From 3cb4d738996e0856ab42654e421fd766652519bd Mon Sep 17 00:00:00 2001 From: hathach Date: Fri, 30 Jun 2023 14:52:04 +0700 Subject: clean up ra makefile --- tools/make/cpu/cortex-m0.mk | 2 +- tools/make/cpu/cortex-m0plus.mk | 2 +- tools/make/cpu/cortex-m3.mk | 2 +- tools/make/cpu/cortex-m33.mk | 2 +- tools/make/cpu/cortex-m4.mk | 2 +- tools/make/cpu/cortex-m7.mk | 2 +- 6 files changed, 6 insertions(+), 6 deletions(-) (limited to 'tools') diff --git a/tools/make/cpu/cortex-m0.mk b/tools/make/cpu/cortex-m0.mk index c264802c8..feb0f395b 100644 --- a/tools/make/cpu/cortex-m0.mk +++ b/tools/make/cpu/cortex-m0.mk @@ -11,4 +11,4 @@ else ifeq ($(TOOLCHAIN),iar) endif # For freeRTOS port source -FREERTOS_PORTABLE_SRC = $(FREERTOS_PORTABLE_PATH)/ARM_CM0 +FREERTOS_PORTABLE_SRC ?= $(FREERTOS_PORTABLE_PATH)/ARM_CM0 diff --git a/tools/make/cpu/cortex-m0plus.mk b/tools/make/cpu/cortex-m0plus.mk index 626f7156e..b416b7a4a 100644 --- a/tools/make/cpu/cortex-m0plus.mk +++ b/tools/make/cpu/cortex-m0plus.mk @@ -11,4 +11,4 @@ else ifeq ($(TOOLCHAIN),iar) endif # For freeRTOS port source -FREERTOS_PORTABLE_SRC = $(FREERTOS_PORTABLE_PATH)/ARM_CM0 +FREERTOS_PORTABLE_SRC ?= $(FREERTOS_PORTABLE_PATH)/ARM_CM0 diff --git a/tools/make/cpu/cortex-m3.mk b/tools/make/cpu/cortex-m3.mk index c81cbace6..7a34b9e04 100644 --- a/tools/make/cpu/cortex-m3.mk +++ b/tools/make/cpu/cortex-m3.mk @@ -14,4 +14,4 @@ else ifeq ($(TOOLCHAIN),iar) endif # For freeRTOS port source -FREERTOS_PORTABLE_SRC = $(FREERTOS_PORTABLE_PATH)/ARM_CM3 +FREERTOS_PORTABLE_SRC ?= $(FREERTOS_PORTABLE_PATH)/ARM_CM3 diff --git a/tools/make/cpu/cortex-m33.mk b/tools/make/cpu/cortex-m33.mk index e53f5c2b1..fe5b7b380 100644 --- a/tools/make/cpu/cortex-m33.mk +++ b/tools/make/cpu/cortex-m33.mk @@ -16,4 +16,4 @@ else ifeq ($(TOOLCHAIN),iar) endif -FREERTOS_PORTABLE_SRC = $(FREERTOS_PORTABLE_PATH)/ARM_CM33_NTZ/non_secure +FREERTOS_PORTABLE_SRC ?= $(FREERTOS_PORTABLE_PATH)/ARM_CM33_NTZ/non_secure diff --git a/tools/make/cpu/cortex-m4.mk b/tools/make/cpu/cortex-m4.mk index fabe05632..d8776b5d8 100644 --- a/tools/make/cpu/cortex-m4.mk +++ b/tools/make/cpu/cortex-m4.mk @@ -10,4 +10,4 @@ else ifeq ($(TOOLCHAIN),iar) ASFLAGS += --cpu cortex-m4 --fpu VFPv4 endif -FREERTOS_PORTABLE_SRC = $(FREERTOS_PORTABLE_PATH)/ARM_CM4F +FREERTOS_PORTABLE_SRC ?= $(FREERTOS_PORTABLE_PATH)/ARM_CM4F diff --git a/tools/make/cpu/cortex-m7.mk b/tools/make/cpu/cortex-m7.mk index 0e53cbe9c..0e3461787 100644 --- a/tools/make/cpu/cortex-m7.mk +++ b/tools/make/cpu/cortex-m7.mk @@ -16,4 +16,4 @@ else ifeq ($(TOOLCHAIN),iar) endif -FREERTOS_PORTABLE_SRC = $(FREERTOS_PORTABLE_PATH)/ARM_CM7/r0p1 +FREERTOS_PORTABLE_SRC ?= $(FREERTOS_PORTABLE_PATH)/ARM_CM7/r0p1 -- cgit v1.3.1 From 22fb66436db38e701b0b1c69ea80c5c3d50d445e Mon Sep 17 00:00:00 2001 From: hathach Date: Sat, 1 Jul 2023 16:40:47 +0700 Subject: update linker --- hw/bsp/ra/FreeRTOSConfig/FreeRTOSConfig.h | 180 ++++++++ hw/bsp/ra/boards/ra4m1_ek/board.cmake | 11 +- hw/bsp/ra/boards/ra4m1_ek/board.h | 18 +- hw/bsp/ra/boards/ra4m1_ek/board.mk | 5 - hw/bsp/ra/boards/ra4m1_ek/ra4m1_ek.ld | 739 ------------------------------ hw/bsp/ra/boards/ra4m3_ek/board.cmake | 11 +- hw/bsp/ra/boards/ra4m3_ek/board.mk | 5 - hw/bsp/ra/boards/ra4m3_ek/ra4m3_ek.ld | 576 ----------------------- hw/bsp/ra/family.c | 167 ++++--- hw/bsp/ra/family.cmake | 17 +- hw/bsp/ra/family.mk | 5 + hw/bsp/ra/linker/gcc/fsp.ld | 716 +++++++++++++++++++++++++++++ hw/bsp/ra/linker/gcc/ra4m1.ld | 22 + hw/bsp/ra/linker/gcc/ra4m3.ld | 22 + hw/bsp/ra/linker/gcc/ra6m1.ld | 22 + tools/cmake/cpu/cortex-m4.cmake | 8 +- 16 files changed, 1086 insertions(+), 1438 deletions(-) create mode 100644 hw/bsp/ra/FreeRTOSConfig/FreeRTOSConfig.h delete mode 100644 hw/bsp/ra/boards/ra4m1_ek/ra4m1_ek.ld delete mode 100644 hw/bsp/ra/boards/ra4m3_ek/ra4m3_ek.ld create mode 100644 hw/bsp/ra/linker/gcc/fsp.ld create mode 100644 hw/bsp/ra/linker/gcc/ra4m1.ld create mode 100644 hw/bsp/ra/linker/gcc/ra4m3.ld create mode 100644 hw/bsp/ra/linker/gcc/ra6m1.ld (limited to 'tools') diff --git a/hw/bsp/ra/FreeRTOSConfig/FreeRTOSConfig.h b/hw/bsp/ra/FreeRTOSConfig/FreeRTOSConfig.h new file mode 100644 index 000000000..8c39a2fb8 --- /dev/null +++ b/hw/bsp/ra/FreeRTOSConfig/FreeRTOSConfig.h @@ -0,0 +1,180 @@ +/* + * FreeRTOS Kernel V10.0.0 + * Copyright (C) 2017 Amazon.com, Inc. or its affiliates. All Rights Reserved. + * + * Permission is hereby granted, free of charge, to any person obtaining a copy of + * this software and associated documentation files (the "Software"), to deal in + * the Software without restriction, including without limitation the rights to + * use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of + * the Software, and to permit persons to whom the Software is furnished to do so, + * subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in all + * copies or substantial portions of the Software. If you wish to use our Amazon + * FreeRTOS name, please do so in a fair use way that does not cause confusion. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS + * FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR + * COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER + * IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN + * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. + * + * http://www.FreeRTOS.org + * http://aws.amazon.com/freertos + * + * 1 tab == 4 spaces! + */ + + +#ifndef FREERTOS_CONFIG_H +#define FREERTOS_CONFIG_H + +/*----------------------------------------------------------- + * Application specific definitions. + * + * These definitions should be adjusted for your particular hardware and + * application requirements. + * + * THESE PARAMETERS ARE DESCRIBED WITHIN THE 'CONFIGURATION' SECTION OF THE + * FreeRTOS API DOCUMENTATION AVAILABLE ON THE FreeRTOS.org WEB SITE. + * + * See http://www.freertos.org/a00110.html. + *----------------------------------------------------------*/ + +// skip if included from IAR assembler +#ifndef __IASMARM__ + +#ifdef __GNUC__ +#pragma GCC diagnostic push +#pragma GCC diagnostic ignored "-Wstrict-prototypes" +#pragma GCC diagnostic ignored "-Wundef" + +// extra push due to https://github.com/renesas/fsp/pull/278 +#pragma GCC diagnostic push +#endif + +#include "bsp_api.h" + +#ifdef __GNUC__ +#pragma GCC diagnostic pop +#endif + +#endif + +/* Cortex M23/M33 port configuration. */ +#define configENABLE_MPU 0 +#define configENABLE_FPU 1 +#define configENABLE_TRUSTZONE 0 +#define configMINIMAL_SECURE_STACK_SIZE (1024) + +#define configUSE_PREEMPTION 1 +#define configUSE_PORT_OPTIMISED_TASK_SELECTION 0 +#define configCPU_CLOCK_HZ SystemCoreClock +#define configTICK_RATE_HZ ( 1000 ) +#define configMAX_PRIORITIES ( 5 ) +#define configMINIMAL_STACK_SIZE ( 128 ) +#define configTOTAL_HEAP_SIZE ( configSUPPORT_DYNAMIC_ALLOCATION*4*1024 ) +#define configMAX_TASK_NAME_LEN 16 +#define configUSE_16_BIT_TICKS 0 +#define configIDLE_SHOULD_YIELD 1 +#define configUSE_MUTEXES 1 +#define configUSE_RECURSIVE_MUTEXES 1 +#define configUSE_COUNTING_SEMAPHORES 1 +#define configQUEUE_REGISTRY_SIZE 2 +#define configUSE_QUEUE_SETS 0 +#define configUSE_TIME_SLICING 0 +#define configUSE_NEWLIB_REENTRANT 0 +#define configENABLE_BACKWARD_COMPATIBILITY 1 +#define configSTACK_ALLOCATION_FROM_SEPARATE_HEAP 0 + +#define configSUPPORT_STATIC_ALLOCATION 0 +#define configSUPPORT_DYNAMIC_ALLOCATION 1 + +/* Hook function related definitions. */ +#define configUSE_IDLE_HOOK 0 +#define configUSE_TICK_HOOK 0 +#define configUSE_MALLOC_FAILED_HOOK 0 // cause nested extern warning +#define configCHECK_FOR_STACK_OVERFLOW 2 + +/* Run time and task stats gathering related definitions. */ +#define configGENERATE_RUN_TIME_STATS 0 +#define configRECORD_STACK_HIGH_ADDRESS 1 +#define configUSE_TRACE_FACILITY 1 // legacy trace +#define configUSE_STATS_FORMATTING_FUNCTIONS 0 + +/* Co-routine definitions. */ +#define configUSE_CO_ROUTINES 0 +#define configMAX_CO_ROUTINE_PRIORITIES 2 + +/* Software timer related definitions. */ +#define configUSE_TIMERS 1 +#define configTIMER_TASK_PRIORITY (configMAX_PRIORITIES-2) +#define configTIMER_QUEUE_LENGTH 32 +#define configTIMER_TASK_STACK_DEPTH configMINIMAL_STACK_SIZE + +/* Optional functions - most linkers will remove unused functions anyway. */ +#define INCLUDE_vTaskPrioritySet 0 +#define INCLUDE_uxTaskPriorityGet 0 +#define INCLUDE_vTaskDelete 0 +#define INCLUDE_vTaskSuspend 1 // required for queue, semaphore, mutex to be blocked indefinitely with portMAX_DELAY +#define INCLUDE_xResumeFromISR 0 +#define INCLUDE_vTaskDelayUntil 1 +#define INCLUDE_vTaskDelay 1 +#define INCLUDE_xTaskGetSchedulerState 0 +#define INCLUDE_xTaskGetCurrentTaskHandle 1 +#define INCLUDE_uxTaskGetStackHighWaterMark 0 +#define INCLUDE_xTaskGetIdleTaskHandle 0 +#define INCLUDE_xTimerGetTimerDaemonTaskHandle 0 +#define INCLUDE_pcTaskGetTaskName 0 +#define INCLUDE_eTaskGetState 0 +#define INCLUDE_xEventGroupSetBitFromISR 0 +#define INCLUDE_xTimerPendFunctionCall 0 + +/* Define to trap errors during development. */ +// Halt CPU (breakpoint) when hitting error, only apply for Cortex M3, M4, M7 +#if defined(__ARM_ARCH_7M__) || defined (__ARM_ARCH_7EM__) + #define configASSERT(_exp) \ + do {\ + if ( !(_exp) ) { \ + volatile uint32_t* ARM_CM_DHCSR = ((volatile uint32_t*) 0xE000EDF0UL); /* Cortex M CoreDebug->DHCSR */ \ + if ( (*ARM_CM_DHCSR) & 1UL ) { /* Only halt mcu if debugger is attached */ \ + taskDISABLE_INTERRUPTS(); \ + __asm("BKPT #0\n"); \ + }\ + }\ + } while(0) +#else + #define configASSERT( x ) +#endif + +/* FreeRTOS hooks to NVIC vectors */ +#define xPortPendSVHandler PendSV_Handler +#define xPortSysTickHandler SysTick_Handler +#define vPortSVCHandler SVC_Handler + +//--------------------------------------------------------------------+ +// Interrupt nesting behavior configuration. +//--------------------------------------------------------------------+ + +// For Cortex-M specific: __NVIC_PRIO_BITS is defined in mcu header +#define configPRIO_BITS __NVIC_PRIO_BITS + +/* The lowest interrupt priority that can be used in a call to a "set priority" function. */ +#define configLIBRARY_LOWEST_INTERRUPT_PRIORITY ((1< ITCM - - .text : - { - __tz_FLASH_S = ABSOLUTE(FLASH_START); - __ROM_Start = .; - - /* Even though the vector table is not 256 entries (1KB) long, we still allocate that much - * space because ROM registers are at address 0x400 and there is very little space - * in between. */ - KEEP(*(.fixed_vectors*)) - KEEP(*(.application_vectors*)) - __Vectors_End = .; - - /* ROM Registers start at address 0x00000400 for devices that do not have the OPTION_SETTING region. */ - . = OPTION_SETTING_LENGTH > 0 ? . : __ROM_Start + 0x400; - KEEP(*(.rom_registers*)) - - /* Reserving 0x100 bytes of space for ROM registers. */ - . = OPTION_SETTING_LENGTH > 0 ? . : __ROM_Start + 0x500; - - /* Allocate flash write-boundary-aligned - * space for sce9 wrapped public keys for mcuboot if the module is used. - */ - . = ALIGN(128); - KEEP(*(.mcuboot_sce9_key*)) - - *(.text*) - - KEEP(*(.version)) - KEEP(*(.init)) - KEEP(*(.fini)) - - /* .ctors */ - *crtbegin.o(.ctors) - *crtbegin?.o(.ctors) - *(EXCLUDE_FILE(*crtend?.o *crtend.o) .ctors) - *(SORT(.ctors.*)) - *(.ctors) - - /* .dtors */ - *crtbegin.o(.dtors) - *crtbegin?.o(.dtors) - *(EXCLUDE_FILE(*crtend?.o *crtend.o) .dtors) - *(SORT(.dtors.