u-boot.git/README, branch v2011.03-rc1

Fix defines needed to enable command sha1sum

2011-01-19T08:39:10+00:00

Documented is CONFIG_CMD_SHA1, through confusion in the source
CONFIG_CMD_SHA1 and CONFIG_CMD_SHA1SUM has to be used to enable
sha1sum.

Fix both, the documentation and the source, so that only
CONFIG_CMD_SHA1SUM is needed to enable the command sha1sum.

Signed-off-by: Alexander Holler

Merge branch 'master' of git://git.denx.de/u-boot-mpc85xx

2011-01-17T19:31:46+00:00

Merge branch 'master' of git://git.denx.de/u-boot-i2c

2011-01-17T19:11:40+00:00

powerpc/8xxx: Refactor SRIO initialization into common code

2011-01-14T07:32:21+00:00

Moved the SRIO init out of corenet_ds and into common code for
8xxx/QorIQ processors that have SRIO.  We mimic what we do with PCIe
controllers for SRIO.

We utilize the fact that SRIO is over serdes to determine if its
configured or not and thus can setup the LAWs needed for it dynamically.

We additionally update the device tree (to remove the SRIO nodes) if the
board doesn't have SRIO enabled.

Introduced the following standard defines for board config.h:

CONFIG_SYS_SRIO - Chip has SRIO or not
CONFIG_SRIO1 - Board has SRIO 1 port available
CONFIG_SRIO2 - Board has SRIO 2 port available

(where 'n' is the port #)
CONFIG_SYS_SRIOn_MEM_VIRT - virtual address in u-boot
CONFIG_SYS_SRIOn_MEM_PHYS - physical address (for law setup)
CONFIG_SYS_SRIOn_MEM_SIZE - size of window (for law setup)

[ These mimic what we have for PCI and PCIe controllers ]

Signed-off-by: Kumar Gala 
Acked-by: Wolfgang Denk

pca953x: support 16-pin devices

2011-01-10T06:53:00+00:00

This adds support for for the PCA9535/PCA9539 family of gpio devices which
have 16 output pins.

To let the driver know which devices are 16-pin it is necessary to define
CONFIG_SYS_I2C_PCA953X_WIDTH in your board config file. This is used to
create an array of {chip, ngpio} tuples that are used to determine the
width of a particular chip. For backwards compatibility it is assumed that
any chip not defined in CONFIG_SYS_I2C_PCA953X_WIDTH has 8 pins.

Acked-by: Peter Tyser 
Tested-by: Peter Tyser 
Signed-off-by: Chris Packham

ftgmac100: support of gigabit eth ftgmac100

2011-01-09T21:16:51+00:00

Add Faraday's ftgmac100 (gigabit ethernet)
MAC controller's driver.

Signed-off-by: Macpaul Lin

Coding Style (white space) cleanup

2010-11-27T22:35:14+00:00

Signed-off-by: Wolfgang Denk

Drop support for CONFIG_SKIP_RELOCATE_UBOOT

2010-10-29T19:40:08+00:00

For ARM systems, before ELF relocation was introduced,
CONFIG_SKIP_RELOCATE_UBOOT coul be used to prevent *COPYING* the
U-Boot image from whereever it was loaded to it's link address
(CONFIG_SYS_TEXT_BASE).  The name was badly chosen, as no relocation
was performed at all, it was just a memcpy().

With ELF relocation, this does not work like that any more, and
related boards need to be fixed anyway.  So don't keep this relict any
longer.

Signed-off-by: Wolfgang Denk 
Tested-by: Heiko Schocher 
Tested-by: Reinhard Meyer

Coding Style cleanup

2010-10-27T20:48:30+00:00

Signed-off-by: Wolfgang Denk

Rename CONFIG_SYS_INIT_RAM_END into CONFIG_SYS_INIT_RAM_SIZE

2010-10-26T19:03:25+00:00

CONFIG_SYS_INIT_RAM_END was a misnomer as it suggests this might be
some end address; to make the meaning more clear we rename it into
CONFIG_SYS_INIT_RAM_SIZE

No other code changes are performed in this patch, only minor editing
of white space (due to the changed length) and the comments was done,
where noticed.

Note that the code for the PATI and cmi_mpc5xx board configurations
looks seriously broken.  Last known maintainers on Cc:

Signed-off-by: Wolfgang Denk 
Cc: Denis Peter 
Cc: Martin Winistoerfer 
Acked-by: Kumar Gala