u-boot.git, branch LABEL_2005_04_05_2345

Add support for MPC8220 based "sorcery" board.

2005-04-05T21:57:18+00:00

Add support for TQM8560 board

2005-04-05T16:26:47+00:00

* Add FEC support for TQM8540 board.

2005-04-04T23:43:44+00:00

  Interfaces are named as follows: "ENET1" - TSEC2, "ENET2" - FEC

* Patch by Martin Krause, 04 Apr 2005:
  Update default configuration for CMC_PU2 board.

Patch by Steven Scholz, 4 Apr 2005:

2005-04-04T12:44:11+00:00

- remove all references to CONFIG_INIT_CRITICAL for ARM based boards
- introduce two new configuration options instead:
  CONFIG_SKIP_LOWLEVEL_INIT and CONFIG_SKIP_RELOCATE_UBOOT

Use the same name (lowlevel_init) for all (ARM) boards

2005-04-04T12:36:04+00:00

Patch by Steven Scholz, 04 Apr 2005:

2005-04-04T12:23:03+00:00

Make sure that MDIO clock does not exceed 2.5 MHz on AT91

Fix timer code for ARM systems: make sure that udelay() does not

2005-04-04T12:08:28+00:00

reset timers so it's save to use udelay() in timeout code.

* Patch by Mathias K�ster, 23 Nov 2004:

2005-04-03T23:35:57+00:00

  add udelay support for the mcf5282 cpu

* Patch by Tolunay Orkun, 16 November 2004:
  fix incorrect onboard Xilinx CPLD base address

Patch by Jerry Van Baren, 08 Nov 2004:

2005-04-03T23:22:21+00:00

- Add low-boot option for MPC8260ADS board (if lowboot is selected,
  the jumper for the HRCW source should select flash. If lowboot is
  not selected, the jumper for the HRCW source should select the
  BCSR.
- change default load base address to 0x00400000

* Patch by Yuli Barcohen, 08 Nov 2004:

2005-04-03T23:11:38+00:00

  Add support for Analogue & Micro Rattler boards.
  Tested on Rattler8248.

* Patch by Andre Renaud, 08 Nov 2004:
  Fix watchdog support in common/lcd.c

* Patch by Marc Leeman, 05 Nov 2003:
  Enable all 4 PCMBRW buffers for the MPC8245 processor since the CPU
  bug only affects the XPC8245 processors