u-boot.git, branch v2012.10-rc3 Unnamed repository; edit this file 'description' to name the repository. Prepare v2012.10-rc3 2012-10-08T18:20:28+00:00 Tom Rini trini@ti.com 2012-10-08T18:20:28+00:00 c7c63221439ad87a8c05e7b42f9eae32ec7cc2d4 Signed-off-by: Tom Rini <trini@ti.com> 
Signed-off-by: Tom Rini <trini@ti.com>
arm: armv7: omap3: Fix restore sequence in lowlevel_init 2012-10-08T18:15:04+00:00 Albert ARIBAUD albert.u.boot@aribaud.net 2012-10-07T09:24:10+00:00 dec96689caac25780174b4899032faf788824ac4 The restore sequence in lowlevel_init was in the wrong order, causing lr to lose its original value and be set equal to ip instead. Also, its use of the stack clashes with that of s_init, so move the s_init call after the restore and turn it into a tail-optimized branch. Signed-off-by: Albert ARIBAUD <albert.u.boot@aribaud.net> Tested-by: Jeroen Hofstee <jeroen@myspectrum.nl> 
The restore sequence in lowlevel_init was in the wrong order,
causing lr to lose its original value and be set equal to ip
instead. Also, its use of the stack clashes with that of
s_init, so move the s_init call after the restore and turn
it  into a tail-optimized branch.

Signed-off-by: Albert ARIBAUD <albert.u.boot@aribaud.net>
Tested-by: Jeroen Hofstee <jeroen@myspectrum.nl>
yaffs2: Fix GCC 4.6 compile warnings 2012-10-08T18:15:04+00:00 Anatolij Gustschin agust@denx.de 2012-10-05T23:31:03+00:00 8cc64bafc00415877ed51769ca90cb562ded5c01 Fix: yaffs_guts.c: In function 'yaffs_check_chunk_erased': yaffs_guts.c:324:6: warning: variable 'result' set but not used [-Wunused-but-set-variable] yaffs_guts.c: In function 'yaffs_verify_chunk_written': yaffs_guts.c:352:6: warning: variable 'result' set but not used [-Wunused-but-set-variable] yaffs_guts.c: In function 'yaffs_grab_chunk_cache': yaffs_guts.c:1488:6: warning: variable 'pushout' set but not used [-Wunused-but-set-variable] yaffs_guts.c: In function 'yaffs_check_obj_details_loaded': yaffs_guts.c:3180:6: warning: variable 'alloc_failed' set but not used [-Wunused-but-set-variable] yaffs_guts.c:3179:6: warning: variable 'result' set but not used [-Wunused-but-set-variable] yaffs_guts.c: In function 'yaffs_update_oh': yaffs_guts.c:3288:6: warning: variable 'result' set but not used [-Wunused-but-set-variable] yaffs_guts.c: In function 'yaffs_get_obj_name': yaffs_guts.c:4447:7: warning: variable 'result' set but not used [-Wunused-but-set-variable] yaffs_summary.c: In function 'yaffs_summary_read': yaffs_summary.c:194:6: warning: variable 'sum_tags_bytes' set but not used [-Wunused-but-set-variable] yaffs_verify.c: In function 'yaffs_verify_file': yaffs_verify.c:227:6: warning: variable 'actual_depth' set but not used [-Wunused-but-set-variable] yaffs_yaffs1.c: In function 'yaffs1_scan': yaffs_yaffs1.c:26:6: warning: variable 'result' set but not used [-Wunused-but-set-variable] yaffs_yaffs2.c: In function 'yaffs2_scan_chunk': yaffs_yaffs2.c:949:6: warning: variable 'result' set but not used [-Wunused-but-set-variable] yaffs_yaffs2.c: In function 'yaffs2_scan_backwards': yaffs_yaffs2.c:1352:6: warning: variable 'deleted' set but not used [-Wunused-but-set-variable] Signed-off-by: Anatolij Gustschin <agust@denx.de> Cc: Charles Manning <cdhmanning@gmail.com> Tested-by: Albert ARIBAUD <albert.u.boot@aribaud.net> 
Fix:
yaffs_guts.c: In function 'yaffs_check_chunk_erased':
yaffs_guts.c:324:6: warning: variable 'result' set but not used
[-Wunused-but-set-variable]
yaffs_guts.c: In function 'yaffs_verify_chunk_written':
yaffs_guts.c:352:6: warning: variable 'result' set but not used
[-Wunused-but-set-variable]
yaffs_guts.c: In function 'yaffs_grab_chunk_cache':
yaffs_guts.c:1488:6: warning: variable 'pushout' set but not used
[-Wunused-but-set-variable]
yaffs_guts.c: In function 'yaffs_check_obj_details_loaded':
yaffs_guts.c:3180:6: warning: variable 'alloc_failed' set but not used
[-Wunused-but-set-variable]
yaffs_guts.c:3179:6: warning: variable 'result' set but not used
[-Wunused-but-set-variable]
yaffs_guts.c: In function 'yaffs_update_oh':
yaffs_guts.c:3288:6: warning: variable 'result' set but not used
[-Wunused-but-set-variable]
yaffs_guts.c: In function 'yaffs_get_obj_name':
yaffs_guts.c:4447:7: warning: variable 'result' set but not used
[-Wunused-but-set-variable]
yaffs_summary.c: In function 'yaffs_summary_read':
yaffs_summary.c:194:6: warning: variable 'sum_tags_bytes' set but not
used [-Wunused-but-set-variable]
yaffs_verify.c: In function 'yaffs_verify_file':
yaffs_verify.c:227:6: warning: variable 'actual_depth' set but not used
[-Wunused-but-set-variable]
yaffs_yaffs1.c: In function 'yaffs1_scan':
yaffs_yaffs1.c:26:6: warning: variable 'result' set but not used
[-Wunused-but-set-variable]
yaffs_yaffs2.c: In function 'yaffs2_scan_chunk':
yaffs_yaffs2.c:949:6: warning: variable 'result' set but not used
[-Wunused-but-set-variable]
yaffs_yaffs2.c: In function 'yaffs2_scan_backwards':
yaffs_yaffs2.c:1352:6: warning: variable 'deleted' set but not used
[-Wunused-but-set-variable]

