u-boot.git/arch/arm/cpu/arm926ejs/mx27, branch v2016.09

mx27: 16-bit wide watchdog registers

2016-03-25T13:03:28Z

Make the watchdog registers 16-bit wide, as they are according to TRM. Signed-off-by: Leonid Iziumtsev Reviewed-by: Fabio Estevam

imx: mx27 implement get_cpu_rev

2015-09-02T13:29:14Z

Implement get_cpu_rev to support runtime check using is_cpu_type. Signed-off-by: Peng Fan Cc: Stefano Babic Reviewed-by: Stefano Babic

imx: fix exception vectors relocation in imx27

2014-11-20T09:13:54Z

Commit 3ff46cc4 fixed exception vectors setting in the general ARM case, by either copying the exception and indirect vector tables to normal (0x00000000) or high (0xFFFF0000) vectors address, or setting VBAR to U-Boot's base if applicable. i.MX27 SoC is ARM926E-JS, thus has only normal and high options, but does not provide RAM at 0xFFFF0000 and has only ROM at 0x00000000; it is therefore not possible to move or change its exception vectors. Besides, i.MX27 ROM code does provide an indirect vectors table but at a non-standard address and with the reset and reserved vectors missing. Turn the current vector relocation code into a weak routine called after relocate_code from crt0, and add strong version for i.MX27. Series-Cc: Heiko Schocher Signed-off-by: Albert ARIBAUD Reviewed-by: Stefano Babic Tested-by: Stefano Babic Tested-by: Philippe Reynes Tested-by: Philippe Reynes

kbuild: move asm-offsets.c from SoC directory to arch/$(ARCH)/lib

2014-03-28T19:06:29Z

U-Boot has supported two kinds of asm-offsets.h. One is generic for all architectures and its source is located at ./lib/asm-offsets.c. The other is SoC specific and its source is under SoC directory. The problem here is that only boards with SoC directory can use the asm-offsets infrastructure. Putting asm-offsets.c right under CPU directory does not work. Now a new demand is coming. PowerPC folks want to use asm-offsets. But no PowerPC boards have SoC directory. It seems inconsistent that some boards add asm-offsets.c to SoC directoreis and some to CPU directories. It looks more reasonable to put asm-offsets.c under arch/$(ARCH)/lib. This commit merges asm-offsets.c under SoC directories into arch/$(ARCH)/lib/asm-offsets.c. By the way, I doubt the necessity of some entries in asm-offsets.c. I am leaving refactoring to the board maintainers. Please check "TODO" in the comment blocks in arch/{arm,nds32}/lib/asm-offsets.c. Signed-off-by: Masahiro Yamada Cc: Yuantian Tang

arm926ejs: convert makefiles to Kbuild style

2013-10-31T16:53:39Z

Note1: In arch/arm/cpu/arm926ejs/spear/Makefile START := start.o was changed extra-$(CONFIG_SPL_BUILD) := start.o because spear/start.o is only used for SPL. Note2: START := start.o was missing from arch/arm/cpu/arm926ejs/mxs/Makefile. This commit simply adds extra-$(CONFIG_SPL_BUILD) := start.o Signed-off-by: Masahiro Yamada

mx27: add missing constant for mx27

2013-09-10T17:12:55Z

Add some missing constant (chip select, ...) Signed-off-by: Philippe Reynes Signed-off-by: Eric Jarrige Acked-by: Stefano Babic

Add GPL-2.0+ SPDX-License-Identifier to source files

2013-07-24T13:44:38Z

Signed-off-by: Wolfgang Denk [trini: Fixup common/cmd_io.c] Signed-off-by: Tom Rini

mx27: add i2c clock

2013-06-26T15:34:21Z

Signed-off-by: Eric Jarrige Signed-off-by: Philippe Reynes

mx27: add function enable_caches

2013-06-26T15:34:21Z

Signed-off-by: Philippe Reynes

arm: Move lastinc to arch_global_data

2013-02-01T20:07:50Z

Move this field into arch_global_data and tidy up. Signed-off-by: Simon Glass