u-boot.git, branch v2023.04

Prepare v2023.04

2023-04-03T20:38:50+00:00

Signed-off-by: Tom Rini

arm: dts: k3-j721e-sk-u-boot: fix boot on j721e SK

2023-04-03T18:54:16+00:00

J721e SK has been broken since at least March 2022.

The main-navss and mcu-navss nodes were renamed and this caused the
A72 SPL to fail early in the boot even before the serial port was
enabled. Fix this.

A later patch series between v2022.07 and v2022.10 additionally broke
boot on this board by introducing hbmc nodes which are not present on
this board. The right fix is to disable these by default in the SOC
dtsi file, but for now we can also disable them in the u-boot dtsi.

With both these fixed, we can now boot the j721e SK board fully from
mainline u-boot.

Fixes: 58d61fb5a77ef ("arm: dts: k3-j721e-sk: Add initial A72 specific dts support")
Fixes: 297daac43afb9 ("arm: dts: k3-j721e-mcu-wakeup: Add HyperBus Controller node")
Reported-by: Anand Gadiyar 
Signed-off-by: Sinthu Raja 
[gadiyar@ti.com: update commit description]
Signed-off-by: Anand Gadiyar 
Cc: Bryan Brattlof

pico-imx6: Pass the mmc alias to fix boot regression

2023-04-03T14:14:34+00:00

Originally, the mmc aliases node was present in imx6qdl-pico.dtsi.

After the sync with Linux in commit d0399a46e7cd ("imx6dl/imx6qdl:
synchronise device trees with linux"), the aliases node is gone as
the upstream version does not have it.

This causes a boot regression in which the eMMC card cannot be found anymore.

Fix it by passing the alias node in the u-boot.dtsi file to
restore the original behaviour where the eMMC (esdhc3) was
mapped to mmc0.

Fixes: d0399a46e7cd ("imx6dl/imx6qdl: synchronise device trees with linux")
Signed-off-by: Fabio Estevam

Merge tag 'u-boot-imx-20230403' of https://source.denx.de/u-boot/custodians/u-boot-imx

2023-04-03T14:13:36+00:00

Fixes for 2023.04
------------------

CI: https://source.denx.de/u-boot/custodians/u-boot-imx/-/pipelines/15831

- fix for imx8mn_bsh_smm_s2

rockchip: Fix incorrect constant name in RAM init code

2023-04-02T16:57:12+00:00

A condition in the rk3399 RAM initialization code used the old
CONFIG_RAM_RK3399_LPDDR4 constant name. This commit changes the
condition to use the correct CONFIG_RAM_ROCKCHIP_LPDDR4 constant.

Reviewed-by: Simon Glass

Merge tag 'efi-2023-04-rc6' of https://source.denx.de/u-boot/custodians/u-boot-efi

2023-04-01T14:55:06+00:00

Pull request for efi-2023-04-rc6

Documentation:

* describe skipping triggering a pipeline in Gitlab

UEFI:

* correct shortening of device-paths for boot options

efi_loader: remove duplicate assignment

2023-04-01T08:11:50+00:00

Assigning the value of a variable to itself should be avoided.

Addresses-Coverity-ID: 451089 ("Evaluation order violation")
Fixes: 180b7118bed8 ("efi_loader: fix device-path for USB devices")
Signed-off-by: Heinrich Schuchardt

efi_loader: correct shortening of device-paths

2023-04-01T08:11:50+00:00

We use short device-paths in boot options so that a file on a block device
can be found independent of the port into which the device is plugged.

Usb() device-path nodes only contain port and interface information and
therefore cannot identify a block device.
UsbWwi() device-path nodes contain the serial number of USB devices.

Signed-off-by: Heinrich Schuchardt

doc: describe skipping triggering a pipeline in Gitlab

2023-04-01T08:11:50+00:00

'git push -o ci.skip' can be used to push to Gitlab without triggering a
pipeline.

Signed-off-by: Heinrich Schuchardt 
Reviewed-by: Simon Glass

scsi: typo supporedt

2023-04-01T08:11:50+00:00

%s/supporedt/supported/

Fixes: edca8cf72130 ("Convert CONFIG_SCSI_AHCI_PLAT et al to Kconfig")
Signed-off-by: Heinrich Schuchardt 
Reviewed-by: Simon Glass