u-boot.git, branch U-Boot-0_4_6

* Make Ethernet autonegotiation on INCA-IP work for all clock rates;

2003-08-17T18:55:18+00:00

  allow selection of clock frequency as "make" target

* Implement memory autosizing code for IceCube boards

* Configure network port on INCA-IP for autonegotiation

* Fix overflow problem in network timeout code

* Patch by Richard Woodruff, 8 Aug 2003:
  Allow crc32 to be used at address 0x000 (crc32_no_comp, too).

Update for TQM board defaults:

2003-08-07T22:18:11+00:00

disable clocks_in_mhz, enable boot count limit

Removed tools/gdb from "make all" target. Added make target "gdbtools"

2003-08-07T15:04:48+00:00

in toplevel directory instead.  Removed astest.c from tools/gdb because
it is no longer relevant.

Disable debug print for normal use.

2003-08-07T14:52:18+00:00

Fix MPC5200 FEC driver

Removed the file tools/gdb/astest.c

2003-08-07T14:22:10+00:00

Removed tools/gdb from "make all" target. Added make target "gdbtools"

2003-08-07T14:20:31+00:00

in toplevel directory instead.  Removed astest.c from tools/gdb because
it is no longer relevant.

* Fix PCI support for MPC5200 / IceCube Board

2003-08-05T18:22:44+00:00

* Map ISP1362 USB OTG controller for NSCU board

2003-08-05T17:43:17+00:00

* Patch by Brad Parker, 02 Aug 2003:
  fix sc520_cdp problems

* Implement Boot Cycle Detection (Req. 2.3 of OSDL CGL Reqirements)

* Allow erase command to cross flash bank boundaries

Must enable timebase earlier on MPC5200

2003-07-31T22:56:30+00:00

* Patch by Scott McNutt, 21 Jul 2003:

2003-07-27T00:21:01+00:00

  Add support for LynuxWorks Kernel Downloadable Images (KDIs).
  Both LynxOS and BlueCat linux KDIs are supported.

* Patch by Richard Woodruff, 25 Jul 2003:
  use more reliable reset for OMAP/925T

* Patch by Nye Liu, 25 Jul 2003:
  fix typo in mpc8xx.h

* Patch by Richard Woodruff, 24 Jul 2003:
  Fixes for cmd_nand.c:
  - Fixed null dereferece which could result in incorrect ECC values.
  - Added support for devices with no Ready/Busy signal hooked up.
  - Added OMAP1510 read/write protect handling.
  - Fixed nand.h's ECCPOS. A conflict existed with POS5 and badblock
    for non-JFFS2.
  - Switched default ECC to be JFFS2.