u-boot.git/arch/arm/cpu/armv7/mx5/lowlevel_init.S, branch v2011.09

Makefile : fix generation of cpu related asm-offsets.h

2011-09-07T19:41:27Z

commit 0edf8b5b2fa0d210ebc4d6da0fd1aceeb7e44e47 breaks building on a different directory with the O= parameter. The patch wil fix this issue, generating always asm-offsets.h before the other targets. Signed-off-by: Stefano Babic CC: Matthias Weisser CC: Wolfgang Denk

ARM: MX51: PLL errata workaround

2011-09-04T09:36:11Z

This is a port of the official PLL errata workaround from Freescale to mainline u-boot. The PLL's in the i.MX51 processor can go out of lock due to a metastable condition in an analog flip-flop when used at high frequencies. This workaround implements an undocumented feature in the PLL (dither mode), which causes the effect of this failure to be much lower (in terms of frequency deviation), avoiding system failure, or at least decreasing the likelihood of system failure. Signed-off-by: David Jander

ARM: MX5: Fix broken leftover TO-2 errata workaround

2011-07-18T12:41:48Z

This check was broken. r3 does not contain the silicon revision anymore, so we need to reload it. Also, this errata only applies to i.MX51. Signed-off-by: David Jander Acked-by: Stefano Babic

MX5: Add initial support for MX53 processor

2011-02-01T23:54:41Z

Add initial support for Freescale MX53 processor, - Add the iomux support and the pin definition, - Add the regs definition, clean up some unused def from mx51, - Add the low level init support, make use the freq input of setup_pll macro Signed-off-by: Jason Liu

MX5: Remove dead code with ENABLE_IMPRECISE_ABORT

2010-10-19T10:28:08Z

This code section is dead due to we never define ENABLE_IMPRECISE_ABORT for MX5 Signed-off-by: Jason Liu

MX5: rename mx51 to mx5

2010-10-18T08:43:19Z

Rename mx51 to mx5 in order to support more mx51 like-style SOCs such as MX53 and the followings. Signed-off-by: Jason Liu