Signed-off-by: Tom Rini <trini@konsulko.com>

Resync all defconfig files using qconfig.py

Signed-off-by: Tom Rini <trini@konsulko.com>

In case an rswitch port is described as disabled in DT, do not
register it as ethernet device in U-Boot. This way, such ports
cannot be accessed from U-Boot command line.

Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>

Move CONFIG_ENV_OVERWRITE=y into commont renesas_rcar.config to make sure
this configuration option is consistently enabled on all of Renesas R-Car
Gen2, Gen3, Gen4. Currently this option is not enabled on Gen4, this fix
corrects that omission.

Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>

- Two rswitch fixes and a clock fix

TFTP transfers of large files, for example 128 MiB, can sporadically
get stuck and the transfer slows down considerably.

This happens because the TX DMA descriptor in DRAM becomes out of sync
with the view of the TX DMA descriptor content from the CPU side, which
is viewed through the CPU caches. In order to guarantee these two views
are consistent, the cache over TX DMA descriptor that has possibly been
written by the rswitch hardware must first be invalidated, only then can
the descriptor be cleared and updated by the CPU, and finally the cache
over that area must be flushed back into DRAM to make sure the rswitch
hardware has consistent view of the updated descriptor content.

The very first invalidation operation was missing, which led to sporadic
corruption of the TX DMA descriptor. Fix it, add the missing invalidation
operation.

Reported-by: Enric Balletbo i Serra <eballetb@redhat.com>
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Tested-by: Enric Balletbo i Serra <eballetb@redhat.com>

TFTP transfer size can be used to re-size the TFTP progress bar on
single line based on the server reported file size. Enable it by
default for Renesas hardware to avoid long scrolling walls of '#'
character during long TFTP transfers.

Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>

Early revisions of the R-Car V4M Series Hardware User’s Manual
contained an incorrect formula for the CPU core clocks:

    ZCnφ = (PLL2VCO x 1/2) x mult/32

Dang-san fixed this by using CLK_PLL2_DIV2 instead of CLK_PLL2 as the
parent clock.

In Rev.0.70 of the documentation, the formula was corrected to:

    ZCnφ = (PLL2VCO x 1/4) x mult/32

As the CPG Block Diagram now shows a separate 1/4 post-divider for PLL2,
the use of CLK_PLL2_DIV2 is a recurring source of confusion.  Hence get
rid of CLK_PLL2_DIV2, and include the proper 1/4 post-divider in the
invocation of the DEF_GEN4_Z() macro, like is done on other R-Car Gen4
(and Gen3) SoCs.

Ported from Linux commit
92850bed9d4d ("clk: renesas: r8a779h0: Drop CLK_PLL2_DIV2 to clarify ZCn clocks")

Reported-by: Vinh Nguyen <vinh.nguyen.xz@renesas.com>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/0d2789cac2bf306145fe0bbf269c2da5942bb68f.1728377724.git.geert+renesas@glider.be
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>

AMD/Xilinx changes for v2025.01-rc5 - second

- Fix find_ram_top() return to support configs > 4GB