*)) - *(.dtors) - - *(.rodata*) - __usb_dev_descriptor_start_fs = .; - KEEP(*(.usb_device_desc_fs*)) - __usb_cfg_descriptor_start_fs = .; - KEEP(*(.usb_config_desc_fs*)) - __usb_interface_descriptor_start_fs = .; - KEEP(*(.usb_interface_desc_fs*)) - __usb_descriptor_end_fs = .; - __usb_dev_descriptor_start_hs = .; - KEEP(*(.usb_device_desc_hs*)) - __usb_cfg_descriptor_start_hs = .; - KEEP(*(.usb_config_desc_hs*)) - __usb_interface_descriptor_start_hs = .; - KEEP(*(.usb_interface_desc_hs*)) - __usb_descriptor_end_hs = .; - - KEEP(*(.eh_frame*)) - - __ROM_End = .; - } > FLASH = 0xFF - - __Vectors_Size = __Vectors_End - __Vectors; - - .ARM.extab : - { - *(.ARM.extab* .gnu.linkonce.armextab.*) - } > FLASH - - __exidx_start = .; - .ARM.exidx : - { - *(.ARM.exidx* .gnu.linkonce.armexidx.*) - } > FLASH - __exidx_end = .; - - /* To copy multiple ROM to RAM sections, - * uncomment .copy.table section and, - * define __STARTUP_COPY_MULTIPLE in startup_ARMCMx.S */ - /* - .copy.table : - { - . = ALIGN(4); - __copy_table_start__ = .; - LONG (__etext) - LONG (__data_start__) - LONG (__data_end__ - __data_start__) - LONG (__etext2) - LONG (__data2_start__) - LONG (__data2_end__ - __data2_start__) - __copy_table_end__ = .; - } > FLASH - */ - - /* To clear multiple BSS sections, - * uncomment .zero.table section and, - * define __STARTUP_CLEAR_BSS_MULTIPLE in startup_ARMCMx.S */ - /* - .zero.table : - { - . = ALIGN(4); - __zero_table_start__ = .; - LONG (__bss_start__) - LONG (__bss_end__ - __bss_start__) - LONG (__bss2_start__) - LONG (__bss2_end__ - __bss2_start__) - __zero_table_end__ = .; - } > FLASH - */ - - __etext = .; - - __tz_RAM_S = ORIGIN(RAM); - - /* If DTC is used, put the DTC vector table at the start of SRAM. - This avoids memory holes due to 1K alignment required by it. */ - .fsp_dtc_vector_table (NOLOAD) : - { - . = ORIGIN(RAM); - *(.fsp_dtc_vector_table) - } > RAM - - /* Initialized data section. */ - .data : - { - __data_start__ = .; - . = ALIGN(4); - - __Code_In_RAM_Start = .; - - KEEP(*(.code_in_ram*)) - __Code_In_RAM_End = .; - - *(vtable) - /* Don't use *(.data*) because it will place data meant for .data_flash in this section. */ - *(.data.*) - *(.data) - - . = ALIGN(4); - /* preinit data */ - PROVIDE_HIDDEN (__preinit_array_start = .); - KEEP(*(.preinit_array)) - PROVIDE_HIDDEN (__preinit_array_end = .); - - . = ALIGN(4); - /* init data */ - PROVIDE_HIDDEN (__init_array_start = .); - KEEP(*(SORT(.init_array.*))) - KEEP(*(.init_array)) - PROVIDE_HIDDEN (__init_array_end = .); - - - . = ALIGN(4); - /* finit data */ - PROVIDE_HIDDEN (__fini_array_start = .); - KEEP(*(SORT(.fini_array.*))) - KEEP(*(.fini_array)) - PROVIDE_HIDDEN (__fini_array_end = .); - - KEEP(*(.jcr*)) - - . = ALIGN(4); - - /* All data end */ - __data_end__ = .; - - } > RAM AT > FLASH - - /* Start address of the initial values for .dtcm_data. */ - __dtcm_data_init_start = __etext + __data_end__ - __data_start__; - - /* Initialized DTCM data. */ - .dtcm_data : - { - /* Start of DTCM Secure Trustzone region. */ - __tz_DTCM_S = ABSOLUTE(DTCM_START); - - /* Initialized DTCM data start */ - __dtcm_data_start__ = .; - - KEEP(*(.dtcm_data*)) - - /* Initialized DTCM data end */ - __dtcm_data_end__ = .; - } > DTCM AT > FLASH - - /* Uninitialized DTCM data. */ - .dtcm_noinit (NOLOAD): - { - /* Uninitialized DTCM data start */ - __dtcm_noinit_start = .; - - KEEP(*(.dtcm_noinit*)) - - /* Uninitialized DTCM data end */ - __dtcm_noinit_end = .; - - /* - * Start of the DTCM Non-Secure Trustzone region. - * DTCM_NS_START can be used to set a fixed address for non-secure ITCM in secure projects or flat projects. - */ - __tz_DTCM_N = DEFINED(DTCM_NS_START) ? ABSOLUTE(DTCM_NS_START) : ALIGN(__dtcm_noinit_end, 8192); - } > DTCM - - /* TrustZone Secure Gateway Stubs Section. */ - - /* Some arithmetic is needed to eliminate unnecessary FILL for secure projects. */ - /* 1. Get the address to the next block after the .data section in FLASH. */ - DATA_END = LOADADDR(.data) + SIZEOF(.data); - /* 2. Determine the secure gateway stubs address either by the provided linker variable or the next 1024-byte block after .data */ - SGSTUBS_LOC = (DEFINED(PROJECT_SECURE) && DEFINED(FLASH_NSC_START)) ? ABSOLUTE(FLASH_NSC_START) : ALIGN(DATA_END, 1024); - /* 3. Manually specify the start location for .gnu.sgstubs */ - .gnu.sgstubs SGSTUBS_LOC : ALIGN(1024) - { - __tz_FLASH_C = DEFINED(FLASH_NSC_START) ? ABSOLUTE(FLASH_NSC_START) : __RESERVE_NS_RAM ? ABSOLUTE(FLASH_START + FLASH_LENGTH) : ALIGN(1024); - _start_sg = .; - *(.gnu.sgstubs*) - . = ALIGN(32); - _end_sg = .; - } > FLASH - - __tz_FLASH_N = DEFINED(FLASH_NS_START) ? ABSOLUTE(FLASH_NS_START) : __RESERVE_NS_RAM ? ABSOLUTE(FLASH_START + FLASH_LENGTH) : FLASH_LENGTH < 32768 ? FLASH_LENGTH : ALIGN(32768); - FLASH_NS_IMAGE_START = DEFINED(FLASH_NS_IMAGE_START) ? FLASH_NS_IMAGE_START : __tz_FLASH_N; - - /* Note: There are no secure/non-secure boundaries for QSPI. These symbols are provided for the RA configuration tool. */ - __tz_QSPI_FLASH_S = ORIGIN(QSPI_FLASH); - - /* QSPI_FLASH section to be downloaded via debugger */ - .qspi_flash : - { - __qspi_flash_start__ = .; - KEEP(*(.qspi_flash*)) - KEEP(*(.code_in_qspi*)) - __qspi_flash_end__ = .; - } > QSPI_FLASH - __qspi_flash_code_size__ = __qspi_flash_end__ - __qspi_flash_start__; - - /* QSPI_FLASH non-retentive section, creates a copy in internal flash that can be copied to QSPI */ - __qspi_flash_code_addr__ = __etext + (__data_end__ - __data_start__); - .qspi_non_retentive : AT (__qspi_flash_code_addr__) - { - __qspi_non_retentive_start__ = .; - KEEP(*(.qspi_non_retentive*)) - __qspi_non_retentive_end__ = .; - } > QSPI_FLASH - __qspi_non_retentive_size__ = __qspi_non_retentive_end__ - __qspi_non_retentive_start__; - - __qspi_region_max_size__ = 0x4000000; /* Must be the same as defined in MEMORY above */ - __qspi_region_start_address__ = __qspi_flash_start__; - __qspi_region_end_address__ = __qspi_flash_start__ + __qspi_region_max_size__; - - /* Note: There are no secure/non-secure boundaries for QSPI. These symbols are provided for the RA configuration tool. */ - __tz_QSPI_FLASH_N = __qspi_non_retentive_end__; - - /* Support for OctaRAM */ - .OSPI_DEVICE_0_NO_LOAD (NOLOAD): - { - . = ALIGN(4); - __ospi_device_0_start__ = .; - *(.ospi_device_0_no_load*) - . = ALIGN(4); - __ospi_device_0_end__ = .; - } > OSPI_DEVICE_0_RAM - - .OSPI_DEVICE_1_NO_LOAD (NOLOAD): - { - . = ALIGN(4); - __ospi_device_1_start__ = .; - *(.ospi_device_1_no_load*) - . = ALIGN(4); - __ospi_device_1_end__ = .; - } > OSPI_DEVICE_1_RAM - - /* Note: There are no secure/non-secure boundaries for QSPI. These symbols are provided for the RA configuration tool. */ - __tz_OSPI_DEVICE_0_S = ORIGIN(OSPI_DEVICE_0); - - /* OSPI_DEVICE_0 section to be downloaded via debugger */ - .OSPI_DEVICE_0 : - { - __ospi_device_0_start__ = .; - KEEP(*(.ospi_device_0*)) - KEEP(*(.code_in_ospi_device_0*)) - __ospi_device_0_end__ = .; - } > OSPI_DEVICE_0 - __ospi_device_0_code_size__ = __ospi_device_0_end__ - __ospi_device_0_start__; - - /* OSPI_DEVICE_0 non-retentive section, creates a copy in internal flash that can be copied to OSPI */ - __ospi_device_0_code_addr__ = __etext + (__data_end__ - __data_start__); - .ospi_device_0_non_retentive : AT (__ospi_device_0_code_addr__) - { - __ospi_device_0_non_retentive_start__ = .; - KEEP(*(.ospi_device_0_non_retentive*)) - __ospi_device_0_non_retentive_end__ = .; - } > OSPI_DEVICE_0 - __ospi_device_0_non_retentive_size__ = __ospi_device_0_non_retentive_end__ - __ospi_device_0_non_retentive_start__; - - __ospi_device_0_region_max_size__ = 0x8000000; /* Must be the same as defined in MEMORY above */ - __ospi_device_0_region_start_address__ = __ospi_device_0_start__; - __ospi_device_0_region_end_address__ = __ospi_device_0_start__ + __ospi_device_0_region_max_size__; - - /* Note: There are no secure/non-secure boundaries for OSPI. These symbols are provided for the RA configuration tool. */ - __tz_OSPI_DEVICE_0_N = __ospi_device_0_non_retentive_end__; - - /* Note: There are no secure/non-secure boundaries for OSPI. These symbols are provided for the RA configuration tool. */ - __tz_OSPI_DEVICE_1_S = ORIGIN(OSPI_DEVICE_1); - - /* OSPI_DEVICE_1 section to be downloaded via debugger */ - .OSPI_DEVICE_1 : - { - __ospi_device_1_start__ = .; - KEEP(*(.ospi_device_1*)) - KEEP(*(.code_in_ospi_device_1*)) - __ospi_device_1_end__ = .; - } > OSPI_DEVICE_1 - __ospi_device_1_code_size__ = __ospi_device_1_end__ - __ospi_device_1_start__; - - /* OSPI_DEVICE_1 non-retentive section, creates a copy in internal flash that can be copied to OSPI */ - __ospi_device_1_code_addr__ = __etext + (__data_end__ - __data_start__); - .ospi_device_1_non_retentive : AT (__ospi_device_1_code_addr__) - { - __ospi_device_1_non_retentive_start__ = .; - KEEP(*(.ospi_device_1_non_retentive*)) - __ospi_device_1_non_retentive_end__ = .; - } > OSPI_DEVICE_1 - __ospi_device_1_non_retentive_size__ = __ospi_device_1_non_retentive_end__ - __ospi_device_1_non_retentive_start__; - - __ospi_device_1_region_max_size__ = 0x10000000; /* Must be the same as defined in MEMORY above */ - __ospi_device_1_region_start_address__ = __ospi_device_1_start__; - __ospi_device_1_region_end_address__ = __ospi_device_1_start__ + __ospi_device_1_region_max_size__; - - /* Note: There are no secure/non-secure boundaries for OSPI. These symbols are provided for the RA configuration tool. */ - __tz_OSPI_DEVICE_1_N = __ospi_device_1_non_retentive_end__; - - .noinit (NOLOAD): - { - . = ALIGN(4); - __noinit_start = .; - KEEP(*(.noinit*)) - . = ALIGN(8); - /* Place the FreeRTOS heap here so that the __HeapLimit calculation does not include the freertos heap. */ - KEEP(*(.heap.