u-boot.git, branch v2018.05-rc2 Unnamed repository; edit this file 'description' to name the repository. Prepare v2018.05-rc2 2018-04-17T00:00:14+00:00 Tom Rini trini@konsulko.com 2018-04-17T00:00:14+00:00 8c0a17be0a632b9a823e14628c42f85c3e64f08e Signed-off-by: Tom Rini <trini@konsulko.com> 
Signed-off-by: Tom Rini <trini@konsulko.com>
serial: Remove duplicated line in Makefile 2018-04-16T22:45:35+00:00 Patrice Chotard patrice.chotard@st.com 2018-04-16T08:35:08+00:00 e376040f29b2982159fe715eb821f7f1e8025dfe The line "-obj-$(CONFIG_STM32_SERIAL) += serial_stm32.o" is found twice in Makefile. Fixes: ae74de0dfd45 ("serial: stm32: Rename serial_stm32x7.c to serial_stm32.c" Signed-off-by: Patrice Chotard <patrice.chotard@st.com> Acked-by: Vikas Manocha <vikas.manocha@st.com> Reviewed-by: Simon Glass <sjg@chromium.org> 
The line "-obj-$(CONFIG_STM32_SERIAL) += serial_stm32.o"
is found twice in Makefile.

Fixes: ae74de0dfd45 ("serial: stm32: Rename serial_stm32x7.c to serial_stm32.c"

Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
Acked-by: Vikas Manocha <vikas.manocha@st.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
doc: Update git-mailrc entry for lukma (lukma@denx.de) 2018-04-16T22:45:35+00:00 Lukasz Majewski lukma@denx.de 2018-04-15T19:50:11+00:00 7f4279c0438e19b673d414e48a14f68add11b26f Signed-off-by: Lukasz Majewski <lukma@denx.de> 
Signed-off-by: Lukasz Majewski <lukma@denx.de>
env: mmc/fat/ext4: undefined reference to `mmc_initialize' 2018-04-16T22:45:35+00:00 Heinrich Schuchardt xypron.glpk@gmx.de 2018-04-14T13:41:00+00:00 95058fbb97b8846e5fa569d5083a76567f2b9d81 For CONFIG_ENV_FAT_INTERFACE != 'mmc' a link error env/fat.c:93: undefined reference to `mmc_initialize' occurs if CONFIG_MMC_SUPPORT is not enabled. Fixes: 26862b4a40c3 ("env: mmc/fat/ext4: make sure that the MMC sub-system is initialized before using it") Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> 
For CONFIG_ENV_FAT_INTERFACE != 'mmc' a link error
env/fat.c:93: undefined reference to `mmc_initialize'
occurs if CONFIG_MMC_SUPPORT is not enabled.

Fixes: 26862b4a40c3 ("env: mmc/fat/ext4: make sure that the MMC sub-system
is initialized before using it")
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
env: Relocate env drivers if manual reloc is required 2018-04-16T22:45:35+00:00 Siva Durga Prasad Paladugu siva.durga.paladugu@xilinx.com 2018-04-13T05:57:21+00:00 7bcdf19572c8f64552233d04b309903b297d5b63 Relocate env drivers if manual relocation is enabled. This patch fixes the issue of u-boot hang incase if env is present in any of the flash devices. Signed-off-by: Siva Durga Prasad Paladugu <sivadur@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Simon Glass <sjg@chromium.org> 
Relocate env drivers if manual relocation is enabled. This
patch fixes the issue of u-boot hang incase if env is
present in any of the flash devices.

