @@ "description": "Build preset for the pca10100 board", "configurePreset": "pca10100" }, + { + "name": "pico_sdk", + "description": "Build preset for the pico_sdk board", + "configurePreset": "pico_sdk" + }, { "name": "portenta_c33", "description": "Build preset for the portenta_c33 board", "configurePreset": "portenta_c33" }, + { + "name": "pybadge", + "description": "Build preset for the pybadge board", + "configurePreset": "pybadge" + }, + { + "name": "pyboardv11", + "description": "Build preset for the pyboardv11 board", + "configurePreset": "pyboardv11" + }, + { + "name": "pyportal", + "description": "Build preset for the pyportal board", + "configurePreset": "pyportal" + }, + { + "name": "qtpy", + "description": "Build preset for the qtpy board", + "configurePreset": "qtpy" + }, { "name": "ra2a1_ek", "description": "Build preset for the ra2a1_ek board", @@ -1218,21 +1303,6 @@ "description": "Build preset for the ra8m1_ek board", "configurePreset": "ra8m1_ek" }, - { - "name": "uno_r4", - "description": "Build preset for the uno_r4 board", - "configurePreset": "uno_r4" - }, - { - "name": "feather_rp2040_max3421", - "description": "Build preset for the feather_rp2040_max3421 board", - "configurePreset": "feather_rp2040_max3421" - }, - { - "name": "pico_sdk", - "description": "Build preset for the pico_sdk board", - "configurePreset": "pico_sdk" - }, { "name": "raspberry_pi_pico", "description": "Build preset for the raspberry_pi_pico board", @@ -1244,9 +1314,19 @@ "configurePreset": "raspberry_pi_pico2" }, { - "name": "cynthion_d11", - "description": "Build preset for the cynthion_d11 board", - "configurePreset": "cynthion_d11" + "name": "raspberrypi_cm4", + "description": "Build preset for the raspberrypi_cm4 board", + "configurePreset": "raspberrypi_cm4" + }, + { + "name": "raspberrypi_zero", + "description": "Build preset for the raspberrypi_zero board", + "configurePreset": "raspberrypi_zero" + }, + { + "name": "raspberrypi_zero2", + "description": "Build preset for the raspberrypi_zero2 board", + "configurePreset": "raspberrypi_zero2" }, { "name": "samd11_xplained", @@ -1254,44 +1334,19 @@ "configurePreset": "samd11_xplained" }, { - "name": "atsamd21_xpro", - "description": "Build preset for the atsamd21_xpro board", - "configurePreset": "atsamd21_xpro" + "name": "same54_xplained", + "description": "Build preset for the same54_xplained board", + "configurePreset": "same54_xplained" }, { - "name": "circuitplayground_express", - "description": "Build preset for the circuitplayground_express board", - "configurePreset": "circuitplayground_express" + "name": "samg55_xplained", + "description": "Build preset for the samg55_xplained board", + "configurePreset": "samg55_xplained" }, { - "name": "curiosity_nano", - "description": "Build preset for the curiosity_nano board", - "configurePreset": "curiosity_nano" - }, - { - "name": "cynthion_d21", - "description": "Build preset for the cynthion_d21 board", - "configurePreset": "cynthion_d21" - }, - { - "name": "feather_m0_express", - "description": "Build preset for the feather_m0_express board", - "configurePreset": "feather_m0_express" - }, - { - "name": "itsybitsy_m0", - "description": "Build preset for the itsybitsy_m0 board", - "configurePreset": "itsybitsy_m0" - }, - { - "name": "metro_m0_express", - "description": "Build preset for the metro_m0_express board", - "configurePreset": "metro_m0_express" - }, - { - "name": "qtpy", - "description": "Build preset for the qtpy board", - "configurePreset": "qtpy" + "name": "saml22_feather", + "description": "Build preset for the saml22_feather board", + "configurePreset": "saml22_feather" }, { "name": "seeeduino_xiao", @@ -1299,69 +1354,24 @@ "configurePreset": "seeeduino_xiao" }, { - "name": "sparkfun_samd21_mini_usb", - "description": "Build preset for the sparkfun_samd21_mini_usb board", - "configurePreset": "sparkfun_samd21_mini_usb" - }, - { - "name": "trinket_m0", - "description": "Build preset for the trinket_m0 board", - "configurePreset": "trinket_m0" - }, - { - "name": "d5035_01", - "description": "Build preset for the d5035_01 board", - "configurePreset": "d5035_01" - }, - { - "name": "feather_m4_express", - "description": "Build preset for the feather_m4_express board", - "configurePreset": "feather_m4_express" - }, - { - "name": "itsybitsy_m4", - "description": "Build preset for the itsybitsy_m4 board", - "configurePreset": "itsybitsy_m4" - }, - { - "name": "metro_m4_express", - "description": "Build preset for the metro_m4_express board", - "configurePreset": "metro_m4_express" - }, - { - "name": "pybadge", - "description": "Build preset for the pybadge board", - "configurePreset": "pybadge" - }, - { - "name": "pyportal", - "description": "Build preset for the pyportal board", - "configurePreset": "pyportal" - }, - { - "name": "same54_xplained", - "description": "Build preset for the same54_xplained board", - "configurePreset": "same54_xplained" - }, - { - "name": "samg55_xplained", - "description": "Build preset for the samg55_xplained board", - "configurePreset": "samg55_xplained" + "name": "sensorwatch_m0", + "description": "Build preset for the sensorwatch_m0 board", + "configurePreset": "sensorwatch_m0" }, { - "name": "atsaml21_xpro", - "description": "Build preset for the atsaml21_xpro board", - "configurePreset": "atsaml21_xpro" + "name": "sipeed_longan_nano", + "description": "Build preset for the sipeed_longan_nano board", + "configurePreset": "sipeed_longan_nano" }, { - "name": "saml22_feather", - "description": "Build preset for the saml22_feather board", - "configurePreset": "saml22_feather" + "name": "sparkfun_samd21_mini_usb", + "description": "Build preset for the sparkfun_samd21_mini_usb board", + "configurePreset": "sparkfun_samd21_mini_usb" }, { - "name": "sensorwatch_m0", - "description": "Build preset for the sensorwatch_m0 board", - "configurePreset": "sensorwatch_m0" + "name": "stlinkv3mini", + "description": "Build preset for the stlinkv3mini board", + "configurePreset": "stlinkv3mini" }, { "name": "stm32c071nucleo", @@ -1383,11 +1393,6 @@ "description": "Build preset for the stm32f072eval board", "configurePreset": "stm32f072eval" }, - { - "name": "stm32f103ze_iar", - "description": "Build preset for the stm32f103ze_iar board", - "configurePreset": "stm32f103ze_iar" - }, { "name": "stm32f103_bluepill", "description": "Build preset for the stm32f103_bluepill board", @@ -1398,6 +1403,11 @@ "description": "Build preset for the stm32f103_mini_2 board", "configurePreset": "stm32f103_mini_2" }, + { + "name": "stm32f103ze_iar", + "description": "Build preset for the stm32f103ze_iar board", + "configurePreset": "stm32f103ze_iar" + }, { "name": "stm32f207nucleo", "description": "Build preset for the stm32f207nucleo board", @@ -1408,16 +1418,6 @@ "description": "Build preset for the stm32f303disco board", "configurePreset": "stm32f303disco" }, - { - "name": "feather_stm32f405", - "description": "Build preset for the feather_stm32f405 board", - "configurePreset": "feather_stm32f405" - }, - { - "name": "pyboardv11", - "description": "Build preset for the pyboardv11 board", - "configurePreset": "pyboardv11" - }, { "name": "stm32f401blackpill", "description": "Build preset for the stm32f401blackpill board", @@ -1458,11 +1458,6 @@ "description": "Build preset for the stm32f439nucleo board", "configurePreset": "stm32f439nucleo" }, - { - "name": "stlinkv3mini", - "description": "Build preset for the stlinkv3mini board", - "configurePreset": "stlinkv3mini" - }, { "name": "stm32f723disco", "description": "Build preset for the stm32f723disco board", @@ -1493,11 +1488,6 @@ "description": "Build preset for the stm32g0b1nucleo board", "configurePreset": "stm32g0b1nucleo" }, - { - "name": "b_g474e_dpow1", - "description": "Build preset for the b_g474e_dpow1 board", - "configurePreset": "b_g474e_dpow1" - }, { "name": "stm32g474nucleo", "description": "Build preset for the stm32g474nucleo board", @@ -1523,11 +1513,6 @@ "description": "Build preset for the stm32h573i_dk board", "configurePreset": "stm32h573i_dk" }, - { - "name": "daisyseed", - "description": "Build preset for the daisyseed board", - "configurePreset": "daisyseed" - }, { "name": "stm32h723nucleo", "description": "Build preset for the stm32h723nucleo board", @@ -1548,20 +1533,15 @@ "description": "Build preset for the stm32h745disco board", "configurePreset": "stm32h745disco" }, - { - "name": "stm32h750bdk", - "description": "Build preset for the stm32h750bdk board", - "configurePreset": "stm32h750bdk" - }, { "name": "stm32h750_weact", "description": "Build preset for the stm32h750_weact board", "configurePreset": "stm32h750_weact" }, { - "name": "waveshare_openh743i", - "description": "Build preset for the waveshare_openh743i board", - "configurePreset": "waveshare_openh743i" + "name": "stm32h750bdk", + "description": "Build preset for the stm32h750bdk board", + "configurePreset": "stm32h750bdk" }, { "name": "stm32h7s3nucleo", @@ -1598,11 +1578,6 @@ "description": "Build preset for the stm32l4r5nucleo board", "configurePreset": "stm32l4r5nucleo" }, - { - "name": "b_u585i_iot2a", - "description": "Build preset for the b_u585i_iot2a board", - "configurePreset": "b_u585i_iot2a" - }, { "name": "stm32u545nucleo", "description": "Build preset for the stm32u545nucleo board", @@ -1629,9 +1604,34 @@ "configurePreset": "stm32wb55nucleo" }, { - "name": "ek_tm4c123gxl", - "description": "Build preset for the ek_tm4c123gxl board", - "configurePreset": "ek_tm4c123gxl" + "name": "teensy_35", + "description": "Build preset for the teensy_35 board", + "configurePreset": "teensy_35" + }, + { + "name": "teensy_40", + "description": "Build preset for the teensy_40 board", + "configurePreset": "teensy_40" + }, + { + "name": "teensy_41", + "description": "Build preset for the teensy_41 board", + "configurePreset": "teensy_41" + }, + { + "name": "trinket_m0", + "description": "Build preset for the trinket_m0 board", + "configurePreset": "trinket_m0" + }, + { + "name": "uno_r4", + "description": "Build preset for the uno_r4 board", + "configurePreset": "uno_r4" + }, + { + "name": "waveshare_openh743i", + "description": "Build preset for the waveshare_openh743i board", + "configurePreset": "waveshare_openh743i" }, { "name": "xmc4500_relax", @@ -1646,41 +1646,158 @@ ], "workflowPresets": [ { - "name": "raspberrypi_zero", + "name": "adafruit_clue", "steps": [ { "type": "configure", - "name": "raspberrypi_zero" + "name": "adafruit_clue" }, { "type": "build", - "name": "raspberrypi_zero" + "name": "adafruit_clue" } ] }, { - "name": "raspberrypi_cm4", + "name": "adafruit_feather_esp32_v2", "steps": [ { "type": "configure", - "name": "raspberrypi_cm4" + "name": "adafruit_feather_esp32_v2" }, { "type": "build", - "name": "raspberrypi_cm4" + "name": "adafruit_feather_esp32_v2" } ] }, { - "name": "raspberrypi_zero2", + "name": "adafruit_feather_esp32s2", "steps": [ { "type": "configure", - "name": "raspberrypi_zero2" + "name": "adafruit_feather_esp32s2" }, { "type": "build", - "name": "raspberrypi_zero2" + "name": "adafruit_feather_esp32s2" + } + ] + }, + { + "name": "adafruit_feather_esp32s3", + "steps": [ + { + "type": "configure", + "name": "adafruit_feather_esp32s3" + }, + { + "type": "build", + "name": "adafruit_feather_esp32s3" + } + ] + }, + { + "name": "adafruit_magtag_29gray", + "steps": [ + { + "type": "configure", + "name": "adafruit_magtag_29gray" + }, + { + "type": "build", + "name": "adafruit_magtag_29gray" + } + ] + }, + { + "name": "adafruit_metro_esp32s2", + "steps": [ + { + "type": "configure", + "name": "adafruit_metro_esp32s2" + }, + { + "type": "build", + "name": "adafruit_metro_esp32s2" + } + ] + }, + { + "name": "apard32690", + "steps": [ + { + "type": "configure", + "name": "apard32690" + }, + { + "type": "build", + "name": "apard32690" + } + ] + }, + { + "name": "arduino_nano33_ble", + "steps": [ + { + "type": "configure", + "name": "arduino_nano33_ble" + }, + { + "type": "build", + "name": "arduino_nano33_ble" + } + ] + }, + { + "name": "atsamd21_xpro", + "steps": [ + { + "type": "configure", + "name": "atsamd21_xpro" + }, + { + "type": "build", + "name": "atsamd21_xpro" + } + ] + }, + { + "name": "atsaml21_xpro", + "steps": [ + { + "type": "configure", + "name": "atsaml21_xpro" + }, + { + "type": "build", + "name": "atsaml21_xpro" + } + ] + }, + { + "name": "b_g474e_dpow1", + "steps": [ + { + "type": "configure", + "name": "b_g474e_dpow1" + }, + { + "type": "build", + "name": "b_g474e_dpow1" + } + ] + }, + { + "name": "b_u585i_iot2a", + "steps": [ + { + "type": "configure", + "name": "b_u585i_iot2a" + }, + { + "type": "build", + "name": "b_u585i_iot2a" } ] }, @@ -1724,28 +1841,93 @@ ] }, { - "name": "nanoch32v203", + "name": "ch32v307v_r1_1v0", "steps": [ { "type": "configure", - "name": "nanoch32v203" + "name": "ch32v307v_r1_1v0" }, { "type": "build", - "name": "nanoch32v203" + "name": "ch32v307v_r1_1v0" } ] }, { - "name": "ch32v307v_r1_1v0", + "name": "circuitplayground_bluefruit", "steps": [ { "type": "configure", - "name": "ch32v307v_r1_1v0" + "name": "circuitplayground_bluefruit" }, { "type": "build", - "name": "ch32v307v_r1_1v0" + "name": "circuitplayground_bluefruit" + } + ] + }, + { + "name": "circuitplayground_express", + "steps": [ + { + "type": "configure", + "name": "circuitplayground_express" + }, + { + "type": "build", + "name": "circuitplayground_express" + } + ] + }, + { + "name": "curiosity_nano", + "steps": [ + { + "type": "configure", + "name": "curiosity_nano" + }, + { + "type": "build", + "name": "curiosity_nano" + } + ] + }, + { + "name": "cynthion_d11", + "steps": [ + { + "type": "configure", + "name": "cynthion_d11" + }, + { + "type": "build", + "name": "cynthion_d11" + } + ] + }, + { + "name": "cynthion_d21", + "steps": [ + { + "type": "configure", + "name": "cynthion_d21" + }, + { + "type": "build", + "name": "cynthion_d21" + } + ] + }, + { + "name": "d5035_01", + "steps": [ + { + "type": "configure", + "name": "d5035_01" + }, + { + "type": "build", + "name": "d5035_01" } ] }, @@ -1776,67 +1958,67 @@ ] }, { - "name": "adafruit_feather_esp32s2", + "name": "daisyseed", "steps": [ { "type": "configure", - "name": "adafruit_feather_esp32s2" + "name": "daisyseed" }, { "type": "build", - "name": "adafruit_feather_esp32s2" + "name": "daisyseed" } ] }, { - "name": "adafruit_feather_esp32s3", + "name": "double_m33_express", "steps": [ { "type": "configure", - "name": "adafruit_feather_esp32s3" + "name": "double_m33_express" }, { "type": "build", - "name": "adafruit_feather_esp32s3" + "name": "double_m33_express" } ] }, { - "name": "adafruit_feather_esp32_v2", + "name": "ea4088_quickstart", "steps": [ { "type": "configure", - "name": "adafruit_feather_esp32_v2" + "name": "ea4088_quickstart" }, { "type": "build", - "name": "adafruit_feather_esp32_v2" + "name": "ea4088_quickstart" } ] }, { - "name": "adafruit_magtag_29gray", + "name": "ea4357", "steps": [ { "type": "configure", - "name": "adafruit_magtag_29gray" + "name": "ea4357" }, { "type": "build", - "name": "adafruit_magtag_29gray" + "name": "ea4357" } ] }, { - "name": "adafruit_metro_esp32s2", + "name": "ek_tm4c123gxl", "steps": [ { "type": "configure", - "name": "adafruit_metro_esp32s2" + "name": "ek_tm4c123gxl" }, { "type": "build", - "name": "adafruit_metro_esp32s2" + "name": "ek_tm4c123gxl" } ] }, @@ -1971,236 +2153,210 @@ ] }, { - "name": "fomu", - "steps": [ - { - "type": "configure", - "name": "fomu" - }, - { - "type": "build", - "name": "fomu" - } - ] - }, - { - "name": "sipeed_longan_nano", - "steps": [ - { - "type": "configure", - "name": "sipeed_longan_nano" - }, - { - "type": "build", - "name": "sipeed_longan_nano" - } - ] - }, - { - "name": "metro_m7_1011", + "name": "feather_m0_express", "steps": [ { "type": "configure", - "name": "metro_m7_1011" + "name": "feather_m0_express" }, { "type": "build", - "name": "metro_m7_1011" + "name": "feather_m0_express" } ] }, { - "name": "metro_m7_1011_sd", + "name": "feather_m4_express", "steps": [ { "type": "configure", - "name": "metro_m7_1011_sd" + "name": "feather_m4_express" }, { "type": "build", - "name": "metro_m7_1011_sd" + "name": "feather_m4_express" } ] }, { - "name": "mimxrt1010_evk", + "name": "feather_nrf52840_express", "steps": [ { "type": "configure", - "name": "mimxrt1010_evk" + "name": "feather_nrf52840_express" }, { "type": "build", - "name": "mimxrt1010_evk" + "name": "feather_nrf52840_express" } ] }, { - "name": "mimxrt1015_evk", + "name": "feather_nrf52840_sense", "steps": [ { "type": "configure", - "name": "mimxrt1015_evk" + "name": "feather_nrf52840_sense" }, { "type": "build", - "name": "mimxrt1015_evk" + "name": "feather_nrf52840_sense" } ] }, { - "name": "mimxrt1020_evk", + "name": "feather_rp2040_max3421", "steps": [ { "type": "configure", - "name": "mimxrt1020_evk" + "name": "feather_rp2040_max3421" }, { "type": "build", - "name": "mimxrt1020_evk" + "name": "feather_rp2040_max3421" } ] }, { - "name": "mimxrt1024_evk", + "name": "feather_stm32f405", "steps": [ { "type": "configure", - "name": "mimxrt1024_evk" + "name": "feather_stm32f405" }, { "type": "build", - "name": "mimxrt1024_evk" + "name": "feather_stm32f405" } ] }, { - "name": "mimxrt1050_evkb", + "name": "fomu", "steps": [ { "type": "configure", - "name": "mimxrt1050_evkb" + "name": "fomu" }, { "type": "build", - "name": "mimxrt1050_evkb" + "name": "fomu" } ] }, { - "name": "mimxrt1060_evk", + "name": "frdm_k32l2a4s", "steps": [ { "type": "configure", - "name": "mimxrt1060_evk" + "name": "frdm_k32l2a4s" }, { "type": "build", - "name": "mimxrt1060_evk" + "name": "frdm_k32l2a4s" } ] }, { - "name": "mimxrt1064_evk", + "name": "frdm_k32l2b", "steps": [ { "type": "configure", - "name": "mimxrt1064_evk" + "name": "frdm_k32l2b" }, { "type": "build", - "name": "mimxrt1064_evk" + "name": "frdm_k32l2b" } ] }, { - "name": "mimxrt1170_evkb", + "name": "frdm_k64f", "steps": [ { "type": "configure", - "name": "mimxrt1170_evkb" + "name": "frdm_k64f" }, { "type": "build", - "name": "mimxrt1170_evkb" + "name": "frdm_k64f" } ] }, { - "name": "teensy_40", + "name": "frdm_kl25z", "steps": [ { "type": "configure", - "name": "teensy_40" + "name": "frdm_kl25z" }, { "type": "build", - "name": "teensy_40" + "name": "frdm_kl25z" } ] }, { - "name": "teensy_41", + "name": "frdm_mcxa153", "steps": [ { "type": "configure", - "name": "teensy_41" + "name": "frdm_mcxa153" }, { "type": "build", - "name": "teensy_41" + "name": "frdm_mcxa153" } ] }, { - "name": "frdm_k64f", + "name": "frdm_mcxn947", "steps": [ { "type": "configure", - "name": "frdm_k64f" + "name": "frdm_mcxn947" }, { "type": "build", - "name": "frdm_k64f" + "name": "frdm_mcxn947" } ] }, { - "name": "teensy_35", + "name": "itsybitsy_m0", "steps": [ { "type": "configure", - "name": "teensy_35" + "name": "itsybitsy_m0" }, { "type": "build", - "name": "teensy_35" + "name": "itsybitsy_m0" } ] }, { - "name": "frdm_k32l2a4s", + "name": "itsybitsy_m4", "steps": [ { "type": "configure", - "name": "frdm_k32l2a4s" + "name": "itsybitsy_m4" }, { "type": "build", - "name": "frdm_k32l2a4s" + "name": "itsybitsy_m4" } ] }, { - "name": "frdm_k32l2b", + "name": "itsybitsy_nrf52840", "steps": [ { "type": "configure", - "name": "frdm_k32l2b" + "name": "itsybitsy_nrf52840" }, { "type": "build", - "name": "frdm_k32l2b" + "name": "itsybitsy_nrf52840" } ] }, @@ -2217,19 +2373,6 @@ } ] }, - { - "name": "frdm_kl25z", - "steps": [ - { - "type": "configure", - "name": "frdm_kl25z" - }, - { - "type": "build", - "name": "frdm_kl25z" - } - ] - }, { "name": "lpcxpresso11u37", "steps": [ @@ -2295,19 +2438,6 @@ } ] }, - { - "name": "mbed1768", - "steps": [ - { - "type": "configure", - "name": "mbed1768" - }, - { - "type": "build", - "name": "mbed1768" - } - ] - }, { "name": "lpcxpresso18s37", "steps": [ @@ -2321,45 +2451,6 @@ } ] }, - { - "name": "mcb1800", - "steps": [ - { - "type": "configure", - "name": "mcb1800" - }, - { - "type": "build", - "name": "mcb1800" - } - ] - }, - { - "name": "ea4088_quickstart", - "steps": [ - { - "type": "configure", - "name": "ea4088_quickstart" - }, - { - "type": "build", - "name": "ea4088_quickstart" - } - ] - }, - { - "name": "ea4357", - "steps": [ - { - "type": "configure", - "name": "ea4357" - }, - { - "type": "build", - "name": "ea4357" - } - ] - }, { "name": "lpcxpresso43s67", "steps": [ @@ -2425,19 +2516,6 @@ } ] }, - { - "name": "double_m33_express", - "steps": [ - { - "type": "configure", - "name": "double_m33_express" - }, - { - "type": "build", - "name": "double_m33_express" - } - ] - }, { "name": "lpcxpresso55s28", "steps": [ @@ -2464,19 +2542,6 @@ } ] }, - { - "name": "mcu_link", - "steps": [ - { - "type": "configure", - "name": "mcu_link" - }, - { - "type": "build", - "name": "mcu_link" - } - ] - }, { "name": "max32650evkit", "steps": [ @@ -2525,748 +2590,709 @@ }, { "type": "build", - "name": "max32666evkit" - } - ] - }, - { - "name": "max32666fthr", - "steps": [ - { - "type": "configure", - "name": "max32666fthr" - }, - { - "type": "build", - "name": "max32666fthr" - } - ] - }, - { - "name": "apard32690", - "steps": [ - { - "type": "configure", - "name": "apard32690" - }, - { - "type": "build", - "name": "apard32690" - } - ] - }, - { - "name": "max32690evkit", - "steps": [ - { - "type": "configure", - "name": "max32690evkit" - }, - { - "type": "build", - "name": "max32690evkit" + "name": "max32666evkit" } ] }, { - "name": "max78002evkit", + "name": "max32666fthr", "steps": [ { "type": "configure", - "name": "max78002evkit" + "name": "max32666fthr" }, { "type": "build", - "name": "max78002evkit" + "name": "max32666fthr" } ] }, { - "name": "frdm_mcxa153", + "name": "max32690evkit", "steps": [ { "type": "configure", - "name": "frdm_mcxa153" + "name": "max32690evkit" }, { "type": "build", - "name": "frdm_mcxa153" + "name": "max32690evkit" } ] }, { - "name": "frdm_mcxn947", + "name": "max78002evkit", "steps": [ { "type": "configure", - "name": "frdm_mcxn947" + "name": "max78002evkit" }, { "type": "build", - "name": "frdm_mcxn947" + "name": "max78002evkit" } ] }, { - "name": "mcxn947brk", + "name": "mbed1768", "steps": [ { "type": "configure", - "name": "mcxn947brk" + "name": "mbed1768" }, { "type": "build", - "name": "mcxn947brk" + "name": "mbed1768" } ] }, { - "name": "mm32f327x_mb39", + "name": "mcb1800", "steps": [ { "type": "configure", - "name": "mm32f327x_mb39" + "name": "mcb1800" }, { "type": "build", - "name": "mm32f327x_mb39" + "name": "mcb1800" } ] }, { - "name": "mm32f327x_pitaya_lite", + "name": "mcu_link", "steps": [ { "type": "configure", - "name": "mm32f327x_pitaya_lite" + "name": "mcu_link" }, { "type": "build", - "name": "mm32f327x_pitaya_lite" + "name": "mcu_link" } ] }, { - "name": "msp_exp430f5529lp", + "name": "mcxn947brk", "steps": [ { "type": "configure", - "name": "msp_exp430f5529lp" + "name": "mcxn947brk" }, { "type": "build", - "name": "msp_exp430f5529lp" + "name": "mcxn947brk" } ] }, { - "name": "msp_exp432e401y", + "name": "metro_m0_express", "steps": [ { "type": "configure", - "name": "msp_exp432e401y" + "name": "metro_m0_express" }, { "type": "build", - "name": "msp_exp432e401y" + "name": "metro_m0_express" } ] }, { - "name": "adafruit_clue", + "name": "metro_m4_express", "steps": [ { "type": "configure", - "name": "adafruit_clue" + "name": "metro_m4_express" }, { "type": "build", - "name": "adafruit_clue" + "name": "metro_m4_express" } ] }, { - "name": "arduino_nano33_ble", + "name": "metro_m7_1011", "steps": [ { "type": "configure", - "name": "arduino_nano33_ble" + "name": "metro_m7_1011" }, { "type": "build", - "name": "arduino_nano33_ble" + "name": "metro_m7_1011" } ] }, { - "name": "circuitplayground_bluefruit", + "name": "metro_m7_1011_sd", "steps": [ { "type": "configure", - "name": "circuitplayground_bluefruit" + "name": "metro_m7_1011_sd" }, { "type": "build", - "name": "circuitplayground_bluefruit" + "name": "metro_m7_1011_sd" } ] }, { - "name": "feather_nrf52840_express", + "name": "mimxrt1010_evk", "steps": [ { "type": "configure", - "name": "feather_nrf52840_express" + "name": "mimxrt1010_evk" }, { "type": "build", - "name": "feather_nrf52840_express" + "name": "mimxrt1010_evk" } ] }, { - "name": "feather_nrf52840_sense", + "name": "mimxrt1015_evk", "steps": [ { "type": "configure", - "name": "feather_nrf52840_sense" + "name": "mimxrt1015_evk" }, { "type": "build", - "name": "feather_nrf52840_sense" + "name": "mimxrt1015_evk" } ] }, { - "name": "itsybitsy_nrf52840", + "name": "mimxrt1020_evk", "steps": [ { "type": "configure", - "name": "itsybitsy_nrf52840" + "name": "mimxrt1020_evk" }, { "type": "build", - "name": "itsybitsy_nrf52840" + "name": "mimxrt1020_evk" } ] }, { - "name": "pca10056", + "name": "mimxrt1024_evk", "steps": [ { "type": "configure", - "name": "pca10056" + "name": "mimxrt1024_evk" }, { "type": "build", - "name": "pca10056" + "name": "mimxrt1024_evk" } ] }, { - "name": "pca10059", + "name": "mimxrt1050_evkb", "steps": [ { "type": "configure", - "name": "pca10059" + "name": "mimxrt1050_evkb" }, { "type": "build", - "name": "pca10059" + "name": "mimxrt1050_evkb" } ] }, { - "name": "pca10095", + "name": "mimxrt1060_evk", "steps": [ { "type": "configure", - "name": "pca10095" + "name": "mimxrt1060_evk" }, { "type": "build", - "name": "pca10095" + "name": "mimxrt1060_evk" } ] }, { - "name": "pca10100", + "name": "mimxrt1064_evk", "steps": [ { "type": "configure", - "name": "pca10100" + "name": "mimxrt1064_evk" }, { "type": "build", - "name": "pca10100" + "name": "mimxrt1064_evk" } ] }, { - "name": "portenta_c33", + "name": "mimxrt1170_evkb", "steps": [ { "type": "configure", - "name": "portenta_c33" + "name": "mimxrt1170_evkb" }, { "type": "build", - "name": "portenta_c33" + "name": "mimxrt1170_evkb" } ] }, { - "name": "ra2a1_ek", + "name": "mm32f327x_mb39", "steps": [ { "type": "configure", - "name": "ra2a1_ek" + "name": "mm32f327x_mb39" }, { "type": "build", - "name": "ra2a1_ek" + "name": "mm32f327x_mb39" } ] }, { - "name": "ra4m1_ek", + "name": "mm32f327x_pitaya_lite", "steps": [ { "type": "configure", - "name": "ra4m1_ek" + "name": "mm32f327x_pitaya_lite" }, { "type": "build", - "name": "ra4m1_ek" + "name": "mm32f327x_pitaya_lite" } ] }, { - "name": "ra4m3_ek", + "name": "msp_exp430f5529lp", "steps": [ { "type": "configure", - "name": "ra4m3_ek" + "name": "msp_exp430f5529lp" }, { "type": "build", - "name": "ra4m3_ek" + "name": "msp_exp430f5529lp" } ] }, { - "name": "ra6m1_ek", + "name": "msp_exp432e401y", "steps": [ { "type": "configure", - "name": "ra6m1_ek" + "name": "msp_exp432e401y" }, { "type": "build", - "name": "ra6m1_ek" + "name": "msp_exp432e401y" } ] }, { - "name": "ra6m5_ek", + "name": "nanoch32v203", "steps": [ { "type": "configure", - "name": "ra6m5_ek" + "name": "nanoch32v203" }, { "type": "build", - "name": "ra6m5_ek" + "name": "nanoch32v203" } ] }, { - "name": "ra8m1_ek", + "name": "pca10056", "steps": [ { "type": "configure", - "name": "ra8m1_ek" + "name": "pca10056" }, { "type": "build", - "name": "ra8m1_ek" + "name": "pca10056" } ] }, { - "name": "uno_r4", + "name": "pca10059", "steps": [ { "type": "configure", - "name": "uno_r4" + "name": "pca10059" }, { "type": "build", - "name": "uno_r4" + "name": "pca10059" } ] }, { - "name": "feather_rp2040_max3421", + "name": "pca10095", "steps": [ { "type": "configure", - "name": "feather_rp2040_max3421" + "name": "pca10095" }, { "type": "build", - "name": "feather_rp2040_max3421" + "name": "pca10095" } ] }, { - "name": "pico_sdk", + "name": "pca10100", "steps": [ { "type": "configure", - "name": "pico_sdk" + "name": "pca10100" }, { "type": "build", - "name": "pico_sdk" + "name": "pca10100" } ] }, { - "name": "raspberry_pi_pico", + "name": "pico_sdk", "steps": [ { "type": "configure", - "name": "raspberry_pi_pico" + "name": "pico_sdk" }, { "type": "build", - "name": "raspberry_pi_pico" + "name": "pico_sdk" } ] }, { - "name": "raspberry_pi_pico2", + "name": "portenta_c33", "steps": [ { "type": "configure", - "name": "raspberry_pi_pico2" + "name": "portenta_c33" }, { "type": "build", - "name": "raspberry_pi_pico2" + "name": "portenta_c33" } ] }, { - "name": "cynthion_d11", + "name": "pybadge", "steps": [ { "type": "configure", - "name": "cynthion_d11" + "name": "pybadge" }, { "type": "build", - "name": "cynthion_d11" + "name": "pybadge" } ] }, { - "name": "samd11_xplained", + "name": "pyboardv11", "steps": [ { "type": "configure", - "name": "samd11_xplained" + "name": "pyboardv11" }, { "type": "build", - "name": "samd11_xplained" + "name": "pyboardv11" } ] }, { - "name": "atsamd21_xpro", + "name": "pyportal", "steps": [ { "type": "configure", - "name": "atsamd21_xpro" + "name": "pyportal" }, { "type": "build", - "name": "atsamd21_xpro" + "name": "pyportal" } ] }, { - "name": "circuitplayground_express", + "name": "qtpy", "steps": [ { "type": "configure", - "name": "circuitplayground_express" + "name": "qtpy" }, { "type": "build", - "name": "circuitplayground_express" + "name": "qtpy" } ] }, { - "name": "curiosity_nano", + "name": "ra2a1_ek", "steps": [ { "type": "configure", - "name": "curiosity_nano" + "name": "ra2a1_ek" }, { "type": "build", - "name": "curiosity_nano" + "name": "ra2a1_ek" } ] }, { - "name": "cynthion_d21", + "name": "ra4m1_ek", "steps": [ { "type": "configure", - "name": "cynthion_d21" + "name": "ra4m1_ek" }, { "type": "build", - "name": "cynthion_d21" + "name": "ra4m1_ek" } ] }, { - "name": "feather_m0_express", + "name": "ra4m3_ek", "steps": [ { "type": "configure", - "name": "feather_m0_express" + "name": "ra4m3_ek" }, { "type": "build", - "name": "feather_m0_express" + "name": "ra4m3_ek" } ] }, { - "name": "itsybitsy_m0", + "name": "ra6m1_ek", "steps": [ { "type": "configure", - "name": "itsybitsy_m0" + "name": "ra6m1_ek" }, { "type": "build", - "name": "itsybitsy_m0" + "name": "ra6m1_ek" } ] }, { - "name": "metro_m0_express", + "name": "ra6m5_ek", "steps": [ { "type": "configure", - "name": "metro_m0_express" + "name": "ra6m5_ek" }, { "type": "build", - "name": "metro_m0_express" + "name": "ra6m5_ek" } ] }, { - "name": "qtpy", + "name": "ra8m1_ek", "steps": [ { "type": "configure", - "name": "qtpy" + "name": "ra8m1_ek" }, { "type": "build", - "name": "qtpy" + "name": "ra8m1_ek" } ] }, { - "name": "seeeduino_xiao", + "name": "raspberry_pi_pico", "steps": [ { "type": "configure", - "name": "seeeduino_xiao" + "name": "raspberry_pi_pico" }, { "type": "build", - "name": "seeeduino_xiao" + "name": "raspberry_pi_pico" } ] }, { - "name": "sparkfun_samd21_mini_usb", + "name": "raspberry_pi_pico2", "steps": [ { "type": "configure", - "name": "sparkfun_samd21_mini_usb" + "name": "raspberry_pi_pico2" }, { "type": "build", - "name": "sparkfun_samd21_mini_usb" + "name": "raspberry_pi_pico2" } ] }, { - "name": "trinket_m0", + "name": "raspberrypi_cm4", "steps": [ { "type": "configure", - "name": "trinket_m0" + "name": "raspberrypi_cm4" }, { "type": "build", - "name": "trinket_m0" + "name": "raspberrypi_cm4" } ] }, { - "name": "d5035_01", + "name": "raspberrypi_zero", "steps": [ { "type": "configure", - "name": "d5035_01" + "name": "raspberrypi_zero" }, { "type": "build", - "name": "d5035_01" + "name": "raspberrypi_zero" } ] }, { - "name": "feather_m4_express", + "name": "raspberrypi_zero2", "steps": [ { "type": "configure", - "name": "feather_m4_express" + "name": "raspberrypi_zero2" }, { "type": "build", - "name": "feather_m4_express" + "name": "raspberrypi_zero2" } ] }, { - "name": "itsybitsy_m4", + "name": "samd11_xplained", "steps": [ { "type": "configure", - "name": "itsybitsy_m4" + "name": "samd11_xplained" }, { "type": "build", - "name": "itsybitsy_m4" + "name": "samd11_xplained" } ] }, { - "name": "metro_m4_express", + "name": "same54_xplained", "steps": [ { "type": "configure", - "name": "metro_m4_express" + "name": "same54_xplained" }, { "type": "build", - "name": "metro_m4_express" + "name": "same54_xplained" } ] }, { - "name": "pybadge", + "name": "samg55_xplained", "steps": [ { "type": "configure", - "name": "pybadge" + "name": "samg55_xplained" }, { "type": "build", - "name": "pybadge" + "name": "samg55_xplained" } ] }, { - "name": "pyportal", + "name": "saml22_feather", "steps": [ { "type": "configure", - "name": "pyportal" + "name": "saml22_feather" }, { "type": "build", - "name": "pyportal" + "name": "saml22_feather" } ] }, { - "name": "same54_xplained", + "name": "seeeduino_xiao", "steps": [ { "type": "configure", - "name": "same54_xplained" + "name": "seeeduino_xiao" }, { "type": "build", - "name": "same54_xplained" + "name": "seeeduino_xiao" } ] }, { - "name": "samg55_xplained", + "name": "sensorwatch_m0", "steps": [ { "type": "configure", - "name": "samg55_xplained" + "name": "sensorwatch_m0" }, { "type": "build", - "name": "samg55_xplained" + "name": "sensorwatch_m0" } ] }, { - "name": "atsaml21_xpro", + "name": "sipeed_longan_nano", "steps": [ { "type": "configure", - "name": "atsaml21_xpro" + "name": "sipeed_longan_nano" }, { "type": "build", - "name": "atsaml21_xpro" + "name": "sipeed_longan_nano" } ] }, { - "name": "saml22_feather", + "name": "sparkfun_samd21_mini_usb", "steps": [ { "type": "configure", - "name": "saml22_feather" + "name": "sparkfun_samd21_mini_usb" }, { "type": "build", - "name": "saml22_feather" + "name": "sparkfun_samd21_mini_usb" } ] }, { - "name": "sensorwatch_m0", + "name": "stlinkv3mini", "steps": [ { "type": "configure", - "name": "sensorwatch_m0" + "name": "stlinkv3mini" }, { "type": "build", - "name": "sensorwatch_m0" + "name": "stlinkv3mini" } ] }, @@ -3322,19 +3348,6 @@ } ] }, - { - "name": "stm32f103ze_iar", - "steps": [ - { - "type": "configure", - "name": "stm32f103ze_iar" - }, - { - "type": "build", - "name": "stm32f103ze_iar" - } - ] - }, { "name": "stm32f103_bluepill", "steps": [ @@ -3362,54 +3375,41 @@ ] }, { - "name": "stm32f207nucleo", - "steps": [ - { - "type": "configure", - "name": "stm32f207nucleo" - }, - { - "type": "build", - "name": "stm32f207nucleo" - } - ] - }, - { - "name": "stm32f303disco", + "name": "stm32f103ze_iar", "steps": [ { "type": "configure", - "name": "stm32f303disco" + "name": "stm32f103ze_iar" }, { "type": "build", - "name": "stm32f303disco" + "name": "stm32f103ze_iar" } ] }, { - "name": "feather_stm32f405", + "name": "stm32f207nucleo", "steps": [ { "type": "configure", - "name": "feather_stm32f405" + "name": "stm32f207nucleo" }, { "type": "build", - "name": "feather_stm32f405" + "name": "stm32f207nucleo" } ] }, { - "name": "pyboardv11", + "name": "stm32f303disco", "steps": [ { "type": "configure", - "name": "pyboardv11" + "name": "stm32f303disco" }, { "type": "build", - "name": "pyboardv11" + "name": "stm32f303disco" } ] }, @@ -3517,19 +3517,6 @@ } ] }, - { - "name": "stlinkv3mini", - "steps": [ - { - "type": "configure", - "name": "stlinkv3mini" - }, - { - "type": "build", - "name": "stlinkv3mini" - } - ] - }, { "name": "stm32f723disco", "steps": [ @@ -3608,19 +3595,6 @@ } ] }, - { - "name": "b_g474e_dpow1", - "steps": [ - { - "type": "configure", - "name": "b_g474e_dpow1" - }, - { - "type": "build", - "name": "b_g474e_dpow1" - } - ] - }, { "name": "stm32g474nucleo", "steps": [ @@ -3686,19 +3660,6 @@ } ] }, - { - "name": "daisyseed", - "steps": [ - { - "type": "configure", - "name": "daisyseed" - }, - { - "type": "build", - "name": "daisyseed" - } - ] - }, { "name": "stm32h723nucleo", "steps": [ @@ -3751,19 +3712,6 @@ } ] }, - { - "name": "stm32h750bdk", - "steps": [ - { - "type": "configure", - "name": "stm32h750bdk" - }, - { - "type": "build", - "name": "stm32h750bdk" - } - ] - }, { "name": "stm32h750_weact", "steps": [ @@ -3778,15 +3726,15 @@ ] }, { - "name": "waveshare_openh743i", + "name": "stm32h750bdk", "steps": [ { "type": "configure", - "name": "waveshare_openh743i" + "name": "stm32h750bdk" }, { "type": "build", - "name": "waveshare_openh743i" + "name": "stm32h750bdk" } ] }, @@ -3881,19 +3829,6 @@ } ] }, - { - "name": "b_u585i_iot2a", - "steps": [ - { - "type": "configure", - "name": "b_u585i_iot2a" - }, - { - "type": "build", - "name": "b_u585i_iot2a" - } - ] - }, { "name": "stm32u545nucleo", "steps": [ @@ -3960,15 +3895,80 @@ ] }, { - "name": "ek_tm4c123gxl", + "name": "teensy_35", "steps": [ { "type": "configure", - "name": "ek_tm4c123gxl" + "name": "teensy_35" }, { "type": "build", - "name": "ek_tm4c123gxl" + "name": "teensy_35" + } + ] + }, + { + "name": "teensy_40", + "steps": [ + { + "type": "configure", + "name": "teensy_40" + }, + { + "type": "build", + "name": "teensy_40" + } + ] + }, + { + "name": "teensy_41", + "steps": [ + { + "type": "configure", + "name": "teensy_41" + }, + { + "type": "build", + "name": "teensy_41" + } + ] + }, + { + "name": "trinket_m0", + "steps": [ + { + "type": "configure", + "name": "trinket_m0" + }, + { + "type": "build", + "name": "trinket_m0" + } + ] + }, + { + "name": "uno_r4", + "steps": [ + { + "type": "configure", + "name": "uno_r4" + }, + { + "type": "build", + "name": "uno_r4" + } + ] + }, + { + "name": "waveshare_openh743i", + "steps": [ + { + "type": "configure", + "name": "waveshare_openh743i" + }, + { + "type": "build", + "name": "waveshare_openh743i" } ] }, diff --git a/tools/gen_presets.py b/tools/gen_presets.py index 98b1a7d46..7542cfdf5 100755 --- a/tools/gen_presets.py +++ b/tools/gen_presets.py @@ -24,46 +24,57 @@ def main(): {"name": "default", "hidden": True, "description": r"Configure preset for the ${presetName} board", - "generator": "Ninja", + "generator": "Ninja Multi-Config", "binaryDir": r"${sourceDir}/build/${presetName}", "cacheVariables": { - "CMAKE_BUILD_TYPE": "RelWithDebInfo", + "CMAKE_DEFAULT_BUILD_TYPE": "RelWithDebInfo", "BOARD": r"${presetName}" - } - }] + }}] presets['configurePresets'].extend( - [{'name': board, 'inherits': 'default'} for board in board_list] + sorted( + [ + { + 'name': board, + 'inherits': 'default' + } + for board in board_list + ], key=lambda x: x['name'] + ) ) # Build presets # no inheritance since 'name' doesn't support macro expansion - presets['buildPresets'] = [ - { - 'name': board, - 'description': "Build preset for the " + board + " board", - 'configurePreset': board - } - for board in board_list - ] + presets['buildPresets'] = sorted( + [ + { + 'name': board, + 'description': "Build preset for the " + board + " board", + 'configurePreset': board + } + for board in board_list + ], key=lambda x: x['name'] + ) # Workflow presets - presets['workflowPresets'] = [ - { - "name": board, - "steps": [ - { - "type": "configure", - "name": board - }, - { - "type": "build", - "name": board - } - ] - } - for board in board_list - ] + presets['workflowPresets'] = sorted( + [ + { + "name": board, + "steps": [ + { + "type": "configure", + "name": board + }, + { + "type": "build", + "name": board + } + ] + } + for board in board_list + ], key=lambda x: x['name'] + ) with open("hw/bsp/BoardPresets.json", "w") as f: f.write('{}\n'.format(json.dumps(presets, indent=2))) @@ -87,5 +98,6 @@ def main(): print('Generating presets for the following examples:') print(example_list) + if __name__ == "__main__": main() -- cgit v1.3.1 From 14f1feac8412668206e69a1178bd29d569f01994 Mon Sep 17 00:00:00 2001 From: HiFiPhile Date: Tue, 11 Feb 2025 20:56:41 +0100 Subject: Fix path. Signed-off-by: HiFiPhile --- examples/CMakePresets.json | 2 +- examples/device/CMakePresets.json | 2 +- .../device/audio_4_channel_mic_freertos/src/CMakePresets.json | 6 ------ examples/device/audio_test_freertos/src/CMakePresets.json | 6 ------ examples/device/board_test/src/CMakePresets.json | 6 ------ examples/device/cdc_msc_freertos/src/CMakePresets.json | 6 ------ examples/device/hid_composite_freertos/src/CMakePresets.json | 6 ------ examples/device/midi_test_freertos/src/CMakePresets.json | 6 ------ examples/device/video_capture/src/CMakePresets.json | 6 ------ examples/device/video_capture_2ch/src/CMakePresets.json | 6 ------ examples/dual/CMakePresets.json | 2 +- examples/host/CMakePresets.json | 2 +- examples/host/cdc_msc_hid_freertos/src/CMakePresets.json | 6 ------ examples/host/device_info/src/CMakePresets.json | 6 ------ examples/typec/CMakePresets.json | 2 +- tools/gen_presets.py | 10 ++++++---- 16 files changed, 11 insertions(+), 69 deletions(-) delete mode 100644 examples/device/audio_4_channel_mic_freertos/src/CMakePresets.json delete mode 100644 examples/device/audio_test_freertos/src/CMakePresets.json delete mode 100644 examples/device/board_test/src/CMakePresets.json delete mode 100644 examples/device/cdc_msc_freertos/src/CMakePresets.json delete mode 100644 examples/device/hid_composite_freertos/src/CMakePresets.json delete mode 100644 examples/device/midi_test_freertos/src/CMakePresets.json delete mode 100644 examples/device/video_capture/src/CMakePresets.json delete mode 100644 examples/device/video_capture_2ch/src/CMakePresets.json delete mode 100644 examples/host/cdc_msc_hid_freertos/src/CMakePresets.json delete mode 100644 examples/host/device_info/src/CMakePresets.json (limited to 'tools') diff --git a/examples/CMakePresets.json b/examples/CMakePresets.json index 5cd8971e9..2f904a269 100644 --- a/examples/CMakePresets.json +++ b/examples/CMakePresets.json @@ -1,6 +1,6 @@ { "version": 6, "include": [ - "../../../hw/bsp/BoardPresets.json" + "../hw/bsp/BoardPresets.json" ] } diff --git a/examples/device/CMakePresets.json b/examples/device/CMakePresets.json index 5cd8971e9..c22e8c0ec 100644 --- a/examples/device/CMakePresets.json +++ b/examples/device/CMakePresets.json @@ -1,6 +1,6 @@ { "version": 6, "include": [ - "../../../hw/bsp/BoardPresets.json" + "../../hw/bsp/BoardPresets.json" ] } diff --git a/examples/device/audio_4_channel_mic_freertos/src/CMakePresets.json b/examples/device/audio_4_channel_mic_freertos/src/CMakePresets.json deleted file mode 100644 index 5cd8971e9..000000000 --- a/examples/device/audio_4_channel_mic_freertos/src/CMakePresets.json +++ /dev/null @@ -1,6 +0,0 @@ -{ - "version": 6, - "include": [ - "../../../hw/bsp/BoardPresets.json" - ] -} diff --git a/examples/device/audio_test_freertos/src/CMakePresets.json b/examples/device/audio_test_freertos/src/CMakePresets.json deleted file mode 100644 index 5cd8971e9..000000000 --- a/examples/device/audio_test_freertos/src/CMakePresets.json +++ /dev/null @@ -1,6 +0,0 @@ -{ - "version": 6, - "include": [ - "../../../hw/bsp/BoardPresets.json" - ] -} diff --git a/examples/device/board_test/src/CMakePresets.json b/examples/device/board_test/src/CMakePresets.json deleted file mode 100644 index 5cd8971e9..000000000 --- a/examples/device/board_test/src/CMakePresets.json +++ /dev/null @@ -1,6 +0,0 @@ -{ - "version": 6, - "include": [ - "../../../hw/bsp/BoardPresets.json" - ] -} diff --git a/examples/device/cdc_msc_freertos/src/CMakePresets.json b/examples/device/cdc_msc_freertos/src/CMakePresets.json deleted file mode 100644 index 5cd8971e9..000000000 --- a/examples/device/cdc_msc_freertos/src/CMakePresets.json +++ /dev/null @@ -1,6 +0,0 @@ -{ - "version": 6, - "include": [ - "../../../hw/bsp/BoardPresets.json" - ] -} diff --git a/examples/device/hid_composite_freertos/src/CMakePresets.json b/examples/device/hid_composite_freertos/src/CMakePresets.json deleted file mode 100644 index 5cd8971e9..000000000 --- a/examples/device/hid_composite_freertos/src/CMakePresets.json +++ /dev/null @@ -1,6 +0,0 @@ -{ - "version": 6, - "include": [ - "../../../hw/bsp/BoardPresets.json" - ] -} diff --git a/examples/device/midi_test_freertos/src/CMakePresets.json b/examples/device/midi_test_freertos/src/CMakePresets.json deleted file mode 100644 index 5cd8971e9..000000000 --- a/examples/device/midi_test_freertos/src/CMakePresets.json +++ /dev/null @@ -1,6 +0,0 @@ -{ - "version": 6, - "include": [ - "../../../hw/bsp/BoardPresets.json" - ] -} diff --git a/examples/device/video_capture/src/CMakePresets.json b/examples/device/video_capture/src/CMakePresets.json deleted file mode 100644 index 5cd8971e9..000000000 --- a/examples/device/video_capture/src/CMakePresets.json +++ /dev/null @@ -1,6 +0,0 @@ -{ - "version": 6, - "include": [ - "../../../hw/bsp/BoardPresets.json" - ] -} diff --git a/examples/device/video_capture_2ch/src/CMakePresets.json b/examples/device/video_capture_2ch/src/CMakePresets.json deleted file mode 100644 index 5cd8971e9..000000000 --- a/examples/device/video_capture_2ch/src/CMakePresets.json +++ /dev/null @@ -1,6 +0,0 @@ -{ - "version": 6, - "include": [ - "../../../hw/bsp/BoardPresets.json" - ] -} diff --git a/examples/dual/CMakePresets.json b/examples/dual/CMakePresets.json index 5cd8971e9..c22e8c0ec 100644 --- a/examples/dual/CMakePresets.json +++ b/examples/dual/CMakePresets.json @@ -1,6 +1,6 @@ { "version": 6, "include": [ - "../../../hw/bsp/BoardPresets.json" + "../../hw/bsp/BoardPresets.json" ] } diff --git a/examples/host/CMakePresets.json b/examples/host/CMakePresets.json index 5cd8971e9..c22e8c0ec 100644 --- a/examples/host/CMakePresets.json +++ b/examples/host/CMakePresets.json @@ -1,6 +1,6 @@ { "version": 6, "include": [ - "../../../hw/bsp/BoardPresets.json" + "../../hw/bsp/BoardPresets.json" ] } diff --git a/examples/host/cdc_msc_hid_freertos/src/CMakePresets.json b/examples/host/cdc_msc_hid_freertos/src/CMakePresets.json deleted file mode 100644 index 5cd8971e9..000000000 --- a/examples/host/cdc_msc_hid_freertos/src/CMakePresets.json +++ /dev/null @@ -1,6 +0,0 @@ -{ - "version": 6, - "include": [ - "../../../hw/bsp/BoardPresets.json" - ] -} diff --git a/examples/host/device_info/src/CMakePresets.json b/examples/host/device_info/src/CMakePresets.json deleted file mode 100644 index 5cd8971e9..000000000 --- a/examples/host/device_info/src/CMakePresets.json +++ /dev/null @@ -1,6 +0,0 @@ -{ - "version": 6, - "include": [ - "../../../hw/bsp/BoardPresets.json" - ] -} diff --git a/examples/typec/CMakePresets.json b/examples/typec/CMakePresets.json index 5cd8971e9..c22e8c0ec 100644 --- a/examples/typec/CMakePresets.json +++ b/examples/typec/CMakePresets.json @@ -1,6 +1,6 @@ { "version": 6, "include": [ - "../../../hw/bsp/BoardPresets.json" + "../../hw/bsp/BoardPresets.json" ] } diff --git a/tools/gen_presets.py b/tools/gen_presets.py index 7542cfdf5..94b8d16b0 100755 --- a/tools/gen_presets.py +++ b/tools/gen_presets.py @@ -1,7 +1,7 @@ #!/usr/bin/env python3 import os import json - +from pathlib import Path def main(): board_list = [] @@ -76,21 +76,23 @@ def main(): ], key=lambda x: x['name'] ) - with open("hw/bsp/BoardPresets.json", "w") as f: + path_boardpresets = "hw/bsp/BoardPresets.json" + with open(path_boardpresets, "w") as f: f.write('{}\n'.format(json.dumps(presets, indent=2))) # Generate presets for examples presets = { "version": 6, "include": [ - "../../../hw/bsp/BoardPresets.json" ] } example_list = [] for root, dirs, files in os.walk("examples"): for file in files: - if file == "CMakeLists.txt": + # Filter out ESP-IDF CMakeLists.txt in src folder + if file == "CMakeLists.txt" and os.path.basename(root) != 'src': + presets['include'] = [os.path.relpath(path_boardpresets, root).replace(os.sep, '/')] with open(os.path.join(root, 'CMakePresets.json'), 'w') as f: f.write('{}\n'.format(json.dumps(presets, indent=2))) example_list.append(os.path.basename(root)) -- cgit v1.3.1 From 18d566b94c8f17d9df04914979997d589b905290 Mon Sep 17 00:00:00 2001 From: hathach Date: Mon, 17 Feb 2025 17:06:51 +0700 Subject: improve hub: retry if hub interrupt endpoint failed bump up pio-usb to latest --- src/host/hub.c | 180 +++++++++++++++++++++++++----------------------------- src/host/hub.h | 51 ++++++++-------- src/host/usbh.c | 8 +-- tools/get_deps.py | 9 ++- 4 files changed, 118 insertions(+), 130 deletions(-) (limited to 'tools') diff --git a/src/host/hub.c b/src/host/hub.c index e97014443..611bf71be 100644 --- a/src/host/hub.c +++ b/src/host/hub.c @@ -40,29 +40,37 @@ //--------------------------------------------------------------------+ // MACRO CONSTANT TYPEDEF //--------------------------------------------------------------------+ -typedef struct -{ +typedef struct { uint8_t itf_num; uint8_t ep_in; - uint8_t port_count; + + // from hub descriptor + uint8_t bNbrPorts; + // uint8_t bPwrOn2PwrGood; + // uint16_t wHubCharacteristics; CFG_TUH_MEM_ALIGN uint8_t status_change; CFG_TUH_MEM_ALIGN hub_port_status_response_t port_status; CFG_TUH_MEM_ALIGN hub_status_response_t hub_status; } hub_interface_t; -CFG_TUH_MEM_SECTION static hub_interface_t hub_data[CFG_TUH_HUB]; -CFG_TUH_MEM_SECTION CFG_TUH_MEM_ALIGN static uint8_t _hub_buffer[sizeof(descriptor_hub_desc_t)]; +typedef struct { + TUH_EPBUF_DEF(buf, CFG_TUH_HUB_BUFSIZE); +} hub_epbuf_t; -TU_ATTR_ALWAYS_INLINE -static inline hub_interface_t* get_itf(uint8_t dev_addr) -{ - return &hub_data[dev_addr-1-CFG_TUH_DEVICE_MAX]; +CFG_TUH_MEM_SECTION static hub_interface_t hub_itfs[CFG_TUH_HUB]; +CFG_TUH_MEM_SECTION static hub_epbuf_t hub_epbufs[CFG_TUH_HUB]; + +TU_ATTR_ALWAYS_INLINE static inline hub_interface_t* get_hub_itf(uint8_t daddr) { + return &hub_itfs[daddr-1-CFG_TUH_DEVICE_MAX]; } -#if CFG_TUSB_DEBUG >= 2 -static char const* const _hub_feature_str[] = -{ +TU_ATTR_ALWAYS_INLINE static inline uint8_t* get_hub_epbuf(uint8_t daddr) { + return hub_epbufs[daddr-1-CFG_TUH_DEVICE_MAX].buf; +} + +#if CFG_TUSB_DEBUG >= HUB_DEBUG +static char const* const _hub_feature_str[] = { [HUB_FEATURE_PORT_CONNECTION ] = "PORT_CONNECTION", [HUB_FEATURE_PORT_ENABLE ] = "PORT_ENABLE", [HUB_FEATURE_PORT_SUSPEND ] = "PORT_SUSPEND", @@ -84,12 +92,9 @@ static char const* const _hub_feature_str[] = // HUB //--------------------------------------------------------------------+ bool hub_port_clear_feature(uint8_t hub_addr, uint8_t hub_port, uint8_t feature, - tuh_xfer_cb_t complete_cb, uintptr_t user_data) -{ - tusb_control_request_t const request = - { - .bmRequestType_bit = - { + tuh_xfer_cb_t complete_cb, uintptr_t user_data) { + tusb_control_request_t const request = { + .bmRequestType_bit = { .recipient = (hub_port == 0) ? TUSB_REQ_RCPT_DEVICE : TUSB_REQ_RCPT_OTHER, .type = TUSB_REQ_TYPE_CLASS, .direction = TUSB_DIR_OUT @@ -100,8 +105,7 @@ bool hub_port_clear_feature(uint8_t hub_addr, uint8_t hub_port, uint8_t feature, .wLength = 0 }; - tuh_xfer_t xfer = - { + tuh_xfer_t xfer = { .daddr = hub_addr, .ep_addr = 0, .setup = &request, @@ -110,7 +114,7 @@ bool hub_port_clear_feature(uint8_t hub_addr, uint8_t hub_port, uint8_t feature, .user_data = user_data }; - TU_LOG2("HUB Clear Feature: %s, addr = %u port = %u\r\n", _hub_feature_str[feature], hub_addr, hub_port); + TU_LOG_DRV("HUB Clear Feature: %s, addr = %u port = %u\r\n", _hub_feature_str[feature], hub_addr, hub_port); TU_ASSERT( tuh_control_xfer(&xfer) ); return true; } @@ -142,7 +146,7 @@ bool hub_port_set_feature(uint8_t hub_addr, uint8_t hub_port, uint8_t feature, .user_data = user_data }; - TU_LOG2("HUB Set Feature: %s, addr = %u port = %u\r\n", _hub_feature_str[feature], hub_addr, hub_port); + TU_LOG_DRV("HUB Set Feature: %s, addr = %u port = %u\r\n", _hub_feature_str[feature], hub_addr, hub_port); TU_ASSERT( tuh_control_xfer(&xfer) ); return true; } @@ -174,7 +178,7 @@ bool hub_port_get_status(uint8_t hub_addr, uint8_t hub_port, void* resp, .user_data = user_data }; - TU_LOG2("HUB Get Port Status: addr = %u port = %u\r\n", hub_addr, hub_port); + TU_LOG_DRV("HUB Get Port Status: addr = %u port = %u\r\n", hub_addr, hub_port); TU_VERIFY( tuh_control_xfer(&xfer) ); return true; } @@ -183,7 +187,7 @@ bool hub_port_get_status(uint8_t hub_addr, uint8_t hub_port, void* resp, // CLASS-USBH API (don't require to verify parameters) //--------------------------------------------------------------------+ bool hub_init(void) { - tu_memclr(hub_data, sizeof(hub_data)); + tu_memclr(hub_itfs, sizeof(hub_itfs)); return true; } @@ -191,40 +195,32 @@ bool hub_deinit(void) { return true; } -bool hub_open(uint8_t rhport, uint8_t dev_addr, tusb_desc_interface_t const *itf_desc, uint16_t max_len) -{ +bool hub_open(uint8_t rhport, uint8_t dev_addr, tusb_desc_interface_t const *itf_desc, uint16_t max_len) { (void) rhport; TU_VERIFY(TUSB_CLASS_HUB == itf_desc->bInterfaceClass && 0 == itf_desc->bInterfaceSubClass); + TU_VERIFY(itf_desc->bInterfaceProtocol <= 1); // not support multiple TT yet - // hub driver does not support multiple TT yet - TU_VERIFY(itf_desc->bInterfaceProtocol <= 1); - - // msc driver length is fixed uint16_t const drv_len = sizeof(tusb_desc_interface_t) + sizeof(tusb_desc_endpoint_t); TU_ASSERT(drv_len <= max_len); - //------------- Interrupt Status endpoint -------------// + // Interrupt Status endpoint tusb_desc_endpoint_t const *desc_ep = (tusb_desc_endpoint_t const *) tu_desc_next(itf_desc); - TU_ASSERT(TUSB_DESC_ENDPOINT == desc_ep->bDescriptorType && TUSB_XFER_INTERRUPT == desc_ep->bmAttributes.xfer, 0); - TU_ASSERT(tuh_edpt_open(dev_addr, desc_ep)); - hub_interface_t* p_hub = get_itf(dev_addr); - + hub_interface_t* p_hub = get_hub_itf(dev_addr); p_hub->itf_num = itf_desc->bInterfaceNumber; p_hub->ep_in = desc_ep->bEndpointAddress; return true; } -void hub_close(uint8_t dev_addr) -{ +void hub_close(uint8_t dev_addr) { TU_VERIFY(dev_addr > CFG_TUH_DEVICE_MAX, ); - hub_interface_t* p_hub = get_itf(dev_addr); + hub_interface_t* p_hub = get_hub_itf(dev_addr); if (p_hub->ep_in) { TU_LOG_DRV(" HUB close addr = %d\r\n", dev_addr); @@ -232,30 +228,24 @@ void hub_close(uint8_t dev_addr) } } -bool hub_edpt_status_xfer(uint8_t dev_addr) -{ - hub_interface_t* hub_itf = get_itf(dev_addr); +bool hub_edpt_status_xfer(uint8_t dev_addr) { + hub_interface_t* hub_itf = get_hub_itf(dev_addr); return usbh_edpt_xfer(dev_addr, hub_itf->ep_in, &hub_itf->status_change, 1); } - //--------------------------------------------------------------------+ // Set Configure //--------------------------------------------------------------------+ - static void config_set_port_power (tuh_xfer_t* xfer); static void config_port_power_complete (tuh_xfer_t* xfer); -bool hub_set_config(uint8_t dev_addr, uint8_t itf_num) -{ - hub_interface_t* p_hub = get_itf(dev_addr); +bool hub_set_config(uint8_t dev_addr, uint8_t itf_num) { + hub_interface_t* p_hub = get_hub_itf(dev_addr); TU_ASSERT(itf_num == p_hub->itf_num); // Get Hub Descriptor - tusb_control_request_t const request = - { - .bmRequestType_bit = - { + tusb_control_request_t const request = { + .bmRequestType_bit = { .recipient = TUSB_REQ_RCPT_DEVICE, .type = TUSB_REQ_TYPE_CLASS, .direction = TUSB_DIR_IN @@ -263,34 +253,31 @@ bool hub_set_config(uint8_t dev_addr, uint8_t itf_num) .bRequest = HUB_REQUEST_GET_DESCRIPTOR, .wValue = 0, .wIndex = 0, - .wLength = sizeof(descriptor_hub_desc_t) + .wLength = sizeof(hub_desc_cs_t) }; - tuh_xfer_t xfer = - { + tuh_xfer_t xfer = { .daddr = dev_addr, .ep_addr = 0, .setup = &request, - .buffer = _hub_buffer, + .buffer = get_hub_epbuf(dev_addr), .complete_cb = config_set_port_power, .user_data = 0 }; - TU_ASSERT( tuh_control_xfer(&xfer) ); - + TU_ASSERT(tuh_control_xfer(&xfer)); return true; } -static void config_set_port_power (tuh_xfer_t* xfer) -{ +static void config_set_port_power (tuh_xfer_t* xfer) { TU_ASSERT(XFER_RESULT_SUCCESS == xfer->result, ); uint8_t const daddr = xfer->daddr; - hub_interface_t* p_hub = get_itf(daddr); + hub_interface_t* p_hub = get_hub_itf(daddr); // only use number of ports in hub descriptor - descriptor_hub_desc_t const* desc_hub = (descriptor_hub_desc_t const*) _hub_buffer; - p_hub->port_count = desc_hub->bNbrPorts; + hub_desc_cs_t const* desc_hub = (hub_desc_cs_t const*) get_hub_epbuf(daddr); + p_hub->bNbrPorts = desc_hub->bNbrPorts; // May need to GET_STATUS @@ -299,14 +286,13 @@ static void config_set_port_power (tuh_xfer_t* xfer) hub_port_set_feature(daddr, hub_port, HUB_FEATURE_PORT_POWER, config_port_power_complete, 0); } -static void config_port_power_complete (tuh_xfer_t* xfer) -{ +static void config_port_power_complete (tuh_xfer_t* xfer) { TU_ASSERT(XFER_RESULT_SUCCESS == xfer->result, ); uint8_t const daddr = xfer->daddr; - hub_interface_t* p_hub = get_itf(daddr); + hub_interface_t* p_hub = get_hub_itf(daddr); - if (xfer->setup->wIndex == p_hub->port_count) + if (xfer->setup->wIndex == p_hub->bNbrPorts) { // All ports are power -> queue notification status endpoint and // complete the SET CONFIGURATION @@ -334,46 +320,48 @@ static void connection_port_reset_complete (tuh_xfer_t* xfer); bool hub_xfer_cb(uint8_t dev_addr, uint8_t ep_addr, xfer_result_t result, uint32_t xferred_bytes) { (void) xferred_bytes; // TODO can be more than 1 for hub with lots of ports (void) ep_addr; - TU_VERIFY(result == XFER_RESULT_SUCCESS); - hub_interface_t* p_hub = get_itf(dev_addr); + if (result == XFER_RESULT_SUCCESS) { + hub_interface_t* p_hub = get_hub_itf(dev_addr); - uint8_t const status_change = p_hub->status_change; - TU_LOG2(" Hub Status Change = 0x%02X\r\n", status_change); + uint8_t const status_change = p_hub->status_change; + TU_LOG_DRV(" Hub Status Change = 0x%02X\r\n", status_change); - if ( status_change == 0 ) { - // The status change event was neither for the hub, nor for any of its ports. - // This shouldn't happen, but it does with some devices. - // Initiate the next interrupt poll here. - return hub_edpt_status_xfer(dev_addr); - } + if ( status_change == 0 ) { + // The status change event was neither for the hub, nor for any of its ports. + // This shouldn't happen, but it does with some devices. Initiate the next interrupt poll here. + return hub_edpt_status_xfer(dev_addr); + } - if (tu_bit_test(status_change, 0)) { - // Hub bit 0 is for the hub device events - if (hub_port_get_status(dev_addr, 0, &p_hub->hub_status, hub_get_status_complete, 0) == false) { - //Hub status control transfer failed, retry - hub_edpt_status_xfer(dev_addr); + if (tu_bit_test(status_change, 0)) { + // Hub bit 0 is for the hub device events + if (hub_port_get_status(dev_addr, 0, &p_hub->hub_status, hub_get_status_complete, 0) == false) { + //Hub status control transfer failed, retry + hub_edpt_status_xfer(dev_addr); + } } - } - else { - // Hub bits 1 to n are hub port events - for (uint8_t port=1; port <= p_hub->port_count; port++) { - if ( tu_bit_test(status_change, port) ) { - if (hub_port_get_status(dev_addr, port, &p_hub->port_status, hub_port_get_status_complete, 0) == false) { - //Hub status control transfer failed, retry - hub_edpt_status_xfer(dev_addr); + else { + // Hub bits 1 to n are hub port events + for (uint8_t port=1; port <= p_hub->bNbrPorts; port++) { + if ( tu_bit_test(status_change, port) ) { + if (hub_port_get_status(dev_addr, port, &p_hub->port_status, hub_port_get_status_complete, 0) == false) { + //Hub status control transfer failed, retry + hub_edpt_status_xfer(dev_addr); + } + break; } - break; } } + } else { + TU_LOG_DRV(" Hub Status Change: failed, retry\r\n"); + hub_edpt_status_xfer(dev_addr); // retry } // NOTE: next status transfer is queued by usbh.c after handling this request return true; } -static void hub_clear_feature_complete_stub(tuh_xfer_t* xfer) -{ +static void hub_clear_feature_complete_stub(tuh_xfer_t* xfer) { TU_ASSERT(xfer->result == XFER_RESULT_SUCCESS, ); hub_edpt_status_xfer(xfer->daddr); } @@ -383,15 +371,15 @@ static void hub_get_status_complete (tuh_xfer_t* xfer) TU_ASSERT(xfer->result == XFER_RESULT_SUCCESS, ); uint8_t const daddr = xfer->daddr; - hub_interface_t* p_hub = get_itf(daddr); + hub_interface_t* p_hub = get_hub_itf(daddr); uint8_t const port_num = (uint8_t) tu_le16toh(xfer->setup->wIndex); TU_ASSERT(port_num == 0 , ); - TU_LOG2("HUB Got hub status, addr = %u, status = %04x\r\n", daddr, p_hub->hub_status.change.value); + TU_LOG_DRV("HUB Got hub status, addr = %u, status = %04x\r\n", daddr, p_hub->hub_status.change.value); if (p_hub->hub_status.change.local_power_source) { - TU_LOG2("HUB Local Power Change, addr = %u\r\n", daddr); + TU_LOG_DRV("HUB Local Power Change, addr = %u\r\n", daddr); hub_port_clear_feature(daddr, port_num, HUB_FEATURE_HUB_LOCAL_POWER_CHANGE, hub_clear_feature_complete_stub, 0); } else if (p_hub->hub_status.change.over_current) @@ -406,7 +394,7 @@ static void hub_port_get_status_complete (tuh_xfer_t* xfer) TU_ASSERT(xfer->result == XFER_RESULT_SUCCESS, ); uint8_t const daddr = xfer->daddr; - hub_interface_t* p_hub = get_itf(daddr); + hub_interface_t* p_hub = get_hub_itf(daddr); uint8_t const port_num = (uint8_t) tu_le16toh(xfer->setup->wIndex); // Connection change @@ -453,7 +441,7 @@ static void connection_clear_conn_change_complete (tuh_xfer_t* xfer) TU_ASSERT(xfer->result == XFER_RESULT_SUCCESS, ); uint8_t const daddr = xfer->daddr; - hub_interface_t* p_hub = get_itf(daddr); + hub_interface_t* p_hub = get_hub_itf(daddr); uint8_t const port_num = (uint8_t) tu_le16toh(xfer->setup->wIndex); if ( p_hub->port_status.status.connection ) diff --git a/src/host/hub.h b/src/host/hub.h index 385efe6b2..59097fb0a 100644 --- a/src/host/hub.h +++ b/src/host/hub.h @@ -24,17 +24,8 @@ * This file is part of the TinyUSB stack. */ -/** \ingroup group_class - * \defgroup ClassDriver_Hub Hub (Host only) - * \details Like most PC's OS, Hub support is completely hidden from Application. In fact, application cannot determine whether - * a device is mounted directly via roothub or via a hub's port. All Hub-related procedures are performed and managed - * by tinyusb stack. Unless you are trying to develop the stack itself, there are nothing else can be used by Application. - * \note Due to my laziness, only 1-level of Hub is supported. In other way, the stack cannot mount a hub via another hub. - * @{ - */ - -#ifndef _TUSB_HUB_H_ -#define _TUSB_HUB_H_ +#ifndef TUSB_HUB_H_ +#define TUSB_HUB_H_ #include "common/tusb_common.h" @@ -42,6 +33,14 @@ extern "C" { #endif +//--------------------------------------------------------------------+ +// Configuration +//--------------------------------------------------------------------+ + +#ifndef CFG_TUH_HUB_BUFSIZE + #define CFG_TUH_HUB_BUFSIZE 12 +#endif + //D1...D0: Logical Power Switching Mode //00: Ganged power switching (all ports’power at //once) @@ -89,16 +88,17 @@ typedef struct TU_ATTR_PACKED{ uint8_t bHubContrCurrent; uint8_t DeviceRemovable; // bitmap each bit for a port (from bit1) uint8_t PortPwrCtrlMask; // just for compatibility, should be 0xff -} descriptor_hub_desc_t; +} hub_desc_cs_t; -TU_VERIFY_STATIC( sizeof(descriptor_hub_desc_t) == 9, "size is not correct"); +TU_VERIFY_STATIC(sizeof(hub_desc_cs_t) == 9, "size is not correct"); +TU_VERIFY_STATIC(CFG_TUH_HUB_BUFSIZE >= sizeof(hub_desc_cs_t), "buffer is not big enough"); enum { HUB_REQUEST_GET_STATUS = 0 , HUB_REQUEST_CLEAR_FEATURE = 1 , - + // 2 is reserved HUB_REQUEST_SET_FEATURE = 3 , - + // 4-5 are reserved HUB_REQUEST_GET_DESCRIPTOR = 6 , HUB_REQUEST_SET_DESCRIPTOR = 7 , HUB_REQUEST_CLEAR_TT_BUFFER = 8 , @@ -118,10 +118,10 @@ enum{ HUB_FEATURE_PORT_SUSPEND = 2, HUB_FEATURE_PORT_OVER_CURRENT = 3, HUB_FEATURE_PORT_RESET = 4, - + // 5-7 are reserved HUB_FEATURE_PORT_POWER = 8, HUB_FEATURE_PORT_LOW_SPEED = 9, - + // 10-15 are reserved HUB_FEATURE_PORT_CONNECTION_CHANGE = 16, HUB_FEATURE_PORT_ENABLE_CHANGE = 17, HUB_FEATURE_PORT_SUSPEND_CHANGE = 18, @@ -172,16 +172,16 @@ typedef struct { TU_VERIFY_STATIC( sizeof(hub_port_status_response_t) == 4, "size is not correct"); // Clear feature -bool hub_port_clear_feature (uint8_t hub_addr, uint8_t hub_port, uint8_t feature, - tuh_xfer_cb_t complete_cb, uintptr_t user_data); +bool hub_port_clear_feature(uint8_t hub_addr, uint8_t hub_port, uint8_t feature, + tuh_xfer_cb_t complete_cb, uintptr_t user_data); // Set feature -bool hub_port_set_feature (uint8_t hub_addr, uint8_t hub_port, uint8_t feature, - tuh_xfer_cb_t complete_cb, uintptr_t user_data); +bool hub_port_set_feature(uint8_t hub_addr, uint8_t hub_port, uint8_t feature, + tuh_xfer_cb_t complete_cb, uintptr_t user_data); // Get port status -bool hub_port_get_status (uint8_t hub_addr, uint8_t hub_port, void* resp, - tuh_xfer_cb_t complete_cb, uintptr_t user_data); +bool hub_port_get_status(uint8_t hub_addr, uint8_t hub_port, void *resp, + tuh_xfer_cb_t complete_cb, uintptr_t user_data); // Get status from Interrupt endpoint bool hub_edpt_status_xfer(uint8_t dev_addr); @@ -198,7 +198,6 @@ bool hub_port_clear_reset_change(uint8_t hub_addr, uint8_t hub_port, tuh_xfer_cb return hub_port_clear_feature(hub_addr, hub_port, HUB_FEATURE_PORT_RESET_CHANGE, complete_cb, user_data); } - //--------------------------------------------------------------------+ // Internal Class Driver API //--------------------------------------------------------------------+ @@ -213,6 +212,4 @@ void hub_close (uint8_t dev_addr); } #endif -#endif /* _TUSB_HUB_H_ */ - -/** @} */ +#endif diff --git a/src/host/usbh.c b/src/host/usbh.c index a2994cde7..5f4f17167 100644 --- a/src/host/usbh.c +++ b/src/host/usbh.c @@ -467,13 +467,11 @@ bool tuh_task_event_ready(void) { * This should be called periodically within the mainloop or rtos thread. * @code - int main(void) - { + int main(void) { application_init(); tusb_init(0, TUSB_ROLE_HOST); - while(1) // the mainloop - { + while(1) { // the mainloop application_code(); tuh_task(); // tinyusb host task } @@ -1657,7 +1655,7 @@ static bool _parse_configuration_descriptor(uint8_t dev_addr, tusb_desc_configur if ( 0 == tu_desc_len(p_desc) ) { // A zero length descriptor indicates that the device is off spec (e.g. wrong wTotalLength). // Parsed interfaces should still be usable - TU_LOG_USBH("Encountered a zero-length descriptor after %u bytes\r\n", (uint32_t)p_desc - (uint32_t)desc_cfg); + TU_LOG_USBH("Encountered a zero-length descriptor after %" PRIu32 "bytes\r\n", (uint32_t)p_desc - (uint32_t)desc_cfg); break; } diff --git a/tools/get_deps.py b/tools/get_deps.py index c8459c1f1..3665904b3 100755 --- a/tools/get_deps.py +++ b/tools/get_deps.py @@ -59,7 +59,7 @@ deps_optional = { '144f1eb7ea8c06512e12f12b27383601c0272410', 'kinetis_k kinetis_k32l2 kinetis_kl lpc51 lpc54 lpc55 mcx imxrt'], 'hw/mcu/raspberry_pi/Pico-PIO-USB': ['https://github.com/sekigon-gonnoc/Pico-PIO-USB.git', - 'fe9133fc513b82cc3dc62c67cb51f2339cf29ef7', + '442af432568f25fb72c5784d9d67b8e85465cb28', 'rp2040'], 'hw/mcu/renesas/fsp': ['https://github.com/renesas/fsp.git', 'edcc97d684b6f716728a60d7a6fea049d9870bd6', @@ -217,7 +217,12 @@ TOP = Path(__file__).parent.parent.resolve() def run_cmd(cmd): - return subprocess.run(cmd, shell=True, stdout=subprocess.PIPE, stderr=subprocess.STDOUT) + r = subprocess.run(cmd, shell=True, stdout=subprocess.PIPE, stderr=subprocess.STDOUT) + title = f'Command Error: {cmd}' + if r.returncode != 0: + print(title) + print(r.stdout.decode("utf-8")) + return r def get_a_dep(d): -- cgit v1.3.1 From cafc788508834b71248a91773a262542fc2cad37 Mon Sep 17 00:00:00 2001 From: hathach Date: Thu, 20 Feb 2025 16:01:06 +0700 Subject: change pio-usb to wip fork for testing --- hw/bsp/rp2040/boards/adafruit_feather_rp2040_usb_host/board.cmake | 2 ++ tools/get_deps.py | 4 ++-- 2 files changed, 4 insertions(+), 2 deletions(-) create mode 100644 hw/bsp/rp2040/boards/adafruit_feather_rp2040_usb_host/board.cmake (limited to 'tools') diff --git a/hw/bsp/rp2040/boards/adafruit_feather_rp2040_usb_host/board.cmake b/hw/bsp/rp2040/boards/adafruit_feather_rp2040_usb_host/board.cmake new file mode 100644 index 000000000..41897f644 --- /dev/null +++ b/hw/bsp/rp2040/boards/adafruit_feather_rp2040_usb_host/board.cmake @@ -0,0 +1,2 @@ +set(PICO_PLATFORM rp2040) +set(PICO_BOARD adafruit_feather_rp2040_usb_host) diff --git a/tools/get_deps.py b/tools/get_deps.py index 3665904b3..b82abac4f 100755 --- a/tools/get_deps.py +++ b/tools/get_deps.py @@ -58,8 +58,8 @@ deps_optional = { 'hw/mcu/nxp/mcux-sdk': ['https://github.com/hathach/mcux-sdk.git', '144f1eb7ea8c06512e12f12b27383601c0272410', 'kinetis_k kinetis_k32l2 kinetis_kl lpc51 lpc54 lpc55 mcx imxrt'], - 'hw/mcu/raspberry_pi/Pico-PIO-USB': ['https://github.com/sekigon-gonnoc/Pico-PIO-USB.git', - '442af432568f25fb72c5784d9d67b8e85465cb28', + 'hw/mcu/raspberry_pi/Pico-PIO-USB': ['https://github.com/hathach/Pico-PIO-USB.git', + '9c8df3083b62c0a678f3bd3d8a7e773932622d4b', 'rp2040'], 'hw/mcu/renesas/fsp': ['https://github.com/renesas/fsp.git', 'edcc97d684b6f716728a60d7a6fea049d9870bd6', -- cgit v1.3.1 From e0df20f260a6c5d5e347427e9e57e73f9327f8d0 Mon Sep 17 00:00:00 2001 From: Ha Thach Date: Mon, 17 Mar 2025 12:20:49 +0700 Subject: change pio-usb to upstream --- tools/get_deps.py | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'tools') diff --git a/tools/get_deps.py b/tools/get_deps.py index b82abac4f..3f529bd7e 100755 --- a/tools/get_deps.py +++ b/tools/get_deps.py @@ -58,8 +58,8 @@ deps_optional = { 'hw/mcu/nxp/mcux-sdk': ['https://github.com/hathach/mcux-sdk.git', '144f1eb7ea8c06512e12f12b27383601c0272410', 'kinetis_k kinetis_k32l2 kinetis_kl lpc51 lpc54 lpc55 mcx imxrt'], - 'hw/mcu/raspberry_pi/Pico-PIO-USB': ['https://github.com/hathach/Pico-PIO-USB.git', - '9c8df3083b62c0a678f3bd3d8a7e773932622d4b', + 'hw/mcu/raspberry_pi/Pico-PIO-USB': ['https://github.com/sekigon-gonnoc/Pico-PIO-USB.git', + '0ca3657d55ea20e7fa4483bbd21ce951bc1d6fa5', 'rp2040'], 'hw/mcu/renesas/fsp': ['https://github.com/renesas/fsp.git', 'edcc97d684b6f716728a60d7a6fea049d9870bd6', -- cgit v1.3.1 From 65e01fff2e7ab5302baa45bdd81a1d774e269452 Mon Sep 17 00:00:00 2001 From: hathach Date: Tue, 25 Mar 2025 16:15:58 +0700 Subject: add tuh_edpt_close() API, it will abort any pending transfer implement hcd_edpt_close() for pio-usb and max3421e, also move max3421e api into its own header. --- examples/host/bare_api/src/main.c | 254 +++++++++++-------------- src/host/hcd.h | 3 + src/host/usbh.c | 6 + src/host/usbh.h | 7 + src/portable/analog/max3421/hcd_max3421.c | 40 ++-- src/portable/analog/max3421/hcd_max3421.h | 63 ++++++ src/portable/raspberrypi/pio_usb/hcd_pio_usb.c | 5 + tools/get_deps.py | 4 +- 8 files changed, 218 insertions(+), 164 deletions(-) create mode 100644 src/portable/analog/max3421/hcd_max3421.h (limited to 'tools') diff --git a/examples/host/bare_api/src/main.c b/examples/host/bare_api/src/main.c index f582f4f5a..0c76ff0c9 100644 --- a/examples/host/bare_api/src/main.c +++ b/examples/host/bare_api/src/main.c @@ -55,16 +55,15 @@ uint8_t* get_hid_buf(uint8_t daddr); void free_hid_buf(uint8_t daddr); /*------------- MAIN -------------*/ -int main(void) -{ +int main(void) { board_init(); printf("TinyUSB Bare API Example\r\n"); // init host stack on configured roothub port tusb_rhport_init_t host_init = { - .role = TUSB_ROLE_HOST, - .speed = TUSB_SPEED_AUTO + .role = TUSB_ROLE_HOST, + .speed = TUSB_SPEED_AUTO }; tusb_init(BOARD_TUH_RHPORT, &host_init); @@ -72,8 +71,7 @@ int main(void) board_init_after_tusb(); } - while (1) - { + while (1) { // tinyusb host task tuh_task(); led_blinking_task(); @@ -85,8 +83,7 @@ int main(void) /*------------- TinyUSB Callbacks -------------*/ // Invoked when device is mounted (configured) -void tuh_mount_cb (uint8_t daddr) -{ +void tuh_mount_cb(uint8_t daddr) { printf("Device attached, address = %d\r\n", daddr); // Get Device Descriptor @@ -95,8 +92,7 @@ void tuh_mount_cb (uint8_t daddr) } /// Invoked when device is unmounted (bus reset/unplugged) -void tuh_umount_cb(uint8_t daddr) -{ +void tuh_umount_cb(uint8_t daddr) { printf("Device removed, address = %d\r\n", daddr); free_hid_buf(daddr); } @@ -104,11 +100,8 @@ void tuh_umount_cb(uint8_t daddr) //--------------------------------------------------------------------+ // Device Descriptor //--------------------------------------------------------------------+ - -void print_device_descriptor(tuh_xfer_t* xfer) -{ - if ( XFER_RESULT_SUCCESS != xfer->result ) - { +void print_device_descriptor(tuh_xfer_t *xfer) { + if (XFER_RESULT_SUCCESS != xfer->result) { printf("Failed to get device descriptor\r\n"); return; } @@ -131,33 +124,29 @@ void print_device_descriptor(tuh_xfer_t* xfer) // Get String descriptor using Sync API uint16_t temp_buf[128]; - printf(" iManufacturer %u " , desc_device.iManufacturer); - if (XFER_RESULT_SUCCESS == tuh_descriptor_get_manufacturer_string_sync(daddr, LANGUAGE_ID, temp_buf, sizeof(temp_buf)) ) - { + printf(" iManufacturer %u ", desc_device.iManufacturer); + if (XFER_RESULT_SUCCESS == tuh_descriptor_get_manufacturer_string_sync(daddr, LANGUAGE_ID, temp_buf, sizeof(temp_buf))) { print_utf16(temp_buf, TU_ARRAY_SIZE(temp_buf)); } printf("\r\n"); - printf(" iProduct %u " , desc_device.iProduct); - if (XFER_RESULT_SUCCESS == tuh_descriptor_get_product_string_sync(daddr, LANGUAGE_ID, temp_buf, sizeof(temp_buf))) - { + printf(" iProduct %u ", desc_device.iProduct); + if (XFER_RESULT_SUCCESS == tuh_descriptor_get_product_string_sync(daddr, LANGUAGE_ID, temp_buf, sizeof(temp_buf))) { print_utf16(temp_buf, TU_ARRAY_SIZE(temp_buf)); } printf("\r\n"); - printf(" iSerialNumber %u " , desc_device.iSerialNumber); - if (XFER_RESULT_SUCCESS == tuh_descriptor_get_serial_string_sync(daddr, LANGUAGE_ID, temp_buf, sizeof(temp_buf))) - { + printf(" iSerialNumber %u ", desc_device.iSerialNumber); + if (XFER_RESULT_SUCCESS == tuh_descriptor_get_serial_string_sync(daddr, LANGUAGE_ID, temp_buf, sizeof(temp_buf))) { print_utf16(temp_buf, TU_ARRAY_SIZE(temp_buf)); } printf("\r\n"); - printf(" bNumConfigurations %u\r\n" , desc_device.bNumConfigurations); + printf(" bNumConfigurations %u\r\n", desc_device.bNumConfigurations); // Get configuration descriptor with sync API - if (XFER_RESULT_SUCCESS == tuh_descriptor_get_configuration_sync(daddr, 0, temp_buf, sizeof(temp_buf))) - { - parse_config_descriptor(daddr, (tusb_desc_configuration_t*) temp_buf); + if (XFER_RESULT_SUCCESS == tuh_descriptor_get_configuration_sync(daddr, 0, temp_buf, sizeof(temp_buf))) { + parse_config_descriptor(daddr, (tusb_desc_configuration_t *) temp_buf); } } @@ -171,37 +160,33 @@ uint16_t count_interface_total_len(tusb_desc_interface_t const* desc_itf, uint8_ void open_hid_interface(uint8_t daddr, tusb_desc_interface_t const *desc_itf, uint16_t max_len); // simple configuration parser to open and listen to HID Endpoint IN -void parse_config_descriptor(uint8_t dev_addr, tusb_desc_configuration_t const* desc_cfg) -{ - uint8_t const* desc_end = ((uint8_t const*) desc_cfg) + tu_le16toh(desc_cfg->wTotalLength); - uint8_t const* p_desc = tu_desc_next(desc_cfg); +void parse_config_descriptor(uint8_t dev_addr, tusb_desc_configuration_t const *desc_cfg) { + uint8_t const *desc_end = ((uint8_t const *) desc_cfg) + tu_le16toh(desc_cfg->wTotalLength); + uint8_t const *p_desc = tu_desc_next(desc_cfg); // parse each interfaces - while( p_desc < desc_end ) - { + while (p_desc < desc_end) { uint8_t assoc_itf_count = 1; // Class will always starts with Interface Association (if any) and then Interface descriptor - if ( TUSB_DESC_INTERFACE_ASSOCIATION == tu_desc_type(p_desc) ) - { - tusb_desc_interface_assoc_t const * desc_iad = (tusb_desc_interface_assoc_t const *) p_desc; + if (TUSB_DESC_INTERFACE_ASSOCIATION == tu_desc_type(p_desc)) { + tusb_desc_interface_assoc_t const *desc_iad = (tusb_desc_interface_assoc_t const *) p_desc; assoc_itf_count = desc_iad->bInterfaceCount; - p_desc = tu_desc_next(p_desc); // next to Interface + p_desc = tu_desc_next(p_desc);// next to Interface } // must be interface from now - if( TUSB_DESC_INTERFACE != tu_desc_type(p_desc) ) return; - tusb_desc_interface_t const* desc_itf = (tusb_desc_interface_t const*) p_desc; + if (TUSB_DESC_INTERFACE != tu_desc_type(p_desc)) { return; } + tusb_desc_interface_t const *desc_itf = (tusb_desc_interface_t const *) p_desc; - uint16_t const drv_len = count_interface_total_len(desc_itf, assoc_itf_count, (uint16_t) (desc_end-p_desc)); + uint16_t const drv_len = count_interface_total_len(desc_itf, assoc_itf_count, (uint16_t) (desc_end - p_desc)); // probably corrupted descriptor - if(drv_len < sizeof(tusb_desc_interface_t)) return; + if (drv_len < sizeof(tusb_desc_interface_t)) { return; } // only open and listen to HID endpoint IN - if (desc_itf->bInterfaceClass == TUSB_CLASS_HID) - { + if (desc_itf->bInterfaceClass == TUSB_CLASS_HID) { open_hid_interface(dev_addr, desc_itf, drv_len); } @@ -210,25 +195,21 @@ void parse_config_descriptor(uint8_t dev_addr, tusb_desc_configuration_t const* } } -uint16_t count_interface_total_len(tusb_desc_interface_t const* desc_itf, uint8_t itf_count, uint16_t max_len) -{ - uint8_t const* p_desc = (uint8_t const*) desc_itf; +uint16_t count_interface_total_len(tusb_desc_interface_t const *desc_itf, uint8_t itf_count, uint16_t max_len) { + uint8_t const *p_desc = (uint8_t const *) desc_itf; uint16_t len = 0; - while (itf_count--) - { + while (itf_count--) { // Next on interface desc len += tu_desc_len(desc_itf); p_desc = tu_desc_next(p_desc); - while (len < max_len) - { + while (len < max_len) { // return on IAD regardless of itf count - if ( tu_desc_type(p_desc) == TUSB_DESC_INTERFACE_ASSOCIATION ) return len; + if (tu_desc_type(p_desc) == TUSB_DESC_INTERFACE_ASSOCIATION) { return len; } - if ( (tu_desc_type(p_desc) == TUSB_DESC_INTERFACE) && - ((tusb_desc_interface_t const*) p_desc)->bAlternateSetting == 0 ) - { + if ((tu_desc_type(p_desc) == TUSB_DESC_INTERFACE) && + ((tusb_desc_interface_t const *) p_desc)->bAlternateSetting == 0) { break; } @@ -246,46 +227,45 @@ uint16_t count_interface_total_len(tusb_desc_interface_t const* desc_itf, uint8_ void hid_report_received(tuh_xfer_t* xfer); -void open_hid_interface(uint8_t daddr, tusb_desc_interface_t const *desc_itf, uint16_t max_len) -{ +void open_hid_interface(uint8_t daddr, tusb_desc_interface_t const *desc_itf, uint16_t max_len) { // len = interface + hid + n*endpoints uint16_t const drv_len = (uint16_t) (sizeof(tusb_desc_interface_t) + sizeof(tusb_hid_descriptor_hid_t) + desc_itf->bNumEndpoints * sizeof(tusb_desc_endpoint_t)); // corrupted descriptor - if (max_len < drv_len) return; + if (max_len < drv_len) { return; } uint8_t const *p_desc = (uint8_t const *) desc_itf; // HID descriptor p_desc = tu_desc_next(p_desc); tusb_hid_descriptor_hid_t const *desc_hid = (tusb_hid_descriptor_hid_t const *) p_desc; - if(HID_DESC_TYPE_HID != desc_hid->bDescriptorType) return; + if (HID_DESC_TYPE_HID != desc_hid->bDescriptorType) { return; } // Endpoint descriptor p_desc = tu_desc_next(p_desc); - tusb_desc_endpoint_t const * desc_ep = (tusb_desc_endpoint_t const *) p_desc; - - for(int i = 0; i < desc_itf->bNumEndpoints; i++) - { - if (TUSB_DESC_ENDPOINT != desc_ep->bDescriptorType) return; - - if(tu_edpt_dir(desc_ep->bEndpointAddress) == TUSB_DIR_IN) - { - // skip if failed to open endpoint - if ( ! tuh_edpt_open(daddr, desc_ep) ) return; - - uint8_t* buf = get_hid_buf(daddr); - if (!buf) return; // out of memory - - tuh_xfer_t xfer = - { - .daddr = daddr, - .ep_addr = desc_ep->bEndpointAddress, - .buflen = 64, - .buffer = buf, - .complete_cb = hid_report_received, - .user_data = (uintptr_t) buf, // since buffer is not available in callback, use user data to store the buffer + tusb_desc_endpoint_t const *desc_ep = (tusb_desc_endpoint_t const *) p_desc; + + for (int i = 0; i < desc_itf->bNumEndpoints; i++) { + if (TUSB_DESC_ENDPOINT != desc_ep->bDescriptorType) { return; } + + if (tu_edpt_dir(desc_ep->bEndpointAddress) == TUSB_DIR_IN) { + if (!tuh_edpt_open(daddr, desc_ep)) { + return; // skip if failed to open endpoint + } + + uint8_t *buf = get_hid_buf(daddr); + if (!buf) { + return;// out of memory + } + + tuh_xfer_t xfer = { + .daddr = daddr, + .ep_addr = desc_ep->bEndpointAddress, + .buflen = 64, + .buffer = buf, + .complete_cb = hid_report_received, + .user_data = (uintptr_t) buf,// since buffer is not available in callback, use user data to store the buffer }; // submit transfer for this EP @@ -299,18 +279,17 @@ void open_hid_interface(uint8_t daddr, tusb_desc_interface_t const *desc_itf, ui } } -void hid_report_received(tuh_xfer_t* xfer) -{ +void hid_report_received(tuh_xfer_t *xfer) { // Note: not all field in xfer is available for use (i.e filled by tinyusb stack) in callback to save sram // For instance, xfer->buffer is NULL. We have used user_data to store buffer when submitted callback - uint8_t* buf = (uint8_t*) xfer->user_data; + uint8_t *buf = (uint8_t *) xfer->user_data; - if (xfer->result == XFER_RESULT_SUCCESS) - { + if (xfer->result == XFER_RESULT_SUCCESS) { printf("[dev %u: ep %02x] HID Report:", xfer->daddr, xfer->ep_addr); - for(uint32_t i=0; iactual_len; i++) - { - if (i%16 == 0) printf("\r\n "); + for (uint32_t i = 0; i < xfer->actual_len; i++) { + if (i % 16 == 0) { + printf("\r\n "); + } printf("%02X ", buf[i]); } printf("\r\n"); @@ -329,12 +308,9 @@ void hid_report_received(tuh_xfer_t* xfer) //--------------------------------------------------------------------+ // get an buffer from pool -uint8_t* get_hid_buf(uint8_t daddr) -{ - for(size_t i=0; i> 6 & 0x1F)); - *utf8++ = (uint8_t)(0x80 | (chr >> 0 & 0x3F)); - } else { - // TODO: Verify surrogate. - *utf8++ = (uint8_t)(0xE0 | (chr >> 12 & 0x0F)); - *utf8++ = (uint8_t)(0x80 | (chr >> 6 & 0x3F)); - *utf8++ = (uint8_t)(0x80 | (chr >> 0 & 0x3F)); - } - // TODO: Handle UTF-16 code points that take two entries. + // TODO: Check for runover. + (void) utf8_len; + // Get the UTF-16 length out of the data itself. + + for (size_t i = 0; i < utf16_len; i++) { + uint16_t chr = utf16[i]; + if (chr < 0x80) { + *utf8++ = chr & 0xffu; + } else if (chr < 0x800) { + *utf8++ = (uint8_t) (0xC0 | (chr >> 6 & 0x1F)); + *utf8++ = (uint8_t) (0x80 | (chr >> 0 & 0x3F)); + } else { + // TODO: Verify surrogate. + *utf8++ = (uint8_t) (0xE0 | (chr >> 12 & 0x0F)); + *utf8++ = (uint8_t) (0x80 | (chr >> 6 & 0x3F)); + *utf8++ = (uint8_t) (0x80 | (chr >> 0 & 0x3F)); } + // TODO: Handle UTF-16 code points that take two entries. + } } // Count how many bytes a utf-16-le encoded string will take in utf-8. static int _count_utf8_bytes(const uint16_t *buf, size_t len) { - size_t total_bytes = 0; - for (size_t i = 0; i < len; i++) { - uint16_t chr = buf[i]; - if (chr < 0x80) { - total_bytes += 1; - } else if (chr < 0x800) { - total_bytes += 2; - } else { - total_bytes += 3; - } - // TODO: Handle UTF-16 code points that take two entries. + size_t total_bytes = 0; + for (size_t i = 0; i < len; i++) { + uint16_t chr = buf[i]; + if (chr < 0x80) { + total_bytes += 1; + } else if (chr < 0x800) { + total_bytes += 2; + } else { + total_bytes += 3; } - return (int) total_bytes; + // TODO: Handle UTF-16 code points that take two entries. + } + return (int) total_bytes; } static void print_utf16(uint16_t *temp_buf, size_t buf_len) { - if ((temp_buf[0] & 0xff) == 0) return; // empty - size_t utf16_len = ((temp_buf[0] & 0xff) - 2) / sizeof(uint16_t); - size_t utf8_len = (size_t) _count_utf8_bytes(temp_buf + 1, utf16_len); - _convert_utf16le_to_utf8(temp_buf + 1, utf16_len, (uint8_t *) temp_buf, sizeof(uint16_t) * buf_len); - ((uint8_t*) temp_buf)[utf8_len] = '\0'; + if ((temp_buf[0] & 0xff) == 0) return;// empty + size_t utf16_len = ((temp_buf[0] & 0xff) - 2) / sizeof(uint16_t); + size_t utf8_len = (size_t) _count_utf8_bytes(temp_buf + 1, utf16_len); + _convert_utf16le_to_utf8(temp_buf + 1, utf16_len, (uint8_t *) temp_buf, sizeof(uint16_t) * buf_len); + ((uint8_t *) temp_buf)[utf8_len] = '\0'; - printf("%s", (char*)temp_buf); + printf("%s", (char *) temp_buf); } diff --git a/src/host/hcd.h b/src/host/hcd.h index 56b6fdb5d..aa9e9cf3b 100644 --- a/src/host/hcd.h +++ b/src/host/hcd.h @@ -165,6 +165,9 @@ void hcd_device_close(uint8_t rhport, uint8_t dev_addr); // Open an endpoint bool hcd_edpt_open(uint8_t rhport, uint8_t daddr, tusb_desc_endpoint_t const * ep_desc); +// Close an endpoint +bool hcd_edpt_close(uint8_t rhport, uint8_t daddr, uint8_t ep_addr); + // Submit a transfer, when complete hcd_event_xfer_complete() must be invoked bool hcd_edpt_xfer(uint8_t rhport, uint8_t daddr, uint8_t ep_addr, uint8_t * buffer, uint16_t buflen); diff --git a/src/host/usbh.c b/src/host/usbh.c index 308916c9b..5925a7be0 100644 --- a/src/host/usbh.c +++ b/src/host/usbh.c @@ -994,6 +994,12 @@ bool tuh_edpt_open(uint8_t dev_addr, tusb_desc_endpoint_t const* desc_ep) { return hcd_edpt_open(usbh_get_rhport(dev_addr), dev_addr, desc_ep); } +bool tuh_edpt_close(uint8_t daddr, uint8_t ep_addr) { + TU_VERIFY(0 != tu_edpt_number(ep_addr)); // cannot close EP0 + tuh_edpt_abort_xfer(daddr, ep_addr); // abort any pending transfer + return hcd_edpt_close(usbh_get_rhport(daddr), daddr, ep_addr); +} + bool usbh_edpt_busy(uint8_t dev_addr, uint8_t ep_addr) { usbh_device_t* dev = get_device(dev_addr); TU_VERIFY(dev); diff --git a/src/host/usbh.h b/src/host/usbh.h index d95bb9b57..4829a8183 100644 --- a/src/host/usbh.h +++ b/src/host/usbh.h @@ -33,6 +33,10 @@ #include "common/tusb_common.h" +#if CFG_TUH_MAX3421 +#include "portable/analog/max3421/hcd_max3421.h" +#endif + //--------------------------------------------------------------------+ // MACRO CONSTANT TYPEDEF //--------------------------------------------------------------------+ @@ -227,6 +231,9 @@ bool tuh_edpt_xfer(tuh_xfer_t* xfer); // Open a non-control endpoint bool tuh_edpt_open(uint8_t daddr, tusb_desc_endpoint_t const * desc_ep); +// Close a non-control endpoint, it will abort any pending transfer +bool tuh_edpt_close(uint8_t daddr, uint8_t ep_addr); + // Abort a queued transfer. Note: it can only abort transfer that has not been started // Return true if a queued transfer is aborted, false if there is no transfer to abort bool tuh_edpt_abort_xfer(uint8_t daddr, uint8_t ep_addr); diff --git a/src/portable/analog/max3421/hcd_max3421.c b/src/portable/analog/max3421/hcd_max3421.c index c5e924266..3fbf950a4 100644 --- a/src/portable/analog/max3421/hcd_max3421.c +++ b/src/portable/analog/max3421/hcd_max3421.c @@ -252,28 +252,6 @@ static tuh_configure_max3421_t _tuh_cfg = { .pinctl = 0, // default: negative edge interrupt }; -//--------------------------------------------------------------------+ -// API: SPI transfer with MAX3421E -// - spi_cs_api(), spi_xfer_api(), int_api(): must be implemented by application -// - reg_read(), reg_write(): is implemented by this driver, can be used by application -//--------------------------------------------------------------------+ - -// API to control MAX3421 SPI CS -extern void tuh_max3421_spi_cs_api(uint8_t rhport, bool active); - -// API to transfer data with MAX3421 SPI -// Either tx_buf or rx_buf can be NULL, which means transfer is write or read only -extern bool tuh_max3421_spi_xfer_api(uint8_t rhport, uint8_t const* tx_buf, uint8_t* rx_buf, size_t xfer_bytes); - -// API to enable/disable MAX3421 INTR pin interrupt -extern void tuh_max3421_int_api(uint8_t rhport, bool enabled); - -// API to read MAX3421's register. Implemented by TinyUSB -uint8_t tuh_max3421_reg_read(uint8_t rhport, uint8_t reg, bool in_isr); - -// API to write MAX3421's register. Implemented by TinyUSB -bool tuh_max3421_reg_write(uint8_t rhport, uint8_t reg, uint8_t data, bool in_isr); - //--------------------------------------------------------------------+ // SPI Commands and Helper //--------------------------------------------------------------------+ @@ -632,6 +610,9 @@ bool hcd_edpt_open(uint8_t rhport, uint8_t daddr, tusb_desc_endpoint_t const * e if (daddr == 0 && ep_num == 0) { ep = &_hcd_data.ep[0]; }else { + if (NULL != find_ep_not_addr0(daddr, ep_num, ep_dir)) { + return false; // endpoint already opened + } ep = allocate_ep(); TU_ASSERT(ep); ep->daddr = daddr; @@ -645,6 +626,21 @@ bool hcd_edpt_open(uint8_t rhport, uint8_t daddr, tusb_desc_endpoint_t const * e return true; } +bool hcd_edpt_close(uint8_t rhport, uint8_t daddr, uint8_t ep_addr) { + (void) rhport; + uint8_t const ep_num = tu_edpt_number(ep_addr); + tusb_dir_t const ep_dir = tu_edpt_dir(ep_addr); + max3421_ep_t * ep = find_ep_not_addr0(daddr, ep_num, ep_dir); + + if (!ep) { + return false; // not opened + } + + tu_memclr(ep, sizeof(max3421_ep_t)); + + return true; +} + /* The microcontroller repeatedly writes the SNDFIFO register R2 to load the FIFO with up to 64 data bytes. * Then the microcontroller writes the SNDBC register, which this does three things: * 1. Tells the MAX3421E SIE (Serial Interface Engine) how many bytes in the FIFO to send. diff --git a/src/portable/analog/max3421/hcd_max3421.h b/src/portable/analog/max3421/hcd_max3421.h new file mode 100644 index 000000000..4631fa21a --- /dev/null +++ b/src/portable/analog/max3421/hcd_max3421.h @@ -0,0 +1,63 @@ +/* + * The MIT License (MIT) + * + * Copyright (c) 2025 Ha Thach (tinyusb.org) + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + * This file is part of the TinyUSB stack. + */ +#ifndef TUSB_HCD_MAX3421_H +#define TUSB_HCD_MAX3421_H + +#ifdef __cplusplus + extern "C" { +#endif + +//--------------------------------------------------------------------+ +// SPI transfer API with MAX3421E are implemented by application +// - spi_cs_api(), spi_xfer_api(), int_api() +//--------------------------------------------------------------------+ + +// API to control MAX3421 SPI CS +extern void tuh_max3421_spi_cs_api(uint8_t rhport, bool active); + +// API to transfer data with MAX3421 SPI +// Either tx_buf or rx_buf can be NULL, which means transfer is write or read only +extern bool tuh_max3421_spi_xfer_api(uint8_t rhport, uint8_t const* tx_buf, uint8_t* rx_buf, size_t xfer_bytes); + +// API to enable/disable MAX3421 INTR pin interrupt +extern void tuh_max3421_int_api(uint8_t rhport, bool enabled); + +//--------------------------------------------------------------------+ +// API for read/write MAX3421 registers +// are implemented by this driver, can be used by application +//--------------------------------------------------------------------+ + +// API to read MAX3421's register. Implemented by TinyUSB +uint8_t tuh_max3421_reg_read(uint8_t rhport, uint8_t reg, bool in_isr); + +// API to write MAX3421's register. Implemented by TinyUSB +bool tuh_max3421_reg_write(uint8_t rhport, uint8_t reg, uint8_t data, bool in_isr); + +#ifdef __cplusplus + } +#endif + +#endif diff --git a/src/portable/raspberrypi/pio_usb/hcd_pio_usb.c b/src/portable/raspberrypi/pio_usb/hcd_pio_usb.c index 6422afff1..225a44dcf 100644 --- a/src/portable/raspberrypi/pio_usb/hcd_pio_usb.c +++ b/src/portable/raspberrypi/pio_usb/hcd_pio_usb.c @@ -122,6 +122,11 @@ bool hcd_edpt_open(uint8_t rhport, uint8_t dev_addr, tusb_desc_endpoint_t const return pio_usb_host_endpoint_open(pio_rhport, dev_addr, (uint8_t const *) desc_ep, need_pre); } +bool hcd_edpt_close(uint8_t rhport, uint8_t daddr, uint8_t ep_addr) { + uint8_t const pio_rhport = RHPORT_PIO(rhport); + return pio_usb_host_endpoint_close(pio_rhport, daddr, ep_addr); +} + bool hcd_edpt_xfer(uint8_t rhport, uint8_t dev_addr, uint8_t ep_addr, uint8_t *buffer, uint16_t buflen) { uint8_t const pio_rhport = RHPORT_PIO(rhport); return pio_usb_host_endpoint_transfer(pio_rhport, dev_addr, ep_addr, buffer, buflen); diff --git a/tools/get_deps.py b/tools/get_deps.py index 3f529bd7e..ba9dc23ce 100755 --- a/tools/get_deps.py +++ b/tools/get_deps.py @@ -58,8 +58,8 @@ deps_optional = { 'hw/mcu/nxp/mcux-sdk': ['https://github.com/hathach/mcux-sdk.git', '144f1eb7ea8c06512e12f12b27383601c0272410', 'kinetis_k kinetis_k32l2 kinetis_kl lpc51 lpc54 lpc55 mcx imxrt'], - 'hw/mcu/raspberry_pi/Pico-PIO-USB': ['https://github.com/sekigon-gonnoc/Pico-PIO-USB.git', - '0ca3657d55ea20e7fa4483bbd21ce951bc1d6fa5', + 'hw/mcu/raspberry_pi/Pico-PIO-USB': ['https://github.com/hathach/Pico-PIO-USB.git', + '810653f66adadba3e0e4b4b56d5167ac4f7fdbf7', 'rp2040'], 'hw/mcu/renesas/fsp': ['https://github.com/renesas/fsp.git', 'edcc97d684b6f716728a60d7a6fea049d9870bd6', -- cgit v1.3.1 From 3851c7c97a2a743b63d879ab622dd267b4195f08 Mon Sep 17 00:00:00 2001 From: hathach Date: Thu, 17 Apr 2025 16:07:10 +0700 Subject: - run arm-iar using github action - add skip_ci.txt to family folder to skip boards in ci run --- .github/workflows/build.yml | 62 ++++++++++++++++++----------- .github/workflows/build_util.yml | 2 + hw/bsp/rp2040/skip_ci.txt | 7 ++++ hw/bsp/stm32h7/boards/stm32h743eval/board.h | 10 ++--- hw/bsp/stm32h7/family.c | 4 +- tools/build.py | 7 +++- 6 files changed, 61 insertions(+), 31 deletions(-) create mode 100644 hw/bsp/rp2040/skip_ci.txt (limited to 'tools') diff --git a/.github/workflows/build.yml b/.github/workflows/build.yml index f42499ef7..6419efbe8 100644 --- a/.github/workflows/build.yml +++ b/.github/workflows/build.yml @@ -110,35 +110,51 @@ jobs: one-per-family: true # --------------------------------------- - # Build IAR on HFP self-hosted + # Build IAR # Since IAR Token secret is not passed to forked PR, only build on PR from the same repo # --------------------------------------- arm-iar: if: github.repository_owner == 'hathach' && github.event_name == 'push' needs: set-matrix - runs-on: [self-hosted, Linux, X64, hifiphile] - env: - BUILD_ARGS: ${{ join(fromJSON(needs.set-matrix.outputs.json)['arm-iar'], ' ') }} - IAR_LMS_BEARER_TOKEN: ${{ secrets.IAR_LMS_BEARER_TOKEN }} - steps: - - name: Clean workspace - run: | - echo "Cleaning up previous run" - rm -rf "${{ github.workspace }}" - mkdir -p "${{ github.workspace }}" - - - name: Toolchain version - run: | - iccarm --version - - - name: Checkout TinyUSB - uses: actions/checkout@v4 - - - name: Get Dependencies - run: python3 tools/get_deps.py $BUILD_ARGS + uses: ./.github/workflows/build_util.yml + secrets: inherit + strategy: + fail-fast: false + matrix: + build-system: + - 'cmake' + with: + build-system: ${{ matrix.build-system }} + toolchain: 'arm-iar' + build-args: ${{ toJSON(fromJSON(needs.set-matrix.outputs.json)['arm-iar']) }} + one-per-family: ${{ github.event_name == 'push' }} - - name: Build - run: python3 tools/build.py --one-per-family --toolchain iar $BUILD_ARGS +# arm-iar: +# if: github.repository_owner == 'hathach' && github.event_name == 'push' +# needs: set-matrix +# runs-on: [self-hosted, Linux, X64, hifiphile] +# env: +# BUILD_ARGS: ${{ join(fromJSON(needs.set-matrix.outputs.json)['arm-iar'], ' ') }} +# IAR_LMS_BEARER_TOKEN: ${{ secrets.IAR_LMS_BEARER_TOKEN }} +# steps: +# - name: Clean workspace +# run: | +# echo "Cleaning up previous run" +# rm -rf "${{ github.workspace }}" +# mkdir -p "${{ github.workspace }}" +# +# - name: Toolchain version +# run: | +# iccarm --version +# +# - name: Checkout TinyUSB +# uses: actions/checkout@v4 +# +# - name: Get Dependencies +# run: python3 tools/get_deps.py $BUILD_ARGS +# +# - name: Build +# run: python3 tools/build.py --one-per-family --toolchain iar $BUILD_ARGS # --------------------------------------- # Zephyr diff --git a/.github/workflows/build_util.yml b/.github/workflows/build_util.yml index 2de68c6f3..a2c96f3c0 100644 --- a/.github/workflows/build_util.yml +++ b/.github/workflows/build_util.yml @@ -58,6 +58,8 @@ jobs: shell: bash - name: Build + env: + IAR_LMS_BEARER_TOKEN: ${{ secrets.IAR_LMS_BEARER_TOKEN }} run: | if [ "${{ inputs.toolchain }}" == "esp-idf" ]; then docker run --rm -v $PWD:/project -w /project espressif/idf:tinyusb python tools/build.py ${{ matrix.arg }} diff --git a/hw/bsp/rp2040/skip_ci.txt b/hw/bsp/rp2040/skip_ci.txt new file mode 100644 index 000000000..fe99c9f65 --- /dev/null +++ b/hw/bsp/rp2040/skip_ci.txt @@ -0,0 +1,7 @@ +# boards in this files are skipped when running CI with this family +adafruit_feather_rp2040_usb_host +adafruit_fruit_jam +adafruit_metro_rp2350 +feather_rp2040_max3421 +pico_sdk +raspberry_pi_pico_w diff --git a/hw/bsp/stm32h7/boards/stm32h743eval/board.h b/hw/bsp/stm32h7/boards/stm32h743eval/board.h index 334876e51..cb6d772e6 100644 --- a/hw/bsp/stm32h7/boards/stm32h743eval/board.h +++ b/hw/bsp/stm32h7/boards/stm32h743eval/board.h @@ -184,7 +184,7 @@ static MFXSTM32L152_Object_t mfx_obj = { 0 }; static MFXSTM32L152_IO_Mode_t* mfx_io = NULL; static uint32_t mfx_vbus_pin[2] = { MFXSTM32L152_GPIO_PIN_7, MFXSTM32L152_GPIO_PIN_9 }; -int32_t board_i2c_init(void) { +static int32_t board_i2c_init(void) { __HAL_RCC_I2C1_CLK_ENABLE(); __HAL_RCC_I2C1_FORCE_RESET(); __HAL_RCC_I2C1_RELEASE_RESET(); @@ -200,16 +200,16 @@ int32_t board_i2c_init(void) { return 0; } -int32_t board_i2c_deinit(void) { +static int32_t board_i2c_deinit(void) { return 0; } -int32_t i2c_readreg(uint16_t DevAddr, uint16_t Reg, uint8_t *pData, uint16_t Length) { +static int32_t i2c_readreg(uint16_t DevAddr, uint16_t Reg, uint8_t *pData, uint16_t Length) { TU_ASSERT (HAL_OK == HAL_I2C_Mem_Read(&i2c_handle, DevAddr, Reg, I2C_MEMADD_SIZE_8BIT, pData, Length, 10000)); return 0; } -int32_t i2c_writereg(uint16_t DevAddr, uint16_t Reg, uint8_t *pData, uint16_t Length) { +static int32_t i2c_writereg(uint16_t DevAddr, uint16_t Reg, uint8_t *pData, uint16_t Length) { TU_ASSERT(HAL_OK == HAL_I2C_Mem_Write(&i2c_handle, DevAddr, Reg, I2C_MEMADD_SIZE_8BIT, pData, Length, 10000)); return 0; } @@ -249,7 +249,7 @@ static inline void board_init2(void) { } // VBUS1 is actually controlled by USB3320C PHY (using dwc2 drivebus signal) -void board_vbus_set(uint8_t rhport, bool state) { +static void board_vbus_set(uint8_t rhport, bool state) { if (mfx_io) { mfx_io->IO_WritePin(&mfx_obj, mfx_vbus_pin[rhport], state); } diff --git a/hw/bsp/stm32h7/family.c b/hw/bsp/stm32h7/family.c index e5228b29b..f8723b0c7 100644 --- a/hw/bsp/stm32h7/family.c +++ b/hw/bsp/stm32h7/family.c @@ -80,7 +80,7 @@ void OTG_HS_IRQHandler(void) { } #ifdef TRACE_ETM -void trace_etm_init(void) { +static void trace_etm_init(void) { // H7 trace pin is PE2 to PE6 GPIO_InitTypeDef gpio_init; gpio_init.Pin = GPIO_PIN_2 | GPIO_PIN_3 | GPIO_PIN_4 | GPIO_PIN_5 | GPIO_PIN_6; @@ -94,7 +94,7 @@ void trace_etm_init(void) { DBGMCU->CR |= DBGMCU_CR_DBG_TRACECKEN | DBGMCU_CR_DBG_CKD1EN | DBGMCU_CR_DBG_CKD3EN; } #else - #define trace_etm_init() +#define trace_etm_init() #endif void board_init(void) { diff --git a/tools/build.py b/tools/build.py index 633d2b582..d28ddd929 100755 --- a/tools/build.py +++ b/tools/build.py @@ -182,9 +182,14 @@ def build_boards_list(boards, toolchain, build_system, build_flags_on): def build_family(family, toolchain, build_system, build_flags_on, one_per_family, boards): + skip_ci = ['pico_sdk'] + if os.getenv('GITHUB_ACTIONS') or os.getenv('CIRCLECI'): + skip_ci_file = Path(f"hw/bsp/{family}/skip_ci.txt") + if skip_ci_file.exists(): + skip_ci = skip_ci_file.read_text().split() all_boards = [] for entry in os.scandir(f"hw/bsp/{family}/boards"): - if entry.is_dir() and entry.name != 'pico_sdk': + if entry.is_dir() and not entry.name in skip_ci: all_boards.append(entry.name) all_boards.sort() -- cgit v1.3.1 From 0937a2b2d3dbc0b5595c6ea3a6acc8a691f73941 Mon Sep 17 00:00:00 2001 From: Eli Hughes Date: Sat, 26 Apr 2025 13:04:39 -0400 Subject: using get-deps from tinyuf2 --- tools/get_deps.py | 10 ++++++---- 1 file changed, 6 insertions(+), 4 deletions(-) (limited to 'tools') diff --git a/tools/get_deps.py b/tools/get_deps.py index ba9dc23ce..d89c1b2b1 100755 --- a/tools/get_deps.py +++ b/tools/get_deps.py @@ -243,11 +243,13 @@ def get_a_dep(d): p.mkdir(parents=True) run_cmd(f"{git_cmd} init") run_cmd(f"{git_cmd} remote add origin {url}") + head = None + else: + # Check if commit is already fetched + result = run_cmd(f"{git_cmd} rev-parse HEAD") + head = result.stdout.decode("utf-8").splitlines()[0] + run_cmd(f"{git_cmd} reset --hard") - # Check if commit is already fetched - result = run_cmd(f"{git_cmd} rev-parse HEAD") - head = result.stdout.decode("utf-8").splitlines()[0] - run_cmd(f"{git_cmd} reset --hard") if commit != head: run_cmd(f"{git_cmd} fetch --depth 1 origin {commit}") run_cmd(f"{git_cmd} checkout FETCH_HEAD") -- cgit v1.3.1 From f392b4c91d725a02010cea46f94af3cb948b5136 Mon Sep 17 00:00:00 2001 From: Eli Hughes Date: Wed, 1 Jan 2025 13:22:48 -0500 Subject: Added initial support for FRDM-MCXA156 and fixed up a crash with MCXN947 I will be porting tinyuf2 to MCXA156 and N947 and need this work in place. This is the 1st step before bringing in support for other MCX devices. We had previous patched https://github.com/hathach/mcux-sdk.git' for MCX support as it was not pulically available I updated get_deps to point to the mcux-sdk version 2.16.10 from NXP. I repointed the entry in the get_deps script to use NXP MCU repo. The existing current code couldn't build as the MCUXpresso SDK was old. - For now, I put a copy of fsl_spc.c in the drivers folder for the mcx family. None of the ports could build with the version in the mcux github sdk. The sdk on github has version 2.4.0. The SDK package that can be downloaded with the SDK generator uses 2.4.2. All of the clock_config routines use versions of the datastructure from 2.4.2. For now, keeping an updated copy in hw/bsp/mcx/drivers so we can build against the latest mcuxpresso sdk and enable MCXA156. I'll file an issue on the nxp github. - Cleaned up the MCX family.c a little bit. the MCXA/N these chips don't have SCT so I removed the neopixel code. - fixed a clock init issue w/ N947 that was causing it to crash when initializing the uart. - I tested the cmake and make scripts on the A153,A156 and N947 using the CDC/MSC sample. All worked OK. - Patched get_deps so it will do a fetch/check on a new folder. Some of the deps were failing on a fresh clone of tinyusb - Fixed lpc51,54 and lpc55 make/cmake files to build with mcuxpresso sdk 2.16.10 The folder structure for flexcomm/uart changed a little bit - lpc55s59 libpower_hardabi.a no longer is included in mcuxpressosdk, (fsl_power.c is replacement). remove of libpower_hardabi.a from the linker config. LPC55 still works as expected. - Using tinyuf2 get deps --- README.rst | 4 +- hw/bsp/lpc51/family.cmake | 2 +- hw/bsp/lpc51/family.mk | 9 +- hw/bsp/lpc54/family.cmake | 3 +- hw/bsp/lpc54/family.mk | 3 +- hw/bsp/lpc55/family.cmake | 4 +- hw/bsp/lpc55/family.mk | 7 +- hw/bsp/mcx/boards/frdm_mcxa153/board.h | 4 +- hw/bsp/mcx/boards/frdm_mcxa153/clock_config.c | 4 +- hw/bsp/mcx/boards/frdm_mcxa153/clock_config.h | 2 +- hw/bsp/mcx/boards/frdm_mcxa153/pin_mux.c | 53 +- hw/bsp/mcx/boards/frdm_mcxa153/pin_mux.h | 6 +- hw/bsp/mcx/boards/frdm_mcxa156/board.cmake | 21 + hw/bsp/mcx/boards/frdm_mcxa156/board.h | 69 + hw/bsp/mcx/boards/frdm_mcxa156/board.mk | 14 + hw/bsp/mcx/boards/frdm_mcxa156/clock_config.c | 482 +++++ hw/bsp/mcx/boards/frdm_mcxa156/clock_config.h | 170 ++ hw/bsp/mcx/boards/frdm_mcxa156/pin_mux.c | 144 ++ hw/bsp/mcx/boards/frdm_mcxa156/pin_mux.h | 51 + hw/bsp/mcx/boards/frdm_mcxn947/board.h | 13 +- hw/bsp/mcx/drivers/spc/fsl_spc.c | 1680 +++++++++++++++++ hw/bsp/mcx/drivers/spc/fsl_spc.h | 2433 +++++++++++++++++++++++++ hw/bsp/mcx/family.c | 30 +- hw/bsp/mcx/family.cmake | 28 +- hw/bsp/mcx/family.mk | 21 +- tools/get_deps.py | 14 +- 26 files changed, 5165 insertions(+), 106 deletions(-) create mode 100644 hw/bsp/mcx/boards/frdm_mcxa156/board.cmake create mode 100644 hw/bsp/mcx/boards/frdm_mcxa156/board.h create mode 100644 hw/bsp/mcx/boards/frdm_mcxa156/board.mk create mode 100644 hw/bsp/mcx/boards/frdm_mcxa156/clock_config.c create mode 100644 hw/bsp/mcx/boards/frdm_mcxa156/clock_config.h create mode 100644 hw/bsp/mcx/boards/frdm_mcxa156/pin_mux.c create mode 100644 hw/bsp/mcx/boards/frdm_mcxa156/pin_mux.h create mode 100644 hw/bsp/mcx/drivers/spc/fsl_spc.c create mode 100644 hw/bsp/mcx/drivers/spc/fsl_spc.h (limited to 'tools') diff --git a/README.rst b/README.rst index efbfa354b..0d6b147d9 100644 --- a/README.rst +++ b/README.rst @@ -167,7 +167,9 @@ Supported CPUs | | +-------------------+--------+------+-----------+------------------------+-------------------+ | | | 54, 55 | ✔ | | ✔ | lpc_ip3511 | | | +---------+-------------------+--------+------+-----------+------------------------+-------------------+ -| | MCX | N9, A15 | ✔ | | ✔ | ci_fs, ci_hs | | +| | MCX | N9 | ✔ | | ✔ | ci_fs, ci_hs | | +| | +-------------------+--------+------+-----------+------------------------+-------------------+ +| | | A15 | ✔ | | | ci_fs | | +--------------+---------+-------------------+--------+------+-----------+------------------------+-------------------+ | Raspberry Pi | RP2040, RP2350 | ✔ | ✔ | ✖ | rp2040, pio_usb | | +--------------+-----+-----------------------+--------+------+-----------+------------------------+-------------------+ diff --git a/hw/bsp/lpc51/family.cmake b/hw/bsp/lpc51/family.cmake index 2146c29f7..09d97d256 100644 --- a/hw/bsp/lpc51/family.cmake +++ b/hw/bsp/lpc51/family.cmake @@ -36,7 +36,7 @@ function(add_board_target BOARD_TARGET) # driver ${SDK_DIR}/drivers/lpc_gpio/fsl_gpio.c ${SDK_DIR}/drivers/flexcomm/fsl_flexcomm.c - ${SDK_DIR}/drivers/flexcomm/fsl_usart.c + ${SDK_DIR}/drivers/flexcomm/usart/fsl_usart.c # mcu ${SDK_DIR}/devices/${MCU_VARIANT}/system_${MCU_VARIANT}.c ${SDK_DIR}/devices/${MCU_VARIANT}/drivers/fsl_clock.c diff --git a/hw/bsp/lpc51/family.mk b/hw/bsp/lpc51/family.mk index b41b5438e..f37360a71 100644 --- a/hw/bsp/lpc51/family.mk +++ b/hw/bsp/lpc51/family.mk @@ -28,18 +28,19 @@ SRC_C += \ $(MCU_DIR)/drivers/fsl_reset.c \ $(SDK_DIR)/drivers/lpc_gpio/fsl_gpio.c \ $(SDK_DIR)/drivers/flexcomm/fsl_flexcomm.c \ - $(SDK_DIR)/drivers/flexcomm/fsl_usart.c + $(SDK_DIR)/drivers/flexcomm/usart/fsl_usart.c INC += \ - $(TOP)/$(BOARD_PATH) \ - $(TOP)/lib/CMSIS_5/CMSIS/Core/Include \ + $(TOP)/$(BOARD_PATH) \ + $(TOP)/lib/CMSIS_5/CMSIS/Core/Include \ $(TOP)/$(MCU_DIR) \ $(TOP)/$(MCU_DIR)/drivers \ $(TOP)/$(SDK_DIR)/drivers/common \ $(TOP)/$(SDK_DIR)/drivers/flexcomm \ + $(TOP)/$(SDK_DIR)/drivers/flexcomm/usart \ $(TOP)/$(SDK_DIR)/drivers/lpc_iocon \ $(TOP)/$(SDK_DIR)/drivers/lpc_gpio - + SRC_S += $(MCU_DIR)/gcc/startup_$(MCU).S LIBS += $(TOP)/$(MCU_DIR)/gcc/libpower.a diff --git a/hw/bsp/lpc54/family.cmake b/hw/bsp/lpc54/family.cmake index 90497b9fb..66320870a 100644 --- a/hw/bsp/lpc54/family.cmake +++ b/hw/bsp/lpc54/family.cmake @@ -44,7 +44,7 @@ function(add_board_target BOARD_TARGET) ${SDK_DIR}/drivers/lpc_gpio/fsl_gpio.c ${SDK_DIR}/drivers/common/fsl_common_arm.c ${SDK_DIR}/drivers/flexcomm/fsl_flexcomm.c - ${SDK_DIR}/drivers/flexcomm/fsl_usart.c + ${SDK_DIR}/drivers/flexcomm/usart/fsl_usart.c # mcu ${SDK_DIR}/devices/${MCU_VARIANT}/system_${MCU_CORE}.c ${SDK_DIR}/devices/${MCU_VARIANT}/drivers/fsl_clock.c @@ -56,6 +56,7 @@ function(add_board_target BOARD_TARGET) # driver ${SDK_DIR}/drivers/common ${SDK_DIR}/drivers/flexcomm + ${SDK_DIR}/drivers/flexcomm/usart ${SDK_DIR}/drivers/lpc_iocon ${SDK_DIR}/drivers/lpc_gpio ${SDK_DIR}/drivers/lpuart diff --git a/hw/bsp/lpc54/family.mk b/hw/bsp/lpc54/family.mk index ea4c9c39c..8dc70f621 100644 --- a/hw/bsp/lpc54/family.mk +++ b/hw/bsp/lpc54/family.mk @@ -36,7 +36,7 @@ SRC_C += \ $(MCU_DIR)/drivers/fsl_reset.c \ $(SDK_DIR)/drivers/lpc_gpio/fsl_gpio.c \ $(SDK_DIR)/drivers/flexcomm/fsl_flexcomm.c \ - $(SDK_DIR)/drivers/flexcomm/fsl_usart.c \ + $(SDK_DIR)/drivers/flexcomm/usart/fsl_usart.c \ $(SDK_DIR)/drivers/common/fsl_common_arm.c INC += \ @@ -46,6 +46,7 @@ INC += \ $(TOP)/$(MCU_DIR)/drivers \ $(TOP)/$(SDK_DIR)/drivers/common \ $(TOP)/$(SDK_DIR)/drivers/flexcomm \ + $(TOP)/$(SDK_DIR)/drivers/flexcomm/usart \ $(TOP)/$(SDK_DIR)/drivers/lpc_iocon \ $(TOP)/$(SDK_DIR)/drivers/lpc_gpio diff --git a/hw/bsp/lpc55/family.cmake b/hw/bsp/lpc55/family.cmake index cd1eb5f78..a89548635 100644 --- a/hw/bsp/lpc55/family.cmake +++ b/hw/bsp/lpc55/family.cmake @@ -44,7 +44,7 @@ function(add_board_target BOARD_TARGET) ${SDK_DIR}/drivers/lpc_gpio/fsl_gpio.c ${SDK_DIR}/drivers/common/fsl_common_arm.c ${SDK_DIR}/drivers/flexcomm/fsl_flexcomm.c - ${SDK_DIR}/drivers/flexcomm/fsl_usart.c + ${SDK_DIR}/drivers/flexcomm/usart/fsl_usart.c # mcu ${SDK_DIR}/devices/${MCU_VARIANT}/system_${MCU_CORE}.c ${SDK_DIR}/devices/${MCU_VARIANT}/drivers/fsl_clock.c @@ -56,9 +56,9 @@ function(add_board_target BOARD_TARGET) # driver ${SDK_DIR}/drivers/common ${SDK_DIR}/drivers/flexcomm + ${SDK_DIR}/drivers/flexcomm/usart ${SDK_DIR}/drivers/lpc_iocon ${SDK_DIR}/drivers/lpc_gpio - ${SDK_DIR}/drivers/lpuart ${SDK_DIR}/drivers/sctimer # mcu ${SDK_DIR}/devices/${MCU_VARIANT} diff --git a/hw/bsp/lpc55/family.mk b/hw/bsp/lpc55/family.mk index d82e85904..85b9a2cc9 100644 --- a/hw/bsp/lpc55/family.mk +++ b/hw/bsp/lpc55/family.mk @@ -45,7 +45,7 @@ SRC_C += \ $(SDK_DIR)/drivers/lpc_gpio/fsl_gpio.c \ $(SDK_DIR)/drivers/common/fsl_common_arm.c \ $(SDK_DIR)/drivers/flexcomm/fsl_flexcomm.c \ - $(SDK_DIR)/drivers/flexcomm/fsl_usart.c \ + $(SDK_DIR)/drivers/flexcomm/usart/fsl_usart.c \ lib/sct_neopixel/sct_neopixel.c INC += \ @@ -55,11 +55,12 @@ INC += \ $(TOP)/$(MCU_DIR) \ $(TOP)/$(MCU_DIR)/drivers \ $(TOP)/$(SDK_DIR)/drivers/common \ - $(TOP)/$(SDK_DIR)/drivers/flexcomm \ + $(TOP)/$(SDK_DIR)/drivers/flexcomm/usart \ + $(TOP)/$(SDK_DIR)/drivers/flexcomm/ \ $(TOP)/$(SDK_DIR)/drivers/lpc_iocon \ $(TOP)/$(SDK_DIR)/drivers/lpc_gpio \ $(TOP)/$(SDK_DIR)/drivers/sctimer SRC_S += $(MCU_DIR)/gcc/startup_$(MCU_CORE).S -LIBS += $(TOP)/$(MCU_DIR)/gcc/libpower_hardabi.a + diff --git a/hw/bsp/mcx/boards/frdm_mcxa153/board.h b/hw/bsp/mcx/boards/frdm_mcxa153/board.h index fb1290088..86f987de9 100644 --- a/hw/bsp/mcx/boards/frdm_mcxa153/board.h +++ b/hw/bsp/mcx/boards/frdm_mcxa153/board.h @@ -39,10 +39,10 @@ extern "C" { // LED #define LED_GPIO GPIO3 #define LED_CLK kCLOCK_GateGPIO3 -#define LED_PIN 12 // red +#define LED_PIN 12 //red #define LED_STATE_ON 0 -// ISP button (Dummy, use unused pin +// ISP button #define BUTTON_GPIO GPIO3 #define BUTTON_CLK kCLOCK_GateGPIO3 #define BUTTON_PIN 29 //sw2 diff --git a/hw/bsp/mcx/boards/frdm_mcxa153/clock_config.c b/hw/bsp/mcx/boards/frdm_mcxa153/clock_config.c index f16bc51f6..5a132dc67 100644 --- a/hw/bsp/mcx/boards/frdm_mcxa153/clock_config.c +++ b/hw/bsp/mcx/boards/frdm_mcxa153/clock_config.c @@ -45,14 +45,13 @@ processor_version: 0.13.0 * Variables ******************************************************************************/ /* System clock frequency. */ -//uint32_t SystemCoreClock; +//extern uint32_t SystemCoreClock; /******************************************************************************* ************************ BOARD_InitBootClocks function ************************ ******************************************************************************/ void BOARD_InitBootClocks(void) { - BOARD_BootClockFRO96M(); } /******************************************************************************* @@ -386,7 +385,6 @@ void BOARD_BootClockFRO64M(void) /* TEXT BELOW IS USED AS SETTING FOR TOOLS ************************************* !!Configuration name: BOARD_BootClockFRO96M -called_from_default_init: true outputs: - {id: CLK_1M_clock.outFreq, value: 1 MHz} - {id: CLK_48M_clock.outFreq, value: 48 MHz} diff --git a/hw/bsp/mcx/boards/frdm_mcxa153/clock_config.h b/hw/bsp/mcx/boards/frdm_mcxa153/clock_config.h index aae811052..079d0d312 100644 --- a/hw/bsp/mcx/boards/frdm_mcxa153/clock_config.h +++ b/hw/bsp/mcx/boards/frdm_mcxa153/clock_config.h @@ -4,7 +4,7 @@ * * SPDX-License-Identifier: BSD-3-Clause */ - + /*********************************************************************************************************************** * This file was generated by the MCUXpresso Config Tools. Any manual edits made to this file * will be overwritten if the respective MCUXpresso Config Tools is used to update this file. diff --git a/hw/bsp/mcx/boards/frdm_mcxa153/pin_mux.c b/hw/bsp/mcx/boards/frdm_mcxa153/pin_mux.c index cc8f56e63..fce756e72 100644 --- a/hw/bsp/mcx/boards/frdm_mcxa153/pin_mux.c +++ b/hw/bsp/mcx/boards/frdm_mcxa153/pin_mux.c @@ -4,7 +4,6 @@ * * SPDX-License-Identifier: BSD-3-Clause */ - /*********************************************************************************************************************** * This file was generated by the MCUXpresso Config Tools. Any manual edits made to this file * will be overwritten if the respective MCUXpresso Config Tools is used to update this file. @@ -18,16 +17,13 @@ product: Pins v14.0 processor: MCXA153 package_id: MCXA153VLH mcu_data: ksdk2_0 -processor_version: 0.14.3 -pin_labels: -- {pin_num: '38', pin_signal: P3_12/LPUART2_RTS_B/CT1_MAT2/PWM0_X0, label: LED_RED, identifier: LED_RED} +processor_version: 0.14.4 * BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS *********** */ /* clang-format on */ #include "fsl_common.h" #include "fsl_port.h" -#include "fsl_gpio.h" #include "pin_mux.h" /* FUNCTION ************************************************************************************************************ @@ -47,8 +43,10 @@ void BOARD_InitBootPins(void) BOARD_InitPins: - options: {callFromInitBoot: 'true', coreID: cm33_core0, enableClock: 'true'} - pin_list: - - {pin_num: '38', peripheral: GPIO3, signal: 'GPIO, 12', pin_signal: P3_12/LPUART2_RTS_B/CT1_MAT2/PWM0_X0, direction: OUTPUT, gpio_init_state: 'false', slew_rate: fast, - open_drain: disable, drive_strength: low, pull_select: down, pull_enable: disable, input_buffer: enable, invert_input: normal} + - {pin_num: '51', peripheral: LPUART0, signal: RX, pin_signal: P0_2/TDO/SWO/LPUART0_RXD/LPSPI0_SCK/CT0_MAT0/UTICK_CAP0/I3C0_PUR, slew_rate: fast, open_drain: disable, + drive_strength: low, pull_select: up, pull_enable: enable, input_buffer: enable, invert_input: normal} + - {pin_num: '52', peripheral: LPUART0, signal: TX, pin_signal: P0_3/TDI/LPUART0_TXD/LPSPI0_SDO/CT0_MAT1/UTICK_CAP1/CMP0_OUT/CMP1_IN1, slew_rate: fast, open_drain: disable, + drive_strength: low, pull_select: up, pull_enable: enable, input_buffer: enable, invert_input: normal} * BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS *********** */ /* clang-format on */ @@ -61,15 +59,6 @@ BOARD_InitPins: * END ****************************************************************************************************************/ void BOARD_InitPins(void) { - RESET_PeripheralReset(kLPUART0_RST_SHIFT_RSTn); - RESET_PeripheralReset(kPORT0_RST_SHIFT_RSTn); - CLOCK_SetClockDiv(kCLOCK_DivLPUART0, 1u); - CLOCK_AttachClk(kFRO12M_to_LPUART0); - - /* write to PORT0: Peripheral clock is enabled */ - CLOCK_EnableClock(kCLOCK_GatePORT0); - - /* Write to GPIO3: Peripheral clock is enabled */ CLOCK_EnableClock(kCLOCK_GateGPIO3); /* Write to PORT3: Peripheral clock is enabled */ CLOCK_EnableClock(kCLOCK_GatePORT3); @@ -78,30 +67,13 @@ void BOARD_InitPins(void) /* PORT3 peripheral is released from reset */ RESET_ReleasePeripheralReset(kPORT3_RST_SHIFT_RSTn); - const port_pin_config_t port3_12_pin38_config = {/* Internal pull-up/down resistor is disabled */ - kPORT_PullDisable, - /* Low internal pull resistor value is selected. */ - kPORT_LowPullResistor, - /* Fast slew rate is configured */ - kPORT_FastSlewRate, - /* Passive input filter is disabled */ - kPORT_PassiveFilterDisable, - /* Open drain output is disabled */ - kPORT_OpenDrainDisable, - /* Low drive strength is configured */ - kPORT_LowDriveStrength, - /* Normal drive strength is configured */ - kPORT_NormalDriveStrength, - /* Pin is configured as P3_12 */ - kPORT_MuxAlt0, - /* Digital input enabled */ - kPORT_InputBufferEnable, - /* Digital input is not inverted */ - kPORT_InputNormal, - /* Pin Control Register fields [15:0] are not locked */ - kPORT_UnlockRegister}; - /* PORT3_12 (pin 38) is configured as P3_12 */ - PORT_SetPinConfig(PORT3, 12U, &port3_12_pin38_config); + + /* Write to PORT0: Peripheral clock is enabled */ + CLOCK_EnableClock(kCLOCK_GatePORT0); + /* LPUART0 peripheral is released from reset */ + RESET_ReleasePeripheralReset(kLPUART0_RST_SHIFT_RSTn); + /* PORT0 peripheral is released from reset */ + RESET_ReleasePeripheralReset(kPORT0_RST_SHIFT_RSTn); const port_pin_config_t port0_2_pin51_config = {/* Internal pull-up resistor is enabled */ kPORT_PullUp, @@ -152,7 +124,6 @@ void BOARD_InitPins(void) kPORT_UnlockRegister}; /* PORT0_3 (pin 52) is configured as LPUART0_TXD */ PORT_SetPinConfig(PORT0, 3U, &port0_3_pin52_config); - } /*********************************************************************************************************************** * EOF diff --git a/hw/bsp/mcx/boards/frdm_mcxa153/pin_mux.h b/hw/bsp/mcx/boards/frdm_mcxa153/pin_mux.h index 06b6fdee9..2c0e617a5 100644 --- a/hw/bsp/mcx/boards/frdm_mcxa153/pin_mux.h +++ b/hw/bsp/mcx/boards/frdm_mcxa153/pin_mux.h @@ -1,9 +1,13 @@ /* - * Copyright 2022 NXP + * Copyright 2023 NXP * All rights reserved. * * SPDX-License-Identifier: BSD-3-Clause */ +/*********************************************************************************************************************** + * This file was generated by the MCUXpresso Config Tools. Any manual edits made to this file + * will be overwritten if the respective MCUXpresso Config Tools is used to update this file. + **********************************************************************************************************************/ #ifndef _PIN_MUX_H_ #define _PIN_MUX_H_ diff --git a/hw/bsp/mcx/boards/frdm_mcxa156/board.cmake b/hw/bsp/mcx/boards/frdm_mcxa156/board.cmake new file mode 100644 index 000000000..a6aa6c2e4 --- /dev/null +++ b/hw/bsp/mcx/boards/frdm_mcxa156/board.cmake @@ -0,0 +1,21 @@ +set(MCU_VARIANT MCXA156) +set(MCU_CORE MCXA156) + +set(JLINK_DEVICE MCXA156_M33) +set(PYOCD_TARGET MCXA156) +set(NXPLINK_DEVICE MCXA156:MCXA156) + +set(PORT 0) + +function(update_board TARGET) + target_compile_definitions(${TARGET} PUBLIC + CPU_MCXA156VLH + BOARD_TUD_RHPORT=0 + BOARD_TUD_MAX_SPEED=OPT_MODE_FULL_SPEED + CFG_EXAMPLE_VIDEO_READONLY + ) + target_sources(${TARGET} PUBLIC + ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/clock_config.c + ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/pin_mux.c + ) +endfunction() diff --git a/hw/bsp/mcx/boards/frdm_mcxa156/board.h b/hw/bsp/mcx/boards/frdm_mcxa156/board.h new file mode 100644 index 000000000..6c19797c6 --- /dev/null +++ b/hw/bsp/mcx/boards/frdm_mcxa156/board.h @@ -0,0 +1,69 @@ +/* + * The MIT License (MIT) + * + * Copyright (c) 2021, Ha Thach (tinyusb.org) + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + * This file is part of the TinyUSB stack. + */ + +/* metadata: + name: Freedom MCXA156 + url: https://www.nxp.com/design/design-center/development-boards-and-designs/FRDM-MCXA156 +*/ + +#ifndef BOARD_H_ +#define BOARD_H_ + +#ifdef __cplusplus +extern "C" { +#endif + +// LED +#define LED_GPIO GPIO3 +#define LED_CLK kCLOCK_GateGPIO3 +#define LED_PIN 12 // red +#define LED_STATE_ON 0 + +// ISP button +#define BUTTON_GPIO GPIO0 +#define BUTTON_CLK kCLOCK_GateGPIO0 +#define BUTTON_PIN 6 //SW3 +#define BUTTON_STATE_ACTIVE 0 + +// UART +#define UART_DEV LPUART0 + +static inline void board_uart_init_clock(void) { + /* attach 12 MHz clock to LPUART0 (debug console) */ + CLOCK_SetClockDiv(kCLOCK_DivLPUART0, 1u); + CLOCK_AttachClk(kFRO12M_to_LPUART0); + + RESET_PeripheralReset(kLPUART0_RST_SHIFT_RSTn); +} + +// XTAL +#define XTAL0_CLK_HZ (24 * 1000 * 1000U) + +#ifdef __cplusplus +} +#endif + +#endif diff --git a/hw/bsp/mcx/boards/frdm_mcxa156/board.mk b/hw/bsp/mcx/boards/frdm_mcxa156/board.mk new file mode 100644 index 000000000..d4a59b32a --- /dev/null +++ b/hw/bsp/mcx/boards/frdm_mcxa156/board.mk @@ -0,0 +1,14 @@ +MCU_VARIANT = MCXA156 +MCU_CORE = MCXA156 +PORT = 0 + +CPU_CORE = cortex-m33-nodsp-nofp +CFLAGS += \ + -DCPU_MCXA156VLH \ + -DCFG_TUSB_MCU=OPT_MCU_MCXA15 \ + +JLINK_DEVICE = MCXA156 +PYOCD_TARGET = MCXA156 + +# flash using pyocd +flash: flash-jlink diff --git a/hw/bsp/mcx/boards/frdm_mcxa156/clock_config.c b/hw/bsp/mcx/boards/frdm_mcxa156/clock_config.c new file mode 100644 index 000000000..f549af243 --- /dev/null +++ b/hw/bsp/mcx/boards/frdm_mcxa156/clock_config.c @@ -0,0 +1,482 @@ +/* + * Copyright 2024 NXP + * + * SPDX-License-Identifier: BSD-3-Clause + */ + +/*********************************************************************************************************************** + * This file was generated by the MCUXpresso Config Tools. Any manual edits made to this file + * will be overwritten if the respective MCUXpresso Config Tools is used to update this file. + **********************************************************************************************************************/ +/* + * How to setup clock using clock driver functions: + * + * 1. Setup clock sources. + * + * 2. Set up wait states of the flash. + * + * 3. Set up all dividers. + * + * 4. Set up all selectors to provide selected clocks. + * + */ + +/* clang-format off */ +/* TEXT BELOW IS USED AS SETTING FOR TOOLS ************************************* +!!GlobalInfo +product: Clocks v13.0 +processor: MCXA156 +package_id: MCXA156VLL +mcu_data: ksdk2_0 +processor_version: 0.15.0 + * BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS **********/ +/* clang-format on */ + +#include "fsl_clock.h" +#include "clock_config.h" +#include "fsl_spc.h" + +/******************************************************************************* + * Definitions + ******************************************************************************/ + +/******************************************************************************* + * Variables + ******************************************************************************/ +/* System clock frequency. */ +//extern uint32_t SystemCoreClock; + +/******************************************************************************* + ************************ BOARD_InitBootClocks function ************************ + ******************************************************************************/ +void BOARD_InitBootClocks(void) +{ + BOARD_BootClockFRO96M(); +} + +/******************************************************************************* + ******************** Configuration BOARD_BootClockFRO12M ********************** + ******************************************************************************/ +/* clang-format off */ +/* TEXT BELOW IS USED AS SETTING FOR TOOLS ************************************* +!!Configuration +name: BOARD_BootClockFRO12M +outputs: +- {id: CLK_1M_clock.outFreq, value: 1 MHz} +- {id: CPU_clock.outFreq, value: 12 MHz} +- {id: FRO_12M_clock.outFreq, value: 12 MHz} +- {id: MAIN_clock.outFreq, value: 12 MHz} +- {id: Slow_clock.outFreq, value: 3 MHz} +- {id: System_clock.outFreq, value: 12 MHz} +- {id: UTICK_clock.outFreq, value: 1 MHz} +settings: +- {id: SCGMode, value: SIRC} +- {id: FRO_HF_PERIPHERALS_EN_CFG, value: Disabled} +- {id: MRCC.FREQMEREFCLKSEL.sel, value: MRCC.aoi0_out0} +- {id: MRCC.FREQMETARGETCLKSEL.sel, value: MRCC.aoi0_out0} +- {id: MRCC.OSTIMERCLKSEL.sel, value: VBAT.CLK16K_1} +- {id: SCG.SCSSEL.sel, value: SCG.SIRC} +- {id: SCG_FIRCCSR_FIRCEN_CFG, value: Disabled} + * BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS **********/ +/* clang-format on */ + +/******************************************************************************* + * Variables for BOARD_BootClockFRO12M configuration + ******************************************************************************/ +/******************************************************************************* + * Code for BOARD_BootClockFRO12M configuration + ******************************************************************************/ +void BOARD_BootClockFRO12M(void) +{ + uint32_t coreFreq; + spc_active_mode_core_ldo_option_t ldoOption; + spc_sram_voltage_config_t sramOption; + + /* Get the CPU Core frequency */ + coreFreq = CLOCK_GetCoreSysClkFreq(); + + /* The flow of increasing voltage and frequency */ + if (coreFreq <= BOARD_BOOTCLOCKFRO12M_CORE_CLOCK) { + /* Set the LDO_CORE VDD regulator level */ + ldoOption.CoreLDOVoltage = kSPC_CoreLDO_MidDriveVoltage; + ldoOption.CoreLDODriveStrength = kSPC_CoreLDO_NormalDriveStrength; + (void)SPC_SetActiveModeCoreLDORegulatorConfig(SPC0, &ldoOption); + /* Configure Flash to support different voltage level and frequency */ + FMU0->FCTRL = (FMU0->FCTRL & ~((uint32_t)FMU_FCTRL_RWSC_MASK)) | (FMU_FCTRL_RWSC(0x0U)); + /* Specifies the operating voltage for the SRAM's read/write timing margin */ + sramOption.operateVoltage = kSPC_sramOperateAt1P0V; + sramOption.requestVoltageUpdate = true; + (void)SPC_SetSRAMOperateVoltage(SPC0, &sramOption); + } + + CLOCK_SetupFRO12MClocking(); /*!< Setup FRO12M clock */ + + CLOCK_AttachClk(kFRO12M_to_MAIN_CLK); /* !< Switch MAIN_CLK to FRO12M */ + + /* The flow of decreasing voltage and frequency */ + if (coreFreq > BOARD_BOOTCLOCKFRO12M_CORE_CLOCK) { + /* Configure Flash to support different voltage level and frequency */ + FMU0->FCTRL = (FMU0->FCTRL & ~((uint32_t)FMU_FCTRL_RWSC_MASK)) | (FMU_FCTRL_RWSC(0x0U)); + /* Specifies the operating voltage for the SRAM's read/write timing margin */ + sramOption.operateVoltage = kSPC_sramOperateAt1P0V; + sramOption.requestVoltageUpdate = true; + (void)SPC_SetSRAMOperateVoltage(SPC0, &sramOption); + /* Set the LDO_CORE VDD regulator level */ + ldoOption.CoreLDOVoltage = kSPC_CoreLDO_MidDriveVoltage; + ldoOption.CoreLDODriveStrength = kSPC_CoreLDO_NormalDriveStrength; + (void)SPC_SetActiveModeCoreLDORegulatorConfig(SPC0, &ldoOption); + } + + /*!< Set up clock selectors - Attach clocks to the peripheries */ + + /*!< Set up dividers */ + CLOCK_SetClockDiv(kCLOCK_DivAHBCLK, 1U); /* !< Set AHBCLKDIV divider to value 1 */ + + /* Set SystemCoreClock variable */ + SystemCoreClock = BOARD_BOOTCLOCKFRO12M_CORE_CLOCK; +} +/******************************************************************************* + ******************** Configuration BOARD_BootClockFRO24M ********************** + ******************************************************************************/ +/* clang-format off */ +/* TEXT BELOW IS USED AS SETTING FOR TOOLS ************************************* +!!Configuration +name: BOARD_BootClockFRO24M +outputs: +- {id: CLK_1M_clock.outFreq, value: 1 MHz} +- {id: CLK_48M_clock.outFreq, value: 48 MHz} +- {id: CPU_clock.outFreq, value: 24 MHz} +- {id: FRO_12M_clock.outFreq, value: 12 MHz} +- {id: FRO_HF_DIV_clock.outFreq, value: 48 MHz} +- {id: FRO_HF_clock.outFreq, value: 48 MHz} +- {id: MAIN_clock.outFreq, value: 48 MHz} +- {id: Slow_clock.outFreq, value: 6 MHz} +- {id: System_clock.outFreq, value: 24 MHz} +- {id: UTICK_clock.outFreq, value: 1 MHz} +settings: +- {id: MRCC.FREQMEREFCLKSEL.sel, value: MRCC.aoi0_out0} +- {id: MRCC.FREQMETARGETCLKSEL.sel, value: MRCC.aoi0_out0} +- {id: MRCC.OSTIMERCLKSEL.sel, value: VBAT.CLK16K_1} +- {id: SYSCON.AHBCLKDIV.scale, value: '2', locked: true} + * BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS **********/ +/* clang-format on */ + +/******************************************************************************* + * Variables for BOARD_BootClockFRO24M configuration + ******************************************************************************/ +/******************************************************************************* + * Code for BOARD_BootClockFRO24M configuration + ******************************************************************************/ +void BOARD_BootClockFRO24M(void) +{ + uint32_t coreFreq; + spc_active_mode_core_ldo_option_t ldoOption; + spc_sram_voltage_config_t sramOption; + + /* Get the CPU Core frequency */ + coreFreq = CLOCK_GetCoreSysClkFreq(); + + /* The flow of increasing voltage and frequency */ + if (coreFreq <= BOARD_BOOTCLOCKFRO24M_CORE_CLOCK) { + /* Set the LDO_CORE VDD regulator level */ + ldoOption.CoreLDOVoltage = kSPC_CoreLDO_MidDriveVoltage; + ldoOption.CoreLDODriveStrength = kSPC_CoreLDO_NormalDriveStrength; + (void)SPC_SetActiveModeCoreLDORegulatorConfig(SPC0, &ldoOption); + /* Configure Flash to support different voltage level and frequency */ + FMU0->FCTRL = (FMU0->FCTRL & ~((uint32_t)FMU_FCTRL_RWSC_MASK)) | (FMU_FCTRL_RWSC(0x0U)); + /* Specifies the operating voltage for the SRAM's read/write timing margin */ + sramOption.operateVoltage = kSPC_sramOperateAt1P0V; + sramOption.requestVoltageUpdate = true; + (void)SPC_SetSRAMOperateVoltage(SPC0, &sramOption); + } + + CLOCK_SetupFROHFClocking(48000000U); /*!< Enable FRO HF(48MHz) output */ + + CLOCK_SetupFRO12MClocking(); /*!< Setup FRO12M clock */ + + CLOCK_AttachClk(kFRO_HF_to_MAIN_CLK); /* !< Switch MAIN_CLK to FRO_HF */ + + /* The flow of decreasing voltage and frequency */ + if (coreFreq > BOARD_BOOTCLOCKFRO24M_CORE_CLOCK) { + /* Configure Flash to support different voltage level and frequency */ + FMU0->FCTRL = (FMU0->FCTRL & ~((uint32_t)FMU_FCTRL_RWSC_MASK)) | (FMU_FCTRL_RWSC(0x0U)); + /* Specifies the operating voltage for the SRAM's read/write timing margin */ + sramOption.operateVoltage = kSPC_sramOperateAt1P0V; + sramOption.requestVoltageUpdate = true; + (void)SPC_SetSRAMOperateVoltage(SPC0, &sramOption); + /* Set the LDO_CORE VDD regulator level */ + ldoOption.CoreLDOVoltage = kSPC_CoreLDO_MidDriveVoltage; + ldoOption.CoreLDODriveStrength = kSPC_CoreLDO_NormalDriveStrength; + (void)SPC_SetActiveModeCoreLDORegulatorConfig(SPC0, &ldoOption); + } + + /*!< Set up clock selectors - Attach clocks to the peripheries */ + + /*!< Set up dividers */ + CLOCK_SetClockDiv(kCLOCK_DivAHBCLK, 2U); /* !< Set AHBCLKDIV divider to value 2 */ + CLOCK_SetClockDiv(kCLOCK_DivFRO_HF_DIV, 1U); /* !< Set FROHFDIV divider to value 1 */ + + /* Set SystemCoreClock variable */ + SystemCoreClock = BOARD_BOOTCLOCKFRO24M_CORE_CLOCK; +} +/******************************************************************************* + ******************** Configuration BOARD_BootClockFRO48M ********************** + ******************************************************************************/ +/* clang-format off */ +/* TEXT BELOW IS USED AS SETTING FOR TOOLS ************************************* +!!Configuration +name: BOARD_BootClockFRO48M +outputs: +- {id: CLK_1M_clock.outFreq, value: 1 MHz} +- {id: CLK_48M_clock.outFreq, value: 48 MHz} +- {id: CPU_clock.outFreq, value: 48 MHz} +- {id: FRO_12M_clock.outFreq, value: 12 MHz} +- {id: FRO_HF_DIV_clock.outFreq, value: 48 MHz} +- {id: FRO_HF_clock.outFreq, value: 48 MHz} +- {id: MAIN_clock.outFreq, value: 48 MHz} +- {id: Slow_clock.outFreq, value: 12 MHz} +- {id: System_clock.outFreq, value: 48 MHz} +- {id: UTICK_clock.outFreq, value: 1 MHz} +settings: +- {id: MRCC.FREQMEREFCLKSEL.sel, value: MRCC.aoi0_out0} +- {id: MRCC.FREQMETARGETCLKSEL.sel, value: MRCC.aoi0_out0} +- {id: MRCC.OSTIMERCLKSEL.sel, value: VBAT.CLK16K_1} + * BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS **********/ +/* clang-format on */ + +/******************************************************************************* + * Variables for BOARD_BootClockFRO48M configuration + ******************************************************************************/ +/******************************************************************************* + * Code for BOARD_BootClockFRO48M configuration + ******************************************************************************/ +void BOARD_BootClockFRO48M(void) +{ + uint32_t coreFreq; + spc_active_mode_core_ldo_option_t ldoOption; + spc_sram_voltage_config_t sramOption; + + /* Get the CPU Core frequency */ + coreFreq = CLOCK_GetCoreSysClkFreq(); + + /* The flow of increasing voltage and frequency */ + if (coreFreq <= BOARD_BOOTCLOCKFRO48M_CORE_CLOCK) { + /* Set the LDO_CORE VDD regulator level */ + ldoOption.CoreLDOVoltage = kSPC_CoreLDO_MidDriveVoltage; + ldoOption.CoreLDODriveStrength = kSPC_CoreLDO_NormalDriveStrength; + (void)SPC_SetActiveModeCoreLDORegulatorConfig(SPC0, &ldoOption); + /* Configure Flash to support different voltage level and frequency */ + FMU0->FCTRL = (FMU0->FCTRL & ~((uint32_t)FMU_FCTRL_RWSC_MASK)) | (FMU_FCTRL_RWSC(0x1U)); + /* Specifies the operating voltage for the SRAM's read/write timing margin */ + sramOption.operateVoltage = kSPC_sramOperateAt1P0V; + sramOption.requestVoltageUpdate = true; + (void)SPC_SetSRAMOperateVoltage(SPC0, &sramOption); + } + + CLOCK_SetupFROHFClocking(48000000U); /*!< Enable FRO HF(48MHz) output */ + + CLOCK_SetupFRO12MClocking(); /*!< Setup FRO12M clock */ + + CLOCK_AttachClk(kFRO_HF_to_MAIN_CLK); /* !< Switch MAIN_CLK to FRO_HF */ + + /* The flow of decreasing voltage and frequency */ + if (coreFreq > BOARD_BOOTCLOCKFRO48M_CORE_CLOCK) { + /* Configure Flash to support different voltage level and frequency */ + FMU0->FCTRL = (FMU0->FCTRL & ~((uint32_t)FMU_FCTRL_RWSC_MASK)) | (FMU_FCTRL_RWSC(0x1U)); + /* Specifies the operating voltage for the SRAM's read/write timing margin */ + sramOption.operateVoltage = kSPC_sramOperateAt1P0V; + sramOption.requestVoltageUpdate = true; + (void)SPC_SetSRAMOperateVoltage(SPC0, &sramOption); + /* Set the LDO_CORE VDD regulator level */ + ldoOption.CoreLDOVoltage = kSPC_CoreLDO_MidDriveVoltage; + ldoOption.CoreLDODriveStrength = kSPC_CoreLDO_NormalDriveStrength; + (void)SPC_SetActiveModeCoreLDORegulatorConfig(SPC0, &ldoOption); + } + + /*!< Set up clock selectors - Attach clocks to the peripheries */ + + /*!< Set up dividers */ + CLOCK_SetClockDiv(kCLOCK_DivAHBCLK, 1U); /* !< Set AHBCLKDIV divider to value 1 */ + CLOCK_SetClockDiv(kCLOCK_DivFRO_HF_DIV, 1U); /* !< Set FROHFDIV divider to value 1 */ + + /* Set SystemCoreClock variable */ + SystemCoreClock = BOARD_BOOTCLOCKFRO48M_CORE_CLOCK; +} +/******************************************************************************* + ******************** Configuration BOARD_BootClockFRO64M ********************** + ******************************************************************************/ +/* clang-format off */ +/* TEXT BELOW IS USED AS SETTING FOR TOOLS ************************************* +!!Configuration +name: BOARD_BootClockFRO64M +outputs: +- {id: CLK_1M_clock.outFreq, value: 1 MHz} +- {id: CLK_48M_clock.outFreq, value: 48 MHz} +- {id: CPU_clock.outFreq, value: 64 MHz} +- {id: FRO_12M_clock.outFreq, value: 12 MHz} +- {id: FRO_HF_DIV_clock.outFreq, value: 64 MHz} +- {id: FRO_HF_clock.outFreq, value: 64 MHz} +- {id: MAIN_clock.outFreq, value: 64 MHz} +- {id: Slow_clock.outFreq, value: 16 MHz} +- {id: System_clock.outFreq, value: 64 MHz} +- {id: UTICK_clock.outFreq, value: 1 MHz} +settings: +- {id: VDD_CORE, value: voltage_1v1} +- {id: MRCC.FREQMEREFCLKSEL.sel, value: MRCC.aoi0_out0} +- {id: MRCC.FREQMETARGETCLKSEL.sel, value: MRCC.aoi0_out0} +- {id: MRCC.FROHFDIV.scale, value: '1', locked: true} +- {id: MRCC.OSTIMERCLKSEL.sel, value: VBAT.CLK16K_1} +- {id: SYSCON.AHBCLKDIV.scale, value: '1', locked: true} +sources: +- {id: SCG.FIRC.outFreq, value: 64 MHz} + * BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS **********/ +/* clang-format on */ + +/******************************************************************************* + * Variables for BOARD_BootClockFRO64M configuration + ******************************************************************************/ +/******************************************************************************* + * Code for BOARD_BootClockFRO64M configuration + ******************************************************************************/ +void BOARD_BootClockFRO64M(void) +{ + uint32_t coreFreq; + spc_active_mode_core_ldo_option_t ldoOption; + spc_sram_voltage_config_t sramOption; + + /* Get the CPU Core frequency */ + coreFreq = CLOCK_GetCoreSysClkFreq(); + + /* The flow of increasing voltage and frequency */ + if (coreFreq <= BOARD_BOOTCLOCKFRO64M_CORE_CLOCK) { + /* Set the LDO_CORE VDD regulator level */ + ldoOption.CoreLDOVoltage = kSPC_CoreLDO_NormalVoltage; + ldoOption.CoreLDODriveStrength = kSPC_CoreLDO_NormalDriveStrength; + (void)SPC_SetActiveModeCoreLDORegulatorConfig(SPC0, &ldoOption); + /* Configure Flash to support different voltage level and frequency */ + FMU0->FCTRL = (FMU0->FCTRL & ~((uint32_t)FMU_FCTRL_RWSC_MASK)) | (FMU_FCTRL_RWSC(0x1U)); + /* Specifies the operating voltage for the SRAM's read/write timing margin */ + sramOption.operateVoltage = kSPC_sramOperateAt1P1V; + sramOption.requestVoltageUpdate = true; + (void)SPC_SetSRAMOperateVoltage(SPC0, &sramOption); + } + + CLOCK_SetupFROHFClocking(64000000U); /*!< Enable FRO HF(64MHz) output */ + + CLOCK_SetupFRO12MClocking(); /*!< Setup FRO12M clock */ + + CLOCK_AttachClk(kFRO_HF_to_MAIN_CLK); /* !< Switch MAIN_CLK to FRO_HF */ + + /* The flow of decreasing voltage and frequency */ + if (coreFreq > BOARD_BOOTCLOCKFRO64M_CORE_CLOCK) { + /* Configure Flash to support different voltage level and frequency */ + FMU0->FCTRL = (FMU0->FCTRL & ~((uint32_t)FMU_FCTRL_RWSC_MASK)) | (FMU_FCTRL_RWSC(0x1U)); + /* Specifies the operating voltage for the SRAM's read/write timing margin */ + sramOption.operateVoltage = kSPC_sramOperateAt1P1V; + sramOption.requestVoltageUpdate = true; + (void)SPC_SetSRAMOperateVoltage(SPC0, &sramOption); + /* Set the LDO_CORE VDD regulator level */ + ldoOption.CoreLDOVoltage = kSPC_CoreLDO_NormalVoltage; + ldoOption.CoreLDODriveStrength = kSPC_CoreLDO_NormalDriveStrength; + (void)SPC_SetActiveModeCoreLDORegulatorConfig(SPC0, &ldoOption); + } + + /*!< Set up clock selectors - Attach clocks to the peripheries */ + + /*!< Set up dividers */ + CLOCK_SetClockDiv(kCLOCK_DivAHBCLK, 1U); /* !< Set AHBCLKDIV divider to value 1 */ + CLOCK_SetClockDiv(kCLOCK_DivFRO_HF_DIV, 1U); /* !< Set FROHFDIV divider to value 1 */ + + /* Set SystemCoreClock variable */ + SystemCoreClock = BOARD_BOOTCLOCKFRO64M_CORE_CLOCK; +} +/******************************************************************************* + ******************** Configuration BOARD_BootClockFRO96M ********************** + ******************************************************************************/ +/* clang-format off */ +/* TEXT BELOW IS USED AS SETTING FOR TOOLS ************************************* +!!Configuration +name: BOARD_BootClockFRO96M +called_from_default_init: true +outputs: +- {id: CLK_1M_clock.outFreq, value: 1 MHz} +- {id: CLK_48M_clock.outFreq, value: 48 MHz} +- {id: CPU_clock.outFreq, value: 96 MHz} +- {id: FRO_12M_clock.outFreq, value: 12 MHz} +- {id: FRO_HF_DIV_clock.outFreq, value: 96 MHz} +- {id: FRO_HF_clock.outFreq, value: 96 MHz} +- {id: MAIN_clock.outFreq, value: 96 MHz} +- {id: Slow_clock.outFreq, value: 24 MHz} +- {id: System_clock.outFreq, value: 96 MHz} +- {id: UTICK_clock.outFreq, value: 1 MHz} +settings: +- {id: VDD_CORE, value: voltage_1v1} +- {id: CLKOUTDIV_HALT, value: Enable} +- {id: MRCC.FREQMEREFCLKSEL.sel, value: MRCC.aoi0_out0} +- {id: MRCC.FREQMETARGETCLKSEL.sel, value: MRCC.aoi0_out0} +- {id: MRCC.FROHFDIV.scale, value: '1', locked: true} +- {id: MRCC.OSTIMERCLKSEL.sel, value: VBAT.CLK16K_1} +- {id: SYSCON.AHBCLKDIV.scale, value: '1', locked: true} +sources: +- {id: SCG.FIRC.outFreq, value: 96 MHz} + * BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS **********/ +/* clang-format on */ + +/******************************************************************************* + * Variables for BOARD_BootClockFRO96M configuration + ******************************************************************************/ +/******************************************************************************* + * Code for BOARD_BootClockFRO96M configuration + ******************************************************************************/ +void BOARD_BootClockFRO96M(void) +{ + uint32_t coreFreq; + spc_active_mode_core_ldo_option_t ldoOption; + spc_sram_voltage_config_t sramOption; + + /* Get the CPU Core frequency */ + coreFreq = CLOCK_GetCoreSysClkFreq(); + + /* The flow of increasing voltage and frequency */ + if (coreFreq <= BOARD_BOOTCLOCKFRO96M_CORE_CLOCK) { + /* Set the LDO_CORE VDD regulator level */ + ldoOption.CoreLDOVoltage = kSPC_CoreLDO_NormalVoltage; + ldoOption.CoreLDODriveStrength = kSPC_CoreLDO_NormalDriveStrength; + (void)SPC_SetActiveModeCoreLDORegulatorConfig(SPC0, &ldoOption); + /* Configure Flash to support different voltage level and frequency */ + FMU0->FCTRL = (FMU0->FCTRL & ~((uint32_t)FMU_FCTRL_RWSC_MASK)) | (FMU_FCTRL_RWSC(0x2U)); + /* Specifies the operating voltage for the SRAM's read/write timing margin */ + sramOption.operateVoltage = kSPC_sramOperateAt1P1V; + sramOption.requestVoltageUpdate = true; + (void)SPC_SetSRAMOperateVoltage(SPC0, &sramOption); + } + + CLOCK_SetupFROHFClocking(96000000U); /*!< Enable FRO HF(96MHz) output */ + + CLOCK_SetupFRO12MClocking(); /*!< Setup FRO12M clock */ + + CLOCK_AttachClk(kFRO_HF_to_MAIN_CLK); /* !< Switch MAIN_CLK to FRO_HF */ + + /* The flow of decreasing voltage and frequency */ + if (coreFreq > BOARD_BOOTCLOCKFRO96M_CORE_CLOCK) { + /* Configure Flash to support different voltage level and frequency */ + FMU0->FCTRL = (FMU0->FCTRL & ~((uint32_t)FMU_FCTRL_RWSC_MASK)) | (FMU_FCTRL_RWSC(0x2U)); + /* Specifies the operating voltage for the SRAM's read/write timing margin */ + sramOption.operateVoltage = kSPC_sramOperateAt1P1V; + sramOption.requestVoltageUpdate = true; + (void)SPC_SetSRAMOperateVoltage(SPC0, &sramOption); + /* Set the LDO_CORE VDD regulator level */ + ldoOption.CoreLDOVoltage = kSPC_CoreLDO_NormalVoltage; + ldoOption.CoreLDODriveStrength = kSPC_CoreLDO_NormalDriveStrength; + (void)SPC_SetActiveModeCoreLDORegulatorConfig(SPC0, &ldoOption); + } + + /*!< Set up clock selectors - Attach clocks to the peripheries */ + + /*!< Set up dividers */ + CLOCK_SetClockDiv(kCLOCK_DivAHBCLK, 1U); /* !< Set AHBCLKDIV divider to value 1 */ + CLOCK_SetClockDiv(kCLOCK_DivFRO_HF_DIV, 1U); /* !< Set FROHFDIV divider to value 1 */ + + /* Set SystemCoreClock variable */ + SystemCoreClock = BOARD_BOOTCLOCKFRO96M_CORE_CLOCK; +} diff --git a/hw/bsp/mcx/boards/frdm_mcxa156/clock_config.h b/hw/bsp/mcx/boards/frdm_mcxa156/clock_config.h new file mode 100644 index 000000000..db80b79f3 --- /dev/null +++ b/hw/bsp/mcx/boards/frdm_mcxa156/clock_config.h @@ -0,0 +1,170 @@ +/* + * Copyright 2024 NXP + * + * SPDX-License-Identifier: BSD-3-Clause + */ + +/*********************************************************************************************************************** + * This file was generated by the MCUXpresso Config Tools. Any manual edits made to this file + * will be overwritten if the respective MCUXpresso Config Tools is used to update this file. + **********************************************************************************************************************/ + +#ifndef _CLOCK_CONFIG_H_ +#define _CLOCK_CONFIG_H_ + +#include "fsl_common.h" + +/******************************************************************************* + * Definitions + ******************************************************************************/ + +/******************************************************************************* + ************************ BOARD_InitBootClocks function ************************ + ******************************************************************************/ + +#if defined(__cplusplus) +extern "C" { +#endif /* __cplusplus*/ + +/*! + * @brief This function executes default configuration of clocks. + * + */ +void BOARD_InitBootClocks(void); + +#if defined(__cplusplus) +} +#endif /* __cplusplus*/ + +/******************************************************************************* + ******************** Configuration BOARD_BootClockFRO12M ********************** + ******************************************************************************/ +/******************************************************************************* + * Definitions for BOARD_BootClockFRO12M configuration + ******************************************************************************/ +#define BOARD_BOOTCLOCKFRO12M_CORE_CLOCK 12000000U /*!< Core clock frequency: 12000000Hz */ + + +/******************************************************************************* + * API for BOARD_BootClockFRO12M configuration + ******************************************************************************/ +#if defined(__cplusplus) +extern "C" { +#endif /* __cplusplus*/ + +/*! + * @brief This function executes configuration of clocks. + * + */ +void BOARD_BootClockFRO12M(void); + +#if defined(__cplusplus) +} +#endif /* __cplusplus*/ + +/******************************************************************************* + ******************** Configuration BOARD_BootClockFRO24M ********************** + ******************************************************************************/ +/******************************************************************************* + * Definitions for BOARD_BootClockFRO24M configuration + ******************************************************************************/ +#define BOARD_BOOTCLOCKFRO24M_CORE_CLOCK 24000000U /*!< Core clock frequency: 24000000Hz */ + + +/******************************************************************************* + * API for BOARD_BootClockFRO24M configuration + ******************************************************************************/ +#if defined(__cplusplus) +extern "C" { +#endif /* __cplusplus*/ + +/*! + * @brief This function executes configuration of clocks. + * + */ +void BOARD_BootClockFRO24M(void); + +#if defined(__cplusplus) +} +#endif /* __cplusplus*/ + +/******************************************************************************* + ******************** Configuration BOARD_BootClockFRO48M ********************** + ******************************************************************************/ +/******************************************************************************* + * Definitions for BOARD_BootClockFRO48M configuration + ******************************************************************************/ +#define BOARD_BOOTCLOCKFRO48M_CORE_CLOCK 48000000U /*!< Core clock frequency: 48000000Hz */ + + +/******************************************************************************* + * API for BOARD_BootClockFRO48M configuration + ******************************************************************************/ +#if defined(__cplusplus) +extern "C" { +#endif /* __cplusplus*/ + +/*! + * @brief This function executes configuration of clocks. + * + */ +void BOARD_BootClockFRO48M(void); + +#if defined(__cplusplus) +} +#endif /* __cplusplus*/ + +/******************************************************************************* + ******************** Configuration BOARD_BootClockFRO64M ********************** + ******************************************************************************/ +/******************************************************************************* + * Definitions for BOARD_BootClockFRO64M configuration + ******************************************************************************/ +#define BOARD_BOOTCLOCKFRO64M_CORE_CLOCK 64000000U /*!< Core clock frequency: 64000000Hz */ + + +/******************************************************************************* + * API for BOARD_BootClockFRO64M configuration + ******************************************************************************/ +#if defined(__cplusplus) +extern "C" { +#endif /* __cplusplus*/ + +/*! + * @brief This function executes configuration of clocks. + * + */ +void BOARD_BootClockFRO64M(void); + +#if defined(__cplusplus) +} +#endif /* __cplusplus*/ + +/******************************************************************************* + ******************** Configuration BOARD_BootClockFRO96M ********************** + ******************************************************************************/ +/******************************************************************************* + * Definitions for BOARD_BootClockFRO96M configuration + ******************************************************************************/ +#define BOARD_BOOTCLOCKFRO96M_CORE_CLOCK 96000000U /*!< Core clock frequency: 96000000Hz */ + + +/******************************************************************************* + * API for BOARD_BootClockFRO96M configuration + ******************************************************************************/ +#if defined(__cplusplus) +extern "C" { +#endif /* __cplusplus*/ + +/*! + * @brief This function executes configuration of clocks. + * + */ +void BOARD_BootClockFRO96M(void); + +#if defined(__cplusplus) +} +#endif /* __cplusplus*/ + +#endif /* _CLOCK_CONFIG_H_ */ + diff --git a/hw/bsp/mcx/boards/frdm_mcxa156/pin_mux.c b/hw/bsp/mcx/boards/frdm_mcxa156/pin_mux.c new file mode 100644 index 000000000..317c311b5 --- /dev/null +++ b/hw/bsp/mcx/boards/frdm_mcxa156/pin_mux.c @@ -0,0 +1,144 @@ +/* + * Copyright 2024 NXP + * + * SPDX-License-Identifier: BSD-3-Clause + */ + +/*********************************************************************************************************************** + * This file was generated by the MCUXpresso Config Tools. Any manual edits made to this file + * will be overwritten if the respective MCUXpresso Config Tools is used to update this file. + **********************************************************************************************************************/ + +/* clang-format off */ +/* + * TEXT BELOW IS USED AS SETTING FOR TOOLS ************************************* +!!GlobalInfo +product: Pins v15.0 +processor: MCXA156 +package_id: MCXA156VLL +mcu_data: ksdk2_0 +processor_version: 0.15.0 + * BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS *********** + */ +/* clang-format on */ + +#include "fsl_common.h" +#include "fsl_port.h" +#include "pin_mux.h" + +/* FUNCTION ************************************************************************************************************ + * + * Function Name : BOARD_InitBootPins + * Description : Calls initialization functions. + * + * END ****************************************************************************************************************/ +void BOARD_InitBootPins(void) +{ + BOARD_InitPins(); +} + +/* clang-format off */ +/* + * TEXT BELOW IS USED AS SETTING FOR TOOLS ************************************* +BOARD_InitPins: +- options: {callFromInitBoot: 'true', coreID: cm33_core0, enableClock: 'true'} +- pin_list: + - {pin_num: '78', peripheral: LPUART0, signal: RX, pin_signal: P0_2/TDO/SWO/LPUART0_RXD/LPSPI0_SCK/CT0_MAT0/UTICK_CAP0/FLEXIO0_D2, slew_rate: fast, open_drain: disable, + drive_strength: low, pull_select: up, pull_enable: enable, input_buffer: enable, invert_input: normal} + - {pin_num: '79', peripheral: LPUART0, signal: TX, pin_signal: P0_3/TDI/LPUART0_TXD/LPSPI0_SDO/CT0_MAT1/UTICK_CAP1/FLEXIO0_D3/CMP0_OUT, slew_rate: fast, open_drain: disable, + drive_strength: low, pull_select: up, pull_enable: enable, input_buffer: enable, invert_input: normal} + * BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS *********** + */ +/* clang-format on */ + +/* FUNCTION ************************************************************************************************************ + * + * Function Name : BOARD_InitPins + * Description : Configures pin routing and optionally pin electrical features. + * + * END ****************************************************************************************************************/ +void BOARD_InitPins(void) +{ + + RESET_PeripheralReset(kLPUART0_RST_SHIFT_RSTn); + CLOCK_SetClockDiv(kCLOCK_DivLPUART0, 1u); + CLOCK_AttachClk(kFRO12M_to_LPUART0); + + /* GPIO3: Peripheral clock is enabled */ + CLOCK_EnableClock(kCLOCK_GateGPIO3); + /* PORT3: Peripheral clock is enabled */ + CLOCK_EnableClock(kCLOCK_GatePORT3); + /* GPIO3 peripheral is released from reset */ + RESET_ReleasePeripheralReset(kGPIO3_RST_SHIFT_RSTn); + /* PORT3 peripheral is released from reset */ + RESET_ReleasePeripheralReset(kPORT3_RST_SHIFT_RSTn); + + /* GPIO3: Peripheral clock is enabled */ + CLOCK_EnableClock(kCLOCK_GateGPIO0); + /* PORT3: Peripheral clock is enabled */ + CLOCK_EnableClock(kCLOCK_GatePORT0); + /* GPIO3 peripheral is released from reset */ + RESET_ReleasePeripheralReset(kGPIO0_RST_SHIFT_RSTn); + /* PORT3 peripheral is released from reset */ + RESET_ReleasePeripheralReset(kPORT0_RST_SHIFT_RSTn); + + /* PORT0: Peripheral clock is enabled */ + CLOCK_EnableClock(kCLOCK_GatePORT0); + /* LPUART0 peripheral is released from reset */ + RESET_ReleasePeripheralReset(kLPUART0_RST_SHIFT_RSTn); + /* PORT0 peripheral is released from reset */ + RESET_ReleasePeripheralReset(kPORT0_RST_SHIFT_RSTn); + + const port_pin_config_t port0_2_pin78_config = {/* Internal pull-up resistor is enabled */ + kPORT_PullUp, + /* Low internal pull resistor value is selected. */ + kPORT_LowPullResistor, + /* Fast slew rate is configured */ + kPORT_FastSlewRate, + /* Passive input filter is disabled */ + kPORT_PassiveFilterDisable, + /* Open drain output is disabled */ + kPORT_OpenDrainDisable, + /* Low drive strength is configured */ + kPORT_LowDriveStrength, + /* Normal drive strength is configured */ + kPORT_NormalDriveStrength, + /* Pin is configured as LPUART0_RXD */ + kPORT_MuxAlt2, + /* Digital input enabled */ + kPORT_InputBufferEnable, + /* Digital input is not inverted */ + kPORT_InputNormal, + /* Pin Control Register fields [15:0] are not locked */ + kPORT_UnlockRegister}; + /* PORT0_2 (pin 78) is configured as LPUART0_RXD */ + PORT_SetPinConfig(PORT0, 2U, &port0_2_pin78_config); + + const port_pin_config_t port0_3_pin79_config = {/* Internal pull-up resistor is enabled */ + kPORT_PullUp, + /* Low internal pull resistor value is selected. */ + kPORT_LowPullResistor, + /* Fast slew rate is configured */ + kPORT_FastSlewRate, + /* Passive input filter is disabled */ + kPORT_PassiveFilterDisable, + /* Open drain output is disabled */ + kPORT_OpenDrainDisable, + /* Low drive strength is configured */ + kPORT_LowDriveStrength, + /* Normal drive strength is configured */ + kPORT_NormalDriveStrength, + /* Pin is configured as LPUART0_TXD */ + kPORT_MuxAlt2, + /* Digital input enabled */ + kPORT_InputBufferEnable, + /* Digital input is not inverted */ + kPORT_InputNormal, + /* Pin Control Register fields [15:0] are not locked */ + kPORT_UnlockRegister}; + /* PORT0_3 (pin 79) is configured as LPUART0_TXD */ + PORT_SetPinConfig(PORT0, 3U, &port0_3_pin79_config); +} +/*********************************************************************************************************************** + * EOF + **********************************************************************************************************************/ diff --git a/hw/bsp/mcx/boards/frdm_mcxa156/pin_mux.h b/hw/bsp/mcx/boards/frdm_mcxa156/pin_mux.h new file mode 100644 index 000000000..fb7d1fc04 --- /dev/null +++ b/hw/bsp/mcx/boards/frdm_mcxa156/pin_mux.h @@ -0,0 +1,51 @@ +/* + * Copyright 2024 NXP + * + * SPDX-License-Identifier: BSD-3-Clause + */ + +/*********************************************************************************************************************** + * This file was generated by the MCUXpresso Config Tools. Any manual edits made to this file + * will be overwritten if the respective MCUXpresso Config Tools is used to update this file. + **********************************************************************************************************************/ + +#ifndef _PIN_MUX_H_ +#define _PIN_MUX_H_ + +/*! + * @addtogroup pin_mux + * @{ + */ + +/*********************************************************************************************************************** + * API + **********************************************************************************************************************/ + +#if defined(__cplusplus) +extern "C" { +#endif + +/*! + * @brief Calls initialization functions. + * + */ +void BOARD_InitBootPins(void); + +/*! + * @brief Configures pin routing and optionally pin electrical features. + * + */ +void BOARD_InitPins(void); + +#if defined(__cplusplus) +} +#endif + +/*! + * @} + */ +#endif /* _PIN_MUX_H_ */ + +/*********************************************************************************************************************** + * EOF + **********************************************************************************************************************/ diff --git a/hw/bsp/mcx/boards/frdm_mcxn947/board.h b/hw/bsp/mcx/boards/frdm_mcxn947/board.h index a35b6818a..bb15620ef 100644 --- a/hw/bsp/mcx/boards/frdm_mcxn947/board.h +++ b/hw/bsp/mcx/boards/frdm_mcxn947/board.h @@ -49,17 +49,22 @@ #define BUTTON_STATE_ACTIVE 0 // UART -#define UART_DEV LPUART4 +#define UART_DEV LPUART4 +#define LP_FLEXCOMM_INST 4 + +#include "fsl_lpflexcomm.h" static inline void board_uart_init_clock(void) { + /* attach FRO 12M to FLEXCOMM4 */ + + LP_FLEXCOMM_Init(LP_FLEXCOMM_INST, LP_FLEXCOMM_PERIPH_LPUART); + CLOCK_SetClkDiv(kCLOCK_DivFlexcom4Clk, 1u); CLOCK_AttachClk(kFRO12M_to_FLEXCOMM4); RESET_ClearPeripheralReset(kFC4_RST_SHIFT_RSTn); -} -//#define UART_RX_PINMUX 0, 24, IOCON_PIO_DIG_FUNC1_EN -//#define UART_TX_PINMUX 0, 25, IOCON_PIO_DIG_FUNC1_EN +} // XTAL #define XTAL0_CLK_HZ (24 * 1000 * 1000U) diff --git a/hw/bsp/mcx/drivers/spc/fsl_spc.c b/hw/bsp/mcx/drivers/spc/fsl_spc.c new file mode 100644 index 000000000..c6a9b2932 --- /dev/null +++ b/hw/bsp/mcx/drivers/spc/fsl_spc.c @@ -0,0 +1,1680 @@ +/* + * Copyright 2022-2024 NXP + * All rights reserved. + * + * SPDX-License-Identifier: BSD-3-Clause + */ + +#include "fsl_spc.h" + +/* Component ID definition, used by tools. */ +#ifndef FSL_COMPONENT_ID +#define FSL_COMPONENT_ID "platform.drivers.mcx_spc" +#endif + +/* + * $Coverage Justification Reference$ + * + * $Justification spc_c_ref_1$ + * The SPC busy status flag is too short to get coverage data. + */ + +/******************************************************************************* + * Definitions + ******************************************************************************/ + +/******************************************************************************* + * Prototypes + ******************************************************************************/ + +/******************************************************************************* + * Variables + ******************************************************************************/ + +/******************************************************************************* + * Code + ******************************************************************************/ + +/*! + * brief Gets selected power domain's requested low power mode. + * + * param base SPC peripheral base address. + * param powerDomainId Power Domain Id, please refer to spc_power_domain_id_t. + * + * return The selected power domain's requested low power mode, please refer to spc_power_domain_low_power_mode_t. + */ +spc_power_domain_low_power_mode_t SPC_GetPowerDomainLowPowerMode(SPC_Type *base, spc_power_domain_id_t powerDomainId) +{ + assert((uint8_t)powerDomainId < SPC_PD_STATUS_COUNT); + + uint32_t val; + + val = ((base->PD_STATUS[(uint8_t)powerDomainId] & SPC_PD_STATUS_LP_MODE_MASK) >> SPC_PD_STATUS_LP_MODE_SHIFT); + return (spc_power_domain_low_power_mode_t)val; +} + +/*! + * brief Gets Isolation status for each power domains. + * + * This function gets the status which indicates whether certain + * peripheral and the IO pads are in a latched state as a result + * of having been in POWERDOWN mode. + * + * param base SPC peripheral base address. + * return Current isolation status for each power domains. + */ +uint8_t SPC_GetPeriphIOIsolationStatus(SPC_Type *base) +{ + uint32_t reg; + + reg = base->SC; + return (uint8_t)((reg & SPC_SC_ISO_CLR_MASK) >> SPC_SC_ISO_CLR_SHIFT); +} + +/*! + * brief Configs Low power request output pin. + * + * This function configs the low power request output pin + * + * param base SPC peripheral base address. + * param config Pointer the spc_LowPower_Request_config_t structure. + */ +void SPC_SetLowPowerRequestConfig(SPC_Type *base, const spc_lowpower_request_config_t *config) +{ + assert(config != NULL); + + uint32_t reg; + + reg = base->LPREQ_CFG; + reg &= ~(SPC_LPREQ_CFG_LPREQOE_MASK | SPC_LPREQ_CFG_LPREQPOL_MASK | SPC_LPREQ_CFG_LPREQOV_MASK); + + if (config->enable) + { + reg |= SPC_LPREQ_CFG_LPREQOE_MASK | SPC_LPREQ_CFG_LPREQPOL((uint8_t)(config->polarity)) | + SPC_LPREQ_CFG_LPREQOV((uint8_t)(config->override)); + } + else + { + reg &= ~SPC_LPREQ_CFG_LPREQOE_MASK; + } + + base->LPREQ_CFG = reg; +} + +#if !(defined(FSL_FEATURE_MCX_SPC_HAS_NO_GLITCH_DETECT) && FSL_FEATURE_MCX_SPC_HAS_NO_GLITCH_DETECT) +/*! + * brief Configures VDD Core Glitch detector, including ripple counter selection, timeout value and so on. + * + * param base SPC peripheral base address. + * param config Pointer to the structure in type of spc_vdd_core_glitch_detector_config_t. + */ +void SPC_ConfigVddCoreGlitchDetector(SPC_Type *base, const spc_vdd_core_glitch_detector_config_t *config) +{ + assert(config != NULL); + + uint32_t reg; + + reg = (base->VDD_CORE_GLITCH_DETECT_SC) & + ~(SPC_VDD_CORE_GLITCH_DETECT_SC_CNT_SELECT_MASK | SPC_VDD_CORE_GLITCH_DETECT_SC_TIMEOUT_MASK | + SPC_VDD_CORE_GLITCH_DETECT_SC_RE_MASK | SPC_VDD_CORE_GLITCH_DETECT_SC_IE_MASK); + + reg |= SPC_VDD_CORE_GLITCH_DETECT_SC_CNT_SELECT(config->rippleCounterSelect) | + SPC_VDD_CORE_GLITCH_DETECT_SC_TIMEOUT(config->resetTimeoutValue) | + SPC_VDD_CORE_GLITCH_DETECT_SC_RE(config->enableReset) | + SPC_VDD_CORE_GLITCH_DETECT_SC_IE(config->enableInterrupt); + + base->VDD_CORE_GLITCH_DETECT_SC = reg; +} +#endif + +/*! + * brief Set SRAM operate voltage. + * + * param base SPC peripheral base address. + * param config The pointer to spc_sram_voltage_config_t, specifies the configuration of sram voltage. + */ +void SPC_SetSRAMOperateVoltage(SPC_Type *base, const spc_sram_voltage_config_t *config) +{ + assert(config != NULL); + + uint32_t reg = 0UL; + + reg |= SPC_SRAMCTL_VSM(config->operateVoltage); + + base->SRAMCTL = reg; + + if (config->requestVoltageUpdate) + { + base->SRAMCTL |= SPC_SRAMCTL_REQ_MASK; + while ((base->SRAMCTL & SPC_SRAMCTL_ACK_MASK) == 0UL) + { + /* Wait until acknowledged */ + ; + } + base->SRAMCTL &= ~SPC_SRAMCTL_REQ_MASK; + } +} + +/*! + * brief Configs Bandgap mode in Active mode. + * + * @note To disable bandgap in Active mode: + * 1. Disable all LVD's and HVD's in active mode; + * 2. Disable Glitch detect; + * 3. Configrue LDO's and DCDC to low drive strength in active mode; + * 4. Invoke this function to disable bandgap in active mode; + * otherwise the error status will be reported. + * + * @note Some other system resources(such as PLL, CMP) require bandgap to be enabled, to disable bandgap please + * take care of other system resources. + * + * param base SPC peripheral base address. + * param mode The Bandgap mode be selected. + * + * retval kStatus_SPC_BandgapModeWrong The Bandgap can not be disabled in active mode. + * retval kStatus_Success Config Bandgap mode in Active power mode successful. + */ +status_t SPC_SetActiveModeBandgapModeConfig(SPC_Type *base, spc_bandgap_mode_t mode) +{ + uint32_t reg; + uint32_t state; + + reg = base->ACTIVE_CFG; + + if (mode == kSPC_BandgapDisabled) + { + state = SPC_GetActiveModeVoltageDetectStatus(base); + + /* If any of the LVD/HVDs are kept enabled, bandgap mode must be enabled with buffer disabled. */ + if (state != 0UL) + { + return kStatus_SPC_BandgapModeWrong; + } + + /* The bandgap mode must be enabled if any regulators' drive strength set as Normal. */ +#if (defined(FSL_FEATURE_MCX_SPC_HAS_SYS_LDO) && FSL_FEATURE_MCX_SPC_HAS_SYS_LDO) + if ((base->ACTIVE_CFG & SPC_ACTIVE_CFG_SYSLDO_VDD_DS_MASK) == + SPC_ACTIVE_CFG_SYSLDO_VDD_DS(kSPC_SysLDO_NormalDriveStrength)) + { + return kStatus_SPC_BandgapModeWrong; + } +#endif /* FSL_FEATURE_MCX_SPC_HAS_SYS_LDO */ + +#if (defined(FSL_FEATURE_MCX_SPC_HAS_DCDC) && FSL_FEATURE_MCX_SPC_HAS_DCDC) + if ((base->ACTIVE_CFG & SPC_ACTIVE_CFG_DCDC_VDD_DS_MASK) == SPC_ACTIVE_CFG_DCDC_VDD_DS(kSPC_DCDC_NormalVoltage)) + { + return kStatus_SPC_BandgapModeWrong; + } +#endif /* FSL_FEATURE_MCX_SPC_HAS_DCDC */ + +#if !(defined(FSL_FEATURE_MCX_SPC_HAS_NO_GLITCH_DETECT) && FSL_FEATURE_MCX_SPC_HAS_NO_GLITCH_DETECT) + /* state of GLITCH_DETECT_DISABLE will be ignored if bandgap is disabled. */ + if ((base->ACTIVE_CFG & SPC_ACTIVE_CFG_GLITCH_DETECT_DISABLE_MASK) == 0UL) + { + return kStatus_SPC_BandgapModeWrong; + } +#endif +#if defined(FSL_FEATURE_SPC_HAS_CORELDO_VDD_DS) && FSL_FEATURE_SPC_HAS_CORELDO_VDD_DS + if ((base->ACTIVE_CFG & SPC_ACTIVE_CFG_CORELDO_VDD_DS_MASK) == + SPC_ACTIVE_CFG_CORELDO_VDD_DS(kSPC_CoreLDO_NormalDriveStrength)) + { + return kStatus_SPC_BandgapModeWrong; + } +#endif /* FSL_FEATURE_SPC_HAS_CORELDO_VDD_DS */ + } + + reg &= ~SPC_ACTIVE_CFG_BGMODE_MASK; + reg |= SPC_ACTIVE_CFG_BGMODE(mode); + + base->ACTIVE_CFG = reg; + + return kStatus_Success; +} + +/*! + * brief Configs Bandgap mode in Low Power mode. + * + * @note To disable Bandgap in Low-power mode: + * 1. Disable all LVD's ad HVD's in low power mode; + * 2. Disable Glitch detect in low power mode; + * 3. Configure LDO's and DCDC to low drive strength in low power mode; + * 4. Disable bandgap in low power mode; + * Otherwise, the error status will be reported. + * + * @note Some other system resources(such as PLL, CMP) require bandgap to be enabled, to disable bandgap please + * take care of other system resources. + * + * param base SPC peripheral base address. + * param mode The Bandgap mode be selected. + * + * retval kStatus_SPC_BandgapModeWrong The bandgap mode setting in Low Power mode is wrong. + * retval kStatus_Success Config Bandgap mode in Low Power power mode successful. + */ +status_t SPC_SetLowPowerModeBandgapmodeConfig(SPC_Type *base, spc_bandgap_mode_t mode) +{ + uint32_t reg; + uint32_t state; + + reg = base->LP_CFG; + + if (mode == kSPC_BandgapDisabled) + { + state = (uint32_t)SPC_GetLowPowerModeVoltageDetectStatus(base); + + /* If any of the LVD/HVDs are kept enabled, bandgap mode must be enabled with buffer disabled. */ + if (state != 0UL) + { + return kStatus_SPC_BandgapModeWrong; + } + +#if (defined(FSL_FEATURE_MCX_SPC_HAS_DCDC) && FSL_FEATURE_MCX_SPC_HAS_DCDC) + if ((base->LP_CFG & SPC_LP_CFG_DCDC_VDD_DS_MASK) == SPC_LP_CFG_DCDC_VDD_DS(kSPC_DCDC_NormalDriveStrength)) + { + return kStatus_SPC_BandgapModeWrong; + } +#endif /* FSL_FEATURE_MCX_SPC_HAS_DCDC */ + +#if (defined(FSL_FEATURE_MCX_SPC_HAS_SYS_LDO) && FSL_FEATURE_MCX_SPC_HAS_SYS_LDO) + if ((base->LP_CFG & SPC_LP_CFG_SYSLDO_VDD_DS_MASK) == SPC_LP_CFG_SYSLDO_VDD_DS(kSPC_SysLDO_NormalDriveStrength)) + { + return kStatus_SPC_BandgapModeWrong; + } +#endif /* FSL_FEATURE_MCX_SPC_HAS_SYS_LDO */ + + if ((base->LP_CFG & SPC_LP_CFG_CORELDO_VDD_DS_MASK) == + SPC_LP_CFG_CORELDO_VDD_DS(kSPC_CoreLDO_NormalDriveStrength)) + { + return kStatus_SPC_BandgapModeWrong; + } + +#if !