*)) - __noinit_end = .; - } > RAM - - .bss : - { - . = ALIGN(4); - __bss_start__ = .; - *(.bss*) - *(COMMON) - . = ALIGN(4); - __bss_end__ = .; - } > RAM - - .heap (NOLOAD): - { - . = ALIGN(8); - __HeapBase = .; - PROVIDE(end = .); - /* Place the STD heap here. */ - KEEP(*(.heap)) - __HeapLimit = .; - } > RAM - - /* Stacks are stored in this section. */ - .stack_dummy (NOLOAD): - { - . = ALIGN(8); - __StackLimit = .; - /* Main stack */ - KEEP(*(.stack)) - __StackTop = .; - /* Thread stacks */ - KEEP(*(.stack*)) - __StackTopAll = .; - } > RAM - - PROVIDE(__stack = __StackTopAll); - - /* This symbol represents the end of user allocated RAM. The RAM after this symbol can be used - at run time for things such as ThreadX memory pool allocations. */ - __RAM_segment_used_end__ = ALIGN(__StackTopAll , 4); - - /* RAM_NSC_START can be used to set a fixed address for non-secure callable RAM in secure projects. - * If it is not specified, the address for NSC RAM is the end of RAM aligned to a 1K boundary. - * In flat projects that require non-secure RAM, this variable is set to the start of non-secure RAM. */ - __tz_RAM_C = DEFINED(RAM_NSC_START) ? ABSOLUTE(RAM_NSC_START - RAM_NS_BUFFER_BLOCK_LENGTH) : __RESERVE_NS_RAM ? ABSOLUTE(RAM_NS_BUFFER_BLOCK_START) : ALIGN(__RAM_segment_used_end__, 1024); - - /* RAM_NS_START can be used to set a fixed address for non-secure RAM in secure projects or flat projects. - * RAM_NS_BUFFER_BLOCK_LENGTH is used to allocate non-secure buffers in a flat project. If it is not - * specified, the address for NSC RAM is the end of RAM aligned to an 8K boundary. - * In flat projects that require non-secure RAM, this variable is set to the start of non-secure RAM. */ - __tz_RAM_N = DEFINED(RAM_NS_START) ? ABSOLUTE(RAM_NS_START - RAM_NS_BUFFER_BLOCK_LENGTH) : __RESERVE_NS_RAM ? ABSOLUTE(RAM_NS_BUFFER_BLOCK_START) : ALIGN(__tz_RAM_C, 8192); - - /* Non-secure buffers must be in non-secure RAM. This is primarily used for the EDMAC in flat projects. - * The EDMAC is a non-secure bus master and can only access non-secure RAM. */ - .ns_buffer (NOLOAD): - { - /* Allocate RAM on a 32-byte boundary to help with placement of Ethernet buffers. */ - . = __RESERVE_NS_RAM ? ABSOLUTE(RAM_NS_BUFFER_START & 0xFFFFFFE0) : .; - - KEEP(*(.ns_buffer*)) - } > RAM - - /* Data flash. */ - .data_flash : - { - . = ORIGIN(DATA_FLASH); - __tz_DATA_FLASH_S = .; - __Data_Flash_Start = .; - KEEP(*(.data_flash*)) - __Data_Flash_End = .; - - __tz_DATA_FLASH_N = DEFINED(DATA_FLASH_NS_START) ? ABSOLUTE(DATA_FLASH_NS_START) : __RESERVE_NS_RAM ? ABSOLUTE(DATA_FLASH_START + DATA_FLASH_LENGTH) : ALIGN(1024); - } > DATA_FLASH - - /* Note: There are no secure/non-secure boundaries for SDRAM. These symbols are provided for the RA configuration tool. */ - __tz_SDRAM_S = ORIGIN(SDRAM); - - /* SDRAM */ - .sdram (NOLOAD): - { - __SDRAM_Start = .; - KEEP(*(.sdram*)) - KEEP(*(.frame*)) - __SDRAM_End = .; - } > SDRAM - - /* Note: There are no secure/non-secure boundaries for SDRAM. These symbols are provided for the RA configuration tool. */ - __tz_SDRAM_N = __SDRAM_End; - - /* Note: There are no secure/non-secure boundaries for ID_CODE. These symbols are provided for the RA configuration tool. */ - __tz_ID_CODE_S = ORIGIN(ID_CODE); - - .id_code : - { - __ID_Code_Start = .; - KEEP(*(.id_code*)) - __ID_Code_End = .; - } > ID_CODE - - /* Note: There are no secure/non-secure boundaries for ID_CODE. These symbols are provided for the RA configuration tool. */ - __tz_ID_CODE_N = __ID_Code_End; - - /* Symbol required for RA Configuration tool. */ - __tz_OPTION_SETTING_S = ORIGIN(OPTION_SETTING_OFS); - - .option_setting_ofs : - { - __OPTION_SETTING_OFS_Start = .; - KEEP(*(.option_setting_ofs0)) - . = PROJECT_SECURE_OR_FLAT ? __OPTION_SETTING_OFS_Start + 0x04 : __OPTION_SETTING_OFS_Start; - KEEP(*(.option_setting_ofs2)) - . = PROJECT_SECURE_OR_FLAT ? __OPTION_SETTING_OFS_Start + 0x10 : __OPTION_SETTING_OFS_Start; - KEEP(*(.option_setting_dualsel)) - __OPTION_SETTING_OFS_End = .; - } > OPTION_SETTING_OFS = 0xFF - - .option_setting_sas : - { - __OPTION_SETTING_SAS_Start = .; - KEEP(*(.option_setting_sas)) - __OPTION_SETTING_SAS_End = .; - } > OPTION_SETTING_SAS = 0xFF - - /* Symbol required for RA Configuration tool. */ - __tz_OPTION_SETTING_N = ABSOLUTE(OPTION_SETTING_START_NS); - - .option_setting_ns : - { - __OPTION_SETTING_NS_Start = .; - KEEP(*(.option_setting_ofs1)) - . = USE_OPTION_SETTING_NS ? __OPTION_SETTING_NS_Start + 0x04 : __OPTION_SETTING_NS_Start; - KEEP(*(.option_setting_ofs3)) - . = USE_OPTION_SETTING_NS ? __OPTION_SETTING_NS_Start + 0x10 : __OPTION_SETTING_NS_Start; - KEEP(*(.option_setting_banksel)) - . = USE_OPTION_SETTING_NS ? __OPTION_SETTING_NS_Start + 0x40 : __OPTION_SETTING_NS_Start; - KEEP(*(.option_setting_bps0)) - . = USE_OPTION_SETTING_NS ? __OPTION_SETTING_NS_Start + 0x44 : __OPTION_SETTING_NS_Start; - KEEP(*(.option_setting_bps1)) - . = USE_OPTION_SETTING_NS ? __OPTION_SETTING_NS_Start + 0x48 : __OPTION_SETTING_NS_Start; - KEEP(*(.option_setting_bps2)) - . = USE_OPTION_SETTING_NS ? __OPTION_SETTING_NS_Start + 0x4C : __OPTION_SETTING_NS_Start; - KEEP(*(.option_setting_bps3)) - . = USE_OPTION_SETTING_NS ? __OPTION_SETTING_NS_Start + 0x60 : __OPTION_SETTING_NS_Start; - KEEP(*(.option_setting_pbps0)) - . = USE_OPTION_SETTING_NS ? __OPTION_SETTING_NS_Start + 0x64 : __OPTION_SETTING_NS_Start; - KEEP(*(.option_setting_pbps1)) - . = USE_OPTION_SETTING_NS ? __OPTION_SETTING_NS_Start + 0x68 : __OPTION_SETTING_NS_Start; - KEEP(*(.option_setting_pbps2)) - . = USE_OPTION_SETTING_NS ? __OPTION_SETTING_NS_Start + 0x6C : __OPTION_SETTING_NS_Start; - KEEP(*(.option_setting_pbps3)) - __OPTION_SETTING_NS_End = .; - } > OPTION_SETTING = 0xFF - - /* Symbol required for RA Configuration tool. */ - __tz_OPTION_SETTING_S_S = ORIGIN(OPTION_SETTING_S); - - .option_setting_s : - { - __OPTION_SETTING_S_Start = .; - KEEP(*(.option_setting_ofs1_sec)) - . = PROJECT_SECURE_OR_FLAT ? __OPTION_SETTING_S_Start + 0x04 : __OPTION_SETTING_S_Start; - KEEP(*(.option_setting_ofs3_sec)) - . = PROJECT_SECURE_OR_FLAT ? __OPTION_SETTING_S_Start + 0x10 : __OPTION_SETTING_S_Start; - KEEP(*(.option_setting_banksel_sec)) - . = PROJECT_SECURE_OR_FLAT ? __OPTION_SETTING_S_Start + 0x40 : __OPTION_SETTING_S_Start; - KEEP(*(.option_setting_bps_sec0)) - . = PROJECT_SECURE_OR_FLAT ? __OPTION_SETTING_S_Start + 0x44 : __OPTION_SETTING_S_Start; - KEEP(*(.option_setting_bps_sec1)) - . = PROJECT_SECURE_OR_FLAT ? __OPTION_SETTING_S_Start + 0x48 : __OPTION_SETTING_S_Start; - KEEP(*(.option_setting_bps_sec2)) - . = PROJECT_SECURE_OR_FLAT ? __OPTION_SETTING_S_Start + 0x4C : __OPTION_SETTING_S_Start; - KEEP(*(.option_setting_bps_sec3)) - . = PROJECT_SECURE_OR_FLAT ? __OPTION_SETTING_S_Start + 0x60 : __OPTION_SETTING_S_Start; - KEEP(*(.option_setting_pbps_sec0)) - . = PROJECT_SECURE_OR_FLAT ? __OPTION_SETTING_S_Start + 0x64 : __OPTION_SETTING_S_Start; - KEEP(*(.option_setting_pbps_sec1)) - . = PROJECT_SECURE_OR_FLAT ? __OPTION_SETTING_S_Start + 0x68 : __OPTION_SETTING_S_Start; - KEEP(*(.option_setting_pbps_sec2)) - . = PROJECT_SECURE_OR_FLAT ? __OPTION_SETTING_S_Start + 0x6C : __OPTION_SETTING_S_Start; - KEEP(*(.option_setting_pbps_sec3)) - . = PROJECT_SECURE_OR_FLAT ? __OPTION_SETTING_S_Start + 0x80 : __OPTION_SETTING_S_Start; - KEEP(*(.option_setting_ofs1_sel)) - . = PROJECT_SECURE_OR_FLAT ? __OPTION_SETTING_S_Start + 0x84 : __OPTION_SETTING_S_Start; - KEEP(*(.option_setting_ofs3_sel)) - . = PROJECT_SECURE_OR_FLAT ? __OPTION_SETTING_S_Start + 0x90 : __OPTION_SETTING_S_Start; - KEEP(*(.option_setting_banksel_sel)) - . = PROJECT_SECURE_OR_FLAT ? __OPTION_SETTING_S_Start + 0xC0 : __OPTION_SETTING_S_Start; - KEEP(*(.option_setting_bps_sel0)) - . = PROJECT_SECURE_OR_FLAT ? __OPTION_SETTING_S_Start + 0xC4 : __OPTION_SETTING_S_Start; - KEEP(*(.option_setting_bps_sel1)) - . = PROJECT_SECURE_OR_FLAT ? __OPTION_SETTING_S_Start + 0xC8 : __OPTION_SETTING_S_Start; - KEEP(*(.option_setting_bps_sel2)) - . = PROJECT_SECURE_OR_FLAT ? __OPTION_SETTING_S_Start + 0xCC : __OPTION_SETTING_S_Start; - KEEP(*(.option_setting_bps_sel3)) - __OPTION_SETTING_S_End = .; - } > OPTION_SETTING_S = 0xFF - - /* Symbol required for RA Configuration tool. */ - __tz_OPTION_SETTING_S_N = __OPTION_SETTING_S_End; -} diff --git a/hw/bsp/ra/boards/ra4m3_ek/board.cmake b/hw/bsp/ra/boards/ra4m3_ek/board.cmake index 241b659a0..637e99db6 100644 --- a/hw/bsp/ra/boards/ra4m3_ek/board.cmake +++ b/hw/bsp/ra/boards/ra4m3_ek/board.cmake @@ -3,13 +3,8 @@ set(MCU_VARIANT ra4m3) set(JLINK_DEVICE R7FA4M3AF) -set(LD_FILE_GNU ${CMAKE_CURRENT_LIST_DIR}/ra4m3_ek.ld) - function(update_board TARGET) - target_compile_definitions(${TARGET} PUBLIC - ) - target_sources(${TARGET} PRIVATE - ) - target_include_directories(${BOARD_TARGET} PUBLIC - ) + target_compile_definitions(${TARGET} PUBLIC) + target_sources(${TARGET} PRIVATE) + target_include_directories(${BOARD_TARGET} PUBLIC) endfunction() diff --git a/hw/bsp/ra/boards/ra4m3_ek/board.mk b/hw/bsp/ra/boards/ra4m3_ek/board.mk index 266de7c0d..f2d0ecfc5 100644 --- a/hw/bsp/ra/boards/ra4m3_ek/board.mk +++ b/hw/bsp/ra/boards/ra4m3_ek/board.mk @@ -1,11 +1,6 @@ CPU_CORE = cortex-m33 MCU_VARIANT = ra4m3 -FSP_BOARD_DIR = hw/mcu/renesas/fsp/ra/board/ra4m3_ek - -# All source paths should be relative to the top level. -LD_FILE = $(BOARD_PATH)/ra4m3_ek.ld - # For flash-jlink target JLINK_DEVICE = R7FA4M3AF JLINK_IF = SWD diff --git a/hw/bsp/ra/boards/ra4m3_ek/ra4m3_ek.ld b/hw/bsp/ra/boards/ra4m3_ek/ra4m3_ek.ld deleted file mode 100644 index 520b44cc6..000000000 --- a/hw/bsp/ra/boards/ra4m3_ek/ra4m3_ek.ld +++ /dev/null @@ -1,576 +0,0 @@ -/* generated memory regions file - do not edit */ -RAM_START = 0x20000000; -RAM_LENGTH = 0x20000; -FLASH_START = 0x00000000; -FLASH_LENGTH = 0x100000; -DATA_FLASH_START = 0x08000000; -DATA_FLASH_LENGTH = 0x2000; -OPTION_SETTING_START = 0x0100A100; -OPTION_SETTING_LENGTH = 0x100; -OPTION_SETTING_S_START = 0x0100A200; -OPTION_SETTING_S_LENGTH = 0x100; -ID_CODE_START = 0x00000000; -ID_CODE_LENGTH = 0x0; -SDRAM_START = 0x90000000; -SDRAM_LENGTH = 0x0; -QSPI_FLASH_START = 0x60000000; -QSPI_FLASH_LENGTH = 0x4000000; -OSPI_DEVICE_0_START = 0x68000000; -OSPI_DEVICE_0_LENGTH = 0x0; -OSPI_DEVICE_1_START = 0x70000000; -OSPI_DEVICE_1_LENGTH = 0x0; - -/* - Linker File for Renesas FSP -*/ - -QSPI_FLASH_PRV_LENGTH = DEFINED(QSPI_FLASH_SIZE) ? ABSOLUTE(QSPI_FLASH_SIZE) : ABSOLUTE(QSPI_FLASH_LENGTH); -OSPI_DEVICE_0_PRV_LENGTH = DEFINED(OSPI_DEVICE_0_SIZE) ? ABSOLUTE(OSPI_DEVICE_0_SIZE) : ABSOLUTE(OSPI_DEVICE_0_LENGTH); -OSPI_DEVICE_1_PRV_LENGTH = DEFINED(OSPI_DEVICE_1_SIZE) ? ABSOLUTE(OSPI_DEVICE_1_SIZE) : ABSOLUTE(OSPI_DEVICE_1_LENGTH); - -/* This is a non-secure project if the OPTION_SETTING region is non-zero and it does not start at the base address for - * secure option settings (meaning the secure option settings were already allocated in the secure project). */ -__TZ_NS_PROJECT = LENGTH(OPTION_SETTING) && DEFINED(OPTION_SETTING_S_START) && (ABSOLUTE(OPTION_SETTING_START_S) != ORIGIN(OPTION_SETTING)); - -/* This is a secure project if the option setting base address matches the option setting base address for secure - * option settings. This is also set for flat projects because the CPU runs in secure mode for flat projects. - * This is not defined for projects that do not support TrustZone. */ -__TZ_S_PROJECT = LENGTH(OPTION_SETTING) && DEFINED(OPTION_SETTING_S_START) && (ABSOLUTE(OPTION_SETTING_START_S) == ORIGIN(OPTION_SETTING)); - -/* If a flat (secure) project has defined RAM_NS_BUFFER_LENGTH, then emit IDAU symbols to allocate non-secure RAM. */ -__RESERVE_NS_RAM = __TZ_S_PROJECT && DEFINED(RAM_NS_BUFFER_LENGTH); - -RAM_NS_BUFFER_BLOCK_LENGTH = DEFINED(RAM_NS_BUFFER_LENGTH) ? ALIGN(RAM_NS_BUFFER_LENGTH, 8192) : 0; -RAM_NS_BUFFER_LENGTH = DEFINED(RAM_NS_BUFFER_LENGTH) ? RAM_NS_BUFFER_LENGTH : 0; -RAM_NS_BUFFER_START = RAM_START + RAM_LENGTH - RAM_NS_BUFFER_LENGTH; -RAM_NS_BUFFER_BLOCK_START = RAM_START + RAM_LENGTH - RAM_NS_BUFFER_BLOCK_LENGTH; - -/* Define memory regions. */ -MEMORY -{ - FLASH (rx) : ORIGIN = FLASH_START, LENGTH = FLASH_LENGTH - RAM (rwx) : ORIGIN = RAM_START, LENGTH = RAM_LENGTH - DATA_FLASH (rx) : ORIGIN = DATA_FLASH_START, LENGTH = DATA_FLASH_LENGTH - QSPI_FLASH (rx) : ORIGIN = QSPI_FLASH_START, LENGTH = QSPI_FLASH_PRV_LENGTH - OSPI_DEVICE_0 (rx) : ORIGIN = OSPI_DEVICE_0_START, LENGTH = OSPI_DEVICE_0_PRV_LENGTH - OSPI_DEVICE_1 (rx) : ORIGIN = OSPI_DEVICE_1_START, LENGTH = OSPI_DEVICE_1_PRV_LENGTH - SDRAM (rwx) : ORIGIN = SDRAM_START, LENGTH = SDRAM_LENGTH - OPTION_SETTING (r): ORIGIN = OPTION_SETTING_START, LENGTH = OPTION_SETTING_LENGTH - OPTION_SETTING_S (r): ORIGIN = OPTION_SETTING_S_START, LENGTH = OPTION_SETTING_S_LENGTH - ID_CODE (rx) : ORIGIN = ID_CODE_START, LENGTH = ID_CODE_LENGTH -} - -OPTION_SETTING_START_NS = 0x0100A180; -OPTION_SETTING_START_S = 0x0100A100; - -/* Library configurations */ -GROUP(libgcc.a libc.a libm.a libnosys.a) - -/* Linker script to place sections and symbol values. Should be used together - * with other linker script that defines memory regions FLASH and RAM. - * It references following symbols, which must be defined in code: - * Reset_Handler : Entry of reset handler - * - * It defines following symbols, which code can use without definition: - * __exidx_start - * __exidx_end - * __copy_table_start__ - * __copy_table_end__ - * __zero_table_start__ - * __zero_table_end__ - * __etext - * __data_start__ - * __preinit_array_start - * __preinit_array_end - * __init_array_start - * __init_array_end - * __fini_array_start - * __fini_array_end - * __data_end__ - * __bss_start__ - * __bss_end__ - * __HeapLimit - * __StackLimit - * __StackTop - * __stack - * __Vectors_End - * __Vectors_Size - * __qspi_flash_start__ - * __qspi_flash_end__ - * __qspi_flash_code_size__ - * __qspi_region_max_size__ - * __qspi_region_start_address__ - * __qspi_region_end_address__ - * __ospi_device_0_start__ - * __ospi_device_0_end__ - * __ospi_device_0_code_size__ - * __ospi_device_0_region_max_size__ - * __ospi_device_0_region_start_address__ - * __ospi_device_0_region_end_address__ - * __ospi_device_1_start__ - * __ospi_device_1_end__ - * __ospi_device_1_code_size__ - * __ospi_device_1_region_max_size__ - * __ospi_device_1_region_start_address__ - * __ospi_device_1_region_end_address__ - */ -ENTRY(Reset_Handler) - -SECTIONS -{ - .text : - { - __tz_FLASH_S = ABSOLUTE(FLASH_START); - __ROM_Start = .; - - /* Even though the vector table is not 256 entries (1KB) long, we still allocate that much - * space because ROM registers are at address 0x400 and there is very little space - * in between. */ - KEEP(*(.fixed_vectors*)) - KEEP(*(.application_vectors*)) - __Vectors_End = .; - - /* ROM Registers start at address 0x00000400 */ - . = __ROM_Start + 0x400; - KEEP(*(.rom_registers*)) - - /* Reserving 0x100 bytes of space for ROM registers. */ - . = __ROM_Start + 0x500; - - *(.text*) - - KEEP(*(.version)) - KEEP(*(.init)) - KEEP(*(.fini)) - - /* .ctors */ - *crtbegin.o(.ctors) - *crtbegin?.o(.ctors) - *(EXCLUDE_FILE(*crtend?.o *crtend.o) .ctors) - *(SORT(.ctors.*)) - *(.ctors) - - /* .dtors */ - *crtbegin.o(.dtors) - *crtbegin?.o(.dtors) - *(EXCLUDE_FILE(*crtend?.o *crtend.o) .dtors) - *(SORT(.dtors.*)) - *(.dtors) - - *(.rodata*) - __usb_dev_descriptor_start_fs = .; - KEEP(*(.usb_device_desc_fs*)) - __usb_cfg_descriptor_start_fs = .; - KEEP(*(.usb_config_desc_fs*)) - __usb_interface_descriptor_start_fs = .; - KEEP(*(.usb_interface_desc_fs*)) - __usb_descriptor_end_fs = .; - __usb_dev_descriptor_start_hs = .; - KEEP(*(.usb_device_desc_hs*)) - __usb_cfg_descriptor_start_hs = .; - KEEP(*(.usb_config_desc_hs*)) - __usb_interface_descriptor_start_hs = .; - KEEP(*(.usb_interface_desc_hs*)) - __usb_descriptor_end_hs = .; - - KEEP(*(.eh_frame*)) - - __ROM_End = .; - } > FLASH = 0xFF - - __Vectors_Size = __Vectors_End - __Vectors; - - .ARM.extab : - { - *(.ARM.extab* .gnu.linkonce.armextab.*) - } > FLASH - - __exidx_start = .; - .ARM.exidx : - { - *(.ARM.exidx* .gnu.linkonce.armexidx.*) - } > FLASH - __exidx_end = .; - - /* To copy multiple ROM to RAM sections, - * uncomment .copy.table section and, - * define __STARTUP_COPY_MULTIPLE in startup_ARMCMx.S */ - /* - .copy.table : - { - . = ALIGN(4); - __copy_table_start__ = .; - LONG (__etext) - LONG (__data_start__) - LONG (__data_end__ - __data_start__) - LONG (__etext2) - LONG (__data2_start__) - LONG (__data2_end__ - __data2_start__) - __copy_table_end__ = .; - } > FLASH - */ - - /* To clear multiple BSS sections, - * uncomment .zero.table section and, - * define __STARTUP_CLEAR_BSS_MULTIPLE in startup_ARMCMx.S */ - /* - .zero.table : - { - . = ALIGN(4); - __zero_table_start__ = .; - LONG (__bss_start__) - LONG (__bss_end__ - __bss_start__) - LONG (__bss2_start__) - LONG (__bss2_end__ - __bss2_start__) - __zero_table_end__ = .; - } > FLASH - */ - - __etext = .; - - __tz_RAM_S = ORIGIN(RAM); - - /* If DTC is used, put the DTC vector table at the start of SRAM. - This avoids memory holes due to 1K alignment required by it. */ - .fsp_dtc_vector_table (NOLOAD) : - { - . = ORIGIN(RAM); - *(.fsp_dtc_vector_table) - } > RAM - - /* Initialized data section. */ - .data : - { - __data_start__ = .; - . = ALIGN(4); - - __Code_In_RAM_Start = .; - - KEEP(*(.code_in_ram*)) - __Code_In_RAM_End = .; - - *(vtable) - /* Don't use *(.data*) because it will place data meant for .data_flash in this section. */ - *(.data.*) - *(.data) - - . = ALIGN(4); - /* preinit data */ - PROVIDE_HIDDEN (__preinit_array_start = .); - KEEP(*(.preinit_array)) - PROVIDE_HIDDEN (__preinit_array_end = .); - - . = ALIGN(4); - /* init data */ - PROVIDE_HIDDEN (__init_array_start = .); - KEEP(*(SORT(.init_array.*))) - KEEP(*(.init_array)) - PROVIDE_HIDDEN (__init_array_end = .); - - - . = ALIGN(4); - /* finit data */ - PROVIDE_HIDDEN (__fini_array_start = .); - KEEP(*(SORT(.fini_array.*))) - KEEP(*(.fini_array)) - PROVIDE_HIDDEN (__fini_array_end = .); - - KEEP(*(.jcr*)) - - . = ALIGN(4); - - /* All data end */ - __data_end__ = .; - - } > RAM AT > FLASH - - - /* TrustZone Secure Gateway Stubs Section. */ - .gnu.sgstubs : ALIGN (1024) - { - . = DEFINED(FLASH_NSC_START) ? ABSOLUTE(FLASH_NSC_START) : ALIGN(1024); - __tz_FLASH_C = DEFINED(FLASH_NSC_START) ? ABSOLUTE(FLASH_NSC_START) : __RESERVE_NS_RAM ? ABSOLUTE(FLASH_START + FLASH_LENGTH) : ALIGN(1024); - _start_sg = .; - *(.gnu.sgstubs*) - . = ALIGN(32); - _end_sg = .; - } > FLASH - - __tz_FLASH_N = DEFINED(FLASH_NS_START) ? ABSOLUTE(FLASH_NS_START) : __RESERVE_NS_RAM ? ABSOLUTE(FLASH_START + FLASH_LENGTH) : ALIGN(32768); - - /* Note: There are no secure/non-secure boundaries for QSPI. These symbols are provided for the RA configuration tool. */ - __tz_QSPI_FLASH_S = ORIGIN(QSPI_FLASH); - - /* QSPI_FLASH section to be downloaded via debugger */ - .qspi_flash : - { - __qspi_flash_start__ = .; - KEEP(*(.qspi_flash*)) - KEEP(*(.code_in_qspi*)) - __qspi_flash_end__ = .; - } > QSPI_FLASH - __qspi_flash_code_size__ = __qspi_flash_end__ - __qspi_flash_start__; - - /* QSPI_FLASH non-retentive section, creates a copy in internal flash that can be copied to QSPI */ - __qspi_flash_code_addr__ = __etext + (__data_end__ - __data_start__); - .qspi_non_retentive : AT (__qspi_flash_code_addr__) - { - __qspi_non_retentive_start__ = .; - KEEP(*(.qspi_non_retentive*)) - __qspi_non_retentive_end__ = .; - } > QSPI_FLASH - __qspi_non_retentive_size__ = __qspi_non_retentive_end__ - __qspi_non_retentive_start__; - - __qspi_region_max_size__ = 0x4000000; /* Must be the same as defined in MEMORY above */ - __qspi_region_start_address__ = __qspi_flash_start__; - __qspi_region_end_address__ = __qspi_flash_start__ + __qspi_region_max_size__; - - /* Note: There are no secure/non-secure boundaries for QSPI. These symbols are provided for the RA configuration tool. */ - __tz_QSPI_FLASH_N = __qspi_non_retentive_end__; - - /* Note: There are no secure/non-secure boundaries for QSPI. These symbols are provided for the RA configuration tool. */ - __tz_OSPI_DEVICE_0_S = ORIGIN(OSPI_DEVICE_0); - - /* OSPI_DEVICE_0 section to be downloaded via debugger */ - .OSPI_DEVICE_0 : - { - __ospi_device_0_start__ = .; - KEEP(*(.ospi_device_0*)) - KEEP(*(.code_in_ospi_device_0*)) - __ospi_device_0_end__ = .; - } > OSPI_DEVICE_0 - __ospi_device_0_code_size__ = __ospi_device_0_end__ - __ospi_device_0_start__; - - /* OSPI_DEVICE_0 non-retentive section, creates a copy in internal flash that can be copied to OSPI */ - __ospi_device_0_code_addr__ = __etext + (__data_end__ - __data_start__); - .ospi_device_0_non_retentive : AT (__ospi_device_0_code_addr__) - { - __ospi_device_0_non_retentive_start__ = .; - KEEP(*(.ospi_device_0_non_retentive*)) - __ospi_device_0_non_retentive_end__ = .; - } > OSPI_DEVICE_0 - __ospi_device_0_non_retentive_size__ = __ospi_device_0_non_retentive_end__ - __ospi_device_0_non_retentive_start__; - - __ospi_device_0_region_max_size__ = 0x8000000; /* Must be the same as defined in MEMORY above */ - __ospi_device_0_region_start_address__ = __ospi_device_0_start__; - __ospi_device_0_region_end_address__ = __ospi_device_0_start__ + __ospi_device_0_region_max_size__; - - /* Note: There are no secure/non-secure boundaries for OSPI. These symbols are provided for the RA configuration tool. */ - __tz_OSPI_DEVICE_0_N = __ospi_device_0_non_retentive_end__; - - /* Note: There are no secure/non-secure boundaries for OSPI. These symbols are provided for the RA configuration tool. */ - __tz_OSPI_DEVICE_1_S = ORIGIN(OSPI_DEVICE_1); - - /* OSPI_DEVICE_1 section to be downloaded via debugger */ - .OSPI_DEVICE_1 : - { - __ospi_device_1_start__ = .; - KEEP(*(.ospi_device_1*)) - KEEP(*(.code_in_ospi_device_1*)) - __ospi_device_1_end__ = .; - } > OSPI_DEVICE_1 - __ospi_device_1_code_size__ = __ospi_device_1_end__ - __ospi_device_1_start__; - - /* OSPI_DEVICE_1 non-retentive section, creates a copy in internal flash that can be copied to OSPI */ - __ospi_device_1_code_addr__ = __etext + (__data_end__ - __data_start__); - .ospi_device_1_non_retentive : AT (__ospi_device_1_code_addr__) - { - __ospi_device_1_non_retentive_start__ = .; - KEEP(*(.ospi_device_1_non_retentive*)) - __ospi_device_1_non_retentive_end__ = .; - } > OSPI_DEVICE_1 - __ospi_device_1_non_retentive_size__ = __ospi_device_1_non_retentive_end__ - __ospi_device_1_non_retentive_start__; - - __ospi_device_1_region_max_size__ = 0x10000000; /* Must be the same as defined in MEMORY above */ - __ospi_device_1_region_start_address__ = __ospi_device_1_start__; - __ospi_device_1_region_end_address__ = __ospi_device_1_start__ + __ospi_device_1_region_max_size__; - - /* Note: There are no secure/non-secure boundaries for OSPI. These symbols are provided for the RA configuration tool. */ - __tz_OSPI_DEVICE_1_N = __ospi_device_1_non_retentive_end__; - - .noinit (NOLOAD): - { - . = ALIGN(4); - __noinit_start = .; - KEEP(*(.noinit*)) - . = ALIGN(8); - /* Place the FreeRTOS heap here so that the __HeapLimit calculation does not include the freertos heap. */ - KEEP(*(.heap.