u-boot.git/arch/arm/Makefile, branch v2017.03

Merge branch 'master' of git://www.denx.de/git/u-boot-imx

2017-02-01T21:34:25Z

aspeed: Add drivers common to all Aspeed SoCs

2017-01-28T19:04:27Z

Add support for Watchdog Timer, which is compatible with AST2400 and AST2500 watchdogs. There is no uclass for Watchdog yet, so the driver does not follow the driver model. It also uses fixed clock, so no clock driver is needed. Add support for timer for Aspeed ast2400/ast2500 devices. The driver actually controls several devices, but because all devices share the same Control Register, it is somewhat difficult to completely decouple them. Since only one timer is needed at the moment, this should be OK. The timer uses fixed clock, so does not rely on a clock driver. Add sysreset driver, which uses watchdog timer to do resets and particular watchdog device to use is hardcoded (0) Reviewed-by: Simon Glass

ARM: imx6ul: Move liteSOM source to SoC directory

2017-01-27T09:48:07Z

Moving arch/arm/mach-litesom/ to arch/arm/cpu/armv7/mx6/ was requested in [1] during discussion of chiliSOM support patches. [1] http://lists.denx.de/pipermail/u-boot/2017-January/279137.html Suggested-by: Tom Rini Signed-off-by: Marcin Niestroj Reviewed-by: Tom Rini

arm: imx: remove bmode , hdmidet and dek commands from SPL

2017-01-02T16:04:14Z

These files are blowing up the SPL and should not be required there as the SPL delivers no command console. Because building fails for mx27 and mx31 machines with SPL build, we remove the linker flag for them from the Makefile. Nothing is built for them to be linked in that directory. Cc: sbabic@denx.de v2 Changes: - Remove mx27 and mx31 from Makefile during SPL build as nothing is built for them in that directory. And removing the commands with the libs-y directive lead to linker failures. e.g. "armv5te-ld.bfd: cannot find arch/arm/imx-common/built-in.o: No such file or directory)" Signed-off-by: Sven Ebenfeld Reviewed-by: George McCollister Tested-by: George McCollister

ARM: imx6ul: Add support for liteSOM

2016-12-16T09:31:04Z

liteSOM is a System On Module (http://grinn-global.com/litesom/). It can't exists on its own, but will be used as part of other boards. Hardware specification: * NXP i.MX6UL processor * 256M or 512M DDR3 memory * optional eMMC (uSDHC2) Here we treat SOM similar to SOC, so we place it inside arch/arm/mach-* directory and make it possible to reuse initialization code (i.e. DDR, eMMC init) for all boards that use it. Signed-off-by: Marcin Niestroj

arm: Introduce arch/arm/mach-omap2 for OMAP2 derivative platforms

2016-11-21T19:07:29Z

This moves what was in arch/arm/cpu/armv7/omap-common in to arch/arm/mach-omap2 and moves arch/arm/cpu/armv7/{am33xx,omap3,omap4,omap5} in to arch/arm/mach-omap2 as subdirectories. All refernces to the former locations are updated to the current locations. For the logic to decide what our outputs are, consolidate the tests into a single config.mk rather than including 4. Signed-off-by: Tom Rini

Merge branch 'rmobile' of git://git.denx.de/u-boot-sh

2016-08-20T20:40:34Z

[trini: Drop CMD_BOOTI as it's now on by default on ARM64] Signed-off-by: Tom Rini

ARM: Rmobile: Rename CONFIG_RMOBILE to CONFIG_ARCH_RMOBILE

2016-08-17T01:25:34Z

Signed-off-by: Nobuhiro Iwamatsu

ARM: rmobile: Move SoC sources to mach-rmobile

2016-08-17T01:25:28Z

Move from arch/arm/cpu/armv7/rmobile/ to arch/arm/mach-rmobile/. Signed-off-by: Nobuhiro Iwamatsu

ARM: Rework and correct barrier definitions

2016-08-05T11:23:57Z

As part of testing booting Linux kernels on Rockchip devices, it was discovered by Ziyuan Xu and Sandy Patterson that we had multiple and for some cases incomplete isb definitions. This was causing a failure to boot of the Linux kernel. In order to solve this problem as well as cover any corner cases that we may also have had a number of changes are made in order to consolidate things. First, now becomes the source of isb/dsb/dmb definitions. This however introduces another complexity. Due to needing to build SPL for 32bit tegra with -march=armv4 we need to borrow the __LINUX_ARM_ARCH__ logic from the Linux Kernel in a more complete form. Move this from arch/arm/lib/Makefile to arch/arm/Makefile and add a comment about it. Now that we can always know what the target CPU is capable off we can get always do the correct thing for the barrier. The final part of this is that need to be consistent everywhere and call isb()/dsb()/dmb() and NOT call ISB/DSB/DMB in some cases and the function names in others. Reviewed-by: Stephen Warren Tested-by: Stephen Warren Acked-by: Ziyuan Xu Acked-by: Sandy Patterson Reported-by: Ziyuan Xu Reported-by: Sandy Patterson Signed-off-by: Tom Rini