Renaming SPL to XPL fixes the issue referenced in this note so the note
is no longer necessary

Fixes: 1d6132e2a2b ("global: Use CONFIG_XPL_BUILD instead of CONFIG_SPL_BUILD")

Signed-off-by: Philip Molloy <philip.molloy@analog.com>

Drop CFG_SH_ETHER_PHY_ADDR from README and configuration files, this
value is never used, PHY address is extracted from control DT instead.
No functional change intended.

Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>

Drop CFG_SH_ETHER_CACHE_WRITEBACK and CFG_SH_ETHER_CACHE_INVALIDATE,
which are now always enabled in the sh_eth driver, because those cache
operations are always available. On architectures which do not implement
cache operations yet, cache operations have to be implemented first.

CFG_SH_ETHER_ALIGNE_SIZE now set as SH_ETHER_ALIGN_SIZE in sh_eth.h
based on architecture and no longer configured on board level.

Remove CFG_SH_ETHER_CACHE_WRITEBACK configuration option from README.

Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>

The CFG_SH_ETHER_USE_PORT configuration option is a remnant from
before U-Boot DM existed and SH Ethernet made full use of it, and
is no longer used, remove it.

Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>

There are no users of DELAY_ENVIRONMENT and the same effect can
be achieved either using DT /config/load-environment property,
or by using ENV_IS_NOWHERE . Remove this configuration option
and matching functionality.

Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>

The way we enable ULPI support today isn't something that should work.
The "optional" keyword in a choice statement is not a documented
feature. To make this work in a supported way, make USB_ULPI something
we ask about if USB_HOST is set. Next, we move the choice of what
viewer to use to be after the framework portion and to depend on that.
We then borrow a few words from the top-level README to make the help
text here clearer. Finally we make the Qualcomm driver select ULPI as
it's required and we make the tegra driver not duplicate a check that
Kconfig now handles for us.

Signed-off-by: Tom Rini <trini@konsulko.com>

This fixture name is quite long and results in lots of verbose code.
We know this is U-Boot so the 'u_boot_' part is not necessary.

But it is also a bit of a misnomer, since it provides access to all the
information available to tests. It is not just the console.

It would be too confusing to use con as it would be confused with
config and it is probably too short.

So shorten it to 'ubman'.

Signed-off-by: Simon Glass <sjg@chromium.org>
Link: https://lore.kernel.org/u-boot/CAFLszTgPa4aT_J9h9pqeTtLCVn4x2JvLWRcWRD8NaN3uoSAtyA@mail.gmail.com/

Simon Glass <sjg@chromium.org> says:

When the SPL build-phase was first created it was designed to solve a
particular problem (the need to init SDRAM so that U-Boot proper could
be loaded). It has since expanded to become an important part of U-Boot,
with three phases now present: TPL, VPL and SPL

Due to this history, the term 'SPL' is used to mean both a particular
phase (the one before U-Boot proper) and all the non-proper phases.
This has become confusing.

For a similar reason CONFIG_SPL_BUILD is set to 'y' for all 'SPL'
phases, not just SPL. So code which can only be compiled for actual SPL,
for example, must use something like this:

   #if defined(CONFIG_SPL_BUILD) && !defined(CONFIG_TPL_BUILD)

In Makefiles we have similar issues. SPL_ has been used as a variable
which expands to either SPL_ or nothing, to chose between options like
CONFIG_BLK and CONFIG_SPL_BLK. When TPL appeared, a new SPL_TPL variable
was created which expanded to 'SPL_', 'TPL_' or nothing. Later it was
updated to support 'VPL_' as well.

This series starts a change in terminology and usage to resolve the
above issues:

- The word 'xPL' is used instead of 'SPL' to mean a non-proper build
- A new CONFIG_XPL_BUILD define indicates that the current build is an
  'xPL' build
- The existing CONFIG_SPL_BUILD is changed to mean SPL; it is not now
  defined for TPL and VPL phases
- The existing SPL_ Makefile variable is renamed to SPL_
- The existing SPL_TPL Makefile variable is renamed to PHASE_

It should be noted that xpl_phase() can generally be used instead of
the above CONFIGs without a code-space or run-time penalty.

This series does not attempt to convert all of U-Boot to use this new
terminology but it makes a start. In particular, renaming spl.h and
common/spl seems like a bridge too far at this point.

The series is fully bisectable. It has also been checked to ensure there
are no code-size changes on any commit.

Complete this rename for all directories outside arch/ board/ drivers/
and include/

Use the new symbol to refer to any 'SPL' build, including TPL and VPL

Signed-off-by: Simon Glass <sjg@chromium.org>

Move this section to rst, changing it just enough so that it builds.

Signed-off-by: Simon Glass <sjg@chromium.org>