u-boot.git/README, branch v2019.01 Unnamed repository; edit this file 'description' to name the repository. spi: Zap CONFIG_HARD_SPI 2018-11-27T15:36:53+00:00 Jagan Teki jagan@amarulasolutions.com 2018-11-24T09:01:12+00:00 35f9d9bdd07d5e508272421b215ffaffd867bad8 In legacy CONFIG_HARD_SPI initalizing spi_init code, which was removed during dm conversion cleanup. So remove the dead instances of CONFIG_HARD_SPI, and related code. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> 
In legacy CONFIG_HARD_SPI initalizing spi_init code, which
was removed during dm conversion cleanup.

So remove the dead instances of CONFIG_HARD_SPI, and related
code.

Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Merge branch 'master' of git://git.denx.de/u-boot-spi 2018-10-02T21:01:46+00:00 Tom Rini trini@konsulko.com 2018-10-02T17:02:22+00:00 592cd5defd4f71d34ffcbd8dd3326bc10f662e20 This is the PR for SPI-NAND changes along with few spi changes. [trini: Re-sync changes for ls1012afrwy_qspi*_defconfig] Signed-off-by: Tom Rini <trini@konsulko.com> 
This is the PR for SPI-NAND changes along with few spi changes.

[trini: Re-sync changes for ls1012afrwy_qspi*_defconfig]
Signed-off-by: Tom Rini <trini@konsulko.com>
MIPS: cache: remove config option CONFIG_SYS_MIPS_CACHE_MODE 2018-09-22T19:04:10+00:00 Daniel Schwierzeck daniel.schwierzeck@gmail.com 2018-09-07T17:02:06+00:00 46203baf665c6bab72bd5945a37d9a7e0a77699a Caches should be configured to mode CONF_CM_CACHABLE_NONCOHERENT (or CONF_CM_CACHABLE_COW when a CM is available). There is no need to make this configurable. Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com> 
Caches should be configured to mode CONF_CM_CACHABLE_NONCOHERENT
(or CONF_CM_CACHABLE_COW when a CM is available). There is no
need to make this configurable.

Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
MIPS: start.S: make boot config at offset 0x10 configurable 2018-09-22T18:59:22+00:00 Daniel Schwierzeck daniel.schwierzeck@gmail.com 2018-09-07T17:18:44+00:00 d1c3d8bdfa41a7002bc9c9c0fe8cf7b41d573c0e Some MIPS systems store some board-specific boot configuration in the U-Boot binary at offset 0x10. This is used by Malta boards and by Lantiq/Intel SoC's when booting from parallel NOR flash. Convert the hard-coded values to Kconfig options to remove such board-specific stuff out of the generic start.S code. This also deprecates the config option CONFIG_SYS_XWAY_EBU_BOOTCFG. Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com> 
Some MIPS systems store some board-specific boot configuration
in the U-Boot binary at offset 0x10. This is used by Malta boards
and by Lantiq/Intel SoC's when booting from parallel NOR flash.

Convert the hard-coded values to Kconfig options to remove such
board-specific stuff out of the generic start.S code. This also
deprecates the config option CONFIG_SYS_XWAY_EBU_BOOTCFG.

Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
mtd: move NAND files into a raw/ subdirectory 2018-09-20T14:40:49+00:00 Miquel Raynal miquel.raynal@bootlin.com 2018-08-16T15:30:07+00:00 a430fa06a4ac50e785fdbfb7f43c3cb14b35619c NAND flavors, like serial and parallel, have a lot in common and would benefit to share code. Let's move raw (parallel) NAND specific code in a raw/ subdirectory, to ease the addition of a core file in nand/ and the introduction of a spi/ subdirectory specific to SPI NANDs. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> 
NAND flavors, like serial and parallel, have a lot in common and would
benefit to share code. Let's move raw (parallel) NAND specific code in a
raw/ subdirectory, to ease the addition of a core file in nand/ and the
introduction of a spi/ subdirectory specific to SPI NANDs.

Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Remove CONFIG_USE_STDINT 2018-09-11T00:48:16+00:00 Masahiro Yamada yamada.masahiro@socionext.com 2018-08-06T11:47:38+00:00 9865543ae65d7c9a435eedfc6a0ba23efb291121 You do not need to use the typedefs provided by compiler. Our compilers are either IPL32 or LP64. Hence, U-Boot can/should always use int-ll64.h typedefs like Linux kernel, whatever the typedefs the compiler internally uses. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> 
You do not need to use the typedefs provided by compiler.

Our compilers are either IPL32 or LP64.  Hence, U-Boot can/should
always use int-ll64.h typedefs like Linux kernel, whatever the
typedefs the compiler internally uses.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Convert CONFIG_MII et al to Kconfig 2018-08-17T17:03:54+00:00 Adam Ford aford173@gmail.com 2018-07-21T04:03:57+00:00 d7869b2183d2b786e5410b97a5a6b2e630e7825e This converts the following to Kconfig: CONFIG_MII CONFIG_DRIVER_TI_EMAC Signed-off-by: Adam Ford <aford173@gmail.com> Acked-by: Jagan Teki <jagan@amarulasolutions.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com> 
This converts the following to Kconfig:
   CONFIG_MII
   CONFIG_DRIVER_TI_EMAC

Signed-off-by: Adam Ford <aford173@gmail.com>
Acked-by: Jagan Teki <jagan@amarulasolutions.com>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
README: U_BOOT_ENV_CALLBACK functions 2018-08-10T17:45:32+00:00 Heinrich Schuchardt xypron.glpk@gmx.de 2018-07-29T09:08:14+00:00 1b04047a875e8f3da78417c1a7f232e12490436d Describe the interface of environment variable callback functions. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> 
Describe the interface of environment variable callback functions.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Convert CONFIG_MTD_PARTITIONS et al to Kconfig 2018-07-22T23:20:17+00:00 Adam Ford aford173@gmail.com 2018-07-08T03:18:22+00:00 9c5b00973bceb7c0192bd6b03672d69b092700b4 This converts the following to Kconfig: CONFIG_MTD_PARTITIONS CONFIG_MTD_DEVICE Signed-off-by: Adam Ford <aford173@gmail.com> 
This converts the following to Kconfig:
   CONFIG_MTD_PARTITIONS
   CONFIG_MTD_DEVICE

Signed-off-by: Adam Ford <aford173@gmail.com>
spl, nand: add option CONFIG_SPL_NAND_IDENT to lookup for supported NAND chips 2018-06-27T10:20:55+00:00 Jörg Krause joerg.krause@embedded.rocks 2018-01-14T18:26:38+00:00 15e207faa0c32b587c173844936cadd7bf8dee01 Add the config option `CONFIG_SPL_NAND_IDENT` for using the NAND chip ID list to identify the NAND flash in SPL. Signed-off-by: Jörg Krause <joerg.krause@embedded.rocks> 
Add the config option `CONFIG_SPL_NAND_IDENT` for using the NAND chip ID list
to identify the NAND flash in SPL.

Signed-off-by: Jörg Krause <joerg.krause@embedded.rocks>