(defined(FSL_FEATURE_MCX_SPC_HAS_NO_GLITCH_DETECT) && FSL_FEATURE_MCX_SPC_HAS_NO_GLITCH_DETECT) + /* state of GLITCH_DETECT_DISABLE will be ignored if bandgap is disabled. */ + if ((base->LP_CFG & SPC_LP_CFG_GLITCH_DETECT_DISABLE_MASK) == 0UL) + { + return kStatus_SPC_BandgapModeWrong; + } +#endif + } + + reg &= ~SPC_LP_CFG_BGMODE_MASK; + reg |= SPC_LP_CFG_BGMODE(mode); + base->LP_CFG = reg; + + return kStatus_Success; +} + +/*! + * brief Configs CORE voltage detect options. + * + * This function configs CORE voltage detect options. + * Note: Setting both the voltage detect interrupt and reset + * enable will cause interrupt to be generated on exit from reset. + * If those conditioned is not desired, interrupt/reset only one is enabled. + * + * param base SPC peripheral base address. + * param config Pointer to spc_core_voltage_detect_config_t structure. + */ +void SPC_SetCoreVoltageDetectConfig(SPC_Type *base, const spc_core_voltage_detect_config_t *config) +{ + assert(config != NULL); + + uint32_t reg = 0UL; + +#if (defined(FSL_FEATURE_MCX_SPC_HAS_COREVDD_HVD) && FSL_FEATURE_MCX_SPC_HAS_COREVDD_HVD) + reg |= (config->option.HVDInterruptEnable) ? SPC_VD_CORE_CFG_HVDIE(1U) : SPC_VD_CORE_CFG_HVDIE(0U); + reg |= (config->option.HVDResetEnable) ? SPC_VD_CORE_CFG_HVDRE(1U) : SPC_VD_CORE_CFG_HVDRE(0U); +#endif /* FSL_FEATURE_MCX_SPC_HAS_COREVDD_HVD */ + reg |= (config->option.LVDInterruptEnable) ? SPC_VD_CORE_CFG_LVDIE(1U) : SPC_VD_CORE_CFG_LVDIE(0U); + reg |= (config->option.LVDResetEnable) ? SPC_VD_CORE_CFG_LVDRE(1U) : SPC_VD_CORE_CFG_LVDRE(0U); + + base->VD_CORE_CFG = reg; +} + +#if (defined(FSL_FEATURE_MCX_SPC_HAS_COREVDD_HVD) && FSL_FEATURE_MCX_SPC_HAS_COREVDD_HVD) +/*! + * brief Enables the Core High Voltage Detector in Active mode. + * + * note If the CORE_LDO high voltage detect is enabled in Active mode, please note that the bandgap must be enabled + * and the drive strength of each regulator must not set to low. + * + * param base SPC peripheral base address. + * param enable Enable/Disable Core HVD. + * true - Enable Core High voltage detector in active mode. + * false - Disable Core High voltage detector in active mode. + * + * retval kStatus_Success Enable Core High Voltage Detect successfully. + */ +status_t SPC_EnableActiveModeCoreHighVoltageDetect(SPC_Type *base, bool enable) +{ + status_t status = kStatus_Success; + + if (enable) + { + base->ACTIVE_CFG |= SPC_ACTIVE_CFG_CORE_HVDE_MASK; + } + else + { + base->ACTIVE_CFG &= ~SPC_ACTIVE_CFG_CORE_HVDE_MASK; + } + + return status; +} + +/*! + * brief Enables the Core High Voltage Detector in Low Power mode. + * + * note If the CORE_LDO high voltage detect is enabled in Low Power mode, + * please note that the bandgap must be enabled and the drive strength of each regulator + * must not set to low in low power mode. + * + * param base SPC peripheral base address. + * param enable Enable/Disable Core HVD. + * true - Enable Core High voltage detector in low power mode. + * false - Disable Core High voltage detector in low power mode. + * + * retval kStatus_Success Enable Core High Voltage Detect in low power mode successfully. + */ +status_t SPC_EnableLowPowerModeCoreHighVoltageDetect(SPC_Type *base, bool enable) +{ + status_t status = kStatus_Success; + + if (enable) + { + base->LP_CFG |= SPC_LP_CFG_CORE_HVDE_MASK; + } + else + { + base->LP_CFG &= ~SPC_LP_CFG_CORE_HVDE_MASK; + } + + return status; +} +#endif /* FSL_FEATURE_MCX_SPC_HAS_COREVDD_HVD */ + +/*! + * brief Enables the Core VDD Low Voltage Detector in Active mode. + * + * note If the Core VDD high voltage detect is enabled in Active mode, please note that the bandgap must be enabled + * and the drive strength of each regulator must not set to low. + * + * param base SPC peripheral base address. + * param enable Enable/Disable Core LVD. + * true - Enable Core Low voltage detector in active mode. + * false - Disable Core Low voltage detector in active mode. + * + * retval kStatus_Success Enable Core Low Voltage Detect successfully. + */ +status_t SPC_EnableActiveModeCoreLowVoltageDetect(SPC_Type *base, bool enable) +{ + status_t status = kStatus_Success; + + if (enable) + { + base->ACTIVE_CFG |= SPC_ACTIVE_CFG_CORE_LVDE_MASK; + } + else + { + base->ACTIVE_CFG &= ~SPC_ACTIVE_CFG_CORE_LVDE_MASK; + } + + return status; +} + +/*! + * brief Enables the Core Low Voltage Detector in Low Power mode. + * + * note If the Core VDD low voltage detect is enabled in Low Power mode, please note that the bandgap must be enabled + * and the drive strength of each regulator must not set to low in Low Power mode. + * + * param base SPC peripheral base address. + * param enable Enable/Disable Core HVD. + * true - Enable Core Low voltage detector in low power mode. + * false - Disable Core Low voltage detector in low power mode. + * + * retval kStatus_Success Enable Core Low Voltage Detect in low power mode successfully. + */ +status_t SPC_EnableLowPowerModeCoreLowVoltageDetect(SPC_Type *base, bool enable) +{ + status_t status = kStatus_Success; + + if (enable) + { + base->LP_CFG |= SPC_LP_CFG_CORE_LVDE_MASK; + } + else + { + base->LP_CFG &= ~SPC_LP_CFG_CORE_LVDE_MASK; + } + + return status; +} + +/*! + * brief Set system VDD Low-voltage level selection. + * + * This function selects the system VDD low-voltage level. Changing system VDD low-voltage level + * must be done after disabling the System VDD low voltage reset and interrupt. + * + * @deprecated In latest RM, reserved for all devices, will removed in next release. + * + * param base SPC peripheral base address. + * param level System VDD Low-Voltage level selection. See @ref spc_low_voltage_level_select_t for details. + */ +void SPC_SetSystemVDDLowVoltageLevel(SPC_Type *base, spc_low_voltage_level_select_t level) +{ + (void)level; + (void)base; + + /* + uint32_t reg; + + reg = base->VD_SYS_CFG; + + base->VD_SYS_CFG &= ~(SPC_VD_SYS_CFG_LVDRE_MASK | SPC_VD_SYS_CFG_LVDIE_MASK); + reg |= SPC_VD_SYS_CFG_LVSEL(level); + + base->VD_SYS_CFG = reg; */ +} + +/*! + * brief Configs SYS VDD voltage detect options. + * + * This function config SYS voltage detect options. + * Note: Setting both the voltage detect interrupt and reset + * enable will cause interrupt to be generated on exit from reset. + * If those conditioned is not desired, interrupt/reset only one is enabled. + * + * param base SPC peripheral base address. + * param config Pointer to spc_system_voltage_detect_config_t structure. + */ +void SPC_SetSystemVoltageDetectConfig(SPC_Type *base, const spc_system_voltage_detect_config_t *config) +{ + assert(config != NULL); + + uint32_t reg = 0UL; + + reg |= (config->option.HVDInterruptEnable) ? SPC_VD_SYS_CFG_HVDIE(1U) : SPC_VD_SYS_CFG_HVDIE(0U); + reg |= (config->option.LVDInterruptEnable) ? SPC_VD_SYS_CFG_LVDIE(1U) : SPC_VD_SYS_CFG_LVDIE(0U); + reg |= (config->option.HVDResetEnable) ? SPC_VD_SYS_CFG_HVDRE(1U) : SPC_VD_SYS_CFG_HVDRE(0U); + reg |= (config->option.LVDResetEnable) ? SPC_VD_SYS_CFG_LVDRE(1U) : SPC_VD_SYS_CFG_LVDRE(0U); + + base->VD_SYS_CFG = reg; + + (void)(config->level); + /* SPC_SetSystemVDDLowVoltageLevel(base, config->level); */ +} + +/*! + * brief Enables the System VDD High Voltage Detector in Active mode. + * + * note If the System_LDO high voltage detect is enabled in Active mode, + * please note that the bandgap must be enabled and the drive strength of + * each regulator must not set to low in Active mode. + * + * param base SPC peripheral base address. + * param enable Enable/Disable System HVD. + * true - Enable System High voltage detector in active mode. + * false - Disable System High voltage detector in active mode. + * + * retval kStatus_Success Enable System High Voltage Detect successfully. + */ +status_t SPC_EnableActiveModeSystemHighVoltageDetect(SPC_Type *base, bool enable) +{ + status_t status = kStatus_Success; + + if (enable) + { + base->ACTIVE_CFG |= SPC_ACTIVE_CFG_SYS_HVDE_MASK; + } + else + { + base->ACTIVE_CFG &= ~SPC_ACTIVE_CFG_SYS_HVDE_MASK; + } + + return status; +} + +/*! + * brief Enables the System VDD Low Voltage Detector in Active mode. + * + * note If the System_LDO low voltage detect is enabled in Active mode, + * please note that the bandgap must be enabled and the drive strength of each + * regulator must not set to low in Active mode. + * + * param base SPC peripheral base address. + * param enable Enable/Disable System LVD. + * true - Enable System Low voltage detector in active mode. + * false - Disable System Low voltage detector in active mode. + * + * retval kStatus_Success Enable the System Low Voltage Detect successfully. + */ +status_t SPC_EnableActiveModeSystemLowVoltageDetect(SPC_Type *base, bool enable) +{ + status_t status = kStatus_Success; + + if (enable) + { + base->ACTIVE_CFG |= SPC_ACTIVE_CFG_SYS_LVDE_MASK; + } + else + { + base->ACTIVE_CFG &= ~SPC_ACTIVE_CFG_SYS_LVDE_MASK; + } + + return status; +} + +/*! + * brief Enables the System VDD High Voltage Detector in Low Power mode. + * + * note If the System_LDO high voltage detect is enabled in low power mode, + * please note that the bandgap must be enabled and the drive strength of each + * regulator must not set to low in low power mode. + * + * param base SPC peripheral base address. + * param enable Enable/Disable System HVD. + * true - Enable System High voltage detector in low power mode. + * false - Disable System High voltage detector in low power mode. + * + * retval kStatus_Success Enable System High Voltage Detect in low power mode successfully. + */ +status_t SPC_EnableLowPowerModeSystemHighVoltageDetect(SPC_Type *base, bool enable) +{ + status_t status = kStatus_Success; + + if (enable) + { + base->LP_CFG |= SPC_LP_CFG_SYS_HVDE_MASK; + } + else + { + base->LP_CFG &= ~SPC_LP_CFG_SYS_HVDE_MASK; + } + + return status; +} + +/*! + * brief Enables the System VDD Low Voltage Detector in Low Power mode. + * + * note If the System_LDO low voltage detect is enabled in Low Power mode, + * please note that the bandgap must be enabled and the drive strength of each + * regulator must not set to low in Low Power mode. + * + * param base SPC peripheral base address. + * param enable Enable/Disable System HVD. + * true - Enable System Low voltage detector in low power mode. + * false - Disable System Low voltage detector in low power mode. + * + * retval kStatus_Success Enable System Low Voltage Detect in low power mode successfully. + */ +status_t SPC_EnableLowPowerModeSystemLowVoltageDetect(SPC_Type *base, bool enable) +{ + status_t status = kStatus_Success; + + if (enable) + { + base->LP_CFG |= SPC_LP_CFG_SYS_LVDE_MASK; + } + else + { + base->LP_CFG &= ~SPC_LP_CFG_SYS_LVDE_MASK; + } + + return status; +} + +#if (defined(FSL_FEATURE_MCX_SPC_HAS_IOVDD_VD) && FSL_FEATURE_MCX_SPC_HAS_IOVDD_VD) +/*! + * brief Set IO VDD Low-Voltage level selection. + * + * This function selects the IO VDD Low-voltage level. Changing IO VDD low-voltage level + * must be done after disabling the IO VDD low voltage reset and interrupt. + * + * param base SPC peripheral base address. + * param level IO VDD Low-voltage level selection. + */ +void SPC_SetIOVDDLowVoltageLevel(SPC_Type *base, spc_low_voltage_level_select_t level) +{ + uint32_t reg; + + reg = base->VD_IO_CFG; + + base->VD_IO_CFG &= ~(SPC_VD_IO_CFG_LVDRE_MASK | SPC_VD_IO_CFG_LVDIE_MASK | SPC_VD_IO_CFG_LVSEL_MASK); + reg |= SPC_VD_IO_CFG_LVSEL(level); + + base->VD_IO_CFG = reg; +} + +/*! + * brief Configs IO VDD voltage detect options. + * + * This function config IO voltage detect options. + * Note: Setting both the voltage detect interrupt and reset + * enable will cause interrupt to be generated on exit from reset. + * If those conditioned is not desired, interrupt/reset so only one is enabled. + * + * param base SPC peripheral base address. + * param config Pointer to spc_IO_voltage_detect_config_t structure. + */ +void SPC_SetIOVoltageDetectConfig(SPC_Type *base, const spc_io_voltage_detect_config_t *config) +{ + assert(config != NULL); + + uint32_t reg = 0UL; + + /* Set trip voltage level. */ + SPC_SetIOVDDLowVoltageLevel(base, config->level); + + reg = base->VD_IO_CFG; + reg &= ~(SPC_VD_IO_CFG_LVDRE_MASK | SPC_VD_IO_CFG_LVDIE_MASK | SPC_VD_IO_CFG_HVDRE_MASK | SPC_VD_IO_CFG_HVDIE_MASK); + + reg |= (config->option.HVDInterruptEnable) ? SPC_VD_IO_CFG_HVDIE(1U) : SPC_VD_IO_CFG_HVDIE(0U); + reg |= (config->option.LVDInterruptEnable) ? SPC_VD_IO_CFG_LVDIE(1U) : SPC_VD_IO_CFG_LVDIE(0U); + reg |= (config->option.HVDResetEnable) ? SPC_VD_IO_CFG_HVDRE(1U) : SPC_VD_IO_CFG_HVDRE(0U); + reg |= (config->option.LVDResetEnable) ? SPC_VD_IO_CFG_LVDRE(1U) : SPC_VD_IO_CFG_LVDRE(0U); + + base->VD_IO_CFG = reg; +} + +/*! + * brief Enables the IO VDD High Voltage Detector in Active mode. + * + * note If the IO high voltage detect is enabled in Active mode, + * please note that the bandgap must be enabled and the drive strength + * of each regulator must not set to low in Active mode. + * + * param base SPC peripheral base address. + * param enable Enable/Disable IO HVD. + * true - Enable IO High voltage detector in active mode. + * false - Disable IO High voltage detector in active mode. + * + * retval kStatus_Success Enable IO High Voltage Detect successfully. + */ +status_t SPC_EnableActiveModeIOHighVoltageDetect(SPC_Type *base, bool enable) +{ + status_t status = kStatus_Success; + + if (enable) + { + base->ACTIVE_CFG |= SPC_ACTIVE_CFG_IO_HVDE_MASK; + } + else + { + base->ACTIVE_CFG &= ~SPC_ACTIVE_CFG_IO_HVDE_MASK; + } + + return status; +} + +/*! + * brief Enables the IO VDD Low Voltage Detector in Active mode. + * + * note If the IO low voltage detect is enabled in Active mode, + * please note that the bandgap must be enabled and the drive strength + * of each regulator must not set to low in Active mode. + * + * param base SPC peripheral base address. + * param enable Enable/Disable IO LVD. + * true - Enable IO Low voltage detector in active mode. + * false - Disable IO Low voltage detector in active mode. + * + * retval kStatus_Success Enable IO Low Voltage Detect successfully. + */ +status_t SPC_EnableActiveModeIOLowVoltageDetect(SPC_Type *base, bool enable) +{ + status_t status = kStatus_Success; + + if (enable) + { + base->ACTIVE_CFG |= SPC_ACTIVE_CFG_IO_LVDE_MASK; + } + else + { + base->ACTIVE_CFG &= ~SPC_ACTIVE_CFG_IO_LVDE_MASK; + } + + return status; +} + +/*! + * brief Enables the IO VDD High Voltage Detector in Low Power mode. + * + * note If the IO high voltage detect is enabled in Low Power mode, please note that the bandgap must be enabled + * and the drive strength of each regulator must not set to low in Low Power mode. + * + * param base SPC peripheral base address. + * param enable Enable/Disable IO HVD. + * true - Enable IO High voltage detector in low power mode. + * false - Disable IO High voltage detector in low power mode. + * + * retval kStatus_Success Enable IO High Voltage Detect in low power mode successfully. + */ +status_t SPC_EnableLowPowerModeIOHighVoltageDetect(SPC_Type *base, bool enable) +{ + status_t status = kStatus_Success; + + if (enable) + { + base->LP_CFG |= SPC_LP_CFG_IO_HVDE_MASK; + } + else + { + base->LP_CFG &= ~SPC_LP_CFG_IO_HVDE_MASK; + } + + return status; +} + +/*! + * brief Enables the IO VDD Low Voltage Detector in Low Power mode. + * + * note If the IO low voltage detect is enabled in Low Power mode, please note that the bandgap must be enabled + * and the drive strength of each regulator must not set to low in Low Power mode. + * + * param base SPC peripheral base address. + * param enable Enable/Disable IO HVD. + * true - Enable IO Low voltage detector in low power mode. + * false - Disable IO Low voltage detector in low power mode. + * + * retval kStatus_Success Enable IO Low Voltage Detect in low power mode successfully. + */ +status_t SPC_EnableLowPowerModeIOLowVoltageDetect(SPC_Type *base, bool enable) +{ + status_t status = kStatus_Success; + + if (enable) + { + base->LP_CFG |= SPC_LP_CFG_IO_LVDE_MASK; + } + else + { + base->LP_CFG &= ~SPC_LP_CFG_IO_LVDE_MASK; + } + + return status; +} +#endif /* FSL_FEATURE_MCX_SPC_HAS_IOVDD_VD */ + +/*! + * brief Configs external voltage domains + * + * This function configs external voltage domains isolation. + * + * param base SPC peripheral base address. + * param lowPowerIsoMask The mask of external domains isolate enable during low power mode. + * param IsoMask The mask of external domains isolate. + */ +void SPC_SetExternalVoltageDomainsConfig(SPC_Type *base, uint8_t lowPowerIsoMask, uint8_t IsoMask) +{ + uint32_t reg = 0UL; + + reg |= SPC_EVD_CFG_REG_EVDISO(IsoMask) | SPC_EVD_CFG_REG_EVDLPISO(lowPowerIsoMask); + base->EVD_CFG = reg; +} + +/*! + * brief Configs Core LDO Regulator in Active mode. + * + * @note The bandgap must be enabled before invoking this function. + * @note To set Core LDO as low drive strength, all HVDs/LVDs must be disabled previously. + * + * param base SPC peripheral base address. + * param option Pointer to the spc_active_mode_Core_LDO_option_t structure. + * + * retval kStatus_Success Config Core LDO regulator in Active power mode successful. + * retval kStatus_SPC_Busy The SPC instance is busy to execute any type of power mode transition. + * retval kStatus_SPC_BandgapModeWrong Bandgap should be enabled before invoking this function. + * retval kStatus_SPC_CORELDOLowDriveStrengthIgnore To set Core LDO as low drive strength, + * all LVDs/HVDs must be disabled before invoking this function. + */ +status_t SPC_SetActiveModeCoreLDORegulatorConfig(SPC_Type *base, const spc_active_mode_core_ldo_option_t *option) +{ + assert(option != NULL); + + if ((base->SC & SPC_SC_BUSY_MASK) != 0UL) + { + return kStatus_SPC_Busy; + } + + /* Check input parameters. */ + /* 1. Bandgap must not be disabled. */ + if (SPC_GetActiveModeBandgapMode(base) == kSPC_BandgapDisabled) + { + return kStatus_SPC_BandgapModeWrong; + } + + /* 2. To set to low drive strength, all LVDs/HVDs must be disabled previously. */ + if ((SPC_GetActiveModeVoltageDetectStatus(base) != 0UL) && + (option->CoreLDODriveStrength == kSPC_CoreLDO_LowDriveStrength)) + { + return kStatus_SPC_CORELDOLowDriveStrengthIgnore; + } + + if ((uint8_t)SPC_GetActiveModeCoreLDOVDDVoltageLevel(base) != (uint8_t)(option->CoreLDOVoltage)) + { +#if defined(FSL_FEATURE_SPC_HAS_CORELDO_VDD_DS) && FSL_FEATURE_SPC_HAS_CORELDO_VDD_DS + (void)SPC_SetActiveModeCoreLDORegulatorDriveStrength(base, kSPC_CoreLDO_NormalDriveStrength); +#endif /* FSL_FEATURE_SPC_HAS_CORELDO_VDD_DS */ + (void)SPC_SetActiveModeCoreLDORegulatorVoltageLevel(base, option->CoreLDOVoltage); + } + +#if defined(FSL_FEATURE_SPC_HAS_CORELDO_VDD_DS) && FSL_FEATURE_SPC_HAS_CORELDO_VDD_DS + (void)SPC_SetActiveModeCoreLDORegulatorDriveStrength(base, option->CoreLDODriveStrength); +#endif /* FSL_FEATURE_SPC_HAS_CORELDO_VDD_DS */ + + return kStatus_Success; +} + +/*! + * brief Set Core LDO VDD Regulator Voltage level in Active mode. + * + * @note In active mode, the Core LDO voltage level should only be changed when the + * Core LDO is in normal drive strength. + * + * @note Update Core LDO voltage level will set Busy flag, + * this function return only when busy flag is cleared by hardware + * + * param base SPC peripheral base address. + * param voltageLevel Specify the voltage level of CORE LDO Regulator in Active mode, please + refer to @ref spc_core_ldo_voltage_level_t. + * + * retval kStatus_SPC_CORELDOVoltageSetFail Core LDO voltage level should only be + * changed when the CORE_LDO is in normal drive strength. + * retval kStatus_Success Set Core LDO regulator voltage level in Active power mode successful. + */ +status_t SPC_SetActiveModeCoreLDORegulatorVoltageLevel(SPC_Type *base, spc_core_ldo_voltage_level_t voltageLevel) +{ + if ((uint8_t)voltageLevel != (uint8_t)SPC_GetActiveModeCoreLDOVDDVoltageLevel(base)) + { +#if (defined(FSL_FEATURE_SPC_HAS_CORELDO_VDD_DS) && FSL_FEATURE_SPC_HAS_CORELDO_VDD_DS) + if (SPC_GetActiveModeCoreLDODriveStrength(base) != kSPC_CoreLDO_NormalDriveStrength) + { + return kStatus_SPC_CORELDOVoltageSetFail; + } +#endif /* FSL_FEATURE_SPC_HAS_CORELDO_VDD_DS */ + + base->ACTIVE_CFG = + ((base->ACTIVE_CFG & ~SPC_ACTIVE_CFG_CORELDO_VDD_LVL_MASK) | SPC_ACTIVE_CFG_CORELDO_VDD_LVL(voltageLevel)); + + /* + * $Branch Coverage Justification$ + * $ref spc_c_ref_1$. + */ + while ((base->SC & SPC_SC_BUSY_MASK) != 0UL) + { + } + } + return kStatus_Success; +} + +#if defined(FSL_FEATURE_SPC_HAS_CORELDO_VDD_DS) && FSL_FEATURE_SPC_HAS_CORELDO_VDD_DS +/*! + * brief Set Core LDO VDD Regulator Drive Strength in Active mode. + * + * param base SPC peripheral base address. + * param driveStrength Specify the drive strength of CORE LDO Regulator in Active mode, please + refer to @ref spc_core_ldo_drive_strength_t. + * + * retval #kStatus_Success Set Core LDO regulator drive strength in Active power mode successful. + * retval #kStatus_SPC_CORELDOLowDriveStrengthIgnore If any voltage detect enabled, + core_ldo's drive strength can not set to low. + * retval #kStatus_SPC_BandgapModeWrong The selected bandgap mode is not allowed. + */ +status_t SPC_SetActiveModeCoreLDORegulatorDriveStrength(SPC_Type *base, spc_core_ldo_drive_strength_t driveStrength) +{ + if (driveStrength == kSPC_CoreLDO_LowDriveStrength) + { + /* If any voltage detect feature is enabled in Active mode, then CORE_LDO's drive strength must not set to low. + */ + if (SPC_GetActiveModeVoltageDetectStatus(base) != 0UL) + { + return kStatus_SPC_CORELDOLowDriveStrengthIgnore; + } + } + + if (driveStrength == kSPC_CoreLDO_NormalDriveStrength) + { + /* If specify normal drive strength, bandgap must not be disabled. */ + if (SPC_GetActiveModeBandgapMode(base) == kSPC_BandgapDisabled) + { + return kStatus_SPC_BandgapModeWrong; + } + } + + base->ACTIVE_CFG = + ((base->ACTIVE_CFG & ~SPC_ACTIVE_CFG_CORELDO_VDD_DS_MASK) | SPC_ACTIVE_CFG_CORELDO_VDD_DS(driveStrength)); + + return kStatus_Success; +} +#endif /* FSL_FEATURE_SPC_HAS_CORELDO_VDD_DS */ + +/*! + * brief Configs CORE LDO Regulator in low power mode + * + * This function configs CORE LDO Regulator in Low Power mode. + * If CORE LDO VDD Drive Strength is set to Normal, the CORE LDO VDD regulator voltage + * level in Active mode must be equal to the voltage level in Low power mode. And the Bandgap + * must be programmed to select bandgap enabled. + * Core VDD voltage levels for the Core LDO low power regulator can only be changed when the CORE + * LDO Drive Strength is set as Normal. + * + * param base SPC peripheral base address. + * param option Pointer to the spc_lowpower_mode_Core_LDO_option_t structure. + * retval kStatus_Success Config Core LDO regulator in power mode successfully. + * retval kStatus_SPC_Busy The SPC instance is busy to execute any type of power mode transition. + * retval kStatus_SPC_CORELDOLowDriveStrengthIgnore HVDs/LVDs are not disabled before invoking this function. + * retval kStatus_SPC_BandgapModeWrong The bandgap is not enabled before invoking this function. + */ +status_t SPC_SetLowPowerModeCoreLDORegulatorConfig(SPC_Type *base, const spc_lowpower_mode_core_ldo_option_t *option) +{ + status_t status = kStatus_Success; + + if ((base->SC & SPC_SC_BUSY_MASK) != 0UL) + { + /* + * $Line Coverage Justification$ + * $ref spc_c_ref_1$. + */ + return kStatus_SPC_Busy; + } + + status = SPC_SetLowPowerModeCoreLDORegulatorDriveStrength(base, option->CoreLDODriveStrength); + if (status == kStatus_Success) + { + (void)SPC_SetLowPowerModeCoreLDORegulatorVoltageLevel(base, option->CoreLDOVoltage); + } + + return status; +} + +/*! + * brief Set Core LDO VDD Regulator Voltage level in Low power mode. + * + * @note If Core LDO's drive strengths are same in active and low power mode, the Core LDO's voltage must be set to the + * same value in active and low power mode. Application should take care of this limitation. + * + * @note Some devices require Core LDO and DCDC have the same voltage level even if Core LDO is off. Application should + * take care of this limitation. + * + * param base SPC peripheral base address. + * param voltageLevel Voltage level of CORE LDO Regulator in Low power mode, please + refer to @ref spc_core_ldo_voltage_level_t. + * + * retval #kStatus_SPC_Busy The SPC instance is busy to execute other operation. + * retval #kStatus_Success Set Core LDO regulator voltage level in Low power mode successful. + */ +status_t SPC_SetLowPowerModeCoreLDORegulatorVoltageLevel(SPC_Type *base, spc_core_ldo_voltage_level_t voltageLevel) +{ + if ((base->SC & SPC_SC_BUSY_MASK) != 0UL) + { + /* + * $Line Coverage Justification$ + * $ref spc_c_ref_1$. + */ + return kStatus_SPC_Busy; + } + + base->LP_CFG = ((base->LP_CFG & ~SPC_LP_CFG_CORELDO_VDD_LVL_MASK) | SPC_LP_CFG_CORELDO_VDD_LVL(voltageLevel)); + + /* + * $Branch Coverage Justification$ + * $ref spc_c_ref_1$. + */ + while ((base->SC & SPC_SC_BUSY_MASK) != 0UL) + { + } + + return kStatus_Success; +} + +/*! + * brief Set Core LDO VDD Regulator Drive Strength in Low power mode. + * + * param base SPC peripheral base address. + * param driveStrength Specify drive strength of CORE LDO in low power mode. + * + * retval #kStatus_SPC_CORELDOLowDriveStrengthIgnore Some voltage detect enabled, CORE LDO's drive strength can not set + * as low. + * retval #kStatus_Success Set Core LDO regulator drive strength in Low power mode successful. + * retval #kStatus_SPC_BandgapModeWrong Bandgap is disabled when attempt to set CORE LDO work as normal drive strength. + */ +status_t SPC_SetLowPowerModeCoreLDORegulatorDriveStrength(SPC_Type *base, spc_core_ldo_drive_strength_t driveStrength) +{ + if (driveStrength == kSPC_CoreLDO_LowDriveStrength) + { + /* If any voltage detect feature is enabled in Low Power mode, then CORE_LDO's drive strength must not set to + * low. + */ + if (SPC_GetLowPowerModeVoltageDetectStatus(base) != 0UL) + { + return kStatus_SPC_CORELDOLowDriveStrengthIgnore; + } + } + else + { + /* To specify normal drive strength, the bandgap must be enabled in low power mode. */ + if (SPC_GetLowPowerModeBandgapMode(base) == kSPC_BandgapDisabled) + { + return kStatus_SPC_BandgapModeWrong; + } + } + + base->LP_CFG = ((base->LP_CFG & ~SPC_LP_CFG_CORELDO_VDD_DS_MASK) | SPC_LP_CFG_CORELDO_VDD_DS(driveStrength)); + + return kStatus_Success; +} + +#if (defined(FSL_FEATURE_MCX_SPC_HAS_SYS_LDO) && FSL_FEATURE_MCX_SPC_HAS_SYS_LDO) +/*! + * brief Configs System LDO VDD Regulator in Active mode. + * + * This function configs System LDO VDD Regulator in Active mode. + * If System LDO VDD Drive Strength is set to Normal, the Bandgap mode in Active mode must be programmed + * to a value that enable the bandgap. + * If any voltage detects are kept enabled, configuration to set System LDO VDD drive strength to low will + * be ignored. + * If select System LDO VDD Regulator voltage level to Over Drive Voltage, the Drive Strength of System LDO VDD + * Regulator must be set to Normal otherwise the regulator Drive Strength will be forced to Normal. + * If select System LDO VDD Regulator voltage level to Over Drive Voltage, the High voltage detect must be disabled. + * Otherwise it will be fail to regulator to Over Drive Voltage. + * + * param base SPC peripheral base address. + * param option Pointer to the spc_active_mode_Sys_LDO_option_t structure. + * retval kStatus_Success Config System LDO regulator in Active power mode successful. + * retval kStatus_SPC_Busy The SPC instance is busy to execute any type of power mode transition. + * retval kStatus_SPC_BandgapModeWrong The bandgap is not enabled before invoking this function. + * retval kStatus_SPC_SYSLDOOverDriveVoltageFail HVD of System VDD is not disable before setting to Over Drive voltage. + * retval kStatus_SPC_SYSLDOLowDriveStrengthIgnore Set System LDO VDD regulator's driver strength to Low will be + * ignored. + */ +status_t SPC_SetActiveModeSystemLDORegulatorConfig(SPC_Type *base, const spc_active_mode_sys_ldo_option_t *option) +{ + assert(option != NULL); + + if ((base->SC & SPC_SC_BUSY_MASK) != 0UL) + { + /* + * $Line Coverage Justification$ + * $ref spc_c_ref_1$. + */ + return kStatus_SPC_Busy; + } + + /* Check input parameters before setting registers. */ + /* 1. To set to low DS, all LVDs/HVDs must be disabled previously. */ + if ((SPC_GetActiveModeVoltageDetectStatus(base) != 0UL) && + (option->SysLDODriveStrength == kSPC_SysLDO_LowDriveStrength)) + { + return kStatus_SPC_SYSLDOLowDriveStrengthIgnore; + } + /* 2. If specify normal drive strength, bandgap must not be disabled. */ + if ((SPC_GetActiveModeBandgapMode(base) == kSPC_BandgapDisabled) && + (option->SysLDODriveStrength == kSPC_SysLDO_NormalDriveStrength)) + { + return kStatus_SPC_BandgapModeWrong; + } + + /* 3. Must disable system LDO high voltage detector before specifing overdrive voltage. */ + if ((option->SysLDOVoltage == kSPC_SysLDO_OverDriveVoltage) && + ((SPC_GetActiveModeVoltageDetectStatus(base) & SPC_ACTIVE_CFG_SYS_HVDE_MASK) != 0UL)) + { + return kStatus_SPC_SYSLDOOverDriveVoltageFail; + } + + (void)SPC_SetActiveModeSystemLDORegulatorDriveStrength(base, option->SysLDODriveStrength); + (void)SPC_SetActiveModeSystemLDORegulatorVoltageLevel(base, option->SysLDOVoltage); + + return kStatus_Success; +} + +/*! + * brief Set System LDO Regulator voltage level in Active mode. + * + * @note The system LDO regulator can only operate at the overdrive voltage level for a limited amount of time for the + * life of chip. + * + * param base SPC peripheral base address. + * param voltageLevel Specify the voltage level of System LDO Regulator in Active mode. + * + * retval #kStatus_Success Set System LDO Regulator voltage level in Active mode successfully. + * retval #kStatus_SPC_SYSLDOOverDriveVoltageFail Must disable system LDO high voltage detector before specifing + * overdrive voltage. + */ +status_t SPC_SetActiveModeSystemLDORegulatorVoltageLevel(SPC_Type *base, spc_sys_ldo_voltage_level_t voltageLevel) +{ + if (voltageLevel == kSPC_SysLDO_OverDriveVoltage) + { + /* Must disable system LDO high voltage detector before specifing overdrive voltage. */ + if ((SPC_GetActiveModeVoltageDetectStatus(base) & SPC_ACTIVE_CFG_SYS_HVDE_MASK) != 0UL) + { + return kStatus_SPC_SYSLDOOverDriveVoltageFail; + } + } + + base->ACTIVE_CFG = + (base->ACTIVE_CFG & ~SPC_ACTIVE_CFG_SYSLDO_VDD_LVL_MASK) | SPC_ACTIVE_CFG_SYSLDO_VDD_LVL(voltageLevel); + + return kStatus_Success; +} + +/*! + * brief Set System LDO Regulator Drive Strength in Active mode. + * + * param base SPC peripheral base address. + * param driveStrength Specify the drive strength of System LDO Regulator in Active mode. + * + * retval #kStatus_Success Set System LDO Regulator drive strength in Active mode successfully. + * retval #kStatus_SPC_SYSLDOLowDriveStrengthIgnore Attempt to specify low drive strength is ignored due to any + voltage detect feature is enabled in active mode. + * retval #kStatus_SPC_BandgapModeWrong Bandgap mode in Active mode must be programmed to a value that enables + the bandgap if attempt to specify normal drive strength. + */ +status_t SPC_SetActiveModeSystemLDORegulatorDriveStrength(SPC_Type *base, spc_sys_ldo_drive_strength_t driveStrength) +{ + if (driveStrength == kSPC_SysLDO_LowDriveStrength) + { + /* If enabled any LVDs or HVDs, SPC will ignore the attempt to specify low drive strength. */ + if (SPC_GetActiveModeVoltageDetectStatus(base) != 0UL) + { + return kStatus_SPC_SYSLDOLowDriveStrengthIgnore; + } + } + + if (driveStrength == kSPC_SysLDO_NormalDriveStrength) + { + /* If specify normal drive strength, bandgap must not be disabled. */ + if (SPC_GetActiveModeBandgapMode(base) == kSPC_BandgapDisabled) + { + return kStatus_SPC_BandgapModeWrong; + } + } + + base->ACTIVE_CFG = + (base->ACTIVE_CFG & ~SPC_ACTIVE_CFG_SYSLDO_VDD_DS_MASK) | SPC_ACTIVE_CFG_SYSLDO_VDD_DS(driveStrength); + + return kStatus_Success; +} + +/*! + * brief Configs System LDO regulator in low power modes. + * + * This function configs System LDO regulator in low power modes. + * If System LDO VDD Regulator Drive strength is set to normal, bandgap mode in low power + * mode must be programmed to a value that enables the Bandgap. + * If any High voltage detectors or Low Voltage detectors are kept enabled, configuration + * to set System LDO Regulator drive strength as Low will be ignored. + * + * param base SPC peripheral base address. + * param option Pointer to spc_lowpower_mode_Sys_LDO_option_t structure. + * + * retval kStatus_Success Config System LDO regulator in Low Power Mode successfully. + * retval kStatus_SPC_Busy The SPC instance is busy to execute any type of power mode transition. + * retval kStatus_SPC_BandgapModeWrong The bandgap mode setting in Low Power Mode is wrong. + * retval kStatus_SPC_SYSLDOLowDriveStrengthIgnore Set driver strength to low will be ignored. + */ +status_t SPC_SetLowPowerModeSystemLDORegulatorConfig(SPC_Type *base, const spc_lowpower_mode_sys_ldo_option_t *option) +{ + status_t status; + + if ((base->SC & SPC_SC_BUSY_MASK) != 0UL) + { + /* + * $Line Coverage Justification$ + * $ref spc_c_ref_1$. + */ + return kStatus_SPC_Busy; + } + + status = SPC_SetLowPowerModeSystemLDORegulatorDriveStrength(base, option->SysLDODriveStrength); + + return status; +} + +/*! + * brief Set System LDO Regulator drive strength in Low Power Mode. + * + * param base SPC peripheral base address. + * param driveStrength Specify the drive strength of System LDO Regulator in Low Power Mode. + * + * retval #kStatus_Success Set System LDO Regulator drive strength in Low Power Mode successfully. + * retval #kStatus_SPC_SYSLDOLowDriveStrengthIgnore Attempt to specify low drive strength is ignored due to any + voltage detect feature is enabled in low power mode. + * retval #kStatus_SPC_BandgapModeWrong Bandgap mode in low power mode must be programmed to a value that enables + the bandgap if attempt to specify normal drive strength. + */ +status_t SPC_SetLowPowerModeSystemLDORegulatorDriveStrength(SPC_Type *base, spc_sys_ldo_drive_strength_t driveStrength) +{ + if (driveStrength == kSPC_SysLDO_LowDriveStrength) + { + /* If enabled any LVDs or HVDs, SPC will ignore the attempt to specify low drive strength. */ + if (SPC_GetLowPowerModeVoltageDetectStatus(base) != 0UL) + { + return kStatus_SPC_SYSLDOLowDriveStrengthIgnore; + } + } + else + { + /* If specify normal drive strength, bandgap must not be disabled. */ + if (SPC_GetLowPowerModeBandgapMode(base) == kSPC_BandgapDisabled) + { + return kStatus_SPC_BandgapModeWrong; + } + } + + base->LP_CFG = (base->LP_CFG & ~SPC_LP_CFG_SYSLDO_VDD_DS_MASK) | SPC_LP_CFG_SYSLDO_VDD_DS(driveStrength); + + return kStatus_Success; +} +#endif /* FSL_FEATURE_MCX_SPC_HAS_SYS_LDO */ + +#if (defined(FSL_FEATURE_MCX_SPC_HAS_DCDC) && FSL_FEATURE_MCX_SPC_HAS_DCDC) +/*! + * brief Configs DCDC VDD Regulator in Active mode. + * + * note When changing the DCDC output voltage level, take care to change the CORE LDO voltage level. + * + * param base SPC peripheral base address. + * param option Pointer to the spc_active_mode_DCDC_option_t structure. + * + * retval kStatus_Success Config DCDC regulator in Active power mode successful. + * retval kStatus_SPC_Busy The SPC instance is busy to execute any type of power mode transition. + * retval kStatus_SPC_BandgapModeWrong The bandgap mode setting in Active mode is wrong. + */ +status_t SPC_SetActiveModeDCDCRegulatorConfig(SPC_Type *base, const spc_active_mode_dcdc_option_t *option) +{ + assert(option != NULL); + status_t status = kStatus_Success; + + if ((base->SC & SPC_SC_BUSY_MASK) != 0UL) + { + /* + * $Line Coverage Justification$ + * $ref spc_c_ref_1$. + */ + return kStatus_SPC_Busy; + } + + status = SPC_SetActiveModeDCDCRegulatorDriveStrength(base, option->DCDCDriveStrength); + + if (status == kStatus_Success) + { + SPC_SetActiveModeDCDCRegulatorVoltageLevel(base, option->DCDCVoltage); + } + + /* + * $Branch Coverage Justification$ + * $ref spc_c_ref_1$. + */ + while ((base->SC & SPC_SC_BUSY_MASK) != 0UL) + { + } + + return status; +} + +/*! + * brief Set DCDC VDD Regulator drive strength in Active mode. + * + * note To set DCDC drive strength as Normal, the bandgap must be enabled. + * + * param base SPC peripheral base address. + * param driveStrength Specify the DCDC VDD regulator drive strength, please refer to @ref spc_dcdc_drive_strength_t. + * + * retval #kStatus_Success Set DCDC VDD Regulator drive strength in Active mode successfully. + * retval #kStatus_SPC_BandgapModeWrong Set DCDC VDD Regulator drive strength to Normal, the Bandgap must be enabled. + */ +status_t SPC_SetActiveModeDCDCRegulatorDriveStrength(SPC_Type *base, spc_dcdc_drive_strength_t driveStrength) +{ + if (driveStrength == kSPC_DCDC_NormalDriveStrength) + { + /* If specify normal drive strength, bandgap must not be disabled. */ + if (SPC_GetActiveModeBandgapMode(base) == kSPC_BandgapDisabled) + { + return kStatus_SPC_BandgapModeWrong; + } + } + + base->ACTIVE_CFG = + ((base->ACTIVE_CFG) & (~SPC_ACTIVE_CFG_DCDC_VDD_DS_MASK)) | SPC_ACTIVE_CFG_DCDC_VDD_DS(driveStrength); + + return kStatus_Success; +} + +/*! + * brief Configs DCDC VDD Regulator in Low power modes. + * + * If DCDC VDD Drive Strength is set to Normal, the Bandgap mode in Low Power mode must be programmed + * to a value that enables the Bandgap. + * In Deep Power Down mode, DCDC regulator is always turned off. + * + * param base SPC peripheral base address. + * param option Pointer to the spc_lowpower_mode_DCDC_option_t structure. + * + * retval kStatus_Success Config DCDC regulator in low power mode successfully. + * retval kStatus_SPC_Busy The SPC instance is busy to execute any type of power mode transition. + * retval kStatus_SPC_BandgapModeWrong The bandgap should be enabled before invoking this function. + */ +status_t SPC_SetLowPowerModeDCDCRegulatorConfig(SPC_Type *base, const spc_lowpower_mode_dcdc_option_t *option) +{ + if ((base->SC & SPC_SC_BUSY_MASK) != 0UL) + { + /* + * $Line Coverage Justification$ + * $ref spc_c_ref_1$. + */ + return kStatus_SPC_Busy; + } + + /* Check input parameter before setting registers. */ + if ((option->DCDCDriveStrength == kSPC_DCDC_NormalDriveStrength) && + (SPC_GetLowPowerModeBandgapMode(base) == kSPC_BandgapDisabled)) + { + return kStatus_SPC_BandgapModeWrong; + } + + /* + 1. Configure to desired voltage level. + 2. Change to low drive strength. + 3. Configure same voltage level in active mode. + */ + SPC_SetLowPowerModeDCDCRegulatorVoltageLevel(base, option->DCDCVoltage); + + /* Change to desired drive strength. */ + if (option->DCDCDriveStrength != kSPC_DCDC_LowDriveStrength) + { + (void)SPC_SetLowPowerModeDCDCRegulatorDriveStrength(base, option->DCDCDriveStrength); + } + + /* + * $Branch Coverage Justification$ + * $ref spc_c_ref_1$. + */ + while ((base->SC & SPC_SC_BUSY_MASK) != 0UL) + { + } + + return kStatus_Success; +} + +/*! + * brief Set DCDC VDD Regulator drive strength in Low power mode. + * + * param base SPC peripheral base address. + * param driveStrength Specify the DCDC VDD Regulator drive strength, please refer to @ref spc_dcdc_drive_strength_t. + * + * retval #kStatus_Success Set DCDC VDD Regulator drive strength in Low power mode successfully. + * retval #kStatus_SPC_BandgapModeWrong Set DCDC VDD Regulator drive strength to Normal, the Bandgap must be enabled. + */ +status_t SPC_SetLowPowerModeDCDCRegulatorDriveStrength(SPC_Type *base, spc_dcdc_drive_strength_t driveStrength) +{ + if (driveStrength == kSPC_DCDC_NormalDriveStrength) + { + /* If specify normal drive strength, bandgap must not be disabled. */ + if (SPC_GetLowPowerModeBandgapMode(base) == kSPC_BandgapDisabled) + { + return kStatus_SPC_BandgapModeWrong; + } + } + + base->LP_CFG = ((base->LP_CFG) & (~SPC_LP_CFG_DCDC_VDD_DS_MASK)) | SPC_LP_CFG_DCDC_VDD_DS(driveStrength); + + return kStatus_Success; +} + +/*! + * brief Config DCDC Burst options + * + * param base SPC peripheral base address. + * param config Pointer to spc_DCDC_burst_config_t structure. + */ +void SPC_SetDCDCBurstConfig(SPC_Type *base, spc_dcdc_burst_config_t *config) +{ + assert(config != NULL); + uint32_t reg; + reg = base->DCDC_CFG; + reg &= ~(SPC_DCDC_CFG_FREQ_CNTRL_MASK | SPC_DCDC_CFG_FREQ_CNTRL_ON_MASK); + reg |= SPC_DCDC_CFG_FREQ_CNTRL(config->freq); + reg |= config->stabilizeBurstFreq ? SPC_DCDC_CFG_FREQ_CNTRL_ON(1U) : SPC_DCDC_CFG_FREQ_CNTRL_ON(0U); + base->DCDC_CFG = reg; + + /* Blocking until previous DCDC burst completed. */ + while ((base->DCDC_BURST_CFG & SPC_DCDC_BURST_CFG_BURST_ACK_MASK) == 0UL) + { + } + + if ((config->sofwareBurstRequest) || (config->externalBurstRequest)) + { + /* Clear DCDC burst acknowledge flag. */ + base->DCDC_BURST_CFG |= SPC_DCDC_BURST_CFG_BURST_ACK_MASK; + } + base->DCDC_BURST_CFG |= SPC_DCDC_BURST_CFG_EXT_BURST_EN(config->externalBurstRequest); + + if (config->sofwareBurstRequest) + { + base->DCDC_BURST_CFG |= SPC_DCDC_BURST_CFG_BURST_REQ_MASK; + } +} + +/*! + * brief Set the count value of the reference clock. + * + * This function set the count value of the reference clock to control the frequency + * of dcdc refresh when dcdc is configured in Pulse Refresh mode. + * + * param base SPC peripheral base address. + * param count The count value, 16 bit width. + */ +void SPC_SetDCDCRefreshCount(SPC_Type *base, uint16_t count) +{ + uint32_t reg; + + reg = base->DCDC_BURST_CFG; + reg &= ~SPC_DCDC_BURST_CFG_PULSE_REFRESH_CNT_MASK; + reg |= SPC_DCDC_BURST_CFG_PULSE_REFRESH_CNT(count); + + base->DCDC_BURST_CFG = reg; +} +#endif /* FSL_FEATURE_MCX_SPC_HAS_DCDC */ + +/*! + * brief Configs all settings of regulators in Active mode at a time. + * + * @note This function is used to overwrite all settings of regulators(including bandgap mode, regulators' + * drive strength and voltage level) in active mode at a time. + * + * @note Enable/disable LVDs/HVDs before invoking this function. + * + * @note This function will check input parameters based on hardware restrictions before setting registers, if input + * parameters do not satisfy hardware restrictions the specific error will be reported. + * + * + * @note Some hardware restrictions not covered, application should be aware of this and follow this hardware + * restrictions otherwise some unkown issue may occur: + * 1. If Core LDO's drive strength are set to same value in both Active mode and low power mode, + * the voltage level should also set to same value. + * 2. When switching Core LDO's drive strength from low to normal, ensure the LDO_CORE high voltage level is set + * to same level that was set prior to switching to the LDO_CORE drive strength. Otherwise, if the LVDs are + * enabled, an unexpected LVD can occur. + * + * @note If this function can not satisfy some tricky settings, please invoke other low-level functions. + * + * param base SPC peripheral base address. + * param config Pointer to spc_active_mode_regulators_config_t structure. + * retval kStatus_Success Config regulators in Active power mode successful. + * retval kStatus_SPC_BandgapModeWrong The bandgap mode setting in Active mode is wrong. + * retval kStatus_SPC_Busy The SPC instance is busy to execute any type of power mode transition. + * retval kStatus_SPC_CORELDOVoltageWrong The selected voltage level in active mode is not allowed. + * retval kStatus_SPC_SYSLDOOverDriveVoltageFail Fail to regulator to Over Drive Voltage. + * retval kStatus_SPC_SYSLDOLowDriveStrengthIgnore Set driver strength to Low will be ignored. + * retval kStatus_SPC_DCDCLowDriveStrengthIgnore Set driver strength to Low will be ignored. + */ +status_t SPC_SetActiveModeRegulatorsConfig(SPC_Type *base, const spc_active_mode_regulators_config_t *config) +{ + assert(config != NULL); + + uint32_t activeModeVDValue = SPC_GetActiveModeVoltageDetectStatus(base); + + /* Check input parameters */ + /* 1. Bandgap should not be disabled if any of regulator in normal drive strength or + if any of LVDs/HVDs are enabled or if VDD CORE glitch detect are enabled. */ + if ((config->bandgapMode == kSPC_BandgapDisabled) && + ((activeModeVDValue != 0UL) +#if !(defined(FSL_FEATURE_MCX_SPC_HAS_NO_GLITCH_DETECT) && FSL_FEATURE_MCX_SPC_HAS_NO_GLITCH_DETECT) + || (SPC_CheckActiveModeVddCoreGlitchDetectEnabled(base) == true) +#endif /* FSL_FEATURE_MCX_SPC_HAS_NO_GLITCH_DETECT */ +#if (defined(FSL_FEATURE_MCX_SPC_HAS_DCDC) && FSL_FEATURE_MCX_SPC_HAS_DCDC) + || (config->DCDCOption.DCDCDriveStrength == kSPC_DCDC_NormalDriveStrength) +#endif /* FSL_FEATURE_MCX_SPC_HAS_DCDC */ +#if (defined(FSL_FEATURE_MCX_SPC_HAS_SYS_LDO) && FSL_FEATURE_MCX_SPC_HAS_SYS_LDO) + || (config->SysLDOOption.SysLDODriveStrength == kSPC_SysLDO_NormalDriveStrength) +#endif /* FSL_FEATURE_MCX_SPC_HAS_SYS_LDO */ +#if (defined(FSL_FEATURE_SPC_HAS_CORELDO_VDD_DS) && FSL_FEATURE_SPC_HAS_CORELDO_VDD_DS) + || (config->CoreLDOOption.CoreLDODriveStrength == kSPC_CoreLDO_NormalDriveStrength) +#endif /* FSL_FEATURE_SPC_HAS_CORELDO_VDD_DS */ + )) + { + return kStatus_SPC_BandgapModeWrong; + } + +#if (defined(FSL_FEATURE_MCX_SPC_HAS_SYS_LDO) && FSL_FEATURE_MCX_SPC_HAS_SYS_LDO) + /* 2. Must disable system LDO high voltage detector before specifing SysLDO to overdrive voltage */ + if (((activeModeVDValue & SPC_ACTIVE_CFG_SYS_HVDE_MASK) != 0UL) && + (config->SysLDOOption.SysLDOVoltage == kSPC_SysLDO_OverDriveVoltage)) + { + return kStatus_SPC_SYSLDOOverDriveVoltageFail; + } +#endif /* FSL_FEATURE_MCX_SPC_HAS_SYS_LDO */ + +#if (defined(FSL_FEATURE_MCX_SPC_HAS_SYS_LDO) && FSL_FEATURE_MCX_SPC_HAS_SYS_LDO) + /* 3. To set System LDO's drive strength to low, all LVDs and HVDs must be disabled. */ + if ((activeModeVDValue != 0UL) && (config->SysLDOOption.SysLDODriveStrength == kSPC_SysLDO_LowDriveStrength)) + { + return kStatus_SPC_SYSLDOLowDriveStrengthIgnore; + } +#endif /* FSL_FEATURE_MCX_SPC_HAS_SYS_LDO */ + +#if (defined(FSL_FEATURE_SPC_HAS_CORELDO_VDD_DS) && FSL_FEATURE_SPC_HAS_CORELDO_VDD_DS) + /* 4. To set Core LDO's drive strength to low, all LVDs and HVDs must be disabled. */ + if ((activeModeVDValue != 0UL) && (config->CoreLDOOption.CoreLDODriveStrength == kSPC_CoreLDO_LowDriveStrength)) + { + return kStatus_SPC_CORELDOLowDriveStrengthIgnore; + } +#endif /* FSL_FEATURE_SPC_HAS_CORELDO_VDD_DS */ + +#if (defined(FSL_FEATURE_MCX_SPC_HAS_DCDC) && FSL_FEATURE_MCX_SPC_HAS_DCDC) + /* 5. Core LDO and DCDC should have same voltage level. */ + if ((uint8_t)config->DCDCOption.DCDCVoltage != (uint8_t)config->CoreLDOOption.CoreLDOVoltage) + { + return kStatus_SPC_CORELDOVoltageWrong; + } +#endif /* FSL_FEATURE_MCX_SPC_HAS_DCDC */ + + if ((base->SC & SPC_SC_BUSY_MASK) != 0UL) + { + return kStatus_SPC_Busy; + } + + base->ACTIVE_CFG = + ((base->ACTIVE_CFG) & ~(SPC_ACTIVE_CFG_BGMODE_MASK)) | SPC_ACTIVE_CFG_BGMODE(config->bandgapMode); +#if (defined(FSL_FEATURE_MCX_SPC_HAS_LPBUFF_EN_BIT) && FSL_FEATURE_MCX_SPC_HAS_LPBUFF_EN_BIT) + SPC_EnableActiveModeCMPBandgapBuffer(base, config->lpBuff); +#endif /* FSL_FEATURE_MCX_SPC_HAS_LPBUFF_EN_BIT */ + +#if (defined(FSL_FEATURE_MCX_SPC_HAS_SYS_LDO) && FSL_FEATURE_MCX_SPC_HAS_SYS_LDO) + (void)SPC_SetActiveModeSystemLDORegulatorConfig(base, &config->SysLDOOption); +#endif /* FSL_FEATURE_MCX_SPC_HAS_SYS_LDO */ + +#if (defined(FSL_FEATURE_MCX_SPC_HAS_DCDC) && FSL_FEATURE_MCX_SPC_HAS_DCDC) + (void)SPC_SetActiveModeDCDCRegulatorConfig(base, &config->DCDCOption); +#endif /* FSL_FEATURE_MCX_SPC_HAS_DCDC */ + + (void)SPC_SetActiveModeCoreLDORegulatorConfig(base, &config->CoreLDOOption); + + return kStatus_Success; +} + +/*! + * brief Configs regulators in Low Power mode. + * + * This function provides the method to config all on-chip regulators in Low Power mode. + * + * param base SPC peripheral base address. + * param config Pointer to spc_lowpower_mode_regulators_config_t structure. + * retval #kStatus_Success Config regulators in Low power mode successful. + * retval #kStatus_SPC_BandgapModeWrong The bandgap should not be disabled based on input settings. + * retval #kStatus_SPC_CORELDOLowDriveStrengthIgnore Set driver strength to low will be ignored. + * retval #kStatus_SPC_SYSLDOLowDriveStrengthIgnore Set driver strength to low will be ignored. + * retval #kStatus_SPC_CORELDOVoltageWrong Core LDO and System LDO do not have same voltage level. + */ +status_t SPC_SetLowPowerModeRegulatorsConfig(SPC_Type *base, const spc_lowpower_mode_regulators_config_t *config) +{ + assert(config != NULL); + uint32_t lpModeVDValue = SPC_GetLowPowerModeVoltageDetectStatus(base); + + /* Check input parameters */ + /* 1. Bandgap should not be disabled if any of regulator in normal drive strength or + if any of LVDs/HVDs are enabled or if VDD CORE glitch detect are enabled. */ + if ((config->bandgapMode == kSPC_BandgapDisabled) && + ((lpModeVDValue != 0UL) +#if !(defined(FSL_FEATURE_MCX_SPC_HAS_NO_GLITCH_DETECT) && FSL_FEATURE_MCX_SPC_HAS_NO_GLITCH_DETECT) + || (SPC_CheckLowPowerModeVddCoreGlitchDetectEnabled(base) == true) +#endif /* FSL_FEATURE_MCX_SPC_HAS_NO_GLITCH_DETECT */ +#if (defined(FSL_FEATURE_MCX_SPC_HAS_DCDC) && FSL_FEATURE_MCX_SPC_HAS_DCDC) + || (config->DCDCOption.DCDCDriveStrength == kSPC_DCDC_NormalDriveStrength) +#endif /* FSL_FEATURE_MCX_SPC_HAS_DCDC */ +#if (defined(FSL_FEATURE_MCX_SPC_HAS_SYS_LDO) && FSL_FEATURE_MCX_SPC_HAS_SYS_LDO) + || (config->SysLDOOption.SysLDODriveStrength == kSPC_SysLDO_NormalDriveStrength) +#endif /* FSL_FEATURE_MCX_SPC_HAS_SYS_LDO */ +#if (defined(FSL_FEATURE_SPC_HAS_CORELDO_VDD_DS) && FSL_FEATURE_SPC_HAS_CORELDO_VDD_DS) + || (config->CoreLDOOption.CoreLDODriveStrength == kSPC_CoreLDO_NormalDriveStrength) +#endif /* FSL_FEATURE_SPC_HAS_CORELDO_VDD_DS */ + )) + { + return kStatus_SPC_BandgapModeWrong; + } + +#if (defined(FSL_FEATURE_MCX_SPC_HAS_SYS_LDO) && FSL_FEATURE_MCX_SPC_HAS_SYS_LDO) + /* 2. To set System LDO's drive strength to low, all LVDs and HVDs must be disabled. */ + if ((lpModeVDValue != 0UL) && (config->SysLDOOption.SysLDODriveStrength == kSPC_SysLDO_LowDriveStrength)) + { + return kStatus_SPC_SYSLDOLowDriveStrengthIgnore; + } +#endif /* FSL_FEATURE_MCX_SPC_HAS_SYS_LDO */ + +#if (defined(FSL_FEATURE_SPC_HAS_CORELDO_VDD_DS) && FSL_FEATURE_SPC_HAS_CORELDO_VDD_DS) + /* 3. To set Core LDO's drive strength to low, all LVDs and HVDs must be disabled. */ + if ((lpModeVDValue != 0UL) && (config->CoreLDOOption.CoreLDODriveStrength == kSPC_CoreLDO_LowDriveStrength)) + { + return kStatus_SPC_CORELDOLowDriveStrengthIgnore; + } +#endif /* FSL_FEATURE_SPC_HAS_CORELDO_VDD_DS */ + +#if (defined(FSL_FEATURE_MCX_SPC_HAS_DCDC) && FSL_FEATURE_MCX_SPC_HAS_DCDC) + /* 5. Core LDO and DCDC should have same voltage level. */ + if ((uint8_t)config->DCDCOption.DCDCVoltage != (uint8_t)config->CoreLDOOption.CoreLDOVoltage) + { + return kStatus_SPC_CORELDOVoltageWrong; + } +#endif /* FSL_FEATURE_MCX_SPC_HAS_DCDC */ + base->LP_CFG = ((base->LP_CFG) & ~(SPC_LP_CFG_BGMODE_MASK)) | SPC_LP_CFG_BGMODE(config->bandgapMode); +#if (defined(FSL_FEATURE_MCX_SPC_HAS_LPBUFF_EN_BIT) && FSL_FEATURE_MCX_SPC_HAS_LPBUFF_EN_BIT) + SPC_EnableLowPowerModeCMPBandgapBuffer(base, config->lpBuff); +#endif /* FSL_FEATURE_MCX_SPC_HAS_LPBUFF_EN_BIT */ +#if (defined(FSL_FEATURE_MCX_SPC_HAS_COREVDD_IVS_EN_BIT) && FSL_FEATURE_MCX_SPC_HAS_COREVDD_IVS_EN_BIT) + SPC_EnableLowPowerModeCoreVDDInternalVoltageScaling(base, config->CoreIVS); +#endif /* FSL_FEATURE_MCX_SPC_HAS_COREVDD_IVS_EN_BIT */ + SPC_EnableLowPowerModeLowPowerIREF(base, config->lpIREF); + +#if (defined(FSL_FEATURE_MCX_SPC_HAS_SYS_LDO) && FSL_FEATURE_MCX_SPC_HAS_SYS_LDO) + (void)SPC_SetLowPowerModeSystemLDORegulatorConfig(base, &config->SysLDOOption); +#endif /* FSL_FEATURE_MCX_SPC_HAS_SYS_LDO */ + +#if (defined(FSL_FEATURE_MCX_SPC_HAS_DCDC) && FSL_FEATURE_MCX_SPC_HAS_DCDC) + (void)SPC_SetLowPowerModeDCDCRegulatorConfig(base, &config->DCDCOption); +#endif /* FSL_FEATURE_MCX_SPC_HAS_DCDC */ + + (void)SPC_SetLowPowerModeCoreLDORegulatorConfig(base, &config->CoreLDOOption); + + return kStatus_Success; +} diff --git a/hw/bsp/mcx/drivers/spc/fsl_spc.h b/hw/bsp/mcx/drivers/spc/fsl_spc.h new file mode 100644 index 000000000..52cb71c24 --- /dev/null +++ b/hw/bsp/mcx/drivers/spc/fsl_spc.h @@ -0,0 +1,2433 @@ +/* + * Copyright 2022-2024 NXP + * All rights reserved. + * + * SPDX-License-Identifier: BSD-3-Clause + */ + +#ifndef FSL_SPC_H_ +#define FSL_SPC_H_ +#include "fsl_common.h" + +/*! + * @addtogroup mcx_spc + * @{ + */ + +/******************************************************************************* + * Definitions + ******************************************************************************/ + +/*! @name Driver version */ +/*! @{ */ +/*! @brief SPC driver version 2.4.2. */ +#define FSL_SPC_DRIVER_VERSION (MAKE_VERSION(2, 4, 2)) +/*! @} */ + +#define SPC_EVD_CFG_REG_EVDISO_SHIFT 0UL +#define SPC_EVD_CFG_REG_EVDLPISO_SHIFT 8UL +#define SPC_EVD_CFG_REG_EVDSTAT_SHIFT 16UL + +#define SPC_EVD_CFG_REG_EVDISO(x) ((uint32_t)(x) << SPC_EVD_CFG_REG_EVDISO_SHIFT) +#define SPC_EVD_CFG_REG_EVDLPISO(x) ((uint32_t)(x) << SPC_EVD_CFG_REG_EVDLPISO_SHIFT) +#define SPC_EVD_CFG_REG_EVDSTAT(x) ((uint32_t)(x) << SPC_EVD_CFG_REG_EVDSTAT_SHIFT) + +#if (defined(SPC_GLITCH_DETECT_SC_CNT_SELECT_MASK)) +#define VDD_CORE_GLITCH_DETECT_SC GLITCH_DETECT_SC +#define SPC_VDD_CORE_GLITCH_DETECT_SC_GLITCH_DETECT_FLAG_MASK SPC_GLITCH_DETECT_SC_GLITCH_DETECT_FLAG_MASK +#define SPC_VDD_CORE_GLITCH_DETECT_SC_GLITCH_DETECT_FLAG SPC_GLITCH_DETECT_SC_GLITCH_DETECT_FLAG +#define SPC_VDD_CORE_GLITCH_DETECT_SC_LOCK_MASK SPC_GLITCH_DETECT_SC_LOCK_MASK +#define SPC_VDD_CORE_GLITCH_DETECT_SC_CNT_SELECT_MASK SPC_GLITCH_DETECT_SC_CNT_SELECT_MASK +#define SPC_VDD_CORE_GLITCH_DETECT_SC_CNT_SELECT SPC_GLITCH_DETECT_SC_CNT_SELECT +#define SPC_VDD_CORE_GLITCH_DETECT_SC_RE_MASK SPC_GLITCH_DETECT_SC_RE_MASK +#define SPC_VDD_CORE_GLITCH_DETECT_SC_RE SPC_GLITCH_DETECT_SC_RE +#define SPC_VDD_CORE_GLITCH_DETECT_SC_TIMEOUT_MASK SPC_GLITCH_DETECT_SC_TIMEOUT_MASK +#define SPC_VDD_CORE_GLITCH_DETECT_SC_TIMEOUT SPC_GLITCH_DETECT_SC_TIMEOUT +#define SPC_VDD_CORE_GLITCH_DETECT_SC_IE_MASK SPC_GLITCH_DETECT_SC_IE_MASK +#define SPC_VDD_CORE_GLITCH_DETECT_SC_IE SPC_GLITCH_DETECT_SC_IE +#endif + +/*! + * @brief SPC status enumeration. + * + * @note Some device(such as MCXA family) do not equip DCDC or System LDO, please refer to the reference manual + * to check. + */ +enum +{ + kStatus_SPC_Busy = MAKE_STATUS(kStatusGroup_SPC, 0U), /*!< The SPC instance is busy executing any + type of power mode transition. */ +#if (defined(FSL_FEATURE_MCX_SPC_HAS_DCDC) && FSL_FEATURE_MCX_SPC_HAS_DCDC) + kStatus_SPC_DCDCLowDriveStrengthIgnore = MAKE_STATUS(kStatusGroup_SPC, 1U), /*!< DCDC Low drive strength setting be + ignored for LVD/HVD enabled. */ + kStatus_SPC_DCDCPulseRefreshModeIgnore = MAKE_STATUS(kStatusGroup_SPC, 2U), /*!< DCDC Pulse Refresh Mode drive + strength setting be ignored for LVD/HVD enabled. */ +#endif /* FSL_FEATURE_MCX_SPC_HAS_DCDC */ +#if (defined(FSL_FEATURE_MCX_SPC_HAS_SYS_LDO) && FSL_FEATURE_MCX_SPC_HAS_SYS_LDO) + kStatus_SPC_SYSLDOOverDriveVoltageFail = MAKE_STATUS(kStatusGroup_SPC, 3U), /*!< SYS LDO regulate to Over drive + voltage failed for SYS LDO HVD must be disabled. */ + kStatus_SPC_SYSLDOLowDriveStrengthIgnore = MAKE_STATUS(kStatusGroup_SPC, 4U), /*!< SYS LDO Low driver strength + setting be ignored for LDO LVD/HVD enabled. */ +#endif /* FSL_FEATURE_MCX_SPC_HAS_SYS_LDO */ + kStatus_SPC_CORELDOLowDriveStrengthIgnore = MAKE_STATUS(kStatusGroup_SPC, 5U), /*!< CORE LDO Low driver strength + setting be ignored for LDO LVD/HVD enabled. */ + kStatus_SPC_CORELDOVoltageWrong = MAKE_STATUS(kStatusGroup_SPC, 7U), /*!< Core LDO voltage is wrong. */ + kStatus_SPC_CORELDOVoltageSetFail = MAKE_STATUS(kStatusGroup_SPC, 8U), /*!< Core LDO voltage set fail. */ + kStatus_SPC_BandgapModeWrong = MAKE_STATUS(kStatusGroup_SPC, 6U), /*!< Selected Bandgap Mode wrong. */ +}; + +/*! + * @brief Voltage Detect Status Flags. + */ +enum _spc_voltage_detect_flags +{ +#if (defined(FSL_FEATURE_MCX_SPC_HAS_IOVDD_VD) && FSL_FEATURE_MCX_SPC_HAS_IOVDD_VD) + kSPC_IOVDDHighVoltageDetectFlag = SPC_VD_STAT_IOVDD_HVDF_MASK, /*!< IO VDD High-Voltage detect flag. */ + kSPC_IOVDDLowVoltageDetectFlag = SPC_VD_STAT_IOVDD_LVDF_MASK, /*!< IO VDD Low-Voltage detect flag. */ +#endif /* FSL_FEATURE_MCX_SPC_HAS_IOVDD_VD */ + kSPC_SystemVDDHighVoltageDetectFlag = SPC_VD_STAT_SYSVDD_HVDF_MASK, /*!< System VDD High-Voltage detect flag. */ + kSPC_SystemVDDLowVoltageDetectFlag = SPC_VD_STAT_SYSVDD_LVDF_MASK, /*!< System VDD Low-Voltage detect flag. */ +#if (defined(FSL_FEATURE_MCX_SPC_HAS_COREVDD_HVD) && FSL_FEATURE_MCX_SPC_HAS_COREVDD_HVD) + kSPC_CoreVDDHighVoltageDetectFlag = SPC_VD_STAT_COREVDD_HVDF_MASK, /*!< Core VDD High-Voltage detect flag. */ +#endif /* FSL_FEATURE_MCX_SPC_HAS_COREVDD_HVD */ + kSPC_CoreVDDLowVoltageDetectFlag = SPC_VD_STAT_COREVDD_LVDF_MASK, /*!< Core VDD Low-Voltage detect flag. */ +}; + +/*! + * @brief SPC power domain isolation status. + * @note Some devices(such as MCXA family) do not contain WAKE Power Domain, please refer to the reference manual to + * check. + */ +enum _spc_power_domains +{ + kSPC_MAINPowerDomainRetain = 1UL << 16U, /*!< Peripherals and IO pads retain in MAIN Power Domain. */ + kSPC_WAKEPowerDomainRetain = 1UL << 17U, /*!< Peripherals and IO pads retain in WAKE Power Domain. */ +}; + +/*! + * @brief The enumeration of all analog module that can be controlled by SPC in active or low-power modes. + * @anchor spc_analog_module_control + */ +enum _spc_analog_module_control +{ + kSPC_controlVref = 1UL << 0UL, /*!< Enable/disable VREF in active or low-power modes. */ + kSPC_controlUsb3vDet = 1UL << 1UL, /*!< Enable/disable USB3V_Det in active or low-power modes. */ + kSPC_controlDac0 = 1UL << 4UL, /*!< Enable/disable DAC0 in active or low-power modes. */ + kSPC_controlDac1 = 1UL << 5UL, /*!< Enable/disable DAC1 in active or low-power modes. */ + kSPC_controlDac2 = 1UL << 6UL, /*!< Enable/disable DAC2 in active or low-power modes. */ + kSPC_controlOpamp0 = 1UL << 8UL, /*!< Enable/disable OPAMP0 in active or low-power modes. */ + kSPC_controlOpamp1 = 1UL << 9UL, /*!< Enable/disable OPAMP1 in active or low-power modes. */ + kSPC_controlOpamp2 = 1UL << 10UL, /*!< Enable/disable OPAMP2 in active or low-power modes. */ + kSPC_controlCmp0 = 1UL << 16UL, /*!< Enable/disable CMP0 in active or low-power modes. */ + kSPC_controlCmp1 = 1UL << 17UL, /*!< Enable/disable CMP1 in active or low-power modes. */ + kSPC_controlCmp2 = 1UL << 18UL, /*!< Enable/disable CMP2 in active or low-power modes. */ + kSPC_controlCmp0Dac = 1UL << 20UL, /*!< Enable/disable CMP0_DAC in active or low-power modes. */ + kSPC_controlCmp1Dac = 1UL << 21UL, /*!< Enable/disable CMP1_DAC in active or low-power modes. */ + kSPC_controlCmp2Dac = 1UL << 22UL, /*!< Enable/disable CMP2_DAC in active or low-power modes. */ + kSPC_controlAllModules = 0x770773UL, /*!< Enable/disable all modules in active or low-power modes. */ +}; + +/*! + * @brief The enumeration of spc power domain, the connected power domain is chip specfic, please refer to chip's RM + * for details. + */ +typedef enum _spc_power_domain_id +{ + kSPC_PowerDomain0 = 0U, /*!< Power domain0, the connected power domain is chip specific. */ + kSPC_PowerDomain1 = 1U, /*!< Power domain1, the connected power domain is chip specific. */ +} spc_power_domain_id_t; + +/*! + * @brief The enumeration of Power domain's low power mode. + */ +typedef enum _spc_power_domain_low_power_mode +{ + kSPC_SleepWithSYSClockRunning = 0U, /*!< Power domain request SLEEP mode with SYS clock running. */ + kSPC_DeepSleepWithSysClockOff = 1U, /*!< Power domain request deep sleep mode with system clock off. */ + kSPC_PowerDownWithSysClockOff = 2U, /*!< Power domain request power down mode with system clock off. */ + kSPC_DeepPowerDownWithSysClockOff = 4U, /*!< Power domain request deep power down mode with system clock off. */ +} spc_power_domain_low_power_mode_t; + +/*! + * @brief SPC low power request output pin polarity. + */ +typedef enum _spc_lowPower_request_pin_polarity +{ + kSPC_HighTruePolarity = 0x0U, /*!< Control the High Polarity of the Low Power Reqest Pin. */ + kSPC_LowTruePolarity = 0x1U, /*!< Control the Low Polarity of the Low Power Reqest Pin. */ +} spc_lowpower_request_pin_polarity_t; + +/*! + * @brief SPC low power request output override. + */ +typedef enum _spc_lowPower_request_output_override +{ + kSPC_LowPowerRequestNotForced = 0x0U, /*!< Not Forced. */ + kSPC_LowPowerRequestReserved = 0x1U, /*!< Reserved. */ + kSPC_LowPowerRequestForcedLow = 0x2U, /*!< Forced Low (Ignore LowPower request output polarity setting.) */ + kSPC_LowPowerRequestForcedHigh = 0x3U, /*!< Forced High (Ignore LowPower request output polarity setting.) */ +} spc_lowpower_request_output_override_t; + +/*! + * @brief SPC Bandgap mode enumeration in Active mode or Low Power mode. + */ +typedef enum _spc_bandgap_mode +{ + kSPC_BandgapDisabled = 0x0U, /*!< Bandgap disabled. */ + kSPC_BandgapEnabledBufferDisabled = 0x1U, /*!< Bandgap enabled with Buffer disabled. */ + kSPC_BandgapEnabledBufferEnabled = 0x2U, /*!< Bandgap enabled with Buffer enabled. */ + kSPC_BandgapReserved = 0x3U, /*!< Reserved. */ +} spc_bandgap_mode_t; + +#if (defined(FSL_FEATURE_MCX_SPC_HAS_DCDC) && FSL_FEATURE_MCX_SPC_HAS_DCDC) +/*! + * @brief DCDC regulator voltage level enumeration in Active mode or Low Power Mode. + * + * @note #kSPC_DCDC_RetentionVoltage not supported for all power modes. + */ +typedef enum _spc_dcdc_voltage_level +{ + kSPC_DCDC_RetentionVoltage = 0x0U, /*!< DCDC_CORE Regulator regulate to retention + Voltage(Only supportedin low power modes) */ + kSPC_DCDC_MidVoltage = 0x1U, /*!< DCDC_CORE Regulator regulate to Mid Voltage(1.0V). */ + kSPC_DCDC_NormalVoltage = 0x2U, /*!< DCDC_CORE Regulator regulate to Normal Voltage(1.1V). */ + kSPC_DCDC_OverdriveVoltage = 0x3U, /*!< DCDC_CORE Regulator regulate to Safe-Mode Voltage(1.2V). */ +} spc_dcdc_voltage_level_t; + +/*! + * @brief DCDC regulator Drive Strength enumeration in Active mode or Low Power Mode. + * + * @note Different drive strength differ in these DCDC characterstics: + * Maximum load current + * Quiescent current + * Transient response. + */ +typedef enum _spc_dcdc_drive_strength +{ + kSPC_DCDC_PulseRefreshMode = 0x0U, /*!< DCDC_CORE Regulator Drive Strength set to Pulse Refresh Mode, + * This enum member is only useful for Low Power Mode config, please + * note that pluse refresh mode is invalid in SLEEP mode. + */ + kSPC_DCDC_LowDriveStrength = 0x1U, /*!< DCDC_CORE regulator Drive Strength set to low. */ + kSPC_DCDC_NormalDriveStrength = 0x2U, /*!< DCDC_CORE regulator Drive Strength set to Normal. */ +} spc_dcdc_drive_strength_t; +#endif /* FSL_FEATURE_MCX_SPC_HAS_DCDC */ + +#if (defined(FSL_FEATURE_MCX_SPC_HAS_SYS_LDO) && FSL_FEATURE_MCX_SPC_HAS_SYS_LDO) +/*! + * @brief SYS LDO regulator voltage level enumeration in Active mode. + */ +typedef enum _spc_sys_ldo_voltage_level +{ + kSPC_SysLDO_NormalVoltage = 0x0U, /*!< SYS LDO VDD Regulator regulate to Normal Voltage(1.8V). */ + kSPC_SysLDO_OverDriveVoltage = 0x1U, /*!< SYS LDO VDD Regulator regulate to Over Drive Voltage(2.5V). */ +} spc_sys_ldo_voltage_level_t; + +/*! + * @brief SYS LDO regulator Drive Strength enumeration in Active mode or Low Power mode. + */ +typedef enum _spc_sys_ldo_drive_strength +{ + kSPC_SysLDO_LowDriveStrength = 0x0U, /*!< SYS LDO VDD regulator Drive Strength set to low. */ + kSPC_SysLDO_NormalDriveStrength = 0x1U, /*!< SYS LDO VDD regulator Drive Strength set to Normal. */ +} spc_sys_ldo_drive_strength_t; +#endif /* FSL_FEATURE_MCX_SPC_HAS_SYS_LDO */ + +/*! + * @brief Core LDO regulator voltage level enumeration in Active mode or Low Power mode. + */ +typedef enum _spc_core_ldo_voltage_level +{ + kSPC_CoreLDO_UnderDriveVoltage = 0x0U, /*!< @deprecated, to align with description of latest RM, please use + #kSPC_Core_LDO_RetentionVoltage as instead. */ + kSPC_Core_LDO_RetentionVoltage = 0x0U, /*!< Core LDO VDD regulator regulate to retention voltage, please note that + only useful in low power modes and not all devices support this options + please refer to devices' RM for details. */ + kSPC_CoreLDO_MidDriveVoltage = 0x1U, /*!< Core LDO VDD regulator regulate to Mid Drive Voltage. */ + kSPC_CoreLDO_NormalVoltage = 0x2U, /*!< Core LDO VDD regulator regulate to Normal Voltage. */ + kSPC_CoreLDO_OverDriveVoltage = 0x3U, /*!< Core LDO VDD regulator regulate to overdrive Voltage. */ +} spc_core_ldo_voltage_level_t; + +/*! + * @brief CORE LDO VDD regulator Drive Strength enumeration in Low Power mode. + */ +typedef enum _spc_core_ldo_drive_strength +{ + kSPC_CoreLDO_LowDriveStrength = 0x0U, /*!< Core LDO VDD regulator Drive Strength set to low. */ + kSPC_CoreLDO_NormalDriveStrength = 0x1U, /*!< Core LDO VDD regulator Drive Strength set to Normal. */ +} spc_core_ldo_drive_strength_t; + +/*! + * @brief IO VDD Low-Voltage Level Select. + */ +typedef enum _spc_low_voltage_level_select +{ + kSPC_LowVoltageNormalLevel = 0x0U, /*!< @deprecated, please use kSPC_LowVoltageHighRange as instead. */ + kSPC_LowVoltageSafeLevel = 0x1U, /*!< @deprecated, please use kSPC_LowVoltageLowRange as instead. */ + + kSPC_LowVoltageHighRange = 0x0U, /*!< High range LVD threshold. */ + kSPC_LowVoltageLowRange = 0x1U, /*!< Low range LVD threshold. */ +} spc_low_voltage_level_select_t; + +#if !(defined(FSL_FEATURE_MCX_SPC_HAS_NO_GLITCH_DETECT) && FSL_FEATURE_MCX_SPC_HAS_NO_GLITCH_DETECT) +/*! + * @brief Used to select output of 4-bit ripple counter is used to monitor a glitch on VDD core. + */ +typedef enum _spc_vdd_core_glitch_ripple_counter_select +{ + kSPC_selectBit0Of4bitRippleCounter = 0x0U, /*!< Select bit-0 of 4-bit Ripple Counter + to detect glitch on VDD Core. */ + kSPC_selectBit1Of4bitRippleCounter = 0x1U, /*!< Select bit-1 of 4-bit Ripple Counter + to detect glitch on VDD Core. */ + kSPC_selectBit2Of4bitRippleCounter = 0x2U, /*!< Select bit-2 of 4-bit Ripple Counter + to detect glitch on VDD Core. */ + kSPC_selectBit3Of4bitRippleCounter = 0x3U, /*!< Select bit-3 of 4-bit Ripple Counter + to detect glitch on VDD Core. */ +} spc_vdd_core_glitch_ripple_counter_select_t; +#endif + +/*! + * @brief The list of the operating voltage for the SRAM's read/write timing margin. + */ +typedef enum _spc_sram_operate_voltage +{ + kSPC_sramOperateAt1P0V = 0x1U, /*!< SRAM configured for 1.0V operation. */ + kSPC_sramOperateAt1P1V = 0x2U, /*!< SRAM configured for 1.1V operation. */ + kSPC_sramOperateAt1P2V = 0x3U, /*!< SRAM configured for 1.2V operation. */ +} spc_sram_operate_voltage_t; + +#if !(defined(FSL_FEATURE_MCX_SPC_HAS_NO_GLITCH_DETECT) && FSL_FEATURE_MCX_SPC_HAS_NO_GLITCH_DETECT) +/*! + * @brief The configuration of VDD Core glitch detector. + */ +typedef struct _spc_vdd_core_glitch_detector_config +{ + spc_vdd_core_glitch_ripple_counter_select_t rippleCounterSelect; /*!< Used to set ripple counter. */ + uint8_t resetTimeoutValue; /*!< The timeout value used to reset glitch detect/compare logic after an initial + glitch is detected. */ + bool enableReset; /*!< Used to enable/disable POR/LVD reset that caused by CORE VDD glitch detect error. */ + bool enableInterrupt; /*!< Used to enable/disable hardware interrupt if CORE VDD glitch detect error. */ +} spc_vdd_core_glitch_detector_config_t; +#endif + +typedef struct _spc_sram_voltage_config +{ + spc_sram_operate_voltage_t operateVoltage; /*!< Specifies the operating voltage for the SRAM's + read/write timing margin. */ + bool requestVoltageUpdate; /*!< Used to control whether request an SRAM trim value change. */ +} spc_sram_voltage_config_t; + +/*! + * @brief Low Power Request output pin configuration. + */ +typedef struct _spc_lowpower_request_config +{ + bool enable; /*!< Low Power Request Output enable. */ + spc_lowpower_request_pin_polarity_t polarity; /*!< Low Power Request Output pin polarity select. */ + spc_lowpower_request_output_override_t override; /*!< Low Power Request Output Override. */ +} spc_lowpower_request_config_t; + +/*! + * @brief Core LDO regulator options in Active mode. + */ +typedef struct _spc_active_mode_core_ldo_option +{ + spc_core_ldo_voltage_level_t CoreLDOVoltage; /*!< Core LDO Regulator Voltage Level selection in Active mode. */ +#if defined(FSL_FEATURE_SPC_HAS_CORELDO_VDD_DS) && FSL_FEATURE_SPC_HAS_CORELDO_VDD_DS + spc_core_ldo_drive_strength_t CoreLDODriveStrength; /*!< Core LDO Regulator Drive Strength + selection in Active mode */ +#endif /* FSL_FEATURE_SPC_HAS_CORELDO_VDD_DS */ +} spc_active_mode_core_ldo_option_t; + +#if (defined(FSL_FEATURE_MCX_SPC_HAS_SYS_LDO) && FSL_FEATURE_MCX_SPC_HAS_SYS_LDO) +/*! + * @brief System LDO regulator options in Active mode. + */ +typedef struct _spc_active_mode_sys_ldo_option +{ + spc_sys_ldo_voltage_level_t SysLDOVoltage; /*!< System LDO Regulator Voltage Level selection in Active mode. */ + spc_sys_ldo_drive_strength_t SysLDODriveStrength; /*!< System LDO Regulator Drive Strength + selection in Active mode. */ +} spc_active_mode_sys_ldo_option_t; +#endif /* FSL_FEATURE_MCX_SPC_HAS_SYS_LDO */ + +#if (defined(FSL_FEATURE_MCX_SPC_HAS_DCDC) && FSL_FEATURE_MCX_SPC_HAS_DCDC) +/*! + * @brief DCDC regulator options in Active mode. + */ +typedef struct _spc_active_mode_dcdc_option +{ + spc_dcdc_voltage_level_t DCDCVoltage; /*!< DCDC Regulator Voltage Level selection in Active mode. */ + spc_dcdc_drive_strength_t DCDCDriveStrength; /*!< DCDC_CORE Regulator Drive Strength selection in Active mode. */ +} spc_active_mode_dcdc_option_t; +#endif /* FSL_FEATURE_MCX_SPC_HAS_DCDC */ + +/*! + * @brief Core LDO regulator options in Low Power mode. + */ +typedef struct _spc_lowpower_mode_core_ldo_option +{ + spc_core_ldo_voltage_level_t CoreLDOVoltage; /*!< Core LDO Regulator Voltage Level selection in Low Power mode. */ + spc_core_ldo_drive_strength_t CoreLDODriveStrength; /*!< Core LDO Regulator Drive Strength + selection in Low Power mode */ +} spc_lowpower_mode_core_ldo_option_t; + +#if (defined(FSL_FEATURE_MCX_SPC_HAS_SYS_LDO) && FSL_FEATURE_MCX_SPC_HAS_SYS_LDO) +/*! + * @brief System LDO regulator options in Low Power mode. + */ +typedef struct _spc_lowpower_mode_sys_ldo_option +{ + spc_sys_ldo_drive_strength_t SysLDODriveStrength; /*!< System LDO Regulator Drive Strength + selection in Low Power mode. */ +} spc_lowpower_mode_sys_ldo_option_t; +#endif /* FSL_FEATURE_MCX_SPC_HAS_SYS_LDO */ + +#if (defined(FSL_FEATURE_MCX_SPC_HAS_DCDC) && FSL_FEATURE_MCX_SPC_HAS_DCDC) +/*! + * @brief DCDC regulator options in Low Power mode. + */ +typedef struct _spc_lowpower_mode_dcdc_option +{ + spc_dcdc_voltage_level_t DCDCVoltage; /*!< DCDC Regulator Voltage Level selection in Low Power mode. */ + spc_dcdc_drive_strength_t DCDCDriveStrength; /*!< DCDC_CORE Regulator Drive Strength selection in Low Power mode. */ +} spc_lowpower_mode_dcdc_option_t; + +/*! + * @brief DCDC Burst configuration. + * @deprecated Do not recommend to use this structure. + */ +typedef struct _spc_dcdc_burst_config +{ + bool sofwareBurstRequest; /*!< Enable/Disable DCDC Software Burst Request. */ + bool externalBurstRequest; /*!< Enable/Disable DCDC External Burst Request. */ + bool stabilizeBurstFreq; /*!< Enable/Disable DCDC frequency stabilization. */ + uint8_t freq; /*!< The frequency of the current burst. */ +} spc_dcdc_burst_config_t; +#endif /* FSL_FEATURE_MCX_SPC_HAS_DCDC */ + +/*! + * @brief CORE/SYS/IO VDD Voltage Detect options. + */ +typedef struct _spc_voltage_detect_option +{ + bool HVDInterruptEnable; /*!< CORE/SYS/IO VDD High Voltage Detect interrupt enable. */ + bool HVDResetEnable; /*!< CORE/SYS/IO VDD High Voltage Detect reset enable. */ + bool LVDInterruptEnable; /*!< CORE/SYS/IO VDD Low Voltage Detect interrupt enable. */ + bool LVDResetEnable; /*!< CORE/SYS/IO VDD Low Voltage Detect reset enable. */ +} spc_voltage_detect_option_t; + +/*! + * @brief Core Voltage Detect configuration. + */ +typedef struct _spc_core_voltage_detect_config +{ + spc_voltage_detect_option_t option; /*!< Core VDD Voltage Detect option. */ +} spc_core_voltage_detect_config_t; + +/*! + * @brief System Voltage Detect Configuration. + */ +typedef struct _spc_system_voltage_detect_config +{ + spc_voltage_detect_option_t option; /*!< System VDD Voltage Detect option. */ + spc_low_voltage_level_select_t level; /*!< @deprecated, reserved for all devices, will removed in next release. */ +} spc_system_voltage_detect_config_t; + +#if (defined(FSL_FEATURE_MCX_SPC_HAS_IOVDD_VD) && FSL_FEATURE_MCX_SPC_HAS_IOVDD_VD) +/*! + * @brief IO Voltage Detect Configuration. + */ +typedef struct _spc_io_voltage_detect_config +{ + spc_voltage_detect_option_t option; /*!< IO VDD Voltage Detect option. */ + spc_low_voltage_level_select_t level; /*!< IO VDD Low-voltage level selection. */ +} spc_io_voltage_detect_config_t; +#endif /* FSL_FEATURE_MCX_SPC_HAS_IOVDD_VD */ + +/*! + * @brief Active mode configuration. + */ +typedef struct _spc_active_mode_regulators_config +{ + spc_bandgap_mode_t bandgapMode; /*!< Specify bandgap mode in active mode. */ + +#if (defined(FSL_FEATURE_MCX_SPC_HAS_LPBUFF_EN_BIT) && FSL_FEATURE_MCX_SPC_HAS_LPBUFF_EN_BIT) + bool lpBuff; /*!< Enable/disable CMP bandgap buffer. */ +#endif /* FSL_FEATURE_MCX_SPC_HAS_LPBUFF_EN_BIT */ + +#if (defined(FSL_FEATURE_MCX_SPC_HAS_DCDC) && FSL_FEATURE_MCX_SPC_HAS_DCDC) + spc_active_mode_dcdc_option_t DCDCOption; /*!< Specify DCDC configurations in active mode. */ +#endif /* FSL_FEATURE_MCX_SPC_HAS_DCDC */ + +#if (defined(FSL_FEATURE_MCX_SPC_HAS_SYS_LDO) && FSL_FEATURE_MCX_SPC_HAS_SYS_LDO) + spc_active_mode_sys_ldo_option_t SysLDOOption; /*!< Specify System LDO configurations in active mode. */ +#endif /* FSL_FEATURE_MCX_SPC_HAS_SYS_LDO */ + + spc_active_mode_core_ldo_option_t CoreLDOOption; /*!< Specify Core LDO configurations in active mode. */ +} spc_active_mode_regulators_config_t; + +/*! + * @brief Low Power Mode configuration. + */ +typedef struct _spc_lowpower_mode_regulators_config +{ + bool lpIREF; /*!< Enable/disable low power IREF in low power modes. */ + spc_bandgap_mode_t bandgapMode; /*!< Specify bandgap mode in low power modes. */ + +#if (defined(FSL_FEATURE_MCX_SPC_HAS_LPBUFF_EN_BIT) && FSL_FEATURE_MCX_SPC_HAS_LPBUFF_EN_BIT) + bool lpBuff; /*!< Enable/disable CMP bandgap buffer in low power modes. */ +#endif /* FSL_FEATURE_MCX_SPC_HAS_LPBUFF_EN_BIT */ + +#if (defined(FSL_FEATURE_MCX_SPC_HAS_COREVDD_IVS_EN_BIT) && FSL_FEATURE_MCX_SPC_HAS_COREVDD_IVS_EN_BIT) + bool CoreIVS; /*!< Enable/disable CORE VDD internal voltage scaling. */ +#endif /* FSL_FEATURE_MCX_SPC_HAS_COREVDD_IVS_EN_BIT */ + +#if (defined(FSL_FEATURE_MCX_SPC_HAS_DCDC) && FSL_FEATURE_MCX_SPC_HAS_DCDC) + spc_lowpower_mode_dcdc_option_t DCDCOption; /*!< Specify DCDC configurations in low power modes. */ +#endif /* FSL_FEATURE_MCX_SPC_HAS_DCDC */ + +#if (defined(FSL_FEATURE_MCX_SPC_HAS_SYS_LDO) && FSL_FEATURE_MCX_SPC_HAS_SYS_LDO) + spc_lowpower_mode_sys_ldo_option_t SysLDOOption; /*!< Specify system LDO configurations in low power modes. */ +#endif /* FSL_FEATURE_MCX_SPC_HAS_SYS_LDO */ + + spc_lowpower_mode_core_ldo_option_t CoreLDOOption; /*!< Specify core LDO configurations in low power modes. */ +} spc_lowpower_mode_regulators_config_t; + +/******************************************************************************* + * API + ******************************************************************************/ +#if defined(__cplusplus) +extern "C" { +#endif /* __cplusplus */ + +/*! + * @name SPC Status + * @{ + */ +/*! + * @brief Gets Isolation status for each power domains. + * + * This function gets the status which indicates whether certain + * peripheral and the IO pads are in a latched state as a result + * of having been in POWERDOWN mode. + * + * @param base SPC peripheral base address. + * @return Current isolation status for each power domains. See @ref _spc_power_domains for details. + */ +uint8_t SPC_GetPeriphIOIsolationStatus(SPC_Type *base); + +/*! + * @brief Clears peripherals and I/O pads isolation flags for each power domains. + * + * This function clears peripherals and I/O pads isolation flags for each power domains. + * After recovering from the POWERDOWN mode, user must invoke this function to release the + * I/O pads and certain peripherals to their normal run mode state. Before invoking this + * function, user must restore chip configuration in particular pin configuration for enabled + * WUU wakeup pins. + * + * @param base SPC peripheral base address. + */ +static inline void SPC_ClearPeriphIOIsolationFlag(SPC_Type *base) +{ + base->SC |= SPC_SC_ISO_CLR_MASK; +} + +/*! + * @brief Gets SPC busy status flag. + * + * This function gets SPC busy status flag. When SPC executing any type of power mode + * transition in ACTIVE mode or any of the SOC low power mode, the SPC busy status flag is set + * and this function returns true. When changing CORE LDO voltage level and DCDC voltage level + * in ACTIVE mode, the SPC busy status flag is set and this function return true. + * + * @param base SPC peripheral base address. + * @return Ack busy flag. + * true - SPC is busy. + * false - SPC is not busy. + */ +static inline bool SPC_GetBusyStatusFlag(SPC_Type *base) +{ + return ((base->SC & SPC_SC_BUSY_MASK) != 0UL); +} + +/*! + * @brief Checks system low power request. + * + * @note Only when all power domains request low power mode entry, the result of this function is true. That means when + * all power domains request low power mode entry, the SPC regulators will be controlled by LP_CFG register. + * + * @param base SPC peripheral base address. + * @return The system low power request check result. + * - \b true All power domains have requested low power mode and SPC has entered a low power state and power mode + * configuration are based on the LP_CFG configuration register. + * - \b false SPC in active mode and ACTIVE_CFG register control system power supply. + */ +static inline bool SPC_CheckLowPowerReqest(SPC_Type *base) +{ + return ((base->SC & SPC_SC_SPC_LP_REQ_MASK) == SPC_SC_SPC_LP_REQ_MASK); +} + +/*! + * @brief Clears system low power request, set SPC in active mode. + * + * @param base SPC peripheral base address. + */ +static inline void SPC_ClearLowPowerRequest(SPC_Type *base) +{ + base->SC |= SPC_SC_SPC_LP_REQ_MASK; +} + +#if (defined(FSL_FEATURE_MCX_SPC_HAS_SWITCH_STATE_BIT) && FSL_FEATURE_MCX_SPC_HAS_SWITCH_STATE_BIT) +/*! + * @brief Checks whether the power switch is on. + * + * @param base SPC peripheral base address. + * + * @retval true The power switch is on. + * @retval false The power switch is off. + */ +static inline bool SPC_CheckSwitchState(SPC_Type *base) +{ + return ((base->SC & SPC_SC_SWITCH_STATE_MASK) != 0UL); +} +#endif /* FSL_FEATURE_MCX_SPC_HAS_SWITCH_STATE_BIT */ + +/*! + * @brief Gets selected power domain's requested low power mode. + * + * @param base SPC peripheral base address. + * @param powerDomainId Power Domain Id, please refer to @ref spc_power_domain_id_t. + * + * @return The selected power domain's requested low power mode, please refer to @ref spc_power_domain_low_power_mode_t. + */ +spc_power_domain_low_power_mode_t SPC_GetPowerDomainLowPowerMode(SPC_Type *base, spc_power_domain_id_t powerDomainId); + +/*! + * @brief Checks power domain's low power request. + * + * @param base SPC peripheral base address. + * @param powerDomainId Power Domain Id, please refer to @ref spc_power_domain_id_t. + * @return The result of power domain's low power request. + * - \b true The selected power domain requests low power mode entry. + * - \b false The selected power domain does not request low power mode entry. + */ +static inline bool SPC_CheckPowerDomainLowPowerRequest(SPC_Type *base, spc_power_domain_id_t powerDomainId) +{ + assert((uint8_t)powerDomainId < SPC_PD_STATUS_COUNT); + return ((base->PD_STATUS[(uint8_t)powerDomainId] & SPC_PD_STATUS_PWR_REQ_STATUS_MASK) == + SPC_PD_STATUS_PWR_REQ_STATUS_MASK); +} + +/*! + * @brief Clears selected power domain's low power request flag. + * + * @param base SPC peripheral base address. + * @param powerDomainId Power Domain Id, please refer to @ref spc_power_domain_id_t. + */ +static inline void SPC_ClearPowerDomainLowPowerRequestFlag(SPC_Type *base, spc_power_domain_id_t powerDomainId) +{ + assert((uint8_t)powerDomainId < SPC_PD_STATUS_COUNT); + base->PD_STATUS[(uint8_t)powerDomainId] |= SPC_PD_STATUS_PD_LP_REQ_MASK; +} + +/*! @} */ + +#if (defined(FSL_FEATURE_MCX_SPC_HAS_SRAMRETLDO_REG) && FSL_FEATURE_MCX_SPC_HAS_SRAMRETLDO_REG) +/*! + * @name SRAM Retention LDO Control APIs + * @{ + */ + +/*! + * @brief Trims SRAM retention regulator reference voltage, trim step is 12 mV, range is around 0.48V to 0.85V. + * + * @param base SPC peripheral base address. + * @param trimValue Reference voltage trim value. + */ +static inline void SPC_TrimSRAMLdoRefVoltage(SPC_Type *base, uint8_t trimValue) +{ + base->SRAMRETLDO_REFTRIM = + ((base->SRAMRETLDO_REFTRIM & ~SPC_SRAMRETLDO_REFTRIM_REFTRIM_MASK) | SPC_SRAMRETLDO_REFTRIM_REFTRIM(trimValue)); +} + +/*! + * @brief Enables/disables SRAM retention LDO. + * + * @param base SPC peripheral base address. + * @param enable Used to enable/disable SRAM LDO : + * - \b true Enable SRAM LDO; + * - \b false Disable SRAM LDO. + */ +static inline void SPC_EnableSRAMLdo(SPC_Type *base, bool enable) +{ + if (enable) + { + base->SRAMRETLDO_CNTRL |= SPC_SRAMRETLDO_CNTRL_SRAMLDO_ON_MASK; + } + else + { + base->SRAMRETLDO_CNTRL &= ~SPC_SRAMRETLDO_CNTRL_SRAMLDO_ON_MASK; + } +} + +/*! + * @brief + * + * @todo Need to check. + * + * @param base SPC peripheral base address. + * @param mask The OR'ed value of SRAM Array. + */ +static inline void SPC_RetainSRAMArray(SPC_Type *base, uint8_t mask) +{ + base->SRAMRETLDO_CNTRL |= SPC_SRAMRETLDO_CNTRL_SRAM_RET_EN(mask); +} + +/*! @} */ +#endif /* FSL_FEATURE_MCX_SPC_HAS_SRAMRETLDO_REG */ + +/*! + * @name Low Power Request configuration + * @{ + */ +/*! + * @brief Configs Low power request output pin. + * + * This function config the low power request output pin + * + * @param base SPC peripheral base address. + * @param config Pointer the @ref spc_lowpower_request_config_t structure. + */ +void SPC_SetLowPowerRequestConfig(SPC_Type *base, const spc_lowpower_request_config_t *config); + +/*! @} */ + +#if (defined(FSL_FEATURE_MCX_SPC_HAS_CFG_REG) && FSL_FEATURE_MCX_SPC_HAS_CFG_REG) +/*! + * @name Integrated Power Switch Control APIs + * @{ + */ + +/*! + * @brief Enables/disables the integrated power switch manually. + * + * @param base SPC peripheral base address. + * @param enable Used to enable/disable the integrated power switch: + * - \b true Enable the integrated power switch; + * - \b false Disable the integrated power switch. + */ +static inline void SPC_EnableIntegratedPowerSwitchManually(SPC_Type *base, bool enable) +{ + if (enable) + { + base->CFG |= (SPC_CFG_INTG_PWSWTCH_SLEEP_ACTIVE_EN_MASK | SPC_CFG_INTG_PWSWTCH_WKUP_ACTIVE_EN_MASK); + } + else + { + base->CFG &= ~(SPC_CFG_INTG_PWSWTCH_SLEEP_ACTIVE_EN_MASK | SPC_CFG_INTG_PWSWTCH_WKUP_ACTIVE_EN_MASK); + } +} + +/*! + * @brief Enables/disables the integrated power switch automatically. + * + * To gate the integrated power switch when chip enter low power modes, and ungate the switch after wake-up from low + * power modes: + * @code + * SPC_EnableIntegratedPowerSwitchAutomatically(SPC, true, true); + * @endcode + * + * @param base SPC peripheral base address. + * @param sleepGate Enable the integrated power switch when chip enter low power modes: + * - \b true SPC asserts an output pin at low-power entry to power-gate the switch; + * - \b false SPC does not assert an output pin at low-power entry to power-gate the switch. + * @param wakeupUngate Enables the switch after wake-up from low power modes: + * - \b true SPC asserts an output pin at low-power exit to power-ungate the switch; + * - \b false SPC does not assert an output pin at low-power exit to power-ungate the switch. + */ +static inline void SPC_EnableIntegratedPowerSwitchAutomatically(SPC_Type *base, bool sleepGate, bool wakeupUngate) +{ + uint32_t tmp32 = ((base->CFG) & ~(SPC_CFG_INTG_PWSWTCH_SLEEP_EN_MASK | SPC_CFG_INTG_PWSWTCH_WKUP_EN_MASK)); + + tmp32 |= SPC_CFG_INTG_PWSWTCH_SLEEP_EN(sleepGate) | SPC_CFG_INTG_PWSWTCH_WKUP_EN(wakeupUngate); + + base->CFG = tmp32; +} + +/*! @} */ +#endif /* FSL_FEATURE_MCX_SPC_HAS_CFG_REG */ + +#if !(defined(FSL_FEATURE_MCX_SPC_HAS_NO_GLITCH_DETECT) && FSL_FEATURE_MCX_SPC_HAS_NO_GLITCH_DETECT) +/*! + * @name VDD Core Glitch Detector Control APIs + * @{ + */ + +/*! + * @brief Configures VDD Core Glitch detector, including ripple counter selection, timeout value and so on. + * + * @param base SPC peripheral base address. + * @param config Pointer to the structure in type of @ref spc_vdd_core_glitch_detector_config_t. + */ +void SPC_ConfigVddCoreGlitchDetector(SPC_Type *base, const spc_vdd_core_glitch_detector_config_t *config); + +/*! + * @brief Checks selected 4-bit glitch ripple counter's output. + * + * @param base SPC peripheral base address. + * @param rippleCounter The ripple counter to check, please refer to @ref spc_vdd_core_glitch_ripple_counter_select_t. + * + * @retval true The selected ripple counter output is 1, will generate interrupt or reset based on settings. + * @retval false The selected ripple counter output is 0. + */ + +static inline bool SPC_CheckGlitchRippleCounterOutput(SPC_Type *base, + spc_vdd_core_glitch_ripple_counter_select_t rippleCounter) +{ + return ((base->VDD_CORE_GLITCH_DETECT_SC & SPC_VDD_CORE_GLITCH_DETECT_SC_GLITCH_DETECT_FLAG_MASK) == + SPC_VDD_CORE_GLITCH_DETECT_SC_GLITCH_DETECT_FLAG(1UL << (uint32_t)(rippleCounter))); +} + +/*! + * @brief Clears output of selected glitch ripple counter. + * + * @param base SPC peripheral base address. + * @param rippleCounter The ripple counter to check, please refer to @ref spc_vdd_core_glitch_ripple_counter_select_t. + */ +static inline void SPC_ClearGlitchRippleCounterOutput(SPC_Type *base, + spc_vdd_core_glitch_ripple_counter_select_t rippleCounter) +{ + base->VDD_CORE_GLITCH_DETECT_SC |= + SPC_VDD_CORE_GLITCH_DETECT_SC_GLITCH_DETECT_FLAG(1UL << (uint32_t)(rippleCounter)); +} + +/*! + * @brief After invoking this function, writes to SPC_VDD_CORE_GLITCH_DETECT_SC[RE] register are ignored. + * + * @param base SPC peripheral base address. + */ +static inline void SPC_LockVddCoreVoltageGlitchDetectResetControl(SPC_Type *base) +{ + base->VDD_CORE_GLITCH_DETECT_SC |= SPC_VDD_CORE_GLITCH_DETECT_SC_LOCK_MASK; +} + +/*! + * @brief After invoking this function, writes to SPC_VDD_CORE_GLITCH_DETECT_SC[RE] register are allowed. + * + * @param base SPC peripheral base address. + */ +static inline void SPC_UnlockVddCoreVoltageGlitchDetectResetControl(SPC_Type *base) +{ + base->VDD_CORE_GLITCH_DETECT_SC &= ~SPC_VDD_CORE_GLITCH_DETECT_SC_LOCK_MASK; +} + +/*! + * @brief Checks if SPC_VDD_CORE_GLITCH_DETECT_SC[RE] register is writable. + * + * @param base SPC peripheral base address. + * + * @retval true SPC_VDD_CORE_GLITCH_DETECT_SC[RE] register is writable. + * @retval false SPC_VDD_CORE_GLITCH_DETECT_SC[RE] register is not writable. + */ +static inline bool SPC_CheckVddCoreVoltageGlitchResetControlState(SPC_Type *base) +{ + return ((base->VDD_CORE_GLITCH_DETECT_SC & SPC_VDD_CORE_GLITCH_DETECT_SC_LOCK_MASK) != 0UL); +} + +/*! @} */ +#endif + +/*! + * @name SRAM Control APIs + * @{ + */ + +/*! + * @brief Set SRAM operate voltage. + * + * @param base SPC peripheral base address. + * @param config The pointer to @ref spc_sram_voltage_config_t, specifies the configuration of sram voltage. + */ +void SPC_SetSRAMOperateVoltage(SPC_Type *base, const spc_sram_voltage_config_t *config); + +/*! @} */ + +/*! + * @name Active Mode configuration + * @{ + */ + +/*! + * @brief Gets the Bandgap mode in Active mode. + * + * @param base SPC peripheral base address. + * @return Bandgap mode in the type of @ref spc_bandgap_mode_t enumeration. + */ +static inline spc_bandgap_mode_t SPC_GetActiveModeBandgapMode(SPC_Type *base) +{ + return (spc_bandgap_mode_t)(uint32_t)((base->ACTIVE_CFG & SPC_ACTIVE_CFG_BGMODE_MASK) >> + SPC_ACTIVE_CFG_BGMODE_SHIFT); +} + +/*! + * @brief Gets all voltage detectors status in Active mode. + * + * @param base SPC peripheral base address. + * @return All voltage detectors status in Active mode. + */ +static inline uint32_t SPC_GetActiveModeVoltageDetectStatus(SPC_Type *base) +{ + uint32_t state; + state = base->ACTIVE_CFG & + ( +#if (defined(FSL_FEATURE_MCX_SPC_HAS_IOVDD_VD) && FSL_FEATURE_MCX_SPC_HAS_IOVDD_VD) + SPC_ACTIVE_CFG_IO_HVDE_MASK | SPC_ACTIVE_CFG_IO_LVDE_MASK | + +#endif /* FSL_FEATURE_MCX_SPC_HAS_IOVDD_VD */ + SPC_ACTIVE_CFG_SYS_HVDE_MASK | SPC_ACTIVE_CFG_SYS_LVDE_MASK | SPC_ACTIVE_CFG_CORE_LVDE_MASK + +#if (defined(FSL_FEATURE_MCX_SPC_HAS_COREVDD_HVD) && FSL_FEATURE_MCX_SPC_HAS_COREVDD_HVD) + | SPC_ACTIVE_CFG_CORE_HVDE_MASK + +#endif /* FSL_FEATURE_MCX_SPC_HAS_COREVDD_HVD */ + ); + return state; +} + +/*! + * @brief Configs Bandgap mode in Active mode. + * + * @note To disable bandgap in Active mode: + * 1. Disable all LVD's and HVD's in active mode; + * 2. Disable Glitch detect; + * 3. Configrue LDO's and DCDC to low drive strength in active mode; + * 4. Invoke this function to disable bandgap in active mode; + * otherwise the error status will be reported. + * + * @note Some other system resources(such as PLL, CMP) require bandgap to be enabled, to disable bandgap please + * take care of other system resources. + * + * @param base SPC peripheral base address. + * @param mode The Bandgap mode be selected. + * + * @retval #kStatus_SPC_BandgapModeWrong The Bandgap can not be disabled in active mode. + * @retval #kStatus_Success Config Bandgap mode in Active power mode successful. + */ +status_t SPC_SetActiveModeBandgapModeConfig(SPC_Type *base, spc_bandgap_mode_t mode); + +#if (defined(FSL_FEATURE_MCX_SPC_HAS_LPBUFF_EN_BIT) && FSL_FEATURE_MCX_SPC_HAS_LPBUFF_EN_BIT) +/*! + * @brief Enables/Disable the CMP Bandgap Buffer in Active mode. + * + * @param base SPC peripheral base address. + * @param enable Enable/Disable CMP Bandgap buffer. + * true - Enable Buffer Stored Reference voltage to CMP. + * false - Disable Buffer Stored Reference voltage to CMP. + */ +static inline void SPC_EnableActiveModeCMPBandgapBuffer(SPC_Type *base, bool enable) +{ + if (enable) + { + base->ACTIVE_CFG |= SPC_ACTIVE_CFG_LPBUFF_EN_MASK; + } + else + { + base->ACTIVE_CFG &= ~SPC_ACTIVE_CFG_LPBUFF_EN_MASK; + } +} +#endif /* FSL_FEATURE_MCX_SPC_HAS_LPBUFF_EN_BIT */ + +/*! + * @brief Sets the delay when the regulators change voltage level in Active mode. + * + * @param base SPC peripheral base address. + * @param delay The number of SPC timer clock cycles. + */ +static inline void SPC_SetActiveModeVoltageTrimDelay(SPC_Type *base, uint16_t delay) +{ + base->ACTIVE_VDELAY = SPC_ACTIVE_VDELAY_ACTIVE_VDELAY(delay); +} + +/*! + * @brief Configs all settings of regulators in Active mode at a time. + * + * @note This function is used to overwrite all settings of regulators(including bandgap mode, regulators' + * drive strength and voltage level) in active mode at a time. + * + * @note Enable/disable LVDs/HVDs before invoking this function. + * + * @note This function will check input parameters based on hardware restrictions before setting registers, if input + * parameters do not satisfy hardware restrictions the specific error will be reported. + * + * + * @note Some hardware restrictions not covered, application should be aware of this and follow this hardware + * restrictions otherwise some unkown issue may occur: + * 1. If Core LDO's drive strength are set to same value in both Active mode and low power mode, + * the voltage level should also set to same value. + * 2. When switching Core LDO's drive strength from low to normal, ensure the LDO_CORE high voltage level is set + * to same level that was set prior to switching to the LDO_CORE drive strength. Otherwise, if the LVDs are + * enabled, an unexpected LVD can occur. + * + * @note If this function can not satisfy some tricky settings, please invoke other APIs in low-level function group. + * + * @param base SPC peripheral base address. + * @param config Pointer to spc_active_mode_regulators_config_t structure. + * + * @retval #kStatus_Success Config regulators in Active power mode successful. + * @retval #kStatus_SPC_BandgapModeWrong Based on input setting, bandgap can not be disabled. + * @retval #kStatus_SPC_Busy The SPC instance is busy to execute any type of power mode transition. + * @retval #kStatus_SPC_CORELDOLowDriveStrengthIgnore Any of LVDs/HVDs kept enabled before invoking this function. + * @retval #kStatus_SPC_SYSLDOOverDriveVoltageFail Fail to regulator to Over Drive Voltage due to + * System VDD HVD is not disabled. + * @retval #kStatus_SPC_SYSLDOLowDriveStrengthIgnore Any of LVDs/HVDs kept enabled before invoking this function. + * @retval #kStatus_SPC_CORELDOVoltageWrong Core LDO and System LDO do not have same voltage level. + */ +status_t SPC_SetActiveModeRegulatorsConfig(SPC_Type *base, const spc_active_mode_regulators_config_t *config); + +#if !(defined(FSL_FEATURE_MCX_SPC_HAS_NO_GLITCH_DETECT) && FSL_FEATURE_MCX_SPC_HAS_NO_GLITCH_DETECT) +/*! + * @brief Disables/Enables VDD Core Glitch Detect in Active mode. + * + * @note State of glitch detect disable feature will be ignored if bandgap is disabled and + * glitch detect hardware will be forced to OFF state. + * + * @param base SPC peripheral base address. + * @param disable Used to disable/enable VDD Core Glitch detect feature. + * - \b true Disable VDD Core Low Voltage detect; + * - \b false Enable VDD Core Low Voltage detect. + */ +static inline void SPC_DisableActiveModeVddCoreGlitchDetect(SPC_Type *base, bool disable) +{ + if (disable) + { + base->ACTIVE_CFG |= SPC_ACTIVE_CFG_GLITCH_DETECT_DISABLE_MASK; + } + else + { + base->ACTIVE_CFG &= ~SPC_ACTIVE_CFG_GLITCH_DETECT_DISABLE_MASK; + } +} + +/*! + * @brief Check if Glitch detect hardware is enabled in active mode. + * + * @param base SPC peripheral base address. + * @return Indicate if Glitch detector is enabled. + */ +static inline bool SPC_CheckActiveModeVddCoreGlitchDetectEnabled(SPC_Type *base) +{ + if ((base->ACTIVE_CFG & SPC_ACTIVE_CFG_GLITCH_DETECT_DISABLE_MASK) == 0UL) + { + return true; + } + else + { + return false; + } +} + +#endif /* FSL_FEATURE_MCX_SPC_HAS_NO_GLITCH_DETECT */ + +/*! + * @brief Enables analog modules in active mode. + * + * @param base SPC peripheral base address. + * @param maskValue The mask of analog modules to enable in active mode, should be the OR'ed value + * of @ref spc_analog_module_control. + */ +static inline void SPC_EnableActiveModeAnalogModules(SPC_Type *base, uint32_t maskValue) +{ + base->ACTIVE_CFG1 |= SPC_ACTIVE_CFG1_SOC_CNTRL(maskValue); +} + +/*! + * @brief Disables analog modules in active mode. + * + * @param base SPC peripheral base address. + * @param maskValue The mask of analog modules to disable in active mode, should be the OR'ed value + * of @ref spc_analog_module_control. + */ +static inline void SPC_DisableActiveModeAnalogModules(SPC_Type *base, uint32_t maskValue) +{ + base->ACTIVE_CFG1 &= ~SPC_ACTIVE_CFG1_SOC_CNTRL(maskValue); +} + +/*! + * @brief Gets enabled analog modules that enabled in active mode. + * + * @param base SPC peripheral base address. + * + * @return The mask of enabled analog modules that enabled in active mode. + */ +static inline uint32_t SPC_GetActiveModeEnabledAnalogModules(SPC_Type *base) +{ + return base->ACTIVE_CFG1; +} + +/*! @} */ + +/*! + * @name Low Power mode configuration + * @{ + */ + +/*! + * @brief Gets the Bandgap mode in Low Power mode. + * + * @param base SPC peripheral base address. + * @return Bandgap mode in the type of @ref spc_bandgap_mode_t enumeration. + */ +static inline spc_bandgap_mode_t SPC_GetLowPowerModeBandgapMode(SPC_Type *base) +{ + return (spc_bandgap_mode_t)(uint32_t)((base->LP_CFG & SPC_LP_CFG_BGMODE_MASK) >> SPC_LP_CFG_BGMODE_SHIFT); +} + +/*! + * @brief Gets the status of all voltage detectors in Low Power mode. + * + * @param base SPC peripheral base address. + * @return The status of all voltage detectors in low power mode. + */ +static inline uint32_t SPC_GetLowPowerModeVoltageDetectStatus(SPC_Type *base) +{ + uint32_t state; + state = base->LP_CFG & ( +#if (defined(FSL_FEATURE_MCX_SPC_HAS_IOVDD_VD) && FSL_FEATURE_MCX_SPC_HAS_IOVDD_VD) + SPC_LP_CFG_IO_HVDE_MASK | SPC_LP_CFG_IO_LVDE_MASK | + +#endif /* FSL_FEATURE_MCX_SPC_HAS_IOVDD_VD */ + SPC_LP_CFG_SYS_HVDE_MASK | SPC_LP_CFG_SYS_LVDE_MASK | SPC_LP_CFG_CORE_LVDE_MASK + +#if (defined(FSL_FEATURE_MCX_SPC_HAS_COREVDD_HVD) && FSL_FEATURE_MCX_SPC_HAS_COREVDD_HVD) + | SPC_LP_CFG_CORE_HVDE_MASK + +#endif /* FSL_FEATURE_MCX_SPC_HAS_COREVDD_HVD */ + ); + return state; +} + +/*! + * @brief Enables/Disables Low Power IREF in low power modes. + * + * This function enables/disables Low Power IREF. Low Power IREF can only get + * disabled in Deep power down mode. In other low power modes, the Low Power IREF + * is always enabled. + * + * @param base SPC peripheral base address. + * @param enable Enable/Disable Low Power IREF. + * true - Enable Low Power IREF for Low Power modes. + * false - Disable Low Power IREF for Deep Power Down mode. + */ +static inline void SPC_EnableLowPowerModeLowPowerIREF(SPC_Type *base, bool enable) +{ + if (enable) + { + base->LP_CFG |= SPC_LP_CFG_LP_IREFEN_MASK; + } + else + { + base->LP_CFG &= ~SPC_LP_CFG_LP_IREFEN_MASK; + } +} + +/*! + * @brief Configs Bandgap mode in Low Power mode. + * + * @note To disable Bandgap in Low-power mode: + * 1. Disable all LVD's ad HVD's in low power mode; + * 2. Disable Glitch detect in low power mode; + * 3. Configure LDO's and DCDC to low drive strength in low power mode; + * 4. Disable bandgap in low power mode; + * Otherwise, the error status will be reported. + * + * @note Some other system resources(such as PLL, CMP) require bandgap to be enabled, to disable bandgap please + * take care of other system resources. + * + * @param base SPC peripheral base address. + * @param mode The Bandgap mode be selected. + * + * @retval #kStatus_SPC_BandgapModeWrong The bandgap mode setting in Low Power mode is wrong. + * @retval #kStatus_Success Config Bandgap mode in Low Power power mode successful. + */ +status_t SPC_SetLowPowerModeBandgapmodeConfig(SPC_Type *base, spc_bandgap_mode_t mode); + +#if (defined(FSL_FEATURE_MCX_SPC_HAS_SRAMLDO_DPD_ON_BIT) && FSL_FEATURE_MCX_SPC_HAS_SRAMLDO_DPD_ON_BIT) +/*! + * @brief Enables/disables SRAM_LDO deep power low power IREF. + * + * @param base SPC peripheral base address. + * @param enable Used to enable/disable low power IREF : + * - \b true: Low Power IREF is enabled ; + * - \b false: Low Power IREF is disabled for power saving. + */ +static inline void SPC_EnableSRAMLdOLowPowerModeIREF(SPC_Type *base, bool enable) +{ + if (enable) + { + base->LP_CFG |= SPC_LP_CFG_SRAMLDO_DPD_ON_MASK; + } + else + { + base->LP_CFG &= ~SPC_LP_CFG_SRAMLDO_DPD_ON_MASK; + } +} +#endif /* FSL_FEATURE_MCX_SPC_HAS_SRAMLDO_DPD_ON_BIT */ + +#if (defined(FSL_FEATURE_MCX_SPC_HAS_LPBUFF_EN_BIT) && FSL_FEATURE_MCX_SPC_HAS_LPBUFF_EN_BIT) +/*! + * @brief Enables/Disables CMP Bandgap Buffer. + * + * This function gates CMP bandgap buffer. CMP bandgap buffer is automatically disabled and turned off + * in Deep Power Down mode. + * + * @deprecated No longer used, please use SPC_EnableLowPowerModeCMPBandgapBuffer as instead. + * + * @param base SPC peripheral base address. + * @param enable Enable/Disable CMP Bandgap buffer. + * true - Enable Buffer Stored Reference Voltage to CMP. + * false - Disable Buffer Stored Reference Voltage to CMP. + */ +static inline void SPC_EnableLowPowerModeCMPBandgapBufferMode(SPC_Type *base, bool enable) +{ + if (enable) + { + base->LP_CFG |= SPC_LP_CFG_LPBUFF_EN_MASK; + } + else + { + base->LP_CFG &= ~SPC_LP_CFG_LPBUFF_EN_MASK; + } +} + +/*! + * @brief Enables/Disables CMP Bandgap Buffer. + * + * This function gates CMP bandgap buffer. CMP bandgap buffer is automatically disabled and turned off + * in Deep Power Down mode. + * + * @deprecated No longer used. + * + * @param base SPC peripheral base address. + * @param enable Enable/Disable CMP Bandgap buffer. + * true - Enable Buffer Stored Reference Voltage to CMP. + * false - Disable Buffer Stored Reference Voltage to CMP. + */ +static inline void SPC_EnableLowPowerModeCMPBandgapBuffer(SPC_Type *base, bool enable) +{ + if (enable) + { + base->LP_CFG |= SPC_LP_CFG_LPBUFF_EN_MASK; + } + else + { + base->LP_CFG &= ~SPC_LP_CFG_LPBUFF_EN_MASK; + } +} +#endif /* FSL_FEATURE_MCX_SPC_HAS_LPBUFF_EN_BIT */ + +#if (defined(FSL_FEATURE_MCX_SPC_HAS_COREVDD_IVS_EN_BIT) && FSL_FEATURE_MCX_SPC_HAS_COREVDD_IVS_EN_BIT) +/*! + * @brief Enables/Disables CORE VDD IVS(Internal Voltage Scaling) in power down modes. + * + * This function gates CORE VDD IVS. When enabled, the IVS regulator will scale the + * external input CORE VDD to a lower voltage level to reduce internal leakage. + * IVS is invalid in Sleep or Deep power down mode. + * + * @param base SPC peripheral base address. + * @param enable Enable/Disable IVS. + * true - enable CORE VDD IVS in Power Down mode. + * false - disable CORE VDD IVS in Power Down mode. + */ +static inline void SPC_EnableLowPowerModeCoreVDDInternalVoltageScaling(SPC_Type *base, bool enable) +{ + if (enable) + { + base->LP_CFG |= SPC_LP_CFG_COREVDD_IVS_EN_MASK; + } + else + { + base->LP_CFG &= ~SPC_LP_CFG_COREVDD_IVS_EN_MASK; + } +} +#endif /* FSL_FEATURE_MCX_SPC_HAS_COREVDD_IVS_EN_BIT */ + +/*! + * @brief Sets the delay when exit the low power modes. + * + * @param base SPC peripheral base address. + * @param delay The number of SPC timer clock cycles that the SPC waits on exit from low power modes. + */ +static inline void SPC_SetLowPowerWakeUpDelay(SPC_Type *base, uint16_t delay) +{ + base->LPWKUP_DELAY = SPC_LPWKUP_DELAY_LPWKUP_DELAY(delay); +} + +/*! + * @brief Configs all settings of regulators in Low power mode at a time. + * + * @note This function is used to overwrite all settings of regulators(including bandgap mode, regulators' + * drive strength and voltage level) in low power mode at a time. + * + * @note Enable/disable LVDs/HVDs before invoking this function. + * + * @note This function will check input parameters based on hardware restrictions before setting registers, if input + * parameters do not satisfy hardware restrictions the specific error will be reported. + * + * @note Some hardware restrictions not covered, application should be aware of this and follow this hardware + * restrictions otherwise some unkown issue may occur: + * 1. If Core LDO's drive strength are set to same value in both Active mode and low power mode, + * the voltage level should also set to same value. + * 2. When switching Core LDO's drive strength from low to normal, ensure the LDO_CORE high voltage level is set + * to same level that was set prior to switching to the LDO_CORE drive strength. Otherwise, if the LVDs are + * enabled, an unexpected LVD can occur. + * + * @note If this function can not satisfy some tricky settings, please invoke other APIs in low-level function group. + * + * @param base SPC peripheral base address. + * @param config Pointer to spc_lowpower_mode_regulators_config_t structure. + * @retval #kStatus_Success Config regulators in Low power mode successful. + * @retval #kStatus_SPC_BandgapModeWrong The bandgap should not be disabled based on input settings. + * @retval #kStatus_SPC_CORELDOLowDriveStrengthIgnore Set driver strength to low will be ignored. + * @retval #kStatus_SPC_SYSLDOLowDriveStrengthIgnore Set driver strength to low will be ignored. + * @retval #kStatus_SPC_CORELDOVoltageWrong Core LDO and System LDO do not have same voltage level. + */ +status_t SPC_SetLowPowerModeRegulatorsConfig(SPC_Type *base, const spc_lowpower_mode_regulators_config_t *config); + +#if !(defined(FSL_FEATURE_MCX_SPC_HAS_NO_GLITCH_DETECT) && FSL_FEATURE_MCX_SPC_HAS_NO_GLITCH_DETECT) +/*! + * @brief Disable/Enable VDD Core Glitch Detect in low power mode. + * + * @note State of glitch detect disable feature will be ignored if bandgap is disabled and + * glitch detect hardware will be forced to OFF state. + * + * @param base SPC peripheral base address. + * @param disable Used to disable/enable VDD Core Glitch detect feature. + * - \b true Disable VDD Core Low Voltage detect; + * - \b false Enable VDD Core Low Voltage detect. + */ +static inline void SPC_DisableLowPowerModeVddCoreGlitchDetect(SPC_Type *base, bool disable) +{ + if (disable) + { + base->LP_CFG |= SPC_LP_CFG_GLITCH_DETECT_DISABLE_MASK; + } + else + { + base->LP_CFG &= ~SPC_LP_CFG_GLITCH_DETECT_DISABLE_MASK; + } +} + +/*! + * @brief Check if Glitch detect hardware is enabled in low power mode. + * + * @param base SPC peripheral base address. + * @return Indicate if Glitch detector is enabled. + */ +static inline bool SPC_CheckLowPowerModeVddCoreGlitchDetectEnabled(SPC_Type *base) +{ + if ((base->LP_CFG & SPC_LP_CFG_GLITCH_DETECT_DISABLE_MASK) == 0UL) + { + return true; + } + else + { + return false; + } +} +#endif + +/*! + * @brief Enables analog modules in low power modes. + * + * @param base SPC peripheral base address. + * @param maskValue The mask of analog modules to enable in low power modes, should be OR'ed value + of @ref spc_analog_module_control. + */ +static inline void SPC_EnableLowPowerModeAnalogModules(SPC_Type *base, uint32_t maskValue) +{ + base->LP_CFG1 |= SPC_LP_CFG1_SOC_CNTRL(maskValue); +} + +/*! + * @brief Disables analog modules in low power modes. + * + * @param base SPC peripheral base address. + * @param maskValue The mask of analog modules to disable in low power modes, should be OR'ed value + of @ref spc_analog_module_control. + */ +static inline void SPC_DisableLowPowerModeAnalogModules(SPC_Type *base, uint32_t maskValue) +{ + base->LP_CFG1 &= ~SPC_LP_CFG1_SOC_CNTRL(maskValue); +} + +/*! + * @brief Gets enabled analog modules that enabled in low power modes. + * + * @param base SPC peripheral base address. + * + * @return The mask of enabled analog modules that enabled in low power modes. + */ +static inline uint32_t SPC_GetLowPowerModeEnabledAnalogModules(SPC_Type *base) +{ + return base->LP_CFG1; +} + +/*! @} */ + +/*! + * @name Voltage Detect Status + * @{ + */ +/*! + * @brief Get Voltage Detect Status Flags. + * + * @param base SPC peripheral base address. + * @return Voltage Detect Status Flags. See @ref _spc_voltage_detect_flags for details. + */ +static inline uint8_t SPC_GetVoltageDetectStatusFlag(SPC_Type *base) +{ + return (uint8_t)(base->VD_STAT); +} + +/*! + * @brief Clear Voltage Detect Status Flags. + * + * @param base SPC peripheral base address. + * @param mask The mask of the voltage detect status flags. See @ref _spc_voltage_detect_flags for details. + */ +static inline void SPC_ClearVoltageDetectStatusFlag(SPC_Type *base, uint8_t mask) +{ + base->VD_STAT |= mask; +} + +/*! @} */ + +/*! + * @name Voltage Detect configuration for Core voltage domain. + * @{ + */ + +/*! + * @brief Configs CORE voltage detect options. + * + * @note: Setting both the voltage detect interrupt and reset + * enable will cause interrupt to be generated on exit from reset. + * If those conditioned is not desired, interrupt/reset so only one is enabled. + * + * @param base SPC peripheral base address. + * @param config Pointer to spc_core_voltage_detect_config_t structure. + */ +void SPC_SetCoreVoltageDetectConfig(SPC_Type *base, const spc_core_voltage_detect_config_t *config); + +/*! + * @brief Locks Core voltage detect reset setting. + * + * This function locks core voltage detect reset setting. After invoking this function + * any configuration of Core voltage detect reset will be ignored. + * + * @param base SPC peripheral base address. + */ +static inline void SPC_LockCoreVoltageDetectResetSetting(SPC_Type *base) +{ + base->VD_CORE_CFG |= SPC_VD_CORE_CFG_LOCK_MASK; +} + +/*! + * @brief Unlocks Core voltage detect reset setting. + * + * This function unlocks core voltage detect reset setting. If locks the Core + * voltage detect reset setting, invoking this function to unlock. + * + * @param base SPC peripheral base address. + */ +static inline void SPC_UnlockCoreVoltageDetectResetSetting(SPC_Type *base) +{ + base->VD_CORE_CFG &= ~SPC_VD_CORE_CFG_LOCK_MASK; +} + +/*! + * @brief Enables/Disables the Core Low Voltage Detector in Active mode. + * + * @note If the CORE_LDO low voltage detect is enabled in Active mode, please note that the bandgap must be enabled + * and the drive strength of each regulator must not set to low. + * + * @param base SPC peripheral base address. + * @param enable Enable/Disable Core LVD. + * true - Enable Core Low voltage detector in active mode. + * false - Disable Core Low voltage detector in active mode. + * + * @retval #kStatus_Success Enable/Disable Core Low Voltage Detect successfully. + */ +status_t SPC_EnableActiveModeCoreLowVoltageDetect(SPC_Type *base, bool enable); + +/*! + * @brief Enables/Disables the Core Low Voltage Detector in Low Power mode. + * + * This function enables/disables the Core Low Voltage Detector. + * If enabled the Core Low Voltage detector. The Bandgap mode in + * low power mode must be programmed so that Bandgap is enabled. + * + * @note If the CORE_LDO low voltage detect is enabled in Low Power mode, please note that the bandgap must be enabled + * and the drive strength of each regulator must not set to low in Low Power mode. + * + * @param base SPC peripheral base address. + * @param enable Enable/Disable Core HVD. + * true - Enable Core Low voltage detector in low power mode. + * false - Disable Core Low voltage detector in low power mode. + * + * @retval #kStatus_Success Enable/Disable Core Low Voltage Detect in low power mode successfully. + */ +status_t SPC_EnableLowPowerModeCoreLowVoltageDetect(SPC_Type *base, bool enable); + +#if (defined(FSL_FEATURE_MCX_SPC_HAS_COREVDD_HVD) && FSL_FEATURE_MCX_SPC_HAS_COREVDD_HVD) +/*! + * @brief Enables/Disables the Core High Voltage Detector in Active mode. + * + * @note If the CORE_LDO high voltage detect is enabled in Active mode, please note that the bandgap must be enabled + * and the drive strength of each regulator must not set to low. + * + * @param base SPC peripheral base address. + * @param enable Enable/Disable Core HVD. + * true - Enable Core High voltage detector in active mode. + * false - Disable Core High voltage detector in active mode. + * + * @retval #kStatus_Success Enable/Disable Core High Voltage Detect successfully. + */ +status_t SPC_EnableActiveModeCoreHighVoltageDetect(SPC_Type *base, bool enable); + +/*! + * @brief Enables/Disables the Core High Voltage Detector in Low Power mode. + * + * This function enables/disables the Core High Voltage Detector. + * If enabled the Core High Voltage detector. The Bandgap mode in + * low power mode must be programmed so that Bandgap is enabled. + * + * @note If the CORE_LDO high voltage detect is enabled in Low Power mode, please note that the bandgap must be enabled + * and the drive strength of each regulator must not set to low in low power mode. + * + * @param base SPC peripheral base address. + * @param enable Enable/Disable Core HVD. + * true - Enable Core High voltage detector in low power mode. + * false - Disable Core High voltage detector in low power mode. + * + * @retval #kStatus_Success Enable/Disable Core High Voltage Detect in low power mode successfully. + */ +status_t SPC_EnableLowPowerModeCoreHighVoltageDetect(SPC_Type *base, bool enable); +#endif /* FSL_FEATURE_MCX_SPC_HAS_COREVDD_HVD */ + +/*! @} */ + +/*! + * @name Voltage detect configuration for System Voltage domain + * @{ + */ +/*! + * @brief Set system VDD Low-voltage level selection. + * + * This function selects the system VDD low-voltage level. Changing system VDD low-voltage level + * must be done after disabling the System VDD low voltage reset and interrupt. + * + * @deprecated In latest RM, reserved for all devices, will removed in next release. + * + * @param base SPC peripheral base address. + * @param level System VDD Low-Voltage level selection. + */ +void SPC_SetSystemVDDLowVoltageLevel(SPC_Type *base, spc_low_voltage_level_select_t level); + +/*! + * @brief Configs SYS voltage detect options. + * + * This function config SYS voltage detect options. + * @note: Setting both the voltage detect interrupt and reset + * enable will cause interrupt to be generated on exit from reset. + * If those conditioned is not desired, interrupt/reset so only one is enabled. + * + * @param base SPC peripheral base address. + * @param config Pointer to spc_system_voltage_detect_config_t structure. + */ +void SPC_SetSystemVoltageDetectConfig(SPC_Type *base, const spc_system_voltage_detect_config_t *config); + +/*! + * @brief Lock System voltage detect reset setting. + * + * This function locks system voltage detect reset setting. After invoking this function + * any configuration of System Voltage detect reset will be ignored. + * + * @param base SPC peripheral base address. + */ +static inline void SPC_LockSystemVoltageDetectResetSetting(SPC_Type *base) +{ + base->VD_SYS_CFG |= SPC_VD_SYS_CFG_LOCK_MASK; +} + +/*! + * @brief Unlock System voltage detect reset setting. + * + * This function unlocks system voltage detect reset setting. If locks the System + * voltage detect reset setting, invoking this function to unlock. + * + * @param base SPC peripheral base address. + */ +static inline void SPC_UnlockSystemVoltageDetectResetSetting(SPC_Type *base) +{ + base->VD_SYS_CFG &= ~SPC_VD_SYS_CFG_LOCK_MASK; +} + +/*! + * @brief Enables/Disables the System High Voltage Detector in Active mode. + * + * @note If the System_LDO high voltage detect is enabled in Active mode, please note that the bandgap must be enabled + * and the drive strength of each regulator must not set to low in Active mode. + * + * @param base SPC peripheral base address. + * @param enable Enable/Disable System HVD. + * true - Enable System High voltage detector in active mode. + * false - Disable System High voltage detector in active mode. + * + * @retval #kStatus_Success Enable/Disable System High Voltage Detect successfully. + */ +status_t SPC_EnableActiveModeSystemHighVoltageDetect(SPC_Type *base, bool enable); + +/*! + * @brief Enables/Disable the System Low Voltage Detector in Active mode. + * + * @note If the System_LDO low voltage detect is enabled in Active mode, + * please note that the bandgap must be enabled and the drive strength of each + * regulator must not set to low in Active mode. + * + * @param base SPC peripheral base address. + * @param enable Enable/Disable System LVD. + * true - Enable System Low voltage detector in active mode. + * false - Disable System Low voltage detector in active mode. + * + * @retval #kStatus_Success Enable/Disable the System Low Voltage Detect successfully. + */ +status_t SPC_EnableActiveModeSystemLowVoltageDetect(SPC_Type *base, bool enable); + +/*! + * @brief Enables/Disables the System High Voltage Detector in Low Power mode. + * + * @note If the System_LDO high voltage detect is enabled in Low Power mode, please note + * that the bandgap must be enabled and the drive strength of each regulator must + * not set to low in Low Power mode. + * + * @param base SPC peripheral base address. + * @param enable Enable/Disable System HVD. + * true - Enable System High voltage detector in low power mode. + * false - Disable System High voltage detector in low power mode. + * + * @retval #kStatus_Success Enable/Disable System High Voltage Detect in low power mode successfully. + */ +status_t SPC_EnableLowPowerModeSystemHighVoltageDetect(SPC_Type *base, bool enable); + +/*! + * @brief Enables/Disables the System Low Voltage Detector in Low Power mode. + * + * @note If the System_LDO low voltage detect is enabled in Low Power mode, + * please note that the bandgap must be enabled and the drive strength of each + * regulator must not set to low in Low Power mode. + * + * @param base SPC peripheral base address. + * @param enable Enable/Disable System HVD. + * true - Enable System Low voltage detector in low power mode. + * false - Disable System Low voltage detector in low power mode. + * + * @retval #kStatus_Success Enables System Low Voltage Detect in low power mode successfully. + */ +status_t SPC_EnableLowPowerModeSystemLowVoltageDetect(SPC_Type *base, bool enable); + +/*! @} */ + +#if (defined(FSL_FEATURE_MCX_SPC_HAS_IOVDD_VD) && FSL_FEATURE_MCX_SPC_HAS_IOVDD_VD) +/*! + * @name Voltage detect configuration for IO voltage domain + * @{ + */ +/*! + * @brief Set IO VDD Low-Voltage level selection. + * + * This function selects the IO VDD Low-voltage level. Changing IO VDD low-voltage level + * must be done after disabling the IO VDD low voltage reset and interrupt. + * + * @param base SPC peripheral base address. + * @param level IO VDD Low-voltage level selection. + */ +void SPC_SetIOVDDLowVoltageLevel(SPC_Type *base, spc_low_voltage_level_select_t level); + +/*! + * @brief Configs IO voltage detect options. + * + * This function config IO voltage detect options. + * @note: Setting both the voltage detect interrupt and reset + * enable will cause interrupt to be generated on exit from reset. + * If those conditioned is not desired, interrupt/reset so only one is enabled. + * + * @param base SPC peripheral base address. + * @param config Pointer to spc_voltage_detect_config_t structure. + */ +void SPC_SetIOVoltageDetectConfig(SPC_Type *base, const spc_io_voltage_detect_config_t *config); + +/*! + * @brief Lock IO Voltage detect reset setting. + * + * This function locks IO voltage detect reset setting. After invoking this function + * any configuration of system voltage detect reset will be ignored. + * + * @param base SPC peripheral base address. + */ +static inline void SPC_LockIOVoltageDetectResetSetting(SPC_Type *base) +{ + base->VD_IO_CFG |= SPC_VD_IO_CFG_LOCK_MASK; +} + +/*! + * @brief Unlock IO voltage detect reset setting. + * + * This function unlocks IO voltage detect reset setting. If locks the IO + * voltage detect reset setting, invoking this function to unlock. + * + * @param base SPC peripheral base address. + */ +static inline void SPC_UnlockIOVoltageDetectResetSetting(SPC_Type *base) +{ + base->VD_IO_CFG &= ~SPC_VD_IO_CFG_LOCK_MASK; +} + +/*! + * @brief Enables/Disables the IO High Voltage Detector in Active mode. + * + * @note If the IO high voltage detect is enabled in Active mode, please note that the bandgap must be enabled + * and the drive strength of each regulator must not set to low in Active mode. + * + * @param base SPC peripheral base address. + * @param enable Enable/Disable IO HVD. + * true - Enable IO High voltage detector in active mode. + * false - Disable IO High voltage detector in active mode. + * + * @retval #kStatus_Success Enable/Disable IO High Voltage Detect successfully. + */ +status_t SPC_EnableActiveModeIOHighVoltageDetect(SPC_Type *base, bool enable); + +/*! + * @brief Enables/Disables the IO Low Voltage Detector in Active mode. + * + * @note If the IO low voltage detect is enabled in Active mode, please note that the bandgap must be enabled + * and the drive strength of each regulator must not set to low in Active mode. + * + * @param base SPC peripheral base address. + * @param enable Enable/Disable IO LVD. + * true - Enable IO Low voltage detector in active mode. + * false - Disable IO Low voltage detector in active mode. + * + * @retval #kStatus_Success Enable IO Low Voltage Detect successfully. + */ +status_t SPC_EnableActiveModeIOLowVoltageDetect(SPC_Type *base, bool enable); + +/*! + * @brief Enables/Disables the IO High Voltage Detector in Low Power mode. + * + * @note If the IO high voltage detect is enabled in Low Power mode, please note that the bandgap must be enabled + * and the drive strength of each regulator must not set to low in Low Power mode. + * + * @param base SPC peripheral base address. + * @param enable Enable/Disable IO HVD. + * true - Enable IO High voltage detector in low power mode. + * false - Disable IO High voltage detector in low power mode. + * + * @retval #kStatus_Success Enable IO High Voltage Detect in low power mode successfully. + */ +status_t SPC_EnableLowPowerModeIOHighVoltageDetect(SPC_Type *base, bool enable); + +/*! + * @brief Enables/Disables the IO Low Voltage Detector in Low Power mode. + * + * @note If the IO low voltage detect is enabled in Low Power mode, please note that the bandgap must be enabled + * and the drive strength of each regulator must not set to low in Low Power mode. + * + * @param base SPC peripheral base address. + * @param enable Enable/Disable IO LVD. + * true - Enable IO Low voltage detector in low power mode. + * false - Disable IO Low voltage detector in low power mode. + * + * @retval #kStatus_Success Enable/Disable IO Low Voltage Detect in low power mode successfully. + */ +status_t SPC_EnableLowPowerModeIOLowVoltageDetect(SPC_Type *base, bool enable); + +/*! @} */ + +#endif /* FSL_FEATURE_MCX_SPC_HAS_IOVDD_VD */ + +/*! + * @name External Voltage domains configuration + * @{ + */ +/*! + * @brief Configs external voltage domains + * + * This function configs external voltage domains isolation. + * + * @param base SPC peripheral base address. + * @param lowPowerIsoMask The mask of external domains isolate enable during low power mode. Please read the Reference + * Manual for the Bitmap. + * @param IsoMask The mask of external domains isolate. Please read the Reference Manual for the Bitmap. + */ +void SPC_SetExternalVoltageDomainsConfig(SPC_Type *base, uint8_t lowPowerIsoMask, uint8_t IsoMask); + +/*! + * @brief Gets External Domains status. + * + * @param base SPC peripheral base address. + * @return The status of each external domain. + */ +static inline uint8_t SPC_GetExternalDomainsStatus(SPC_Type *base) +{ + return (uint8_t)(base->EVD_CFG >> SPC_EVD_CFG_REG_EVDSTAT_SHIFT); +} + +/*! @} */ + +/*! + * @name Low Level APIs To Set CORE LDO Regulator + * @{ + */ + +#if (defined(FSL_FEATURE_MCX_SPC_HAS_CNTRL_REG) && FSL_FEATURE_MCX_SPC_HAS_CNTRL_REG) +/*! + * @brief Enable/Disable Core LDO regulator. + * + * @note The CORE LDO enable bit is write-once. + * + * @param base SPC peripheral base address. + * @param enable Enable/Disable CORE LDO Regulator. + * true - Enable CORE LDO Regulator. + * false - Disable CORE LDO Regulator. + */ +static inline void SPC_EnableCoreLDORegulator(SPC_Type *base, bool enable) +{ + if (enable) + { + base->CNTRL |= SPC_CNTRL_CORELDO_EN_MASK; + } + else + { + /* + * $Branch Coverage Justification$ + * If CORE_LDO is disabled, all RAMs data will powered off. + */ + base->CNTRL &= ~SPC_CNTRL_CORELDO_EN_MASK; + } +} +#endif /* FSL_FEATURE_MCX_SPC_HAS_CNTRL_REG */ + +#if (defined(FSL_FEATURE_MCX_SPC_HAS_DPDOWN_PULLDOWN_DISABLE_BIT) && \ + FSL_FEATURE_MCX_SPC_HAS_DPDOWN_PULLDOWN_DISABLE_BIT) +/*! + * @brief Enable/Disable the CORE LDO Regulator pull down in Deep Power Down. + * + * @note This function only useful when enabled the CORE LDO Regulator. + * + * @param base SPC peripheral base address. + * @param pulldown Enable/Disable CORE LDO pulldown in Deep Power Down mode. + * true - CORE LDO Regulator will discharge in Deep Power Down mode. + * false - CORE LDO Regulator will not discharge in Deep Power Down mode. + */ +static inline void SPC_PullDownCoreLDORegulator(SPC_Type *base, bool pulldown) +{ + if (pulldown) + { + base->CORELDO_CFG &= ~SPC_CORELDO_CFG_DPDOWN_PULLDOWN_DISABLE_MASK; + } + else + { + base->CORELDO_CFG |= SPC_CORELDO_CFG_DPDOWN_PULLDOWN_DISABLE_MASK; + } +} +#endif /* FSL_FEATURE_MCX_SPC_HAS_DPDOWN_PULLDOWN_DISABLE_BIT */ + +/*! + * @brief Configs Core LDO Regulator in Active mode. + * + * @note The bandgap must be enabled before invoking this function. + * @note To set Core LDO as low drive strength, all HVDs/LVDs must be disabled previously. + * + * @param base SPC peripheral base address. + * @param option Pointer to the spc_active_mode_core_ldo_option_t structure. + * + * @retval kStatus_Success Config Core LDO regulator in Active power mode successful. + * @retval kStatus_SPC_Busy The SPC instance is busy to execute any type of power mode transition. + * @retval kStatus_SPC_BandgapModeWrong Bandgap should be enabled before invoking this function. + * @retval kStatus_SPC_CORELDOLowDriveStrengthIgnore To set Core LDO as low drive strength, + * all LVDs/HVDs must be disabled before invoking this function. + */ +status_t SPC_SetActiveModeCoreLDORegulatorConfig(SPC_Type *base, const spc_active_mode_core_ldo_option_t *option); + +/*! + * @brief Set Core LDO Regulator Voltage level in Active mode. + * + * @param base SPC peripheral base address. + * @param voltageLevel Specify the voltage level of CORE LDO Regulator in Active mode, please + refer to @ref spc_core_ldo_voltage_level_t. + * + * @note In active mode, the Core LDO voltage level should only be changed when the + * Core LDO is in normal drive strength. + * + * @note Update Core LDO voltage level will set Busy flag, + * this function return only when busy flag is cleared by hardware + * + * @retval kStatus_SPC_CORELDOVoltageSetFail The drive strength of Core LDO is not normal. + * @retval kStatus_Success Set Core LDO regulator voltage level in Active power mode successful. + */ +status_t SPC_SetActiveModeCoreLDORegulatorVoltageLevel(SPC_Type *base, spc_core_ldo_voltage_level_t voltageLevel); + +/*! + * @brief Gets CORE LDO Regulator Voltage level. + * + * This function returns the voltage level of CORE LDO Regulator in Active mode. + * + * @param base SPC peripheral base address. + * @return Voltage level of CORE LDO in type of @ref spc_core_ldo_voltage_level_t enumeration. + */ +static inline spc_core_ldo_voltage_level_t SPC_GetActiveModeCoreLDOVDDVoltageLevel(SPC_Type *base) +{ + return (spc_core_ldo_voltage_level_t)(uint32_t)((base->ACTIVE_CFG & SPC_ACTIVE_CFG_CORELDO_VDD_LVL_MASK) >> + SPC_ACTIVE_CFG_CORELDO_VDD_LVL_SHIFT); +} + +#if (defined(FSL_FEATURE_SPC_HAS_CORELDO_VDD_DS) && FSL_FEATURE_SPC_HAS_CORELDO_VDD_DS) +/*! + * @brief Set Core LDO VDD Regulator Drive Strength in Active mode. + * + * @param base SPC peripheral base address. + * @param driveStrength Specify the drive strength of CORE LDO Regulator in Active mode, please + refer to @ref spc_core_ldo_drive_strength_t. + * + * @retval #kStatus_Success Set Core LDO regulator drive strength in Active power mode successful. + * @retval #kStatus_SPC_CORELDOLowDriveStrengthIgnore If any voltage detect enabled, + core_ldo's drive strength can not set to low. + * @retval #kStatus_SPC_BandgapModeWrong The selected bandgap mode is not allowed. + */ +status_t SPC_SetActiveModeCoreLDORegulatorDriveStrength(SPC_Type *base, spc_core_ldo_drive_strength_t driveStrength); + +/*! + * @brief Gets CORE LDO VDD Regulator Drive Strength in Active mode. + * + * @param base SPC peripheral base address. + * @return Drive Strength of CORE LDO regulator in Active mode, please refer to @ref spc_core_ldo_drive_strength_t. + */ +static inline spc_core_ldo_drive_strength_t SPC_GetActiveModeCoreLDODriveStrength(SPC_Type *base) +{ + return (spc_core_ldo_drive_strength_t)(uint32_t)((base->ACTIVE_CFG & SPC_ACTIVE_CFG_CORELDO_VDD_DS_MASK) >> + SPC_ACTIVE_CFG_CORELDO_VDD_DS_SHIFT); +} +#endif /* defined(FSL_FEATURE_SPC_HAS_CORELDO_VDD_DS) && FSL_FEATURE_SPC_HAS_CORELDO_VDD_DS */ + +/*! + * @brief Configs CORE LDO Regulator in low power mode + * + * This function configs CORE LDO Regulator in Low Power mode. + * If CORE LDO VDD Drive Strength is set to Normal, the CORE LDO VDD regulator voltage + * level in Active mode must be equal to the voltage level in Low power mode. And the Bandgap + * must be programmed to select bandgap enabled. + * Core VDD voltage levels for the Core LDO low power regulator can only be changed when the CORE + * LDO Drive Strength set as Normal. + * + * @param base SPC peripheral base address. + * @param option Pointer to the spc_lowpower_mode_core_ldo_option_t structure. + * + * @retval #kStatus_Success Config Core LDO regulator in power mode successfully. + * @retval #kStatus_SPC_Busy The SPC instance is busy to execute any type of power mode transition. + * @retval #kStatus_SPC_CORELDOLowDriveStrengthIgnore Set driver strength to low will be ignored. + * @retval #kStatus_SPC_CORELDOVoltageSetFail. Fail to change Core LDO voltage level. + */ +status_t SPC_SetLowPowerModeCoreLDORegulatorConfig(SPC_Type *base, const spc_lowpower_mode_core_ldo_option_t *option); + +/*! + * @brief Set Core LDO VDD Regulator Voltage level in Low power mode. + * + * @note If CORE LDO's drive strength is set to Normal, the CORE LDO VDD regulator voltage in active mode and low power + * mode must be same. + * @note Voltage level for the CORE LDO in low power mode can only be changed when the CORE LDO Drive Strength set as + * Normal. + * + * @param base SPC peripheral base address. + * @param voltageLevel Voltage level of CORE LDO Regulator in Low power mode, please + refer to @ref spc_core_ldo_voltage_level_t. + * + * @retval #kStatus_SPC_CORELDOVoltageWrong Voltage level in active mode and low power mode is not same. + * @retval #kStatus_Success Set Core LDO regulator voltage level in Low power mode successful. + * @retval #kStatus_SPC_CORELDOVoltageSetFail Fail to update voltage level because drive strength is incorrect. + */ +status_t SPC_SetLowPowerModeCoreLDORegulatorVoltageLevel(SPC_Type *base, spc_core_ldo_voltage_level_t voltageLevel); + +/*! + * @brief Gets the CORE LDO VDD Regulator Voltage Level for Low Power modes. + * + * @param base SPC peripheral base address. + * @return The CORE LDO VDD Regulator's voltage level. + */ +static inline spc_core_ldo_voltage_level_t SPC_GetLowPowerCoreLDOVDDVoltageLevel(SPC_Type *base) +{ + return ((spc_core_ldo_voltage_level_t)(uint32_t)((base->LP_CFG & SPC_LP_CFG_CORELDO_VDD_LVL_MASK) >> + SPC_LP_CFG_CORELDO_VDD_LVL_SHIFT)); +} + +/*! + * @brief Set Core LDO VDD Regulator Drive Strength in Low power mode. + * + * @param base SPC peripheral base address. + * @param driveStrength Specify drive strength of CORE LDO in low power mode. + * + * @retval #kStatus_SPC_CORELDOLowDriveStrengthIgnore Some voltage detect enabled, CORE LDO's drive strength can not set + * as low. + * @retval #kStatus_Success Set Core LDO regulator drive strength in Low power mode successful. + * @retval #kStatus_SPC_BandgapModeWrong Bandgap is disabled when attempt to set CORE LDO work as normal drive strength. + */ +status_t SPC_SetLowPowerModeCoreLDORegulatorDriveStrength(SPC_Type *base, spc_core_ldo_drive_strength_t driveStrength); + +/*! + * @brief Gets CORE LDO VDD Drive Strength for Low Power modes. + * + * @param base SPC peripheral base address. + * @return The CORE LDO's VDD Drive Strength. + */ +static inline spc_core_ldo_drive_strength_t SPC_GetLowPowerCoreLDOVDDDriveStrength(SPC_Type *base) +{ + return (spc_core_ldo_drive_strength_t)(uint32_t)((base->LP_CFG & SPC_LP_CFG_CORELDO_VDD_DS_MASK) >> + SPC_LP_CFG_CORELDO_VDD_DS_SHIFT); +} + +#if (defined(FSL_FEATURE_MCX_SPC_HAS_SYS_LDO) && FSL_FEATURE_MCX_SPC_HAS_SYS_LDO) +/*! + * @name Low Level APIs To Set System LDO Regulator + * @{ + */ + +/*! + * @brief Enable/Disable System LDO regulator. + * + * @note The SYSTEM LDO enable bit is write-once. + * + * @param base SPC peripheral base address. + * @param enable Enable/Disable System LDO Regulator. + * true - Enable System LDO Regulator. + * false - Disable System LDO Regulator. + */ +static inline void SPC_EnableSystemLDORegulator(SPC_Type *base, bool enable) +{ + if (enable) + { + base->CNTRL |= SPC_CNTRL_SYSLDO_EN_MASK; + } + else + { + /* + * $Branch Coverage Justification$ + * If SYSTEM_LDO is disabled, may cause some unexpected issues. + */ + base->CNTRL &= ~SPC_CNTRL_SYSLDO_EN_MASK; + } +} + +/*! + * @brief Enable/Disable current sink feature of System LDO Regulator. + * + * @param base SPC peripheral base address. + * @param sink Enable/Disable current sink feature. + * true - Enable current sink feature of System LDO Regulator. + * false - Disable current sink feature of System LDO Regulator. + */ +static inline void SPC_EnableSystemLDOSinkFeature(SPC_Type *base, bool sink) +{ + if (sink) + { + base->SYSLDO_CFG |= SPC_SYSLDO_CFG_ISINKEN_MASK; + } + else + { + base->SYSLDO_CFG &= ~SPC_SYSLDO_CFG_ISINKEN_MASK; + } +} + +/*! + * @brief Configs System LDO VDD Regulator in Active mode. + * + * @note If System LDO VDD Drive Strength is set to Normal, the Bandgap mode in Active mode must be programmed + * to a value that enables the bandgap. + * @note If any voltage detects are kept enabled, configuration to set System LDO VDD drive strength to low will + * be ignored. + * @note If select System LDO VDD Regulator voltage level to Over Drive Voltage, the Drive Strength of System LDO VDD + * Regulator must be set to Normal otherwise the regulator Drive Strength will be forced to Normal. + * @note If select System LDO VDD Regulator voltage level to Over Drive Voltage, the High voltage detect must be + * disabled. Otherwise it will be fail to regulator to Over Drive Voltage. + * + * @param base SPC peripheral base address. + * @param option Pointer to the spc_active_mode_sys_ldo_option_t structure. + * + * @retval #kStatus_Success Config System LDO regulator in Active power mode successful. + * @retval #kStatus_SPC_Busy The SPC instance is busy to execute any type of power mode transition. + * @retval #kStatus_SPC_BandgapModeWrong The bandgap is not enabled before invoking this function. + * @retval #kStatus_SPC_SYSLDOOverDriveVoltageFail HVD of System VDD is not disable before setting to Over Drive + * voltage. + * @retval kStatus_SPC_SYSLDOLowDriveStrengthIgnore Set System LDO VDD regulator's driver strength to Low will be + * ignored. + */ +status_t SPC_SetActiveModeSystemLDORegulatorConfig(SPC_Type *base, const spc_active_mode_sys_ldo_option_t *option); + +/*! + * @brief Set System LDO Regulator voltage level in Active mode. + * + * @note The system LDO regulator can only operate at the overdrive voltage level for a limited amount of time for the + * life of chip. + * + * @param base SPC peripheral base address. + * @param voltageLevel Specify the voltage level of System LDO Regulator in Active mode. + * + * @retval #kStatus_Success Set System LDO Regulator voltage level in Active mode successfully. + * @retval #kStatus_SPC_SYSLDOOverDriveVoltageFail Must disable system LDO high voltage detector before specifing + * overdrive voltage. + */ +status_t SPC_SetActiveModeSystemLDORegulatorVoltageLevel(SPC_Type *base, spc_sys_ldo_voltage_level_t voltageLevel); + +/*! + * @brief Get System LDO Regulator voltage level in Active mode. + * + * @param base SPC peripheral base address. + * @return System LDO Regulator voltage level in Active mode, please refer to @ref spc_sys_ldo_voltage_level_t. + */ +static inline spc_sys_ldo_voltage_level_t SPC_GetActiveModeSystemLDORegulatorVoltageLevel(SPC_Type *base) +{ + return (spc_sys_ldo_voltage_level_t)(uint32_t)((base->ACTIVE_CFG & SPC_ACTIVE_CFG_SYSLDO_VDD_LVL_MASK) >> + SPC_ACTIVE_CFG_SYSLDO_VDD_LVL_SHIFT); +} + +/*! + * @brief Set System LDO Regulator Drive Strength in Active mode. + * + * @param base SPC peripheral base address. + * @param driveStrength Specify the drive strength of System LDO Regulator in Active mode. + * + * @retval #kStatus_Success Set System LDO Regulator drive strength in Active mode successfully. + * @retval #kStatus_SPC_SYSLDOLowDriveStrengthIgnore Attempt to specify low drive strength is ignored due to any + voltage detect feature is enabled in active mode. + * @retval #kStatus_SPC_BandgapModeWrong Bandgap mode in Active mode must be programmed to a value that enables + the bandgap if attempt to specify normal drive strength. + */ +status_t SPC_SetActiveModeSystemLDORegulatorDriveStrength(SPC_Type *base, spc_sys_ldo_drive_strength_t driveStrength); + +/*! + * @brief Get System LDO Regulator Drive Strength in Active mode. + * + * @param base SPC peripheral base address. + * @return System LDO regulator drive strength in Active mode, please refer to @ref spc_sys_ldo_drive_strength_t. + */ +static inline spc_sys_ldo_drive_strength_t SPC_GetActiveModeSystemLDORegulatorDriveStrength(SPC_Type *base) +{ + return (spc_sys_ldo_drive_strength_t)(uint32_t)((base->ACTIVE_CFG & SPC_ACTIVE_CFG_SYSLDO_VDD_DS_MASK) >> + SPC_ACTIVE_CFG_SYSLDO_VDD_DS_SHIFT); +} + +/*! + * @brief Configs System LDO regulator in low power modes. + * + * This function configs System LDO regulator in low power modes. + * If System LDO VDD Regulator Drive strength is set to normal, bandgap mode in low power + * mode must be programmed to a value that enables the Bandgap. + * If any High voltage detectors or Low Voltage detectors are kept enabled, configuration + * to set System LDO Regulator drive strength as Low will be ignored. + * + * @param base SPC peripheral base address. + * @param option Pointer to spc_lowpower_mode_sys_ldo_option_t structure. + * + * @retval #kStatus_Success Config System LDO regulator in Low Power Mode successfully. + * @retval #kStatus_SPC_Busy The SPC instance is busy to execute any type of power mode transition. + * @retval #kStatus_SPC_SYSLDOLowDriveStrengthIgnore Set driver strength to low will be ignored. + */ +status_t SPC_SetLowPowerModeSystemLDORegulatorConfig(SPC_Type *base, const spc_lowpower_mode_sys_ldo_option_t *option); + +/*! + * @brief Set System LDO Regulator drive strength in Low Power Mode. + * + * @param base SPC peripheral base address. + * @param driveStrength Specify the drive strength of System LDO Regulator in Low Power Mode. + * + * @retval #kStatus_Success Set System LDO Regulator drive strength in Low Power Mode successfully. + * @retval #kStatus_SPC_SYSLDOLowDriveStrengthIgnore Attempt to specify low drive strength is ignored due to any + voltage detect feature is enabled in low power mode. + * @retval #kStatus_SPC_BandgapModeWrong Bandgap mode in low power mode must be programmed to a value that enables + the bandgap if attempt to specify normal drive strength. + */ +status_t SPC_SetLowPowerModeSystemLDORegulatorDriveStrength(SPC_Type *base, spc_sys_ldo_drive_strength_t driveStrength); + +/*! + * @brief Get System LDO Regulator drive strength in Low Power Mode. + * + * @param base SPC peripheral base address. + * @return System LDO regulator drive strength in Low Power Mode, please refer to @ref spc_sys_ldo_drive_strength_t. + */ +static inline spc_sys_ldo_drive_strength_t SPC_GetLowPowerModeSystemLDORegulatorDriveStrength(SPC_Type *base) +{ + return (spc_sys_ldo_drive_strength_t)(uint32_t)((base->LP_CFG & SPC_LP_CFG_SYSLDO_VDD_DS_MASK) >> + SPC_LP_CFG_SYSLDO_VDD_DS_SHIFT); +} +/*! @} */ +#endif /* FSL_FEATURE_MCX_SPC_HAS_SYS_LDO */ + +#if (defined(FSL_FEATURE_MCX_SPC_HAS_DCDC) && FSL_FEATURE_MCX_SPC_HAS_DCDC) +/*! + * @name Low Level APIs To Set DCDC Regulator + * @{ + */ + +/*! + * @brief Enable/Disable DCDC Regulator. + * + * @note The DCDC enable bit is write-once, settings only reset after a POR, LVD, or HVD event. + * + * @param base SPC peripheral base address. + * @param enable Enable/Disable DCDC Regulator. + * true - Enable DCDC Regulator. + * false - Disable DCDC Regulator. + */ +static inline void SPC_EnableDCDCRegulator(SPC_Type *base, bool enable) +{ + if (enable) + { + base->CNTRL |= SPC_CNTRL_DCDC_EN_MASK; + } + else + { + /* + * $Branch Coverage Justification$ + * If DCDC is disabled, all RAMs data will powered off. + */ + base->CNTRL &= ~SPC_CNTRL_DCDC_EN_MASK; + } +} + +/*! + * @brief Config DCDC Burst options + * + * @param base SPC peripheral base address. + * @param config Pointer to spc_dcdc_burst_config_t structure. + */ +void SPC_SetDCDCBurstConfig(SPC_Type *base, spc_dcdc_burst_config_t *config); + +/*! + * @brief Trigger a software burst request to DCDC. + * + * @param base SPC peripheral base address. + */ +static inline void SPC_TriggerDCDCBurstRequest(SPC_Type *base) +{ + /* Blocking until previous DCDC burst completed. */ + while ((base->DCDC_BURST_CFG & SPC_DCDC_BURST_CFG_BURST_ACK_MASK) == 0UL) + { + } + + base->DCDC_BURST_CFG |= SPC_DCDC_BURST_CFG_BURST_REQ_MASK; +} + +/*! + * @brief Check if burst acknowlege flag is asserted. + * + * @param base SPC peripheral base address. + * + * @retval false DCDC burst not complete. + * @retval true DCDC burst complete. + */ +static inline bool SPC_CheckDCDCBurstAck(SPC_Type *base) +{ + return ((base->DCDC_BURST_CFG & SPC_DCDC_BURST_CFG_BURST_ACK_MASK) != 0UL); +} + +/*! + * @brief Clear DCDC busrt acknowledge flag. + * + * @param base SPC periphral base address. + */ +static inline void SPC_ClearDCDCBurstAckFlag(SPC_Type *base) +{ + base->DCDC_BURST_CFG |= SPC_DCDC_BURST_CFG_BURST_ACK_MASK; +} + +/*! + * @brief Set the count value of the reference clock to configure the period of DCDC not active. + * + * @note This function is only useful when DCDC's drive strength is set as pulse refresh. + * @note The pulse duration(time between on and off) is: reference clock period * (count + 2). + * + * @param base SPC peripheral base address. + * @param count The count value, 16 bit width. + */ +void SPC_SetDCDCRefreshCount(SPC_Type *base, uint16_t count); + +#if (defined(FSL_FEATURE_MCX_SPC_HAS_DCDC_CFG_BLEED_EN) && FSL_FEATURE_MCX_SPC_HAS_DCDC_CFG_BLEED_EN) +/*! + * @brief Enable a bleed resistor to discharge DCDC output when DCDC is disabled. + * + * @param base SPC peripheral base address. + * @param enable Used to enable/disable bleed resistor. + */ +static inline void SPC_EnableDCDCBleedResistor(SPC_Type *base, bool enable) +{ + if (enable) + { + base->DCDC_CFG |= SPC_DCDC_CFG_BLEED_EN_MASK; + } + else + { + base->DCDC_CFG &= ~SPC_DCDC_CFG_BLEED_EN_MASK; + } +} +#endif /* FSL_FEATURE_MCX_SPC_HAS_DCDC_CFG_BLEED_EN */ + +/*! + * @brief Configs DCDC_CORE Regulator in Active mode. + * + * @note When changing the DCDC output voltage level, take care to change the CORE LDO voltage level. + * + * @param base SPC peripheral base address. + * @param option Pointer to the spc_active_mode_dcdc_option_t structure. + * + * @retval #kStatus_Success Config DCDC regulator in Active power mode successful. + * @retval #kStatus_SPC_Busy The SPC instance is busy to execute any type of power mode transition. + * @retval #kStatus_SPC_BandgapModeWrong Set DCDC_CORE Regulator drive strength to Normal, the Bandgap must be enabled. + */ +status_t SPC_SetActiveModeDCDCRegulatorConfig(SPC_Type *base, const spc_active_mode_dcdc_option_t *option); + +/*! + * @brief Set DCDC_CORE Regulator voltage level in Active mode. + * + * @note When changing the DCDC output voltage level, take care to change the CORE LDO voltage level. + * + * @param base SPC peripheral base address. + * @param voltageLevel Specify the DCDC_CORE Regulator voltage level, please refer to @ref spc_dcdc_voltage_level_t. + */ +static inline void SPC_SetActiveModeDCDCRegulatorVoltageLevel(SPC_Type *base, spc_dcdc_voltage_level_t voltageLevel) +{ + base->ACTIVE_CFG = + (base->ACTIVE_CFG & (~SPC_ACTIVE_CFG_DCDC_VDD_LVL_MASK)) | SPC_ACTIVE_CFG_DCDC_VDD_LVL(voltageLevel); +} + +/*! + * @brief Get DCDC_CORE Regulator voltage level in Active mode. + * + * @param base SPC peripheral base address. + * @return DCDC_CORE Regulator voltage level, please refer to @ref spc_dcdc_voltage_level_t. + */ +static inline spc_dcdc_voltage_level_t SPC_GetActiveModeDCDCRegulatorVoltageLevel(SPC_Type *base) +{ + return (spc_dcdc_voltage_level_t)((uint32_t)((base->ACTIVE_CFG & SPC_ACTIVE_CFG_DCDC_VDD_LVL_MASK) >> + SPC_ACTIVE_CFG_DCDC_VDD_LVL_SHIFT)); +} + +/*! + * @brief Set DCDC_CORE Regulator drive strength in Active mode. + * + * @note To set DCDC drive strength as Normal, the bandgap must be enabled. + * + * @param base SPC peripheral base address. + * @param driveStrength Specify the DCDC_CORE regulator drive strength, please refer to @ref spc_dcdc_drive_strength_t. + * + * @retval #kStatus_Success Set DCDC_CORE Regulator drive strength in Active mode successfully. + * @retval #kStatus_SPC_BandgapModeWrong Set DCDC_CORE Regulator drive strength to Normal, the Bandgap must be enabled. + */ +status_t SPC_SetActiveModeDCDCRegulatorDriveStrength(SPC_Type *base, spc_dcdc_drive_strength_t driveStrength); + +/*! + * @brief Get DCDC_CORE Regulator drive strength in Active mode. + * + * @param base SPC peripheral base address. + * @return DCDC_CORE Regulator drive strength, please refer to @ref spc_dcdc_drive_strength_t. + */ +static inline spc_dcdc_drive_strength_t SPC_GetActiveModeDCDCRegulatorDriveStrength(SPC_Type *base) +{ + return (spc_dcdc_drive_strength_t)((uint32_t)((base->ACTIVE_CFG & SPC_ACTIVE_CFG_DCDC_VDD_DS_MASK) >> + SPC_ACTIVE_CFG_DCDC_VDD_DS_SHIFT)); +} + +/*! + * @brief Configs DCDC_CORE Regulator in Low power modes. + * + * @note If DCDC_CORE Drive Strength is set to Normal, the Bandgap mode in Low Power mode must be programmed + * to a value that enables the Bandgap. + * @note In Deep Power Down mode, DCDC regulator is always turned off. + * + * @param base SPC peripheral base address. + * @param option Pointer to the spc_lowpower_mode_dcdc_option_t structure. + * + * @retval #kStatus_Success Config DCDC regulator in low power mode successfully. + * @retval #kStatus_SPC_Busy The SPC instance is busy to execute any type of power mode transition. + * @retval #kStatus_SPC_BandgapModeWrong The bandgap mode setting in Low Power mode is wrong. + */ +status_t SPC_SetLowPowerModeDCDCRegulatorConfig(SPC_Type *base, const spc_lowpower_mode_dcdc_option_t *option); + +/*! + * @brief Set DCDC_CORE Regulator drive strength in Low power mode. + * + * @note To set drive strength as normal, the bandgap must be enabled. + * + * @param base SPC peripheral base address. + * @param driveStrength Specify the DCDC_CORE Regulator drive strength, please refer to @ref spc_dcdc_drive_strength_t. + * + * @retval #kStatus_Success Set DCDC_CORE Regulator drive strength in Low power mode successfully. + * @retval #kStatus_SPC_BandgapModeWrong Set DCDC_CORE Regulator drive strength to Normal, the Bandgap must be enabled. + */ +status_t SPC_SetLowPowerModeDCDCRegulatorDriveStrength(SPC_Type *base, spc_dcdc_drive_strength_t driveStrength); + +/*! + * @brief Get DCDC_CORE Regulator drive strength in Low power mode. + * + * @param base SPC peripheral base address. + * @return DCDC_CORE Regulator drive strength, please refer to @ref spc_dcdc_drive_strength_t. + */ +static inline spc_dcdc_drive_strength_t SPC_GetLowPowerModeDCDCRegulatorDriveStrength(SPC_Type *base) +{ + return (spc_dcdc_drive_strength_t)((uint32_t)((base->LP_CFG & SPC_LP_CFG_DCDC_VDD_DS_MASK) >> + SPC_LP_CFG_DCDC_VDD_DS_SHIFT)); +} + +/*! + * @brief Set DCDC_CORE Regulator voltage level in Low power mode. + * + * @note To change DCDC level in Low-Power mode: + * 1. Configure LP_CFG[DCDC_VDD_LVL] to desired level; + * 2. Configure LP_CFG[DCDC_VDD_DS] to low driver strength; + * 3. Configure ACTIVE_CFG[DCDC_VDD_LVL] to same level programmed in #1. + * + * @note After invoking this function, the voltage level in active mode(wakeup from low power modes) also changed, + * if it is necessary, please invoke SPC_SetActiveModeDCDCRegulatorVoltageLevel() to change to desried voltage level. + * + * @param base SPC peripheral base address. + * @param voltageLevel Specify the DCDC_CORE Regulator voltage level, please refer to @ref spc_dcdc_voltage_level_t. + */ +static inline void SPC_SetLowPowerModeDCDCRegulatorVoltageLevel(SPC_Type *base, spc_dcdc_voltage_level_t voltageLevel) +{ + base->LP_CFG = (base->LP_CFG & (~SPC_LP_CFG_DCDC_VDD_LVL_MASK)) | SPC_LP_CFG_DCDC_VDD_LVL(voltageLevel); + (void)SPC_SetLowPowerModeDCDCRegulatorDriveStrength(base, kSPC_DCDC_LowDriveStrength); + SPC_SetActiveModeDCDCRegulatorVoltageLevel(base, voltageLevel); +} + +/*! + * @brief Get DCDC_CORE Regulator voltage level in Low power mode. + * + * @param base SPC peripheral base address. + * @return DCDC_CORE Regulator voltage level, please refer to @ref spc_dcdc_voltage_level_t. + */ +static inline spc_dcdc_voltage_level_t SPC_GetLowPowerModeDCDCRegulatorVoltageLevel(SPC_Type *base) +{ + return (spc_dcdc_voltage_level_t)((uint32_t)((base->LP_CFG & SPC_LP_CFG_DCDC_VDD_LVL_MASK) >> + SPC_LP_CFG_DCDC_VDD_LVL_SHIFT)); +} + +/*! @} */ +#endif /* FSL_FEATURE_MCX_SPC_HAS_DCDC */ + +#if defined(__cplusplus) +} +#endif /* __cplusplus */ + +/*! @} */ + +#endif /* FSL_SPC_H_ */ diff --git a/hw/bsp/mcx/family.c b/hw/bsp/mcx/family.c index 2b9c60beb..2dfefeb92 100644 --- a/hw/bsp/mcx/family.c +++ b/hw/bsp/mcx/family.c @@ -60,9 +60,14 @@ void USB0_IRQHandler(void) { void board_init(void) { + BOARD_InitPins(); + BOARD_InitBootClocks(); + + #ifdef XTAL0_CLK_HZ CLOCK_SetupExtClocking(XTAL0_CLK_HZ); + #endif #if CFG_TUSB_OS == OPT_OS_NONE // 1ms tick timer @@ -84,15 +89,7 @@ void board_init(void) { board_led_write(0); #ifdef NEOPIXEL_PIN - // Neopixel - static uint32_t pixelData[NEOPIXEL_NUMBER]; - IOCON_PinMuxSet(IOCON, NEOPIXEL_PORT, NEOPIXEL_PIN, IOCON_PIO_DIG_FUNC4_EN); - - sctpix_init(NEOPIXEL_TYPE); - sctpix_addCh(NEOPIXEL_CH, pixelData, NEOPIXEL_NUMBER); - sctpix_setPixel(NEOPIXEL_CH, 0, 0x100010); - sctpix_setPixel(NEOPIXEL_CH, 1, 0x100010); - sctpix_show(); + // No neo pixel support yet #endif // Button @@ -103,9 +100,6 @@ void board_init(void) { #endif #ifdef UART_DEV - // UART -// IOCON_PinMuxSet(IOCON, UART_RX_PINMUX); -// IOCON_PinMuxSet(IOCON, UART_TX_PINMUX); // Enable UART when debug log is on board_uart_init_clock(); @@ -115,6 +109,7 @@ void board_init(void) { uart_config.baudRate_Bps = CFG_BOARD_UART_BAUDRATE; uart_config.enableTx = true; uart_config.enableRx = true; + LPUART_Init(UART_DEV, &uart_config, 12000000u); #endif @@ -196,17 +191,6 @@ void board_init(void) { void board_led_write(bool state) { GPIO_PinWrite(LED_GPIO, LED_PIN, state ? LED_STATE_ON : (1 - LED_STATE_ON)); - -#ifdef NEOPIXEL_PIN - if (state) { - sctpix_setPixel(NEOPIXEL_CH, 0, 0x100000); - sctpix_setPixel(NEOPIXEL_CH, 1, 0x101010); - } else { - sctpix_setPixel(NEOPIXEL_CH, 0, 0x001000); - sctpix_setPixel(NEOPIXEL_CH, 1, 0x000010); - } - sctpix_show(); -#endif } uint32_t board_button_read(void) { diff --git a/hw/bsp/mcx/family.cmake b/hw/bsp/mcx/family.cmake index 413c1b372..305497b79 100644 --- a/hw/bsp/mcx/family.cmake +++ b/hw/bsp/mcx/family.cmake @@ -10,6 +10,9 @@ include(${CMAKE_CURRENT_LIST_DIR}/boards/${BOARD}/board.cmake) if (MCU_VARIANT STREQUAL "MCXA153") set(CMAKE_SYSTEM_CPU cortex-m33-nodsp-nofp CACHE INTERNAL "System Processor") set(FAMILY_MCUS MCXA15 CACHE INTERNAL "") +elseif (MCU_VARIANT STREQUAL "MCXA156") + set(CMAKE_SYSTEM_PROCESSOR cortex-m33 CACHE INTERNAL "System Processor") + set(FAMILY_MCUS MCXA15 CACHE INTERNAL "") elseif (MCU_VARIANT STREQUAL "MCXN947") set(CMAKE_SYSTEM_CPU cortex-m33 CACHE INTERNAL "System Processor") set(FAMILY_MCUS MCXN9 CACHE INTERNAL "") @@ -38,12 +41,14 @@ function(add_board_target BOARD_TARGET) endif() set(STARTUP_FILE_Clang ${STARTUP_FILE_GNU}) + add_library(${BOARD_TARGET} STATIC ${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} # driver - ${SDK_DIR}/devices/${MCU_VARIANT}/drivers/fsl_gpio.c - ${SDK_DIR}/devices/${MCU_VARIANT}/drivers/fsl_common_arm.c - ${SDK_DIR}/devices/${MCU_VARIANT}/drivers/fsl_lpuart.c + ${SDK_DIR}/drivers/gpio/fsl_gpio.c + ${SDK_DIR}/drivers/common/fsl_common_arm.c + ${SDK_DIR}/drivers/lpuart/fsl_lpuart.c + ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/drivers/spc/fsl_spc.c # mcu ${SDK_DIR}/devices/${MCU_VARIANT}/drivers/fsl_clock.c ${SDK_DIR}/devices/${MCU_VARIANT}/drivers/fsl_reset.c @@ -51,18 +56,27 @@ function(add_board_target BOARD_TARGET) ) target_include_directories(${BOARD_TARGET} PUBLIC ${CMSIS_DIR}/CMSIS/Core/Include + ${SDK_DIR}/drivers/gpio/ + ${SDK_DIR}/drivers/lpuart + ${SDK_DIR}/drivers/common + ${SDK_DIR}/drivers/port + ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/drivers/spc ${SDK_DIR}/devices/${MCU_VARIANT} ${SDK_DIR}/devices/${MCU_VARIANT}/drivers ) if (${FAMILY_MCUS} STREQUAL "MCXN9") + target_sources(${BOARD_TARGET} PRIVATE - ${SDK_DIR}/devices/${MCU_VARIANT}/drivers/fsl_lpflexcomm.c + ${SDK_DIR}/drivers/lpflexcomm/fsl_lpflexcomm.c + ) + + target_include_directories(${BOARD_TARGET} PUBLIC + ${SDK_DIR}/drivers/lpflexcomm ) elseif(${FAMILY_MCUS} STREQUAL "MCXA15") - target_sources(${BOARD_TARGET} PRIVATE - ${SDK_DIR}/devices/${MCU_VARIANT}/drivers/fsl_spc.c - ) + + endif() update_board(${BOARD_TARGET}) diff --git a/hw/bsp/mcx/family.mk b/hw/bsp/mcx/family.mk index 58149fb8d..676475cc9 100644 --- a/hw/bsp/mcx/family.mk +++ b/hw/bsp/mcx/family.mk @@ -35,18 +35,19 @@ SRC_C += \ $(SDK_DIR)/devices/$(MCU_VARIANT)/system_$(MCU_CORE).c \ $(SDK_DIR)/devices/$(MCU_VARIANT)/drivers/fsl_clock.c \ $(SDK_DIR)/devices/$(MCU_VARIANT)/drivers/fsl_reset.c \ - $(SDK_DIR)/devices/$(MCU_VARIANT)/drivers/fsl_gpio.c \ - $(SDK_DIR)/devices/$(MCU_VARIANT)/drivers/fsl_lpuart.c \ - $(SDK_DIR)/devices/$(MCU_VARIANT)/drivers/fsl_common_arm.c \ + ${SDK_DIR}/drivers/gpio/fsl_gpio.c \ + ${SDK_DIR}/drivers/lpuart/fsl_lpuart.c \ + ${SDK_DIR}/drivers/common/fsl_common_arm.c\ + hw/bsp/mcx/drivers/spc/fsl_spc.c # fsl_lpflexcomm for MCXN9 ifeq ($(MCU_VARIANT), MCXN947) - SRC_C += $(SDK_DIR)/devices/$(MCU_VARIANT)/drivers/fsl_lpflexcomm.c + SRC_C += ${SDK_DIR}/drivers/lpflexcomm/fsl_lpflexcomm.c endif # fsl_spc for MCXNA15 ifeq ($(MCU_VARIANT), MCXA153) - SRC_C += $(SDK_DIR)/devices/$(MCU_VARIANT)/drivers/fsl_spc.c + endif INC += \ @@ -54,5 +55,15 @@ INC += \ $(TOP)/lib/CMSIS_5/CMSIS/Core/Include \ $(TOP)/$(SDK_DIR)/devices/$(MCU_VARIANT) \ $(TOP)/$(SDK_DIR)/devices/$(MCU_VARIANT)/drivers \ + $(TOP)/$(SDK_DIR)/drivers/ \ + $(TOP)/$(SDK_DIR)/drivers/lpuart \ + $(TOP)/$(SDK_DIR)/drivers/lpflexcomm \ + $(TOP)/$(SDK_DIR)/drivers/common\ + $(TOP)/$(SDK_DIR)/drivers/gpio\ + $(TOP)/$(SDK_DIR)/drivers/port\ + $(TOP)/hw/bsp/mcx/drivers/spc + + + SRC_S += $(SDK_DIR)/devices/$(MCU_VARIANT)/gcc/startup_$(MCU_CORE).S diff --git a/tools/get_deps.py b/tools/get_deps.py index ba9dc23ce..f5164f31c 100755 --- a/tools/get_deps.py +++ b/tools/get_deps.py @@ -55,8 +55,8 @@ deps_optional = { 'hw/mcu/nxp/lpcopen': ['https://github.com/hathach/nxp_lpcopen.git', 'b41cf930e65c734d8ec6de04f1d57d46787c76ae', 'lpc11 lpc13 lpc15 lpc17 lpc18 lpc40 lpc43'], - 'hw/mcu/nxp/mcux-sdk': ['https://github.com/hathach/mcux-sdk.git', - '144f1eb7ea8c06512e12f12b27383601c0272410', + 'hw/mcu/nxp/mcux-sdk': ['https://github.com/nxp-mcuxpresso/mcux-sdk', + 'a1bdae309a14ec95a4f64a96d3315a4f89c397c6', 'kinetis_k kinetis_k32l2 kinetis_kl lpc51 lpc54 lpc55 mcx imxrt'], 'hw/mcu/raspberry_pi/Pico-PIO-USB': ['https://github.com/hathach/Pico-PIO-USB.git', '810653f66adadba3e0e4b4b56d5167ac4f7fdbf7', @@ -243,11 +243,13 @@ def get_a_dep(d): p.mkdir(parents=True) run_cmd(f"{git_cmd} init") run_cmd(f"{git_cmd} remote add origin {url}") + head = None + else: + # Check if commit is already fetched + result = run_cmd(f"{git_cmd} rev-parse HEAD") + head = result.stdout.decode("utf-8").splitlines()[0] + run_cmd(f"{git_cmd} reset --hard") - # Check if commit is already fetched - result = run_cmd(f"{git_cmd} rev-parse HEAD") - head = result.stdout.decode("utf-8").splitlines()[0] - run_cmd(f"{git_cmd} reset --hard") if commit != head: run_cmd(f"{git_cmd} fetch --depth 1 origin {commit}") run_cmd(f"{git_cmd} checkout FETCH_HEAD") -- cgit v1.3.1 From ed087b9ed83814e81d303c956de1541e9a82bb47 Mon Sep 17 00:00:00 2001 From: hathach Date: Tue, 13 May 2025 16:13:50 +0700 Subject: pump up pico-pio-usb and cmsis_device_wb --- tools/get_deps.py | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'tools') diff --git a/tools/get_deps.py b/tools/get_deps.py index d89c1b2b1..1f46a8e05 100755 --- a/tools/get_deps.py +++ b/tools/get_deps.py @@ -59,7 +59,7 @@ deps_optional = { '144f1eb7ea8c06512e12f12b27383601c0272410', 'kinetis_k kinetis_k32l2 kinetis_kl lpc51 lpc54 lpc55 mcx imxrt'], 'hw/mcu/raspberry_pi/Pico-PIO-USB': ['https://github.com/hathach/Pico-PIO-USB.git', - '810653f66adadba3e0e4b4b56d5167ac4f7fdbf7', + 'd15f0c62ac22348a8708e1626525fdba9466e1ee', 'rp2040'], 'hw/mcu/renesas/fsp': ['https://github.com/renesas/fsp.git', 'edcc97d684b6f716728a60d7a6fea049d9870bd6', @@ -122,7 +122,7 @@ deps_optional = { '5ad9797c54ec3e55eff770fc9b3cd4a1aefc1309', 'stm32u5'], 'hw/mcu/st/cmsis_device_wb': ['https://github.com/STMicroelectronics/cmsis_device_wb.git', - '9c5d1920dd9fabbe2548e10561d63db829bb744f', + 'd6a7fa2e7de084f5e5e47f2ab88b022fe9b50e5a', 'stm32wb'], 'hw/mcu/st/stm32-mfxstm32l152': ['https://github.com/STMicroelectronics/stm32-mfxstm32l152.git', '7f4389efee9c6a655b55e5df3fceef5586b35f9b', -- cgit v1.3.1 From 38e5a67461cf7c819e845a110ef67184c2becbe4 Mon Sep 17 00:00:00 2001 From: hathach Date: Thu, 15 May 2025 10:27:00 +0700 Subject: bump up pio-usb and codeql version --- .github/workflows/codeql.yml | 6 +++--- tools/get_deps.py | 2 +- 2 files changed, 4 insertions(+), 4 deletions(-) (limited to 'tools') diff --git a/.github/workflows/codeql.yml b/.github/workflows/codeql.yml index be4c2dd87..a22c65c79 100644 --- a/.github/workflows/codeql.yml +++ b/.github/workflows/codeql.yml @@ -66,7 +66,7 @@ jobs: # Initializes the CodeQL tools for scanning. - name: Initialize CodeQL - uses: github/codeql-action/init@v2 + uses: github/codeql-action/init@v3 with: languages: ${{ matrix.language }} # If you wish to specify custom queries, you can do so here or in a config file. @@ -93,7 +93,7 @@ jobs: ./.github/workflows/codeql-buildscript.sh - name: Perform CodeQL Analysis - uses: github/codeql-action/analyze@v2 + uses: github/codeql-action/analyze@v3 with: category: "/language:${{matrix.language}}" upload: false @@ -129,7 +129,7 @@ jobs: sarif_file: ${{ steps.step1.outputs.sarif-output }} category: "/language:${{matrix.language}}" - - name: Archive CodeQL results + - name: Upload CodeQL results as an artifact uses: actions/upload-artifact@v4 with: name: codeql-results diff --git a/tools/get_deps.py b/tools/get_deps.py index 1f46a8e05..df8dbb6e1 100755 --- a/tools/get_deps.py +++ b/tools/get_deps.py @@ -59,7 +59,7 @@ deps_optional = { '144f1eb7ea8c06512e12f12b27383601c0272410', 'kinetis_k kinetis_k32l2 kinetis_kl lpc51 lpc54 lpc55 mcx imxrt'], 'hw/mcu/raspberry_pi/Pico-PIO-USB': ['https://github.com/hathach/Pico-PIO-USB.git', - 'd15f0c62ac22348a8708e1626525fdba9466e1ee', + '032a469e79f6a4ba40760d7868e6db26e15002d7', 'rp2040'], 'hw/mcu/renesas/fsp': ['https://github.com/renesas/fsp.git', 'edcc97d684b6f716728a60d7a6fea049d9870bd6', -- cgit v1.3.1 From bffe5d97cc2f4f5a9ba8b4f09d30be97ce70a3de Mon Sep 17 00:00:00 2001 From: hathach Date: Mon, 19 May 2025 20:22:29 +0700 Subject: limit hil-hfp iar build to 4 parallel jobs --- .github/workflows/build.yml | 2 +- tools/build.py | 12 ++++++++++-- 2 files changed, 11 insertions(+), 3 deletions(-) (limited to 'tools') diff --git a/.github/workflows/build.yml b/.github/workflows/build.yml index 28447cc80..fe2ed61c9 100644 --- a/.github/workflows/build.yml +++ b/.github/workflows/build.yml @@ -266,7 +266,7 @@ jobs: run: python3 tools/get_deps.py $BUILD_ARGS - name: Build - run: python3 tools/build.py --toolchain iar $BUILD_ARGS + run: python3 tools/build.py -j 4 --toolchain iar $BUILD_ARGS - name: Test on actual hardware (hardware in the loop) run: python3 test/hil/hil_test.py hfp.json diff --git a/tools/build.py b/tools/build.py index d28ddd929..f2f6e6228 100755 --- a/tools/build.py +++ b/tools/build.py @@ -23,6 +23,7 @@ build_separator = '-' * 95 build_status = [STATUS_OK, STATUS_FAILED, STATUS_SKIPPED] verbose = False +parallel_jobs = os.cpu_count() # ----------------------------- # Helper @@ -110,13 +111,17 @@ def cmake_board(board, toolchain, build_flags_on): f'-DTOOLCHAIN={toolchain} {build_flags}') if rcmd.returncode == 0: cmd = f"cmake --build {build_dir}" - # circleci docker return $nproc as 36 core, limit parallel according to resource class. Required for IAR, also prevent crashed/killed by docker + njobs = parallel_jobs + + # circleci docker return $nproc as 36 core, limit parallel according to resource class. + # Required for IAR, also prevent crashed/killed by docker if os.getenv('CIRCLECI'): resource_class = { 'small': 1, 'medium': 2, 'medium+': 3, 'large': 4 } for rc in resource_class: if rc in os.getenv('CIRCLE_JOB'): - cmd += f' --parallel {resource_class[rc]}' + njobs = resource_class[rc] break + cmd += f' --parallel {njobs}' rcmd = run_cmd(cmd) ret[0 if rcmd.returncode == 0 else 1] += 1 @@ -211,6 +216,7 @@ def build_family(family, toolchain, build_system, build_flags_on, one_per_family # ----------------------------- def main(): global verbose + global parallel_jobs parser = argparse.ArgumentParser() parser.add_argument('families', nargs='*', default=[], help='Families to build') @@ -219,6 +225,7 @@ def main(): parser.add_argument('-s', '--build-system', default='cmake', help='Build system to use, default is cmake') parser.add_argument('-f1', '--build-flags-on', action='append', default=[], help='Build flag to pass to build system') parser.add_argument('-1', '--one-per-family', action='store_true', default=False, help='Build only one random board inside a family') + parser.add_argument('-j', '--jobs', type=int, default=os.cpu_count(), help='Number of jobs to run in parallel') parser.add_argument('-v', '--verbose', action='store_true', help='Verbose output') args = parser.parse_args() @@ -229,6 +236,7 @@ def main(): build_flags_on = args.build_flags_on one_per_family = args.one_per_family verbose = args.verbose + parallel_jobs = args.jobs if len(families) == 0 and len(boards) == 0: print("Please specify families or board to build") -- cgit v1.3.1 From 132c55aca0aa9bb68b4ffb96ec89947e08e19b88 Mon Sep 17 00:00:00 2001 From: hathach Date: Wed, 28 May 2025 08:38:26 +0700 Subject: add OPT_MCU_MAX32665 --- .github/workflows/codeql.yml | 2 +- src/CMakeLists.txt | 5 +---- src/tusb_option.h | 1 + tools/build.py | 4 ++-- 4 files changed, 5 insertions(+), 7 deletions(-) (limited to 'tools') diff --git a/.github/workflows/codeql.yml b/.github/workflows/codeql.yml index a22c65c79..dfcca6315 100644 --- a/.github/workflows/codeql.yml +++ b/.github/workflows/codeql.yml @@ -124,7 +124,7 @@ jobs: output: ${{ steps.step1.outputs.sarif-output }}/cpp.sarif - name: Upload SARIF - uses: github/codeql-action/upload-sarif@v2 + uses: github/codeql-action/upload-sarif@v3 with: sarif_file: ${{ steps.step1.outputs.sarif-output }} category: "/language:${{matrix.language}}" diff --git a/src/CMakeLists.txt b/src/CMakeLists.txt index 55c52033c..99d3059fc 100644 --- a/src/CMakeLists.txt +++ b/src/CMakeLists.txt @@ -1,9 +1,6 @@ -# TODO more docs and example on how to use this file -# TINYUSB_TARGET_PREFIX and TINYUSB_TARGET_SUFFIX can be used to change the name of the target - cmake_minimum_required(VERSION 3.20) -# Add tinyusb to a existing target +# Add tinyusb to a existing target, DCD and HCD drivers are not included function(tinyusb_target_add TARGET) target_sources(${TARGET} PRIVATE # common diff --git a/src/tusb_option.h b/src/tusb_option.h index 6d733a429..104f669c9 100644 --- a/src/tusb_option.h +++ b/src/tusb_option.h @@ -195,6 +195,7 @@ // Analog Devices #define OPT_MCU_MAX32690 2400 ///< ADI MAX32690 +#define OPT_MCU_MAX32665 2401 ///< ADI MAX32666/5 #define OPT_MCU_MAX32666 2401 ///< ADI MAX32666/5 #define OPT_MCU_MAX32650 2402 ///< ADI MAX32650/1/2 #define OPT_MCU_MAX78002 2403 ///< ADI MAX78002 diff --git a/tools/build.py b/tools/build.py index f2f6e6228..6e73681fe 100755 --- a/tools/build.py +++ b/tools/build.py @@ -101,13 +101,13 @@ def cmake_board(board, toolchain, build_flags_on): if build_utils.skip_example(example, board): ret[2] += 1 else: - rcmd = run_cmd(f'cmake examples/{example} -B {build_dir}/{example} -G "Ninja" ' + rcmd = run_cmd(f'cmake examples/{example} -B {build_dir}/{example} -G Ninja ' f'-DBOARD={board} {build_flags}') if rcmd.returncode == 0: rcmd = run_cmd(f'cmake --build {build_dir}/{example}') ret[0 if rcmd.returncode == 0 else 1] += 1 else: - rcmd = run_cmd(f'cmake examples -B {build_dir} -G "Ninja" -DBOARD={board} -DCMAKE_BUILD_TYPE=MinSizeRel ' + rcmd = run_cmd(f'cmake examples -B {build_dir} -G Ninja -DBOARD={board} -DCMAKE_BUILD_TYPE=MinSizeRel ' f'-DTOOLCHAIN={toolchain} {build_flags}') if rcmd.returncode == 0: cmd = f"cmake --build {build_dir}" -- cgit v1.3.1 From 56c9521abdef663b455a345c99a4f6b22591aa56 Mon Sep 17 00:00:00 2001 From: James Sandison Date: Wed, 4 Jun 2025 11:21:27 +1000 Subject: chore: squash previous commits from other branches --- docs/reference/boards.rst | 2 + docs/reference/dependencies.rst | 1 + examples/build_system/cmake/cpu/cortex-m55.cmake | 26 + examples/build_system/make/cpu/cortex-m55.mk | 28 + examples/device/net_lwip_webserver/skip.txt | 1 + examples/host/bare_api/only.txt | 1 + examples/host/cdc_msc_hid/only.txt | 1 + examples/host/cdc_msc_hid_freertos/only.txt | 1 + examples/host/device_info/only.txt | 1 + examples/host/hid_controller/only.txt | 1 + examples/host/midi_rx/only.txt | 1 + examples/host/msc_file_explorer/only.txt | 1 + hw/bsp/stm32n6/FreeRTOSConfig/FreeRTOSConfig.h | 149 ++ .../stm32n657nucleo/STM32N657XX_AXISRAM2_fsbl.ld | 203 +++ hw/bsp/stm32n6/boards/stm32n657nucleo/board.cmake | 25 + hw/bsp/stm32n6/boards/stm32n657nucleo/board.h | 283 ++++ hw/bsp/stm32n6/boards/stm32n657nucleo/board.mk | 23 + .../boards/stm32n657nucleo/tcpp0203/LICENSE.txt | 6 + .../stm32n657nucleo/tcpp0203/Release_Notes.html | 205 +++ .../stm32n657nucleo/tcpp0203/_htmresc/favicon.png | Bin 0 -> 4126 bytes .../tcpp0203/_htmresc/mini-st_2020.css | 1703 ++++++++++++++++++++ .../tcpp0203/_htmresc/st_logo_2020.png | Bin 0 -> 7520 bytes .../boards/stm32n657nucleo/tcpp0203/tcpp0203.c | 886 ++++++++++ .../boards/stm32n657nucleo/tcpp0203/tcpp0203.h | 353 ++++ .../boards/stm32n657nucleo/tcpp0203/tcpp0203_reg.c | 73 + .../boards/stm32n657nucleo/tcpp0203/tcpp0203_reg.h | 98 ++ hw/bsp/stm32n6/family.c | 276 ++++ hw/bsp/stm32n6/family.cmake | 147 ++ hw/bsp/stm32n6/family.mk | 101 ++ hw/bsp/stm32n6/partition_stm32n657xx.h | 792 +++++++++ hw/bsp/stm32n6/stm32n6xx_hal_conf.h | 504 ++++++ hw/bsp/zephyr_board_aliases.cmake | 1 + src/common/tusb_mcu.h | 9 + src/portable/synopsys/dwc2/dcd_dwc2.c | 5 + src/portable/synopsys/dwc2/dwc2_info.py | 1 + src/portable/synopsys/dwc2/dwc2_stm32.h | 11 + src/portable/synopsys/dwc2/hcd_dwc2.c | 4 + src/tusb_option.h | 1 + tools/get_deps.py | 8 +- 39 files changed, 5931 insertions(+), 1 deletion(-) create mode 100644 examples/build_system/cmake/cpu/cortex-m55.cmake create mode 100644 examples/build_system/make/cpu/cortex-m55.mk create mode 100644 hw/bsp/stm32n6/FreeRTOSConfig/FreeRTOSConfig.h create mode 100644 hw/bsp/stm32n6/boards/stm32n657nucleo/STM32N657XX_AXISRAM2_fsbl.ld create mode 100644 hw/bsp/stm32n6/boards/stm32n657nucleo/board.cmake create mode 100644 hw/bsp/stm32n6/boards/stm32n657nucleo/board.h create mode 100644 hw/bsp/stm32n6/boards/stm32n657nucleo/board.mk create mode 100644 hw/bsp/stm32n6/boards/stm32n657nucleo/tcpp0203/LICENSE.txt create mode 100644 hw/bsp/stm32n6/boards/stm32n657nucleo/tcpp0203/Release_Notes.html create mode 100644 hw/bsp/stm32n6/boards/stm32n657nucleo/tcpp0203/_htmresc/favicon.png create mode 100644 hw/bsp/stm32n6/boards/stm32n657nucleo/tcpp0203/_htmresc/mini-st_2020.css create mode 100644 hw/bsp/stm32n6/boards/stm32n657nucleo/tcpp0203/_htmresc/st_logo_2020.png create mode 100644 hw/bsp/stm32n6/boards/stm32n657nucleo/tcpp0203/tcpp0203.c create mode 100644 hw/bsp/stm32n6/boards/stm32n657nucleo/tcpp0203/tcpp0203.h create mode 100644 hw/bsp/stm32n6/boards/stm32n657nucleo/tcpp0203/tcpp0203_reg.c create mode 100644 hw/bsp/stm32n6/boards/stm32n657nucleo/tcpp0203/tcpp0203_reg.h create mode 100644 hw/bsp/stm32n6/family.c create mode 100644 hw/bsp/stm32n6/family.cmake create mode 100644 hw/bsp/stm32n6/family.mk create mode 100644 hw/bsp/stm32n6/partition_stm32n657xx.h create mode 100644 hw/bsp/stm32n6/stm32n6xx_hal_conf.h (limited to 'tools') diff --git a/docs/reference/boards.rst b/docs/reference/boards.rst index 5786b2182..317a40c9c 100644 --- a/docs/reference/boards.rst +++ b/docs/reference/boards.rst @@ -269,6 +269,8 @@ stm32l412nucleo STM32 L412 Nucleo stm32l4 https://www.st stm32l476disco STM32 L476 Disco stm32l4 https://www.st.com/en/evaluation-tools/32l476gdiscovery.html stm32l4p5nucleo STM32 L4P5 Nucleo stm32l4 https://www.st.com/en/evaluation-tools/nucleo-l4p5zg.html stm32l4r5nucleo STM32 L4R5 Nucleo stm32l4 https://www.st.com/en/evaluation-tools/nucleo-l4r5zi.html +stm32n657_dk STM32 N657 Discovery Kit stm32n6 https://www.st.com/en/evaluation-tools/stm32n6570-dk.html +stm32n657nucleo STM32 N657 Nucleo stm32n6 https://www.st.com/en/evaluation-tools/nucleo-n657x0-q.html b_u585i_iot2a STM32 B-U585i IOT2A Discovery kit stm32u5 https://www.st.com/en/evaluation-tools/b-u585i-iot02a.html stm32u545nucleo STM32 U545 Nucleo stm32u5 https://www.st.com/en/evaluation-tools/nucleo-u545re-q.html stm32u575eval STM32 U575 Eval stm32u5 https://www.st.com/en/evaluation-tools/stm32u575i-ev.html diff --git a/docs/reference/dependencies.rst b/docs/reference/dependencies.rst index e124466da..98545b4cf 100644 --- a/docs/reference/dependencies.rst +++ b/docs/reference/dependencies.rst @@ -57,6 +57,7 @@ hw/mcu/st/stm32l0xx_hal_driver https://github.com/STMicroelectronics/ hw/mcu/st/stm32l1xx_hal_driver https://github.com/STMicroelectronics/stm32l1xx_hal_driver.git 44efc446fa69ed8344e7fd966e68ed11043b35d9 stm32l1 hw/mcu/st/stm32l4xx_hal_driver https://github.com/STMicroelectronics/stm32l4xx_hal_driver.git aee3d5bf283ae5df87532b781bdd01b7caf256fc stm32l4 hw/mcu/st/stm32l5xx_hal_driver https://github.com/STMicroelectronics/stm32l5xx_hal_driver.git 675c32a75df37f39d50d61f51cb0dcf53f07e1cb stm32l5 +hw/mcu/st/stm32n6xx_hal_driver https://github.com/STMicroelectronics/stm32n6xx-hal-driver.git 49f9989d10cf6817d4b07ac01848956b46bd0fd6 stm32n6 hw/mcu/st/stm32u5xx_hal_driver https://github.com/STMicroelectronics/stm32u5xx_hal_driver.git 4d93097a67928e9377e655ddd14622adc31b9770 stm32u5 hw/mcu/st/stm32wbxx_hal_driver https://github.com/STMicroelectronics/stm32wbxx_hal_driver.git 2c5f06638be516c1b772f768456ba637f077bac8 stm32wb hw/mcu/ti https://github.com/hathach/ti_driver.git 143ed6cc20a7615d042b03b21e070197d473e6e5 msp430 msp432e4 tm4c diff --git a/examples/build_system/cmake/cpu/cortex-m55.cmake b/examples/build_system/cmake/cpu/cortex-m55.cmake new file mode 100644 index 000000000..a7a57957c --- /dev/null +++ b/examples/build_system/cmake/cpu/cortex-m55.cmake @@ -0,0 +1,26 @@ +if (TOOLCHAIN STREQUAL "gcc") + set(TOOLCHAIN_COMMON_FLAGS + -mthumb + -mcpu=cortex-m55 + -mfloat-abi=hard + -mfpu=fpv5-d16 + -mcmse + ) + set(FREERTOS_PORT GCC_ARM_CM55_NTZ_NONSECURE CACHE INTERNAL "") + +elseif (TOOLCHAIN STREQUAL "clang") + set(TOOLCHAIN_COMMON_FLAGS + --target=arm-none-eabi + -mcpu=cortex-m55 + -mfpu=fpv5-d16 + ) + set(FREERTOS_PORT GCC_ARM_CM55_NTZ_NONSECURE CACHE INTERNAL "") + +elseif (TOOLCHAIN STREQUAL "iar") + set(TOOLCHAIN_COMMON_FLAGS + --cpu cortex-m55 + --fpu VFPv5_D16 + ) + set(FREERTOS_PORT IAR_ARM_CM55_NTZ_NONSECURE CACHE INTERNAL "") + +endif () diff --git a/examples/build_system/make/cpu/cortex-m55.mk b/examples/build_system/make/cpu/cortex-m55.mk new file mode 100644 index 000000000..de627caed --- /dev/null +++ b/examples/build_system/make/cpu/cortex-m55.mk @@ -0,0 +1,28 @@ +ifeq ($(TOOLCHAIN),gcc) + CFLAGS += \ + -mthumb \ + -mcpu=cortex-m55 \ + -mfloat-abi=hard \ + -mfpu=fpv5-d16 \ + -mcmse + +else ifeq ($(TOOLCHAIN),clang) + CFLAGS += \ + --target=arm-none-eabi \ + -mcpu=cortex-m55 \ + -mfpu=fpv5-d16 \ + +else ifeq ($(TOOLCHAIN),iar) + CFLAGS += \ + --cpu cortex-m55 \ + --fpu VFPv5_D16 \ + + ASFLAGS += \ + --cpu cortex-m55 \ + --fpu VFPv5_D16 \ + +else + $(error "TOOLCHAIN is not supported") +endif + +FREERTOS_PORTABLE_SRC ?= $(FREERTOS_PORTABLE_PATH)/ARM_CM55_NTZ/non_secure diff --git a/examples/device/net_lwip_webserver/skip.txt b/examples/device/net_lwip_webserver/skip.txt index 5ebe71612..c2e0d54ec 100644 --- a/examples/device/net_lwip_webserver/skip.txt +++ b/examples/device/net_lwip_webserver/skip.txt @@ -10,6 +10,7 @@ mcu:SAMD11 mcu:STM32L0 mcu:STM32F0 mcu:KINETIS_KL +mcu:STM32N6 family:broadcom_64bit family:broadcom_32bit family:espressif diff --git a/examples/host/bare_api/only.txt b/examples/host/bare_api/only.txt index 95f9f1d82..9b8d535e6 100644 --- a/examples/host/bare_api/only.txt +++ b/examples/host/bare_api/only.txt @@ -15,3 +15,4 @@ mcu:MAX3421 mcu:STM32F4 mcu:STM32F7 mcu:STM32H7 +mcu:STM32N6 diff --git a/examples/host/cdc_msc_hid/only.txt b/examples/host/cdc_msc_hid/only.txt index 95f9f1d82..9b8d535e6 100644 --- a/examples/host/cdc_msc_hid/only.txt +++ b/examples/host/cdc_msc_hid/only.txt @@ -15,3 +15,4 @@ mcu:MAX3421 mcu:STM32F4 mcu:STM32F7 mcu:STM32H7 +mcu:STM32N6 diff --git a/examples/host/cdc_msc_hid_freertos/only.txt b/examples/host/cdc_msc_hid_freertos/only.txt index e3ae25260..4ff3841a4 100644 --- a/examples/host/cdc_msc_hid_freertos/only.txt +++ b/examples/host/cdc_msc_hid_freertos/only.txt @@ -13,3 +13,4 @@ mcu:MAX3421 mcu:STM32F4 mcu:STM32F7 mcu:STM32H7 +mcu:STM32N6 diff --git a/examples/host/device_info/only.txt b/examples/host/device_info/only.txt index b6f87f423..6e6e2184f 100644 --- a/examples/host/device_info/only.txt +++ b/examples/host/device_info/only.txt @@ -18,3 +18,4 @@ mcu:RAXXX mcu:STM32F4 mcu:STM32F7 mcu:STM32H7 +mcu:STM32N6 diff --git a/examples/host/hid_controller/only.txt b/examples/host/hid_controller/only.txt index 95f9f1d82..9b8d535e6 100644 --- a/examples/host/hid_controller/only.txt +++ b/examples/host/hid_controller/only.txt @@ -15,3 +15,4 @@ mcu:MAX3421 mcu:STM32F4 mcu:STM32F7 mcu:STM32H7 +mcu:STM32N6 diff --git a/examples/host/midi_rx/only.txt b/examples/host/midi_rx/only.txt index b6f87f423..6e6e2184f 100644 --- a/examples/host/midi_rx/only.txt +++ b/examples/host/midi_rx/only.txt @@ -18,3 +18,4 @@ mcu:RAXXX mcu:STM32F4 mcu:STM32F7 mcu:STM32H7 +mcu:STM32N6 diff --git a/examples/host/msc_file_explorer/only.txt b/examples/host/msc_file_explorer/only.txt index 95f9f1d82..9b8d535e6 100644 --- a/examples/host/msc_file_explorer/only.txt +++ b/examples/host/msc_file_explorer/only.txt @@ -15,3 +15,4 @@ mcu:MAX3421 mcu:STM32F4 mcu:STM32F7 mcu:STM32H7 +mcu:STM32N6 diff --git a/hw/bsp/stm32n6/FreeRTOSConfig/FreeRTOSConfig.h b/hw/bsp/stm32n6/FreeRTOSConfig/FreeRTOSConfig.h new file mode 100644 index 000000000..9fd3f6c50 --- /dev/null +++ b/hw/bsp/stm32n6/FreeRTOSConfig/FreeRTOSConfig.h @@ -0,0 +1,149 @@ +/* + * FreeRTOS Kernel V10.0.0 + * Copyright (C) 2017 Amazon.com, Inc. or its affiliates. All Rights Reserved. + * + * Permission is hereby granted, free of charge, to any person obtaining a copy of + * this software and associated documentation files (the "Software"), to deal in + * the Software without restriction, including without limitation the rights to + * use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of + * the Software, and to permit persons to whom the Software is furnished to do so, + * subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in all + * copies or substantial portions of the Software. If you wish to use our Amazon + * FreeRTOS name, please do so in a fair use way that does not cause confusion. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS + * FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR + * COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER + * IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN + * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. + * + * http://www.FreeRTOS.org + * http://aws.amazon.com/freertos + * + * 1 tab == 4 spaces! + */ + + +#ifndef FREERTOS_CONFIG_H +#define FREERTOS_CONFIG_H + +/*----------------------------------------------------------- + * Application specific definitions. + * + * These definitions should be adjusted for your particular hardware and + * application requirements. + * + * THESE PARAMETERS ARE DESCRIBED WITHIN THE 'CONFIGURATION' SECTION OF THE + * FreeRTOS API DOCUMENTATION AVAILABLE ON THE FreeRTOS.org WEB SITE. + * + * See http://www.freertos.org/a00110.html. + *----------------------------------------------------------*/ + +// skip if included from IAR assembler +#ifndef __IASMARM__ + #include "stm32h7rsxx.h" +#endif + +/* Cortex M23/M33 port configuration. */ +#define configENABLE_MPU 0 +#define configENABLE_FPU 1 +#define configENABLE_TRUSTZONE 0 +#define configMINIMAL_SECURE_STACK_SIZE (1024) + +#define configUSE_PREEMPTION 1 +#define configUSE_PORT_OPTIMISED_TASK_SELECTION 0 +#define configCPU_CLOCK_HZ SystemCoreClock +#define configTICK_RATE_HZ ( 1000 ) +#define configMAX_PRIORITIES ( 5 ) +#define configMINIMAL_STACK_SIZE ( 128 ) +#define configTOTAL_HEAP_SIZE ( configSUPPORT_DYNAMIC_ALLOCATION*8*1024 ) +#define configMAX_TASK_NAME_LEN 16 +#define configUSE_16_BIT_TICKS 0 +#define configIDLE_SHOULD_YIELD 1 +#define configUSE_MUTEXES 1 +#define configUSE_RECURSIVE_MUTEXES 1 +#define configUSE_COUNTING_SEMAPHORES 1 +#define configQUEUE_REGISTRY_SIZE 4 +#define configUSE_QUEUE_SETS 0 +#define configUSE_TIME_SLICING 0 +#define configUSE_NEWLIB_REENTRANT 0 +#define configENABLE_BACKWARD_COMPATIBILITY 1 +#define configSTACK_ALLOCATION_FROM_SEPARATE_HEAP 0 + +#define configSUPPORT_STATIC_ALLOCATION 1 +#define configSUPPORT_DYNAMIC_ALLOCATION 0 + +/* Hook function related definitions. */ +#define configUSE_IDLE_HOOK 0 +#define configUSE_TICK_HOOK 0 +#define configUSE_MALLOC_FAILED_HOOK 0 // cause nested extern warning +#define configCHECK_FOR_STACK_OVERFLOW 2 +#define configCHECK_HANDLER_INSTALLATION 0 + +/* Run time and task stats gathering related definitions. */ +#define configGENERATE_RUN_TIME_STATS 0 +#define configRECORD_STACK_HIGH_ADDRESS 1 +#define configUSE_TRACE_FACILITY 1 // legacy trace +#define configUSE_STATS_FORMATTING_FUNCTIONS 0 + +/* Co-routine definitions. */ +#define configUSE_CO_ROUTINES 0 +#define configMAX_CO_ROUTINE_PRIORITIES 2 + +/* Software timer related definitions. */ +#define configUSE_TIMERS 1 +#define configTIMER_TASK_PRIORITY (configMAX_PRIORITIES-2) +#define configTIMER_QUEUE_LENGTH 32 +#define configTIMER_TASK_STACK_DEPTH configMINIMAL_STACK_SIZE + +/* Optional functions - most linkers will remove unused functions anyway. */ +#define INCLUDE_vTaskPrioritySet 0 +#define INCLUDE_uxTaskPriorityGet 0 +#define INCLUDE_vTaskDelete 0 +#define INCLUDE_vTaskSuspend 1 // required for queue, semaphore, mutex to be blocked indefinitely with portMAX_DELAY +#define INCLUDE_xResumeFromISR 0 +#define INCLUDE_vTaskDelayUntil 1 +#define INCLUDE_vTaskDelay 1 +#define INCLUDE_xTaskGetSchedulerState 0 +#define INCLUDE_xTaskGetCurrentTaskHandle 1 +#define INCLUDE_uxTaskGetStackHighWaterMark 0 +#define INCLUDE_xTaskGetIdleTaskHandle 0 +#define INCLUDE_xTimerGetTimerDaemonTaskHandle 0 +#define INCLUDE_pcTaskGetTaskName 0 +#define INCLUDE_eTaskGetState 0 +#define INCLUDE_xEventGroupSetBitFromISR 0 +#define INCLUDE_xTimerPendFunctionCall 0 + +/* FreeRTOS hooks to NVIC vectors */ +#define xPortPendSVHandler PendSV_Handler +#define xPortSysTickHandler SysTick_Handler +#define vPortSVCHandler SVC_Handler + +//--------------------------------------------------------------------+ +// Interrupt nesting behavior configuration. +//--------------------------------------------------------------------+ + +// For Cortex-M specific: __NVIC_PRIO_BITS is defined in mcu header +#define configPRIO_BITS 4 + +/* The lowest interrupt priority that can be used in a call to a "set priority" function. */ +#define configLIBRARY_LOWEST_INTERRUPT_PRIORITY ((1<ROM + + /* The program code and other data into "RAM" Ram type memory */ + .text : + { + . = ALIGN(4); + *(.text) /* .text sections (code) */ + *(.text*) /* .text* sections (code) */ + *(.glue_7) /* glue arm to thumb code */ + *(.glue_7t) /* glue thumb to arm code */ + *(.eh_frame) + *(.RamFunc) /* .RamFunc sections */ + *(.RamFunc*) /* .RamFunc* sections */ + + KEEP (*(.init)) + KEEP (*(.fini)) + + . = ALIGN(4); + _etext = .; /* define a global symbols at end of code */ + } >ROM + + /* Constant data into "RAM" Ram type memory */ + .rodata : + { + . = ALIGN(4); + *(.rodata) /* .rodata sections (constants, strings, etc.) */ + *(.rodata*) /* .rodata* sections (constants, strings, etc.) */ + . = ALIGN(4); + } >ROM + + .ARM.extab (READONLY) : /* The READONLY keyword is only supported in GCC11 and later, remove it if using GCC10 or earlier. */ + { + . = ALIGN(4); + *(.ARM.extab* .gnu.linkonce.armextab.*) + . = ALIGN(4); + } >ROM + + .ARM (READONLY) : /* The READONLY keyword is only supported in GCC11 and later, remove it if using GCC10 or earlier. */ + { + . = ALIGN(4); + __exidx_start = .; + *(.ARM.exidx*) + __exidx_end = .; + . = ALIGN(4); + } >ROM + + .preinit_array (READONLY) : /* The READONLY keyword is only supported in GCC11 and later, remove it if using GCC10 or earlier. */ + { + . = ALIGN(4); + PROVIDE_HIDDEN (__preinit_array_start = .); + KEEP (*(.preinit_array*)) + PROVIDE_HIDDEN (__preinit_array_end = .); + . = ALIGN(4); + } >ROM + + .init_array (READONLY) : /* The READONLY keyword is only supported in GCC11 and later, remove it if using GCC10 or earlier. */ + { + . = ALIGN(4); + PROVIDE_HIDDEN (__init_array_start = .); + KEEP (*(SORT(.init_array.*))) + KEEP (*(.init_array*)) + PROVIDE_HIDDEN (__init_array_end = .); + . = ALIGN(4); + } >ROM + + .fini_array (READONLY) : /* The READONLY keyword is only supported in GCC11 and later, remove it if using GCC10 or earlier. */ + { + . = ALIGN(4); + PROVIDE_HIDDEN (__fini_array_start = .); + KEEP (*(SORT(.fini_array.*))) + KEEP (*(.fini_array*)) + PROVIDE_HIDDEN (__fini_array_end = .); + . = ALIGN(4); + } >ROM + + /* Used by the startup to initialize data */ + _sidata = LOADADDR(.data); + + /* Initialized data sections into "RAM" Ram type memory */ + .data : + { + . = ALIGN(4); + _sdata = .; /* create a global symbol at data start */ + *(.data) /* .data sections */ + *(.data*) /* .data* sections */ + + . = ALIGN(4); + _edata = .; /* define a global symbol at data end */ + + } >RAM AT> ROM + + .noncacheable : + { + . = ALIGN(8); + __snoncacheable = .;/* create symbol for start of section */ + KEEP(*(.noncacheable)) + . = ALIGN(8); + __enoncacheable = .; /* create symbol for end of section */ + } > RAM + + + .gnu.sgstubs : + { + . = ALIGN(4); + *(.gnu.sgstubs*) /* Secure Gateway stubs */ + . = ALIGN(4); + } >ROM + /* Uninitialized data section into "RAM" Ram type memory */ + . = ALIGN(4); + .bss : + { + /* This is used by the startup in order to initialize the .bss section */ + _sbss = .; /* define a global symbol at bss start */ + __bss_start__ = _sbss; + *(.bss) + *(.bss*) + *(COMMON) + + . = ALIGN(4); + _ebss = .; /* define a global symbol at bss end */ + __bss_end__ = _ebss; + } >RAM + + /* User_heap_stack section, used to check that there is enough "RAM" Ram type memory left */ + ._user_heap_stack : + { + . = ALIGN(8); + PROVIDE ( end = . ); + PROVIDE ( _end = . ); + . = . + _Min_Heap_Size; + . = . + _Min_Stack_Size; + . = ALIGN(8); + } >RAM + + /* Remove information from the compiler libraries */ + /DISCARD/ : + { + libc.a ( * ) + libm.a ( * ) + libgcc.a ( * ) + } + + .ARM.attributes 0 : { *(.ARM.attributes) } +} diff --git a/hw/bsp/stm32n6/boards/stm32n657nucleo/board.cmake b/hw/bsp/stm32n6/boards/stm32n657nucleo/board.cmake new file mode 100644 index 000000000..197b5108f --- /dev/null +++ b/hw/bsp/stm32n6/boards/stm32n657nucleo/board.cmake @@ -0,0 +1,25 @@ +set(MCU_VARIANT stm32n657xx) +set(JLINK_DEVICE stm32n6xx) + +set(LD_FILE_GNU ${CMAKE_CURRENT_LIST_DIR}/STM32N657XX_LRUN.ld) +set(LD_FILE_Clang ${LD_FILE_GNU}) + +set(STARTUP_FILE_GNU ${ST_CMSIS}/Source/Templates/gcc/startup_${MCU_VARIANT}.s) + +function(update_board TARGET) + + target_compile_definitions(${TARGET} PUBLIC + STM32N6xx + SEGGER_RTT_SECTION="noncacheable_buffer" + BUFFER_SIZE_UP=0x3000 + ) + + target_sources(${TARGET} PUBLIC + # BSP + ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/tcpp0203/tcpp0203.c + ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/tcpp0203/tcpp0203_reg.c + ) + target_include_directories(${TARGET} PUBLIC + ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/tcpp0203 + ) +endfunction() diff --git a/hw/bsp/stm32n6/boards/stm32n657nucleo/board.h b/hw/bsp/stm32n6/boards/stm32n657nucleo/board.h new file mode 100644 index 000000000..d3781c6d0 --- /dev/null +++ b/hw/bsp/stm32n6/boards/stm32n657nucleo/board.h @@ -0,0 +1,283 @@ +/* + * The MIT License (MIT) + * + * Copyright (c) 2021, Ha Thach (tinyusb.org) + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + * This file is part of the TinyUSB stack. + */ + +/* metadata: + name: STM32 H723 Nucleo + url: https://www.st.com/en/evaluation-tools/nucleo-h723zg.html +*/ + +#ifndef BOARD_H_ +#define BOARD_H_ + +#ifdef __cplusplus +extern "C" { +#endif + +#include "stm32n657xx.h" +#include "stm32n6xx_ll_exti.h" +#include "stm32n6xx_ll_system.h" +#include "tcpp0203.h" + +#define UART_DEV USART1 +#define UART_CLK_EN __HAL_RCC_USART1_CLK_ENABLE + +#define BOARD_TUD_RHPORT 1 + +// VBUS Sense detection +#define OTG_FS_VBUS_SENSE 1 +#define OTG_HS_VBUS_SENSE 1 + +#define PINID_LED 0 +#define PINID_BUTTON 1 +#define PINID_UART_TX 2 +#define PINID_UART_RX 3 +#define PINID_TCPP0203_EN 4 + +static board_pindef_t board_pindef[] = { + {// LED + .port = GPIOG, + .pin_init = {.Pin = GPIO_PIN_10, .Mode = GPIO_MODE_OUTPUT_PP, .Pull = GPIO_PULLDOWN, .Speed = GPIO_SPEED_FREQ_HIGH, .Alternate = 0}, + .active_state = 1}, + {// Button + .port = GPIOC, + .pin_init = {.Pin = GPIO_PIN_13, .Mode = GPIO_MODE_INPUT, .Pull = GPIO_PULLDOWN, .Speed = GPIO_SPEED_FREQ_HIGH, .Alternate = 0}, + .active_state = 1}, + {// UART TX + .port = GPIOE, + .pin_init = {.Pin = GPIO_PIN_5, .Mode = GPIO_MODE_AF_PP, .Pull = GPIO_NOPULL, .Speed = GPIO_SPEED_FREQ_LOW, .Alternate = GPIO_AF7_USART1}, + .active_state = 0}, + {// UART RX + .port = GPIOE, + .pin_init = {.Pin = GPIO_PIN_6, .Mode = GPIO_MODE_AF_PP, .Pull = GPIO_NOPULL, .Speed = GPIO_SPEED_FREQ_LOW, .Alternate = GPIO_AF7_USART1}, + .active_state = 0}, + {// VBUS input pin used for TCPP0203 EN + .port = GPIOA, + .pin_init = {.Pin = GPIO_PIN_7, .Mode = GPIO_MODE_OUTPUT_PP, .Pull = GPIO_PULLDOWN, .Speed = GPIO_SPEED_FREQ_HIGH, .Alternate = 0}, + .active_state = 0}, + { + // I2C SCL for TCPP0203 + .port = GPIOB, + .pin_init = {.Pin = GPIO_PIN_10, .Mode = GPIO_MODE_AF_OD, .Pull = GPIO_NOPULL, .Speed = GPIO_SPEED_FREQ_LOW, .Alternate = GPIO_AF4_I2C2}, + }, + { + // I2C SDA for TCPP0203 + .port = GPIOB, + .pin_init = {.Pin = GPIO_PIN_11, .Mode = GPIO_MODE_AF_OD, .Pull = GPIO_NOPULL, .Speed = GPIO_SPEED_FREQ_LOW, .Alternate = GPIO_AF4_I2C2}, + }, + { + // INT for TCPP0203 + .port = GPIOD, + .pin_init = {.Pin = GPIO_PIN_2, .Mode = GPIO_MODE_IT_FALLING, .Pull = GPIO_PULLUP, .Speed = GPIO_SPEED_FREQ_HIGH, .Alternate = 0}, + }, +}; + +//--------------------------------------------------------------------+ +// RCC Clock +//--------------------------------------------------------------------+ +void SystemClock_Config(void) { + RCC_OscInitTypeDef RCC_OscInitStruct = {0}; + RCC_ClkInitTypeDef RCC_ClkInitStruct = {0}; + /* Configure the power domain */ + if (HAL_PWREx_ConfigSupply(PWR_EXTERNAL_SOURCE_SUPPLY) != HAL_OK) { + Error_Handler(); + } + + /* Get current CPU/System buses clocks configuration */ + /* and if necessary switch to intermediate HSI clock */ + /* to ensure target clock can be set */ + HAL_RCC_GetClockConfig(&RCC_ClkInitStruct); + if ((RCC_ClkInitStruct.CPUCLKSource == RCC_CPUCLKSOURCE_IC1) || + (RCC_ClkInitStruct.SYSCLKSource == RCC_SYSCLKSOURCE_IC2_IC6_IC11)) { + RCC_ClkInitStruct.ClockType = (RCC_CLOCKTYPE_CPUCLK | RCC_CLOCKTYPE_SYSCLK); + RCC_ClkInitStruct.CPUCLKSource = RCC_CPUCLKSOURCE_HSI; + RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_HSI; + if (HAL_RCC_ClockConfig(&RCC_ClkInitStruct) != HAL_OK) { + Error_Handler(); + } + } + + /* HSE selected as source (stable clock on Level 0 samples */ + /* PLL1 output = ((HSE/PLLM)*PLLN)/PLLP1/PLLP2 */ + /* = ((48000000/3)*75)/1/1 */ + /* = (16000000*75)/1/1 */ + /* = 1200000000 (1200 MHz) */ + /* PLL2 off */ + /* PLL3 off */ + /* PLL4 off */ + + /* Enable HSE && HSI */ + RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSE; + RCC_OscInitStruct.HSIState = RCC_HSI_OFF; + RCC_OscInitStruct.HSIDiv = RCC_HSI_DIV1; + RCC_OscInitStruct.HSICalibrationValue = RCC_HSICALIBRATION_DEFAULT; + RCC_OscInitStruct.HSEState = RCC_HSE_ON; /* 48 MHz */ + + RCC_OscInitStruct.PLL1.PLLState = RCC_PLL_ON; + RCC_OscInitStruct.PLL1.PLLSource = RCC_PLLSOURCE_HSE; + RCC_OscInitStruct.PLL1.PLLM = 3; + RCC_OscInitStruct.PLL1.PLLN = 75; /* PLL1 VCO = 48/3 * 75 = 1200MHz */ + RCC_OscInitStruct.PLL1.PLLP1 = 1; /* PLL output = PLL VCO frequency / (PLLP1 * PLLP2) */ + RCC_OscInitStruct.PLL1.PLLP2 = 1; /* PLL output = 1200 MHz */ + RCC_OscInitStruct.PLL1.PLLFractional = 0; + + if (HAL_RCC_OscConfig(&RCC_OscInitStruct) != HAL_OK) { + /* Initialization error */ + Error_Handler(); + } + + /* Select PLL1 outputs as CPU and System bus clock source */ + /* CPUCLK = ic1_ck = PLL1 output/ic1_divider = 600 MHz */ + /* SYSCLK = ic2_ck = PLL1 output/ic2_divider = 400 MHz */ + /* Configure the HCLK clock divider */ + /* HCLK = PLL1 SYSCLK/HCLK divider = 200 MHz */ + /* PCLKx = HCLK / PCLKx divider = 200 MHz */ + RCC_ClkInitStruct.ClockType = (RCC_CLOCKTYPE_CPUCLK | RCC_CLOCKTYPE_SYSCLK | RCC_CLOCKTYPE_HCLK | + RCC_CLOCKTYPE_PCLK1 | RCC_CLOCKTYPE_PCLK2 | RCC_CLOCKTYPE_PCLK4 | RCC_CLOCKTYPE_PCLK5); + RCC_ClkInitStruct.CPUCLKSource = RCC_CPUCLKSOURCE_IC1; + RCC_ClkInitStruct.IC1Selection.ClockSelection = RCC_ICCLKSOURCE_PLL1; + RCC_ClkInitStruct.IC1Selection.ClockDivider = 2; + RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_IC2_IC6_IC11; + RCC_ClkInitStruct.IC2Selection.ClockSelection = RCC_ICCLKSOURCE_PLL1; + RCC_ClkInitStruct.IC2Selection.ClockDivider = 3; + RCC_ClkInitStruct.IC6Selection.ClockSelection = RCC_ICCLKSOURCE_PLL1; + RCC_ClkInitStruct.IC6Selection.ClockDivider = 3; + RCC_ClkInitStruct.IC11Selection.ClockSelection = RCC_ICCLKSOURCE_PLL1; + RCC_ClkInitStruct.IC11Selection.ClockDivider = 3; + RCC_ClkInitStruct.AHBCLKDivider = RCC_HCLK_DIV2; + RCC_ClkInitStruct.APB1CLKDivider = RCC_APB1_DIV1; + RCC_ClkInitStruct.APB2CLKDivider = RCC_APB2_DIV1; + RCC_ClkInitStruct.APB4CLKDivider = RCC_APB4_DIV1; + RCC_ClkInitStruct.APB5CLKDivider = RCC_APB5_DIV1; + if (HAL_RCC_ClockConfig(&RCC_ClkInitStruct) != HAL_OK) { + /* Initialization Error */ + Error_Handler(); + } + + /** Initializes the peripherals clock + */ + RCC_PeriphCLKInitTypeDef PeriphClkInitStruct = {0}; + PeriphClkInitStruct.PeriphClockSelection = RCC_PERIPHCLK_USBOTGHS1; + PeriphClkInitStruct.UsbOtgHs1ClockSelection = RCC_USBPHY1REFCLKSOURCE_HSE_DIRECT; + + if (HAL_RCCEx_PeriphCLKConfig(&PeriphClkInitStruct) != HAL_OK) { + /* Initialization Error */ + Error_Handler(); + } + + /** Set USB OTG HS PHY1 Reference Clock Source */ + PeriphClkInitStruct.PeriphClockSelection = RCC_PERIPHCLK_USBPHY1; + PeriphClkInitStruct.UsbPhy1ClockSelection = RCC_USBPHY1REFCLKSOURCE_HSE_DIRECT; + + if (HAL_RCCEx_PeriphCLKConfig(&PeriphClkInitStruct) != HAL_OK) { + /* Initialization Error */ + Error_Handler(); + } +} + +//--------------------------------------------------------------------+ +// USB PD +//--------------------------------------------------------------------+ +static I2C_HandleTypeDef i2c_handle = { + .Instance = I2C2, + .Init = { + .Timing = 0x20C0EDFF, + .OwnAddress1 = 0, + .AddressingMode = I2C_ADDRESSINGMODE_7BIT, + .DualAddressMode = I2C_DUALADDRESS_DISABLE, + .OwnAddress2 = 0, + .OwnAddress2Masks = I2C_OA2_NOMASK, + .GeneralCallMode = I2C_GENERALCALL_DISABLE, + .NoStretchMode = I2C_NOSTRETCH_DISABLE, + }}; +static TCPP0203_Object_t tcpp0203_obj = {0}; + +int32_t board_tcpp0203_init(void) { + board_pindef_t *pindef = &board_pindef[PINID_TCPP0203_EN]; + HAL_GPIO_WritePin(pindef->port, pindef->pin_init.Pin, GPIO_PIN_SET); + + __HAL_RCC_I2C2_CLK_ENABLE(); + __HAL_RCC_I2C2_FORCE_RESET(); + __HAL_RCC_I2C2_RELEASE_RESET(); + if (HAL_I2C_Init(&i2c_handle) != HAL_OK) { + return HAL_ERROR; + } + + NVIC_SetPriority(EXTI8_IRQn, 12); + NVIC_EnableIRQ(EXTI8_IRQn); + + return 0; +} + +int32_t board_tcpp0203_deinit(void) { + return 0; +} + +int32_t i2c_readreg(uint16_t DevAddr, uint16_t Reg, uint8_t *pData, uint16_t Length) { + TU_ASSERT(HAL_OK == HAL_I2C_Mem_Read(&i2c_handle, DevAddr, Reg, I2C_MEMADD_SIZE_8BIT, pData, Length, 10000)); + return 0; +} + +int32_t i2c_writereg(uint16_t DevAddr, uint16_t Reg, uint8_t *pData, uint16_t Length) { + TU_ASSERT(HAL_OK == HAL_I2C_Mem_Write(&i2c_handle, DevAddr, Reg, I2C_MEMADD_SIZE_8BIT, pData, Length, 10000)); + return 0; +} + +static inline void board_init2(void) { + TCPP0203_IO_t io_ctx; + + io_ctx.Address = TCPP0203_I2C_ADDRESS_X68; + io_ctx.Init = board_tcpp0203_init; + io_ctx.DeInit = board_tcpp0203_deinit; + io_ctx.ReadReg = i2c_readreg; + io_ctx.WriteReg = i2c_writereg; + + TU_ASSERT(TCPP0203_RegisterBusIO(&tcpp0203_obj, &io_ctx) == TCPP0203_OK, ); + + TU_ASSERT(TCPP0203_Init(&tcpp0203_obj) == TCPP0203_OK, ); + + TU_ASSERT(TCPP0203_SetPowerMode(&tcpp0203_obj, TCPP0203_POWER_MODE_NORMAL) == TCPP0203_OK, ); +} + +void board_vbus_set(uint8_t rhport, bool state) { + (void) state; + if (rhport == 1) { + TU_ASSERT(TCPP0203_SetGateDriverProvider(&tcpp0203_obj, TCPP0203_GD_PROVIDER_SWITCH_CLOSED) == TCPP0203_OK, ); + } +} + +void EXTI8_IRQHandler(void) { + __HAL_GPIO_EXTI_CLEAR_IT(GPIO_PIN_8); + if (tcpp0203_obj.IsInitialized) { + TU_ASSERT(TCPP0203_SetPowerMode(&tcpp0203_obj, TCPP0203_POWER_MODE_NORMAL) == TCPP0203_OK, ); + TU_ASSERT(TCPP0203_SetGateDriverProvider(&tcpp0203_obj, TCPP0203_GD_PROVIDER_SWITCH_CLOSED) == TCPP0203_OK, ); + } +} + +#ifdef __cplusplus +} +#endif + +#endif diff --git a/hw/bsp/stm32n6/boards/stm32n657nucleo/board.mk b/hw/bsp/stm32n6/boards/stm32n657nucleo/board.mk new file mode 100644 index 000000000..b851da0ca --- /dev/null +++ b/hw/bsp/stm32n6/boards/stm32n657nucleo/board.mk @@ -0,0 +1,23 @@ +MCU_VARIANT = stm32n6xx +CFLAGS += -DSTM32N6xx + +# For flash-jlink target +JLINK_DEVICE = stm32n6xx + +# flash target using on-board stlink +flash: flash-stlink + +PORT = 1 + + +SRC_C += \ + $(BOARD_PATH)/tcpp0203/tcpp0203.c \ + $(BOARD_PATH)/tcpp0203/tcpp0203_reg.c \ + +INC += \ + $(TOP)/$(BOARD_PATH)/tcpp0203 \ + +CFLAGS += \ + -DSEGGER_RTT_SECTION=\"noncacheable_buffer\" \ + -DSTM32N657xx + -DBUFFER_SIZE_UP=0x3000 \ diff --git a/hw/bsp/stm32n6/boards/stm32n657nucleo/tcpp0203/LICENSE.txt b/hw/bsp/stm32n6/boards/stm32n657nucleo/tcpp0203/LICENSE.txt new file mode 100644 index 000000000..1cbbc544a --- /dev/null +++ b/hw/bsp/stm32n6/boards/stm32n657nucleo/tcpp0203/LICENSE.txt @@ -0,0 +1,6 @@ +This software component is provided to you as part of a software package and +applicable license terms are in the Package_license file. If you received this +software component outside of a package or without applicable license terms, +the terms of the BSD-3-Clause license shall apply. +You may obtain a copy of the BSD-3-Clause at: +https://opensource.org/licenses/BSD-3-Clause diff --git a/hw/bsp/stm32n6/boards/stm32n657nucleo/tcpp0203/Release_Notes.html b/hw/bsp/stm32n6/boards/stm32n657nucleo/tcpp0203/Release_Notes.html new file mode 100644 index 000000000..6bbba86a4 --- /dev/null +++ b/hw/bsp/stm32n6/boards/stm32n657nucleo/tcpp0203/Release_Notes.html @@ -0,0 +1,205 @@ + + + + + + + Release Notes for TCPP0203 Component Driver + + + + + + +
+
+
+

