u-boot.git/arch/Kconfig.nxp, branch main

board: nxp: vid: introduce PMBus framework support

2026-07-13T01:16:58Z

Wire board/nxp/common/vid.c into the framework so the legacy NXP AVS path stops carrying its own duplicate copy of the PMBus protocol and instead consumes the shared constants, decoders, and transport helpers. vid.c is the legacy NXP AVS/pre-kernel voltage-trim path for lx2160 CPUs. It does PMBus to whichever core-rail voltage monitor the board carries: LTC3882 or ISL68233 are selected with CONFIG_VOL_MONITOR_LTC3882_*/CONFIG_VOL_MONITOR_ISL68233_*. Before this change the file kept its own local PMBUS_CMD_* command-code defines, its own inline LINEAR16 mantissa/exponent math, and called into I2C through the I2C_READ/I2C_WRITE NXP wrappers in board/nxp/common/i2c_common.{c,h} which is a parallel implementation of exactly what + lib/pmbus.c provides. The intent is to make vid.c an consumer of the new PMBus. Compatibility with the former support: - CLI unchanged: vdd_override and vdd_read keep their existing semantics, return codes, and diagnostic output. - I2C transport unchanged on the wire: the framework's pmbus_* helpers call dm_i2c_read/dm_i2c_write: the same DM I2C backing that vid.c's former I2C_READ/I2C_WRITE macros already routed through on DM_I2C. - Numeric decode is bit-equivalent: pmbus_reg2data_linear16() and pmbus_data2reg_linear16() implement the PMBus 1.3 Part II mantissa/exponent. Signed-off-by: Vincent Jardin Signed-off-by: Peng Fan

nxp: Move FSL_SEC_MON related options to arch/Kconfig.nxp

2025-07-17T12:57:39Z

The options related to FSL_SEC_MON are part of the chain of trust related options and should be under that menu, so move it there. Furthermore we don't need to prompt for the driver itself but do need to allow for configuration of the monitor endianess. Signed-off-by: Tom Rini

LFU-544: Kconfig.nxp: Fixed secure boot on LS-CH2 platforms

2023-07-06T05:04:56Z

pimg64 image pointer is dependent on ESBC_ADDR_64BIT config, which is getting disabled, due to dependency on ESBC_HDR_LS. ESBC_HDR_LS is required for LS-CH3 platforms. So, removing the dependency on ESBC_HDR_LS. Signed-off-by: Kshitiz Varshney Acked-by: Peng Fan Reviewed-by: Gaurav Jain

global: Use proper project name U-Boot

2023-06-12T11:24:31Z

Use proper project name in comments, Kconfig, readmes. Reviewed-by: Neil Armstrong Acked-by: Ilias Apalodimas Reviewed-by: Stefan Roese Reviewed-by: Qu Wenruo Signed-off-by: Michal Simek Link: https://lore.kernel.org/r/0dbdf0432405c1c38ffca55703b6737a48219e79.1684307818.git.michal.simek@amd.com

nxp: Finish migration of SYS_FSL_SRDS_[12] to Kconfig

2023-01-20T17:27:23Z

As this is used on both ARM and PowerPC platforms, this needs to be listed in arch/Kconfig.nxp and match how they're currently used by select'ing them under the required PowerPC ARCH_xxx options. Signed-off-by: Tom Rini

nxp: Finish migration of SYS_FSL_IFC_BANK_COUNT to Kconfig

2023-01-20T17:27:06Z

As this is used on both ARM and PowerPC platforms, this needs to be asked in arch/Kconfig.nxp. Set the PowerPC defaults based on arch/powerpc/include/asm/config_mpc85xx.h and remove the default set in drivers/mtd/nand/raw/fsl_ifc_nand.c Signed-off-by: Tom Rini

Kconfig: move NXP specific stuff into a sub-menu

2023-01-11T20:02:24Z

Having NXP specific items in the main menu is confusing. Especially the comment line *** Other functionality shared between NXP SoCs *** is simply misleading. Move all NXP stuff into a separate sub-menu. Signed-off-by: Heinrich Schuchardt

Convert CONFIG_FLASH_SPANSION_S29WS_N et al to Kconfig

2022-12-22T15:31:48Z

This converts the following to Kconfig: CONFIG_FLASH_SPANSION_S29WS_N CONFIG_FLASH_VERIFY CONFIG_FSL_FM_10GEC_REGULAR_NOTATION CONFIG_FSL_ISBC_KEY_EXT CONFIG_FSL_TRUST_ARCH_v1 CONFIG_FSL_SDHC_V2_3 CONFIG_MAX_DSP_CPUS CONFIG_MIU_2BIT_INTERLEAVED CONFIG_SERIAL_BOOT CONFIG_SPI_BOOTING CONFIG_X86EMU_RAW_IO Signed-off-by: Tom Rini

Convert CONFIG_SYS_PMAN et al to Kconfig

2022-12-05T21:06:07Z

This converts the following to Kconfig: CONFIG_NOBQFMAN CONFIG_SYS_DPAA_DCE CONFIG_SYS_DPAA_FMAN CONFIG_SYS_DPAA_PME CONFIG_SYS_DPAA_RMAN CONFIG_SYS_PMAN Signed-off-by: Tom Rini Reviewed-by: Simon Glass

Convert CONFIG_SYS_FSL_NUM_CC_PLLS to Kconfig

2022-08-12T20:10:49Z

This converts the following to Kconfig: CONFIG_SYS_FSL_NUM_CC_PLLS Signed-off-by: Tom Rini