u-boot.git, branch v2014.01 Unnamed repository; edit this file 'description' to name the repository. Prepare v2014.01 2014-01-20T22:52:59+00:00 Tom Rini trini@ti.com 2014-01-20T22:52:59+00:00 b44bd2c73c4cfb6e3b9e7f8cf987e8e39aa74a0b Signed-off-by: Tom Rini <trini@ti.com> 
Signed-off-by: Tom Rini <trini@ti.com>
fdt_support.c: Correct linux,initrd-start/end setting 2014-01-20T22:45:33+00:00 Tom Rini trini@ti.com 2014-01-20T22:45:33+00:00 be6d42669784565d257be011a502881f5ec87229 The change to add 64bit initrd support broke 32bit initrd support as it always set 64bits worth of data into the properties, even on 32bit systems. The fix is to use addr_cell_len (which already says how much data is in 'tmp') to set the property, rather than always setting 8. Thanks to Stephen Warren for pointing out the fix here. Reported-by: Otavio Salvador <otavio@ossystems.com.br> Signed-off-by: Tom Rini <trini@ti.com> 
The change to add 64bit initrd support broke 32bit initrd support as it
always set 64bits worth of data into the properties, even on 32bit
systems.  The fix is to use addr_cell_len (which already says how much
data is in 'tmp') to set the property, rather than always setting 8.
Thanks to Stephen Warren for pointing out the fix here.

Reported-by: Otavio Salvador <otavio@ossystems.com.br>
Signed-off-by: Tom Rini <trini@ti.com>
ARM: bcm2835: fix mailbox timeout 2014-01-20T22:11:39+00:00 Stephen Warren swarren@wwwdotorg.org 2014-01-14T02:50:12+00:00 004c10598b648341c08ebcbf77e9385a064aec47 My original intention was to have a 100ms timeout. However, the timer operations used return values in ms not us, so we ended up with a 100s timeout instead. Fixing this exposes that some operations need longer to operate than 100ms, so bump the timeout up to a whole second. Reported-by: Andre Heider <a.heider@gmail.com> Reviewed-by: Andre Heider <a.heider@gmail.com> Signed-off-by: Stephen Warren <swarren@wwwdotorg.org> 
My original intention was to have a 100ms timeout. However, the timer
operations used return values in ms not us, so we ended up with a 100s
timeout instead. Fixing this exposes that some operations need longer
to operate than 100ms, so bump the timeout up to a whole second.

Reported-by: Andre Heider <a.heider@gmail.com>
Reviewed-by: Andre Heider <a.heider@gmail.com>
Signed-off-by: Stephen Warren <swarren@wwwdotorg.org>
ARM: rpi_b: power on SDHCI and USB HW modules 2014-01-20T22:11:39+00:00 Stephen Warren swarren@wwwdotorg.org 2014-01-14T02:50:11+00:00 f66f2aa265f00d4fcf49cdfb23bcfd64360b291d Send RPC commands to the VideoCore to turn on the SDHCI and USB modules. For SDHCI this isn't needed in practice, since the firmware already turned on the power in order to load U-Boot. However, it's best to be explicit. For USB, this is necessary, since the module isn't powered otherwise. This will allow the kernel USB driver to work. Signed-off-by: Stephen Warren <swarren@wwwdotorg.org> 
Send RPC commands to the VideoCore to turn on the SDHCI and USB modules.
For SDHCI this isn't needed in practice, since the firmware already
turned on the power in order to load U-Boot. However, it's best to be
explicit. For USB, this is necessary, since the module isn't powered
otherwise. This will allow the kernel USB driver to work.

Signed-off-by: Stephen Warren <swarren@wwwdotorg.org>
spl: common: Properly ignore spl/Makefile in .gitignore 2014-01-20T15:09:51+00:00 Dan Murphy dmurphy@ti.com 2014-01-16T17:23:28+00:00 86a8b3a207ac34f453607a52a4d702bb67789ea2 The spl directory is ignored by git as these objects are created during spl creation. The only file not created is the Makefile. This file can be modified and checked in via git. Due to the order of rule precedence having the whole directory ignored first then indicating not to ignore the Makefile is not correct the message to force adding the Makefile is still shown. So reorder the .gitignore for the Makefile and indicate that the Makefile does not need to be ignored first and then indicate everything else in spl should be ignored after wards. Signed-off-by: Dan Murphy <dmurphy@ti.com> 
The spl directory is ignored by git as these objects are created
during spl creation.  The only file not created is the Makefile.

This file can be modified and checked in via git.

