u-boot.git/README, branch v2019.04 Unnamed repository; edit this file 'description' to name the repository. Convert CONFIG_SF_DEFAULT_* to Kconfig 2019-03-25T21:36:53+00:00 Patrick Delaunay patrick.delaunay@st.com 2019-02-27T14:20:36+00:00 14453fbfadc2f98ca35d6033140466c7a4b4947a This converts the following to Kconfig: CONFIG_SF_DEFAULT_BUS CONFIG_SF_DEFAULT_CS CONFIG_SF_DEFAULT_MODE CONFIG_SF_DEFAULT_SPEED I use moveconfig script and then manual check on generated u-boot.cfg to solve the remaining issue. Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> 
This converts the following to Kconfig:
  CONFIG_SF_DEFAULT_BUS
  CONFIG_SF_DEFAULT_CS
  CONFIG_SF_DEFAULT_MODE
  CONFIG_SF_DEFAULT_SPEED

I use moveconfig script and then manual check on generated u-boot.cfg
to solve the remaining issue.

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
preboot: Introduce CONFIG_USE_PREBOOT and migrate CONFIG_PREBOOT 2019-02-23T00:49:41+00:00 Masahiro Yamada yamada.masahiro@socionext.com 2019-02-14T02:05:33+00:00 607d06d262a9949aa38895edb476448f186d577b This is the same migration path as commit b6251db8c3f0 ("Kconfig: Introduce USE_BOOTCOMMAND and migrate BOOTCOMMAND"). I also moved the description in README to the Kconfig help. I ripped off the sentence about 'LWMON' since it is gone already. I only let my boards migrate, leaving the rest to platform maintainers. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> 
This is the same migration path as commit b6251db8c3f0 ("Kconfig:
Introduce USE_BOOTCOMMAND and migrate BOOTCOMMAND").

I also moved the description in README to the Kconfig help.
I ripped off the sentence about 'LWMON' since it is gone already.

I only let my boards migrate, leaving the rest to platform maintainers.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
i2c: Remove ancient zynq_i2c driver 2019-02-14T13:31:10+00:00 Michal Simek michal.simek@xilinx.com 2019-01-22T11:50:12+00:00 f88185bcc3102ae747371dd0d3930938c2d8e9df This driver is replaced by drivers/i2c/i2c-cdns.c DM based driver. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Acked-by: Heiko Schocher <hs@denx.de> 
This driver is replaced by drivers/i2c/i2c-cdns.c DM based driver.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Acked-by: Heiko Schocher <hs@denx.de>
Kconfig: Migrate CONFIG_BUILD_TARGET 2019-02-02T13:23:57+00:00 Jagan Teki jagan@amarulasolutions.com 2019-01-18T07:22:49+00:00 dc146ca111873b1eabb9d0249ce0c1ec44e82a26 Migrate CONFIG_BUILD_TARGET into Kconfig. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> 
Migrate CONFIG_BUILD_TARGET into Kconfig.

Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
configs: Migrate CONFIG_DFU_MMC again 2019-01-25T17:04:16+00:00 Tom Rini trini@konsulko.com 2019-01-25T17:03:31+00:00 7196ce7ab79684166b4490c2959a142e5cfd7bbc A few platforms recently added in CONFIG_DFU_MMC under include/configs rather than via the defconfig, update them. Signed-off-by: Tom Rini <trini@konsulko.com> 
A few platforms recently added in CONFIG_DFU_MMC under include/configs
rather than via the defconfig, update them.

Signed-off-by: Tom Rini <trini@konsulko.com>
net: remove CONFIG_MCAST_TFTP 2019-01-24T17:35:30+00:00 Chris Packham judge.packham@gmail.com 2018-11-26T08:00:29+00:00 67bb984249442378ebb6a0eb68b6b0dd67dfbe72 No mainline board enables CONFIG_MCAST_TFTP and there have been compilation issues with the code for some time. Additionally, it has a potential buffer underrun issue (reported as a side note in CVE-2018-18439). Remove the multicast TFTP code but keep the driver API for the future addition of IPv6. Cc: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com> Signed-off-by: Chris Packham <judge.packham@gmail.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com> 
No mainline board enables CONFIG_MCAST_TFTP and there have been
compilation issues with the code for some time. Additionally, it has a
potential buffer underrun issue (reported as a side note in
CVE-2018-18439).

Remove the multicast TFTP code but keep the driver API for the future
addition of IPv6.

Cc: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com>
Signed-off-by: Chris Packham <judge.packham@gmail.com>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
spi: Zap CONFIG_HARD_SPI 2018-11-27T15:36:53+00:00 Jagan Teki jagan@amarulasolutions.com 2018-11-24T09:01:12+00:00 35f9d9bdd07d5e508272421b215ffaffd867bad8 In legacy CONFIG_HARD_SPI initalizing spi_init code, which was removed during dm conversion cleanup. So remove the dead instances of CONFIG_HARD_SPI, and related code. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> 
In legacy CONFIG_HARD_SPI initalizing spi_init code, which
was removed during dm conversion cleanup.

So remove the dead instances of CONFIG_HARD_SPI, and related
code.

Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Merge branch 'master' of git://git.denx.de/u-boot-spi 2018-10-02T21:01:46+00:00 Tom Rini trini@konsulko.com 2018-10-02T17:02:22+00:00 592cd5defd4f71d34ffcbd8dd3326bc10f662e20 This is the PR for SPI-NAND changes along with few spi changes. [trini: Re-sync changes for ls1012afrwy_qspi*_defconfig] Signed-off-by: Tom Rini <trini@konsulko.com> 
This is the PR for SPI-NAND changes along with few spi changes.

[trini: Re-sync changes for ls1012afrwy_qspi*_defconfig]
Signed-off-by: Tom Rini <trini@konsulko.com>
MIPS: cache: remove config option CONFIG_SYS_MIPS_CACHE_MODE 2018-09-22T19:04:10+00:00 Daniel Schwierzeck daniel.schwierzeck@gmail.com 2018-09-07T17:02:06+00:00 46203baf665c6bab72bd5945a37d9a7e0a77699a Caches should be configured to mode CONF_CM_CACHABLE_NONCOHERENT (or CONF_CM_CACHABLE_COW when a CM is available). There is no need to make this configurable. Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com> 
Caches should be configured to mode CONF_CM_CACHABLE_NONCOHERENT
(or CONF_CM_CACHABLE_COW when a CM is available). There is no
need to make this configurable.

Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
MIPS: start.S: make boot config at offset 0x10 configurable 2018-09-22T18:59:22+00:00 Daniel Schwierzeck daniel.schwierzeck@gmail.com 2018-09-07T17:18:44+00:00 d1c3d8bdfa41a7002bc9c9c0fe8cf7b41d573c0e Some MIPS systems store some board-specific boot configuration in the U-Boot binary at offset 0x10. This is used by Malta boards and by Lantiq/Intel SoC's when booting from parallel NOR flash. Convert the hard-coded values to Kconfig options to remove such board-specific stuff out of the generic start.S code. This also deprecates the config option CONFIG_SYS_XWAY_EBU_BOOTCFG. Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com> 
Some MIPS systems store some board-specific boot configuration
in the U-Boot binary at offset 0x10. This is used by Malta boards
and by Lantiq/Intel SoC's when booting from parallel NOR flash.

Convert the hard-coded values to Kconfig options to remove such
board-specific stuff out of the generic start.S code. This also
deprecates the config option CONFIG_SYS_XWAY_EBU_BOOTCFG.

Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>