u-boot.git, branch v2017.05-rc3

Prepare v2017.05-rc3

2017-05-01T23:54:41+00:00

Signed-off-by: Tom Rini

odroid-c2: README: MMC is supported

2017-05-01T16:58:35+00:00

Mention eMMC and microSD as supported devices.

They have been enabled with patch
d0c5c8d529f16fa88ab52a3b5dd2d4fc03664f19
odroid-c2: enable new Meson GX MMC driver in board defconfig
which was accepted for u-boot-mmc.git.

Signed-off-by: Heinrich Schuchardt

meson: gxbb: change ramdisk_addr_r

2017-05-01T16:38:17+00:00

0x10000000 is the start of a 2 MiB area used by the
ARM Trusted Firmware (BL31).

See
https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable.git/tree/arch/arm64/boot/dts/amlogic/meson-gx.dtsi?id=refs/tags/v4.10.10

So we should not load the ramdisk here.

The legacy Ubuntu image for the Odroid C2 comes with the
following line in boot.ini:
setenv initrd_loadaddr "0x13000000"

See
http://odroid.in/ubuntu_16.04lts/ubuntu64-16.04-minimal-odroid-c2-20160815.img.xz
http://deb.odroid.in/c2/pool/main/u/u-boot/u-boot_20170226-752a100-8_arm64.deb

So let's use the same address.

With the patch booting Linux with booti succeeds on an Odroid C2,
without the patch Linux hangs.

Cc: Andreas Färber 
Signed-off-by: Heinrich Schuchardt 
Reviewed-by: Simon Glass 
Tested-by: Vagrant Cascadian

meson: gxbb: enable MMC as boot target

2017-05-01T15:49:48+00:00

To enable automatic booting from SD card or eMMC the MMC
devices 0, 1, and 2 are added to the BOOT_TARGET_DEVICES.

Booting from SD card, eMMC, and DHCP are tried in sequence.
A missing or failing device is gracefully handled.

Cc: Andreas Färber 
Signed-off-by: Heinrich Schuchardt 
Tested-by: Vagrant Cascadian 
Reviewed-by: Andreas Färber 
Tested-by: Andreas Färber

configs: Re-sync

2017-05-01T15:44:12+00:00

Signed-off-by: Tom Rini

scripts/config_whitelist.txt: Re-sync

2017-05-01T15:44:03+00:00

Signed-off-by: Tom Rini

warp7: MAINTAINERS: Add warp7_secure_defconfig entry

2017-05-01T13:19:52+00:00

Add warp7_secure_defconfig entry to avoid the following warning:

WARNING: no maintainers for 'warp7_secure'

Signed-off-by: Fabio Estevam

fdt: Move fdt_fixup_ethernet to a common place

2017-05-01T13:11:59+00:00

With 3f66149d9fb4 we no longer have a common call fdt_fixup_ethernet.
This was fine to do on PowerPC as they largely had calls already in
ft_cpu_fixup.  On ARM however we largely relied on this call.  Rather
than introduce a large number of changes to ft_cpu_fixup /
ft_board_fixup we recognize that this is a common enough call that we
should be doing it in a central location.  Do it early enough that we
can do any further updates in ft_cpu_fixup / ft_board_fixup.

Cc: Gerd Hoffmann 
Cc: Chen-Yu Tsai 
Cc: Maxime Ripard 
Cc: Thomas Chou  (maintainer:NIOS)
Cc: York Sun  (maintainer:POWERPC MPC85XX)
Cc: Stefan Roese  (maintainer:POWERPC PPC4XX)
Cc: Simon Glass 
Cc: Joakim Tjernlund 
Fixes: 3f66149d9fb4 ("Remove extra fdt_fixup_ethernet() call")
Signed-off-by: Tom Rini 
Acked-by: Stefan Roese 
Acked-by: York Sun 
Reviewed-by: Simon Glass

cmd: add Kconfig option for 'date' command

2017-05-01T13:04:56+00:00

Signed-off-by: Chris Packham 
[trini: default y if DM_RTC, re-sync]
Signed-off-by: Tom Rini

Drop the pdsp188x driver

2017-04-30T17:41:02+00:00

This is not used in U-Boot.

Signed-off-by: Simon Glass