u-boot.git/Makefile, branch v2022.10

Prepare v2022.10

2022-10-03T19:25:32+00:00

Signed-off-by: Tom Rini

Prepare v2022.10-rc5

2022-09-19T16:17:04+00:00

Signed-off-by: Tom Rini

Makefile: Unify condition for mpc85xx reset vector

2022-09-16T15:39:42+00:00

Use 'CONFIG_MPC85XX_HAVE_RESET_VECTOR && CONFIG_OF_SEPARATE' pattern
instead of 'CONFIG_MPC85XX_HAVE_RESET_VECTOR && !CONFIG_OF_EMBED' also in
OBJCOPYFLAGS_u-boot-nodtb.bin as this pattern is used in rest of Makefile.

Signed-off-by: Pali Rohár 
Reviewed-by: Simon Glass 
Signed-off-by: Marek Behún

Makefile: Reduce usage of custom mpc85xx u-boot.bin target

2022-09-16T15:39:42+00:00

Building of final u-boot.bin binary for mpc85xx via binman is needed only
when inserting DTB binary in the middle of the u-boot ELF binary (before
.bootpg and .resetvec ELF sections).

These requirements are met when CONFIG_MPC85XX_HAVE_RESET_VECTOR is enabled
(= generating .bootpg/.resetvec sections) and CONFIG_OF_SEPARATE is enabled
(= inserting DTB binary).

So in all other cases use standard build procedure instead of custom
mpc85xx u-boot.bin Makefile target via binman.

Signed-off-by: Pali Rohár 
Signed-off-by: Marek Behún

Makefile: Build final mpc85xx non-SPL image in standard file u-boot.bin

2022-09-16T15:39:41+00:00

Currently Makefile produces final mpc85xx image when SPL is not used in
custom file u-boot-with-dtb.bin. It is quite confusing name as build
process produce also intermediate file standard file u-boot-dtb.bin (which
is just intermediate and not bootable). Other platforms use u-boot.bin
(UBOOT_BIN) as standard name for final bootable raw image.

So change Makefile rules and binman to produce final bootable file for
mpc85xx also into file u-boot.bin. There is just need for mpc85xx to not
define default rule for u-boot.bin then instruct binman (via DTS file) to
store final image into u-boot.bin (instead of u-boot-with-dtb.bin) and
finally rename target u-boot-with-dtb.bin to u-boot.bin.

With this change are also removed custom Makefile hacks for mpc85xx that it
produced non-standard output file. And also updated documentation.

Signed-off-by: Pali Rohár 
Reviewed-by: Tom Rini 
Signed-off-by: Marek Behún

Makefile: Fix dependency for u-boot-with-dtb.bin

2022-09-16T15:39:39+00:00

Makefile uses binman to produce u-boot-with-dtb.bin target. As its input it
takes DTB file and u-boot binary without DTB, which is stored in file
u-boot-nodtb.bin. So fix target dependency.

Signed-off-by: Pali Rohár 
Reviewed-by: Tom Rini 
Reviewed-by: Simon Glass 
Signed-off-by: Marek Behún

Prepare v2022.10-rc4

2022-09-06T00:32:56+00:00

Signed-off-by: Tom Rini

rockchip: add u-boot-rockchip-spi.bin image for booting from SPI-NOR flash

2022-09-04T12:00:39+00:00

This new image is similar to u-boot-rockchip.bin except that it's
destined to be flashed on SPI-NOR flashes.

Cc: Quentin Schulz 
Signed-off-by: Quentin Schulz 
Reviewed-by: Kever Yang 
Reviewed-by: Simon Glass

rockchip: simplify binman image dependencies addition to INPUTS

2022-09-04T12:00:39+00:00

By factoring SPL check in the first condition, this makes the checks a
bit less convoluted and more readable.

Cc: Quentin Schulz 
Signed-off-by: Quentin Schulz 
Reviewed-by: Kever Yang 
Reviewed-by: Simon Glass

rockchip: generate u-boot-rockchip.bin with binman for ARM64 boards

2022-09-04T12:00:39+00:00

This allows to build u-boot-rockchip.bin binary with binman for Rockchip
ARM64 boards instead of the legacy Makefile way.

Cc: Quentin Schulz 
Signed-off-by: Quentin Schulz 
Reviewed-by: Simon Glass