u-boot.git, branch v2015.10-rc1

Prepare v2015.10-rc1

2015-08-03T14:52:14+00:00

Signed-off-by: Tom Rini

fsl_esdhc.c: Always make check_and_invalidate_dcache_range available

2015-08-02T14:27:52+00:00

This function is called from esdhc_send_cmd so we need it available to
everyone.

Signed-off-by: Tom Rini

Merge branch 'master' of git://www.denx.de/git/u-boot-imx

2015-08-02T11:40:37+00:00

arm: mx6: tqma6: fix build for WRU-IV baseboard

2015-08-02T09:12:41+00:00

Fix:
 undefined reference to `spi_flash_free'
 undefined reference to `spi_flash_probe'

Signed-off-by: Stefano Babic 
CC: Stefan Roese 
Cc: Markus Niebel 
Acked-by: Stefan Roese

imx: mx6ul_14x14_evk add basic board support

2015-08-02T09:05:09+00:00

1. Add USDHC, I2C, UART, 74LV, USB, QSPI support.
2. Support SPL
3. CONFIG_MX6UL_14X14_EVK_EMMC_REWORK is introduced, this board default
   supports sd for usdhc2, but can do hardware rework to make usdhc2 support
   emmc.

Boot Log:
U-Boot SPL 2015.07-rc3-00124-g35d727b (Jul 20 2015 - 18:40:59)
reading u-boot.img
reading u-boot.img

U-Boot 2015.07-rc3-00124-g35d727b (Jul 20 2015 - 18:40:59 +0800)

CPU:   Freescale i.MX6UL rev1.0 792 MHz (running at 396 MHz)
CPU:   Commercial temperature grade (0C to 95C)CPU:   Thermal invalid data, fuse: 0x0
 - invalid sensor device
 Reset cause: POR
 Board: MX6UL 14x14 EVK
 I2C:   ready
 DRAM:  512 MiB
 MMC:   FSL_SDHC: 0, FSL_SDHC: 1
 *** Warning - bad CRC, using default environment

 In:    serial
 Out:   serial
 Err:   serial
 Net:   CPU Net Initialization Failed
 No ethernet found.
 Hit any key to stop autoboot:  0

Signed-off-by: Peng Fan

imx: imx6_spl add mx6ul support

2015-08-02T09:05:09+00:00

i.MX6UL's DRAM space starts from 0x80000000, same to i.MX6SX, so use
same address with i.MX6SX.

Signed-off-by: Peng Fan

imx:mx6ul add dram spl configuration and header file

2015-08-02T09:05:09+00:00

1. Define two structures mx6ul_iomux_ddr_regs and mx6ul_iomux_grp_regs.
2. Add a new function mx6ul_dram_iocfg to configure dram io.
3. Refactor MMDC1 macro, discard "#ifdef CONFIG_MX6SX". Since
   only mmdc0 channel exists on i.MX6SX/UL, redefine MMDC1 macro support
   runtime check, but not hardcoding #ifdef macros.
4. Introduce mx6ul-ddr.h, which includes the register address for DRAM
   IO configuration.

Signed-off-by: Peng Fan

mx6_common: Fix LOADADDR and SYS_TEXT_BASE for i.MX6UL

2015-08-02T09:05:08+00:00

DRAM space starts from 0x80000000 for i.MX6UL, so need to
fix LOADADDR, SYS_TEXT_BASE.

Signed-off-by: Peng Fan

mxc: gpio add i.MX6UL support

2015-08-02T09:05:08+00:00

i.MX6UL does not have GPIO6/7, so do not include them for i.MX6UL.

Signed-off-by: Peng Fan

imx: mx6 add PAD_CTL_SPEED_LOW for i.MX6SX/UL

2015-08-02T09:05:08+00:00

PAD_CTL_SPEED_LOW for i.MX6SX/UL is (0 << 6)

Signed-off-by: Ye.Li 
Signed-off-by: Peng Fan