Signed-off-by: Siva Durga Prasad Paladugu <sivadur@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Kconfig: Enlarge default SYS_MALLOC_F_LEN for AM33XX 2018-04-16T22:45:35+00:00 Sjoerd Simons sjoerd.simons@collabora.co.uk 2018-04-12T16:09:58+00:00 90e407ae01838692bacfbcbcb83d0fb33f3ba7e7 Since commit 8e14ba7bd524 ("gpio: omap_gpio: Add DM_FLAG_PRE_RELOC flag") omap GPIO gets bound before relocation. Unfortunately due to this, on at least the beaglebone black, the pre-relocation memory pool gets exhausted before probing the serial port. This then causes u-boot to panic as CONFIG_REQUIRE_SERIAL_CONSOLE is set... Resolve this by resizing the default size of the pre-relocation malloc pool for AM335X platforms. Signed-off-by: Sjoerd Simons <sjoerd.simons@collabora.co.uk> 
Since commit 8e14ba7bd524 ("gpio: omap_gpio: Add DM_FLAG_PRE_RELOC
flag") omap GPIO gets bound before relocation.  Unfortunately due to
this, on at least the beaglebone black, the pre-relocation memory pool
gets exhausted before probing the serial port. This then causes u-boot
to panic as CONFIG_REQUIRE_SERIAL_CONSOLE is set...

Resolve this by resizing the default size of the pre-relocation malloc
pool for AM335X platforms.

Signed-off-by: Sjoerd Simons <sjoerd.simons@collabora.co.uk>
part: Disable CONFIG_SPL_ISO_PARTITION by default 2018-04-16T22:45:35+00:00 Alexander Graf agraf@suse.de 2018-04-12T07:58:44+00:00 4f67b93fb7f558dbdd5f7a3e763ec19b6ec62460 We enabled CONFIG_ISO_PARTITION by default for distro boot, so that U-Boot could load distro images that usually get shipped as iso images. These images usually come with a board agnostic boot environment. However, there is very little point in having ISO support enabled (for anyone really) in SPL, as the whole idea of SPL is to load U-Boot proper which again is board specific. So the fact that we enable ISO support in U-Boot proper does not mean at all that we want ISO support in U-Boot SPL. Hence, let's remove the Kconfig dependency. Along the way, let's also clean up all those default configs that disabled SPL ISO support. Signed-off-by: Alexander Graf <agraf@suse.de> 
We enabled CONFIG_ISO_PARTITION by default for distro boot, so that U-Boot
could load distro images that usually get shipped as iso images. These images
usually come with a board agnostic boot environment.

However, there is very little point in having ISO support enabled (for anyone
really) in SPL, as the whole idea of SPL is to load U-Boot proper which again
is board specific. So the fact that we enable ISO support in U-Boot proper does
not mean at all that we want ISO support in U-Boot SPL.

Hence, let's remove the Kconfig dependency. Along the way, let's also clean up
all those default configs that disabled SPL ISO support.

Signed-off-by: Alexander Graf <agraf@suse.de>
Merge git://git.denx.de/u-boot-x86 2018-04-16T17:24:20+00:00 Tom Rini trini@konsulko.com 2018-04-16T17:24:20+00:00 9d24b01ce0e938b49270386467e3edd4476e9108 






x86: Rename coreboot-x86 to coreboot
2018-04-16T14:38:53+00:00

Simon Glass
sjg@chromium.org

2018-04-12T20:04:40+00:00

d5032392babd3a8bd027ccb79072ee7b05299b67

We only use coreboot as a target on x86 platforms, since on ARM platforms
U-Boot always runs as the primary boot loader. Rename the coreboot-x86
platform to reflect this.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>





We only use coreboot as a target on x86 platforms, since on ARM platforms
U-Boot always runs as the primary boot loader. Rename the coreboot-x86
platform to reflect this.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>







doc: vxworks: Update x86 specific instructions
2018-04-16T14:38:53+00:00

Bin Meng
bmeng.cn@gmail.com

2018-04-12T05:02:23+00:00

7d9974a2bee01b133ec18f794467be74bc4d0587

This updates the doc of booting VxWorks, like loading an x64 kernel,
and how to make VxWorks graphics console driver work.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>





This updates the doc of booting VxWorks, like loading an x64 kernel,
and how to make VxWorks graphics console driver work.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>