u-boot.git/arch/arm/include/asm/arch-exynos, branch v2012.10

mmc: s5p_sdhci: fixed wrong function argument

2012-09-05T22:33:26Z

Useless code is removed, and get buswidth value. buswidth value will be used to choice the 4bit or 8bit. (Now used 4bit mode in sdhci.c by default) Signed-off-by: Jaehoon Chung Signed-off-by: Kyungmin Park Signed-off-by: Andy Fleming

video: support exynos pwm backlight driver

2012-09-01T12:58:24Z

This patch support exynos pwm backlight driver. It can control backlight power and brightness by using pwm. Signed-off-by: Donghwa Lee Signed-off-by: Kyungmin Park Signed-off-by: Minkyu Kang

video: exynos fb driver supports display port feature

2012-09-01T12:58:24Z

If dp_enabled was set, exynos fb driver support display port feature. This patch depends on [PATCH] video: support exynos fimd driver for various exynos series. http://marc.info/?l=u-boot&m=134119605104467&w=2 Signed-off-by: Donghwa Lee Signed-off-by: Kyungmin Park Signed-off-by: Minkyu Kang

video: support exynos display port drivers

2012-09-01T12:58:24Z

This patch set supports exynos display port drivers. DisplayPort is an industry standard device to accommodate the increasing board adoption of digital display technology within the PC and consumer electronics. The interface supports internal chip-to-chip and external box-to-box digital display connections. Signed-off-by: Donghwa Lee Signed-off-by: Kyungmin Park Signed-off-by: Minkyu Kang

EXYNOS5: add display port base address

2012-09-01T12:58:24Z

This patch add display port base address for EXYNOS5. In case of EXYNOS4, use DEVICE_NOT_AVAILABLE macro because DP is not supported. Signed-off-by: Donghwa Lee Signed-off-by: Kyungmin Park Signed-off-by: Minkyu Kang

EXYNOS5: support display port phy control function

2012-09-01T12:58:24Z

This patch support display port phy control function. Signed-off-by: Donghwa Lee Signed-off-by: Kyungmin Park Signed-off-by: Minkyu Kang

video: support exynos fimd driver for various exynos series

2012-09-01T12:58:24Z

This patch supports exynos fimd driver for various exynos series different from existing it supports only exynos4 chip. Signed-off-by: Donghwa Lee Signed-off-by: Kyungmin Park Signed-off-by: Minkyu Kang

EXYNOS5 : Modify pinnumx settings as per Exynos5250 Rev 1.0

2012-09-01T12:58:23Z

This patch modifies the pinmux settings of MMC and UART as per Exynos5250 Rev 1.0. It also corrects the gpio offset calculations. Signed-off-by: Rajeshwari Shinde Acked-by: Joonyoung Shim Signed-off-by: Minkyu Kang

EXYNOS5: CLOCK: Add BPLL support

2012-09-01T12:58:23Z

This patch adds support for BPLL clock. Signed-off-by: Rajeshwari Shinde Acked-by: Joonyoung Shim Signed-off-by: Minkyu Kang

EXYNOS5: CLOCK: Modify MPLL clock out for Exynos5250 Rev 1.0

2012-09-01T12:58:23Z

MPLL clock-out of Exynos5250 Rev 1.0 is always at 1.6GHz. Adjust the divisor value to get 800MHz as needed by devices like UART etc Signed-off-by: Hatim Ali Signed-off-by: Rajeshwari Shinde Acked-by: Joonyoung Shim Signed-off-by: Minkyu Kang