u-boot.git/arch/arm/cpu/armv7/mx6, branch v2016.03

imx: mx6: implement functions to boot auxiliary core

2016-02-21T10:46:26Z

Implement arch_auxiliary_core_up and arch_auxiliary_core_check_up. arch_auxiliary_core_check_up is used to check whether M4 is running or not. arch_auxiliary_core_up is to boot M4 core, the m4 core will use the pc and stack which is set in arch_auxiliary_core_up to set R15 and R13 register and boot. Signed-off-by: Ye.Li Signed-off-by: Peng Fan

imx: mx6: Implement mmc_get_env_part

2016-02-21T10:31:44Z

commit 216d286c7e3d3d83d4d8ccaf0415192e1b1040c0 [imx: mx6: implement mmc_get_env_dev] introduced selection of the environment device according to the boot device when booting from SD/MMC. Extend this functionality for also selecting the device partition. Signed-off-by: Soeren Moch

imx: mx6: implement mmc_get_env_dev

2016-02-04T09:13:49Z

Implement mmc_get_env_dev, devno can be got from smbr1 of SRC. Introduce a weak function board_mmc_get_env_dev, different boards can implement it according to different sdhc controllers that used by the board. Signed-off-by: Peng Fan Cc: Stefano Babic

imx: mx6ul/sx: Fix issue in LCDIF clock dividers calculation

2016-02-02T20:25:50Z

The checking with max frequency supported is not correct, because the temp is calculated by max pre and post dividers. We can decrease any divider to meet the max frequency limitation. Actually, the calculation below the codes is doing this way to find best pre and post dividers. Signed-off-by: Ye Li Reviewed-by: Stefano Babic

imx: mx6sx: Fix issue in LCDIF clock enablement

2016-02-02T20:25:05Z

Wrong checking for the base_addr paramter with LCDIF1 and LCDIF2. Always enter the -EINVAL return. Signed-off-by: Ye Li Reviewed-by: Stefano Babic

imx: mx6sxsabreauto: Add support for mx6sx SABREAUTO board

2016-02-02T20:04:21Z

Initial version for mx6sx SABREAUTO board support with features: PMIC, QSPI, NAND flash, SD/MMC, USB, Ethernet, I2C, IO Expander. Signed-off-by: Ye Li

mx6: soc: Add ENET2 mac address support

2016-02-02T20:03:59Z

The i.MX6SX and i.MX6UL has two ENET controllers, add support for reading MAC address from fuse for ENET2. Signed-off-by: Ye Li

arm: imx6: Add DDR3 calibration code for MX6 Q/D/DL

2016-02-02T19:58:46Z

Add DDR3 calibration code for i.MX6Q, i.MX6D and i.MX6DL. This code fine-tunes the behavior of the MMDC controller in order to improve the signal integrity and memory stability. Signed-off-by: Marek Vasut Cc: Stefano Babic

imx: mx6ul/sx: fix mmdc_ch0 clk calculation

2016-01-24T11:13:21Z

Check "Figure 19-5. BUS clock generation" of i.MX 6SoloX Applications Processor Reference Manual and "Figure 18-5. BUS clock generation" of i.MX 6UltraLite Applications Processor Reference Manual. If mmdc clk sources from pll4_main_clk(pll_audio), the calculation is wrong. Fix mmdc_ch0 clk calculation. Also add PLL_AUDIO/VIDEO support for decode_pll. Signed-off-by: Peng Fan Cc: Stefano Babic

imx: ddr: drop duplicated debug info

2016-01-03T14:19:58Z

Drop duplicated debug info for tcl. Signed-off-by: Peng Fan Cc: Stefano Babic