*)) - __noinit_end = .; - } > RAM - - .bss : - { - . = ALIGN(4); - __bss_start__ = .; - *(.bss*) - *(COMMON) - . = ALIGN(4); - __bss_end__ = .; - } > RAM - - .heap (NOLOAD): - { - . = ALIGN(8); - __HeapBase = .; - PROVIDE(end = .); - /* Place the STD heap here. */ - KEEP(*(.heap)) - __HeapLimit = .; - } > RAM - - /* Stacks are stored in this section. */ - .stack_dummy (NOLOAD): - { - . = ALIGN(8); - __StackLimit = .; - /* Main stack */ - KEEP(*(.stack)) - __StackTop = .; - /* Thread stacks */ - KEEP(*(.stack*)) - __StackTopAll = .; - } > RAM - - PROVIDE(__stack = __StackTopAll); - - /* This symbol represents the end of user allocated RAM. The RAM after this symbol can be used - at run time for things such as ThreadX memory pool allocations. */ - __RAM_segment_used_end__ = ALIGN(__StackTopAll , 4); - - /* RAM_NSC_START can be used to set a fixed address for non-secure callable RAM in secure projects. - * If it is not specified, the address for NSC RAM is the end of RAM aligned to a 1K boundary. - * In flat projects that require non-secure RAM, this variable is set to the start of non-secure RAM. */ - __tz_RAM_C = DEFINED(RAM_NSC_START) ? ABSOLUTE(RAM_NSC_START) : __RESERVE_NS_RAM ? ABSOLUTE(RAM_NS_BUFFER_BLOCK_START) : ALIGN(__RAM_segment_used_end__, 1024); - - /* RAM_NS_START can be used to set a fixed address for non-secure RAM in secure projects or flat projects. - * RAM_NS_BUFFER_BLOCK_LENGTH is used to allocate non-secure buffers in a flat project. If it is not - * specified, the address for NSC RAM is the end of RAM aligned to an 8K boundary. - * In flat projects that require non-secure RAM, this variable is set to the start of non-secure RAM. */ - __tz_RAM_N = DEFINED(RAM_NS_START) ? ABSOLUTE(RAM_NS_START) : __RESERVE_NS_RAM ? ABSOLUTE(RAM_NS_BUFFER_BLOCK_START) : ALIGN(__tz_RAM_C, 8192); - - /* Non-secure buffers must be in non-secure RAM. This is primarily used for the EDMAC in flat projects. - * The EDMAC is a non-secure bus master and can only access non-secure RAM. */ - .ns_buffer (NOLOAD): - { - /* Allocate RAM on a 32-byte boundary to help with placement of Ethernet buffers. */ - . = __RESERVE_NS_RAM ? ABSOLUTE(RAM_NS_BUFFER_START & 0xFFFFFFE0) : .; - - KEEP(*(.ns_buffer*)) - } > RAM - - /* Data flash. */ - .data_flash : - { - . = ORIGIN(DATA_FLASH); - __tz_DATA_FLASH_S = .; - __Data_Flash_Start = .; - KEEP(*(.data_flash*)) - __Data_Flash_End = .; - - __tz_DATA_FLASH_N = DEFINED(DATA_FLASH_NS_START) ? ABSOLUTE(DATA_FLASH_NS_START) : __RESERVE_NS_RAM ? ABSOLUTE(DATA_FLASH_START + DATA_FLASH_LENGTH) : ALIGN(1024); - } > DATA_FLASH - - /* Note: There are no secure/non-secure boundaries for SDRAM. These symbols are provided for the RA configuration tool. */ - __tz_SDRAM_S = ORIGIN(SDRAM); - - /* SDRAM */ - .sdram (NOLOAD): - { - __SDRAM_Start = .; - KEEP(*(.sdram*)) - KEEP(*(.frame*)) - __SDRAM_End = .; - } > SDRAM - - /* Note: There are no secure/non-secure boundaries for SDRAM. These symbols are provided for the RA configuration tool. */ - __tz_SDRAM_N = __SDRAM_End; - - /* Note: There are no secure/non-secure boundaries for ID_CODE. These symbols are provided for the RA configuration tool. */ - __tz_ID_CODE_S = ORIGIN(ID_CODE); - - .id_code : - { - __ID_Code_Start = .; - KEEP(*(.id_code*)) - __ID_Code_End = .; - } > ID_CODE - - /* Note: There are no secure/non-secure boundaries for ID_CODE. These symbols are provided for the RA configuration tool. */ - __tz_ID_CODE_N = __ID_Code_End; - - /* Symbol required for RA Configuration tool. */ - __tz_OPTION_SETTING_S = ORIGIN(OPTION_SETTING); - - .option_setting : - { - __OPTION_SETTING_Start = .; - KEEP(*(.option_setting_ofs0)) - . = __TZ_S_PROJECT ? __OPTION_SETTING_Start + 0x10 : __OPTION_SETTING_Start; - KEEP(*(.option_setting_dualsel)) - . = __TZ_S_PROJECT ? __OPTION_SETTING_Start + 0x34 : __OPTION_SETTING_Start; - KEEP(*(.option_setting_sas)) - __OPTION_SETTING_End = .; - } > OPTION_SETTING = 0xFF - - /* Symbol required for RA Configuration tool. */ - __tz_OPTION_SETTING_N = OPTION_SETTING_START_NS; - - .option_setting_ns : - { - __OPTION_SETTING_NS_Start = .; - KEEP(*(.option_setting_ofs1)) - . = __TZ_NS_PROJECT ? __OPTION_SETTING_NS_Start + 0x10 : __OPTION_SETTING_NS_Start; - KEEP(*(.option_setting_banksel)) - . = __TZ_NS_PROJECT ? __OPTION_SETTING_NS_Start + 0x40 : __OPTION_SETTING_NS_Start; - KEEP(*(.option_setting_bps0)) - . = __TZ_NS_PROJECT ? __OPTION_SETTING_NS_Start + 0x44 : __OPTION_SETTING_NS_Start; - KEEP(*(.option_setting_bps1)) - . = __TZ_NS_PROJECT ? __OPTION_SETTING_NS_Start + 0x48 : __OPTION_SETTING_NS_Start; - KEEP(*(.option_setting_bps2)) - . = __TZ_NS_PROJECT ? __OPTION_SETTING_NS_Start + 0x60 : __OPTION_SETTING_NS_Start; - KEEP(*(.option_setting_pbps0)) - . = __TZ_NS_PROJECT ? __OPTION_SETTING_NS_Start + 0x64 : __OPTION_SETTING_NS_Start; - KEEP(*(.option_setting_pbps1)) - . = __TZ_NS_PROJECT ? __OPTION_SETTING_NS_Start + 0x68 : __OPTION_SETTING_NS_Start; - KEEP(*(.option_setting_pbps2)) - __OPTION_SETTING_NS_End = .; - } > OPTION_SETTING = 0xFF - - /* Symbol required for RA Configuration tool. */ - __tz_OPTION_SETTING_S_S = ORIGIN(OPTION_SETTING_S); - - .option_setting_s : - { - __OPTION_SETTING_S_Start = .; - KEEP(*(.option_setting_ofs1_sec)) - . = __TZ_S_PROJECT ? __OPTION_SETTING_S_Start + 0x10 : __OPTION_SETTING_S_Start; - KEEP(*(.option_setting_banksel_sec)) - . = __TZ_S_PROJECT ? __OPTION_SETTING_S_Start + 0x40 : __OPTION_SETTING_S_Start; - KEEP(*(.option_setting_bps_sec0)) - . = __TZ_S_PROJECT ? __OPTION_SETTING_S_Start + 0x44 : __OPTION_SETTING_S_Start; - KEEP(*(.option_setting_bps_sec1)) - . = __TZ_S_PROJECT ? __OPTION_SETTING_S_Start + 0x48 : __OPTION_SETTING_S_Start; - KEEP(*(.option_setting_bps_sec2)) - . = __TZ_S_PROJECT ? __OPTION_SETTING_S_Start + 0x60 : __OPTION_SETTING_S_Start; - KEEP(*(.option_setting_pbps_sec0)) - . = __TZ_S_PROJECT ? __OPTION_SETTING_S_Start + 0x64 : __OPTION_SETTING_S_Start; - KEEP(*(.option_setting_pbps_sec1)) - . = __TZ_S_PROJECT ? __OPTION_SETTING_S_Start + 0x68 : __OPTION_SETTING_S_Start; - KEEP(*(.option_setting_pbps_sec2)) - . = __TZ_S_PROJECT ? __OPTION_SETTING_S_Start + 0x80 : __OPTION_SETTING_S_Start; - KEEP(*(.option_setting_ofs1_sel)) - . = __TZ_S_PROJECT ? __OPTION_SETTING_S_Start + 0x90 : __OPTION_SETTING_S_Start; - KEEP(*(.option_setting_banksel_sel)) - . = __TZ_S_PROJECT ? __OPTION_SETTING_S_Start + 0xC0 : __OPTION_SETTING_S_Start; - KEEP(*(.option_setting_bps_sel0)) - . = __TZ_S_PROJECT ? __OPTION_SETTING_S_Start + 0xC4 : __OPTION_SETTING_S_Start; - KEEP(*(.option_setting_bps_sel1)) - . = __TZ_S_PROJECT ? __OPTION_SETTING_S_Start + 0xC8 : __OPTION_SETTING_S_Start; - KEEP(*(.option_setting_bps_sel2)) - __OPTION_SETTING_S_End = .; - } > OPTION_SETTING_S = 0xFF - - /* Symbol required for RA Configuration tool. */ - __tz_OPTION_SETTING_S_N = __OPTION_SETTING_S_End; -} diff --git a/hw/bsp/ra/family.c b/hw/bsp/ra/family.c index 42cb2d4a4..82d7a60c5 100644 --- a/hw/bsp/ra/family.c +++ b/hw/bsp/ra/family.c @@ -49,9 +49,9 @@ #include "board.h" /* Key code for writing PRCR register. */ -#define BSP_PRV_PRCR_KEY (0xA500U) +#define BSP_PRV_PRCR_KEY (0xA500U) #define BSP_PRV_PRCR_PRC1_UNLOCK ((BSP_PRV_PRCR_KEY) | 0x2U) -#define BSP_PRV_PRCR_LOCK ((BSP_PRV_PRCR_KEY) | 0x0U) +#define BSP_PRV_PRCR_LOCK ((BSP_PRV_PRCR_KEY) | 0x0U) /* ISR prototypes */ void usbfs_interrupt_handler(void); @@ -59,26 +59,87 @@ void usbfs_resume_handler(void); void usbfs_d0fifo_handler(void); void usbfs_d1fifo_handler(void); -BSP_DONT_REMOVE const -fsp_vector_t g_vector_table[BSP_ICU_VECTOR_MAX_ENTRIES] BSP_PLACE_IN_SECTION(BSP_SECTION_APPLICATION_VECTORS) = { +const fsp_vector_t g_vector_table[BSP_ICU_VECTOR_MAX_ENTRIES] BSP_PLACE_IN_SECTION(BSP_SECTION_APPLICATION_VECTORS) = { [0] = usbfs_interrupt_handler, /* USBFS INT (USBFS interrupt) */ [1] = usbfs_resume_handler, /* USBFS RESUME (USBFS resume interrupt) */ [2] = usbfs_d0fifo_handler, /* USBFS FIFO 0 (DMA transfer request 0) */ [3] = usbfs_d1fifo_handler, /* USBFS FIFO 1 (DMA transfer request 1) */ }; const bsp_interrupt_event_t g_interrupt_event_link_select[BSP_ICU_VECTOR_MAX_ENTRIES] = { - [0] = BSP_PRV_IELS_ENUM(EVENT_USBFS_INT), /* USBFS INT (USBFS interrupt) */ - [1] = BSP_PRV_IELS_ENUM(EVENT_USBFS_RESUME), /* USBFS RESUME (USBFS resume interrupt) */ - [2] = BSP_PRV_IELS_ENUM(EVENT_USBFS_FIFO_0), /* USBFS FIFO 0 (DMA transfer request 0) */ - [3] = BSP_PRV_IELS_ENUM(EVENT_USBFS_FIFO_1) /* USBFS FIFO 1 (DMA transfer request 1) */ + [0] = BSP_PRV_IELS_ENUM(EVENT_USBFS_INT), /* USBFS INT (USBFS interrupt) */ + [1] = BSP_PRV_IELS_ENUM(EVENT_USBFS_RESUME), /* USBFS RESUME (USBFS resume interrupt) */ + [2] = BSP_PRV_IELS_ENUM(EVENT_USBFS_FIFO_0), /* USBFS FIFO 0 (DMA transfer request 0) */ + [3] = BSP_PRV_IELS_ENUM(EVENT_USBFS_FIFO_1) /* USBFS FIFO 1 (DMA transfer request 1) */ }; -const ioport_cfg_t g_bsp_pin_cfg = { - .number_of_pins = sizeof(board_pin_cfg) / sizeof(ioport_pin_cfg_t), - .p_pin_cfg_data = board_pin_cfg, +static const ioport_cfg_t family_pin_cfg = { + .number_of_pins = sizeof(board_pin_cfg) / sizeof(ioport_pin_cfg_t), + .p_pin_cfg_data = board_pin_cfg, }; -ioport_instance_ctrl_t g_ioport_ctrl; -//const ioport_instance_t g_ioport = {.p_api = &g_ioport_on_ioport, .p_ctrl = &g_ioport_ctrl, .p_cfg = &g_bsp_pin_cfg}; +static ioport_instance_ctrl_t port_ctrl; + +//--------------------------------------------------------------------+ +// Board porting API +//--------------------------------------------------------------------+ + +void board_init(void) +{ + /* Configure pins. */ + R_IOPORT_Open(&port_ctrl, &family_pin_cfg); + + board_led_write(false); + + /* Enable USB_BASE */ + R_SYSTEM->PRCR = (uint16_t) BSP_PRV_PRCR_PRC1_UNLOCK; + R_MSTP->MSTPCRB &= ~(1U << 11U); + R_SYSTEM->PRCR = (uint16_t) BSP_PRV_PRCR_LOCK; + +#if CFG_TUSB_OS == OPT_OS_FREERTOS + // If freeRTOS is used, IRQ priority is limit by max syscall ( smaller is higher ) + NVIC_SetPriority(TU_IRQn, configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY); + NVIC_SetPriority(USBFS_RESUME_IRQn, configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY); + NVIC_SetPriority(USBFS_FIFO_0_IRQn, configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY); + NVIC_SetPriority(USBFS_FIFO_1_IRQn, configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY); +#endif + +#if CFG_TUSB_OS == OPT_OS_NONE + SysTick_Config(SystemCoreClock / 1000); +#endif +} + +void board_led_write(bool state) { + R_IOPORT_PinWrite(&port_ctrl, LED1, state ? LED_STATE_ON : !LED_STATE_ON); +} + +uint32_t board_button_read(void) { + bsp_io_level_t lvl; + R_IOPORT_PinRead(&port_ctrl, SW1, &lvl); + return lvl == BUTTON_STATE_ACTIVE; +} + +int board_uart_read(uint8_t *buf, int len) { + (void) buf; + (void) len; + return 0; +} + +int board_uart_write(void const *buf, int len) { + (void) buf; + (void) len; + return 0; +} + +#if CFG_TUSB_OS == OPT_OS_NONE +volatile uint32_t system_ticks = 0; + +void SysTick_Handler(void) { + system_ticks++; +} + +uint32_t board_millis(void) { + return system_ticks; +} +#endif //--------------------------------------------------------------------+ // Forward USB interrupt events to TinyUSB IRQ Handler @@ -139,93 +200,29 @@ void usbfs_d1fifo_handler(void) #endif } -void board_init(void) -{ - /* Configure pins. */ - R_IOPORT_Open(&g_ioport_ctrl, &g_bsp_pin_cfg); - - /* Enable USB_BASE */ - R_SYSTEM->PRCR = (uint16_t) BSP_PRV_PRCR_PRC1_UNLOCK; - R_MSTP->MSTPCRB &= ~(1U << 11U); - R_SYSTEM->PRCR = (uint16_t) BSP_PRV_PRCR_LOCK; - -#if CFG_TUSB_OS == OPT_OS_FREERTOS - // If freeRTOS is used, IRQ priority is limit by max syscall ( smaller is higher ) - NVIC_SetPriority(TU_IRQn, configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY); - NVIC_SetPriority(USBFS_RESUME_IRQn, configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY); - NVIC_SetPriority(USBFS_FIFO_0_IRQn, configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY); - NVIC_SetPriority(USBFS_FIFO_1_IRQn, configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY); -#endif - -#if CFG_TUSB_OS == OPT_OS_NONE - /* Init systick */ - SysTick_Config(SystemCoreClock / 1000); -#endif -} - //--------------------------------------------------------------------+ -// Board porting API +// stdlib //--------------------------------------------------------------------+ -void board_led_write(bool state) -{ - R_IOPORT_PinWrite(&g_ioport_ctrl, LED1, state ? LED_STATE_ON : !LED_STATE_ON); -} - -uint32_t board_button_read(void) -{ - bsp_io_level_t lvl; - R_IOPORT_PinRead(&g_ioport_ctrl, SW1, &lvl); - return lvl == BUTTON_STATE_ACTIVE; -} - -int board_uart_read(uint8_t *buf, int len) -{ - (void) buf; - (void) len; - return 0; -} - -int board_uart_write(void const *buf, int len) -{ - (void) buf; - (void) len; - return 0; -} - -#if CFG_TUSB_OS == OPT_OS_NONE -volatile uint32_t system_ticks = 0; -void SysTick_Handler(void) -{ - system_ticks++; -} - -uint32_t board_millis(void) -{ - return system_ticks; -} -#endif - -int close(int fd) -{ +int close(int fd) { (void) fd; return -1; } -int fstat(int fd, void *pstat) -{ + +int fstat(int fd, void *pstat) { (void) fd; (void) pstat; return 0; } -off_t lseek(int fd, off_t pos, int whence) -{ + +off_t lseek(int fd, off_t pos, int whence) { (void) fd; (void) pos; (void) whence; return 0; } -int isatty(int fd) -{ + +int isatty(int fd) { (void) fd; return 1; } diff --git a/hw/bsp/ra/family.cmake b/hw/bsp/ra/family.cmake index c4c25bf4f..57e05a4b1 100644 --- a/hw/bsp/ra/family.cmake +++ b/hw/bsp/ra/family.cmake @@ -9,6 +9,7 @@ set(FSP_RA ${TOP}/hw/mcu/renesas/fsp/ra/fsp) # include board specific include(${CMAKE_CURRENT_LIST_DIR}/boards/${BOARD}/board.cmake) +#set(FREERTOS_PORT A_CUSTOM_PORT CACHE INTERNAL "") set(CMAKE_TOOLCHAIN_FILE ${TOP}/tools/cmake/toolchain/arm_${TOOLCHAIN}.cmake) @@ -58,10 +59,15 @@ function(add_board_target BOARD_TARGET) update_board(${BOARD_TARGET}) + if (NOT DEFINED LD_FILE_${CMAKE_C_COMPILER_ID}) + set(LD_FILE_GNU ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/linker/gcc/${MCU_VARIANT}.ld) + endif () + if (CMAKE_C_COMPILER_ID STREQUAL "GNU") target_link_options(${BOARD_TARGET} PUBLIC # linker file "LINKER:--script=${LD_FILE_GNU}" + -L${CMAKE_CURRENT_FUNCTION_LIST_DIR}/linker/gcc -nostartfiles # nanolib --specs=nano.specs @@ -98,7 +104,16 @@ function(family_configure_example TARGET RTOS) ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/../../ ) - # Add TinyUSB target and port source +# # RA has custom freertos port +# if (NOT TARGET freertos_kernel_port) +# add_library(freertos_kernel_port STATIC) +# target_sources(freertos_kernel_port PUBLIC ${FSP_RA}/src/rm_freertos_port/port.c) +# target_include_directories(freertos_kernel_port PUBLIC ${FSP_RA}/src/rm_freertos_port) +# +# target_link_libraries(freertos_kernel_port PUBLIC freertos_kernel) +# endif () + + # Add TinyUSB target and port source family_add_tinyusb(${TARGET} OPT_MCU_RAXXX ${RTOS}) target_sources(${TARGET}-tinyusb PUBLIC ${TOP}/src/portable/renesas/rusb2/dcd_rusb2.c diff --git a/hw/bsp/ra/family.mk b/hw/bsp/ra/family.mk index 8e4f80eaf..6e90583e7 100644 --- a/hw/bsp/ra/family.mk +++ b/hw/bsp/ra/family.mk @@ -43,6 +43,11 @@ INC += \ $(TOP)/$(FSP_RA)/inc/instances \ $(TOP)/$(FSP_RA)/src/bsp/mcu/$(MCU_VARIANT) \ +ifndef LD_FILE +LD_FILE = $(FAMILY_PATH)/linker/gcc/$(MCU_VARIANT).ld +LDFLAGS += -L$(TOP)/$(FAMILY_PATH)/linker/gcc +endif + # For freeRTOS port source # hack to use the port provided by renesas FREERTOS_PORTABLE_SRC = $(FSP_RA)/src/rm_freertos_port diff --git a/hw/bsp/ra/linker/gcc/fsp.ld b/hw/bsp/ra/linker/gcc/fsp.ld new file mode 100644 index 000000000..453d46f24 --- /dev/null +++ b/hw/bsp/ra/linker/gcc/fsp.ld @@ -0,0 +1,716 @@ +/* Uncomment and set XIP_SECONDARY_SLOT_IMAGE to 1 below for the secondary XIP application image.*/ +/* + XIP_SECONDARY_SLOT_IMAGE = 1; +*/ + +QSPI_FLASH_PRV_LENGTH = DEFINED(QSPI_FLASH_SIZE) ? ABSOLUTE(QSPI_FLASH_SIZE) : ABSOLUTE(QSPI_FLASH_LENGTH); +OSPI_DEVICE_0_PRV_LENGTH = DEFINED(OSPI_DEVICE_0_SIZE) ? ABSOLUTE(OSPI_DEVICE_0_SIZE) : ABSOLUTE(OSPI_DEVICE_0_LENGTH); +OSPI_DEVICE_1_PRV_LENGTH = DEFINED(OSPI_DEVICE_1_SIZE) ? ABSOLUTE(OSPI_DEVICE_1_SIZE) : ABSOLUTE(OSPI_DEVICE_1_LENGTH); + +/* If a flat (secure) project has DEFINED RAM_NS_BUFFER_LENGTH, then emit IDAU symbols to allocate non-secure RAM. */ +__RESERVE_NS_RAM = !DEFINED(PROJECT_NONSECURE) && DEFINED(RAM_NS_BUFFER_LENGTH) && (OPTION_SETTING_S_LENGTH != 0); + +ITCM_START = DEFINED(ITCM_START)? ITCM_START : 0; +ITCM_LENGTH = DEFINED(ITCM_LENGTH)? ITCM_LENGTH : 0; +DTCM_START = DEFINED(DTCM_START)? DTCM_START : 0; +DTCM_LENGTH = DEFINED(DTCM_LENGTH)? DTCM_LENGTH : 0; +NS_OFFSET_START = DEFINED(NS_OFFSET_START) ? NS_OFFSET_START : 0; +NS_IMAGE_OFFSET = DEFINED(PROJECT_NONSECURE) ? NS_OFFSET_START : 0; +RAM_NS_BUFFER_BLOCK_LENGTH = DEFINED(RAM_NS_BUFFER_LENGTH) ? ALIGN(RAM_NS_BUFFER_LENGTH, 8192) : 0; +RAM_NS_BUFFER_LENGTH = DEFINED(RAM_NS_BUFFER_LENGTH) ? RAM_NS_BUFFER_LENGTH : 0; +RAM_NS_BUFFER_START = RAM_START + RAM_LENGTH - RAM_NS_BUFFER_LENGTH; +RAM_NS_BUFFER_BLOCK_START = RAM_START + RAM_LENGTH - RAM_NS_BUFFER_BLOCK_LENGTH; + +OPTION_SETTING_START_NS = DEFINED(PROJECT_NONSECURE) ? OPTION_SETTING_START : OPTION_SETTING_START + 0x80; + +/* This definition is used to avoid moving the counter in OPTION_SETTING regions for projects that should not configure option settings. + * Bootloader images do not configure option settings because they are owned by the bootloader. + * FSP_BOOTABLE_IMAGE is only defined in bootloader images. */ +__bl_FSP_BOOTABLE_IMAGE = 1; +__bln_FSP_BOOTABLE_IMAGE = 1; +PROJECT_SECURE_OR_FLAT = (!DEFINED(PROJECT_NONSECURE) || DEFINED(PROJECT_SECURE)) && OPTION_SETTING_LENGTH && !DEFINED(FSP_BOOTABLE_IMAGE); +USE_OPTION_SETTING_NS = DEFINED(PROJECT_NONSECURE) && !DEFINED(FSP_BOOTABLE_IMAGE); + +__bl_FLASH_IMAGE_START = !DEFINED(FLASH_BOOTLOADER_LENGTH) ? 0 : + FLASH_APPLICATION_IMAGE_NUMBER == 1 ? FLASH_BOOTLOADER_LENGTH + FLASH_BOOTLOADER_HEADER_LENGTH : + FLASH_BOOTLOADER_LENGTH + FLASH_BOOTLOADER_SCRATCH_LENGTH + FLASH_APPLICATION_S_LENGTH + FLASH_BOOTLOADER_HEADER_LENGTH; +__bl_FLASH_IMAGE_LENGTH = !DEFINED(FLASH_BOOTLOADER_LENGTH) ? 0 : + FLASH_APPLICATION_S_LENGTH - FLASH_BOOTLOADER_HEADER_LENGTH; +__bl_FLASH_IMAGE_END = __bl_FLASH_IMAGE_START + __bl_FLASH_IMAGE_LENGTH; +__bl_XIP_SECONDARY_FLASH_IMAGE_START = !DEFINED(FLASH_BOOTLOADER_LENGTH) ? 0 : + FLASH_BOOTLOADER_LENGTH + FLASH_APPLICATION_S_LENGTH + FLASH_BOOTLOADER_HEADER_LENGTH; +__bl_XIP_SECONDARY_FLASH_IMAGE_END = __bl_XIP_SECONDARY_FLASH_IMAGE_START + __bl_FLASH_IMAGE_LENGTH; +__bl_FLASH_NS_START = !DEFINED(FLASH_BOOTLOADER_LENGTH) ? 0 : + FLASH_APPLICATION_NS_LENGTH == 0 ? __bl_FLASH_IMAGE_END : + __bl_FLASH_IMAGE_START - FLASH_BOOTLOADER_HEADER_LENGTH + FLASH_APPLICATION_S_LENGTH; +__bl_FLASH_NSC_START = !DEFINED(FLASH_BOOTLOADER_LENGTH) ? 0 : + FLASH_APPLICATION_NS_LENGTH == 0 ? __bl_FLASH_IMAGE_END : + __bl_FLASH_NS_START - FLASH_APPLICATION_NSC_LENGTH; +__bl_RAM_NS_START = !DEFINED(FLASH_BOOTLOADER_LENGTH) ? 0 : + FLASH_APPLICATION_NS_LENGTH == 0 ? RAM_START + RAM_LENGTH : + RAM_START + RAM_LENGTH - RAM_APPLICATION_NS_LENGTH; +__bl_RAM_NSC_START = !DEFINED(FLASH_BOOTLOADER_LENGTH) ? 0 : + FLASH_APPLICATION_NS_LENGTH == 0 ? RAM_START + RAM_LENGTH : + __bl_RAM_NS_START - RAM_APPLICATION_NSC_LENGTH; +__bl_FLASH_NS_IMAGE_START = !DEFINED(FLASH_BOOTLOADER_LENGTH) ? 0 : + FLASH_APPLICATION_NS_LENGTH == 0 ? __bl_FLASH_IMAGE_END : + __bl_FLASH_NS_START + FLASH_BOOTLOADER_HEADER_LENGTH_2; +__bln_FLASH_IMAGE_START = __bl_FLASH_NS_IMAGE_START; +__bln_FLASH_IMAGE_LENGTH = !DEFINED(FLASH_BOOTLOADER_LENGTH) ? 0 : + FLASH_APPLICATION_NS_LENGTH == 0 ? __bl_FLASH_IMAGE_END : + FLASH_APPLICATION_NS_LENGTH - FLASH_BOOTLOADER_HEADER_LENGTH_2; + +XIP_SECONDARY_SLOT_IMAGE = DEFINED(XIP_SECONDARY_SLOT_IMAGE) ? XIP_SECONDARY_SLOT_IMAGE : 0; +FLASH_ORIGIN = !DEFINED(FLASH_IMAGE_START) ? FLASH_START : + XIP_SECONDARY_SLOT_IMAGE == 1 ? XIP_SECONDARY_FLASH_IMAGE_START : + FLASH_IMAGE_START; +LIMITED_FLASH_LENGTH = DEFINED(FLASH_IMAGE_LENGTH) ? FLASH_IMAGE_LENGTH : + DEFINED(FLASH_BOOTLOADER_LENGTH) ? FLASH_BOOTLOADER_LENGTH : + FLASH_LENGTH; + +/* Define memory regions. */ +MEMORY +{ + ITCM (rx) : ORIGIN = ITCM_START + NS_IMAGE_OFFSET, LENGTH = ITCM_LENGTH + DTCM (rwx) : ORIGIN = DTCM_START + NS_IMAGE_OFFSET, LENGTH = DTCM_LENGTH + FLASH (rx) : ORIGIN = FLASH_ORIGIN + NS_IMAGE_OFFSET, LENGTH = LIMITED_FLASH_LENGTH + RAM (rwx) : ORIGIN = RAM_START + NS_IMAGE_OFFSET, LENGTH = RAM_LENGTH + DATA_FLASH (rx) : ORIGIN = DATA_FLASH_START + NS_IMAGE_OFFSET, LENGTH = DATA_FLASH_LENGTH + QSPI_FLASH (rx) : ORIGIN = QSPI_FLASH_START, LENGTH = QSPI_FLASH_PRV_LENGTH + OSPI_DEVICE_0 (rx) : ORIGIN = OSPI_DEVICE_0_START, LENGTH = OSPI_DEVICE_0_PRV_LENGTH + OSPI_DEVICE_1 (rx) : ORIGIN = OSPI_DEVICE_1_START, LENGTH = OSPI_DEVICE_1_PRV_LENGTH + OSPI_DEVICE_0_RAM (rwx) : ORIGIN = OSPI_DEVICE_0_START, LENGTH = OSPI_DEVICE_0_PRV_LENGTH + OSPI_DEVICE_1_RAM (rwx) : ORIGIN = OSPI_DEVICE_1_START, LENGTH = OSPI_DEVICE_1_PRV_LENGTH + SDRAM (rwx) : ORIGIN = SDRAM_START, LENGTH = SDRAM_LENGTH + OPTION_SETTING (r) : ORIGIN = OPTION_SETTING_START + NS_IMAGE_OFFSET, LENGTH = OPTION_SETTING_LENGTH + OPTION_SETTING_OFS (r) : ORIGIN = OPTION_SETTING_START + NS_IMAGE_OFFSET, LENGTH = 0x18 + OPTION_SETTING_SAS (r) : ORIGIN = OPTION_SETTING_START + NS_IMAGE_OFFSET + 0x34, LENGTH = OPTION_SETTING_LENGTH - 0x34 + OPTION_SETTING_S (r) : ORIGIN = OPTION_SETTING_S_START + NS_IMAGE_OFFSET, LENGTH = OPTION_SETTING_S_LENGTH + ID_CODE (rx) : ORIGIN = ID_CODE_START, LENGTH = ID_CODE_LENGTH +} + +/* Library configurations */ +GROUP(libgcc.a libc.a libm.a libnosys.a) + +/* Linker script to place sections and symbol values. Should be used together + * with other linker script that defines memory regions FLASH and RAM. + * It references following symbols, which must be DEFINED in code: + * Reset_Handler : Entry of reset handler + * + * It defines following symbols, which code can use without definition: + * __exidx_start + * __exidx_end + * __copy_table_start__ + * __copy_table_end__ + * __zero_table_start__ + * __zero_table_end__ + * __etext + * __data_start__ + * __preinit_array_start + * __preinit_array_end + * __init_array_start + * __init_array_end + * __fini_array_start + * __fini_array_end + * __data_end__ + * __bss_start__ + * __bss_end__ + * __HeapLimit + * __StackLimit + * __StackTop + * __stack + * __Vectors_End + * __Vectors_Size + * __qspi_flash_start__ + * __qspi_flash_end__ + * __qspi_flash_code_size__ + * __qspi_region_max_size__ + * __qspi_region_start_address__ + * __qspi_region_end_address__ + * __ospi_device_0_start__ + * __ospi_device_0_end__ + * __ospi_device_0_code_size__ + * __ospi_device_0_region_max_size__ + * __ospi_device_0_region_start_address__ + * __ospi_device_0_region_end_address__ + * __ospi_device_1_start__ + * __ospi_device_1_end__ + * __ospi_device_1_code_size__ + * __ospi_device_1_region_max_size__ + * __ospi_device_1_region_start_address__ + * __ospi_device_1_region_end_address__ + */ +ENTRY(Reset_Handler) + +SECTIONS +{ + /* Initialized ITCM data. */ + .itcm_data : + { + /* Start of ITCM Secure Trustzone region. */ + __tz_ITCM_S = ABSOLUTE(ITCM_START); + + /* All ITCM data start */ + __itcm_data_start__ = .; + + KEEP(*(.itcm_data*)) + + /* All ITCM data end */ + __itcm_data_end__ = .; + + /* + * Start of the ITCM Non-Secure Trustzone region. + * ITCM_NS_START can be used to set a fixed address for non-secure ITCM in secure projects or flat projects. + */ + __tz_ITCM_N = DEFINED(ITCM_NS_START) ? ABSOLUTE(ITCM_NS_START) : ALIGN(__itcm_data_end__, 8192); + } > ITCM + + .text : + { + __tz_FLASH_S = ABSOLUTE(FLASH_START); + __ROM_Start = .; + + /* Even though the vector table is not 256 entries (1KB) long, we still allocate that much + * space because ROM registers are at address 0x400 and there is very little space + * in between. */ + KEEP(*(.fixed_vectors*)) + KEEP(*(.application_vectors*)) + __Vectors_End = .; + + /* ROM Registers start at address 0x00000400 for devices that do not have the OPTION_SETTING region. */ + . = OPTION_SETTING_LENGTH > 0 ? . : __ROM_Start + 0x400; + KEEP(*(.rom_registers*)) + + /* Reserving 0x100 bytes of space for ROM registers. */ + . = OPTION_SETTING_LENGTH > 0 ? . : __ROM_Start + 0x500; + + /* Allocate flash write-boundary-aligned + * space for sce9 wrapped public keys for mcuboot if the module is used. + */ + . = ALIGN(128); + KEEP(*(.mcuboot_sce9_key*)) + + *(.text*) + + KEEP(*(.version)) + KEEP(*(.init)) + KEEP(*(.fini)) + + /* .ctors */ + *crtbegin.o(.ctors) + *crtbegin?.o(.ctors) + *(EXCLUDE_FILE(*crtend?.o *crtend.o) .ctors) + *(SORT(.ctors.