u-boot.git/Kconfig, branch v2017.09

Kconfig: Migrate all of cmd/fastboot/Kconfig to defconfigs

2017-09-01T20:18:21+00:00

- Move ANDROID_IMAGE_SUPPORT to top level Kconfig under images as it's
  not strictly part of fastboot.
- Add some defaults for the fastboot buffer location and size
- Migrate all options listed in cmd/fastboot/Kconfig
- Cleanup the README

Signed-off-by: Tom Rini

Move environment files from common/ to env/

2017-08-15T12:18:45+00:00

About a quarter of the files in common/ relate to the environment. It
seems better to put these into their own subdirectory and remove the
prefix.

Signed-off-by: Simon Glass 
Reviewed-by: Tom Rini

spl: use TPL_SYS_MALLOC_F_LEN for TPL

2017-08-13T15:12:19+00:00

The (upstream) changes to break up SYS_MALLOC_F_LEN for the full
U-Boot and the SPL stage, break TPL (if simple malloc is enabled in
TPL).

This adds support for a TPL-variant of SYS_MALLOC_F_LEN:
- adds TPL_SYS_MALLOC_F_LEN
- rewrites a test for CONFIG_SPL_SYS_MALLOC_F_LEN to access
  CONFIG_VAL(SYS_MALLOC_F_LEN)

Signed-off-by: Philipp Tomsich 
Reviewed-by: Simon Glass

Convert ARCH_OMAP2PLUS boards' CONFIG_SYS_TEXT_BASE to Kconfig

2017-08-05T00:38:39+00:00

This converts the following to Kconfig:
   CONFIG_SYS_TEXT_BASE

The includes, whitelist, etc. were left for now but I don't get any
build errors or warnings on the omap3_logic_defconfig or
am3517_evm_defconfig builds I tried.

Signed-off-by: Adam Ford

spl: make SPL and normal u-boot stage use independent SYS_MALLOC_F_LEN

2017-07-27T12:59:03+00:00

Some platforms have very limited SRAM to run SPL code, so there may
not be the same amount space for a malloc pool before relocation in
the SPL stage as the normal U-Boot stage.

Make SPL and (the full) U-Boot stage use independent SYS_MALLOC_F_LEN,
so the size of pre-relocation malloc pool can be configured memory
space independently.

Signed-off-by: Andy Yan 
Reviewed-by: Tom Rini 
Acked-by: Philipp Tomsich 
Reviewed-by: Philipp Tomsich 
[fixed up commit-message:]
Signed-off-by: Philipp Tomsich

Merge git://git.denx.de/u-boot-sunxi

2017-05-22T19:20:28+00:00

trini: Make Kconfig SPL_xxx entires only show if SPL, so that we don't
get Kconfig errors on platforms without SPL, ie sandbox (without SPL).

Signed-off-by: Tom Rini

lib: move hash CONFIG options to Kconfig

2017-05-22T12:36:58+00:00

Commit 94e3c8c4fd7b ("crypto/fsl - Add progressive hashing support
using hardware acceleration.") created entries for CONFIG_SHA1,
CONFIG_SHA256, CONFIG_SHA_HW_ACCEL, and CONFIG_SHA_PROG_HW_ACCEL.
However, no defconfig has migrated to it.  Complete the move by first
adding additional logic to various Kconfig files to select this when
required and then use the moveconfig tool.  In many cases we can select
these because they are required to implement other drivers.  We also
correct how we include the various hashing algorithms in SPL.

This commit was generated as follows (after Kconfig additions):

[1] tools/moveconfig.py -y SHA1 SHA256 SHA_HW_ACCEL
[2] tools/moveconfig.py -y SHA_PROG_HW_ACCEL

Note:
We cannot move SHA_HW_ACCEL and SHA_PROG_HW_ACCEL simultaneously
because there is dependency between them.

Cc: Poonam Aggrwal 
Cc: Naveen Burmi 
Cc: Po Liu 
Cc: Shengzhou Liu 
Cc: Priyanka Jain 
Cc: Shaohui Xie 
Cc: Chunhe Lan 
Cc: Chander Kashyap 
Cc: Steve Rae 
Cc: Dirk Eibach 
Cc: Feng Li 
Cc: Alison Wang 
Cc: Sumit Garg 
Cc: Mingkai Hu 
Cc: York Sun 
Cc: Prabhakar Kushwaha 
Cc: Jaehoon Chung 
Cc: Akshay Saraswat 
Cc: Heiko Schocher 
Cc: Jagan Teki 
Signed-off-by: Tom Rini 
Reviewed-by: Simon Glass 
Signed-off-by: Tom Rini

FIT: Rename FIT_DISABLE_SHA256 to FIT_ENABLE_SHA256_SUPPORT

2017-05-22T11:29:55+00:00

We rename CONFIG_FIT_DISABLE_SHA256 to CONFIG_FIT_ENABLE_SHA256_SUPPORT which
is enabled by default and now a positive option.  Convert the handful of boards
that were disabling it before to save space.

Cc: Dirk Eibach 
Cc: Lukasz Dalek 
Signed-off-by: Tom Rini 
Reviewed-by: Simon Glass 
Reviewed-by: Simon Glass

sunxi: enable automatic FIT build for 64-bit SoCs

2017-05-17T17:53:25+00:00

The Allwinner SoCs with 64-bit cores use an ARM Trusted Firmware binary,
which needs to be loaded alongside U-Boot proper.
Set the respective Kconfig options to let them select this feature and
also automatically build the FIT image.

Signed-off-by: Andre Przywara 
Acked-by: Maxime Ripard 
[Rename Kconfig path to arch/arm/mach-sunxi/Kconfig]
Signed-off-by: Jagan Teki 
Reviewed-by: Jagan Teki

Makefile: add rules to generate SPL FIT images

2017-05-17T17:52:32+00:00

Some platforms require more complex U-Boot images than we can easily
generate via the mkimage command line, for instance to load additional
image files.
Introduce a CONFIG_SPL_FIT_SOURCE and CONFIG_SPL_FIT_GENERATOR symbol,
which can either hold an .its source file describing the image layout,
or, in the second case, a generator tool (script) to create such
a source file. This script gets passed the list of device tree files
from the CONFIG_OF_LIST variable.
A platform or board can define either of those in their defconfig file
to allow an easy building of such an image.

Signed-off-by: Andre Przywara 
Reviewed-by: Jagan Teki