u-boot.git/arch/arm/imx-common, branch master

imx: reorganize IMX code as other SOCs

2017-07-12T08:17:44+00:00

Change is consistent with other SOCs and it is in preparation
for adding SOMs. SOC's related files are moved from cpu/ to
mach-imx/.

This change is also coherent with the structure in kernel.

Signed-off-by: Stefano Babic 

CC: Fabio Estevam 
CC: Akshay Bhat 
CC: Ken Lin 
CC: Marek Vasut 
CC: Heiko Schocher 
CC: "Sébastien Szymanski" 
CC: Christian Gmeiner 
CC: Stefan Roese 
CC: Patrick Bruenn 
CC: Troy Kisky 
CC: Nikita Kiryanov 
CC: Otavio Salvador 
CC: "Eric Bénard" 
CC: Jagan Teki 
CC: Ye Li 
CC: Peng Fan 
CC: Adrian Alonso 
CC: Alison Wang 
CC: Tim Harvey 
CC: Martin Donnelly 
CC: Marcin Niestroj 
CC: Lukasz Majewski 
CC: Adam Ford 
CC: "Albert ARIBAUD (3ADEV)" 
CC: Boris Brezillon 
CC: Soeren Moch 
CC: Richard Hu 
CC: Wig Cheng 
CC: Vanessa Maegima 
CC: Max Krummenacher 
CC: Stefan Agner 
CC: Markus Niebel 
CC: Breno Lima 
CC: Francesco Montefoschi 
CC: Jaehoon Chung 
CC: Scott Wood 
CC: Joe Hershberger 
CC: Anatolij Gustschin 
CC: Simon Glass 
CC: "Andrew F. Davis" 
CC: "Łukasz Majewski" 
CC: Patrice Chotard 
CC: Nobuhiro Iwamatsu 
CC: Hans de Goede 
CC: Masahiro Yamada 
CC: Stephen Warren 
CC: Andre Przywara 
CC: "Álvaro Fernández Rojas" 
CC: York Sun 
CC: Xiaoliang Yang 
CC: Chen-Yu Tsai 
CC: George McCollister 
CC: Sven Ebenfeld 
CC: Filip Brozovic 
CC: Petr Kulhavy 
CC: Eric Nelson 
CC: Bai Ping 
CC: Anson Huang 
CC: Sanchayan Maity 
CC: Lokesh Vutla 
CC: Patrick Delaunay 
CC: Gary Bisson 
CC: Alexander Graf 
CC: u-boot@lists.denx.de
Reviewed-by: Fabio Estevam 
Reviewed-by: Christian Gmeiner

Kconfig: Add CONFIG_SATA to enable SATA

2017-07-11T16:08:19+00:00

At present CONFIG_CMD_SATA enables the 'sata' command which also brings
in SATA support. Some boards may wish to enable SATA without the command.
Add a separate CONFIG to permit this.

Signed-off-by: Simon Glass 
Reviewed-by: Bin Meng

drivers: pci: imx: add imx_pcie_remove function

2017-05-31T08:09:03+00:00

There is no dedicated reset signal wired up for the MX6QDL thus if the
bootloader enables the link we need some special handling to get the core
back into a state where it is safe to touch it for configuration.

While there has been some special handling in the Linux kernel to do this,
it was removed in 4.11 thus we need to do it properly in the bootloader
and therefore without this if you enable PCI in the bootloader you will hang
while booting the 4.11 kernel.

This puts the PCIe controller back into a safe state for the kernel driver
before launching the kernel.

Signed-off-by: Tim Harvey 
Reviewed-by: Fabio Estevam 
Tested-by: Peter Senna Tschudin

Convert CONFIG_CMD_HDMIDETECT to Kconfig

2017-05-22T16:45:22+00:00

This converts the following to Kconfig:
   CONFIG_CMD_HDMIDETECT

Note that we cannot do 'default y if VIDEO' because this option is only
enabled for a small subset of mx6 boards. Also this command is is not a
great implementation (it doesn't use driver model).

Signed-off-by: Simon Glass 
Reviewed-by: Tom Rini

imx-common: rdc-sema: correct return value

2017-05-18T09:23:31+00:00

When unlock, if caller is not the sema owner,
return -EACCES, not 1.

Signed-off-by: Peng Fan 
Cc: Stefano Babic

imx-common: timer: clean up

2017-05-18T09:23:31+00:00

Drop the unneeded code. lib/time.c use timebase_l/h.

Signed-off-by: Peng Fan 
Cc: Stefano Babic 
Reviewed-by: Stefano Babic

Convert CONFIG_CMD_DEKBLOB to Kconfig

2017-04-30T17:41:00+00:00

This converts the following to Kconfig:
   CONFIG_CMD_DEKBLOB

Note: This option does not seem to actually be enabled by any board.

Signed-off-by: Simon Glass 
[trini: imply under SECURE_BOOT for mx5/6/7]
Signed-off-by: Tom Rini

Convert CONFIG_CMD_BMODE to Kconfig

2017-04-30T14:30:06+00:00

This converts the following to Kconfig:
   CONFIG_CMD_BMODE

Signed-off-by: Simon Glass 
[trini: Make this default y and depend on mx5/6/7]
Signed-off-by: Tom Rini

imx6: Add src_base structure define macro

2017-03-17T08:27:08+00:00

Instead of initializing 'struct src' to SRC_BASE_ADDR on
every function better to have global define macro.

Reviewed by: Stefano Babic 
Signed-off-by: Jagan Teki

imx: Use IMX6_BMODE_* macros instead of numericals

2017-03-17T08:27:08+00:00

Use meaningful macros IMX6_BMODE_*, instead of numerical
number in boot mode detection code.

Cc: Tim Harvey 
Acked-by: Stefano Babic 
Signed-off-by: Jagan Teki