u-boot.git/Makefile, branch v2020.01-rc3 Unnamed repository; edit this file 'description' to name the repository. Prepare v2020.01-rc3 2019-11-19T02:31:49+00:00 Tom Rini trini@konsulko.com 2019-11-19T02:31:49+00:00 d4a31e8ee5592072d8d5208b3e950cba2d89b6bd Signed-off-by: Tom Rini <trini@konsulko.com> 
Signed-off-by: Tom Rini <trini@konsulko.com>
Merge tag 'dm-pull-14nov19' of git://git.denx.de/u-boot-dm 2019-11-18T02:15:23+00:00 Tom Rini trini@konsulko.com 2019-11-18T02:15:23+00:00 fd8adc33b8f999cb09c3ba8ea8860ded28e8d6ca Add OP-TEE test swuit Fix patman cc_file output Minor sandbox/pinctrl changes 
Add OP-TEE test swuit
Fix patman cc_file output
Minor sandbox/pinctrl changes
tests: add OP-TEE test suite 2019-11-14T13:09:34+00:00 Heiko Stuebner heiko.stuebner@theobroma-systems.com 2019-10-23T14:46:41+00:00 96383bdfe421f01de9c339570de40e9bfd9ef455 OP-TEE can get supplied with a devicetree and will then insert its firmware node and reserved-memory sections into it. As this devicetree often is not the one supplied to a later loaded kernel, a previous commit added functionality to transfer these nodes onto that new devicetree. To make sure this functionality stays intact, also add a test for the transfer functionality. Signed-off-by: Heiko Stuebner <heiko.stuebner@theobroma-systems.com> Reviewed-by: Simon Glass <sjg@chromium.org> 
OP-TEE can get supplied with a devicetree and will then insert
its firmware node and reserved-memory sections into it.
As this devicetree often is not the one supplied to a later
loaded kernel, a previous commit added functionality to transfer
these nodes onto that new devicetree.

To make sure this functionality stays intact, also add a test
for the transfer functionality.

Signed-off-by: Heiko Stuebner <heiko.stuebner@theobroma-systems.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
efi_loader: support building UEFI binaries on sandbox 2019-11-12T22:13:54+00:00 Heinrich Schuchardt xypron.glpk@gmx.de 2019-11-07T07:05:17+00:00 3b4847cbee7cf5c2a6ea19c25003876d0cba4ced On the sandbox the UEFI binaries must match the host architectures. Adjust the Makefiles. Provide the PE/COFF header and relocation files. Allow building helloworld.efi on the sandbox. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> 
On the sandbox the UEFI binaries must match the host architectures.

Adjust the Makefiles. Provide the PE/COFF header and relocation files.

Allow building helloworld.efi on the sandbox.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Prepare v2020.01-rc2 2019-11-12T02:01:10+00:00 Tom Rini trini@konsulko.com 2019-11-12T02:01:10+00:00 a965a8b904093c9e6790d0460d18a144cefa5e42 Signed-off-by: Tom Rini <trini@konsulko.com> 
Signed-off-by: Tom Rini <trini@konsulko.com>
usb: Add Cadence USB3 host and gadget driver 2019-11-06T23:24:59+00:00 Vignesh Raghavendra vigneshr@ti.com 2019-10-01T11:56:33+00:00 7e91f6ccdc84fe5952e5c26769e65d12e5fc4733 Add support for USB3 host and gadget driver. This is a direct sync of Linux kernel Cadence USB stack that from v5.4-rc1 release. Driver has been modified so that it compiles without errors against U-Boot code base. Features not required for U-Boot such as scatter-gather DMA and OTG interrupt handling has been dropped. Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com> [jjhiblot@ti.com: Add PHY support] Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com> 
Add support for USB3 host and gadget driver. This is a direct sync of
Linux kernel Cadence USB stack that from v5.4-rc1 release.
Driver has been modified so that it compiles without errors against
U-Boot code base.
Features not required for U-Boot such as scatter-gather DMA and OTG
interrupt handling has been dropped.

Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com>
[jjhiblot@ti.com: Add PHY support]
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Makefile: fix dependency for imx targets 2019-11-06T14:22:32+00:00 Heiko Schocher hs@denx.de 2019-10-25T12:46:54+00:00 0f282c1876af26cc2c8c018ae6293a691561011e imx targets are defined in arch/arm/mach-imx/Makefile. Some of them are dependent on targets defined in main Makefile. For the Makefile in arch/arm/mach-imx this targets must be finished before the imx targets are build, if not you get for example the error: make -f /home/hs/abb/mainlining/u-boot/scripts/Makefile.build obj=arch/arm/mach-imx u-boot-dtb.imx make[2]: *** No rule to make target 'u-boot-fit-dtb.bin', needed by 'u-boot-dtb.imx'. Stop. make[1]: *** [/home/hs/abb/mainlining/u-boot/Makefile:1123: u-boot-dtb.imx] Error 2 make[1]: *** Waiting for unfinished jobs.... make[1]: Leaving directory '/work/hs/compile/u-boot/aristainetos2_defconfig' make: *** [Makefile:148: sub-make] Error 2 compile failed In above case of CONFIG_MULTI_DTB_FIT is defined, the u-boot-dtb.imx is dependent on the u-boot-fit-dtb.bin which may is not build yet ... I could reproduce this error on a travis build also if I build an out-of-tree build on a local machine with a build directory on a "slow" slow storage device. If building the same source target with a build dir on a fast storage device, the build works. I found no solution to tell the arch/arm/mach-imx/Makefile to find the targets in main Makefile, if there is a way this would be the better fix. I solved it by adding a IMX_DEPS var, which holds a list of main u-boot targets, which must be finished, before calling imx targets and fixed the build for imx targets which enabled CONFIG_MULTI_DTB_FIT. I think it is just luck, that imx targets with CONFIG_OF_SEPARATE enabled build, because the u-boot-dtb.imx target depends on u-boot-dtb.bin which gets build early enough before starting with u-boot-dtb.imx. May this targets should be fixed too. Signed-off-by: Heiko Schocher <hs@denx.de> Reviewed-by: Tom Rini <trini@konsulko.com> 
imx targets are defined in arch/arm/mach-imx/Makefile.
Some of them are dependent on targets defined in main
Makefile. For the Makefile in arch/arm/mach-imx this
targets must be finished before the imx targets are
build, if not you get for example the error:

make -f /home/hs/abb/mainlining/u-boot/scripts/Makefile.build obj=arch/arm/mach-imx u-boot-dtb.imx
make[2]: *** No rule to make target 'u-boot-fit-dtb.bin', needed by 'u-boot-dtb.imx'.  Stop.
make[1]: *** [/home/hs/abb/mainlining/u-boot/Makefile:1123: u-boot-dtb.imx] Error 2
make[1]: *** Waiting for unfinished jobs....
make[1]: Leaving directory '/work/hs/compile/u-boot/aristainetos2_defconfig'
make: *** [Makefile:148: sub-make] Error 2
compile failed

In above case of CONFIG_MULTI_DTB_FIT is defined, the
u-boot-dtb.imx is dependent on the u-boot-fit-dtb.bin
which may is not build yet ...

I could reproduce this error on a travis build also if
I build an out-of-tree build on a local machine with a
build directory on a "slow" slow storage device. If
building the same source target with a build dir on a
fast storage device, the build works.

I found no solution to tell the arch/arm/mach-imx/Makefile
to find the targets in main Makefile, if there is a way
this would be the better fix.

I solved it by adding a IMX_DEPS var, which holds a list
of main u-boot targets, which must be finished, before
calling imx targets and fixed the build for imx
targets which enabled CONFIG_MULTI_DTB_FIT.

I think it is just luck, that imx targets with
CONFIG_OF_SEPARATE enabled build, because the
u-boot-dtb.imx target depends on u-boot-dtb.bin
which gets build early enough before starting with
u-boot-dtb.imx. May this targets should be fixed too.

Signed-off-by: Heiko Schocher <hs@denx.de>
Reviewed-by: Tom Rini <trini@konsulko.com>
spl: Add a size check for TPL 2019-11-02T23:20:27+00:00 Simon Glass sjg@chromium.org 2019-10-21T03:31:52+00:00 c52b5e8e2ce7f4cd3a9116083debd27ef23046d7 We have the ability to enforce a maximum size for SPL but not yet for TPL. Add a new option for this. Document the size check macro while we are here. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> 
We have the ability to enforce a maximum size for SPL but not yet for TPL.
Add a new option for this.

Document the size check macro while we are here.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Makefile: Fix printing problem in size_check on overflow 2019-10-30T21:48:47+00:00 Tom Rini trini@konsulko.com 2019-10-23T19:39:41+00:00 90037eb483d3b84eab214a080e41efde85d9f2de When we have an excess size growth, fix the "limit" printf call to pass in just the limit variable rather than the string bytes to the format character. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com> 
When we have an excess size growth, fix the "limit" printf call to pass
in just the limit variable rather than the string bytes to the format
character.

Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com>
Prepare v2020.01-rc1 2019-10-30T17:01:05+00:00 Tom Rini trini@konsulko.com 2019-10-30T17:01:05+00:00 1a81cf8ab735dfb0947dce497cf1503f59066c22 Signed-off-by: Tom Rini <trini@konsulko.com> 
Signed-off-by: Tom Rini <trini@konsulko.com>