u-boot.git, branch v2023.01

Prepare v2023.01

2023-01-09T16:07:33+00:00

Signed-off-by: Tom Rini

board: rockchip: Fix binman_init failure on EVB-RK3568

2023-01-09T13:29:15+00:00

For some newer SoCs like RK3568, the Rockchip has not released
any DDR drivers yet so idbloader needs to create manually using
DDR binaries offered by rkbin. This indeed no requirement to
enable TPL in the U-Boot source code.

If we mark TPL disabled and mark BINMAN enabled by default then
there would be an issue of binman_init failure during board
relocation. This is true as binman failed to find the top-level
node like u-boot-tpl here.

Here is the boot issue observed in Radxa-CM3 RK3566 board,

 U-Boot 2023.01-rc4-00057-gac2505d463-dirty (Jan 04 2023 - 23:44:18 +0530)

 Model: Radxa Compute Module 3(CM3) IO Board
 DRAM:  2 GiB
 binman_init failed:-2
 initcall sequence 000000007ffd2008 failed at call 0000000000a18cac (err=-2)
 ### ERROR ### Please RESET the board ###

This might be fixed via binman node in rockchip-u-boot.dtsi however
disable BINMAN_FDT for evb-rk3568 defconfig for now as we are at the
end of the release cycle.

Fixes: 05713d570762 ("rockchip: generate u-boot-rockchip.bin with binman
for ARM64 boards")
Cc: Quentin Schulz 
Signed-off-by: Jagan Teki 
Reviewed-by: Kever Yang

distro_bootcmd: Fix copy-paste error

2023-01-08T13:45:17+00:00

The "SCRIPT FAILED" string is copied from scan_dev_for_scripts script,
update it so it prints "EXTLINUX FAILED" instead in scan_dev_for_extlinux
script.

Signed-off-by: Marek Vasut

pylibfdt: Allow version normalization to fail

2023-01-07T23:02:26+00:00

In some cases, we might not have the sic portion of setuputils
available. Make our import and use of this be done in try/except blocks
as this is done to suppress a run-time warning that is otherwise
non-fatal.

Reported-by: Pali Rohár 
Fixes: 141659187667 ("pylibfdt: Fix disable version normalization")
Signed-off-by: Tom Rini

common/memsize.c: Check for overflow in get_effective_memsize() only for mpc85xx

2023-01-07T23:01:53+00:00

This reverts commit 777aaaa706bc ("common/memsize.c: Fix
get_effective_memsize() to check for overflow") for non-mpc85xx platforms.

The changes to this generic function, which is intended to help with
32bit platforms with large amounts of memory has unintended side effects
(which in turn lead to boot failures) on other platforms which were
previously functional.

For now do overflow check only for powerpc mpc85xx platform. It is needed
to prevent crashing of P1/P2 boards with 4GB DDR module in 32-bit mode.

Fixes: 777aaaa706bc ("common/memsize.c: Fix get_effective_memsize() to check for overflow")
Signed-off-by: Pali Rohár

Merge tag 'efi-2023-01-rc5-4' of https://source.denx.de/u-boot/custodians/u-boot-efi

2023-01-07T17:32:42+00:00

Pull request efi-2023-01-rc5-4

UEFI:

* correct the vexpress loaddr which collides with memory used by EFI
* consider the EFI memory map for LMB memory reservation
* avoid RWX section warnings for .data section of *_efi.so files

efi_loader: make .data section of *_efi.so files RW

2023-01-06T21:27:30+00:00

When building with binutils 2.39 warnings

    *_efi.so has a LOAD segment with RWX permissions

occur.

Use SHF_WRITE | SHF_ALLOC as section flags for the .data section.

Signed-off-by: Heinrich Schuchardt 
Reviewed-by: Ilias Apalodimas

lmb: consider EFI memory map

2023-01-06T21:27:30+00:00

Add reservations for all EFI memory areas that are not
EFI_CONVENTIONAL_MEMORY.

Signed-off-by: Heinrich Schuchardt

efi_loader: carve out efi_get_memory_map_alloc()

2023-01-06T21:27:30+00:00

Carve out code from efidebug command used to read the memory map.

Signed-off-by: Heinrich Schuchardt

vexpress: adjust loadaddr

2023-01-06T21:27:30+00:00

On the vexpress_ca9x4 $loadaddr points to a memory area used by the EFI
sub-system. Use the same value as $kernel_addr_r which is safe.

Signed-off-by: Heinrich Schuchardt