Signed-off-by: Tom Rini <trini@konsulko.com>

AM335x-based 'Gumstix Pepper' SBCs and variants use different types of
RAM (DDR2 vs DDR3 with DDR3 being the default).  Detect the board type
by reading the factory-programmed EEPROM [1] and use this to select any
runtime boot options such as RAM type.

[1] http://elinux.org/BeagleBoardPinMux#List_of_Vendor_and_Device_IDs

Signed-off-by: Adam YH Lee <adam.yh.lee@gmail.com>
Signed-off-by: Ash Charles <ashcharles@gmail.com>

This patch adds the feature to only stop the autobooting, and therefor
boot into the U-Boot prompt, when the input string / password matches
a values that is encypted via a SHA256 hash and saved in the environment.

This feature is enabled by defined these config options:
     CONFIG_AUTOBOOT_KEYED
     CONFIG_AUTOBOOT_STOP_STR_SHA256

Signed-off-by: Stefan Roese <sr@denx.de>
Reviewed-by: Simon Glass <sjg@chromium.org>

This patch moves the following config options to Kconfig:

CONFIG_AUTOBOOT_KEYED
CONFIG_AUTOBOOT_PROMPT
CONFIG_AUTOBOOT_DELAY_STR
CONFIG_AUTOBOOT_STOP_STR
AUTOBOOT_KEYED_CTRLC

Signed-off-by: Stefan Roese <sr@denx.de>
Reviewed-by: Simon Glass <sjg@chromium.org>
[trini: Drop ip04 and pm9263 configs/ additions, those boards previously
 set CONFIG_AUTOBOOT_PROMPT but never used it, re-run savedefconfig over
 all boards that did change. Make digsy_mtc_* string include seconds to
 match others and not warn. ]
Signed-off-by: Tom Rini <trini@konsulko.com>
Cc: Masahiro Yamada <yamada.masahiro@socionext.com>

These defines for a 2nd autoboot stop and delay string are nearly unused. Only
sc3 defines CONFIG_AUTOBOOT_DELAY_STR2. And a patch to remove this most likely
unmaintained board is also posted to the list.

By removing these defines the code will become cleaner and moving the remaining
compile options to Kconfig will get easier.

Signed-off-by: Stefan Roese <sr@denx.de>
Reviewed-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Cc: Wolfgang Denk <wd@denx.de>
Cc: Heiko Schocher <hs@denx.de>

I might have missed something, but I failed to use the escape char '\'
in strings. To pass a printf format string like "foo %d bar\n" via
Kconfig to the code.

Right now its not possible to use the escape character '\' in Kconfig
string values correctly to e.g. set this string value "test output\n".
The '\n' will be converted to 'n'.

The current implementation removes some of the '\' chars from the input
string in conf_set_sym_val(). Examples:

'\'	-> ''
'\\'	-> '\'
'\\\'	-> '\'
'\\\\'	-> '\\'
...

And then doubles the backslash chars in the output string in
sym_escape_string_value(). Example:

'\'	-> ''	-> ''
'\\'	-> '\'	-> '\\'
'\\\'	-> '\'	-> '\\'
'\\\\'	-> '\\'	-> '\\\\'
...

As you see in these examples, its impossible to generate a single '\'
charater in the output string as its needed for something like '\n'.

This patch now changes this behavior to not drop some backslashes in
conf_set_sym_val() and to not add new backslashes in the resulting
output string. Removing the function sym_escape_string_value()
completely as its not needed anymore.

Signed-off-by: Stefan Roese <sr@denx.de>
Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Cc: Tom Rini <trini@konsulko.com>

max_freq in print_cpuinfo is used only with
imx6.

Signed-off-by: Stefano Babic <sbabic@denx.de>

On this bus there is a EEPROM containing EDID and ddr3
calibration information.

Signed-off-by: Christian Gmeiner <christian.gmeiner@gmail.com>

Make it possible to use the i2c bus in SPL.

Signed-off-by: Christian Gmeiner <christian.gmeiner@gmail.com>