u-boot.git/arch/arm/cpu/arm926ejs/mx25, branch v2016.09

imx: cpu: move common chip revision id's

2015-10-30T14:20:56Z

Move common chip revision id's to main cpu header file mx25 generic include cpu header for chip revision Signed-off-by: Adrian Alonso

mx25: Fix boot hang by avoiding vector relocation

2015-01-08T18:50:17Z

Since commit 3ff46cc42b9d73d0 ("arm: relocate the exception vectors") mx25pdk hangs like this: CPU: Freescale i.MX25 rev1.2 at 399 MHz Reset cause: WDOG Board: MX25PDK I2C: ready DRAM: 64 MiB (hangs) Add a specific relocate_vectors macro that skips the vector relocation, as the i.MX25 SoC does not provide RAM at the high vectors address (0xFFFF0000), and (0x00000000) maps to ROM. This allows mx25 to boot again. Acked-By: Bill Pringlemeir Signed-off-by: Fabio Estevam

mx25: Remove empty line after printing the reset cause

2015-01-08T16:00:45Z

Currently there is an unneeded empty line after printing the reset cause: U-Boot 2015.01-rc4-00080-g0551a93 (Jan 06 2015 - 13:04:19) CPU: Freescale i.MX25 rev1.2 at 399 MHz Reset cause: POR Board: MX25PDK I2C: ready DRAM: 64 MiB MMC: FSL_SDHC: 0 Remove the extra "\n" when printing the reset cause. Signed-off-by: Fabio Estevam

kbuild: move asm-offsets.c from SoC directory to arch/$(ARCH)/lib

2014-03-28T19:06:29Z

U-Boot has supported two kinds of asm-offsets.h. One is generic for all architectures and its source is located at ./lib/asm-offsets.c. The other is SoC specific and its source is under SoC directory. The problem here is that only boards with SoC directory can use the asm-offsets infrastructure. Putting asm-offsets.c right under CPU directory does not work. Now a new demand is coming. PowerPC folks want to use asm-offsets. But no PowerPC boards have SoC directory. It seems inconsistent that some boards add asm-offsets.c to SoC directoreis and some to CPU directories. It looks more reasonable to put asm-offsets.c under arch/$(ARCH)/lib. This commit merges asm-offsets.c under SoC directories into arch/$(ARCH)/lib/asm-offsets.c. By the way, I doubt the necessity of some entries in asm-offsets.c. I am leaving refactoring to the board maintainers. Please check "TODO" in the comment blocks in arch/{arm,nds32}/lib/asm-offsets.c. Signed-off-by: Masahiro Yamada Cc: Yuantian Tang

ARM: mx25: convert to common timer code

2013-11-04T16:09:34Z

Convert mx25 to use the commmon timer code. Signed-off-by: Rob Herring

arm926ejs: convert makefiles to Kbuild style

2013-10-31T16:53:39Z

Note1: In arch/arm/cpu/arm926ejs/spear/Makefile START := start.o was changed extra-$(CONFIG_SPL_BUILD) := start.o because spear/start.o is only used for SPL. Note2: START := start.o was missing from arch/arm/cpu/arm926ejs/mxs/Makefile. This commit simply adds extra-$(CONFIG_SPL_BUILD) := start.o Signed-off-by: Masahiro Yamada

Add GPL-2.0+ SPDX-License-Identifier to source files

2013-07-24T13:44:38Z

Signed-off-by: Wolfgang Denk [trini: Fixup common/cmd_io.c] Signed-off-by: Tom Rini

imx: mx25: Remove legacy iomux support

2013-05-05T15:55:03Z

Legacy iomux support is no longer needed now that all boards have been converted to iomux-v3. Signed-off-by: Benoît Thébaudeau

ppc: arm: Move sdhc_clk into arch_global_data

2013-02-04T14:05:44Z

This is used by both powerpc and arm, but I think it still qualifies as architecture-specific. Signed-off-by: Simon Glass

arm: Move lastinc to arch_global_data

2013-02-01T20:07:50Z

Move this field into arch_global_data and tidy up. Signed-off-by: Simon Glass