u-boot.git/arch/arm/cpu/armv7/mx6/clock.c, branch v2016.01

imx: mx6: add missing return value

2015-12-07T13:59:25Z

cc: Peng Fan Signed-off-by: Jeroen Hofstee Reviewed-by: Peng Fan Reviewed-by: Stefano Babic

mx6: clock: Modify GPMI clock to support mx6sx

2015-11-25T10:40:04Z

On mx6sx, the CCM register bits for GPMI are different as other mx6 platforms. Modify the GPMI clock function to support mx6sx. Signed-off-by: Ye.Li

imx: mx6: add clock api for lcdif

2015-11-12T16:40:53Z

Implement mxs_set_lcdclk, enable_lcdif_clock and enable_pll_video. The three API can be used to configure lcdif related clock when CONFIG_VIDEO_MXS enabled. Signed-off-by: Peng Fan Cc: Stefano Babic

imx: mx6: correct enable_fec_anatop_clock

2015-10-02T08:42:31Z

We should follow 'read->set/clr bit->write' flow for enable_fec_anatop_clock, otherwise we may overridden configuration before enable_fec_anatop_clock. Signed-off-by: Peng Fan Cc: Stefano Babic Cc: Cc: Fabio Estevam

imx: clock support enet2 anatop clock support

2015-09-02T13:29:14Z

To i.MX6SX/UL, two ethernet interfaces are supported. Add ENET2 clock support: 1. Introduce a new input parameter "fec_id", only 0 and 1 are allowed. To value 1, only i.MX6SX/UL can pass the check. 2. Modify board code who use this api to follow new api prototype. Signed-off-by: Peng Fan Cc: Heiko Schocher Cc: Fabio Estevam Cc: Stefan Roese Cc: Nikolaos Pasaloukos Cc: Stefano Babic Reviewed-by: Stefan Roese

imx:mx6ul add clock support

2015-08-02T09:05:07Z

1. Add enet, uart, i2c, ipg clock support for i.MX6UL. 2. Correct get_periph_clk, it should account for MXC_CCM_CBCDR_PERIPH_CLK2_PODF_MASK. 3. Refactor get_mmdc_ch0_clk to make all i.MX6 share one function, but not use 'ifdef'. 4. Use CONFIG_FSL_QSPI for enable_qspi_clk, but not #ifdef CONFIG_MX6SX. 5. Use CONFIG_PCIE_IMX for pcie clock settings, use CONFIG_CMD_SATA for sata clock settings. In this way, we not need "#if defined(CONFIG_MX6Q) || defined....", only need one CONFIG_PCIE_IMX in header file. Signed-off-by: Ye.Li Signed-off-by: Peng Fan

imx: mx6qp Enable PRG clock for IPU

2015-08-02T08:46:34Z

The i.MX6DQP has a PRG module, need to enable its clock for using IPU. Signed-off-by: Peng Fan Signed-off-by: Brown Oliver Signed-off-by: Ye.Li Reviewed-by: Fabio Estevam Acked-by: Stefano Babic

imx: mx6: ccm: Change the clock settings for i.MX6QP

2015-08-02T08:43:45Z

Since i.MX6QP changes some CCM registers, so modify the clocks settings to follow the hardware changes. In c files, use runtime check and discard #ifdef. Signed-off-by: Peng Fan Signed-off-by: Ye.Li Reviewed-by: Fabio Estevam Acked-by: Stefano Babic

imx: mx6 add i2c4 clock support for i.MX6SX

2015-07-10T07:36:16Z

Add I2C4 clock support for i.MX6SX. Since we use runtime check, but not macro, we need to remove `#ifdef ..` in crm_regs.h, or gcc will fail to compile the code succesfully. Making the macros only for i.MX6SX open to other i.MX6x maybe not a good choice, but we have runtime check. Signed-off-by: Peng Fan

imx: mx6 remove duplicated enable_cspi_clock

2015-07-10T07:35:53Z

enable_spi_clock does the same thing with enable_cspi_clock, so remove enable_cspi_clock. Remove enable_cspi_clock prototype in header file convert cm_fx6/spl.c to use enable_spi_clk Signed-off-by: Peng Fan Acked-by: Stefano Babic