u-boot.git/arch/arm/cpu/armv7/mx6, branch v2012.10

imx-common/cmd_bmode.c: add imx bmode (bootmode) command

2012-09-01T12:58:26Z

This is useful for forcing the ROM's usb downloader to activate upon a watchdog reset. Or, you can boot from either SD Card. Currently, support added for MX53 and MX6Q Signed-off-by: Troy Kisky Note: MX53 support untested. Acked-by: Stefano Babic

imx-common: add i2c.c for bus recovery support

2012-07-31T06:00:57Z

Signed-off-by: Troy Kisky

i.mx: iomux-v3.c: move to imx-common directory

2012-07-31T06:00:32Z

Signed-off-by: Troy Kisky

i.mx: iomux-v3.h: move to imx-common include directory

2012-07-31T06:00:19Z

Signed-off-by: Troy Kisky

iomux-v3: remove include of mx6x_pins.h

2012-07-31T05:59:56Z

This include is not needed. Signed-off-by: Troy Kisky Acked-by: Jason Liu

No need to define CONFIG_ARCH_CPU_INIT.

2012-07-07T12:07:44Z

All mx6 based boards should use arch_cpu_init(). Signed-off-by: Fabio Estevam Acked-by: Marek Vasut

i.MX6: add enable_sata_clock()

2012-05-15T06:31:33Z

Signed-off-by: Eric Nelson Signed-off-by: Stefano Babic

i.MX6: Add ANATOP regulator init

2012-05-15T06:31:33Z

Init the core regulator voltage to 1.2V. This is required for the correct functioning of the GPU and when the ARM LDO is set to 1.225V. This is a workaround to fix some memory clock jitter. Note: This should be but can't be done in the DCD. The bootloader prevents access to the ANATOP registers. Signed-off-by: Dirk Behme CC: Jason Chen CC: Jason Liu CC: Ranjani Vaidyanathan CC: Stefano Babic CC: Fabio Estevam

imx-common: Factor out get_ahb_clk()

2012-05-15T06:31:32Z

get_ahb_clk() is a common function between mx5 and mx6. Place it into imx-common directory. Cc: Dirk Behme Signed-off-by: Fabio Estevam

armv7: add appropriate headers for assembly functions

2012-05-15T06:31:26Z

Use ENTRY and ENDPROC with assembly functions to ensure necessary assembler directives for all functions. Signed-off-by: Aneesh V Acked-by: Mike Frysinger