u-boot.git/arch/arm/imx-common/cpu.c, branch v2016.09

imx: imx-common: print i.MX 7 SoC names consistently

2016-05-17T15:52:20Z

According to the product website, the full names are i.MX 7Solo and i.MX 7Dual, whereas the short form is i.MX7S and i.MX7D. Be consistent and print the short form for both supported i.MX 7 SoCs. Signed-off-by: Stefan Agner Reviewed-by: Fabio Estevam

mx7: Distinguish between dual and solo versions

2016-03-09T11:50:39Z

Read the number of cores in the fuses to distinguish between the dual and solo versions. Tested on a mx7d sabresd and on a mx7solo warp7. Signed-off-by: Fabio Estevam Reviewed-by: Peng Fan

imx: imx-common: power down lcdif before boot os

2015-11-12T16:40:54Z

Need to call lcdif_power_down to make lcdif in initial state before kernel boot. Similar issue for uboot reset with lcdif enabled, system will hang after serveral times resetting. Need to let lcdif initial state to make all go well. Signed-off-by: Peng Fan Cc: Stefano Babic Cc: Eric Nelson Cc: Nikita Kiryanov Cc: Tim Harvey Cc: Fabio Estevam

imx-common: cpu: Do not print on invalid temperature

2015-09-13T08:50:55Z

It is not very useful to have the message below on every boot (especially when we are using early silicon): U-Boot 2015.10-rc2-23945-g37cf215 (Sep 08 2015 - 14:12:14 -0300) CPU: Freescale i.MX6UL rev1.0 792 MHz (running at 396 MHz) CPU: Commercial temperature grade (0C to 95C)CPU: Thermal invalid data, fuse: 0x0 - invalid sensor device , so turn the error message into debug level. Signed-off-by: Fabio Estevam

imx: imx7d: add imx-common cpu support for imx7d

2015-09-13T08:11:54Z

Add imx-common cpu support for imx7d SoC - Update reset_cause for imx7d - Enable watchdog driver built for imx7d Signed-off-by: Adrian Alonso Signed-off-by: Peng Fan

thermal: imx_thermal: rework driver to be reused

2015-09-13T08:11:53Z

Rework imx_thermal driver to be used across i.MX processor that support thermal sensor Signed-off-by: Adrian Alonso Signed-off-by: Peng Fan

imx: mx6ul: Add i.MX6UL CPU type

2015-08-02T09:05:06Z

Add MXC_CPU_MX6UL for i.MX6UL CPU type which is got at runtime from DIGPROG register. But the value has been occupied by MXC_CPU_MX6D which is not real id from DIGPROG register, so change i.MX6D to value 0x67 which was not occupied. Signed-off-by: Peng Fan Signed-off-by: Ye.Li

imx: add cpu type for i.MX6QP/DP

2015-08-02T08:42:48Z

Add cpu type for i.MX6QP/DP. This patch also fix is_mx6dqp(), since get_cpu_rev can return MXC_CPU_MX6QP and MXC_CPU_MX6DP, we should use: (is_cpu_type(MXC_CPU_MX6QP) || is_cpu_type(MXC_CPU_MX6DP)). Signed-off-by: Peng Fan Acked-by: Stefano Babic

imx: drop warning: unused variable 'max_freq'

2015-06-08T06:55:08Z

max_freq in print_cpuinfo is used only with imx6. Signed-off-by: Stefano Babic

Revert "imx: drop warning: unused variable 'max_freq'"

2015-05-28T10:01:44Z

This reverts commit a0117a5e416629932becf079589f5e1859eab90a. Signed-off-by: Stefano Babic