Release Notes for TCPP0203 Component Driver

+

Copyright © 2020 STMicroelectronics
+

+ +
+

Purpose

+

This driver provides a set of functions needed to drive TCPP0203 Type-C Port Protection component

+
+
+

Update History

+
+ +
+

Main Changes

+

Maintenance release

+

Contents

+ + + + + + + + + + + +
Headline
MISRA Rule-81.13 correction on TCPP0203 component driver files
+

Backward compatibility

+

No compatibility break with previous version

+

Dependencies

+
+
+
+ +
+

Main Changes

+

Maintenance release

+

Contents

+ + + + + + + + + + + + +
Fixed bugs list
Headline
MISRA corrections on TCPP0203 component driver files
+

Known Limitations

+

Outstanding bugs list : None

+

Requirements not met or planned in a forthcoming release : None

+

Development Toolchains and Compilers

+
    +
  • IAR Embedded Workbench for ARM (EWARM) toolchain V8.32.3
    • +
  • RealView Microcontroller Development Kit (MDK-ARM) toolchain V5.27.1
    • +
  • STM32CubeIDE toolchain V1.8.0
    • +
+

Backward compatibility

+

No compatibility break with previous version

+

Dependencies

+
+
+
+ +
+

Main Changes

+

Maintenance release

+

Contents

+ + + + + + + + + + + + +
Fixed bugs list
Headline
License updates
+

Known Limitations

+

Outstanding bugs list : None

+

Requirements not met or planned in a forthcoming release : None

+

Development Toolchains and Compilers

+
    +
  • IAR Embedded Workbench for ARM (EWARM) toolchain V8.32.3
    • +
  • RealView Microcontroller Development Kit (MDK-ARM) toolchain V5.27.1
    • +
  • STM32CubeIDE toolchain V1.6.0
    • +
+

Backward compatibility

+

No compatibility break with previous version

+

Dependencies

+
+
+
+ +
+

Main Changes

+

Maintenance release

+

Contents

+ + + + + + + + + + + + +
Fixed bugs list
Headline
CodeSpell correction on TCPP0203 component driver files
+

Known Limitations

+

Outstanding bugs list : None

+

Requirements not met or planned in a forthcoming release : None

+

Development Toolchains and Compilers

+
    +
  • IAR Embedded Workbench for ARM (EWARM) toolchain V8.32.3
    • +
  • RealView Microcontroller Development Kit (MDK-ARM) toolchain V5.27.1
    • +
  • STM32CubeIDE toolchain V1.5.0
    • +
+

Backward compatibility

+

No compatibility break with previous version

+

Dependencies

+
+
+
+ +
+

Main Changes

+

Maintenance release

+

Contents

+ + + + + + + + + + + + +
Fixed bugs list
Headline
MCUAstyle correction on TCPP0203 component driver files
+

Known Limitations

+

Outstanding bugs list : None

+

Requirements not met or planned in a forthcoming release : None

+

Development Toolchains and Compilers

+
    +
  • IAR Embedded Workbench for ARM (EWARM) toolchain V8.32.3
    • +
  • RealView Microcontroller Development Kit (MDK-ARM) toolchain V5.27.1
    • +
  • STM32CubeIDE toolchain V1.5.0
    • +
+

Backward compatibility

+

No compatibility break with previous version

+

Dependencies

+
+
+
+ +
+

Main Changes

+
    +
  • First official release of TCPP0203 Type-C port Protection Component drivers
    • +
+
+
+
+
+
+

For complete documentation on STM32,visit: [www.st.com/stm32]

