u-boot.git/arch/arm/include/asm/arch-davinci, branch v2011.09

da850: modifications for Logic PD Rev.3 AM18xx EVM

2011-09-04T09:36:19Z

AHCLKR/UART1_RTS/GP0[11] pin needs to be configured for NOR to work on Rev.3 EVM. When GP0[11] is low, the SD0 interface will not work, but NOR flash will. Signed-off-by: Rajashekhara, Sudhakar Signed-off-by: Nagabhushana Netagunte Signed-off-by: Sandeep Paulraj

da850: add support to wake up DSP during board init

2011-09-04T09:36:19Z

add support for DSP wake-up by default on DA850/OMAP-L138 during board initialization. Enable hwconfig environment and added extra env setting through CONFIG_EXTRA_ENV_SETTINGS. To prevent DSP from being woken up,set the environment variable as, set hwconfig "dsp:wake=no" Signed-off-by: Sekhar Nori Signed-off-by: Nagabhushana Netagunte Signed-off-by: Sandeep Paulraj

da8xx: add support for multiple PLL controllers

2011-09-04T09:36:18Z

Modify clk_get() function in cpu file to work for multiple PLL controllers. Signed-off-by: Sudhakar Rajashekhara Signed-off-by: Nagabhushana Netagunte Signed-off-by: Sandeep Paulraj

DA8xx: fix LPSC constants

2011-08-03T10:49:19Z

Some of the LPSC constants were incorrect, and some were missing. This commit fixes the incorrect constants (which were not used anywhere in the tree) and adds all constants for both DA830 and DA850, as per the TI datasheets. Signed-off-by: Laurence Withers Signed-off-by: Sandeep Paulraj

DA8xx: switch an enum to defines for consistency

2011-08-03T10:49:19Z

There are two main sets of LPSC constants, depending on the processor family. The DA8xx constants were given in an enum whereas the non-DA8xx constants were preprocessor defines. This commit switches the DA8xx constants to defines for consistency. Signed-off-by: Laurence Withers Signed-off-by: Sandeep Paulraj

DA8xx: add MMC/SD controller addresses

2011-08-03T10:49:19Z

Signed-off-by: Laurence Withers Signed-off-by: Sandeep Paulraj

DaVinci EMAC: declare function for all DA8xx CPUs

2011-08-03T10:49:19Z

The function davinci_emac_mii_mode_sel() is defined in board/davinci/common/misc.c for any DA8xx CPU which has CONFIG_DRIVER_TI_EMAC enabled. However, the prototype was only being declared in for the DA850 EVM board. This patch declares it for all DA8xx CPUs where CONFIG_DRIVER_TI_EMAC is enabled. Signed-off-by: Laurence Withers Signed-off-by: Sandeep Paulraj

DA8xx: add generic GPIO driver

2011-08-03T10:49:19Z

Add a generic GPIO driver for the DaVinci DA8xx processors. It is turned on by defining CONFIG_DA8XX_GPIO and fulfills the generic GPIO interface specified in . The driver has support for both manipulating GPIO pins as well as automatically configuring the pin multiplexor registers to set the pin function to GPIO. Signed-off-by: Laurence Withers Signed-off-by: Sandeep Paulraj

DaVinci: rename gpio_defs.h to gpio.h

2011-08-03T10:49:19Z

In preparation for a generic GPIO driver for the DA8xx processors, rename to and fix up all files which include it. Signed-off-by: Laurence Withers Signed-off-by: Sandeep Paulraj

DaVinci DM6467: Enhance board Support

2011-02-01T23:54:44Z

Support for DM6467 was incomplete and the build failed as well. Patches were sent to the list but have not been added. This enhances the DM6467 support. Some more patches will need to be sent to bring it in line with what is available in internal TI trees Signed-off-by: Sandeep Paulraj