u-boot.git/README, branch v2013.07-rc1

usb: hub: make minimum power-on delay configurable

2013-06-12T20:22:51Z

This patch makes the minimum power-on delay for USB HUB become configurable. The original design waits at least 100 msec here, but some EHCI controlers(e.g. Faraday EHCI) are known to require much longer delay interval. Signed-off-by: Kuo-Jung Su CC: Marek Vasut

pci: introduce CONFIG_PCI_INDIRECT_BRIDGE option

2013-06-07T18:17:01Z

The pci_indirect.c file is always compiled when CONFIG_PCI is defined although the indirect PCI bridge support is not needed by every board. Introduce a new CONFIG_PCI_INDIRECT_BRIDGE config option and only compile indirect PCI bridge support if this options is enabled. Also add the new option into the configuration files of the boards which needs that. Compile tested for powerpc, x86, arm and nds32. MAKEALL results: powerpc: --------------------- SUMMARY ---------------------------- Boards compiled: 641 Boards with warnings but no errors: 2 ( ELPPC MPC8323ERDB ) ---------------------------------------------------------- Note: the warnings for ELPPC and MPC8323ERDB are present even without the actual patch. x86: --------------------- SUMMARY ---------------------------- Boards compiled: 1 ---------------------------------------------------------- arm: --------------------- SUMMARY ---------------------------- Boards compiled: 311 ---------------------------------------------------------- nds32: --------------------- SUMMARY ---------------------------- Boards compiled: 3 ---------------------------------------------------------- Cc: Tom Rini Cc: Daniel Schwierzeck Signed-off-by: Gabor Juhos

spl_mmc: add Falcon mode support for raw variant

2013-06-07T18:17:00Z

If Falcon mode support is enabled (and the system isn't directed into booting u-boot), it will instead try to load kernel from sector CONFIG_SYS_MMCSD_RAW_MODE_KERNEL_SECTOR and CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTORS of kernel argument parameters starting from sector CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTOR. Signed-off-by: Peter Korsgaard

spl_mmc: add Falcon mode support for FAT variant

2013-06-07T18:17:00Z

If Falcon mode support is enabled (and the system isn't directed into booting u-boot), it will instead try to load kernel from CONFIG_SPL_FAT_LOAD_KERNEL_NAME file and kernel argument parameters from CONFIG_SPL_FAT_LOAD_ARGS_NAME, both from the same partition as u-boot. Signed-off-by: Peter Korsgaard

tpm: Reorganize the I2C TPM driver

2013-06-03T08:31:23Z

This patch does a similar code reogranzation from http://patchwork.ozlabs.org/patch/132179/ which is based on an old version of code (fdt support and bus selection still not in). It merges this tidy-up on top of the recent code. It does not make any logical change. tpm.c implements the interface defined in tpm.h based on underlying LPC or I2C TPM driver. tpm.c and the underlying driver communicate throught tpm_private.h. Note: Merging the LPC driver with tpm.c is left to future patches. Change-Id: Ie1384f5f9e3935d3bc9a44adf8de80c5a70a5f2b Signed-off-by: Tom Wai-Hong Tam Signed-off-by: Simon Glass Reviewed-by: Simon Glass

tpm: Rename generic_lpc_tpm to tpm_tis_lpc

2013-06-03T08:26:25Z

The new name is more aligned with Linux kernel's naming of TPM driver. Signed-off-by: Peter Huewe Signed-off-by: Che-Liang Chiou Signed-off-by: Simon Glass Acked-by: Mike Frysinger Reviewed-by: Simon Glass Tested-by: Tom Wai-Hong Tam

Merge branch 'u-boot/master' into 'u-boot-arm/master'

2013-05-30T12:45:06Z

Conflicts: common/cmd_fpga.c drivers/usb/host/ohci-at91.c

README: Correct reference for CONFIG_SUPPORT_RAW_INITRD

2013-05-16T15:40:11Z

Signed-off-by: Tom Rini

Power: remove support for Freescale MPC8220

2013-05-15T12:41:03Z

The Freescale MPC8220 Power Architecture processors have long reached EOL; Freescale does not even list these any more on their web site. Remove the code to avoid wasting maitaining efforts on dead stuff. Signed-off-by: Wolfgang Denk Cc: Andy Fleming

image: Add CONFIG_FIT_SPL_PRINT to control FIT image printing in SPL

2013-05-14T19:37:25Z

This code is very large, and in SPL it isn't always useful to print out image information (in fact there might not even be a console active). So disable this feature unless this option is set. Signed-off-by: Simon Glass