/*
 * SPDX-FileCopyrightText: Copyright (c) 2023 Ha Thach (tinyusb.org)
 * SPDX-License-Identifier: MIT
 */

#ifndef TUSB_CP210X_H
#define TUSB_CP210X_H

// Protocol details can be found at AN571: CP210x Virtual COM Port Interface
// https://www.silabs.com/documents/public/application-notes/AN571.pdf

// parts are overtaken from vendors driver
// https://www.silabs.com/documents/public/software/cp210x-3.1.0.tar.gz

// Config request codes
#define CP210X_IFC_ENABLE      0x00
#define CP210X_SET_BAUDDIV     0x01
#define CP210X_GET_BAUDDIV     0x02
#define CP210X_SET_LINE_CTL    0x03 // Set parity, data bits, stop bits
#define CP210X_GET_LINE_CTL    0x04
#define CP210X_SET_BREAK       0x05
#define CP210X_IMM_CHAR        0x06
#define CP210X_SET_MHS         0x07 // Set DTR, RTS
#define CP210X_GET_MDMSTS      0x08 // Get modem status (DTR, RTS, CTS, DSR, RI, DCD)
#define CP210X_SET_XON         0x09
#define CP210X_SET_XOFF        0x0A
#define CP210X_SET_EVENTMASK   0x0B
#define CP210X_GET_EVENTMASK   0x0C
#define CP210X_SET_CHAR        0x0D
#define CP210X_GET_CHARS       0x0E
#define CP210X_GET_PROPS       0x0F
#define CP210X_GET_COMM_STATUS 0x10
#define CP210X_RESET           0x11
#define CP210X_PURGE           0x12
#define CP210X_SET_FLOW        0x13
#define CP210X_GET_FLOW        0x14
#define CP210X_EMBED_EVENTS    0x15
#define CP210X_GET_EVENTSTATE  0x16
#define CP210X_SET_CHARS       0x19
#define CP210X_GET_BAUDRATE    0x1D
#define CP210X_SET_BAUDRATE    0x1E
#define CP210X_VENDOR_SPECIFIC 0xFF // GPIO, Recipient must be Device

// SILABSER_IFC_ENABLE_REQUEST_CODE
#define CP210X_UART_ENABLE              0x0001
#define CP210X_UART_DISABLE             0x0000

// SILABSER_SET_BAUDDIV_REQUEST_CODE
#define CP210X_BAUD_RATE_GEN_FREQ     0x384000

// SILABSER_SET_LINE_CTL_REQUEST_CODE
#define CP210X_BITS_DATA_MASK           0x0f00
#define CP210X_BITS_DATA_5              0x0500
#define CP210X_BITS_DATA_6              0x0600
#define CP210X_BITS_DATA_7              0x0700
#define CP210X_BITS_DATA_8              0x0800
#define CP210X_BITS_DATA_9              0x0900

#define CP210X_BITS_PARITY_MASK         0x00f0
#define CP210X_BITS_PARITY_NONE         0x0000
#define CP210X_BITS_PARITY_ODD          0x0010
#define CP210X_BITS_PARITY_EVEN         0x0020
#define CP210X_BITS_PARITY_MARK         0x0030
#define CP210X_BITS_PARITY_SPACE        0x0040

#define CP210X_BITS_STOP_MASK           0x000f
#define CP210X_BITS_STOP_1              0x0000
#define CP210X_BITS_STOP_1_5            0x0001
#define CP210X_BITS_STOP_2              0x0002

// SILABSER_SET_BREAK_REQUEST_CODE
#define CP210X_BREAK_ON                 0x0001
#define CP210X_BREAK_OFF                0x0000

// SILABSER_SET_MHS_REQUEST_CODE
#define CP210X_MCR_DTR                  0x0001
#define CP210X_MCR_RTS                  0x0002
#define CP210X_MCR_ALL                  0x0003
#define CP210X_MSR_CTS                  0x0010
#define CP210X_MSR_DSR                  0x0020
#define CP210X_MSR_RING                 0x0040
#define CP210X_MSR_DCD                  0x0080
#define CP210X_MSR_ALL                  0x00F0

#define CP210X_CONTROL_WRITE_DTR        0x0100UL
#define CP210X_CONTROL_WRITE_RTS        0x0200UL

#define CP210X_LSR_BREAK                0x0001
#define CP210X_LSR_FRAMING_ERROR        0x0002
#define CP210X_LSR_HW_OVERRUN           0x0004
#define CP210X_LSR_QUEUE_OVERRUN        0x0008
#define CP210X_LSR_PARITY_ERROR         0x0010
#define CP210X_LSR_ALL                  0x001F

#endif //TUSB_CP210X_H