/*
 * The MIT License (MIT)
 *
 * Copyright (c) 2025 Ennebi Elettronica (https://ennebielettronica.com)
 *
 * Permission is hereby granted, free of charge, to any person obtaining a copy
 * of this software and associated documentation files (the "Software"), to deal
 * in the Software without restriction, including without limitation the rights
 * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
 * copies of the Software, and to permit persons to whom the Software is
 * furnished to do so, subject to the following conditions:
 *
 * The above copyright notice and this permission notice shall be included in
 * all copies or substantial portions of the Software.
 *
 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
 * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
 * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
 * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
 * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
 * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
 * THE SOFTWARE.
 *
 */

#ifndef TUSB_CONFIG_H_
#define TUSB_CONFIG_H_

#ifdef __cplusplus
 extern "C" {
#endif

//--------------------------------------------------------------------+
// Board Specific Configuration
//--------------------------------------------------------------------+

// RHPort number used for device can be defined by board.mk, default to port 0
#ifndef BOARD_TUD_RHPORT
#define BOARD_TUD_RHPORT      0
#endif

// RHPort max operational speed can defined by board.mk
#ifndef BOARD_TUD_MAX_SPEED
#define BOARD_TUD_MAX_SPEED   OPT_MODE_DEFAULT_SPEED
#endif

//--------------------------------------------------------------------
// COMMON CONFIGURATION
//--------------------------------------------------------------------

// defined by compiler flags for flexibility
#ifndef CFG_TUSB_MCU
#error CFG_TUSB_MCU must be defined
#endif

#ifndef CFG_TUSB_OS
#define CFG_TUSB_OS           OPT_OS_NONE
#endif

#ifndef CFG_TUSB_DEBUG
#define CFG_TUSB_DEBUG        0
#endif

// Enable Device stack
#define CFG_TUD_ENABLED       1

// Default is max speed that hardware controller could support with on-chip PHY
#define CFG_TUD_MAX_SPEED     BOARD_TUD_MAX_SPEED

/* USB DMA on some MCUs can only access a specific SRAM region with restriction on alignment.
 * Tinyusb use follows macros to declare transferring memory so that they can be put
 * into those specific section.
 * e.g
 * - CFG_TUSB_MEM SECTION : __attribute__ (( section(".usb_ram") ))
 * - CFG_TUSB_MEM_ALIGN   : __attribute__ ((aligned(4)))
 */
#ifndef CFG_TUSB_MEM_SECTION
#define CFG_TUSB_MEM_SECTION
#endif

#ifndef CFG_TUSB_MEM_ALIGN
#define CFG_TUSB_MEM_ALIGN        __attribute__ ((aligned(4)))
#endif

//--------------------------------------------------------------------
// DEVICE CONFIGURATION
//--------------------------------------------------------------------

#ifndef CFG_TUD_ENDPOINT0_SIZE
#define CFG_TUD_ENDPOINT0_SIZE    64
#endif

//------------- CLASS -------------//
#define CFG_TUD_MTP               1
#define CFG_TUD_MTP_EP_BUFSIZE    512
#define CFG_TUD_MTP_EP_CONTROL_BUFSIZE  16 // should be enough to hold data in MTP control request

//------------- MTP device info -------------//
#define CFG_TUD_MTP_DEVICEINFO_EXTENSIONS   "microsoft.com: 1.0; "
#define CFG_TUD_MTP_DEVICEINFO_SUPPORTED_OPERATIONS \
   MTP_OP_GET_DEVICE_INFO, \
   MTP_OP_OPEN_SESSION, \
   MTP_OP_CLOSE_SESSION, \
   MTP_OP_GET_STORAGE_IDS, \
   MTP_OP_GET_STORAGE_INFO, \
   MTP_OP_GET_OBJECT_HANDLES, \
   MTP_OP_GET_OBJECT_INFO, \
   MTP_OP_GET_OBJECT, \
   MTP_OP_GET_PARTIAL_OBJECT, \
   MTP_OP_DELETE_OBJECT, \
   MTP_OP_SEND_OBJECT_INFO, \
   MTP_OP_SEND_OBJECT, \
   MTP_OP_RESET_DEVICE, \
   MTP_OP_GET_DEVICE_PROP_DESC, \
   MTP_OP_GET_DEVICE_PROP_VALUE, \
   MTP_OP_SET_DEVICE_PROP_VALUE

#define CFG_TUD_MTP_DEVICEINFO_SUPPORTED_EVENTS \
    MTP_EVENT_OBJECT_ADDED

#define CFG_TUD_MTP_DEVICEINFO_SUPPORTED_DEVICE_PROPERTIES  \
    MTP_DEV_PROP_DEVICE_FRIENDLY_NAME

#define CFG_TUD_MTP_DEVICEINFO_CAPTURE_FORMATS \
    MTP_OBJ_FORMAT_UNDEFINED, \
    MTP_OBJ_FORMAT_ASSOCIATION, \
    MTP_OBJ_FORMAT_TEXT, \
    MTP_OBJ_FORMAT_PNG

#define CFG_TUD_MTP_DEVICEINFO_PLAYBACK_FORMATS \
    MTP_OBJ_FORMAT_UNDEFINED, \
    MTP_OBJ_FORMAT_ASSOCIATION, \
    MTP_OBJ_FORMAT_TEXT, \
    MTP_OBJ_FORMAT_PNG

#ifdef __cplusplus
 }
#endif

#endif /* TUSB_CONFIG_H_ */