u-boot.git/arch/arm/cpu/armv7/mx6, branch v2012.04

i.MX6: implement enable_caches()

2012-04-16T12:53:58Z

disabled by default until drivers are fixed Signed-off-by: Eric Nelson Acked-by: Marek Vasut

mx6: Read silicon revision from register

2012-03-27T07:41:16Z

Instead of hardcoding the mx6 silicon revision, read it in run-time. Also, besides the silicon version print the mx6 variant type: quad,dual/solo or solo-lite. Tested on a mx6qsabrelite, where it shows: CPU: Freescale i.MX6Q rev1.0 at 792 MHz Signed-off-by: Fabio Estevam Acked-by: Stefano Babic Acked-by: Jason Liu

usb/ehci: Add USB support for the MX6Q

2012-03-26T21:09:23Z

Currently, only USB Host 1 is supported. Cc: Remy Bohmer Signed-off-by: Wolfgang Grandegger

imx: mx6q: add aipstz init for off platform periph

2012-01-16T07:40:10Z

Init peripheral access control register of AIPSTZ OPACRx: Buffer Writes(BW): 0 -> not bufferable, Supervisor Protect(SP): 0 -> not require supervisor privilege level for accesses. Write Protect(WP): 0 -> allows write accesses. Trusted Protect(TP): 0 -> allows unstrusted master Signed-off-by: Jason Liu Cc: Stefano Babic

i.mx6:imx6q: allign MAC address with burned-in ordering

2012-01-16T07:40:09Z

For the i.mx6q, the burned-in MAC address will be the following odering, fuse: 0x620[7:0] MAC_ADDR[7:0] ---> mac[5] fuse: 0x620[15:8] MAC_ADDR[15:8] ---> mac[4] fuse: 0x620[23:16] MAC_ADDR[23:16] ---> mac[3] fuse: 0x620[31:24] MAC_ADDR[31:24] ---> mac[2] fuse: 0x630[7:0] MAC_ADDR[39:32] ---> mac[1] fuse: 0x630[15:8] MAC_ADDR[47:40] ---> mac[0] This patch also fix the error caculation for the fuse bank[0] address Signed-off-by: Jason Liu Cc: Stefano Babic

net: imx: Add multi-FEC support for imx_get_mac_from_fuse

2012-01-16T07:40:09Z

Add multi-FEC support for imx_get_mac_from_fuse by passing dev_id as a parameter. This feature is important on mx28 SoC for example that has two FEC ports. Cc: Ben Warren Signed-off-by: Fabio Estevam Acked-by: Stefano Babic

i.mx: i.mx6q: Add the enet clock function

2012-01-16T07:40:08Z

Cc: Stefano Babic Signed-off-by: Jason Liu Acked-by: Stefano Babic

i.mx: add the initial support for freescale i.MX6Q processor

2011-12-09T16:30:10Z

i.MX6Q is freescale quad core processors with ARM cortex_a9 complex. This patch is to add the initial support for this processor. Signed-off-by: Jason Liu Cc:Stefano Babic