u-boot.git, branch v2016.11-rc1

Prepare v2016.11-rc1

2016-10-03T13:28:13+00:00

Signed-off-by: Tom Rini

Merge git://git.denx.de/u-boot-rockchip

2016-10-03T13:09:29+00:00

ti_armv7_common: Disable Falcon Mode on HS devices

2016-10-02T12:10:03+00:00

Authentication of images in Falcon Mode is not supported. Do not enable
SPL_OS_BOOT when TI_SECURE_DEVICE is enabled. This prevents attempting
to directly load kernel images which will fail, for security reasons,
on HS devices, the board is locked if a non-authenticatable image load
is attempted, so we disable attempting Falcon Mode.

Signed-off-by: Andrew F. Davis 
Reviewed-by: Tom Rini 
Acked-by: Lokesh Vutla

config: Remove usage of CONFIG_STORAGE_EMMC

2016-10-02T12:10:03+00:00

This config option seems to be unused and is probably vestigial.
Remove it.

Signed-off-by: Andrew F. Davis 
Reviewed-by: Tom Rini 
Acked-by: Lokesh Vutla

ti: omap-common: Allow AM33xx devices to be built securely

2016-10-02T12:10:02+00:00

Like OMAP54xx and AM43xx family SoCs, AM33xx based SoCs have high
security enabled models. Allow AM33xx devices to be built with
HS Device Type Support.

Signed-off-by: Andrew F. Davis 
Reviewed-by: Tom Rini 
Acked-by: Lokesh Vutla

board: am33xx-hs: Allow post-processing of FIT image on AM33xx

2016-10-02T12:10:01+00:00

When CONFIG_FIT_IMAGE_POST_PROCESS or CONFIG_SPL_FIT_IMAGE_POST_PROCESS
is enabled board_fit_image_post_process will be called, add this
function to am33xx boards when CONFIG_TI_SECURE_DEVICE is set to
verify the loaded image.

Signed-off-by: Andrew F. Davis 
Reviewed-by: Tom Rini 
Acked-by: Lokesh Vutla

am33xx: config.mk: Fix option used to enable SPI SPL image type

2016-10-02T12:10:00+00:00

The option SPL_SPI_SUPPORT is used to enable support in SPL for loading
images from SPI flash, it should not be used to determine the build type
of the SPL image itself. The ability to read images from SPI flash does
not imply the SPL will be booted from SPI flash.

Unconditionally build SPI flash compatible SPL images.

Signed-off-by: Andrew F. Davis 
Acked-by: Lokesh Vutla 
Reviewed-by: Tom Rini

doc: Update info on using AM33xx secure devices from TI

2016-10-02T12:09:59+00:00

Add a section describing the additional boot types used on AM33xx
secure devices.

Signed-off-by: Andrew F. Davis 
Reviewed-by: Tom Rini 
Acked-by: Lokesh Vutla

am33xx: config.mk: Add support for additional secure boot image types

2016-10-02T12:09:59+00:00

Depending on the boot media, different images are needed
for secure devices. The build generates u-boot*_HS_* files
as appropriate for the different boot modes.

For AM33xx devices additional image types are needed for
various SPL boot modes as the ROM checks for the name of
the boot mode in the file it loads.

Signed-off-by: Andrew F. Davis 
Reviewed-by: Tom Rini 
Acked-by: Lokesh Vutla

Kconfig: Separate AM33XX SOC config from target board config

2016-10-02T12:09:58+00:00

The config option AM33XX is used in several boards and should be
defined as a stand-alone option for this SOC. We break this out
from target boards that use this SoC and common headers then enable
AM33XX on in all the boards that used these targets to eliminate any
functional change with this patch.

This is similar to what has already been done in
9de852642cae ("arm: Kconfig: Add support for AM43xx SoC specific Kconfig")
and is done for the same reasons.

Signed-off-by: Andrew F. Davis 
Acked-by: Lokesh Vutla 
Reviewed-by: Tom Rini