u-boot.git/arch/arc/include/asm/arcregs.h, branch master

arc: Cleanup and audit usage of

2023-12-21T13:54:37+00:00

We need to include  directly when a file needs to have
something such as CFG_SYS_SDRAM_SIZE referenced as this file is not
automatically globally included and is most commonly indirectly included
via common.h.  Remove most cases of arc including config.h directly, but
add it where needed. Further clean up the tb100 board config.h file so
that we don't rely on config.h being included there for a value used in
a single place.

Reviewed-by: Simon Glass 
Signed-off-by: Tom Rini

common: Drop linux/bitops.h from common header

2020-05-19T01:19:23+00:00

Move this uncommon header out of the common header.

Signed-off-by: Simon Glass

ARC: HSDK-4xD: add CSM configuration support

2020-04-27T08:20:27+00:00

Add support for CSM enable/disable and CSM relocation via
hsdk_init command. We allow to relocate CSM to the beginning of
any aperture even if HW support finer granularity.

Signed-off-by: Eugeniy Paltsev 
Signed-off-by: Alexey Brodkin

ARC: ARCv2: handle DSP presence in HW

2020-04-27T08:20:25+00:00

In case of DSP extension presence in HW some instructions
(related to integer multiply, multiply-accumulate, and divide
operation) executes on this DSP execution unit. So their
execution will depend on dsp configuration register (DSP_CTRL)
As we want these instructions to execute the same way regardless
of DSP presence we need to set DSP_CTRL properly.

NOTE:
we do the same adjustments in Linux kernel, see in kernel tree:
commit 4827d0cf744e ("ARC: handle DSP presence in HW")

Signed-off-by: Eugeniy Paltsev 
Signed-off-by: Alexey Brodkin

ARC: Improve identification of ARC cores

2018-12-03T11:26:18+00:00

1. Try to guess a ARC core template that was used
   i.e. not just name a core family but something more
   menaingful like "ARC HS38", "ARC EM11D" etc.

   We do it checking availability of the key differentiation
   features like:
    - Caches (we actually only check for L1 I$ fpr simplicity)
    - XY-memory
    - DSP extensions etc.

2. Identify ARC subsystems

3. Print core clock frequency

Signed-off-by: Alexey Brodkin

ARC: Enable unaligned access in hardware if compiler uses it

2018-07-31T04:49:47+00:00

Even if ARC core might handle unaligned access to data this
hardware feature by default is disabled.

But GCC starting from 8.1.0 unconditionally uses it for ARC HS cores.
Which leads to quite strange and fatal run-time failures like the one
below if HW is not configured properly:
| hsdk# sf probe
| Misaligned data access exception @ 0xbff794d4
| ECR:    0x000d0000
| RET:    0xbff794d4
| BLINK:  0xbff79644
| STAT32: 0x00000800
| GP: 0x1003e000   r25: 0xbfd58f08
| BTA: 0xbff794a4  SP: 0xbfd58cd4  FP: 0xbfd58ef0
| LPS: 0xbff90240 LPE: 0xbff90244 LPC: 0x00000000
| r00: 0x00000000 r01: 0x00000003 r02: 0x000026bf
| r03: 0x00000000 r04: 0x00000100 r05: 0x00000000
| r06: 0x00000001 r07: 0x00000000 r08: 0x1dcd6500
| r09: 0x00000000 r10: 0x00200000 r11: 0x00000000
| r12: 0x1b3d4440 r13: 0xbff9eca4 r14: 0xbfd59d68
| r15: 0xbfd60cd0 r16: 0x00000000 r17: 0x00000000
| r18: 0xbff9ed14 r19: 0xbfd59c78 r20: 0xbfd58d40
| r21: 0xbfd58d44 r22: 0x00000000 r23: 0x00000000
| r24: 0xbfd59ba8
| Resetting CPU ...

Now we're checking for __ARC_UNALIGNED__ define emitted by the
compiler if it's going to use unaligned access and then we
force-enable it in hardware too.

Signed-off-by: Alexey Brodkin

SPDX: Convert all of our single license tags to Linux Kernel style

2018-05-07T13:34:12+00:00

When U-Boot started using SPDX tags we were among the early adopters and
there weren't a lot of other examples to borrow from.  So we picked the
area of the file that usually had a full license text and replaced it
with an appropriate SPDX-License-Identifier: entry.  Since then, the
Linux Kernel has adopted SPDX tags and they place it as the very first
line in a file (except where shebangs are used, then it's second line)
and with slightly different comment styles than us.

In part due to community overlap, in part due to better tag visibility
and in part for other minor reasons, switch over to that style.

This commit changes all instances where we have a single declared
license in the tag as both the before and after are identical in tag
contents.  There's also a few places where I found we did not have a tag
and have introduced one.

Signed-off-by: Tom Rini

ARC: Introduce is_isa_X() functions

2018-03-21T14:06:49+00:00

Introduce is_isa_arcv2() and is_isa_arcompact() functions.

These functions only check configuration options and return
compile-time constant so they can be used instead of #ifdef's to
to write cleaner code.

Now we can write:
-------------->8---------------
if (is_isa_arcv2())
	ioc_configure();
-------------->8---------------
instead of:
-------------->8---------------
ifdef CONFIG_ISA_ARCV2
	ioc_configure();
endif
-------------->8---------------

Signed-off-by: Eugeniy Paltsev 
Signed-off-by: Alexey Brodkin

ARC: ARCv2: Cache: Fixed operation without IOC

2018-01-19T14:59:34+00:00

Previous SLC management implementation is broken. Seems like it was
never sufficiently tested probably because most of the time IOC was used
instead (i.e. no manual cache operations were done).

Now if we disable IOC in U-boot we'll get a lot of errors while using
DMA-enabled peripherals.

This time we fix it by substitution of broken per-line SLC operations
region operations as it is done in the Linux kernel (we took it from
v4.14 which is the latest stable as of today).

Among other things this implementation might be a bit faster because
instead of iteration over each and every cache line we're taking care
about entire region in one go.

Main changes:
 * Replaced __slc_line_op (per line operations) by __slc_rgn_op
   (region operations).

 * Reworked __slc_entire_op to get rid of __after_slc_op and
   __before_slc_op functions.
   Note flush fix (flush only instead of flush-n-inv when OP_FLUSH is
   used, see [1] for more details) is already incorporated here.

 * Added SLC invalidation to invalidate_icache_all().

 * Added (start >= end) check to invalidate_dcache_range() and
   flush_dcache_range() as some buggy drivers pass region start == end.

 * Added read-out of MMU BCR so we may know if PAE40 exists in HW and then
   act on a particular AUX regs accordingly.

[1] http://lists.infradead.org/pipermail/linux-snps-arc/2018-January/003357.html

Signed-off-by: Eugeniy Paltsev 
Signed-off-by: Alexey Brodkin

ARC: add defines of some cache and xCCM AUX registers

2017-12-11T08:36:22+00:00

Signed-off-by: Eugeniy Paltsev 
Signed-off-by: Alexey Brodkin