+This release note uses up to date web standards and, for this reason, should not be opened with Internet Explorer but preferably with popular browsers such as Google Chrome, Mozilla Firefox, Opera or Microsoft Edge. +
+ + diff --git a/hw/bsp/stm32n6/boards/stm32n657nucleo/tcpp0203/_htmresc/favicon.png b/hw/bsp/stm32n6/boards/stm32n657nucleo/tcpp0203/_htmresc/favicon.png new file mode 100644 index 000000000..06713eec4 Binary files /dev/null and b/hw/bsp/stm32n6/boards/stm32n657nucleo/tcpp0203/_htmresc/favicon.png differ diff --git a/hw/bsp/stm32n6/boards/stm32n657nucleo/tcpp0203/_htmresc/mini-st_2020.css b/hw/bsp/stm32n6/boards/stm32n657nucleo/tcpp0203/_htmresc/mini-st_2020.css new file mode 100644 index 000000000..dd19969d1 --- /dev/null +++ b/hw/bsp/stm32n6/boards/stm32n657nucleo/tcpp0203/_htmresc/mini-st_2020.css @@ -0,0 +1,1703 @@ +@charset "UTF-8"; +/* + Flavor name: Custom (mini-custom) + Generated online - https://minicss.org/flavors + mini.css version: v3.0.1 +*/ +/* + Browsers resets and base typography. +*/ +/* Core module CSS variable definitions */ +:root { + --fore-color: #03234b; + --secondary-fore-color: #03234b; + --back-color: #ffffff; + --secondary-back-color: #ffffff; + --blockquote-color: #e6007e; + --pre-color: #e6007e; + --border-color: #3cb4e6; + --secondary-border-color: #3cb4e6; + --heading-ratio: 1.2; + --universal-margin: 0.5rem; + --universal-padding: 0.25rem; + --universal-border-radius: 0.075rem; + --background-margin: 1.5%; + --a-link-color: #3cb4e6; + --a-visited-color: #8c0078; } + +html { + font-size: 13.5px; } + +a, b, del, em, i, ins, q, span, strong, u { + font-size: 1em; } + +html, * { + font-family: -apple-system, BlinkMacSystemFont, Helvetica, arial, sans-serif; + line-height: 1.25; + -webkit-text-size-adjust: 100%; } + +* { + font-size: 1rem; } + +body { + margin: 0; + color: var(--fore-color); + @background: var(--back-color); + background: var(--back-color) linear-gradient(#ffd200, #ffd200) repeat-y left top; + background-size: var(--background-margin); + } + +details { + display: block; } + +summary { + display: list-item; } + +abbr[title] { + border-bottom: none; + text-decoration: underline dotted; } + +input { + overflow: visible; } + +img { + max-width: 100%; + height: auto; } + +h1, h2, h3, h4, h5, h6 { + line-height: 1.25; + margin: calc(1.5 * var(--universal-margin)) var(--universal-margin); + font-weight: 400; } + h1 small, h2 small, h3 small, h4 small, h5 small, h6 small { + color: var(--secondary-fore-color); + display: block; + margin-top: -0.25rem; } + +h1 { + font-size: calc(1rem * var(--heading-ratio) * var(--heading-ratio) * var(--heading-ratio)); } + +h2 { + font-size: calc(1rem * var(--heading-ratio) * var(--heading-ratio) ); + border-style: none none solid none ; + border-width: thin; + border-color: var(--border-color); } +h3 { + font-size: calc(1rem * var(--heading-ratio) ); } + +h4 { + font-size: calc(1rem * var(--heading-ratio)); } + +h5 { + font-size: 1rem; } + +h6 { + font-size: calc(1rem / var(--heading-ratio)); } + +p { + margin: var(--universal-margin); } + +ol, ul { + margin: var(--universal-margin); + padding-left: calc(3 * var(--universal-margin)); } + +b, strong { + font-weight: 700; } + +hr { + box-sizing: content-box; + border: 0; + line-height: 1.25em; + margin: var(--universal-margin); + height: 0.0714285714rem; + background: linear-gradient(to right, transparent, var(--border-color) 20%, var(--border-color) 80%, transparent); } + +blockquote { + display: block; + position: relative; + font-style: italic; + color: var(--secondary-fore-color); + margin: var(--universal-margin); + padding: calc(3 * var(--universal-padding)); + border: 0.0714285714rem solid var(--secondary-border-color); + border-left: 0.3rem solid var(--blockquote-color); + border-radius: 0 var(--universal-border-radius) var(--universal-border-radius) 0; } + blockquote:before { + position: absolute; + top: calc(0rem - var(--universal-padding)); + left: 0; + font-family: sans-serif; + font-size: 2rem; + font-weight: 800; + content: "\201c"; + color: var(--blockquote-color); } + blockquote[cite]:after { + font-style: normal; + font-size: 0.75em; + font-weight: 700; + content: "\a— " attr(cite); + white-space: pre; } + +code, kbd, pre, samp { + font-family: Menlo, Consolas, monospace; + font-size: 0.85em; } + +code { + background: var(--secondary-back-color); + border-radius: var(--universal-border-radius); + padding: calc(var(--universal-padding) / 4) calc(var(--universal-padding) / 2); } + +kbd { + background: var(--fore-color); + color: var(--back-color); + border-radius: var(--universal-border-radius); + padding: calc(var(--universal-padding) / 4) calc(var(--universal-padding) / 2); } + +pre { + overflow: auto; + background: var(--secondary-back-color); + padding: calc(1.5 * var(--universal-padding)); + margin: var(--universal-margin); + border: 0.0714285714rem solid var(--secondary-border-color); + border-left: 0.2857142857rem solid var(--pre-color); + border-radius: 0 var(--universal-border-radius) var(--universal-border-radius) 0; } + +sup, sub, code, kbd { + line-height: 0; + position: relative; + vertical-align: baseline; } + +small, sup, sub, figcaption { + font-size: 0.75em; } + +sup { + top: -0.5em; } + +sub { + bottom: -0.25em; } + +figure { + margin: var(--universal-margin); } + +figcaption { + color: var(--secondary-fore-color); } + +a { + text-decoration: none; } + a:link { + color: var(--a-link-color); } + a:visited { + color: var(--a-visited-color); } + a:hover, a:focus { + text-decoration: underline; } + +/* + Definitions for the grid system, cards and containers. +*/ +.container { + margin: 0 auto; + padding: 0 calc(1.5 * var(--universal-padding)); } + +.row { + box-sizing: border-box; + display: flex; + flex: 0 1 auto; + flex-flow: row wrap; + margin: 0 0 0 var(--background-margin); } + +.col-sm, +[class^='col-sm-'], +[class^='col-sm-offset-'], +.row[class*='cols-sm-'] > * { + box-sizing: border-box; + flex: 0 0 auto; + padding: 0 calc(var(--universal-padding) / 2); } + +.col-sm, +.row.cols-sm > * { + max-width: 100%; + flex-grow: 1; + flex-basis: 0; } + +.col-sm-1, +.row.cols-sm-1 > * { + max-width: 8.3333333333%; + flex-basis: 8.3333333333%; } + +.col-sm-offset-0 { + margin-left: 0; } + +.col-sm-2, +.row.cols-sm-2 > * { + max-width: 16.6666666667%; + flex-basis: 16.6666666667%; } + +.col-sm-offset-1 { + margin-left: 8.3333333333%; } + +.col-sm-3, +.row.cols-sm-3 > * { + max-width: 25%; + flex-basis: 25%; } + +.col-sm-offset-2 { + margin-left: 16.6666666667%; } + +.col-sm-4, +.row.cols-sm-4 > * { + max-width: 33.3333333333%; + flex-basis: 33.3333333333%; } + +.col-sm-offset-3 { + margin-left: 25%; } + +.col-sm-5, +.row.cols-sm-5 > * { + max-width: 41.6666666667%; + flex-basis: 41.6666666667%; } + +.col-sm-offset-4 { + margin-left: 33.3333333333%; } + +.col-sm-6, +.row.cols-sm-6 > * { + max-width: 50%; + flex-basis: 50%; } + +.col-sm-offset-5 { + margin-left: 41.6666666667%; } + +.col-sm-7, +.row.cols-sm-7 > * { + max-width: 58.3333333333%; + flex-basis: 58.3333333333%; } + +.col-sm-offset-6 { + margin-left: 50%; } + +.col-sm-8, +.row.cols-sm-8 > * { + max-width: 66.6666666667%; + flex-basis: 66.6666666667%; } + +.col-sm-offset-7 { + margin-left: 58.3333333333%; } + +.col-sm-9, +.row.cols-sm-9 > * { + max-width: 75%; + flex-basis: 75%; } + +.col-sm-offset-8 { + margin-left: 66.6666666667%; } + +.col-sm-10, +.row.cols-sm-10 > * { + max-width: 83.3333333333%; + flex-basis: 83.3333333333%; } + +.col-sm-offset-9 { + margin-left: 75%; } + +.col-sm-11, +.row.cols-sm-11 > * { + max-width: 91.6666666667%; + flex-basis: 91.6666666667%; } + +.col-sm-offset-10 { + margin-left: 83.3333333333%; } + +.col-sm-12, +.row.cols-sm-12 > * { + max-width: 100%; + flex-basis: 100%; } + +.col-sm-offset-11 { + margin-left: 91.6666666667%; } + +.col-sm-normal { + order: initial; } + +.col-sm-first { + order: -999; } + +.col-sm-last { + order: 999; } + +@media screen and (min-width: 500px) { + .col-md, + [class^='col-md-'], + [class^='col-md-offset-'], + .row[class*='cols-md-'] > * { + box-sizing: border-box; + flex: 0 0 auto; + padding: 0 calc(var(--universal-padding) / 2); } + + .col-md, + .row.cols-md > * { + max-width: 100%; + flex-grow: 1; + flex-basis: 0; } + + .col-md-1, + .row.cols-md-1 > * { + max-width: 8.3333333333%; + flex-basis: 8.3333333333%; } + + .col-md-offset-0 { + margin-left: 0; } + + .col-md-2, + .row.cols-md-2 > * { + max-width: 16.6666666667%; + flex-basis: 16.6666666667%; } + + .col-md-offset-1 { + margin-left: 8.3333333333%; } + + .col-md-3, + .row.cols-md-3 > * { + max-width: 25%; + flex-basis: 25%; } + + .col-md-offset-2 { + margin-left: 16.6666666667%; } + + .col-md-4, + .row.cols-md-4 > * { + max-width: 33.3333333333%; + flex-basis: 33.3333333333%; } + + .col-md-offset-3 { + margin-left: 25%; } + + .col-md-5, + .row.cols-md-5 > * { + max-width: 41.6666666667%; + flex-basis: 41.6666666667%; } + + .col-md-offset-4 { + margin-left: 33.3333333333%; } + + .col-md-6, + .row.cols-md-6 > * { + max-width: 50%; + flex-basis: 50%; } + + .col-md-offset-5 { + margin-left: 41.6666666667%; } + + .col-md-7, + .row.cols-md-7 > * { + max-width: 58.3333333333%; + flex-basis: 58.3333333333%; } + + .col-md-offset-6 { + margin-left: 50%; } + + .col-md-8, + .row.cols-md-8 > * { + max-width: 66.6666666667%; + flex-basis: 66.6666666667%; } + + .col-md-offset-7 { + margin-left: 58.3333333333%; } + + .col-md-9, + .row.cols-md-9 > * { + max-width: 75%; + flex-basis: 75%; } + + .col-md-offset-8 { + margin-left: 66.6666666667%; } + + .col-md-10, + .row.cols-md-10 > * { + max-width: 83.3333333333%; + flex-basis: 83.3333333333%; } + + .col-md-offset-9 { + margin-left: 75%; } + + .col-md-11, + .row.cols-md-11 > * { + max-width: 91.6666666667%; + flex-basis: 91.6666666667%; } + + .col-md-offset-10 { + margin-left: 83.3333333333%; } + + .col-md-12, + .row.cols-md-12 > * { + max-width: 100%; + flex-basis: 100%; } + + .col-md-offset-11 { + margin-left: 91.6666666667%; } + + .col-md-normal { + order: initial; } + + .col-md-first { + order: -999; } + + .col-md-last { + order: 999; } } +@media screen and (min-width: 1280px) { + .col-lg, + [class^='col-lg-'], + [class^='col-lg-offset-'], + .row[class*='cols-lg-'] > * { + box-sizing: border-box; + flex: 0 0 auto; + padding: 0 calc(var(--universal-padding) / 2); } + + .col-lg, + .row.cols-lg > * { + max-width: 100%; + flex-grow: 1; + flex-basis: 0; } + + .col-lg-1, + .row.cols-lg-1 > * { + max-width: 8.3333333333%; + flex-basis: 8.3333333333%; } + + .col-lg-offset-0 { + margin-left: 0; } + + .col-lg-2, + .row.cols-lg-2 > * { + max-width: 16.6666666667%; + flex-basis: 16.6666666667%; } + + .col-lg-offset-1 { + margin-left: 8.3333333333%; } + + .col-lg-3, + .row.cols-lg-3 > * { + max-width: 25%; + flex-basis: 25%; } + + .col-lg-offset-2 { + margin-left: 16.6666666667%; } + + .col-lg-4, + .row.cols-lg-4 > * { + max-width: 33.3333333333%; + flex-basis: 33.3333333333%; } + + .col-lg-offset-3 { + margin-left: 25%; } + + .col-lg-5, + .row.cols-lg-5 > * { + max-width: 41.6666666667%; + flex-basis: 41.6666666667%; } + + .col-lg-offset-4 { + margin-left: 33.3333333333%; } + + .col-lg-6, + .row.cols-lg-6 > * { + max-width: 50%; + flex-basis: 50%; } + + .col-lg-offset-5 { + margin-left: 41.6666666667%; } + + .col-lg-7, + .row.cols-lg-7 > * { + max-width: 58.3333333333%; + flex-basis: 58.3333333333%; } + + .col-lg-offset-6 { + margin-left: 50%; } + + .col-lg-8, + .row.cols-lg-8 > * { + max-width: 66.6666666667%; + flex-basis: 66.6666666667%; } + + .col-lg-offset-7 { + margin-left: 58.3333333333%; } + + .col-lg-9, + .row.cols-lg-9 > * { + max-width: 75%; + flex-basis: 75%; } + + .col-lg-offset-8 { + margin-left: 66.6666666667%; } + + .col-lg-10, + .row.cols-lg-10 > * { + max-width: 83.3333333333%; + flex-basis: 83.3333333333%; } + + .col-lg-offset-9 { + margin-left: 75%; } + + .col-lg-11, + .row.cols-lg-11 > * { + max-width: 91.6666666667%; + flex-basis: 91.6666666667%; } + + .col-lg-offset-10 { + margin-left: 83.3333333333%; } + + .col-lg-12, + .row.cols-lg-12 > * { + max-width: 100%; + flex-basis: 100%; } + + .col-lg-offset-11 { + margin-left: 91.6666666667%; } + + .col-lg-normal { + order: initial; } + + .col-lg-first { + order: -999; } + + .col-lg-last { + order: 999; } } +/* Card component CSS variable definitions */ +:root { + --card-back-color: #3cb4e6; + --card-fore-color: #03234b; + --card-border-color: #03234b; } + +.card { + display: flex; + flex-direction: column; + justify-content: space-between; + align-self: center; + position: relative; + width: 100%; + background: var(--card-back-color); + color: var(--card-fore-color); + border: 0.0714285714rem solid var(--card-border-color); + border-radius: var(--universal-border-radius); + margin: var(--universal-margin); + overflow: hidden; } + @media screen and (min-width: 320px) { + .card { + max-width: 320px; } } + .card > .sectione { + background: var(--card-back-color); + color: var(--card-fore-color); + box-sizing: border-box; + margin: 0; + border: 0; + border-radius: 0; + border-bottom: 0.0714285714rem solid var(--card-border-color); + padding: var(--universal-padding); + width: 100%; } + .card > .sectione.media { + height: 200px; + padding: 0; + -o-object-fit: cover; + object-fit: cover; } + .card > .sectione:last-child { + border-bottom: 0; } + +/* + Custom elements for card elements. +*/ +@media screen and (min-width: 240px) { + .card.small { + max-width: 240px; } } +@media screen and (min-width: 480px) { + .card.large { + max-width: 480px; } } +.card.fluid { + max-width: 100%; + width: auto; } + +.card.warning { + --card-back-color: #e5b8b7; + --card-fore-color: #3b234b; + --card-border-color: #8c0078; } + +.card.error { + --card-back-color: #464650; + --card-fore-color: #ffffff; + --card-border-color: #8c0078; } + +.card > .sectione.dark { + --card-back-color: #3b234b; + --card-fore-color: #ffffff; } + +.card > .sectione.double-padded { + padding: calc(1.5 * var(--universal-padding)); } + +/* + Definitions for forms and input elements. +*/ +/* Input_control module CSS variable definitions */ +:root { + --form-back-color: #ffe97f; + --form-fore-color: #03234b; + --form-border-color: #3cb4e6; + --input-back-color: #ffffff; + --input-fore-color: #03234b; + --input-border-color: #3cb4e6; + --input-focus-color: #0288d1; + --input-invalid-color: #d32f2f; + --button-back-color: #e2e2e2; + --button-hover-back-color: #dcdcdc; + --button-fore-color: #212121; + --button-border-color: transparent; + --button-hover-border-color: transparent; + --button-group-border-color: rgba(124, 124, 124, 0.54); } + +form { + background: var(--form-back-color); + color: var(--form-fore-color); + border: 0.0714285714rem solid var(--form-border-color); + border-radius: var(--universal-border-radius); + margin: var(--universal-margin); + padding: calc(2 * var(--universal-padding)) var(--universal-padding); } + +fieldset { + border: 0.0714285714rem solid var(--form-border-color); + border-radius: var(--universal-border-radius); + margin: calc(var(--universal-margin) / 4); + padding: var(--universal-padding); } + +legend { + box-sizing: border-box; + display: table; + max-width: 100%; + white-space: normal; + font-weight: 500; + padding: calc(var(--universal-padding) / 2); } + +label { + padding: calc(var(--universal-padding) / 2) var(--universal-padding); } + +.input-group { + display: inline-block; } + .input-group.fluid { + display: flex; + align-items: center; + justify-content: center; } + .input-group.fluid > input { + max-width: 100%; + flex-grow: 1; + flex-basis: 0px; } + @media screen and (max-width: 499px) { + .input-group.fluid { + align-items: stretch; + flex-direction: column; } } + .input-group.vertical { + display: flex; + align-items: stretch; + flex-direction: column; } + .input-group.vertical > input { + max-width: 100%; + flex-grow: 1; + flex-basis: 0px; } + +[type="number"]::-webkit-inner-spin-button, [type="number"]::-webkit-outer-spin-button { + height: auto; } + +[type="search"] { + -webkit-appearance: textfield; + outline-offset: -2px; } + +[type="search"]::-webkit-search-cancel-button, +[type="search"]::-webkit-search-decoration { + -webkit-appearance: none; } + +input:not([type]), [type="text"], [type="email"], [type="number"], [type="search"], +[type="password"], [type="url"], [type="tel"], [type="checkbox"], [type="radio"], textarea, select { + box-sizing: border-box; + background: var(--input-back-color); + color: var(--input-fore-color); + border: 0.0714285714rem solid var(--input-border-color); + border-radius: var(--universal-border-radius); + margin: calc(var(--universal-margin) / 2); + padding: var(--universal-padding) calc(1.5 * var(--universal-padding)); } + +input:not([type="button"]):not([type="submit"]):not([type="reset"]):hover, input:not([type="button"]):not([type="submit"]):not([type="reset"]):focus, textarea:hover, textarea:focus, select:hover, select:focus { + border-color: var(--input-focus-color); + box-shadow: none; } +input:not([type="button"]):not([type="submit"]):not([type="reset"]):invalid, input:not([type="button"]):not([type="submit"]):not([type="reset"]):focus:invalid, textarea:invalid, textarea:focus:invalid, select:invalid, select:focus:invalid { + border-color: var(--input-invalid-color); + box-shadow: none; } +input:not([type="button"]):not([type="submit"]):not([type="reset"])[readonly], textarea[readonly], select[readonly] { + background: var(--secondary-back-color); } + +select { + max-width: 100%; } + +option { + overflow: hidden; + text-overflow: ellipsis; } + +[type="checkbox"], [type="radio"] { + -webkit-appearance: none; + -moz-appearance: none; + appearance: none; + position: relative; + height: calc(1rem + var(--universal-padding) / 2); + width: calc(1rem + var(--universal-padding) / 2); + vertical-align: text-bottom; + padding: 0; + flex-basis: calc(1rem + var(--universal-padding) / 2) !important; + flex-grow: 0 !important; } + [type="checkbox"]:checked:before, [type="radio"]:checked:before { + position: absolute; } + +[type="checkbox"]:checked:before { + content: '\2713'; + font-family: sans-serif; + font-size: calc(1rem + var(--universal-padding) / 2); + top: calc(0rem - var(--universal-padding)); + left: calc(var(--universal-padding) / 4); } + +[type="radio"] { + border-radius: 100%; } + [type="radio"]:checked:before { + border-radius: 100%; + content: ''; + top: calc(0.0714285714rem + var(--universal-padding) / 2); + left: calc(0.0714285714rem + var(--universal-padding) / 2); + background: var(--input-fore-color); + width: 0.5rem; + height: 0.5rem; } + +:placeholder-shown { + color: var(--input-fore-color); } + +::-ms-placeholder { + color: var(--input-fore-color); + opacity: 0.54; } + +button::-moz-focus-inner, [type="button"]::-moz-focus-inner, [type="reset"]::-moz-focus-inner, [type="submit"]::-moz-focus-inner { + border-style: none; + padding: 0; } + +button, html [type="button"], [type="reset"], [type="submit"] { + -webkit-appearance: button; } + +button { + overflow: visible; + text-transform: none; } + +button, [type="button"], [type="submit"], [type="reset"], +a.button, label.button, .button, +a[role="button"], label[role="button"], [role="button"] { + display: inline-block; + background: var(--button-back-color); + color: var(--button-fore-color); + border: 0.0714285714rem solid var(--button-border-color); + border-radius: var(--universal-border-radius); + padding: var(--universal-padding) calc(1.5 * var(--universal-padding)); + margin: var(--universal-margin); + text-decoration: none; + cursor: pointer; + transition: background 0.3s; } + button:hover, button:focus, [type="button"]:hover, [type="button"]:focus, [type="submit"]:hover, [type="submit"]:focus, [type="reset"]:hover, [type="reset"]:focus, + a.button:hover, + a.button:focus, label.button:hover, label.button:focus, .button:hover, .button:focus, + a[role="button"]:hover, + a[role="button"]:focus, label[role="button"]:hover, label[role="button"]:focus, [role="button"]:hover, [role="button"]:focus { + background: var(--button-hover-back-color); + border-color: var(--button-hover-border-color); } + +input:disabled, input[disabled], textarea:disabled, textarea[disabled], select:disabled, select[disabled], button:disabled, button[disabled], .button:disabled, .button[disabled], [role="button"]:disabled, [role="button"][disabled] { + cursor: not-allowed; + opacity: 0.75; } + +.button-group { + display: flex; + border: 0.0714285714rem solid var(--button-group-border-color); + border-radius: var(--universal-border-radius); + margin: var(--universal-margin); } + .button-group > button, .button-group [type="button"], .button-group > [type="submit"], .button-group > [type="reset"], .button-group > .button, .button-group > [role="button"] { + margin: 0; + max-width: 100%; + flex: 1 1 auto; + text-align: center; + border: 0; + border-radius: 0; + box-shadow: none; } + .button-group > :not(:first-child) { + border-left: 0.0714285714rem solid var(--button-group-border-color); } + @media screen and (max-width: 499px) { + .button-group { + flex-direction: column; } + .button-group > :not(:first-child) { + border: 0; + border-top: 0.0714285714rem solid var(--button-group-border-color); } } + +/* + Custom elements for forms and input elements. +*/ +button.primary, [type="button"].primary, [type="submit"].primary, [type="reset"].primary, .button.primary, [role="button"].primary { + --button-back-color: #1976d2; + --button-fore-color: #f8f8f8; } + button.primary:hover, button.primary:focus, [type="button"].primary:hover, [type="button"].primary:focus, [type="submit"].primary:hover, [type="submit"].primary:focus, [type="reset"].primary:hover, [type="reset"].primary:focus, .button.primary:hover, .button.primary:focus, [role="button"].primary:hover, [role="button"].primary:focus { + --button-hover-back-color: #1565c0; } + +button.secondary, [type="button"].secondary, [type="submit"].secondary, [type="reset"].secondary, .button.secondary, [role="button"].secondary { + --button-back-color: #d32f2f; + --button-fore-color: #f8f8f8; } + button.secondary:hover, button.secondary:focus, [type="button"].secondary:hover, [type="button"].secondary:focus, [type="submit"].secondary:hover, [type="submit"].secondary:focus, [type="reset"].secondary:hover, [type="reset"].secondary:focus, .button.secondary:hover, .button.secondary:focus, [role="button"].secondary:hover, [role="button"].secondary:focus { + --button-hover-back-color: #c62828; } + +button.tertiary, [type="button"].tertiary, [type="submit"].tertiary, [type="reset"].tertiary, .button.tertiary, [role="button"].tertiary { + --button-back-color: #308732; + --button-fore-color: #f8f8f8; } + button.tertiary:hover, button.tertiary:focus, [type="button"].tertiary:hover, [type="button"].tertiary:focus, [type="submit"].tertiary:hover, [type="submit"].tertiary:focus, [type="reset"].tertiary:hover, [type="reset"].tertiary:focus, .button.tertiary:hover, .button.tertiary:focus, [role="button"].tertiary:hover, [role="button"].tertiary:focus { + --button-hover-back-color: #277529; } + +button.inverse, [type="button"].inverse, [type="submit"].inverse, [type="reset"].inverse, .button.inverse, [role="button"].inverse { + --button-back-color: #212121; + --button-fore-color: #f8f8f8; } + button.inverse:hover, button.inverse:focus, [type="button"].inverse:hover, [type="button"].inverse:focus, [type="submit"].inverse:hover, [type="submit"].inverse:focus, [type="reset"].inverse:hover, [type="reset"].inverse:focus, .button.inverse:hover, .button.inverse:focus, [role="button"].inverse:hover, [role="button"].inverse:focus { + --button-hover-back-color: #111; } + +button.small, [type="button"].small, [type="submit"].small, [type="reset"].small, .button.small, [role="button"].small { + padding: calc(0.5 * var(--universal-padding)) calc(0.75 * var(--universal-padding)); + margin: var(--universal-margin); } + +button.large, [type="button"].large, [type="submit"].large, [type="reset"].large, .button.large, [role="button"].large { + padding: calc(1.5 * var(--universal-padding)) calc(2 * var(--universal-padding)); + margin: var(--universal-margin); } + +/* + Definitions for navigation elements. +*/ +/* Navigation module CSS variable definitions */ +:root { + --header-back-color: #03234b; + --header-hover-back-color: #ffd200; + --header-fore-color: #ffffff; + --header-border-color: #3cb4e6; + --nav-back-color: #ffffff; + --nav-hover-back-color: #ffe97f; + --nav-fore-color: #e6007e; + --nav-border-color: #3cb4e6; + --nav-link-color: #3cb4e6; + --footer-fore-color: #ffffff; + --footer-back-color: #03234b; + --footer-border-color: #3cb4e6; + --footer-link-color: #3cb4e6; + --drawer-back-color: #ffffff; + --drawer-hover-back-color: #ffe97f; + --drawer-border-color: #3cb4e6; + --drawer-close-color: #e6007e; } + +header { + height: 2.75rem; + background: var(--header-back-color); + color: var(--header-fore-color); + border-bottom: 0.0714285714rem solid var(--header-border-color); + padding: calc(var(--universal-padding) / 4) 0; + white-space: nowrap; + overflow-x: auto; + overflow-y: hidden; } + header.row { + box-sizing: content-box; } + header .logo { + color: var(--header-fore-color); + font-size: 1.75rem; + padding: var(--universal-padding) calc(2 * var(--universal-padding)); + text-decoration: none; } + header button, header [type="button"], header .button, header [role="button"] { + box-sizing: border-box; + position: relative; + top: calc(0rem - var(--universal-padding) / 4); + height: calc(3.1875rem + var(--universal-padding) / 2); + background: var(--header-back-color); + line-height: calc(3.1875rem - var(--universal-padding) * 1.5); + text-align: center; + color: var(--header-fore-color); + border: 0; + border-radius: 0; + margin: 0; + text-transform: uppercase; } + header button:hover, header button:focus, header [type="button"]:hover, header [type="button"]:focus, header .button:hover, header .button:focus, header [role="button"]:hover, header [role="button"]:focus { + background: var(--header-hover-back-color); } + +nav { + background: var(--nav-back-color); + color: var(--nav-fore-color); + border: 0.0714285714rem solid var(--nav-border-color); + border-radius: var(--universal-border-radius); + margin: var(--universal-margin); } + nav * { + padding: var(--universal-padding) calc(1.5 * var(--universal-padding)); } + nav a, nav a:visited { + display: block; + color: var(--nav-link-color); + border-radius: var(--universal-border-radius); + transition: background 0.3s; } + nav a:hover, nav a:focus, nav a:visited:hover, nav a:visited:focus { + text-decoration: none; + background: var(--nav-hover-back-color); } + nav .sublink-1 { + position: relative; + margin-left: calc(2 * var(--universal-padding)); } + nav .sublink-1:before { + position: absolute; + left: calc(var(--universal-padding) - 1 * var(--universal-padding)); + top: -0.0714285714rem; + content: ''; + height: 100%; + border: 0.0714285714rem solid var(--nav-border-color); + border-left: 0; } + nav .sublink-2 { + position: relative; + margin-left: calc(4 * var(--universal-padding)); } + nav .sublink-2:before { + position: absolute; + left: calc(var(--universal-padding) - 3 * var(--universal-padding)); + top: -0.0714285714rem; + content: ''; + height: 100%; + border: 0.0714285714rem solid var(--nav-border-color); + border-left: 0; } + +footer { + background: var(--footer-back-color); + color: var(--footer-fore-color); + border-top: 0.0714285714rem solid var(--footer-border-color); + padding: calc(2 * var(--universal-padding)) var(--universal-padding); + font-size: 0.875rem; } + footer a, footer a:visited { + color: var(--footer-link-color); } + +header.sticky { + position: -webkit-sticky; + position: sticky; + z-index: 1101; + top: 0; } + +footer.sticky { + position: -webkit-sticky; + position: sticky; + z-index: 1101; + bottom: 0; } + +.drawer-toggle:before { + display: inline-block; + position: relative; + vertical-align: bottom; + content: '\00a0\2261\00a0'; + font-family: sans-serif; + font-size: 1.5em; } +@media screen and (min-width: 500px) { + .drawer-toggle:not(.persistent) { + display: none; } } + +[type="checkbox"].drawer { + height: 1px; + width: 1px; + margin: -1px; + overflow: hidden; + position: absolute; + clip: rect(0 0 0 0); + -webkit-clip-path: inset(100%); + clip-path: inset(100%); } + [type="checkbox"].drawer + * { + display: block; + box-sizing: border-box; + position: fixed; + top: 0; + width: 320px; + height: 100vh; + overflow-y: auto; + background: var(--drawer-back-color); + border: 0.0714285714rem solid var(--drawer-border-color); + border-radius: 0; + margin: 0; + z-index: 1110; + right: -320px; + transition: right 0.3s; } + [type="checkbox"].drawer + * .drawer-close { + position: absolute; + top: var(--universal-margin); + right: var(--universal-margin); + z-index: 1111; + width: 2rem; + height: 2rem; + border-radius: var(--universal-border-radius); + padding: var(--universal-padding); + margin: 0; + cursor: pointer; + transition: background 0.3s; } + [type="checkbox"].drawer + * .drawer-close:before { + display: block; + content: '\00D7'; + color: var(--drawer-close-color); + position: relative; + font-family: sans-serif; + font-size: 2rem; + line-height: 1; + text-align: center; } + [type="checkbox"].drawer + * .drawer-close:hover, [type="checkbox"].drawer + * .drawer-close:focus { + background: var(--drawer-hover-back-color); } + @media screen and (max-width: 320px) { + [type="checkbox"].drawer + * { + width: 100%; } } + [type="checkbox"].drawer:checked + * { + right: 0; } + @media screen and (min-width: 500px) { + [type="checkbox"].drawer:not(.persistent) + * { + position: static; + height: 100%; + z-index: 1100; } + [type="checkbox"].drawer:not(.persistent) + * .drawer-close { + display: none; } } + +/* + Definitions for the responsive table component. +*/ +/* Table module CSS variable definitions. */ +:root { + --table-border-color: #03234b; + --table-border-separator-color: #03234b; + --table-head-back-color: #03234b; + --table-head-fore-color: #ffffff; + --table-body-back-color: #ffffff; + --table-body-fore-color: #03234b; + --table-body-alt-back-color: #f4f4f4; } + +table { + border-collapse: separate; + border-spacing: 0; + margin: 0; + display: flex; + flex: 0 1 auto; + flex-flow: row wrap; + padding: var(--universal-padding); + padding-top: 0; } + table caption { + font-size: 1rem; + margin: calc(2 * var(--universal-margin)) 0; + max-width: 100%; + flex: 0 0 100%; } + table thead, table tbody { + display: flex; + flex-flow: row wrap; + border: 0.0714285714rem solid var(--table-border-color); } + table thead { + z-index: 999; + border-radius: var(--universal-border-radius) var(--universal-border-radius) 0 0; + border-bottom: 0.0714285714rem solid var(--table-border-separator-color); } + table tbody { + border-top: 0; + margin-top: calc(0 - var(--universal-margin)); + border-radius: 0 0 var(--universal-border-radius) var(--universal-border-radius); } + table tr { + display: flex; + padding: 0; } + table th, table td { + padding: calc(0.5 * var(--universal-padding)); + font-size: 0.9rem; } + table th { + text-align: left; + background: var(--table-head-back-color); + color: var(--table-head-fore-color); } + table td { + background: var(--table-body-back-color); + color: var(--table-body-fore-color); + border-top: 0.0714285714rem solid var(--table-border-color); } + +table:not(.horizontal) { + overflow: auto; + max-height: 100%; } + table:not(.horizontal) thead, table:not(.horizontal) tbody { + max-width: 100%; + flex: 0 0 100%; } + table:not(.horizontal) tr { + flex-flow: row wrap; + flex: 0 0 100%; } + table:not(.horizontal) th, table:not(.horizontal) td { + flex: 1 0 0%; + overflow: hidden; + text-overflow: ellipsis; } + table:not(.horizontal) thead { + position: sticky; + top: 0; } + table:not(.horizontal) tbody tr:first-child td { + border-top: 0; } + +table.horizontal { + border: 0; } + table.horizontal thead, table.horizontal tbody { + border: 0; + flex: .2 0 0; + flex-flow: row nowrap; } + table.horizontal tbody { + overflow: auto; + justify-content: space-between; + flex: .8 0 0; + margin-left: 0; + padding-bottom: calc(var(--universal-padding) / 4); } + table.horizontal tr { + flex-direction: column; + flex: 1 0 auto; } + table.horizontal th, table.horizontal td { + width: auto; + border: 0; + border-bottom: 0.0714285714rem solid var(--table-border-color); } + table.horizontal th:not(:first-child), table.horizontal td:not(:first-child) { + border-top: 0; } + table.horizontal th { + text-align: right; + border-left: 0.0714285714rem solid var(--table-border-color); + border-right: 0.0714285714rem solid var(--table-border-separator-color); } + table.horizontal thead tr:first-child { + padding-left: 0; } + table.horizontal th:first-child, table.horizontal td:first-child { + border-top: 0.0714285714rem solid var(--table-border-color); } + table.horizontal tbody tr:last-child td { + border-right: 0.0714285714rem solid var(--table-border-color); } + table.horizontal tbody tr:last-child td:first-child { + border-top-right-radius: 0.25rem; } + table.horizontal tbody tr:last-child td:last-child { + border-bottom-right-radius: 0.25rem; } + table.horizontal thead tr:first-child th:first-child { + border-top-left-radius: 0.25rem; } + table.horizontal thead tr:first-child th:last-child { + border-bottom-left-radius: 0.25rem; } + +@media screen and (max-width: 499px) { + table, table.horizontal { + border-collapse: collapse; + border: 0; + width: 100%; + display: table; } + table thead, table th, table.horizontal thead, table.horizontal th { + border: 0; + height: 1px; + width: 1px; + margin: -1px; + overflow: hidden; + padding: 0; + position: absolute; + clip: rect(0 0 0 0); + -webkit-clip-path: inset(100%); + clip-path: inset(100%); } + table tbody, table.horizontal tbody { + border: 0; + display: table-row-group; } + table tr, table.horizontal tr { + display: block; + border: 0.0714285714rem solid var(--table-border-color); + border-radius: var(--universal-border-radius); + background: #ffffff; + padding: var(--universal-padding); + margin: var(--universal-margin); + margin-bottom: calc(1 * var(--universal-margin)); } + table th, table td, table.horizontal th, table.horizontal td { + width: auto; } + table td, table.horizontal td { + display: block; + border: 0; + text-align: right; } + table td:before, table.horizontal td:before { + content: attr(data-label); + float: left; + font-weight: 600; } + table th:first-child, table td:first-child, table.horizontal th:first-child, table.horizontal td:first-child { + border-top: 0; } + table tbody tr:last-child td, table.horizontal tbody tr:last-child td { + border-right: 0; } } +table tr:nth-of-type(2n) > td { + background: var(--table-body-alt-back-color); } + +@media screen and (max-width: 500px) { + table tr:nth-of-type(2n) { + background: var(--table-body-alt-back-color); } } +:root { + --table-body-hover-back-color: #90caf9; } + +table.hoverable tr:hover, table.hoverable tr:hover > td, table.hoverable tr:focus, table.hoverable tr:focus > td { + background: var(--table-body-hover-back-color); } + +@media screen and (max-width: 500px) { + table.hoverable tr:hover, table.hoverable tr:hover > td, table.hoverable tr:focus, table.hoverable tr:focus > td { + background: var(--table-body-hover-back-color); } } +/* + Definitions for contextual background elements, toasts and tooltips. +*/ +/* Contextual module CSS variable definitions */ +:root { + --mark-back-color: #3cb4e6; + --mark-fore-color: #ffffff; } + +mark { + background: var(--mark-back-color); + color: var(--mark-fore-color); + font-size: 0.95em; + line-height: 1em; + border-radius: var(--universal-border-radius); + padding: calc(var(--universal-padding) / 4) var(--universal-padding); } + mark.inline-block { + display: inline-block; + font-size: 1em; + line-height: 1.4; + padding: calc(var(--universal-padding) / 2) var(--universal-padding); } + +:root { + --toast-back-color: #424242; + --toast-fore-color: #fafafa; } + +.toast { + position: fixed; + bottom: calc(var(--universal-margin) * 3); + left: 50%; + transform: translate(-50%, -50%); + z-index: 1111; + color: var(--toast-fore-color); + background: var(--toast-back-color); + border-radius: calc(var(--universal-border-radius) * 16); + padding: var(--universal-padding) calc(var(--universal-padding) * 3); } + +:root { + --tooltip-back-color: #212121; + --tooltip-fore-color: #fafafa; } + +.tooltip { + position: relative; + display: inline-block; } + .tooltip:before, .tooltip:after { + position: absolute; + opacity: 0; + clip: rect(0 0 0 0); + -webkit-clip-path: inset(100%); + clip-path: inset(100%); + transition: all 0.3s; + z-index: 1010; + left: 50%; } + .tooltip:not(.bottom):before, .tooltip:not(.bottom):after { + bottom: 75%; } + .tooltip.bottom:before, .tooltip.bottom:after { + top: 75%; } + .tooltip:hover:before, .tooltip:hover:after, .tooltip:focus:before, .tooltip:focus:after { + opacity: 1; + clip: auto; + -webkit-clip-path: inset(0%); + clip-path: inset(0%); } + .tooltip:before { + content: ''; + background: transparent; + border: var(--universal-margin) solid transparent; + left: calc(50% - var(--universal-margin)); } + .tooltip:not(.bottom):before { + border-top-color: #212121; } + .tooltip.bottom:before { + border-bottom-color: #212121; } + .tooltip:after { + content: attr(aria-label); + color: var(--tooltip-fore-color); + background: var(--tooltip-back-color); + border-radius: var(--universal-border-radius); + padding: var(--universal-padding); + white-space: nowrap; + transform: translateX(-50%); } + .tooltip:not(.bottom):after { + margin-bottom: calc(2 * var(--universal-margin)); } + .tooltip.bottom:after { + margin-top: calc(2 * var(--universal-margin)); } + +:root { + --modal-overlay-color: rgba(0, 0, 0, 0.45); + --modal-close-color: #e6007e; + --modal-close-hover-color: #ffe97f; } + +[type="checkbox"].modal { + height: 1px; + width: 1px; + margin: -1px; + overflow: hidden; + position: absolute; + clip: rect(0 0 0 0); + -webkit-clip-path: inset(100%); + clip-path: inset(100%); } + [type="checkbox"].modal + div { + position: fixed; + top: 0; + left: 0; + display: none; + width: 100vw; + height: 100vh; + background: var(--modal-overlay-color); } + [type="checkbox"].modal + div .card { + margin: 0 auto; + max-height: 50vh; + overflow: auto; } + [type="checkbox"].modal + div .card .modal-close { + position: absolute; + top: 0; + right: 0; + width: 1.75rem; + height: 1.75rem; + border-radius: var(--universal-border-radius); + padding: var(--universal-padding); + margin: 0; + cursor: pointer; + transition: background 0.3s; } + [type="checkbox"].modal + div .card .modal-close:before { + display: block; + content: '\00D7'; + color: var(--modal-close-color); + position: relative; + font-family: sans-serif; + font-size: 1.75rem; + line-height: 1; + text-align: center; } + [type="checkbox"].modal + div .card .modal-close:hover, [type="checkbox"].modal + div .card .modal-close:focus { + background: var(--modal-close-hover-color); } + [type="checkbox"].modal:checked + div { + display: flex; + flex: 0 1 auto; + z-index: 1200; } + [type="checkbox"].modal:checked + div .card .modal-close { + z-index: 1211; } + +:root { + --collapse-label-back-color: #03234b; + --collapse-label-fore-color: #ffffff; + --collapse-label-hover-back-color: #3cb4e6; + --collapse-selected-label-back-color: #3cb4e6; + --collapse-border-color: var(--collapse-label-back-color); + --collapse-selected-border-color: #ceecf8; + --collapse-content-back-color: #ffffff; + --collapse-selected-label-border-color: #3cb4e6; } + +.collapse { + width: calc(100% - 2 * var(--universal-margin)); + opacity: 1; + display: flex; + flex-direction: column; + margin: var(--universal-margin); + border-radius: var(--universal-border-radius); } + .collapse > [type="radio"], .collapse > [type="checkbox"] { + height: 1px; + width: 1px; + margin: -1px; + overflow: hidden; + position: absolute; + clip: rect(0 0 0 0); + -webkit-clip-path: inset(100%); + clip-path: inset(100%); } + .collapse > label { + flex-grow: 1; + display: inline-block; + height: 1.25rem; + cursor: pointer; + transition: background 0.2s; + color: var(--collapse-label-fore-color); + background: var(--collapse-label-back-color); + border: 0.0714285714rem solid var(--collapse-selected-border-color); + padding: calc(1.25 * var(--universal-padding)); } + .collapse > label:hover, .collapse > label:focus { + background: var(--collapse-label-hover-back-color); } + .collapse > label + div { + flex-basis: auto; + height: 1px; + width: 1px; + margin: -1px; + overflow: hidden; + position: absolute; + clip: rect(0 0 0 0); + -webkit-clip-path: inset(100%); + clip-path: inset(100%); + transition: max-height 0.3s; + max-height: 1px; } + .collapse > :checked + label { + background: var(--collapse-selected-label-back-color); + border-color: var(--collapse-selected-label-border-color); } + .collapse > :checked + label + div { + box-sizing: border-box; + position: relative; + width: 100%; + height: auto; + overflow: auto; + margin: 0; + background: var(--collapse-content-back-color); + border: 0.0714285714rem solid var(--collapse-selected-border-color); + border-top: 0; + padding: var(--universal-padding); + clip: auto; + -webkit-clip-path: inset(0%); + clip-path: inset(0%); + max-height: 100%; } + .collapse > label:not(:first-of-type) { + border-top: 0; } + .collapse > label:first-of-type { + border-radius: var(--universal-border-radius) var(--universal-border-radius) 0 0; } + .collapse > label:last-of-type:not(:first-of-type) { + border-radius: 0 0 var(--universal-border-radius) var(--universal-border-radius); } + .collapse > label:last-of-type:first-of-type { + border-radius: var(--universal-border-radius); } + .collapse > :checked:last-of-type:not(:first-of-type) + label { + border-radius: 0; } + .collapse > :checked:last-of-type + label + div { + border-radius: 0 0 var(--universal-border-radius) var(--universal-border-radius); } + +/* + Custom elements for contextual background elements, toasts and tooltips. +*/ +mark.tertiary { + --mark-back-color: #3cb4e6; } + +mark.tag { + padding: calc(var(--universal-padding)/2) var(--universal-padding); + border-radius: 1em; } + +/* + Definitions for progress elements and spinners. +*/ +/* Progress module CSS variable definitions */ +:root { + --progress-back-color: #3cb4e6; + --progress-fore-color: #555; } + +progress { + display: block; + vertical-align: baseline; + -webkit-appearance: none; + -moz-appearance: none; + appearance: none; + height: 0.75rem; + width: calc(100% - 2 * var(--universal-margin)); + margin: var(--universal-margin); + border: 0; + border-radius: calc(2 * var(--universal-border-radius)); + background: var(--progress-back-color); + color: var(--progress-fore-color); } + progress::-webkit-progress-value { + background: var(--progress-fore-color); + border-top-left-radius: calc(2 * var(--universal-border-radius)); + border-bottom-left-radius: calc(2 * var(--universal-border-radius)); } + progress::-webkit-progress-bar { + background: var(--progress-back-color); } + progress::-moz-progress-bar { + background: var(--progress-fore-color); + border-top-left-radius: calc(2 * var(--universal-border-radius)); + border-bottom-left-radius: calc(2 * var(--universal-border-radius)); } + progress[value="1000"]::-webkit-progress-value { + border-radius: calc(2 * var(--universal-border-radius)); } + progress[value="1000"]::-moz-progress-bar { + border-radius: calc(2 * var(--universal-border-radius)); } + progress.inline { + display: inline-block; + vertical-align: middle; + width: 60%; } + +:root { + --spinner-back-color: #ddd; + --spinner-fore-color: #555; } + +@keyframes spinner-donut-anim { + 0% { + transform: rotate(0deg); } + 100% { + transform: rotate(360deg); } } +.spinner { + display: inline-block; + margin: var(--universal-margin); + border: 0.25rem solid var(--spinner-back-color); + border-left: 0.25rem solid var(--spinner-fore-color); + border-radius: 50%; + width: 1.25rem; + height: 1.25rem; + animation: spinner-donut-anim 1.2s linear infinite; } + +/* + Custom elements for progress bars and spinners. +*/ +progress.primary { + --progress-fore-color: #1976d2; } + +progress.secondary { + --progress-fore-color: #d32f2f; } + +progress.tertiary { + --progress-fore-color: #308732; } + +.spinner.primary { + --spinner-fore-color: #1976d2; } + +.spinner.secondary { + --spinner-fore-color: #d32f2f; } + +.spinner.tertiary { + --spinner-fore-color: #308732; } + +/* + Definitions for icons - powered by Feather (https://feathericons.com/). +*/ +span[class^='icon-'] { + display: inline-block; + height: 1em; + width: 1em; + vertical-align: -0.125em; + background-size: contain; + margin: 0 calc(var(--universal-margin) / 4); } + span[class^='icon-'].secondary { + -webkit-filter: invert(25%); + filter: invert(25%); } + span[class^='icon-'].inverse { + -webkit-filter: invert(100%); + filter: invert(100%); } + +span.icon-alert { + background-image: url("data:image/svg+xml,%3Csvg xmlns='http://www.w3.org/2000/svg' width='24' height='24' viewBox='0 0 24 24' fill='none' stroke='%2303234b' stroke-width='2' stroke-linecap='round' stroke-linejoin='round'%3E%3Ccircle cx='12' cy='12' r='10'%3E%3C/circle%3E%3Cline x1='12' y1='8' x2='12' y2='12'%3E%3C/line%3E%3Cline x1='12' y1='16' x2='12' y2='16'%3E%3C/line%3E%3C/svg%3E"); } +span.icon-bookmark { + background-image: url("data:image/svg+xml,%3Csvg xmlns='http://www.w3.org/2000/svg' width='24' height='24' viewBox='0 0 24 24' fill='none' stroke='%2303234b' stroke-width='2' stroke-linecap='round' stroke-linejoin='round'%3E%3Cpath d='M19 21l-7-5-7 5V5a2 2 0 0 1 2-2h10a2 2 0 0 1 2 2z'%3E%3C/path%3E%3C/svg%3E"); } +span.icon-calendar { + background-image: url("data:image/svg+xml,%3Csvg xmlns='http://www.w3.org/2000/svg' width='24' height='24' viewBox='0 0 24 24' fill='none' stroke='%2303234b' stroke-width='2' stroke-linecap='round' stroke-linejoin='round'%3E%3Crect x='3' y='4' width='18' height='18' rx='2' ry='2'%3E%3C/rect%3E%3Cline x1='16' y1='2' x2='16' y2='6'%3E%3C/line%3E%3Cline x1='8' y1='2' x2='8' y2='6'%3E%3C/line%3E%3Cline x1='3' y1='10' x2='21' y2='10'%3E%3C/line%3E%3C/svg%3E"); } +span.icon-credit { + background-image: url("data:image/svg+xml,%3Csvg xmlns='http://www.w3.org/2000/svg' width='24' height='24' viewBox='0 0 24 24' fill='none' stroke='%2303234b' stroke-width='2' stroke-linecap='round' stroke-linejoin='round'%3E%3Crect x='1' y='4' width='22' height='16' rx='2' ry='2'%3E%3C/rect%3E%3Cline x1='1' y1='10' x2='23' y2='10'%3E%3C/line%3E%3C/svg%3E"); } +span.icon-edit { + background-image: url("data:image/svg+xml,%3Csvg xmlns='http://www.w3.org/2000/svg' width='24' height='24' viewBox='0 0 24 24' fill='none' stroke='%2303234b' stroke-width='2' stroke-linecap='round' stroke-linejoin='round'%3E%3Cpath d='M20 14.66V20a2 2 0 0 1-2 2H4a2 2 0 0 1-2-2V6a2 2 0 0 1 2-2h5.34'%3E%3C/path%3E%3Cpolygon points='18 2 22 6 12 16 8 16 8 12 18 2'%3E%3C/polygon%3E%3C/svg%3E"); } +span.icon-link { + background-image: url("data:image/svg+xml,%3Csvg xmlns='http://www.w3.org/2000/svg' width='24' height='24' viewBox='0 0 24 24' fill='none' stroke='%2303234b' stroke-width='2' stroke-linecap='round' stroke-linejoin='round'%3E%3Cpath d='M18 13v6a2 2 0 0 1-2 2H5a2 2 0 0 1-2-2V8a2 2 0 0 1 2-2h6'%3E%3C/path%3E%3Cpolyline points='15 3 21 3 21 9'%3E%3C/polyline%3E%3Cline x1='10' y1='14' x2='21' y2='3'%3E%3C/line%3E%3C/svg%3E"); } +span.icon-help { + background-image: url("data:image/svg+xml,%3Csvg xmlns='http://www.w3.org/2000/svg' width='24' height='24' viewBox='0 0 24 24' fill='none' stroke='%2303234b' stroke-width='2' stroke-linecap='round' stroke-linejoin='round'%3E%3Cpath d='M9.09 9a3 3 0 0 1 5.83 1c0 2-3 3-3 3'%3E%3C/path%3E%3Ccircle cx='12' cy='12' r='10'%3E%3C/circle%3E%3Cline x1='12' y1='17' x2='12' y2='17'%3E%3C/line%3E%3C/svg%3E"); } +span.icon-home { + background-image: url("data:image/svg+xml,%3Csvg xmlns='http://www.w3.org/2000/svg' width='24' height='24' viewBox='0 0 24 24' fill='none' stroke='%2303234b' stroke-width='2' stroke-linecap='round' stroke-linejoin='round'%3E%3Cpath d='M3 9l9-7 9 7v11a2 2 0 0 1-2 2H5a2 2 0 0 1-2-2z'%3E%3C/path%3E%3Cpolyline points='9 22 9 12 15 12 15 22'%3E%3C/polyline%3E%3C/svg%3E"); } +span.icon-info { + background-image: url("data:image/svg+xml,%3Csvg xmlns='http://www.w3.org/2000/svg' width='24' height='24' viewBox='0 0 24 24' fill='none' stroke='%2303234b' stroke-width='2' stroke-linecap='round' stroke-linejoin='round'%3E%3Ccircle cx='12' cy='12' r='10'%3E%3C/circle%3E%3Cline x1='12' y1='16' x2='12' y2='12'%3E%3C/line%3E%3Cline x1='12' y1='8' x2='12' y2='8'%3E%3C/line%3E%3C/svg%3E"); } +span.icon-lock { + background-image: url("data:image/svg+xml,%3Csvg xmlns='http://www.w3.org/2000/svg' width='24' height='24' viewBox='0 0 24 24' fill='none' stroke='%2303234b' stroke-width='2' stroke-linecap='round' stroke-linejoin='round'%3E%3Crect x='3' y='11' width='18' height='11' rx='2' ry='2'%3E%3C/rect%3E%3Cpath d='M7 11V7a5 5 0 0 1 10 0v4'%3E%3C/path%3E%3C/svg%3E"); } +span.icon-mail { + background-image: url("data:image/svg+xml,%3Csvg xmlns='http://www.w3.org/2000/svg' width='24' height='24' viewBox='0 0 24 24' fill='none' stroke='%2303234b' stroke-width='2' stroke-linecap='round' stroke-linejoin='round'%3E%3Cpath d='M4 4h16c1.1 0 2 .9 2 2v12c0 1.1-.9 2-2 2H4c-1.1 0-2-.9-2-2V6c0-1.1.9-2 2-2z'%3E%3C/path%3E%3Cpolyline points='22,6 12,13 2,6'%3E%3C/polyline%3E%3C/svg%3E"); } +span.icon-location { + background-image: url("data:image/svg+xml,%3Csvg xmlns='http://www.w3.org/2000/svg' width='24' height='24' viewBox='0 0 24 24' fill='none' stroke='%2303234b' stroke-width='2' stroke-linecap='round' stroke-linejoin='round'%3E%3Cpath d='M21 10c0 7-9 13-9 13s-9-6-9-13a9 9 0 0 1 18 0z'%3E%3C/path%3E%3Ccircle cx='12' cy='10' r='3'%3E%3C/circle%3E%3C/svg%3E"); } +span.icon-phone { + background-image: url("data:image/svg+xml,%3Csvg xmlns='http://www.w3.org/2000/svg' width='24' height='24' viewBox='0 0 24 24' fill='none' stroke='%2303234b' stroke-width='2' stroke-linecap='round' stroke-linejoin='round'%3E%3Cpath d='M22 16.92v3a2 2 0 0 1-2.18 2 19.79 19.79 0 0 1-8.63-3.07 19.5 19.5 0 0 1-6-6 19.79 19.79 0 0 1-3.07-8.67A2 2 0 0 1 4.11 2h3a2 2 0 0 1 2 1.72 12.84 12.84 0 0 0 .7 2.81 2 2 0 0 1-.45 2.11L8.09 9.91a16 16 0 0 0 6 6l1.27-1.27a2 2 0 0 1 2.11-.45 12.84 12.84 0 0 0 2.81.7A2 2 0 0 1 22 16.92z'%3E%3C/path%3E%3C/svg%3E"); } +span.icon-rss { + background-image: url("data:image/svg+xml,%3Csvg xmlns='http://www.w3.org/2000/svg' width='24' height='24' viewBox='0 0 24 24' fill='none' stroke='%2303234b' stroke-width='2' stroke-linecap='round' stroke-linejoin='round'%3E%3Cpath d='M4 11a9 9 0 0 1 9 9'%3E%3C/path%3E%3Cpath d='M4 4a16 16 0 0 1 16 16'%3E%3C/path%3E%3Ccircle cx='5' cy='19' r='1'%3E%3C/circle%3E%3C/svg%3E"); } +span.icon-search { + background-image: url("data:image/svg+xml,%3Csvg xmlns='http://www.w3.org/2000/svg' width='24' height='24' viewBox='0 0 24 24' fill='none' stroke='%2303234b' stroke-width='2' stroke-linecap='round' stroke-linejoin='round'%3E%3Ccircle cx='11' cy='11' r='8'%3E%3C/circle%3E%3Cline x1='21' y1='21' x2='16.65' y2='16.65'%3E%3C/line%3E%3C/svg%3E"); } +span.icon-settings { + background-image: url("data:image/svg+xml,%3Csvg xmlns='http://www.w3.org/2000/svg' width='24' height='24' viewBox='0 0 24 24' fill='none' stroke='%2303234b' stroke-width='2' stroke-linecap='round' stroke-linejoin='round'%3E%3Ccircle cx='12' cy='12' r='3'%3E%3C/circle%3E%3Cpath d='M19.4 15a1.65 1.65 0 0 0 .33 1.82l.06.06a2 2 0 0 1 0 2.83 2 2 0 0 1-2.83 0l-.06-.06a1.65 1.65 0 0 0-1.82-.33 1.65 1.65 0 0 0-1 1.51V21a2 2 0 0 1-2 2 2 2 0 0 1-2-2v-.09A1.65 1.65 0 0 0 9 19.4a1.65 1.65 0 0 0-1.82.33l-.06.06a2 2 0 0 1-2.83 0 2 2 0 0 1 0-2.83l.06-.06a1.65 1.65 0 0 0 .33-1.82 1.65 1.65 0 0 0-1.51-1H3a2 2 0 0 1-2-2 2 2 0 0 1 2-2h.09A1.65 1.65 0 0 0 4.6 9a1.65 1.65 0 0 0-.33-1.82l-.06-.06a2 2 0 0 1 0-2.83 2 2 0 0 1 2.83 0l.06.06a1.65 1.65 0 0 0 1.82.33H9a1.65 1.65 0 0 0 1-1.51V3a2 2 0 0 1 2-2 2 2 0 0 1 2 2v.09a1.65 1.65 0 0 0 1 1.51 1.65 1.65 0 0 0 1.82-.33l.06-.06a2 2 0 0 1 2.83 0 2 2 0 0 1 0 2.83l-.06.06a1.65 1.65 0 0 0-.33 1.82V9a1.65 1.65 0 0 0 1.51 1H21a2 2 0 0 1 2 2 2 2 0 0 1-2 2h-.09a1.65 1.65 0 0 0-1.51 1z'%3E%3C/path%3E%3C/svg%3E"); } +span.icon-share { + background-image: url("data:image/svg+xml,%3Csvg xmlns='http://www.w3.org/2000/svg' width='24' height='24' viewBox='0 0 24 24' fill='none' stroke='%2303234b' stroke-width='2' stroke-linecap='round' stroke-linejoin='round'%3E%3Ccircle cx='18' cy='5' r='3'%3E%3C/circle%3E%3Ccircle cx='6' cy='12' r='3'%3E%3C/circle%3E%3Ccircle cx='18' cy='19' r='3'%3E%3C/circle%3E%3Cline x1='8.59' y1='13.51' x2='15.42' y2='17.49'%3E%3C/line%3E%3Cline x1='15.41' y1='6.51' x2='8.59' y2='10.49'%3E%3C/line%3E%3C/svg%3E"); } +span.icon-cart { + background-image: url("data:image/svg+xml,%3Csvg xmlns='http://www.w3.org/2000/svg' width='24' height='24' viewBox='0 0 24 24' fill='none' stroke='%2303234b' stroke-width='2' stroke-linecap='round' stroke-linejoin='round'%3E%3Ccircle cx='9' cy='21' r='1'%3E%3C/circle%3E%3Ccircle cx='20' cy='21' r='1'%3E%3C/circle%3E%3Cpath d='M1 1h4l2.68 13.39a2 2 0 0 0 2 1.61h9.72a2 2 0 0 0 2-1.61L23 6H6'%3E%3C/path%3E%3C/svg%3E"); } +span.icon-upload { + background-image: url("data:image/svg+xml,%3Csvg xmlns='http://www.w3.org/2000/svg' width='24' height='24' viewBox='0 0 24 24' fill='none' stroke='%2303234b' stroke-width='2' stroke-linecap='round' stroke-linejoin='round'%3E%3Cpath d='M21 15v4a2 2 0 0 1-2 2H5a2 2 0 0 1-2-2v-4'%3E%3C/path%3E%3Cpolyline points='17 8 12 3 7 8'%3E%3C/polyline%3E%3Cline x1='12' y1='3' x2='12' y2='15'%3E%3C/line%3E%3C/svg%3E"); } +span.icon-user { + background-image: url("data:image/svg+xml,%3Csvg xmlns='http://www.w3.org/2000/svg' width='24' height='24' viewBox='0 0 24 24' fill='none' stroke='%2303234b' stroke-width='2' stroke-linecap='round' stroke-linejoin='round'%3E%3Cpath d='M20 21v-2a4 4 0 0 0-4-4H8a4 4 0 0 0-4 4v2'%3E%3C/path%3E%3Ccircle cx='12' cy='7' r='4'%3E%3C/circle%3E%3C/svg%3E"); } + +/* + Definitions for utilities and helper classes. +*/ +/* Utility module CSS variable definitions */ +:root { + --generic-border-color: rgba(0, 0, 0, 0.3); + --generic-box-shadow: 0 0.2857142857rem 0.2857142857rem 0 rgba(0, 0, 0, 0.125), 0 0.1428571429rem 0.1428571429rem -0.1428571429rem rgba(0, 0, 0, 0.125); } + +.hidden { + display: none !important; } + +.visually-hidden { + position: absolute !important; + width: 1px !important; + height: 1px !important; + margin: -1px !important; + border: 0 !important; + padding: 0 !important; + clip: rect(0 0 0 0) !important; + -webkit-clip-path: inset(100%) !important; + clip-path: inset(100%) !important; + overflow: hidden !important; } + +.bordered { + border: 0.0714285714rem solid var(--generic-border-color) !important; } + +.rounded { + border-radius: var(--universal-border-radius) !important; } + +.circular { + border-radius: 50% !important; } + +.shadowed { + box-shadow: var(--generic-box-shadow) !important; } + +.responsive-margin { + margin: calc(var(--universal-margin) / 4) !important; } + @media screen and (min-width: 500px) { + .responsive-margin { + margin: calc(var(--universal-margin) / 2) !important; } } + @media screen and (min-width: 1280px) { + .responsive-margin { + margin: var(--universal-margin) !important; } } + +.responsive-padding { + padding: calc(var(--universal-padding) / 4) !important; } + @media screen and (min-width: 500px) { + .responsive-padding { + padding: calc(var(--universal-padding) / 2) !important; } } + @media screen and (min-width: 1280px) { + .responsive-padding { + padding: var(--universal-padding) !important; } } + +@media screen and (max-width: 499px) { + .hidden-sm { + display: none !important; } } +@media screen and (min-width: 500px) and (max-width: 1279px) { + .hidden-md { + display: none !important; } } +@media screen and (min-width: 1280px) { + .hidden-lg { + display: none !important; } } +@media screen and (max-width: 499px) { + .visually-hidden-sm { + position: absolute !important; + width: 1px !important; + height: 1px !important; + margin: -1px !important; + border: 0 !important; + padding: 0 !important; + clip: rect(0 0 0 0) !important; + -webkit-clip-path: inset(100%) !important; + clip-path: inset(100%) !important; + overflow: hidden !important; } } +@media screen and (min-width: 500px) and (max-width: 1279px) { + .visually-hidden-md { + position: absolute !important; + width: 1px !important; + height: 1px !important; + margin: -1px !important; + border: 0 !important; + padding: 0 !important; + clip: rect(0 0 0 0) !important; + -webkit-clip-path: inset(100%) !important; + clip-path: inset(100%) !important; + overflow: hidden !important; } } +@media screen and (min-width: 1280px) { + .visually-hidden-lg { + position: absolute !important; + width: 1px !important; + height: 1px !important; + margin: -1px !important; + border: 0 !important; + padding: 0 !important; + clip: rect(0 0 0 0) !important; + -webkit-clip-path: inset(100%) !important; + clip-path: inset(100%) !important; + overflow: hidden !important; } } + +/*# sourceMappingURL=mini-custom.css.map */ + +img[alt="ST logo"] { display: block; margin: auto; width: 75%; max-width: 250px; min-width: 71px; } +img[alt="Cube logo"] { float: right; width: 30%; max-width: 10rem; min-width: 8rem; padding-right: 1rem;} + +.figure { + display: block; + margin-left: auto; + margin-right: auto; + text-align: center; +} diff --git a/hw/bsp/stm32n6/boards/stm32n657nucleo/tcpp0203/_htmresc/st_logo_2020.png b/hw/bsp/stm32n6/boards/stm32n657nucleo/tcpp0203/_htmresc/st_logo_2020.png new file mode 100644 index 000000000..d6cebb5ac Binary files /dev/null and b/hw/bsp/stm32n6/boards/stm32n657nucleo/tcpp0203/_htmresc/st_logo_2020.png differ diff --git a/hw/bsp/stm32n6/boards/stm32n657nucleo/tcpp0203/tcpp0203.c b/hw/bsp/stm32n6/boards/stm32n657nucleo/tcpp0203/tcpp0203.c new file mode 100644 index 000000000..952ff16c9 --- /dev/null +++ b/hw/bsp/stm32n6/boards/stm32n657nucleo/tcpp0203/tcpp0203.c @@ -0,0 +1,886 @@ +/** + ****************************************************************************** + * @file tcpp0203.c + * @author MCD Application Team + * @brief This file provides the TCPP02/03 Type-C port protection driver. + ****************************************************************************** + * @attention + * + * Copyright (c) 2021 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "tcpp0203.h" + +#if defined(_TRACE) +#include "usbpd_core.h" +#include "usbpd_trace.h" +#include "string.h" +#include "stdio.h" +#endif /* _TRACE */ + +/** @addtogroup BSP + * @{ + */ + +/** @addtogroup Components + * @{ + */ + +/** @addtogroup TCPP0203 + * @brief This file provides a set of functions needed to drive the + * TCPP02/03 Type-C port protection. + * @{ + */ + +/** @defgroup TCPP0203_Private_Constants Private Constants + * @{ + */ + +/* Compilation option in order to enable/disable a concistency check performed + after each I2C access into TCPP0203 registers : goal is to check that written value in Reg0 + is properly reflected into reg1 register content. + To enable register consistency check, please uncomment below definition. + To disable it, comment below line */ +/* #define TCPP0203_REGISTER_CONSISTENCY_CHECK */ + +/** @defgroup TCPP0203_Private_Types Private Types + * @{ + */ +/* TCPP02/03 Type-C port protection driver structure initialization */ +TCPP0203_Drv_t TCPP0203_Driver = +{ + TCPP0203_Init, + TCPP0203_DeInit, + TCPP0203_Reset, + TCPP0203_SetVConnSwitch, + TCPP0203_SetGateDriverProvider, + TCPP0203_SetGateDriverConsumer, + TCPP0203_SetPowerMode, + TCPP0203_SetVBusDischarge, + TCPP0203_SetVConnDischarge, + TCPP0203_GetVConnSwitchAck, + TCPP0203_GetGateDriverProviderAck, + TCPP0203_GetGateDriverConsumerAck, + TCPP0203_GetPowerModeAck, + TCPP0203_GetVBusDischargeAck, + TCPP0203_GetVConnDischargeAck, + TCPP0203_GetOCPVConnFlag, + TCPP0203_GetOCPVBusFlag, + TCPP0203_GetOVPVBusFlag, + TCPP0203_GetOVPCCFlag, + TCPP0203_GetOTPFlag, + TCPP0203_GetVBusOkFlag, + TCPP0203_ReadTCPPType, + TCPP0203_ReadVCONNPower, + TCPP0203_WriteCtrlRegister, + TCPP0203_ReadAckRegister, + TCPP0203_ReadFlagRegister, +}; + +/** + * @} + */ + +/** @defgroup TCPP0203_Private_Variables Private Variables + * @{ + */ +static uint8_t TCPP0203_DeviceType = TCPP0203_DEVICE_TYPE_03; + +#if defined(TCPP0203_REGISTER_CONSISTENCY_CHECK) +static uint8_t Reg0_Expected_Value = 0x00; +static uint8_t Reg1_LastRead_Value = 0x00; +#endif /* TCPP0203_REGISTER_CONSISTENCY_CHECK */ + +/** + * @} + */ + +/* Private function prototypes -----------------------------------------------*/ + +/** @defgroup TCPP0203_Private_Function_Prototypes TCPP0203 Private Function Prototypes + * @{ + */ +static int32_t TCPP0203_ReadRegWrap(const void *handle, uint8_t Reg, uint8_t *Data, uint8_t Length); +static int32_t TCPP0203_WriteRegWrap(const void *handle, uint8_t Reg, uint8_t *Data, uint8_t Length); + +static int32_t TCPP0203_ModifyReg0(TCPP0203_Object_t *pObj, uint8_t Value, uint8_t Mask); + +#if defined(TCPP0203_REGISTER_CONSISTENCY_CHECK) +static int32_t TCPP0203_CheckReg0Reg1(TCPP0203_Object_t *pObj, uint8_t Reg0ExpectedValue); +#endif /* TCPP0203_REGISTER_CONSISTENCY_CHECK */ + +/** + * @} + */ + +/** @defgroup TCPP0203_Exported_Functions TCPP0203 Exported Functions + * @{ + */ + +/** + * @brief Register Bus Io to component + * @param Component object pointer + * @retval Status of execution + */ +int32_t TCPP0203_RegisterBusIO(TCPP0203_Object_t *pObj, TCPP0203_IO_t *pIO) +{ + int32_t ret; + + if (pObj == NULL) + { + ret = TCPP0203_ERROR; + } + else + { + pObj->IO.Init = pIO->Init; + pObj->IO.DeInit = pIO->DeInit; + pObj->IO.Address = pIO->Address; + pObj->IO.WriteReg = pIO->WriteReg; + pObj->IO.ReadReg = pIO->ReadReg; + pObj->IO.GetTick = pIO->GetTick; + + pObj->Ctx.ReadReg = TCPP0203_ReadRegWrap; + pObj->Ctx.WriteReg = TCPP0203_WriteRegWrap; + pObj->Ctx.handle = pObj; + + if (pObj->IO.Init != NULL) + { + ret = pObj->IO.Init(); + } + else + { + ret = TCPP0203_ERROR; + } + } + + return ret; +} + +/** + * @brief Initializes the TCPP0203 interface + * @param pObj Pointer to component object + * @retval Component status (TCPP0203_OK / TCPP0203_ERROR) + */ +int32_t TCPP0203_Init(TCPP0203_Object_t *pObj) +{ + int32_t ret = 0; + uint8_t tmp; + + if (pObj->IsInitialized == 0U) + { + /* Read TCPP Device type */ + ret += tcpp0203_read_reg(&pObj->Ctx, TCPP0203_READ_REG2, &tmp, 1); + + if (ret == TCPP0203_OK) + { + TCPP0203_DeviceType = (tmp & TCPP0203_DEVICE_TYPE_MSK); + } + else + { + TCPP0203_DeviceType = TCPP0203_DEVICE_TYPE_02; + } + pObj->IsInitialized = 1U; + } + + if (ret != TCPP0203_OK) + { + ret = TCPP0203_ERROR; + } + + return ret; +} + +/** + * @brief Deinitializes the TCPP0203 interface + * @param pObj Pointer to component object + * @retval Component status (TCPP0203_OK / TCPP0203_ERROR) + */ +int32_t TCPP0203_DeInit(TCPP0203_Object_t *pObj) +{ + if (pObj->IsInitialized == 1U) + { + /* De-Initialize IO BUS layer */ + pObj->IO.DeInit(); + + pObj->IsInitialized = 0U; + } + + return TCPP0203_OK; +} + +/** + * @brief Resets TCPP0203 register (Reg0) + * @param pObj Pointer to component object + * @retval Component status (TCPP0203_OK / TCPP0203_ERROR) + */ +int32_t TCPP0203_Reset(TCPP0203_Object_t *pObj) +{ + int32_t ret = TCPP0203_OK; + uint8_t tmp = TCPP0203_REG0_RST_VALUE; + + /* Write reset values in Reg0 register */ + if (tcpp0203_write_reg(&pObj->Ctx, TCPP0203_PROG_CTRL, &tmp, 1) != TCPP0203_OK) + { + ret = TCPP0203_ERROR; + } + +#if defined(TCPP0203_REGISTER_CONSISTENCY_CHECK) + Reg0_Expected_Value = TCPP0203_REG0_RST_VALUE; + Reg1_LastRead_Value = TCPP0203_REG0_RST_VALUE; +#endif /* TCPP0203_REGISTER_CONSISTENCY_CHECK */ + + return ret; +} + +/** + * @brief Configure TCPP0203 VConn Switch + * @param pObj Pointer to component object + * @param VConnSwitch VConn Switch requested setting + * This parameter can be one of the following values: + * @arg TCPP0203_VCONN_SWITCH_OPEN VConn switch open + * @arg TCPP0203_VCONN_SWITCH_CC1 VConn closed on CC1 + * @arg TCPP0203_VCONN_SWITCH_CC2 VConn closed on CC2 + * @retval Component status + */ +int32_t TCPP0203_SetVConnSwitch(TCPP0203_Object_t *pObj, uint8_t VConnSwitch) +{ + int32_t ret = TCPP0203_OK; + + if ((VConnSwitch != TCPP0203_VCONN_SWITCH_OPEN) + && (VConnSwitch != TCPP0203_VCONN_SWITCH_CC1) + && (VConnSwitch != TCPP0203_VCONN_SWITCH_CC2)) + { + ret = TCPP0203_ERROR; + } + else + { + /* Update VConn switch setting in Writing register Reg0 */ + ret += TCPP0203_ModifyReg0(pObj, VConnSwitch, TCPP0203_VCONN_SWITCH_MSK); + } + + return ret; +} + +/** + * @brief Configure TCPP0203 Gate Driver for Provider path + * @param pObj Pointer to component object + * @param GateDriverProvider GDP switch load requested setting + * This parameter can be one of the following values: + * @arg TCPP0203_GD_PROVIDER_SWITCH_OPEN GDP Switch Load Open + * @arg TCPP0203_GD_PROVIDER_SWITCH_CLOSED GDP Switch Load closed + * @retval Component status + */ +int32_t TCPP0203_SetGateDriverProvider(TCPP0203_Object_t *pObj, uint8_t GateDriverProvider) +{ + int32_t ret = TCPP0203_OK; + + if ((GateDriverProvider != TCPP0203_GD_PROVIDER_SWITCH_OPEN) + && (GateDriverProvider != TCPP0203_GD_PROVIDER_SWITCH_CLOSED)) + { + ret = TCPP0203_ERROR; + } + else + { + /* Update GDP Switch Load setting in Writing register Reg0 */ + if (GateDriverProvider == TCPP0203_GD_PROVIDER_SWITCH_CLOSED) + { + /* If Gate Driver Provider is to be closed, Gate Driver Consumer should be open */ + ret += TCPP0203_ModifyReg0(pObj, (GateDriverProvider | TCPP0203_GD_CONSUMER_SWITCH_OPEN), + (TCPP0203_GD_PROVIDER_SWITCH_MSK | TCPP0203_GD_CONSUMER_SWITCH_MSK)); + } + else + { + ret += TCPP0203_ModifyReg0(pObj, GateDriverProvider, TCPP0203_GD_PROVIDER_SWITCH_MSK); + } + } + + return ret; +} + +/** + * @brief Configure TCPP0203 Gate Driver for Consumer path + * @param pObj Pointer to component object + * @param GateDriverConsumer GDC switch load requested setting + * This parameter can be one of the following values: + * @arg TCPP0203_GD_CONSUMER_SWITCH_OPEN GDC Switch Load Open + * @arg TCPP0203_GD_CONSUMER_SWITCH_CLOSED GDC Switch Load closed + * @retval Component status + */ +int32_t TCPP0203_SetGateDriverConsumer(TCPP0203_Object_t *pObj, uint8_t GateDriverConsumer) +{ + int32_t ret = TCPP0203_OK; + + /* Check if TCPP type is TCPP03. Otherwise, return error */ + if (TCPP0203_DeviceType != TCPP0203_DEVICE_TYPE_03) + { + return (TCPP0203_ERROR); + } + + if ((GateDriverConsumer != TCPP0203_GD_CONSUMER_SWITCH_OPEN) + && (GateDriverConsumer != TCPP0203_GD_CONSUMER_SWITCH_CLOSED)) + { + ret = TCPP0203_ERROR; + } + else + { + /* Update GDC Switch Load setting in Writing register Reg0 */ + if (GateDriverConsumer == TCPP0203_GD_CONSUMER_SWITCH_CLOSED) + { + /* If Gate Driver Consumer is to be closed, Gate Driver Provider should be open */ + ret += TCPP0203_ModifyReg0(pObj, (GateDriverConsumer | TCPP0203_GD_PROVIDER_SWITCH_OPEN), + (TCPP0203_GD_PROVIDER_SWITCH_MSK | TCPP0203_GD_CONSUMER_SWITCH_MSK)); + } + else + { + ret += TCPP0203_ModifyReg0(pObj, GateDriverConsumer, TCPP0203_GD_CONSUMER_SWITCH_MSK); + } + } + + return ret; +} + +/** + * @brief Configure TCPP0203 Power Mode + * @param pObj Pointer to component object + * @param PowerMode Power mode requested setting + * This parameter can be one of the following values: + * @arg TCPP0203_POWER_MODE_HIBERNATE Hibernate + * @arg TCPP0203_POWER_MODE_LOWPOWER Low Power + * @arg TCPP0203_POWER_MODE_NORMAL Normal + * @retval Component status + */ +int32_t TCPP0203_SetPowerMode(TCPP0203_Object_t *pObj, uint8_t PowerMode) +{ + int32_t ret = TCPP0203_OK; + + if ((PowerMode != TCPP0203_POWER_MODE_HIBERNATE) + && (PowerMode != TCPP0203_POWER_MODE_LOWPOWER) + && (PowerMode != TCPP0203_POWER_MODE_NORMAL)) + { + ret = TCPP0203_ERROR; + } + else + { + /* Update Power Mode setting in Writing register Reg0 */ + ret += TCPP0203_ModifyReg0(pObj, PowerMode, TCPP0203_POWER_MODE_MSK); + } + + return ret; +} + +/** + * @brief Configure TCPP0203 Gate Driver for Provider path + * @param pObj Pointer to component object + * @param VBusDischarge VBUS Discharge requested setting + * This parameter can be one of the following values: + * @arg TCPP0203_VBUS_DISCHARGE_OFF VBUS Discharge Off + * @arg TCPP0203_VBUS_DISCHARGE_ON VBUS Discharge On + * @retval Component status + */ +int32_t TCPP0203_SetVBusDischarge(TCPP0203_Object_t *pObj, uint8_t VBusDischarge) +{ + int32_t ret = TCPP0203_OK; + + if ((VBusDischarge != TCPP0203_VBUS_DISCHARGE_OFF) + && (VBusDischarge != TCPP0203_VBUS_DISCHARGE_ON)) + { + ret = TCPP0203_ERROR; + } + else + { + /* Update VBUS Discharge setting in Writing register Reg0 */ + ret += TCPP0203_ModifyReg0(pObj, VBusDischarge, TCPP0203_VBUS_DISCHARGE_MSK); + } + + return ret; +} + +/** + * @brief Configure TCPP0203 Gate Driver for Provider path + * @param pObj Pointer to component object + * @param VConnDischarge GDP switch load requested setting + * This parameter can be one of the following values: + * @arg TCPP0203_VCONN_DISCHARGE_OFF VConn Discharge Off + * @arg TCPP0203_VCONN_DISCHARGE_ON VConn Discharge On + * @retval Component status + */ +int32_t TCPP0203_SetVConnDischarge(TCPP0203_Object_t *pObj, uint8_t VConnDischarge) +{ + int32_t ret = TCPP0203_OK; + + if ((VConnDischarge != TCPP0203_VCONN_DISCHARGE_OFF) + && (VConnDischarge != TCPP0203_VCONN_DISCHARGE_ON)) + { + ret = TCPP0203_ERROR; + } + else + { + /* Update VConn Discharge setting in Writing register Reg0 */ + ret += TCPP0203_ModifyReg0(pObj, VConnDischarge, TCPP0203_VCONN_DISCHARGE_MSK); + } + + return ret; +} + +/** + * @brief Get VConn switch Ack value + * @param pObj Pointer to component object + * @param pVConnSwitchAck Pointer on VConn switch Ack value + * This output parameter can be one of the following values: + * @arg TCPP0203_VCONN_SWITCH_OPEN VConn switch open Ack + * @arg TCPP0203_VCONN_SWITCH_CC1 VConn closed on CC1 Ack + * @arg TCPP0203_VCONN_SWITCH_CC2 VConn closed on CC2 Ack + * @retval Component status + */ +int32_t TCPP0203_GetVConnSwitchAck(TCPP0203_Object_t *pObj, uint8_t *pVConnSwitchAck) +{ + int32_t ret; + uint8_t tmp; + + ret = tcpp0203_read_reg(&pObj->Ctx, TCPP0203_ACK_REG, &tmp, 1); + *pVConnSwitchAck = (tmp & TCPP0203_VCONN_SWITCH_ACK_MSK); + + return ret; +} + +/** + * @brief Get Gate Driver Provider Ack value + * @param pObj Pointer to component object + * @param pGateDriverProviderAck Pointer on Gate Driver Provider Ack value + * This output parameter can be one of the following values: + * @arg TCPP0203_GD_PROVIDER_SWITCH_ACK_OPEN Gate Driver Provider Open Ack + * @arg TCPP0203_GD_PROVIDER_SWITCH_ACK_CLOSED Gate Driver Provider Closed Ack + * @retval Component status + */ +int32_t TCPP0203_GetGateDriverProviderAck(TCPP0203_Object_t *pObj, uint8_t *pGateDriverProviderAck) +{ + int32_t ret; + uint8_t tmp; + + ret = tcpp0203_read_reg(&pObj->Ctx, TCPP0203_ACK_REG, &tmp, 1); + *pGateDriverProviderAck = (tmp & TCPP0203_GD_PROVIDER_SWITCH_ACK_MSK); + + return ret; +} + +/** + * @brief Get Gate Driver Consumer Ack value + * @param pObj Pointer to component object + * @param pGateDriverConsumerAck Pointer on Gate Driver Consumer Ack value + * This output parameter can be one of the following values: + * @arg TCPP0203_GD_CONSUMER_SWITCH_ACK_OPEN Gate Driver Consumer Open Ack + * @arg TCPP0203_GD_CONSUMER_SWITCH_ACK_CLOSED Gate Driver Consumer Closed Ack + * @retval Component status + */ +int32_t TCPP0203_GetGateDriverConsumerAck(TCPP0203_Object_t *pObj, uint8_t *pGateDriverConsumerAck) +{ + int32_t ret; + uint8_t tmp; + + /* Check if TCPP type is TCPP03. Otherwise, return error */ + if (TCPP0203_DeviceType != TCPP0203_DEVICE_TYPE_03) + { + return (TCPP0203_ERROR); + } + + ret = tcpp0203_read_reg(&pObj->Ctx, TCPP0203_ACK_REG, &tmp, 1); + *pGateDriverConsumerAck = (tmp & TCPP0203_GD_CONSUMER_SWITCH_ACK_MSK); + + return ret; +} + +/** + * @brief Get Power Mode Ack value + * @param pObj Pointer to component object + * @param pPowerModeAck Pointer on Power Mode Ack value + * This output parameter can be one of the following values: + * @arg TCPP0203_POWER_MODE_ACK_HIBERNATE Power Mode Hibernate Ack + * @arg TCPP0203_POWER_MODE_ACK_LOWPOWER Power Mode Low Power Ack + * @arg TCPP0203_POWER_MODE_ACK_NORMAL Power Mode Normal Ack + * @retval Component status + */ +int32_t TCPP0203_GetPowerModeAck(TCPP0203_Object_t *pObj, uint8_t *pPowerModeAck) +{ + int32_t ret; + uint8_t tmp; + + ret = tcpp0203_read_reg(&pObj->Ctx, TCPP0203_ACK_REG, &tmp, 1); + *pPowerModeAck = (tmp & TCPP0203_POWER_MODE_ACK_MSK); + + return ret; +} + +/** + * @brief Get VBUS Discharge Ack value + * @param pObj Pointer to component object + * @param pVBusDischargeAck Pointer on VBUS Discharge Ack value + * This output parameter can be one of the following values: + * @arg TCPP0203_VBUS_DISCHARGE_ACK_OFF VBUS Discharge Off Ack + * @arg TCPP0203_VBUS_DISCHARGE_ACK_ON VBUS Discharge On Ack + * @retval Component status + */ +int32_t TCPP0203_GetVBusDischargeAck(TCPP0203_Object_t *pObj, uint8_t *pVBusDischargeAck) +{ + int32_t ret; + uint8_t tmp; + + ret = tcpp0203_read_reg(&pObj->Ctx, TCPP0203_ACK_REG, &tmp, 1); + *pVBusDischargeAck = (tmp & TCPP0203_VBUS_DISCHARGE_ACK_MSK); + + return ret; +} + +/** + * @brief Get VConn Discharge Ack value + * @param pObj Pointer to component object + * @param pVConnDischargeAck Pointer on VConn Discharge Ack value + * This output parameter can be one of the following values: + * @arg TCPP0203_VCONN_DISCHARGE_ACK_OFF VConn Discharge Off Ack + * @arg TCPP0203_VCONN_DISCHARGE_ACK_ON VConn Discharge On Ack + * @retval Component status + */ +int32_t TCPP0203_GetVConnDischargeAck(TCPP0203_Object_t *pObj, uint8_t *pVConnDischargeAck) +{ + int32_t ret; + uint8_t tmp; + + ret = tcpp0203_read_reg(&pObj->Ctx, TCPP0203_ACK_REG, &tmp, 1); + *pVConnDischargeAck = (tmp & TCPP0203_VCONN_DISCHARGE_ACK_MSK); + + return ret; +} + +/** + * @brief Get OCP VConn Flag value + * @param pObj Pointer to component object + * @param pOCPVConnFlag Pointer on OCP VConn Flag value + * This output parameter can be one of the following values: + * @arg TCPP0203_FLAG_OCP_VCONN_RESET OCP VConn flag not set + * @arg TCPP0203_FLAG_OCP_VCONN_SET OCP VConn flag set + * @retval Component status + */ +int32_t TCPP0203_GetOCPVConnFlag(TCPP0203_Object_t *pObj, uint8_t *pOCPVConnFlag) +{ + int32_t ret; + uint8_t tmp; + + ret = tcpp0203_read_reg(&pObj->Ctx, TCPP0203_FLAG_REG, &tmp, 1); + *pOCPVConnFlag = (tmp & TCPP0203_FLAG_OCP_VCONN_MSK); + + return ret; +} + +/** + * @brief Get OCP VBUS Flag value + * @param pObj Pointer to component object + * @param pGetOCPVBusFlag Pointer on OCP VBUS Flag value + * This output parameter can be one of the following values: + * @arg TCPP0203_FLAG_OCP_VBUS_RESET OCP VBUS flag not set + * @arg TCPP0203_FLAG_OCP_VBUS_SET OCP VBUS flag set + * @retval Component status + */ +int32_t TCPP0203_GetOCPVBusFlag(TCPP0203_Object_t *pObj, uint8_t *pGetOCPVBusFlag) +{ + int32_t ret; + uint8_t tmp; + + ret = tcpp0203_read_reg(&pObj->Ctx, TCPP0203_FLAG_REG, &tmp, 1); + *pGetOCPVBusFlag = (tmp & TCPP0203_FLAG_OCP_VBUS_MSK); + + return ret; +} + +/** + * @brief Get OVP VBUS Flag value + * @param pObj Pointer to component object + * @param pOVPVBusFlag Pointer on OVP VBUS Flag value + * This output parameter can be one of the following values: + * @arg TCPP0203_FLAG_OVP_VBUS_RESET OVP VBUS flag not set + * @arg TCPP0203_FLAG_OVP_VBUS_SET OVP VBUS flag set + * @retval Component status + */ +int32_t TCPP0203_GetOVPVBusFlag(TCPP0203_Object_t *pObj, uint8_t *pOVPVBusFlag) +{ + int32_t ret; + uint8_t tmp; + + ret = tcpp0203_read_reg(&pObj->Ctx, TCPP0203_FLAG_REG, &tmp, 1); + *pOVPVBusFlag = (tmp & TCPP0203_FLAG_OVP_VBUS_MSK); + + return ret; +} + +/** + * @brief Get OVP CC Flag value + * @param pObj Pointer to component object + * @param pOVPCCFlag Pointer on OVP CC Flag value + * This output parameter can be one of the following values: + * @arg TCPP0203_FLAG_OVP_CC_RESET OVP CC flag not set + * @arg TCPP0203_FLAG_OVP_CC_SET OVP CC flag set + * @retval Component status + */ +int32_t TCPP0203_GetOVPCCFlag(TCPP0203_Object_t *pObj, uint8_t *pOVPCCFlag) +{ + int32_t ret; + uint8_t tmp; + + ret = tcpp0203_read_reg(&pObj->Ctx, TCPP0203_FLAG_REG, &tmp, 1); + *pOVPCCFlag = (tmp & TCPP0203_FLAG_OVP_CC_MSK); + + return ret; +} + +/** + * @brief Get Over Temperature Flag value + * @param pObj Pointer to component object + * @param pOTPFlag Pointer on Over Temperature Flag value + * This output parameter can be one of the following values: + * @arg TCPP0203_FLAG_OTP_RESET Over Temperature flag not set + * @arg TCPP0203_FLAG_OTP_SET Over Temperature flag set + * @retval Component status + */ +int32_t TCPP0203_GetOTPFlag(TCPP0203_Object_t *pObj, uint8_t *pOTPFlag) +{ + int32_t ret; + uint8_t tmp; + + ret = tcpp0203_read_reg(&pObj->Ctx, TCPP0203_FLAG_REG, &tmp, 1); + *pOTPFlag = (tmp & TCPP0203_FLAG_OTP_MSK); + + return ret; +} + +/** + * @brief Get VBUS OK Flag value + * @param pObj Pointer to component object + * @param pVBusOkFlag Pointer on VBUS OK Flag value + * This output parameter can be one of the following values: + * @arg TCPP0203_FLAG_VBUS_OK_RESET VBUS OK flag not set + * @arg TCPP0203_FLAG_VBUS_OK_SET VBUS OK flag set + * @retval Component status + */ +int32_t TCPP0203_GetVBusOkFlag(TCPP0203_Object_t *pObj, uint8_t *pVBusOkFlag) +{ + int32_t ret; + uint8_t tmp; + + ret = tcpp0203_read_reg(&pObj->Ctx, TCPP0203_FLAG_REG, &tmp, 1); + *pVBusOkFlag = (tmp & TCPP0203_FLAG_VBUS_OK_MSK); + + return ret; +} + +/** + * @brief Get TCPP0203 Device Type value + * @param pObj Pointer to component object + * @param pTCPPType Pointer on TCPP0203 Device Type value + * This output parameter can be one of the following values: + * @arg TCPP0203_DEVICE_TYPE_02 TCPP02 Type + * @arg TCPP0203_DEVICE_TYPE_03 TCPP03 Type + * @retval Component status + */ +int32_t TCPP0203_ReadTCPPType(TCPP0203_Object_t *pObj, uint8_t *pTCPPType) +{ + int32_t ret; + uint8_t tmp; + + ret = tcpp0203_read_reg(&pObj->Ctx, TCPP0203_FLAG_REG, &tmp, 1); + *pTCPPType = (tmp & TCPP0203_DEVICE_TYPE_MSK); + + return ret; +} + +/** + * @brief Get VConn Power value + * @param pObj Pointer to component object + * @param pVCONNPower Pointer on VConn Power value + * This output parameter can be one of the following values: + * @arg TCPP0203_FLAG_VCONN_PWR_1W OCP VConn flag not set + * @arg TCPP0203_FLAG_VCONN_PWR_0_1W OCP VConn flag set + * @retval Component status + */ +int32_t TCPP0203_ReadVCONNPower(TCPP0203_Object_t *pObj, uint8_t *pVCONNPower) +{ + int32_t ret; + uint8_t tmp; + + ret = tcpp0203_read_reg(&pObj->Ctx, TCPP0203_FLAG_REG, &tmp, 1); + *pVCONNPower = (tmp & TCPP0203_FLAG_VCONN_PWR_MSK); + + return ret; +} + +/** + * @brief Set complete Ctrl register value (Reg 0) + * @param pObj Pointer to component object + * @param pCtrlRegister Pointer on Ctrl register value + * @retval Component status + */ +int32_t TCPP0203_WriteCtrlRegister(TCPP0203_Object_t *pObj, uint8_t *pCtrlRegister) +{ + int32_t ret; + + /* Update value in writing register (reg0) */ + ret = tcpp0203_write_reg(&pObj->Ctx, TCPP0203_PROG_CTRL, pCtrlRegister, 1); + +#if defined(TCPP0203_REGISTER_CONSISTENCY_CHECK) + Reg0_Expected_Value = *pCtrlRegister; +#endif /* TCPP0203_REGISTER_CONSISTENCY_CHECK */ + + return ret; +} + +/** + * @brief Get complete Ack register value + * @param pObj Pointer to component object + * @param pAckRegister Pointer on Ack register value + * @retval Component status + */ +int32_t TCPP0203_ReadAckRegister(TCPP0203_Object_t *pObj, uint8_t *pAckRegister) +{ + int32_t ret; + + ret = tcpp0203_read_reg(&pObj->Ctx, TCPP0203_ACK_REG, pAckRegister, 1); + + return ret; +} + +/** + * @brief Get complete Flag register value + * @param pObj Pointer to component object + * @param pFlagRegister Pointer on Flag register value + * @retval Component status + */ +int32_t TCPP0203_ReadFlagRegister(TCPP0203_Object_t *pObj, uint8_t *pFlagRegister) +{ + int32_t ret; + + ret = tcpp0203_read_reg(&pObj->Ctx, TCPP0203_FLAG_REG, pFlagRegister, 1); + + return ret; +} + +/******************** Static functions ****************************************/ +/** + * @brief Wrap TCPP0203 read function to Bus IO function + * @param handle Component object handle + * @param Reg Target register address to read + * @param pData Buffer where Target register value should be stored + * @param Length buffer size to be read + * @retval error status + */ +static int32_t TCPP0203_ReadRegWrap(const void *handle, uint8_t Reg, uint8_t *pData, uint8_t Length) +{ + const TCPP0203_Object_t *pObj = (const TCPP0203_Object_t *)handle; + + return pObj->IO.ReadReg(pObj->IO.Address, Reg, pData, Length); +} + +/** + * @brief Wrap TCPP0203 write function to Bus IO function + * @param handle Component object handle + * @param Reg Target register address to write + * @param pData Target register value to be written + * @param Length Buffer size to be written + * @retval error status + */ +static int32_t TCPP0203_WriteRegWrap(const void *handle, uint8_t Reg, uint8_t *pData, uint8_t Length) +{ + const TCPP0203_Object_t *pObj = (const TCPP0203_Object_t *)handle; + +#if defined(TCPP0203_REGISTER_CONSISTENCY_CHECK) + Reg0_Expected_Value = *pData; +#endif /* TCPP0203_REGISTER_CONSISTENCY_CHECK */ + + return pObj->IO.WriteReg(pObj->IO.Address, Reg, pData, Length); +} + +/** + * @brief TCPP0203 register update function to Bus IO function + * @param handle Component object handle + * @param Reg Target register address to write + * @param pData Target register value to be written + * @param Length Buffer size to be written + * @retval error status + */ +static int32_t TCPP0203_ModifyReg0(TCPP0203_Object_t *pObj, uint8_t Value, uint8_t Mask) +{ + int32_t ret; + uint8_t tmp; + + /* Read current content of ACK register (reflects content of bits set to 1 in Writing register Reg0) */ + ret = tcpp0203_read_reg(&pObj->Ctx, TCPP0203_ACK_REG, &tmp, 1); + + /* Update only the area dedicated to Mask */ + tmp &= ~(Mask); + tmp |= (Value & Mask); + +#if defined(TCPP0203_REGISTER_CONSISTENCY_CHECK) + Reg0_Expected_Value = tmp; +#endif /* TCPP0203_REGISTER_CONSISTENCY_CHECK */ + + /* Update value in writing register (reg0) */ + ret += tcpp0203_write_reg(&pObj->Ctx, TCPP0203_PROG_CTRL, &tmp, 1); + +#if defined(TCPP0203_REGISTER_CONSISTENCY_CHECK) + ret += TCPP0203_CheckReg0Reg1(pObj, Reg0_Expected_Value); +#endif /* TCPP0203_REGISTER_CONSISTENCY_CHECK */ + + return ret; +} + +#if defined(TCPP0203_REGISTER_CONSISTENCY_CHECK) +/** + * @brief TCPP0203 register control function between Reg0 and Reg1 value + * @param handle Component object handle + * @param Reg0ExpectedValue Value expected in Reg0 (built after all calls to write functions) + * @retval error status + */ +static int32_t TCPP0203_CheckReg0Reg1(TCPP0203_Object_t *pObj, uint8_t Reg0ExpectedValue) +{ + int32_t ret; + + /* Read current content of ACK register (expected to reflect content of bits set to 1 in Writing register Reg0) */ + ret = tcpp0203_read_reg(&pObj->Ctx, TCPP0203_ACK_REG, &Reg1_LastRead_Value, 1); + +#ifdef _TRACE + char str[12]; + sprintf(str, "Exp0_0x%02x", Reg0ExpectedValue); + USBPD_TRACE_Add(USBPD_TRACE_DEBUG, 0U, 0U, (uint8_t *)str, sizeof(str) - 1U); + sprintf(str, "Reg1_0x%02x", Reg1_LastRead_Value); + USBPD_TRACE_Add(USBPD_TRACE_DEBUG, 0U, 0U, (uint8_t *)str, sizeof(str) - 1U); +#endif /* _TRACE */ + + /* Control if Reg1 value is same as Reg0 expected one */ + if (Reg1_LastRead_Value != Reg0ExpectedValue) + { + while (1); + } + + return ret; +} +#endif /* TCPP0203_REGISTER_CONSISTENCY_CHECK */ + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ diff --git a/hw/bsp/stm32n6/boards/stm32n657nucleo/tcpp0203/tcpp0203.h b/hw/bsp/stm32n6/boards/stm32n657nucleo/tcpp0203/tcpp0203.h new file mode 100644 index 000000000..271b534fc --- /dev/null +++ b/hw/bsp/stm32n6/boards/stm32n657nucleo/tcpp0203/tcpp0203.h @@ -0,0 +1,353 @@ +/** + ****************************************************************************** + * @file tcpp0203.h + * @author MCD Application Team + * @brief This file contains all the functions prototypes for the + * tcpp0203.c driver. + ****************************************************************************** + * @attention + * + * Copyright (c) 2021 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef TCPP0203_H +#define TCPP0203_H + +/* Includes ------------------------------------------------------------------*/ +#include "tcpp0203_reg.h" +#include + +/** @addtogroup BSP + * @{ + */ + +/** @addtogroup Component + * @{ + */ + +/** @addtogroup TCPP0203 + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ + +/** @defgroup TCPP0203_Exported_Types TCPP0203 Exported Types + * @{ + */ +typedef int32_t (*TCPP0203_Init_Func)(void); +typedef int32_t (*TCPP0203_DeInit_Func)(void); +typedef int32_t (*TCPP0203_GetTick_Func)(void); +typedef int32_t (*TCPP0203_WriteReg_Func)(uint16_t, uint16_t, uint8_t *, uint16_t); +typedef int32_t (*TCPP0203_ReadReg_Func)(uint16_t, uint16_t, uint8_t *, uint16_t); + +typedef struct +{ + TCPP0203_Init_Func Init; + TCPP0203_DeInit_Func DeInit; + uint16_t Address; + TCPP0203_WriteReg_Func WriteReg; + TCPP0203_ReadReg_Func ReadReg; + TCPP0203_GetTick_Func GetTick; +} TCPP0203_IO_t; + + +typedef struct +{ + TCPP0203_IO_t IO; + TCPP0203_ctx_t Ctx; + uint8_t IsInitialized; +} TCPP0203_Object_t; + +typedef struct +{ + int32_t (*Init)(TCPP0203_Object_t *); + int32_t (*DeInit)(TCPP0203_Object_t *); + int32_t (*Reset)(TCPP0203_Object_t *); + int32_t (*SetVConnSwitch)(TCPP0203_Object_t *, uint8_t); + int32_t (*SetGateDriverProvider)(TCPP0203_Object_t *, uint8_t); + int32_t (*SetGateDriverConsumer)(TCPP0203_Object_t *, uint8_t); + int32_t (*SetPowerMode)(TCPP0203_Object_t *, uint8_t); + int32_t (*SetVBusDischarge)(TCPP0203_Object_t *, uint8_t); + int32_t (*SetVConnDischarge)(TCPP0203_Object_t *, uint8_t); + int32_t (*GetVConnSwitchAck)(TCPP0203_Object_t *, uint8_t *); + int32_t (*GetGateDriverProviderAck)(TCPP0203_Object_t *, uint8_t *); + int32_t (*GetGateDriverConsumerAck)(TCPP0203_Object_t *, uint8_t *); + int32_t (*GetPowerModeAck)(TCPP0203_Object_t *, uint8_t *); + int32_t (*GetVBusDischargeAck)(TCPP0203_Object_t *, uint8_t *); + int32_t (*GetVConnDischargeAck)(TCPP0203_Object_t *, uint8_t *); + int32_t (*GetOCPVConnFlag)(TCPP0203_Object_t *, uint8_t *); + int32_t (*GetOCPVBusFlag)(TCPP0203_Object_t *, uint8_t *); + int32_t (*GetOVPVBusFlag)(TCPP0203_Object_t *, uint8_t *); + int32_t (*GetOVPCCFlag)(TCPP0203_Object_t *, uint8_t *); + int32_t (*GetOTPFlag)(TCPP0203_Object_t *, uint8_t *); + int32_t (*GetVBusOkFlag)(TCPP0203_Object_t *, uint8_t *); + int32_t (*ReadTCPPType)(TCPP0203_Object_t *, uint8_t *); + int32_t (*ReadVCONNPower)(TCPP0203_Object_t *, uint8_t *); + int32_t (*WriteCtrlRegister)(TCPP0203_Object_t *, uint8_t *); + int32_t (*ReadAckRegister)(TCPP0203_Object_t *, uint8_t *); + int32_t (*ReadFlagRegister)(TCPP0203_Object_t *, uint8_t *); +} TCPP0203_Drv_t; + +/** + * @} + */ + +/** @defgroup TCPP0203_Exported_Constants TCPP0203 Exported Constants + * @{ + */ +/** + * @brief TCPP0203 Driver Response codes + */ +#define TCPP0203_OK (0) +#define TCPP0203_ERROR (-1) + +/** + * @brief TCPP0203 possible I2C Addresses + */ +#define TCPP0203_I2C_ADDRESS_X68 (0x68U) +#define TCPP0203_I2C_ADDRESS_X6A (0x6AU) + +/** + * @brief TCPP0203 Reg0 Reset Value + */ +#define TCPP0203_REG0_RST_VALUE TCPP0203_GD_CONSUMER_SWITCH_CLOSED + +/** + * @brief TCPP0203 VCONN Switch + */ +#define TCPP0203_VCONN_SWITCH_POS (0U) +#define TCPP0203_VCONN_SWITCH_MSK (0x03U << TCPP0203_VCONN_SWITCH_POS) +#define TCPP0203_VCONN_SWITCH_OPEN (0x00U) +#define TCPP0203_VCONN_SWITCH_CC1 (0x01U << TCPP0203_VCONN_SWITCH_POS) +#define TCPP0203_VCONN_SWITCH_CC2 (0x02U << TCPP0203_VCONN_SWITCH_POS) + +/** + * @brief TCPP0203 Gate Driver Provider values + */ +#define TCPP0203_GD_PROVIDER_SWITCH_POS (2U) +#define TCPP0203_GD_PROVIDER_SWITCH_MSK (0x01U << TCPP0203_GD_PROVIDER_SWITCH_POS) +#define TCPP0203_GD_PROVIDER_SWITCH_OPEN (0x00U) +#define TCPP0203_GD_PROVIDER_SWITCH_CLOSED (TCPP0203_GD_PROVIDER_SWITCH_MSK) + +/** + * @brief TCPP0203 Gate Driver Consumer values + */ +#define TCPP0203_GD_CONSUMER_SWITCH_POS (3U) +#define TCPP0203_GD_CONSUMER_SWITCH_MSK (0x01U << TCPP0203_GD_CONSUMER_SWITCH_POS) +#define TCPP0203_GD_CONSUMER_SWITCH_CLOSED (0x00U) +#define TCPP0203_GD_CONSUMER_SWITCH_OPEN (TCPP0203_GD_CONSUMER_SWITCH_MSK) + +/** + * @brief TCPP0203 Power Mode values + */ +#define TCPP0203_POWER_MODE_POS (4U) +#define TCPP0203_POWER_MODE_MSK (0x03U << TCPP0203_POWER_MODE_POS) +#define TCPP0203_POWER_MODE_HIBERNATE (0x00U) +#define TCPP0203_POWER_MODE_LOWPOWER (0x02U << TCPP0203_POWER_MODE_POS) +#define TCPP0203_POWER_MODE_NORMAL (0x01U << TCPP0203_POWER_MODE_POS) + +/** + * @brief TCPP0203 VBUS Discharge management + */ +#define TCPP0203_VBUS_DISCHARGE_POS (6U) +#define TCPP0203_VBUS_DISCHARGE_MSK (0x01U << TCPP0203_VBUS_DISCHARGE_POS) +#define TCPP0203_VBUS_DISCHARGE_OFF (0x00U) +#define TCPP0203_VBUS_DISCHARGE_ON (TCPP0203_VBUS_DISCHARGE_MSK) + +/** + * @brief TCPP0203 VConn Discharge management + */ +#define TCPP0203_VCONN_DISCHARGE_POS (7U) +#define TCPP0203_VCONN_DISCHARGE_MSK (0x01U << TCPP0203_VCONN_DISCHARGE_POS) +#define TCPP0203_VCONN_DISCHARGE_OFF (0x00U) +#define TCPP0203_VCONN_DISCHARGE_ON (TCPP0203_VCONN_DISCHARGE_MSK) + +/** + * @brief TCPP0203 VCONN Switch Acknowledge + */ +#define TCPP0203_VCONN_SWITCH_ACK_POS (0U) +#define TCPP0203_VCONN_SWITCH_ACK_MSK (0x03U << TCPP0203_VCONN_SWITCH_ACK_POS) +#define TCPP0203_VCONN_SWITCH_ACK_OPEN (0x00U) +#define TCPP0203_VCONN_SWITCH_ACK_CC1 (0x02U << TCPP0203_VCONN_SWITCH_ACK_POS) +#define TCPP0203_VCONN_SWITCH_ACK_CC2 (0x01U << TCPP0203_VCONN_SWITCH_ACK_POS) + +/** + * @brief TCPP0203 Gate Driver Provider Acknowledge + */ +#define TCPP0203_GD_PROVIDER_SWITCH_ACK_POS (2U) +#define TCPP0203_GD_PROVIDER_SWITCH_ACK_MSK (0x01U << TCPP0203_GD_PROVIDER_SWITCH_ACK_POS) +#define TCPP0203_GD_PROVIDER_SWITCH_ACK_OPEN (0x00U) +#define TCPP0203_GD_PROVIDER_SWITCH_ACK_CLOSED (TCPP0203_GD_PROVIDER_SWITCH_ACK_MSK) + +/** + * @brief TCPP0203 Gate Driver Consumer Acknowledge + */ +#define TCPP0203_GD_CONSUMER_SWITCH_ACK_POS (3U) +#define TCPP0203_GD_CONSUMER_SWITCH_ACK_MSK (0x01U << TCPP0203_GD_CONSUMER_SWITCH_ACK_POS) +#define TCPP0203_GD_CONSUMER_SWITCH_ACK_CLOSED (0x00U) +#define TCPP0203_GD_CONSUMER_SWITCH_ACK_OPEN (TCPP0203_GD_CONSUMER_SWITCH_ACK_MSK) + +/** + * @brief TCPP0203 Power Mode Acknowledge + */ +#define TCPP0203_POWER_MODE_ACK_POS (4U) +#define TCPP0203_POWER_MODE_ACK_MSK (0x03U << TCPP0203_POWER_MODE_ACK_POS) +#define TCPP0203_POWER_MODE_ACK_HIBERNATE (0x00U) +#define TCPP0203_POWER_MODE_ACK_LOWPOWER (0x01U << TCPP0203_POWER_MODE_ACK_POS) +#define TCPP0203_POWER_MODE_ACK_NORMAL (0x02U << TCPP0203_POWER_MODE_ACK_POS) + +/** + * @brief TCPP0203 VBUS Discharge Acknowledge + */ +#define TCPP0203_VBUS_DISCHARGE_ACK_POS (6U) +#define TCPP0203_VBUS_DISCHARGE_ACK_MSK (0x01U << TCPP0203_VBUS_DISCHARGE_ACK_POS) +#define TCPP0203_VBUS_DISCHARGE_ACK_OFF (0x00U) +#define TCPP0203_VBUS_DISCHARGE_ACK_ON (TCPP0203_VBUS_DISCHARGE_ACK_MSK) + +/** + * @brief TCPP0203 VConn Discharge Acknowledge + */ +#define TCPP0203_VCONN_DISCHARGE_ACK_POS (7U) +#define TCPP0203_VCONN_DISCHARGE_ACK_MSK (0x01U << TCPP0203_VCONN_DISCHARGE_ACK_POS) +#define TCPP0203_VCONN_DISCHARGE_ACK_OFF (0x00U) +#define TCPP0203_VCONN_DISCHARGE_ACK_ON (TCPP0203_VCONN_DISCHARGE_ACK_MSK) + +/** + * @brief TCPP0203 OCP Vconn Flag management + */ +#define TCPP0203_FLAG_OCP_VCONN_POS (0U) +#define TCPP0203_FLAG_OCP_VCONN_MSK (0x01U << TCPP0203_FLAG_OCP_VCONN_POS) +#define TCPP0203_FLAG_OCP_VCONN_SET (TCPP0203_FLAG_OCP_VCONN_MSK) +#define TCPP0203_FLAG_OCP_VCONN_RESET (0x00U) + +/** + * @brief TCPP0203 OCP VBUS Flag management + */ +#define TCPP0203_FLAG_OCP_VBUS_POS (1U) +#define TCPP0203_FLAG_OCP_VBUS_MSK (0x01U << TCPP0203_FLAG_OCP_VBUS_POS) +#define TCPP0203_FLAG_OCP_VBUS_SET (TCPP0203_FLAG_OCP_VBUS_MSK) +#define TCPP0203_FLAG_OCP_VBUS_RESET (0x00U) + +/** + * @brief TCPP0203 OVP VBUS Flag management + */ +#define TCPP0203_FLAG_OVP_VBUS_POS (2U) +#define TCPP0203_FLAG_OVP_VBUS_MSK (0x01U << TCPP0203_FLAG_OVP_VBUS_POS) +#define TCPP0203_FLAG_OVP_VBUS_SET (TCPP0203_FLAG_OVP_VBUS_MSK) +#define TCPP0203_FLAG_OVP_VBUS_RESET (0x00U) + +/** + * @brief TCPP0203 OVP CC Flag management + */ +#define TCPP0203_FLAG_OVP_CC_POS (3U) +#define TCPP0203_FLAG_OVP_CC_MSK (0x01U << TCPP0203_FLAG_OVP_CC_POS) +#define TCPP0203_FLAG_OVP_CC_SET (TCPP0203_FLAG_OVP_CC_MSK) +#define TCPP0203_FLAG_OVP_CC_RESET (0x00U) + +/** + * @brief TCPP0203 OTP Flag management + */ +#define TCPP0203_FLAG_OTP_POS (4U) +#define TCPP0203_FLAG_OTP_MSK (0x01U << TCPP0203_FLAG_OTP_POS) +#define TCPP0203_FLAG_OTP_SET (TCPP0203_FLAG_OTP_MSK) +#define TCPP0203_FLAG_OTP_RESET (0x00U) + +/** + * @brief TCPP0203 VBUS OK Flag management + */ +#define TCPP0203_FLAG_VBUS_OK_POS (5U) +#define TCPP0203_FLAG_VBUS_OK_MSK (0x01U << TCPP0203_FLAG_VBUS_OK_POS) +#define TCPP0203_FLAG_VBUS_OK_SET (TCPP0203_FLAG_VBUS_OK_MSK) +#define TCPP0203_FLAG_VBUS_OK_RESET (0x00U) + +/** + * @brief TCPP0203 VConn Power + */ +#define TCPP0203_FLAG_VCONN_PWR_POS (6U) +#define TCPP0203_FLAG_VCONN_PWR_MSK (0x01U << TCPP0203_FLAG_VCONN_PWR_POS) +#define TCPP0203_FLAG_VCONN_PWR_1W (TCPP0203_FLAG_VCONN_PWR_MSK) +#define TCPP0203_FLAG_VCONN_PWR_0_1W (0x00U) + +/** + * @brief TCPP0203 Device Type + */ +#define TCPP0203_DEVICE_TYPE_POS (7U) +#define TCPP0203_DEVICE_TYPE_MSK (0x01U << TCPP0203_DEVICE_TYPE_POS) +#define TCPP0203_DEVICE_TYPE_02 (TCPP0203_DEVICE_TYPE_MSK) +#define TCPP0203_DEVICE_TYPE_03 (0x00U) + +/** + * @} + */ + +/** @defgroup TCPP0203_Exported_Macros TCPP0203 Exported Macros + * @{ + */ +/** + * @} + */ + +/** @defgroup TCPP0203_Exported_Functions TCPP0203 Exported Functions + * @{ + */ + +/*------------------------------------------------------------------------------ + TCPP02/03 Type-C port protection functions +------------------------------------------------------------------------------*/ +/* High Layer codec functions */ +int32_t TCPP0203_RegisterBusIO(TCPP0203_Object_t *pObj, TCPP0203_IO_t *pIO); +int32_t TCPP0203_Init(TCPP0203_Object_t *pObj); +int32_t TCPP0203_DeInit(TCPP0203_Object_t *pObj); +int32_t TCPP0203_Reset(TCPP0203_Object_t *pObj); +int32_t TCPP0203_SetVConnSwitch(TCPP0203_Object_t *pObj, uint8_t VConnSwitch); +int32_t TCPP0203_SetGateDriverProvider(TCPP0203_Object_t *pObj, uint8_t GateDriverProvider); +int32_t TCPP0203_SetGateDriverConsumer(TCPP0203_Object_t *pObj, uint8_t GateDriverConsumer); +int32_t TCPP0203_SetPowerMode(TCPP0203_Object_t *pObj, uint8_t PowerMode); +int32_t TCPP0203_SetVBusDischarge(TCPP0203_Object_t *pObj, uint8_t VBusDischarge); +int32_t TCPP0203_SetVConnDischarge(TCPP0203_Object_t *pObj, uint8_t VConnDischarge); +int32_t TCPP0203_GetVConnSwitchAck(TCPP0203_Object_t *pObj, uint8_t *pVConnSwitchAck); +int32_t TCPP0203_GetGateDriverProviderAck(TCPP0203_Object_t *pObj, uint8_t *pGateDriverProviderAck); +int32_t TCPP0203_GetGateDriverConsumerAck(TCPP0203_Object_t *pObj, uint8_t *pGateDriverConsumerAck); +int32_t TCPP0203_GetPowerModeAck(TCPP0203_Object_t *pObj, uint8_t *pPowerModeAck); +int32_t TCPP0203_GetVBusDischargeAck(TCPP0203_Object_t *pObj, uint8_t *pVBusDischargeAck); +int32_t TCPP0203_GetVConnDischargeAck(TCPP0203_Object_t *pObj, uint8_t *pVConnDischargeAck); +int32_t TCPP0203_GetOCPVConnFlag(TCPP0203_Object_t *pObj, uint8_t *pOCPVConnFlag); +int32_t TCPP0203_GetOCPVBusFlag(TCPP0203_Object_t *pObj, uint8_t *pGetOCPVBusFlag); +int32_t TCPP0203_GetOVPVBusFlag(TCPP0203_Object_t *pObj, uint8_t *pOVPVBusFlag); +int32_t TCPP0203_GetOVPCCFlag(TCPP0203_Object_t *pObj, uint8_t *pOVPCCFlag); +int32_t TCPP0203_GetOTPFlag(TCPP0203_Object_t *pObj, uint8_t *pOTPFlag); +int32_t TCPP0203_GetVBusOkFlag(TCPP0203_Object_t *pObj, uint8_t *pVBusOkFlag); +int32_t TCPP0203_ReadTCPPType(TCPP0203_Object_t *pObj, uint8_t *pTCPPType); +int32_t TCPP0203_ReadVCONNPower(TCPP0203_Object_t *pObj, uint8_t *pVCONNPower); +int32_t TCPP0203_WriteCtrlRegister(TCPP0203_Object_t *pObj, uint8_t *pCtrlRegister); +int32_t TCPP0203_ReadAckRegister(TCPP0203_Object_t *pObj, uint8_t *pAckRegister); +int32_t TCPP0203_ReadFlagRegister(TCPP0203_Object_t *pObj, uint8_t *pFlagRegister); + +/** + * @} + */ + +/* TCPP02/03 Type-C port protection driver structure */ +extern TCPP0203_Drv_t TCPP0203_Driver; + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#endif /* TCPP0203_H */ diff --git a/hw/bsp/stm32n6/boards/stm32n657nucleo/tcpp0203/tcpp0203_reg.c b/hw/bsp/stm32n6/boards/stm32n657nucleo/tcpp0203/tcpp0203_reg.c new file mode 100644 index 000000000..8025fa85e --- /dev/null +++ b/hw/bsp/stm32n6/boards/stm32n657nucleo/tcpp0203/tcpp0203_reg.c @@ -0,0 +1,73 @@ +/** + ****************************************************************************** + * @file tcpp0203_reg.c + * @author MCD Application Team + * @brief This file provides unitary register function to control the TCPP02-03 + * Type-C port protection driver. + ****************************************************************************** + * @attention + * + * Copyright (c) 2021 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "tcpp0203_reg.h" + +/** @addtogroup BSP + * @{ + */ + +/** @addtogroup Components + * @{ + */ + +/** @addtogroup TCPP0203 + * @brief This file provides a set of functions needed to drive the + * TCPP02/03 Type-C port protection codec. + * @{ + */ + +/************** Generic Function *******************/ +/******************************************************************************* + * Function Name : tcpp0203_read_reg + * Description : Generic Reading function. It must be fulfilled with either + * I2C or SPI reading functions + * Input : Register Address, length of buffer + * Output : data Read + *******************************************************************************/ +int32_t tcpp0203_read_reg(const TCPP0203_ctx_t *ctx, uint8_t reg, uint8_t *data, uint8_t length) +{ + return ctx->ReadReg(ctx->handle, reg, data, length); +} + +/******************************************************************************* + * Function Name : tcpp0203_write_reg + * Description : Generic Writing function. It must be fulfilled with either + * I2C or SPI writing function + * Input : Register Address, data to be written, length of buffer + * Output : None + *******************************************************************************/ +int32_t tcpp0203_write_reg(const TCPP0203_ctx_t *ctx, uint8_t reg, uint8_t *data, uint8_t length) +{ + return ctx->WriteReg(ctx->handle, reg, data, length); +} + +/******************************************************************************/ +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ diff --git a/hw/bsp/stm32n6/boards/stm32n657nucleo/tcpp0203/tcpp0203_reg.h b/hw/bsp/stm32n6/boards/stm32n657nucleo/tcpp0203/tcpp0203_reg.h new file mode 100644 index 000000000..92420e1fe --- /dev/null +++ b/hw/bsp/stm32n6/boards/stm32n657nucleo/tcpp0203/tcpp0203_reg.h @@ -0,0 +1,98 @@ +/** + ****************************************************************************** + * @file tcpp0203_reg.h + * @author MCD Application Team + * @brief Header of tcpp0203_reg.c + * + ****************************************************************************** + * @attention + * + * Copyright (c) 2021 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef TCPP0203_REG_H +#define TCPP0203_REG_H + +#include + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +/** @addtogroup BSP + * @{ + */ + +/** @addtogroup Component + * @{ + */ + +/** @addtogroup TCPP0203 + * @{ + */ + + +/** @defgroup TCPP0203_Exported_Constants TCPP0203 Exported Constants + * @{ + */ +/******************************************************************************/ +/****************************** REGISTER MAPPING ******************************/ +/******************************************************************************/ +#define TCPP0203_WRITE_REG 0x00U +#define TCPP0203_PROG_CTRL TCPP0203_WRITE_REG +#define TCPP0203_READ_REG1 0x01U +#define TCPP0203_ACK_REG TCPP0203_READ_REG1 +#define TCPP0203_READ_REG2 0x02U +#define TCPP0203_FLAG_REG TCPP0203_READ_REG2 + +/** + * @} + */ + +/************** Generic Function *******************/ + +typedef int32_t (*TCPP0203_Write_Func)(const void *, uint8_t, uint8_t *, uint8_t); +typedef int32_t (*TCPP0203_Read_Func)(const void *, uint8_t, uint8_t *, uint8_t); + +typedef struct +{ + TCPP0203_Write_Func WriteReg; + TCPP0203_Read_Func ReadReg; + void *handle; +} TCPP0203_ctx_t; + +/******************************************************************************* + * Register : Generic - All + * Address : Generic - All + * Bit Group Name: None + * Permission : W + *******************************************************************************/ +int32_t tcpp0203_write_reg(const TCPP0203_ctx_t *ctx, uint8_t reg, uint8_t *data, uint8_t length); +int32_t tcpp0203_read_reg(const TCPP0203_ctx_t *ctx, uint8_t reg, uint8_t *data, uint8_t length); + +#ifdef __cplusplus +} +#endif + +#endif /* TCPP0203_REG_H */ + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ diff --git a/hw/bsp/stm32n6/family.c b/hw/bsp/stm32n6/family.c new file mode 100644 index 000000000..0ec1875ac --- /dev/null +++ b/hw/bsp/stm32n6/family.c @@ -0,0 +1,276 @@ +/* + * The MIT License (MIT) + * + * Copyright (c) 2019 + * William D. Jones (thor0505@comcast.net), + * Ha Thach (tinyusb.org) + * Uwe Bonnes (bon@elektron.ikp.physik.tu-darmstadt.de + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + * This file is part of the TinyUSB stack. + */ + +/* metadata: + manufacturer: STMicroelectronics +*/ + +// Suppress warning caused by mcu driver +#ifdef __GNUC__ +#pragma GCC diagnostic push +#pragma GCC diagnostic ignored "-Wcast-align" +#endif + +#include "stm32n6xx_hal.h" + +#ifdef __GNUC__ +#pragma GCC diagnostic pop +#endif + +#include "bsp/board_api.h" + +TU_ATTR_UNUSED static void Error_Handler(void) { } + +void HardFault_Handler(void); + +typedef struct { + GPIO_TypeDef* port; + GPIO_InitTypeDef pin_init; + uint8_t active_state; +} board_pindef_t; + +#include "board.h" + +//--------------------------------------------------------------------+ +// MACRO TYPEDEF CONSTANT ENUM +//--------------------------------------------------------------------+ + +#ifdef UART_DEV +UART_HandleTypeDef UartHandle = { + .Instance = UART_DEV, + .Init = { + .BaudRate = CFG_BOARD_UART_BAUDRATE, + .WordLength = UART_WORDLENGTH_8B, + .StopBits = UART_STOPBITS_1, + .Parity = UART_PARITY_NONE, + .HwFlowCtl = UART_HWCONTROL_NONE, + .Mode = UART_MODE_TX_RX, + .OverSampling = UART_OVERSAMPLING_16, + } +}; +#endif + +#ifndef SWO_FREQ +#define SWO_FREQ 4000000 +#endif + +//--------------------------------------------------------------------+ +// Forward USB interrupt events to TinyUSB IRQ Handler +//--------------------------------------------------------------------+ + +// Despite being call USB2_OTG_FS on some MCUs +// OTG_FS is marked as RHPort0 by TinyUSB to be consistent across stm32 port +void USB2_OTG_HS_IRQHandler(void) { + tusb_int_handler(0, true); +} + +// Despite being call USB1_OTG_HS on some MCUs +// OTG_HS is marked as RHPort1 by TinyUSB to be consistent across stm32 port +void USB1_OTG_HS_IRQHandler(void) { + tusb_int_handler(1, true); +} + +void board_init(void) { + + /* Enable BusFault and SecureFault handlers (HardFault is default) */ + SCB->SHCSR |= (SCB_SHCSR_BUSFAULTENA_Msk | SCB_SHCSR_SECUREFAULTENA_Msk); + + HAL_PWREx_EnableVddA(); + HAL_PWREx_EnableVddIO2(); + HAL_PWREx_EnableVddIO3(); + HAL_PWREx_EnableVddIO4(); + HAL_PWREx_EnableVddIO5(); + + HAL_Init(); + + // Implemented in board.h + SystemClock_Config(); + + // Enable All GPIOs clocks + __HAL_RCC_GPIOA_CLK_ENABLE(); + __HAL_RCC_GPIOB_CLK_ENABLE(); + __HAL_RCC_GPIOC_CLK_ENABLE(); + __HAL_RCC_GPIOD_CLK_ENABLE(); + __HAL_RCC_GPIOE_CLK_ENABLE(); + __HAL_RCC_GPIOF_CLK_ENABLE(); + __HAL_RCC_GPIOG_CLK_ENABLE(); + __HAL_RCC_GPIOH_CLK_ENABLE(); + __HAL_RCC_GPION_CLK_ENABLE(); + __HAL_RCC_GPIOO_CLK_ENABLE(); + __HAL_RCC_GPIOP_CLK_ENABLE(); + __HAL_RCC_GPIOQ_CLK_ENABLE(); + + // HAL_ICACHE_Enable(); + + for (uint8_t i = 0; i < TU_ARRAY_SIZE(board_pindef); i++) { + HAL_GPIO_Init(board_pindef[i].port, &board_pindef[i].pin_init); + } + + NVIC_SetPriority(UCPD1_IRQn, NVIC_EncodePriority(NVIC_GetPriorityGrouping(),5, 0)); + NVIC_EnableIRQ(UCPD1_IRQn); + +#if CFG_TUSB_OS == OPT_OS_NONE + // 1ms tick timer + SysTick_Config(SystemCoreClock / 1000); + +#elif CFG_TUSB_OS == OPT_OS_FREERTOS + // Explicitly disable systick to prevent its ISR runs before scheduler start + SysTick->CTRL &= ~1U; + + // If freeRTOS is used, IRQ priority is limit by max syscall ( smaller is higher ) + + NVIC_SetPriority(OTG_HS_IRQn, configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY ); +#endif + + + +#ifdef UART_DEV + UART_CLK_EN(); + HAL_UART_Init(&UartHandle); +#endif + + + __HAL_RCC_USB1_OTG_HS_CLK_ENABLE(); + __HAL_RCC_PWR_CLK_ENABLE(); + HAL_PWREx_EnableVddUSBVMEN(); + while(__HAL_PWR_GET_FLAG(PWR_FLAG_USB33RDY)); + HAL_PWREx_EnableVddUSB(); + + LL_AHB5_GRP1_ForceReset(0x00800000); + __HAL_RCC_USB1_OTG_HS_FORCE_RESET(); + __HAL_RCC_USB1_OTG_HS_PHY_FORCE_RESET(); + + LL_RCC_HSE_SelectHSEDiv2AsDiv2Clock(); + LL_AHB5_GRP1_ReleaseReset(0x00800000); + + /* Peripheral clock enable */ + __HAL_RCC_USB1_OTG_HS_CLK_ENABLE(); + + /* Required few clock cycles before accessing USB PHY Controller Registers */ + HAL_Delay(1); + + USB1_HS_PHYC->USBPHYC_CR &= ~(0x7 << 0x4); + + USB1_HS_PHYC->USBPHYC_CR |= (0x1 << 16) | + (0x2 << 4) | + (0x1 << 2) | + 0x1U; + + __HAL_RCC_USB1_OTG_HS_PHY_RELEASE_RESET(); + + /* Required few clock cycles before Releasing Reset */ + HAL_Delay(1); + + __HAL_RCC_USB1_OTG_HS_RELEASE_RESET(); + + /* Peripheral PHY clock enable */ + __HAL_RCC_USB1_OTG_HS_PHY_CLK_ENABLE(); + + board_init2(); + +#if CFG_TUH_ENABLED + board_vbus_set(BOARD_TUH_RHPORT, 1); +#endif +} + +//--------------------------------------------------------------------+ +// Board porting API +//--------------------------------------------------------------------+ + +void board_led_write(bool state) { +#ifdef PINID_LED + board_pindef_t* pindef = &board_pindef[PINID_LED]; + GPIO_PinState pin_state = state == pindef->active_state ? GPIO_PIN_SET : GPIO_PIN_RESET; + HAL_GPIO_WritePin(pindef->port, pindef->pin_init.Pin, pin_state); +#else + (void) state; +#endif +} + +uint32_t board_button_read(void) { +#ifdef PINID_BUTTON + board_pindef_t* pindef = &board_pindef[PINID_BUTTON]; + return pindef->active_state == HAL_GPIO_ReadPin(pindef->port, pindef->pin_init.Pin); +#else + return 0; +#endif +} + +size_t board_get_unique_id(uint8_t id[], size_t max_len) { + (void) max_len; + volatile uint32_t * stm32_uuid = (volatile uint32_t *) UID_BASE; + uint32_t* id32 = (uint32_t*) (uintptr_t) id; + uint8_t const len = 12; + + id32[0] = stm32_uuid[0]; + id32[1] = stm32_uuid[1]; + id32[2] = stm32_uuid[2]; + + return len; +} + +int board_uart_read(uint8_t *buf, int len) { + (void) buf; + (void) len; + return 0; +} + +int board_uart_write(void const *buf, int len) { +#ifdef UART_DEV + HAL_UART_Transmit(&UartHandle, (uint8_t * )(uintptr_t) + buf, len, 0xffff); + return len; +#else + (void) buf; (void) len; + return -1; +#endif +} + +#if CFG_TUSB_OS == OPT_OS_NONE +volatile uint32_t system_ticks = 0; + +void SysTick_Handler(void) { + HAL_IncTick(); + system_ticks++; +} + +uint32_t board_millis(void) { + return system_ticks; +} + +#endif + +void HardFault_Handler(void) { + __asm("BKPT #0\n"); +} + +// Required by __libc_init_array in startup code if we are compiling using +// -nostdlib/-nostartfiles. +void _init(void) { +} diff --git a/hw/bsp/stm32n6/family.cmake b/hw/bsp/stm32n6/family.cmake new file mode 100644 index 000000000..600af7cdb --- /dev/null +++ b/hw/bsp/stm32n6/family.cmake @@ -0,0 +1,147 @@ +include_guard() + +set(ST_FAMILY n6) +set(ST_PREFIX stm32${ST_FAMILY}xx) + +set(ST_HAL_DRIVER ${TOP}/hw/mcu/st/stm32${ST_FAMILY}xx_hal_driver) +set(ST_CMSIS ${TOP}/hw/mcu/st/cmsis_device_${ST_FAMILY}) +set(CMSIS_5 ${TOP}/lib/CMSIS_5) + +# include board specific +include(${CMAKE_CURRENT_LIST_DIR}/boards/${BOARD}/board.cmake) + +# toolchain set up +set(CMAKE_SYSTEM_CPU cortex-m55 CACHE INTERNAL "System Processor") +set(CMAKE_TOOLCHAIN_FILE ${TOP}/examples/build_system/cmake/toolchain/arm_${TOOLCHAIN}.cmake) + +set(FAMILY_MCUS STM32N6 CACHE INTERNAL "") + +# ---------------------- +# Port & Speed Selection +# ---------------------- +if (NOT DEFINED RHPORT_DEVICE) + set(RHPORT_DEVICE 1) +endif () +if (NOT DEFINED RHPORT_HOST) + set(RHPORT_HOST 1) +endif () + +if (NOT DEFINED RHPORT_SPEED) + set(RHPORT_SPEED OPT_MODE_FULL_SPEED OPT_MODE_HIGH_SPEED) +endif () +if (NOT DEFINED RHPORT_DEVICE_SPEED) + list(GET RHPORT_SPEED ${RHPORT_DEVICE} RHPORT_DEVICE_SPEED) +endif () +if (NOT DEFINED RHPORT_HOST_SPEED) + list(GET RHPORT_SPEED ${RHPORT_HOST} RHPORT_HOST_SPEED) +endif () + +cmake_print_variables(RHPORT_DEVICE RHPORT_DEVICE_SPEED RHPORT_HOST RHPORT_HOST_SPEED) + +#------------------------------------ +# BOARD_TARGET +#------------------------------------ +# only need to be built ONCE for all examples +function(add_board_target BOARD_TARGET) + if (TARGET ${BOARD_TARGET}) + return() + endif() + + # Startup & Linker script + set(STARTUP_FILE_GNU ${ST_CMSIS}/Source/Templates/gcc/startup_${MCU_VARIANT}.s) + set(STARTUP_FILE_Clang ${STARTUP_FILE_GNU}) + set(STARTUP_FILE_IAR ${ST_CMSIS}/Source/Templates/iar/startup_${MCU_VARIANT}.s) + + if(NOT DEFINED LD_FILE_GNU) + set(LD_FILE_GNU ${ST_CMSIS}/Source/Templates/gcc/linker/${MCU_VARIANT}_flash.ld) + endif() + set(LD_FILE_Clang ${LD_FILE_GNU}) + if(NOT DEFINED LD_FILE_IAR) + set(LD_FILE_IAR ${ST_CMSIS}/Source/Templates/iar/linker/${MCU_VARIANT}_flash.icf) + endif() + + add_library(${BOARD_TARGET} STATIC + ${ST_CMSIS}/Source/Templates/system_${ST_PREFIX}_ns.c + ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal.c + ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal_cortex.c + ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal_dma.c + ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal_gpio.c + ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal_pwr.c + ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal_i2c.c + ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal_pwr_ex.c + ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal_rcc.c + ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal_rcc_ex.c + ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal_uart.c + ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal_uart_ex.c + ${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} + ) + target_include_directories(${BOARD_TARGET} PUBLIC + ${CMAKE_CURRENT_FUNCTION_LIST_DIR} + ${CMSIS_5}/CMSIS/Core/Include + ${ST_CMSIS}/Include + ${ST_HAL_DRIVER}/Inc + ) + target_compile_definitions(${BOARD_TARGET} PUBLIC + BOARD_TUD_RHPORT=${RHPORT_DEVICE} + BOARD_TUD_MAX_SPEED=${RHPORT_DEVICE_SPEED} + BOARD_TUH_RHPORT=${RHPORT_HOST} + BOARD_TUH_MAX_SPEED=${RHPORT_HOST_SPEED} + ) + + update_board(${BOARD_TARGET}) + + if (CMAKE_C_COMPILER_ID STREQUAL "GNU") + target_link_options(${BOARD_TARGET} PUBLIC + "LINKER:--script=${LD_FILE_GNU}" + -nostartfiles + --specs=nosys.specs --specs=nano.specs + ) + elseif (CMAKE_C_COMPILER_ID STREQUAL "Clang") + target_link_options(${BOARD_TARGET} PUBLIC + "LINKER:--script=${LD_FILE_Clang}" + ) + elseif (CMAKE_C_COMPILER_ID STREQUAL "IAR") + target_link_options(${BOARD_TARGET} PUBLIC + "LINKER:--config=${LD_FILE_IAR}" + ) + endif () +endfunction() + + +#------------------------------------ +# Functions +#------------------------------------ +function(family_configure_example TARGET RTOS) + family_configure_common(${TARGET} ${RTOS}) + + # Board target + add_board_target(board_${BOARD}) + + #---------- Port Specific ---------- + # These files are built for each example since it depends on example's tusb_config.h + target_sources(${TARGET} PUBLIC + # BSP + ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/family.c + ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/../board.c + ) + target_include_directories(${TARGET} PUBLIC + # family, hw, board + ${CMAKE_CURRENT_FUNCTION_LIST_DIR} + ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/../../ + ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/boards/${BOARD} + ) + + # Add TinyUSB target and port source + family_add_tinyusb(${TARGET} OPT_MCU_STM32N6 ${RTOS}) + target_sources(${TARGET} PUBLIC + ${TOP}/src/portable/synopsys/dwc2/dcd_dwc2.c + ${TOP}/src/portable/synopsys/dwc2/hcd_dwc2.c + ${TOP}/src/portable/synopsys/dwc2/dwc2_common.c + ) + target_link_libraries(${TARGET} PUBLIC board_${BOARD}) + + # Flashing + family_add_bin_hex(${TARGET}) + family_flash_stlink(${TARGET}) + family_flash_jlink(${TARGET}) +endfunction() diff --git a/hw/bsp/stm32n6/family.mk b/hw/bsp/stm32n6/family.mk new file mode 100644 index 000000000..97930e189 --- /dev/null +++ b/hw/bsp/stm32n6/family.mk @@ -0,0 +1,101 @@ +ST_FAMILY = n6 +ST_PREFIX = stm32${ST_FAMILY}xx +ST_PREFIX_LONG = stm32${ST_FAMILY}57xx +ST_CMSIS = hw/mcu/st/cmsis_device_$(ST_FAMILY) +ST_HAL_DRIVER = hw/mcu/st/${ST_PREFIX}_hal_driver + +UF2_FAMILY_ID = 0x6db66083 + +include $(TOP)/$(BOARD_PATH)/board.mk +CPU_CORE ?= cortex-m55 + +# ---------------------- +# Port & Speed Selection +# ---------------------- +RHPORT_SPEED ?= OPT_MODE_FULL_SPEED OPT_MODE_HIGH_SPEED +RHPORT_DEVICE ?= 1 +RHPORT_HOST ?= 1 + +# Determine RHPORT_DEVICE_SPEED if not defined +ifndef RHPORT_DEVICE_SPEED +ifeq ($(RHPORT_DEVICE), 0) + RHPORT_DEVICE_SPEED = $(firstword $(RHPORT_SPEED)) +else + RHPORT_DEVICE_SPEED = $(lastword $(RHPORT_SPEED)) +endif +endif + +# Determine RHPORT_HOST_SPEED if not defined +ifndef RHPORT_HOST_SPEED +ifeq ($(RHPORT_HOST), 0) + RHPORT_HOST_SPEED = $(firstword $(RHPORT_SPEED)) +else + RHPORT_HOST_SPEED = $(lastword $(RHPORT_SPEED)) +endif +endif + +# -------------- +# Compiler Flags +# -------------- +CFLAGS += \ + -DCFG_TUSB_MCU=OPT_MCU_STM32N6 \ + -DBOARD_TUD_RHPORT=${RHPORT_DEVICE} \ + -DBOARD_TUD_MAX_SPEED=${RHPORT_DEVICE_SPEED} \ + -DBOARD_TUH_RHPORT=${RHPORT_HOST} \ + -DBOARD_TUH_MAX_SPEED=${RHPORT_HOST_SPEED} + +# GCC Flags +CFLAGS_GCC += \ + -flto \ + +# suppress warning caused by vendor mcu driver +CFLAGS_GCC += \ + -Wno-error=cast-align \ + -Wno-error=unused-parameter \ + +LDFLAGS_GCC += \ + -nostdlib -nostartfiles \ + --specs=nosys.specs --specs=nano.specs + +# ----------------- +# Sources & Include +# ----------------- + +SRC_C += \ + src/portable/synopsys/dwc2/dcd_dwc2.c \ + src/portable/synopsys/dwc2/hcd_dwc2.c \ + src/portable/synopsys/dwc2/dwc2_common.c \ + $(ST_CMSIS)/Source/Templates/system_${ST_PREFIX}_fsbl.c \ + $(ST_HAL_DRIVER)/Src/${ST_PREFIX}_hal.c \ + $(ST_HAL_DRIVER)/Src/${ST_PREFIX}_hal_cortex.c \ + $(ST_HAL_DRIVER)/Src/${ST_PREFIX}_hal_dma.c \ + $(ST_HAL_DRIVER)/Src/${ST_PREFIX}_hal_gpio.c \ + $(ST_HAL_DRIVER)/Src/${ST_PREFIX}_hal_hcd.c \ + $(ST_HAL_DRIVER)/Src/${ST_PREFIX}_hal_i2c.c \ + $(ST_HAL_DRIVER)/Src/${ST_PREFIX}_hal_pcd.c \ + $(ST_HAL_DRIVER)/Src/${ST_PREFIX}_hal_pcd_ex.c \ + $(ST_HAL_DRIVER)/Src/${ST_PREFIX}_hal_pwr.c \ + $(ST_HAL_DRIVER)/Src/${ST_PREFIX}_hal_pwr_ex.c \ + $(ST_HAL_DRIVER)/Src/${ST_PREFIX}_hal_rcc.c \ + $(ST_HAL_DRIVER)/Src/${ST_PREFIX}_hal_rcc_ex.c \ + $(ST_HAL_DRIVER)/Src/${ST_PREFIX}_hal_rif.c \ + $(ST_HAL_DRIVER)/Src/${ST_PREFIX}_hal_uart.c \ + $(ST_HAL_DRIVER)/Src/${ST_PREFIX}_hal_uart_ex.c \ + $(ST_HAL_DRIVER)/Src/${ST_PREFIX}_ll_usb.c \ + +INC += \ + $(TOP)/$(BOARD_PATH) \ + $(TOP)/lib/CMSIS_5/CMSIS/Core/Include \ + $(TOP)/$(ST_CMSIS)/Include \ + $(TOP)/$(ST_HAL_DRIVER)/Inc + +# Linker +LD_FILE_GCC = $(BOARD_PATH)/STM32N657XX_AXISRAM2_fsbl.ld + +# Startup +SRC_S_GCC += $(ST_CMSIS)/Source/Templates/gcc/startup_$(ST_PREFIX_LONG)_fsbl.s +SRC_S_IAR += $(ST_CMSIS)/Source/Templates/iar/startup_$(MCU_VARIANT).s + +# Linker +LD_FILE_GCC ?= $(ST_CMSIS)/Source/Templates/gcc/linker/$(ST_PREFIX_LONG)_flash.ld +LD_FILE_IAR ?