u-boot.git, branch v2023.04-rc2 Unnamed repository; edit this file 'description' to name the repository. Prepare v2023.04-rc2 2023-02-13T23:39:15+00:00 Tom Rini trini@konsulko.com 2023-02-13T23:39:15+00:00 faac9dee8e0629326dc122f4624fc4897e3f38b0 Signed-off-by: Tom Rini <trini@konsulko.com> 
Signed-off-by: Tom Rini <trini@konsulko.com>
clocks: qcs404: Add support for I2C clocks 2023-02-13T15:01:52+00:00 Sumit Garg sumit.garg@linaro.org 2023-02-13T04:49:09+00:00 b97487db4e8cda27baa64ab5d07900d0d27728f6 Co-developed-by: Mike Worsfold <mworsfold@impinj.com> Signed-off-by: Mike Worsfold <mworsfold@impinj.com> Signed-off-by: Sumit Garg <sumit.garg@linaro.org> 
Co-developed-by: Mike Worsfold <mworsfold@impinj.com>
Signed-off-by: Mike Worsfold <mworsfold@impinj.com>
Signed-off-by: Sumit Garg <sumit.garg@linaro.org>
Merge tag 'i2c-updates-for-v2023.04' of https://source.denx.de/u-boot/custodians/u-boot-i2c 2023-02-13T14:57:35+00:00 Tom Rini trini@konsulko.com 2023-02-13T14:57:35+00:00 d7bcd6ee409ae9c69dcc7b66462a4c86c165e6a9 i2c updates for v2023.04 - add new i2c driver ast2600 from Ryan Chen - i2c-cdns: make read fifo-depth configurable through device tree from Pei Yue Ho - mxc i2c driver: print base address in hex, not in decimal from Fabio 
i2c updates for v2023.04

- add new i2c driver ast2600 from Ryan Chen

- i2c-cdns: make read fifo-depth configurable through device tree
  from Pei Yue Ho

- mxc i2c driver: print base address in hex, not in decimal
  from Fabio
Merge https://source.denx.de/u-boot/custodians/u-boot-marvell 2023-02-13T14:39:15+00:00 Tom Rini trini@konsulko.com 2023-02-13T14:39:15+00:00 be9399b399f39c2cae49062ff2dacd1d05bb89c8 - mvebu: Support for 2 new Armada 385 boards (Tony) - mvebu: Minor misc board enhancements (Tony) - kirkwood: Serial driver fixes (Kconfig & dtsi) (Tony) - cmd: return code when tlv_eeprom incorrectly called (Heinrich) 
- mvebu: Support for 2 new Armada 385 boards (Tony)
- mvebu: Minor misc board enhancements (Tony)
- kirkwood: Serial driver fixes (Kconfig & dtsi) (Tony)
- cmd: return code when tlv_eeprom incorrectly called (Heinrich)
arm: kirkwood: Enable uart0 dm-pre-reloc for Pogoplug V4 board 2023-02-13T09:15:04+00:00 Tony Dinh mibodhi@gmail.com 2023-02-10T21:08:17+00:00 dd15284b749e41a3db94883bde9b96601491ec10 When DM_SERIAL is enabled, the device-tree tag u-boot,dm-pre-reloc is required for this board to boot over UART with kwboot. Enable this in kirkwood-pogoplug-series-4-u-boot.dtsi. Added by Stefan while applying: Please note that it's not fully understood, why this property really is needed. Here a link to the discussion about this: https://lore.kernel.org/r/20230201080210.ypz4nrj4y2igwxz3@pali/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de> 
When DM_SERIAL is enabled, the device-tree tag u-boot,dm-pre-reloc is
required for this board to boot over UART with kwboot. Enable this in
kirkwood-pogoplug-series-4-u-boot.dtsi.

Added by Stefan while applying:
Please note that it's not fully understood, why this property really
is needed. Here a link to the discussion about this:

https://lore.kernel.org/r/20230201080210.ypz4nrj4y2igwxz3@pali/

Signed-off-by: Tony Dinh <mibodhi@gmail.com>
Reviewed-by: Stefan Roese <sr@denx.de>
arm: mvebu: Add support for Synology DS116 (Armada 385) 2023-02-13T09:14:50+00:00 Tony Dinh mibodhi@gmail.com 2023-02-09T22:00:03+00:00 b21f87a5a5e23a833c13f26819a04d80e0802600 Synology DS116 is a NAS based on Marvell Armada 385 SoC. Board Specification: - Marvel MV88F6820 Dual Core at 1.8GHz - 1 GiB DDR3 RAM - 8MB Macronix mx25l6405d SPI flash - I2C - 2x USB 3.0 - 1x GBE LAN port (PHY: Marvell 88E1510) - 1x SATA (6 Gbps) - 3x LED - PIC16F1829 (connected to uart1) - GPIO fan - serial console Note that this patch depends on the add-support for Thecus N2350 patch: https://patchwork.ozlabs.org/project/uboot/patch/20230201231306.7010-1-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> 
Synology DS116 is a NAS based on Marvell Armada 385 SoC.

