u-boot.git/Kconfig, branch v2021.10

x86: kconfig: Drop ROM_NEEDS_BLOBS and BUILD_ROM

2021-08-02T07:11:40Z

These 2 options are no longer needed as now binman is used to build u-boot.rom. Signed-off-by: Bin Meng Reviewed-by: Simon Glass

kconfig / kbuild: Re-sync with Linux 4.20

2021-07-14T20:57:35Z

Align Kconfig and Kbuild logic to Linux 4.20 release with minimal impact on files outside of this scope. Our previous Kconfig sync was done by commit 587e4a429698 ("kconfig / kbuild: Re-sync with Linux 4.19"). As part of this re-sync, a few related changes from previous Linux releases were found to have been missed and merged in, and are not in the following list. The imported Linux commits are: [From prior to v4.19] b1e0d8b70fa3 kbuild: Fix gcc -x syntax a4353898980c kconfig: add CC_IS_GCC and GCC_VERSION 469cb7376c06 kconfig: add CC_IS_CLANG and CLANG_VERSION [From v4.19 to v4.20] 487c7c7702ab kbuild: prefix Makefile.dtbinst path with $(srctree) unconditionally 0d91bf584fe5 kbuild: remove old check for CFLAGS use 25815cf5ffec kbuild: hide most of targets when running config or mixed targets 00d78ab2ba75 kbuild: remove dead code in cmd_files calculation in top Makefile 23066c3f4e21 Compiler Attributes: enable -Wstringop-truncation on W=1 (gcc >= 8) 37c8a5fafa3b kbuild: consolidate Devicetree dtb build rules 80463f1b7bf9 kbuild: add --include-dir flag only for out-of-tree build 77ec0c20c7e0 kbuild: remove VERSION and PATCHLEVEL from $(objtree)/Makefile 74bc0c09b2da kbuild: remove user ID check in scripts/mkmakefile 4fd61277f662 kbuild: do not pass $(objtree) to scripts/mkmakefile 80d0dda3a4e5 kbuild: simplify command line creation in scripts/mkmakefile fb073a4b473e kbuild: add -Wno-pointer-sign flag unconditionally 9df3e7a7d7d6 kbuild: add -Wno-unused-but-set-variable flag unconditionally 69ea912fda74 kbuild: remove unneeded link_multi_deps 7d0ea2524202 kbuild: use 'else ifeq' for checksrc to improve readability 04c459d20448 kconfig: remove oldnoconfig target 0085b4191f3e kconfig: remove silentoldconfig target 3f80babd9ca4 kbuild: remove unused cc-fullversion variable 2cd3faf87d2d merge_config.sh: Allow to define config prefix 076f421da5d4 kbuild: replace cc-name test with CONFIG_CC_IS_CLANG 6bbe4385d035 kconfig: merge_config: avoid false positive matches from comment lines [From post v4.20] 885480b08469 Makefile: Move -Wno-unused-but-set-variable out of GCC only block There are a number of changes related to additional warnings as well as being able to drop cc-name entirely that have been omitted for now as additional work is required first. Cc: Masahiro Yamada Signed-off-by: Tom Rini

build: support building with Link Time Optimizations

2021-05-24T18:21:30Z

Add plumbing for building U-Boot with Link Time Optimizations. When building with LTO, $(PLATFORM_LIBS) has to be in --whole-archive / --no-whole-archive group, otherwise some functions declared in assembly may not be resolved and linking may fail. Note: clang may throw away linker list symbols it thinks are unused when compiling with LTO. To force these symbols to be included, we refer to them via the __ADDRESSABLE macro in a C file generated from compiled built-in.o files before linking. Signed-off-by: Marek Behún Reviewed-by: Simon Glass

spl: Tidy up SPL/TPL malloc sizes

2021-01-30T21:25:41Z

The current help talks about relocation which doesn't apply to SPL and TPL. Update it to avoid confusion. Also make the TPL size default to the same as the SPL size, since this is more likely to be a useful value than the one used by U-Boot proper, which may be quite a bit larger. Signed-off-by: Simon Glass

arm: actions: increase SYS_MALLOC_F_LEN

2020-11-09T19:18:10Z

after commit 4ab3817ff16a ("clk: fixed-rate: Enable DM_FLAG_PRE_RELOC flag") Cubieboard7 (based on actions S700 SoC) fails to boot. It is due to the fact that the default value of CONFIG_SYS_MALLOC_F_LEN (0x400) would not provide enough memory for clock device to probe (before relocation) well. This commit fixes it, by increasing SYS_MALLOC_F_LEN to value 0x2000. Suggested-by: Andre Przywara Signed-off-by: Amit Singh Tomar

Kconfig: Increase the pre-relocation memory

2020-10-28T15:49:31Z

The memory is close to full and adding a syscon node in test.dts makes it go over the limit and makes malloc() fail on startup. Signed-off-by: Pratyush Yadav Reviewed-by: Simon Glass

arm: sunxi: increase SYS_MALLOC_F_LEN

2020-10-21T18:22:49Z

The current default of 0x400 for SYS_MALLOC_F_LEN is too small if any additional drivers marked as DM_FLAG_PRE_RELOC are loaded before relocation. CONFIG_RSA=y which is needed for UEFI secure boot or for FIT image verification loads the driver mod_exp_sw which has DM_FLAG_PRE_RELOC. CONFIG_LOG=Y is another setting requiring additional early malloc area, cf. log_init(). When running pine64-lts_defconfig with CONFIG_RSA=y and debug UART enabled we see as output in main U-Boot alloc_simple() alloc space exhausted With this patch the default values of SYS_MALLOC_F_LEN and SPL_SYS_MALLOC_F_LEN on ARCH_SUNXI are raised to 0x2000. Signed-off-by: Heinrich Schuchardt Reviewed-by: Jagan Teki Reviewed-by: Simon Glass

Kconfig: Create a new tools menu

2020-10-09T16:02:26Z

At present MKIMAGE_DTC_PATH is in the devicetree menu but not within 'devicetree control' since it does not relate to that. As a result it shows up in the top menu. It actually relates to the mkimage tool, so create a new tools menu for it and move it there. Signed-off-by: Simon Glass

Kconfig: Move boot menu into common/

2020-10-09T15:59:48Z

Most of the boot options are in common/Kconfig but that file is already extremely large. Create a new Kconfig.boot to hold the boot options. Signed-off-by: Simon Glass

Kconfig: Add a 'Boot options' menu

2020-10-09T15:57:45Z

There are quite a few boot-related menu options at the top level. Create a new menu to hold these and move 'Boot images' into it. Signed-off-by: Simon Glass