u-boot.git/Kconfig, branch v2023.07

include: fdtdec: decouple fdt_addr_t and phys_addr_t size

2023-05-06T09:28:18Z

The DT specification supports CPUs with both 32-bit and 64-bit addressing capabilities. In U-boot the fdt_addr_t and phys_addr_t size are coupled by a typedef. The MTD NAND drivers for 32-bit CPU's can describe partitions with a 64-bit reg property. These partitions synced from Linux end up with the wrong offset and sizes when only the lower 32-bit is passed. Decouple the fdt_addr_t and phys_addr_t size as they don't necessary match. Signed-off-by: Johan Jonker Reviewed-by: Simon Glass Reviewed-by: Kever Yang

Kconfig: Remove an impossible condition

2023-04-28T00:32:05Z

ARCH_SUNXI selects BINMAN, so the condition "!BINMAN && ARCH_SUNXI" is impossible to satisfy. Signed-off-by: Samuel Holland Acked-by: Andre Przywara Signed-off-by: Andre Przywara

xen: Add dependency on armv8

2023-04-25T19:31:28Z

U-Boot currently implements hypervisor calls only for ARM64 that's why add dependency on ARM64. The hardware functionality is also available on ARMv7a, but currently not supported by U-Boot, hence it is not added to the list of dependencies here. Signed-off-by: Michal Simek

xen: Fix Kconfig dependencies

2023-04-25T19:31:28Z

XEN config can be enabled by other platforms (even it doesn't need to make sense) that's why fix dependencies. XEN (xenbus.c) requires sscanf (also pvblock needs it). And PVBLOCK is inside drivers/xen folder which requires XEN to be enabled. Signed-off-by: Michal Simek Reviewed-by: Heinrich Schuchardt

ARM: rmobile: Add R-Car Generation 4 support

2023-04-07T12:33:46Z

This adds R-Car Generation 4 (Gen4) support as Renesas ARM64 SoC. In this version, reusing R-Car Gen3 lowlevel initialize routine [1] and R-Car Gen3 memory map tables [2] . [1] arch/arm/mach-rmobile/lowlevel_init_gen3.S [2] arch/arm/mach-rmobile/memmap-gen3.c Reviewed-by: Marek Vasut Signed-off-by: Hai Pham Signed-off-by: Marek Vasut [Marek: - Enable DTO support by default - Sort the Kconfig lists - Select RCAR_64 Kconfig option to pull in all the shared Kconfig options with Gen3, and use where applicable to deduplicate entries. - Fix reference [2] typo in commit message - Drop config options moved to Kconfig, rename rest to CFG_ accordingly to synchronize with upstream changes. Drop removed CONFIG_VERY_BIG_RAM. - Move board size limit to arch/Kconfig - Move GICR_BASE to headers instead of common config]

api: move API related config options into submenu

2023-03-30T19:09:58Z

Kconfig settings that are related to the API for standalone applications should be in the API sub-menu and not on the top level. CONFIG_STANDALONE_LOAD_ADDR is only relevant if standalone example applications are built. Signed-off-by: Heinrich Schuchardt

Kconfig: Sort the BUILD_TARGET list

2023-03-30T19:09:58Z

Sort the defaults list in BUILD_TARGET Kconfig option. No functional change. Signed-off-by: Marek Vasut Reviewed-by: Simon Glass

Move DISTRO_DEFAULTS into boot/

2023-03-27T15:16:04Z

This relates to booting so move it in to that Kconfig file, before changing it. Signed-off-by: Simon Glass

powerpc/mpc85xx: Set default CONFIG_BUILD_TARGET

2023-01-10T20:39:07Z

Final U-Boot binary for mpc85xx boards which use SPL and are not PBL-based based is u-boot-with-spl.bin. PBL is not used only on boards with e500v1 and e500v2 cores. Apparently CONFIG_E500 is set not only for e500 cores, but also for all other mpc85xx cores e500mc, e5500 and e5600. So do not use CONFIG_E500 and instead filter new cores with PBL based bootrom. Signed-off-by: Pali Rohár

arm: mvebu: Fix default CONFIG_BUILD_TARGET

2023-01-10T20:39:07Z

u-boot-with-spl.kwb is built only for SPL enabled 32-bit armada boards. u-boot.kwb is built for 32-bit armada and kirkwood boards but only for non-SPL targets. So replace CONFIG_ARCH_MVEBU by CONFIG_ARMADA_32BIT (it implies CONFIG_ARCH_MVEBU) for u-boot-with-spl.kwb. And add additional CONFIG_ARMADA_32BIT && !CONFIG_SPL for u-boot.kwb. Signed-off-by: Pali Rohár