= $(ST_CMSIS)/Source/Templates/iar/linker/$(MCU_VARIANT)_flash.icf diff --git a/hw/bsp/stm32n6/partition_stm32n657xx.h b/hw/bsp/stm32n6/partition_stm32n657xx.h new file mode 100644 index 000000000..713068609 --- /dev/null +++ b/hw/bsp/stm32n6/partition_stm32n657xx.h @@ -0,0 +1,792 @@ +/** + ****************************************************************************** + * @file partition_stm32n657xx.h + * @author MCD Application Team + * @brief CMSIS STM32N657xx Device Initial Setup for Secure / Non-Secure Zones + * for ARMCM55 based on CMSIS CORE V5.3.1 partition_ARMCM33.h Template. + * + * This file contains: + * - Initialize Security Attribution Unit (SAU) CTRL register + * - Setup behavior of Sleep and Exception Handling + * - Setup behavior of Floating Point Unit + * - Setup Interrupt Target + * + ******************************************************************************/ +/* + * Copyright (c) 2009-2016 ARM Limited. All rights reserved. + * Portions Copyright (c) 2023 STMicroelectronics, all rights reserved + * + * SPDX-License-Identifier: Apache-2.0 + * + * Licensed under the Apache License, Version 2.0 (the License); you may + * not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * http://www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an AS IS BASIS, WITHOUT + * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + */ + +#ifndef PARTITION_STM32N657XX_H +#define PARTITION_STM32N657XX_H + +/* +//-------- <<< Use Configuration Wizard in Context Menu >>> ----------------- +*/ + +/* +// Initialize Security Attribution Unit (SAU) CTRL register +*/ +#define SAU_INIT_CTRL 0 + +/* +// Enable SAU +// Value for SAU->CTRL register bit ENABLE +*/ +#define SAU_INIT_CTRL_ENABLE 0 + +/* +// When SAU is disabled +// <0=> All Memory is Secure +// <1=> All Memory is Non-Secure +// Value for SAU->CTRL register bit ALLNS +// When all Memory is Non-Secure (ALLNS is 1), IDAU can override memory map configuration. +*/ +#define SAU_INIT_CTRL_ALLNS 0 + +/* +// +*/ + +/* +// Initialize Security Attribution Unit (SAU) Address Regions +// SAU configuration specifies regions to be one of: +// - Secure and Non-Secure Callable +// - Non-Secure +// Note: All memory regions not configured by SAU are Secure +*/ +#define SAU_REGIONS_MAX 8 /* Max. number of SAU regions */ + +/* +// Initialize SAU Region 0 +// Setup SAU Region 0 memory attributes +*/ +#define SAU_INIT_REGION0 0 + +/* +// Start Address <0-0xFFFFFFE0> +*/ +#define SAU_INIT_START0 0x00000000 /* start address of SAU region 0 */ + +/* +// End Address <0x1F-0xFFFFFFFF> +*/ +#define SAU_INIT_END0 0x00000000 /* end address of SAU region 0 */ + +/* +// Region is +// <0=>Non-Secure +// <1=>Secure, Non-Secure Callable +*/ +#define SAU_INIT_NSC0 0 +/* +// +*/ + +/* +// Initialize SAU Region 1 +// Setup SAU Region 1 memory attributes +*/ +#define SAU_INIT_REGION1 0 + +/* +// Start Address <0-0xFFFFFFE0> +*/ +#define SAU_INIT_START1 0x00000000 /* start address of SAU region 1 */ + +/* +// End Address <0x1F-0xFFFFFFFF> +*/ +#define SAU_INIT_END1 0x00000000 /* end address of SAU region 1 */ + +/* +// Region is +// <0=>Non-Secure +// <1=>Secure, Non-Secure Callable +*/ +#define SAU_INIT_NSC1 0 +/* +// +*/ + +/* +// Initialize SAU Region 2 +// Setup SAU Region 2 memory attributes +*/ +#define SAU_INIT_REGION2 0 + +/* +// Start Address <0-0xFFFFFFE0> +*/ +#define SAU_INIT_START2 0x00000000 /* start address of SAU region 2 */ + +/* +// End Address <0x1F-0xFFFFFFFF> +*/ +#define SAU_INIT_END2 0x00000000 /* end address of SAU region 2 */ + +/* +// Region is +// <0=>Non-Secure +// <1=>Secure, Non-Secure Callable +*/ +#define SAU_INIT_NSC2 0 +/* +// +*/ + +/* +// Initialize SAU Region 3 +// Setup SAU Region 3 memory attributes +*/ +#define SAU_INIT_REGION3 0 + +/* +// Start Address <0-0xFFFFFFE0> +*/ +#define SAU_INIT_START3 0x00000000 /* start address of SAU region 3 */ + +/* +// End Address <0x1F-0xFFFFFFFF> +*/ +#define SAU_INIT_END3 0x00000000 /* end address of SAU region 3 */ + +/* +// Region is +// <0=>Non-Secure +// <1=>Secure, Non-Secure Callable +*/ +#define SAU_INIT_NSC3 0 +/* +// +*/ + +/* +// Initialize SAU Region 4 +// Setup SAU Region 4 memory attributes +*/ +#define SAU_INIT_REGION4 0 + +/* +// Start Address <0-0xFFFFFFE0> +*/ +#define SAU_INIT_START4 0x00000000 /* start address of SAU region 4 */ + +/* +// End Address <0x1F-0xFFFFFFFF> +*/ +#define SAU_INIT_END4 0x00000000 /* end address of SAU region 4 */ + +/* +// Region is +// <0=>Non-Secure +// <1=>Secure, Non-Secure Callable +*/ +#define SAU_INIT_NSC4 0 +/* +// +*/ + +/* +// Initialize SAU Region 5 +// Setup SAU Region 5 memory attributes +*/ +#define SAU_INIT_REGION5 0 + +/* +// Start Address <0-0xFFFFFFE0> +*/ +#define SAU_INIT_START5 0x00000000 /* start address of SAU region 5 */ + +/* +// End Address <0x1F-0xFFFFFFFF> +*/ +#define SAU_INIT_END5 0x00000000 /* end address of SAU region 5 */ + +/* +// Region is +// <0=>Non-Secure +// <1=>Secure, Non-Secure Callable +*/ +#define SAU_INIT_NSC5 0 +/* +// +*/ + +/* +// Initialize SAU Region 6 +// Setup SAU Region 6 memory attributes +*/ +#define SAU_INIT_REGION6 0 + +/* +// Start Address <0-0xFFFFFFE0> +*/ +#define SAU_INIT_START6 0x00000000 /* start address of SAU region 6 */ + +/* +// End Address <0x1F-0xFFFFFFFF> +*/ +#define SAU_INIT_END6 0x00000000 /* end address of SAU region 6 */ + +/* +// Region is +// <0=>Non-Secure +// <1=>Secure, Non-Secure Callable +*/ +#define SAU_INIT_NSC6 0 +/* +// +*/ + +/* +// Initialize SAU Region 7 +// Setup SAU Region 7 memory attributes +*/ +#define SAU_INIT_REGION7 0 + +/* +// Start Address <0-0xFFFFFFE0> +*/ +#define SAU_INIT_START7 0x00000000 /* start address of SAU region 7 */ + +/* +// End Address <0x1F-0xFFFFFFFF> +*/ +#define SAU_INIT_END7 0x00000000 /* end address of SAU region 7 */ + +/* +// Region is +// <0=>Non-Secure +// <1=>Secure, Non-Secure Callable +*/ +#define SAU_INIT_NSC7 0 +/* +// +*/ + +/* +// +*/ + +/* +// Setup behaviour of Sleep and Exception Handling +*/ +#define SCB_CSR_AIRCR_INIT 0 + +/* +// Deep Sleep can be enabled by +// <0=>Secure and Non-Secure state +// <1=>Secure state only +// Value for SCB->CSR register bit DEEPSLEEPS +*/ +#define SCB_CSR_DEEPSLEEPS_VAL 0 + +/* +// System reset request accessible from +// <0=> Secure and Non-Secure state +// <1=> Secure state only +// Value for SCB->AIRCR register bit SYSRESETREQS +*/ +#define SCB_AIRCR_SYSRESETREQS_VAL 0 + +/* +// Priority of Non-Secure exceptions is +// <0=> Not altered +// <1=> Lowered to 0x04-0x07 +// Value for SCB->AIRCR register bit PRIS +*/ +#define SCB_AIRCR_PRIS_VAL 0 + +/* +// BusFault, HardFault, and NMI target +// <0=> Secure state +// <1=> Non-Secure state +// Value for SCB->AIRCR register bit BFHFNMINS +*/ +#define SCB_AIRCR_BFHFNMINS_VAL 0 + +/* +// +*/ + +/* +// Setup behaviour of Floating Point Unit +*/ +#define TZ_FPU_NS_USAGE 1 + +/* +// Floating Point Unit usage +// <0=> Secure state only +// <3=> Secure and Non-Secure state +// Value for SCB->NSACR register bits CP10, CP11 +*/ +#define SCB_NSACR_CP10_11_VAL 3 + +/* +// Treat floating-point registers as Secure +// <0=> Disabled +// <1=> Enabled +// Value for FPU->FPCCR register bit TS +*/ +#define FPU_FPCCR_TS_VAL 0 + +/* +// Clear on return (CLRONRET) accessibility +// <0=> Secure and Non-Secure state +// <1=> Secure state only +// Value for FPU->FPCCR register bit CLRONRETS +*/ +#define FPU_FPCCR_CLRONRETS_VAL 0 + +/* +// Clear floating-point caller saved registers on exception return +// <0=> Disabled +// <1=> Enabled +// Value for FPU->FPCCR register bit CLRONRET +*/ +#define FPU_FPCCR_CLRONRET_VAL 1 + +/* +// +*/ + +/* +// Setup Interrupt Target +*/ + +/* +// Initialize ITNS 0 (Interrupts 0..31) +*/ +#define NVIC_INIT_ITNS0 1 + +/* +// Interrupts 0..31 +// PVD_IRQn <0=> Secure state <1=> Non-Secure state +// Reserved <0=> Secure state <1=> Non-Secure state +// DTS_IRQn <0=> Secure state <1=> Non-Secure state +// RCC_IRQn <0=> Secure state <1=> Non-Secure state +// LOCKUP_IRQn <0=> Secure state <1=> Non-Secure state +// CACHE_ECC_IRQn <0=> Secure state <1=> Non-Secure state +// TCM_ECC_IRQn <0=> Secure state <1=> Non-Secure state +// BKP_ECC_IRQn <0=> Secure state <1=> Non-Secure state +// FPU_IRQn <0=> Secure state <1=> Non-Secure state +// Reserved <0=> Secure state <1=> Non-Secure state +// RTC_S_IRQn <0=> Secure state <1=> Non-Secure state +// TAMP_IRQn <0=> Secure state <1=> Non-Secure state +// RIFSC_TAMPER_IRQn <0=> Secure state <1=> Non-Secure state +// IAC_IRQn <0=> Secure state <1=> Non-Secure state +// RCC_S_IRQn <0=> Secure state <1=> Non-Secure state +// Reserved <0=> Secure state <1=> Non-Secure state +// RTC_IRQn <0=> Secure state <1=> Non-Secure state +// Reserved <0=> Secure state <1=> Non-Secure state +// IWDG_IRQn <0=> Secure state <1=> Non-Secure state +// WWDG_IRQn <0=> Secure state <1=> Non-Secure state +// EXTI0_IRQn <0=> Secure state <1=> Non-Secure state +// EXTI1_IRQn <0=> Secure state <1=> Non-Secure state +// EXTI2_IRQn <0=> Secure state <1=> Non-Secure state +// EXTI3_IRQn <0=> Secure state <1=> Non-Secure state +// EXTI4_IRQn <0=> Secure state <1=> Non-Secure state +// EXTI5_IRQn <0=> Secure state <1=> Non-Secure state +// EXTI6_IRQn <0=> Secure state <1=> Non-Secure state +// EXTI7_IRQn <0=> Secure state <1=> Non-Secure state +// EXTI8_IRQn <0=> Secure state <1=> Non-Secure state +// EXTI9_IRQn <0=> Secure state <1=> Non-Secure state +// EXTI10_IRQn <0=> Secure state <1=> Non-Secure state +// EXTI11_IRQn <0=> Secure state <1=> Non-Secure state +*/ +#define NVIC_INIT_ITNS0_VAL 0x00000000 + +/* +// +*/ + +/* +// Initialize ITNS 1 (Interrupts 32..63) +*/ +#define NVIC_INIT_ITNS1 1 + +/* +// Interrupts 32..63 +// EXTI12_IRQn <0=> Secure state <1=> Non-Secure state +// EXTI13_IRQn <0=> Secure state <1=> Non-Secure state +// EXTI14_IRQn <0=> Secure state <1=> Non-Secure state +// EXTI15_IRQn <0=> Secure state <1=> Non-Secure state +// SAES_IRQn <0=> Secure state <1=> Non-Secure state +// CRYP_IRQn <0=> Secure state <1=> Non-Secure state +// PKA_IRQn <0=> Secure state <1=> Non-Secure state +// HASH_IRQn <0=> Secure state <1=> Non-Secure state +// RNG_IRQn <0=> Secure state <1=> Non-Secure state +// Reserved <0=> Secure state <1=> Non-Secure state +// MCE1_IRQn <0=> Secure state <1=> Non-Secure state +// MCE2_IRQn <0=> Secure state <1=> Non-Secure state +// MCE3_IRQn <0=> Secure state <1=> Non-Secure state +// MCE4_IRQn <0=> Secure state <1=> Non-Secure state +// ADC1_2_IRQn <0=> Secure state <1=> Non-Secure state +// CSI_IRQn <0=> Secure state <1=> Non-Secure state +// DCMIPP_IRQn <0=> Secure state <1=> Non-Secure state +// Reserved <0=> Secure state <1=> Non-Secure state +// Reserved <0=> Secure state <1=> Non-Secure state +// Reserved <0=> Secure state <1=> Non-Secure state +// PAHB_ERR_IRQn <0=> Secure state <1=> Non-Secure state +// NPU0_IRQn <0=> Secure state <1=> Non-Secure state +// NPU1_IRQn <0=> Secure state <1=> Non-Secure state +// NPU2_IRQn <0=> Secure state <1=> Non-Secure state +// NPU3_IRQn <0=> Secure state <1=> Non-Secure state +// CACHEAXI_IRQn <0=> Secure state <1=> Non-Secure state +// LTDC_LO_IRQn <0=> Secure state <1=> Non-Secure state +// LTDC_LO_ERR_IRQn <0=> Secure state <1=> Non-Secure state +// DMA2D_IRQn <0=> Secure state <1=> Non-Secure state +// JPEG_IRQn <0=> Secure state <1=> Non-Secure state +// VENC_IRQn <0=> Secure state <1=> Non-Secure state +// GFXMMU_IRQn <0=> Secure state <1=> Non-Secure state +*/ +#define NVIC_INIT_ITNS1_VAL 0x00000000 + +/* +// +*/ + +/* +// Initialize ITNS 2 (Interrupts 64..95) +*/ +#define NVIC_INIT_ITNS2 1 + +/* +// Interrupts 64..95 +// GFXTIM_IRQn <0=> Secure state <1=> Non-Secure state +// GPU2D_IRQn <0=> Secure state <1=> Non-Secure state +// GPU2D_ER_IRQn <0=> Secure state <1=> Non-Secure state +// ICACHE_IRQn <0=> Secure state <1=> Non-Secure state +// HPDMA1_Channel0_IRQn <0=> Secure state <1=> Non-Secure state +// HPDMA1_Channel1_IRQn <0=> Secure state <1=> Non-Secure state +// HPDMA1_Channel2_IRQn <0=> Secure state <1=> Non-Secure state +// HPDMA1_Channel3_IRQn <0=> Secure state <1=> Non-Secure state +// HPDMA1_Channel4_IRQn <0=> Secure state <1=> Non-Secure state +// HPDMA1_Channel5_IRQn <0=> Secure state <1=> Non-Secure state +// HPDMA1_Channel6_IRQn <0=> Secure state <1=> Non-Secure state +// HPDMA1_Channel7_IRQn <0=> Secure state <1=> Non-Secure state +// HPDMA1_Channel8_IRQn <0=> Secure state <1=> Non-Secure state +// HPDMA1_Channel9_IRQn <0=> Secure state <1=> Non-Secure state +// HPDMA1_Channel10_IRQn <0=> Secure state <1=> Non-Secure state +// HPDMA1_Channel11_IRQn <0=> Secure state <1=> Non-Secure state +// HPDMA1_Channel12_IRQn <0=> Secure state <1=> Non-Secure state +// HPDMA1_Channel13_IRQn <0=> Secure state <1=> Non-Secure state +// HPDMA1_Channel14_IRQn <0=> Secure state <1=> Non-Secure state +// HPDMA1_Channel15_IRQn <0=> Secure state <1=> Non-Secure state +// GPDMA1_Channel0_IRQn <0=> Secure state <1=> Non-Secure state +// GPDMA1_Channel1_IRQn <0=> Secure state <1=> Non-Secure state +// GPDMA1_Channel2_IRQn <0=> Secure state <1=> Non-Secure state +// GPDMA1_Channel3_IRQn <0=> Secure state <1=> Non-Secure state +// GPDMA1_Channel4_IRQn <0=> Secure state <1=> Non-Secure state +// GPDMA1_Channel5_IRQn <0=> Secure state <1=> Non-Secure state +// GPDMA1_Channel6_IRQn <0=> Secure state <1=> Non-Secure state +// GPDMA1_Channel7_IRQn <0=> Secure state <1=> Non-Secure state +// GPDMA1_Channel8_IRQn <0=> Secure state <1=> Non-Secure state +// GPDMA1_Channel9_IRQn <0=> Secure state <1=> Non-Secure state +// GPDMA1_Channel10_IRQn <0=> Secure state <1=> Non-Secure state +// GPDMA1_Channel11_IRQn <0=> Secure state <1=> Non-Secure state +*/ +#define NVIC_INIT_ITNS2_VAL 0x00000000 + +/* +// +*/ + +/* +// Initialize ITNS 3 (Interrupts 96..127) +*/ +#define NVIC_INIT_ITNS3 1 + +/* +// Interrupts 96..127 +// GPDMA1_Channel12_IRQn <0=> Secure state <1=> Non-Secure state +// GPDMA1_Channel13_IRQn <0=> Secure state <1=> Non-Secure state +// GPDMA1_Channel14_IRQn <0=> Secure state <1=> Non-Secure state +// GPDMA1_Channel15_IRQn <0=> Secure state <1=> Non-Secure state +// I2C1_EV_IRQn <0=> Secure state <1=> Non-Secure state +// I2C1_ER_IRQn <0=> Secure state <1=> Non-Secure state +// I2C2_EV_IRQn <0=> Secure state <1=> Non-Secure state +// I2C2_ER_IRQn <0=> Secure state <1=> Non-Secure state +// I2C3_EV_IRQn <0=> Secure state <1=> Non-Secure state +// I2C3_ER_IRQn <0=> Secure state <1=> Non-Secure state +// I2C4_EV_IRQn <0=> Secure state <1=> Non-Secure state +// I2C4_ER_IRQn <0=> Secure state <1=> Non-Secure state +// I3C1_EV_IRQn <0=> Secure state <1=> Non-Secure state +// I3C1_ER_IRQn <0=> Secure state <1=> Non-Secure state +// I3C2_EV_IRQn <0=> Secure state <1=> Non-Secure state +// I3C2_ER_IRQn <0=> Secure state <1=> Non-Secure state +// TIM1_BRK_IRQn <0=> Secure state <1=> Non-Secure state +// TIM1_UP_IRQn <0=> Secure state <1=> Non-Secure state +// TIM1_TRG_COM_IRQn <0=> Secure state <1=> Non-Secure state +// TIM1_CC_IRQn <0=> Secure state <1=> Non-Secure state +// TIM2_IRQn <0=> Secure state <1=> Non-Secure state +// TIM3_IRQn <0=> Secure state <1=> Non-Secure state +// TIM4_IRQn <0=> Secure state <1=> Non-Secure state +// TIM5_IRQn <0=> Secure state <1=> Non-Secure state +// TIM6_IRQn <0=> Secure state <1=> Non-Secure state +// TIM7_IRQn <0=> Secure state <1=> Non-Secure state +// TIM8_BRK_IRQn <0=> Secure state <1=> Non-Secure state +// TIM8_UP_IRQn <0=> Secure state <1=> Non-Secure state +// TIM8_TRG_COM_IRQn <0=> Secure state <1=> Non-Secure state +// TIM8_CC_IRQn <0=> Secure state <1=> Non-Secure state +// TIM9_IRQn <0=> Secure state <1=> Non-Secure state +// TIM10_IRQn <0=> Secure state <1=> Non-Secure state + +*/ +#define NVIC_INIT_ITNS3_VAL 0x00000000 + +/* +// +*/ + +/* +// Initialize ITNS 4 (Interrupts 128..159) +*/ +#define NVIC_INIT_ITNS4 1 + +/* +// Interrupts 128..159 +// TIM11_IRQn <0=> Secure state <1=> Non-Secure state +// TIM12_IRQn <0=> Secure state <1=> Non-Secure state +// TIM13_IRQn <0=> Secure state <1=> Non-Secure state +// TIM14_IRQn <0=> Secure state <1=> Non-Secure state +// TIM15_IRQn <0=> Secure state <1=> Non-Secure state +// TIM16_IRQn <0=> Secure state <1=> Non-Secure state +// TIM17_IRQn <0=> Secure state <1=> Non-Secure state +// TIM18_IRQn <0=> Secure state <1=> Non-Secure state +// LPTIM1_IRQn <0=> Secure state <1=> Non-Secure state +// LPTIM2_IRQn <0=> Secure state <1=> Non-Secure state +// LPTIM3_IRQn <0=> Secure state <1=> Non-Secure state +// LPTIM4_IRQn <0=> Secure state <1=> Non-Secure state +// LPTIM5_IRQn <0=> Secure state <1=> Non-Secure state +// ADF1_FLT0_IRQn <0=> Secure state <1=> Non-Secure state +// MDF1_FLT0_IRQn <0=> Secure state <1=> Non-Secure state +// MDF1_FLT1_IRQn <0=> Secure state <1=> Non-Secure state +// MDF1_FLT2_IRQn <0=> Secure state <1=> Non-Secure state +// MDF1_FLT3_IRQn <0=> Secure state <1=> Non-Secure state +// MDF1_FLT4_IRQn <0=> Secure state <1=> Non-Secure state +// MDF1_FLT5_IRQn <0=> Secure state <1=> Non-Secure state +// SAI1_A_IRQn <0=> Secure state <1=> Non-Secure state +// SAI1_B_IRQn <0=> Secure state <1=> Non-Secure state +// SAI2_A_IRQn <0=> Secure state <1=> Non-Secure state +// SAI2_B_IRQn <0=> Secure state <1=> Non-Secure state +// SPDIFRX1_IRQn <0=> Secure state <1=> Non-Secure state +// SPI1_IRQn <0=> Secure state <1=> Non-Secure state +// SPI2_IRQn <0=> Secure state <1=> Non-Secure state +// SPI3_IRQn <0=> Secure state <1=> Non-Secure state +// SPI4_IRQn <0=> Secure state <1=> Non-Secure state +// SPI5_IRQn <0=> Secure state <1=> Non-Secure state +// SPI6_IRQn <0=> Secure state <1=> Non-Secure state +// USART1_IRQn <0=> Secure state <1=> Non-Secure state + +*/ +#define NVIC_INIT_ITNS4_VAL 0x00000000 + +/* +// +*/ + +/* +// Initialize ITNS 5 (Interrupts 160..191) +*/ +#define NVIC_INIT_ITNS5 1 + +/* +// Interrupts 160..191 +// USART2_IRQn <0=> Secure state <1=> Non-Secure state +// USART3_IRQn <0=> Secure state <1=> Non-Secure state +// UART4_IRQn <0=> Secure state <1=> Non-Secure state +// UART5_IRQn <0=> Secure state <1=> Non-Secure state +// USART6_IRQn <0=> Secure state <1=> Non-Secure state +// UART7_IRQn <0=> Secure state <1=> Non-Secure state +// UART8_IRQn <0=> Secure state <1=> Non-Secure state +// UART9_IRQn <0=> Secure state <1=> Non-Secure state +// USART10_IRQn <0=> Secure state <1=> Non-Secure state +// LPUART1_IRQn <0=> Secure state <1=> Non-Secure state +// XSPI1_IRQn <0=> Secure state <1=> Non-Secure state +// XSPI2_IRQn <0=> Secure state <1=> Non-Secure state +// XSPI3_IRQn <0=> Secure state <1=> Non-Secure state +// FMC_IRQn <0=> Secure state <1=> Non-Secure state +// SDMMC1_IRQn <0=> Secure state <1=> Non-Secure state +// SDMMC2_IRQn <0=> Secure state <1=> Non-Secure state +// UCPD1_IRQn <0=> Secure state <1=> Non-Secure state +// USB1_OTG_HS_IRQn <0=> Secure state <1=> Non-Secure state +// USB2_OTG_HS_IRQn <0=> Secure state <1=> Non-Secure state +// ETH1_IRQn <0=> Secure state <1=> Non-Secure state +// FDCAN1_IT0_IRQn <0=> Secure state <1=> Non-Secure state +// FDCAN1_IT1_IRQn <0=> Secure state <1=> Non-Secure state +// FDCAN2_IT0_IRQn <0=> Secure state <1=> Non-Secure state +// FDCAN2_IT1_IRQn <0=> Secure state <1=> Non-Secure state +// FDCAN3_IT0_IRQn <0=> Secure state <1=> Non-Secure state +// FDCAN3_IT1_IRQn <0=> Secure state <1=> Non-Secure state +// FDCAN_CU_IRQn <0=> Secure state <1=> Non-Secure state +// MDIOS_IRQn <0=> Secure state <1=> Non-Secure state +// DCMI_PSSI_IRQn <0=> Secure state <1=> Non-Secure state +// WAKEUP_PIN_IRQn <0=> Secure state <1=> Non-Secure state +// CTI_INT0_IRQn <0=> Secure state <1=> Non-Secure state +// CTI_INT1_IRQn <0=> Secure state <1=> Non-Secure state + +*/ +#define NVIC_INIT_ITNS5_VAL 0x00000000 + +/* +// +*/ + +/* +// Initialize ITNS 6 (Interrupts 192..223) +*/ +#define NVIC_INIT_ITNS6 1 + +/* +// Interrupts 192..223 +// Reserved <0=> Secure state <1=> Non-Secure state +// LTDC_UP_IRQn <0=> Secure state <1=> Non-Secure state +// LTDC_UP_ERR_IRQn <0=> Secure state <1=> Non-Secure state + +*/ +#define NVIC_INIT_ITNS6_VAL 0x00000000 + +/* +// +*/ + +/* +// +*/ + + + +/* + max 8 SAU regions. + SAU regions are defined in partition.h + */ + +#define SAU_INIT_REGION(n) \ + SAU->RNR = (n & SAU_RNR_REGION_Msk); \ + SAU->RBAR = (SAU_INIT_START##n & SAU_RBAR_BADDR_Msk); \ + SAU->RLAR = (SAU_INIT_END##n & SAU_RLAR_LADDR_Msk) | \ + ((SAU_INIT_NSC##n << SAU_RLAR_NSC_Pos) & SAU_RLAR_NSC_Msk) | 1U + +/** + \brief Setup a SAU Region + \details Writes the region information contained in SAU_Region to the + registers SAU_RNR, SAU_RBAR, and SAU_RLAR + */ +__STATIC_INLINE void TZ_SAU_Setup (void) +{ + +#if defined (__SAUREGION_PRESENT) && (__SAUREGION_PRESENT == 1U) + + #if defined (SAU_INIT_REGION0) && (SAU_INIT_REGION0 == 1U) + SAU_INIT_REGION(0); + #endif + + #if defined (SAU_INIT_REGION1) && (SAU_INIT_REGION1 == 1U) + SAU_INIT_REGION(1); + #endif + + #if defined (SAU_INIT_REGION2) && (SAU_INIT_REGION2 == 1U) + SAU_INIT_REGION(2); + #endif + + #if defined (SAU_INIT_REGION3) && (SAU_INIT_REGION3 == 1U) + SAU_INIT_REGION(3); + #endif + + #if defined (SAU_INIT_REGION4) && (SAU_INIT_REGION4 == 1U) + SAU_INIT_REGION(4); + #endif + + #if defined (SAU_INIT_REGION5) && (SAU_INIT_REGION5 == 1U) + SAU_INIT_REGION(5); + #endif + + #if defined (SAU_INIT_REGION6) && (SAU_INIT_REGION6 == 1U) + SAU_INIT_REGION(6); + #endif + + #if defined (SAU_INIT_REGION7) && (SAU_INIT_REGION7 == 1U) + SAU_INIT_REGION(7); + #endif + + /* repeat this for all possible SAU regions */ + +#endif /* defined (__SAUREGION_PRESENT) && (__SAUREGION_PRESENT == 1U) */ + + + #if defined (SAU_INIT_CTRL) && (SAU_INIT_CTRL == 1U) + SAU->CTRL = ((SAU_INIT_CTRL_ENABLE << SAU_CTRL_ENABLE_Pos) & SAU_CTRL_ENABLE_Msk) | + ((SAU_INIT_CTRL_ALLNS << SAU_CTRL_ALLNS_Pos) & SAU_CTRL_ALLNS_Msk) ; + #endif + + #if defined (SCB_CSR_AIRCR_INIT) && (SCB_CSR_AIRCR_INIT == 1U) + SCB->SCR = (SCB->SCR & ~(SCB_SCR_SLEEPDEEPS_Msk )) | + ((SCB_CSR_DEEPSLEEPS_VAL << SCB_SCR_SLEEPDEEPS_Pos) & SCB_SCR_SLEEPDEEPS_Msk); + + SCB->AIRCR = (SCB->AIRCR & ~(SCB_AIRCR_VECTKEY_Msk | SCB_AIRCR_SYSRESETREQS_Msk | + SCB_AIRCR_BFHFNMINS_Msk | SCB_AIRCR_PRIS_Msk) ) | + ((0x05FAU << SCB_AIRCR_VECTKEY_Pos) & SCB_AIRCR_VECTKEY_Msk) | + ((SCB_AIRCR_SYSRESETREQS_VAL << SCB_AIRCR_SYSRESETREQS_Pos) & SCB_AIRCR_SYSRESETREQS_Msk) | + ((SCB_AIRCR_PRIS_VAL << SCB_AIRCR_PRIS_Pos) & SCB_AIRCR_PRIS_Msk) | + ((SCB_AIRCR_BFHFNMINS_VAL << SCB_AIRCR_BFHFNMINS_Pos) & SCB_AIRCR_BFHFNMINS_Msk); + #endif /* defined (SCB_CSR_AIRCR_INIT) && (SCB_CSR_AIRCR_INIT == 1U) */ + + #if defined (__FPU_USED) && (__FPU_USED == 1U) && \ + defined (TZ_FPU_NS_USAGE) && (TZ_FPU_NS_USAGE == 1U) + + SCB->NSACR = (SCB->NSACR & ~(SCB_NSACR_CP10_Msk | SCB_NSACR_CP11_Msk)) | + ((SCB_NSACR_CP10_11_VAL << SCB_NSACR_CP10_Pos) & (SCB_NSACR_CP10_Msk | SCB_NSACR_CP11_Msk)); + + FPU->FPCCR = (FPU->FPCCR & ~(FPU_FPCCR_TS_Msk | FPU_FPCCR_CLRONRETS_Msk | FPU_FPCCR_CLRONRET_Msk)) | + ((FPU_FPCCR_TS_VAL << FPU_FPCCR_TS_Pos ) & FPU_FPCCR_TS_Msk ) | + ((FPU_FPCCR_CLRONRETS_VAL << FPU_FPCCR_CLRONRETS_Pos) & FPU_FPCCR_CLRONRETS_Msk) | + ((FPU_FPCCR_CLRONRET_VAL << FPU_FPCCR_CLRONRET_Pos ) & FPU_FPCCR_CLRONRET_Msk ); + #endif + + #if defined (NVIC_INIT_ITNS0) && (NVIC_INIT_ITNS0 == 1U) + NVIC->ITNS[0] = NVIC_INIT_ITNS0_VAL; + #endif + + #if defined (NVIC_INIT_ITNS1) && (NVIC_INIT_ITNS1 == 1U) + NVIC->ITNS[1] = NVIC_INIT_ITNS1_VAL; + #endif + + #if defined (NVIC_INIT_ITNS2) && (NVIC_INIT_ITNS2 == 1U) + NVIC->ITNS[2] = NVIC_INIT_ITNS2_VAL; + #endif + + #if defined (NVIC_INIT_ITNS3) && (NVIC_INIT_ITNS3 == 1U) + NVIC->ITNS[3] = NVIC_INIT_ITNS3_VAL; + #endif + + #if defined (NVIC_INIT_ITNS4) && (NVIC_INIT_ITNS4 == 1U) + NVIC->ITNS[4] = NVIC_INIT_ITNS4_VAL; + #endif + + #if defined (NVIC_INIT_ITNS5) && (NVIC_INIT_ITNS5 == 1U) + NVIC->ITNS[5] = NVIC_INIT_ITNS5_VAL; + #endif + + #if defined (NVIC_INIT_ITNS6) && (NVIC_INIT_ITNS6 == 1U) + NVIC->ITNS[6] = NVIC_INIT_ITNS6_VAL; + #endif + +} + +#endif /* PARTITION_STM32N657XX_H */ diff --git a/hw/bsp/stm32n6/stm32n6xx_hal_conf.h b/hw/bsp/stm32n6/stm32n6xx_hal_conf.h new file mode 100644 index 000000000..d98d365a3 --- /dev/null +++ b/hw/bsp/stm32n6/stm32n6xx_hal_conf.h @@ -0,0 +1,504 @@ +/** + ****************************************************************************** + * @file stm32n6xx_hal_conf_template.h + * @author MCD Application Team + * @brief HAL configuration template file. + * This file should be copied to the application folder and renamed + * to stm32n6xx_hal_conf.h. + ****************************************************************************** + * @attention + * + * Copyright (c) 2023 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32N6xx_HAL_CONF_H +#define STM32N6xx_HAL_CONF_H + +#ifdef __cplusplus + extern "C" { +#endif + +/* Exported types ------------------------------------------------------------*/ +/* Exported constants --------------------------------------------------------*/ + +/* ########################## Module Selection ############################## */ +/** + * @brief This is the list of modules to be used in the HAL driver + */ +#define HAL_MODULE_ENABLED +/*#define HAL_ADC_MODULE_ENABLED */ +/*#define HAL_BSEC_MODULE_ENABLED */ +/*#define HAL_CRC_MODULE_ENABLED */ +/*#define HAL_CRYP_MODULE_ENABLED */ +/*#define HAL_DCMI_MODULE_ENABLED */ +/*#define HAL_DCMIPP_MODULE_ENABLED */ +/*#define HAL_DMA2D_MODULE_ENABLED */ +/*#define HAL_DTS_MODULE_ENABLED */ +/*#define HAL_ETH_MODULE_ENABLED */ +/*#define HAL_EXTI_MODULE_ENABLED */ +/*#define HAL_FDCAN_MODULE_ENABLED */ +/*#define HAL_GFXMMU_MODULE_ENABLED */ +/*#define HAL_GFXTIM_MODULE_ENABLED */ +/*#define HAL_HASH_MODULE_ENABLED */ +#define HAL_HCD_MODULE_ENABLED +#define HAL_I2C_MODULE_ENABLED +/*#define HAL_I2S_MODULE_ENABLED */ +/*#define HAL_I3C_MODULE_ENABLED */ +/*#define HAL_ICACHE_MODULE_ENABLED */ +/*#define HAL_IRDA_MODULE_ENABLED */ +/*#define HAL_IWDG_MODULE_ENABLED */ +/*#define HAL_JPEG_MODULE_ENABLED */ +/*#define HAL_LPTIM_MODULE_ENABLED */ +/*#define HAL_LTDC_MODULE_ENABLED */ +/*#define HAL_MCE_MODULE_ENABLED */ +/*#define HAL_MDF_MODULE_ENABLED */ +/*#define HAL_MMC_MODULE_ENABLED */ +/*#define HAL_NAND_MODULE_ENABLED */ +/*#define HAL_NOR_MODULE_ENABLED */ +#define HAL_PCD_MODULE_ENABLED +/*#define HAL_PKA_MODULE_ENABLED */ +/*#define HAL_PSSI_MODULE_ENABLED */ +/*#define HAL_RAMCFG_MODULE_ENABLED */ +#define HAL_RIF_MODULE_ENABLED +/*#define HAL_RNG_MODULE_ENABLED */ +/*#define HAL_RTC_MODULE_ENABLED */ +/*#define HAL_SAI_MODULE_ENABLED */ +/*#define HAL_SD_MODULE_ENABLED */ +/*#define HAL_SDIO_MODULE_ENABLED */ +/*#define HAL_SDRAM_MODULE_ENABLED */ +/*#define HAL_SMARTCARD_MODULE_ENABLED*/ +/*#define HAL_SMBUS_MODULE_ENABLED */ +/*#define HAL_SPDIFRX_MODULE_ENABLED */ +/*#define HAL_SPI_MODULE_ENABLED */ +/*#define HAL_SRAM_MODULE_ENABLED */ +#define HAL_TIM_MODULE_ENABLED +#define HAL_UART_MODULE_ENABLED +#define HAL_USART_MODULE_ENABLED +/*#define HAL_WWDG_MODULE_ENABLED */ +/*#define HAL_XSPI_MODULE_ENABLED */ +/*#define HAL_CACHEAXI_MODULE_ENABLED */ +/*#define HAL_MDIOS_MODULE_ENABLED */ +/*#define HAL_GPU2D_MODULE_ENABLED */ +/*#define HAL_CACHEAXI_MODULE_ENABLED */ +#define HAL_GPIO_MODULE_ENABLED +#define HAL_EXTI_MODULE_ENABLED +#define HAL_DMA_MODULE_ENABLED +#define HAL_RCC_MODULE_ENABLED +#define HAL_PWR_MODULE_ENABLED +#define HAL_CORTEX_MODULE_ENABLED + +/* ########################## Oscillator Values adaptation ####################*/ +/** + * @brief Adjust the value of External High Speed oscillator (HSE) used in your application. + * This value is used by the RCC HAL module to compute the system frequency + * (when HSE is used as system clock source, directly or through the PLL). + */ +#if !defined (HSE_VALUE) +#define HSE_VALUE 48000000UL /*!< Value of the External oscillator in Hz */ +#endif /* HSE_VALUE */ + +#if !defined (HSE_STARTUP_TIMEOUT) +#define HSE_STARTUP_TIMEOUT 100UL /*!< Time out for HSE start up, in ms */ +#endif /* HSE_STARTUP_TIMEOUT */ + +/** + * @brief External Low Speed oscillator (LSE) value. + * This value is used by the UART, RTC HAL module to compute the system frequency + */ +#if !defined (LSE_VALUE) +#define LSE_VALUE 32768UL /*!< Value of the External oscillator in Hz */ +#endif /* LSE_VALUE */ + +#if !defined (LSE_STARTUP_TIMEOUT) +#define LSE_STARTUP_TIMEOUT 5000UL /*!< Time out for LSE start up, in ms */ +#endif /* LSE_STARTUP_TIMEOUT */ + +/** + * @brief Internal Multiple Speed oscillator (MSI) default value. + * This value is the default MSI range value after Reset. + */ +#if !defined (MSI_VALUE) +#define MSI_VALUE 4000000UL /*!< Value of the Internal oscillator in Hz */ +#endif /* MSI_VALUE */ + +/** + * @brief Internal High Speed oscillator (HSI) value. + * This value is used by the RCC HAL module to compute the system frequency + * (when HSI is used as system clock source, directly or through the PLL). + */ +#if !defined (HSI_VALUE) +#define HSI_VALUE 64000000UL /*!< Value of the Internal oscillator in Hz */ +#endif /* HSI_VALUE */ + +/** + * @brief Internal Low Speed oscillator (LSI) value. + */ +#if !defined (LSI_VALUE) +#define LSI_VALUE 32000UL /*!< LSI Typical Value in Hz */ +#endif /* LSI_VALUE */ /*!< Value of the Internal Low Speed oscillator in Hz */ +/* The real value may vary depending on the variations in voltage and temperature.*/ + +/* Tip: To avoid modifying this file each time you need to use different HSE, + === you can define the HSE value in your toolchain compiler preprocessor. */ + +/* ########################### System Configuration ######################### */ +/** + * @brief This is the HAL system configuration section + */ +#define VDD_VALUE 3300UL /*!< Value of VDD in mv */ +#define TICK_INT_PRIORITY 15U /*!< tick interrupt priority (lowest by default) */ +#define USE_RTOS 0U + +/* ########################## Assert Selection ############################## */ +/** + * @brief Uncomment the line below to expanse the "assert_param" macro in the + * HAL drivers code + */ +/* #define USE_FULL_ASSERT 1U */ + +/* ################## Register callback feature configuration ############### */ +/** + * @brief Set below the peripheral configuration to "1U" to add the support + * of HAL callback registration/unregistration feature for the HAL + * driver(s). This allows user application to provide specific callback + * functions thanks to HAL_PPP_RegisterCallback() rather than overwriting + * the default weak callback functions (see each stm32n6xx_hal_ppp.h file + * for possible callback identifiers defined in HAL_PPP_CallbackIDTypeDef + * for each PPP peripheral). + */ +#define USE_HAL_ADC_REGISTER_CALLBACKS 0U /* ADC register callback disabled */ +#define USE_HAL_CACHEAXI_REGISTER_CALLBACKS 0U /* CACHEAXI register callback disabled */ +#define USE_HAL_CRYP_REGISTER_CALLBACKS 0U /* CRYP register callback disabled */ +#define USE_HAL_DCMI_REGISTER_CALLBACKS 0U /* DCMI register callback disabled */ +#define USE_HAL_DCMIPP_REGISTER_CALLBACKS 0U /* DCMIPP register callback disabled */ +#define USE_HAL_DMA2D_REGISTER_CALLBACKS 0U /* DMA2D register callback disabled */ +#define USE_HAL_DTS_REGISTER_CALLBACKS 0U /* DTS register callback disabled */ +#define USE_HAL_ETH_REGISTER_CALLBACKS 0U /* ETH register callback disabled */ +#define USE_HAL_FDCAN_REGISTER_CALLBACKS 0U /* FDCAN register callback disabled */ +#define USE_HAL_GFXMMU_REGISTER_CALLBACKS 0U /* GFXMMU register callback disabled */ +#define USE_HAL_GFXTIM_REGISTER_CALLBACKS 0U /* GFXTIM register callback disabled */ +#define USE_HAL_HASH_REGISTER_CALLBACKS 0U /* HASH register callback disabled */ +#define USE_HAL_HCD_REGISTER_CALLBACKS 0U /* HCD register callback disabled */ +#define USE_HAL_I2C_REGISTER_CALLBACKS 0U /* I2C register callback disabled */ +#define USE_HAL_I2S_REGISTER_CALLBACKS 0U /* I2S register callback disabled */ +#define USE_HAL_I3C_REGISTER_CALLBACKS 0U /* I3C register callback disabled */ +#define USE_HAL_IWDG_REGISTER_CALLBACKS 0U /* IWDG register callback disabled */ +#define USE_HAL_IRDA_REGISTER_CALLBACKS 0U /* IRDA register callback disabled */ +#define USE_HAL_LPTIM_REGISTER_CALLBACKS 0U /* LPTIM register callback disabled */ +#define USE_HAL_LTDC_REGISTER_CALLBACKS 0U /* LTDC register callback disabled */ +#define USE_HAL_MCE_REGISTER_CALLBACKS 0U /* MCE register callback disabled */ +#define USE_HAL_MDF_REGISTER_CALLBACKS 0U /* MDF register callback disabled */ +#define USE_HAL_MMC_REGISTER_CALLBACKS 0U /* MMC register callback disabled */ +#define USE_HAL_NAND_REGISTER_CALLBACKS 0U /* NAND register callback disabled */ +#define USE_HAL_NOR_REGISTER_CALLBACKS 0U /* NOR register callback disabled */ +#define USE_HAL_PCD_REGISTER_CALLBACKS 0U /* PCD register callback disabled */ +#define USE_HAL_PKA_REGISTER_CALLBACKS 0U /* PKA register callback disabled */ +#define USE_HAL_PSSI_REGISTER_CALLBACKS 0U /* PSSI register callback disabled */ +#define USE_HAL_RAMCFG_REGISTER_CALLBACKS 0U /* RAMCFG register callback disabled */ +#define USE_HAL_RNG_REGISTER_CALLBACKS 0U /* RNG register callback disabled */ +#define USE_HAL_RTC_REGISTER_CALLBACKS 0U /* RTC register callback disabled */ +#define USE_HAL_SAI_REGISTER_CALLBACKS 0U /* SAI register callback disabled */ +#define USE_HAL_SD_REGISTER_CALLBACKS 0U /* SD register callback disabled */ +#define USE_HAL_SDIO_REGISTER_CALLBACKS 0U /* SDIO register callback disabled */ +#define USE_HAL_SDRAM_REGISTER_CALLBACKS 0U /* SDRAM register callback disabled */ +#define USE_HAL_SMARTCARD_REGISTER_CALLBACKS 0U /* SMARTCARD register callback disabled */ +#define USE_HAL_SMBUS_REGISTER_CALLBACKS 0U /* SMBUS register callback disabled */ +#define USE_HAL_SPDIFRX_REGISTER_CALLBACKS 0U /* SPDIFRX register callback disabled */ +#define USE_HAL_SPI_REGISTER_CALLBACKS 0U /* SPI register callback disabled */ +#define USE_HAL_SRAM_REGISTER_CALLBACKS 0U /* SRAM register callback disabled */ +#define USE_HAL_TIM_REGISTER_CALLBACKS 0U /* TIM register callback disabled */ +#define USE_HAL_UART_REGISTER_CALLBACKS 0U /* UART register callback disabled */ +#define USE_HAL_USART_REGISTER_CALLBACKS 0U /* USART register callback disabled */ +#define USE_HAL_WWDG_REGISTER_CALLBACKS 0U /* WWDG register callback disabled */ +#define USE_HAL_XSPI_REGISTER_CALLBACKS 0U /* XSPI register callback disabled */ + +/* ################## SPI peripheral configuration ########################## */ + +/* CRC FEATURE: Use to activate CRC feature inside HAL SPI Driver + * Activated: CRC code is present inside driver + * Deactivated: CRC code cleaned from driver + */ +#define USE_SPI_CRC 0U + +/* ################## SDMMC peripheral configuration ######################### */ + +#define USE_SD_TRANSCEIVER 0U + +/* ################## SDIO peripheral configuration ########################## */ +#define USE_SDIO_TRANSCEIVER 1U +#define SDIO_MAX_IO_NUMBER 7U /*!< SDIO device support maximum IO number */ + +/* Includes ------------------------------------------------------------------*/ +/** + * @brief Include module's header file + */ +#ifdef HAL_RCC_MODULE_ENABLED +#include "stm32n6xx_hal_rcc.h" +#endif /* HAL_RCC_MODULE_ENABLED */ + +#ifdef HAL_GPIO_MODULE_ENABLED +#include "stm32n6xx_hal_gpio.h" +#endif /* HAL_GPIO_MODULE_ENABLED */ + +#ifdef HAL_RIF_MODULE_ENABLED +#include "stm32n6xx_hal_rif.h" +#endif /* HAL_RIF_MODULE_ENABLED */ + +#ifdef HAL_DMA_MODULE_ENABLED +#include "stm32n6xx_hal_dma.h" +#endif /* HAL_DMA_MODULE_ENABLED */ + +#ifdef HAL_CACHEAXI_MODULE_ENABLED +#include "stm32n6xx_hal_cacheaxi.h" +#endif /* HAL_CACHEAXI_MODULE_ENABLED */ + +#ifdef HAL_CORTEX_MODULE_ENABLED +#include "stm32n6xx_hal_cortex.h" +#endif /* HAL_CORTEX_MODULE_ENABLED */ + +#ifdef HAL_ADC_MODULE_ENABLED +#include "stm32n6xx_hal_adc.h" +#endif /* HAL_ADC_MODULE_ENABLED */ + +#ifdef HAL_BSEC_MODULE_ENABLED +#include "stm32n6xx_hal_bsec.h" +#endif /* HAL_BSEC_MODULE_ENABLED */ + +#ifdef HAL_CRC_MODULE_ENABLED +#include "stm32n6xx_hal_crc.h" +#endif /* HAL_CRC_MODULE_ENABLED */ + +#ifdef HAL_CRYP_MODULE_ENABLED +#include "stm32n6xx_hal_cryp.h" +#endif /* HAL_CRYP_MODULE_ENABLED */ + +#ifdef HAL_DCMI_MODULE_ENABLED +#include "stm32n6xx_hal_dcmi.h" +#endif /* HAL_DCMI_MODULE_ENABLED */ + +#ifdef HAL_DCMIPP_MODULE_ENABLED +#include "stm32n6xx_hal_dcmipp.h" +#endif /* HAL_DCMIPP_MODULE_ENABLED */ + +#ifdef HAL_DMA2D_MODULE_ENABLED +#include "stm32n6xx_hal_dma2d.h" +#endif /* HAL_DMA2D_MODULE_ENABLED */ + +#ifdef HAL_DTS_MODULE_ENABLED +#include "stm32n6xx_hal_dts.h" +#endif /* HAL_DTS_MODULE_ENABLED */ + +#ifdef HAL_ETH_MODULE_ENABLED +#include "stm32n6xx_hal_eth.h" +#endif /* HAL_ETH_MODULE_ENABLED */ + +#ifdef HAL_EXTI_MODULE_ENABLED +#include "stm32n6xx_hal_exti.h" +#endif /* HAL_EXTI_MODULE_ENABLED */ + +#ifdef HAL_FDCAN_MODULE_ENABLED +#include "stm32n6xx_hal_fdcan.h" +#endif /* HAL_FDCAN_MODULE_ENABLED */ + +#ifdef HAL_GFXMMU_MODULE_ENABLED +#include "stm32n6xx_hal_gfxmmu.h" +#endif /* HAL_GFXMMU_MODULE_ENABLED */ + +#ifdef HAL_GFXTIM_MODULE_ENABLED +#include "stm32n6xx_hal_gfxtim.h" +#endif /* HAL_GFXTIM_MODULE_ENABLED */ + +#ifdef HAL_GPIO_MODULE_ENABLED +#include "stm32n6xx_hal_gpio.h" +#endif /* HAL_GPIO_MODULE_ENABLED */ + +#ifdef HAL_GPU2D_MODULE_ENABLED +#include "stm32n6xx_hal_gpu2d.h" +#endif /* HAL_GPU2D_MODULE_ENABLED */ + +#ifdef HAL_HASH_MODULE_ENABLED +#include "stm32n6xx_hal_hash.h" +#endif /* HAL_HASH_MODULE_ENABLED */ + +#ifdef HAL_HCD_MODULE_ENABLED +#include "stm32n6xx_hal_hcd.h" +#endif /* HAL_HCD_MODULE_ENABLED */ + +#ifdef HAL_I2C_MODULE_ENABLED +#include "stm32n6xx_hal_i2c.h" +#endif /* HAL_I2C_MODULE_ENABLED */ + +#ifdef HAL_I2S_MODULE_ENABLED + #include "stm32n6xx_hal_i2s.h" +#endif /* HAL_I2S_MODULE_ENABLED */ + +#ifdef HAL_I3C_MODULE_ENABLED +#include "stm32n6xx_hal_i3c.h" +#endif /* HAL_I3C_MODULE_ENABLED */ + +#ifdef HAL_ICACHE_MODULE_ENABLED +#include "stm32n6xx_hal_icache.h" +#endif /* HAL_ICACHE_MODULE_ENABLED */ + +#ifdef HAL_IRDA_MODULE_ENABLED +#include "stm32n6xx_hal_irda.h" +#endif /* HAL_IRDA_MODULE_ENABLED */ + +#ifdef HAL_IWDG_MODULE_ENABLED +#include "stm32n6xx_hal_iwdg.h" +#endif /* HAL_IWDG_MODULE_ENABLED */ + +#ifdef HAL_JPEG_MODULE_ENABLED +#include "stm32n6xx_hal_jpeg.h" +#endif /* HAL_JPEG_MODULE_ENABLED */ + +#ifdef HAL_LPTIM_MODULE_ENABLED +#include "stm32n6xx_hal_lptim.h" +#endif /* HAL_LPTIM_MODULE_ENABLED */ + +#ifdef HAL_LTDC_MODULE_ENABLED +#include "stm32n6xx_hal_ltdc.h" +#endif /* HAL_LTDC_MODULE_ENABLED */ + +#ifdef HAL_MCE_MODULE_ENABLED +#include "stm32n6xx_hal_mce.h" +#endif /* HAL_MCE_MODULE_ENABLED */ + +#ifdef HAL_MDF_MODULE_ENABLED +#include "stm32n6xx_hal_mdf.h" +#endif /* HAL_MDF_MODULE_ENABLED */ + +#ifdef HAL_MDIOS_MODULE_ENABLED +#include "stm32n6xx_hal_mdios.h" +#endif /* HAL_MDIOS_MODULE_ENABLED */ + +#ifdef HAL_MMC_MODULE_ENABLED +#include "stm32n6xx_hal_mmc.h" +#endif /* HAL_MMC_MODULE_ENABLED */ + +#ifdef HAL_NAND_MODULE_ENABLED +#include "stm32n6xx_hal_nand.h" +#endif /* HAL_NAND_MODULE_ENABLED */ + +#ifdef HAL_NOR_MODULE_ENABLED +#include "stm32n6xx_hal_nor.h" +#endif /* HAL_NOR_MODULE_ENABLED */ + +#ifdef HAL_NAND_MODULE_ENABLED +#include "stm32n6xx_hal_nand.h" +#endif /* HAL_NAND_MODULE_ENABLED */ + +#ifdef HAL_PCD_MODULE_ENABLED +#include "stm32n6xx_hal_pcd.h" +#endif /* HAL_PCD_MODULE_ENABLED */ + +#ifdef HAL_PKA_MODULE_ENABLED +#include "stm32n6xx_hal_pka.h" +#endif /* HAL_PKA_MODULE_ENABLED */ + +#ifdef HAL_PSSI_MODULE_ENABLED +#include "stm32n6xx_hal_pssi.h" +#endif /* HAL_PSSI_MODULE_ENABLED */ + +#ifdef HAL_PWR_MODULE_ENABLED +#include "stm32n6xx_hal_pwr.h" +#endif /* HAL_PWR_MODULE_ENABLED */ + +#ifdef HAL_RAMCFG_MODULE_ENABLED +#include "stm32n6xx_hal_ramcfg.h" +#endif /* HAL_RAMCFG_MODULE_ENABLED */ + +#ifdef HAL_RNG_MODULE_ENABLED +#include "stm32n6xx_hal_rng.h" +#endif /* HAL_RNG_MODULE_ENABLED */ + +#ifdef HAL_RTC_MODULE_ENABLED +#include "stm32n6xx_hal_rtc.h" +#endif /* HAL_RTC_MODULE_ENABLED */ + +#ifdef HAL_SAI_MODULE_ENABLED +#include "stm32n6xx_hal_sai.h" +#endif /* HAL_SAI_MODULE_ENABLED */ + +#ifdef HAL_SD_MODULE_ENABLED +#include "stm32n6xx_hal_sd.h" +#endif /* HAL_SD_MODULE_ENABLED */ + +#ifdef HAL_SDIO_MODULE_ENABLED +#include "stm32n6xx_hal_sdio.h" +#endif /* HAL_SDIO_MODULE_ENABLED */ + +#ifdef HAL_SDRAM_MODULE_ENABLED +#include "stm32n6xx_hal_sdram.h" +#endif /* HAL_SDRAM_MODULE_ENABLED */ + +#ifdef HAL_SMARTCARD_MODULE_ENABLED +#include "stm32n6xx_hal_smartcard.h" +#endif /* HAL_SMARTCARD_MODULE_ENABLED */ + +#ifdef HAL_SMBUS_MODULE_ENABLED +#include "stm32n6xx_hal_smbus.h" +#endif /* HAL_SMBUS_MODULE_ENABLED */ + +#ifdef HAL_SPDIFRX_MODULE_ENABLED +#include "stm32n6xx_hal_spdifrx.h" +#endif /* HAL_SPDIFRX_MODULE_ENABLED */ + +#ifdef HAL_SPI_MODULE_ENABLED +#include "stm32n6xx_hal_spi.h" +#endif /* HAL_SPI_MODULE_ENABLED */ + +#ifdef HAL_SRAM_MODULE_ENABLED +#include "stm32n6xx_hal_sram.h" +#endif /* HAL_SRAM_MODULE_ENABLED */ + +#ifdef HAL_TIM_MODULE_ENABLED +#include "stm32n6xx_hal_tim.h" +#endif /* HAL_TIM_MODULE_ENABLED */ + +#ifdef HAL_UART_MODULE_ENABLED +#include "stm32n6xx_hal_uart.h" +#endif /* HAL_UART_MODULE_ENABLED */ + +#ifdef HAL_USART_MODULE_ENABLED +#include "stm32n6xx_hal_usart.h" +#endif /* HAL_USART_MODULE_ENABLED */ + +#ifdef HAL_WWDG_MODULE_ENABLED +#include "stm32n6xx_hal_wwdg.h" +#endif /* HAL_WWDG_MODULE_ENABLED */ + +#ifdef HAL_XSPI_MODULE_ENABLED +#include "stm32n6xx_hal_xspi.h" +#endif /* HAL_XSPI_MODULE_ENABLED */ + +/* Exported macros -----------------------------------------------------------*/ +#ifdef USE_FULL_ASSERT +/** + * @brief The assert_param macro is used for function's parameters check. + * @param expr: If expr is false, it calls assert_failed function + * which reports the name of the source file and the source + * line number of the call that failed. + * If expr is true, it returns no value. + * @retval None + */ +#define assert_param(expr) ((expr) ? (void)0U : assert_failed((uint8_t *)__FILE__, __LINE__)) +/* Exported functions ------------------------------------------------------- */ +void assert_failed(uint8_t *file, uint32_t line); +#else +#define assert_param(expr) ((void)0U) +#endif /* USE_FULL_ASSERT */ + +#ifdef __cplusplus +} +#endif + +#endif /* STM32N6xx_HAL_CONF_H */ diff --git a/hw/bsp/zephyr_board_aliases.cmake b/hw/bsp/zephyr_board_aliases.cmake index 91ffc3a39..b85ecec81 100644 --- a/hw/bsp/zephyr_board_aliases.cmake +++ b/hw/bsp/zephyr_board_aliases.cmake @@ -1 +1,2 @@ set(pca10056_BOARD_ALIAS nrf52840dk/nrf52840) +set(stm32n657nucleo_BOARD_ALIAS nucleo_n657x0_q) \ No newline at end of file diff --git a/src/common/tusb_mcu.h b/src/common/tusb_mcu.h index 6678265b5..027446a85 100644 --- a/src/common/tusb_mcu.h +++ b/src/common/tusb_mcu.h @@ -322,6 +322,15 @@ // MCU with on-chip HS Phy #define TUP_RHPORT_HIGHSPEED 1 +#elif TU_CHECK_MCU(OPT_MCU_STM32N6) + #define TUP_USBIP_DWC2 + #define TUP_USBIP_DWC2_STM32 + + #define TUP_DCD_ENDPOINT_MAX 9 + + // MCU with on-chip HS Phy + #define TUP_RHPORT_HIGHSPEED 2 + //--------------------------------------------------------------------+ // Sony //--------------------------------------------------------------------+ diff --git a/src/portable/synopsys/dwc2/dcd_dwc2.c b/src/portable/synopsys/dwc2/dcd_dwc2.c index 865c51894..5f86d6b76 100644 --- a/src/portable/synopsys/dwc2/dcd_dwc2.c +++ b/src/portable/synopsys/dwc2/dcd_dwc2.c @@ -425,6 +425,11 @@ bool dcd_init(uint8_t rhport, const tusb_rhport_init_t* rh_init) { // Clear A override, force B Valid dwc2->gotgctl = (dwc2->gotgctl & ~GOTGCTL_AVALOEN) | GOTGCTL_BVALOEN | GOTGCTL_BVALOVAL; +#if CFG_TUSB_MCU == OPT_MCU_STM32N6 + // No hardware detection of Vbus B-session is available on the STM32N6 + dwc2->stm32_gccfg |= STM32_GCCFG_VBVALOVAL; +#endif + // Enable required interrupts dwc2->gintmsk |= GINTMSK_OTGINT | GINTMSK_USBSUSPM | GINTMSK_USBRST | GINTMSK_ENUMDNEM | GINTMSK_WUIM; diff --git a/src/portable/synopsys/dwc2/dwc2_info.py b/src/portable/synopsys/dwc2/dwc2_info.py index 25edcf22d..38aa5656a 100755 --- a/src/portable/synopsys/dwc2/dwc2_info.py +++ b/src/portable/synopsys/dwc2/dwc2_info.py @@ -22,6 +22,7 @@ dwc2_reg_value = { 'ST H743/H750': [0x2300, 0x4F54330A, 0, 0x229FE190, 0x03B8D2E8, 0xE3F00030], 'ST L476 FS': [0x2000, 0x4F54310A, 0, 0x229ED520, 0x0200D1E8, 0x17F08030], 'ST U5A5 HS': [0x5000, 0x4F54411A, 0, 0x228FE052, 0x03B882E8, 0xE2103E30], + 'ST N6xx HS': [0x5000, 0x4F54411A, 0, 0x228FE052, 0x03B882E8, 0xE2103E30], 'XMC4500': [0xAEC000, 0x4F54292A, 0, 0x228F5930, 0x027A01E5, 0xDBF08030], 'GD32VF103': [0x1000, 0, 0, 0, 0, 0], } diff --git a/src/portable/synopsys/dwc2/dwc2_stm32.h b/src/portable/synopsys/dwc2/dwc2_stm32.h index c11c1eb05..0c1f835a9 100644 --- a/src/portable/synopsys/dwc2/dwc2_stm32.h +++ b/src/portable/synopsys/dwc2/dwc2_stm32.h @@ -77,6 +77,17 @@ extern "C" { #define EP_MAX_HS 9 #define EP_FIFO_SIZE_HS 4096 +#elif CFG_TUSB_MCU == OPT_MCU_STM32N6 + #include "stm32n6xx.h" + #define EP_MAX_FS 6 + #define EP_FIFO_SIZE_FS 1280 + + #define EP_MAX_HS 9 + #define EP_FIFO_SIZE_HS 4096 + + #define USB_OTG_HS_PERIPH_BASE USB1_OTG_HS_BASE + #define OTG_HS_IRQn USB1_OTG_HS_IRQn + #elif CFG_TUSB_MCU == OPT_MCU_STM32F7 #include "stm32f7xx.h" #define EP_MAX_FS 6 diff --git a/src/portable/synopsys/dwc2/hcd_dwc2.c b/src/portable/synopsys/dwc2/hcd_dwc2.c index 2de15068a..257fa2833 100644 --- a/src/portable/synopsys/dwc2/hcd_dwc2.c +++ b/src/portable/synopsys/dwc2/hcd_dwc2.c @@ -381,6 +381,10 @@ bool hcd_init(uint8_t rhport, const tusb_rhport_init_t* rh_init) { // force host mode and wait for mode switch dwc2->gusbcfg = (dwc2->gusbcfg & ~GUSBCFG_FDMOD) | GUSBCFG_FHMOD; +#if CFG_TUSB_MCU == OPT_MCU_STM32N6 + // No hardware detection of Vbus B-session is available on the STM32N6 + dwc2->stm32_gccfg &= ~STM32_GCCFG_VBVALOVAL; +#endif while ((dwc2->gintsts & GINTSTS_CMOD) != GINTSTS_CMODE_HOST) {} // configure fixed-allocated fifo scheme diff --git a/src/tusb_option.h b/src/tusb_option.h index 104f669c9..cca6096c6 100644 --- a/src/tusb_option.h +++ b/src/tusb_option.h @@ -94,6 +94,7 @@ #define OPT_MCU_STM32U0 316 ///< ST U0 #define OPT_MCU_STM32H7RS 317 ///< ST F7RS #define OPT_MCU_STM32C0 318 ///< ST C0 +#define OPT_MCU_STM32N6 319 ///< ST N6 // Sony #define OPT_MCU_CXD56 400 ///< SONY CXD56 diff --git a/tools/get_deps.py b/tools/get_deps.py index 1ce8be6c7..ab9d50585 100755 --- a/tools/get_deps.py +++ b/tools/get_deps.py @@ -118,6 +118,9 @@ deps_optional = { 'hw/mcu/st/cmsis_device_l5': ['https://github.com/STMicroelectronics/cmsis_device_l5.git', 'd922865fc0326a102c26211c44b8e42f52c1e53d', 'stm32l5'], + 'hw/mcu/st/cmsis_device_n6': ['https://github.com/STMicroelectronics/cmsis-device-n6.git', + 'f818b00f775444e8d19ef6cad822534c345e054f', + 'stm32n6'], 'hw/mcu/st/cmsis_device_u5': ['https://github.com/STMicroelectronics/cmsis_device_u5.git', '5ad9797c54ec3e55eff770fc9b3cd4a1aefc1309', 'stm32u5'], @@ -172,6 +175,9 @@ deps_optional = { 'hw/mcu/st/stm32l5xx_hal_driver': ['https://github.com/STMicroelectronics/stm32l5xx_hal_driver.git', '675c32a75df37f39d50d61f51cb0dcf53f07e1cb', 'stm32l5'], + 'hw/mcu/st/stm32n6xx_hal_driver': ['https://github.com/STMicroelectronics/stm32n6xx-hal-driver.git', + '49f9989d10cf6817d4b07ac01848956b46bd0fd6', + 'stm32n6'], 'hw/mcu/st/stm32u5xx_hal_driver': ['https://github.com/STMicroelectronics/stm32u5xx_hal_driver.git', '4d93097a67928e9377e655ddd14622adc31b9770', 'stm32u5'], @@ -198,7 +204,7 @@ deps_optional = { 'imxrt kinetis_k32l2 kinetis_kl lpc51 lpc54 lpc55 mcx mm32 msp432e4 nrf saml2x ' 'lpc11 lpc13 lpc15 lpc17 lpc18 lpc40 lpc43 ' 'stm32c0 stm32f0 stm32f1 stm32f2 stm32f3 stm32f4 stm32f7 stm32g0 stm32g4 stm32h5 ' - 'stm32h7 stm32l0 stm32l1 stm32l4 stm32l5 stm32u5 stm32wb ' + 'stm32h7 stm32l0 stm32l1 stm32l4 stm32l5 stm32n6 stm32u5 stm32wb ' 'sam3x samd11 samd21 samd51 samd5x_e5x same5x same7x saml2x samg ' 'tm4c '], 'lib/CMSIS_6': ['https://github.com/ARM-software/CMSIS_6.git', -- cgit v1.3.1 From 3cf7234d67f2cf3350cf0779a1ddd2e15e6a4b0e Mon Sep 17 00:00:00 2001 From: James Sandison Date: Wed, 4 Jun 2025 11:37:45 +1000 Subject: chore: whitespace fix --- hw/bsp/stm32n6/partition_stm32n657xx.h | 2 +- hw/mcu/st/cmsis_device_h7rs | 1 + hw/mcu/st/cmsis_device_n6 | 1 + hw/mcu/st/stm32h7rsxx_hal_driver | 1 + hw/mcu/st/stm32n6xx_hal_driver | 1 + lib/CMSIS_5 | 1 + lib/FreeRTOS-Kernel | 1 + lib/lwip | 1 + modules/crypto/mbedtls | 1 + modules/hal/cmsis | 1 + modules/hal/stm32 | 1 + tools/uf2 | 1 + zephyr | 1 + 13 files changed, 13 insertions(+), 1 deletion(-) create mode 160000 hw/mcu/st/cmsis_device_h7rs create mode 160000 hw/mcu/st/cmsis_device_n6 create mode 160000 hw/mcu/st/stm32h7rsxx_hal_driver create mode 160000 hw/mcu/st/stm32n6xx_hal_driver create mode 160000 lib/CMSIS_5 create mode 160000 lib/FreeRTOS-Kernel create mode 160000 lib/lwip create mode 160000 modules/crypto/mbedtls create mode 160000 modules/hal/cmsis create mode 160000 modules/hal/stm32 create mode 160000 tools/uf2 create mode 160000 zephyr (limited to 'tools') diff --git a/hw/bsp/stm32n6/partition_stm32n657xx.h b/hw/bsp/stm32n6/partition_stm32n657xx.h index 713068609..4efdc5668 100644 --- a/hw/bsp/stm32n6/partition_stm32n657xx.h +++ b/hw/bsp/stm32n6/partition_stm32n657xx.h @@ -785,7 +785,7 @@ __STATIC_INLINE void TZ_SAU_Setup (void) #if defined (NVIC_INIT_ITNS6) && (NVIC_INIT_ITNS6 == 1U) NVIC->ITNS[6] = NVIC_INIT_ITNS6_VAL; - #endif + #endif } diff --git a/hw/mcu/st/cmsis_device_h7rs b/hw/mcu/st/cmsis_device_h7rs new file mode 160000 index 000000000..832649d1f --- /dev/null +++ b/hw/mcu/st/cmsis_device_h7rs @@ -0,0 +1 @@ +Subproject commit 832649d1fd09bd901e9f68e979522e5c209ebf20 diff --git a/hw/mcu/st/cmsis_device_n6 b/hw/mcu/st/cmsis_device_n6 new file mode 160000 index 000000000..f818b00f7 --- /dev/null +++ b/hw/mcu/st/cmsis_device_n6 @@ -0,0 +1 @@ +Subproject commit f818b00f775444e8d19ef6cad822534c345e054f diff --git a/hw/mcu/st/stm32h7rsxx_hal_driver b/hw/mcu/st/stm32h7rsxx_hal_driver new file mode 160000 index 000000000..7ca2e07ca --- /dev/null +++ b/hw/mcu/st/stm32h7rsxx_hal_driver @@ -0,0 +1 @@ +Subproject commit 7ca2e07ca21bc66b53654e845b4c85c884343b60 diff --git a/hw/mcu/st/stm32n6xx_hal_driver b/hw/mcu/st/stm32n6xx_hal_driver new file mode 160000 index 000000000..49f9989d1 --- /dev/null +++ b/hw/mcu/st/stm32n6xx_hal_driver @@ -0,0 +1 @@ +Subproject commit 49f9989d10cf6817d4b07ac01848956b46bd0fd6 diff --git a/lib/CMSIS_5 b/lib/CMSIS_5 new file mode 160000 index 000000000..2b7495b85 --- /dev/null +++ b/lib/CMSIS_5 @@ -0,0 +1 @@ +Subproject commit 2b7495b8535bdcb306dac29b9ded4cfb679d7e5c diff --git a/lib/FreeRTOS-Kernel b/lib/FreeRTOS-Kernel new file mode 160000 index 000000000..cc0e0707c --- /dev/null +++ b/lib/FreeRTOS-Kernel @@ -0,0 +1 @@ +Subproject commit cc0e0707c0c748713485b870bb980852b210877f diff --git a/lib/lwip b/lib/lwip new file mode 160000 index 000000000..159e31b68 --- /dev/null +++ b/lib/lwip @@ -0,0 +1 @@ +Subproject commit 159e31b689577dbf69cf0683bbaffbd71fa5ee10 diff --git a/modules/crypto/mbedtls b/modules/crypto/mbedtls new file mode 160000 index 000000000..5f8899343 --- /dev/null +++ b/modules/crypto/mbedtls @@ -0,0 +1 @@ +Subproject commit 5f889934359deccf421554c7045a8381ef75298f diff --git a/modules/hal/cmsis b/modules/hal/cmsis new file mode 160000 index 000000000..d1b8b20b6 --- /dev/null +++ b/modules/hal/cmsis @@ -0,0 +1 @@ +Subproject commit d1b8b20b6278615b00e136374540eb1c00dcabe7 diff --git a/modules/hal/stm32 b/modules/hal/stm32 new file mode 160000 index 000000000..5cbc642b1 --- /dev/null +++ b/modules/hal/stm32 @@ -0,0 +1 @@ +Subproject commit 5cbc642b1a79d4f373b1587f8c3027f31bf0d30c diff --git a/tools/uf2 b/tools/uf2 new file mode 160000 index 000000000..c594542b2 --- /dev/null +++ b/tools/uf2 @@ -0,0 +1 @@ +Subproject commit c594542b2faa01cc33a2b97c9fbebc38549df80a diff --git a/zephyr b/zephyr new file mode 160000 index 000000000..c2c1495b4 --- /dev/null +++ b/zephyr @@ -0,0 +1 @@ +Subproject commit c2c1495b4c523a679a57e7b72891c02a34351f43 -- cgit v1.3.1 From efc8c08a66517054f38213be2e191ea60ac04333 Mon Sep 17 00:00:00 2001 From: James Sandison Date: Wed, 4 Jun 2025 11:42:21 +1000 Subject: chore: delete accidentally commited submodules --- hw/mcu/st/cmsis_device_h7rs | 1 - hw/mcu/st/cmsis_device_n6 | 1 - hw/mcu/st/stm32h7rsxx_hal_driver | 1 - hw/mcu/st/stm32n6xx_hal_driver | 1 - lib/CMSIS_5 | 1 - lib/FreeRTOS-Kernel | 1 - lib/lwip | 1 - modules/crypto/mbedtls | 1 - modules/hal/cmsis | 1 - modules/hal/stm32 | 1 - tools/uf2 | 1 - zephyr | 1 - 12 files changed, 12 deletions(-) delete mode 160000 hw/mcu/st/cmsis_device_h7rs delete mode 160000 hw/mcu/st/cmsis_device_n6 delete mode 160000 hw/mcu/st/stm32h7rsxx_hal_driver delete mode 160000 hw/mcu/st/stm32n6xx_hal_driver delete mode 160000 lib/CMSIS_5 delete mode 160000 lib/FreeRTOS-Kernel delete mode 160000 lib/lwip delete mode 160000 modules/crypto/mbedtls delete mode 160000 modules/hal/cmsis delete mode 160000 modules/hal/stm32 delete mode 160000 tools/uf2 delete mode 160000 zephyr (limited to 'tools') diff --git a/hw/mcu/st/cmsis_device_h7rs b/hw/mcu/st/cmsis_device_h7rs deleted file mode 160000 index 832649d1f..000000000 --- a/hw/mcu/st/cmsis_device_h7rs +++ /dev/null @@ -1 +0,0 @@ -Subproject commit 832649d1fd09bd901e9f68e979522e5c209ebf20 diff --git a/hw/mcu/st/cmsis_device_n6 b/hw/mcu/st/cmsis_device_n6 deleted file mode 160000 index f818b00f7..000000000 --- a/hw/mcu/st/cmsis_device_n6 +++ /dev/null @@ -1 +0,0 @@ -Subproject commit f818b00f775444e8d19ef6cad822534c345e054f diff --git a/hw/mcu/st/stm32h7rsxx_hal_driver b/hw/mcu/st/stm32h7rsxx_hal_driver deleted file mode 160000 index 7ca2e07ca..000000000 --- a/hw/mcu/st/stm32h7rsxx_hal_driver +++ /dev/null @@ -1 +0,0 @@ -Subproject commit 7ca2e07ca21bc66b53654e845b4c85c884343b60 diff --git a/hw/mcu/st/stm32n6xx_hal_driver b/hw/mcu/st/stm32n6xx_hal_driver deleted file mode 160000 index 49f9989d1..000000000 --- a/hw/mcu/st/stm32n6xx_hal_driver +++ /dev/null @@ -1 +0,0 @@ -Subproject commit 49f9989d10cf6817d4b07ac01848956b46bd0fd6 diff --git a/lib/CMSIS_5 b/lib/CMSIS_5 deleted file mode 160000 index 2b7495b85..000000000 --- a/lib/CMSIS_5 +++ /dev/null @@ -1 +0,0 @@ -Subproject commit 2b7495b8535bdcb306dac29b9ded4cfb679d7e5c diff --git a/lib/FreeRTOS-Kernel b/lib/FreeRTOS-Kernel deleted file mode 160000 index cc0e0707c..000000000 --- a/lib/FreeRTOS-Kernel +++ /dev/null @@ -1 +0,0 @@ -Subproject commit cc0e0707c0c748713485b870bb980852b210877f diff --git a/lib/lwip b/lib/lwip deleted file mode 160000 index 159e31b68..000000000 --- a/lib/lwip +++ /dev/null @@ -1 +0,0 @@ -Subproject commit 159e31b689577dbf69cf0683bbaffbd71fa5ee10 diff --git a/modules/crypto/mbedtls b/modules/crypto/mbedtls deleted file mode 160000 index 5f8899343..000000000 --- a/modules/crypto/mbedtls +++ /dev/null @@ -1 +0,0 @@ -Subproject commit 5f889934359deccf421554c7045a8381ef75298f diff --git a/modules/hal/cmsis b/modules/hal/cmsis deleted file mode 160000 index d1b8b20b6..000000000 --- a/modules/hal/cmsis +++ /dev/null @@ -1 +0,0 @@ -Subproject commit d1b8b20b6278615b00e136374540eb1c00dcabe7 diff --git a/modules/hal/stm32 b/modules/hal/stm32 deleted file mode 160000 index 5cbc642b1..000000000 --- a/modules/hal/stm32 +++ /dev/null @@ -1 +0,0 @@ -Subproject commit 5cbc642b1a79d4f373b1587f8c3027f31bf0d30c diff --git a/tools/uf2 b/tools/uf2 deleted file mode 160000 index c594542b2..000000000 --- a/tools/uf2 +++ /dev/null @@ -1 +0,0 @@ -Subproject commit c594542b2faa01cc33a2b97c9fbebc38549df80a diff --git a/zephyr b/zephyr deleted file mode 160000 index c2c1495b4..000000000 --- a/zephyr +++ /dev/null @@ -1 +0,0 @@ -Subproject commit c2c1495b4c523a679a57e7b72891c02a34351f43 -- cgit v1.3.1 From b56265f38182b71e39179a88ddaeca4786e6b780 Mon Sep 17 00:00:00 2001 From: hathach Date: Tue, 10 Jun 2025 22:28:03 +0700 Subject: merge all maxim (32650, 32666, 32690, 78002) family into common bsp/maxim. Only support cmake build system rename hw/mcu/analog/max32 to hw/mcu/analog/msdk --- .github/workflows/ci_set_matrix.py | 2 +- hw/bsp/espressif/family.cmake | 2 - hw/bsp/family_support.cmake | 16 +- hw/bsp/max32650/FreeRTOSConfig/FreeRTOSConfig.h | 149 ---------------- hw/bsp/max32650/README.md | 46 ----- hw/bsp/max32650/boards/max32650evkit/board.cmake | 10 -- hw/bsp/max32650/boards/max32650evkit/board.h | 61 ------- hw/bsp/max32650/boards/max32650evkit/board.mk | 2 - hw/bsp/max32650/boards/max32650evkit/max32650.ld | 119 ------------- hw/bsp/max32650/boards/max32650fthr/board.cmake | 10 -- hw/bsp/max32650/boards/max32650fthr/board.h | 62 ------- hw/bsp/max32650/boards/max32650fthr/board.mk | 2 - hw/bsp/max32650/boards/max32650fthr/max32650.ld | 119 ------------- hw/bsp/max32650/boards/max32651evkit/board.cmake | 30 ---- hw/bsp/max32650/boards/max32651evkit/board.h | 61 ------- hw/bsp/max32650/boards/max32651evkit/board.mk | 5 - hw/bsp/max32650/boards/max32651evkit/max32651.ld | 132 -------------- hw/bsp/max32650/family.c | 177 ------------------- hw/bsp/max32650/family.cmake | 169 ------------------ hw/bsp/max32650/family.mk | 140 --------------- hw/bsp/max32666/FreeRTOSConfig/FreeRTOSConfig.h | 149 ---------------- hw/bsp/max32666/README.md | 32 ---- hw/bsp/max32666/boards/max32666evkit/board.cmake | 1 - hw/bsp/max32666/boards/max32666evkit/board.h | 62 ------- hw/bsp/max32666/boards/max32666evkit/board.mk | 1 - hw/bsp/max32666/boards/max32666fthr/board.cmake | 1 - hw/bsp/max32666/boards/max32666fthr/board.h | 62 ------- hw/bsp/max32666/boards/max32666fthr/board.mk | 1 - hw/bsp/max32666/family.c | 177 ------------------- hw/bsp/max32666/family.cmake | 147 ---------------- hw/bsp/max32666/family.mk | 93 ---------- hw/bsp/max32666/max32666.ld | 135 -------------- hw/bsp/max32690/FreeRTOSConfig/FreeRTOSConfig.h | 149 ---------------- hw/bsp/max32690/README.md | 31 ---- hw/bsp/max32690/boards/apard32690/board.cmake | 1 - hw/bsp/max32690/boards/apard32690/board.h | 61 ------- hw/bsp/max32690/boards/apard32690/board.mk | 1 - hw/bsp/max32690/boards/max32690evkit/board.cmake | 1 - hw/bsp/max32690/boards/max32690evkit/board.h | 61 ------- hw/bsp/max32690/boards/max32690evkit/board.mk | 1 - hw/bsp/max32690/family.c | 175 ------------------- hw/bsp/max32690/family.cmake | 152 ---------------- hw/bsp/max32690/family.mk | 101 ----------- hw/bsp/max32690/max32690.ld | 164 ----------------- hw/bsp/max78002/FreeRTOSConfig/FreeRTOSConfig.h | 149 ---------------- hw/bsp/max78002/README.md | 28 --- hw/bsp/max78002/boards/max78002evkit/board.cmake | 1 - hw/bsp/max78002/boards/max78002evkit/board.h | 63 ------- hw/bsp/max78002/boards/max78002evkit/board.mk | 1 - hw/bsp/max78002/family.c | 173 ------------------ hw/bsp/max78002/family.cmake | 166 ------------------ hw/bsp/max78002/family.mk | 99 ----------- hw/bsp/max78002/max78002.ld | 182 ------------------- hw/bsp/maxim/FreeRTOSConfig/FreeRTOSConfig.h | 149 ++++++++++++++++ hw/bsp/maxim/README.md | 43 +++++ hw/bsp/maxim/boards/apard32690/board.cmake | 4 + hw/bsp/maxim/boards/apard32690/board.h | 61 +++++++ hw/bsp/maxim/boards/max32650evkit/board.cmake | 8 + hw/bsp/maxim/boards/max32650evkit/board.h | 61 +++++++ hw/bsp/maxim/boards/max32650fthr/board.cmake | 8 + hw/bsp/maxim/boards/max32650fthr/board.h | 62 +++++++ hw/bsp/maxim/boards/max32651evkit/board.cmake | 31 ++++ hw/bsp/maxim/boards/max32651evkit/board.h | 61 +++++++ hw/bsp/maxim/boards/max32666evkit/board.cmake | 4 + hw/bsp/maxim/boards/max32666evkit/board.h | 62 +++++++ hw/bsp/maxim/boards/max32666fthr/board.cmake | 4 + hw/bsp/maxim/boards/max32666fthr/board.h | 62 +++++++ hw/bsp/maxim/boards/max32690evkit/board.cmake | 4 + hw/bsp/maxim/boards/max32690evkit/board.h | 61 +++++++ hw/bsp/maxim/boards/max78002evkit/board.cmake | 4 + hw/bsp/maxim/boards/max78002evkit/board.h | 63 +++++++ hw/bsp/maxim/family.c | 213 +++++++++++++++++++++++ hw/bsp/maxim/family.cmake | 205 ++++++++++++++++++++++ hw/bsp/maxim/linker/max32650.ld | 119 +++++++++++++ hw/bsp/maxim/linker/max32651.ld | 132 ++++++++++++++ hw/bsp/maxim/linker/max32665.ld | 135 ++++++++++++++ hw/bsp/maxim/linker/max32690.ld | 164 +++++++++++++++++ hw/bsp/maxim/linker/max78002.ld | 182 +++++++++++++++++++ tools/get_deps.py | 4 +- 79 files changed, 1916 insertions(+), 3925 deletions(-) delete mode 100644 hw/bsp/max32650/FreeRTOSConfig/FreeRTOSConfig.h delete mode 100644 hw/bsp/max32650/README.md delete mode 100644 hw/bsp/max32650/boards/max32650evkit/board.cmake delete mode 100644 hw/bsp/max32650/boards/max32650evkit/board.h delete mode 100644 hw/bsp/max32650/boards/max32650evkit/board.mk delete mode 100644 hw/bsp/max32650/boards/max32650evkit/max32650.ld delete mode 100644 hw/bsp/max32650/boards/max32650fthr/board.cmake delete mode 100644 hw/bsp/max32650/boards/max32650fthr/board.h delete mode 100644 hw/bsp/max32650/boards/max32650fthr/board.mk delete mode 100644 hw/bsp/max32650/boards/max32650fthr/max32650.ld delete mode 100644 hw/bsp/max32650/boards/max32651evkit/board.cmake delete mode 100644 hw/bsp/max32650/boards/max32651evkit/board.h delete mode 100644 hw/bsp/max32650/boards/max32651evkit/board.mk delete mode 100644 hw/bsp/max32650/boards/max32651evkit/max32651.ld delete mode 100644 hw/bsp/max32650/family.c delete mode 100644 hw/bsp/max32650/family.cmake delete mode 100644 hw/bsp/max32650/family.mk delete mode 100644 hw/bsp/max32666/FreeRTOSConfig/FreeRTOSConfig.h delete mode 100644 hw/bsp/max32666/README.md delete mode 100644 hw/bsp/max32666/boards/max32666evkit/board.cmake delete mode 100644 hw/bsp/max32666/boards/max32666evkit/board.h delete mode 100644 hw/bsp/max32666/boards/max32666evkit/board.mk delete mode 100644 hw/bsp/max32666/boards/max32666fthr/board.cmake delete mode 100644 hw/bsp/max32666/boards/max32666fthr/board.h delete mode 100644 hw/bsp/max32666/boards/max32666fthr/board.mk delete mode 100644 hw/bsp/max32666/family.c delete mode 100644 hw/bsp/max32666/family.cmake delete mode 100644 hw/bsp/max32666/family.mk delete mode 100644 hw/bsp/max32666/max32666.ld delete mode 100644 hw/bsp/max32690/FreeRTOSConfig/FreeRTOSConfig.h delete mode 100644 hw/bsp/max32690/README.md delete mode 100644 hw/bsp/max32690/boards/apard32690/board.cmake delete mode 100644 hw/bsp/max32690/boards/apard32690/board.h delete mode 100644 hw/bsp/max32690/boards/apard32690/board.mk delete mode 100644 hw/bsp/max32690/boards/max32690evkit/board.cmake delete mode 100644 hw/bsp/max32690/boards/max32690evkit/board.h delete mode 100644 hw/bsp/max32690/boards/max32690evkit/board.mk delete mode 100644 hw/bsp/max32690/family.c delete mode 100644 hw/bsp/max32690/family.cmake delete mode 100644 hw/bsp/max32690/family.mk delete mode 100644 hw/bsp/max32690/max32690.ld delete mode 100644 hw/bsp/max78002/FreeRTOSConfig/FreeRTOSConfig.h delete mode 100644 hw/bsp/max78002/README.md delete mode 100644 hw/bsp/max78002/boards/max78002evkit/board.cmake delete mode 100644 hw/bsp/max78002/boards/max78002evkit/board.h delete mode 100644 hw/bsp/max78002/boards/max78002evkit/board.mk delete mode 100644 hw/bsp/max78002/family.c delete mode 100644 hw/bsp/max78002/family.cmake delete mode 100644 hw/bsp/max78002/family.mk delete mode 100644 hw/bsp/max78002/max78002.ld create mode 100644 hw/bsp/maxim/FreeRTOSConfig/FreeRTOSConfig.h create mode 100644 hw/bsp/maxim/README.md create mode 100644 hw/bsp/maxim/boards/apard32690/board.cmake create mode 100644 hw/bsp/maxim/boards/apard32690/board.h create mode 100644 hw/bsp/maxim/boards/max32650evkit/board.cmake create mode 100644 hw/bsp/maxim/boards/max32650evkit/board.h create mode 100644 hw/bsp/maxim/boards/max32650fthr/board.cmake create mode 100644 hw/bsp/maxim/boards/max32650fthr/board.h create mode 100644 hw/bsp/maxim/boards/max32651evkit/board.cmake create mode 100644 hw/bsp/maxim/boards/max32651evkit/board.h create mode 100644 hw/bsp/maxim/boards/max32666evkit/board.cmake create mode 100644 hw/bsp/maxim/boards/max32666evkit/board.h create mode 100644 hw/bsp/maxim/boards/max32666fthr/board.cmake create mode 100644 hw/bsp/maxim/boards/max32666fthr/board.h create mode 100644 hw/bsp/maxim/boards/max32690evkit/board.cmake create mode 100644 hw/bsp/maxim/boards/max32690evkit/board.h create mode 100644 hw/bsp/maxim/boards/max78002evkit/board.cmake create mode 100644 hw/bsp/maxim/boards/max78002evkit/board.h create mode 100644 hw/bsp/maxim/family.c create mode 100644 hw/bsp/maxim/family.cmake create mode 100644 hw/bsp/maxim/linker/max32650.ld create mode 100644 hw/bsp/maxim/linker/max32651.ld create mode 100644 hw/bsp/maxim/linker/max32665.ld create mode 100644 hw/bsp/maxim/linker/max32690.ld create mode 100644 hw/bsp/maxim/linker/max78002.ld (limited to 'tools') diff --git a/.github/workflows/ci_set_matrix.py b/.github/workflows/ci_set_matrix.py index fa73dc1b6..bccb07e3e 100755 --- a/.github/workflows/ci_set_matrix.py +++ b/.github/workflows/ci_set_matrix.py @@ -24,7 +24,7 @@ family_list = { "lpc11 lpc13 lpc15": ["arm-gcc", "arm-clang"], "lpc17 lpc18 lpc40 lpc43": ["arm-gcc", "arm-clang"], "lpc51 lpc54 lpc55": ["arm-gcc", "arm-clang"], - "max32650 max32666 max32690 max78002": ["arm-gcc"], + "maxim": ["arm-gcc"], "mcx": ["arm-gcc"], "mm32": ["arm-gcc"], "msp430": ["msp430-gcc"], diff --git a/hw/bsp/espressif/family.cmake b/hw/bsp/espressif/family.cmake index b544689d9..2aad7d185 100644 --- a/hw/bsp/espressif/family.cmake +++ b/hw/bsp/espressif/family.cmake @@ -32,8 +32,6 @@ endif () # Add example src and bsp directories set(EXTRA_COMPONENT_DIRS "src" "${CMAKE_CURRENT_LIST_DIR}/boards" "${CMAKE_CURRENT_LIST_DIR}/components") - -# set SDKCONFIG for each IDF Target set(SDKCONFIG ${CMAKE_BINARY_DIR}/sdkconfig) include($ENV{IDF_PATH}/tools/cmake/project.cmake) diff --git a/hw/bsp/family_support.cmake b/hw/bsp/family_support.cmake index 3a6890690..ac1276f7d 100644 --- a/hw/bsp/family_support.cmake +++ b/hw/bsp/family_support.cmake @@ -482,7 +482,7 @@ function(family_flash_openocd TARGET) # note skip verify since it has issue with rp2040 add_custom_target(${TARGET}-openocd DEPENDS ${TARGET} - COMMAND ${OPENOCD} -c "tcl_port disabled" -c "gdb_port disabled" ${OPTION_LIST} -c init -c halt -c "program $" -c reset ${OPTION_LIST2} -c exit + COMMAND ${OPENOCD} -c "tcl_port disabled; gdb_port disabled" ${OPTION_LIST} -c "init; halt; program $" -c reset ${OPTION_LIST2} -c exit VERBATIM ) endfunction() @@ -502,10 +502,16 @@ endfunction() # Add flash openocd adi (Analog Devices) target # included with msdk or compiled from release branch of https://github.com/analogdevicesinc/openocd function(family_flash_openocd_adi TARGET) - if (DEFINED $ENV{MAXIM_PATH}) - # use openocd from msdk - set(OPENOCD ENV{MAXIM_PATH}/Tools/OpenOCD/openocd) - set(OPENOCD_OPTION2 "-s ENV{MAXIM_PATH}/Tools/OpenOCD/scripts") + if (DEFINED MAXIM_PATH) + # use openocd from msdk with MAXIM_PATH cmake variable first if the user specified it + set(OPENOCD ${MAXIM_PATH}/Tools/OpenOCD/openocd) + set(OPENOCD_OPTION2 "-s ${MAXIM_PATH}/Tools/OpenOCD/scripts") + elseif (DEFINED ENV{MAXIM_PATH}) + # use openocd from msdk with MAXIM_PATH environment variable. Normalize + # since msdk can be Windows (MinGW) or Linux + file(TO_CMAKE_PATH "$ENV{MAXIM_PATH}" MAXIM_PATH_NORM) + set(OPENOCD ${MAXIM_PATH_NORM}/Tools/OpenOCD/openocd) + set(OPENOCD_OPTION2 "-s ${MAXIM_PATH_NORM}/Tools/OpenOCD/scripts") else() # compiled from source if (NOT DEFINED OPENOCD_ADI_PATH) diff --git a/hw/bsp/max32650/FreeRTOSConfig/FreeRTOSConfig.h b/hw/bsp/max32650/FreeRTOSConfig/FreeRTOSConfig.h deleted file mode 100644 index e5a76af85..000000000 --- a/hw/bsp/max32650/FreeRTOSConfig/FreeRTOSConfig.h +++ /dev/null @@ -1,149 +0,0 @@ -/* - * FreeRTOS Kernel V10.0.0 - * Copyright (C) 2017 Amazon.com, Inc. or its affiliates. All Rights Reserved. - * - * Permission is hereby granted, free of charge, to any person obtaining a copy of - * this software and associated documentation files (the "Software"), to deal in - * the Software without restriction, including without limitation the rights to - * use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of - * the Software, and to permit persons to whom the Software is furnished to do so, - * subject to the following conditions: - * - * The above copyright notice and this permission notice shall be included in all - * copies or substantial portions of the Software. If you wish to use our Amazon - * FreeRTOS name, please do so in a fair use way that does not cause confusion. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR - * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS - * FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR - * COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER - * IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN - * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. - * - * http://www.FreeRTOS.org - * http://aws.amazon.com/freertos - * - * 1 tab == 4 spaces! - */ - - -#ifndef FREERTOS_CONFIG_H -#define FREERTOS_CONFIG_H - -/*----------------------------------------------------------- - * Application specific definitions. - * - * These definitions should be adjusted for your particular hardware and - * application requirements. - * - * THESE PARAMETERS ARE DESCRIBED WITHIN THE 'CONFIGURATION' SECTION OF THE - * FreeRTOS API DOCUMENTATION AVAILABLE ON THE FreeRTOS.org WEB SITE. - * - * See http://www.freertos.org/a00110.html. - *----------------------------------------------------------*/ - -// skip if included from IAR assembler -#ifndef __IASMARM__ - #include "mxc_device.h" -#endif - -/* Cortex M23/M33 port configuration. */ -#define configENABLE_MPU 0 -#define configENABLE_FPU 1 -#define configENABLE_TRUSTZONE 0 -#define configMINIMAL_SECURE_STACK_SIZE (1024) - -#define configUSE_PREEMPTION 1 -#define configUSE_PORT_OPTIMISED_TASK_SELECTION 0 -#define configCPU_CLOCK_HZ SystemCoreClock -#define configTICK_RATE_HZ ( 1000 ) -#define configMAX_PRIORITIES ( 5 ) -#define configMINIMAL_STACK_SIZE ( 128 ) -#define configTOTAL_HEAP_SIZE ( configSUPPORT_DYNAMIC_ALLOCATION*4*1024 ) -#define configMAX_TASK_NAME_LEN 16 -#define configUSE_16_BIT_TICKS 0 -#define configIDLE_SHOULD_YIELD 1 -#define configUSE_MUTEXES 1 -#define configUSE_RECURSIVE_MUTEXES 1 -#define configUSE_COUNTING_SEMAPHORES 1 -#define configQUEUE_REGISTRY_SIZE 4 -#define configUSE_QUEUE_SETS 0 -#define configUSE_TIME_SLICING 0 -#define configUSE_NEWLIB_REENTRANT 0 -#define configENABLE_BACKWARD_COMPATIBILITY 1 -#define configSTACK_ALLOCATION_FROM_SEPARATE_HEAP 0 - -#define configSUPPORT_STATIC_ALLOCATION 1 -#define configSUPPORT_DYNAMIC_ALLOCATION 0 - -/* Hook function related definitions. */ -#define configUSE_IDLE_HOOK 0 -#define configUSE_TICK_HOOK 0 -#define configUSE_MALLOC_FAILED_HOOK 0 // cause nested extern warning -#define configCHECK_FOR_STACK_OVERFLOW 2 -#define configCHECK_HANDLER_INSTALLATION 0 - -/* Run time and task stats gathering related definitions. */ -#define configGENERATE_RUN_TIME_STATS 0 -#define configRECORD_STACK_HIGH_ADDRESS 1 -#define configUSE_TRACE_FACILITY 1 // legacy trace -#define configUSE_STATS_FORMATTING_FUNCTIONS 0 - -/* Co-routine definitions. */ -#define configUSE_CO_ROUTINES 0 -#define configMAX_CO_ROUTINE_PRIORITIES 2 - -/* Software timer related definitions. */ -#define configUSE_TIMERS 1 -#define configTIMER_TASK_PRIORITY (configMAX_PRIORITIES-2) -#define configTIMER_QUEUE_LENGTH 32 -#define configTIMER_TASK_STACK_DEPTH configMINIMAL_STACK_SIZE - -/* Optional functions - most linkers will remove unused functions anyway. */ -#define INCLUDE_vTaskPrioritySet 0 -#define INCLUDE_uxTaskPriorityGet 0 -#define INCLUDE_vTaskDelete 0 -#define INCLUDE_vTaskSuspend 1 // required for queue, semaphore, mutex to be blocked indefinitely with portMAX_DELAY -#define INCLUDE_xResumeFromISR 0 -#define INCLUDE_vTaskDelayUntil 1 -#define INCLUDE_vTaskDelay 1 -#define INCLUDE_xTaskGetSchedulerState 0 -#define INCLUDE_xTaskGetCurrentTaskHandle 1 -#define INCLUDE_uxTaskGetStackHighWaterMark 0 -#define INCLUDE_xTaskGetIdleTaskHandle 0 -#define INCLUDE_xTimerGetTimerDaemonTaskHandle 0 -#define INCLUDE_pcTaskGetTaskName 0 -#define INCLUDE_eTaskGetState 0 -#define INCLUDE_xEventGroupSetBitFromISR 0 -#define INCLUDE_xTimerPendFunctionCall 0 - -/* FreeRTOS hooks to NVIC vectors */ -#define xPortPendSVHandler PendSV_Handler -#define xPortSysTickHandler SysTick_Handler -#define vPortSVCHandler SVC_Handler - -//--------------------------------------------------------------------+ -// Interrupt nesting behavior configuration. -//--------------------------------------------------------------------+ - -// For Cortex-M specific: __NVIC_PRIO_BITS is defined in mcu header -#define configPRIO_BITS __NVIC_PRIO_BITS - -/* The lowest interrupt priority that can be used in a call to a "set priority" function. */ -#define configLIBRARY_LOWEST_INTERRUPT_PRIORITY ((1<-jlink` target for CMake. - -Both the Evaluation Kit and Feather boards are shipped with a CMSIS-DAP -compatible debug probe. However, at the time of writing, the necessary flashing -algorithms for OpenOCD have not yet been incorporated into the OpenOCD master -branch. To utilize the provided debug probes, please install the bundled MSDK -package which includes the appropriate OpenOCD modifications. To leverage this -OpenOCD instance, run the `flash-msdk` Makefile rule, or `-msdk` CMake -target. - -### MAX32651 - -The MAX32651 features an integrated secure bootloader which requires the -application image be signed prior to flashing. Both the Makefile and CMake -scripts account for this signing automatically when building for the -MAX32651EVKIT. - -To flash the signed image, the MSDK's OpenOCD variant must be used. To flash -the MAX32651EVKIT please install the bundled MSDK, and utilize the `flash-msdk` -and `-msdk` rule and target. diff --git a/hw/bsp/max32650/boards/max32650evkit/board.cmake b/hw/bsp/max32650/boards/max32650evkit/board.cmake deleted file mode 100644 index fffdcc9fb..000000000 --- a/hw/bsp/max32650/boards/max32650evkit/board.cmake +++ /dev/null @@ -1,10 +0,0 @@ -# Use the standard, non-secure linker file -set(LD_FILE_GNU ${CMAKE_CURRENT_LIST_DIR}/max32650.ld) - -function(update_board_extras TARGET) - #No extra arguments -endfunction() - -function(prepare_image TARGET_IN) - #No signing required -endfunction() diff --git a/hw/bsp/max32650/boards/max32650evkit/board.h b/hw/bsp/max32650/boards/max32650evkit/board.h deleted file mode 100644 index 65ed2659e..000000000 --- a/hw/bsp/max32650/boards/max32650evkit/board.h +++ /dev/null @@ -1,61 +0,0 @@ -/* - * The MIT License (MIT) - * - * Copyright (c) 2024, Brent Kowal (Analog Devices, Inc) - * - * Permission is hereby granted, free of charge, to any person obtaining a copy - * of this software and associated documentation files (the "Software"), to deal - * in the Software without restriction, including without limitation the rights - * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell - * copies of the Software, and to permit persons to whom the Software is - * furnished to do so, subject to the following conditions: - * - * The above copyright notice and this permission notice shall be included in - * all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR - * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, - * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE - * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER - * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, - * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN - * THE SOFTWARE. - * - * This file is part of the TinyUSB stack. - */ - -/* metadata: - name: MAX32650 EVKIT - url: https://www.analog.com/en/resources/evaluation-hardware-and-software/evaluation-boards-kits/max32650-evkit.html#eb-overview -*/ - -#ifndef BOARD_H_ -#define BOARD_H_ - -#include "gpio.h" -#include "mxc_sys.h" - -#ifdef __cplusplus -extern "C" { -#endif - -// LED -#define LED_PORT MXC_GPIO2 -#define LED_PIN MXC_GPIO_PIN_25 -#define LED_VDDIO MXC_GPIO_VSSEL_VDDIOH -#define LED_STATE_ON 0 - -// Button -#define BUTTON_PORT MXC_GPIO2 -#define BUTTON_PIN MXC_GPIO_PIN_28 -#define BUTTON_PULL MXC_GPIO_PAD_WEAK_PULL_UP -#define BUTTON_STATE_ACTIVE 0 - -// UART Enable for EvKit's Integrated FTDI Adapter. Pin Mux handled by the HAL -#define UART_NUM 0 - -#ifdef __cplusplus -} -#endif - -#endif /* BOARD_H_ */ diff --git a/hw/bsp/max32650/boards/max32650evkit/board.mk b/hw/bsp/max32650/boards/max32650evkit/board.mk deleted file mode 100644 index 0bc210e11..000000000 --- a/hw/bsp/max32650/boards/max32650evkit/board.mk +++ /dev/null @@ -1,2 +0,0 @@ -# Use the standard, non-secure linker file -LD_FILE = $(BOARD_PATH)/max32650.ld diff --git a/hw/bsp/max32650/boards/max32650evkit/max32650.ld b/hw/bsp/max32650/boards/max32650evkit/max32650.ld deleted file mode 100644 index 0e56a91ec..000000000 --- a/hw/bsp/max32650/boards/max32650evkit/max32650.ld +++ /dev/null @@ -1,119 +0,0 @@ -MEMORY { - ROM (rx) : ORIGIN = 0x00000000, LENGTH = 0x00010000 /* 64kB ROM */ - FLASH (rx) : ORIGIN = 0x10000000, LENGTH = 0x00300000 /* 3MB flash */ - SRAM (rwx) : ORIGIN = 0x20000000, LENGTH = 0x00100000 /* 1MB SRAM */ -} - -SECTIONS { - .text : - { - _text = .; - KEEP(*(.isr_vector)) - *(.text*) /* program code */ - *(.rodata*) /* read-only data: "const" */ - - KEEP(*(.init)) - KEEP(*(.fini)) - - /* .ctors */ - *crtbegin.o(.ctors) - *crtbegin?.o(.ctors) - *(EXCLUDE_FILE(*crtend?.o *crtend.o) .ctors) - *(SORT(.ctors.*)) - *(.ctors) - - /* .dtors */ - *crtbegin.o(.dtors) - *crtbegin?.o(.dtors) - *(EXCLUDE_FILE(*crtend?.o *crtend.o) .dtors) - *(SORT(.dtors.*)) - *(.dtors) - - /* C++ Exception handling */ - KEEP(*(.eh_frame*)) - _etext = .; - } > FLASH - - .ARM.extab : - { - *(.ARM.extab* .gnu.linkonce.armextab.*) - } > FLASH - - /* it's used for C++ exception handling */ - /* we need to keep this to avoid overlapping */ - .ARM.exidx : - { - __exidx_start = .; - *(.ARM.exidx* .gnu.linkonce.armexidx.*) - __exidx_end = .; - } > FLASH - - .data : - { - _data = ALIGN(., 4); - *(vtable) - *(.data*) /*read-write initialized data: initialized global variable*/ - *(.spix_config*) /* SPIX configuration functions need to be run from SRAM */ - *(.flashprog*) /* Flash program */ - - - /* These array sections are used by __libc_init_array to call static C++ constructors */ - . = ALIGN(4); - /* preinit data */ - PROVIDE_HIDDEN (__preinit_array_start = .); - KEEP(*(.preinit_array)) - PROVIDE_HIDDEN (__preinit_array_end = .); - - . = ALIGN(4); - /* init data */ - PROVIDE_HIDDEN (__init_array_start = .); - KEEP(*(SORT(.init_array.*))) - KEEP(*(.init_array)) - PROVIDE_HIDDEN (__init_array_end = .); - - . = ALIGN(4); - /* finit data */ - PROVIDE_HIDDEN (__fini_array_start = .); - KEEP(*(SORT(.fini_array.*))) - KEEP(*(.fini_array)) - PROVIDE_HIDDEN (__fini_array_end = .); - - _edata = ALIGN(., 4); - } > SRAM AT>FLASH - __load_data = LOADADDR(.data); - .bss : - { - . = ALIGN(4); - _bss = .; - *(.bss*) /*read-write zero initialized data: uninitialized global variable*/ - *(COMMON) - _ebss = ALIGN(., 4); - } > SRAM - - /* Set stack top to end of RAM, and stack limit move down by - * size of stack_dummy section */ - __StackTop = ORIGIN(SRAM) + LENGTH(SRAM); - __StackLimit = __StackTop - SIZEOF(.stack_dummy); - - /* .stack_dummy section doesn't contains any symbols. It is only - * used for linker to calculate size of stack sections, and assign - * values to stack symbols later */ - .stack_dummy (COPY): - { - *(.stack*) - } > SRAM - - .heap (COPY): - { - . = ALIGN(4); - PROVIDE ( end = . ); - PROVIDE ( _end = . ); - *(.heap*) - __HeapLimit = ABSOLUTE(__StackLimit); - } > SRAM - - PROVIDE(__stack = __StackTop); - - /* Check if data + heap + stack exceeds RAM limit */ - ASSERT(__StackLimit >= _ebss, "region RAM overflowed with stack") -} diff --git a/hw/bsp/max32650/boards/max32650fthr/board.cmake b/hw/bsp/max32650/boards/max32650fthr/board.cmake deleted file mode 100644 index fffdcc9fb..000000000 --- a/hw/bsp/max32650/boards/max32650fthr/board.cmake +++ /dev/null @@ -1,10 +0,0 @@ -# Use the standard, non-secure linker file -set(LD_FILE_GNU ${CMAKE_CURRENT_LIST_DIR}/max32650.ld) - -function(update_board_extras TARGET) - #No extra arguments -endfunction() - -function(prepare_image TARGET_IN) - #No signing required -endfunction() diff --git a/hw/bsp/max32650/boards/max32650fthr/board.h b/hw/bsp/max32650/boards/max32650fthr/board.h deleted file mode 100644 index 755fa15b5..000000000 --- a/hw/bsp/max32650/boards/max32650fthr/board.h +++ /dev/null @@ -1,62 +0,0 @@ -/* - * The MIT License (MIT) - * - * Copyright (c) 2024, Brent Kowal (Analog Devices, Inc) - * - * Permission is hereby granted, free of charge, to any person obtaining a copy - * of this software and associated documentation files (the "Software"), to deal - * in the Software without restriction, including without limitation the rights - * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell - * copies of the Software, and to permit persons to whom the Software is - * furnished to do so, subject to the following conditions: - * - * The above copyright notice and this permission notice shall be included in - * all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR - * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, - * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE - * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER - * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, - * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN - * THE SOFTWARE. - * - * This file is part of the TinyUSB stack. - */ - -/* metadata: - name: MAX32650 Feather - url: https://www.analog.com/en/resources/evaluation-hardware-and-software/evaluation-boards-kits/max32650fthr.html -*/ - -#ifndef BOARD_H_ -#define BOARD_H_ - -#include "gpio.h" -#include "mxc_sys.h" - -#ifdef __cplusplus -extern "C" { -#endif - -// LED -#define LED_PORT MXC_GPIO1 -#define LED_PIN MXC_GPIO_PIN_14 -#define LED_VDDIO MXC_GPIO_VSSEL_VDDIO -#define LED_STATE_ON 0 - -// Button -#define BUTTON_PORT MXC_GPIO1 -#define BUTTON_PIN MXC_GPIO_PIN_19 -#define BUTTON_PULL MXC_GPIO_PAD_WEAK_PULL_UP -#define BUTTON_STATE_ACTIVE 0 - -// UART Enable for SWD UART Pins. Pin Mux handled by the HAL -#define UART_NUM 0 - - -#ifdef __cplusplus -} -#endif - -#endif /* BOARD_H_ */ diff --git a/hw/bsp/max32650/boards/max32650fthr/board.mk b/hw/bsp/max32650/boards/max32650fthr/board.mk deleted file mode 100644 index 0bc210e11..000000000 --- a/hw/bsp/max32650/boards/max32650fthr/board.mk +++ /dev/null @@ -1,2 +0,0 @@ -# Use the standard, non-secure linker file -LD_FILE = $(BOARD_PATH)/max32650.ld diff --git a/hw/bsp/max32650/boards/max32650fthr/max32650.ld b/hw/bsp/max32650/boards/max32650fthr/max32650.ld deleted file mode 100644 index 0e56a91ec..000000000 --- a/hw/bsp/max32650/boards/max32650fthr/max32650.ld +++ /dev/null @@ -1,119 +0,0 @@ -MEMORY { - ROM (rx) : ORIGIN = 0x00000000, LENGTH = 0x00010000 /* 64kB ROM */ - FLASH (rx) : ORIGIN = 0x10000000, LENGTH = 0x00300000 /* 3MB flash */ - SRAM (rwx) : ORIGIN = 0x20000000, LENGTH = 0x00100000 /* 1MB SRAM */ -} - -SECTIONS { - .text : - { - _text = .; - KEEP(*(.isr_vector)) - *(.text*) /* program code */ - *(.rodata*) /* read-only data: "const" */ - - KEEP(*(.init)) - KEEP(*(.fini)) - - /* .ctors */ - *crtbegin.o(.ctors) - *crtbegin?.o(.ctors) - *(EXCLUDE_FILE(*crtend?.o *crtend.o) .ctors) - *(SORT(.ctors.*)) - *(.ctors) - - /* .dtors */ - *crtbegin.o(.dtors) - *crtbegin?.o(.dtors) - *(EXCLUDE_FILE(*crtend?.o *crtend.o) .dtors) - *(SORT(.dtors.*)) - *(.dtors) - - /* C++ Exception handling */ - KEEP(*(.eh_frame*)) - _etext = .; - } > FLASH - - .ARM.extab : - { - *(.ARM.extab* .gnu.linkonce.armextab.*) - } > FLASH - - /* it's used for C++ exception handling */ - /* we need to keep this to avoid overlapping */ - .ARM.exidx : - { - __exidx_start = .; - *(.ARM.exidx* .gnu.linkonce.armexidx.*) - __exidx_end = .; - } > FLASH - - .data : - { - _data = ALIGN(., 4); - *(vtable) - *(.data*) /*read-write initialized data: initialized global variable*/ - *(.spix_config*) /* SPIX configuration functions need to be run from SRAM */ - *(.flashprog*) /* Flash program */ - - - /* These array sections are used by __libc_init_array to call static C++ constructors */ - . = ALIGN(4); - /* preinit data */ - PROVIDE_HIDDEN (__preinit_array_start = .); - KEEP(*(.preinit_array)) - PROVIDE_HIDDEN (__preinit_array_end = .); - - . = ALIGN(4); - /* init data */ - PROVIDE_HIDDEN (__init_array_start = .); - KEEP(*(SORT(.init_array.*))) - KEEP(*(.init_array)) - PROVIDE_HIDDEN (__init_array_end = .); - - . = ALIGN(4); - /* finit data */ - PROVIDE_HIDDEN (__fini_array_start = .); - KEEP(*(SORT(.fini_array.*))) - KEEP(*(.fini_array)) - PROVIDE_HIDDEN (__fini_array_end = .); - - _edata = ALIGN(., 4); - } > SRAM AT>FLASH - __load_data = LOADADDR(.data); - .bss : - { - . = ALIGN(4); - _bss = .; - *(.bss*) /*read-write zero initialized data: uninitialized global variable*/ - *(COMMON) - _ebss = ALIGN(., 4); - } > SRAM - - /* Set stack top to end of RAM, and stack limit move down by - * size of stack_dummy section */ - __StackTop = ORIGIN(SRAM) + LENGTH(SRAM); - __StackLimit = __StackTop - SIZEOF(.stack_dummy); - - /* .stack_dummy section doesn't contains any symbols. It is only - * used for linker to calculate size of stack sections, and assign - * values to stack symbols later */ - .stack_dummy (COPY): - { - *(.stack*) - } > SRAM - - .heap (COPY): - { - . = ALIGN(4); - PROVIDE ( end = . ); - PROVIDE ( _end = . ); - *(.heap*) - __HeapLimit = ABSOLUTE(__StackLimit); - } > SRAM - - PROVIDE(__stack = __StackTop); - - /* Check if data + heap + stack exceeds RAM limit */ - ASSERT(__StackLimit >= _ebss, "region RAM overflowed with stack") -} diff --git a/hw/bsp/max32650/boards/max32651evkit/board.cmake b/hw/bsp/max32650/boards/max32651evkit/board.cmake deleted file mode 100644 index bd8077a42..000000000 --- a/hw/bsp/max32650/boards/max32651evkit/board.cmake +++ /dev/null @@ -1,30 +0,0 @@ -# Use the secure linker file -set(LD_FILE_GNU ${CMAKE_CURRENT_LIST_DIR}/max32651.ld) - -function(update_board_extras TARGET) - # for the signed target, need to add the __SLA_FWK__ define - target_compile_definitions(${TARGET} PUBLIC - __SLA_FWK__ - ) -endfunction() - -function(prepare_image TARGET_IN) - #For the signed target, set up a POST_BUILD command to sign the elf file once - #created - if((WIN32) OR (MINGW) OR (MSYS)) - set(SIGN_EXE "sign_app.exe") - else() - set(SIGN_EXE "sign_app") - endif() - set(MCU_PATH "${TOP}/hw/mcu/analog/max32/") - - # Custom POST_BUILD command - add_custom_command( - TARGET ${TARGET_IN} POST_BUILD - COMMAND ${CMAKE_OBJCOPY} $ -R .sig -O binary $/${TARGET_IN}.bin - COMMAND ${MCU_PATH}/Tools/SBT/bin/${SIGN_EXE} -c MAX32651 key_file=${MCU_PATH}/Tools/SBT/devices/MAX32651/keys/maximtestcrk.key - ca=$/${TARGET_IN}.bin sca=$/${TARGET_IN}.sbin - COMMAND ${CMAKE_OBJCOPY} $ --update-section .sig=$/${TARGET_IN}.sig - VERBATIM - ) -endfunction() diff --git a/hw/bsp/max32650/boards/max32651evkit/board.h b/hw/bsp/max32650/boards/max32651evkit/board.h deleted file mode 100644 index 0b49ff309..000000000 --- a/hw/bsp/max32650/boards/max32651evkit/board.h +++ /dev/null @@ -1,61 +0,0 @@ -/* - * The MIT License (MIT) - * - * Copyright (c) 2024, Brent Kowal (Analog Devices, Inc) - * - * Permission is hereby granted, free of charge, to any person obtaining a copy - * of this software and associated documentation files (the "Software"), to deal - * in the Software without restriction, including without limitation the rights - * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell - * copies of the Software, and to permit persons to whom the Software is - * furnished to do so, subject to the following conditions: - * - * The above copyright notice and this permission notice shall be included in - * all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR - * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, - * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE - * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER - * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, - * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN - * THE SOFTWARE. - * - * This file is part of the TinyUSB stack. - */ - -/* metadata: - name: MAX32651 EVKIT - url: https://www.analog.com/en/resources/evaluation-hardware-and-software/evaluation-boards-kits/max32651-evkit.html -*/ - -#ifndef BOARD_H_ -#define BOARD_H_ - -#include "gpio.h" -#include "mxc_sys.h" - -#ifdef __cplusplus -extern "C" { -#endif - -// LED -#define LED_PORT MXC_GPIO2 -#define LED_PIN MXC_GPIO_PIN_25 -#define LED_VDDIO MXC_GPIO_VSSEL_VDDIOH -#define LED_STATE_ON 0 - -// Button -#define BUTTON_PORT MXC_GPIO2 -#define BUTTON_PIN MXC_GPIO_PIN_28 -#define BUTTON_PULL MXC_GPIO_PAD_WEAK_PULL_UP -#define BUTTON_STATE_ACTIVE 0 - -// UART Enable for EvKit's Integrated FTDI Adapter. Pin Mux handled by the HAL -#define UART_NUM 0 - -#ifdef __cplusplus -} -#endif - -#endif /* BOARD_H_ */ diff --git a/hw/bsp/max32650/boards/max32651evkit/board.mk b/hw/bsp/max32650/boards/max32651evkit/board.mk deleted file mode 100644 index b609598c1..000000000 --- a/hw/bsp/max32650/boards/max32651evkit/board.mk +++ /dev/null @@ -1,5 +0,0 @@ -# Use the secure linker file -LD_FILE = $(BOARD_PATH)/max32651.ld - -# Let the family script know the build needs to be signed -SIGNED_BUILD := 1 diff --git a/hw/bsp/max32650/boards/max32651evkit/max32651.ld b/hw/bsp/max32650/boards/max32651evkit/max32651.ld deleted file mode 100644 index 3921d10f2..000000000 --- a/hw/bsp/max32650/boards/max32651evkit/max32651.ld +++ /dev/null @@ -1,132 +0,0 @@ -MEMORY { - HEADER (rx): ORIGIN = 0x10000000, LENGTH = 0x200 - FLASH (rx) : ORIGIN = 0x10000200, LENGTH = 0x002FFE00 /* 3MB flash */ - SRAM (rwx) : ORIGIN = 0x20000000, LENGTH = 0x00100000 /* 1MB SRAM */ -} - -/* Added Oct 9, 2018 to go to correct reset vector. */ -ENTRY(Reset_Handler) -PROVIDE( _start_SWAP = (((Reset_Handler) >> 24) | (((Reset_Handler) & 0x00FF0000) >> 8) | (((Reset_Handler) & 0x0000FF00) << 8) | ((Reset_Handler) << 24))); -PROVIDE_HIDDEN( _SLA_Size = _endimage - __end_header ); -PROVIDE( _SLA_Size_SWAP = (((_SLA_Size) >> 24) | (((_SLA_Size) & 0x00FF0000) >> 8) | (((_SLA_Size) & 0x0000FF00) << 8) | ((_SLA_Size) << 24))); - -/* Sections Definitions */ -SECTIONS { - .sb_sla_header : ALIGN(4) - { - FILL(0xFF) - KEEP(*(.sb_sla_header)) /* Header for ROM code */ - __end_header = . ; - . = ALIGN(512); - } > HEADER - - .text : - { - _text = .; - KEEP(*(.isr_vector)) - *(.text*) /* program code */ - *(.rodata*) /* read-only data: "const" */ - - KEEP(*(.init)) - KEEP(*(.fini)) - - /* C++ Exception handling */ - KEEP(*(.eh_frame*)) - _etext = .; - } > FLASH - - /* it's used for C++ exception handling */ - /* we need to keep this to avoid overlapping */ - .ARM.exidx : - { - __exidx_start = .; - *(.ARM.exidx*) - __exidx_end = .; - } > FLASH - - .data : - { - _data = ALIGN(., 4); - *(.data*) /*read-write initialized data: initialized global variable*/ - *(.spix_config*) /* SPIX configuration functions need to be run from SRAM */ - *(.flashprog*) /* Flash program */ - - - /* These array sections are used by __libc_init_array to call static C++ constructors */ - . = ALIGN(4); - /* preinit data */ - PROVIDE_HIDDEN (__preinit_array_start = .); - KEEP(*(.preinit_array)) - PROVIDE_HIDDEN (__preinit_array_end = .); - - . = ALIGN(4); - /* init data */ - PROVIDE_HIDDEN (__init_array_start = .); - KEEP(*(SORT(.init_array.*))) - KEEP(*(.init_array)) - PROVIDE_HIDDEN (__init_array_end = .); - - . = ALIGN(4); - /* finit data */ - PROVIDE_HIDDEN (__fini_array_start = .); - KEEP(*(SORT(.fini_array.*))) - KEEP(*(.fini_array)) - PROVIDE_HIDDEN (__fini_array_end = .); - - _edata = ALIGN(., 4); - } > SRAM AT>FLASH - __load_data = LOADADDR(.data); - _enddata = LOADADDR(.data)+SIZEOF(.data); - - .sb_sla_trailer : AT(_enddata) - { - KEEP(*(.sb_sla_trailer)) - /* Align image with 16 byte boundary to conform to flash encryption block size. */ - FILL(0xDEADC0DE); - /* NOTE: The FILL and ALIGN will not work unless something is written to the section. So, we use LONG. */ - LONG(0xDEADC0DE); - . = ALIGN(16); - } > FLASH - _endimage = LOADADDR(.sb_sla_trailer)+SIZEOF(.sb_sla_trailer); - .sig : - { - KEEP(*(.sig)) - LONG(0xDEADBEEF); - - } > FLASH - .bss : - { - . = ALIGN(4); - _bss = .; - *(.bss*) /*read-write zero initialized data: uninitialized global variable*/ - *(COMMON) - _ebss = ALIGN(., 4); - } > SRAM - - /* Set stack top to end of RAM, and stack limit move down by - * size of stack_dummy section */ - __StackTop = ORIGIN(SRAM) + LENGTH(SRAM); - __StackLimit = __StackTop - SIZEOF(.stack_dummy); - - /* .stack_dummy section doesn't contains any symbols. It is only - * used for linker to calculate size of stack sections, and assign - * values to stack symbols later */ - .stack_dummy (COPY): - { - *(.stack*) - } > SRAM - - .heap (COPY): - { - . = ALIGN(4); - PROVIDE ( end = . ); - PROVIDE ( _end = . ); - *(.heap*) - __HeapLimit = ABSOLUTE(__StackLimit); - } > SRAM - - PROVIDE(__stack = __StackTop); - - /* Check if data + heap + stack exceeds RAM limit */ - ASSERT(__StackLimit >= _ebss, "region RAM overflowed with stack") -} diff --git a/hw/bsp/max32650/family.c b/hw/bsp/max32650/family.c deleted file mode 100644 index 8f0e56734..000000000 --- a/hw/bsp/max32650/family.c +++ /dev/null @@ -1,177 +0,0 @@ -/* - * The MIT License (MIT) - * - * Copyright (c) 2024 Brent Kowal (Analog Devices, Inc) - * - * Permission is hereby granted, free of charge, to any person obtaining a copy - * of this software and associated documentation files (the "Software"), to deal - * in the Software without restriction, including without limitation the rights - * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell - * copies of the Software, and to permit persons to whom the Software is - * furnished to do so, subject to the following conditions: - * - * The above copyright notice and this permission notice shall be included in - * all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR - * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, - * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE - * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER - * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, - * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN - * THE SOFTWARE. - * - * This file is part of the TinyUSB stack. - */ - -/* metadata: - manufacturer: Analog Devices -*/ - -#ifdef __GNUC__ -#pragma GCC diagnostic push -#pragma GCC diagnostic ignored "-Wstrict-prototypes" // _mxc_crit_get_state() -#endif - -#include "gpio.h" -#include "mxc_sys.h" -#include "mxc_device.h" -#include "uart.h" - -#ifdef __GNUC__ -#pragma GCC diagnostic pop -#endif - -#include "board.h" -#include "bsp/board_api.h" - - -//--------------------------------------------------------------------+ -// Forward USB interrupt events to TinyUSB IRQ Handler -//--------------------------------------------------------------------+ -void USB_IRQHandler(void) { - tud_int_handler(0); -} - -//--------------------------------------------------------------------+ -// MACRO TYPEDEF CONSTANT ENUM -//--------------------------------------------------------------------+ -mxc_uart_regs_t *ConsoleUart = MXC_UART_GET_UART(UART_NUM); - -void board_init(void) { -#if CFG_TUSB_OS == OPT_OS_NONE - // 1ms tick timer - SysTick_Config(SystemCoreClock / 1000); -#elif CFG_TUSB_OS == OPT_OS_FREERTOS - // If freeRTOS is used, IRQ priority is limit by max syscall ( smaller is higher ) - NVIC_SetPriority(USB_IRQn, configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY); -#endif - mxc_gpio_cfg_t gpioConfig; - - // LED - gpioConfig.drvstr = MXC_GPIO_DRVSTR_0; - gpioConfig.func = MXC_GPIO_FUNC_OUT; - gpioConfig.mask = LED_PIN; - gpioConfig.pad = MXC_GPIO_PAD_NONE; - gpioConfig.port = LED_PORT; - gpioConfig.vssel = LED_VDDIO; - MXC_GPIO_Config(&gpioConfig); - board_led_write(false); - - // Button - gpioConfig.drvstr = MXC_GPIO_DRVSTR_0; - gpioConfig.func = MXC_GPIO_FUNC_IN; - gpioConfig.mask = BUTTON_PIN; - gpioConfig.pad = BUTTON_PULL; - gpioConfig.port = BUTTON_PORT; - gpioConfig.vssel = MXC_GPIO_VSSEL_VDDIO; - MXC_GPIO_Config(&gpioConfig); - - // UART - MXC_UART_Init(ConsoleUart, CFG_BOARD_UART_BAUDRATE); - - //USB - // Startup the HIRC96M clock if it's not on already - if (!(MXC_GCR->clk_ctrl & MXC_F_GCR_CLK_CTRL_HIRC96_EN)) { - MXC_GCR->clk_ctrl |= MXC_F_GCR_CLK_CTRL_HIRC96_EN; - MXC_SYS_Clock_Timeout(MXC_F_GCR_CLK_CTRL_HIRC96_RDY); - } - - MXC_SYS_ClockEnable(MXC_SYS_PERIPH_CLOCK_USB); - MXC_SYS_Reset_Periph(MXC_SYS_RESET_USB); -} - -//--------------------------------------------------------------------+ -// Board porting API -//--------------------------------------------------------------------+ - -void board_led_write(bool state) { -#if LED_STATE_ON - state = !state; -#endif - if (state) { - MXC_GPIO_OutClr(LED_PORT, LED_PIN); - } else { - MXC_GPIO_OutSet(LED_PORT, LED_PIN); - } -} - -uint32_t board_button_read(void) { - uint32_t state = MXC_GPIO_InGet(BUTTON_PORT, BUTTON_PIN) ? 1 : 0; - return BUTTON_STATE_ACTIVE == state; -} - -size_t board_get_unique_id(uint8_t id[], size_t max_len) { - uint8_t hw_id[13];//USN Buffer - MXC_SYS_GetUSN(hw_id, 13); - - size_t act_len = TU_MIN(max_len, 13); - memcpy(id, hw_id, act_len); - return act_len; -} - -int board_uart_read(uint8_t *buf, int len) { - int uart_val; - int act_len = 0; - - while (act_len < len) { - if ((uart_val = MXC_UART_ReadCharacterRaw(ConsoleUart)) == E_UNDERFLOW) { - break; - } else { - *buf++ = (uint8_t) uart_val; - act_len++; - } - } - return act_len; -} - -int board_uart_write(void const *buf, int len) { - int act_len = 0; - const uint8_t *ch_ptr = (const uint8_t *) buf; - while (act_len < len) { - MXC_UART_WriteCharacter(ConsoleUart, *ch_ptr++); - act_len++; - } - return len; -} - -#if CFG_TUSB_OS == OPT_OS_NONE -volatile uint32_t system_ticks = 0; - -void SysTick_Handler(void) { - system_ticks++; -} - -uint32_t board_millis(void) { - return system_ticks; -} -#endif - -void HardFault_Handler(void) { - __asm("BKPT #0\n"); -} - -// Required by __libc_init_array in startup code if we are compiling using -// -nostdlib/-nostartfiles. -void _init(void) { -} diff --git a/hw/bsp/max32650/family.cmake b/hw/bsp/max32650/family.cmake deleted file mode 100644 index b1d5dded7..000000000 --- a/hw/bsp/max32650/family.cmake +++ /dev/null @@ -1,169 +0,0 @@ -include_guard() - -set(MAX32_PERIPH ${TOP}/hw/mcu/analog/max32/Libraries/PeriphDrivers) -set(MAX32_CMSIS ${TOP}/hw/mcu/analog/max32/Libraries/CMSIS) -set(CMSIS_5 ${TOP}/lib/CMSIS_5) - -# include board specific information and functions -include(${CMAKE_CURRENT_LIST_DIR}/boards/${BOARD}/board.cmake) - -# Get the linker file -set(LD_FILE_Clang ${LD_FILE_GNU}) - -# toolchain set up -set(CMAKE_SYSTEM_CPU cortex-m4 CACHE INTERNAL "System Processor") -set(CMAKE_TOOLCHAIN_FILE ${TOP}/examples/build_system/cmake/toolchain/arm_${TOOLCHAIN}.cmake) -set(JLINK_DEVICE max32650) -set(OPENOCD_OPTION "-f interface/cmsis-dap.cfg -f target/max32650.cfg") - -set(FAMILY_MCUS MAX32650 CACHE INTERNAL "") - -function(update_board TARGET) - target_compile_definitions(${TARGET} PUBLIC - TARGET=MAX32650 - TARGET_REV=0x4131 - MXC_ASSERT_ENABLE - MAX32650 - IAR_PRAGMAS=0 - CFG_TUSB_MCU=OPT_MCU_MAX32650 - BOARD_TUD_MAX_SPEED=OPT_MODE_HIGH_SPEED - ) - - # Run any board specific updates - update_board_extras(${TARGET}) -endfunction() - -#------------------------------------ -# BOARD_TARGET -#------------------------------------ -# only need to be built ONCE for all examples -function(add_board_target BOARD_TARGET) - if (TARGET ${BOARD_TARGET}) - return() - endif () - - # Startup & Linker script - set(STARTUP_FILE_GNU ${MAX32_CMSIS}/Device/Maxim/MAX32650/Source/GCC/startup_max32650.S) - set(STARTUP_FILE_Clang ${STARTUP_FILE_GNU}) - - set(PERIPH_SRC ${MAX32_PERIPH}/Source) - add_library(${BOARD_TARGET} STATIC - ${MAX32_CMSIS}/Device/Maxim/MAX32650/Source/heap.c - ${MAX32_CMSIS}/Device/Maxim/MAX32650/Source/header_MAX32650.c - ${MAX32_CMSIS}/Device/Maxim/MAX32650/Source/system_max32650.c - ${PERIPH_SRC}/SYS/mxc_assert.c - ${PERIPH_SRC}/SYS/mxc_delay.c - ${PERIPH_SRC}/SYS/mxc_lock.c - ${PERIPH_SRC}/SYS/nvic_table.c - ${PERIPH_SRC}/SYS/pins_me10.c - ${PERIPH_SRC}/SYS/sys_me10.c - ${PERIPH_SRC}/TPU/tpu_me10.c - ${PERIPH_SRC}/TPU/tpu_reva.c - ${PERIPH_SRC}/FLC/flc_common.c - ${PERIPH_SRC}/FLC/flc_me10.c - ${PERIPH_SRC}/FLC/flc_reva.c - ${PERIPH_SRC}/GPIO/gpio_common.c - ${PERIPH_SRC}/GPIO/gpio_me10.c - ${PERIPH_SRC}/GPIO/gpio_reva.c - ${PERIPH_SRC}/ICC/icc_me10.c - ${PERIPH_SRC}/ICC/icc_reva.c - ${PERIPH_SRC}/ICC/icc_common.c - ${PERIPH_SRC}/UART/uart_common.c - ${PERIPH_SRC}/UART/uart_me10.c - ${PERIPH_SRC}/UART/uart_reva.c - ${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} - ) - target_include_directories(${BOARD_TARGET} PUBLIC - ${CMAKE_CURRENT_FUNCTION_LIST_DIR} - ${MAX32_CMSIS}/Include - ${MAX32_CMSIS}/Device/Maxim/MAX32650/Include - ${MAX32_PERIPH}/Include/MAX32650 - ${PERIPH_SRC}/SYS - ${PERIPH_SRC}/GPIO - ${PERIPH_SRC}/TPU - ${PERIPH_SRC}/ICC - ${PERIPH_SRC}/FLC - ${PERIPH_SRC}/UART - ) - - target_compile_options(${BOARD_TARGET} PRIVATE - -Wno-error=strict-prototypes - ) - update_board(${BOARD_TARGET}) - - if (CMAKE_C_COMPILER_ID STREQUAL "GNU") - target_link_options(${BOARD_TARGET} PUBLIC - "LINKER:--script=${LD_FILE_GNU}" - -nostartfiles - --specs=nosys.specs --specs=nano.specs - -u sb_header #Needed when linking libraries to not lose the Signing header - ) - elseif (CMAKE_C_COMPILER_ID STREQUAL "Clang") - target_link_options(${BOARD_TARGET} PUBLIC - "LINKER:--script=${LD_FILE_Clang}" - ) - endif () -endfunction() - - -#------------------------------------ -# Functions -#------------------------------------ -function(family_configure_example TARGET RTOS) - family_configure_common(${TARGET} ${RTOS}) - - # Board target - add_board_target(board_${BOARD}) - - #---------- Port Specific ---------- - # These files are built for each example since it depends on example's tusb_config.h - target_sources(${TARGET} PUBLIC - # BSP - ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/family.c - ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/../board.c - ) - target_include_directories(${TARGET} PUBLIC - # family, hw, board - ${CMAKE_CURRENT_FUNCTION_LIST_DIR} - ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/../../ - ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/boards/${BOARD} - ) - - # Add TinyUSB target and port source - family_add_tinyusb(${TARGET} OPT_MCU_MAX32650) - target_sources(${TARGET} PUBLIC - ${TOP}/src/portable/mentor/musb/dcd_musb.c - ) - target_compile_options(${TARGET} PRIVATE - -Wno-error=strict-prototypes - ) - - target_link_libraries(${TARGET} PUBLIC board_${BOARD}) - target_compile_options(${TARGET} PRIVATE - -Wno-error=strict-prototypes - ) - - - - # Flashing - family_add_bin_hex(${TARGET}) - family_flash_jlink(${TARGET}) - family_flash_openocd_adi(${TARGET}) - - # Add the optional MSDK OpenOCD flashing - family_flash_msdk(${TARGET}) -endfunction() - -function(family_flash_msdk TARGET) - # Prepare the image (signed) if the board requires it - prepare_image(${TARGET}) - - set(MAXIM_PATH "$ENV{MAXIM_PATH}") - add_custom_target(${TARGET}-msdk - DEPENDS ${TARGET} - COMMAND ${MAXIM_PATH}/Tools/OpenOCD/openocd -s ${MAXIM_PATH}/Tools/OpenOCD/scripts - -f interface/cmsis-dap.cfg -f target/max32650.cfg - -c "program $ verify; init; reset; exit" - VERBATIM - ) -endfunction() diff --git a/hw/bsp/max32650/family.mk b/hw/bsp/max32650/family.mk deleted file mode 100644 index d2fc293e4..000000000 --- a/hw/bsp/max32650/family.mk +++ /dev/null @@ -1,140 +0,0 @@ -DEPS_SUBMODULES += lib/CMSIS_5 hw/mcu/analog/max32 - -# Important locations in the hw support for MCU -MAX32_CMSIS = hw/mcu/analog/max32/Libraries/CMSIS -MAX32_PERIPH = hw/mcu/analog/max32/Libraries/PeriphDrivers - -# Add any board specific make rules -include $(TOP)/$(BOARD_PATH)/board.mk - -CPU_CORE ?= cortex-m4 -PORT ?= 0 - -# GCC -SRC_S_GCC += $(MAX32_CMSIS)/Device/Maxim/MAX32650/Source/GCC/startup_max32650.S - -# -------------- -# Compiler Flags -# -------------- -# Flags for the MAX32650/1/2 SDK -CFLAGS += -DTARGET=MAX32650 \ - -DTARGET_REV=0x4131 \ - -DMXC_ASSERT_ENABLE \ - -DMAX32650 \ - -DIAR_PRAGMAS=0 - -# Flags for TUSB features -CFLAGS += \ - -DCFG_TUSB_MCU=OPT_MCU_MAX32650 \ - -DBOARD_TUD_MAX_SPEED=OPT_MODE_HIGH_SPEED - -# mcu driver cause following warnings -CFLAGS += -Wno-error=strict-prototypes \ - -Wno-error=unused-parameter \ - -Wno-error=cast-align \ - -Wno-error=cast-qual \ - -Wno-error=sign-compare - -LDFLAGS_GCC += -nostartfiles --specs=nosys.specs --specs=nano.specs - -# Configure the flash rule. By default, use JLink. -SIGNED_BUILD ?= 0 -DEFAULT_FLASH = flash-jlink - -# If the applications needs to be signed (for the MAX32651), sign it first and -# then need to use MSDK's OpenOCD to flash it -# Also need to include the __SLA_FWK__ define to enable the signed header into -# memory -ifeq ($(SIGNED_BUILD), 1) -# Extra definitions to build for the secure part -CFLAGS += -D__SLA_FWK__ -DEFAULT_FLASH := sign-build flash-msdk -endif - -# For flash-jlink target -JLINK_DEVICE = max32650 - -# Configure the flash rule -flash: $(DEFAULT_FLASH) - -# ----------------- -# Sources & Include -# ----------------- -PERIPH_SRC = $(TOP)/$(MAX32_PERIPH)/Source -SRC_C += \ - src/portable/mentor/musb/dcd_musb.c \ - $(MAX32_CMSIS)/Device/Maxim/MAX32650/Source/heap.c \ - $(MAX32_CMSIS)/Device/Maxim/MAX32650/Source/system_max32650.c \ - $(MAX32_CMSIS)/Device/Maxim/MAX32650/Source/header_MAX32650.c \ - $(PERIPH_SRC)/SYS/mxc_assert.c \ - $(PERIPH_SRC)/SYS/mxc_delay.c \ - $(PERIPH_SRC)/SYS/mxc_lock.c \ - $(PERIPH_SRC)/SYS/nvic_table.c \ - $(PERIPH_SRC)/SYS/pins_me10.c \ - $(PERIPH_SRC)/SYS/sys_me10.c \ - $(PERIPH_SRC)/FLC/flc_common.c \ - $(PERIPH_SRC)/FLC/flc_me10.c \ - $(PERIPH_SRC)/FLC/flc_reva.c \ - $(PERIPH_SRC)/GPIO/gpio_common.c \ - $(PERIPH_SRC)/GPIO/gpio_me10.c \ - $(PERIPH_SRC)/GPIO/gpio_reva.c \ - $(PERIPH_SRC)/ICC/icc_me10.c \ - $(PERIPH_SRC)/ICC/icc_reva.c \ - $(PERIPH_SRC)/ICC/icc_common.c \ - $(PERIPH_SRC)/TPU/tpu_me10.c \ - $(PERIPH_SRC)/TPU/tpu_reva.c \ - $(PERIPH_SRC)/UART/uart_common.c \ - $(PERIPH_SRC)/UART/uart_me10.c \ - $(PERIPH_SRC)/UART/uart_reva.c \ - -INC += \ - $(TOP)/$(BOARD_PATH) \ - $(TOP)/$(MAX32_CMSIS)/Include \ - $(TOP)/$(MAX32_CMSIS)/Device/Maxim/MAX32650/Include \ - $(TOP)/$(MAX32_PERIPH)/Include/MAX32650 \ - $(PERIPH_SRC)/SYS \ - $(PERIPH_SRC)/GPIO \ - $(PERIPH_SRC)/ICC \ - $(PERIPH_SRC)/FLC \ - $(PERIPH_SRC)/TPU \ - $(PERIPH_SRC)/UART - - -# The MAX32651EVKIT is pin for pin identical to the MAX32650EVKIT, however the -# MAX32651 has a secure bootloader which requires the image to be signed before -# loading into flash. All MAX32651EVKIT's have the same key for evaluation -# purposes, so create a special flash rule to sign the binary and flash using -# the MSDK. -MCU_PATH = $(TOP)/hw/mcu/analog/max32/ -# Assume no extension for sign utility -SIGN_EXE = sign_app -ifeq ($(OS), Windows_NT) -# Must use .exe extension on Windows, since the binaries -# for Linux may live in the same place. -SIGN_EXE := sign_app.exe -else -UNAME = $(shell uname -s) -ifneq ($(findstring MSYS_NT,$(UNAME)),) -# Must also use .exe extension for MSYS2 -SIGN_EXE := sign_app.exe -endif -endif - -# Rule to sign the build. This will in-place modify the existing .elf file -# an populate the .sig section with the signature value -sign-build: $(BUILD)/$(PROJECT).elf - $(OBJCOPY) $(BUILD)/$(PROJECT).elf -R .sig -O binary $(BUILD)/$(PROJECT).bin - $(MCU_PATH)/Tools/SBT/bin/$(SIGN_EXE) -c MAX32651 \ - key_file="$(MCU_PATH)/Tools/SBT/devices/MAX32651/keys/maximtestcrk.key" \ - ca=$(BUILD)/$(PROJECT).bin sca=$(BUILD)/$(PROJECT).sbin - $(OBJCOPY) $(BUILD)/$(PROJECT).elf --update-section .sig=$(BUILD)/$(PROJECT).sig - -# Optional flash option when running within an installed MSDK to use OpenOCD -# Mainline OpenOCD does not yet have the MAX32's flash algorithm integrated. -# If the MSDK is installed, flash-msdk can be run to utilize the the modified -# openocd with the algorithms -MAXIM_PATH := $(subst \,/,$(MAXIM_PATH)) -flash-msdk: $(BUILD)/$(PROJECT).elf - $(MAXIM_PATH)/Tools/OpenOCD/openocd -s $(MAXIM_PATH)/Tools/OpenOCD/scripts \ - -f interface/cmsis-dap.cfg -f target/max32650.cfg \ - -c "program $(BUILD)/$(PROJECT).elf verify; init; reset; exit" diff --git a/hw/bsp/max32666/FreeRTOSConfig/FreeRTOSConfig.h b/hw/bsp/max32666/FreeRTOSConfig/FreeRTOSConfig.h deleted file mode 100644 index e5a76af85..000000000 --- a/hw/bsp/max32666/FreeRTOSConfig/FreeRTOSConfig.h +++ /dev/null @@ -1,149 +0,0 @@ -/* - * FreeRTOS Kernel V10.0.0 - * Copyright (C) 2017 Amazon.com, Inc. or its affiliates. All Rights Reserved. - * - * Permission is hereby granted, free of charge, to any person obtaining a copy of - * this software and associated documentation files (the "Software"), to deal in - * the Software without restriction, including without limitation the rights to - * use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of - * the Software, and to permit persons to whom the Software is furnished to do so, - * subject to the following conditions: - * - * The above copyright notice and this permission notice shall be included in all - * copies or substantial portions of the Software. If you wish to use our Amazon - * FreeRTOS name, please do so in a fair use way that does not cause confusion. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR - * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS - * FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR - * COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER - * IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN - * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. - * - * http://www.FreeRTOS.org - * http://aws.amazon.com/freertos - * - * 1 tab == 4 spaces! - */ - - -#ifndef FREERTOS_CONFIG_H -#define FREERTOS_CONFIG_H - -/*----------------------------------------------------------- - * Application specific definitions. - * - * These definitions should be adjusted for your particular hardware and - * application requirements. - * - * THESE PARAMETERS ARE DESCRIBED WITHIN THE 'CONFIGURATION' SECTION OF THE - * FreeRTOS API DOCUMENTATION AVAILABLE ON THE FreeRTOS.org WEB SITE. - * - * See http://www.freertos.org/a00110.html. - *----------------------------------------------------------*/ - -// skip if included from IAR assembler -#ifndef __IASMARM__ - #include "mxc_device.h" -#endif - -/* Cortex M23/M33 port configuration. */ -#define configENABLE_MPU 0 -#define configENABLE_FPU 1 -#define configENABLE_TRUSTZONE 0 -#define configMINIMAL_SECURE_STACK_SIZE (1024) - -#define configUSE_PREEMPTION 1 -#define configUSE_PORT_OPTIMISED_TASK_SELECTION 0 -#define configCPU_CLOCK_HZ SystemCoreClock -#define configTICK_RATE_HZ ( 1000 ) -#define configMAX_PRIORITIES ( 5 ) -#define configMINIMAL_STACK_SIZE ( 128 ) -#define configTOTAL_HEAP_SIZE ( configSUPPORT_DYNAMIC_ALLOCATION*4*1024 ) -#define configMAX_TASK_NAME_LEN 16 -#define configUSE_16_BIT_TICKS 0 -#define configIDLE_SHOULD_YIELD 1 -#define configUSE_MUTEXES 1 -#define configUSE_RECURSIVE_MUTEXES 1 -#define configUSE_COUNTING_SEMAPHORES 1 -#define configQUEUE_REGISTRY_SIZE 4 -#define configUSE_QUEUE_SETS 0 -#define configUSE_TIME_SLICING 0 -#define configUSE_NEWLIB_REENTRANT 0 -#define configENABLE_BACKWARD_COMPATIBILITY 1 -#define configSTACK_ALLOCATION_FROM_SEPARATE_HEAP 0 - -#define configSUPPORT_STATIC_ALLOCATION 1 -#define configSUPPORT_DYNAMIC_ALLOCATION 0 - -/* Hook function related definitions. */ -#define configUSE_IDLE_HOOK 0 -#define configUSE_TICK_HOOK 0 -#define configUSE_MALLOC_FAILED_HOOK 0 // cause nested extern warning -#define configCHECK_FOR_STACK_OVERFLOW 2 -#define configCHECK_HANDLER_INSTALLATION 0 - -/* Run time and task stats gathering related definitions. */ -#define configGENERATE_RUN_TIME_STATS 0 -#define configRECORD_STACK_HIGH_ADDRESS 1 -#define configUSE_TRACE_FACILITY 1 // legacy trace -#define configUSE_STATS_FORMATTING_FUNCTIONS 0 - -/* Co-routine definitions. */ -#define configUSE_CO_ROUTINES 0 -#define configMAX_CO_ROUTINE_PRIORITIES 2 - -/* Software timer related definitions. */ -#define configUSE_TIMERS 1 -#define configTIMER_TASK_PRIORITY (configMAX_PRIORITIES-2) -#define configTIMER_QUEUE_LENGTH 32 -#define configTIMER_TASK_STACK_DEPTH configMINIMAL_STACK_SIZE - -/* Optional functions - most linkers will remove unused functions anyway. */ -#define INCLUDE_vTaskPrioritySet 0 -#define INCLUDE_uxTaskPriorityGet 0 -#define INCLUDE_vTaskDelete 0 -#define INCLUDE_vTaskSuspend 1 // required for queue, semaphore, mutex to be blocked indefinitely with portMAX_DELAY -#define INCLUDE_xResumeFromISR 0 -#define INCLUDE_vTaskDelayUntil 1 -#define INCLUDE_vTaskDelay 1 -#define INCLUDE_xTaskGetSchedulerState 0 -#define INCLUDE_xTaskGetCurrentTaskHandle 1 -#define INCLUDE_uxTaskGetStackHighWaterMark 0 -#define INCLUDE_xTaskGetIdleTaskHandle 0 -#define INCLUDE_xTimerGetTimerDaemonTaskHandle 0 -#define INCLUDE_pcTaskGetTaskName 0 -#define INCLUDE_eTaskGetState 0 -#define INCLUDE_xEventGroupSetBitFromISR 0 -#define INCLUDE_xTimerPendFunctionCall 0 - -/* FreeRTOS hooks to NVIC vectors */ -#define xPortPendSVHandler PendSV_Handler -#define xPortSysTickHandler SysTick_Handler -#define vPortSVCHandler SVC_Handler - -//--------------------------------------------------------------------+ -// Interrupt nesting behavior configuration. -//--------------------------------------------------------------------+ - -// For Cortex-M specific: __NVIC_PRIO_BITS is defined in mcu header -#define configPRIO_BITS __NVIC_PRIO_BITS - -/* The lowest interrupt priority that can be used in a call to a "set priority" function. */ -#define configLIBRARY_LOWEST_INTERRUPT_PRIORITY ((1<-jlink` target for CMake. - -Both the Evaluation Kit and Feather boards are shipped with a CMSIS-DAP -compatible debug probe. However, at the time of writing, the necessary flashing -algorithms for OpenOCD have not yet been incorporated into the OpenOCD master -branch. To utilize the provided debug probes, please install the bundled MSDK -package which includes the appropriate OpenOCD modifications. To leverage this -OpenOCD instance, run the `flash-msdk` Makefile rule, or `-msdk` CMake -target. diff --git a/hw/bsp/max32666/boards/max32666evkit/board.cmake b/hw/bsp/max32666/boards/max32666evkit/board.cmake deleted file mode 100644 index 9dc6962eb..000000000 --- a/hw/bsp/max32666/boards/max32666evkit/board.cmake +++ /dev/null @@ -1 +0,0 @@ -# Nothing to be done at the board level diff --git a/hw/bsp/max32666/boards/max32666evkit/board.h b/hw/bsp/max32666/boards/max32666evkit/board.h deleted file mode 100644 index 54589444d..000000000 --- a/hw/bsp/max32666/boards/max32666evkit/board.h +++ /dev/null @@ -1,62 +0,0 @@ -/* - * The MIT License (MIT) - * - * Copyright (c) 2024, Brent Kowal (Analog Devices, Inc) - * - * Permission is hereby granted, free of charge, to any person obtaining a copy - * of this software and associated documentation files (the "Software"), to deal - * in the Software without restriction, including without limitation the rights - * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell - * copies of the Software, and to permit persons to whom the Software is - * furnished to do so, subject to the following conditions: - * - * The above copyright notice and this permission notice shall be included in - * all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR - * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, - * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE - * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER - * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, - * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN - * THE SOFTWARE. - * - * This file is part of the TinyUSB stack. - */ - -/* metadata: - name: MAX32666 EVKIT - url: https://www.analog.com/en/resources/evaluation-hardware-and-software/evaluation-boards-kits/max32666evkit.html -*/ - -#ifndef BOARD_H_ -#define BOARD_H_ - -#include "gpio.h" -#include "mxc_sys.h" - -#ifdef __cplusplus -extern "C" { -#endif - -// LED -#define LED_PORT MXC_GPIO1 -#define LED_PIN MXC_GPIO_PIN_14 -#define LED_VDDIO MXC_GPIO_VSSEL_VDDIOH -#define LED_STATE_ON 0 - -// Button -#define BUTTON_PORT MXC_GPIO1 -#define BUTTON_PIN MXC_GPIO_PIN_6 -#define BUTTON_PULL MXC_GPIO_PAD_PULL_UP -#define BUTTON_STATE_ACTIVE 0 - -// UART Enable for EvKit's Integrated FTDI Adapter. Pin Mux handled by the HAL -#define UART_NUM 1 -#define UART_MAP MAP_A - -#ifdef __cplusplus -} -#endif - -#endif /* BOARD_H_ */ diff --git a/hw/bsp/max32666/boards/max32666evkit/board.mk b/hw/bsp/max32666/boards/max32666evkit/board.mk deleted file mode 100644 index a813a5327..000000000 --- a/hw/bsp/max32666/boards/max32666evkit/board.mk +++ /dev/null @@ -1 +0,0 @@ -# No specific build requirements for the board. diff --git a/hw/bsp/max32666/boards/max32666fthr/board.cmake b/hw/bsp/max32666/boards/max32666fthr/board.cmake deleted file mode 100644 index 9dc6962eb..000000000 --- a/hw/bsp/max32666/boards/max32666fthr/board.cmake +++ /dev/null @@ -1 +0,0 @@ -# Nothing to be done at the board level diff --git a/hw/bsp/max32666/boards/max32666fthr/board.h b/hw/bsp/max32666/boards/max32666fthr/board.h deleted file mode 100644 index 0caea5934..000000000 --- a/hw/bsp/max32666/boards/max32666fthr/board.h +++ /dev/null @@ -1,62 +0,0 @@ -/* - * The MIT License (MIT) - * - * Copyright (c) 2024, Brent Kowal (Analog Devices, Inc) - * - * Permission is hereby granted, free of charge, to any person obtaining a copy - * of this software and associated documentation files (the "Software"), to deal - * in the Software without restriction, including without limitation the rights - * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell - * copies of the Software, and to permit persons to whom the Software is - * furnished to do so, subject to the following conditions: - * - * The above copyright notice and this permission notice shall be included in - * all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR - * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, - * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE - * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER - * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, - * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN - * THE SOFTWARE. - * - * This file is part of the TinyUSB stack. - */ - -/* metadata: - name: MAX32666 Feather - url: https://www.analog.com/en/resources/evaluation-hardware-and-software/evaluation-boards-kits/max32666fthr.html -*/ - -#ifndef BOARD_H_ -#define BOARD_H_ - -#include "gpio.h" -#include "mxc_sys.h" - -#ifdef __cplusplus -extern "C" { -#endif - -// LED -#define LED_PORT MXC_GPIO0 -#define LED_PIN MXC_GPIO_PIN_29 -#define LED_VDDIO MXC_GPIO_VSSEL_VDDIOH -#define LED_STATE_ON 0 - -// Button -#define BUTTON_PORT MXC_GPIO1 -#define BUTTON_PIN MXC_GPIO_PIN_10 -#define BUTTON_PULL MXC_GPIO_PAD_PULL_UP -#define BUTTON_STATE_ACTIVE 0 - -// UART Enable for UART on SWD. Pin Mux handled by the HAL -#define UART_NUM 1 -#define UART_MAP MAP_B - -#ifdef __cplusplus -} -#endif - -#endif /* BOARD_H_ */ diff --git a/hw/bsp/max32666/boards/max32666fthr/board.mk b/hw/bsp/max32666/boards/max32666fthr/board.mk deleted file mode 100644 index a813a5327..000000000 --- a/hw/bsp/max32666/boards/max32666fthr/board.mk +++ /dev/null @@ -1 +0,0 @@ -# No specific build requirements for the board. diff --git a/hw/bsp/max32666/family.c b/hw/bsp/max32666/family.c deleted file mode 100644 index 05306c6c9..000000000 --- a/hw/bsp/max32666/family.c +++ /dev/null @@ -1,177 +0,0 @@ -/* - * The MIT License (MIT) - * - * Copyright (c) 2024 Brent Kowal (Analog Devices, Inc) - * - * Permission is hereby granted, free of charge, to any person obtaining a copy - * of this software and associated documentation files (the "Software"), to deal - * in the Software without restriction, including without limitation the rights - * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell - * copies of the Software, and to permit persons to whom the Software is - * furnished to do so, subject to the following conditions: - * - * The above copyright notice and this permission notice shall be included in - * all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR - * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, - * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE - * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER - * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, - * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN - * THE SOFTWARE. - * - * This file is part of the TinyUSB stack. - */ - -/* metadata: - manufacturer: Analog Devices -*/ - -#ifdef __GNUC__ -#pragma GCC diagnostic push -#pragma GCC diagnostic ignored "-Wstrict-prototypes" // _mxc_crit_get_state() -#endif - -#include "gpio.h" -#include "mxc_sys.h" -#include "mcr_regs.h" -#include "mxc_device.h" -#include "uart.h" - -#ifdef __GNUC__ -#pragma GCC diagnostic pop -#endif - -#include "board.h" -#include "bsp/board_api.h" - -//--------------------------------------------------------------------+ -// Forward USB interrupt events to TinyUSB IRQ Handler -//--------------------------------------------------------------------+ -void USB_IRQHandler(void) { - tud_int_handler(0); -} - -//--------------------------------------------------------------------+ -// MACRO TYPEDEF CONSTANT ENUM -//--------------------------------------------------------------------+ -mxc_uart_regs_t *ConsoleUart = MXC_UART_GET_UART(UART_NUM); - -void board_init(void) { -#if CFG_TUSB_OS == OPT_OS_NONE - // 1ms tick timer - SysTick_Config(SystemCoreClock / 1000); -#elif CFG_TUSB_OS == OPT_OS_FREERTOS - // If freeRTOS is used, IRQ priority is limit by max syscall ( smaller is higher ) - NVIC_SetPriority(USB_IRQn, configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY); -#endif - mxc_gpio_cfg_t gpioConfig; - - // LED - gpioConfig.drvstr = MXC_GPIO_DRVSTR_0; - gpioConfig.func = MXC_GPIO_FUNC_OUT; - gpioConfig.mask = LED_PIN; - gpioConfig.pad = MXC_GPIO_PAD_NONE; - gpioConfig.port = LED_PORT; - gpioConfig.vssel = LED_VDDIO; - MXC_GPIO_Config(&gpioConfig); - board_led_write(false); - - // Button - gpioConfig.drvstr = MXC_GPIO_DRVSTR_0; - gpioConfig.func = MXC_GPIO_FUNC_IN; - gpioConfig.mask = BUTTON_PIN; - gpioConfig.pad = BUTTON_PULL; - gpioConfig.port = BUTTON_PORT; - gpioConfig.vssel = MXC_GPIO_VSSEL_VDDIO; - MXC_GPIO_Config(&gpioConfig); - - // UART - MXC_UART_Init(ConsoleUart, CFG_BOARD_UART_BAUDRATE, UART_MAP); - - //USB - // Startup the HIRC96M clock if it's not on already - if (!(MXC_GCR->clkcn & MXC_F_GCR_CLKCN_HIRC96M_EN)) { - MXC_GCR->clkcn |= MXC_F_GCR_CLKCN_HIRC96M_EN; - } - - MXC_SYS_ClockEnable(MXC_SYS_PERIPH_CLOCK_USB); - MXC_SYS_Reset_Periph(MXC_SYS_RESET_USB); -} - -//--------------------------------------------------------------------+ -// Board porting API -//--------------------------------------------------------------------+ - -void board_led_write(bool state) { -#if LED_STATE_ON - state = !state; -#endif - if (state) { - MXC_GPIO_OutClr(LED_PORT, LED_PIN); - } else { - MXC_GPIO_OutSet(LED_PORT, LED_PIN); - } -} - -uint32_t board_button_read(void) { - uint32_t state = MXC_GPIO_InGet(BUTTON_PORT, BUTTON_PIN) ? 1 : 0; - return BUTTON_STATE_ACTIVE == state; -} - -size_t board_get_unique_id(uint8_t id[], size_t max_len) { - uint8_t hw_id[MXC_SYS_USN_CHECKSUM_LEN];//USN Buffer - /* All other 2nd parameter is optional checksum buffer */ - MXC_SYS_GetUSN(hw_id, NULL); - - size_t act_len = TU_MIN(max_len, MXC_SYS_USN_LEN); - memcpy(id, hw_id, act_len); - return act_len; -} - -int board_uart_read(uint8_t *buf, int len) { - int uart_val; - int act_len = 0; - - while (act_len < len) { - if ((uart_val = MXC_UART_ReadCharacterRaw(ConsoleUart)) == E_UNDERFLOW) { - break; - } else { - *buf++ = (uint8_t) uart_val; - act_len++; - } - } - return act_len; -} - -int board_uart_write(void const *buf, int len) { - int act_len = 0; - const uint8_t *ch_ptr = (const uint8_t *) buf; - while (act_len < len) { - MXC_UART_WriteCharacter(ConsoleUart, *ch_ptr++); - act_len++; - } - return len; -} - -#if CFG_TUSB_OS == OPT_OS_NONE -volatile uint32_t system_ticks = 0; - -void SysTick_Handler(void) { - system_ticks++; -} - -uint32_t board_millis(void) { - return system_ticks; -} -#endif - -void HardFault_Handler(void) { - __asm("BKPT #0\n"); -} - -// Required by __libc_init_array in startup code if we are compiling using -// -nostdlib/-nostartfiles. -void _init(void) { -} diff --git a/hw/bsp/max32666/family.cmake b/hw/bsp/max32666/family.cmake deleted file mode 100644 index 49798729a..000000000 --- a/hw/bsp/max32666/family.cmake +++ /dev/null @@ -1,147 +0,0 @@ -include_guard() - -set(MAX32_PERIPH ${TOP}/hw/mcu/analog/max32/Libraries/PeriphDrivers) -set(MAX32_CMSIS ${TOP}/hw/mcu/analog/max32/Libraries/CMSIS) -set(CMSIS_5 ${TOP}/lib/CMSIS_5) - -# include board specific -include(${CMAKE_CURRENT_LIST_DIR}/boards/${BOARD}/board.cmake) - -# Get the linker file from current location (family) -set(LD_FILE_GNU ${CMAKE_CURRENT_LIST_DIR}/max32666.ld) -set(LD_FILE_Clang ${LD_FILE_GNU}) - -# toolchain set up -set(CMAKE_SYSTEM_CPU cortex-m4 CACHE INTERNAL "System Processor") -set(CMAKE_TOOLCHAIN_FILE ${TOP}/examples/build_system/cmake/toolchain/arm_${TOOLCHAIN}.cmake) -set(JLINK_DEVICE max32666) -set(OPENOCD_OPTION "-f interface/cmsis-dap.cfg -f target/max32665.cfg") - -set(FAMILY_MCUS MAX32666 CACHE INTERNAL "") - -function(update_board TARGET) - target_compile_definitions(${TARGET} PUBLIC - TARGET=MAX32665 - TARGET_REV=0x4131 - MXC_ASSERT_ENABLE - MAX32665 - IAR_PRAGMAS=0 - CFG_TUSB_MCU=OPT_MCU_MAX32666 - BOARD_TUD_MAX_SPEED=OPT_MODE_HIGH_SPEED - ) -endfunction() - -#------------------------------------ -# BOARD_TARGET -#------------------------------------ -# only need to be built ONCE for all examples -function(add_board_target BOARD_TARGET) - if (TARGET ${BOARD_TARGET}) - return() - endif () - - # Startup & Linker script - set(STARTUP_FILE_GNU ${MAX32_CMSIS}/Device/Maxim/MAX32665/Source/GCC/startup_max32665.S) - set(STARTUP_FILE_Clang ${STARTUP_FILE_GNU}) - - set(PERIPH_SRC ${MAX32_PERIPH}/Source) - add_library(${BOARD_TARGET} STATIC - ${MAX32_CMSIS}/Device/Maxim/MAX32665/Source/heap.c - ${MAX32_CMSIS}/Device/Maxim/MAX32665/Source/system_max32665.c - ${PERIPH_SRC}/SYS/mxc_assert.c - ${PERIPH_SRC}/SYS/mxc_delay.c - ${PERIPH_SRC}/SYS/mxc_lock.c - ${PERIPH_SRC}/SYS/nvic_table.c - ${PERIPH_SRC}/SYS/pins_me14.c - ${PERIPH_SRC}/SYS/sys_me14.c - ${PERIPH_SRC}/TPU/tpu_me14.c - ${PERIPH_SRC}/TPU/tpu_reva.c - ${PERIPH_SRC}/FLC/flc_common.c - ${PERIPH_SRC}/FLC/flc_me14.c - ${PERIPH_SRC}/FLC/flc_reva.c - ${PERIPH_SRC}/GPIO/gpio_common.c - ${PERIPH_SRC}/GPIO/gpio_me14.c - ${PERIPH_SRC}/GPIO/gpio_reva.c - ${PERIPH_SRC}/ICC/icc_me14.c - ${PERIPH_SRC}/ICC/icc_reva.c - ${PERIPH_SRC}/UART/uart_common.c - ${PERIPH_SRC}/UART/uart_me14.c - ${PERIPH_SRC}/UART/uart_reva.c - ${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} - ) - target_include_directories(${BOARD_TARGET} PUBLIC - ${CMAKE_CURRENT_FUNCTION_LIST_DIR} - ${MAX32_CMSIS}/Include - ${MAX32_CMSIS}/Device/Maxim/MAX32665/Include - ${MAX32_PERIPH}/Include/MAX32665 - ${PERIPH_SRC}/SYS - ${PERIPH_SRC}/GPIO - ${PERIPH_SRC}/TPU - ${PERIPH_SRC}/ICC - ${PERIPH_SRC}/FLC - ${PERIPH_SRC}/UART - ) - - target_compile_options(${BOARD_TARGET} PRIVATE - -Wno-error=strict-prototypes - ) - update_board(${BOARD_TARGET}) - - if (CMAKE_C_COMPILER_ID STREQUAL "GNU") - target_link_options(${BOARD_TARGET} PUBLIC - "LINKER:--script=${LD_FILE_GNU}" - -nostartfiles - --specs=nosys.specs --specs=nano.specs - ) - elseif (CMAKE_C_COMPILER_ID STREQUAL "Clang") - target_link_options(${BOARD_TARGET} PUBLIC - "LINKER:--script=${LD_FILE_Clang}" - ) - endif () -endfunction() - - -#------------------------------------ -# Functions -#------------------------------------ -function(family_configure_example TARGET RTOS) - family_configure_common(${TARGET} ${RTOS}) - - # Board target - add_board_target(board_${BOARD}) - - #---------- Port Specific ---------- - # These files are built for each example since it depends on example's tusb_config.h - target_sources(${TARGET} PUBLIC - # BSP - ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/family.c - ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/../board.c - ) - target_include_directories(${TARGET} PUBLIC - # family, hw, board - ${CMAKE_CURRENT_FUNCTION_LIST_DIR} - ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/../../ - ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/boards/${BOARD} - ) - - # Add TinyUSB target and port source - family_add_tinyusb(${TARGET} OPT_MCU_MAX32666) - target_sources(${TARGET} PUBLIC - ${TOP}/src/portable/mentor/musb/dcd_musb.c - ) - target_compile_options(${TARGET} PRIVATE - -Wno-error=strict-prototypes - ) - - target_link_libraries(${TARGET} PUBLIC board_${BOARD}) - target_compile_options(${TARGET} PRIVATE - -Wno-error=strict-prototypes - ) - - - - # Flashing - family_add_bin_hex(${TARGET}) - family_flash_jlink(${TARGET}) - family_flash_openocd_adi(${TARGET}) -endfunction() diff --git a/hw/bsp/max32666/family.mk b/hw/bsp/max32666/family.mk deleted file mode 100644 index b4f7d1e57..000000000 --- a/hw/bsp/max32666/family.mk +++ /dev/null @@ -1,93 +0,0 @@ -DEPS_SUBMODULES += lib/CMSIS_5 hw/mcu/analog/max32 - -# Important locations in the hw support for MCU -MAX32_CMSIS = hw/mcu/analog/max32/Libraries/CMSIS -MAX32_PERIPH = hw/mcu/analog/max32/Libraries/PeriphDrivers - -# Add any board specific make rules -include $(TOP)/$(BOARD_PATH)/board.mk - -CPU_CORE ?