*)) + *(.ctors) + + /* .dtors */ + *crtbegin.o(.dtors) + *crtbegin?.o(.dtors) + *(EXCLUDE_FILE(*crtend?.o *crtend.o) .dtors) + *(SORT(.dtors.*)) + *(.dtors) + + *(.rodata*) + __usb_dev_descriptor_start_fs = .; + KEEP(*(.usb_device_desc_fs*)) + __usb_cfg_descriptor_start_fs = .; + KEEP(*(.usb_config_desc_fs*)) + __usb_interface_descriptor_start_fs = .; + KEEP(*(.usb_interface_desc_fs*)) + __usb_descriptor_end_fs = .; + __usb_dev_descriptor_start_hs = .; + KEEP(*(.usb_device_desc_hs*)) + __usb_cfg_descriptor_start_hs = .; + KEEP(*(.usb_config_desc_hs*)) + __usb_interface_descriptor_start_hs = .; + KEEP(*(.usb_interface_desc_hs*)) + __usb_descriptor_end_hs = .; + + KEEP(*(.eh_frame*)) + + __ROM_End = .; + } > FLASH = 0xFF + + __Vectors_Size = __Vectors_End - __Vectors; + + .ARM.extab : + { + *(.ARM.extab* .gnu.linkonce.armextab.*) + } > FLASH + + __exidx_start = .; + .ARM.exidx : + { + *(.ARM.exidx* .gnu.linkonce.armexidx.*) + } > FLASH + __exidx_end = .; + + /* To copy multiple ROM to RAM sections, + * uncomment .copy.table section and, + * define __STARTUP_COPY_MULTIPLE in startup_ARMCMx.S */ + /* + .copy.table : + { + . = ALIGN(4); + __copy_table_start__ = .; + LONG (__etext) + LONG (__data_start__) + LONG (__data_end__ - __data_start__) + LONG (__etext2) + LONG (__data2_start__) + LONG (__data2_end__ - __data2_start__) + __copy_table_end__ = .; + } > FLASH + */ + + /* To clear multiple BSS sections, + * uncomment .zero.table section and, + * define __STARTUP_CLEAR_BSS_MULTIPLE in startup_ARMCMx.S */ + /* + .zero.table : + { + . = ALIGN(4); + __zero_table_start__ = .; + LONG (__bss_start__) + LONG (__bss_end__ - __bss_start__) + LONG (__bss2_start__) + LONG (__bss2_end__ - __bss2_start__) + __zero_table_end__ = .; + } > FLASH + */ + + __etext = .; + + __tz_RAM_S = ORIGIN(RAM); + + /* If DTC is used, put the DTC vector table at the start of SRAM. + This avoids memory holes due to 1K alignment required by it. */ + .fsp_dtc_vector_table (NOLOAD) : + { + . = ORIGIN(RAM); + *(.fsp_dtc_vector_table) + } > RAM + + /* Initialized data section. */ + .data : + { + __data_start__ = .; + . = ALIGN(4); + + __Code_In_RAM_Start = .; + + KEEP(*(.code_in_ram*)) + __Code_In_RAM_End = .; + + *(vtable) + /* Don't use *(.data*) because it will place data meant for .data_flash in this section. */ + *(.data.*) + *(.data) + + . = ALIGN(4); + /* preinit data */ + PROVIDE_HIDDEN (__preinit_array_start = .); + KEEP(*(.preinit_array)) + PROVIDE_HIDDEN (__preinit_array_end = .); + + . = ALIGN(4); + /* init data */ + PROVIDE_HIDDEN (__init_array_start = .); + KEEP(*(SORT(.init_array.*))) + KEEP(*(.init_array)) + PROVIDE_HIDDEN (__init_array_end = .); + + + . = ALIGN(4); + /* finit data */ + PROVIDE_HIDDEN (__fini_array_start = .); + KEEP(*(SORT(.fini_array.*))) + KEEP(*(.fini_array)) + PROVIDE_HIDDEN (__fini_array_end = .); + + KEEP(*(.jcr*)) + + . = ALIGN(4); + + /* All data end */ + __data_end__ = .; + + } > RAM AT > FLASH + + /* Start address of the initial values for .dtcm_data. */ + __dtcm_data_init_start = __etext + __data_end__ - __data_start__; + + /* Initialized DTCM data. */ + .dtcm_data : + { + /* Start of DTCM Secure Trustzone region. */ + __tz_DTCM_S = ABSOLUTE(DTCM_START); + + /* Initialized DTCM data start */ + __dtcm_data_start__ = .; + + KEEP(*(.dtcm_data*)) + + /* Initialized DTCM data end */ + __dtcm_data_end__ = .; + } > DTCM AT > FLASH + + /* Uninitialized DTCM data. */ + .dtcm_noinit (NOLOAD): + { + /* Uninitialized DTCM data start */ + __dtcm_noinit_start = .; + + KEEP(*(.dtcm_noinit*)) + + /* Uninitialized DTCM data end */ + __dtcm_noinit_end = .; + + /* + * Start of the DTCM Non-Secure Trustzone region. + * DTCM_NS_START can be used to set a fixed address for non-secure ITCM in secure projects or flat projects. + */ + __tz_DTCM_N = DEFINED(DTCM_NS_START) ? ABSOLUTE(DTCM_NS_START) : ALIGN(__dtcm_noinit_end, 8192); + } > DTCM + + /* TrustZone Secure Gateway Stubs Section. */ + + /* Some arithmetic is needed to eliminate unnecessary FILL for secure projects. */ + /* 1. Get the address to the next block after the .data section in FLASH. */ + DATA_END = LOADADDR(.data) + SIZEOF(.data); + /* 2. Determine the secure gateway stubs address either by the provided linker variable or the next 1024-byte block after .data */ + SGSTUBS_LOC = (DEFINED(PROJECT_SECURE) && DEFINED(FLASH_NSC_START)) ? ABSOLUTE(FLASH_NSC_START) : ALIGN(DATA_END, 1024); + /* 3. Manually specify the start location for .gnu.sgstubs */ + .gnu.sgstubs SGSTUBS_LOC : ALIGN(1024) + { + __tz_FLASH_C = DEFINED(FLASH_NSC_START) ? ABSOLUTE(FLASH_NSC_START) : __RESERVE_NS_RAM ? ABSOLUTE(FLASH_START + FLASH_LENGTH) : ALIGN(1024); + _start_sg = .; + *(.gnu.sgstubs*) + . = ALIGN(32); + _end_sg = .; + } > FLASH + + __tz_FLASH_N = DEFINED(FLASH_NS_START) ? ABSOLUTE(FLASH_NS_START) : __RESERVE_NS_RAM ? ABSOLUTE(FLASH_START + FLASH_LENGTH) : FLASH_LENGTH < 32768 ? FLASH_LENGTH : ALIGN(32768); + FLASH_NS_IMAGE_START = DEFINED(FLASH_NS_IMAGE_START) ? FLASH_NS_IMAGE_START : __tz_FLASH_N; + + /* Note: There are no secure/non-secure boundaries for QSPI. These symbols are provided for the RA configuration tool. */ + __tz_QSPI_FLASH_S = ORIGIN(QSPI_FLASH); + + /* QSPI_FLASH section to be downloaded via debugger */ + .qspi_flash : + { + __qspi_flash_start__ = .; + KEEP(*(.qspi_flash*)) + KEEP(*(.code_in_qspi*)) + __qspi_flash_end__ = .; + } > QSPI_FLASH + __qspi_flash_code_size__ = __qspi_flash_end__ - __qspi_flash_start__; + + /* QSPI_FLASH non-retentive section, creates a copy in internal flash that can be copied to QSPI */ + __qspi_flash_code_addr__ = __etext + (__data_end__ - __data_start__); + .qspi_non_retentive : AT (__qspi_flash_code_addr__) + { + __qspi_non_retentive_start__ = .; + KEEP(*(.qspi_non_retentive*)) + __qspi_non_retentive_end__ = .; + } > QSPI_FLASH + __qspi_non_retentive_size__ = __qspi_non_retentive_end__ - __qspi_non_retentive_start__; + + __qspi_region_max_size__ = 0x4000000; /* Must be the same as defined in MEMORY above */ + __qspi_region_start_address__ = __qspi_flash_start__; + __qspi_region_end_address__ = __qspi_flash_start__ + __qspi_region_max_size__; + + /* Note: There are no secure/non-secure boundaries for QSPI. These symbols are provided for the RA configuration tool. */ + __tz_QSPI_FLASH_N = __qspi_non_retentive_end__; + + /* Support for OctaRAM */ + .OSPI_DEVICE_0_NO_LOAD (NOLOAD): + { + . = ALIGN(4); + __ospi_device_0_start__ = .; + *(.ospi_device_0_no_load*) + . = ALIGN(4); + __ospi_device_0_end__ = .; + } > OSPI_DEVICE_0_RAM + + .OSPI_DEVICE_1_NO_LOAD (NOLOAD): + { + . = ALIGN(4); + __ospi_device_1_start__ = .; + *(.ospi_device_1_no_load*) + . = ALIGN(4); + __ospi_device_1_end__ = .; + } > OSPI_DEVICE_1_RAM + + /* Note: There are no secure/non-secure boundaries for QSPI. These symbols are provided for the RA configuration tool. */ + __tz_OSPI_DEVICE_0_S = ORIGIN(OSPI_DEVICE_0); + + /* OSPI_DEVICE_0 section to be downloaded via debugger */ + .OSPI_DEVICE_0 : + { + __ospi_device_0_start__ = .; + KEEP(*(.ospi_device_0*)) + KEEP(*(.code_in_ospi_device_0*)) + __ospi_device_0_end__ = .; + } > OSPI_DEVICE_0 + __ospi_device_0_code_size__ = __ospi_device_0_end__ - __ospi_device_0_start__; + + /* OSPI_DEVICE_0 non-retentive section, creates a copy in internal flash that can be copied to OSPI */ + __ospi_device_0_code_addr__ = __etext + (__data_end__ - __data_start__); + .ospi_device_0_non_retentive : AT (__ospi_device_0_code_addr__) + { + __ospi_device_0_non_retentive_start__ = .; + KEEP(*(.ospi_device_0_non_retentive*)) + __ospi_device_0_non_retentive_end__ = .; + } > OSPI_DEVICE_0 + __ospi_device_0_non_retentive_size__ = __ospi_device_0_non_retentive_end__ - __ospi_device_0_non_retentive_start__; + + __ospi_device_0_region_max_size__ = 0x8000000; /* Must be the same as defined in MEMORY above */ + __ospi_device_0_region_start_address__ = __ospi_device_0_start__; + __ospi_device_0_region_end_address__ = __ospi_device_0_start__ + __ospi_device_0_region_max_size__; + + /* Note: There are no secure/non-secure boundaries for OSPI. These symbols are provided for the RA configuration tool. */ + __tz_OSPI_DEVICE_0_N = __ospi_device_0_non_retentive_end__; + + /* Note: There are no secure/non-secure boundaries for OSPI. These symbols are provided for the RA configuration tool. */ + __tz_OSPI_DEVICE_1_S = ORIGIN(OSPI_DEVICE_1); + + /* OSPI_DEVICE_1 section to be downloaded via debugger */ + .OSPI_DEVICE_1 : + { + __ospi_device_1_start__ = .; + KEEP(*(.ospi_device_1*)) + KEEP(*(.code_in_ospi_device_1*)) + __ospi_device_1_end__ = .; + } > OSPI_DEVICE_1 + __ospi_device_1_code_size__ = __ospi_device_1_end__ - __ospi_device_1_start__; + + /* OSPI_DEVICE_1 non-retentive section, creates a copy in internal flash that can be copied to OSPI */ + __ospi_device_1_code_addr__ = __etext + (__data_end__ - __data_start__); + .ospi_device_1_non_retentive : AT (__ospi_device_1_code_addr__) + { + __ospi_device_1_non_retentive_start__ = .; + KEEP(*(.ospi_device_1_non_retentive*)) + __ospi_device_1_non_retentive_end__ = .; + } > OSPI_DEVICE_1 + __ospi_device_1_non_retentive_size__ = __ospi_device_1_non_retentive_end__ - __ospi_device_1_non_retentive_start__; + + __ospi_device_1_region_max_size__ = 0x10000000; /* Must be the same as defined in MEMORY above */ + __ospi_device_1_region_start_address__ = __ospi_device_1_start__; + __ospi_device_1_region_end_address__ = __ospi_device_1_start__ + __ospi_device_1_region_max_size__; + + /* Note: There are no secure/non-secure boundaries for OSPI. These symbols are provided for the RA configuration tool. */ + __tz_OSPI_DEVICE_1_N = __ospi_device_1_non_retentive_end__; + + .noinit (NOLOAD): + { + . = ALIGN(4); + __noinit_start = .; + KEEP(*(.noinit*)) + . = ALIGN(8); + /* Place the FreeRTOS heap here so that the __HeapLimit calculation does not include the freertos heap. */ + KEEP(*(.heap.