u-boot.git/arch/arm/cpu/armv7/mx5, branch master

imx: reorganize IMX code as other SOCs

2017-07-12T08:17:44+00:00

Change is consistent with other SOCs and it is in preparation
for adding SOMs. SOC's related files are moved from cpu/ to
mach-imx/.

This change is also coherent with the structure in kernel.

Signed-off-by: Stefano Babic 

CC: Fabio Estevam 
CC: Akshay Bhat 
CC: Ken Lin 
CC: Marek Vasut 
CC: Heiko Schocher 
CC: "Sébastien Szymanski" 
CC: Christian Gmeiner 
CC: Stefan Roese 
CC: Patrick Bruenn 
CC: Troy Kisky 
CC: Nikita Kiryanov 
CC: Otavio Salvador 
CC: "Eric Bénard" 
CC: Jagan Teki 
CC: Ye Li 
CC: Peng Fan 
CC: Adrian Alonso 
CC: Alison Wang 
CC: Tim Harvey 
CC: Martin Donnelly 
CC: Marcin Niestroj 
CC: Lukasz Majewski 
CC: Adam Ford 
CC: "Albert ARIBAUD (3ADEV)" 
CC: Boris Brezillon 
CC: Soeren Moch 
CC: Richard Hu 
CC: Wig Cheng 
CC: Vanessa Maegima 
CC: Max Krummenacher 
CC: Stefan Agner 
CC: Markus Niebel 
CC: Breno Lima 
CC: Francesco Montefoschi 
CC: Jaehoon Chung 
CC: Scott Wood 
CC: Joe Hershberger 
CC: Anatolij Gustschin 
CC: Simon Glass 
CC: "Andrew F. Davis" 
CC: "Łukasz Majewski" 
CC: Patrice Chotard 
CC: Nobuhiro Iwamatsu 
CC: Hans de Goede 
CC: Masahiro Yamada 
CC: Stephen Warren 
CC: Andre Przywara 
CC: "Álvaro Fernández Rojas" 
CC: York Sun 
CC: Xiaoliang Yang 
CC: Chen-Yu Tsai 
CC: George McCollister 
CC: Sven Ebenfeld 
CC: Filip Brozovic 
CC: Petr Kulhavy 
CC: Eric Nelson 
CC: Bai Ping 
CC: Anson Huang 
CC: Sanchayan Maity 
CC: Lokesh Vutla 
CC: Patrick Delaunay 
CC: Gary Bisson 
CC: Alexander Graf 
CC: u-boot@lists.denx.de
Reviewed-by: Fabio Estevam 
Reviewed-by: Christian Gmeiner

arm: Re-sync ARCH_MX5 / MX51 / MX53 CONFIG options

2017-04-30T14:29:38+00:00

A few boards had not been fully re-synced with CONFIG_ARCH_MX5 / CONFIG_MX51 /
CONFIG_MX53 being in Kconfig.  Do so now.

Signed-off-by: Tom Rini

Kconfig: Migrate BOARD_LATE_INIT to a select

2017-01-24T15:35:54+00:00

This option should not really be user selectable.  Note that on PowerPC
we currently only need BOARD_LATE_INIT when CHAIN_OF_TRUST is enabled so be
conditional on that.

Signed-off-by: Tom Rini 
Acked-by: Masahiro Yamada  (for UniPhier)

arm: imx: add i.MX53 Beckhoff CX9020 Embedded PC

2016-12-16T11:57:12+00:00

Add CX9020 board based on mx53loco.
Add simplified imx53 base device tree from kernel v4.8-rc8, to reuse
serial_mxc with DTE and prepare for device tree migration of other
functions and imx53 devices.

The CX9020 differs from i.MX53 Quick Start Board by:
- use uart2 instead of uart1
- DVI-D connector instead of VGA
- no audio
- CCAT FPGA connected to emi
- enable rtc

Signed-off-by: Patrick Bruenn

treewide: replace #include with

2016-09-23T21:55:42+00:00

Now, arch/${ARCH}/include/asm/errno.h and include/linux/errno.h have
the same content.  (both just wrap )

Replace all include directives for  with .

Signed-off-by: Masahiro Yamada 
[trini: Fixup include/clk.]
Signed-off-by: Tom Rini

arch: Make board selection choices optional

2015-05-12T22:10:02+00:00

By making the board selections optional, every defconfig will include
the board selection when running savedefconfig so if a new board is
added to the top of the list of choices the former top's defconfig will
still be correct.

Signed-off-by: Joe Hershberger 
Cc: Masahiro Yamada 
Acked-by: Stephen Warren 
Cc: Tom Rini

ARM: mx5: add support for USB armory board

2015-04-09T07:14:12+00:00

Add support for Inverse Path USB armory board, an open source
flash-drive sized computer based on Freescale i.MX53 SoC.

http://inversepath.com/usbarmory

Signed-off-by: Andrej Rosano 
Cc: Stefano Babic 
Cc: Chris Kuethe 
Cc: Fabio Estevam 
Cc: Vagrant Cascadian 
Tested-By: Vagrant Cascadian 
Tested-by: Chris Kuethe

ARM: mx5: move to a standard arch/board approach

2015-04-09T07:13:54+00:00

Move the MX5 based boards to arch/arm/cpu/armv7/mx5, following the
commit: 89ebc82137bebb11a8191f8b9cbf08f2533ae8bc

Signed-off-by: Andrej Rosano 
Cc: Stefano Babic 
Cc: Vagrant Cascadian 
Tested-by: Chris Kuethe

imx: consolidate set_chipselect_size function

2014-11-20T09:30:19+00:00

Move MX5 specific set_chipselect_size function into generic i.MX part,
such that MX6 based boards are able to use this function as well.

While doing this the iomuxc gpr member needed to be consolidated between
MX5 and MX6.

Signed-off-by: Fabio Estevam

kbuild: move asm-offsets.c from SoC directory to arch/$(ARCH)/lib

2014-03-28T19:06:29+00:00

U-Boot has supported two kinds of asm-offsets.h.

One is generic for all architectures and its source is located at
./lib/asm-offsets.c.

The other is SoC specific and its source is under SoC directory.
The problem here is that only boards with SoC directory can use
the asm-offsets infrastructure.
Putting asm-offsets.c right under CPU directory does not work.

Now a new demand is coming. PowerPC folks want to use asm-offsets.
But no PowerPC boards have SoC directory.

It seems inconsistent that some boards add asm-offsets.c to SoC
directoreis and some to CPU directories.
It looks more reasonable to put asm-offsets.c under arch/$(ARCH)/lib.

This commit merges asm-offsets.c under SoC directories into
arch/$(ARCH)/lib/asm-offsets.c.

By the way, I doubt the necessity of some entries in asm-offsets.c.
I am leaving refactoring to the board maintainers.
Please check "TODO" in the comment blocks in
arch/{arm,nds32}/lib/asm-offsets.c.

Signed-off-by: Masahiro Yamada 
Cc: Yuantian Tang