= cortex-m4 -PORT ?= 0 - -# GCC -SRC_S_GCC += $(MAX32_CMSIS)/Device/Maxim/MAX32665/Source/GCC/startup_max32665.S -LD_FILE = $(FAMILY_PATH)/max32666.ld - -# -------------- -# Compiler Flags -# -------------- -# Flags for the MAX32665/6 SDK -CFLAGS += -DTARGET=MAX32665 \ - -DTARGET_REV=0x4131 \ - -DMXC_ASSERT_ENABLE \ - -DMAX32665 \ - -DIAR_PRAGMAS=0 - -# Flags for TUSB features -CFLAGS += \ - -DCFG_TUSB_MCU=OPT_MCU_MAX32666 \ - -DBOARD_TUD_MAX_SPEED=OPT_MODE_HIGH_SPEED - -# mcu driver cause following warnings -CFLAGS += -Wno-error=strict-prototypes \ - -Wno-error=unused-parameter \ - -Wno-error=cast-align \ - -Wno-error=cast-qual -LDFLAGS_GCC += -nostartfiles --specs=nosys.specs --specs=nano.specs - -# For flash-jlink target -JLINK_DEVICE = max32666 - -# flash target using Jlink by default -flash: flash-jlink - -# Optional flash option when running within an installed MSDK to use OpenOCD -# Mainline OpenOCD does not yet have the MAX32's flash algorithm integrated. -# If the MSDK is installed, flash-msdk can be run to utilize the the modified -# openocd with the algorithms -MAXIM_PATH := $(subst \,/,$(MAXIM_PATH)) -flash-msdk: $(BUILD)/$(PROJECT).elf - $(MAXIM_PATH)/Tools/OpenOCD/openocd -s $(MAXIM_PATH)/Tools/OpenOCD/scripts \ - -f interface/cmsis-dap.cfg -f target/max32665.cfg \ - -c "program $(BUILD)/$(PROJECT).elf verify; init; reset; exit" - -# ----------------- -# Sources & Include -# ----------------- -PERIPH_SRC = $(TOP)/$(MAX32_PERIPH)/Source -SRC_C += \ - src/portable/mentor/musb/dcd_musb.c \ - $(MAX32_CMSIS)/Device/Maxim/MAX32665/Source/heap.c \ - $(MAX32_CMSIS)/Device/Maxim/MAX32665/Source/system_max32665.c \ - $(PERIPH_SRC)/SYS/mxc_assert.c \ - $(PERIPH_SRC)/SYS/mxc_delay.c \ - $(PERIPH_SRC)/SYS/mxc_lock.c \ - $(PERIPH_SRC)/SYS/nvic_table.c \ - $(PERIPH_SRC)/SYS/pins_me14.c \ - $(PERIPH_SRC)/SYS/sys_me14.c \ - $(PERIPH_SRC)/FLC/flc_common.c \ - $(PERIPH_SRC)/FLC/flc_me14.c \ - $(PERIPH_SRC)/FLC/flc_reva.c \ - $(PERIPH_SRC)/GPIO/gpio_common.c \ - $(PERIPH_SRC)/GPIO/gpio_me14.c \ - $(PERIPH_SRC)/GPIO/gpio_reva.c \ - $(PERIPH_SRC)/ICC/icc_me14.c \ - $(PERIPH_SRC)/ICC/icc_reva.c \ - $(PERIPH_SRC)/TPU/tpu_me14.c \ - $(PERIPH_SRC)/TPU/tpu_reva.c \ - $(PERIPH_SRC)/UART/uart_common.c \ - $(PERIPH_SRC)/UART/uart_me14.c \ - $(PERIPH_SRC)/UART/uart_reva.c \ - -INC += \ - $(TOP)/$(BOARD_PATH) \ - $(TOP)/$(MAX32_CMSIS)/Include \ - $(TOP)/$(MAX32_CMSIS)/Device/Maxim/MAX32665/Include \ - $(TOP)/$(MAX32_PERIPH)/Include/MAX32665 \ - $(PERIPH_SRC)/SYS \ - $(PERIPH_SRC)/GPIO \ - $(PERIPH_SRC)/ICC \ - $(PERIPH_SRC)/FLC \ - $(PERIPH_SRC)/TPU \ - $(PERIPH_SRC)/UART diff --git a/hw/bsp/max32666/max32666.ld b/hw/bsp/max32666/max32666.ld deleted file mode 100644 index 06c124247..000000000 --- a/hw/bsp/max32666/max32666.ld +++ /dev/null @@ -1,135 +0,0 @@ -/* SPID and SPIX Sections here are maximum possible sizes */ -/* If used, they should be adjusted for the external Flash/RAM size */ -MEMORY { - - SPIX (rx) : ORIGIN = 0x08000000, LENGTH = 0x08000000 - FLASH (rx) : ORIGIN = 0x10000000, LENGTH = 0x00100000 - SRAM (rwx) : ORIGIN = 0x20000000, LENGTH = 0x0008C000 - SPID (rw) : ORIGIN = 0x80000000, LENGTH = 512M -} - -/* Sections Definitions */ -SECTIONS { - .text : - { - _text = .; - KEEP(*(.isr_vector)) - *(.text*) /* program code */ - *(.rodata*) /* read-only data: "const" */ - - KEEP(*(.init)) - KEEP(*(.fini)) - - /* .ctors */ - *crtbegin.o(.ctors) - *crtbegin?.o(.ctors) - *(EXCLUDE_FILE(*crtend?.o *crtend.o) .ctors) - *(SORT(.ctors.*)) - *(.ctors) - - /* .dtors */ - *crtbegin.o(.dtors) - *crtbegin?.o(.dtors) - *(EXCLUDE_FILE(*crtend?.o *crtend.o) .dtors) - *(SORT(.dtors.*)) - *(.dtors) - - /* C++ Exception handling */ - KEEP(*(.eh_frame*)) - _etext = .; - } > FLASH - - .ARM.extab : - { - *(.ARM.extab* .gnu.linkonce.armextab.*) - } > FLASH - - /* This section will keep the SPIX data until loaded into the external device */ - /* Upon initialization of SPIX (user code needs to do this) */ - .xip_section : - { - KEEP(*(.xip_section*)) - } > SPIX AT>FLASH - - __load_start_xip = LOADADDR(.xip_section); - __load_length_xip = SIZEOF(.xip_section); - - /* it's used for C++ exception handling */ - /* we need to keep this to avoid overlapping */ - .ARM.exidx : - { - __exidx_start = .; - *(.ARM.exidx* .gnu.linkonce.armexidx.*) - __exidx_end = .; - } > FLASH - - .data : - { - _data = ALIGN(., 4); - *(vtable) - *(.data*) /*read-write initialized data: initialized global variable*/ - *(.spix_config*) /* SPIX configuration functions need to be run from SRAM */ - *(.flashprog*) /* Flash program */ - - - /* These array sections are used by __libc_init_array to call static C++ constructors */ - . = ALIGN(4); - /* preinit data */ - PROVIDE_HIDDEN (__preinit_array_start = .); - KEEP(*(.preinit_array)) - PROVIDE_HIDDEN (__preinit_array_end = .); - - . = ALIGN(4); - /* init data */ - PROVIDE_HIDDEN (__init_array_start = .); - KEEP(*(SORT(.init_array.*))) - KEEP(*(.init_array)) - PROVIDE_HIDDEN (__init_array_end = .); - - . = ALIGN(4); - /* finit data */ - PROVIDE_HIDDEN (__fini_array_start = .); - KEEP(*(SORT(.fini_array.*))) - KEEP(*(.fini_array)) - PROVIDE_HIDDEN (__fini_array_end = .); - - _edata = ALIGN(., 4); - } > SRAM AT>FLASH - __load_data = LOADADDR(.data); - - .bss : - { - . = ALIGN(4); - _bss = .; - *(.bss*) /*read-write zero initialized data: uninitialized global variable*/ - *(COMMON) - _ebss = ALIGN(., 4); - } > SRAM - - /* Setup the stack for Core 1, it will only be used if the user code - * includes a definition of Stack_Size_Core1, which defines the space - * reserved above the main core's stack for core 1's stack */ - - __StackTop_Core1 = ORIGIN(SRAM) + LENGTH(SRAM); - __StackLimit_Core1 = DEFINED(Stack_Size_Core1) ? __StackTop_Core1 - Stack_Size_Core1 : __StackTop_Core1; - - /* Set stack top to end of RAM, and stack limit move down by Stack_Size. - * If core 1 is used, set the stack to the bottom of Core 1's stack region */ - - __StackTop = DEFINED(Stack_Size_Core1) ? __StackLimit_Core1 : ORIGIN(SRAM) + LENGTH(SRAM); - __StackLimit = __StackTop - Stack_Size; - - .heap (COPY): - { - . = ALIGN(4); - PROVIDE ( end = . ); - PROVIDE ( _end = . ); - *(.heap*) - __HeapLimit = ABSOLUTE(__StackLimit); - } > SRAM - - PROVIDE(__stack = __StackTop); - - /* Check if data + heap + stack(s) exceeds RAM limit */ - ASSERT(__StackLimit >= _ebss, "region RAM overflowed with stack") -} diff --git a/hw/bsp/max32690/FreeRTOSConfig/FreeRTOSConfig.h b/hw/bsp/max32690/FreeRTOSConfig/FreeRTOSConfig.h deleted file mode 100644 index e5a76af85..000000000 --- a/hw/bsp/max32690/FreeRTOSConfig/FreeRTOSConfig.h +++ /dev/null @@ -1,149 +0,0 @@ -/* - * FreeRTOS Kernel V10.0.0 - * Copyright (C) 2017 Amazon.com, Inc. or its affiliates. All Rights Reserved. - * - * Permission is hereby granted, free of charge, to any person obtaining a copy of - * this software and associated documentation files (the "Software"), to deal in - * the Software without restriction, including without limitation the rights to - * use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of - * the Software, and to permit persons to whom the Software is furnished to do so, - * subject to the following conditions: - * - * The above copyright notice and this permission notice shall be included in all - * copies or substantial portions of the Software. If you wish to use our Amazon - * FreeRTOS name, please do so in a fair use way that does not cause confusion. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR - * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS - * FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR - * COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER - * IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN - * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. - * - * http://www.FreeRTOS.org - * http://aws.amazon.com/freertos - * - * 1 tab == 4 spaces! - */ - - -#ifndef FREERTOS_CONFIG_H -#define FREERTOS_CONFIG_H - -/*----------------------------------------------------------- - * Application specific definitions. - * - * These definitions should be adjusted for your particular hardware and - * application requirements. - * - * THESE PARAMETERS ARE DESCRIBED WITHIN THE 'CONFIGURATION' SECTION OF THE - * FreeRTOS API DOCUMENTATION AVAILABLE ON THE FreeRTOS.org WEB SITE. - * - * See http://www.freertos.org/a00110.html. - *----------------------------------------------------------*/ - -// skip if included from IAR assembler -#ifndef __IASMARM__ - #include "mxc_device.h" -#endif - -/* Cortex M23/M33 port configuration. */ -#define configENABLE_MPU 0 -#define configENABLE_FPU 1 -#define configENABLE_TRUSTZONE 0 -#define configMINIMAL_SECURE_STACK_SIZE (1024) - -#define configUSE_PREEMPTION 1 -#define configUSE_PORT_OPTIMISED_TASK_SELECTION 0 -#define configCPU_CLOCK_HZ SystemCoreClock -#define configTICK_RATE_HZ ( 1000 ) -#define configMAX_PRIORITIES ( 5 ) -#define configMINIMAL_STACK_SIZE ( 128 ) -#define configTOTAL_HEAP_SIZE ( configSUPPORT_DYNAMIC_ALLOCATION*4*1024 ) -#define configMAX_TASK_NAME_LEN 16 -#define configUSE_16_BIT_TICKS 0 -#define configIDLE_SHOULD_YIELD 1 -#define configUSE_MUTEXES 1 -#define configUSE_RECURSIVE_MUTEXES 1 -#define configUSE_COUNTING_SEMAPHORES 1 -#define configQUEUE_REGISTRY_SIZE 4 -#define configUSE_QUEUE_SETS 0 -#define configUSE_TIME_SLICING 0 -#define configUSE_NEWLIB_REENTRANT 0 -#define configENABLE_BACKWARD_COMPATIBILITY 1 -#define configSTACK_ALLOCATION_FROM_SEPARATE_HEAP 0 - -#define configSUPPORT_STATIC_ALLOCATION 1 -#define configSUPPORT_DYNAMIC_ALLOCATION 0 - -/* Hook function related definitions. */ -#define configUSE_IDLE_HOOK 0 -#define configUSE_TICK_HOOK 0 -#define configUSE_MALLOC_FAILED_HOOK 0 // cause nested extern warning -#define configCHECK_FOR_STACK_OVERFLOW 2 -#define configCHECK_HANDLER_INSTALLATION 0 - -/* Run time and task stats gathering related definitions. */ -#define configGENERATE_RUN_TIME_STATS 0 -#define configRECORD_STACK_HIGH_ADDRESS 1 -#define configUSE_TRACE_FACILITY 1 // legacy trace -#define configUSE_STATS_FORMATTING_FUNCTIONS 0 - -/* Co-routine definitions. */ -#define configUSE_CO_ROUTINES 0 -#define configMAX_CO_ROUTINE_PRIORITIES 2 - -/* Software timer related definitions. */ -#define configUSE_TIMERS 1 -#define configTIMER_TASK_PRIORITY (configMAX_PRIORITIES-2) -#define configTIMER_QUEUE_LENGTH 32 -#define configTIMER_TASK_STACK_DEPTH configMINIMAL_STACK_SIZE - -/* Optional functions - most linkers will remove unused functions anyway. */ -#define INCLUDE_vTaskPrioritySet 0 -#define INCLUDE_uxTaskPriorityGet 0 -#define INCLUDE_vTaskDelete 0 -#define INCLUDE_vTaskSuspend 1 // required for queue, semaphore, mutex to be blocked indefinitely with portMAX_DELAY -#define INCLUDE_xResumeFromISR 0 -#define INCLUDE_vTaskDelayUntil 1 -#define INCLUDE_vTaskDelay 1 -#define INCLUDE_xTaskGetSchedulerState 0 -#define INCLUDE_xTaskGetCurrentTaskHandle 1 -#define INCLUDE_uxTaskGetStackHighWaterMark 0 -#define INCLUDE_xTaskGetIdleTaskHandle 0 -#define INCLUDE_xTimerGetTimerDaemonTaskHandle 0 -#define INCLUDE_pcTaskGetTaskName 0 -#define INCLUDE_eTaskGetState 0 -#define INCLUDE_xEventGroupSetBitFromISR 0 -#define INCLUDE_xTimerPendFunctionCall 0 - -/* FreeRTOS hooks to NVIC vectors */ -#define xPortPendSVHandler PendSV_Handler -#define xPortSysTickHandler SysTick_Handler -#define vPortSVCHandler SVC_Handler - -//--------------------------------------------------------------------+ -// Interrupt nesting behavior configuration. -//--------------------------------------------------------------------+ - -// For Cortex-M specific: __NVIC_PRIO_BITS is defined in mcu header -#define configPRIO_BITS __NVIC_PRIO_BITS - -/* The lowest interrupt priority that can be used in a call to a "set priority" function. */ -#define configLIBRARY_LOWEST_INTERRUPT_PRIORITY ((1<-jlink` target for CMake. - -Both the Evaluation Kit and APARD boards are shipped with a CMSIS-DAP -compatible debug probe. However, at the time of writing, the necessary flashing -algorithms for OpenOCD have not yet been incorporated into the OpenOCD master -branch. To utilize the provided debug probes, please install the bundled MSDK -package which includes the appropriate OpenOCD modifications. To leverage this -OpenOCD instance, run the `flash-msdk` Makefile rule, or `-msdk` CMake -target. diff --git a/hw/bsp/max32690/boards/apard32690/board.cmake b/hw/bsp/max32690/boards/apard32690/board.cmake deleted file mode 100644 index 9dc6962eb..000000000 --- a/hw/bsp/max32690/boards/apard32690/board.cmake +++ /dev/null @@ -1 +0,0 @@ -# Nothing to be done at the board level diff --git a/hw/bsp/max32690/boards/apard32690/board.h b/hw/bsp/max32690/boards/apard32690/board.h deleted file mode 100644 index 87b9c4e88..000000000 --- a/hw/bsp/max32690/boards/apard32690/board.h +++ /dev/null @@ -1,61 +0,0 @@ -/* - * The MIT License (MIT) - * - * Copyright (c) 2024, Brent Kowal (Analog Devices, Inc) - * - * Permission is hereby granted, free of charge, to any person obtaining a copy - * of this software and associated documentation files (the "Software"), to deal - * in the Software without restriction, including without limitation the rights - * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell - * copies of the Software, and to permit persons to whom the Software is - * furnished to do so, subject to the following conditions: - * - * The above copyright notice and this permission notice shall be included in - * all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR - * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, - * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE - * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER - * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, - * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN - * THE SOFTWARE. - * - * This file is part of the TinyUSB stack. - */ - -/* metadata: - name: APARD32690-SL - url: https://www.analog.com/en/resources/evaluation-hardware-and-software/evaluation-boards-kits/ad-apard32690-sl.html -*/ - -#ifndef BOARD_H_ -#define BOARD_H_ - -#include "gpio.h" -#include "mxc_sys.h" - -#ifdef __cplusplus -extern "C" { -#endif - -// LED -#define LED_PORT MXC_GPIO2 -#define LED_PIN MXC_GPIO_PIN_1 -#define LED_VDDIO MXC_GPIO_VSSEL_VDDIOH -#define LED_STATE_ON 1 - -// Button -#define BUTTON_PORT MXC_GPIO1 -#define BUTTON_PIN MXC_GPIO_PIN_27 -#define BUTTON_PULL MXC_GPIO_PAD_NONE -#define BUTTON_STATE_ACTIVE 1 - -// UART Enable for UART on ARM SWD Connector -#define UART_NUM 0 - -#ifdef __cplusplus -} -#endif - -#endif /* BOARD_H_ */ diff --git a/hw/bsp/max32690/boards/apard32690/board.mk b/hw/bsp/max32690/boards/apard32690/board.mk deleted file mode 100644 index a813a5327..000000000 --- a/hw/bsp/max32690/boards/apard32690/board.mk +++ /dev/null @@ -1 +0,0 @@ -# No specific build requirements for the board. diff --git a/hw/bsp/max32690/boards/max32690evkit/board.cmake b/hw/bsp/max32690/boards/max32690evkit/board.cmake deleted file mode 100644 index 9dc6962eb..000000000 --- a/hw/bsp/max32690/boards/max32690evkit/board.cmake +++ /dev/null @@ -1 +0,0 @@ -# Nothing to be done at the board level diff --git a/hw/bsp/max32690/boards/max32690evkit/board.h b/hw/bsp/max32690/boards/max32690evkit/board.h deleted file mode 100644 index aa8dbb1de..000000000 --- a/hw/bsp/max32690/boards/max32690evkit/board.h +++ /dev/null @@ -1,61 +0,0 @@ -/* - * The MIT License (MIT) - * - * Copyright (c) 2024, Brent Kowal (Analog Devices, Inc) - * - * Permission is hereby granted, free of charge, to any person obtaining a copy - * of this software and associated documentation files (the "Software"), to deal - * in the Software without restriction, including without limitation the rights - * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell - * copies of the Software, and to permit persons to whom the Software is - * furnished to do so, subject to the following conditions: - * - * The above copyright notice and this permission notice shall be included in - * all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR - * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, - * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE - * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER - * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, - * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN - * THE SOFTWARE. - * - * This file is part of the TinyUSB stack. - */ - -/* metadata: - name: MAX32690 EVKIT - url: https://www.analog.com/en/resources/evaluation-hardware-and-software/evaluation-boards-kits/max32690evkit.html -*/ - -#ifndef BOARD_H_ -#define BOARD_H_ - -#include "gpio.h" -#include "mxc_sys.h" - -#ifdef __cplusplus -extern "C" { -#endif - -// LED -#define LED_PORT MXC_GPIO0 -#define LED_PIN MXC_GPIO_PIN_14 -#define LED_VDDIO MXC_GPIO_VSSEL_VDDIOH -#define LED_STATE_ON 0 - -// Button -#define BUTTON_PORT MXC_GPIO4 -#define BUTTON_PIN MXC_GPIO_PIN_0 -#define BUTTON_PULL MXC_GPIO_PAD_PULL_UP -#define BUTTON_STATE_ACTIVE 0 - -// UART Enable for EvKit's Integrated FTDI Adapter. Pin Mux handled by the HAL -#define UART_NUM 2 - -#ifdef __cplusplus -} -#endif - -#endif /* BOARD_H_ */ diff --git a/hw/bsp/max32690/boards/max32690evkit/board.mk b/hw/bsp/max32690/boards/max32690evkit/board.mk deleted file mode 100644 index a813a5327..000000000 --- a/hw/bsp/max32690/boards/max32690evkit/board.mk +++ /dev/null @@ -1 +0,0 @@ -# No specific build requirements for the board. diff --git a/hw/bsp/max32690/family.c b/hw/bsp/max32690/family.c deleted file mode 100644 index 7ba5fbef3..000000000 --- a/hw/bsp/max32690/family.c +++ /dev/null @@ -1,175 +0,0 @@ -/* - * The MIT License (MIT) - * - * Copyright (c) 2024 Brent Kowal (Analog Devices, Inc) - * - * Permission is hereby granted, free of charge, to any person obtaining a copy - * of this software and associated documentation files (the "Software"), to deal - * in the Software without restriction, including without limitation the rights - * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell - * copies of the Software, and to permit persons to whom the Software is - * furnished to do so, subject to the following conditions: - * - * The above copyright notice and this permission notice shall be included in - * all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR - * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, - * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE - * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER - * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, - * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN - * THE SOFTWARE. - * - * This file is part of the TinyUSB stack. - */ - -/* metadata: - manufacturer: Analog Devices -*/ - -#ifdef __GNUC__ -#pragma GCC diagnostic push -#pragma GCC diagnostic ignored "-Wstrict-prototypes" // _mxc_crit_get_state() -#endif - -#include "gpio.h" -#include "mxc_sys.h" -#include "mcr_regs.h" -#include "mxc_device.h" -#include "uart.h" - -#ifdef __GNUC__ -#pragma GCC diagnostic pop -#endif - -#include "board.h" -#include "bsp/board_api.h" - - -//--------------------------------------------------------------------+ -// Forward USB interrupt events to TinyUSB IRQ Handler -//--------------------------------------------------------------------+ -void USB_IRQHandler(void) { - tud_int_handler(0); -} - -//--------------------------------------------------------------------+ -// MACRO TYPEDEF CONSTANT ENUM -//--------------------------------------------------------------------+ -mxc_uart_regs_t *ConsoleUart = MXC_UART_GET_UART(UART_NUM); - -void board_init(void) { -#if CFG_TUSB_OS == OPT_OS_NONE - // 1ms tick timer - SysTick_Config(SystemCoreClock / 1000); -#elif CFG_TUSB_OS == OPT_OS_FREERTOS - // If freeRTOS is used, IRQ priority is limit by max syscall ( smaller is higher ) - NVIC_SetPriority(USB_IRQn, configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY); -#endif - mxc_gpio_cfg_t gpioConfig; - - // LED - gpioConfig.drvstr = MXC_GPIO_DRVSTR_0; - gpioConfig.func = MXC_GPIO_FUNC_OUT; - gpioConfig.mask = LED_PIN; - gpioConfig.pad = MXC_GPIO_PAD_NONE; - gpioConfig.port = LED_PORT; - gpioConfig.vssel = LED_VDDIO; - MXC_GPIO_Config(&gpioConfig); - board_led_write(false); - - // Button - gpioConfig.drvstr = MXC_GPIO_DRVSTR_0; - gpioConfig.func = MXC_GPIO_FUNC_IN; - gpioConfig.mask = BUTTON_PIN; - gpioConfig.pad = BUTTON_PULL; - gpioConfig.port = BUTTON_PORT; - gpioConfig.vssel = MXC_GPIO_VSSEL_VDDIO; - MXC_GPIO_Config(&gpioConfig); - - // UART - MXC_UART_Init(ConsoleUart, CFG_BOARD_UART_BAUDRATE, MXC_UART_IBRO_CLK); - - //USB - MXC_SYS_ClockSourceEnable(MXC_SYS_CLOCK_IPO); - MXC_MCR->ldoctrl |= MXC_F_MCR_LDOCTRL_0P9EN; - MXC_SYS_ClockEnable(MXC_SYS_PERIPH_CLOCK_USB); - MXC_SYS_Reset_Periph(MXC_SYS_RESET0_USB); -} - -//--------------------------------------------------------------------+ -// Board porting API -//--------------------------------------------------------------------+ - -void board_led_write(bool state) { -#if LED_STATE_ON - state = !state; -#endif - if (state) { - MXC_GPIO_OutClr(LED_PORT, LED_PIN); - } else { - MXC_GPIO_OutSet(LED_PORT, LED_PIN); - } -} - -uint32_t board_button_read(void) { - uint32_t state = MXC_GPIO_InGet(BUTTON_PORT, BUTTON_PIN) ? 1 : 0; - return BUTTON_STATE_ACTIVE == state; -} - -size_t board_get_unique_id(uint8_t id[], size_t max_len) { - uint8_t hw_id[MXC_SYS_USN_CHECKSUM_LEN];//USN Buffer - /* All other 2nd parameter is optional checksum buffer */ - MXC_SYS_GetUSN(hw_id, NULL); - - size_t act_len = TU_MIN(max_len, MXC_SYS_USN_LEN); - memcpy(id, hw_id, act_len); - return act_len; -} - -int board_uart_read(uint8_t *buf, int len) { - int uart_val; - int act_len = 0; - - while (act_len < len) { - if ((uart_val = MXC_UART_ReadCharacterRaw(ConsoleUart)) == E_UNDERFLOW) { - break; - } else { - *buf++ = (uint8_t) uart_val; - act_len++; - } - } - return act_len; -} - -int board_uart_write(void const *buf, int len) { - int act_len = 0; - const uint8_t *ch_ptr = (const uint8_t *) buf; - while (act_len < len) { - MXC_UART_WriteCharacter(ConsoleUart, *ch_ptr++); - act_len++; - } - return len; -} - -#if CFG_TUSB_OS == OPT_OS_NONE -volatile uint32_t system_ticks = 0; - -void SysTick_Handler(void) { - system_ticks++; -} - -uint32_t board_millis(void) { - return system_ticks; -} -#endif - -void HardFault_Handler(void) { - __asm("BKPT #0\n"); -} - -// Required by __libc_init_array in startup code if we are compiling using -// -nostdlib/-nostartfiles. -void _init(void) { -} diff --git a/hw/bsp/max32690/family.cmake b/hw/bsp/max32690/family.cmake deleted file mode 100644 index 0d544d9e6..000000000 --- a/hw/bsp/max32690/family.cmake +++ /dev/null @@ -1,152 +0,0 @@ -include_guard() - -set(MAX32_PERIPH ${TOP}/hw/mcu/analog/max32/Libraries/PeriphDrivers) -set(MAX32_CMSIS ${TOP}/hw/mcu/analog/max32/Libraries/CMSIS) -set(CMSIS_5 ${TOP}/lib/CMSIS_5) - -# include board specific -include(${CMAKE_CURRENT_LIST_DIR}/boards/${BOARD}/board.cmake) - -# Get the linker file from current location (family) -set(LD_FILE_GNU ${CMAKE_CURRENT_LIST_DIR}/max32690.ld) -set(LD_FILE_Clang ${LD_FILE_GNU}) - -# toolchain set up -set(CMAKE_SYSTEM_CPU cortex-m4 CACHE INTERNAL "System Processor") -set(CMAKE_TOOLCHAIN_FILE ${TOP}/examples/build_system/cmake/toolchain/arm_${TOOLCHAIN}.cmake) -set(JLINK_DEVICE max32690) -set(OPENOCD_OPTION "-f interface/cmsis-dap.cfg -f target/max32690.cfg") - -set(FAMILY_MCUS MAX32690 CACHE INTERNAL "") - -function(update_board TARGET) - target_compile_definitions(${TARGET} PUBLIC - TARGET=MAX32690 - TARGET_REV=0x4131 - MXC_ASSERT_ENABLE - MAX32690 - FLASH_ORIGIN=0x10000000 - FLASH_SIZE=0x340000 - SRAM_ORIGIN=0x20000000 - SRAM_SIZE=0x100000 - IAR_PRAGMAS=0 - CFG_TUSB_MCU=OPT_MCU_MAX32690 - BOARD_TUD_MAX_SPEED=OPT_MODE_HIGH_SPEED - ) -endfunction() - -#------------------------------------ -# BOARD_TARGET -#------------------------------------ -# only need to be built ONCE for all examples -function(add_board_target BOARD_TARGET) - if (TARGET ${BOARD_TARGET}) - return() - endif () - - # Startup & Linker script - set(STARTUP_FILE_GNU ${MAX32_CMSIS}/Device/Maxim/MAX32690/Source/GCC/startup_max32690.S) - set(STARTUP_FILE_Clang ${STARTUP_FILE_GNU}) - - set(PERIPH_SRC ${MAX32_PERIPH}/Source) - add_library(${BOARD_TARGET} STATIC - ${MAX32_CMSIS}/Device/Maxim/MAX32690/Source/heap.c - ${MAX32_CMSIS}/Device/Maxim/MAX32690/Source/system_max32690.c - ${PERIPH_SRC}/SYS/mxc_assert.c - ${PERIPH_SRC}/SYS/mxc_delay.c - ${PERIPH_SRC}/SYS/mxc_lock.c - ${PERIPH_SRC}/SYS/nvic_table.c - ${PERIPH_SRC}/SYS/pins_me18.c - ${PERIPH_SRC}/SYS/sys_me18.c - ${PERIPH_SRC}/CTB/ctb_me18.c - ${PERIPH_SRC}/CTB/ctb_reva.c - ${PERIPH_SRC}/CTB/ctb_common.c - ${PERIPH_SRC}/FLC/flc_common.c - ${PERIPH_SRC}/FLC/flc_me18.c - ${PERIPH_SRC}/FLC/flc_reva.c - ${PERIPH_SRC}/GPIO/gpio_common.c - ${PERIPH_SRC}/GPIO/gpio_me18.c - ${PERIPH_SRC}/GPIO/gpio_reva.c - ${PERIPH_SRC}/ICC/icc_me18.c - ${PERIPH_SRC}/ICC/icc_reva.c - ${PERIPH_SRC}/UART/uart_common.c - ${PERIPH_SRC}/UART/uart_me18.c - ${PERIPH_SRC}/UART/uart_revb.c - ${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} - ) - target_include_directories(${BOARD_TARGET} PUBLIC - ${CMAKE_CURRENT_FUNCTION_LIST_DIR} - ${MAX32_CMSIS}/Include - ${MAX32_CMSIS}/Device/Maxim/MAX32690/Include - ${MAX32_PERIPH}/Include/MAX32690 - ${PERIPH_SRC}/SYS - ${PERIPH_SRC}/GPIO - ${PERIPH_SRC}/CTB - ${PERIPH_SRC}/ICC - ${PERIPH_SRC}/FLC - ${PERIPH_SRC}/UART - ) - - target_compile_options(${BOARD_TARGET} PRIVATE - -Wno-error=strict-prototypes - ) - update_board(${BOARD_TARGET}) - - if (CMAKE_C_COMPILER_ID STREQUAL "GNU") - target_link_options(${BOARD_TARGET} PUBLIC - "LINKER:--script=${LD_FILE_GNU}" - -nostartfiles - --specs=nosys.specs --specs=nano.specs - ) - elseif (CMAKE_C_COMPILER_ID STREQUAL "Clang") - target_link_options(${BOARD_TARGET} PUBLIC - "LINKER:--script=${LD_FILE_Clang}" - ) - endif () -endfunction() - - -#------------------------------------ -# Functions -#------------------------------------ -function(family_configure_example TARGET RTOS) - family_configure_common(${TARGET} ${RTOS}) - - # Board target - add_board_target(board_${BOARD}) - - #---------- Port Specific ---------- - # These files are built for each example since it depends on example's tusb_config.h - target_sources(${TARGET} PUBLIC - # BSP - ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/family.c - ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/../board.c - ) - target_include_directories(${TARGET} PUBLIC - # family, hw, board - ${CMAKE_CURRENT_FUNCTION_LIST_DIR} - ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/../../ - ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/boards/${BOARD} - ) - - # Add TinyUSB target and port source - family_add_tinyusb(${TARGET} OPT_MCU_MAX32690) - target_sources(${TARGET} PUBLIC - ${TOP}/src/portable/mentor/musb/dcd_musb.c - ) - target_compile_options(${TARGET} PRIVATE - -Wno-error=strict-prototypes - ) - - target_link_libraries(${TARGET} PUBLIC board_${BOARD}) - target_compile_options(${TARGET} PRIVATE - -Wno-error=strict-prototypes - ) - - - - # Flashing - family_add_bin_hex(${TARGET}) - family_flash_jlink(${TARGET}) - family_flash_openocd_adi(${TARGET}) -endfunction() diff --git a/hw/bsp/max32690/family.mk b/hw/bsp/max32690/family.mk deleted file mode 100644 index d4df8ef2f..000000000 --- a/hw/bsp/max32690/family.mk +++ /dev/null @@ -1,101 +0,0 @@ -DEPS_SUBMODULES += lib/CMSIS_5 hw/mcu/analog/max32 - -# Important locations in the hw support for MCU -MAX32_CMSIS = hw/mcu/analog/max32/Libraries/CMSIS -MAX32_PERIPH = hw/mcu/analog/max32/Libraries/PeriphDrivers - -# Add any board specific make rules -include $(TOP)/$(BOARD_PATH)/board.mk - -CPU_CORE ?= cortex-m4 -PORT ?= 0 - -# GCC -SRC_S_GCC += $(MAX32_CMSIS)/Device/Maxim/MAX32690/Source/GCC/startup_max32690.S -LD_FILE = $(FAMILY_PATH)/max32690.ld - -# -------------- -# Compiler Flags -# -------------- -# Flags for the MAX32690 SDK -CFLAGS += -DTARGET=MAX32690 \ - -DTARGET_REV=0x4131 \ - -DMXC_ASSERT_ENABLE \ - -DMAX32690 \ - -DFLASH_ORIGIN=0x10000000 \ - -DFLASH_SIZE=0x340000 \ - -DSRAM_ORIGIN=0x20000000 \ - -DSRAM_SIZE=0x100000 \ - -DIAR_PRAGMAS=0 - -# Flags for TUSB features -CFLAGS += \ - -DCFG_TUSB_MCU=OPT_MCU_MAX32690 \ - -DBOARD_TUD_MAX_SPEED=OPT_MODE_HIGH_SPEED - -# mcu driver cause following warnings -CFLAGS += -Wno-error=unused-parameter \ - -Wno-error=strict-prototypes \ - -Wno-error=old-style-declaration \ - -Wno-error=sign-compare \ - -Wno-error=cast-qual \ - -Wno-lto-type-mismatch - -LDFLAGS_GCC += -nostartfiles --specs=nosys.specs --specs=nano.specs - -# For flash-jlink target -JLINK_DEVICE = max32690 - -# flash target using Jlink by default -flash: flash-jlink - -# Optional flash option when running within an installed MSDK to use OpenOCD -# Mainline OpenOCD does not yet have the MAX32's flash algorithm integrated. -# If the MSDK is installed, flash-msdk can be run to utilize the the modified -# openocd with the algorithms -MAXIM_PATH := $(subst \,/,$(MAXIM_PATH)) -flash-msdk: $(BUILD)/$(PROJECT).elf - $(MAXIM_PATH)/Tools/OpenOCD/openocd -s $(MAXIM_PATH)/Tools/OpenOCD/scripts \ - -f interface/cmsis-dap.cfg -f target/max32690.cfg \ - -c "program $(BUILD)/$(PROJECT).elf verify; init; reset; exit" - -# ----------------- -# Sources & Include -# ----------------- -PERIPH_SRC = $(TOP)/$(MAX32_PERIPH)/Source -SRC_C += \ - src/portable/mentor/musb/dcd_musb.c \ - $(MAX32_CMSIS)/Device/Maxim/MAX32690/Source/heap.c \ - $(MAX32_CMSIS)/Device/Maxim/MAX32690/Source/system_max32690.c \ - $(PERIPH_SRC)/SYS/mxc_assert.c \ - $(PERIPH_SRC)/SYS/mxc_delay.c \ - $(PERIPH_SRC)/SYS/mxc_lock.c \ - $(PERIPH_SRC)/SYS/nvic_table.c \ - $(PERIPH_SRC)/SYS/pins_me18.c \ - $(PERIPH_SRC)/SYS/sys_me18.c \ - $(PERIPH_SRC)/CTB/ctb_me18.c \ - $(PERIPH_SRC)/CTB/ctb_reva.c \ - $(PERIPH_SRC)/CTB/ctb_common.c \ - $(PERIPH_SRC)/FLC/flc_common.c \ - $(PERIPH_SRC)/FLC/flc_me18.c \ - $(PERIPH_SRC)/FLC/flc_reva.c \ - $(PERIPH_SRC)/GPIO/gpio_common.c \ - $(PERIPH_SRC)/GPIO/gpio_me18.c \ - $(PERIPH_SRC)/GPIO/gpio_reva.c \ - $(PERIPH_SRC)/ICC/icc_me18.c \ - $(PERIPH_SRC)/ICC/icc_reva.c \ - $(PERIPH_SRC)/UART/uart_common.c \ - $(PERIPH_SRC)/UART/uart_me18.c \ - $(PERIPH_SRC)/UART/uart_revb.c \ - -INC += \ - $(TOP)/$(BOARD_PATH) \ - $(TOP)/$(MAX32_CMSIS)/Include \ - $(TOP)/$(MAX32_CMSIS)/Device/Maxim/MAX32690/Include \ - $(TOP)/$(MAX32_PERIPH)/Include/MAX32690 \ - $(PERIPH_SRC)/SYS \ - $(PERIPH_SRC)/GPIO \ - $(PERIPH_SRC)/CTB \ - $(PERIPH_SRC)/ICC \ - $(PERIPH_SRC)/FLC \ - $(PERIPH_SRC)/UART diff --git a/hw/bsp/max32690/max32690.ld b/hw/bsp/max32690/max32690.ld deleted file mode 100644 index 64b906a54..000000000 --- a/hw/bsp/max32690/max32690.ld +++ /dev/null @@ -1,164 +0,0 @@ -MEMORY { - ROM (rx) : ORIGIN = 0x00000000, LENGTH = 0x00020000 /* 128kB ROM */ - FLASH (rx) : ORIGIN = 0x10000000, LENGTH = 0x00340000 - SRAM (rwx) : ORIGIN = 0x20000000, LENGTH = 0x00100000 - - /* - * Note that CS0/CS1 address mappings may be reversed using MXC_HPC->mbr0 and ->mbr1 - * The following mappings are selected for simplicity - */ - HPB_CS0 (rwx) : ORIGIN = 0x60000000, LENGTH = 0x10000000 /* External Hyperbus/Xccelabus chip select 0 */ - HPB_CS1 (rwx) : ORIGIN = 0x70000000, LENGTH = 0x10000000 /* External Hyperbus/Xccelabus chip select 1 */ -} - -SECTIONS { - .rom : - { - KEEP(*(.rom_vector)) - *(.rom_handlers*) - } > ROM - - .text : - { - _text = .; - KEEP(*(.isr_vector)) - EXCLUDE_FILE (*riscv.o) *(.text*) /* program code, exclude RISCV code */ - *(.rodata*) /* read-only data: "const" */ - - KEEP(*(.init)) - KEEP(*(.fini)) - - /* .ctors */ - *crtbegin.o(.ctors) - *crtbegin?.o(.ctors) - *(EXCLUDE_FILE(*crtend?.o *crtend.o) .ctors) - *(SORT(.ctors.*)) - *(.ctors) - - /* .dtors */ - *crtbegin.o(.dtors) - *crtbegin?.o(.dtors) - *(EXCLUDE_FILE(*crtend?.o *crtend.o) .dtors) - *(SORT(.dtors.*)) - *(.dtors) - - /* C++ Exception handling */ - KEEP(*(.eh_frame*)) - _etext = .; - } > FLASH - - .ARM.extab : - { - *(.ARM.extab* .gnu.linkonce.armextab.*) - } > FLASH - - /* These sections allow code to be compiled/linked for HPB addresses, but reside in - * flash until copied by code to the external HPB flash device - */ - .hpb_cs0_section : - { - __hpb_cs0_start = ABSOLUTE(.); - KEEP(*(.hpb_cs0_section*)) - } > HPB_CS0 AT>FLASH - - __load_start_hpb_cs0 = LOADADDR(.hpb_cs0_section); - __load_length_hpb_cs0 = SIZEOF(.hpb_cs0_section); - - .hpb_cs1_section : - { - __hpb_cs1_start = ABSOLUTE(.); - KEEP(*(.hpb_cs1_section*)) - } > HPB_CS1 AT>FLASH - - __load_start_hpb_cs1 = LOADADDR(.hpb_cs1_section); - __load_length_hpb_cs1 = SIZEOF(.hpb_cs1_section); - - /* Binary import */ - .bin_storage : - { - FILL(0xFF) - _bin_start_ = .; - KEEP(*(.bin_storage_img)) - _bin_end_ = .; - . = ALIGN(4); - } > FLASH - - /* it's used for C++ exception handling */ - /* we need to keep this to avoid overlapping */ - .ARM.exidx : - { - __exidx_start = .; - *(.ARM.exidx* .gnu.linkonce.armexidx.*) - __exidx_end = .; - } > FLASH - - .data : - { - _data = ALIGN(., 4); - *(vtable) - *(.data*) /*read-write initialized data: initialized global variable*/ - - /* These array sections are used by __libc_init_array to call static C++ constructors */ - . = ALIGN(4); - /* preinit data */ - PROVIDE_HIDDEN (__preinit_array_start = .); - KEEP(*(.preinit_array)) - PROVIDE_HIDDEN (__preinit_array_end = .); - - . = ALIGN(4); - /* init data */ - PROVIDE_HIDDEN (__init_array_start = .); - KEEP(*(SORT(.init_array.*))) - KEEP(*(.init_array)) - PROVIDE_HIDDEN (__init_array_end = .); - - . = ALIGN(4); - /* finit data */ - PROVIDE_HIDDEN (__fini_array_start = .); - KEEP(*(SORT(.fini_array.*))) - KEEP(*(.fini_array)) - PROVIDE_HIDDEN (__fini_array_end = .); - - /* Run the flash programming functions from SRAM */ - *(.flashprog) - - _edata = ALIGN(., 4); - } > SRAM AT>FLASH - __load_data = LOADADDR(.data); - - .bss : - { - . = ALIGN(4); - _bss = .; - *(.bss*) /*read-write zero initialized data: uninitialized global variable*/ - *(COMMON) - _ebss = ALIGN(., 4); - } > SRAM - - /* Set stack top to end of RAM, and stack limit move down by - * size of stack_dummy section */ - __StackTop = ORIGIN(SRAM) + LENGTH(SRAM); - __StackLimit = __StackTop - SIZEOF(.stack_dummy); - - /* .stack_dummy section doesn't contains any symbols. It is only - * used for linker to calculate size of stack sections, and assign - * values to stack symbols later */ - .stack_dummy (COPY): - { - *(.stack*) - } > SRAM - - .heap (COPY): - { - . = ALIGN(4); - PROVIDE ( end = . ); - PROVIDE ( _end = . ); - *(.heap*) - __HeapLimit = ABSOLUTE(__StackLimit); - } > SRAM - - PROVIDE(__stack = __StackTop); - - /* Check if data + heap + stack exceeds RAM limit */ - ASSERT(__StackLimit >= _ebss, "region RAM overflowed with stack") -} diff --git a/hw/bsp/max78002/FreeRTOSConfig/FreeRTOSConfig.h b/hw/bsp/max78002/FreeRTOSConfig/FreeRTOSConfig.h deleted file mode 100644 index e5a76af85..000000000 --- a/hw/bsp/max78002/FreeRTOSConfig/FreeRTOSConfig.h +++ /dev/null @@ -1,149 +0,0 @@ -/* - * FreeRTOS Kernel V10.0.0 - * Copyright (C) 2017 Amazon.com, Inc. or its affiliates. All Rights Reserved. - * - * Permission is hereby granted, free of charge, to any person obtaining a copy of - * this software and associated documentation files (the "Software"), to deal in - * the Software without restriction, including without limitation the rights to - * use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of - * the Software, and to permit persons to whom the Software is furnished to do so, - * subject to the following conditions: - * - * The above copyright notice and this permission notice shall be included in all - * copies or substantial portions of the Software. If you wish to use our Amazon - * FreeRTOS name, please do so in a fair use way that does not cause confusion. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR - * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS - * FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR - * COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER - * IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN - * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. - * - * http://www.FreeRTOS.org - * http://aws.amazon.com/freertos - * - * 1 tab == 4 spaces! - */ - - -#ifndef FREERTOS_CONFIG_H -#define FREERTOS_CONFIG_H - -/*----------------------------------------------------------- - * Application specific definitions. - * - * These definitions should be adjusted for your particular hardware and - * application requirements. - * - * THESE PARAMETERS ARE DESCRIBED WITHIN THE 'CONFIGURATION' SECTION OF THE - * FreeRTOS API DOCUMENTATION AVAILABLE ON THE FreeRTOS.org WEB SITE. - * - * See http://www.freertos.org/a00110.html. - *----------------------------------------------------------*/ - -// skip if included from IAR assembler -#ifndef __IASMARM__ - #include "mxc_device.h" -#endif - -/* Cortex M23/M33 port configuration. */ -#define configENABLE_MPU 0 -#define configENABLE_FPU 1 -#define configENABLE_TRUSTZONE 0 -#define configMINIMAL_SECURE_STACK_SIZE (1024) - -#define configUSE_PREEMPTION 1 -#define configUSE_PORT_OPTIMISED_TASK_SELECTION 0 -#define configCPU_CLOCK_HZ SystemCoreClock -#define configTICK_RATE_HZ ( 1000 ) -#define configMAX_PRIORITIES ( 5 ) -#define configMINIMAL_STACK_SIZE ( 128 ) -#define configTOTAL_HEAP_SIZE ( configSUPPORT_DYNAMIC_ALLOCATION*4*1024 ) -#define configMAX_TASK_NAME_LEN 16 -#define configUSE_16_BIT_TICKS 0 -#define configIDLE_SHOULD_YIELD 1 -#define configUSE_MUTEXES 1 -#define configUSE_RECURSIVE_MUTEXES 1 -#define configUSE_COUNTING_SEMAPHORES 1 -#define configQUEUE_REGISTRY_SIZE 4 -#define configUSE_QUEUE_SETS 0 -#define configUSE_TIME_SLICING 0 -#define configUSE_NEWLIB_REENTRANT 0 -#define configENABLE_BACKWARD_COMPATIBILITY 1 -#define configSTACK_ALLOCATION_FROM_SEPARATE_HEAP 0 - -#define configSUPPORT_STATIC_ALLOCATION 1 -#define configSUPPORT_DYNAMIC_ALLOCATION 0 - -/* Hook function related definitions. */ -#define configUSE_IDLE_HOOK 0 -#define configUSE_TICK_HOOK 0 -#define configUSE_MALLOC_FAILED_HOOK 0 // cause nested extern warning -#define configCHECK_FOR_STACK_OVERFLOW 2 -#define configCHECK_HANDLER_INSTALLATION 0 - -/* Run time and task stats gathering related definitions. */ -#define configGENERATE_RUN_TIME_STATS 0 -#define configRECORD_STACK_HIGH_ADDRESS 1 -#define configUSE_TRACE_FACILITY 1 // legacy trace -#define configUSE_STATS_FORMATTING_FUNCTIONS 0 - -/* Co-routine definitions. */ -#define configUSE_CO_ROUTINES 0 -#define configMAX_CO_ROUTINE_PRIORITIES 2 - -/* Software timer related definitions. */ -#define configUSE_TIMERS 1 -#define configTIMER_TASK_PRIORITY (configMAX_PRIORITIES-2) -#define configTIMER_QUEUE_LENGTH 32 -#define configTIMER_TASK_STACK_DEPTH configMINIMAL_STACK_SIZE - -/* Optional functions - most linkers will remove unused functions anyway. */ -#define INCLUDE_vTaskPrioritySet 0 -#define INCLUDE_uxTaskPriorityGet 0 -#define INCLUDE_vTaskDelete 0 -#define INCLUDE_vTaskSuspend 1 // required for queue, semaphore, mutex to be blocked indefinitely with portMAX_DELAY -#define INCLUDE_xResumeFromISR 0 -#define INCLUDE_vTaskDelayUntil 1 -#define INCLUDE_vTaskDelay 1 -#define INCLUDE_xTaskGetSchedulerState 0 -#define INCLUDE_xTaskGetCurrentTaskHandle 1 -#define INCLUDE_uxTaskGetStackHighWaterMark 0 -#define INCLUDE_xTaskGetIdleTaskHandle 0 -#define INCLUDE_xTimerGetTimerDaemonTaskHandle 0 -#define INCLUDE_pcTaskGetTaskName 0 -#define INCLUDE_eTaskGetState 0 -#define INCLUDE_xEventGroupSetBitFromISR 0 -#define INCLUDE_xTimerPendFunctionCall 0 - -/* FreeRTOS hooks to NVIC vectors */ -#define xPortPendSVHandler PendSV_Handler -#define xPortSysTickHandler SysTick_Handler -#define vPortSVCHandler SVC_Handler - -//--------------------------------------------------------------------+ -// Interrupt nesting behavior configuration. -//--------------------------------------------------------------------+ - -// For Cortex-M specific: __NVIC_PRIO_BITS is defined in mcu header -#define configPRIO_BITS __NVIC_PRIO_BITS - -/* The lowest interrupt priority that can be used in a call to a "set priority" function. */ -#define configLIBRARY_LOWEST_INTERRUPT_PRIORITY ((1<-jlink` target for CMake. - -The Evaluation Kit is shipped with a CMSIS-DAP compatible debug probe. However, -at the time of writing, the necessary flashing algorithms for OpenOCD have not -yet been incorporated into the OpenOCD master branch. To utilize the provided -debug probes, please install the bundled MSDK package which includes the -appropriate OpenOCD modifications. To leverage this OpenOCD instance, run the -`flash-msdk` Makefile rule, or `-msdk` CMake target. diff --git a/hw/bsp/max78002/boards/max78002evkit/board.cmake b/hw/bsp/max78002/boards/max78002evkit/board.cmake deleted file mode 100644 index 9dc6962eb..000000000 --- a/hw/bsp/max78002/boards/max78002evkit/board.cmake +++ /dev/null @@ -1 +0,0 @@ -# Nothing to be done at the board level diff --git a/hw/bsp/max78002/boards/max78002evkit/board.h b/hw/bsp/max78002/boards/max78002evkit/board.h deleted file mode 100644 index 85d55d7de..000000000 --- a/hw/bsp/max78002/boards/max78002evkit/board.h +++ /dev/null @@ -1,63 +0,0 @@ -/* - * The MIT License (MIT) - * - * Copyright (c) 2024, Brent Kowal (Analog Devices, Inc) - * - * Permission is hereby granted, free of charge, to any person obtaining a copy - * of this software and associated documentation files (the "Software"), to deal - * in the Software without restriction, including without limitation the rights - * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell - * copies of the Software, and to permit persons to whom the Software is - * furnished to do so, subject to the following conditions: - * - * The above copyright notice and this permission notice shall be included in - * all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR - * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, - * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE - * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER - * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, - * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN - * THE SOFTWARE. - * - * This file is part of the TinyUSB stack. - */ - -/* metadata: - name: MAX78002 EVKIT - url: https://www.analog.com/en/resources/evaluation-hardware-and-software/evaluation-boards-kits/max78002evkit.html -*/ - -#ifndef BOARD_H_ -#define BOARD_H_ - -#include "gpio.h" -#include "mxc_sys.h" - -#ifdef __cplusplus -extern "C" { -#endif - -// LED -#define LED_PORT MXC_GPIO2 -#define LED_PIN MXC_GPIO_PIN_4 -#define LED_VDDIO MXC_GPIO_VSSEL_VDDIOH -#define LED_STATE_ON 1 - -// Button -#define BUTTON_PORT MXC_GPIO2 -#define BUTTON_PIN MXC_GPIO_PIN_6 -#define BUTTON_PULL MXC_GPIO_PAD_PULL_UP -#define BUTTON_STATE_ACTIVE 0 - -// UART Enable for EvKit's Integrated FTDI Adapter. Pin Mux handled by the HAL -#define UART_NUM 0 -#define UART_PORT MXC_GPIO0 -#define UART_VDDIO_BITS 0xF - -#ifdef __cplusplus -} -#endif - -#endif /* BOARD_H_ */ diff --git a/hw/bsp/max78002/boards/max78002evkit/board.mk b/hw/bsp/max78002/boards/max78002evkit/board.mk deleted file mode 100644 index a813a5327..000000000 --- a/hw/bsp/max78002/boards/max78002evkit/board.mk +++ /dev/null @@ -1 +0,0 @@ -# No specific build requirements for the board. diff --git a/hw/bsp/max78002/family.c b/hw/bsp/max78002/family.c deleted file mode 100644 index 5c23f40f9..000000000 --- a/hw/bsp/max78002/family.c +++ /dev/null @@ -1,173 +0,0 @@ -/* - * The MIT License (MIT) - * - * Copyright (c) 2024 Brent Kowal (Analog Devices, Inc) - * - * Permission is hereby granted, free of charge, to any person obtaining a copy - * of this software and associated documentation files (the "Software"), to deal - * in the Software without restriction, including without limitation the rights - * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell - * copies of the Software, and to permit persons to whom the Software is - * furnished to do so, subject to the following conditions: - * - * The above copyright notice and this permission notice shall be included in - * all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR - * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, - * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE - * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER - * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, - * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN - * THE SOFTWARE. - * - * This file is part of the TinyUSB stack. - */ - -/* metadata: - manufacturer: Analog Devices -*/ - -#ifdef __GNUC__ -#pragma GCC diagnostic push -#pragma GCC diagnostic ignored "-Wstrict-prototypes" // _mxc_crit_get_state() -#endif - -#include "gpio.h" -#include "mxc_sys.h" -#include "mcr_regs.h" -#include "mxc_device.h" -#include "uart.h" - -#ifdef __GNUC__ -#pragma GCC diagnostic pop -#endif - -#include "board.h" -#include "bsp/board_api.h" - -//--------------------------------------------------------------------+ -// Forward USB interrupt events to TinyUSB IRQ Handler -//--------------------------------------------------------------------+ -void USB_IRQHandler(void) { - tud_int_handler(0); -} - -//--------------------------------------------------------------------+ -// MACRO TYPEDEF CONSTANT ENUM -//--------------------------------------------------------------------+ -mxc_uart_regs_t *ConsoleUart = MXC_UART_GET_UART(UART_NUM); - -void board_init(void) { -#if CFG_TUSB_OS == OPT_OS_NONE - // 1ms tick timer - SysTick_Config(SystemCoreClock / 1000); -#elif CFG_TUSB_OS == OPT_OS_FREERTOS - // If freeRTOS is used, IRQ priority is limit by max syscall ( smaller is higher ) - NVIC_SetPriority(USB_IRQn, configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY); -#endif - mxc_gpio_cfg_t gpioConfig; - - // LED - gpioConfig.drvstr = MXC_GPIO_DRVSTR_0; - gpioConfig.func = MXC_GPIO_FUNC_OUT; - gpioConfig.mask = LED_PIN; - gpioConfig.pad = MXC_GPIO_PAD_NONE; - gpioConfig.port = LED_PORT; - gpioConfig.vssel = LED_VDDIO; - MXC_GPIO_Config(&gpioConfig); - board_led_write(false); - - // Button - gpioConfig.drvstr = MXC_GPIO_DRVSTR_0; - gpioConfig.func = MXC_GPIO_FUNC_IN; - gpioConfig.mask = BUTTON_PIN; - gpioConfig.pad = BUTTON_PULL; - gpioConfig.port = BUTTON_PORT; - gpioConfig.vssel = MXC_GPIO_VSSEL_VDDIO; - MXC_GPIO_Config(&gpioConfig); - - // UART - MXC_UART_Init(ConsoleUart, CFG_BOARD_UART_BAUDRATE, MXC_UART_IBRO_CLK); - UART_PORT->vssel |= UART_VDDIO_BITS; //Set necessary bits to 3.3V - - //USB - MXC_MCR->ldoctrl |= MXC_F_MCR_LDOCTRL_0P9EN; - MXC_SYS_ClockEnable(MXC_SYS_PERIPH_CLOCK_USB); -} - -//--------------------------------------------------------------------+ -// Board porting API -//--------------------------------------------------------------------+ - -void board_led_write(bool state) { -#if LED_STATE_ON - state = !state; -#endif - if (state) { - MXC_GPIO_OutClr(LED_PORT, LED_PIN); - } else { - MXC_GPIO_OutSet(LED_PORT, LED_PIN); - } -} - -uint32_t board_button_read(void) { - uint32_t state = MXC_GPIO_InGet(BUTTON_PORT, BUTTON_PIN) ? 1 : 0; - return BUTTON_STATE_ACTIVE == state; -} - -size_t board_get_unique_id(uint8_t id[], size_t max_len) { - uint8_t hw_id[MXC_SYS_USN_CHECKSUM_LEN];//USN Buffer - /* All other 2nd parameter is optional checksum buffer */ - MXC_SYS_GetUSN(hw_id, NULL); - - size_t act_len = TU_MIN(max_len, MXC_SYS_USN_LEN); - memcpy(id, hw_id, act_len); - return act_len; -} - -int board_uart_read(uint8_t *buf, int len) { - int uart_val; - int act_len = 0; - - while (act_len < len) { - if ((uart_val = MXC_UART_ReadCharacterRaw(ConsoleUart)) == E_UNDERFLOW) { - break; - } else { - *buf++ = (uint8_t) uart_val; - act_len++; - } - } - return act_len; -} - -int board_uart_write(void const *buf, int len) { - int act_len = 0; - const uint8_t *ch_ptr = (const uint8_t *) buf; - while (act_len < len) { - MXC_UART_WriteCharacter(ConsoleUart, *ch_ptr++); - act_len++; - } - return len; -} - -#if CFG_TUSB_OS == OPT_OS_NONE -volatile uint32_t system_ticks = 0; - -void SysTick_Handler(void) { - system_ticks++; -} - -uint32_t board_millis(void) { - return system_ticks; -} -#endif - -void HardFault_Handler(void) { - __asm("BKPT #0\n"); -} - -// Required by __libc_init_array in startup code if we are compiling using -// -nostdlib/-nostartfiles. -void _init(void) { -} diff --git a/hw/bsp/max78002/family.cmake b/hw/bsp/max78002/family.cmake deleted file mode 100644 index ce0fcfa08..000000000 --- a/hw/bsp/max78002/family.cmake +++ /dev/null @@ -1,166 +0,0 @@ -include_guard() - -set(MAX32_PERIPH ${TOP}/hw/mcu/analog/max32/Libraries/PeriphDrivers) -set(MAX32_CMSIS ${TOP}/hw/mcu/analog/max32/Libraries/CMSIS) -set(CMSIS_5 ${TOP}/lib/CMSIS_5) - -# include board specific -include(${CMAKE_CURRENT_LIST_DIR}/boards/${BOARD}/board.cmake) - -# Get the linker file from current location (family) -set(LD_FILE_GNU ${CMAKE_CURRENT_LIST_DIR}/max78002.ld) -set(LD_FILE_Clang ${LD_FILE_GNU}) - -# toolchain set up -set(CMAKE_SYSTEM_CPU cortex-m4 CACHE INTERNAL "System Processor") -set(CMAKE_TOOLCHAIN_FILE ${TOP}/examples/build_system/cmake/toolchain/arm_${TOOLCHAIN}.cmake) -set(JLINK_DEVICE max78000) - -set(FAMILY_MCUS MAX78002 CACHE INTERNAL "") - -function(update_board TARGET) - target_compile_definitions(${TARGET} PUBLIC - TARGET=MAX78002 - TARGET_REV=0x4131 - MXC_ASSERT_ENABLE - MAX78002 - IAR_PRAGMAS=0 - CFG_TUSB_MCU=OPT_MCU_MAX78002 - BOARD_TUD_MAX_SPEED=OPT_MODE_HIGH_SPEED - ) -endfunction() - -#------------------------------------ -# BOARD_TARGET -#------------------------------------ -# only need to be built ONCE for all examples -function(add_board_target BOARD_TARGET) - if (TARGET ${BOARD_TARGET}) - return() - endif () - - # Startup & Linker script - set(STARTUP_FILE_GNU ${MAX32_CMSIS}/Device/Maxim/MAX78002/Source/GCC/startup_max78002.S) - set(STARTUP_FILE_Clang ${STARTUP_FILE_GNU}) - - set(PERIPH_SRC ${MAX32_PERIPH}/Source) - add_library(${BOARD_TARGET} STATIC - ${MAX32_CMSIS}/Device/Maxim/MAX78002/Source/heap.c - ${MAX32_CMSIS}/Device/Maxim/MAX78002/Source/system_max78002.c - ${PERIPH_SRC}/SYS/mxc_assert.c - ${PERIPH_SRC}/SYS/mxc_delay.c - ${PERIPH_SRC}/SYS/mxc_lock.c - ${PERIPH_SRC}/SYS/nvic_table.c - ${PERIPH_SRC}/SYS/pins_ai87.c - ${PERIPH_SRC}/SYS/sys_ai87.c - ${PERIPH_SRC}/AES/aes_ai87.c - ${PERIPH_SRC}/AES/aes_revb.c - ${PERIPH_SRC}/FLC/flc_common.c - ${PERIPH_SRC}/FLC/flc_ai87.c - ${PERIPH_SRC}/FLC/flc_reva.c - ${PERIPH_SRC}/GPIO/gpio_common.c - ${PERIPH_SRC}/GPIO/gpio_ai87.c - ${PERIPH_SRC}/GPIO/gpio_reva.c - ${PERIPH_SRC}/ICC/icc_ai87.c - ${PERIPH_SRC}/ICC/icc_reva.c - ${PERIPH_SRC}/TRNG/trng_ai87.c - ${PERIPH_SRC}/TRNG/trng_revb.c - ${PERIPH_SRC}/UART/uart_common.c - ${PERIPH_SRC}/UART/uart_ai87.c - ${PERIPH_SRC}/UART/uart_revb.c - ${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} - ) - target_include_directories(${BOARD_TARGET} PUBLIC - ${CMAKE_CURRENT_FUNCTION_LIST_DIR} - ${MAX32_CMSIS}/Include - ${MAX32_CMSIS}/Device/Maxim/MAX78002/Include - ${MAX32_PERIPH}/Include/MAX78002 - ${PERIPH_SRC}/SYS - ${PERIPH_SRC}/GPIO - ${PERIPH_SRC}/AES - ${PERIPH_SRC}/TRNG - ${PERIPH_SRC}/ICC - ${PERIPH_SRC}/FLC - ${PERIPH_SRC}/UART - ) - - target_compile_options(${BOARD_TARGET} PRIVATE - -Wno-error=strict-prototypes - -Wno-error=redundant-decls - ) - update_board(${BOARD_TARGET}) - - if (CMAKE_C_COMPILER_ID STREQUAL "GNU") - target_link_options(${BOARD_TARGET} PUBLIC - "LINKER:--script=${LD_FILE_GNU}" - -nostartfiles - --specs=nosys.specs --specs=nano.specs - ) - elseif (CMAKE_C_COMPILER_ID STREQUAL "Clang") - target_link_options(${BOARD_TARGET} PUBLIC - "LINKER:--script=${LD_FILE_Clang}" - ) - endif () -endfunction() - - -#------------------------------------ -# Functions -#------------------------------------ -function(family_configure_example TARGET RTOS) - family_configure_common(${TARGET} ${RTOS}) - - # Board target - add_board_target(board_${BOARD}) - - #---------- Port Specific ---------- - # These files are built for each example since it depends on example's tusb_config.h - target_sources(${TARGET} PUBLIC - # BSP - ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/family.c - ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/../board.c - ) - target_include_directories(${TARGET} PUBLIC - # family, hw, board - ${CMAKE_CURRENT_FUNCTION_LIST_DIR} - ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/../../ - ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/boards/${BOARD} - ) - - target_compile_options(${TARGET} PRIVATE - -Wno-error=strict-prototypes - -Wno-error=redundant-decls - ) - - - # Add TinyUSB target and port source - family_add_tinyusb(${TARGET} OPT_MCU_MAX78002) - target_sources(${TARGET} PUBLIC - ${TOP}/src/portable/mentor/musb/dcd_musb.c - ) - target_link_libraries(${TARGET} PUBLIC board_${BOARD}) - target_compile_options(${TARGET} PRIVATE - -Wno-error=strict-prototypes - -Wno-error=redundant-decls - ) - - - - # Flashing - family_add_bin_hex(${TARGET}) - family_flash_jlink(${TARGET}) - family_flash_msdk(${TARGET}) -endfunction() - -# Add flash msdk target -function(family_flash_msdk TARGET) - set(MAXIM_PATH "$ENV{MAXIM_PATH}") - - add_custom_target(${TARGET}-msdk - DEPENDS ${TARGET} - COMMAND ${MAXIM_PATH}/Tools/OpenOCD/openocd -s ${MAXIM_PATH}/Tools/OpenOCD/scripts - -f interface/cmsis-dap.cfg -f target/max78002.cfg - -c "program $ verify; init; reset; exit" - VERBATIM - ) -endfunction() diff --git a/hw/bsp/max78002/family.mk b/hw/bsp/max78002/family.mk deleted file mode 100644 index 997816261..000000000 --- a/hw/bsp/max78002/family.mk +++ /dev/null @@ -1,99 +0,0 @@ -DEPS_SUBMODULES += lib/CMSIS_5 hw/mcu/analog/max32 - -# Important locations in the hw support for MCU -MAX32_CMSIS = hw/mcu/analog/max32/Libraries/CMSIS -MAX32_PERIPH = hw/mcu/analog/max32/Libraries/PeriphDrivers - -# Add any board specific make rules -include $(TOP)/$(BOARD_PATH)/board.mk - -CPU_CORE ?= cortex-m4 -PORT ?= 0 - -# GCC -SRC_S_GCC += $(MAX32_CMSIS)/Device/Maxim/MAX78002/Source/GCC/startup_max78002.S -LD_FILE = $(FAMILY_PATH)/max78002.ld - -# -------------- -# Compiler Flags -# -------------- -# Flags for the MAX78002 SDK -CFLAGS += -DTARGET=MAX78002 \ - -DTARGET_REV=0x4131 \ - -DMXC_ASSERT_ENABLE \ - -DMAX78002 \ - -DIAR_PRAGMAS=0 - -# Flags for TUSB features -CFLAGS += \ - -DCFG_TUSB_MCU=OPT_MCU_MAX78002 \ - -DBOARD_TUD_MAX_SPEED=OPT_MODE_HIGH_SPEED - -# mcu driver cause following warnings -CFLAGS += -Wno-error=redundant-decls \ - -Wno-error=strict-prototypes \ - -Wno-error=unused-parameter \ - -Wno-error=enum-conversion \ - -Wno-error=sign-compare \ - -Wno-error=cast-qual - -LDFLAGS_GCC += -nostartfiles --specs=nosys.specs --specs=nano.specs - -# For flash-jlink target -JLINK_DEVICE = max78000 - -# flash target using Jlink by default -flash: flash-jlink - -# Optional flash option when running within an installed MSDK to use OpenOCD -# Mainline OpenOCD does not yet have the MAX32's flash algorithm integrated. -# If the MSDK is installed, flash-msdk can be run to utilize the the modified -# openocd with the algorithms -MAXIM_PATH := $(subst \,/,$(MAXIM_PATH)) -flash-msdk: $(BUILD)/$(PROJECT).elf - $(MAXIM_PATH)/Tools/OpenOCD/openocd -s $(MAXIM_PATH)/Tools/OpenOCD/scripts \ - -f interface/cmsis-dap.cfg -f target/max78002.cfg \ - -c "program $(BUILD)/$(PROJECT).elf verify; init; reset; exit" - -# ----------------- -# Sources & Include -# ----------------- -PERIPH_SRC = $(TOP)/$(MAX32_PERIPH)/Source -SRC_C += \ - src/portable/mentor/musb/dcd_musb.c \ - $(MAX32_CMSIS)/Device/Maxim/MAX78002/Source/heap.c \ - $(MAX32_CMSIS)/Device/Maxim/MAX78002/Source/system_max78002.c \ - $(PERIPH_SRC)/SYS/mxc_assert.c \ - $(PERIPH_SRC)/SYS/mxc_delay.c \ - $(PERIPH_SRC)/SYS/mxc_lock.c \ - $(PERIPH_SRC)/SYS/nvic_table.c \ - $(PERIPH_SRC)/SYS/pins_ai87.c \ - $(PERIPH_SRC)/SYS/sys_ai87.c \ - $(PERIPH_SRC)/AES/aes_ai87.c \ - $(PERIPH_SRC)/AES/aes_revb.c \ - $(PERIPH_SRC)/FLC/flc_common.c \ - $(PERIPH_SRC)/FLC/flc_ai87.c \ - $(PERIPH_SRC)/FLC/flc_reva.c \ - $(PERIPH_SRC)/GPIO/gpio_common.c \ - $(PERIPH_SRC)/GPIO/gpio_ai87.c \ - $(PERIPH_SRC)/GPIO/gpio_reva.c \ - $(PERIPH_SRC)/ICC/icc_ai87.c \ - $(PERIPH_SRC)/ICC/icc_reva.c \ - $(PERIPH_SRC)/TRNG/trng_ai87.c \ - $(PERIPH_SRC)/TRNG/trng_revb.c \ - $(PERIPH_SRC)/UART/uart_common.c \ - $(PERIPH_SRC)/UART/uart_ai87.c \ - $(PERIPH_SRC)/UART/uart_revb.c \ - -INC += \ - $(TOP)/$(BOARD_PATH) \ - $(TOP)/$(MAX32_CMSIS)/Include \ - $(TOP)/$(MAX32_CMSIS)/Device/Maxim/MAX78002/Include \ - $(TOP)/$(MAX32_PERIPH)/Include/MAX78002 \ - $(PERIPH_SRC)/SYS \ - $(PERIPH_SRC)/GPIO \ - $(PERIPH_SRC)/AES \ - $(PERIPH_SRC)/ICC \ - $(PERIPH_SRC)/FLC \ - $(PERIPH_SRC)/TRNG \ - $(PERIPH_SRC)/UART diff --git a/hw/bsp/max78002/max78002.ld b/hw/bsp/max78002/max78002.ld deleted file mode 100644 index e5c4866ee..000000000 --- a/hw/bsp/max78002/max78002.ld +++ /dev/null @@ -1,182 +0,0 @@ -MEMORY { - ROM (rx) : ORIGIN = 0x00000000, LENGTH = 0x00010000 /* 64 kB ROM */ - FLASH (rx) : ORIGIN = 0x10000000, LENGTH = 0x00280000 /* 2.5 MB Flash */ - SRAM (rwx) : ORIGIN = 0x20000000, LENGTH = 0x00060000 /* 384 kB SRAM */ - /*CSI2 (rwx) : ORIGIN = 0x2001F000, LENGTH = 0x00001000 4096 B CSI2 Buffer */ -} - -SECTIONS { - .rom : - { - KEEP(*(.rom_vector)) - *(.rom_handlers*) - } > ROM - - .text : - { - _text = .; - KEEP(*(.isr_vector)) - EXCLUDE_FILE (*riscv.o) *(.text*) /* Program code (exclude RISCV code) */ - *(.rodata*) /* read-only data: "const" */ - - KEEP(*(.init)) - KEEP(*(.fini)) - - /* .ctors */ - *crtbegin.o(.ctors) - *crtbegin?.o(.ctors) - *(EXCLUDE_FILE(*crtend?.o *crtend.o) .ctors) - *(SORT(.ctors.*)) - *(.ctors) - - /* .dtors */ - *crtbegin.o(.dtors) - *crtbegin?.o(.dtors) - *(EXCLUDE_FILE(*crtend?.o *crtend.o) .dtors) - *(SORT(.dtors.*)) - *(.dtors) - - /* C++ Exception handling */ - KEEP(*(.eh_frame*)) - _etext = .; - } > FLASH - - .ARM.extab : - { - *(.ARM.extab* .gnu.linkonce.armextab.*) - } > FLASH - - /* Binary import */ - .bin_storage : - { - FILL(0xFF) - _bin_start_ = .; - KEEP(*(.bin_storage_img)) - _bin_end_ = .; - . = ALIGN(4); - } > FLASH - - .rom_code : - { - . = ALIGN(16); - _sran_code = .; - *(.rom_code_section) - _esran_code = .; - } > ROM - - .flash_code : - { - . = ALIGN(16); - _sran_code = .; - *(.flash_code_section) - _esran_code = .; - } > FLASH - - .sram_code : - { - . = ALIGN(16); - _sran_code = .; - *(.sram_code_section) - _esran_code = .; - } > SRAM - - /* it's used for C++ exception handling */ - /* we need to keep this to avoid overlapping */ - .ARM.exidx : - { - __exidx_start = .; - *(.ARM.exidx* .gnu.linkonce.armexidx.*) - __exidx_end = .; - } > FLASH - - .data : - { - _data = ALIGN(., 4); - _csi = . + 0x20000; - *(vtable) - *(.data*) /*read-write initialized data: initialized global variable*/ - - - /* These array sections are used by __libc_init_array to call static C++ constructors */ - . = ALIGN(4); - /* preinit data */ - PROVIDE_HIDDEN (__preinit_array_start = .); - KEEP(*(.preinit_array)) - PROVIDE_HIDDEN (__preinit_array_end = .); - - . = ALIGN(4); - /* init data */ - PROVIDE_HIDDEN (__init_array_start = .); - KEEP(*(SORT(.init_array.*))) - KEEP(*(.init_array)) - PROVIDE_HIDDEN (__init_array_end = .); - - . = ALIGN(4); - /* finit data */ - PROVIDE_HIDDEN (__fini_array_start = .); - KEEP(*(SORT(.fini_array.*))) - KEEP(*(.fini_array)) - PROVIDE_HIDDEN (__fini_array_end = .); - - _edata = ALIGN(., 4); - - } > SRAM AT>FLASH - __load_data = LOADADDR(.data); - - .bss : - { - . = ALIGN(4); - _bss = .; - *(.bss*) /*read-write zero initialized data: uninitialized global variable*/ - *(COMMON) - _ebss = ALIGN(., 4); - } > SRAM - - .shared : - { - . = ALIGN(4); - _shared = .; - *(.mailbox*) - . = ALIGN(4); - *(.shared*) /*read-write zero initialized data: uninitialized global variable*/ - _eshared = ALIGN(., 4); - } > SRAM - __shared_data = LOADADDR(.shared); - - /* Set stack top to end of RAM, and stack limit move down by - * size of stack_dummy section */ - __StackTop = ORIGIN(SRAM) + LENGTH(SRAM); - __StackLimit = __StackTop - SIZEOF(.stack_dummy); - - /* .stack_dummy section doesn't contains any symbols. It is only - * used for linker to calculate size of stack sections, and assign - * values to stack symbols later */ - .stack_dummy (COPY): - { - *(.stack*) - } > SRAM - - .heap (COPY): - { - . = ALIGN(4); - PROVIDE ( end = . ); - PROVIDE ( _end = . ); - *(.heap*) - __HeapLimit = ABSOLUTE(__StackLimit); - } > SRAM - - PROVIDE(__stack = __StackTop); - - /* Check if data + heap + stack exceeds RAM limit */ - ASSERT(__StackLimit >= _ebss, "region RAM overflowed with stack") - - /* Section used by RISCV loader projects. See RISCV_LOAD documentation in the build system. */ - .riscv_flash : - { - /* Align address to mod 256 with a small offset. This is required to match the flash page size.*/ - . = ALIGN(256); /* ALIGN operatator is used here. Note that (. & 0x1FFFFF00) was used in the past, but a strange bug was seen on Windows where the & did not behave as expected.*/ - . += 0x100; - _riscv_boot = .; - KEEP(*riscv.o (.text*)) - } > FLASH -} diff --git a/hw/bsp/maxim/FreeRTOSConfig/FreeRTOSConfig.h b/hw/bsp/maxim/FreeRTOSConfig/FreeRTOSConfig.h new file mode 100644 index 000000000..e5a76af85 --- /dev/null +++ b/hw/bsp/maxim/FreeRTOSConfig/FreeRTOSConfig.h @@ -0,0 +1,149 @@ +/* + * FreeRTOS Kernel V10.0.0 + * Copyright (C) 2017 Amazon.com, Inc. or its affiliates. All Rights Reserved. + * + * Permission is hereby granted, free of charge, to any person obtaining a copy of + * this software and associated documentation files (the "Software"), to deal in + * the Software without restriction, including without limitation the rights to + * use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of + * the Software, and to permit persons to whom the Software is furnished to do so, + * subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in all + * copies or substantial portions of the Software. If you wish to use our Amazon + * FreeRTOS name, please do so in a fair use way that does not cause confusion. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS + * FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR + * COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER + * IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN + * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. + * + * http://www.FreeRTOS.org + * http://aws.amazon.com/freertos + * + * 1 tab == 4 spaces! + */ + + +#ifndef FREERTOS_CONFIG_H +#define FREERTOS_CONFIG_H + +/*----------------------------------------------------------- + * Application specific definitions. + * + * These definitions should be adjusted for your particular hardware and + * application requirements. + * + * THESE PARAMETERS ARE DESCRIBED WITHIN THE 'CONFIGURATION' SECTION OF THE + * FreeRTOS API DOCUMENTATION AVAILABLE ON THE FreeRTOS.org WEB SITE. + * + * See http://www.freertos.org/a00110.html. + *----------------------------------------------------------*/ + +// skip if included from IAR assembler +#ifndef __IASMARM__ + #include "mxc_device.h" +#endif + +/* Cortex M23/M33 port configuration. */ +#define configENABLE_MPU 0 +#define configENABLE_FPU 1 +#define configENABLE_TRUSTZONE 0 +#define configMINIMAL_SECURE_STACK_SIZE (1024) + +#define configUSE_PREEMPTION 1 +#define configUSE_PORT_OPTIMISED_TASK_SELECTION 0 +#define configCPU_CLOCK_HZ SystemCoreClock +#define configTICK_RATE_HZ ( 1000 ) +#define configMAX_PRIORITIES ( 5 ) +#define configMINIMAL_STACK_SIZE ( 128 ) +#define configTOTAL_HEAP_SIZE ( configSUPPORT_DYNAMIC_ALLOCATION*4*1024 ) +#define configMAX_TASK_NAME_LEN 16 +#define configUSE_16_BIT_TICKS 0 +#define configIDLE_SHOULD_YIELD 1 +#define configUSE_MUTEXES 1 +#define configUSE_RECURSIVE_MUTEXES 1 +#define configUSE_COUNTING_SEMAPHORES 1 +#define configQUEUE_REGISTRY_SIZE 4 +#define configUSE_QUEUE_SETS 0 +#define configUSE_TIME_SLICING 0 +#define configUSE_NEWLIB_REENTRANT 0 +#define configENABLE_BACKWARD_COMPATIBILITY 1 +#define configSTACK_ALLOCATION_FROM_SEPARATE_HEAP 0 + +#define configSUPPORT_STATIC_ALLOCATION 1 +#define configSUPPORT_DYNAMIC_ALLOCATION 0 + +/* Hook function related definitions. */ +#define configUSE_IDLE_HOOK 0 +#define configUSE_TICK_HOOK 0 +#define configUSE_MALLOC_FAILED_HOOK 0 // cause nested extern warning +#define configCHECK_FOR_STACK_OVERFLOW 2 +#define configCHECK_HANDLER_INSTALLATION 0 + +/* Run time and task stats gathering related definitions. */ +#define configGENERATE_RUN_TIME_STATS 0 +#define configRECORD_STACK_HIGH_ADDRESS 1 +#define configUSE_TRACE_FACILITY 1 // legacy trace +#define configUSE_STATS_FORMATTING_FUNCTIONS 0 + +/* Co-routine definitions. */ +#define configUSE_CO_ROUTINES 0 +#define configMAX_CO_ROUTINE_PRIORITIES 2 + +/* Software timer related definitions. */ +#define configUSE_TIMERS 1 +#define configTIMER_TASK_PRIORITY (configMAX_PRIORITIES-2) +#define configTIMER_QUEUE_LENGTH 32 +#define configTIMER_TASK_STACK_DEPTH configMINIMAL_STACK_SIZE + +/* Optional functions - most linkers will remove unused functions anyway. */ +#define INCLUDE_vTaskPrioritySet 0 +#define INCLUDE_uxTaskPriorityGet 0 +#define INCLUDE_vTaskDelete 0 +#define INCLUDE_vTaskSuspend 1 // required for queue, semaphore, mutex to be blocked indefinitely with portMAX_DELAY +#define INCLUDE_xResumeFromISR 0 +#define INCLUDE_vTaskDelayUntil 1 +#define INCLUDE_vTaskDelay 1 +#define INCLUDE_xTaskGetSchedulerState 0 +#define INCLUDE_xTaskGetCurrentTaskHandle 1 +#define INCLUDE_uxTaskGetStackHighWaterMark 0 +#define INCLUDE_xTaskGetIdleTaskHandle 0 +#define INCLUDE_xTimerGetTimerDaemonTaskHandle 0 +#define INCLUDE_pcTaskGetTaskName 0 +#define INCLUDE_eTaskGetState 0 +#define INCLUDE_xEventGroupSetBitFromISR 0 +#define INCLUDE_xTimerPendFunctionCall 0 + +/* FreeRTOS hooks to NVIC vectors */ +#define xPortPendSVHandler PendSV_Handler +#define xPortSysTickHandler SysTick_Handler +#define vPortSVCHandler SVC_Handler + +//--------------------------------------------------------------------+ +// Interrupt nesting behavior configuration. +//--------------------------------------------------------------------+ + +// For Cortex-M specific: __NVIC_PRIO_BITS is defined in mcu header +#define configPRIO_BITS __NVIC_PRIO_BITS + +/* The lowest interrupt priority that can be used in a call to a "set priority" function. */ +#define configLIBRARY_LOWEST_INTERRUPT_PRIORITY ((1<-jlink` target for CMake. + +Most the Evaluation Kit and boards are shipped with a CMSIS-DAP +compatible debug probe. However, at the time of writing, the necessary flashing +algorithms for OpenOCD have not yet been incorporated into the OpenOCD master +branch. To utilize the provided debug probes, please install the bundled MSDK +package which includes the appropriate OpenOCD modifications. To leverage this +OpenOCD instance, run the `-openocd` CMake +target. diff --git a/hw/bsp/maxim/boards/apard32690/board.cmake b/hw/bsp/maxim/boards/apard32690/board.cmake new file mode 100644 index 000000000..a03d05f8d --- /dev/null +++ b/hw/bsp/maxim/boards/apard32690/board.cmake @@ -0,0 +1,4 @@ +set(MAX_DEVICE max32690) + +function(update_board TARGET) +endfunction() diff --git a/hw/bsp/maxim/boards/apard32690/board.h b/hw/bsp/maxim/boards/apard32690/board.h new file mode 100644 index 000000000..87b9c4e88 --- /dev/null +++ b/hw/bsp/maxim/boards/apard32690/board.h @@ -0,0 +1,61 @@ +/* + * The MIT License (MIT) + * + * Copyright (c) 2024, Brent Kowal (Analog Devices, Inc) + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + * This file is part of the TinyUSB stack. + */ + +/* metadata: + name: APARD32690-SL + url: https://www.analog.com/en/resources/evaluation-hardware-and-software/evaluation-boards-kits/ad-apard32690-sl.html +*/ + +#ifndef BOARD_H_ +#define BOARD_H_ + +#include "gpio.h" +#include "mxc_sys.h" + +#ifdef __cplusplus +extern "C" { +#endif + +// LED +#define LED_PORT MXC_GPIO2 +#define LED_PIN MXC_GPIO_PIN_1 +#define LED_VDDIO MXC_GPIO_VSSEL_VDDIOH +#define LED_STATE_ON 1 + +// Button +#define BUTTON_PORT MXC_GPIO1 +#define BUTTON_PIN MXC_GPIO_PIN_27 +#define BUTTON_PULL MXC_GPIO_PAD_NONE +#define BUTTON_STATE_ACTIVE 1 + +// UART Enable for UART on ARM SWD Connector +#define UART_NUM 0 + +#ifdef __cplusplus +} +#endif + +#endif /* BOARD_H_ */ diff --git a/hw/bsp/maxim/boards/max32650evkit/board.cmake b/hw/bsp/maxim/boards/max32650evkit/board.cmake new file mode 100644 index 000000000..59721e756 --- /dev/null +++ b/hw/bsp/maxim/boards/max32650evkit/board.cmake @@ -0,0 +1,8 @@ +set(MAX_DEVICE max32650) + +function(update_board TARGET) +endfunction() + +function(prepare_image TARGET_IN) + #No signing required +endfunction() diff --git a/hw/bsp/maxim/boards/max32650evkit/board.h b/hw/bsp/maxim/boards/max32650evkit/board.h new file mode 100644 index 000000000..65ed2659e --- /dev/null +++ b/hw/bsp/maxim/boards/max32650evkit/board.h @@ -0,0 +1,61 @@ +/* + * The MIT License (MIT) + * + * Copyright (c) 2024, Brent Kowal (Analog Devices, Inc) + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + * This file is part of the TinyUSB stack. + */ + +/* metadata: + name: MAX32650 EVKIT + url: https://www.analog.com/en/resources/evaluation-hardware-and-software/evaluation-boards-kits/max32650-evkit.html#eb-overview +*/ + +#ifndef BOARD_H_ +#define BOARD_H_ + +#include "gpio.h" +#include "mxc_sys.h" + +#ifdef __cplusplus +extern "C" { +#endif + +// LED +#define LED_PORT MXC_GPIO2 +#define LED_PIN MXC_GPIO_PIN_25 +#define LED_VDDIO MXC_GPIO_VSSEL_VDDIOH +#define LED_STATE_ON 0 + +// Button +#define BUTTON_PORT MXC_GPIO2 +#define BUTTON_PIN MXC_GPIO_PIN_28 +#define BUTTON_PULL MXC_GPIO_PAD_WEAK_PULL_UP +#define BUTTON_STATE_ACTIVE 0 + +// UART Enable for EvKit's Integrated FTDI Adapter. Pin Mux handled by the HAL +#define UART_NUM 0 + +#ifdef __cplusplus +} +#endif + +#endif /* BOARD_H_ */ diff --git a/hw/bsp/maxim/boards/max32650fthr/board.cmake b/hw/bsp/maxim/boards/max32650fthr/board.cmake new file mode 100644 index 000000000..59721e756 --- /dev/null +++ b/hw/bsp/maxim/boards/max32650fthr/board.cmake @@ -0,0 +1,8 @@ +set(MAX_DEVICE max32650) + +function(update_board TARGET) +endfunction() + +function(prepare_image TARGET_IN) + #No signing required +endfunction() diff --git a/hw/bsp/maxim/boards/max32650fthr/board.h b/hw/bsp/maxim/boards/max32650fthr/board.h new file mode 100644 index 000000000..755fa15b5 --- /dev/null +++ b/hw/bsp/maxim/boards/max32650fthr/board.h @@ -0,0 +1,62 @@ +/* + * The MIT License (MIT) + * + * Copyright (c) 2024, Brent Kowal (Analog Devices, Inc) + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + * This file is part of the TinyUSB stack. + */ + +/* metadata: + name: MAX32650 Feather + url: https://www.analog.com/en/resources/evaluation-hardware-and-software/evaluation-boards-kits/max32650fthr.html +*/ + +#ifndef BOARD_H_ +#define BOARD_H_ + +#include "gpio.h" +#include "mxc_sys.h" + +#ifdef __cplusplus +extern "C" { +#endif + +// LED +#define LED_PORT MXC_GPIO1 +#define LED_PIN MXC_GPIO_PIN_14 +#define LED_VDDIO MXC_GPIO_VSSEL_VDDIO +#define LED_STATE_ON 0 + +// Button +#define BUTTON_PORT MXC_GPIO1 +#define BUTTON_PIN MXC_GPIO_PIN_19 +#define BUTTON_PULL MXC_GPIO_PAD_WEAK_PULL_UP +#define BUTTON_STATE_ACTIVE 0 + +// UART Enable for SWD UART Pins. Pin Mux handled by the HAL +#define UART_NUM 0 + + +#ifdef __cplusplus +} +#endif + +#endif /* BOARD_H_ */ diff --git a/hw/bsp/maxim/boards/max32651evkit/board.cmake b/hw/bsp/maxim/boards/max32651evkit/board.cmake new file mode 100644 index 000000000..773989126 --- /dev/null +++ b/hw/bsp/maxim/boards/max32651evkit/board.cmake @@ -0,0 +1,31 @@ +set(MAX_DEVICE max32650) + +# Use the secure linker file +set(LD_FILE_GNU ${CMAKE_CURRENT_LIST_DIR}/../../linker/max32651.ld) + +function(update_board TARGET) + # for the signed target, need to add the __SLA_FWK__ define + target_compile_definitions(${TARGET} PUBLIC + __SLA_FWK__ + ) +endfunction() + +function(sign_image TARGET_IN) + #For the signed target, set up a POST_BUILD command to sign the elf file once created + if((WIN32) OR (MINGW) OR (MSYS)) + set(SIGN_EXE "sign_app.exe") + else() + set(SIGN_EXE "sign_app") + endif() + set(MCU_PATH "${TOP}/hw/mcu/analog/msdk/") + + # Custom POST_BUILD command + add_custom_command( + TARGET ${TARGET_IN} POST_BUILD + COMMAND ${CMAKE_OBJCOPY} $ -R .sig -O binary $/${TARGET_IN}.bin + COMMAND ${MCU_PATH}/Tools/SBT/bin/${SIGN_EXE} -c MAX32651 key_file=${MCU_PATH}/Tools/SBT/devices/MAX32651/keys/maximtestcrk.key + ca=$/${TARGET_IN}.bin sca=$/${TARGET_IN}.sbin + COMMAND ${CMAKE_OBJCOPY} $ --update-section .sig=$/${TARGET_IN}.sig + VERBATIM + ) +endfunction() diff --git a/hw/bsp/maxim/boards/max32651evkit/board.h b/hw/bsp/maxim/boards/max32651evkit/board.h new file mode 100644 index 000000000..0b49ff309 --- /dev/null +++ b/hw/bsp/maxim/boards/max32651evkit/board.h @@ -0,0 +1,61 @@ +/* + * The MIT License (MIT) + * + * Copyright (c) 2024, Brent Kowal (Analog Devices, Inc) + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + * This file is part of the TinyUSB stack. + */ + +/* metadata: + name: MAX32651 EVKIT + url: https://www.analog.com/en/resources/evaluation-hardware-and-software/evaluation-boards-kits/max32651-evkit.html +*/ + +#ifndef BOARD_H_ +#define BOARD_H_ + +#include "gpio.h" +#include "mxc_sys.h" + +#ifdef __cplusplus +extern "C" { +#endif + +// LED +#define LED_PORT MXC_GPIO2 +#define LED_PIN MXC_GPIO_PIN_25 +#define LED_VDDIO MXC_GPIO_VSSEL_VDDIOH +#define LED_STATE_ON 0 + +// Button +#define BUTTON_PORT MXC_GPIO2 +#define BUTTON_PIN MXC_GPIO_PIN_28 +#define BUTTON_PULL MXC_GPIO_PAD_WEAK_PULL_UP +#define BUTTON_STATE_ACTIVE 0 + +// UART Enable for EvKit's Integrated FTDI Adapter. Pin Mux handled by the HAL +#define UART_NUM 0 + +#ifdef __cplusplus +} +#endif + +#endif /* BOARD_H_ */ diff --git a/hw/bsp/maxim/boards/max32666evkit/board.cmake b/hw/bsp/maxim/boards/max32666evkit/board.cmake new file mode 100644 index 000000000..e7116b603 --- /dev/null +++ b/hw/bsp/maxim/boards/max32666evkit/board.cmake @@ -0,0 +1,4 @@ +set(MAX_DEVICE max32665) + +function(update_board TARGET) +endfunction() diff --git a/hw/bsp/maxim/boards/max32666evkit/board.h b/hw/bsp/maxim/boards/max32666evkit/board.h new file mode 100644 index 000000000..54589444d --- /dev/null +++ b/hw/bsp/maxim/boards/max32666evkit/board.h @@ -0,0 +1,62 @@ +/* + * The MIT License (MIT) + * + * Copyright (c) 2024, Brent Kowal (Analog Devices, Inc) + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + * This file is part of the TinyUSB stack. + */ + +/* metadata: + name: MAX32666 EVKIT + url: https://www.analog.com/en/resources/evaluation-hardware-and-software/evaluation-boards-kits/max32666evkit.html +*/ + +#ifndef BOARD_H_ +#define BOARD_H_ + +#include "gpio.h" +#include "mxc_sys.h" + +#ifdef __cplusplus +extern "C" { +#endif + +// LED +#define LED_PORT MXC_GPIO1 +#define LED_PIN MXC_GPIO_PIN_14 +#define LED_VDDIO MXC_GPIO_VSSEL_VDDIOH +#define LED_STATE_ON 0 + +// Button +#define BUTTON_PORT MXC_GPIO1 +#define BUTTON_PIN MXC_GPIO_PIN_6 +#define BUTTON_PULL MXC_GPIO_PAD_PULL_UP +#define BUTTON_STATE_ACTIVE 0 + +// UART Enable for EvKit's Integrated FTDI Adapter. Pin Mux handled by the HAL +#define UART_NUM 1 +#define UART_MAP MAP_A + +#ifdef __cplusplus +} +#endif + +#endif /* BOARD_H_ */ diff --git a/hw/bsp/maxim/boards/max32666fthr/board.cmake b/hw/bsp/maxim/boards/max32666fthr/board.cmake new file mode 100644 index 000000000..e7116b603 --- /dev/null +++ b/hw/bsp/maxim/boards/max32666fthr/board.cmake @@ -0,0 +1,4 @@ +set(MAX_DEVICE max32665) + +function(update_board TARGET) +endfunction() diff --git a/hw/bsp/maxim/boards/max32666fthr/board.h b/hw/bsp/maxim/boards/max32666fthr/board.h new file mode 100644 index 000000000..0caea5934 --- /dev/null +++ b/hw/bsp/maxim/boards/max32666fthr/board.h @@ -0,0 +1,62 @@ +/* + * The MIT License (MIT) + * + * Copyright (c) 2024, Brent Kowal (Analog Devices, Inc) + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + * This file is part of the TinyUSB stack. + */ + +/* metadata: + name: MAX32666 Feather + url: https://www.analog.com/en/resources/evaluation-hardware-and-software/evaluation-boards-kits/max32666fthr.html +*/ + +#ifndef BOARD_H_ +#define BOARD_H_ + +#include "gpio.h" +#include "mxc_sys.h" + +#ifdef __cplusplus +extern "C" { +#endif + +// LED +#define LED_PORT MXC_GPIO0 +#define LED_PIN MXC_GPIO_PIN_29 +#define LED_VDDIO MXC_GPIO_VSSEL_VDDIOH +#define LED_STATE_ON 0 + +// Button +#define BUTTON_PORT MXC_GPIO1 +#define BUTTON_PIN MXC_GPIO_PIN_10 +#define BUTTON_PULL MXC_GPIO_PAD_PULL_UP +#define BUTTON_STATE_ACTIVE 0 + +// UART Enable for UART on SWD. Pin Mux handled by the HAL +#define UART_NUM 1 +#define UART_MAP MAP_B + +#ifdef __cplusplus +} +#endif + +#endif /* BOARD_H_ */ diff --git a/hw/bsp/maxim/boards/max32690evkit/board.cmake b/hw/bsp/maxim/boards/max32690evkit/board.cmake new file mode 100644 index 000000000..a03d05f8d --- /dev/null +++ b/hw/bsp/maxim/boards/max32690evkit/board.cmake @@ -0,0 +1,4 @@ +set(MAX_DEVICE max32690) + +function(update_board TARGET) +endfunction() diff --git a/hw/bsp/maxim/boards/max32690evkit/board.h b/hw/bsp/maxim/boards/max32690evkit/board.h new file mode 100644 index 000000000..aa8dbb1de --- /dev/null +++ b/hw/bsp/maxim/boards/max32690evkit/board.h @@ -0,0 +1,61 @@ +/* + * The MIT License (MIT) + * + * Copyright (c) 2024, Brent Kowal (Analog Devices, Inc) + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + * This file is part of the TinyUSB stack. + */ + +/* metadata: + name: MAX32690 EVKIT + url: https://www.analog.com/en/resources/evaluation-hardware-and-software/evaluation-boards-kits/max32690evkit.html +*/ + +#ifndef BOARD_H_ +#define BOARD_H_ + +#include "gpio.h" +#include "mxc_sys.h" + +#ifdef __cplusplus +extern "C" { +#endif + +// LED +#define LED_PORT MXC_GPIO0 +#define LED_PIN MXC_GPIO_PIN_14 +#define LED_VDDIO MXC_GPIO_VSSEL_VDDIOH +#define LED_STATE_ON 0 + +// Button +#define BUTTON_PORT MXC_GPIO4 +#define BUTTON_PIN MXC_GPIO_PIN_0 +#define BUTTON_PULL MXC_GPIO_PAD_PULL_UP +#define BUTTON_STATE_ACTIVE 0 + +// UART Enable for EvKit's Integrated FTDI Adapter. Pin Mux handled by the HAL +#define UART_NUM 2 + +#ifdef __cplusplus +} +#endif + +#endif /* BOARD_H_ */ diff --git a/hw/bsp/maxim/boards/max78002evkit/board.cmake b/hw/bsp/maxim/boards/max78002evkit/board.cmake new file mode 100644 index 000000000..dd4c3c215 --- /dev/null +++ b/hw/bsp/maxim/boards/max78002evkit/board.cmake @@ -0,0 +1,4 @@ +set(MAX_DEVICE max78002) + +function(update_board TARGET) +endfunction() diff --git a/hw/bsp/maxim/boards/max78002evkit/board.h b/hw/bsp/maxim/boards/max78002evkit/board.h new file mode 100644 index 000000000..85d55d7de --- /dev/null +++ b/hw/bsp/maxim/boards/max78002evkit/board.h @@ -0,0 +1,63 @@ +/* + * The MIT License (MIT) + * + * Copyright (c) 2024, Brent Kowal (Analog Devices, Inc) + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + * This file is part of the TinyUSB stack. + */ + +/* metadata: + name: MAX78002 EVKIT + url: https://www.analog.com/en/resources/evaluation-hardware-and-software/evaluation-boards-kits/max78002evkit.html +*/ + +#ifndef BOARD_H_ +#define BOARD_H_ + +#include "gpio.h" +#include "mxc_sys.h" + +#ifdef __cplusplus +extern "C" { +#endif + +// LED +#define LED_PORT MXC_GPIO2 +#define LED_PIN MXC_GPIO_PIN_4 +#define LED_VDDIO MXC_GPIO_VSSEL_VDDIOH +#define LED_STATE_ON 1 + +// Button +#define BUTTON_PORT MXC_GPIO2 +#define BUTTON_PIN MXC_GPIO_PIN_6 +#define BUTTON_PULL MXC_GPIO_PAD_PULL_UP +#define BUTTON_STATE_ACTIVE 0 + +// UART Enable for EvKit's Integrated FTDI Adapter. Pin Mux handled by the HAL +#define UART_NUM 0 +#define UART_PORT MXC_GPIO0 +#define UART_VDDIO_BITS 0xF + +#ifdef __cplusplus +} +#endif + +#endif /* BOARD_H_ */ diff --git a/hw/bsp/maxim/family.c b/hw/bsp/maxim/family.c new file mode 100644 index 000000000..0ef6b8c4d --- /dev/null +++ b/hw/bsp/maxim/family.c @@ -0,0 +1,213 @@ +/* + * The MIT License (MIT) + * + * Copyright (c) 2024 Brent Kowal (Analog Devices, Inc) + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + * This file is part of the TinyUSB stack. + */ + +/* metadata: + manufacturer: Analog Devices +*/ + +#ifdef __GNUC__ +#pragma GCC diagnostic push +#pragma GCC diagnostic ignored "-Wstrict-prototypes" // _mxc_crit_get_state() +#endif + +#include "gpio.h" +#include "mxc_sys.h" +#if __has_include("mcr_regs.h") +#include "mcr_regs.h" +#endif +#include "mxc_device.h" +#include "uart.h" + +#ifdef __GNUC__ +#pragma GCC diagnostic pop +#endif + +#include "board.h" +#include "bsp/board_api.h" + +//--------------------------------------------------------------------+ +// Forward USB interrupt events to TinyUSB IRQ Handler +//--------------------------------------------------------------------+ +void USB_IRQHandler(void) { + tud_int_handler(0); +} + +//--------------------------------------------------------------------+ +// MACRO TYPEDEF CONSTANT ENUM +//--------------------------------------------------------------------+ +mxc_uart_regs_t *ConsoleUart = MXC_UART_GET_UART(UART_NUM); + +void board_init(void) { +#if CFG_TUSB_OS == OPT_OS_NONE + // 1ms tick timer + SysTick_Config(SystemCoreClock / 1000); +#elif CFG_TUSB_OS == OPT_OS_FREERTOS + // If freeRTOS is used, IRQ priority is limit by max syscall ( smaller is higher ) + NVIC_SetPriority(USB_IRQn, configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY); +#endif + mxc_gpio_cfg_t gpioConfig; + + // LED + gpioConfig.drvstr = MXC_GPIO_DRVSTR_0; + gpioConfig.func = MXC_GPIO_FUNC_OUT; + gpioConfig.mask = LED_PIN; + gpioConfig.pad = MXC_GPIO_PAD_NONE; + gpioConfig.port = LED_PORT; + gpioConfig.vssel = LED_VDDIO; + MXC_GPIO_Config(&gpioConfig); + board_led_write(false); + + // Button + gpioConfig.drvstr = MXC_GPIO_DRVSTR_0; + gpioConfig.func = MXC_GPIO_FUNC_IN; + gpioConfig.mask = BUTTON_PIN; + gpioConfig.pad = BUTTON_PULL; + gpioConfig.port = BUTTON_PORT; + gpioConfig.vssel = MXC_GPIO_VSSEL_VDDIO; + MXC_GPIO_Config(&gpioConfig); + + // UART +#if MAX_PERIPH_ID == 14 + MXC_UART_Init(ConsoleUart, CFG_BOARD_UART_BAUDRATE, UART_MAP); +#elif MAX_PERIPH_ID == 18 || MAX_PERIPH_ID == 87 + MXC_UART_Init(ConsoleUart, CFG_BOARD_UART_BAUDRATE, MXC_UART_IBRO_CLK); + #if MAX_PERIPH_ID == 87 + UART_PORT->vssel |= UART_VDDIO_BITS; // Set necessary bits to 3.3V + #endif +#endif + + //USB +#if defined(MAX32650) + // Startup the HIRC96M clock if it's not on already + if (!(MXC_GCR->clk_ctrl & MXC_F_GCR_CLK_CTRL_HIRC96_EN)) { + MXC_GCR->clk_ctrl |= MXC_F_GCR_CLK_CTRL_HIRC96_EN; + MXC_SYS_Clock_Timeout(MXC_F_GCR_CLK_CTRL_HIRC96_RDY); + } + MXC_SYS_ClockEnable(MXC_SYS_PERIPH_CLOCK_USB); + MXC_SYS_Reset_Periph(MXC_SYS_RESET_USB); + +#elif defined(MAX32665) || defined(MAX32666) + // Startup the HIRC96M clock if it's not on already + if (!(MXC_GCR->clkcn & MXC_F_GCR_CLKCN_HIRC96M_EN)) { + MXC_GCR->clkcn |= MXC_F_GCR_CLKCN_HIRC96M_EN; + } + MXC_SYS_ClockEnable(MXC_SYS_PERIPH_CLOCK_USB); + MXC_SYS_Reset_Periph(MXC_SYS_RESET_USB); + +#elif defined(MAX32690) + MXC_SYS_ClockSourceEnable(MXC_SYS_CLOCK_IPO); + MXC_MCR->ldoctrl |= MXC_F_MCR_LDOCTRL_0P9EN; + MXC_SYS_ClockEnable(MXC_SYS_PERIPH_CLOCK_USB); + MXC_SYS_Reset_Periph(MXC_SYS_RESET0_USB); + +# elif defined(MAX78002) + MXC_MCR->ldoctrl |= MXC_F_MCR_LDOCTRL_0P9EN; + MXC_SYS_ClockEnable(MXC_SYS_PERIPH_CLOCK_USB); +#else + #error "Unsupported MAXIM MCU for board_dfu_init" +#endif +} + +//--------------------------------------------------------------------+ +// Board porting API +//--------------------------------------------------------------------+ + +void board_led_write(bool state) { +#if LED_STATE_ON + state = !state; +#endif + if (state) { + MXC_GPIO_OutClr(LED_PORT, LED_PIN); + } else { + MXC_GPIO_OutSet(LED_PORT, LED_PIN); + } +} + +uint32_t board_button_read(void) { + uint32_t state = MXC_GPIO_InGet(BUTTON_PORT, BUTTON_PIN) ? 1 : 0; + return BUTTON_STATE_ACTIVE == state; +} + +size_t board_get_unique_id(uint8_t id[], size_t max_len) { +#if defined(MAX32650) + // USN is 13 bytes on this device + MXC_SYS_GetUSN(id, 13); + return 13; +#else + uint8_t hw_id[MXC_SYS_USN_CHECKSUM_LEN]; //USN Buffer + MXC_SYS_GetUSN(hw_id, NULL); // 2nd parameter is optional checksum buffer + + size_t act_len = TU_MIN(max_len, MXC_SYS_USN_LEN); + memcpy(id, hw_id, act_len); + return act_len; +#endif +} + +int board_uart_read(uint8_t *buf, int len) { + int uart_val; + int act_len = 0; + + while (act_len < len) { + if ((uart_val = MXC_UART_ReadCharacterRaw(ConsoleUart)) == E_UNDERFLOW) { + break; + } else { + *buf++ = (uint8_t) uart_val; + act_len++; + } + } + return act_len; +} + +int board_uart_write(void const *buf, int len) { + int act_len = 0; + const uint8_t *ch_ptr = (const uint8_t *) buf; + while (act_len < len) { + MXC_UART_WriteCharacter(ConsoleUart, *ch_ptr++); + act_len++; + } + return len; +} + +#if CFG_TUSB_OS == OPT_OS_NONE +volatile uint32_t system_ticks = 0; + +void SysTick_Handler(void) { + system_ticks++; +} + +uint32_t board_millis(void) { + return system_ticks; +} +#endif + +void HardFault_Handler(void) { + __asm("BKPT #0\n"); +} + +// Required by __libc_init_array in startup code if we are compiling using +// -nostdlib/-nostartfiles. +void _init(void) { +} diff --git a/hw/bsp/maxim/family.cmake b/hw/bsp/maxim/family.cmake new file mode 100644 index 000000000..1fd5215ba --- /dev/null +++ b/hw/bsp/maxim/family.cmake @@ -0,0 +1,205 @@ +include_guard() + +# stub: overridden by board.cmake if needed +function(sign_image TARGET_IN) +endfunction() + +set(MSDK_LIB ${TOP}/hw/mcu/analog/msdk/Libraries) + +# include board specific +include(${CMAKE_CURRENT_LIST_DIR}/boards/${BOARD}/board.cmake) + +# toolchain set up +set(CMAKE_SYSTEM_CPU cortex-m4 CACHE INTERNAL "System Processor") +set(CMAKE_TOOLCHAIN_FILE ${TOP}/examples/build_system/cmake/toolchain/arm_${TOOLCHAIN}.cmake) + +cmake_print_variables(MAX_DEVICE) +string(TOUPPER ${MAX_DEVICE} MAX_DEVICE_UPPER) + +set(JLINK_DEVICE ${MAX_DEVICE}) +set(OPENOCD_OPTION "-f interface/cmsis-dap.cfg -f target/${MAX_DEVICE}.cfg") + +set(FAMILY_MCUS ${MAX_DEVICE_UPPER} CACHE INTERNAL "") + +if (${MAX_DEVICE} STREQUAL "max32650") + set(PERIPH_ID 10) + set(PERIPH_SUFFIX "me") +elseif (${MAX_DEVICE} STREQUAL "max32665" OR ${MAX_DEVICE} STREQUAL "max32666") + set(PERIPH_ID 14) + set(PERIPH_SUFFIX "me") +elseif (${MAX_DEVICE} STREQUAL "max32690") + set(PERIPH_ID 18) + set(PERIPH_SUFFIX "me") +elseif (${MAX_DEVICE} STREQUAL "max78002") + set(PERIPH_ID 87) + set(PERIPH_SUFFIX "ai") +else() + message(FATAL_ERROR "Unsupported MAX device: ${MAX_DEVICE}") +endif() + +#------------------------------------ +# BOARD_TARGET +#------------------------------------ +# only need to be built ONCE for all examples +function(add_board_target BOARD_TARGET) + if (TARGET ${BOARD_TARGET}) + return() + endif () + + # Startup & Linker script + set(STARTUP_FILE_GNU ${MSDK_LIB}/CMSIS/Device/Maxim/${MAX_DEVICE_UPPER}/Source/GCC/startup_${MAX_DEVICE}.S) + set(STARTUP_FILE_Clang ${STARTUP_FILE_GNU}) + + if (NOT DEFINED LD_FILE_GNU) + set(LD_FILE_GNU ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/linker/${MAX_DEVICE}.ld) + endif () + set(LD_FILE_Clang ${LD_FILE_GNU}) + + # Common + add_library(${BOARD_TARGET} STATIC + ${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} + ${MSDK_LIB}/CMSIS/Device/Maxim/${MAX_DEVICE_UPPER}/Source/heap.c + ${MSDK_LIB}/CMSIS/Device/Maxim/${MAX_DEVICE_UPPER}/Source/system_${MAX_DEVICE}.c + ${MSDK_LIB}/PeriphDrivers/Source/SYS/mxc_assert.c + ${MSDK_LIB}/PeriphDrivers/Source/SYS/mxc_delay.c + ${MSDK_LIB}/PeriphDrivers/Source/SYS/mxc_lock.c + ${MSDK_LIB}/PeriphDrivers/Source/SYS/nvic_table.c + ${MSDK_LIB}/PeriphDrivers/Source/SYS/pins_${PERIPH_SUFFIX}${PERIPH_ID}.c + ${MSDK_LIB}/PeriphDrivers/Source/SYS/sys_${PERIPH_SUFFIX}${PERIPH_ID}.c + ${MSDK_LIB}/PeriphDrivers/Source/FLC/flc_common.c + ${MSDK_LIB}/PeriphDrivers/Source/FLC/flc_${PERIPH_SUFFIX}${PERIPH_ID}.c + ${MSDK_LIB}/PeriphDrivers/Source/FLC/flc_reva.c + ${MSDK_LIB}/PeriphDrivers/Source/GPIO/gpio_common.c + ${MSDK_LIB}/PeriphDrivers/Source/GPIO/gpio_${PERIPH_SUFFIX}${PERIPH_ID}.c + ${MSDK_LIB}/PeriphDrivers/Source/GPIO/gpio_reva.c + ${MSDK_LIB}/PeriphDrivers/Source/ICC/icc_${PERIPH_SUFFIX}${PERIPH_ID}.c + ${MSDK_LIB}/PeriphDrivers/Source/ICC/icc_reva.c + ${MSDK_LIB}/PeriphDrivers/Source/UART/uart_common.c + ${MSDK_LIB}/PeriphDrivers/Source/UART/uart_${PERIPH_SUFFIX}${PERIPH_ID}.c + ) + target_include_directories(${BOARD_TARGET} PUBLIC + ${MSDK_LIB}/CMSIS/5.9.0/Core/Include + ${MSDK_LIB}/CMSIS/Device/Maxim/${MAX_DEVICE_UPPER}/Include + ${MSDK_LIB}/PeriphDrivers/Include/${MAX_DEVICE_UPPER} + ${MSDK_LIB}/PeriphDrivers/Source/SYS + ${MSDK_LIB}/PeriphDrivers/Source/GPIO + ${MSDK_LIB}/PeriphDrivers/Source/ICC + ${MSDK_LIB}/PeriphDrivers/Source/FLC + ${MSDK_LIB}/PeriphDrivers/Source/UART + ) + + # device specific + if (${MAX_DEVICE} STREQUAL "max32650" OR + ${MAX_DEVICE} STREQUAL "max32665" OR ${MAX_DEVICE} STREQUAL "max32666") + target_sources(${BOARD_TARGET} PRIVATE + ${MSDK_LIB}/PeriphDrivers/Source/ICC/icc_common.c + ${MSDK_LIB}/PeriphDrivers/Source/TPU/tpu_${PERIPH_SUFFIX}${PERIPH_ID}.c + ${MSDK_LIB}/PeriphDrivers/Source/TPU/tpu_reva.c + ${MSDK_LIB}/PeriphDrivers/Source/UART/uart_reva.c + ) + target_include_directories(${BOARD_TARGET} PUBLIC + ${MSDK_LIB}/PeriphDrivers/Source/TPU + ) + elseif (${MAX_DEVICE} STREQUAL "max32690") + target_sources(${BOARD_TARGET} PRIVATE + ${MSDK_LIB}/PeriphDrivers/Source/CTB/ctb_${PERIPH_SUFFIX}${PERIPH_ID}.c + ${MSDK_LIB}/PeriphDrivers/Source/CTB/ctb_reva.c + ${MSDK_LIB}/PeriphDrivers/Source/CTB/ctb_common.c + ${MSDK_LIB}/PeriphDrivers/Source/UART/uart_revb.c + ) + target_include_directories(${BOARD_TARGET} PUBLIC + ${MSDK_LIB}/PeriphDrivers/Source/CTB + ) + elseif (${MAX_DEVICE} STREQUAL "max78002") + target_sources(${BOARD_TARGET} PRIVATE + ${MSDK_LIB}/PeriphDrivers/Source/AES/aes_${PERIPH_SUFFIX}${PERIPH_ID}.c + ${MSDK_LIB}/PeriphDrivers/Source/AES/aes_revb.c + ${MSDK_LIB}/PeriphDrivers/Source/TRNG/trng_${PERIPH_SUFFIX}${PERIPH_ID}.c + ${MSDK_LIB}/PeriphDrivers/Source/TRNG/trng_revb.c + ${MSDK_LIB}/PeriphDrivers/Source/UART/uart_revb.c + ) + target_include_directories(${BOARD_TARGET} PUBLIC + ${MSDK_LIB}/PeriphDrivers/Source/AES + ${MSDK_LIB}/PeriphDrivers/Source/TRNG + ) + else() + message(FATAL_ERROR "Unsupported MAX device: ${MAX_DEVICE}") + endif() + + target_compile_definitions(${BOARD_TARGET} PUBLIC + TARGET=${MAX_DEVICE_UPPER} + TARGET_REV=0x4131 + MXC_ASSERT_ENABLE + ${MAX_DEVICE_UPPER} + IAR_PRAGMAS=0 + FLASH_BOOT_SIZE=${FLASH_BOOT_SIZE} + MAX_PERIPH_ID=${PERIPH_ID} + ) + + target_compile_definitions(${TARGET} PUBLIC + TARGET=MAX32690 + TARGET_REV=0x4131 + MXC_ASSERT_ENABLE + MAX32690 + BOARD_TUD_MAX_SPEED=OPT_MODE_HIGH_SPEED + ) + + target_compile_options(${BOARD_TARGET} PRIVATE + -Wno-error=strict-prototypes + ) + update_board(${BOARD_TARGET}) + + if (CMAKE_C_COMPILER_ID STREQUAL "GNU") + target_link_options(${BOARD_TARGET} PUBLIC + "LINKER:--script=${LD_FILE_GNU}" + -nostartfiles + --specs=nosys.specs --specs=nano.specs + ) + elseif (CMAKE_C_COMPILER_ID STREQUAL "Clang") + target_link_options(${BOARD_TARGET} PUBLIC + "LINKER:--script=${LD_FILE_Clang}" + ) + endif () +endfunction() + + +#------------------------------------ +# Functions +#------------------------------------ +function(family_configure_example TARGET RTOS) + family_configure_common(${TARGET} ${RTOS}) + + # Board target + add_board_target(board_${BOARD}) + + #---------- Port Specific ---------- + # These files are built for each example since it depends on example's tusb_config.h + target_sources(${TARGET} PUBLIC + # BSP + ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/family.c + ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/../board.c + ) + target_include_directories(${TARGET} PUBLIC + # family, hw, board + ${CMAKE_CURRENT_FUNCTION_LIST_DIR} + ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/../../ + ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/boards/${BOARD} + ) + + # Add TinyUSB target and port source + family_add_tinyusb(${TARGET} OPT_MCU_${MAX_DEVICE_UPPER}) + target_sources(${TARGET} PUBLIC + ${TOP}/src/portable/mentor/musb/dcd_musb.c + ) + target_compile_options(${TARGET} PRIVATE + -Wno-error=strict-prototypes + ) + target_link_libraries(${TARGET} PUBLIC board_${BOARD}) + + # Flashing + family_add_bin_hex(${TARGET}) + family_flash_jlink(${TARGET}) + + sign_image(${TARGET}) # for secured device such as max32651 + family_flash_openocd_adi(${TARGET}) +endfunction() diff --git a/hw/bsp/maxim/linker/max32650.ld b/hw/bsp/maxim/linker/max32650.ld new file mode 100644 index 000000000..0e56a91ec --- /dev/null +++ b/hw/bsp/maxim/linker/max32650.ld @@ -0,0 +1,119 @@ +MEMORY { + ROM (rx) : ORIGIN = 0x00000000, LENGTH = 0x00010000 /* 64kB ROM */ + FLASH (rx) : ORIGIN = 0x10000000, LENGTH = 0x00300000 /* 3MB flash */ + SRAM (rwx) : ORIGIN = 0x20000000, LENGTH = 0x00100000 /* 1MB SRAM */ +} + +SECTIONS { + .text : + { + _text = .; + KEEP(*(.isr_vector)) + *(.text*) /* program code */ + *(.rodata*) /* read-only data: "const" */ + + KEEP(*(.init)) + KEEP(*(.fini)) + + /* .ctors */ + *crtbegin.o(.ctors) + *crtbegin?.o(.ctors) + *(EXCLUDE_FILE(*crtend?.o *crtend.o) .ctors) + *(SORT(.ctors.*)) + *(.ctors) + + /* .dtors */ + *crtbegin.o(.dtors) + *crtbegin?.o(.dtors) + *(EXCLUDE_FILE(*crtend?.o *crtend.o) .dtors) + *(SORT(.dtors.*)) + *(.dtors) + + /* C++ Exception handling */ + KEEP(*(.eh_frame*)) + _etext = .; + } > FLASH + + .ARM.extab : + { + *(.ARM.extab* .gnu.linkonce.armextab.*) + } > FLASH + + /* it's used for C++ exception handling */ + /* we need to keep this to avoid overlapping */ + .ARM.exidx : + { + __exidx_start = .; + *(.ARM.exidx* .gnu.linkonce.armexidx.*) + __exidx_end = .; + } > FLASH + + .data : + { + _data = ALIGN(., 4); + *(vtable) + *(.data*) /*read-write initialized data: initialized global variable*/ + *(.spix_config*) /* SPIX configuration functions need to be run from SRAM */ + *(.flashprog*) /* Flash program */ + + + /* These array sections are used by __libc_init_array to call static C++ constructors */ + . = ALIGN(4); + /* preinit data */ + PROVIDE_HIDDEN (__preinit_array_start = .); + KEEP(*(.preinit_array)) + PROVIDE_HIDDEN (__preinit_array_end = .); + + . = ALIGN(4); + /* init data */ + PROVIDE_HIDDEN (__init_array_start = .); + KEEP(*(SORT(.init_array.*))) + KEEP(*(.init_array)) + PROVIDE_HIDDEN (__init_array_end = .); + + . = ALIGN(4); + /* finit data */ + PROVIDE_HIDDEN (__fini_array_start = .); + KEEP(*(SORT(.fini_array.*))) + KEEP(*(.fini_array)) + PROVIDE_HIDDEN (__fini_array_end = .); + + _edata = ALIGN(., 4); + } > SRAM AT>FLASH + __load_data = LOADADDR(.data); + .bss : + { + . = ALIGN(4); + _bss = .; + *(.bss*) /*read-write zero initialized data: uninitialized global variable*/ + *(COMMON) + _ebss = ALIGN(., 4); + } > SRAM + + /* Set stack top to end of RAM, and stack limit move down by + * size of stack_dummy section */ + __StackTop = ORIGIN(SRAM) + LENGTH(SRAM); + __StackLimit = __StackTop - SIZEOF(.stack_dummy); + + /* .stack_dummy section doesn't contains any symbols. It is only + * used for linker to calculate size of stack sections, and assign + * values to stack symbols later */ + .stack_dummy (COPY): + { + *(.stack*) + } > SRAM + + .heap (COPY): + { + . = ALIGN(4); + PROVIDE ( end = . ); + PROVIDE ( _end = . ); + *(.heap*) + __HeapLimit = ABSOLUTE(__StackLimit); + } > SRAM + + PROVIDE(__stack = __StackTop); + + /* Check if data + heap + stack exceeds RAM limit */ + ASSERT(__StackLimit >= _ebss, "region RAM overflowed with stack") +} diff --git a/hw/bsp/maxim/linker/max32651.ld b/hw/bsp/maxim/linker/max32651.ld new file mode 100644 index 000000000..3921d10f2 --- /dev/null +++ b/hw/bsp/maxim/linker/max32651.ld @@ -0,0 +1,132 @@ +MEMORY { + HEADER (rx): ORIGIN = 0x10000000, LENGTH = 0x200 + FLASH (rx) : ORIGIN = 0x10000200, LENGTH = 0x002FFE00 /* 3MB flash */ + SRAM (rwx) : ORIGIN = 0x20000000, LENGTH = 0x00100000 /* 1MB SRAM */ +} + +/* Added Oct 9, 2018 to go to correct reset vector. */ +ENTRY(Reset_Handler) +PROVIDE( _start_SWAP = (((Reset_Handler) >> 24) | (((Reset_Handler) & 0x00FF0000) >> 8) | (((Reset_Handler) & 0x0000FF00) << 8) | ((Reset_Handler) << 24))); +PROVIDE_HIDDEN( _SLA_Size = _endimage - __end_header ); +PROVIDE( _SLA_Size_SWAP = (((_SLA_Size) >> 24) | (((_SLA_Size) & 0x00FF0000) >> 8) | (((_SLA_Size) & 0x0000FF00) << 8) | ((_SLA_Size) << 24))); + +/* Sections Definitions */ +SECTIONS { + .sb_sla_header : ALIGN(4) + { + FILL(0xFF) + KEEP(*(.sb_sla_header)) /* Header for ROM code */ + __end_header = . ; + . = ALIGN(512); + } > HEADER + + .text : + { + _text = .; + KEEP(*(.isr_vector)) + *(.text*) /* program code */ + *(.rodata*) /* read-only data: "const" */ + + KEEP(*(.init)) + KEEP(*(.fini)) + + /* C++ Exception handling */ + KEEP(*(.eh_frame*)) + _etext = .; + } > FLASH + + /* it's used for C++ exception handling */ + /* we need to keep this to avoid overlapping */ + .ARM.exidx : + { + __exidx_start = .; + *(.ARM.exidx*) + __exidx_end = .; + } > FLASH + + .data : + { + _data = ALIGN(., 4); + *(.data*) /*read-write initialized data: initialized global variable*/ + *(.spix_config*) /* SPIX configuration functions need to be run from SRAM */ + *(.flashprog*) /* Flash program */ + + + /* These array sections are used by __libc_init_array to call static C++ constructors */ + . = ALIGN(4); + /* preinit data */ + PROVIDE_HIDDEN (__preinit_array_start = .); + KEEP(*(.preinit_array)) + PROVIDE_HIDDEN (__preinit_array_end = .); + + . = ALIGN(4); + /* init data */ + PROVIDE_HIDDEN (__init_array_start = .); + KEEP(*(SORT(.init_array.*))) + KEEP(*(.init_array)) + PROVIDE_HIDDEN (__init_array_end = .); + + . = ALIGN(4); + /* finit data */ + PROVIDE_HIDDEN (__fini_array_start = .); + KEEP(*(SORT(.fini_array.*))) + KEEP(*(.fini_array)) + PROVIDE_HIDDEN (__fini_array_end = .); + + _edata = ALIGN(., 4); + } > SRAM AT>FLASH + __load_data = LOADADDR(.data); + _enddata = LOADADDR(.data)+SIZEOF(.data); + + .sb_sla_trailer : AT(_enddata) + { + KEEP(*(.sb_sla_trailer)) + /* Align image with 16 byte boundary to conform to flash encryption block size. */ + FILL(0xDEADC0DE); + /* NOTE: The FILL and ALIGN will not work unless something is written to the section. So, we use LONG. */ + LONG(0xDEADC0DE); + . = ALIGN(16); + } > FLASH + _endimage = LOADADDR(.sb_sla_trailer)+SIZEOF(.sb_sla_trailer); + .sig : + { + KEEP(*(.sig)) + LONG(0xDEADBEEF); + + } > FLASH + .bss : + { + . = ALIGN(4); + _bss = .; + *(.bss*) /*read-write zero initialized data: uninitialized global variable*/ + *(COMMON) + _ebss = ALIGN(., 4); + } > SRAM + + /* Set stack top to end of RAM, and stack limit move down by + * size of stack_dummy section */ + __StackTop = ORIGIN(SRAM) + LENGTH(SRAM); + __StackLimit = __StackTop - SIZEOF(.stack_dummy); + + /* .stack_dummy section doesn't contains any symbols. It is only + * used for linker to calculate size of stack sections, and assign + * values to stack symbols later */ + .stack_dummy (COPY): + { + *(.stack*) + } > SRAM + + .heap (COPY): + { + . = ALIGN(4); + PROVIDE ( end = . ); + PROVIDE ( _end = . ); + *(.heap*) + __HeapLimit = ABSOLUTE(__StackLimit); + } > SRAM + + PROVIDE(__stack = __StackTop); + + /* Check if data + heap + stack exceeds RAM limit */ + ASSERT(__StackLimit >= _ebss, "region RAM overflowed with stack") +} diff --git a/hw/bsp/maxim/linker/max32665.ld b/hw/bsp/maxim/linker/max32665.ld new file mode 100644 index 000000000..06c124247 --- /dev/null +++ b/hw/bsp/maxim/linker/max32665.ld @@ -0,0 +1,135 @@ +/* SPID and SPIX Sections here are maximum possible sizes */ +/* If used, they should be adjusted for the external Flash/RAM size */ +MEMORY { + + SPIX (rx) : ORIGIN = 0x08000000, LENGTH = 0x08000000 + FLASH (rx) : ORIGIN = 0x10000000, LENGTH = 0x00100000 + SRAM (rwx) : ORIGIN = 0x20000000, LENGTH = 0x0008C000 + SPID (rw) : ORIGIN = 0x80000000, LENGTH = 512M +} + +/* Sections Definitions */ +SECTIONS { + .text : + { + _text = .; + KEEP(*(.isr_vector)) + *(.text*) /* program code */ + *(.rodata*) /* read-only data: "const" */ + + KEEP(*(.init)) + KEEP(*(.fini)) + + /* .ctors */ + *crtbegin.o(.ctors) + *crtbegin?.o(.ctors) + *(EXCLUDE_FILE(*crtend?.o *crtend.o) .ctors) + *(SORT(.ctors.*)) + *(.ctors) + + /* .dtors */ + *crtbegin.o(.dtors) + *crtbegin?.o(.dtors) + *(EXCLUDE_FILE(*crtend?.o *crtend.o) .dtors) + *(SORT(.dtors.*)) + *(.dtors) + + /* C++ Exception handling */ + KEEP(*(.eh_frame*)) + _etext = .; + } > FLASH + + .ARM.extab : + { + *(.ARM.extab* .gnu.linkonce.armextab.*) + } > FLASH + + /* This section will keep the SPIX data until loaded into the external device */ + /* Upon initialization of SPIX (user code needs to do this) */ + .xip_section : + { + KEEP(*(.xip_section*)) + } > SPIX AT>FLASH + + __load_start_xip = LOADADDR(.xip_section); + __load_length_xip = SIZEOF(.xip_section); + + /* it's used for C++ exception handling */ + /* we need to keep this to avoid overlapping */ + .ARM.exidx : + { + __exidx_start = .; + *(.ARM.exidx* .gnu.linkonce.armexidx.*) + __exidx_end = .; + } > FLASH + + .data : + { + _data = ALIGN(., 4); + *(vtable) + *(.data*) /*read-write initialized data: initialized global variable*/ + *(.spix_config*) /* SPIX configuration functions need to be run from SRAM */ + *(.flashprog*) /* Flash program */ + + + /* These array sections are used by __libc_init_array to call static C++ constructors */ + . = ALIGN(4); + /* preinit data */ + PROVIDE_HIDDEN (__preinit_array_start = .); + KEEP(*(.preinit_array)) + PROVIDE_HIDDEN (__preinit_array_end = .); + + . = ALIGN(4); + /* init data */ + PROVIDE_HIDDEN (__init_array_start = .); + KEEP(*(SORT(.init_array.*))) + KEEP(*(.init_array)) + PROVIDE_HIDDEN (__init_array_end = .); + + . = ALIGN(4); + /* finit data */ + PROVIDE_HIDDEN (__fini_array_start = .); + KEEP(*(SORT(.fini_array.*))) + KEEP(*(.fini_array)) + PROVIDE_HIDDEN (__fini_array_end = .); + + _edata = ALIGN(., 4); + } > SRAM AT>FLASH + __load_data = LOADADDR(.data); + + .bss : + { + . = ALIGN(4); + _bss = .; + *(.bss*) /*read-write zero initialized data: uninitialized global variable*/ + *(COMMON) + _ebss = ALIGN(., 4); + } > SRAM + + /* Setup the stack for Core 1, it will only be used if the user code + * includes a definition of Stack_Size_Core1, which defines the space + * reserved above the main core's stack for core 1's stack */ + + __StackTop_Core1 = ORIGIN(SRAM) + LENGTH(SRAM); + __StackLimit_Core1 = DEFINED(Stack_Size_Core1) ? __StackTop_Core1 - Stack_Size_Core1 : __StackTop_Core1; + + /* Set stack top to end of RAM, and stack limit move down by Stack_Size. + * If core 1 is used, set the stack to the bottom of Core 1's stack region */ + + __StackTop = DEFINED(Stack_Size_Core1) ? __StackLimit_Core1 : ORIGIN(SRAM) + LENGTH(SRAM); + __StackLimit = __StackTop - Stack_Size; + + .heap (COPY): + { + . = ALIGN(4); + PROVIDE ( end = . ); + PROVIDE ( _end = . ); + *(.heap*) + __HeapLimit = ABSOLUTE(__StackLimit); + } > SRAM + + PROVIDE(__stack = __StackTop); + + /* Check if data + heap + stack(s) exceeds RAM limit */ + ASSERT(__StackLimit >= _ebss, "region RAM overflowed with stack") +} diff --git a/hw/bsp/maxim/linker/max32690.ld b/hw/bsp/maxim/linker/max32690.ld new file mode 100644 index 000000000..64b906a54 --- /dev/null +++ b/hw/bsp/maxim/linker/max32690.ld @@ -0,0 +1,164 @@ +MEMORY { + ROM (rx) : ORIGIN = 0x00000000, LENGTH = 0x00020000 /* 128kB ROM */ + FLASH (rx) : ORIGIN = 0x10000000, LENGTH = 0x00340000 + SRAM (rwx) : ORIGIN = 0x20000000, LENGTH = 0x00100000 + + /* + * Note that CS0/CS1 address mappings may be reversed using MXC_HPC->mbr0 and ->mbr1 + * The following mappings are selected for simplicity + */ + HPB_CS0 (rwx) : ORIGIN = 0x60000000, LENGTH = 0x10000000 /* External Hyperbus/Xccelabus chip select 0 */ + HPB_CS1 (rwx) : ORIGIN = 0x70000000, LENGTH = 0x10000000 /* External Hyperbus/Xccelabus chip select 1 */ +} + +SECTIONS { + .rom : + { + KEEP(*(.rom_vector)) + *(.rom_handlers*) + } > ROM + + .text : + { + _text = .; + KEEP(*(.isr_vector)) + EXCLUDE_FILE (*riscv.o) *(.text*) /* program code, exclude RISCV code */ + *(.rodata*) /* read-only data: "const" */ + + KEEP(*(.init)) + KEEP(*(.fini)) + + /* .ctors */ + *crtbegin.o(.ctors) + *crtbegin?.o(.ctors) + *(EXCLUDE_FILE(*crtend?.o *crtend.o) .ctors) + *(SORT(.ctors.*)) + *(.ctors) + + /* .dtors */ + *crtbegin.o(.dtors) + *crtbegin?.o(.dtors) + *(EXCLUDE_FILE(*crtend?.o *crtend.o) .dtors) + *(SORT(.dtors.*)) + *(.dtors) + + /* C++ Exception handling */ + KEEP(*(.eh_frame*)) + _etext = .; + } > FLASH + + .ARM.extab : + { + *(.ARM.extab* .gnu.linkonce.armextab.*) + } > FLASH + + /* These sections allow code to be compiled/linked for HPB addresses, but reside in + * flash until copied by code to the external HPB flash device + */ + .hpb_cs0_section : + { + __hpb_cs0_start = ABSOLUTE(.); + KEEP(*(.hpb_cs0_section*)) + } > HPB_CS0 AT>FLASH + + __load_start_hpb_cs0 = LOADADDR(.hpb_cs0_section); + __load_length_hpb_cs0 = SIZEOF(.hpb_cs0_section); + + .hpb_cs1_section : + { + __hpb_cs1_start = ABSOLUTE(.); + KEEP(*(.hpb_cs1_section*)) + } > HPB_CS1 AT>FLASH + + __load_start_hpb_cs1 = LOADADDR(.hpb_cs1_section); + __load_length_hpb_cs1 = SIZEOF(.hpb_cs1_section); + + /* Binary import */ + .bin_storage : + { + FILL(0xFF) + _bin_start_ = .; + KEEP(*(.bin_storage_img)) + _bin_end_ = .; + . = ALIGN(4); + } > FLASH + + /* it's used for C++ exception handling */ + /* we need to keep this to avoid overlapping */ + .ARM.exidx : + { + __exidx_start = .; + *(.ARM.exidx* .gnu.linkonce.armexidx.*) + __exidx_end = .; + } > FLASH + + .data : + { + _data = ALIGN(., 4); + *(vtable) + *(.data*) /*read-write initialized data: initialized global variable*/ + + /* These array sections are used by __libc_init_array to call static C++ constructors */ + . = ALIGN(4); + /* preinit data */ + PROVIDE_HIDDEN (__preinit_array_start = .); + KEEP(*(.preinit_array)) + PROVIDE_HIDDEN (__preinit_array_end = .); + + . = ALIGN(4); + /* init data */ + PROVIDE_HIDDEN (__init_array_start = .); + KEEP(*(SORT(.init_array.*))) + KEEP(*(.init_array)) + PROVIDE_HIDDEN (__init_array_end = .); + + . = ALIGN(4); + /* finit data */ + PROVIDE_HIDDEN (__fini_array_start = .); + KEEP(*(SORT(.fini_array.*))) + KEEP(*(.fini_array)) + PROVIDE_HIDDEN (__fini_array_end = .); + + /* Run the flash programming functions from SRAM */ + *(.flashprog) + + _edata = ALIGN(., 4); + } > SRAM AT>FLASH + __load_data = LOADADDR(.data); + + .bss : + { + . = ALIGN(4); + _bss = .; + *(.bss*) /*read-write zero initialized data: uninitialized global variable*/ + *(COMMON) + _ebss = ALIGN(., 4); + } > SRAM + + /* Set stack top to end of RAM, and stack limit move down by + * size of stack_dummy section */ + __StackTop = ORIGIN(SRAM) + LENGTH(SRAM); + __StackLimit = __StackTop - SIZEOF(.stack_dummy); + + /* .stack_dummy section doesn't contains any symbols. It is only + * used for linker to calculate size of stack sections, and assign + * values to stack symbols later */ + .stack_dummy (COPY): + { + *(.stack*) + } > SRAM + + .heap (COPY): + { + . = ALIGN(4); + PROVIDE ( end = . ); + PROVIDE ( _end = . ); + *(.heap*) + __HeapLimit = ABSOLUTE(__StackLimit); + } > SRAM + + PROVIDE(__stack = __StackTop); + + /* Check if data + heap + stack exceeds RAM limit */ + ASSERT(__StackLimit >= _ebss, "region RAM overflowed with stack") +} diff --git a/hw/bsp/maxim/linker/max78002.ld b/hw/bsp/maxim/linker/max78002.ld new file mode 100644 index 000000000..e5c4866ee --- /dev/null +++ b/hw/bsp/maxim/linker/max78002.ld @@ -0,0 +1,182 @@ +MEMORY { + ROM (rx) : ORIGIN = 0x00000000, LENGTH = 0x00010000 /* 64 kB ROM */ + FLASH (rx) : ORIGIN = 0x10000000, LENGTH = 0x00280000 /* 2.5 MB Flash */ + SRAM (rwx) : ORIGIN = 0x20000000, LENGTH = 0x00060000 /* 384 kB SRAM */ + /*CSI2 (rwx) : ORIGIN = 0x2001F000, LENGTH = 0x00001000 4096 B CSI2 Buffer */ +} + +SECTIONS { + .rom : + { + KEEP(*(.rom_vector)) + *(.rom_handlers*) + } > ROM + + .text : + { + _text = .; + KEEP(*(.isr_vector)) + EXCLUDE_FILE (*riscv.o) *(.text*) /* Program code (exclude RISCV code) */ + *(.rodata*) /* read-only data: "const" */ + + KEEP(*(.init)) + KEEP(*(.fini)) + + /* .ctors */ + *crtbegin.o(.ctors) + *crtbegin?.o(.ctors) + *(EXCLUDE_FILE(*crtend?.o *crtend.o) .ctors) + *(SORT(.ctors.*)) + *(.ctors) + + /* .dtors */ + *crtbegin.o(.dtors) + *crtbegin?.o(.dtors) + *(EXCLUDE_FILE(*crtend?.o *crtend.o) .dtors) + *(SORT(.dtors.*)) + *(.dtors) + + /* C++ Exception handling */ + KEEP(*(.eh_frame*)) + _etext = .; + } > FLASH + + .ARM.extab : + { + *(.ARM.extab* .gnu.linkonce.armextab.*) + } > FLASH + + /* Binary import */ + .bin_storage : + { + FILL(0xFF) + _bin_start_ = .; + KEEP(*(.bin_storage_img)) + _bin_end_ = .; + . = ALIGN(4); + } > FLASH + + .rom_code : + { + . = ALIGN(16); + _sran_code = .; + *(.rom_code_section) + _esran_code = .; + } > ROM + + .flash_code : + { + . = ALIGN(16); + _sran_code = .; + *(.flash_code_section) + _esran_code = .; + } > FLASH + + .sram_code : + { + . = ALIGN(16); + _sran_code = .; + *(.sram_code_section) + _esran_code = .; + } > SRAM + + /* it's used for C++ exception handling */ + /* we need to keep this to avoid overlapping */ + .ARM.exidx : + { + __exidx_start = .; + *(.ARM.exidx* .gnu.linkonce.armexidx.*) + __exidx_end = .; + } > FLASH + + .data : + { + _data = ALIGN(., 4); + _csi = . + 0x20000; + *(vtable) + *(.data*) /*read-write initialized data: initialized global variable*/ + + + /* These array sections are used by __libc_init_array to call static C++ constructors */ + . = ALIGN(4); + /* preinit data */ + PROVIDE_HIDDEN (__preinit_array_start = .); + KEEP(*(.preinit_array)) + PROVIDE_HIDDEN (__preinit_array_end = .); + + . = ALIGN(4); + /* init data */ + PROVIDE_HIDDEN (__init_array_start = .); + KEEP(*(SORT(.init_array.*))) + KEEP(*(.init_array)) + PROVIDE_HIDDEN (__init_array_end = .); + + . = ALIGN(4); + /* finit data */ + PROVIDE_HIDDEN (__fini_array_start = .); + KEEP(*(SORT(.fini_array.*))) + KEEP(*(.fini_array)) + PROVIDE_HIDDEN (__fini_array_end = .); + + _edata = ALIGN(., 4); + + } > SRAM AT>FLASH + __load_data = LOADADDR(.data); + + .bss : + { + . = ALIGN(4); + _bss = .; + *(.bss*) /*read-write zero initialized data: uninitialized global variable*/ + *(COMMON) + _ebss = ALIGN(., 4); + } > SRAM + + .shared : + { + . = ALIGN(4); + _shared = .; + *(.mailbox*) + . = ALIGN(4); + *(.shared*) /*read-write zero initialized data: uninitialized global variable*/ + _eshared = ALIGN(., 4); + } > SRAM + __shared_data = LOADADDR(.shared); + + /* Set stack top to end of RAM, and stack limit move down by + * size of stack_dummy section */ + __StackTop = ORIGIN(SRAM) + LENGTH(SRAM); + __StackLimit = __StackTop - SIZEOF(.stack_dummy); + + /* .stack_dummy section doesn't contains any symbols. It is only + * used for linker to calculate size of stack sections, and assign + * values to stack symbols later */ + .stack_dummy (COPY): + { + *(.stack*) + } > SRAM + + .heap (COPY): + { + . = ALIGN(4); + PROVIDE ( end = . ); + PROVIDE ( _end = . ); + *(.heap*) + __HeapLimit = ABSOLUTE(__StackLimit); + } > SRAM + + PROVIDE(__stack = __StackTop); + + /* Check if data + heap + stack exceeds RAM limit */ + ASSERT(__StackLimit >= _ebss, "region RAM overflowed with stack") + + /* Section used by RISCV loader projects. See RISCV_LOAD documentation in the build system. */ + .riscv_flash : + { + /* Align address to mod 256 with a small offset. This is required to match the flash page size.*/ + . = ALIGN(256); /* ALIGN operatator is used here. Note that (. & 0x1FFFFF00) was used in the past, but a strange bug was seen on Windows where the & did not behave as expected.*/ + . += 0x100; + _riscv_boot = .; + KEEP(*riscv.o (.text*)) + } > FLASH +} diff --git a/tools/get_deps.py b/tools/get_deps.py index 1ce8be6c7..635edaa66 100755 --- a/tools/get_deps.py +++ b/tools/get_deps.py @@ -25,9 +25,9 @@ deps_optional = { 'hw/mcu/allwinner': ['https://github.com/hathach/allwinner_driver.git', '8e5e89e8e132c0fd90e72d5422e5d3d68232b756', 'fc100s'], - 'hw/mcu/analog/max32' : ['https://github.com/analogdevicesinc/msdk.git', + 'hw/mcu/analog/msdk' : ['https://github.com/analogdevicesinc/msdk.git', 'b20b398d3e5e2007594e54a74ba3d2a2e50ddd75', - 'max32650 max32666 max32690 max78002'], + 'maxim'], 'hw/mcu/bridgetek/ft9xx/ft90x-sdk': ['https://github.com/BRTSG-FOSS/ft90x-sdk.git', '91060164afe239fcb394122e8bf9eb24d3194eb1', 'brtmm90x'], -- cgit v1.3.1 From 76b7468c746af5ad8496e9ed512366af249f972f Mon Sep 17 00:00:00 2001 From: hathach Date: Thu, 12 Jun 2025 15:08:46 +0700 Subject: ci skip clang/iar build for stm32n6 add stm32-tcpp0203 driver as dependency for h7rs and n6 --- .github/workflows/ci_set_matrix.py | 3 +- .../stm32h7rs/boards/stm32h7s3nucleo/board.cmake | 11 +- hw/bsp/stm32h7rs/boards/stm32h7s3nucleo/board.mk | 10 +- .../boards/stm32h7s3nucleo/tcpp0203/LICENSE.txt | 6 - .../stm32h7s3nucleo/tcpp0203/Release_Notes.html | 205 --- .../stm32h7s3nucleo/tcpp0203/_htmresc/favicon.png | Bin 4126 -> 0 bytes .../tcpp0203/_htmresc/mini-st_2020.css | 1703 -------------------- .../tcpp0203/_htmresc/st_logo_2020.png | Bin 7520 -> 0 bytes .../boards/stm32h7s3nucleo/tcpp0203/tcpp0203.c | 886 ---------- .../boards/stm32h7s3nucleo/tcpp0203/tcpp0203.h | 353 ---- .../boards/stm32h7s3nucleo/tcpp0203/tcpp0203_reg.c | 73 - .../boards/stm32h7s3nucleo/tcpp0203/tcpp0203_reg.h | 98 -- hw/bsp/stm32h7rs/family.cmake | 3 + hw/bsp/stm32h7rs/family.mk | 3 + hw/bsp/stm32n6/boards/stm32n657nucleo/board.cmake | 8 +- hw/bsp/stm32n6/boards/stm32n657nucleo/board.mk | 6 +- .../boards/stm32n657nucleo/tcpp0203/LICENSE.txt | 6 - .../stm32n657nucleo/tcpp0203/Release_Notes.html | 205 --- .../stm32n657nucleo/tcpp0203/_htmresc/favicon.png | Bin 4126 -> 0 bytes .../tcpp0203/_htmresc/mini-st_2020.css | 1703 -------------------- .../tcpp0203/_htmresc/st_logo_2020.png | Bin 7520 -> 0 bytes .../boards/stm32n657nucleo/tcpp0203/tcpp0203.c | 886 ---------- .../boards/stm32n657nucleo/tcpp0203/tcpp0203.h | 353 ---- .../boards/stm32n657nucleo/tcpp0203/tcpp0203_reg.c | 73 - .../boards/stm32n657nucleo/tcpp0203/tcpp0203_reg.h | 98 -- hw/bsp/stm32n6/family.cmake | 1 + hw/bsp/stm32n6/family.mk | 1 + tools/get_deps.py | 3 + 28 files changed, 25 insertions(+), 6672 deletions(-) delete mode 100644 hw/bsp/stm32h7rs/boards/stm32h7s3nucleo/tcpp0203/LICENSE.txt delete mode 100644 hw/bsp/stm32h7rs/boards/stm32h7s3nucleo/tcpp0203/Release_Notes.html delete mode 100644 hw/bsp/stm32h7rs/boards/stm32h7s3nucleo/tcpp0203/_htmresc/favicon.png delete mode 100644 hw/bsp/stm32h7rs/boards/stm32h7s3nucleo/tcpp0203/_htmresc/mini-st_2020.css delete mode 100644 hw/bsp/stm32h7rs/boards/stm32h7s3nucleo/tcpp0203/_htmresc/st_logo_2020.png delete mode 100644 hw/bsp/stm32h7rs/boards/stm32h7s3nucleo/tcpp0203/tcpp0203.c delete mode 100644 hw/bsp/stm32h7rs/boards/stm32h7s3nucleo/tcpp0203/tcpp0203.h delete mode 100644 hw/bsp/stm32h7rs/boards/stm32h7s3nucleo/tcpp0203/tcpp0203_reg.c delete mode 100644 hw/bsp/stm32h7rs/boards/stm32h7s3nucleo/tcpp0203/tcpp0203_reg.h delete mode 100644 hw/bsp/stm32n6/boards/stm32n657nucleo/tcpp0203/LICENSE.txt delete mode 100644 hw/bsp/stm32n6/boards/stm32n657nucleo/tcpp0203/Release_Notes.html delete mode 100644 hw/bsp/stm32n6/boards/stm32n657nucleo/tcpp0203/_htmresc/favicon.png delete mode 100644 hw/bsp/stm32n6/boards/stm32n657nucleo/tcpp0203/_htmresc/mini-st_2020.css delete mode 100644 hw/bsp/stm32n6/boards/stm32n657nucleo/tcpp0203/_htmresc/st_logo_2020.png delete mode 100644 hw/bsp/stm32n6/boards/stm32n657nucleo/tcpp0203/tcpp0203.c delete mode 100644 hw/bsp/stm32n6/boards/stm32n657nucleo/tcpp0203/tcpp0203.h delete mode 100644 hw/bsp/stm32n6/boards/stm32n657nucleo/tcpp0203/tcpp0203_reg.c delete mode 100644 hw/bsp/stm32n6/boards/stm32n657nucleo/tcpp0203/tcpp0203_reg.h (limited to 'tools') diff --git a/.github/workflows/ci_set_matrix.py b/.github/workflows/ci_set_matrix.py index 048c5f0ce..ddb3ee1fb 100755 --- a/.github/workflows/ci_set_matrix.py +++ b/.github/workflows/ci_set_matrix.py @@ -41,7 +41,8 @@ family_list = { "stm32f7": ["arm-gcc", "arm-clang", "arm-iar"], "stm32g0 stm32g4 stm32h5": ["arm-gcc", "arm-clang", "arm-iar"], "stm32h7 stm32h7rs": ["arm-gcc", "arm-clang", "arm-iar"], - "stm32l0 stm32l4 stm32n6": ["arm-gcc", "arm-clang", "arm-iar"], + "stm32l0 stm32l4": ["arm-gcc", "arm-clang", "arm-iar"], + "stm32n6": ["arm-gcc"], "stm32u5 stm32wb": ["arm-gcc", "arm-clang", "arm-iar"], "xmc4000": ["arm-gcc"], "-bespressif_s2_devkitc": ["esp-idf"], diff --git a/hw/bsp/stm32h7rs/boards/stm32h7s3nucleo/board.cmake b/hw/bsp/stm32h7rs/boards/stm32h7s3nucleo/board.cmake index ea9ffacf4..f52b70408 100644 --- a/hw/bsp/stm32h7rs/boards/stm32h7s3nucleo/board.cmake +++ b/hw/bsp/stm32h7rs/boards/stm32h7s3nucleo/board.cmake @@ -6,19 +6,14 @@ set(LD_FILE_Clang ${LD_FILE_GNU}) set(LD_FILE_IAR ${CMAKE_CURRENT_LIST_DIR}/stm32h7s3xx_flash.icf) function(update_board TARGET) - target_compile_definitions(${TARGET} PUBLIC STM32H7S3xx - SEGGER_RTT_SECTION="noncacheable_buffer" - BUFFER_SIZE_UP=0x3000 ) - target_sources(${TARGET} PUBLIC - # BSP - ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/tcpp0203/tcpp0203.c - ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/tcpp0203/tcpp0203_reg.c + ${ST_TCPP0203}/tcpp0203.c + ${ST_TCPP0203}/tcpp0203_reg.c ) target_include_directories(${TARGET} PUBLIC - ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/tcpp0203 + ${ST_TCPP0203} ) endfunction() diff --git a/hw/bsp/stm32h7rs/boards/stm32h7s3nucleo/board.mk b/hw/bsp/stm32h7rs/boards/stm32h7s3nucleo/board.mk index 1946f523c..cf0c2ff54 100644 --- a/hw/bsp/stm32h7rs/boards/stm32h7s3nucleo/board.mk +++ b/hw/bsp/stm32h7rs/boards/stm32h7s3nucleo/board.mk @@ -12,12 +12,8 @@ LD_FILE_GCC = $(BOARD_PATH)/stm32h7s3xx_flash.ld LD_FILE_IAR = $(BOARD_PATH)/stm32h7s3xx_flash.icf SRC_C += \ - $(BOARD_PATH)/tcpp0203/tcpp0203.c \ - $(BOARD_PATH)/tcpp0203/tcpp0203_reg.c \ + $(ST_TCPP0203)/tcpp0203.c \ + $(ST_TCPP0203)/tcpp0203_reg.c \ INC += \ - $(TOP)/$(BOARD_PATH)/tcpp0203 \ - -CFLAGS += \ - -DSEGGER_RTT_SECTION=\"noncacheable_buffer\" \ - -DBUFFER_SIZE_UP=0x3000 \ + $(TOP)/$(ST_TCPP0203) \ diff --git a/hw/bsp/stm32h7rs/boards/stm32h7s3nucleo/tcpp0203/LICENSE.txt b/hw/bsp/stm32h7rs/boards/stm32h7s3nucleo/tcpp0203/LICENSE.txt deleted file mode 100644 index 1cbbc544a..000000000 --- a/hw/bsp/stm32h7rs/boards/stm32h7s3nucleo/tcpp0203/LICENSE.txt +++ /dev/null @@ -1,6 +0,0 @@ -This software component is provided to you as part of a software package and -applicable license terms are in the Package_license file. If you received this -software component outside of a package or without applicable license terms, -the terms of the BSD-3-Clause license shall apply. -You may obtain a copy of the BSD-3-Clause at: -https://opensource.org/licenses/BSD-3-Clause diff --git a/hw/bsp/stm32h7rs/boards/stm32h7s3nucleo/tcpp0203/Release_Notes.html b/hw/bsp/stm32h7rs/boards/stm32h7s3nucleo/tcpp0203/Release_Notes.html deleted file mode 100644 index 6bbba86a4..000000000 --- a/hw/bsp/stm32h7rs/boards/stm32h7s3nucleo/tcpp0203/Release_Notes.html +++ /dev/null @@ -1,205 +0,0 @@ - - - - - - - Release Notes for TCPP0203 Component Driver - - - - - - -
-
-
-