*)) + __noinit_end = .; + } > RAM + + .bss : + { + . = ALIGN(4); + __bss_start__ = .; + *(.bss*) + *(COMMON) + . = ALIGN(4); + __bss_end__ = .; + } > RAM + + .heap (NOLOAD): + { + . = ALIGN(8); + __HeapBase = .; + PROVIDE(end = .); + /* Place the STD heap here. */ + KEEP(*(.heap)) + __HeapLimit = .; + } > RAM + + /* Stacks are stored in this section. */ + .stack_dummy (NOLOAD): + { + . = ALIGN(8); + __StackLimit = .; + /* Main stack */ + KEEP(*(.stack)) + __StackTop = .; + /* Thread stacks */ + KEEP(*(.stack*)) + __StackTopAll = .; + } > RAM + + PROVIDE(__stack = __StackTopAll); + + /* This symbol represents the end of user allocated RAM. The RAM after this symbol can be used + at run time for things such as ThreadX memory pool allocations. */ + __RAM_segment_used_end__ = ALIGN(__StackTopAll , 4); + + /* RAM_NSC_START can be used to set a fixed address for non-secure callable RAM in secure projects. + * If it is not specified, the address for NSC RAM is the end of RAM aligned to a 1K boundary. + * In flat projects that require non-secure RAM, this variable is set to the start of non-secure RAM. */ + __tz_RAM_C = DEFINED(RAM_NSC_START) ? ABSOLUTE(RAM_NSC_START - RAM_NS_BUFFER_BLOCK_LENGTH) : __RESERVE_NS_RAM ? ABSOLUTE(RAM_NS_BUFFER_BLOCK_START) : ALIGN(__RAM_segment_used_end__, 1024); + + /* RAM_NS_START can be used to set a fixed address for non-secure RAM in secure projects or flat projects. + * RAM_NS_BUFFER_BLOCK_LENGTH is used to allocate non-secure buffers in a flat project. If it is not + * specified, the address for NSC RAM is the end of RAM aligned to an 8K boundary. + * In flat projects that require non-secure RAM, this variable is set to the start of non-secure RAM. */ + __tz_RAM_N = DEFINED(RAM_NS_START) ? ABSOLUTE(RAM_NS_START - RAM_NS_BUFFER_BLOCK_LENGTH) : __RESERVE_NS_RAM ? ABSOLUTE(RAM_NS_BUFFER_BLOCK_START) : ALIGN(__tz_RAM_C, 8192); + + /* Non-secure buffers must be in non-secure RAM. This is primarily used for the EDMAC in flat projects. + * The EDMAC is a non-secure bus master and can only access non-secure RAM. */ + .ns_buffer (NOLOAD): + { + /* Allocate RAM on a 32-byte boundary to help with placement of Ethernet buffers. */ + . = __RESERVE_NS_RAM ? ABSOLUTE(RAM_NS_BUFFER_START & 0xFFFFFFE0) : .; + + KEEP(*(.ns_buffer*)) + } > RAM + + /* Data flash. */ + .data_flash : + { + . = ORIGIN(DATA_FLASH); + __tz_DATA_FLASH_S = .; + __Data_Flash_Start = .; + KEEP(*(.data_flash*)) + __Data_Flash_End = .; + + __tz_DATA_FLASH_N = DEFINED(DATA_FLASH_NS_START) ? ABSOLUTE(DATA_FLASH_NS_START) : __RESERVE_NS_RAM ? ABSOLUTE(DATA_FLASH_START + DATA_FLASH_LENGTH) : ALIGN(1024); + } > DATA_FLASH + + /* Note: There are no secure/non-secure boundaries for SDRAM. These symbols are provided for the RA configuration tool. */ + __tz_SDRAM_S = ORIGIN(SDRAM); + + /* SDRAM */ + .sdram (NOLOAD): + { + __SDRAM_Start = .; + KEEP(*(.sdram*)) + KEEP(*(.frame*)) + __SDRAM_End = .; + } > SDRAM + + /* Note: There are no secure/non-secure boundaries for SDRAM. These symbols are provided for the RA configuration tool. */ + __tz_SDRAM_N = __SDRAM_End; + + /* Note: There are no secure/non-secure boundaries for ID_CODE. These symbols are provided for the RA configuration tool. */ + __tz_ID_CODE_S = ORIGIN(ID_CODE); + + /* Note: There are no secure/non-secure boundaries for ID_CODE. These symbols are provided for the RA configuration tool. + * Set this symbol to the same value as __tz_ID_CODE_S so the RA configuration tool does not split the ID_CODE + * memory region between TrustZone projects. */ + __tz_ID_CODE_N = __tz_ID_CODE_S; + + .id_code : + { + __ID_Code_Start = .; + KEEP(*(.id_code*)) + __ID_Code_End = .; + } > ID_CODE + + + /* Symbol required for RA Configuration tool. */ + __tz_OPTION_SETTING_S = ORIGIN(OPTION_SETTING_OFS); + + .option_setting_ofs : + { + __OPTION_SETTING_OFS_Start = .; + KEEP(*(.option_setting_ofs0)) + . = PROJECT_SECURE_OR_FLAT ? __OPTION_SETTING_OFS_Start + 0x04 : __OPTION_SETTING_OFS_Start; + KEEP(*(.option_setting_ofs2)) + . = PROJECT_SECURE_OR_FLAT ? __OPTION_SETTING_OFS_Start + 0x10 : __OPTION_SETTING_OFS_Start; + KEEP(*(.option_setting_dualsel)) + __OPTION_SETTING_OFS_End = .; + } > OPTION_SETTING_OFS = 0xFF + + .option_setting_sas : + { + __OPTION_SETTING_SAS_Start = .; + KEEP(*(.option_setting_sas)) + __OPTION_SETTING_SAS_End = .; + } > OPTION_SETTING_SAS = 0xFF + + /* Symbol required for RA Configuration tool. */ + __tz_OPTION_SETTING_N = ABSOLUTE(OPTION_SETTING_START_NS); + + .option_setting_ns : + { + __OPTION_SETTING_NS_Start = .; + KEEP(*(.option_setting_ofs1)) + . = USE_OPTION_SETTING_NS ? __OPTION_SETTING_NS_Start + 0x04 : __OPTION_SETTING_NS_Start; + KEEP(*(.option_setting_ofs3)) + . = USE_OPTION_SETTING_NS ? __OPTION_SETTING_NS_Start + 0x10 : __OPTION_SETTING_NS_Start; + KEEP(*(.option_setting_banksel)) + . = USE_OPTION_SETTING_NS ? __OPTION_SETTING_NS_Start + 0x40 : __OPTION_SETTING_NS_Start; + KEEP(*(.option_setting_bps0)) + . = USE_OPTION_SETTING_NS ? __OPTION_SETTING_NS_Start + 0x44 : __OPTION_SETTING_NS_Start; + KEEP(*(.option_setting_bps1)) + . = USE_OPTION_SETTING_NS ? __OPTION_SETTING_NS_Start + 0x48 : __OPTION_SETTING_NS_Start; + KEEP(*(.option_setting_bps2)) + . = USE_OPTION_SETTING_NS ? __OPTION_SETTING_NS_Start + 0x4C : __OPTION_SETTING_NS_Start; + KEEP(*(.option_setting_bps3)) + . = USE_OPTION_SETTING_NS ? __OPTION_SETTING_NS_Start + 0x60 : __OPTION_SETTING_NS_Start; + KEEP(*(.option_setting_pbps0)) + . = USE_OPTION_SETTING_NS ? __OPTION_SETTING_NS_Start + 0x64 : __OPTION_SETTING_NS_Start; + KEEP(*(.option_setting_pbps1)) + . = USE_OPTION_SETTING_NS ? __OPTION_SETTING_NS_Start + 0x68 : __OPTION_SETTING_NS_Start; + KEEP(*(.option_setting_pbps2)) + . = USE_OPTION_SETTING_NS ? __OPTION_SETTING_NS_Start + 0x6C : __OPTION_SETTING_NS_Start; + KEEP(*(.option_setting_pbps3)) + __OPTION_SETTING_NS_End = .; + } > OPTION_SETTING = 0xFF + + /* Symbol required for RA Configuration tool. */ + __tz_OPTION_SETTING_S_S = ORIGIN(OPTION_SETTING_S); + + .option_setting_s : + { + __OPTION_SETTING_S_Start = .; + KEEP(*(.option_setting_ofs1_sec)) + . = PROJECT_SECURE_OR_FLAT ? __OPTION_SETTING_S_Start + 0x04 : __OPTION_SETTING_S_Start; + KEEP(*(.option_setting_ofs3_sec)) + . = PROJECT_SECURE_OR_FLAT ? __OPTION_SETTING_S_Start + 0x10 : __OPTION_SETTING_S_Start; + KEEP(*(.option_setting_banksel_sec)) + . = PROJECT_SECURE_OR_FLAT ? __OPTION_SETTING_S_Start + 0x40 : __OPTION_SETTING_S_Start; + KEEP(*(.option_setting_bps_sec0)) + . = PROJECT_SECURE_OR_FLAT ? __OPTION_SETTING_S_Start + 0x44 : __OPTION_SETTING_S_Start; + KEEP(*(.option_setting_bps_sec1)) + . = PROJECT_SECURE_OR_FLAT ? __OPTION_SETTING_S_Start + 0x48 : __OPTION_SETTING_S_Start; + KEEP(*(.option_setting_bps_sec2)) + . = PROJECT_SECURE_OR_FLAT ? __OPTION_SETTING_S_Start + 0x4C : __OPTION_SETTING_S_Start; + KEEP(*(.option_setting_bps_sec3)) + . = PROJECT_SECURE_OR_FLAT ? __OPTION_SETTING_S_Start + 0x60 : __OPTION_SETTING_S_Start; + KEEP(*(.option_setting_pbps_sec0)) + . = PROJECT_SECURE_OR_FLAT ? __OPTION_SETTING_S_Start + 0x64 : __OPTION_SETTING_S_Start; + KEEP(*(.option_setting_pbps_sec1)) + . = PROJECT_SECURE_OR_FLAT ? __OPTION_SETTING_S_Start + 0x68 : __OPTION_SETTING_S_Start; + KEEP(*(.option_setting_pbps_sec2)) + . = PROJECT_SECURE_OR_FLAT ? __OPTION_SETTING_S_Start + 0x6C : __OPTION_SETTING_S_Start; + KEEP(*(.option_setting_pbps_sec3)) + . = PROJECT_SECURE_OR_FLAT ? __OPTION_SETTING_S_Start + 0x80 : __OPTION_SETTING_S_Start; + KEEP(*(.option_setting_ofs1_sel)) + . = PROJECT_SECURE_OR_FLAT ? __OPTION_SETTING_S_Start + 0x84 : __OPTION_SETTING_S_Start; + KEEP(*(.option_setting_ofs3_sel)) + . = PROJECT_SECURE_OR_FLAT ? __OPTION_SETTING_S_Start + 0x90 : __OPTION_SETTING_S_Start; + KEEP(*(.option_setting_banksel_sel)) + . = PROJECT_SECURE_OR_FLAT ? __OPTION_SETTING_S_Start + 0xC0 : __OPTION_SETTING_S_Start; + KEEP(*(.option_setting_bps_sel0)) + . = PROJECT_SECURE_OR_FLAT ? __OPTION_SETTING_S_Start + 0xC4 : __OPTION_SETTING_S_Start; + KEEP(*(.option_setting_bps_sel1)) + . = PROJECT_SECURE_OR_FLAT ? __OPTION_SETTING_S_Start + 0xC8 : __OPTION_SETTING_S_Start; + KEEP(*(.option_setting_bps_sel2)) + . = PROJECT_SECURE_OR_FLAT ? __OPTION_SETTING_S_Start + 0xCC : __OPTION_SETTING_S_Start; + KEEP(*(.option_setting_bps_sel3)) + __OPTION_SETTING_S_End = .; + } > OPTION_SETTING_S = 0xFF + + /* Symbol required for RA Configuration tool. */ + __tz_OPTION_SETTING_S_N = __OPTION_SETTING_S_End; +} diff --git a/hw/bsp/ra/linker/gcc/ra4m1.ld b/hw/bsp/ra/linker/gcc/ra4m1.ld new file mode 100644 index 000000000..218acbb2a --- /dev/null +++ b/hw/bsp/ra/linker/gcc/ra4m1.ld @@ -0,0 +1,22 @@ +RAM_START = 0x20000000; +RAM_LENGTH = 0x8000; +FLASH_START = 0x00000000; +FLASH_LENGTH = 0x40000; +DATA_FLASH_START = 0x40100000; +DATA_FLASH_LENGTH = 0x2000; +OPTION_SETTING_START = 0x00000000; +OPTION_SETTING_LENGTH = 0x0; +OPTION_SETTING_S_START = 0x80000000; +OPTION_SETTING_S_LENGTH = 0x0; +ID_CODE_START = 0x01010018; +ID_CODE_LENGTH = 0x20; +SDRAM_START = 0x80010000; +SDRAM_LENGTH = 0x0; +QSPI_FLASH_START = 0x60000000; +QSPI_FLASH_LENGTH = 0x0; +OSPI_DEVICE_0_START = 0x80020000; +OSPI_DEVICE_0_LENGTH = 0x0; +OSPI_DEVICE_1_START = 0x80030000; +OSPI_DEVICE_1_LENGTH = 0x0; + +INCLUDE fsp.ld diff --git a/hw/bsp/ra/linker/gcc/ra4m3.ld b/hw/bsp/ra/linker/gcc/ra4m3.ld new file mode 100644 index 000000000..7b3a63fbe --- /dev/null +++ b/hw/bsp/ra/linker/gcc/ra4m3.ld @@ -0,0 +1,22 @@ +RAM_START = 0x20000000; +RAM_LENGTH = 0x20000; +FLASH_START = 0x00000000; +FLASH_LENGTH = 0x100000; +DATA_FLASH_START = 0x08000000; +DATA_FLASH_LENGTH = 0x2000; +OPTION_SETTING_START = 0x0100A100; +OPTION_SETTING_LENGTH = 0x100; +OPTION_SETTING_S_START = 0x0100A200; +OPTION_SETTING_S_LENGTH = 0x100; +ID_CODE_START = 0x00000000; +ID_CODE_LENGTH = 0x0; +SDRAM_START = 0x80010000; +SDRAM_LENGTH = 0x0; +QSPI_FLASH_START = 0x60000000; +QSPI_FLASH_LENGTH = 0x4000000; +OSPI_DEVICE_0_START = 0x80020000; +OSPI_DEVICE_0_LENGTH = 0x0; +OSPI_DEVICE_1_START = 0x80030000; +OSPI_DEVICE_1_LENGTH = 0x0; + +INCLUDE fsp.ld diff --git a/hw/bsp/ra/linker/gcc/ra6m1.ld b/hw/bsp/ra/linker/gcc/ra6m1.ld new file mode 100644 index 000000000..91d27f74c --- /dev/null +++ b/hw/bsp/ra/linker/gcc/ra6m1.ld @@ -0,0 +1,22 @@ +RAM_START = 0x1FFE0000; +RAM_LENGTH = 0x40000; +FLASH_START = 0x00000000; +FLASH_LENGTH = 0x80000; +DATA_FLASH_START = 0x40100000; +DATA_FLASH_LENGTH = 0x2000; +OPTION_SETTING_START = 0x00000000; +OPTION_SETTING_LENGTH = 0x0; +OPTION_SETTING_S_START = 0x80000000; +OPTION_SETTING_S_LENGTH = 0x0; +ID_CODE_START = 0x0100A150; +ID_CODE_LENGTH = 0x10; +SDRAM_START = 0x80010000; +SDRAM_LENGTH = 0x0; +QSPI_FLASH_START = 0x60000000; +QSPI_FLASH_LENGTH = 0x4000000; +OSPI_DEVICE_0_START = 0x80020000; +OSPI_DEVICE_0_LENGTH = 0x0; +OSPI_DEVICE_1_START = 0x80030000; +OSPI_DEVICE_1_LENGTH = 0x0; + +INCLUDE fsp.ld diff --git a/tools/cmake/cpu/cortex-m4.cmake b/tools/cmake/cpu/cortex-m4.cmake index a0cf3498f..4e9bc242d 100644 --- a/tools/cmake/cpu/cortex-m4.cmake +++ b/tools/cmake/cpu/cortex-m4.cmake @@ -6,7 +6,9 @@ if (TOOLCHAIN STREQUAL "gcc") -mfpu=fpv4-sp-d16 ) - set(FREERTOS_PORT GCC_ARM_CM4F CACHE INTERNAL "") + if (NOT DEFINED FREERTOS_PORT) + set(FREERTOS_PORT GCC_ARM_CM4F CACHE INTERNAL "") + endif () elseif (TOOLCHAIN STREQUAL "iar") set(TOOLCHAIN_COMMON_FLAGS @@ -14,6 +16,8 @@ elseif (TOOLCHAIN STREQUAL "iar") --fpu VFPv4 ) - set(FREERTOS_PORT IAR_ARM_CM4F CACHE INTERNAL "") + if (NOT DEFINED FREERTOS_PORT) + set(FREERTOS_PORT IAR_ARM_CM4F CACHE INTERNAL "") + endif () endif () -- cgit v1.3.1