Board Specification:

- Marvel MV88F6820 Dual Core at 1.8GHz
- 1 GiB DDR3 RAM
- 8MB Macronix mx25l6405d SPI flash
- I2C
- 2x USB 3.0
- 1x GBE LAN port (PHY: Marvell 88E1510)
- 1x SATA (6 Gbps)
- 3x LED
- PIC16F1829 (connected to uart1)
- GPIO fan
- serial console

Note that this patch depends on the add-support for Thecus N2350 patch:
https://patchwork.ozlabs.org/project/uboot/patch/20230201231306.7010-1-mibodhi@gmail.com/

Signed-off-by: Tony Dinh <mibodhi@gmail.com>
arm: mvebu: Power up 2nd SATA port for Thecus N2350 2023-02-13T09:14:50+00:00 Tony Dinh mibodhi@gmail.com 2023-02-07T01:00:11+00:00 384e2d396c378063749849739e6b528be59c4071 Currently, only the 1st SATA port is powered up (by GPIO1 12). Add GPIO1 13 in board initialization to power up the 2nd SATA port. Note that this patch depends on the initial add-support patch: https://patchwork.ozlabs.org/project/uboot/patch/20230201231306.7010-1-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de> 
Currently, only the 1st SATA port is powered up (by GPIO1 12).
Add GPIO1 13 in board initialization to power up the 2nd SATA port.

Note that this patch depends on the initial add-support patch:
https://patchwork.ozlabs.org/project/uboot/patch/20230201231306.7010-1-mibodhi@gmail.com/

Signed-off-by: Tony Dinh <mibodhi@gmail.com>
Reviewed-by: Stefan Roese <sr@denx.de>
arm: kirkwood: sheevaplug: reduce u-boot image size 2023-02-13T09:14:50+00:00 Tony Dinh mibodhi@gmail.com 2023-02-02T22:16:53+00:00 0ca42c18a86dcf423e079f0d4a163c5d1c190beb Sheevaplug board has 512K CONFIG_BOARD_SIZE_LIMIT. Recently, DM_SERIAL has pushed the image size a few hundred bytes over that limit. So explicitly deselect some configs that are unrelated to this board (and gain back a bit over 2K). Signed-off-by: Tony Dinh <mibodhi@gmail.com> 
Sheevaplug board has 512K CONFIG_BOARD_SIZE_LIMIT. Recently, DM_SERIAL has
pushed the image size a few hundred bytes over that limit. So explicitly
deselect some configs that are unrelated to this board
(and gain back a bit over 2K).

Signed-off-by: Tony Dinh <mibodhi@gmail.com>
arm: mvebu: Add support for Thecus N2350 (Armada 385) board 2023-02-13T09:14:50+00:00 Tony Dinh mibodhi@gmail.com 2023-02-01T23:13:05+00:00 3fdd09f90f829e8f4e576c65772e9c80d8930d7d Thecus N2350 is a NAS based on Marvell Armada 385 SoC. Specification: - Processor: Marvel MV88F6820 Dual Core at 1GHz - 1 GiB DDR4 RAM - 4MB Macronix mx25l3205d SPI flash - 512MB Hynix H27U4G8F2DTR-BC NAND flash - I2C - 2x USB 3.0 - 1x GBE LAN port (PHY: Marvell 88E1510) - 2x SATA (hot swap slots) - 3x buttons - 10x LEDS - serial console Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de> 
Thecus N2350 is a NAS based on Marvell Armada 385 SoC.

Specification:

- Processor: Marvel MV88F6820 Dual Core at 1GHz
- 1 GiB DDR4 RAM
- 4MB Macronix mx25l3205d SPI flash
- 512MB Hynix H27U4G8F2DTR-BC NAND flash
- I2C
- 2x USB 3.0
- 1x GBE LAN port (PHY: Marvell 88E1510)
- 2x SATA (hot swap slots)
- 3x buttons
- 10x LEDS
- serial console

Signed-off-by: Tony Dinh <mibodhi@gmail.com>
Reviewed-by: Stefan Roese <sr@denx.de>
arm: kirkwood: Use CONFIG_SYS_NS16550 with DM_SERIAL for Kirkwood boards 2023-02-13T09:14:50+00:00 Tony Dinh mibodhi@gmail.com 2023-01-31T22:06:54+00:00 5c73428f4a6a3f57a255e04a43f40b0db4226046 CONFIG_SYS_NS16550 is required when DM_SERIAL is enabled for Kirkwood boards. Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Tom Rini <trini@konsulko.com> Reviewed-by: Stefan Roese <sr@denx.de> 
CONFIG_SYS_NS16550 is required when DM_SERIAL is enabled for
Kirkwood boards.

Signed-off-by: Tony Dinh <mibodhi@gmail.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Stefan Roese <sr@denx.de>