Release Notes for TCPP0203 Component Driver

-

Copyright © 2020 STMicroelectronics
-

- -
-

Purpose

-

This driver provides a set of functions needed to drive TCPP0203 Type-C Port Protection component

-
-
-

Update History

-
- -
-

Main Changes

-

Maintenance release

-

Contents

- - - - - - - - - - - -
Headline
MISRA Rule-81.13 correction on TCPP0203 component driver files
-

Backward compatibility

-

No compatibility break with previous version

-

Dependencies

-
-
-
- -
-

Main Changes

-

Maintenance release

-

Contents

- - - - - - - - - - - - -
Fixed bugs list
Headline
MISRA corrections on TCPP0203 component driver files
-

Known Limitations

-

Outstanding bugs list : None

-

Requirements not met or planned in a forthcoming release : None

-

Development Toolchains and Compilers

-
    -
  • IAR Embedded Workbench for ARM (EWARM) toolchain V8.32.3
    • -
  • RealView Microcontroller Development Kit (MDK-ARM) toolchain V5.27.1
    • -
  • STM32CubeIDE toolchain V1.8.0
    • -
-

Backward compatibility

-

No compatibility break with previous version

-

Dependencies

-
-
-
- -
-

Main Changes

-

Maintenance release

-

Contents

- - - - - - - - - - - - -
Fixed bugs list
Headline
License updates
-

Known Limitations

-

Outstanding bugs list : None

-

Requirements not met or planned in a forthcoming release : None

-

Development Toolchains and Compilers

-
    -
  • IAR Embedded Workbench for ARM (EWARM) toolchain V8.32.3
    • -
  • RealView Microcontroller Development Kit (MDK-ARM) toolchain V5.27.1
    • -
  • STM32CubeIDE toolchain V1.6.0
    • -
-

Backward compatibility

-

No compatibility break with previous version

-

Dependencies

-
-
-
- -
-

Main Changes

-

Maintenance release

-

Contents

- - - - - - - - - - - - -
Fixed bugs list
Headline
CodeSpell correction on TCPP0203 component driver files
-

Known Limitations

-

Outstanding bugs list : None

-

Requirements not met or planned in a forthcoming release : None

-

Development Toolchains and Compilers

-
    -
  • IAR Embedded Workbench for ARM (EWARM) toolchain V8.32.3
    • -
  • RealView Microcontroller Development Kit (MDK-ARM) toolchain V5.27.1
    • -
  • STM32CubeIDE toolchain V1.5.0
    • -
-

Backward compatibility

-

No compatibility break with previous version

-

Dependencies

-
-
-
- -
-

Main Changes

-

Maintenance release

-

Contents

- - - - - - - - - - - - -
Fixed bugs list
Headline
MCUAstyle correction on TCPP0203 component driver files
-

Known Limitations

-

Outstanding bugs list : None

-

Requirements not met or planned in a forthcoming release : None

-

Development Toolchains and Compilers

-
    -
  • IAR Embedded Workbench for ARM (EWARM) toolchain V8.32.3
    • -
  • RealView Microcontroller Development Kit (MDK-ARM) toolchain V5.27.1
    • -
  • STM32CubeIDE toolchain V1.5.0
    • -
-

Backward compatibility

-

No compatibility break with previous version

-

Dependencies

-
-
-
- -
-

Main Changes

-
    -
  • First official release of TCPP0203 Type-C port Protection Component drivers
    • -
-
-
-
-
-
-

For complete documentation on STM32,visit: [www.st.com/stm32]

-This release note uses up to date web standards and, for this reason, should not be opened with Internet Explorer but preferably with popular browsers such as Google Chrome, Mozilla Firefox, Opera or Microsoft Edge. -
- - diff --git a/hw/bsp/stm32h7rs/boards/stm32h7s3nucleo/tcpp0203/_htmresc/favicon.png b/hw/bsp/stm32h7rs/boards/stm32h7s3nucleo/tcpp0203/_htmresc/favicon.png deleted file mode 100644 index 06713eec4..000000000 Binary files a/hw/bsp/stm32h7rs/boards/stm32h7s3nucleo/tcpp0203/_htmresc/favicon.png and /dev/null differ diff --git a/hw/bsp/stm32h7rs/boards/stm32h7s3nucleo/tcpp0203/_htmresc/mini-st_2020.css b/hw/bsp/stm32h7rs/boards/stm32h7s3nucleo/tcpp0203/_htmresc/mini-st_2020.css deleted file mode 100644 index dd19969d1..000000000 --- a/hw/bsp/stm32h7rs/boards/stm32h7s3nucleo/tcpp0203/_htmresc/mini-st_2020.css +++ /dev/null @@ -1,1703 +0,0 @@ -@charset "UTF-8"; -/* - Flavor name: Custom (mini-custom) - Generated online - https://minicss.org/flavors - mini.css version: v3.0.1 -*/ -/* - Browsers resets and base typography. -*/ -/* Core module CSS variable definitions */ -:root { - --fore-color: #03234b; - --secondary-fore-color: #03234b; - --back-color: #ffffff; - --secondary-back-color: #ffffff; - --blockquote-color: #e6007e; - --pre-color: #e6007e; - --border-color: #3cb4e6; - --secondary-border-color: #3cb4e6; - --heading-ratio: 1.2; - --universal-margin: 0.5rem; - --universal-padding: 0.25rem; - --universal-border-radius: 0.075rem; - --background-margin: 1.5%; - --a-link-color: #3cb4e6; - --a-visited-color: #8c0078; } - -html { - font-size: 13.5px; } - -a, b, del, em, i, ins, q, span, strong, u { - font-size: 1em; } - -html, * { - font-family: -apple-system, BlinkMacSystemFont, Helvetica, arial, sans-serif; - line-height: 1.25; - -webkit-text-size-adjust: 100%; } - -* { - font-size: 1rem; } - -body { - margin: 0; - color: var(--fore-color); - @background: var(--back-color); - background: var(--back-color) linear-gradient(#ffd200, #ffd200) repeat-y left top; - background-size: var(--background-margin); - } - -details { - display: block; } - -summary { - display: list-item; } - -abbr[title] { - border-bottom: none; - text-decoration: underline dotted; } - -input { - overflow: visible; } - -img { - max-width: 100%; - height: auto; } - -h1, h2, h3, h4, h5, h6 { - line-height: 1.25; - margin: calc(1.5 * var(--universal-margin)) var(--universal-margin); - font-weight: 400; } - h1 small, h2 small, h3 small, h4 small, h5 small, h6 small { - color: var(--secondary-fore-color); - display: block; - margin-top: -0.25rem; } - -h1 { - font-size: calc(1rem * var(--heading-ratio) * var(--heading-ratio) * var(--heading-ratio)); } - -h2 { - font-size: calc(1rem * var(--heading-ratio) * var(--heading-ratio) ); - border-style: none none solid none ; - border-width: thin; - border-color: var(--border-color); } -h3 { - font-size: calc(1rem * var(--heading-ratio) ); } - -h4 { - font-size: calc(1rem * var(--heading-ratio)); } - -h5 { - font-size: 1rem; } - -h6 { - font-size: calc(1rem / var(--heading-ratio)); } - -p { - margin: var(--universal-margin); } - -ol, ul { - margin: var(--universal-margin); - padding-left: calc(3 * var(--universal-margin)); } - -b, strong { - font-weight: 700; } - -hr { - box-sizing: content-box; - border: 0; - line-height: 1.25em; - margin: var(--universal-margin); - height: 0.0714285714rem; - background: linear-gradient(to right, transparent, var(--border-color) 20%, var(--border-color) 80%, transparent); } - -blockquote { - display: block; - position: relative; - font-style: italic; - color: var(--secondary-fore-color); - margin: var(--universal-margin); - padding: calc(3 * var(--universal-padding)); - border: 0.0714285714rem solid var(--secondary-border-color); - border-left: 0.3rem solid var(--blockquote-color); - border-radius: 0 var(--universal-border-radius) var(--universal-border-radius) 0; } - blockquote:before { - position: absolute; - top: calc(0rem - var(--universal-padding)); - left: 0; - font-family: sans-serif; - font-size: 2rem; - font-weight: 800; - content: "\201c"; - color: var(--blockquote-color); } - blockquote[cite]:after { - font-style: normal; - font-size: 0.75em; - font-weight: 700; - content: "\a— " attr(cite); - white-space: pre; } - -code, kbd, pre, samp { - font-family: Menlo, Consolas, monospace; - font-size: 0.85em; } - -code { - background: var(--secondary-back-color); - border-radius: var(--universal-border-radius); - padding: calc(var(--universal-padding) / 4) calc(var(--universal-padding) / 2); } - -kbd { - background: var(--fore-color); - color: var(--back-color); - border-radius: var(--universal-border-radius); - padding: calc(var(--universal-padding) / 4) calc(var(--universal-padding) / 2); } - -pre { - overflow: auto; - background: var(--secondary-back-color); - padding: calc(1.5 * var(--universal-padding)); - margin: var(--universal-margin); - border: 0.0714285714rem solid var(--secondary-border-color); - border-left: 0.2857142857rem solid var(--pre-color); - border-radius: 0 var(--universal-border-radius) var(--universal-border-radius) 0; } - -sup, sub, code, kbd { - line-height: 0; - position: relative; - vertical-align: baseline; } - -small, sup, sub, figcaption { - font-size: 0.75em; } - -sup { - top: -0.5em; } - -sub { - bottom: -0.25em; } - -figure { - margin: var(--universal-margin); } - -figcaption { - color: var(--secondary-fore-color); } - -a { - text-decoration: none; } - a:link { - color: var(--a-link-color); } - a:visited { - color: var(--a-visited-color); } - a:hover, a:focus { - text-decoration: underline; } - -/* - Definitions for the grid system, cards and containers. -*/ -.container { - margin: 0 auto; - padding: 0 calc(1.5 * var(--universal-padding)); } - -.row { - box-sizing: border-box; - display: flex; - flex: 0 1 auto; - flex-flow: row wrap; - margin: 0 0 0 var(--background-margin); } - -.col-sm, -[class^='col-sm-'], -[class^='col-sm-offset-'], -.row[class*='cols-sm-'] > * { - box-sizing: border-box; - flex: 0 0 auto; - padding: 0 calc(var(--universal-padding) / 2); } - -.col-sm, -.row.cols-sm > * { - max-width: 100%; - flex-grow: 1; - flex-basis: 0; } - -.col-sm-1, -.row.cols-sm-1 > * { - max-width: 8.3333333333%; - flex-basis: 8.3333333333%; } - -.col-sm-offset-0 { - margin-left: 0; } - -.col-sm-2, -.row.cols-sm-2 > * { - max-width: 16.6666666667%; - flex-basis: 16.6666666667%; } - -.col-sm-offset-1 { - margin-left: 8.3333333333%; } - -.col-sm-3, -.row.cols-sm-3 > * { - max-width: 25%; - flex-basis: 25%; } - -.col-sm-offset-2 { - margin-left: 16.6666666667%; } - -.col-sm-4, -.row.cols-sm-4 > * { - max-width: 33.3333333333%; - flex-basis: 33.3333333333%; } - -.col-sm-offset-3 { - margin-left: 25%; } - -.col-sm-5, -.row.cols-sm-5 > * { - max-width: 41.6666666667%; - flex-basis: 41.6666666667%; } - -.col-sm-offset-4 { - margin-left: 33.3333333333%; } - -.col-sm-6, -.row.cols-sm-6 > * { - max-width: 50%; - flex-basis: 50%; } - -.col-sm-offset-5 { - margin-left: 41.6666666667%; } - -.col-sm-7, -.row.cols-sm-7 > * { - max-width: 58.3333333333%; - flex-basis: 58.3333333333%; } - -.col-sm-offset-6 { - margin-left: 50%; } - -.col-sm-8, -.row.cols-sm-8 > * { - max-width: 66.6666666667%; - flex-basis: 66.6666666667%; } - -.col-sm-offset-7 { - margin-left: 58.3333333333%; } - -.col-sm-9, -.row.cols-sm-9 > * { - max-width: 75%; - flex-basis: 75%; } - -.col-sm-offset-8 { - margin-left: 66.6666666667%; } - -.col-sm-10, -.row.cols-sm-10 > * { - max-width: 83.3333333333%; - flex-basis: 83.3333333333%; } - -.col-sm-offset-9 { - margin-left: 75%; } - -.col-sm-11, -.row.cols-sm-11 > * { - max-width: 91.6666666667%; - flex-basis: 91.6666666667%; } - -.col-sm-offset-10 { - margin-left: 83.3333333333%; } - -.col-sm-12, -.row.cols-sm-12 > * { - max-width: 100%; - flex-basis: 100%; } - -.col-sm-offset-11 { - margin-left: 91.6666666667%; } - -.col-sm-normal { - order: initial; } - -.col-sm-first { - order: -999; } - -.col-sm-last { - order: 999; } - -@media screen and (min-width: 500px) { - .col-md, - [class^='col-md-'], - [class^='col-md-offset-'], - .row[class*='cols-md-'] > * { - box-sizing: border-box; - flex: 0 0 auto; - padding: 0 calc(var(--universal-padding) / 2); } - - .col-md, - .row.cols-md > * { - max-width: 100%; - flex-grow: 1; - flex-basis: 0; } - - .col-md-1, - .row.cols-md-1 > * { - max-width: 8.3333333333%; - flex-basis: 8.3333333333%; } - - .col-md-offset-0 { - margin-left: 0; } - - .col-md-2, - .row.cols-md-2 > * { - max-width: 16.6666666667%; - flex-basis: 16.6666666667%; } - - .col-md-offset-1 { - margin-left: 8.3333333333%; } - - .col-md-3, - .row.cols-md-3 > * { - max-width: 25%; - flex-basis: 25%; } - - .col-md-offset-2 { - margin-left: 16.6666666667%; } - - .col-md-4, - .row.cols-md-4 > * { - max-width: 33.3333333333%; - flex-basis: 33.3333333333%; } - - .col-md-offset-3 { - margin-left: 25%; } - - .col-md-5, - .row.cols-md-5 > * { - max-width: 41.6666666667%; - flex-basis: 41.6666666667%; } - - .col-md-offset-4 { - margin-left: 33.3333333333%; } - - .col-md-6, - .row.cols-md-6 > * { - max-width: 50%; - flex-basis: 50%; } - - .col-md-offset-5 { - margin-left: 41.6666666667%; } - - .col-md-7, - .row.cols-md-7 > * { - max-width: 58.3333333333%; - flex-basis: 58.3333333333%; } - - .col-md-offset-6 { - margin-left: 50%; } - - .col-md-8, - .row.cols-md-8 > * { - max-width: 66.6666666667%; - flex-basis: 66.6666666667%; } - - .col-md-offset-7 { - margin-left: 58.3333333333%; } - - .col-md-9, - .row.cols-md-9 > * { - max-width: 75%; - flex-basis: 75%; } - - .col-md-offset-8 { - margin-left: 66.6666666667%; } - - .col-md-10, - .row.cols-md-10 > * { - max-width: 83.3333333333%; - flex-basis: 83.3333333333%; } - - .col-md-offset-9 { - margin-left: 75%; } - - .col-md-11, - .row.cols-md-11 > * { - max-width: 91.6666666667%; - flex-basis: 91.6666666667%; } - - .col-md-offset-10 { - margin-left: 83.3333333333%; } - - .col-md-12, - .row.cols-md-12 > * { - max-width: 100%; - flex-basis: 100%; } - - .col-md-offset-11 { - margin-left: 91.6666666667%; } - - .col-md-normal { - order: initial; } - - .col-md-first { - order: -999; } - - .col-md-last { - order: 999; } } -@media screen and (min-width: 1280px) { - .col-lg, - [class^='col-lg-'], - [class^='col-lg-offset-'], - .row[class*='cols-lg-'] > * { - box-sizing: border-box; - flex: 0 0 auto; - padding: 0 calc(var(--universal-padding) / 2); } - - .col-lg, - .row.cols-lg > * { - max-width: 100%; - flex-grow: 1; - flex-basis: 0; } - - .col-lg-1, - .row.cols-lg-1 > * { - max-width: 8.3333333333%; - flex-basis: 8.3333333333%; } - - .col-lg-offset-0 { - margin-left: 0; } - - .col-lg-2, - .row.cols-lg-2 > * { - max-width: 16.6666666667%; - flex-basis: 16.6666666667%; } - - .col-lg-offset-1 { - margin-left: 8.3333333333%; } - - .col-lg-3, - .row.cols-lg-3 > * { - max-width: 25%; - flex-basis: 25%; } - - .col-lg-offset-2 { - margin-left: 16.6666666667%; } - - .col-lg-4, - .row.cols-lg-4 > * { - max-width: 33.3333333333%; - flex-basis: 33.3333333333%; } - - .col-lg-offset-3 { - margin-left: 25%; } - - .col-lg-5, - .row.cols-lg-5 > * { - max-width: 41.6666666667%; - flex-basis: 41.6666666667%; } - - .col-lg-offset-4 { - margin-left: 33.3333333333%; } - - .col-lg-6, - .row.cols-lg-6 > * { - max-width: 50%; - flex-basis: 50%; } - - .col-lg-offset-5 { - margin-left: 41.6666666667%; } - - .col-lg-7, - .row.cols-lg-7 > * { - max-width: 58.3333333333%; - flex-basis: 58.3333333333%; } - - .col-lg-offset-6 { - margin-left: 50%; } - - .col-lg-8, - .row.cols-lg-8 > * { - max-width: 66.6666666667%; - flex-basis: 66.6666666667%; } - - .col-lg-offset-7 { - margin-left: 58.3333333333%; } - - .col-lg-9, - .row.cols-lg-9 > * { - max-width: 75%; - flex-basis: 75%; } - - .col-lg-offset-8 { - margin-left: 66.6666666667%; } - - .col-lg-10, - .row.cols-lg-10 > * { - max-width: 83.3333333333%; - flex-basis: 83.3333333333%; } - - .col-lg-offset-9 { - margin-left: 75%; } - - .col-lg-11, - .row.cols-lg-11 > * { - max-width: 91.6666666667%; - flex-basis: 91.6666666667%; } - - .col-lg-offset-10 { - margin-left: 83.3333333333%; } - - .col-lg-12, - .row.cols-lg-12 > * { - max-width: 100%; - flex-basis: 100%; } - - .col-lg-offset-11 { - margin-left: 91.6666666667%; } - - .col-lg-normal { - order: initial; } - - .col-lg-first { - order: -999; } - - .col-lg-last { - order: 999; } } -/* Card component CSS variable definitions */ -:root { - --card-back-color: #3cb4e6; - --card-fore-color: #03234b; - --card-border-color: #03234b; } - -.card { - display: flex; - flex-direction: column; - justify-content: space-between; - align-self: center; - position: relative; - width: 100%; - background: var(--card-back-color); - color: var(--card-fore-color); - border: 0.0714285714rem solid var(--card-border-color); - border-radius: var(--universal-border-radius); - margin: var(--universal-margin); - overflow: hidden; } - @media screen and (min-width: 320px) { - .card { - max-width: 320px; } } - .card > .sectione { - background: var(--card-back-color); - color: var(--card-fore-color); - box-sizing: border-box; - margin: 0; - border: 0; - border-radius: 0; - border-bottom: 0.0714285714rem solid var(--card-border-color); - padding: var(--universal-padding); - width: 100%; } - .card > .sectione.media { - height: 200px; - padding: 0; - -o-object-fit: cover; - object-fit: cover; } - .card > .sectione:last-child { - border-bottom: 0; } - -/* - Custom elements for card elements. -*/ -@media screen and (min-width: 240px) { - .card.small { - max-width: 240px; } } -@media screen and (min-width: 480px) { - .card.large { - max-width: 480px; } } -.card.fluid { - max-width: 100%; - width: auto; } - -.card.warning { - --card-back-color: #e5b8b7; - --card-fore-color: #3b234b; - --card-border-color: #8c0078; } - -.card.error { - --card-back-color: #464650; - --card-fore-color: #ffffff; - --card-border-color: #8c0078; } - -.card > .sectione.dark { - --card-back-color: #3b234b; - --card-fore-color: #ffffff; } - -.card > .sectione.double-padded { - padding: calc(1.5 * var(--universal-padding)); } - -/* - Definitions for forms and input elements. -*/ -/* Input_control module CSS variable definitions */ -:root { - --form-back-color: #ffe97f; - --form-fore-color: #03234b; - --form-border-color: #3cb4e6; - --input-back-color: #ffffff; - --input-fore-color: #03234b; - --input-border-color: #3cb4e6; - --input-focus-color: #0288d1; - --input-invalid-color: #d32f2f; - --button-back-color: #e2e2e2; - --button-hover-back-color: #dcdcdc; - --button-fore-color: #212121; - --button-border-color: transparent; - --button-hover-border-color: transparent; - --button-group-border-color: rgba(124, 124, 124, 0.54); } - -form { - background: var(--form-back-color); - color: var(--form-fore-color); - border: 0.0714285714rem solid var(--form-border-color); - border-radius: var(--universal-border-radius); - margin: var(--universal-margin); - padding: calc(2 * var(--universal-padding)) var(--universal-padding); } - -fieldset { - border: 0.0714285714rem solid var(--form-border-color); - border-radius: var(--universal-border-radius); - margin: calc(var(--universal-margin) / 4); - padding: var(--universal-padding); } - -legend { - box-sizing: border-box; - display: table; - max-width: 100%; - white-space: normal; - font-weight: 500; - padding: calc(var(--universal-padding) / 2); } - -label { - padding: calc(var(--universal-padding) / 2) var(--universal-padding); } - -.input-group { - display: inline-block; } - .input-group.fluid { - display: flex; - align-items: center; - justify-content: center; } - .input-group.fluid > input { - max-width: 100%; - flex-grow: 1; - flex-basis: 0px; } - @media screen and (max-width: 499px) { - .input-group.fluid { - align-items: stretch; - flex-direction: column; } } - .input-group.vertical { - display: flex; - align-items: stretch; - flex-direction: column; } - .input-group.vertical > input { - max-width: 100%; - flex-grow: 1; - flex-basis: 0px; } - -[type="number"]::-webkit-inner-spin-button, [type="number"]::-webkit-outer-spin-button { - height: auto; } - -[type="search"] { - -webkit-appearance: textfield; - outline-offset: -2px; } - -[type="search"]::-webkit-search-cancel-button, -[type="search"]::-webkit-search-decoration { - -webkit-appearance: none; } - -input:not([type]), [type="text"], [type="email"], [type="number"], [type="search"], -[type="password"], [type="url"], [type="tel"], [type="checkbox"], [type="radio"], textarea, select { - box-sizing: border-box; - background: var(--input-back-color); - color: var(--input-fore-color); - border: 0.0714285714rem solid var(--input-border-color); - border-radius: var(--universal-border-radius); - margin: calc(var(--universal-margin) / 2); - padding: var(--universal-padding) calc(1.5 * var(--universal-padding)); } - -input:not([type="button"]):not([type="submit"]):not([type="reset"]):hover, input:not([type="button"]):not([type="submit"]):not([type="reset"]):focus, textarea:hover, textarea:focus, select:hover, select:focus { - border-color: var(--input-focus-color); - box-shadow: none; } -input:not([type="button"]):not([type="submit"]):not([type="reset"]):invalid, input:not([type="button"]):not([type="submit"]):not([type="reset"]):focus:invalid, textarea:invalid, textarea:focus:invalid, select:invalid, select:focus:invalid { - border-color: var(--input-invalid-color); - box-shadow: none; } -input:not([type="button"]):not([type="submit"]):not([type="reset"])[readonly], textarea[readonly], select[readonly] { - background: var(--secondary-back-color); } - -select { - max-width: 100%; } - -option { - overflow: hidden; - text-overflow: ellipsis; } - -[type="checkbox"], [type="radio"] { - -webkit-appearance: none; - -moz-appearance: none; - appearance: none; - position: relative; - height: calc(1rem + var(--universal-padding) / 2); - width: calc(1rem + var(--universal-padding) / 2); - vertical-align: text-bottom; - padding: 0; - flex-basis: calc(1rem + var(--universal-padding) / 2) !important; - flex-grow: 0 !important; } - [type="checkbox"]:checked:before, [type="radio"]:checked:before { - position: absolute; } - -[type="checkbox"]:checked:before { - content: '\2713'; - font-family: sans-serif; - font-size: calc(1rem + var(--universal-padding) / 2); - top: calc(0rem - var(--universal-padding)); - left: calc(var(--universal-padding) / 4); } - -[type="radio"] { - border-radius: 100%; } - [type="radio"]:checked:before { - border-radius: 100%; - content: ''; - top: calc(0.0714285714rem + var(--universal-padding) / 2); - left: calc(0.0714285714rem + var(--universal-padding) / 2); - background: var(--input-fore-color); - width: 0.5rem; - height: 0.5rem; } - -:placeholder-shown { - color: var(--input-fore-color); } - -::-ms-placeholder { - color: var(--input-fore-color); - opacity: 0.54; } - -button::-moz-focus-inner, [type="button"]::-moz-focus-inner, [type="reset"]::-moz-focus-inner, [type="submit"]::-moz-focus-inner { - border-style: none; - padding: 0; } - -button, html [type="button"], [type="reset"], [type="submit"] { - -webkit-appearance: button; } - -button { - overflow: visible; - text-transform: none; } - -button, [type="button"], [type="submit"], [type="reset"], -a.button, label.button, .button, -a[role="button"], label[role="button"], [role="button"] { - display: inline-block; - background: var(--button-back-color); - color: var(--button-fore-color); - border: 0.0714285714rem solid var(--button-border-color); - border-radius: var(--universal-border-radius); - padding: var(--universal-padding) calc(1.5 * var(--universal-padding)); - margin: var(--universal-margin); - text-decoration: none; - cursor: pointer; - transition: background 0.3s; } - button:hover, button:focus, [type="button"]:hover, [type="button"]:focus, [type="submit"]:hover, [type="submit"]:focus, [type="reset"]:hover, [type="reset"]:focus, - a.button:hover, - a.button:focus, label.button:hover, label.button:focus, .button:hover, .button:focus, - a[role="button"]:hover, - a[role="button"]:focus, label[role="button"]:hover, label[role="button"]:focus, [role="button"]:hover, [role="button"]:focus { - background: var(--button-hover-back-color); - border-color: var(--button-hover-border-color); } - -input:disabled, input[disabled], textarea:disabled, textarea[disabled], select:disabled, select[disabled], button:disabled, button[disabled], .button:disabled, .button[disabled], [role="button"]:disabled, [role="button"][disabled] { - cursor: not-allowed; - opacity: 0.75; } - -.button-group { - display: flex; - border: 0.0714285714rem solid var(--button-group-border-color); - border-radius: var(--universal-border-radius); - margin: var(--universal-margin); } - .button-group > button, .button-group [type="button"], .button-group > [type="submit"], .button-group > [type="reset"], .button-group > .button, .button-group > [role="button"] { - margin: 0; - max-width: 100%; - flex: 1 1 auto; - text-align: center; - border: 0; - border-radius: 0; - box-shadow: none; } - .button-group > :not(:first-child) { - border-left: 0.0714285714rem solid var(--button-group-border-color); } - @media screen and (max-width: 499px) { - .button-group { - flex-direction: column; } - .button-group > :not(:first-child) { - border: 0; - border-top: 0.0714285714rem solid var(--button-group-border-color); } } - -/* - Custom elements for forms and input elements. -*/ -button.primary, [type="button"].primary, [type="submit"].primary, [type="reset"].primary, .button.primary, [role="button"].primary { - --button-back-color: #1976d2; - --button-fore-color: #f8f8f8; } - button.primary:hover, button.primary:focus, [type="button"].primary:hover, [type="button"].primary:focus, [type="submit"].primary:hover, [type="submit"].primary:focus, [type="reset"].primary:hover, [type="reset"].primary:focus, .button.primary:hover, .button.primary:focus, [role="button"].primary:hover, [role="button"].primary:focus { - --button-hover-back-color: #1565c0; } - -button.secondary, [type="button"].secondary, [type="submit"].secondary, [type="reset"].secondary, .button.secondary, [role="button"].secondary { - --button-back-color: #d32f2f; - --button-fore-color: #f8f8f8; } - button.secondary:hover, button.secondary:focus, [type="button"].secondary:hover, [type="button"].secondary:focus, [type="submit"].secondary:hover, [type="submit"].secondary:focus, [type="reset"].secondary:hover, [type="reset"].secondary:focus, .button.secondary:hover, .button.secondary:focus, [role="button"].secondary:hover, [role="button"].secondary:focus { - --button-hover-back-color: #c62828; } - -button.tertiary, [type="button"].tertiary, [type="submit"].tertiary, [type="reset"].tertiary, .button.tertiary, [role="button"].tertiary { - --button-back-color: #308732; - --button-fore-color: #f8f8f8; } - button.tertiary:hover, button.tertiary:focus, [type="button"].tertiary:hover, [type="button"].tertiary:focus, [type="submit"].tertiary:hover, [type="submit"].tertiary:focus, [type="reset"].tertiary:hover, [type="reset"].tertiary:focus, .button.tertiary:hover, .button.tertiary:focus, [role="button"].tertiary:hover, [role="button"].tertiary:focus { - --button-hover-back-color: #277529; } - -button.inverse, [type="button"].inverse, [type="submit"].inverse, [type="reset"].inverse, .button.inverse, [role="button"].inverse { - --button-back-color: #212121; - --button-fore-color: #f8f8f8; } - button.inverse:hover, button.inverse:focus, [type="button"].inverse:hover, [type="button"].inverse:focus, [type="submit"].inverse:hover, [type="submit"].inverse:focus, [type="reset"].inverse:hover, [type="reset"].inverse:focus, .button.inverse:hover, .button.inverse:focus, [role="button"].inverse:hover, [role="button"].inverse:focus { - --button-hover-back-color: #111; } - -button.small, [type="button"].small, [type="submit"].small, [type="reset"].small, .button.small, [role="button"].small { - padding: calc(0.5 * var(--universal-padding)) calc(0.75 * var(--universal-padding)); - margin: var(--universal-margin); } - -button.large, [type="button"].large, [type="submit"].large, [type="reset"].large, .button.large, [role="button"].large { - padding: calc(1.5 * var(--universal-padding)) calc(2 * var(--universal-padding)); - margin: var(--universal-margin); } - -/* - Definitions for navigation elements. -*/ -/* Navigation module CSS variable definitions */ -:root { - --header-back-color: #03234b; - --header-hover-back-color: #ffd200; - --header-fore-color: #ffffff; - --header-border-color: #3cb4e6; - --nav-back-color: #ffffff; - --nav-hover-back-color: #ffe97f; - --nav-fore-color: #e6007e; - --nav-border-color: #3cb4e6; - --nav-link-color: #3cb4e6; - --footer-fore-color: #ffffff; - --footer-back-color: #03234b; - --footer-border-color: #3cb4e6; - --footer-link-color: #3cb4e6; - --drawer-back-color: #ffffff; - --drawer-hover-back-color: #ffe97f; - --drawer-border-color: #3cb4e6; - --drawer-close-color: #e6007e; } - -header { - height: 2.75rem; - background: var(--header-back-color); - color: var(--header-fore-color); - border-bottom: 0.0714285714rem solid var(--header-border-color); - padding: calc(var(--universal-padding) / 4) 0; - white-space: nowrap; - overflow-x: auto; - overflow-y: hidden; } - header.row { - box-sizing: content-box; } - header .logo { - color: var(--header-fore-color); - font-size: 1.75rem; - padding: var(--universal-padding) calc(2 * var(--universal-padding)); - text-decoration: none; } - header button, header [type="button"], header .button, header [role="button"] { - box-sizing: border-box; - position: relative; - top: calc(0rem - var(--universal-padding) / 4); - height: calc(3.1875rem + var(--universal-padding) / 2); - background: var(--header-back-color); - line-height: calc(3.1875rem - var(--universal-padding) * 1.5); - text-align: center; - color: var(--header-fore-color); - border: 0; - border-radius: 0; - margin: 0; - text-transform: uppercase; } - header button:hover, header button:focus, header [type="button"]:hover, header [type="button"]:focus, header .button:hover, header .button:focus, header [role="button"]:hover, header [role="button"]:focus { - background: var(--header-hover-back-color); } - -nav { - background: var(--nav-back-color); - color: var(--nav-fore-color); - border: 0.0714285714rem solid var(--nav-border-color); - border-radius: var(--universal-border-radius); - margin: var(--universal-margin); } - nav * { - padding: var(--universal-padding) calc(1.5 * var(--universal-padding)); } - nav a, nav a:visited { - display: block; - color: var(--nav-link-color); - border-radius: var(--universal-border-radius); - transition: background 0.3s; } - nav a:hover, nav a:focus, nav a:visited:hover, nav a:visited:focus { - text-decoration: none; - background: var(--nav-hover-back-color); } - nav .sublink-1 { - position: relative; - margin-left: calc(2 * var(--universal-padding)); } - nav .sublink-1:before { - position: absolute; - left: calc(var(--universal-padding) - 1 * var(--universal-padding)); - top: -0.0714285714rem; - content: ''; - height: 100%; - border: 0.0714285714rem solid var(--nav-border-color); - border-left: 0; } - nav .sublink-2 { - position: relative; - margin-left: calc(4 * var(--universal-padding)); } - nav .sublink-2:before { - position: absolute; - left: calc(var(--universal-padding) - 3 * var(--universal-padding)); - top: -0.0714285714rem; - content: ''; - height: 100%; - border: 0.0714285714rem solid var(--nav-border-color); - border-left: 0; } - -footer { - background: var(--footer-back-color); - color: var(--footer-fore-color); - border-top: 0.0714285714rem solid var(--footer-border-color); - padding: calc(2 * var(--universal-padding)) var(--universal-padding); - font-size: 0.875rem; } - footer a, footer a:visited { - color: var(--footer-link-color); } - -header.sticky { - position: -webkit-sticky; - position: sticky; - z-index: 1101; - top: 0; } - -footer.sticky { - position: -webkit-sticky; - position: sticky; - z-index: 1101; - bottom: 0; } - -.drawer-toggle:before { - display: inline-block; - position: relative; - vertical-align: bottom; - content: '\00a0\2261\00a0'; - font-family: sans-serif; - font-size: 1.5em; } -@media screen and (min-width: 500px) { - .drawer-toggle:not(.persistent) { - display: none; } } - -[type="checkbox"].drawer { - height: 1px; - width: 1px; - margin: -1px; - overflow: hidden; - position: absolute; - clip: rect(0 0 0 0); - -webkit-clip-path: inset(100%); - clip-path: inset(100%); } - [type="checkbox"].drawer + * { - display: block; - box-sizing: border-box; - position: fixed; - top: 0; - width: 320px; - height: 100vh; - overflow-y: auto; - background: var(--drawer-back-color); - border: 0.0714285714rem solid var(--drawer-border-color); - border-radius: 0; - margin: 0; - z-index: 1110; - right: -320px; - transition: right 0.3s; } - [type="checkbox"].drawer + * .drawer-close { - position: absolute; - top: var(--universal-margin); - right: var(--universal-margin); - z-index: 1111; - width: 2rem; - height: 2rem; - border-radius: var(--universal-border-radius); - padding: var(--universal-padding); - margin: 0; - cursor: pointer; - transition: background 0.3s; } - [type="checkbox"].drawer + * .drawer-close:before { - display: block; - content: '\00D7'; - color: var(--drawer-close-color); - position: relative; - font-family: sans-serif; - font-size: 2rem; - line-height: 1; - text-align: center; } - [type="checkbox"].drawer + * .drawer-close:hover, [type="checkbox"].drawer + * .drawer-close:focus { - background: var(--drawer-hover-back-color); } - @media screen and (max-width: 320px) { - [type="checkbox"].drawer + * { - width: 100%; } } - [type="checkbox"].drawer:checked + * { - right: 0; } - @media screen and (min-width: 500px) { - [type="checkbox"].drawer:not(.persistent) + * { - position: static; - height: 100%; - z-index: 1100; } - [type="checkbox"].drawer:not(.persistent) + * .drawer-close { - display: none; } } - -/* - Definitions for the responsive table component. -*/ -/* Table module CSS variable definitions. */ -:root { - --table-border-color: #03234b; - --table-border-separator-color: #03234b; - --table-head-back-color: #03234b; - --table-head-fore-color: #ffffff; - --table-body-back-color: #ffffff; - --table-body-fore-color: #03234b; - --table-body-alt-back-color: #f4f4f4; } - -table { - border-collapse: separate; - border-spacing: 0; - margin: 0; - display: flex; - flex: 0 1 auto; - flex-flow: row wrap; - padding: var(--universal-padding); - padding-top: 0; } - table caption { - font-size: 1rem; - margin: calc(2 * var(--universal-margin)) 0; - max-width: 100%; - flex: 0 0 100%; } - table thead, table tbody { - display: flex; - flex-flow: row wrap; - border: 0.0714285714rem solid var(--table-border-color); } - table thead { - z-index: 999; - border-radius: var(--universal-border-radius) var(--universal-border-radius) 0 0; - border-bottom: 0.0714285714rem solid var(--table-border-separator-color); } - table tbody { - border-top: 0; - margin-top: calc(0 - var(--universal-margin)); - border-radius: 0 0 var(--universal-border-radius) var(--universal-border-radius); } - table tr { - display: flex; - padding: 0; } - table th, table td { - padding: calc(0.5 * var(--universal-padding)); - font-size: 0.9rem; } - table th { - text-align: left; - background: var(--table-head-back-color); - color: var(--table-head-fore-color); } - table td { - background: var(--table-body-back-color); - color: var(--table-body-fore-color); - border-top: 0.0714285714rem solid var(--table-border-color); } - -table:not(.horizontal) { - overflow: auto; - max-height: 100%; } - table:not(.horizontal) thead, table:not(.horizontal) tbody { - max-width: 100%; - flex: 0 0 100%; } - table:not(.horizontal) tr { - flex-flow: row wrap; - flex: 0 0 100%; } - table:not(.horizontal) th, table:not(.horizontal) td { - flex: 1 0 0%; - overflow: hidden; - text-overflow: ellipsis; } - table:not(.horizontal) thead { - position: sticky; - top: 0; } - table:not(.horizontal) tbody tr:first-child td { - border-top: 0; } - -table.horizontal { - border: 0; } - table.horizontal thead, table.horizontal tbody { - border: 0; - flex: .2 0 0; - flex-flow: row nowrap; } - table.horizontal tbody { - overflow: auto; - justify-content: space-between; - flex: .8 0 0; - margin-left: 0; - padding-bottom: calc(var(--universal-padding) / 4); } - table.horizontal tr { - flex-direction: column; - flex: 1 0 auto; } - table.horizontal th, table.horizontal td { - width: auto; - border: 0; - border-bottom: 0.0714285714rem solid var(--table-border-color); } - table.horizontal th:not(:first-child), table.horizontal td:not(:first-child) { - border-top: 0; } - table.horizontal th { - text-align: right; - border-left: 0.0714285714rem solid var(--table-border-color); - border-right: 0.0714285714rem solid var(--table-border-separator-color); } - table.horizontal thead tr:first-child { - padding-left: 0; } - table.horizontal th:first-child, table.horizontal td:first-child { - border-top: 0.0714285714rem solid var(--table-border-color); } - table.horizontal tbody tr:last-child td { - border-right: 0.0714285714rem solid var(--table-border-color); } - table.horizontal tbody tr:last-child td:first-child { - border-top-right-radius: 0.25rem; } - table.horizontal tbody tr:last-child td:last-child { - border-bottom-right-radius: 0.25rem; } - table.horizontal thead tr:first-child th:first-child { - border-top-left-radius: 0.25rem; } - table.horizontal thead tr:first-child th:last-child { - border-bottom-left-radius: 0.25rem; } - -@media screen and (max-width: 499px) { - table, table.horizontal { - border-collapse: collapse; - border: 0; - width: 100%; - display: table; } - table thead, table th, table.horizontal thead, table.horizontal th { - border: 0; - height: 1px; - width: 1px; - margin: -1px; - overflow: hidden; - padding: 0; - position: absolute; - clip: rect(0 0 0 0); - -webkit-clip-path: inset(100%); - clip-path: inset(100%); } - table tbody, table.horizontal tbody { - border: 0; - display: table-row-group; } - table tr, table.horizontal tr { - display: block; - border: 0.0714285714rem solid var(--table-border-color); - border-radius: var(--universal-border-radius); - background: #ffffff; - padding: var(--universal-padding); - margin: var(--universal-margin); - margin-bottom: calc(1 * var(--universal-margin)); } - table th, table td, table.horizontal th, table.horizontal td { - width: auto; } - table td, table.horizontal td { - display: block; - border: 0; - text-align: right; } - table td:before, table.horizontal td:before { - content: attr(data-label); - float: left; - font-weight: 600; } - table th:first-child, table td:first-child, table.horizontal th:first-child, table.horizontal td:first-child { - border-top: 0; } - table tbody tr:last-child td, table.horizontal tbody tr:last-child td { - border-right: 0; } } -table tr:nth-of-type(2n) > td { - background: var(--table-body-alt-back-color); } - -@media screen and (max-width: 500px) { - table tr:nth-of-type(2n) { - background: var(--table-body-alt-back-color); } } -:root { - --table-body-hover-back-color: #90caf9; } - -table.hoverable tr:hover, table.hoverable tr:hover > td, table.hoverable tr:focus, table.hoverable tr:focus > td { - background: var(--table-body-hover-back-color); } - -@media screen and (max-width: 500px) { - table.hoverable tr:hover, table.hoverable tr:hover > td, table.hoverable tr:focus, table.hoverable tr:focus > td { - background: var(--table-body-hover-back-color); } } -/* - Definitions for contextual background elements, toasts and tooltips. -*/ -/* Contextual module CSS variable definitions */ -:root { - --mark-back-color: #3cb4e6; - --mark-fore-color: #ffffff; } - -mark { - background: var(--mark-back-color); - color: var(--mark-fore-color); - font-size: 0.95em; - line-height: 1em; - border-radius: var(--universal-border-radius); - padding: calc(var(--universal-padding) / 4) var(--universal-padding); } - mark.inline-block { - display: inline-block; - font-size: 1em; - line-height: 1.4; - padding: calc(var(--universal-padding) / 2) var(--universal-padding); } - -:root { - --toast-back-color: #424242; - --toast-fore-color: #fafafa; } - -.toast { - position: fixed; - bottom: calc(var(--universal-margin) * 3); - left: 50%; - transform: translate(-50%, -50%); - z-index: 1111; - color: var(--toast-fore-color); - background: var(--toast-back-color); - border-radius: calc(var(--universal-border-radius) * 16); - padding: var(--universal-padding) calc(var(--universal-padding) * 3); } - -:root { - --tooltip-back-color: #212121; - --tooltip-fore-color: #fafafa; } - -.tooltip { - position: relative; - display: inline-block; } - .tooltip:before, .tooltip:after { - position: absolute; - opacity: 0; - clip: rect(0 0 0 0); - -webkit-clip-path: inset(100%); - clip-path: inset(100%); - transition: all 0.3s; - z-index: 1010; - left: 50%; } - .tooltip:not(.bottom):before, .tooltip:not(.bottom):after { - bottom: 75%; } - .tooltip.bottom:before, .tooltip.bottom:after { - top: 75%; } - .tooltip:hover:before, .tooltip:hover:after, .tooltip:focus:before, .tooltip:focus:after { - opacity: 1; - clip: auto; - -webkit-clip-path: inset(0%); - clip-path: inset(0%); } - .tooltip:before { - content: ''; - background: transparent; - border: var(--universal-margin) solid transparent; - left: calc(50% - var(--universal-margin)); } - .tooltip:not(.bottom):before { - border-top-color: #212121; } - .tooltip.bottom:before { - border-bottom-color: #212121; } - .tooltip:after { - content: attr(aria-label); - color: var(--tooltip-fore-color); - background: var(--tooltip-back-color); - border-radius: var(--universal-border-radius); - padding: var(--universal-padding); - white-space: nowrap; - transform: translateX(-50%); } - .tooltip:not(.bottom):after { - margin-bottom: calc(2 * var(--universal-margin)); } - .tooltip.bottom:after { - margin-top: calc(2 * var(--universal-margin)); } - -:root { - --modal-overlay-color: rgba(0, 0, 0, 0.45); - --modal-close-color: #e6007e; - --modal-close-hover-color: #ffe97f; } - -[type="checkbox"].modal { - height: 1px; - width: 1px; - margin: -1px; - overflow: hidden; - position: absolute; - clip: rect(0 0 0 0); - -webkit-clip-path: inset(100%); - clip-path: inset(100%); } - [type="checkbox"].modal + div { - position: fixed; - top: 0; - left: 0; - display: none; - width: 100vw; - height: 100vh; - background: var(--modal-overlay-color); } - [type="checkbox"].modal + div .card { - margin: 0 auto; - max-height: 50vh; - overflow: auto; } - [type="checkbox"].modal + div .card .modal-close { - position: absolute; - top: 0; - right: 0; - width: 1.75rem; - height: 1.75rem; - border-radius: var(--universal-border-radius); - padding: var(--universal-padding); - margin: 0; - cursor: pointer; - transition: background 0.3s; } - [type="checkbox"].modal + div .card .modal-close:before { - display: block; - content: '\00D7'; - color: var(--modal-close-color); - position: relative; - font-family: sans-serif; - font-size: 1.75rem; - line-height: 1; - text-align: center; } - [type="checkbox"].modal + div .card .modal-close:hover, [type="checkbox"].modal + div .card .modal-close:focus { - background: var(--modal-close-hover-color); } - [type="checkbox"].modal:checked + div { - display: flex; - flex: 0 1 auto; - z-index: 1200; } - [type="checkbox"].modal:checked + div .card .modal-close { - z-index: 1211; } - -:root { - --collapse-label-back-color: #03234b; - --collapse-label-fore-color: #ffffff; - --collapse-label-hover-back-color: #3cb4e6; - --collapse-selected-label-back-color: #3cb4e6; - --collapse-border-color: var(--collapse-label-back-color); - --collapse-selected-border-color: #ceecf8; - --collapse-content-back-color: #ffffff; - --collapse-selected-label-border-color: #3cb4e6; } - -.collapse { - width: calc(100% - 2 * var(--universal-margin)); - opacity: 1; - display: flex; - flex-direction: column; - margin: var(--universal-margin); - border-radius: var(--universal-border-radius); } - .collapse > [type="radio"], .collapse > [type="checkbox"] { - height: 1px; - width: 1px; - margin: -1px; - overflow: hidden; - position: absolute; - clip: rect(0 0 0 0); - -webkit-clip-path: inset(100%); - clip-path: inset(100%); } - .collapse > label { - flex-grow: 1; - display: inline-block; - height: 1.25rem; - cursor: pointer; - transition: background 0.2s; - color: var(--collapse-label-fore-color); - background: var(--collapse-label-back-color); - border: 0.0714285714rem solid var(--collapse-selected-border-color); - padding: calc(1.25 * var(--universal-padding)); } - .collapse > label:hover, .collapse > label:focus { - background: var(--collapse-label-hover-back-color); } - .collapse > label + div { - flex-basis: auto; - height: 1px; - width: 1px; - margin: -1px; - overflow: hidden; - position: absolute; - clip: rect(0 0 0 0); - -webkit-clip-path: inset(100%); - clip-path: inset(100%); - transition: max-height 0.3s; - max-height: 1px; } - .collapse > :checked + label { - background: var(--collapse-selected-label-back-color); - border-color: var(--collapse-selected-label-border-color); } - .collapse > :checked + label + div { - box-sizing: border-box; - position: relative; - width: 100%; - height: auto; - overflow: auto; - margin: 0; - background: var(--collapse-content-back-color); - border: 0.0714285714rem solid var(--collapse-selected-border-color); - border-top: 0; - padding: var(--universal-padding); - clip: auto; - -webkit-clip-path: inset(0%); - clip-path: inset(0%); - max-height: 100%; } - .collapse > label:not(:first-of-type) { - border-top: 0; } - .collapse > label:first-of-type { - border-radius: var(--universal-border-radius) var(--universal-border-radius) 0 0; } - .collapse > label:last-of-type:not(:first-of-type) { - border-radius: 0 0 var(--universal-border-radius) var(--universal-border-radius); } - .collapse > label:last-of-type:first-of-type { - border-radius: var(--universal-border-radius); } - .collapse > :checked:last-of-type:not(:first-of-type) + label { - border-radius: 0; } - .collapse > :checked:last-of-type + label + div { - border-radius: 0 0 var(--universal-border-radius) var(--universal-border-radius); } - -/* - Custom elements for contextual background elements, toasts and tooltips. -*/ -mark.tertiary { - --mark-back-color: #3cb4e6; } - -mark.tag { - padding: calc(var(--universal-padding)/2) var(--universal-padding); - border-radius: 1em; } - -/* - Definitions for progress elements and spinners. -*/ -/* Progress module CSS variable definitions */ -:root { - --progress-back-color: #3cb4e6; - --progress-fore-color: #555; } - -progress { - display: block; - vertical-align: baseline; - -webkit-appearance: none; - -moz-appearance: none; - appearance: none; - height: 0.75rem; - width: calc(100% - 2 * var(--universal-margin)); - margin: var(--universal-margin); - border: 0; - border-radius: calc(2 * var(--universal-border-radius)); - background: var(--progress-back-color); - color: var(--progress-fore-color); } - progress::-webkit-progress-value { - background: var(--progress-fore-color); - border-top-left-radius: calc(2 * var(--universal-border-radius)); - border-bottom-left-radius: calc(2 * var(--universal-border-radius)); } - progress::-webkit-progress-bar { - background: var(--progress-back-color); } - progress::-moz-progress-bar { - background: var(--progress-fore-color); - border-top-left-radius: calc(2 * var(--universal-border-radius)); - border-bottom-left-radius: calc(2 * var(--universal-border-radius)); } - progress[value="1000"]::-webkit-progress-value { - border-radius: calc(2 * var(--universal-border-radius)); } - progress[value="1000"]::-moz-progress-bar { - border-radius: calc(2 * var(--universal-border-radius)); } - progress.inline { - display: inline-block; - vertical-align: middle; - width: 60%; } - -:root { - --spinner-back-color: #ddd; - --spinner-fore-color: #555; } - -@keyframes spinner-donut-anim { - 0% { - transform: rotate(0deg); } - 100% { - transform: rotate(360deg); } } -.spinner { - display: inline-block; - margin: var(--universal-margin); - border: 0.25rem solid var(--spinner-back-color); - border-left: 0.25rem solid var(--spinner-fore-color); - border-radius: 50%; - width: 1.25rem; - height: 1.25rem; - animation: spinner-donut-anim 1.2s linear infinite; } - -/* - Custom elements for progress bars and spinners. -*/ -progress.primary { - --progress-fore-color: #1976d2; } - -progress.secondary { - --progress-fore-color: #d32f2f; } - -progress.tertiary { - --progress-fore-color: #308732; } - -.spinner.primary { - --spinner-fore-color: #1976d2; } - -.spinner.secondary { - --spinner-fore-color: #d32f2f; } - -.spinner.tertiary { - --spinner-fore-color: #308732; } - -/* - Definitions for icons - powered by Feather (https://feathericons.com/). -*/ -span[class^='icon-'] { - display: inline-block; - height: 1em; - width: 1em; - vertical-align: -0.125em; - background-size: contain; - margin: 0 calc(var(--universal-margin) / 4); } - span[class^='icon-'].secondary { - -webkit-filter: invert(25%); - filter: invert(25%); } - span[class^='icon-'].inverse { - -webkit-filter: invert(100%); - filter: invert(100%); } - -span.icon-alert { - background-image: url("data:image/svg+xml,%3Csvg xmlns='http://www.w3.org/2000/svg' width='24' height='24' viewBox='0 0 24 24' fill='none' stroke='%2303234b' stroke-width='2' stroke-linecap='round' stroke-linejoin='round'%3E%3Ccircle cx='12' cy='12' r='10'%3E%3C/circle%3E%3Cline x1='12' y1='8' x2='12' y2='12'%3E%3C/line%3E%3Cline x1='12' y1='16' x2='12' y2='16'%3E%3C/line%3E%3C/svg%3E"); } -span.icon-bookmark { - background-image: url("data:image/svg+xml,%3Csvg xmlns='http://www.w3.org/2000/svg' width='24' height='24' viewBox='0 0 24 24' fill='none' stroke='%2303234b' stroke-width='2' stroke-linecap='round' stroke-linejoin='round'%3E%3Cpath d='M19 21l-7-5-7 5V5a2 2 0 0 1 2-2h10a2 2 0 0 1 2 2z'%3E%3C/path%3E%3C/svg%3E"); } -span.icon-calendar { - background-image: url("data:image/svg+xml,%3Csvg xmlns='http://www.w3.org/2000/svg' width='24' height='24' viewBox='0 0 24 24' fill='none' stroke='%2303234b' stroke-width='2' stroke-linecap='round' stroke-linejoin='round'%3E%3Crect x='3' y='4' width='18' height='18' rx='2' ry='2'%3E%3C/rect%3E%3Cline x1='16' y1='2' x2='16' y2='6'%3E%3C/line%3E%3Cline x1='8' y1='2' x2='8' y2='6'%3E%3C/line%3E%3Cline x1='3' y1='10' x2='21' y2='10'%3E%3C/line%3E%3C/svg%3E"); } -span.icon-credit { - background-image: url("data:image/svg+xml,%3Csvg xmlns='http://www.w3.org/2000/svg' width='24' height='24' viewBox='0 0 24 24' fill='none' stroke='%2303234b' stroke-width='2' stroke-linecap='round' stroke-linejoin='round'%3E%3Crect x='1' y='4' width='22' height='16' rx='2' ry='2'%3E%3C/rect%3E%3Cline x1='1' y1='10' x2='23' y2='10'%3E%3C/line%3E%3C/svg%3E"); } -span.icon-edit { - background-image: url("data:image/svg+xml,%3Csvg xmlns='http://www.w3.org/2000/svg' width='24' height='24' viewBox='0 0 24 24' fill='none' stroke='%2303234b' stroke-width='2' stroke-linecap='round' stroke-linejoin='round'%3E%3Cpath d='M20 14.66V20a2 2 0 0 1-2 2H4a2 2 0 0 1-2-2V6a2 2 0 0 1 2-2h5.34'%3E%3C/path%3E%3Cpolygon points='18 2 22 6 12 16 8 16 8 12 18 2'%3E%3C/polygon%3E%3C/svg%3E"); } -span.icon-link { - background-image: url("data:image/svg+xml,%3Csvg xmlns='http://www.w3.org/2000/svg' width='24' height='24' viewBox='0 0 24 24' fill='none' stroke='%2303234b' stroke-width='2' stroke-linecap='round' stroke-linejoin='round'%3E%3Cpath d='M18 13v6a2 2 0 0 1-2 2H5a2 2 0 0 1-2-2V8a2 2 0 0 1 2-2h6'%3E%3C/path%3E%3Cpolyline points='15 3 21 3 21 9'%3E%3C/polyline%3E%3Cline x1='10' y1='14' x2='21' y2='3'%3E%3C/line%3E%3C/svg%3E"); } -span.icon-help { - background-image: url("data:image/svg+xml,%3Csvg xmlns='http://www.w3.org/2000/svg' width='24' height='24' viewBox='0 0 24 24' fill='none' stroke='%2303234b' stroke-width='2' stroke-linecap='round' stroke-linejoin='round'%3E%3Cpath d='M9.09 9a3 3 0 0 1 5.83 1c0 2-3 3-3 3'%3E%3C/path%3E%3Ccircle cx='12' cy='12' r='10'%3E%3C/circle%3E%3Cline x1='12' y1='17' x2='12' y2='17'%3E%3C/line%3E%3C/svg%3E"); } -span.icon-home { - background-image: url("data:image/svg+xml,%3Csvg xmlns='http://www.w3.org/2000/svg' width='24' height='24' viewBox='0 0 24 24' fill='none' stroke='%2303234b' stroke-width='2' stroke-linecap='round' stroke-linejoin='round'%3E%3Cpath d='M3 9l9-7 9 7v11a2 2 0 0 1-2 2H5a2 2 0 0 1-2-2z'%3E%3C/path%3E%3Cpolyline points='9 22 9 12 15 12 15 22'%3E%3C/polyline%3E%3C/svg%3E"); } -span.icon-info { - background-image: url("data:image/svg+xml,%3Csvg xmlns='http://www.w3.org/2000/svg' width='24' height='24' viewBox='0 0 24 24' fill='none' stroke='%2303234b' stroke-width='2' stroke-linecap='round' stroke-linejoin='round'%3E%3Ccircle cx='12' cy='12' r='10'%3E%3C/circle%3E%3Cline x1='12' y1='16' x2='12' y2='12'%3E%3C/line%3E%3Cline x1='12' y1='8' x2='12' y2='8'%3E%3C/line%3E%3C/svg%3E"); } -span.icon-lock { - background-image: url("data:image/svg+xml,%3Csvg xmlns='http://www.w3.org/2000/svg' width='24' height='24' viewBox='0 0 24 24' fill='none' stroke='%2303234b' stroke-width='2' stroke-linecap='round' stroke-linejoin='round'%3E%3Crect x='3' y='11' width='18' height='11' rx='2' ry='2'%3E%3C/rect%3E%3Cpath d='M7 11V7a5 5 0 0 1 10 0v4'%3E%3C/path%3E%3C/svg%3E"); } -span.icon-mail { - background-image: url("data:image/svg+xml,%3Csvg xmlns='http://www.w3.org/2000/svg' width='24' height='24' viewBox='0 0 24 24' fill='none' stroke='%2303234b' stroke-width='2' stroke-linecap='round' stroke-linejoin='round'%3E%3Cpath d='M4 4h16c1.1 0 2 .9 2 2v12c0 1.1-.9 2-2 2H4c-1.1 0-2-.9-2-2V6c0-1.1.9-2 2-2z'%3E%3C/path%3E%3Cpolyline points='22,6 12,13 2,6'%3E%3C/polyline%3E%3C/svg%3E"); } -span.icon-location { - background-image: url("data:image/svg+xml,%3Csvg xmlns='http://www.w3.org/2000/svg' width='24' height='24' viewBox='0 0 24 24' fill='none' stroke='%2303234b' stroke-width='2' stroke-linecap='round' stroke-linejoin='round'%3E%3Cpath d='M21 10c0 7-9 13-9 13s-9-6-9-13a9 9 0 0 1 18 0z'%3E%3C/path%3E%3Ccircle cx='12' cy='10' r='3'%3E%3C/circle%3E%3C/svg%3E"); } -span.icon-phone { - background-image: url("data:image/svg+xml,%3Csvg xmlns='http://www.w3.org/2000/svg' width='24' height='24' viewBox='0 0 24 24' fill='none' stroke='%2303234b' stroke-width='2' stroke-linecap='round' stroke-linejoin='round'%3E%3Cpath d='M22 16.92v3a2 2 0 0 1-2.18 2 19.79 19.79 0 0 1-8.63-3.07 19.5 19.5 0 0 1-6-6 19.79 19.79 0 0 1-3.07-8.67A2 2 0 0 1 4.11 2h3a2 2 0 0 1 2 1.72 12.84 12.84 0 0 0 .7 2.81 2 2 0 0 1-.45 2.11L8.09 9.91a16 16 0 0 0 6 6l1.27-1.27a2 2 0 0 1 2.11-.45 12.84 12.84 0 0 0 2.81.7A2 2 0 0 1 22 16.92z'%3E%3C/path%3E%3C/svg%3E"); } -span.icon-rss { - background-image: url("data:image/svg+xml,%3Csvg xmlns='http://www.w3.org/2000/svg' width='24' height='24' viewBox='0 0 24 24' fill='none' stroke='%2303234b' stroke-width='2' stroke-linecap='round' stroke-linejoin='round'%3E%3Cpath d='M4 11a9 9 0 0 1 9 9'%3E%3C/path%3E%3Cpath d='M4 4a16 16 0 0 1 16 16'%3E%3C/path%3E%3Ccircle cx='5' cy='19' r='1'%3E%3C/circle%3E%3C/svg%3E"); } -span.icon-search { - background-image: url("data:image/svg+xml,%3Csvg xmlns='http://www.w3.org/2000/svg' width='24' height='24' viewBox='0 0 24 24' fill='none' stroke='%2303234b' stroke-width='2' stroke-linecap='round' stroke-linejoin='round'%3E%3Ccircle cx='11' cy='11' r='8'%3E%3C/circle%3E%3Cline x1='21' y1='21' x2='16.65' y2='16.65'%3E%3C/line%3E%3C/svg%3E"); } -span.icon-settings { - background-image: url("data:image/svg+xml,%3Csvg xmlns='http://www.w3.org/2000/svg' width='24' height='24' viewBox='0 0 24 24' fill='none' stroke='%2303234b' stroke-width='2' stroke-linecap='round' stroke-linejoin='round'%3E%3Ccircle cx='12' cy='12' r='3'%3E%3C/circle%3E%3Cpath d='M19.4 15a1.65 1.65 0 0 0 .33 1.82l.06.06a2 2 0 0 1 0 2.83 2 2 0 0 1-2.83 0l-.06-.06a1.65 1.65 0 0 0-1.82-.33 1.65 1.65 0 0 0-1 1.51V21a2 2 0 0 1-2 2 2 2 0 0 1-2-2v-.09A1.65 1.65 0 0 0 9 19.4a1.65 1.65 0 0 0-1.82.33l-.06.06a2 2 0 0 1-2.83 0 2 2 0 0 1 0-2.83l.06-.06a1.65 1.65 0 0 0 .33-1.82 1.65 1.65 0 0 0-1.51-1H3a2 2 0 0 1-2-2 2 2 0 0 1 2-2h.09A1.65 1.65 0 0 0 4.6 9a1.65 1.65 0 0 0-.33-1.82l-.06-.06a2 2 0 0 1 0-2.83 2 2 0 0 1 2.83 0l.06.06a1.65 1.65 0 0 0 1.82.33H9a1.65 1.65 0 0 0 1-1.51V3a2 2 0 0 1 2-2 2 2 0 0 1 2 2v.09a1.65 1.65 0 0 0 1 1.51 1.65 1.65 0 0 0 1.82-.33l.06-.06a2 2 0 0 1 2.83 0 2 2 0 0 1 0 2.83l-.06.06a1.65 1.65 0 0 0-.33 1.82V9a1.65 1.65 0 0 0 1.51 1H21a2 2 0 0 1 2 2 2 2 0 0 1-2 2h-.09a1.65 1.65 0 0 0-1.51 1z'%3E%3C/path%3E%3C/svg%3E"); } -span.icon-share { - background-image: url("data:image/svg+xml,%3Csvg xmlns='http://www.w3.org/2000/svg' width='24' height='24' viewBox='0 0 24 24' fill='none' stroke='%2303234b' stroke-width='2' stroke-linecap='round' stroke-linejoin='round'%3E%3Ccircle cx='18' cy='5' r='3'%3E%3C/circle%3E%3Ccircle cx='6' cy='12' r='3'%3E%3C/circle%3E%3Ccircle cx='18' cy='19' r='3'%3E%3C/circle%3E%3Cline x1='8.59' y1='13.51' x2='15.42' y2='17.49'%3E%3C/line%3E%3Cline x1='15.41' y1='6.51' x2='8.59' y2='10.49'%3E%3C/line%3E%3C/svg%3E"); } -span.icon-cart { - background-image: url("data:image/svg+xml,%3Csvg xmlns='http://www.w3.org/2000/svg' width='24' height='24' viewBox='0 0 24 24' fill='none' stroke='%2303234b' stroke-width='2' stroke-linecap='round' stroke-linejoin='round'%3E%3Ccircle cx='9' cy='21' r='1'%3E%3C/circle%3E%3Ccircle cx='20' cy='21' r='1'%3E%3C/circle%3E%3Cpath d='M1 1h4l2.68 13.39a2 2 0 0 0 2 1.61h9.72a2 2 0 0 0 2-1.61L23 6H6'%3E%3C/path%3E%3C/svg%3E"); } -span.icon-upload { - background-image: url("data:image/svg+xml,%3Csvg xmlns='http://www.w3.org/2000/svg' width='24' height='24' viewBox='0 0 24 24' fill='none' stroke='%2303234b' stroke-width='2' stroke-linecap='round' stroke-linejoin='round'%3E%3Cpath d='M21 15v4a2 2 0 0 1-2 2H5a2 2 0 0 1-2-2v-4'%3E%3C/path%3E%3Cpolyline points='17 8 12 3 7 8'%3E%3C/polyline%3E%3Cline x1='12' y1='3' x2='12' y2='15'%3E%3C/line%3E%3C/svg%3E"); } -span.icon-user { - background-image: url("data:image/svg+xml,%3Csvg xmlns='http://www.w3.org/2000/svg' width='24' height='24' viewBox='0 0 24 24' fill='none' stroke='%2303234b' stroke-width='2' stroke-linecap='round' stroke-linejoin='round'%3E%3Cpath d='M20 21v-2a4 4 0 0 0-4-4H8a4 4 0 0 0-4 4v2'%3E%3C/path%3E%3Ccircle cx='12' cy='7' r='4'%3E%3C/circle%3E%3C/svg%3E"); } - -/* - Definitions for utilities and helper classes. -*/ -/* Utility module CSS variable definitions */ -:root { - --generic-border-color: rgba(0, 0, 0, 0.3); - --generic-box-shadow: 0 0.2857142857rem 0.2857142857rem 0 rgba(0, 0, 0, 0.125), 0 0.1428571429rem 0.1428571429rem -0.1428571429rem rgba(0, 0, 0, 0.125); } - -.hidden { - display: none !important; } - -.visually-hidden { - position: absolute !important; - width: 1px !important; - height: 1px !important; - margin: -1px !important; - border: 0 !important; - padding: 0 !important; - clip: rect(0 0 0 0) !important; - -webkit-clip-path: inset(100%) !important; - clip-path: inset(100%) !important; - overflow: hidden !important; } - -.bordered { - border: 0.0714285714rem solid var(--generic-border-color) !important; } - -.rounded { - border-radius: var(--universal-border-radius) !important; } - -.circular { - border-radius: 50% !important; } - -.shadowed { - box-shadow: var(--generic-box-shadow) !important; } - -.responsive-margin { - margin: calc(var(--universal-margin) / 4) !important; } - @media screen and (min-width: 500px) { - .responsive-margin { - margin: calc(var(--universal-margin) / 2) !important; } } - @media screen and (min-width: 1280px) { - .responsive-margin { - margin: var(--universal-margin) !important; } } - -.responsive-padding { - padding: calc(var(--universal-padding) / 4) !important; } - @media screen and (min-width: 500px) { - .responsive-padding { - padding: calc(var(--universal-padding) / 2) !important; } } - @media screen and (min-width: 1280px) { - .responsive-padding { - padding: var(--universal-padding) !important; } } - -@media screen and (max-width: 499px) { - .hidden-sm { - display: none !important; } } -@media screen and (min-width: 500px) and (max-width: 1279px) { - .hidden-md { - display: none !important; } } -@media screen and (min-width: 1280px) { - .hidden-lg { - display: none !important; } } -@media screen and (max-width: 499px) { - .visually-hidden-sm { - position: absolute !important; - width: 1px !important; - height: 1px !important; - margin: -1px !important; - border: 0 !important; - padding: 0 !important; - clip: rect(0 0 0 0) !important; - -webkit-clip-path: inset(100%) !important; - clip-path: inset(100%) !important; - overflow: hidden !important; } } -@media screen and (min-width: 500px) and (max-width: 1279px) { - .visually-hidden-md { - position: absolute !important; - width: 1px !important; - height: 1px !important; - margin: -1px !important; - border: 0 !important; - padding: 0 !important; - clip: rect(0 0 0 0) !important; - -webkit-clip-path: inset(100%) !important; - clip-path: inset(100%) !important; - overflow: hidden !important; } } -@media screen and (min-width: 1280px) { - .visually-hidden-lg { - position: absolute !important; - width: 1px !important; - height: 1px !important; - margin: -1px !important; - border: 0 !important; - padding: 0 !important; - clip: rect(0 0 0 0) !important; - -webkit-clip-path: inset(100%) !important; - clip-path: inset(100%) !important; - overflow: hidden !important; } } - -/*# sourceMappingURL=mini-custom.css.map */ - -img[alt="ST logo"] { display: block; margin: auto; width: 75%; max-width: 250px; min-width: 71px; } -img[alt="Cube logo"] { float: right; width: 30%; max-width: 10rem; min-width: 8rem; padding-right: 1rem;} - -.figure { - display: block; - margin-left: auto; - margin-right: auto; - text-align: center; -} diff --git a/hw/bsp/stm32h7rs/boards/stm32h7s3nucleo/tcpp0203/_htmresc/st_logo_2020.png b/hw/bsp/stm32h7rs/boards/stm32h7s3nucleo/tcpp0203/_htmresc/st_logo_2020.png deleted file mode 100644 index d6cebb5ac..000000000 Binary files a/hw/bsp/stm32h7rs/boards/stm32h7s3nucleo/tcpp0203/_htmresc/st_logo_2020.png and /dev/null differ diff --git a/hw/bsp/stm32h7rs/boards/stm32h7s3nucleo/tcpp0203/tcpp0203.c b/hw/bsp/stm32h7rs/boards/stm32h7s3nucleo/tcpp0203/tcpp0203.c deleted file mode 100644 index 952ff16c9..000000000 --- a/hw/bsp/stm32h7rs/boards/stm32h7s3nucleo/tcpp0203/tcpp0203.c +++ /dev/null @@ -1,886 +0,0 @@ -/** - ****************************************************************************** - * @file tcpp0203.c - * @author MCD Application Team - * @brief This file provides the TCPP02/03 Type-C port protection driver. - ****************************************************************************** - * @attention - * - * Copyright (c) 2021 STMicroelectronics. - * All rights reserved. - * - * This software is licensed under terms that can be found in the LICENSE file - * in the root directory of this software component. - * If no LICENSE file comes with this software, it is provided AS-IS. - * - ****************************************************************************** - */ - -/* Includes ------------------------------------------------------------------*/ -#include "tcpp0203.h" - -#if defined(_TRACE) -#include "usbpd_core.h" -#include "usbpd_trace.h" -#include "string.h" -#include "stdio.h" -#endif /* _TRACE */ - -/** @addtogroup BSP - * @{ - */ - -/** @addtogroup Components - * @{ - */ - -/** @addtogroup TCPP0203 - * @brief This file provides a set of functions needed to drive the - * TCPP02/03 Type-C port protection. - * @{ - */ - -/** @defgroup TCPP0203_Private_Constants Private Constants - * @{ - */ - -/* Compilation option in order to enable/disable a concistency check performed - after each I2C access into TCPP0203 registers : goal is to check that written value in Reg0 - is properly reflected into reg1 register content. - To enable register consistency check, please uncomment below definition. - To disable it, comment below line */ -/* #define TCPP0203_REGISTER_CONSISTENCY_CHECK */ - -/** @defgroup TCPP0203_Private_Types Private Types - * @{ - */ -/* TCPP02/03 Type-C port protection driver structure initialization */ -TCPP0203_Drv_t TCPP0203_Driver = -{ - TCPP0203_Init, - TCPP0203_DeInit, - TCPP0203_Reset, - TCPP0203_SetVConnSwitch, - TCPP0203_SetGateDriverProvider, - TCPP0203_SetGateDriverConsumer, - TCPP0203_SetPowerMode, - TCPP0203_SetVBusDischarge, - TCPP0203_SetVConnDischarge, - TCPP0203_GetVConnSwitchAck, - TCPP0203_GetGateDriverProviderAck, - TCPP0203_GetGateDriverConsumerAck, - TCPP0203_GetPowerModeAck, - TCPP0203_GetVBusDischargeAck, - TCPP0203_GetVConnDischargeAck, - TCPP0203_GetOCPVConnFlag, - TCPP0203_GetOCPVBusFlag, - TCPP0203_GetOVPVBusFlag, - TCPP0203_GetOVPCCFlag, - TCPP0203_GetOTPFlag, - TCPP0203_GetVBusOkFlag, - TCPP0203_ReadTCPPType, - TCPP0203_ReadVCONNPower, - TCPP0203_WriteCtrlRegister, - TCPP0203_ReadAckRegister, - TCPP0203_ReadFlagRegister, -}; - -/** - * @} - */ - -/** @defgroup TCPP0203_Private_Variables Private Variables - * @{ - */ -static uint8_t TCPP0203_DeviceType = TCPP0203_DEVICE_TYPE_03; - -#if defined(TCPP0203_REGISTER_CONSISTENCY_CHECK) -static uint8_t Reg0_Expected_Value = 0x00; -static uint8_t Reg1_LastRead_Value = 0x00; -#endif /* TCPP0203_REGISTER_CONSISTENCY_CHECK */ - -/** - * @} - */ - -/* Private function prototypes -----------------------------------------------*/ - -/** @defgroup TCPP0203_Private_Function_Prototypes TCPP0203 Private Function Prototypes - * @{ - */ -static int32_t TCPP0203_ReadRegWrap(const void *handle, uint8_t Reg, uint8_t *Data, uint8_t Length); -static int32_t TCPP0203_WriteRegWrap(const void *handle, uint8_t Reg, uint8_t *Data, uint8_t Length); - -static int32_t TCPP0203_ModifyReg0(TCPP0203_Object_t *pObj, uint8_t Value, uint8_t Mask); - -#if defined(TCPP0203_REGISTER_CONSISTENCY_CHECK) -static int32_t TCPP0203_CheckReg0Reg1(TCPP0203_Object_t *pObj, uint8_t Reg0ExpectedValue); -#endif /* TCPP0203_REGISTER_CONSISTENCY_CHECK */ - -/** - * @} - */ - -/** @defgroup TCPP0203_Exported_Functions TCPP0203 Exported Functions - * @{ - */ - -/** - * @brief Register Bus Io to component - * @param Component object pointer - * @retval Status of execution - */ -int32_t TCPP0203_RegisterBusIO(TCPP0203_Object_t *pObj, TCPP0203_IO_t *pIO) -{ - int32_t ret; - - if (pObj == NULL) - { - ret = TCPP0203_ERROR; - } - else - { - pObj->IO.Init = pIO->Init; - pObj->IO.DeInit = pIO->DeInit; - pObj->IO.Address = pIO->Address; - pObj->IO.WriteReg = pIO->WriteReg; - pObj->IO.ReadReg = pIO->ReadReg; - pObj->IO.GetTick = pIO->GetTick; - - pObj->Ctx.ReadReg = TCPP0203_ReadRegWrap; - pObj->Ctx.WriteReg = TCPP0203_WriteRegWrap; - pObj->Ctx.handle = pObj; - - if (pObj->IO.Init != NULL) - { - ret = pObj->IO.Init(); - } - else - { - ret = TCPP0203_ERROR; - } - } - - return ret; -} - -/** - * @brief Initializes the TCPP0203 interface - * @param pObj Pointer to component object - * @retval Component status (TCPP0203_OK / TCPP0203_ERROR) - */ -int32_t TCPP0203_Init(TCPP0203_Object_t *pObj) -{ - int32_t ret = 0; - uint8_t tmp; - - if (pObj->IsInitialized == 0U) - { - /* Read TCPP Device type */ - ret += tcpp0203_read_reg(&pObj->Ctx, TCPP0203_READ_REG2, &tmp, 1); - - if (ret == TCPP0203_OK) - { - TCPP0203_DeviceType = (tmp & TCPP0203_DEVICE_TYPE_MSK); - } - else - { - TCPP0203_DeviceType = TCPP0203_DEVICE_TYPE_02; - } - pObj->IsInitialized = 1U; - } - - if (ret != TCPP0203_OK) - { - ret = TCPP0203_ERROR; - } - - return ret; -} - -/** - * @brief Deinitializes the TCPP0203 interface - * @param pObj Pointer to component object - * @retval Component status (TCPP0203_OK / TCPP0203_ERROR) - */ -int32_t TCPP0203_DeInit(TCPP0203_Object_t *pObj) -{ - if (pObj->IsInitialized == 1U) - { - /* De-Initialize IO BUS layer */ - pObj->IO.DeInit(); - - pObj->IsInitialized = 0U; - } - - return TCPP0203_OK; -} - -/** - * @brief Resets TCPP0203 register (Reg0) - * @param pObj Pointer to component object - * @retval Component status (TCPP0203_OK / TCPP0203_ERROR) - */ -int32_t TCPP0203_Reset(TCPP0203_Object_t *pObj) -{ - int32_t ret = TCPP0203_OK; - uint8_t tmp = TCPP0203_REG0_RST_VALUE; - - /* Write reset values in Reg0 register */ - if (tcpp0203_write_reg(&pObj->Ctx, TCPP0203_PROG_CTRL, &tmp, 1) != TCPP0203_OK) - { - ret = TCPP0203_ERROR; - } - -#if defined(TCPP0203_REGISTER_CONSISTENCY_CHECK) - Reg0_Expected_Value = TCPP0203_REG0_RST_VALUE; - Reg1_LastRead_Value = TCPP0203_REG0_RST_VALUE; -#endif /* TCPP0203_REGISTER_CONSISTENCY_CHECK */ - - return ret; -} - -/** - * @brief Configure TCPP0203 VConn Switch - * @param pObj Pointer to component object - * @param VConnSwitch VConn Switch requested setting - * This parameter can be one of the following values: - * @arg TCPP0203_VCONN_SWITCH_OPEN VConn switch open - * @arg TCPP0203_VCONN_SWITCH_CC1 VConn closed on CC1 - * @arg TCPP0203_VCONN_SWITCH_CC2 VConn closed on CC2 - * @retval Component status - */ -int32_t TCPP0203_SetVConnSwitch(TCPP0203_Object_t *pObj, uint8_t VConnSwitch) -{ - int32_t ret = TCPP0203_OK; - - if ((VConnSwitch != TCPP0203_VCONN_SWITCH_OPEN) - && (VConnSwitch != TCPP0203_VCONN_SWITCH_CC1) - && (VConnSwitch != TCPP0203_VCONN_SWITCH_CC2)) - { - ret = TCPP0203_ERROR; - } - else - { - /* Update VConn switch setting in Writing register Reg0 */ - ret += TCPP0203_ModifyReg0(pObj, VConnSwitch, TCPP0203_VCONN_SWITCH_MSK); - } - - return ret; -} - -/** - * @brief Configure TCPP0203 Gate Driver for Provider path - * @param pObj Pointer to component object - * @param GateDriverProvider GDP switch load requested setting - * This parameter can be one of the following values: - * @arg TCPP0203_GD_PROVIDER_SWITCH_OPEN GDP Switch Load Open - * @arg TCPP0203_GD_PROVIDER_SWITCH_CLOSED GDP Switch Load closed - * @retval Component status - */ -int32_t TCPP0203_SetGateDriverProvider(TCPP0203_Object_t *pObj, uint8_t GateDriverProvider) -{ - int32_t ret = TCPP0203_OK; - - if ((GateDriverProvider != TCPP0203_GD_PROVIDER_SWITCH_OPEN) - && (GateDriverProvider != TCPP0203_GD_PROVIDER_SWITCH_CLOSED)) - { - ret = TCPP0203_ERROR; - } - else - { - /* Update GDP Switch Load setting in Writing register Reg0 */ - if (GateDriverProvider == TCPP0203_GD_PROVIDER_SWITCH_CLOSED) - { - /* If Gate Driver Provider is to be closed, Gate Driver Consumer should be open */ - ret += TCPP0203_ModifyReg0(pObj, (GateDriverProvider | TCPP0203_GD_CONSUMER_SWITCH_OPEN), - (TCPP0203_GD_PROVIDER_SWITCH_MSK | TCPP0203_GD_CONSUMER_SWITCH_MSK)); - } - else - { - ret += TCPP0203_ModifyReg0(pObj, GateDriverProvider, TCPP0203_GD_PROVIDER_SWITCH_MSK); - } - } - - return ret; -} - -/** - * @brief Configure TCPP0203 Gate Driver for Consumer path - * @param pObj Pointer to component object - * @param GateDriverConsumer GDC switch load requested setting - * This parameter can be one of the following values: - * @arg TCPP0203_GD_CONSUMER_SWITCH_OPEN GDC Switch Load Open - * @arg TCPP0203_GD_CONSUMER_SWITCH_CLOSED GDC Switch Load closed - * @retval Component status - */ -int32_t TCPP0203_SetGateDriverConsumer(TCPP0203_Object_t *pObj, uint8_t GateDriverConsumer) -{ - int32_t ret = TCPP0203_OK; - - /* Check if TCPP type is TCPP03. Otherwise, return error */ - if (TCPP0203_DeviceType != TCPP0203_DEVICE_TYPE_03) - { - return (TCPP0203_ERROR); - } - - if ((GateDriverConsumer != TCPP0203_GD_CONSUMER_SWITCH_OPEN) - && (GateDriverConsumer != TCPP0203_GD_CONSUMER_SWITCH_CLOSED)) - { - ret = TCPP0203_ERROR; - } - else - { - /* Update GDC Switch Load setting in Writing register Reg0 */ - if (GateDriverConsumer == TCPP0203_GD_CONSUMER_SWITCH_CLOSED) - { - /* If Gate Driver Consumer is to be closed, Gate Driver Provider should be open */ - ret += TCPP0203_ModifyReg0(pObj, (GateDriverConsumer | TCPP0203_GD_PROVIDER_SWITCH_OPEN), - (TCPP0203_GD_PROVIDER_SWITCH_MSK | TCPP0203_GD_CONSUMER_SWITCH_MSK)); - } - else - { - ret += TCPP0203_ModifyReg0(pObj, GateDriverConsumer, TCPP0203_GD_CONSUMER_SWITCH_MSK); - } - } - - return ret; -} - -/** - * @brief Configure TCPP0203 Power Mode - * @param pObj Pointer to component object - * @param PowerMode Power mode requested setting - * This parameter can be one of the following values: - * @arg TCPP0203_POWER_MODE_HIBERNATE Hibernate - * @arg TCPP0203_POWER_MODE_LOWPOWER Low Power - * @arg TCPP0203_POWER_MODE_NORMAL Normal - * @retval Component status - */ -int32_t TCPP0203_SetPowerMode(TCPP0203_Object_t *pObj, uint8_t PowerMode) -{ - int32_t ret = TCPP0203_OK; - - if ((PowerMode != TCPP0203_POWER_MODE_HIBERNATE) - && (PowerMode != TCPP0203_POWER_MODE_LOWPOWER) - && (PowerMode != TCPP0203_POWER_MODE_NORMAL)) - { - ret = TCPP0203_ERROR; - } - else - { - /* Update Power Mode setting in Writing register Reg0 */ - ret += TCPP0203_ModifyReg0(pObj, PowerMode, TCPP0203_POWER_MODE_MSK); - } - - return ret; -} - -/** - * @brief Configure TCPP0203 Gate Driver for Provider path - * @param pObj Pointer to component object - * @param VBusDischarge VBUS Discharge requested setting - * This parameter can be one of the following values: - * @arg TCPP0203_VBUS_DISCHARGE_OFF VBUS Discharge Off - * @arg TCPP0203_VBUS_DISCHARGE_ON VBUS Discharge On - * @retval Component status - */ -int32_t TCPP0203_SetVBusDischarge(TCPP0203_Object_t *pObj, uint8_t VBusDischarge) -{ - int32_t ret = TCPP0203_OK; - - if ((VBusDischarge != TCPP0203_VBUS_DISCHARGE_OFF) - && (VBusDischarge != TCPP0203_VBUS_DISCHARGE_ON)) - { - ret = TCPP0203_ERROR; - } - else - { - /* Update VBUS Discharge setting in Writing register Reg0 */ - ret += TCPP0203_ModifyReg0(pObj, VBusDischarge, TCPP0203_VBUS_DISCHARGE_MSK); - } - - return ret; -} - -/** - * @brief Configure TCPP0203 Gate Driver for Provider path - * @param pObj Pointer to component object - * @param VConnDischarge GDP switch load requested setting - * This parameter can be one of the following values: - * @arg TCPP0203_VCONN_DISCHARGE_OFF VConn Discharge Off - * @arg TCPP0203_VCONN_DISCHARGE_ON VConn Discharge On - * @retval Component status - */ -int32_t TCPP0203_SetVConnDischarge(TCPP0203_Object_t *pObj, uint8_t VConnDischarge) -{ - int32_t ret = TCPP0203_OK; - - if ((VConnDischarge != TCPP0203_VCONN_DISCHARGE_OFF) - && (VConnDischarge != TCPP0203_VCONN_DISCHARGE_ON)) - { - ret = TCPP0203_ERROR; - } - else - { - /* Update VConn Discharge setting in Writing register Reg0 */ - ret += TCPP0203_ModifyReg0(pObj, VConnDischarge, TCPP0203_VCONN_DISCHARGE_MSK); - } - - return ret; -} - -/** - * @brief Get VConn switch Ack value - * @param pObj Pointer to component object - * @param pVConnSwitchAck Pointer on VConn switch Ack value - * This output parameter can be one of the following values: - * @arg TCPP0203_VCONN_SWITCH_OPEN VConn switch open Ack - * @arg TCPP0203_VCONN_SWITCH_CC1 VConn closed on CC1 Ack - * @arg TCPP0203_VCONN_SWITCH_CC2 VConn closed on CC2 Ack - * @retval Component status - */ -int32_t TCPP0203_GetVConnSwitchAck(TCPP0203_Object_t *pObj, uint8_t *pVConnSwitchAck) -{ - int32_t ret; - uint8_t tmp; - - ret = tcpp0203_read_reg(&pObj->Ctx, TCPP0203_ACK_REG, &tmp, 1); - *pVConnSwitchAck = (tmp & TCPP0203_VCONN_SWITCH_ACK_MSK); - - return ret; -} - -/** - * @brief Get Gate Driver Provider Ack value - * @param pObj Pointer to component object - * @param pGateDriverProviderAck Pointer on Gate Driver Provider Ack value - * This output parameter can be one of the following values: - * @arg TCPP0203_GD_PROVIDER_SWITCH_ACK_OPEN Gate Driver Provider Open Ack - * @arg TCPP0203_GD_PROVIDER_SWITCH_ACK_CLOSED Gate Driver Provider Closed Ack - * @retval Component status - */ -int32_t TCPP0203_GetGateDriverProviderAck(TCPP0203_Object_t *pObj, uint8_t *pGateDriverProviderAck) -{ - int32_t ret; - uint8_t tmp; - - ret = tcpp0203_read_reg(&pObj->Ctx, TCPP0203_ACK_REG, &tmp, 1); - *pGateDriverProviderAck = (tmp & TCPP0203_GD_PROVIDER_SWITCH_ACK_MSK); - - return ret; -} - -/** - * @brief Get Gate Driver Consumer Ack value - * @param pObj Pointer to component object - * @param pGateDriverConsumerAck Pointer on Gate Driver Consumer Ack value - * This output parameter can be one of the following values: - * @arg TCPP0203_GD_CONSUMER_SWITCH_ACK_OPEN Gate Driver Consumer Open Ack - * @arg TCPP0203_GD_CONSUMER_SWITCH_ACK_CLOSED Gate Driver Consumer Closed Ack - * @retval Component status - */ -int32_t TCPP0203_GetGateDriverConsumerAck(TCPP0203_Object_t *pObj, uint8_t *pGateDriverConsumerAck) -{ - int32_t ret; - uint8_t tmp; - - /* Check if TCPP type is TCPP03. Otherwise, return error */ - if (TCPP0203_DeviceType != TCPP0203_DEVICE_TYPE_03) - { - return (TCPP0203_ERROR); - } - - ret = tcpp0203_read_reg(&pObj->Ctx, TCPP0203_ACK_REG, &tmp, 1); - *pGateDriverConsumerAck = (tmp & TCPP0203_GD_CONSUMER_SWITCH_ACK_MSK); - - return ret; -} - -/** - * @brief Get Power Mode Ack value - * @param pObj Pointer to component object - * @param pPowerModeAck Pointer on Power Mode Ack value - * This output parameter can be one of the following values: - * @arg TCPP0203_POWER_MODE_ACK_HIBERNATE Power Mode Hibernate Ack - * @arg TCPP0203_POWER_MODE_ACK_LOWPOWER Power Mode Low Power Ack - * @arg TCPP0203_POWER_MODE_ACK_NORMAL Power Mode Normal Ack - * @retval Component status - */ -int32_t TCPP0203_GetPowerModeAck(TCPP0203_Object_t *pObj, uint8_t *pPowerModeAck) -{ - int32_t ret; - uint8_t tmp; - - ret = tcpp0203_read_reg(&pObj->Ctx, TCPP0203_ACK_REG, &tmp, 1); - *pPowerModeAck = (tmp & TCPP0203_POWER_MODE_ACK_MSK); - - return ret; -} - -/** - * @brief Get VBUS Discharge Ack value - * @param pObj Pointer to component object - * @param pVBusDischargeAck Pointer on VBUS Discharge Ack value - * This output parameter can be one of the following values: - * @arg TCPP0203_VBUS_DISCHARGE_ACK_OFF VBUS Discharge Off Ack - * @arg TCPP0203_VBUS_DISCHARGE_ACK_ON VBUS Discharge On Ack - * @retval Component status - */ -int32_t TCPP0203_GetVBusDischargeAck(TCPP0203_Object_t *pObj, uint8_t *pVBusDischargeAck) -{ - int32_t ret; - uint8_t tmp; - - ret = tcpp0203_read_reg(&pObj->Ctx, TCPP0203_ACK_REG, &tmp, 1); - *pVBusDischargeAck = (tmp & TCPP0203_VBUS_DISCHARGE_ACK_MSK); - - return ret; -} - -/** - * @brief Get VConn Discharge Ack value - * @param pObj Pointer to component object - * @param pVConnDischargeAck Pointer on VConn Discharge Ack value - * This output parameter can be one of the following values: - * @arg TCPP0203_VCONN_DISCHARGE_ACK_OFF VConn Discharge Off Ack - * @arg TCPP0203_VCONN_DISCHARGE_ACK_ON VConn Discharge On Ack - * @retval Component status - */ -int32_t TCPP0203_GetVConnDischargeAck(TCPP0203_Object_t *pObj, uint8_t *pVConnDischargeAck) -{ - int32_t ret; - uint8_t tmp; - - ret = tcpp0203_read_reg(&pObj->Ctx, TCPP0203_ACK_REG, &tmp, 1); - *pVConnDischargeAck = (tmp & TCPP0203_VCONN_DISCHARGE_ACK_MSK); - - return ret; -} - -/** - * @brief Get OCP VConn Flag value - * @param pObj Pointer to component object - * @param pOCPVConnFlag Pointer on OCP VConn Flag value - * This output parameter can be one of the following values: - * @arg TCPP0203_FLAG_OCP_VCONN_RESET OCP VConn flag not set - * @arg TCPP0203_FLAG_OCP_VCONN_SET OCP VConn flag set - * @retval Component status - */ -int32_t TCPP0203_GetOCPVConnFlag(TCPP0203_Object_t *pObj, uint8_t *pOCPVConnFlag) -{ - int32_t ret; - uint8_t tmp; - - ret = tcpp0203_read_reg(&pObj->Ctx, TCPP0203_FLAG_REG, &tmp, 1); - *pOCPVConnFlag = (tmp & TCPP0203_FLAG_OCP_VCONN_MSK); - - return ret; -} - -/** - * @brief Get OCP VBUS Flag value - * @param pObj Pointer to component object - * @param pGetOCPVBusFlag Pointer on OCP VBUS Flag value - * This output parameter can be one of the following values: - * @arg TCPP0203_FLAG_OCP_VBUS_RESET OCP VBUS flag not set - * @arg TCPP0203_FLAG_OCP_VBUS_SET OCP VBUS flag set - * @retval Component status - */ -int32_t TCPP0203_GetOCPVBusFlag(TCPP0203_Object_t *pObj, uint8_t *pGetOCPVBusFlag) -{ - int32_t ret; - uint8_t tmp; - - ret = tcpp0203_read_reg(&pObj->Ctx, TCPP0203_FLAG_REG, &tmp, 1); - *pGetOCPVBusFlag = (tmp & TCPP0203_FLAG_OCP_VBUS_MSK); - - return ret; -} - -/** - * @brief Get OVP VBUS Flag value - * @param pObj Pointer to component object - * @param pOVPVBusFlag Pointer on OVP VBUS Flag value - * This output parameter can be one of the following values: - * @arg TCPP0203_FLAG_OVP_VBUS_RESET OVP VBUS flag not set - * @arg TCPP0203_FLAG_OVP_VBUS_SET OVP VBUS flag set - * @retval Component status - */ -int32_t TCPP0203_GetOVPVBusFlag(TCPP0203_Object_t *pObj, uint8_t *pOVPVBusFlag) -{ - int32_t ret; - uint8_t tmp; - - ret = tcpp0203_read_reg(&pObj->Ctx, TCPP0203_FLAG_REG, &tmp, 1); - *pOVPVBusFlag = (tmp & TCPP0203_FLAG_OVP_VBUS_MSK); - - return ret; -} - -/** - * @brief Get OVP CC Flag value - * @param pObj Pointer to component object - * @param pOVPCCFlag Pointer on OVP CC Flag value - * This output parameter can be one of the following values: - * @arg TCPP0203_FLAG_OVP_CC_RESET OVP CC flag not set - * @arg TCPP0203_FLAG_OVP_CC_SET OVP CC flag set - * @retval Component status - */ -int32_t TCPP0203_GetOVPCCFlag(TCPP0203_Object_t *pObj, uint8_t *pOVPCCFlag) -{ - int32_t ret; - uint8_t tmp; - - ret = tcpp0203_read_reg(&pObj->Ctx, TCPP0203_FLAG_REG, &tmp, 1); - *pOVPCCFlag = (tmp & TCPP0203_FLAG_OVP_CC_MSK); - - return ret; -} - -/** - * @brief Get Over Temperature Flag value - * @param pObj Pointer to component object - * @param pOTPFlag Pointer on Over Temperature Flag value - * This output parameter can be one of the following values: - * @arg TCPP0203_FLAG_OTP_RESET Over Temperature flag not set - * @arg TCPP0203_FLAG_OTP_SET Over Temperature flag set - * @retval Component status - */ -int32_t TCPP0203_GetOTPFlag(TCPP0203_Object_t *pObj, uint8_t *pOTPFlag) -{ - int32_t ret; - uint8_t tmp; - - ret = tcpp0203_read_reg(&pObj->Ctx, TCPP0203_FLAG_REG, &tmp, 1); - *pOTPFlag = (tmp & TCPP0203_FLAG_OTP_MSK); - - return ret; -} - -/** - * @brief Get VBUS OK Flag value - * @param pObj Pointer to component object - * @param pVBusOkFlag Pointer on VBUS OK Flag value - * This output parameter can be one of the following values: - * @arg TCPP0203_FLAG_VBUS_OK_RESET VBUS OK flag not set - * @arg TCPP0203_FLAG_VBUS_OK_SET VBUS OK flag set - * @retval Component status - */ -int32_t TCPP0203_GetVBusOkFlag(TCPP0203_Object_t *pObj, uint8_t *pVBusOkFlag) -{ - int32_t ret; - uint8_t tmp; - - ret = tcpp0203_read_reg(&pObj->Ctx, TCPP0203_FLAG_REG, &tmp, 1); - *pVBusOkFlag = (tmp & TCPP0203_FLAG_VBUS_OK_MSK); - - return ret; -} - -/** - * @brief Get TCPP0203 Device Type value - * @param pObj Pointer to component object - * @param pTCPPType Pointer on TCPP0203 Device Type value - * This output parameter can be one of the following values: - * @arg TCPP0203_DEVICE_TYPE_02 TCPP02 Type - * @arg TCPP0203_DEVICE_TYPE_03 TCPP03 Type - * @retval Component status - */ -int32_t TCPP0203_ReadTCPPType(TCPP0203_Object_t *pObj, uint8_t *pTCPPType) -{ - int32_t ret; - uint8_t tmp; - - ret = tcpp0203_read_reg(&pObj->Ctx, TCPP0203_FLAG_REG, &tmp, 1); - *pTCPPType = (tmp & TCPP0203_DEVICE_TYPE_MSK); - - return ret; -} - -/** - * @brief Get VConn Power value - * @param pObj Pointer to component object - * @param pVCONNPower Pointer on VConn Power value - * This output parameter can be one of the following values: - * @arg TCPP0203_FLAG_VCONN_PWR_1W OCP VConn flag not set - * @arg TCPP0203_FLAG_VCONN_PWR_0_1W OCP VConn flag set - * @retval Component status - */ -int32_t TCPP0203_ReadVCONNPower(TCPP0203_Object_t *pObj, uint8_t *pVCONNPower) -{ - int32_t ret; - uint8_t tmp; - - ret = tcpp0203_read_reg(&pObj->Ctx, TCPP0203_FLAG_REG, &tmp, 1); - *pVCONNPower = (tmp & TCPP0203_FLAG_VCONN_PWR_MSK); - - return ret; -} - -/** - * @brief Set complete Ctrl register value (Reg 0) - * @param pObj Pointer to component object - * @param pCtrlRegister Pointer on Ctrl register value - * @retval Component status - */ -int32_t TCPP0203_WriteCtrlRegister(TCPP0203_Object_t *pObj, uint8_t *pCtrlRegister) -{ - int32_t ret; - - /* Update value in writing register (reg0) */ - ret = tcpp0203_write_reg(&pObj->Ctx, TCPP0203_PROG_CTRL, pCtrlRegister, 1); - -#if defined(TCPP0203_REGISTER_CONSISTENCY_CHECK) - Reg0_Expected_Value = *pCtrlRegister; -#endif /* TCPP0203_REGISTER_CONSISTENCY_CHECK */ - - return ret; -} - -/** - * @brief Get complete Ack register value - * @param pObj Pointer to component object - * @param pAckRegister Pointer on Ack register value - * @retval Component status - */ -int32_t TCPP0203_ReadAckRegister(TCPP0203_Object_t *pObj, uint8_t *pAckRegister) -{ - int32_t ret; - - ret = tcpp0203_read_reg(&pObj->Ctx, TCPP0203_ACK_REG, pAckRegister, 1); - - return ret; -} - -/** - * @brief Get complete Flag register value - * @param pObj Pointer to component object - * @param pFlagRegister Pointer on Flag register value - * @retval Component status - */ -int32_t TCPP0203_ReadFlagRegister(TCPP0203_Object_t *pObj, uint8_t *pFlagRegister) -{ - int32_t ret; - - ret = tcpp0203_read_reg(&pObj->Ctx, TCPP0203_FLAG_REG, pFlagRegister, 1); - - return ret; -} - -/******************** Static functions ****************************************/ -/** - * @brief Wrap TCPP0203 read function to Bus IO function - * @param handle Component object handle - * @param Reg Target register address to read - * @param pData Buffer where Target register value should be stored - * @param Length buffer size to be read - * @retval error status - */ -static int32_t TCPP0203_ReadRegWrap(const void *handle, uint8_t Reg, uint8_t *pData, uint8_t Length) -{ - const TCPP0203_Object_t *pObj = (const TCPP0203_Object_t *)handle; - - return pObj->IO.ReadReg(pObj->IO.Address, Reg, pData, Length); -} - -/** - * @brief Wrap TCPP0203 write function to Bus IO function - * @param handle Component object handle - * @param Reg Target register address to write - * @param pData Target register value to be written - * @param Length Buffer size to be written - * @retval error status - */ -static int32_t TCPP0203_WriteRegWrap(const void *handle, uint8_t Reg, uint8_t *pData, uint8_t Length) -{ - const TCPP0203_Object_t *pObj = (const TCPP0203_Object_t *)handle; - -#if defined(TCPP0203_REGISTER_CONSISTENCY_CHECK) - Reg0_Expected_Value = *pData; -#endif /* TCPP0203_REGISTER_CONSISTENCY_CHECK */ - - return pObj->IO.WriteReg(pObj->IO.Address, Reg, pData, Length); -} - -/** - * @brief TCPP0203 register update function to Bus IO function - * @param handle Component object handle - * @param Reg Target register address to write - * @param pData Target register value to be written - * @param Length Buffer size to be written - * @retval error status - */ -static int32_t TCPP0203_ModifyReg0(TCPP0203_Object_t *pObj, uint8_t Value, uint8_t Mask) -{ - int32_t ret; - uint8_t tmp; - - /* Read current content of ACK register (reflects content of bits set to 1 in Writing register Reg0) */ - ret = tcpp0203_read_reg(&pObj->Ctx, TCPP0203_ACK_REG, &tmp, 1); - - /* Update only the area dedicated to Mask */ - tmp &= ~(Mask); - tmp |= (Value & Mask); - -#if defined(TCPP0203_REGISTER_CONSISTENCY_CHECK) - Reg0_Expected_Value = tmp; -#endif /* TCPP0203_REGISTER_CONSISTENCY_CHECK */ - - /* Update value in writing register (reg0) */ - ret += tcpp0203_write_reg(&pObj->Ctx, TCPP0203_PROG_CTRL, &tmp, 1); - -#if defined(TCPP0203_REGISTER_CONSISTENCY_CHECK) - ret += TCPP0203_CheckReg0Reg1(pObj, Reg0_Expected_Value); -#endif /* TCPP0203_REGISTER_CONSISTENCY_CHECK */ - - return ret; -} - -#if defined(TCPP0203_REGISTER_CONSISTENCY_CHECK) -/** - * @brief TCPP0203 register control function between Reg0 and Reg1 value - * @param handle Component object handle - * @param Reg0ExpectedValue Value expected in Reg0 (built after all calls to write functions) - * @retval error status - */ -static int32_t TCPP0203_CheckReg0Reg1(TCPP0203_Object_t *pObj, uint8_t Reg0ExpectedValue) -{ - int32_t ret; - - /* Read current content of ACK register (expected to reflect content of bits set to 1 in Writing register Reg0) */ - ret = tcpp0203_read_reg(&pObj->Ctx, TCPP0203_ACK_REG, &Reg1_LastRead_Value, 1); - -#ifdef _TRACE - char str[12]; - sprintf(str, "Exp0_0x%02x", Reg0ExpectedValue); - USBPD_TRACE_Add(USBPD_TRACE_DEBUG, 0U, 0U, (uint8_t *)str, sizeof(str) - 1U); - sprintf(str, "Reg1_0x%02x", Reg1_LastRead_Value); - USBPD_TRACE_Add(USBPD_TRACE_DEBUG, 0U, 0U, (uint8_t *)str, sizeof(str) - 1U); -#endif /* _TRACE */ - - /* Control if Reg1 value is same as Reg0 expected one */ - if (Reg1_LastRead_Value != Reg0ExpectedValue) - { - while (1); - } - - return ret; -} -#endif /* TCPP0203_REGISTER_CONSISTENCY_CHECK */ - -/** - * @} - */ - -/** - * @} - */ - -/** - * @} - */ - -/** - * @} - */ diff --git a/hw/bsp/stm32h7rs/boards/stm32h7s3nucleo/tcpp0203/tcpp0203.h b/hw/bsp/stm32h7rs/boards/stm32h7s3nucleo/tcpp0203/tcpp0203.h deleted file mode 100644 index 271b534fc..000000000 --- a/hw/bsp/stm32h7rs/boards/stm32h7s3nucleo/tcpp0203/tcpp0203.h +++ /dev/null @@ -1,353 +0,0 @@ -/** - ****************************************************************************** - * @file tcpp0203.h - * @author MCD Application Team - * @brief This file contains all the functions prototypes for the - * tcpp0203.c driver. - ****************************************************************************** - * @attention - * - * Copyright (c) 2021 STMicroelectronics. - * All rights reserved. - * - * This software is licensed under terms that can be found in the LICENSE file - * in the root directory of this software component. - * If no LICENSE file comes with this software, it is provided AS-IS. - * - ****************************************************************************** - */ - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef TCPP0203_H -#define TCPP0203_H - -/* Includes ------------------------------------------------------------------*/ -#include "tcpp0203_reg.h" -#include - -/** @addtogroup BSP - * @{ - */ - -/** @addtogroup Component - * @{ - */ - -/** @addtogroup TCPP0203 - * @{ - */ - -/* Exported types ------------------------------------------------------------*/ - -/** @defgroup TCPP0203_Exported_Types TCPP0203 Exported Types - * @{ - */ -typedef int32_t (*TCPP0203_Init_Func)(void); -typedef int32_t (*TCPP0203_DeInit_Func)(void); -typedef int32_t (*TCPP0203_GetTick_Func)(void); -typedef int32_t (*TCPP0203_WriteReg_Func)(uint16_t, uint16_t, uint8_t *, uint16_t); -typedef int32_t (*TCPP0203_ReadReg_Func)(uint16_t, uint16_t, uint8_t *, uint16_t); - -typedef struct -{ - TCPP0203_Init_Func Init; - TCPP0203_DeInit_Func DeInit; - uint16_t Address; - TCPP0203_WriteReg_Func WriteReg; - TCPP0203_ReadReg_Func ReadReg; - TCPP0203_GetTick_Func GetTick; -} TCPP0203_IO_t; - - -typedef struct -{ - TCPP0203_IO_t IO; - TCPP0203_ctx_t Ctx; - uint8_t IsInitialized; -} TCPP0203_Object_t; - -typedef struct -{ - int32_t (*Init)(TCPP0203_Object_t *); - int32_t (*DeInit)(TCPP0203_Object_t *); - int32_t (*Reset)(TCPP0203_Object_t *); - int32_t (*SetVConnSwitch)(TCPP0203_Object_t *, uint8_t); - int32_t (*SetGateDriverProvider)(TCPP0203_Object_t *, uint8_t); - int32_t (*SetGateDriverConsumer)(TCPP0203_Object_t *, uint8_t); - int32_t (*SetPowerMode)(TCPP0203_Object_t *, uint8_t); - int32_t (*SetVBusDischarge)(TCPP0203_Object_t *, uint8_t); - int32_t (*SetVConnDischarge)(TCPP0203_Object_t *, uint8_t); - int32_t (*GetVConnSwitchAck)(TCPP0203_Object_t *, uint8_t *); - int32_t (*GetGateDriverProviderAck)(TCPP0203_Object_t *, uint8_t *); - int32_t (*GetGateDriverConsumerAck)(TCPP0203_Object_t *, uint8_t *); - int32_t (*GetPowerModeAck)(TCPP0203_Object_t *, uint8_t *); - int32_t (*GetVBusDischargeAck)(TCPP0203_Object_t *, uint8_t *); - int32_t (*GetVConnDischargeAck)(TCPP0203_Object_t *, uint8_t *); - int32_t (*GetOCPVConnFlag)(TCPP0203_Object_t *, uint8_t *); - int32_t (*GetOCPVBusFlag)(TCPP0203_Object_t *, uint8_t *); - int32_t (*GetOVPVBusFlag)(TCPP0203_Object_t *, uint8_t *); - int32_t (*GetOVPCCFlag)(TCPP0203_Object_t *, uint8_t *); - int32_t (*GetOTPFlag)(TCPP0203_Object_t *, uint8_t *); - int32_t (*GetVBusOkFlag)(TCPP0203_Object_t *, uint8_t *); - int32_t (*ReadTCPPType)(TCPP0203_Object_t *, uint8_t *); - int32_t (*ReadVCONNPower)(TCPP0203_Object_t *, uint8_t *); - int32_t (*WriteCtrlRegister)(TCPP0203_Object_t *, uint8_t *); - int32_t (*ReadAckRegister)(TCPP0203_Object_t *, uint8_t *); - int32_t (*ReadFlagRegister)(TCPP0203_Object_t *, uint8_t *); -} TCPP0203_Drv_t; - -/** - * @} - */ - -/** @defgroup TCPP0203_Exported_Constants TCPP0203 Exported Constants - * @{ - */ -/** - * @brief TCPP0203 Driver Response codes - */ -#define TCPP0203_OK (0) -#define TCPP0203_ERROR (-1) - -/** - * @brief TCPP0203 possible I2C Addresses - */ -#define TCPP0203_I2C_ADDRESS_X68 (0x68U) -#define TCPP0203_I2C_ADDRESS_X6A (0x6AU) - -/** - * @brief TCPP0203 Reg0 Reset Value - */ -#define TCPP0203_REG0_RST_VALUE TCPP0203_GD_CONSUMER_SWITCH_CLOSED - -/** - * @brief TCPP0203 VCONN Switch - */ -#define TCPP0203_VCONN_SWITCH_POS (0U) -#define TCPP0203_VCONN_SWITCH_MSK (0x03U << TCPP0203_VCONN_SWITCH_POS) -#define TCPP0203_VCONN_SWITCH_OPEN (0x00U) -#define TCPP0203_VCONN_SWITCH_CC1 (0x01U << TCPP0203_VCONN_SWITCH_POS) -#define TCPP0203_VCONN_SWITCH_CC2 (0x02U << TCPP0203_VCONN_SWITCH_POS) - -/** - * @brief TCPP0203 Gate Driver Provider values - */ -#define TCPP0203_GD_PROVIDER_SWITCH_POS (2U) -#define TCPP0203_GD_PROVIDER_SWITCH_MSK (0x01U << TCPP0203_GD_PROVIDER_SWITCH_POS) -#define TCPP0203_GD_PROVIDER_SWITCH_OPEN (0x00U) -#define TCPP0203_GD_PROVIDER_SWITCH_CLOSED (TCPP0203_GD_PROVIDER_SWITCH_MSK) - -/** - * @brief TCPP0203 Gate Driver Consumer values - */ -#define TCPP0203_GD_CONSUMER_SWITCH_POS (3U) -#define TCPP0203_GD_CONSUMER_SWITCH_MSK (0x01U << TCPP0203_GD_CONSUMER_SWITCH_POS) -#define TCPP0203_GD_CONSUMER_SWITCH_CLOSED (0x00U) -#define TCPP0203_GD_CONSUMER_SWITCH_OPEN (TCPP0203_GD_CONSUMER_SWITCH_MSK) - -/** - * @brief TCPP0203 Power Mode values - */ -#define TCPP0203_POWER_MODE_POS (4U) -#define TCPP0203_POWER_MODE_MSK (0x03U << TCPP0203_POWER_MODE_POS) -#define TCPP0203_POWER_MODE_HIBERNATE (0x00U) -#define TCPP0203_POWER_MODE_LOWPOWER (0x02U << TCPP0203_POWER_MODE_POS) -#define TCPP0203_POWER_MODE_NORMAL (0x01U << TCPP0203_POWER_MODE_POS) - -/** - * @brief TCPP0203 VBUS Discharge management - */ -#define TCPP0203_VBUS_DISCHARGE_POS (6U) -#define TCPP0203_VBUS_DISCHARGE_MSK (0x01U << TCPP0203_VBUS_DISCHARGE_POS) -#define TCPP0203_VBUS_DISCHARGE_OFF (0x00U) -#define TCPP0203_VBUS_DISCHARGE_ON (TCPP0203_VBUS_DISCHARGE_MSK) - -/** - * @brief TCPP0203 VConn Discharge management - */ -#define TCPP0203_VCONN_DISCHARGE_POS (7U) -#define TCPP0203_VCONN_DISCHARGE_MSK (0x01U << TCPP0203_VCONN_DISCHARGE_POS) -#define TCPP0203_VCONN_DISCHARGE_OFF (0x00U) -#define TCPP0203_VCONN_DISCHARGE_ON (TCPP0203_VCONN_DISCHARGE_MSK) - -/** - * @brief TCPP0203 VCONN Switch Acknowledge - */ -#define TCPP0203_VCONN_SWITCH_ACK_POS (0U) -#define TCPP0203_VCONN_SWITCH_ACK_MSK (0x03U << TCPP0203_VCONN_SWITCH_ACK_POS) -#define TCPP0203_VCONN_SWITCH_ACK_OPEN (0x00U) -#define TCPP0203_VCONN_SWITCH_ACK_CC1 (0x02U << TCPP0203_VCONN_SWITCH_ACK_POS) -#define TCPP0203_VCONN_SWITCH_ACK_CC2 (0x01U << TCPP0203_VCONN_SWITCH_ACK_POS) - -/** - * @brief TCPP0203 Gate Driver Provider Acknowledge - */ -#define TCPP0203_GD_PROVIDER_SWITCH_ACK_POS (2U) -#define TCPP0203_GD_PROVIDER_SWITCH_ACK_MSK (0x01U << TCPP0203_GD_PROVIDER_SWITCH_ACK_POS) -#define TCPP0203_GD_PROVIDER_SWITCH_ACK_OPEN (0x00U) -#define TCPP0203_GD_PROVIDER_SWITCH_ACK_CLOSED (TCPP0203_GD_PROVIDER_SWITCH_ACK_MSK) - -/** - * @brief TCPP0203 Gate Driver Consumer Acknowledge - */ -#define TCPP0203_GD_CONSUMER_SWITCH_ACK_POS (3U) -#define TCPP0203_GD_CONSUMER_SWITCH_ACK_MSK (0x01U << TCPP0203_GD_CONSUMER_SWITCH_ACK_POS) -#define TCPP0203_GD_CONSUMER_SWITCH_ACK_CLOSED (0x00U) -#define TCPP0203_GD_CONSUMER_SWITCH_ACK_OPEN (TCPP0203_GD_CONSUMER_SWITCH_ACK_MSK) - -/** - * @brief TCPP0203 Power Mode Acknowledge - */ -#define TCPP0203_POWER_MODE_ACK_POS (4U) -#define TCPP0203_POWER_MODE_ACK_MSK (0x03U << TCPP0203_POWER_MODE_ACK_POS) -#define TCPP0203_POWER_MODE_ACK_HIBERNATE (0x00U) -#define TCPP0203_POWER_MODE_ACK_LOWPOWER (0x01U << TCPP0203_POWER_MODE_ACK_POS) -#define TCPP0203_POWER_MODE_ACK_NORMAL (0x02U << TCPP0203_POWER_MODE_ACK_POS) - -/** - * @brief TCPP0203 VBUS Discharge Acknowledge - */ -#define TCPP0203_VBUS_DISCHARGE_ACK_POS (6U) -#define TCPP0203_VBUS_DISCHARGE_ACK_MSK (0x01U << TCPP0203_VBUS_DISCHARGE_ACK_POS) -#define TCPP0203_VBUS_DISCHARGE_ACK_OFF (0x00U) -#define TCPP0203_VBUS_DISCHARGE_ACK_ON (TCPP0203_VBUS_DISCHARGE_ACK_MSK) - -/** - * @brief TCPP0203 VConn Discharge Acknowledge - */ -#define TCPP0203_VCONN_DISCHARGE_ACK_POS (7U) -#define TCPP0203_VCONN_DISCHARGE_ACK_MSK (0x01U << TCPP0203_VCONN_DISCHARGE_ACK_POS) -#define TCPP0203_VCONN_DISCHARGE_ACK_OFF (0x00U) -#define TCPP0203_VCONN_DISCHARGE_ACK_ON (TCPP0203_VCONN_DISCHARGE_ACK_MSK) - -/** - * @brief TCPP0203 OCP Vconn Flag management - */ -#define TCPP0203_FLAG_OCP_VCONN_POS (0U) -#define TCPP0203_FLAG_OCP_VCONN_MSK (0x01U << TCPP0203_FLAG_OCP_VCONN_POS) -#define TCPP0203_FLAG_OCP_VCONN_SET (TCPP0203_FLAG_OCP_VCONN_MSK) -#define TCPP0203_FLAG_OCP_VCONN_RESET (0x00U) - -/** - * @brief TCPP0203 OCP VBUS Flag management - */ -#define TCPP0203_FLAG_OCP_VBUS_POS (1U) -#define TCPP0203_FLAG_OCP_VBUS_MSK (0x01U << TCPP0203_FLAG_OCP_VBUS_POS) -#define TCPP0203_FLAG_OCP_VBUS_SET (TCPP0203_FLAG_OCP_VBUS_MSK) -#define TCPP0203_FLAG_OCP_VBUS_RESET (0x00U) - -/** - * @brief TCPP0203 OVP VBUS Flag management - */ -#define TCPP0203_FLAG_OVP_VBUS_POS (2U) -#define TCPP0203_FLAG_OVP_VBUS_MSK (0x01U << TCPP0203_FLAG_OVP_VBUS_POS) -#define TCPP0203_FLAG_OVP_VBUS_SET (TCPP0203_FLAG_OVP_VBUS_MSK) -#define TCPP0203_FLAG_OVP_VBUS_RESET (0x00U) - -/** - * @brief TCPP0203 OVP CC Flag management - */ -#define TCPP0203_FLAG_OVP_CC_POS (3U) -#define TCPP0203_FLAG_OVP_CC_MSK (0x01U << TCPP0203_FLAG_OVP_CC_POS) -#define TCPP0203_FLAG_OVP_CC_SET (TCPP0203_FLAG_OVP_CC_MSK) -#define TCPP0203_FLAG_OVP_CC_RESET (0x00U) - -/** - * @brief TCPP0203 OTP Flag management - */ -#define TCPP0203_FLAG_OTP_POS (4U) -#define TCPP0203_FLAG_OTP_MSK (0x01U << TCPP0203_FLAG_OTP_POS) -#define TCPP0203_FLAG_OTP_SET (TCPP0203_FLAG_OTP_MSK) -#define TCPP0203_FLAG_OTP_RESET (0x00U) - -/** - * @brief TCPP0203 VBUS OK Flag management - */ -#define TCPP0203_FLAG_VBUS_OK_POS (5U) -#define TCPP0203_FLAG_VBUS_OK_MSK (0x01U << TCPP0203_FLAG_VBUS_OK_POS) -#define TCPP0203_FLAG_VBUS_OK_SET (TCPP0203_FLAG_VBUS_OK_MSK) -#define TCPP0203_FLAG_VBUS_OK_RESET (0x00U) - -/** - * @brief TCPP0203 VConn Power - */ -#define TCPP0203_FLAG_VCONN_PWR_POS (6U) -#define TCPP0203_FLAG_VCONN_PWR_MSK (0x01U << TCPP0203_FLAG_VCONN_PWR_POS) -#define TCPP0203_FLAG_VCONN_PWR_1W (TCPP0203_FLAG_VCONN_PWR_MSK) -#define TCPP0203_FLAG_VCONN_PWR_0_1W (0x00U) - -/** - * @brief TCPP0203 Device Type - */ -#define TCPP0203_DEVICE_TYPE_POS (7U) -#define TCPP0203_DEVICE_TYPE_MSK (0x01U << TCPP0203_DEVICE_TYPE_POS) -#define TCPP0203_DEVICE_TYPE_02 (TCPP0203_DEVICE_TYPE_MSK) -#define TCPP0203_DEVICE_TYPE_03 (0x00U) - -/** - * @} - */ - -/** @defgroup TCPP0203_Exported_Macros TCPP0203 Exported Macros - * @{ - */ -/** - * @} - */ - -/** @defgroup TCPP0203_Exported_Functions TCPP0203 Exported Functions - * @{ - */ - -/*------------------------------------------------------------------------------ - TCPP02/03 Type-C port protection functions -------------------------------------------------------------------------------*/ -/* High Layer codec functions */ -int32_t TCPP0203_RegisterBusIO(TCPP0203_Object_t *pObj, TCPP0203_IO_t *pIO); -int32_t TCPP0203_Init(TCPP0203_Object_t *pObj); -int32_t TCPP0203_DeInit(TCPP0203_Object_t *pObj); -int32_t TCPP0203_Reset(TCPP0203_Object_t *pObj); -int32_t TCPP0203_SetVConnSwitch(TCPP0203_Object_t *pObj, uint8_t VConnSwitch); -int32_t TCPP0203_SetGateDriverProvider(TCPP0203_Object_t *pObj, uint8_t GateDriverProvider); -int32_t TCPP0203_SetGateDriverConsumer(TCPP0203_Object_t *pObj, uint8_t GateDriverConsumer); -int32_t TCPP0203_SetPowerMode(TCPP0203_Object_t *pObj, uint8_t PowerMode); -int32_t TCPP0203_SetVBusDischarge(TCPP0203_Object_t *pObj, uint8_t VBusDischarge); -int32_t TCPP0203_SetVConnDischarge(TCPP0203_Object_t *pObj, uint8_t VConnDischarge); -int32_t TCPP0203_GetVConnSwitchAck(TCPP0203_Object_t *pObj, uint8_t *pVConnSwitchAck); -int32_t TCPP0203_GetGateDriverProviderAck(TCPP0203_Object_t *pObj, uint8_t *pGateDriverProviderAck); -int32_t TCPP0203_GetGateDriverConsumerAck(TCPP0203_Object_t *pObj, uint8_t *pGateDriverConsumerAck); -int32_t TCPP0203_GetPowerModeAck(TCPP0203_Object_t *pObj, uint8_t *pPowerModeAck); -int32_t TCPP0203_GetVBusDischargeAck(TCPP0203_Object_t *pObj, uint8_t *pVBusDischargeAck); -int32_t TCPP0203_GetVConnDischargeAck(TCPP0203_Object_t *pObj, uint8_t *pVConnDischargeAck); -int32_t TCPP0203_GetOCPVConnFlag(TCPP0203_Object_t *pObj, uint8_t *pOCPVConnFlag); -int32_t TCPP0203_GetOCPVBusFlag(TCPP0203_Object_t *pObj, uint8_t *pGetOCPVBusFlag); -int32_t TCPP0203_GetOVPVBusFlag(TCPP0203_Object_t *pObj, uint8_t *pOVPVBusFlag); -int32_t TCPP0203_GetOVPCCFlag(TCPP0203_Object_t *pObj, uint8_t *pOVPCCFlag); -int32_t TCPP0203_GetOTPFlag(TCPP0203_Object_t *pObj, uint8_t *pOTPFlag); -int32_t TCPP0203_GetVBusOkFlag(TCPP0203_Object_t *pObj, uint8_t *pVBusOkFlag); -int32_t TCPP0203_ReadTCPPType(TCPP0203_Object_t *pObj, uint8_t *pTCPPType); -int32_t TCPP0203_ReadVCONNPower(TCPP0203_Object_t *pObj, uint8_t *pVCONNPower); -int32_t TCPP0203_WriteCtrlRegister(TCPP0203_Object_t *pObj, uint8_t *pCtrlRegister); -int32_t TCPP0203_ReadAckRegister(TCPP0203_Object_t *pObj, uint8_t *pAckRegister); -int32_t TCPP0203_ReadFlagRegister(TCPP0203_Object_t *pObj, uint8_t *pFlagRegister); - -/** - * @} - */ - -/* TCPP02/03 Type-C port protection driver structure */ -extern TCPP0203_Drv_t TCPP0203_Driver; - -/** - * @} - */ - -/** - * @} - */ - -/** - * @} - */ - -#endif /* TCPP0203_H */ diff --git a/hw/bsp/stm32h7rs/boards/stm32h7s3nucleo/tcpp0203/tcpp0203_reg.c b/hw/bsp/stm32h7rs/boards/stm32h7s3nucleo/tcpp0203/tcpp0203_reg.c deleted file mode 100644 index 8025fa85e..000000000 --- a/hw/bsp/stm32h7rs/boards/stm32h7s3nucleo/tcpp0203/tcpp0203_reg.c +++ /dev/null @@ -1,73 +0,0 @@ -/** - ****************************************************************************** - * @file tcpp0203_reg.c - * @author MCD Application Team - * @brief This file provides unitary register function to control the TCPP02-03 - * Type-C port protection driver. - ****************************************************************************** - * @attention - * - * Copyright (c) 2021 STMicroelectronics. - * All rights reserved. - * - * This software is licensed under terms that can be found in the LICENSE file - * in the root directory of this software component. - * If no LICENSE file comes with this software, it is provided AS-IS. - * - ****************************************************************************** - */ - -/* Includes ------------------------------------------------------------------*/ -#include "tcpp0203_reg.h" - -/** @addtogroup BSP - * @{ - */ - -/** @addtogroup Components - * @{ - */ - -/** @addtogroup TCPP0203 - * @brief This file provides a set of functions needed to drive the - * TCPP02/03 Type-C port protection codec. - * @{ - */ - -/************** Generic Function *******************/ -/******************************************************************************* - * Function Name : tcpp0203_read_reg - * Description : Generic Reading function. It must be fulfilled with either - * I2C or SPI reading functions - * Input : Register Address, length of buffer - * Output : data Read - *******************************************************************************/ -int32_t tcpp0203_read_reg(const TCPP0203_ctx_t *ctx, uint8_t reg, uint8_t *data, uint8_t length) -{ - return ctx->ReadReg(ctx->handle, reg, data, length); -} - -/******************************************************************************* - * Function Name : tcpp0203_write_reg - * Description : Generic Writing function. It must be fulfilled with either - * I2C or SPI writing function - * Input : Register Address, data to be written, length of buffer - * Output : None - *******************************************************************************/ -int32_t tcpp0203_write_reg(const TCPP0203_ctx_t *ctx, uint8_t reg, uint8_t *data, uint8_t length) -{ - return ctx->WriteReg(ctx->handle, reg, data, length); -} - -/******************************************************************************/ -/** - * @} - */ - -/** - * @} - */ - -/** - * @} - */ diff --git a/hw/bsp/stm32h7rs/boards/stm32h7s3nucleo/tcpp0203/tcpp0203_reg.h b/hw/bsp/stm32h7rs/boards/stm32h7s3nucleo/tcpp0203/tcpp0203_reg.h deleted file mode 100644 index 92420e1fe..000000000 --- a/hw/bsp/stm32h7rs/boards/stm32h7s3nucleo/tcpp0203/tcpp0203_reg.h +++ /dev/null @@ -1,98 +0,0 @@ -/** - ****************************************************************************** - * @file tcpp0203_reg.h - * @author MCD Application Team - * @brief Header of tcpp0203_reg.c - * - ****************************************************************************** - * @attention - * - * Copyright (c) 2021 STMicroelectronics. - * All rights reserved. - * - * This software is licensed under terms that can be found in the LICENSE file - * in the root directory of this software component. - * If no LICENSE file comes with this software, it is provided AS-IS. - * - ****************************************************************************** - */ - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef TCPP0203_REG_H -#define TCPP0203_REG_H - -#include - -#ifdef __cplusplus -extern "C" { -#endif - -/* Includes ------------------------------------------------------------------*/ -/** @addtogroup BSP - * @{ - */ - -/** @addtogroup Component - * @{ - */ - -/** @addtogroup TCPP0203 - * @{ - */ - - -/** @defgroup TCPP0203_Exported_Constants TCPP0203 Exported Constants - * @{ - */ -/******************************************************************************/ -/****************************** REGISTER MAPPING ******************************/ -/******************************************************************************/ -#define TCPP0203_WRITE_REG 0x00U -#define TCPP0203_PROG_CTRL TCPP0203_WRITE_REG -#define TCPP0203_READ_REG1 0x01U -#define TCPP0203_ACK_REG TCPP0203_READ_REG1 -#define TCPP0203_READ_REG2 0x02U -#define TCPP0203_FLAG_REG TCPP0203_READ_REG2 - -/** - * @} - */ - -/************** Generic Function *******************/ - -typedef int32_t (*TCPP0203_Write_Func)(const void *, uint8_t, uint8_t *, uint8_t); -typedef int32_t (*TCPP0203_Read_Func)(const void *, uint8_t, uint8_t *, uint8_t); - -typedef struct -{ - TCPP0203_Write_Func WriteReg; - TCPP0203_Read_Func ReadReg; - void *handle; -} TCPP0203_ctx_t; - -/******************************************************************************* - * Register : Generic - All - * Address : Generic - All - * Bit Group Name: None - * Permission : W - *******************************************************************************/ -int32_t tcpp0203_write_reg(const TCPP0203_ctx_t *ctx, uint8_t reg, uint8_t *data, uint8_t length); -int32_t tcpp0203_read_reg(const TCPP0203_ctx_t *ctx, uint8_t reg, uint8_t *data, uint8_t length); - -#ifdef __cplusplus -} -#endif - -#endif /* TCPP0203_REG_H */ - -/** - * @} - */ - -/** - * @} - */ - -/** - * @} - */ diff --git a/hw/bsp/stm32h7rs/family.cmake b/hw/bsp/stm32h7rs/family.cmake index 61c3ebaea..e5e98f914 100644 --- a/hw/bsp/stm32h7rs/family.cmake +++ b/hw/bsp/stm32h7rs/family.cmake @@ -5,6 +5,7 @@ set(ST_PREFIX stm32${ST_FAMILY}xx) set(ST_HAL_DRIVER ${TOP}/hw/mcu/st/stm32${ST_FAMILY}xx_hal_driver) set(ST_CMSIS ${TOP}/hw/mcu/st/cmsis_device_${ST_FAMILY}) +set(ST_TCPP0203 ${TOP}/hw/mcu/st/stm32-tcpp0203) set(CMSIS_5 ${TOP}/lib/CMSIS_5) # include board specific @@ -86,6 +87,8 @@ function(add_board_target BOARD_TARGET) BOARD_TUD_MAX_SPEED=${RHPORT_DEVICE_SPEED} BOARD_TUH_RHPORT=${RHPORT_HOST} BOARD_TUH_MAX_SPEED=${RHPORT_HOST_SPEED} + SEGGER_RTT_SECTION="noncacheable_buffer" + BUFFER_SIZE_UP=0x3000 ) update_board(${BOARD_TARGET}) diff --git a/hw/bsp/stm32h7rs/family.mk b/hw/bsp/stm32h7rs/family.mk index d679b72f1..9970059f8 100644 --- a/hw/bsp/stm32h7rs/family.mk +++ b/hw/bsp/stm32h7rs/family.mk @@ -2,6 +2,7 @@ ST_FAMILY = h7rs ST_PREFIX = stm32${ST_FAMILY}xx ST_CMSIS = hw/mcu/st/cmsis_device_$(ST_FAMILY) ST_HAL_DRIVER = hw/mcu/st/${ST_PREFIX}_hal_driver +ST_TCPP0203 = hw/mcu/st/stm32-tcpp0203 UF2_FAMILY_ID = 0x6db66083 @@ -42,6 +43,8 @@ CFLAGS += \ -DBOARD_TUD_MAX_SPEED=${RHPORT_DEVICE_SPEED} \ -DBOARD_TUH_RHPORT=${RHPORT_HOST} \ -DBOARD_TUH_MAX_SPEED=${RHPORT_HOST_SPEED} \ + -DSEGGER_RTT_SECTION=\"noncacheable_buffer\" \ + -DBUFFER_SIZE_UP=0x3000 \ # GCC Flags CFLAGS_GCC += \ diff --git a/hw/bsp/stm32n6/boards/stm32n657nucleo/board.cmake b/hw/bsp/stm32n6/boards/stm32n657nucleo/board.cmake index 789eb9a2e..e88efefb9 100644 --- a/hw/bsp/stm32n6/boards/stm32n657nucleo/board.cmake +++ b/hw/bsp/stm32n6/boards/stm32n657nucleo/board.cmake @@ -7,13 +7,11 @@ function(update_board TARGET) target_compile_definitions(${TARGET} PUBLIC STM32N657xx ) - target_sources(${TARGET} PUBLIC - # BSP - ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/tcpp0203/tcpp0203.c - ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/tcpp0203/tcpp0203_reg.c + ${ST_TCPP0203}/tcpp0203.c + ${ST_TCPP0203}/tcpp0203_reg.c ) target_include_directories(${TARGET} PUBLIC - ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/tcpp0203 + ${ST_TCPP0203} ) endfunction() diff --git a/hw/bsp/stm32n6/boards/stm32n657nucleo/board.mk b/hw/bsp/stm32n6/boards/stm32n657nucleo/board.mk index bfbe5b23c..05717699c 100644 --- a/hw/bsp/stm32n6/boards/stm32n657nucleo/board.mk +++ b/hw/bsp/stm32n6/boards/stm32n657nucleo/board.mk @@ -10,8 +10,8 @@ flash: flash-stlink PORT = 1 SRC_C += \ - $(BOARD_PATH)/tcpp0203/tcpp0203.c \ - $(BOARD_PATH)/tcpp0203/tcpp0203_reg.c \ + $(ST_TCPP0203)/tcpp0203.c \ + $(ST_TCPP0203)/tcpp0203_reg.c \ INC += \ - $(TOP)/$(BOARD_PATH)/tcpp0203 \ + $(TOP)/$(ST_TCPP0203) \ diff --git a/hw/bsp/stm32n6/boards/stm32n657nucleo/tcpp0203/LICENSE.txt b/hw/bsp/stm32n6/boards/stm32n657nucleo/tcpp0203/LICENSE.txt deleted file mode 100644 index 1cbbc544a..000000000 --- a/hw/bsp/stm32n6/boards/stm32n657nucleo/tcpp0203/LICENSE.txt +++ /dev/null @@ -1,6 +0,0 @@ -This software component is provided to you as part of a software package and -applicable license terms are in the Package_license file. If you received this -software component outside of a package or without applicable license terms, -the terms of the BSD-3-Clause license shall apply. -You may obtain a copy of the BSD-3-Clause at: -https://opensource.org/licenses/BSD-3-Clause diff --git a/hw/bsp/stm32n6/boards/stm32n657nucleo/tcpp0203/Release_Notes.html b/hw/bsp/stm32n6/boards/stm32n657nucleo/tcpp0203/Release_Notes.html deleted file mode 100644 index 6bbba86a4..000000000 --- a/hw/bsp/stm32n6/boards/stm32n657nucleo/tcpp0203/Release_Notes.html +++ /dev/null @@ -1,205 +0,0 @@ - - - - - - - Release Notes for TCPP0203 Component Driver - - - - - - -
-
-
-

Release Notes for TCPP0203 Component Driver

-

Copyright © 2020 STMicroelectronics
-

- -
-

Purpose

-

This driver provides a set of functions needed to drive TCPP0203 Type-C Port Protection component

-
-
-

Update History

-
- -
-

Main Changes

-

Maintenance release

-

Contents

- - - - - - - - - - - -
Headline
MISRA Rule-81.13 correction on TCPP0203 component driver files
-

Backward compatibility

-

No compatibility break with previous version

-

Dependencies

-
-
-
- -
-

Main Changes

-

Maintenance release

-

Contents

- - - - - - - - - - - - -
Fixed bugs list
Headline
MISRA corrections on TCPP0203 component driver files
-

Known Limitations

-

Outstanding bugs list : None

-

Requirements not met or planned in a forthcoming release : None

-

Development Toolchains and Compilers

-
    -
  • IAR Embedded Workbench for ARM (EWARM) toolchain V8.32.3
    • -
  • RealView Microcontroller Development Kit (MDK-ARM) toolchain V5.27.1
    • -
  • STM32CubeIDE toolchain V1.8.0
    • -
-

Backward compatibility

-

No compatibility break with previous version

-

Dependencies

-
-
-
- -
-

Main Changes

-

Maintenance release

-

Contents

- - - - - - - - - - - - -
Fixed bugs list
Headline
License updates
-

Known Limitations

-

Outstanding bugs list : None

-

Requirements not met or planned in a forthcoming release : None

-

Development Toolchains and Compilers

-
    -
  • IAR Embedded Workbench for ARM (EWARM) toolchain V8.32.3
    • -
  • RealView Microcontroller Development Kit (MDK-ARM) toolchain V5.27.1
    • -
  • STM32CubeIDE toolchain V1.6.0
    • -
-

Backward compatibility

-

No compatibility break with previous version

-

Dependencies

-
-
-
- -
-

Main Changes

-

Maintenance release

-

Contents

- - - - - - - - - - - - -
Fixed bugs list
Headline
CodeSpell correction on TCPP0203 component driver files
-

Known Limitations

-

Outstanding bugs list : None

-

Requirements not met or planned in a forthcoming release : None

-

Development Toolchains and Compilers

-
    -
  • IAR Embedded Workbench for ARM (EWARM) toolchain V8.32.3
    • -
  • RealView Microcontroller Development Kit (MDK-ARM) toolchain V5.27.1
    • -
  • STM32CubeIDE toolchain V1.5.0
    • -
-

Backward compatibility

-

No compatibility break with previous version

-

Dependencies

-
-
-
- -
-

Main Changes

-

Maintenance release

-

Contents

- - - - - - - - - - - - -
Fixed bugs list
Headline
MCUAstyle correction on TCPP0203 component driver files
-

Known Limitations

-

Outstanding bugs list : None

-

Requirements not met or planned in a forthcoming release : None

-

Development Toolchains and Compilers

-
    -
  • IAR Embedded Workbench for ARM (EWARM) toolchain V8.32.3
    • -
  • RealView Microcontroller Development Kit (MDK-ARM) toolchain V5.27.1
    • -
  • STM32CubeIDE toolchain V1.5.0
    • -
-

Backward compatibility

-

No compatibility break with previous version

-

Dependencies

-
-
-
- -
-

Main Changes

-
    -
  • First official release of TCPP0203 Type-C port Protection Component drivers
    • -
-
-
-
-
-
-

For complete documentation on STM32,visit: [www.st.com/stm32]

