u-boot.git, branch LABEL_2004_01_29_1030

* Implement adaptive SDRAM timing configuration based on actual CPU

2004-01-29T09:22:58+00:00

  clock frequency for INCA-IP; fix problem with board hanging when
  switching from 150MHz to 100MHz

* Add PCMCIA CS support for BMS2003 board

* Add variable CPU clock for MPC859/866 systems (so far only TQM866M):

2004-01-24T20:25:54+00:00

  see doc/README.MPC866 for details;
  implement workaround for "SIU4" and "SIU9" silicon bugs on MPC866;
  calculate CPU clock frequency from PLL register values.

* Add support for 128 MB RAM on TQM8xxL/M modules

* Fix PS/2 keyboard problem caused by statically initialized variable

2004-01-21T20:46:28+00:00

  pointing to a location in flash

* Fix INCA-IP clock calculation: 400/3 = 133.3 MHz, not 130.

* The PS/2 mux on the BMS2003 board needs 450 ms after power on

2004-01-20T23:12:12+00:00

  before we can access it; add delay in case we are faster (with no
  CF card inserted)

* Cleanup of some init functions

* Make sure SCC Ethernet is always stopped by the time we boot Linux
  to avoid Linux crashes by early packets coming in.

* Accelerate flash accesses on LWMON board by using buffered writes

Fix typo in Makefile;

2004-01-18T18:21:54+00:00

fix problem with PARTNUM detection

[Strange. I _did_ check these in before. Seems SF restored an old

2004-01-16T00:30:56+00:00

version of the repository???]

* Patch by Reinhard Meyer, 09 Jan 2004:
  - add RTC support for MPC5200 based boards (requires RTC_XTAL)

* Add support for IDE LED on BMS2003 board
  (exclusive with status LED!)

* Add support for PS/2 keyboard (used with PS/2 multiplexor on
  BMS2003 board)

* Patches by Reinhard Meyer, 4 Jan 2004 + 7 Jan 2004:
  Add common files for "emk" boards

Add a common get_ram_size() function and modify the the

2004-01-06T22:38:14+00:00

board-specific files to invoke that common implementation.

Fix comment.

2004-01-06T11:32:21+00:00

Set default clock for INCA-IP to 150 MHz

2004-01-06T11:13:56+00:00

Prepare for 1.0.1 release

* Make BMS2003 use a separate config file to avoid #ifdef mess;

2004-01-04T22:51:12+00:00

  add I2C support; add support for DS1337 RTC

* Add CompactFlash support  for BMS2003 board

* Add support for status LED on BMS2003 board