u-boot.git/arch/arm/cpu, branch v2016.03-rc2

arm: build some file(s) as ARM mode only

2016-02-15T17:04:46Z

Signed-off-by: David Müller

OMAP3_LOGIC: Setup defconfig to enable SPL and NAND booting

2016-02-08T15:10:39Z

The defconfig patch will enable the the SPL and NAND settings. The update to Kconfig will allow the SPL to configured in and built. Signed-off-by: Derald D. Woods Signed-off-by: Adam Ford Reviewed-by: Tom Rini

Use correct spelling of "U-Boot"

2016-02-06T11:00:59Z

Correct spelling of "U-Boot" shall be used in all written text (documentation, comments in source files etc.). Signed-off-by: Bin Meng Reviewed-by: Heiko Schocher Reviewed-by: Simon Glass Reviewed-by: Minkyu Kang

imx: mx6: implement mmc_get_env_dev

2016-02-04T09:13:49Z

Implement mmc_get_env_dev, devno can be got from smbr1 of SRC. Introduce a weak function board_mmc_get_env_dev, different boards can implement it according to different sdhc controllers that used by the board. Signed-off-by: Peng Fan Cc: Stefano Babic

imx: mx7dsabresd: move mmc_get_env_devno to soc code

2016-02-04T09:13:45Z

Move mmc_get_env_devno to soc.c and rename to mmc_get_env_dev to match the one in common/env_mmc.c. Introduce a weak function board_mmc_get_env_dev. Different boards can implement this according to sdhc controller which is used by the board. Signed-off-by: Peng Fan Cc: Stefano Babic

imx: mx6ul/sx: Fix issue in LCDIF clock dividers calculation

2016-02-02T20:25:50Z

The checking with max frequency supported is not correct, because the temp is calculated by max pre and post dividers. We can decrease any divider to meet the max frequency limitation. Actually, the calculation below the codes is doing this way to find best pre and post dividers. Signed-off-by: Ye Li Reviewed-by: Stefano Babic

imx: mx6sx: Fix issue in LCDIF clock enablement

2016-02-02T20:25:05Z

Wrong checking for the base_addr paramter with LCDIF1 and LCDIF2. Always enter the -EINVAL return. Signed-off-by: Ye Li Reviewed-by: Stefano Babic

imx: mx6sxsabreauto: Add support for mx6sx SABREAUTO board

2016-02-02T20:04:21Z

Initial version for mx6sx SABREAUTO board support with features: PMIC, QSPI, NAND flash, SD/MMC, USB, Ethernet, I2C, IO Expander. Signed-off-by: Ye Li

mx6: soc: Add ENET2 mac address support

2016-02-02T20:03:59Z

The i.MX6SX and i.MX6UL has two ENET controllers, add support for reading MAC address from fuse for ENET2. Signed-off-by: Ye Li

arm: imx6: Add DDR3 calibration code for MX6 Q/D/DL

2016-02-02T19:58:46Z

Add DDR3 calibration code for i.MX6Q, i.MX6D and i.MX6DL. This code fine-tunes the behavior of the MMDC controller in order to improve the signal integrity and memory stability. Signed-off-by: Marek Vasut Cc: Stefano Babic