-This release note uses up to date web standards and, for this reason, should not be opened with Internet Explorer but preferably with popular browsers such as Google Chrome, Mozilla Firefox, Opera or Microsoft Edge. -
- - diff --git a/hw/bsp/stm32n6/boards/stm32n657nucleo/tcpp0203/_htmresc/favicon.png b/hw/bsp/stm32n6/boards/stm32n657nucleo/tcpp0203/_htmresc/favicon.png deleted file mode 100644 index 06713eec4..000000000 Binary files a/hw/bsp/stm32n6/boards/stm32n657nucleo/tcpp0203/_htmresc/favicon.png and /dev/null differ diff --git a/hw/bsp/stm32n6/boards/stm32n657nucleo/tcpp0203/_htmresc/mini-st_2020.css b/hw/bsp/stm32n6/boards/stm32n657nucleo/tcpp0203/_htmresc/mini-st_2020.css deleted file mode 100644 index dd19969d1..000000000 --- a/hw/bsp/stm32n6/boards/stm32n657nucleo/tcpp0203/_htmresc/mini-st_2020.css +++ /dev/null @@ -1,1703 +0,0 @@ -@charset "UTF-8"; -/* - Flavor name: Custom (mini-custom) - Generated online - https://minicss.org/flavors - mini.css version: v3.0.1 -*/ -/* - Browsers resets and base typography. -*/ -/* Core module CSS variable definitions */ -:root { - --fore-color: #03234b; - --secondary-fore-color: #03234b; - --back-color: #ffffff; - --secondary-back-color: #ffffff; - --blockquote-color: #e6007e; - --pre-color: #e6007e; - --border-color: #3cb4e6; - --secondary-border-color: #3cb4e6; - --heading-ratio: 1.2; - --universal-margin: 0.5rem; - --universal-padding: 0.25rem; - --universal-border-radius: 0.075rem; - --background-margin: 1.5%; - --a-link-color: #3cb4e6; - --a-visited-color: #8c0078; } - -html { - font-size: 13.5px; } - -a, b, del, em, i, ins, q, span, strong, u { - font-size: 1em; } - -html, * { - font-family: -apple-system, BlinkMacSystemFont, Helvetica, arial, sans-serif; - line-height: 1.25; - -webkit-text-size-adjust: 100%; } - -* { - font-size: 1rem; } - -body { - margin: 0; - color: var(--fore-color); - @background: var(--back-color); - background: var(--back-color) linear-gradient(#ffd200, #ffd200) repeat-y left top; - background-size: var(--background-margin); - } - -details { - display: block; } - -summary { - display: list-item; } - -abbr[title] { - border-bottom: none; - text-decoration: underline dotted; } - -input { - overflow: visible; } - -img { - max-width: 100%; - height: auto; } - -h1, h2, h3, h4, h5, h6 { - line-height: 1.25; - margin: calc(1.5 * var(--universal-margin)) var(--universal-margin); - font-weight: 400; } - h1 small, h2 small, h3 small, h4 small, h5 small, h6 small { - color: var(--secondary-fore-color); - display: block; - margin-top: -0.25rem; } - -h1 { - font-size: calc(1rem * var(--heading-ratio) * var(--heading-ratio) * var(--heading-ratio)); } - -h2 { - font-size: calc(1rem * var(--heading-ratio) * var(--heading-ratio) ); - border-style: none none solid none ; - border-width: thin; - border-color: var(--border-color); } -h3 { - font-size: calc(1rem * var(--heading-ratio) ); } - -h4 { - font-size: calc(1rem * var(--heading-ratio)); } - -h5 { - font-size: 1rem; } - -h6 { - font-size: calc(1rem / var(--heading-ratio)); } - -p { - margin: var(--universal-margin); } - -ol, ul { - margin: var(--universal-margin); - padding-left: calc(3 * var(--universal-margin)); } - -b, strong { - font-weight: 700; } - -hr { - box-sizing: content-box; - border: 0; - line-height: 1.25em; - margin: var(--universal-margin); - height: 0.0714285714rem; - background: linear-gradient(to right, transparent, var(--border-color) 20%, var(--border-color) 80%, transparent); } - -blockquote { - display: block; - position: relative; - font-style: italic; - color: var(--secondary-fore-color); - margin: var(--universal-margin); - padding: calc(3 * var(--universal-padding)); - border: 0.0714285714rem solid var(--secondary-border-color); - border-left: 0.3rem solid var(--blockquote-color); - border-radius: 0 var(--universal-border-radius) var(--universal-border-radius) 0; } - blockquote:before { - position: absolute; - top: calc(0rem - var(--universal-padding)); - left: 0; - font-family: sans-serif; - font-size: 2rem; - font-weight: 800; - content: "\201c"; - color: var(--blockquote-color); } - blockquote[cite]:after { - font-style: normal; - font-size: 0.75em; - font-weight: 700; - content: "\a— " attr(cite); - white-space: pre; } - -code, kbd, pre, samp { - font-family: Menlo, Consolas, monospace; - font-size: 0.85em; } - -code { - background: var(--secondary-back-color); - border-radius: var(--universal-border-radius); - padding: calc(var(--universal-padding) / 4) calc(var(--universal-padding) / 2); } - -kbd { - background: var(--fore-color); - color: var(--back-color); - border-radius: var(--universal-border-radius); - padding: calc(var(--universal-padding) / 4) calc(var(--universal-padding) / 2); } - -pre { - overflow: auto; - background: var(--secondary-back-color); - padding: calc(1.5 * var(--universal-padding)); - margin: var(--universal-margin); - border: 0.0714285714rem solid var(--secondary-border-color); - border-left: 0.2857142857rem solid var(--pre-color); - border-radius: 0 var(--universal-border-radius) var(--universal-border-radius) 0; } - -sup, sub, code, kbd { - line-height: 0; - position: relative; - vertical-align: baseline; } - -small, sup, sub, figcaption { - font-size: 0.75em; } - -sup { - top: -0.5em; } - -sub { - bottom: -0.25em; } - -figure { - margin: var(--universal-margin); } - -figcaption { - color: var(--secondary-fore-color); } - -a { - text-decoration: none; } - a:link { - color: var(--a-link-color); } - a:visited { - color: var(--a-visited-color); } - a:hover, a:focus { - text-decoration: underline; } - -/* - Definitions for the grid system, cards and containers. -*/ -.container { - margin: 0 auto; - padding: 0 calc(1.5 * var(--universal-padding)); } - -.row { - box-sizing: border-box; - display: flex; - flex: 0 1 auto; - flex-flow: row wrap; - margin: 0 0 0 var(--background-margin); } - -.col-sm, -[class^='col-sm-'], -[class^='col-sm-offset-'], -.row[class*='cols-sm-'] > * { - box-sizing: border-box; - flex: 0 0 auto; - padding: 0 calc(var(--universal-padding) / 2); } - -.col-sm, -.row.cols-sm > * { - max-width: 100%; - flex-grow: 1; - flex-basis: 0; } - -.col-sm-1, -.row.cols-sm-1 > * { - max-width: 8.3333333333%; - flex-basis: 8.3333333333%; } - -.col-sm-offset-0 { - margin-left: 0; } - -.col-sm-2, -.row.cols-sm-2 > * { - max-width: 16.6666666667%; - flex-basis: 16.6666666667%; } - -.col-sm-offset-1 { - margin-left: 8.3333333333%; } - -.col-sm-3, -.row.cols-sm-3 > * { - max-width: 25%; - flex-basis: 25%; } - -.col-sm-offset-2 { - margin-left: 16.6666666667%; } - -.col-sm-4, -.row.cols-sm-4 > * { - max-width: 33.3333333333%; - flex-basis: 33.3333333333%; } - -.col-sm-offset-3 { - margin-left: 25%; } - -.col-sm-5, -.row.cols-sm-5 > * { - max-width: 41.6666666667%; - flex-basis: 41.6666666667%; } - -.col-sm-offset-4 { - margin-left: 33.3333333333%; } - -.col-sm-6, -.row.cols-sm-6 > * { - max-width: 50%; - flex-basis: 50%; } - -.col-sm-offset-5 { - margin-left: 41.6666666667%; } - -.col-sm-7, -.row.cols-sm-7 > * { - max-width: 58.3333333333%; - flex-basis: 58.3333333333%; } - -.col-sm-offset-6 { - margin-left: 50%; } - -.col-sm-8, -.row.cols-sm-8 > * { - max-width: 66.6666666667%; - flex-basis: 66.6666666667%; } - -.col-sm-offset-7 { - margin-left: 58.3333333333%; } - -.col-sm-9, -.row.cols-sm-9 > * { - max-width: 75%; - flex-basis: 75%; } - -.col-sm-offset-8 { - margin-left: 66.6666666667%; } - -.col-sm-10, -.row.cols-sm-10 > * { - max-width: 83.3333333333%; - flex-basis: 83.3333333333%; } - -.col-sm-offset-9 { - margin-left: 75%; } - -.col-sm-11, -.row.cols-sm-11 > * { - max-width: 91.6666666667%; - flex-basis: 91.6666666667%; } - -.col-sm-offset-10 { - margin-left: 83.3333333333%; } - -.col-sm-12, -.row.cols-sm-12 > * { - max-width: 100%; - flex-basis: 100%; } - -.col-sm-offset-11 { - margin-left: 91.6666666667%; } - -.col-sm-normal { - order: initial; } - -.col-sm-first { - order: -999; } - -.col-sm-last { - order: 999; } - -@media screen and (min-width: 500px) { - .col-md, - [class^='col-md-'], - [class^='col-md-offset-'], - .row[class*='cols-md-'] > * { - box-sizing: border-box; - flex: 0 0 auto; - padding: 0 calc(var(--universal-padding) / 2); } - - .col-md, - .row.cols-md > * { - max-width: 100%; - flex-grow: 1; - flex-basis: 0; } - - .col-md-1, - .row.cols-md-1 > * { - max-width: 8.3333333333%; - flex-basis: 8.3333333333%; } - - .col-md-offset-0 { - margin-left: 0; } - - .col-md-2, - .row.cols-md-2 > * { - max-width: 16.6666666667%; - flex-basis: 16.6666666667%; } - - .col-md-offset-1 { - margin-left: 8.3333333333%; } - - .col-md-3, - .row.cols-md-3 > * { - max-width: 25%; - flex-basis: 25%; } - - .col-md-offset-2 { - margin-left: 16.6666666667%; } - - .col-md-4, - .row.cols-md-4 > * { - max-width: 33.3333333333%; - flex-basis: 33.3333333333%; } - - .col-md-offset-3 { - margin-left: 25%; } - - .col-md-5, - .row.cols-md-5 > * { - max-width: 41.6666666667%; - flex-basis: 41.6666666667%; } - - .col-md-offset-4 { - margin-left: 33.3333333333%; } - - .col-md-6, - .row.cols-md-6 > * { - max-width: 50%; - flex-basis: 50%; } - - .col-md-offset-5 { - margin-left: 41.6666666667%; } - - .col-md-7, - .row.cols-md-7 > * { - max-width: 58.3333333333%; - flex-basis: 58.3333333333%; } - - .col-md-offset-6 { - margin-left: 50%; } - - .col-md-8, - .row.cols-md-8 > * { - max-width: 66.6666666667%; - flex-basis: 66.6666666667%; } - - .col-md-offset-7 { - margin-left: 58.3333333333%; } - - .col-md-9, - .row.cols-md-9 > * { - max-width: 75%; - flex-basis: 75%; } - - .col-md-offset-8 { - margin-left: 66.6666666667%; } - - .col-md-10, - .row.cols-md-10 > * { - max-width: 83.3333333333%; - flex-basis: 83.3333333333%; } - - .col-md-offset-9 { - margin-left: 75%; } - - .col-md-11, - .row.cols-md-11 > * { - max-width: 91.6666666667%; - flex-basis: 91.6666666667%; } - - .col-md-offset-10 { - margin-left: 83.3333333333%; } - - .col-md-12, - .row.cols-md-12 > * { - max-width: 100%; - flex-basis: 100%; } - - .col-md-offset-11 { - margin-left: 91.6666666667%; } - - .col-md-normal { - order: initial; } - - .col-md-first { - order: -999; } - - .col-md-last { - order: 999; } } -@media screen and (min-width: 1280px) { - .col-lg, - [class^='col-lg-'], - [class^='col-lg-offset-'], - .row[class*='cols-lg-'] > * { - box-sizing: border-box; - flex: 0 0 auto; - padding: 0 calc(var(--universal-padding) / 2); } - - .col-lg, - .row.cols-lg > * { - max-width: 100%; - flex-grow: 1; - flex-basis: 0; } - - .col-lg-1, - .row.cols-lg-1 > * { - max-width: 8.3333333333%; - flex-basis: 8.3333333333%; } - - .col-lg-offset-0 { - margin-left: 0; } - - .col-lg-2, - .row.cols-lg-2 > * { - max-width: 16.6666666667%; - flex-basis: 16.6666666667%; } - - .col-lg-offset-1 { - margin-left: 8.3333333333%; } - - .col-lg-3, - .row.cols-lg-3 > * { - max-width: 25%; - flex-basis: 25%; } - - .col-lg-offset-2 { - margin-left: 16.6666666667%; } - - .col-lg-4, - .row.cols-lg-4 > * { - max-width: 33.3333333333%; - flex-basis: 33.3333333333%; } - - .col-lg-offset-3 { - margin-left: 25%; } - - .col-lg-5, - .row.cols-lg-5 > * { - max-width: 41.6666666667%; - flex-basis: 41.6666666667%; } - - .col-lg-offset-4 { - margin-left: 33.3333333333%; } - - .col-lg-6, - .row.cols-lg-6 > * { - max-width: 50%; - flex-basis: 50%; } - - .col-lg-offset-5 { - margin-left: 41.6666666667%; } - - .col-lg-7, - .row.cols-lg-7 > * { - max-width: 58.3333333333%; - flex-basis: 58.3333333333%; } - - .col-lg-offset-6 { - margin-left: 50%; } - - .col-lg-8, - .row.cols-lg-8 > * { - max-width: 66.6666666667%; - flex-basis: 66.6666666667%; } - - .col-lg-offset-7 { - margin-left: 58.3333333333%; } - - .col-lg-9, - .row.cols-lg-9 > * { - max-width: 75%; - flex-basis: 75%; } - - .col-lg-offset-8 { - margin-left: 66.6666666667%; } - - .col-lg-10, - .row.cols-lg-10 > * { - max-width: 83.3333333333%; - flex-basis: 83.3333333333%; } - - .col-lg-offset-9 { - margin-left: 75%; } - - .col-lg-11, - .row.cols-lg-11 > * { - max-width: 91.6666666667%; - flex-basis: 91.6666666667%; } - - .col-lg-offset-10 { - margin-left: 83.3333333333%; } - - .col-lg-12, - .row.cols-lg-12 > * { - max-width: 100%; - flex-basis: 100%; } - - .col-lg-offset-11 { - margin-left: 91.6666666667%; } - - .col-lg-normal { - order: initial; } - - .col-lg-first { - order: -999; } - - .col-lg-last { - order: 999; } } -/* Card component CSS variable definitions */ -:root { - --card-back-color: #3cb4e6; - --card-fore-color: #03234b; - --card-border-color: #03234b; } - -.card { - display: flex; - flex-direction: column; - justify-content: space-between; - align-self: center; - position: relative; - width: 100%; - background: var(--card-back-color); - color: var(--card-fore-color); - border: 0.0714285714rem solid var(--card-border-color); - border-radius: var(--universal-border-radius); - margin: var(--universal-margin); - overflow: hidden; } - @media screen and (min-width: 320px) { - .card { - max-width: 320px; } } - .card > .sectione { - background: var(--card-back-color); - color: var(--card-fore-color); - box-sizing: border-box; - margin: 0; - border: 0; - border-radius: 0; - border-bottom: 0.0714285714rem solid var(--card-border-color); - padding: var(--universal-padding); - width: 100%; } - .card > .sectione.media { - height: 200px; - padding: 0; - -o-object-fit: cover; - object-fit: cover; } - .card > .sectione:last-child { - border-bottom: 0; } - -/* - Custom elements for card elements. -*/ -@media screen and (min-width: 240px) { - .card.small { - max-width: 240px; } } -@media screen and (min-width: 480px) { - .card.large { - max-width: 480px; } } -.card.fluid { - max-width: 100%; - width: auto; } - -.card.warning { - --card-back-color: #e5b8b7; - --card-fore-color: #3b234b; - --card-border-color: #8c0078; } - -.card.error { - --card-back-color: #464650; - --card-fore-color: #ffffff; - --card-border-color: #8c0078; } - -.card > .sectione.dark { - --card-back-color: #3b234b; - --card-fore-color: #ffffff; } - -.card > .sectione.double-padded { - padding: calc(1.5 * var(--universal-padding)); } - -/* - Definitions for forms and input elements. -*/ -/* Input_control module CSS variable definitions */ -:root { - --form-back-color: #ffe97f; - --form-fore-color: #03234b; - --form-border-color: #3cb4e6; - --input-back-color: #ffffff; - --input-fore-color: #03234b; - --input-border-color: #3cb4e6; - --input-focus-color: #0288d1; - --input-invalid-color: #d32f2f; - --button-back-color: #e2e2e2; - --button-hover-back-color: #dcdcdc; - --button-fore-color: #212121; - --button-border-color: transparent; - --button-hover-border-color: transparent; - --button-group-border-color: rgba(124, 124, 124, 0.54); } - -form { - background: var(--form-back-color); - color: var(--form-fore-color); - border: 0.0714285714rem solid var(--form-border-color); - border-radius: var(--universal-border-radius); - margin: var(--universal-margin); - padding: calc(2 * var(--universal-padding)) var(--universal-padding); } - -fieldset { - border: 0.0714285714rem solid var(--form-border-color); - border-radius: var(--universal-border-radius); - margin: calc(var(--universal-margin) / 4); - padding: var(--universal-padding); } - -legend { - box-sizing: border-box; - display: table; - max-width: 100%; - white-space: normal; - font-weight: 500; - padding: calc(var(--universal-padding) / 2); } - -label { - padding: calc(var(--universal-padding) / 2) var(--universal-padding); } - -.input-group { - display: inline-block; } - .input-group.fluid { - display: flex; - align-items: center; - justify-content: center; } - .input-group.fluid > input { - max-width: 100%; - flex-grow: 1; - flex-basis: 0px; } - @media screen and (max-width: 499px) { - .input-group.fluid { - align-items: stretch; - flex-direction: column; } } - .input-group.vertical { - display: flex; - align-items: stretch; - flex-direction: column; } - .input-group.vertical > input { - max-width: 100%; - flex-grow: 1; - flex-basis: 0px; } - -[type="number"]::-webkit-inner-spin-button, [type="number"]::-webkit-outer-spin-button { - height: auto; } - -[type="search"] { - -webkit-appearance: textfield; - outline-offset: -2px; } - -[type="search"]::-webkit-search-cancel-button, -[type="search"]::-webkit-search-decoration { - -webkit-appearance: none; } - -input:not([type]), [type="text"], [type="email"], [type="number"], [type="search"], -[type="password"], [type="url"], [type="tel"], [type="checkbox"], [type="radio"], textarea, select { - box-sizing: border-box; - background: var(--input-back-color); - color: var(--input-fore-color); - border: 0.0714285714rem solid var(--input-border-color); - border-radius: var(--universal-border-radius); - margin: calc(var(--universal-margin) / 2); - padding: var(--universal-padding) calc(1.5 * var(--universal-padding)); } - -input:not([type="button"]):not([type="submit"]):not([type="reset"]):hover, input:not([type="button"]):not([type="submit"]):not([type="reset"]):focus, textarea:hover, textarea:focus, select:hover, select:focus { - border-color: var(--input-focus-color); - box-shadow: none; } -input:not([type="button"]):not([type="submit"]):not([type="reset"]):invalid, input:not([type="button"]):not([type="submit"]):not([type="reset"]):focus:invalid, textarea:invalid, textarea:focus:invalid, select:invalid, select:focus:invalid { - border-color: var(--input-invalid-color); - box-shadow: none; } -input:not([type="button"]):not([type="submit"]):not([type="reset"])[readonly], textarea[readonly], select[readonly] { - background: var(--secondary-back-color); } - -select { - max-width: 100%; } - -option { - overflow: hidden; - text-overflow: ellipsis; } - -[type="checkbox"], [type="radio"] { - -webkit-appearance: none; - -moz-appearance: none; - appearance: none; - position: relative; - height: calc(1rem + var(--universal-padding) / 2); - width: calc(1rem + var(--universal-padding) / 2); - vertical-align: text-bottom; - padding: 0; - flex-basis: calc(1rem + var(--universal-padding) / 2) !important; - flex-grow: 0 !important; } - [type="checkbox"]:checked:before, [type="radio"]:checked:before { - position: absolute; } - -[type="checkbox"]:checked:before { - content: '\2713'; - font-family: sans-serif; - font-size: calc(1rem + var(--universal-padding) / 2); - top: calc(0rem - var(--universal-padding)); - left: calc(var(--universal-padding) / 4); } - -[type="radio"] { - border-radius: 100%; } - [type="radio"]:checked:before { - border-radius: 100%; - content: ''; - top: calc(0.0714285714rem + var(--universal-padding) / 2); - left: calc(0.0714285714rem + var(--universal-padding) / 2); - background: var(--input-fore-color); - width: 0.5rem; - height: 0.5rem; } - -:placeholder-shown { - color: var(--input-fore-color); } - -::-ms-placeholder { - color: var(--input-fore-color); - opacity: 0.54; } - -button::-moz-focus-inner, [type="button"]::-moz-focus-inner, [type="reset"]::-moz-focus-inner, [type="submit"]::-moz-focus-inner { - border-style: none; - padding: 0; } - -button, html [type="button"], [type="reset"], [type="submit"] { - -webkit-appearance: button; } - -button { - overflow: visible; - text-transform: none; } - -button, [type="button"], [type="submit"], [type="reset"], -a.button, label.button, .button, -a[role="button"], label[role="button"], [role="button"] { - display: inline-block; - background: var(--button-back-color); - color: var(--button-fore-color); - border: 0.0714285714rem solid var(--button-border-color); - border-radius: var(--universal-border-radius); - padding: var(--universal-padding) calc(1.5 * var(--universal-padding)); - margin: var(--universal-margin); - text-decoration: none; - cursor: pointer; - transition: background 0.3s; } - button:hover, button:focus, [type="button"]:hover, [type="button"]:focus, [type="submit"]:hover, [type="submit"]:focus, [type="reset"]:hover, [type="reset"]:focus, - a.button:hover, - a.button:focus, label.button:hover, label.button:focus, .button:hover, .button:focus, - a[role="button"]:hover, - a[role="button"]:focus, label[role="button"]:hover, label[role="button"]:focus, [role="button"]:hover, [role="button"]:focus { - background: var(--button-hover-back-color); - border-color: var(--button-hover-border-color); } - -input:disabled, input[disabled], textarea:disabled, textarea[disabled], select:disabled, select[disabled], button:disabled, button[disabled], .button:disabled, .button[disabled], [role="button"]:disabled, [role="button"][disabled] { - cursor: not-allowed; - opacity: 0.75; } - -.button-group { - display: flex; - border: 0.0714285714rem solid var(--button-group-border-color); - border-radius: var(--universal-border-radius); - margin: var(--universal-margin); } - .button-group > button, .button-group [type="button"], .button-group > [type="submit"], .button-group > [type="reset"], .button-group > .button, .button-group > [role="button"] { - margin: 0; - max-width: 100%; - flex: 1 1 auto; - text-align: center; - border: 0; - border-radius: 0; - box-shadow: none; } - .button-group > :not(:first-child) { - border-left: 0.0714285714rem solid var(--button-group-border-color); } - @media screen and (max-width: 499px) { - .button-group { - flex-direction: column; } - .button-group > :not(:first-child) { - border: 0; - border-top: 0.0714285714rem solid var(--button-group-border-color); } } - -/* - Custom elements for forms and input elements. -*/ -button.primary, [type="button"].primary, [type="submit"].primary, [type="reset"].primary, .button.primary, [role="button"].primary { - --button-back-color: #1976d2; - --button-fore-color: #f8f8f8; } - button.primary:hover, button.primary:focus, [type="button"].primary:hover, [type="button"].primary:focus, [type="submit"].primary:hover, [type="submit"].primary:focus, [type="reset"].primary:hover, [type="reset"].primary:focus, .button.primary:hover, .button.primary:focus, [role="button"].primary:hover, [role="button"].primary:focus { - --button-hover-back-color: #1565c0; } - -button.secondary, [type="button"].secondary, [type="submit"].secondary, [type="reset"].secondary, .button.secondary, [role="button"].secondary { - --button-back-color: #d32f2f; - --button-fore-color: #f8f8f8; } - button.secondary:hover, button.secondary:focus, [type="button"].secondary:hover, [type="button"].secondary:focus, [type="submit"].secondary:hover, [type="submit"].secondary:focus, [type="reset"].secondary:hover, [type="reset"].secondary:focus, .button.secondary:hover, .button.secondary:focus, [role="button"].secondary:hover, [role="button"].secondary:focus { - --button-hover-back-color: #c62828; } - -button.tertiary, [type="button"].tertiary, [type="submit"].tertiary, [type="reset"].tertiary, .button.tertiary, [role="button"].tertiary { - --button-back-color: #308732; - --button-fore-color: #f8f8f8; } - button.tertiary:hover, button.tertiary:focus, [type="button"].tertiary:hover, [type="button"].tertiary:focus, [type="submit"].tertiary:hover, [type="submit"].tertiary:focus, [type="reset"].tertiary:hover, [type="reset"].tertiary:focus, .button.tertiary:hover, .button.tertiary:focus, [role="button"].tertiary:hover, [role="button"].tertiary:focus { - --button-hover-back-color: #277529; } - -button.inverse, [type="button"].inverse, [type="submit"].inverse, [type="reset"].inverse, .button.inverse, [role="button"].inverse { - --button-back-color: #212121; - --button-fore-color: #f8f8f8; } - button.inverse:hover, button.inverse:focus, [type="button"].inverse:hover, [type="button"].inverse:focus, [type="submit"].inverse:hover, [type="submit"].inverse:focus, [type="reset"].inverse:hover, [type="reset"].inverse:focus, .button.inverse:hover, .button.inverse:focus, [role="button"].inverse:hover, [role="button"].inverse:focus { - --button-hover-back-color: #111; } - -button.small, [type="button"].small, [type="submit"].small, [type="reset"].small, .button.small, [role="button"].small { - padding: calc(0.5 * var(--universal-padding)) calc(0.75 * var(--universal-padding)); - margin: var(--universal-margin); } - -button.large, [type="button"].large, [type="submit"].large, [type="reset"].large, .button.large, [role="button"].large { - padding: calc(1.5 * var(--universal-padding)) calc(2 * var(--universal-padding)); - margin: var(--universal-margin); } - -/* - Definitions for navigation elements. -*/ -/* Navigation module CSS variable definitions */ -:root { - --header-back-color: #03234b; - --header-hover-back-color: #ffd200; - --header-fore-color: #ffffff; - --header-border-color: #3cb4e6; - --nav-back-color: #ffffff; - --nav-hover-back-color: #ffe97f; - --nav-fore-color: #e6007e; - --nav-border-color: #3cb4e6; - --nav-link-color: #3cb4e6; - --footer-fore-color: #ffffff; - --footer-back-color: #03234b; - --footer-border-color: #3cb4e6; - --footer-link-color: #3cb4e6; - --drawer-back-color: #ffffff; - --drawer-hover-back-color: #ffe97f; - --drawer-border-color: #3cb4e6; - --drawer-close-color: #e6007e; } - -header { - height: 2.75rem; - background: var(--header-back-color); - color: var(--header-fore-color); - border-bottom: 0.0714285714rem solid var(--header-border-color); - padding: calc(var(--universal-padding) / 4) 0; - white-space: nowrap; - overflow-x: auto; - overflow-y: hidden; } - header.row { - box-sizing: content-box; } - header .logo { - color: var(--header-fore-color); - font-size: 1.75rem; - padding: var(--universal-padding) calc(2 * var(--universal-padding)); - text-decoration: none; } - header button, header [type="button"], header .button, header [role="button"] { - box-sizing: border-box; - position: relative; - top: calc(0rem - var(--universal-padding) / 4); - height: calc(3.1875rem + var(--universal-padding) / 2); - background: var(--header-back-color); - line-height: calc(3.1875rem - var(--universal-padding) * 1.5); - text-align: center; - color: var(--header-fore-color); - border: 0; - border-radius: 0; - margin: 0; - text-transform: uppercase; } - header button:hover, header button:focus, header [type="button"]:hover, header [type="button"]:focus, header .button:hover, header .button:focus, header [role="button"]:hover, header [role="button"]:focus { - background: var(--header-hover-back-color); } - -nav { - background: var(--nav-back-color); - color: var(--nav-fore-color); - border: 0.0714285714rem solid var(--nav-border-color); - border-radius: var(--universal-border-radius); - margin: var(--universal-margin); } - nav * { - padding: var(--universal-padding) calc(1.5 * var(--universal-padding)); } - nav a, nav a:visited { - display: block; - color: var(--nav-link-color); - border-radius: var(--universal-border-radius); - transition: background 0.3s; } - nav a:hover, nav a:focus, nav a:visited:hover, nav a:visited:focus { - text-decoration: none; - background: var(--nav-hover-back-color); } - nav .sublink-1 { - position: relative; - margin-left: calc(2 * var(--universal-padding)); } - nav .sublink-1:before { - position: absolute; - left: calc(var(--universal-padding) - 1 * var(--universal-padding)); - top: -0.0714285714rem; - content: ''; - height: 100%; - border: 0.0714285714rem solid var(--nav-border-color); - border-left: 0; } - nav .sublink-2 { - position: relative; - margin-left: calc(4 * var(--universal-padding)); } - nav .sublink-2:before { - position: absolute; - left: calc(var(--universal-padding) - 3 * var(--universal-padding)); - top: -0.0714285714rem; - content: ''; - height: 100%; - border: 0.0714285714rem solid var(--nav-border-color); - border-left: 0; } - -footer { - background: var(--footer-back-color); - color: var(--footer-fore-color); - border-top: 0.0714285714rem solid var(--footer-border-color); - padding: calc(2 * var(--universal-padding)) var(--universal-padding); - font-size: 0.875rem; } - footer a, footer a:visited { - color: var(--footer-link-color); } - -header.sticky { - position: -webkit-sticky; - position: sticky; - z-index: 1101; - top: 0; } - -footer.sticky { - position: -webkit-sticky; - position: sticky; - z-index: 1101; - bottom: 0; } - -.drawer-toggle:before { - display: inline-block; - position: relative; - vertical-align: bottom; - content: '\00a0\2261\00a0'; - font-family: sans-serif; - font-size: 1.5em; } -@media screen and (min-width: 500px) { - .drawer-toggle:not(.persistent) { - display: none; } } - -[type="checkbox"].drawer { - height: 1px; - width: 1px; - margin: -1px; - overflow: hidden; - position: absolute; - clip: rect(0 0 0 0); - -webkit-clip-path: inset(100%); - clip-path: inset(100%); } - [type="checkbox"].drawer + * { - display: block; - box-sizing: border-box; - position: fixed; - top: 0; - width: 320px; - height: 100vh; - overflow-y: auto; - background: var(--drawer-back-color); - border: 0.0714285714rem solid var(--drawer-border-color); - border-radius: 0; - margin: 0; - z-index: 1110; - right: -320px; - transition: right 0.3s; } - [type="checkbox"].drawer + * .drawer-close { - position: absolute; - top: var(--universal-margin); - right: var(--universal-margin); - z-index: 1111; - width: 2rem; - height: 2rem; - border-radius: var(--universal-border-radius); - padding: var(--universal-padding); - margin: 0; - cursor: pointer; - transition: background 0.3s; } - [type="checkbox"].drawer + * .drawer-close:before { - display: block; - content: '\00D7'; - color: var(--drawer-close-color); - position: relative; - font-family: sans-serif; - font-size: 2rem; - line-height: 1; - text-align: center; } - [type="checkbox"].drawer + * .drawer-close:hover, [type="checkbox"].drawer + * .drawer-close:focus { - background: var(--drawer-hover-back-color); } - @media screen and (max-width: 320px) { - [type="checkbox"].drawer + * { - width: 100%; } } - [type="checkbox"].drawer:checked + * { - right: 0; } - @media screen and (min-width: 500px) { - [type="checkbox"].drawer:not(.persistent) + * { - position: static; - height: 100%; - z-index: 1100; } - [type="checkbox"].drawer:not(.persistent) + * .drawer-close { - display: none; } } - -/* - Definitions for the responsive table component. -*/ -/* Table module CSS variable definitions. */ -:root { - --table-border-color: #03234b; - --table-border-separator-color: #03234b; - --table-head-back-color: #03234b; - --table-head-fore-color: #ffffff; - --table-body-back-color: #ffffff; - --table-body-fore-color: #03234b; - --table-body-alt-back-color: #f4f4f4; } - -table { - border-collapse: separate; - border-spacing: 0; - margin: 0; - display: flex; - flex: 0 1 auto; - flex-flow: row wrap; - padding: var(--universal-padding); - padding-top: 0; } - table caption { - font-size: 1rem; - margin: calc(2 * var(--universal-margin)) 0; - max-width: 100%; - flex: 0 0 100%; } - table thead, table tbody { - display: flex; - flex-flow: row wrap; - border: 0.0714285714rem solid var(--table-border-color); } - table thead { - z-index: 999; - border-radius: var(--universal-border-radius) var(--universal-border-radius) 0 0; - border-bottom: 0.0714285714rem solid var(--table-border-separator-color); } - table tbody { - border-top: 0; - margin-top: calc(0 - var(--universal-margin)); - border-radius: 0 0 var(--universal-border-radius) var(--universal-border-radius); } - table tr { - display: flex; - padding: 0; } - table th, table td { - padding: calc(0.5 * var(--universal-padding)); - font-size: 0.9rem; } - table th { - text-align: left; - background: var(--table-head-back-color); - color: var(--table-head-fore-color); } - table td { - background: var(--table-body-back-color); - color: var(--table-body-fore-color); - border-top: 0.0714285714rem solid var(--table-border-color); } - -table:not(.horizontal) { - overflow: auto; - max-height: 100%; } - table:not(.horizontal) thead, table:not(.horizontal) tbody { - max-width: 100%; - flex: 0 0 100%; } - table:not(.horizontal) tr { - flex-flow: row wrap; - flex: 0 0 100%; } - table:not(.horizontal) th, table:not(.horizontal) td { - flex: 1 0 0%; - overflow: hidden; - text-overflow: ellipsis; } - table:not(.horizontal) thead { - position: sticky; - top: 0; } - table:not(.horizontal) tbody tr:first-child td { - border-top: 0; } - -table.horizontal { - border: 0; } - table.horizontal thead, table.horizontal tbody { - border: 0; - flex: .2 0 0; - flex-flow: row nowrap; } - table.horizontal tbody { - overflow: auto; - justify-content: space-between; - flex: .8 0 0; - margin-left: 0; - padding-bottom: calc(var(--universal-padding) / 4); } - table.horizontal tr { - flex-direction: column; - flex: 1 0 auto; } - table.horizontal th, table.horizontal td { - width: auto; - border: 0; - border-bottom: 0.0714285714rem solid var(--table-border-color); } - table.horizontal th:not(:first-child), table.horizontal td:not(:first-child) { - border-top: 0; } - table.horizontal th { - text-align: right; - border-left: 0.0714285714rem solid var(--table-border-color); - border-right: 0.0714285714rem solid var(--table-border-separator-color); } - table.horizontal thead tr:first-child { - padding-left: 0; } - table.horizontal th:first-child, table.horizontal td:first-child { - border-top: 0.0714285714rem solid var(--table-border-color); } - table.horizontal tbody tr:last-child td { - border-right: 0.0714285714rem solid var(--table-border-color); } - table.horizontal tbody tr:last-child td:first-child { - border-top-right-radius: 0.25rem; } - table.horizontal tbody tr:last-child td:last-child { - border-bottom-right-radius: 0.25rem; } - table.horizontal thead tr:first-child th:first-child { - border-top-left-radius: 0.25rem; } - table.horizontal thead tr:first-child th:last-child { - border-bottom-left-radius: 0.25rem; } - -@media screen and (max-width: 499px) { - table, table.horizontal { - border-collapse: collapse; - border: 0; - width: 100%; - display: table; } - table thead, table th, table.horizontal thead, table.horizontal th { - border: 0; - height: 1px; - width: 1px; - margin: -1px; - overflow: hidden; - padding: 0; - position: absolute; - clip: rect(0 0 0 0); - -webkit-clip-path: inset(100%); - clip-path: inset(100%); } - table tbody, table.horizontal tbody { - border: 0; - display: table-row-group; } - table tr, table.horizontal tr { - display: block; - border: 0.0714285714rem solid var(--table-border-color); - border-radius: var(--universal-border-radius); - background: #ffffff; - padding: var(--universal-padding); - margin: var(--universal-margin); - margin-bottom: calc(1 * var(--universal-margin)); } - table th, table td, table.horizontal th, table.horizontal td { - width: auto; } - table td, table.horizontal td { - display: block; - border: 0; - text-align: right; } - table td:before, table.horizontal td:before { - content: attr(data-label); - float: left; - font-weight: 600; } - table th:first-child, table td:first-child, table.horizontal th:first-child, table.horizontal td:first-child { - border-top: 0; } - table tbody tr:last-child td, table.horizontal tbody tr:last-child td { - border-right: 0; } } -table tr:nth-of-type(2n) > td { - background: var(--table-body-alt-back-color); } - -@media screen and (max-width: 500px) { - table tr:nth-of-type(2n) { - background: var(--table-body-alt-back-color); } } -:root { - --table-body-hover-back-color: #90caf9; } - -table.hoverable tr:hover, table.hoverable tr:hover > td, table.hoverable tr:focus, table.hoverable tr:focus > td { - background: var(--table-body-hover-back-color); } - -@media screen and (max-width: 500px) { - table.hoverable tr:hover, table.hoverable tr:hover > td, table.hoverable tr:focus, table.hoverable tr:focus > td { - background: var(--table-body-hover-back-color); } } -/* - Definitions for contextual background elements, toasts and tooltips. -*/ -/* Contextual module CSS variable definitions */ -:root { - --mark-back-color: #3cb4e6; - --mark-fore-color: #ffffff; } - -mark { - background: var(--mark-back-color); - color: var(--mark-fore-color); - font-size: 0.95em; - line-height: 1em; - border-radius: var(--universal-border-radius); - padding: calc(var(--universal-padding) / 4) var(--universal-padding); } - mark.inline-block { - display: inline-block; - font-size: 1em; - line-height: 1.4; - padding: calc(var(--universal-padding) / 2) var(--universal-padding); } - -:root { - --toast-back-color: #424242; - --toast-fore-color: #fafafa; } - -.toast { - position: fixed; - bottom: calc(var(--universal-margin) * 3); - left: 50%; - transform: translate(-50%, -50%); - z-index: 1111; - color: var(--toast-fore-color); - background: var(--toast-back-color); - border-radius: calc(var(--universal-border-radius) * 16); - padding: var(--universal-padding) calc(var(--universal-padding) * 3); } - -:root { - --tooltip-back-color: #212121; - --tooltip-fore-color: #fafafa; } - -.tooltip { - position: relative; - display: inline-block; } - .tooltip:before, .tooltip:after { - position: absolute; - opacity: 0; - clip: rect(0 0 0 0); - -webkit-clip-path: inset(100%); - clip-path: inset(100%); - transition: all 0.3s; - z-index: 1010; - left: 50%; } - .tooltip:not(.bottom):before, .tooltip:not(.bottom):after { - bottom: 75%; } - .tooltip.bottom:before, .tooltip.bottom:after { - top: 75%; } - .tooltip:hover:before, .tooltip:hover:after, .tooltip:focus:before, .tooltip:focus:after { - opacity: 1; - clip: auto; - -webkit-clip-path: inset(0%); - clip-path: inset(0%); } - .tooltip:before { - content: ''; - background: transparent; - border: var(--universal-margin) solid transparent; - left: calc(50% - var(--universal-margin)); } - .tooltip:not(.bottom):before { - border-top-color: #212121; } - .tooltip.bottom:before { - border-bottom-color: #212121; } - .tooltip:after { - content: attr(aria-label); - color: var(--tooltip-fore-color); - background: var(--tooltip-back-color); - border-radius: var(--universal-border-radius); - padding: var(--universal-padding); - white-space: nowrap; - transform: translateX(-50%); } - .tooltip:not(.bottom):after { - margin-bottom: calc(2 * var(--universal-margin)); } - .tooltip.bottom:after { - margin-top: calc(2 * var(--universal-margin)); } - -:root { - --modal-overlay-color: rgba(0, 0, 0, 0.45); - --modal-close-color: #e6007e; - --modal-close-hover-color: #ffe97f; } - -[type="checkbox"].modal { - height: 1px; - width: 1px; - margin: -1px; - overflow: hidden; - position: absolute; - clip: rect(0 0 0 0); - -webkit-clip-path: inset(100%); - clip-path: inset(100%); } - [type="checkbox"].modal + div { - position: fixed; - top: 0; - left: 0; - display: none; - width: 100vw; - height: 100vh; - background: var(--modal-overlay-color); } - [type="checkbox"].modal + div .card { - margin: 0 auto; - max-height: 50vh; - overflow: auto; } - [type="checkbox"].modal + div .card .modal-close { - position: absolute; - top: 0; - right: 0; - width: 1.75rem; - height: 1.75rem; - border-radius: var(--universal-border-radius); - padding: var(--universal-padding); - margin: 0; - cursor: pointer; - transition: background 0.3s; } - [type="checkbox"].modal + div .card .modal-close:before { - display: block; - content: '\00D7'; - color: var(--modal-close-color); - position: relative; - font-family: sans-serif; - font-size: 1.75rem; - line-height: 1; - text-align: center; } - [type="checkbox"].modal + div .card .modal-close:hover, [type="checkbox"].modal + div .card .modal-close:focus { - background: var(--modal-close-hover-color); } - [type="checkbox"].modal:checked + div { - display: flex; - flex: 0 1 auto; - z-index: 1200; } - [type="checkbox"].modal:checked + div .card .modal-close { - z-index: 1211; } - -:root { - --collapse-label-back-color: #03234b; - --collapse-label-fore-color: #ffffff; - --collapse-label-hover-back-color: #3cb4e6; - --collapse-selected-label-back-color: #3cb4e6; - --collapse-border-color: var(--collapse-label-back-color); - --collapse-selected-border-color: #ceecf8; - --collapse-content-back-color: #ffffff; - --collapse-selected-label-border-color: #3cb4e6; } - -.collapse { - width: calc(100% - 2 * var(--universal-margin)); - opacity: 1; - display: flex; - flex-direction: column; - margin: var(--universal-margin); - border-radius: var(--universal-border-radius); } - .collapse > [type="radio"], .collapse > [type="checkbox"] { - height: 1px; - width: 1px; - margin: -1px; - overflow: hidden; - position: absolute; - clip: rect(0 0 0 0); - -webkit-clip-path: inset(100%); - clip-path: inset(100%); } - .collapse > label { - flex-grow: 1; - display: inline-block; - height: 1.25rem; - cursor: pointer; - transition: background 0.2s; - color: var(--collapse-label-fore-color); - background: var(--collapse-label-back-color); - border: 0.0714285714rem solid var(--collapse-selected-border-color); - padding: calc(1.25 * var(--universal-padding)); } - .collapse > label:hover, .collapse > label:focus { - background: var(--collapse-label-hover-back-color); } - .collapse > label + div { - flex-basis: auto; - height: 1px; - width: 1px; - margin: -1px; - overflow: hidden; - position: absolute; - clip: rect(0 0 0 0); - -webkit-clip-path: inset(100%); - clip-path: inset(100%); - transition: max-height 0.3s; - max-height: 1px; } - .collapse > :checked + label { - background: var(--collapse-selected-label-back-color); - border-color: var(--collapse-selected-label-border-color); } - .collapse > :checked + label + div { - box-sizing: border-box; - position: relative; - width: 100%; - height: auto; - overflow: auto; - margin: 0; - background: var(--collapse-content-back-color); - border: 0.0714285714rem solid var(--collapse-selected-border-color); - border-top: 0; - padding: var(--universal-padding); - clip: auto; - -webkit-clip-path: inset(0%); - clip-path: inset(0%); - max-height: 100%; } - .collapse > label:not(:first-of-type) { - border-top: 0; } - .collapse > label:first-of-type { - border-radius: var(--universal-border-radius) var(--universal-border-radius) 0 0; } - .collapse > label:last-of-type:not(:first-of-type) { - border-radius: 0 0 var(--universal-border-radius) var(--universal-border-radius); } - .collapse > label:last-of-type:first-of-type { - border-radius: var(--universal-border-radius); } - .collapse > :checked:last-of-type:not(:first-of-type) + label { - border-radius: 0; } - .collapse > :checked:last-of-type + label + div { - border-radius: 0 0 var(--universal-border-radius) var(--universal-border-radius); } - -/* - Custom elements for contextual background elements, toasts and tooltips. -*/ -mark.tertiary { - --mark-back-color: #3cb4e6; } - -mark.tag { - padding: calc(var(--universal-padding)/2) var(--universal-padding); - border-radius: 1em; } - -/* - Definitions for progress elements and spinners. -*/ -/* Progress module CSS variable definitions */ -:root { - --progress-back-color: #3cb4e6; - --progress-fore-color: #555; } - -progress { - display: block; - vertical-align: baseline; - -webkit-appearance: none; - -moz-appearance: none; - appearance: none; - height: 0.75rem; - width: calc(100% - 2 * var(--universal-margin)); - margin: var(--universal-margin); - border: 0; - border-radius: calc(2 * var(--universal-border-radius)); - background: var(--progress-back-color); - color: var(--progress-fore-color); } - progress::-webkit-progress-value { - background: var(--progress-fore-color); - border-top-left-radius: calc(2 * var(--universal-border-radius)); - border-bottom-left-radius: calc(2 * var(--universal-border-radius)); } - progress::-webkit-progress-bar { - background: var(--progress-back-color); } - progress::-moz-progress-bar { - background: var(--progress-fore-color); - border-top-left-radius: calc(2 * var(--universal-border-radius)); - border-bottom-left-radius: calc(2 * var(--universal-border-radius)); } - progress[value="1000"]::-webkit-progress-value { - border-radius: calc(2 * var(--universal-border-radius)); } - progress[value="1000"]::-moz-progress-bar { - border-radius: calc(2 * var(--universal-border-radius)); } - progress.inline { - display: inline-block; - vertical-align: middle; - width: 60%; } - -:root { - --spinner-back-color: #ddd; - --spinner-fore-color: #555; } - -@keyframes spinner-donut-anim { - 0% { - transform: rotate(0deg); } - 100% { - transform: rotate(360deg); } } -.spinner { - display: inline-block; - margin: var(--universal-margin); - border: 0.25rem solid var(--spinner-back-color); - border-left: 0.25rem solid var(--spinner-fore-color); - border-radius: 50%; - width: 1.25rem; - height: 1.25rem; - animation: spinner-donut-anim 1.2s linear infinite; } - -/* - Custom elements for progress bars and spinners. -*/ -progress.primary { - --progress-fore-color: #1976d2; } - -progress.secondary { - --progress-fore-color: #d32f2f; } - -progress.tertiary { - --progress-fore-color: #308732; } - -.spinner.primary { - --spinner-fore-color: #1976d2; } - -.spinner.secondary { - --spinner-fore-color: #d32f2f; } - -.spinner.tertiary { - --spinner-fore-color: #308732; } - -/* - Definitions for icons - powered by Feather (https://feathericons.com/). -*/ -span[class^='icon-'] { - display: inline-block; - height: 1em; - width: 1em; - vertical-align: -0.125em; - background-size: contain; - margin: 0 calc(var(--universal-margin) / 4); } - span[class^='icon-'].secondary { - -webkit-filter: invert(25%); - filter: invert(25%); } - span[class^='icon-'].inverse { - -webkit-filter: invert(100%); - filter: invert(100%); } - -span.icon-alert { - background-image: url("data:image/svg+xml,%3Csvg xmlns='http://www.w3.org/2000/svg' width='24' height='24' viewBox='0 0 24 24' fill='none' stroke='%2303234b' stroke-width='2' stroke-linecap='round' stroke-linejoin='round'%3E%3Ccircle cx='12' cy='12' r='10'%3E%3C/circle%3E%3Cline x1='12' y1='8' x2='12' y2='12'%3E%3C/line%3E%3Cline x1='12' y1='16' x2='12' y2='16'%3E%3C/line%3E%3C/svg%3E"); } -span.icon-bookmark { - background-image: url("data:image/svg+xml,%3Csvg xmlns='http://www.w3.org/2000/svg' width='24' height='24' viewBox='0 0 24 24' fill='none' stroke='%2303234b' stroke-width='2' stroke-linecap='round' stroke-linejoin='round'%3E%3Cpath d='M19 21l-7-5-7 5V5a2 2 0 0 1 2-2h10a2 2 0 0 1 2 2z'%3E%3C/path%3E%3C/svg%3E"); } -span.icon-calendar { - background-image: url("data:image/svg+xml,%3Csvg xmlns='http://www.w3.org/2000/svg' width='24' height='24' viewBox='0 0 24 24' fill='none' stroke='%2303234b' stroke-width='2' stroke-linecap='round' stroke-linejoin='round'%3E%3Crect x='3' y='4' width='18' height='18' rx='2' ry='2'%3E%3C/rect%3E%3Cline x1='16' y1='2' x2='16' y2='6'%3E%3C/line%3E%3Cline x1='8' y1='2' x2='8' y2='6'%3E%3C/line%3E%3Cline x1='3' y1='10' x2='21' y2='10'%3E%3C/line%3E%3C/svg%3E"); } -span.icon-credit { - background-image: url("data:image/svg+xml,%3Csvg xmlns='http://www.w3.org/2000/svg' width='24' height='24' viewBox='0 0 24 24' fill='none' stroke='%2303234b' stroke-width='2' stroke-linecap='round' stroke-linejoin='round'%3E%3Crect x='1' y='4' width='22' height='16' rx='2' ry='2'%3E%3C/rect%3E%3Cline x1='1' y1='10' x2='23' y2='10'%3E%3C/line%3E%3C/svg%3E"); } -span.icon-edit { - background-image: url("data:image/svg+xml,%3Csvg xmlns='http://www.w3.org/2000/svg' width='24' height='24' viewBox='0 0 24 24' fill='none' stroke='%2303234b' stroke-width='2' stroke-linecap='round' stroke-linejoin='round'%3E%3Cpath d='M20 14.66V20a2 2 0 0 1-2 2H4a2 2 0 0 1-2-2V6a2 2 0 0 1 2-2h5.34'%3E%3C/path%3E%3Cpolygon points='18 2 22 6 12 16 8 16 8 12 18 2'%3E%3C/polygon%3E%3C/svg%3E"); } -span.icon-link { - background-image: url("data:image/svg+xml,%3Csvg xmlns='http://www.w3.org/2000/svg' width='24' height='24' viewBox='0 0 24 24' fill='none' stroke='%2303234b' stroke-width='2' stroke-linecap='round' stroke-linejoin='round'%3E%3Cpath d='M18 13v6a2 2 0 0 1-2 2H5a2 2 0 0 1-2-2V8a2 2 0 0 1 2-2h6'%3E%3C/path%3E%3Cpolyline points='15 3 21 3 21 9'%3E%3C/polyline%3E%3Cline x1='10' y1='14' x2='21' y2='3'%3E%3C/line%3E%3C/svg%3E"); } -span.icon-help { - background-image: url("data:image/svg+xml,%3Csvg xmlns='http://www.w3.org/2000/svg' width='24' height='24' viewBox='0 0 24 24' fill='none' stroke='%2303234b' stroke-width='2' stroke-linecap='round' stroke-linejoin='round'%3E%3Cpath d='M9.09 9a3 3 0 0 1 5.83 1c0 2-3 3-3 3'%3E%3C/path%3E%3Ccircle cx='12' cy='12' r='10'%3E%3C/circle%3E%3Cline x1='12' y1='17' x2='12' y2='17'%3E%3C/line%3E%3C/svg%3E"); } -span.icon-home { - background-image: url("data:image/svg+xml,%3Csvg xmlns='http://www.w3.org/2000/svg' width='24' height='24' viewBox='0 0 24 24' fill='none' stroke='%2303234b' stroke-width='2' stroke-linecap='round' stroke-linejoin='round'%3E%3Cpath d='M3 9l9-7 9 7v11a2 2 0 0 1-2 2H5a2 2 0 0 1-2-2z'%3E%3C/path%3E%3Cpolyline points='9 22 9 12 15 12 15 22'%3E%3C/polyline%3E%3C/svg%3E"); } -span.icon-info { - background-image: url("data:image/svg+xml,%3Csvg xmlns='http://www.w3.org/2000/svg' width='24' height='24' viewBox='0 0 24 24' fill='none' stroke='%2303234b' stroke-width='2' stroke-linecap='round' stroke-linejoin='round'%3E%3Ccircle cx='12' cy='12' r='10'%3E%3C/circle%3E%3Cline x1='12' y1='16' x2='12' y2='12'%3E%3C/line%3E%3Cline x1='12' y1='8' x2='12' y2='8'%3E%3C/line%3E%3C/svg%3E"); } -span.icon-lock { - background-image: url("data:image/svg+xml,%3Csvg xmlns='http://www.w3.org/2000/svg' width='24' height='24' viewBox='0 0 24 24' fill='none' stroke='%2303234b' stroke-width='2' stroke-linecap='round' stroke-linejoin='round'%3E%3Crect x='3' y='11' width='18' height='11' rx='2' ry='2'%3E%3C/rect%3E%3Cpath d='M7 11V7a5 5 0 0 1 10 0v4'%3E%3C/path%3E%3C/svg%3E"); } -span.icon-mail { - background-image: url("data:image/svg+xml,%3Csvg xmlns='http://www.w3.org/2000/svg' width='24' height='24' viewBox='0 0 24 24' fill='none' stroke='%2303234b' stroke-width='2' stroke-linecap='round' stroke-linejoin='round'%3E%3Cpath d='M4 4h16c1.1 0 2 .9 2 2v12c0 1.1-.9 2-2 2H4c-1.1 0-2-.9-2-2V6c0-1.1.9-2 2-2z'%3E%3C/path%3E%3Cpolyline points='22,6 12,13 2,6'%3E%3C/polyline%3E%3C/svg%3E"); } -span.icon-location { - background-image: url("data:image/svg+xml,%3Csvg xmlns='http://www.w3.org/2000/svg' width='24' height='24' viewBox='0 0 24 24' fill='none' stroke='%2303234b' stroke-width='2' stroke-linecap='round' stroke-linejoin='round'%3E%3Cpath d='M21 10c0 7-9 13-9 13s-9-6-9-13a9 9 0 0 1 18 0z'%3E%3C/path%3E%3Ccircle cx='12' cy='10' r='3'%3E%3C/circle%3E%3C/svg%3E"); } -span.icon-phone { - background-image: url("data:image/svg+xml,%3Csvg xmlns='http://www.w3.org/2000/svg' width='24' height='24' viewBox='0 0 24 24' fill='none' stroke='%2303234b' stroke-width='2' stroke-linecap='round' stroke-linejoin='round'%3E%3Cpath d='M22 16.92v3a2 2 0 0 1-2.18 2 19.79 19.79 0 0 1-8.63-3.07 19.5 19.5 0 0 1-6-6 19.79 19.79 0 0 1-3.07-8.67A2 2 0 0 1 4.11 2h3a2 2 0 0 1 2 1.72 12.84 12.84 0 0 0 .7 2.81 2 2 0 0 1-.45 2.11L8.09 9.91a16 16 0 0 0 6 6l1.27-1.27a2 2 0 0 1 2.11-.45 12.84 12.84 0 0 0 2.81.7A2 2 0 0 1 22 16.92z'%3E%3C/path%3E%3C/svg%3E"); } -span.icon-rss { - background-image: url("data:image/svg+xml,%3Csvg xmlns='http://www.w3.org/2000/svg' width='24' height='24' viewBox='0 0 24 24' fill='none' stroke='%2303234b' stroke-width='2' stroke-linecap='round' stroke-linejoin='round'%3E%3Cpath d='M4 11a9 9 0 0 1 9 9'%3E%3C/path%3E%3Cpath d='M4 4a16 16 0 0 1 16 16'%3E%3C/path%3E%3Ccircle cx='5' cy='19' r='1'%3E%3C/circle%3E%3C/svg%3E"); } -span.icon-search { - background-image: url("data:image/svg+xml,%3Csvg xmlns='http://www.w3.org/2000/svg' width='24' height='24' viewBox='0 0 24 24' fill='none' stroke='%2303234b' stroke-width='2' stroke-linecap='round' stroke-linejoin='round'%3E%3Ccircle cx='11' cy='11' r='8'%3E%3C/circle%3E%3Cline x1='21' y1='21' x2='16.65' y2='16.65'%3E%3C/line%3E%3C/svg%3E"); } -span.icon-settings { - background-image: url("data:image/svg+xml,%3Csvg xmlns='http://www.w3.org/2000/svg' width='24' height='24' viewBox='0 0 24 24' fill='none' stroke='%2303234b' stroke-width='2' stroke-linecap='round' stroke-linejoin='round'%3E%3Ccircle cx='12' cy='12' r='3'%3E%3C/circle%3E%3Cpath d='M19.4 15a1.65 1.65 0 0 0 .33 1.82l.06.06a2 2 0 0 1 0 2.83 2 2 0 0 1-2.83 0l-.06-.06a1.65 1.65 0 0 0-1.82-.33 1.65 1.65 0 0 0-1 1.51V21a2 2 0 0 1-2 2 2 2 0 0 1-2-2v-.09A1.65 1.65 0 0 0 9 19.4a1.65 1.65 0 0 0-1.82.33l-.06.06a2 2 0 0 1-2.83 0 2 2 0 0 1 0-2.83l.06-.06a1.65 1.65 0 0 0 .33-1.82 1.65 1.65 0 0 0-1.51-1H3a2 2 0 0 1-2-2 2 2 0 0 1 2-2h.09A1.65 1.65 0 0 0 4.6 9a1.65 1.65 0 0 0-.33-1.82l-.06-.06a2 2 0 0 1 0-2.83 2 2 0 0 1 2.83 0l.06.06a1.65 1.65 0 0 0 1.82.33H9a1.65 1.65 0 0 0 1-1.51V3a2 2 0 0 1 2-2 2 2 0 0 1 2 2v.09a1.65 1.65 0 0 0 1 1.51 1.65 1.65 0 0 0 1.82-.33l.06-.06a2 2 0 0 1 2.83 0 2 2 0 0 1 0 2.83l-.06.06a1.65 1.65 0 0 0-.33 1.82V9a1.65 1.65 0 0 0 1.51 1H21a2 2 0 0 1 2 2 2 2 0 0 1-2 2h-.09a1.65 1.65 0 0 0-1.51 1z'%3E%3C/path%3E%3C/svg%3E"); } -span.icon-share { - background-image: url("data:image/svg+xml,%3Csvg xmlns='http://www.w3.org/2000/svg' width='24' height='24' viewBox='0 0 24 24' fill='none' stroke='%2303234b' stroke-width='2' stroke-linecap='round' stroke-linejoin='round'%3E%3Ccircle cx='18' cy='5' r='3'%3E%3C/circle%3E%3Ccircle cx='6' cy='12' r='3'%3E%3C/circle%3E%3Ccircle cx='18' cy='19' r='3'%3E%3C/circle%3E%3Cline x1='8.59' y1='13.51' x2='15.42' y2='17.49'%3E%3C/line%3E%3Cline x1='15.41' y1='6.51' x2='8.59' y2='10.49'%3E%3C/line%3E%3C/svg%3E"); } -span.icon-cart { - background-image: url("data:image/svg+xml,%3Csvg xmlns='http://www.w3.org/2000/svg' width='24' height='24' viewBox='0 0 24 24' fill='none' stroke='%2303234b' stroke-width='2' stroke-linecap='round' stroke-linejoin='round'%3E%3Ccircle cx='9' cy='21' r='1'%3E%3C/circle%3E%3Ccircle cx='20' cy='21' r='1'%3E%3C/circle%3E%3Cpath d='M1 1h4l2.68 13.39a2 2 0 0 0 2 1.61h9.72a2 2 0 0 0 2-1.61L23 6H6'%3E%3C/path%3E%3C/svg%3E"); } -span.icon-upload { - background-image: url("data:image/svg+xml,%3Csvg xmlns='http://www.w3.org/2000/svg' width='24' height='24' viewBox='0 0 24 24' fill='none' stroke='%2303234b' stroke-width='2' stroke-linecap='round' stroke-linejoin='round'%3E%3Cpath d='M21 15v4a2 2 0 0 1-2 2H5a2 2 0 0 1-2-2v-4'%3E%3C/path%3E%3Cpolyline points='17 8 12 3 7 8'%3E%3C/polyline%3E%3Cline x1='12' y1='3' x2='12' y2='15'%3E%3C/line%3E%3C/svg%3E"); } -span.icon-user { - background-image: url("data:image/svg+xml,%3Csvg xmlns='http://www.w3.org/2000/svg' width='24' height='24' viewBox='0 0 24 24' fill='none' stroke='%2303234b' stroke-width='2' stroke-linecap='round' stroke-linejoin='round'%3E%3Cpath d='M20 21v-2a4 4 0 0 0-4-4H8a4 4 0 0 0-4 4v2'%3E%3C/path%3E%3Ccircle cx='12' cy='7' r='4'%3E%3C/circle%3E%3C/svg%3E"); } - -/* - Definitions for utilities and helper classes. -*/ -/* Utility module CSS variable definitions */ -:root { - --generic-border-color: rgba(0, 0, 0, 0.3); - --generic-box-shadow: 0 0.2857142857rem 0.2857142857rem 0 rgba(0, 0, 0, 0.125), 0 0.1428571429rem 0.1428571429rem -0.1428571429rem rgba(0, 0, 0, 0.125); } - -.hidden { - display: none !important; } - -.visually-hidden { - position: absolute !important; - width: 1px !important; - height: 1px !important; - margin: -1px !important; - border: 0 !important; - padding: 0 !important; - clip: rect(0 0 0 0) !important; - -webkit-clip-path: inset(100%) !important; - clip-path: inset(100%) !important; - overflow: hidden !important; } - -.bordered { - border: 0.0714285714rem solid var(--generic-border-color) !important; } - -.rounded { - border-radius: var(--universal-border-radius) !important; } - -.circular { - border-radius: 50% !important; } - -.shadowed { - box-shadow: var(--generic-box-shadow) !important; } - -.responsive-margin { - margin: calc(var(--universal-margin) / 4) !important; } - @media screen and (min-width: 500px) { - .responsive-margin { - margin: calc(var(--universal-margin) / 2) !important; } } - @media screen and (min-width: 1280px) { - .responsive-margin { - margin: var(--universal-margin) !important; } } - -.responsive-padding { - padding: calc(var(--universal-padding) / 4) !important; } - @media screen and (min-width: 500px) { - .responsive-padding { - padding: calc(var(--universal-padding) / 2) !important; } } - @media screen and (min-width: 1280px) { - .responsive-padding { - padding: var(--universal-padding) !important; } } - -@media screen and (max-width: 499px) { - .hidden-sm { - display: none !important; } } -@media screen and (min-width: 500px) and (max-width: 1279px) { - .hidden-md { - display: none !important; } } -@media screen and (min-width: 1280px) { - .hidden-lg { - display: none !important; } } -@media screen and (max-width: 499px) { - .visually-hidden-sm { - position: absolute !important; - width: 1px !important; - height: 1px !important; - margin: -1px !important; - border: 0 !important; - padding: 0 !important; - clip: rect(0 0 0 0) !important; - -webkit-clip-path: inset(100%) !important; - clip-path: inset(100%) !important; - overflow: hidden !important; } } -@media screen and (min-width: 500px) and (max-width: 1279px) { - .visually-hidden-md { - position: absolute !important; - width: 1px !important; - height: 1px !important; - margin: -1px !important; - border: 0 !important; - padding: 0 !important; - clip: rect(0 0 0 0) !important; - -webkit-clip-path: inset(100%) !important; - clip-path: inset(100%) !important; - overflow: hidden !important; } } -@media screen and (min-width: 1280px) { - .visually-hidden-lg { - position: absolute !important; - width: 1px !important; - height: 1px !important; - margin: -1px !important; - border: 0 !important; - padding: 0 !important; - clip: rect(0 0 0 0) !important; - -webkit-clip-path: inset(100%) !important; - clip-path: inset(100%) !important; - overflow: hidden !important; } } - -/*# sourceMappingURL=mini-custom.css.map */ - -img[alt="ST logo"] { display: block; margin: auto; width: 75%; max-width: 250px; min-width: 71px; } -img[alt="Cube logo"] { float: right; width: 30%; max-width: 10rem; min-width: 8rem; padding-right: 1rem;} - -.figure { - display: block; - margin-left: auto; - margin-right: auto; - text-align: center; -} diff --git a/hw/bsp/stm32n6/boards/stm32n657nucleo/tcpp0203/_htmresc/st_logo_2020.png b/hw/bsp/stm32n6/boards/stm32n657nucleo/tcpp0203/_htmresc/st_logo_2020.png deleted file mode 100644 index d6cebb5ac..000000000 Binary files a/hw/bsp/stm32n6/boards/stm32n657nucleo/tcpp0203/_htmresc/st_logo_2020.png and /dev/null differ diff --git a/hw/bsp/stm32n6/boards/stm32n657nucleo/tcpp0203/tcpp0203.c b/hw/bsp/stm32n6/boards/stm32n657nucleo/tcpp0203/tcpp0203.c deleted file mode 100644 index 952ff16c9..000000000 --- a/hw/bsp/stm32n6/boards/stm32n657nucleo/tcpp0203/tcpp0203.c +++ /dev/null @@ -1,886 +0,0 @@ -/** - ****************************************************************************** - * @file tcpp0203.c - * @author MCD Application Team - * @brief This file provides the TCPP02/03 Type-C port protection driver. - ****************************************************************************** - * @attention - * - * Copyright (c) 2021 STMicroelectronics. - * All rights reserved. - * - * This software is licensed under terms that can be found in the LICENSE file - * in the root directory of this software component. - * If no LICENSE file comes with this software, it is provided AS-IS. - * - ****************************************************************************** - */ - -/* Includes ------------------------------------------------------------------*/ -#include "tcpp0203.h" - -#if defined(_TRACE) -#include "usbpd_core.h" -#include "usbpd_trace.h" -#include "string.h" -#include "stdio.h" -#endif /* _TRACE */ - -/** @addtogroup BSP - * @{ - */ - -/** @addtogroup Components - * @{ - */ - -/** @addtogroup TCPP0203 - * @brief This file provides a set of functions needed to drive the - * TCPP02/03 Type-C port protection. - * @{ - */ - -/** @defgroup TCPP0203_Private_Constants Private Constants - * @{ - */ - -/* Compilation option in order to enable/disable a concistency check performed - after each I2C access into TCPP0203 registers : goal is to check that written value in Reg0 - is properly reflected into reg1 register content. - To enable register consistency check, please uncomment below definition. - To disable it, comment below line */ -/* #define TCPP0203_REGISTER_CONSISTENCY_CHECK */ - -/** @defgroup TCPP0203_Private_Types Private Types - * @{ - */ -/* TCPP02/03 Type-C port protection driver structure initialization */ -TCPP0203_Drv_t TCPP0203_Driver = -{ - TCPP0203_Init, - TCPP0203_DeInit, - TCPP0203_Reset, - TCPP0203_SetVConnSwitch, - TCPP0203_SetGateDriverProvider, - TCPP0203_SetGateDriverConsumer, - TCPP0203_SetPowerMode, - TCPP0203_SetVBusDischarge, - TCPP0203_SetVConnDischarge, - TCPP0203_GetVConnSwitchAck, - TCPP0203_GetGateDriverProviderAck, - TCPP0203_GetGateDriverConsumerAck, - TCPP0203_GetPowerModeAck, - TCPP0203_GetVBusDischargeAck, - TCPP0203_GetVConnDischargeAck, - TCPP0203_GetOCPVConnFlag, - TCPP0203_GetOCPVBusFlag, - TCPP0203_GetOVPVBusFlag, - TCPP0203_GetOVPCCFlag, - TCPP0203_GetOTPFlag, - TCPP0203_GetVBusOkFlag, - TCPP0203_ReadTCPPType, - TCPP0203_ReadVCONNPower, - TCPP0203_WriteCtrlRegister, - TCPP0203_ReadAckRegister, - TCPP0203_ReadFlagRegister, -}; - -/** - * @} - */ - -/** @defgroup TCPP0203_Private_Variables Private Variables - * @{ - */ -static uint8_t TCPP0203_DeviceType = TCPP0203_DEVICE_TYPE_03; - -#if defined(TCPP0203_REGISTER_CONSISTENCY_CHECK) -static uint8_t Reg0_Expected_Value = 0x00; -static uint8_t Reg1_LastRead_Value = 0x00; -#endif /* TCPP0203_REGISTER_CONSISTENCY_CHECK */ - -/** - * @} - */ - -/* Private function prototypes -----------------------------------------------*/ - -/** @defgroup TCPP0203_Private_Function_Prototypes TCPP0203 Private Function Prototypes - * @{ - */ -static int32_t TCPP0203_ReadRegWrap(const void *handle, uint8_t Reg, uint8_t *Data, uint8_t Length); -static int32_t TCPP0203_WriteRegWrap(const void *handle, uint8_t Reg, uint8_t *Data, uint8_t Length); - -static int32_t TCPP0203_ModifyReg0(TCPP0203_Object_t *pObj, uint8_t Value, uint8_t Mask); - -#if defined(TCPP0203_REGISTER_CONSISTENCY_CHECK) -static int32_t TCPP0203_CheckReg0Reg1(TCPP0203_Object_t *pObj, uint8_t Reg0ExpectedValue); -#endif /* TCPP0203_REGISTER_CONSISTENCY_CHECK */ - -/** - * @} - */ - -/** @defgroup TCPP0203_Exported_Functions TCPP0203 Exported Functions - * @{ - */ - -/** - * @brief Register Bus Io to component - * @param Component object pointer - * @retval Status of execution - */ -int32_t TCPP0203_RegisterBusIO(TCPP0203_Object_t *pObj, TCPP0203_IO_t *pIO) -{ - int32_t ret; - - if (pObj == NULL) - { - ret = TCPP0203_ERROR; - } - else - { - pObj->IO.Init = pIO->Init; - pObj->IO.DeInit = pIO->DeInit; - pObj->IO.Address = pIO->Address; - pObj->IO.WriteReg = pIO->WriteReg; - pObj->IO.ReadReg = pIO->ReadReg; - pObj->IO.GetTick = pIO->GetTick; - - pObj->Ctx.ReadReg = TCPP0203_ReadRegWrap; - pObj->Ctx.WriteReg = TCPP0203_WriteRegWrap; - pObj->Ctx.handle = pObj; - - if (pObj->IO.Init != NULL) - { - ret = pObj->IO.Init(); - } - else - { - ret = TCPP0203_ERROR; - } - } - - return ret; -} - -/** - * @brief Initializes the TCPP0203 interface - * @param pObj Pointer to component object - * @retval Component status (TCPP0203_OK / TCPP0203_ERROR) - */ -int32_t TCPP0203_Init(TCPP0203_Object_t *pObj) -{ - int32_t ret = 0; - uint8_t tmp; - - if (pObj->IsInitialized == 0U) - { - /* Read TCPP Device type */ - ret += tcpp0203_read_reg(&pObj->Ctx, TCPP0203_READ_REG2, &tmp, 1); - - if (ret == TCPP0203_OK) - { - TCPP0203_DeviceType = (tmp & TCPP0203_DEVICE_TYPE_MSK); - } - else - { - TCPP0203_DeviceType = TCPP0203_DEVICE_TYPE_02; - } - pObj->IsInitialized = 1U; - } - - if (ret != TCPP0203_OK) - { - ret = TCPP0203_ERROR; - } - - return ret; -} - -/** - * @brief Deinitializes the TCPP0203 interface - * @param pObj Pointer to component object - * @retval Component status (TCPP0203_OK / TCPP0203_ERROR) - */ -int32_t TCPP0203_DeInit(TCPP0203_Object_t *pObj) -{ - if (pObj->IsInitialized == 1U) - { - /* De-Initialize IO BUS layer */ - pObj->IO.DeInit(); - - pObj->IsInitialized = 0U; - } - - return TCPP0203_OK; -} - -/** - * @brief Resets TCPP0203 register (Reg0) - * @param pObj Pointer to component object - * @retval Component status (TCPP0203_OK / TCPP0203_ERROR) - */ -int32_t TCPP0203_Reset(TCPP0203_Object_t *pObj) -{ - int32_t ret = TCPP0203_OK; - uint8_t tmp = TCPP0203_REG0_RST_VALUE; - - /* Write reset values in Reg0 register */ - if (tcpp0203_write_reg(&pObj->Ctx, TCPP0203_PROG_CTRL, &tmp, 1) != TCPP0203_OK) - { - ret = TCPP0203_ERROR; - } - -#if defined(TCPP0203_REGISTER_CONSISTENCY_CHECK) - Reg0_Expected_Value = TCPP0203_REG0_RST_VALUE; - Reg1_LastRead_Value = TCPP0203_REG0_RST_VALUE; -#endif /* TCPP0203_REGISTER_CONSISTENCY_CHECK */ - - return ret; -} - -/** - * @brief Configure TCPP0203 VConn Switch - * @param pObj Pointer to component object - * @param VConnSwitch VConn Switch requested setting - * This parameter can be one of the following values: - * @arg TCPP0203_VCONN_SWITCH_OPEN VConn switch open - * @arg TCPP0203_VCONN_SWITCH_CC1 VConn closed on CC1 - * @arg TCPP0203_VCONN_SWITCH_CC2 VConn closed on CC2 - * @retval Component status - */ -int32_t TCPP0203_SetVConnSwitch(TCPP0203_Object_t *pObj, uint8_t VConnSwitch) -{ - int32_t ret = TCPP0203_OK; - - if ((VConnSwitch != TCPP0203_VCONN_SWITCH_OPEN) - && (VConnSwitch != TCPP0203_VCONN_SWITCH_CC1) - && (VConnSwitch != TCPP0203_VCONN_SWITCH_CC2)) - { - ret = TCPP0203_ERROR; - } - else - { - /* Update VConn switch setting in Writing register Reg0 */ - ret += TCPP0203_ModifyReg0(pObj, VConnSwitch, TCPP0203_VCONN_SWITCH_MSK); - } - - return ret; -} - -/** - * @brief Configure TCPP0203 Gate Driver for Provider path - * @param pObj Pointer to component object - * @param GateDriverProvider GDP switch load requested setting - * This parameter can be one of the following values: - * @arg TCPP0203_GD_PROVIDER_SWITCH_OPEN GDP Switch Load Open - * @arg TCPP0203_GD_PROVIDER_SWITCH_CLOSED GDP Switch Load closed - * @retval Component status - */ -int32_t TCPP0203_SetGateDriverProvider(TCPP0203_Object_t *pObj, uint8_t GateDriverProvider) -{ - int32_t ret = TCPP0203_OK; - - if ((GateDriverProvider != TCPP0203_GD_PROVIDER_SWITCH_OPEN) - && (GateDriverProvider != TCPP0203_GD_PROVIDER_SWITCH_CLOSED)) - { - ret = TCPP0203_ERROR; - } - else - { - /* Update GDP Switch Load setting in Writing register Reg0 */ - if (GateDriverProvider == TCPP0203_GD_PROVIDER_SWITCH_CLOSED) - { - /* If Gate Driver Provider is to be closed, Gate Driver Consumer should be open */ - ret += TCPP0203_ModifyReg0(pObj, (GateDriverProvider | TCPP0203_GD_CONSUMER_SWITCH_OPEN), - (TCPP0203_GD_PROVIDER_SWITCH_MSK | TCPP0203_GD_CONSUMER_SWITCH_MSK)); - } - else - { - ret += TCPP0203_ModifyReg0(pObj, GateDriverProvider, TCPP0203_GD_PROVIDER_SWITCH_MSK); - } - } - - return ret; -} - -/** - * @brief Configure TCPP0203 Gate Driver for Consumer path - * @param pObj Pointer to component object - * @param GateDriverConsumer GDC switch load requested setting - * This parameter can be one of the following values: - * @arg TCPP0203_GD_CONSUMER_SWITCH_OPEN GDC Switch Load Open - * @arg TCPP0203_GD_CONSUMER_SWITCH_CLOSED GDC Switch Load closed - * @retval Component status - */ -int32_t TCPP0203_SetGateDriverConsumer(TCPP0203_Object_t *pObj, uint8_t GateDriverConsumer) -{ - int32_t ret = TCPP0203_OK; - - /* Check if TCPP type is TCPP03. Otherwise, return error */ - if (TCPP0203_DeviceType != TCPP0203_DEVICE_TYPE_03) - { - return (TCPP0203_ERROR); - } - - if ((GateDriverConsumer != TCPP0203_GD_CONSUMER_SWITCH_OPEN) - && (GateDriverConsumer != TCPP0203_GD_CONSUMER_SWITCH_CLOSED)) - { - ret = TCPP0203_ERROR; - } - else - { - /* Update GDC Switch Load setting in Writing register Reg0 */ - if (GateDriverConsumer == TCPP0203_GD_CONSUMER_SWITCH_CLOSED) - { - /* If Gate Driver Consumer is to be closed, Gate Driver Provider should be open */ - ret += TCPP0203_ModifyReg0(pObj, (GateDriverConsumer | TCPP0203_GD_PROVIDER_SWITCH_OPEN), - (TCPP0203_GD_PROVIDER_SWITCH_MSK | TCPP0203_GD_CONSUMER_SWITCH_MSK)); - } - else - { - ret += TCPP0203_ModifyReg0(pObj, GateDriverConsumer, TCPP0203_GD_CONSUMER_SWITCH_MSK); - } - } - - return ret; -} - -/** - * @brief Configure TCPP0203 Power Mode - * @param pObj Pointer to component object - * @param PowerMode Power mode requested setting - * This parameter can be one of the following values: - * @arg TCPP0203_POWER_MODE_HIBERNATE Hibernate - * @arg TCPP0203_POWER_MODE_LOWPOWER Low Power - * @arg TCPP0203_POWER_MODE_NORMAL Normal - * @retval Component status - */ -int32_t TCPP0203_SetPowerMode(TCPP0203_Object_t *pObj, uint8_t PowerMode) -{ - int32_t ret = TCPP0203_OK; - - if ((PowerMode != TCPP0203_POWER_MODE_HIBERNATE) - && (PowerMode != TCPP0203_POWER_MODE_LOWPOWER) - && (PowerMode != TCPP0203_POWER_MODE_NORMAL)) - { - ret = TCPP0203_ERROR; - } - else - { - /* Update Power Mode setting in Writing register Reg0 */ - ret += TCPP0203_ModifyReg0(pObj, PowerMode, TCPP0203_POWER_MODE_MSK); - } - - return ret; -} - -/** - * @brief Configure TCPP0203 Gate Driver for Provider path - * @param pObj Pointer to component object - * @param VBusDischarge VBUS Discharge requested setting - * This parameter can be one of the following values: - * @arg TCPP0203_VBUS_DISCHARGE_OFF VBUS Discharge Off - * @arg TCPP0203_VBUS_DISCHARGE_ON VBUS Discharge On - * @retval Component status - */ -int32_t TCPP0203_SetVBusDischarge(TCPP0203_Object_t *pObj, uint8_t VBusDischarge) -{ - int32_t ret = TCPP0203_OK; - - if ((VBusDischarge != TCPP0203_VBUS_DISCHARGE_OFF) - && (VBusDischarge != TCPP0203_VBUS_DISCHARGE_ON)) - { - ret = TCPP0203_ERROR; - } - else - { - /* Update VBUS Discharge setting in Writing register Reg0 */ - ret += TCPP0203_ModifyReg0(pObj, VBusDischarge, TCPP0203_VBUS_DISCHARGE_MSK); - } - - return ret; -} - -/** - * @brief Configure TCPP0203 Gate Driver for Provider path - * @param pObj Pointer to component object - * @param VConnDischarge GDP switch load requested setting - * This parameter can be one of the following values: - * @arg TCPP0203_VCONN_DISCHARGE_OFF VConn Discharge Off - * @arg TCPP0203_VCONN_DISCHARGE_ON VConn Discharge On - * @retval Component status - */ -int32_t TCPP0203_SetVConnDischarge(TCPP0203_Object_t *pObj, uint8_t VConnDischarge) -{ - int32_t ret = TCPP0203_OK; - - if ((VConnDischarge != TCPP0203_VCONN_DISCHARGE_OFF) - && (VConnDischarge != TCPP0203_VCONN_DISCHARGE_ON)) - { - ret = TCPP0203_ERROR; - } - else - { - /* Update VConn Discharge setting in Writing register Reg0 */ - ret += TCPP0203_ModifyReg0(pObj, VConnDischarge, TCPP0203_VCONN_DISCHARGE_MSK); - } - - return ret; -} - -/** - * @brief Get VConn switch Ack value - * @param pObj Pointer to component object - * @param pVConnSwitchAck Pointer on VConn switch Ack value - * This output parameter can be one of the following values: - * @arg TCPP0203_VCONN_SWITCH_OPEN VConn switch open Ack - * @arg TCPP0203_VCONN_SWITCH_CC1 VConn closed on CC1 Ack - * @arg TCPP0203_VCONN_SWITCH_CC2 VConn closed on CC2 Ack - * @retval Component status - */ -int32_t TCPP0203_GetVConnSwitchAck(TCPP0203_Object_t *pObj, uint8_t *pVConnSwitchAck) -{ - int32_t ret; - uint8_t tmp; - - ret = tcpp0203_read_reg(&pObj->Ctx, TCPP0203_ACK_REG, &tmp, 1); - *pVConnSwitchAck = (tmp & TCPP0203_VCONN_SWITCH_ACK_MSK); - - return ret; -} - -/** - * @brief Get Gate Driver Provider Ack value - * @param pObj Pointer to component object - * @param pGateDriverProviderAck Pointer on Gate Driver Provider Ack value - * This output parameter can be one of the following values: - * @arg TCPP0203_GD_PROVIDER_SWITCH_ACK_OPEN Gate Driver Provider Open Ack - * @arg TCPP0203_GD_PROVIDER_SWITCH_ACK_CLOSED Gate Driver Provider Closed Ack - * @retval Component status - */ -int32_t TCPP0203_GetGateDriverProviderAck(TCPP0203_Object_t *pObj, uint8_t *pGateDriverProviderAck) -{ - int32_t ret; - uint8_t tmp; - - ret = tcpp0203_read_reg(&pObj->Ctx, TCPP0203_ACK_REG, &tmp, 1); - *pGateDriverProviderAck = (tmp & TCPP0203_GD_PROVIDER_SWITCH_ACK_MSK); - - return ret; -} - -/** - * @brief Get Gate Driver Consumer Ack value - * @param pObj Pointer to component object - * @param pGateDriverConsumerAck Pointer on Gate Driver Consumer Ack value - * This output parameter can be one of the following values: - * @arg TCPP0203_GD_CONSUMER_SWITCH_ACK_OPEN Gate Driver Consumer Open Ack - * @arg TCPP0203_GD_CONSUMER_SWITCH_ACK_CLOSED Gate Driver Consumer Closed Ack - * @retval Component status - */ -int32_t TCPP0203_GetGateDriverConsumerAck(TCPP0203_Object_t *pObj, uint8_t *pGateDriverConsumerAck) -{ - int32_t ret; - uint8_t tmp; - - /* Check if TCPP type is TCPP03. Otherwise, return error */ - if (TCPP0203_DeviceType != TCPP0203_DEVICE_TYPE_03) - { - return (TCPP0203_ERROR); - } - - ret = tcpp0203_read_reg(&pObj->Ctx, TCPP0203_ACK_REG, &tmp, 1); - *pGateDriverConsumerAck = (tmp & TCPP0203_GD_CONSUMER_SWITCH_ACK_MSK); - - return ret; -} - -/** - * @brief Get Power Mode Ack value - * @param pObj Pointer to component object - * @param pPowerModeAck Pointer on Power Mode Ack value - * This output parameter can be one of the following values: - * @arg TCPP0203_POWER_MODE_ACK_HIBERNATE Power Mode Hibernate Ack - * @arg TCPP0203_POWER_MODE_ACK_LOWPOWER Power Mode Low Power Ack - * @arg TCPP0203_POWER_MODE_ACK_NORMAL Power Mode Normal Ack - * @retval Component status - */ -int32_t TCPP0203_GetPowerModeAck(TCPP0203_Object_t *pObj, uint8_t *pPowerModeAck) -{ - int32_t ret; - uint8_t tmp; - - ret = tcpp0203_read_reg(&pObj->Ctx, TCPP0203_ACK_REG, &tmp, 1); - *pPowerModeAck = (tmp & TCPP0203_POWER_MODE_ACK_MSK); - - return ret; -} - -/** - * @brief Get VBUS Discharge Ack value - * @param pObj Pointer to component object - * @param pVBusDischargeAck Pointer on VBUS Discharge Ack value - * This output parameter can be one of the following values: - * @arg TCPP0203_VBUS_DISCHARGE_ACK_OFF VBUS Discharge Off Ack - * @arg TCPP0203_VBUS_DISCHARGE_ACK_ON VBUS Discharge On Ack - * @retval Component status - */ -int32_t TCPP0203_GetVBusDischargeAck(TCPP0203_Object_t *pObj, uint8_t *pVBusDischargeAck) -{ - int32_t ret; - uint8_t tmp; - - ret = tcpp0203_read_reg(&pObj->Ctx, TCPP0203_ACK_REG, &tmp, 1); - *pVBusDischargeAck = (tmp & TCPP0203_VBUS_DISCHARGE_ACK_MSK); - - return ret; -} - -/** - * @brief Get VConn Discharge Ack value - * @param pObj Pointer to component object - * @param pVConnDischargeAck Pointer on VConn Discharge Ack value - * This output parameter can be one of the following values: - * @arg TCPP0203_VCONN_DISCHARGE_ACK_OFF VConn Discharge Off Ack - * @arg TCPP0203_VCONN_DISCHARGE_ACK_ON VConn Discharge On Ack - * @retval Component status - */ -int32_t TCPP0203_GetVConnDischargeAck(TCPP0203_Object_t *pObj, uint8_t *pVConnDischargeAck) -{ - int32_t ret; - uint8_t tmp; - - ret = tcpp0203_read_reg(&pObj->Ctx, TCPP0203_ACK_REG, &tmp, 1); - *pVConnDischargeAck = (tmp & TCPP0203_VCONN_DISCHARGE_ACK_MSK); - - return ret; -} - -/** - * @brief Get OCP VConn Flag value - * @param pObj Pointer to component object - * @param pOCPVConnFlag Pointer on OCP VConn Flag value - * This output parameter can be one of the following values: - * @arg TCPP0203_FLAG_OCP_VCONN_RESET OCP VConn flag not set - * @arg TCPP0203_FLAG_OCP_VCONN_SET OCP VConn flag set - * @retval Component status - */ -int32_t TCPP0203_GetOCPVConnFlag(TCPP0203_Object_t *pObj, uint8_t *pOCPVConnFlag) -{ - int32_t ret; - uint8_t tmp; - - ret = tcpp0203_read_reg(&pObj->Ctx, TCPP0203_FLAG_REG, &tmp, 1); - *pOCPVConnFlag = (tmp & TCPP0203_FLAG_OCP_VCONN_MSK); - - return ret; -} - -/** - * @brief Get OCP VBUS Flag value - * @param pObj Pointer to component object - * @param pGetOCPVBusFlag Pointer on OCP VBUS Flag value - * This output parameter can be one of the following values: - * @arg TCPP0203_FLAG_OCP_VBUS_RESET OCP VBUS flag not set - * @arg TCPP0203_FLAG_OCP_VBUS_SET OCP VBUS flag set - * @retval Component status - */ -int32_t TCPP0203_GetOCPVBusFlag(TCPP0203_Object_t *pObj, uint8_t *pGetOCPVBusFlag) -{ - int32_t ret; - uint8_t tmp; - - ret = tcpp0203_read_reg(&pObj->Ctx, TCPP0203_FLAG_REG, &tmp, 1); - *pGetOCPVBusFlag = (tmp & TCPP0203_FLAG_OCP_VBUS_MSK); - - return ret; -} - -/** - * @brief Get OVP VBUS Flag value - * @param pObj Pointer to component object - * @param pOVPVBusFlag Pointer on OVP VBUS Flag value - * This output parameter can be one of the following values: - * @arg TCPP0203_FLAG_OVP_VBUS_RESET OVP VBUS flag not set - * @arg TCPP0203_FLAG_OVP_VBUS_SET OVP VBUS flag set - * @retval Component status - */ -int32_t TCPP0203_GetOVPVBusFlag(TCPP0203_Object_t *pObj, uint8_t *pOVPVBusFlag) -{ - int32_t ret; - uint8_t tmp; - - ret = tcpp0203_read_reg(&pObj->Ctx, TCPP0203_FLAG_REG, &tmp, 1); - *pOVPVBusFlag = (tmp & TCPP0203_FLAG_OVP_VBUS_MSK); - - return ret; -} - -/** - * @brief Get OVP CC Flag value - * @param pObj Pointer to component object - * @param pOVPCCFlag Pointer on OVP CC Flag value - * This output parameter can be one of the following values: - * @arg TCPP0203_FLAG_OVP_CC_RESET OVP CC flag not set - * @arg TCPP0203_FLAG_OVP_CC_SET OVP CC flag set - * @retval Component status - */ -int32_t TCPP0203_GetOVPCCFlag(TCPP0203_Object_t *pObj, uint8_t *pOVPCCFlag) -{ - int32_t ret; - uint8_t tmp; - - ret = tcpp0203_read_reg(&pObj->Ctx, TCPP0203_FLAG_REG, &tmp, 1); - *pOVPCCFlag = (tmp & TCPP0203_FLAG_OVP_CC_MSK); - - return ret; -} - -/** - * @brief Get Over Temperature Flag value - * @param pObj Pointer to component object - * @param pOTPFlag Pointer on Over Temperature Flag value - * This output parameter can be one of the following values: - * @arg TCPP0203_FLAG_OTP_RESET Over Temperature flag not set - * @arg TCPP0203_FLAG_OTP_SET Over Temperature flag set - * @retval Component status - */ -int32_t TCPP0203_GetOTPFlag(TCPP0203_Object_t *pObj, uint8_t *pOTPFlag) -{ - int32_t ret; - uint8_t tmp; - - ret = tcpp0203_read_reg(&pObj->Ctx, TCPP0203_FLAG_REG, &tmp, 1); - *pOTPFlag = (tmp & TCPP0203_FLAG_OTP_MSK); - - return ret; -} - -/** - * @brief Get VBUS OK Flag value - * @param pObj Pointer to component object - * @param pVBusOkFlag Pointer on VBUS OK Flag value - * This output parameter can be one of the following values: - * @arg TCPP0203_FLAG_VBUS_OK_RESET VBUS OK flag not set - * @arg TCPP0203_FLAG_VBUS_OK_SET VBUS OK flag set - * @retval Component status - */ -int32_t TCPP0203_GetVBusOkFlag(TCPP0203_Object_t *pObj, uint8_t *pVBusOkFlag) -{ - int32_t ret; - uint8_t tmp; - - ret = tcpp0203_read_reg(&pObj->Ctx, TCPP0203_FLAG_REG, &tmp, 1); - *pVBusOkFlag = (tmp & TCPP0203_FLAG_VBUS_OK_MSK); - - return ret; -} - -/** - * @brief Get TCPP0203 Device Type value - * @param pObj Pointer to component object - * @param pTCPPType Pointer on TCPP0203 Device Type value - * This output parameter can be one of the following values: - * @arg TCPP0203_DEVICE_TYPE_02 TCPP02 Type - * @arg TCPP0203_DEVICE_TYPE_03 TCPP03 Type - * @retval Component status - */ -int32_t TCPP0203_ReadTCPPType(TCPP0203_Object_t *pObj, uint8_t *pTCPPType) -{ - int32_t ret; - uint8_t tmp; - - ret = tcpp0203_read_reg(&pObj->Ctx, TCPP0203_FLAG_REG, &tmp, 1); - *pTCPPType = (tmp & TCPP0203_DEVICE_TYPE_MSK); - - return ret; -} - -/** - * @brief Get VConn Power value - * @param pObj Pointer to component object - * @param pVCONNPower Pointer on VConn Power value - * This output parameter can be one of the following values: - * @arg TCPP0203_FLAG_VCONN_PWR_1W OCP VConn flag not set - * @arg TCPP0203_FLAG_VCONN_PWR_0_1W OCP VConn flag set - * @retval Component status - */ -int32_t TCPP0203_ReadVCONNPower(TCPP0203_Object_t *pObj, uint8_t *pVCONNPower) -{ - int32_t ret; - uint8_t tmp; - - ret = tcpp0203_read_reg(&pObj->Ctx, TCPP0203_FLAG_REG, &tmp, 1); - *pVCONNPower = (tmp & TCPP0203_FLAG_VCONN_PWR_MSK); - - return ret; -} - -/** - * @brief Set complete Ctrl register value (Reg 0) - * @param pObj Pointer to component object - * @param pCtrlRegister Pointer on Ctrl register value - * @retval Component status - */ -int32_t TCPP0203_WriteCtrlRegister(TCPP0203_Object_t *pObj, uint8_t *pCtrlRegister) -{ - int32_t ret; - - /* Update value in writing register (reg0) */ - ret = tcpp0203_write_reg(&pObj->Ctx, TCPP0203_PROG_CTRL, pCtrlRegister, 1); - -#if defined(TCPP0203_REGISTER_CONSISTENCY_CHECK) - Reg0_Expected_Value = *pCtrlRegister; -#endif /* TCPP0203_REGISTER_CONSISTENCY_CHECK */ - - return ret; -} - -/** - * @brief Get complete Ack register value - * @param pObj Pointer to component object - * @param pAckRegister Pointer on Ack register value - * @retval Component status - */ -int32_t TCPP0203_ReadAckRegister(TCPP0203_Object_t *pObj, uint8_t *pAckRegister) -{ - int32_t ret; - - ret = tcpp0203_read_reg(&pObj->Ctx, TCPP0203_ACK_REG, pAckRegister, 1); - - return ret; -} - -/** - * @brief Get complete Flag register value - * @param pObj Pointer to component object - * @param pFlagRegister Pointer on Flag register value - * @retval Component status - */ -int32_t TCPP0203_ReadFlagRegister(TCPP0203_Object_t *pObj, uint8_t *pFlagRegister) -{ - int32_t ret; - - ret = tcpp0203_read_reg(&pObj->Ctx, TCPP0203_FLAG_REG, pFlagRegister, 1); - - return ret; -} - -/******************** Static functions ****************************************/ -/** - * @brief Wrap TCPP0203 read function to Bus IO function - * @param handle Component object handle - * @param Reg Target register address to read - * @param pData Buffer where Target register value should be stored - * @param Length buffer size to be read - * @retval error status - */ -static int32_t TCPP0203_ReadRegWrap(const void *handle, uint8_t Reg, uint8_t *pData, uint8_t Length) -{ - const TCPP0203_Object_t *pObj = (const TCPP0203_Object_t *)handle; - - return pObj->IO.ReadReg(pObj->IO.Address, Reg, pData, Length); -} - -/** - * @brief Wrap TCPP0203 write function to Bus IO function - * @param handle Component object handle - * @param Reg Target register address to write - * @param pData Target register value to be written - * @param Length Buffer size to be written - * @retval error status - */ -static int32_t TCPP0203_WriteRegWrap(const void *handle, uint8_t Reg, uint8_t *pData, uint8_t Length) -{ - const TCPP0203_Object_t *pObj = (const TCPP0203_Object_t *)handle; - -#if defined(TCPP0203_REGISTER_CONSISTENCY_CHECK) - Reg0_Expected_Value = *pData; -#endif /* TCPP0203_REGISTER_CONSISTENCY_CHECK */ - - return pObj->IO.WriteReg(pObj->IO.Address, Reg, pData, Length); -} - -/** - * @brief TCPP0203 register update function to Bus IO function - * @param handle Component object handle - * @param Reg Target register address to write - * @param pData Target register value to be written - * @param Length Buffer size to be written - * @retval error status - */ -static int32_t TCPP0203_ModifyReg0(TCPP0203_Object_t *pObj, uint8_t Value, uint8_t Mask) -{ - int32_t ret; - uint8_t tmp; - - /* Read current content of ACK register (reflects content of bits set to 1 in Writing register Reg0) */ - ret = tcpp0203_read_reg(&pObj->Ctx, TCPP0203_ACK_REG, &tmp, 1); - - /* Update only the area dedicated to Mask */ - tmp &= ~(Mask); - tmp |= (Value & Mask); - -#if defined(TCPP0203_REGISTER_CONSISTENCY_CHECK) - Reg0_Expected_Value = tmp; -#endif /* TCPP0203_REGISTER_CONSISTENCY_CHECK */ - - /* Update value in writing register (reg0) */ - ret += tcpp0203_write_reg(&pObj->Ctx, TCPP0203_PROG_CTRL, &tmp, 1); - -#if defined(TCPP0203_REGISTER_CONSISTENCY_CHECK) - ret += TCPP0203_CheckReg0Reg1(pObj, Reg0_Expected_Value); -#endif /* TCPP0203_REGISTER_CONSISTENCY_CHECK */ - - return ret; -} - -#if defined(TCPP0203_REGISTER_CONSISTENCY_CHECK) -/** - * @brief TCPP0203 register control function between Reg0 and Reg1 value - * @param handle Component object handle - * @param Reg0ExpectedValue Value expected in Reg0 (built after all calls to write functions) - * @retval error status - */ -static int32_t TCPP0203_CheckReg0Reg1(TCPP0203_Object_t *pObj, uint8_t Reg0ExpectedValue) -{ - int32_t ret; - - /* Read current content of ACK register (expected to reflect content of bits set to 1 in Writing register Reg0) */ - ret = tcpp0203_read_reg(&pObj->Ctx, TCPP0203_ACK_REG, &Reg1_LastRead_Value, 1); - -#ifdef _TRACE - char str[12]; - sprintf(str, "Exp0_0x%02x", Reg0ExpectedValue); - USBPD_TRACE_Add(USBPD_TRACE_DEBUG, 0U, 0U, (uint8_t *)str, sizeof(str) - 1U); - sprintf(str, "Reg1_0x%02x", Reg1_LastRead_Value); - USBPD_TRACE_Add(USBPD_TRACE_DEBUG, 0U, 0U, (uint8_t *)str, sizeof(str) - 1U); -#endif /* _TRACE */ - - /* Control if Reg1 value is same as Reg0 expected one */ - if (Reg1_LastRead_Value != Reg0ExpectedValue) - { - while (1); - } - - return ret; -} -#endif /* TCPP0203_REGISTER_CONSISTENCY_CHECK */ - -/** - * @} - */ - -/** - * @} - */ - -/** - * @} - */ - -/** - * @} - */ diff --git a/hw/bsp/stm32n6/boards/stm32n657nucleo/tcpp0203/tcpp0203.h b/hw/bsp/stm32n6/boards/stm32n657nucleo/tcpp0203/tcpp0203.h deleted file mode 100644 index 271b534fc..000000000 --- a/hw/bsp/stm32n6/boards/stm32n657nucleo/tcpp0203/tcpp0203.h +++ /dev/null @@ -1,353 +0,0 @@ -/** - ****************************************************************************** - * @file tcpp0203.h - * @author MCD Application Team - * @brief This file contains all the functions prototypes for the - * tcpp0203.c driver. - ****************************************************************************** - * @attention - * - * Copyright (c) 2021 STMicroelectronics. - * All rights reserved. - * - * This software is licensed under terms that can be found in the LICENSE file - * in the root directory of this software component. - * If no LICENSE file comes with this software, it is provided AS-IS. - * - ****************************************************************************** - */ - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef TCPP0203_H -#define TCPP0203_H - -/* Includes ------------------------------------------------------------------*/ -#include "tcpp0203_reg.h" -#include - -/** @addtogroup BSP - * @{ - */ - -/** @addtogroup Component - * @{ - */ - -/** @addtogroup TCPP0203 - * @{ - */ - -/* Exported types ------------------------------------------------------------*/ - -/** @defgroup TCPP0203_Exported_Types TCPP0203 Exported Types - * @{ - */ -typedef int32_t (*TCPP0203_Init_Func)(void); -typedef int32_t (*TCPP0203_DeInit_Func)(void); -typedef int32_t (*TCPP0203_GetTick_Func)(void); -typedef int32_t (*TCPP0203_WriteReg_Func)(uint16_t, uint16_t, uint8_t *, uint16_t); -typedef int32_t (*TCPP0203_ReadReg_Func)(uint16_t, uint16_t, uint8_t *, uint16_t); - -typedef struct -{ - TCPP0203_Init_Func Init; - TCPP0203_DeInit_Func DeInit; - uint16_t Address; - TCPP0203_WriteReg_Func WriteReg; - TCPP0203_ReadReg_Func ReadReg; - TCPP0203_GetTick_Func GetTick; -} TCPP0203_IO_t; - - -typedef struct -{ - TCPP0203_IO_t IO; - TCPP0203_ctx_t Ctx; - uint8_t IsInitialized; -} TCPP0203_Object_t; - -typedef struct -{ - int32_t (*Init)(TCPP0203_Object_t *); - int32_t (*DeInit)(TCPP0203_Object_t *); - int32_t (*Reset)(TCPP0203_Object_t *); - int32_t (*SetVConnSwitch)(TCPP0203_Object_t *, uint8_t); - int32_t (*SetGateDriverProvider)(TCPP0203_Object_t *, uint8_t); - int32_t (*SetGateDriverConsumer)(TCPP0203_Object_t *, uint8_t); - int32_t (*SetPowerMode)(TCPP0203_Object_t *, uint8_t); - int32_t (*SetVBusDischarge)(TCPP0203_Object_t *, uint8_t); - int32_t (*SetVConnDischarge)(TCPP0203_Object_t *, uint8_t); - int32_t (*GetVConnSwitchAck)(TCPP0203_Object_t *, uint8_t *); - int32_t (*GetGateDriverProviderAck)(TCPP0203_Object_t *, uint8_t *); - int32_t (*GetGateDriverConsumerAck)(TCPP0203_Object_t *, uint8_t *); - int32_t (*GetPowerModeAck)(TCPP0203_Object_t *, uint8_t *); - int32_t (*GetVBusDischargeAck)(TCPP0203_Object_t *, uint8_t *); - int32_t (*GetVConnDischargeAck)(TCPP0203_Object_t *, uint8_t *); - int32_t (*GetOCPVConnFlag)(TCPP0203_Object_t *, uint8_t *); - int32_t (*GetOCPVBusFlag)(TCPP0203_Object_t *, uint8_t *); - int32_t (*GetOVPVBusFlag)(TCPP0203_Object_t *, uint8_t *); - int32_t (*GetOVPCCFlag)(TCPP0203_Object_t *, uint8_t *); - int32_t (*GetOTPFlag)(TCPP0203_Object_t *, uint8_t *); - int32_t (*GetVBusOkFlag)(TCPP0203_Object_t *, uint8_t *); - int32_t (*ReadTCPPType)(TCPP0203_Object_t *, uint8_t *); - int32_t (*ReadVCONNPower)(TCPP0203_Object_t *, uint8_t *); - int32_t (*WriteCtrlRegister)(TCPP0203_Object_t *, uint8_t *); - int32_t (*ReadAckRegister)(TCPP0203_Object_t *, uint8_t *); - int32_t (*ReadFlagRegister)(TCPP0203_Object_t *, uint8_t *); -} TCPP0203_Drv_t; - -/** - * @} - */ - -/** @defgroup TCPP0203_Exported_Constants TCPP0203 Exported Constants - * @{ - */ -/** - * @brief TCPP0203 Driver Response codes - */ -#define TCPP0203_OK (0) -#define TCPP0203_ERROR (-1) - -/** - * @brief TCPP0203 possible I2C Addresses - */ -#define TCPP0203_I2C_ADDRESS_X68 (0x68U) -#define TCPP0203_I2C_ADDRESS_X6A (0x6AU) - -/** - * @brief TCPP0203 Reg0 Reset Value - */ -#define TCPP0203_REG0_RST_VALUE TCPP0203_GD_CONSUMER_SWITCH_CLOSED - -/** - * @brief TCPP0203 VCONN Switch - */ -#define TCPP0203_VCONN_SWITCH_POS (0U) -#define TCPP0203_VCONN_SWITCH_MSK (0x03U << TCPP0203_VCONN_SWITCH_POS) -#define TCPP0203_VCONN_SWITCH_OPEN (0x00U) -#define TCPP0203_VCONN_SWITCH_CC1 (0x01U << TCPP0203_VCONN_SWITCH_POS) -#define TCPP0203_VCONN_SWITCH_CC2 (0x02U << TCPP0203_VCONN_SWITCH_POS) - -/** - * @brief TCPP0203 Gate Driver Provider values - */ -#define TCPP0203_GD_PROVIDER_SWITCH_POS (2U) -#define TCPP0203_GD_PROVIDER_SWITCH_MSK (0x01U << TCPP0203_GD_PROVIDER_SWITCH_POS) -#define TCPP0203_GD_PROVIDER_SWITCH_OPEN (0x00U) -#define TCPP0203_GD_PROVIDER_SWITCH_CLOSED (TCPP0203_GD_PROVIDER_SWITCH_MSK) - -/** - * @brief TCPP0203 Gate Driver Consumer values - */ -#define TCPP0203_GD_CONSUMER_SWITCH_POS (3U) -#define TCPP0203_GD_CONSUMER_SWITCH_MSK (0x01U << TCPP0203_GD_CONSUMER_SWITCH_POS) -#define TCPP0203_GD_CONSUMER_SWITCH_CLOSED (0x00U) -#define TCPP0203_GD_CONSUMER_SWITCH_OPEN (TCPP0203_GD_CONSUMER_SWITCH_MSK) - -/** - * @brief TCPP0203 Power Mode values - */ -#define TCPP0203_POWER_MODE_POS (4U) -#define TCPP0203_POWER_MODE_MSK (0x03U << TCPP0203_POWER_MODE_POS) -#define TCPP0203_POWER_MODE_HIBERNATE (0x00U) -#define TCPP0203_POWER_MODE_LOWPOWER (0x02U << TCPP0203_POWER_MODE_POS) -#define TCPP0203_POWER_MODE_NORMAL (0x01U << TCPP0203_POWER_MODE_POS) - -/** - * @brief TCPP0203 VBUS Discharge management - */ -#define TCPP0203_VBUS_DISCHARGE_POS (6U) -#define TCPP0203_VBUS_DISCHARGE_MSK (0x01U << TCPP0203_VBUS_DISCHARGE_POS) -#define TCPP0203_VBUS_DISCHARGE_OFF (0x00U) -#define TCPP0203_VBUS_DISCHARGE_ON (TCPP0203_VBUS_DISCHARGE_MSK) - -/** - * @brief TCPP0203 VConn Discharge management - */ -#define TCPP0203_VCONN_DISCHARGE_POS (7U) -#define TCPP0203_VCONN_DISCHARGE_MSK (0x01U << TCPP0203_VCONN_DISCHARGE_POS) -#define TCPP0203_VCONN_DISCHARGE_OFF (0x00U) -#define TCPP0203_VCONN_DISCHARGE_ON (TCPP0203_VCONN_DISCHARGE_MSK) - -/** - * @brief TCPP0203 VCONN Switch Acknowledge - */ -#define TCPP0203_VCONN_SWITCH_ACK_POS (0U) -#define TCPP0203_VCONN_SWITCH_ACK_MSK (0x03U << TCPP0203_VCONN_SWITCH_ACK_POS) -#define TCPP0203_VCONN_SWITCH_ACK_OPEN (0x00U) -#define TCPP0203_VCONN_SWITCH_ACK_CC1 (0x02U << TCPP0203_VCONN_SWITCH_ACK_POS) -#define TCPP0203_VCONN_SWITCH_ACK_CC2 (0x01U << TCPP0203_VCONN_SWITCH_ACK_POS) - -/** - * @brief TCPP0203 Gate Driver Provider Acknowledge - */ -#define TCPP0203_GD_PROVIDER_SWITCH_ACK_POS (2U) -#define TCPP0203_GD_PROVIDER_SWITCH_ACK_MSK (0x01U << TCPP0203_GD_PROVIDER_SWITCH_ACK_POS) -#define TCPP0203_GD_PROVIDER_SWITCH_ACK_OPEN (0x00U) -#define TCPP0203_GD_PROVIDER_SWITCH_ACK_CLOSED (TCPP0203_GD_PROVIDER_SWITCH_ACK_MSK) - -/** - * @brief TCPP0203 Gate Driver Consumer Acknowledge - */ -#define TCPP0203_GD_CONSUMER_SWITCH_ACK_POS (3U) -#define TCPP0203_GD_CONSUMER_SWITCH_ACK_MSK (0x01U << TCPP0203_GD_CONSUMER_SWITCH_ACK_POS) -#define TCPP0203_GD_CONSUMER_SWITCH_ACK_CLOSED (0x00U) -#define TCPP0203_GD_CONSUMER_SWITCH_ACK_OPEN (TCPP0203_GD_CONSUMER_SWITCH_ACK_MSK) - -/** - * @brief TCPP0203 Power Mode Acknowledge - */ -#define TCPP0203_POWER_MODE_ACK_POS (4U) -#define TCPP0203_POWER_MODE_ACK_MSK (0x03U << TCPP0203_POWER_MODE_ACK_POS) -#define TCPP0203_POWER_MODE_ACK_HIBERNATE (0x00U) -#define TCPP0203_POWER_MODE_ACK_LOWPOWER (0x01U << TCPP0203_POWER_MODE_ACK_POS) -#define TCPP0203_POWER_MODE_ACK_NORMAL (0x02U << TCPP0203_POWER_MODE_ACK_POS) - -/** - * @brief TCPP0203 VBUS Discharge Acknowledge - */ -#define TCPP0203_VBUS_DISCHARGE_ACK_POS (6U) -#define TCPP0203_VBUS_DISCHARGE_ACK_MSK (0x01U << TCPP0203_VBUS_DISCHARGE_ACK_POS) -#define TCPP0203_VBUS_DISCHARGE_ACK_OFF (0x00U) -#define TCPP0203_VBUS_DISCHARGE_ACK_ON (TCPP0203_VBUS_DISCHARGE_ACK_MSK) - -/** - * @brief TCPP0203 VConn Discharge Acknowledge - */ -#define TCPP0203_VCONN_DISCHARGE_ACK_POS (7U) -#define TCPP0203_VCONN_DISCHARGE_ACK_MSK (0x01U << TCPP0203_VCONN_DISCHARGE_ACK_POS) -#define TCPP0203_VCONN_DISCHARGE_ACK_OFF (0x00U) -#define TCPP0203_VCONN_DISCHARGE_ACK_ON (TCPP0203_VCONN_DISCHARGE_ACK_MSK) - -/** - * @brief TCPP0203 OCP Vconn Flag management - */ -#define TCPP0203_FLAG_OCP_VCONN_POS (0U) -#define TCPP0203_FLAG_OCP_VCONN_MSK (0x01U << TCPP0203_FLAG_OCP_VCONN_POS) -#define TCPP0203_FLAG_OCP_VCONN_SET (TCPP0203_FLAG_OCP_VCONN_MSK) -#define TCPP0203_FLAG_OCP_VCONN_RESET (0x00U) - -/** - * @brief TCPP0203 OCP VBUS Flag management - */ -#define TCPP0203_FLAG_OCP_VBUS_POS (1U) -#define TCPP0203_FLAG_OCP_VBUS_MSK (0x01U << TCPP0203_FLAG_OCP_VBUS_POS) -#define TCPP0203_FLAG_OCP_VBUS_SET (TCPP0203_FLAG_OCP_VBUS_MSK) -#define TCPP0203_FLAG_OCP_VBUS_RESET (0x00U) - -/** - * @brief TCPP0203 OVP VBUS Flag management - */ -#define TCPP0203_FLAG_OVP_VBUS_POS (2U) -#define TCPP0203_FLAG_OVP_VBUS_MSK (0x01U << TCPP0203_FLAG_OVP_VBUS_POS) -#define TCPP0203_FLAG_OVP_VBUS_SET (TCPP0203_FLAG_OVP_VBUS_MSK) -#define TCPP0203_FLAG_OVP_VBUS_RESET (0x00U) - -/** - * @brief TCPP0203 OVP CC Flag management - */ -#define TCPP0203_FLAG_OVP_CC_POS (3U) -#define TCPP0203_FLAG_OVP_CC_MSK (0x01U << TCPP0203_FLAG_OVP_CC_POS) -#define TCPP0203_FLAG_OVP_CC_SET (TCPP0203_FLAG_OVP_CC_MSK) -#define TCPP0203_FLAG_OVP_CC_RESET (0x00U) - -/** - * @brief TCPP0203 OTP Flag management - */ -#define TCPP0203_FLAG_OTP_POS (4U) -#define TCPP0203_FLAG_OTP_MSK (0x01U << TCPP0203_FLAG_OTP_POS) -#define TCPP0203_FLAG_OTP_SET (TCPP0203_FLAG_OTP_MSK) -#define TCPP0203_FLAG_OTP_RESET (0x00U) - -/** - * @brief TCPP0203 VBUS OK Flag management - */ -#define TCPP0203_FLAG_VBUS_OK_POS (5U) -#define TCPP0203_FLAG_VBUS_OK_MSK (0x01U << TCPP0203_FLAG_VBUS_OK_POS) -#define TCPP0203_FLAG_VBUS_OK_SET (TCPP0203_FLAG_VBUS_OK_MSK) -#define TCPP0203_FLAG_VBUS_OK_RESET (0x00U) - -/** - * @brief TCPP0203 VConn Power - */ -#define TCPP0203_FLAG_VCONN_PWR_POS (6U) -#define TCPP0203_FLAG_VCONN_PWR_MSK (0x01U << TCPP0203_FLAG_VCONN_PWR_POS) -#define TCPP0203_FLAG_VCONN_PWR_1W (TCPP0203_FLAG_VCONN_PWR_MSK) -#define TCPP0203_FLAG_VCONN_PWR_0_1W (0x00U) - -/** - * @brief TCPP0203 Device Type - */ -#define TCPP0203_DEVICE_TYPE_POS (7U) -#define TCPP0203_DEVICE_TYPE_MSK (0x01U << TCPP0203_DEVICE_TYPE_POS) -#define TCPP0203_DEVICE_TYPE_02 (TCPP0203_DEVICE_TYPE_MSK) -#define TCPP0203_DEVICE_TYPE_03 (0x00U) - -/** - * @} - */ - -/** @defgroup TCPP0203_Exported_Macros TCPP0203 Exported Macros - * @{ - */ -/** - * @} - */ - -/** @defgroup TCPP0203_Exported_Functions TCPP0203 Exported Functions - * @{ - */ - -/*------------------------------------------------------------------------------ - TCPP02/03 Type-C port protection functions -------------------------------------------------------------------------------*/ -/* High Layer codec functions */ -int32_t TCPP0203_RegisterBusIO(TCPP0203_Object_t *pObj, TCPP0203_IO_t *pIO); -int32_t TCPP0203_Init(TCPP0203_Object_t *pObj); -int32_t TCPP0203_DeInit(TCPP0203_Object_t *pObj); -int32_t TCPP0203_Reset(TCPP0203_Object_t *pObj); -int32_t TCPP0203_SetVConnSwitch(TCPP0203_Object_t *pObj, uint8_t VConnSwitch); -int32_t TCPP0203_SetGateDriverProvider(TCPP0203_Object_t *pObj, uint8_t GateDriverProvider); -int32_t TCPP0203_SetGateDriverConsumer(TCPP0203_Object_t *pObj, uint8_t GateDriverConsumer); -int32_t TCPP0203_SetPowerMode(TCPP0203_Object_t *pObj, uint8_t PowerMode); -int32_t TCPP0203_SetVBusDischarge(TCPP0203_Object_t *pObj, uint8_t VBusDischarge); -int32_t TCPP0203_SetVConnDischarge(TCPP0203_Object_t *pObj, uint8_t VConnDischarge); -int32_t TCPP0203_GetVConnSwitchAck(TCPP0203_Object_t *pObj, uint8_t *pVConnSwitchAck); -int32_t TCPP0203_GetGateDriverProviderAck(TCPP0203_Object_t *pObj, uint8_t *pGateDriverProviderAck); -int32_t TCPP0203_GetGateDriverConsumerAck(TCPP0203_Object_t *pObj, uint8_t *pGateDriverConsumerAck); -int32_t TCPP0203_GetPowerModeAck(TCPP0203_Object_t *pObj, uint8_t *pPowerModeAck); -int32_t TCPP0203_GetVBusDischargeAck(TCPP0203_Object_t *pObj, uint8_t *pVBusDischargeAck); -int32_t TCPP0203_GetVConnDischargeAck(TCPP0203_Object_t *pObj, uint8_t *pVConnDischargeAck); -int32_t TCPP0203_GetOCPVConnFlag(TCPP0203_Object_t *pObj, uint8_t *pOCPVConnFlag); -int32_t TCPP0203_GetOCPVBusFlag(TCPP0203_Object_t *pObj, uint8_t *pGetOCPVBusFlag); -int32_t TCPP0203_GetOVPVBusFlag(TCPP0203_Object_t *pObj, uint8_t *pOVPVBusFlag); -int32_t TCPP0203_GetOVPCCFlag(TCPP0203_Object_t *pObj, uint8_t *pOVPCCFlag); -int32_t TCPP0203_GetOTPFlag(TCPP0203_Object_t *pObj, uint8_t *pOTPFlag); -int32_t TCPP0203_GetVBusOkFlag(TCPP0203_Object_t *pObj, uint8_t *pVBusOkFlag); -int32_t TCPP0203_ReadTCPPType(TCPP0203_Object_t *pObj, uint8_t *pTCPPType); -int32_t TCPP0203_ReadVCONNPower(TCPP0203_Object_t *pObj, uint8_t *pVCONNPower); -int32_t TCPP0203_WriteCtrlRegister(TCPP0203_Object_t *pObj, uint8_t *pCtrlRegister); -int32_t TCPP0203_ReadAckRegister(TCPP0203_Object_t *pObj, uint8_t *pAckRegister); -int32_t TCPP0203_ReadFlagRegister(TCPP0203_Object_t *pObj, uint8_t *pFlagRegister); - -/** - * @} - */ - -/* TCPP02/03 Type-C port protection driver structure */ -extern TCPP0203_Drv_t TCPP0203_Driver; - -/** - * @} - */ - -/** - * @} - */ - -/** - * @} - */ - -#endif /* TCPP0203_H */ diff --git a/hw/bsp/stm32n6/boards/stm32n657nucleo/tcpp0203/tcpp0203_reg.c b/hw/bsp/stm32n6/boards/stm32n657nucleo/tcpp0203/tcpp0203_reg.c deleted file mode 100644 index 8025fa85e..000000000 --- a/hw/bsp/stm32n6/boards/stm32n657nucleo/tcpp0203/tcpp0203_reg.c +++ /dev/null @@ -1,73 +0,0 @@ -/** - ****************************************************************************** - * @file tcpp0203_reg.c - * @author MCD Application Team - * @brief This file provides unitary register function to control the TCPP02-03 - * Type-C port protection driver. - ****************************************************************************** - * @attention - * - * Copyright (c) 2021 STMicroelectronics. - * All rights reserved. - * - * This software is licensed under terms that can be found in the LICENSE file - * in the root directory of this software component. - * If no LICENSE file comes with this software, it is provided AS-IS. - * - ****************************************************************************** - */ - -/* Includes ------------------------------------------------------------------*/ -#include "tcpp0203_reg.h" - -/** @addtogroup BSP - * @{ - */ - -/** @addtogroup Components - * @{ - */ - -/** @addtogroup TCPP0203 - * @brief This file provides a set of functions needed to drive the - * TCPP02/03 Type-C port protection codec. - * @{ - */ - -/************** Generic Function *******************/ -/******************************************************************************* - * Function Name : tcpp0203_read_reg - * Description : Generic Reading function. It must be fulfilled with either - * I2C or SPI reading functions - * Input : Register Address, length of buffer - * Output : data Read - *******************************************************************************/ -int32_t tcpp0203_read_reg(const TCPP0203_ctx_t *ctx, uint8_t reg, uint8_t *data, uint8_t length) -{ - return ctx->ReadReg(ctx->handle, reg, data, length); -} - -/******************************************************************************* - * Function Name : tcpp0203_write_reg - * Description : Generic Writing function. It must be fulfilled with either - * I2C or SPI writing function - * Input : Register Address, data to be written, length of buffer - * Output : None - *******************************************************************************/ -int32_t tcpp0203_write_reg(const TCPP0203_ctx_t *ctx, uint8_t reg, uint8_t *data, uint8_t length) -{ - return ctx->WriteReg(ctx->handle, reg, data, length); -} - -/******************************************************************************/ -/** - * @} - */ - -/** - * @} - */ - -/** - * @} - */ diff --git a/hw/bsp/stm32n6/boards/stm32n657nucleo/tcpp0203/tcpp0203_reg.h b/hw/bsp/stm32n6/boards/stm32n657nucleo/tcpp0203/tcpp0203_reg.h deleted file mode 100644 index 92420e1fe..000000000 --- a/hw/bsp/stm32n6/boards/stm32n657nucleo/tcpp0203/tcpp0203_reg.h +++ /dev/null @@ -1,98 +0,0 @@ -/** - ****************************************************************************** - * @file tcpp0203_reg.h - * @author MCD Application Team - * @brief Header of tcpp0203_reg.c - * - ****************************************************************************** - * @attention - * - * Copyright (c) 2021 STMicroelectronics. - * All rights reserved. - * - * This software is licensed under terms that can be found in the LICENSE file - * in the root directory of this software component. - * If no LICENSE file comes with this software, it is provided AS-IS. - * - ****************************************************************************** - */ - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef TCPP0203_REG_H -#define TCPP0203_REG_H - -#include - -#ifdef __cplusplus -extern "C" { -#endif - -/* Includes ------------------------------------------------------------------*/ -/** @addtogroup BSP - * @{ - */ - -/** @addtogroup Component - * @{ - */ - -/** @addtogroup TCPP0203 - * @{ - */ - - -/** @defgroup TCPP0203_Exported_Constants TCPP0203 Exported Constants - * @{ - */ -/******************************************************************************/ -/****************************** REGISTER MAPPING ******************************/ -/******************************************************************************/ -#define TCPP0203_WRITE_REG 0x00U -#define TCPP0203_PROG_CTRL TCPP0203_WRITE_REG -#define TCPP0203_READ_REG1 0x01U -#define TCPP0203_ACK_REG TCPP0203_READ_REG1 -#define TCPP0203_READ_REG2 0x02U -#define TCPP0203_FLAG_REG TCPP0203_READ_REG2 - -/** - * @} - */ - -/************** Generic Function *******************/ - -typedef int32_t (*TCPP0203_Write_Func)(const void *, uint8_t, uint8_t *, uint8_t); -typedef int32_t (*TCPP0203_Read_Func)(const void *, uint8_t, uint8_t *, uint8_t); - -typedef struct -{ - TCPP0203_Write_Func WriteReg; - TCPP0203_Read_Func ReadReg; - void *handle; -} TCPP0203_ctx_t; - -/******************************************************************************* - * Register : Generic - All - * Address : Generic - All - * Bit Group Name: None - * Permission : W - *******************************************************************************/ -int32_t tcpp0203_write_reg(const TCPP0203_ctx_t *ctx, uint8_t reg, uint8_t *data, uint8_t length); -int32_t tcpp0203_read_reg(const TCPP0203_ctx_t *ctx, uint8_t reg, uint8_t *data, uint8_t length); - -#ifdef __cplusplus -} -#endif - -#endif /* TCPP0203_REG_H */ - -/** - * @} - */ - -/** - * @} - */ - -/** - * @} - */ diff --git a/hw/bsp/stm32n6/family.cmake b/hw/bsp/stm32n6/family.cmake index c2c634525..76763937e 100644 --- a/hw/bsp/stm32n6/family.cmake +++ b/hw/bsp/stm32n6/family.cmake @@ -6,6 +6,7 @@ set(ST_PREFIX stm32${ST_FAMILY}xx) set(ST_HAL_DRIVER ${TOP}/hw/mcu/st/stm32${ST_FAMILY}xx_hal_driver) set(ST_CMSIS ${TOP}/hw/mcu/st/cmsis_device_${ST_FAMILY}) set(CMSIS_5 ${TOP}/lib/CMSIS_5) +set(ST_TCPP0203 ${TOP}/hw/mcu/st/stm32-tcpp0203) # include board specific include(${CMAKE_CURRENT_LIST_DIR}/boards/${BOARD}/board.cmake) diff --git a/hw/bsp/stm32n6/family.mk b/hw/bsp/stm32n6/family.mk index d613e53d2..37087ed42 100644 --- a/hw/bsp/stm32n6/family.mk +++ b/hw/bsp/stm32n6/family.mk @@ -2,6 +2,7 @@ ST_FAMILY = n6 ST_PREFIX = stm32${ST_FAMILY}xx ST_CMSIS = hw/mcu/st/cmsis_device_$(ST_FAMILY) ST_HAL_DRIVER = hw/mcu/st/${ST_PREFIX}_hal_driver +ST_TCPP0203 = hw/mcu/st/stm32-tcpp0203 UF2_FAMILY_ID = 0x6db66083 diff --git a/tools/get_deps.py b/tools/get_deps.py index b2699b88c..6a36ef35d 100755 --- a/tools/get_deps.py +++ b/tools/get_deps.py @@ -133,6 +133,9 @@ deps_optional = { 'hw/mcu/st/stm32-mfxstm32l152': ['https://github.com/STMicroelectronics/stm32-mfxstm32l152.git', '7f4389efee9c6a655b55e5df3fceef5586b35f9b', 'stm32h7'], + 'hw/mcu/st/stm32-tcpp0203': ['https://github.com/STMicroelectronics/stm32-tcpp0203.git', + '9918655bff176ac3046ccf378b5c7bbbc6a38d15', + 'stm32h7rs stm32n6'], 'hw/mcu/st/stm32c0xx_hal_driver': ['https://github.com/STMicroelectronics/stm32c0xx_hal_driver.git', '41253e2f1d7ae4a4d0c379cf63f5bcf71fcf8eb3', 'stm32c0'], -- cgit v1.3.1 From 0388700ad7c0fc8565457a56d7e7bd5744ac0d1d Mon Sep 17 00:00:00 2001 From: hathach Date: Wed, 2 Jul 2025 15:32:12 +0700 Subject: update esp build, replace TUSB_MCU_VENDOR_ESPRESSIF by ESP_PLATFORM --- .github/workflows/build.yml | 2 +- examples/device/audio_4_channel_mic_freertos/src/main.c | 11 +++++------ .../device/audio_4_channel_mic_freertos/src/tusb_config.h | 2 +- examples/device/audio_test_freertos/src/main.c | 8 ++++---- examples/device/audio_test_freertos/src/tusb_config.h | 2 +- examples/device/board_test/src/tusb_config.h | 2 +- examples/device/cdc_msc_freertos/src/main.c | 8 ++++---- examples/device/cdc_msc_freertos/src/tusb_config.h | 2 +- examples/device/hid_composite_freertos/src/main.c | 11 +++++------ examples/device/hid_composite_freertos/src/tusb_config.h | 2 +- examples/device/midi_test_freertos/src/main.c | 8 ++++---- examples/device/video_capture/src/main.c | 6 +++--- examples/device/video_capture/src/tusb_config.h | 2 +- examples/device/video_capture_2ch/src/main.c | 6 +++--- examples/device/video_capture_2ch/src/tusb_config.h | 2 +- examples/host/cdc_msc_hid_freertos/src/cdc_app.c | 2 +- examples/host/cdc_msc_hid_freertos/src/main.c | 8 ++++---- examples/host/cdc_msc_hid_freertos/src/tusb_config.h | 2 +- examples/host/device_info/src/main.c | 8 ++++---- examples/host/device_info/src/tusb_config.h | 2 +- examples/host/midi_rx/src/tusb_config.h | 2 +- examples/typec/power_delivery/src/main.c | 5 ++--- hw/bsp/board.c | 7 ++++--- hw/bsp/board_api.h | 3 ++- hw/bsp/espressif/boards/family.c | 4 ++++ tools/build.py | 6 ++---- tools/build_utils.py | 2 ++ 27 files changed, 64 insertions(+), 61 deletions(-) (limited to 'tools') diff --git a/.github/workflows/build.yml b/.github/workflows/build.yml index 58963013b..97f219e6f 100644 --- a/.github/workflows/build.yml +++ b/.github/workflows/build.yml @@ -93,7 +93,7 @@ jobs: matrix: toolchain: - 'aarch64-gcc' - - 'arm-clang' + #- 'arm-clang' - 'arm-gcc' - 'msp430-gcc' - 'riscv-gcc' diff --git a/examples/device/audio_4_channel_mic_freertos/src/main.c b/examples/device/audio_4_channel_mic_freertos/src/main.c index 99278b5cc..d5a34b194 100644 --- a/examples/device/audio_4_channel_mic_freertos/src/main.c +++ b/examples/device/audio_4_channel_mic_freertos/src/main.c @@ -39,7 +39,7 @@ #include "bsp/board_api.h" #include "tusb.h" -#if TUSB_MCU_VENDOR_ESPRESSIF +#ifdef ESP_PLATFORM // ESP-IDF need "freertos/" prefix in include path. // CFG_TUSB_OS_INC_PATH should be defined accordingly. #include "freertos/FreeRTOS.h" @@ -158,17 +158,16 @@ int main(void) xTaskCreate(audio_task, "audio", AUDIO_STACK_SIZE, NULL, configMAX_PRIORITIES - 1, NULL); #endif - // skip starting scheduler (and return) for ESP32-S2 or ESP32-S3 - #if !TUSB_MCU_VENDOR_ESPRESSIF + // only start scheduler for non-espressif mcu + #ifndef ESP_PLATFORM vTaskStartScheduler(); #endif return 0; } -#if TUSB_MCU_VENDOR_ESPRESSIF -void app_main(void) -{ +#ifdef ESP_PLATFORM +void app_main(void) { main(); } #endif diff --git a/examples/device/audio_4_channel_mic_freertos/src/tusb_config.h b/examples/device/audio_4_channel_mic_freertos/src/tusb_config.h index 5ac51b153..f7c0efe08 100644 --- a/examples/device/audio_4_channel_mic_freertos/src/tusb_config.h +++ b/examples/device/audio_4_channel_mic_freertos/src/tusb_config.h @@ -59,7 +59,7 @@ extern "C" { #endif // Espressif IDF requires "freertos/" prefix in include path -#if TUSB_MCU_VENDOR_ESPRESSIF +#ifdef ESP_PLATFORM #define CFG_TUSB_OS_INC_PATH freertos/ #endif diff --git a/examples/device/audio_test_freertos/src/main.c b/examples/device/audio_test_freertos/src/main.c index c5143c3fc..3831be87f 100644 --- a/examples/device/audio_test_freertos/src/main.c +++ b/examples/device/audio_test_freertos/src/main.c @@ -38,7 +38,7 @@ #include "bsp/board_api.h" #include "tusb.h" -#if TUSB_MCU_VENDOR_ESPRESSIF +#ifdef ESP_PLATFORM // ESP-IDF need "freertos/" prefix in include path. // CFG_TUSB_OS_INC_PATH should be defined accordingly. #include "freertos/FreeRTOS.h" @@ -132,15 +132,15 @@ int main(void) xTaskCreate(usb_device_task, "usbd", USBD_STACK_SIZE, NULL, configMAX_PRIORITIES - 1, NULL); #endif - // skip starting scheduler (and return) for ESP32-S2 or ESP32-S3 - #if !TUSB_MCU_VENDOR_ESPRESSIF + // only start scheduler for non-espressif mcu + #ifndef ESP_PLATFORM vTaskStartScheduler(); #endif return 0; } -#if TUSB_MCU_VENDOR_ESPRESSIF +#ifdef ESP_PLATFORM void app_main(void) { main(); } diff --git a/examples/device/audio_test_freertos/src/tusb_config.h b/examples/device/audio_test_freertos/src/tusb_config.h index 61c5cbb96..0fb2106e2 100644 --- a/examples/device/audio_test_freertos/src/tusb_config.h +++ b/examples/device/audio_test_freertos/src/tusb_config.h @@ -59,7 +59,7 @@ extern "C" { #endif // Espressif IDF requires "freertos/" prefix in include path -#if TUSB_MCU_VENDOR_ESPRESSIF +#ifdef ESP_PLATFORM #define CFG_TUSB_OS_INC_PATH freertos/ #endif diff --git a/examples/device/board_test/src/tusb_config.h b/examples/device/board_test/src/tusb_config.h index 8ac3bc8de..81829d450 100644 --- a/examples/device/board_test/src/tusb_config.h +++ b/examples/device/board_test/src/tusb_config.h @@ -44,7 +44,7 @@ #endif // Espressif IDF requires "freertos/" prefix in include path -#if TUSB_MCU_VENDOR_ESPRESSIF +#ifdef ESP_PLATFORM #define CFG_TUSB_OS_INC_PATH freertos/ #endif diff --git a/examples/device/cdc_msc_freertos/src/main.c b/examples/device/cdc_msc_freertos/src/main.c index 4dada9801..6fe964153 100644 --- a/examples/device/cdc_msc_freertos/src/main.c +++ b/examples/device/cdc_msc_freertos/src/main.c @@ -30,7 +30,7 @@ #include "bsp/board_api.h" #include "tusb.h" -#if TUSB_MCU_VENDOR_ESPRESSIF +#ifdef ESP_PLATFORM #define USBD_STACK_SIZE 4096 #else // Increase stack size when debug log is enabled @@ -91,15 +91,15 @@ int main(void) { xTaskCreate(cdc_task, "cdc", CDC_STACK_SZIE, NULL, configMAX_PRIORITIES - 2, NULL); #endif -#if !TUSB_MCU_VENDOR_ESPRESSIF - // skip starting scheduler (and return) for ESP32-S2 or ESP32-S3 +#ifndef ESP_PLATFORM + // only start scheduler for non-espressif mcu vTaskStartScheduler(); #endif return 0; } -#if TUSB_MCU_VENDOR_ESPRESSIF +#ifdef ESP_PLATFORM void app_main(void) { main(); } diff --git a/examples/device/cdc_msc_freertos/src/tusb_config.h b/examples/device/cdc_msc_freertos/src/tusb_config.h index c3f2f7fb5..71a0e985a 100644 --- a/examples/device/cdc_msc_freertos/src/tusb_config.h +++ b/examples/device/cdc_msc_freertos/src/tusb_config.h @@ -59,7 +59,7 @@ #endif // Espressif IDF requires "freertos/" prefix in include path -#if TUSB_MCU_VENDOR_ESPRESSIF +#ifdef ESP_PLATFORM #define CFG_TUSB_OS_INC_PATH freertos/ #endif diff --git a/examples/device/hid_composite_freertos/src/main.c b/examples/device/hid_composite_freertos/src/main.c index 30c0331ef..3f5e8a91c 100644 --- a/examples/device/hid_composite_freertos/src/main.c +++ b/examples/device/hid_composite_freertos/src/main.c @@ -31,7 +31,7 @@ #include "tusb.h" #include "usb_descriptors.h" -#if TUSB_MCU_VENDOR_ESPRESSIF +#ifdef ESP_PLATFORM // ESP-IDF need "freertos/" prefix in include path. // CFG_TUSB_OS_INC_PATH should be defined accordingly. #include "freertos/FreeRTOS.h" @@ -112,17 +112,16 @@ int main(void) xTimerStart(blinky_tm, 0); - // skip starting scheduler (and return) for ESP32-S2 or ESP32-S3 -#if !TUSB_MCU_VENDOR_ESPRESSIF + // only start scheduler for non-espressif mcu +#ifndef ESP_PLATFORM vTaskStartScheduler(); #endif return 0; } -#if TUSB_MCU_VENDOR_ESPRESSIF -void app_main(void) -{ +#ifdef ESP_PLATFORM +void app_main(void) { main(); } #endif diff --git a/examples/device/hid_composite_freertos/src/tusb_config.h b/examples/device/hid_composite_freertos/src/tusb_config.h index 6ec38b95c..b28033a0c 100644 --- a/examples/device/hid_composite_freertos/src/tusb_config.h +++ b/examples/device/hid_composite_freertos/src/tusb_config.h @@ -59,7 +59,7 @@ #endif // Espressif IDF requires "freertos/" prefix in include path -#if TUSB_MCU_VENDOR_ESPRESSIF +#ifdef ESP_PLATFORM #define CFG_TUSB_OS_INC_PATH freertos/ #endif diff --git a/examples/device/midi_test_freertos/src/main.c b/examples/device/midi_test_freertos/src/main.c index dbe89080c..3e406d38d 100644 --- a/examples/device/midi_test_freertos/src/main.c +++ b/examples/device/midi_test_freertos/src/main.c @@ -40,7 +40,7 @@ //--------------------------------------------------------------------+ // MACRO CONSTANT TYPEDEF PROTYPES //--------------------------------------------------------------------+ -#if TUSB_MCU_VENDOR_ESPRESSIF +#ifdef ESP_PLATFORM #define USBD_STACK_SIZE 4096 #else // Increase stack size when debug log is enabled @@ -95,15 +95,15 @@ int main(void) { xTaskCreate(midi_task, "midi", MIDI_STACK_SIZE, NULL, configMAX_PRIORITIES - 2, NULL); #endif -#if !TUSB_MCU_VENDOR_ESPRESSIF - // skip starting scheduler (and return) for ESP32-S2 or ESP32-S3 +#ifndef ESP_PLATFORM + // only start scheduler for non-espressif mcu vTaskStartScheduler(); #endif return 0; } -#if TUSB_MCU_VENDOR_ESPRESSIF +#ifdef ESP_PLATFORM void app_main(void) { main(); } diff --git a/examples/device/video_capture/src/main.c b/examples/device/video_capture/src/main.c index 04d4af4e5..0406279fd 100644 --- a/examples/device/video_capture/src/main.c +++ b/examples/device/video_capture/src/main.c @@ -292,7 +292,7 @@ void led_blinking_task(void* param) { #define BLINKY_STACK_SIZE configMINIMAL_STACK_SIZE #define VIDEO_STACK_SIZE (configMINIMAL_STACK_SIZE*4) -#if TUSB_MCU_VENDOR_ESPRESSIF +#ifdef ESP_PLATFORM #define USBD_STACK_SIZE 4096 int main(void); void app_main(void) { @@ -351,8 +351,8 @@ void freertos_init_task(void) { xTaskCreate(video_task, "video", VIDEO_STACK_SZIE, NULL, configMAX_PRIORITIES - 2, NULL); #endif - // skip starting scheduler (and return) for ESP32-S2 or ESP32-S3 - #if !TUSB_MCU_VENDOR_ESPRESSIF + // only start scheduler for non-espressif mcu + #ifndef ESP_PLATFORM vTaskStartScheduler(); #endif } diff --git a/examples/device/video_capture/src/tusb_config.h b/examples/device/video_capture/src/tusb_config.h index 6dbd6f2a5..4ba86ca65 100644 --- a/examples/device/video_capture/src/tusb_config.h +++ b/examples/device/video_capture/src/tusb_config.h @@ -58,7 +58,7 @@ #endif // Espressif IDF requires "freertos/" prefix in include path -#if TUSB_MCU_VENDOR_ESPRESSIF +#ifdef ESP_PLATFORM #define CFG_TUSB_OS_INC_PATH freertos/ #endif diff --git a/examples/device/video_capture_2ch/src/main.c b/examples/device/video_capture_2ch/src/main.c index 245e7abb8..dc616e3fa 100644 --- a/examples/device/video_capture_2ch/src/main.c +++ b/examples/device/video_capture_2ch/src/main.c @@ -300,7 +300,7 @@ void led_blinking_task(void* param) { #define BLINKY_STACK_SIZE configMINIMAL_STACK_SIZE #define VIDEO_STACK_SIZE (configMINIMAL_STACK_SIZE*4) -#if TUSB_MCU_VENDOR_ESPRESSIF +#ifdef ESP_PLATFORM #define USBD_STACK_SIZE 4096 int main(void); void app_main(void) { @@ -359,8 +359,8 @@ void freertos_init_task(void) { xTaskCreate(video_task, "video", VIDEO_STACK_SZIE, NULL, configMAX_PRIORITIES - 2, NULL); #endif - // skip starting scheduler (and return) for ESP32-S2 or ESP32-S3 - #if !TUSB_MCU_VENDOR_ESPRESSIF + // only start scheduler for non-espressif mcu + #ifndef ESP_PLATFORM vTaskStartScheduler(); #endif } diff --git a/examples/device/video_capture_2ch/src/tusb_config.h b/examples/device/video_capture_2ch/src/tusb_config.h index 91775a327..e84e49879 100644 --- a/examples/device/video_capture_2ch/src/tusb_config.h +++ b/examples/device/video_capture_2ch/src/tusb_config.h @@ -58,7 +58,7 @@ #endif // Espressif IDF requires "freertos/" prefix in include path -#if TUSB_MCU_VENDOR_ESPRESSIF +#ifdef ESP_PLATFORM #define CFG_TUSB_OS_INC_PATH freertos/ #endif diff --git a/examples/host/cdc_msc_hid_freertos/src/cdc_app.c b/examples/host/cdc_msc_hid_freertos/src/cdc_app.c index e279ad509..d99760a02 100644 --- a/examples/host/cdc_msc_hid_freertos/src/cdc_app.c +++ b/examples/host/cdc_msc_hid_freertos/src/cdc_app.c @@ -27,7 +27,7 @@ #include "tusb.h" #include "bsp/board_api.h" -#if TUSB_MCU_VENDOR_ESPRESSIF +#ifdef ESP_PLATFORM #define CDC_STACK_SZIE 2048 #else #define CDC_STACK_SZIE (3*configMINIMAL_STACK_SIZE/2) diff --git a/examples/host/cdc_msc_hid_freertos/src/main.c b/examples/host/cdc_msc_hid_freertos/src/main.c index 64a108254..0bcb355ec 100644 --- a/examples/host/cdc_msc_hid_freertos/src/main.c +++ b/examples/host/cdc_msc_hid_freertos/src/main.c @@ -30,7 +30,7 @@ #include "bsp/board_api.h" #include "tusb.h" -#if TUSB_MCU_VENDOR_ESPRESSIF +#ifdef ESP_PLATFORM #define USBH_STACK_SIZE 4096 #else // Increase stack size when debug log is enabled @@ -86,15 +86,15 @@ int main(void) { xTimerStart(blinky_tm, 0); - // skip starting scheduler (and return) for ESP32-S2 or ESP32-S3 -#if !TUSB_MCU_VENDOR_ESPRESSIF + // only start scheduler for non-espressif mcu +#ifndef ESP_PLATFORM vTaskStartScheduler(); #endif return 0; } -#if TUSB_MCU_VENDOR_ESPRESSIF +#ifdef ESP_PLATFORM void app_main(void) { main(); } diff --git a/examples/host/cdc_msc_hid_freertos/src/tusb_config.h b/examples/host/cdc_msc_hid_freertos/src/tusb_config.h index bc8887211..3cdb227e2 100644 --- a/examples/host/cdc_msc_hid_freertos/src/tusb_config.h +++ b/examples/host/cdc_msc_hid_freertos/src/tusb_config.h @@ -44,7 +44,7 @@ #endif // Espressif IDF requires "freertos/" prefix in include path -#if TUSB_MCU_VENDOR_ESPRESSIF +#ifdef ESP_PLATFORM #define CFG_TUSB_OS_INC_PATH freertos/ #endif diff --git a/examples/host/device_info/src/main.c b/examples/host/device_info/src/main.c index e924a137b..7189972d6 100644 --- a/examples/host/device_info/src/main.c +++ b/examples/host/device_info/src/main.c @@ -268,7 +268,7 @@ void led_blinking_task(void* param) { #define BLINKY_STACK_SIZE configMINIMAL_STACK_SIZE -#if TUSB_MCU_VENDOR_ESPRESSIF +#ifdef ESP_PLATFORM #define USB_STACK_SIZE 4096 #else // Increase stack size when debug log is enabled @@ -285,7 +285,7 @@ StackType_t usb_stack[USB_STACK_SIZE]; StaticTask_t usb_taskdef; #endif -#if TUSB_MCU_VENDOR_ESPRESSIF +#ifdef ESP_PLATFORM void app_main(void) { main(); } @@ -308,8 +308,8 @@ void init_freertos_task(void) { xTaskCreate(usb_host_task, "usbh", USB_STACK_SIZE, NULL, configMAX_PRIORITIES - 1, NULL); #endif - // skip starting scheduler (and return) for ESP32-S2 or ESP32-S3 -#if !TUSB_MCU_VENDOR_ESPRESSIF + // only start scheduler for non-espressif mcu +#ifndef ESP_PLATFORM vTaskStartScheduler(); #endif } diff --git a/examples/host/device_info/src/tusb_config.h b/examples/host/device_info/src/tusb_config.h index e12970c12..e4ca2528e 100644 --- a/examples/host/device_info/src/tusb_config.h +++ b/examples/host/device_info/src/tusb_config.h @@ -40,7 +40,7 @@ #endif // Espressif IDF requires "freertos/" prefix in include path -#if TUSB_MCU_VENDOR_ESPRESSIF +#ifdef ESP_PLATFORM #define CFG_TUSB_OS_INC_PATH freertos/ #endif diff --git a/examples/host/midi_rx/src/tusb_config.h b/examples/host/midi_rx/src/tusb_config.h index c9b430388..76bdf87f3 100644 --- a/examples/host/midi_rx/src/tusb_config.h +++ b/examples/host/midi_rx/src/tusb_config.h @@ -40,7 +40,7 @@ extern "C" { #endif // Espressif IDF requires "freertos/" prefix in include path -#if TUSB_MCU_VENDOR_ESPRESSIF +#ifdef ESP_PLATFORM #define CFG_TUSB_OS_INC_PATH freertos/ #endif diff --git a/examples/typec/power_delivery/src/main.c b/examples/typec/power_delivery/src/main.c index 068dbbeb1..de0db4721 100644 --- a/examples/typec/power_delivery/src/main.c +++ b/examples/typec/power_delivery/src/main.c @@ -71,9 +71,8 @@ int main(void) } } -#if TUSB_MCU_VENDOR_ESPRESSIF -void app_main(void) -{ +#ifdef ESP_PLATFORM +void app_main(void) { main(); } #endif diff --git a/hw/bsp/board.c b/hw/bsp/board.c index 4b8e5950f..8f2f93306 100644 --- a/hw/bsp/board.c +++ b/hw/bsp/board.c @@ -66,7 +66,6 @@ int sys_read(int fhdl, char *buf, size_t count) { #elif defined(LOGGER_SWO) #define ITM_BASE 0xE0000000 - #define ITM_STIM0 (*((volatile uint8_t*)(ITM_BASE + 0))) #define ITM_TER *((volatile uint32_t*)(ITM_BASE + 0xE00)) #define ITM_TCR *((volatile uint32_t*)(ITM_BASE + 0xE80)) @@ -150,6 +149,9 @@ int board_getchar(void) { return (sys_read(0, &c, 1) > 0) ? (int) c : (-1); } +void board_putchar(int c) { + sys_write(0, (const char*)&c, 1); +} uint32_t tusb_time_millis_api(void) { return board_millis(); @@ -158,7 +160,7 @@ uint32_t tusb_time_millis_api(void) { //-------------------------------------------------------------------- // FreeRTOS hooks //-------------------------------------------------------------------- -#if CFG_TUSB_OS == OPT_OS_FREERTOS && !TUSB_MCU_VENDOR_ESPRESSIF +#if CFG_TUSB_OS == OPT_OS_FREERTOS && !defined(ESP_PLATFORM) #include "FreeRTOS.h" #include "task.h" @@ -240,5 +242,4 @@ void vApplicationSetupTimerInterrupt(void) { } #endif - #endif diff --git a/hw/bsp/board_api.h b/hw/bsp/board_api.h index 9cdbbf0d3..328fe9363 100644 --- a/hw/bsp/board_api.h +++ b/hw/bsp/board_api.h @@ -41,7 +41,7 @@ extern "C" { #if CFG_TUSB_OS == OPT_OS_ZEPHYR #include #elif CFG_TUSB_OS == OPT_OS_FREERTOS - #if TUSB_MCU_VENDOR_ESPRESSIF + #ifdef ESP_PLATFORM // ESP-IDF need "freertos/" prefix in include path. // CFG_TUSB_OS_INC_PATH should be defined accordingly. #include "freertos/FreeRTOS.h" @@ -195,6 +195,7 @@ static inline void board_delay(uint32_t ms) { // stdio getchar() is blocking, this is non-blocking version int board_getchar(void); +void board_putchar(int c); #ifdef __cplusplus } diff --git a/hw/bsp/espressif/boards/family.c b/hw/bsp/espressif/boards/family.c index 8f6c4bee2..2a5deed26 100644 --- a/hw/bsp/espressif/boards/family.c +++ b/hw/bsp/espressif/boards/family.c @@ -156,6 +156,10 @@ int board_getchar(void) { return getchar(); } +void board_putchar(int c) { + putchar(c); +} + //-------------------------------------------------------------------- // PHY Init //-------------------------------------------------------------------- diff --git a/tools/build.py b/tools/build.py index 6e73681fe..eaa383d73 100755 --- a/tools/build.py +++ b/tools/build.py @@ -101,10 +101,8 @@ def cmake_board(board, toolchain, build_flags_on): if build_utils.skip_example(example, board): ret[2] += 1 else: - rcmd = run_cmd(f'cmake examples/{example} -B {build_dir}/{example} -G Ninja ' - f'-DBOARD={board} {build_flags}') - if rcmd.returncode == 0: - rcmd = run_cmd(f'cmake --build {build_dir}/{example}') + rcmd = run_cmd(f'idf.py -C examples/{example} -B {build_dir}/{example} -G Ninja ' + f'-DBOARD={board} {build_flags} build') ret[0 if rcmd.returncode == 0 else 1] += 1 else: rcmd = run_cmd(f'cmake examples -B {build_dir} -G Ninja -DBOARD={board} -DCMAKE_BUILD_TYPE=MinSizeRel ' diff --git a/tools/build_utils.py b/tools/build_utils.py index 2998f940d..d80ceea7c 100755 --- a/tools/build_utils.py +++ b/tools/build_utils.py @@ -26,6 +26,8 @@ def skip_example(example, board): # family.mk family_mk = family_dir / "family.mk" + if not family_mk.exists(): + family_mk = family_dir / "family.cmake" mk_contents = family_mk.read_text() # Find the mcu, first in family mk then board mk -- cgit v1.3.1 From 52f0427096a9e20b62dc3055a153a60e50317297 Mon Sep 17 00:00:00 2001 From: hathach Date: Wed, 2 Jul 2025 16:34:17 +0700 Subject: remove make wrapper for rp2040/espressif --- docs/reference/getting_started.rst | 2 +- hw/bsp/rp2040/family.mk | 16 ---------------- tools/build.py | 21 +++++++++++++-------- 3 files changed, 14 insertions(+), 25 deletions(-) delete mode 100644 hw/bsp/rp2040/family.mk (limited to 'tools') diff --git a/docs/reference/getting_started.rst b/docs/reference/getting_started.rst index ee68f6386..5b009f21e 100644 --- a/docs/reference/getting_started.rst +++ b/docs/reference/getting_started.rst @@ -82,7 +82,7 @@ You only need to do this once per family. Check out `complete list of dependenci Build Examples ^^^^^^^^^^^^^^ -Examples support make and cmake build system, though some MCU family such as espressif/rp2040 only support cmake. First change directory to an example folder. +Examples support make and cmake build system for most MCUs, however some MCU families such as espressif or rp2040 only support cmake. First change directory to an example folder. .. code-block:: bash diff --git a/hw/bsp/rp2040/family.mk b/hw/bsp/rp2040/family.mk deleted file mode 100644 index 813683c54..000000000 --- a/hw/bsp/rp2040/family.mk +++ /dev/null @@ -1,16 +0,0 @@ -JLINK_DEVICE = rp2040_m0_0 -PYOCD_TARGET = rp2040 - -ifeq ($(DEBUG), 1) -CMAKE_DEFSYM += -DCMAKE_BUILD_TYPE=Debug -endif - -$(BUILD): - cmake -S . -B $(BUILD) -DFAMILY=$(FAMILY) -DBOARD=$(BOARD) -DPICO_BUILD_DOCS=0 $(CMAKE_DEFSYM) - -all: $(BUILD) - $(MAKE) -C $(BUILD) - -flash: flash-pyocd -flash-uf2: - @$(CP) $(BUILD)/$(PROJECT).uf2 /media/$(USER)/RPI-RP2 diff --git a/tools/build.py b/tools/build.py index eaa383d73..f639fba81 100755 --- a/tools/build.py +++ b/tools/build.py @@ -154,16 +154,21 @@ def make_one_example(example, board, make_option): def make_board(board, toolchain): print(build_separator) - all_examples = get_examples(find_family(board)) + family = find_family(board); + all_examples = get_examples(family) start_time = time.monotonic() ret = [0, 0, 0] - with Pool(processes=os.cpu_count()) as pool: - pool_args = list((map(lambda e, b=board, o=f"TOOLCHAIN={toolchain}": [e, b, o], all_examples))) - r = pool.starmap(make_one_example, pool_args) - # sum all element of same index (column sum) - ret = list(map(sum, list(zip(*r)))) - example = 'all' - print_build_result(board, example, 0 if ret[1] == 0 else 1, time.monotonic() - start_time) + if family == 'espressif' or family == 'rp2040': + # espressif and rp2040 do not support make, use cmake instead + final_status = 2 + else: + with Pool(processes=os.cpu_count()) as pool: + pool_args = list((map(lambda e, b=board, o=f"TOOLCHAIN={toolchain}": [e, b, o], all_examples))) + r = pool.starmap(make_one_example, pool_args) + # sum all element of same index (column sum) + ret = list(map(sum, list(zip(*r)))) + final_status = 0 if ret[1] == 0 else 1 + print_build_result(board, 'all', final_status, time.monotonic() - start_time) return ret -- cgit v1.3.1