Due to the order of rule precedence having the whole directory
ignored first then indicating not to ignore the Makefile is not correct
the message to force adding the Makefile is still shown.

So reorder the .gitignore for the Makefile and indicate that the Makefile
does not need to be ignored first and then indicate everything else in spl
should be ignored after wards.

Signed-off-by: Dan Murphy <dmurphy@ti.com>
.gitignore: ignore u-boot.elf and tools/relocate-rela 2014-01-20T15:09:51+00:00 Masahiro Yamada yamada.m@jp.panasonic.com 2014-01-14T01:39:34+00:00 84977e44eb678a06f70571695ade5f834b29c377 Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com> 
Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
yaffs2: Remove block number check from summary verification 2014-01-20T15:09:51+00:00 Charles Manning cdhmanning@gmail.com 2014-01-20T02:51:59+00:00 55283635a0f696cc2316120de49672be7a418735 The summary already has other verification. This one is not needed. The check caused summaries to be ignored if they were not on the numbered block. This caused problems when a summary was embedded in an image and the image is written to a flash with bad blocks. Signed-off-by: Charles Manning <cdhmanning@gmail.com> 
The summary already has other verification. This one is not needed.

The check caused summaries to be ignored if they were not on the
numbered block. This caused problems when a summary was embedded in an
image and the image is written to a flash with bad blocks.

Signed-off-by: Charles Manning <cdhmanning@gmail.com>
ext4fs: fix "invalid extent block" error 2014-01-20T15:09:40+00:00 Ionut Nicu ioan.nicu.ext@nsn.com 2014-01-13T11:00:08+00:00 b5bbac1a9b07016602559ff483df265fef6c1f83 For files where we actually have extent indexes following an extent header (ext_block->eh_depth != 0), the do/while loop from ext4fs_get_extent_block() does not select the proper extent index structure. For example, if we have: ext_block->eh_depth = 1 ext_block->eh_entries = 1 fileblock = 0 index[0].ei_block = 0 the do/while loop will exit with i set to 0 and the ext4fs_get_extent_block() function will return 0, even if there was a valid extent index structure following the header. Signed-off-by: Ionut Nicu <ioan.nicu.ext@nsn.com> Signed-off-by: Mathias Rulf <mathias.rulf@nsn.com> 
For files where we actually have extent indexes following
an extent header (ext_block->eh_depth != 0), the do/while
loop from ext4fs_get_extent_block() does not select the
proper extent index structure.

For example, if we have:

ext_block->eh_depth = 1
ext_block->eh_entries = 1
fileblock = 0
index[0].ei_block = 0

the do/while loop will exit with i set to 0 and the
ext4fs_get_extent_block() function will return 0, even if
there was a valid extent index structure following the
header.

Signed-off-by: Ionut Nicu <ioan.nicu.ext@nsn.com>
Signed-off-by: Mathias Rulf <mathias.rulf@nsn.com>
ext4fs: use EXT2_BLOCK_SIZE instead of fs->blksz 2014-01-20T15:09:40+00:00 Ionut Nicu ioan.nicu.ext@nsn.com 2014-01-13T10:59:24+00:00 470173274d9ceb18a7140ef93e20be6c2236e7d9 Using fs->blksz in ext4fs_get_extent_block() is not correct since fs->blksz is not initialized on the read path. Use EXT2_BLOCK_SIZE() instead which will produce the desired output. Signed-off-by: Ionut Nicu <ioan.nicu.ext@nsn.com> Signed-off-by: Mathias Rulf <mathias.rulf@nsn.com> 
Using fs->blksz in ext4fs_get_extent_block() is not
correct since fs->blksz is not initialized on the
read path. Use EXT2_BLOCK_SIZE() instead which will
produce the desired output.

Signed-off-by: Ionut Nicu <ioan.nicu.ext@nsn.com>
Signed-off-by: Mathias Rulf <mathias.rulf@nsn.com>
board:universal: fix i2c adapter 2014-01-20T15:09:40+00:00 Piotr Wilczek p.wilczek@samsung.com 2014-01-14T07:15:07+00:00 c47817be257277f6445ea77bbf00954377ca9802 Universal uses only one adapter I2C_0. Signed-off-by: Piotr Wilczek <p.wilczek@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Acked-by: Przemyslaw Marczak <p.marczak@samsung.com> 
Universal uses only one adapter I2C_0.

Signed-off-by: Piotr Wilczek <p.wilczek@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Acked-by: Przemyslaw Marczak <p.marczak@samsung.com>