u-boot.git/CREDITS, branch v2011.06

barco: drop unsupported board configuration

2010-11-26T21:08:18Z

The barco board appears to be unmaintained since it was added about 5 years ago. The environment location has probably never been correct. Drop it. Signed-off-by: Wolfgang Denk Cc: Marc Leeman Acked-by: Stefan Roese

ERIC: drop unsupported board configuration

2010-11-26T21:08:17Z

The ERIC board appears to be unmaintained for more than 9 years. The environment location has probably never been correct, and has been definitely broken since for at least a year. Drop it. Signed-off-by: Wolfgang Denk Cc: Stefan Roese Cc: Swen Anderson Acked-by: Stefan Roese

logodl: remove code for yet another corpse

2010-10-18T19:48:26Z

The logodl board has long been unmaintained and left broken. As obviously nobody is interestedin that code any more, we may as well remove it. Signed-off-by: Wolfgang Denk Cc: August Hoeraendl Cc: Robert Schwebel Cc: Marek Vasut

Add initial support for Matrix Vision mvSMR board based on MPC5200B.

2010-04-09T22:06:05Z

Signed-off-by: Andre Schwarz

Adding EP2500 MCF5282 board [PATCH]

2010-03-24T16:08:48Z

Mercury-EP2500.patch - added Mercury's EP2500 board uses the mcf5282 processor CREDITS.patch Signed-off-by: David Wu Signed-off-by: Michael Durrant

Fix e-mail address of Gary Jennejohn.

2009-05-15T20:11:59Z

Signed-off-by: Detlev Zundel

ppc4xx: Generic architecture for xilinx ppc405(v3)

2008-10-24T15:26:09Z

As "ppc44x: Unification of virtex5 pp440 boards" did for the xilinx ppc440 boards, this patch presents a common architecture for all the xilinx ppc405 boards. Any custom xilinx ppc405 board can be added very easily with no code duplicity. This patch also adds a simple generic board, that can be used on almost any design with xilinx ppc405 replacing the file ppc405-generic/xparameters.h This patch is prepared to work with the latest version of EDK (10.1) Signed-off-by: Ricardo Ribalda Delgado Signed-off-by: Stefan Roese

ppc44x: Unification of virtex5 pp440 boards

2008-09-05T09:51:22Z

This patch provides an unificated way of handling xilinx v5 ppc440 boards. It unificates 3 different things: 1) Source code A new board called ppc440-generic has been created. This board includes a generic tlb initialization (Maps the whole memory into virtual) and defines board_pre_init, checkboard, initdram and get_sys_info weakly, so, they can be replaced by specific functions. If a new board needs to redefine any of the previous functions (specific initialization) it can create a new directory with the specific initializations needed. (see the example ml507 board). 2) Configuration file Common configurations are located under configs/xilinx-ppc440.h, this header file interpretes the xparameters file generated by EDK and configurates u-boot in correspondence. Example: if there is a Temac, allows CMD_CONFIG_NET Specific configuration are located under specific configuration file. (see the example ml507 board) 3) Makefile Some work has been done in order to not duplicate work in the Main Makefile. Please see the attached code. In order to support new boards they can be implemented in the next way: a) Simple Generic Board (90% of the time) Using EDK generates a new xparameters.h file, replace ppc440-generic/xparameters.h and run make xilinx-ppc440-generic_config && make b) Simple Boards with special u-boot parameters (9 % of the time) Create a new file under configs for it (use ml507.h as example) and change your paramaters. Create a new Makefile paragraph and compile c) Complex boards (1% of the time) Create a new folder for the board, like the ml507 Finally, it adds support for the Avnet FX30T Evaluation board, following the new generic structure: Cheap board by Avnet for evaluating the Virtex5 FX technology. This patch adds support for: - UartLite - 16MB Flash - 64MB RAM Prior using U-boot in this board, read carefully the ERRATA by Avnet to solve some memory initialization issues. Signed-off-by: Ricardo Ribalda Delgado Signed-off-by: Stefan Roese

Merge branch 'next' of git://git.denx.de/u-boot-avr32

2008-08-20T07:37:09Z

Conflicts: MAINTAINERS

avr32: Add MIMC200 board

2008-08-20T07:10:31Z

The MIMC200 board is based on Atmel's NGW100 dev kit, but with an extra 8MByte FLASH and 128KByte FRAM. Signed-off-by: Mark Jackson Signed-off-by: Haavard Skinnemoen