u-boot.git/README, branch v2014.01-rc2

Add dumpimage, a tool to extract data from U-Boot images

2013-12-13T14:15:32+00:00

Given a multi-file image created through the mkimage's -d option:

  $ mkimage -A x86 -O linux -T multi -n x86 -d vmlinuz:initrd.img:System.map \
  multi.img

  Image Name:   x86
  Created:      Thu Jul 25 10:29:13 2013
  Image Type:   Intel x86 Linux Multi-File Image (gzip compressed)
  Data Size:    13722956 Bytes = 13401.32 kB = 13.09 MB
  Load Address: 00000000
  Entry Point:  00000000
  Contents:
     Image 0: 4040128 Bytes = 3945.44 kB = 3.85 MB
     Image 1: 7991719 Bytes = 7804.41 kB = 7.62 MB
     Image 2: 1691092 Bytes = 1651.46 kB = 1.61 MB

It is possible to perform the innverse operation -- extracting any file from
the image -- by using the dumpimage's -i option:

  $ dumpimage -i multi.img -p 2 System.map

Although it's feasible to retrieve "data files" from image through scripting,
the requirement to embed tools such 'dd', 'awk' and 'sed' for this sole purpose
is cumbersome and unreliable -- once you must keep track of file sizes inside
the image. Furthermore, extracting data files using "dumpimage" tool is faster
than through scripting.

Signed-off-by: Guilherme Maciel Ferreira 
Signed-off-by: Simon Glass

Merge branch 'master' of git://git.denx.de/u-boot-arm

2013-12-10T22:15:18+00:00

Conflicts:
	board/samsung/trats2/trats2.c
	include/configs/exynos5250-dt.h

Signed-off-by: Tom Rini

Merge branch 'u-boot/master' into 'u-boot-arm/master'

2013-12-10T21:23:59+00:00

Conflicts:
	arch/arm/cpu/armv7/rmobile/Makefile
	doc/README.scrapyard

Needed manual fix:
	arch/arm/cpu/armv7/omap-common/Makefile
	board/compulab/cm_t335/u-boot.lds

i2c: samsung: register i2c busses for Exynso5420 and Exynos5250

2013-12-06T06:46:23+00:00

This patch adds the U_BOOT_I2C_ADAP_COMPLETE defines for channels
on Exynos5420 and Exynos5250 and also adds support for init function
for hsi2c channels

Signed-off-by: Naveen Krishna Chatradhi

Merge branch 'master' of git://git.denx.de/u-boot-mpc85xx

2013-12-02T13:38:28+00:00

Driver/DDR: Add Freescale DDR driver for ARM

2013-11-25T19:43:46+00:00

Make PowerPC specific code conditional so ARM SoCs can reuse
this driver. Add DDR3 driver for ARM.

Signed-off-by: York Sun

Driver/DDR: Moving Freescale DDR driver to a common driver

2013-11-25T19:43:43+00:00

Freescale DDR driver has been used for mpc83xx, mpc85xx, mpc86xx SoCs.
The similar DDR controllers will be used for ARM-based SoCs.

Signed-off-by: York Sun

gpio_led: add support for inverted polarity

2013-11-25T15:41:52+00:00

Some GPIO connected LEDs have inverted polarity.
Introduce new config option: CONFIG_GPIO_LED_INVERTED_TABLE for the
specifying the inverted GPIO LEDs list and add support for this in the
gpio_led driver.

Signed-off-by: Igor Grinberg 
Tested-by: Ilya Ledvich

README: document the CONFIG_GPIO_LED symbol

2013-11-25T15:41:52+00:00

The CONFIG_GPIO_LED symbol does not have any documentation in the README
file. Document the CONFIG_GPIO_LED symbol.

Signed-off-by: Igor Grinberg

i2c, zynq: convert zynq i2c driver to new multibus/multiadapter framework

2013-11-13T05:18:27+00:00

- add zync i2c driver to new multibus/multiadpater support
- adapted all config files, which uses this driver

Signed-off-by: Heiko Schocher 
Cc: Joe Hershberger 
Cc: Michal Simek