Signed-off-by: Anatolij Gustschin <agust@denx.de>
Cc: Charles Manning <cdhmanning@gmail.com>
Tested-by: Albert ARIBAUD <albert.u.boot@aribaud.net>
disk: part_dos: don't claim whole-disk FAT filesystems 2012-10-08T18:15:04+00:00 Stephen Warren swarren@nvidia.com 2012-10-05T13:17:40+00:00 d1efb6442a0a0eec1933fce500f69008e2df70fd Logically, a disk that contains a raw FAT filesystem does not in fact have a partition table. However, test_part_dos() was claiming that such disks did in fact have a DOS-style partition table. This caused get_device_and_partition() not to return a whole-disk disk_partition_t, since part_type != PART_TYPE_UNKNOWN. part_dos.c's print_partition_extended() detected the raw FAT filesystem condition and printed a fake partition table that encompassed the whole disk. However, part_dos.c's get_partition_info_extended() did not return any valid partitions in this case. This combination caused get_device_and_partition() not to find any valid partitions, and hence to return an error. Fix test_part_dos() not to claim that raw FAT filesystems are DOS partition tables. In turn, this causes get_device_and_partition() to return a whole-disk disk_partition_t, and hence the following commands work: fatls mmc 0 / fatls mmc 0:auto / An alternative would be to modify print_partition_extended() to detect raw FAT filesystems, just like print_partition_extended() does, and to return a fake partition in this case. However, this seems logically incorrect, and also duplicates code, since get_device_and_partition() falls back to returning a whole-disk partition when there is no partition table on the device. Signed-off-by: Stephen Warren <swarren@nvidia.com> 
Logically, a disk that contains a raw FAT filesystem does not in fact
have a partition table. However, test_part_dos() was claiming that such
disks did in fact have a DOS-style partition table. This caused
get_device_and_partition() not to return a whole-disk disk_partition_t,
since part_type != PART_TYPE_UNKNOWN.

part_dos.c's print_partition_extended() detected the raw FAT filesystem
condition and printed a fake partition table that encompassed the whole
disk.

However, part_dos.c's get_partition_info_extended() did not return any
valid partitions in this case. This combination caused
get_device_and_partition() not to find any valid partitions, and hence
to return an error.

Fix test_part_dos() not to claim that raw FAT filesystems are DOS
partition tables. In turn, this causes get_device_and_partition() to
return a whole-disk disk_partition_t, and hence the following commands
work:

fatls mmc 0 /
fatls mmc 0:auto /

An alternative would be to modify print_partition_extended() to detect
raw FAT filesystems, just like print_partition_extended() does, and to
return a fake partition in this case. However, this seems logically
incorrect, and also duplicates code, since get_device_and_partition()
falls back to returning a whole-disk partition when there is no partition
table on the device.

Signed-off-by: Stephen Warren <swarren@nvidia.com>
FAT: check for partition 0 not 1 for whole-disk fs 2012-10-08T18:15:04+00:00 Stephen Warren swarren@nvidia.com 2012-10-05T13:17:39+00:00 bd1a7e3034006ec121d35d745fd455212a56f7fd The recent switch to use get_device_and_partition() from do_fat_ls() broke the ability to access a FAT filesystem directly on a whole device; FAT only works within a partition on a device. This change makes e.g. "fatls mmc 0:0" work; explicitly requesting partition ID 0 is something that get_device_and_partition() fully supports. However, fat_register_device() expects partition ID 1 to be used in the full-disk case; partition ID 1 was previously implicitly specified when the user didn't actually specify a partition ID. Update fat_register_device() to expect the correct ID. This change does imply that if a user explicitly executes "fatls mmc 0:1" then this will fail, and may be a change in behaviour. Note that this still prevents "fatls mmc 0:auto" from working. The next patch will fix that. Signed-off-by: Stephen Warren <swarren@nvidia.com> 
The recent switch to use get_device_and_partition() from do_fat_ls()
broke the ability to access a FAT filesystem directly on a whole device;
FAT only works within a partition on a device.

