u-boot.git, branch v2017.11

Prepare v2017.11

2017-11-14T01:08:06+00:00

Signed-off-by: Tom Rini

Revert "console: simplify puts()"

2017-11-12T21:18:16+00:00

This reverts commit c61d0009feb966e0e93254a8c435a1889085e6b8.

A tbs2910 board user reported a very slow console frambuffer as
regression in current u-boot. I could bisect this down to the
above mentioned commit.

This revert brings back the fast framebuffer console (one
cache flush per string in puts(), not after each char).

Reported-by: Uwe Scheffler 
Signed-off-by: Soeren Moch 
Tested-by: Uwe Scheffler 
Reviewed-by: Simon Glass

board: sysam: stmark2: add missing environment location

2017-11-12T21:18:16+00:00

Signed-off-by: Angelo Dureghello

ARM: rmobile: Fix eMMC signal voltage on Salvator-X/XS

2017-11-12T21:17:31+00:00

The eMMC is 1V8 device only and the signaling is always 1V8,
fix the DT for Salvator-X/XS to describe the hardware correctly.

Signed-off-by: Marek Vasut 
Cc: Nobuhiro Iwamatsu

Merge git://git.denx.de/u-boot-sunxi

2017-11-10T15:04:21+00:00

sunxi: SATA link timeout fix

2017-11-10T13:51:24+00:00

After updating u-boot from v2016.01 to 2017.09, issue with
"SATA link 0 timeout." on my Cubietruck board.

mdelay milled after moving satapwr code to board.
"sunxi: Turn satapwr on from board_init"
(sha1: 9fbb0c3aa49f4604b0342cb527a6bd099f92eaeb)

After adding the "mdelay(500);"
line that was lost in the path the error is gone.

Signed-off-by: Werner Böllmann 
[Rebased and updated change and commit message]
Signed-off-by: Jagan Teki 
Reviewed-by: Jagan Teki

net: sun8i_emac: Fix build for non-H3/H5 SoCs

2017-11-10T13:40:33+00:00

Only the H3/H5 SoCs have an internal PHY and its related clock and
reset controls.

Use an #ifdef to guard the internal PHY control code block so it
can be built for other SoCs, such as the A83T or A64.

Signed-off-by: Chen-Yu Tsai 
Acked-by: Maxime Ripard 
Reviewed-by: Joe Hershberger 
Reviewed-by: Jagan Teki

Merge git://git.denx.de/u-boot-rockchip

2017-11-10T13:19:01+00:00

rockchip: configs: vyasa: Update falcon offsets

2017-11-10T13:08:22+00:00

Update the falcon offsets for args to 16MB and kernel to 17MB
Since the below commit updated U-Boot proper location along
with rockchip boot image offsets
"spl: set SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR to 0x4000 for rockchip"
(sha1: 8f4d62b403db45dfa8b1cadb9da9096c79b7df47)

Signed-off-by: Jagan Teki 
Acked-by: Philipp Tomsich 
Reviewed-by: Philipp Tomsich

rockchip: doc: Fix U-Boot proper location for falcon

2017-11-10T13:08:21+00:00

This patch fixed U-Boot proper location has been
missed to update in bewlo commit
"rockchip: doc: update U-Boot location info"
(sha1: 73e6dbe855f357a8330cfd53ff3033303611c1ad)

Signed-off-by: Jagan Teki 
Acked-by: Philipp Tomsich 
Reviewed-by: Philipp Tomsich