Signed-off-by: Tom Rini <trini@konsulko.com>

- Only call binman when TPL available;
- rk3128 DTS fix;
- Fix GPT table corruption for rk3399 puma ;
- Fix i2c for rk3399 Pinebookpro;
- Enable UEFI capsule update for RockPi4;

Enable the UEFI capsule update functionality on the RockPi4B and
RockPi4C boards. Support is being enabled for updating the idbloader
and u-boot firmware images residing on GPT partitioned uSD card
storage device.

Signed-off-by: Sughosh Ganu <sughosh.ganu@linaro.org>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>

Add information that will be needed for enabling the UEFI capsule
update feature on the RockPi4 boards. With the feature enabled, it
would be possible to update the idbloader and u-boot.itb images on the
RockPi4B and RockPi4C variants.

Signed-off-by: Sughosh Ganu <sughosh.ganu@linaro.org>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>

Add functions needed to support the UEFI capsule update feature on
rockchip boards. Currently, the feature is being enabled on the
RockPi4 boards with firmware images residing on GPT partitioned
storage media.

Signed-off-by: Sughosh Ganu <sughosh.ganu@linaro.org>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>

If a clock doesn't supply the enable hook, clk_enable() will return
-ENOSYS.  In this case the clock is always enabled so there is no error
and the phy initialisation should continue.

Signed-off-by: John Keeping <john@metanate.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>

The i2c locks up when initialized before relocation, and it stays broken
in Linux as well breaking the ability to boot Linux.

The i2c bus and pmic was not actually used in pre-reloc before
commit ad607512f575 ("power: pmic: rk8xx: Support sysreset shutdown method")

The cause is not known.

This is board-specific, other boards that do not add the option to
include the i2c bus in pre-reloc DT are not affected.

Signed-off-by: Michal Suchanek <msuchanek@suse.de>
Reviewed-by: Peter Robinson <pbrobinson@gmail.com>
Tested-by: Peter Robinson <pbrobinson@gmail.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>

The GPT table is taking the first 34 sectors, which amounts to 0x4400
bytes. Saving the environment below this address in storage will corrupt
the GPT table.

While technically the table ends at 0x4400, some tools (e.g. bmaptool)
are rounding everything to the logical block size (0x1000), so it is
safer to make it point to 0x5000 so that the environment could still
persist when flashing a sparse image with bmaptool or similar tools.

Obviously, the default 0x4000 environment size does not work anymore, so
let's set it to 0x3000 so it does fill the gap between the GPT table
(rounded to 0x1000) and the start of the idbloader.img.

Fixes: 56f580d3eb8d ("rockchip: dts: rk3399-puma: put environment (in MMC/SD configurations) before SPL")
Cc: Quentin Schulz <foss+uboot@0leil.net>
Signed-off-by: Quentin Schulz <quentin.schulz@theobroma-systems.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>

this patch add USB mass storage function and Rockusb function for
Radxa ROCK Pi 4 series.

Signed-off-by: FUKAUMI Naoki <naoki@radxa.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>

This patch enables the following:

1) use preboot configuration to enable usb devices.

2) Enable USB configs so keyboards and other USB devices work,
   update the number of ports of the usb root hub.

   - with this addition the updated USB device Tree:

	1  Hub (12 Mb/s, 0mA)
	U-Boot Root Hub
	1  Hub (12 Mb/s, 0mA)
	|   U-Boot Root Hub
	|
	+-2  Hub (12 Mb/s, 100mA)
	USB 2.0 Hub [MTT]

	1  Hub (5 Gb/s, 0mA)
	U-Boot XHCI Host Controller

3) enable crypto RNG support.

4) Change SPI speed and frequency:
    - increase the maximum SPI slave device speed,
      SPI flash max frequency for the environment from 10Mhz to 30MHz.

    - performance stats for speed update from 10MHz to 30MHz:

    	with 10Mhz speed update:
    	 => sf update 0x300000 0x800000 0x400000
    	    4194304 bytes written, 0 bytes skipped in 36.819s, speed 119837 B/s

        with 30Mhz speed update:
    	 => sf update 0x300000 0x800000 0x400000
    	    4194304 bytes written, 0 bytes skipped in 20.319s, speed 220752 B/s

Signed-off-by: Manoj Sai <abbaraju.manojsai@amarulasolutions.com>
Signed-off-by: Da Xue <da.xue@libretech.co>
Signed-off-by: dsx724 <da@lessconfused.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>