This change makes e.g. "fatls mmc 0:0" work; explicitly requesting
partition ID 0 is something that get_device_and_partition() fully
supports. However, fat_register_device() expects partition ID 1 to be
used in the full-disk case; partition ID 1 was previously implicitly
specified when the user didn't actually specify a partition ID. Update
fat_register_device() to expect the correct ID.

This change does imply that if a user explicitly executes "fatls mmc 0:1"
then this will fail, and may be a change in behaviour.

Note that this still prevents "fatls mmc 0:auto" from working. The next
patch will fix that.

Signed-off-by: Stephen Warren <swarren@nvidia.com>
arm: rmobile: bugfix: wrong register saving in lowlevel_init 2012-10-08T18:15:04+00:00 Tetsuyuki Kobayashi koba@kmckk.co.jp 2012-10-04T18:39:22+00:00 03eecab9a1ba5f0226987a6ea58eb75a41d23408 lowlevel_init() of rmobile badly assumed that ip register holds return address. The commit "63ee53a7 armv7 cpu_init_crit: Simplify code" breaks this assumption. This patch removes this bad assumption and simplify code. Signed-off-by: Tetsuyuki Kobayashi <koba@kmckk.co.jp> 
lowlevel_init() of rmobile badly assumed that ip register holds return address.
The commit "63ee53a7 armv7 cpu_init_crit: Simplify code" breaks this assumption.
This patch removes this bad assumption and simplify code.

Signed-off-by: Tetsuyuki Kobayashi <koba@kmckk.co.jp>
ide: Correct IDE_BUS(dev) macro 2012-10-08T18:12:08+00:00 Luka Perkov uboot@lukaperkov.net 2012-05-14T09:29:10+00:00 8a10180d62bb50a1f19441494bf9a5cea29ccfda The IDE_BUS(dev) macro was previously doing dev >> 1. This however is a mis-match of the usage in common/cmd_ide.c and would cause boards with multiple ports / devices to not correctly detect all devices. For more details please see: http://lists.denx.de/pipermail/u-boot/2012-April/122525.html [Tom Rini: Reword commit message only] Tested-by: Luka Perkov <uboot@lukaperkov.net> Signed-off-by: Simon Baatz <gmbnomis@gmail.com> Signed-off-by: Tom Rini <trini@ti.com> 
The IDE_BUS(dev) macro was previously doing dev >> 1.  This however is a
mis-match of the usage in common/cmd_ide.c and would cause boards with
multiple ports / devices to not correctly detect all devices.  For more
details please see:
http://lists.denx.de/pipermail/u-boot/2012-April/122525.html

[Tom Rini: Reword commit message only]

Tested-by: Luka Perkov <uboot@lukaperkov.net>
Signed-off-by: Simon Baatz <gmbnomis@gmail.com>
Signed-off-by: Tom Rini <trini@ti.com>
GPIO: pca953x: fix error reporting 2012-10-08T18:12:07+00:00 Laurence Withers lwithers@guralp.com 2012-07-25T03:55:48+00:00 633efe9c2356be452ab79e964e3a83d78648a62c Use the standard CMD_RET_* constants to clearly report errors from the pca953x command. In addition, print error messages when I2C communication fails. Signed-off-by: Laurence Withers <lwithers@guralp.com> 
Use the standard CMD_RET_* constants to clearly report errors from the
pca953x command. In addition, print error messages when I2C communication
fails.

Signed-off-by: Laurence Withers <lwithers@guralp.com>
GPIO: pca953x: fix spelling in help 2012-10-08T18:12:07+00:00 Laurence Withers lwithers@guralp.com 2012-07-25T03:55:47+00:00 d75bc03f452f952dd3c997d3b524417dd614b58b Signed-off-by: Laurence Withers <lwithers@guralp.com> 
Signed-off-by: Laurence Withers <lwithers@guralp.com>
ml507: Fix Xilinx uartlite driver hang 2012-10-08T18:12:07+00:00 Rommel Custodio sessyargc+uboot@gmail.com 2012-09-24T13:27:05+00:00 6538397c562544e41a8c08b36327f1d02488f3f5 The default configuration for ml507 will generate a hang() in the Xilinx uartlite driver. userial_ports[] in drivers/serial/serial_xuartlite.c does not get initialized properly. CONFIG_SERIAL_BASE is unused. XILINX_UARTLITE_BASEADDR is used instead. Signed-off-by: Rommel Custodio <sessyargc+uboot@gmail.com> 
The default configuration for ml507 will generate a hang() in the
Xilinx uartlite driver.

userial_ports[] in drivers/serial/serial_xuartlite.c does not get
initialized properly. CONFIG_SERIAL_BASE is unused.
XILINX_UARTLITE_BASEADDR is used instead.

Signed-off-by: Rommel Custodio <sessyargc+uboot@gmail.com>