u-boot.git, branch v2010.09-rc1

Prepare v2010.09-rc1

2010-09-09T22:16:19+00:00

Coding style cleanup.

Signed-off-by: Wolfgang Denk

Merge branch 'master' of git://git.denx.de/u-boot-arm

2010-09-09T19:39:46+00:00

MX51: Update responsible for mx51evk

2010-09-09T17:55:22+00:00

Signed-off-by: Stefano Babic

Merge branch 'master' of git://git.denx.de/u-boot-ti

2010-09-09T17:55:02+00:00

bedbug_860.c, bedbug_603e.c: Fix return type to silence compile warnings.

2010-09-08T20:02:54+00:00

commit 47e26b1b "cmd_usage(): simplify return code handling" caused
the following compile warnings:

bedbug_860.c: In function 'bedbug860_do_break':
bedbug_860.c:73: warning: 'return' with a value, in function returning void
bedbug_860.c:121: warning: 'return' with a value, in function returning void

Fix the return type.

Actually these files could need some cleanup - commands should
return proper error codes, and there are coding style issues.
=> To be fixed later.

Signed-off-by: Wolfgang Denk

ARMV7: Fix pad mux for Panda LEDs

2010-09-08T18:51:51+00:00

Correctly set PAD1_FREF_CLK4_REQ and PAD0_FREF_CLK4_OUT to enable and
activate both LEDs while setting pad mux.

Since this increases the line length, this patch also adjusts the white
space in this section of code to allign the pad mux signal description
comments.

Signed-off-by: Ricardo Salveti de Araujo 
Signed-off-by: Steve Sakoman 
Signed-off-by: Sandeep Paulraj

ARMV7: OMAP: Overo: Autodetect presence/absence of transceiver on mmc2

2010-09-08T18:51:45+00:00

An upcoming version of Overo uses a Wifi/BT module with 1.8V signaling,
eliminating the need for an external transceiver to handle the level
shifting.  This patch detects whether an external transceiver is present
and adjusts the pinmux settings as appropriate.

Signed-off-by: Steve Sakoman 
Signed-off-by: Sandeep Paulraj

ARMV7: OMAP3: Add support for Beagle xM

2010-09-08T18:51:40+00:00

This patch adds support for the Beagle xM.  It uses the board ID
GPIO bits to recognize this revision and perform appropriate setup.

Signed-off-by: Steve Sakoman 
Signed-off-by: Sandeep Paulraj

ARMV7: OMAP3: Add CONFIG_SYS_NAND_QUIET_TEST to Beagle and Overo configs

2010-09-08T18:51:35+00:00

Future versions of these boards have options for POP memory with no NAND.
This option prevents display of error messages when no NAND is detected.

Signed-off-by: Steve Sakoman 
Signed-off-by: Sandeep Paulraj

mtd: nand: supress 'unknown NAND' warning if no nand is found

2010-09-08T18:51:29+00:00

This printk was added recently and results in ugly output on systems
with no NAND:

NAND:  nand_get_flash_type: unknown NAND device: Manufacturer ID: 0x00, Chip ID: 0x00 0 MiB

instead of:

NAND:  0 MiB

Signed-off-by: Steve Sakoman 
Acked-by: Scott Wood 
Signed-off-by: Sandeep Paulraj